View with images and charts
Rangs Pharmaceuticals Limited
Rangs Pharmaceuticals Ltd is committed to ensure better life through quality medicine. For this, we selected the Rangs pharmaceuticals ltd. to be trained which is already known as one of the growing pharmaceuticals in Bangladesh. We feel proud to take such a factory.
INTRODUCTION
RANGS Pharmaceuticals Ltd. is a leading edge pharmaceutical company and is a member of the RANGS Group, the largest private sector industrial conglomerate in Bangladesh. . The strategic strengths of RANGS Pharma are its strong brand recognition, highly skilled work force and diversified business mix. RANGS Pharma brands – Ostacid 500 Tablet (Calcium), Diversa Gold Tablet (Multivitamin’s and Multiminerals), E-Gold Capsule (Vitamin-E), Prevencid Capsule (Omeprazole), Antipro Suspension (Metronidazole), Oryx (1g IV Inj) (Ceftriaxone) are among the most recognized brands in the Bangladesh Pharmaceutical Industry.
RANGS Pharma manufactures a range of dosage forms including tablets, capsules, dry syrup, Suspension, Syrup, powder, Injectable Product etc. in several world-class manufacturing plants, ensuring high quality standards complying with the World Health Organization (WHO) approved current Good Manufacturing Practices (cGMP).
WAREHOUSE
Warehouse is an important part of any pharmaceuticals company. RANGS pharmaceuticals Ltd. Is one of the well known pharmaceuticals industry in Bangladesh and has many products in market. So, its warehouse also has many responsibilities. Warehouse is the place where materials are preserved and distributed.
Areas of Ware-house
1. Quarantine area:-After receiving raw and packaging materials are kept here for QA approval.
2. Released area:-After getting approval raw and packaging materials are kept here with great safety. Released area is generally the central area of ware-house.
3. In process area:- According to store requisition(SR)dispensed materials for manufacturing are kept here.
4. Rejected area:-Raw material, packaging material and finished products which are unable to get approval from QA are retained here with great safety .Usually this area is located at the corner of the warehouse.
5. Finished product area:-Generally finished products are started here for delivery to I 2 I service.
6. Special area:-It includes cool room, for heat sensitive and flammable materials.
Identification of products and raw or packaging material in Ware-house.
Raw materials and finished products are easily identified here with the help of an index which includes different code for different area also.
Packaging materials in warehouse are kept or placed following Alphabetical order.
Activities of ware-house:-
Activities of ware-house can be divided into 2 parts.
1. Routine Activities 2. Periodic Activities.
FLOW CHART of routine ware-house activities (Related to raw and packaging material)
Arrival of materials
Invoice checking
Unloading
Cleaning
Physical inspection and receipt/Discrepancy report
Quarantine storage
Log book entry / MRR for received items
Q.A sampling
QA release / reject
MRR / Failed MRR
Disposition Of released / /rejected materials
Disposition/Distribution
Computer entry of requisition / monthly inventory report.
Note: Log book entry of product includes date, “R” No. (for raw materials), “p” (for packaging materials) manufacture / supplier, purchase order No., total weight received, number and size of containers name, invoice no. etc.
DispensingIt means the materials are supplied to the production areas by weighing according to the proper document and release it from the RM store.
FIFOThe term FIFO stands for First In First Out
Handling of finished goods by Ware-house:-(It is also a routine practice of warehouse)
Finished goods transfer note from solid, liquid and antibiotics QA released tag
Verification by warehouse
VAT payment VAT challan (Musak-11)
Entry in purchase register (Musak-17)
Entry in sales register (Musak-16)
Entry in VAT current account register (Musak-18)
Balancing VAT payment register
Delivery advice for distribution
Prepare dispar dispatch Note(4 copise) prepare custom VAT challan(musak-11)
Delivery to Distribution godown
Current account reconciliation
Finished goods reconciliation
Role of warehouse in New product Launching
Production
Apply to the customsWith costing received from accountsApproval from drug administrationAnd bill of entry
Received of an applied copy
QA test & released tag
Product release
Dispensing areas of Warehouse:-
One dispensing officer always responsible for dispensing the raw materials to the production and packing materials to the packing areas. Following things must be checked by the dispensing officer.
