Raspberry Pi Programming Mitch Neilsen ([email protected])
http://www.cis.ksu.edu/~neilsen/RaspberryPi/
Slide 2
Raspberry Pi http://www.raspberrypi.org/quick-start-guide
http://www.raspberrypi.org/quick-start-guide
Slide 3
Raspberry Pi Quick Start Guide
Slide 4
Raspberry Pi Forum
Slide 5
The MagPi http://themagpi.com
Slide 6
Raspberry Pi IV Beginners http://pibeginners.com
http://pibeginners.com
Slide 7
Slide 8
Google Coder http://googlecreativelab.github.io/coder/
http://googlecreativelab.github.io/coder/
Slide 9
Google Coder http://googlecreativelab.github.io/coder/
http://googlecreativelab.github.io/coder/
Slide 10
Google Coder http://googlecreativelab.github.io/coder/
http://googlecreativelab.github.io/coder/ coder01.local,
coder02.local,
Slide 11
Local Logistics 1.Connect Ethernet cable and plug Raspberry Pi
in to an Ethernet port near a large screen TV. 2.Connect HDMI
cable. 3.Connect AC Adapter to power it up mini USB connector.
4.Write down the IP address dynamically assigned to your Raspberry
Pi; e.g., My IP address is 129.130.11.235. 5.Use a lab machine to
connect to your Pi via a browser such as Google Chrome; e.g.,
http://129.130.11.235/.http://129.130.11.235/ 6.Add a Security
Exception when the warning is displayed. 7.Set your initial
password, and get to work.