1) Check that only approved (green tag) materials are brought to the dispensing area.
2) Check that dispensing area is completely free from others materials.3) Check that cleaning is done with IPA and savlon solution.4) Check that correct quantity and approved quality of materials are being
dispensed as per requisition.5) Check that materials come first are being dispensed first, to follow FIFO
(First In First Out).
Documentation in Dispensing:-
Documentation includes,
a) Serial numberb) Product name and codec) Product batch numberd) Requisition entrye) Cleaningf) Material exit g) Remarksh) Tagsi) Signature of authorized person etc.
Inventory Functions of Warehouse:-
Inventory
After reading MRR to QA department materials will be kept pending list in computer
After getting released from QA department product will be at Normal inventory
Stock will be deducted from stock against S.R.(Store requisition) after dispensing.
PRODUCTION
Production area of RANGS pharmaceuticals are divided in to some major part. Production areas are –
Tableting area Coating area Blistering area Capsule filling area s Packaging printing area
PRODUCTON ACTIVITY
TABLETING AREA
Tablet manufacturing and design is the most important, challenging and also critical process. To maintain its correct amount of drug(s) in the dosage form, extra care and alertness is essential in the tablet manufacturing process. Tablet constitutes a major class of dosage form. RANGS Pharmaceuticals produces commercial batch by validating the processes. . They follow
o cGMPo SOP ando BMR during tablet manufacturing.
SOME BASIC REQUIREMENTS FOR SUCCESSFUL TABLET MANUFACTURING
This pharmaceutical follows some basic requirements for quality tablet production. Such as:
Processing
GranulationCompressionTablet coatingLiquid bulkManufacturingFillingPacking
Finished product
Warehouse – 2
Dispensing
Warehouse – 1
Design
During our training period in tablet section we observed that solid manufacturing section is well designed. They have-
Separate rooms for different operations.
There are two separate entrances for personnel and material respectively.
Air lock doors. The operators don’t open the two doors simultaneously.
Rooms are partitioned by transparent glass, which facilitates visual inspection from adjacent and far rooms.
Floor and walls have no sharp edges which prevents dust deposition.
Floor is painted by epoxy paint.
Rooms include within the tablet section are:
Hand washing, shoe cover & gown wearing room.
Office room for production officers.
Solution preparation room.
Coating room
Dispensing room.
Store
Granulation and blending room
Equipment store (mainly die and punch are stored here)
Compression room
Capsule filling room
Facility
For cGMP RANGS Pharmaceuticals have some essential facilities in solid manufacturing area. They have-
Adequate space for separate operation Adequate electricity supply HVAC system PW (Process Water) supply HPS (High Pressure Steam) supply ICA (Instrumental Compressed Air) Supply Vacuum line Pressure differential gauze. Positive air pressure. Telephone Generator
Equipment
Advanced machine are available in tablet manufacturing unit. For using equipments following points are maintained:
Safety card: provides safety instructions to machine operators.
Labeling: describes state of operation. As for example: MACHINE LABEL: TO BE CLEANED, CLEANED, UNDER TEST, UNDER PROCESSING etc.
Machine logbook.
Proper cleaning of the machine.
List of authorized persons.
Personnel
All the process is validated in RANGS. In solid manufacturing unit, highly trained, experienced and skilled personnel are involved in tablet manufacturing i.e. Granulation, compression, and coating RANGS is rich in skilled persons in tablet section. They are serving for the company for a long period.
For the health and safety of the operators RANGS provides:
Gowning
Mask
Shoes
Ear protector
Shoe cover
Glovess
Different Solid Manufacturing Unit
The different solid manufacturing units are:
Dispensing unit Granulation unit
o Dry granulationo Wet granulation
Compression unit Coating unit
The manufacturing unit sends a demand paper according to their need, to the warehouse. Central Dispensing Unit weighs the required amount of active ingredient & excipients and then sends it to the manufacturing unit. Manufacturing unit received and rechecked it. Raw materials must be approved from QC department before dispensing.
Dispensing unit
Coating unit
There are two types of granulation:
1. Dry granulation2. Wet granulation
STEPS OF GRANULATION PROCESS
After proper blending granules are stored in a container and then it is delivered to the compression unit. Before compression some parameters are checked:
Proper cleaning of machine. Proper arrangement of die and punch. Removal of all the material relevant to previous product HVAC system. Dust collecting system Humidity Temperature Pressure differential Granules are poured into hopper
Coating is one of the important steps after compression. Reasons for coating-
o Stability o Taste masking o Elegance etc.
Granulation unit
From dispensing unit
Active ingredient & Excipients
Granulation unit
Mixing of Active ingredient & Excipients
Milling (size reduction & sieving)Drying
Further milling Blending
Compression unit
TYPES COATING DONE BY RANGS
Sugar coating Film coating:
Aqueous coating Organic solvent coating
Enteric coating.
TABLET TESTAfter compression and coating tablets are delivered to QC for some test.
The tests are: o Appearanceo Weight variation o Friability o Disintegration time testo Dissolution testo Thicknesso Hardness
Capsule
It is a solid or liquid dosage form which is manufactured by enclosing into capsule shell.
Types of capsule shell:1. Hard gelatin capsule shell and2. Soft gelatin capsule shell.
RANGS pharma manufacture capsules by using hard gelatin capsule shell and also liquid capsules.
Instrument used for manufacturing capsules:1. Auto capsule filling and sealing machine: It consists of-
o Capsule shell hoppero Rectifier o Granules or pellet hopper.o Filling stationo Sealing stationo Rejecting station.o Discharge station.
2. Capsule sorter3. Blending apparatus
Manufacturing process:
Granulation
Blendingpellet
Filling
Sealing
Monitoring or sorting
Blistering
PackagingPrecaution:
Incase of capsule manufacturing the following precaution should maintain for the stability of capsule shell:
1. Temperature must below 25 ºC.2. Moisture must below 50%.
In this unit powder and pellets are just filled into shell.
LISTS OF INSTRUMENTS USED IN PRODUCTION
1. Rapid Mixer granulator (RMG-400) Type: CPMRMG 400 Capacity- 250 KG Origin: INDIA
2. Solace Aero Dryer Capacity- 120 KG Origin: INDIA
3. Blending Machine V- Blender
4. Crashing Machine
5. Double Rotary Tablet Compression Machine Type: CPM D3 Origin: INDIA
6. Semi Auto Capsule Sealing Machine Pam Pharmaceutical And Allied Machinery Company Pvt. Ltd. Origin: INDIA
7. Automatic liquid Filling M/C LF 40 Pam Pharmaceutical And Allied Machinery Company Pvt. Ltd.
Origin: INDIA
8. Coating Machine Name: N.R. Coater Origin: Thailand Capacity: 60 kg
9. Coating Machine Name: N.R. Coater Origin: Thailand Capacity: 50 kg
10. Pest preparation Vessel Capacity: 80 kg
11. Blister-1 HOONGA Model: Ministar – N5 Capacity: 60 RPM Power Supply: 380 Volt. Weight: 2600 kg Origin: Korea
12. Blister-2 HOONGA Model: Ministar – N5 Capacity: 60 RPM Power Supply: 380 Volt. Weight: 2600 kg Origin: Korea
13. Capsule and Tablet Bottle Filling Maximum: 90 RPM
14. Ampoule filling washing Machine
PACKAGING AREA
Solid drugs (Tablets, Capsules) are packed in this section. Two types of packing materials are used here.
1. Primary Packing MaterialsThese materials actually come into the contact of products; such as aluminium foil, PVC film, PVDC film etc.
2. Secondary Packing MaterialsThese materials do not come into the contact of the product rather they provide extra protection and facilities for transport and use. These materials include-
Printed cartoon Fiberboard outer Filament partition Liner Cellulose tape
Packing Machines
There are two types of machines for packing products. Blister packing machine and Strip packing machine. There are a few strip-packing machines among which one is used for striping. The Blister packing machines are kept inside separated rooms to maintain healthy environment as well as safety. Each of the rooms is facilitated with individual Air Conditioning System.
MACHINE USED IN BLISTERING PURPOSE
There are some blistering machines used. Machines are gives following
o Blister Packing Machineo Blister Packing Machine
PROCESS OF BLISTERING
Blister packing is the most common practice in RANGS. Most of the products are packed in this method. Usually PVC film and Aluminium foil are used for this purpose. And Al-Al also is used for some heat and light sensitive products. The steps involved in Blistering are:
Rolling of PVC Pocket formation by heat and vacuum pressure Transfer of tablets or capsules in the pockets Sealing of the pocket by Aluminium foil using heat Printing over the foil if required Perforation of the strips Cutting of the strips.
The strips are checked for any kind of leakage every half hourly. The instrument used is-This machine is operated at 380-400 mm Hg pressure for two and half minutes. After completion of blistering, the finished strips are then sent to the packing lines. There the following steps are done-
Feeding Laying Visual checking
Cartoon making Inserting Flap closing and Tapping Outer making and filling Outer closing.
Finally the finished packets are sent to warehouse after Quality Assurance approval.
PARENTERAL AREA
INSTRUMENTS USED IN PARENTERAL PRODUCTION
1. Most – heart sterilization
Temperature control: 121° C for 15min Sterile materials –
a) Rubber stroper b) Flip of seal c) Filling ampoule d) Contact parts
2. Dry Heat sterilizer:
Temperature control; 260°C/200°C Sterile materials –
a) Ampoule – 200°C for 1 hr.b) Vial – 250° C for 30 min.
3. Burring washing machine:
Rubber stroper.
4. Distillation chamber:
Temp: 300°C Stilmass – Italy.
5. Laminaire.
6. Manufacturing vessel.
7. Holding vessel.
8. Lyophilized Microscope
9. Lyophilizers Sterilization process:
1. Vials are usually sterilized or depyrogenation by using dry heat sterilizer at 250 ºC for 30 mins.
2. Garments, gloves, machine parts or equipments are sterilized by 121 ºC for 15 mins.
AREAS OF STERILE DEPARTMENT
Class AArea under laminar airflow
Class B Aseptic filling roomClass C Aseptic manufacturing & terminal fillingClass D Terminal product manufacturing
1. Bottle washing2. Dispensing3. Other area of class 10,000
Class E1 Material entry, inspection & sterilization
Class E2 Packaging
Visiting site: Ampoules (Injection)
Ampoules: Ampoules are special type of container used for WFI or RANGS preparations.
Ampoule department of Beacon Pharma:
RANGS pharma has a well established and strong ampoule filling and sealing department in non-cepha building. The most highlighted point is that it has the largest and more efficient filling and sealing machine which is completely automatic.
Instruments used for injections (ampoule manufacturing):1. Auto ampoule filling and sealing machine.2. ampoule washing machine3. Autoclave4. Dry heat sterilizer5. Charge vat6. Cartilage filter unit
Mechanism of ampoule washing:
Ampoules are placed manually on tray
Passed through change box to ampoule washing room
Ampoules tray are placed in washing machine whereA flash of DM + WFI flows from upper and lower part Of the machine
After certain period it is removed and the ampoules are replaced from that tray toanother tray
Performed dry heat sterilization for Depyrogenation at 260 ºC for 2.5 hrs.
Allowed to cool and remove it for filling And sealing in aseptic area
Mechanism of filling and sealing:
Ingredients are charged in charge vat in normal area
Allowed to pass through cartilage filter ( 0.2 µm)Unit and collected into storage vessel in aseptic area
Then ampoules are filled from these Vessels by the following ways
Injectable solutions or WFI are collected by The pipe of auto filling and sealing machine
Ampoules are placed on feed pan
Ampoules move towards nozzle by the help of conveyer system
At first ampoules are flashed by nitrous oxide gas
filling
Pre heat by flame
Sealing
Terminal sterilization
Packaging
Important notes:o Pressurized system is used for charging, passing through cartilage filter unit, filling
etc.o Terminal sterilization is not performed for heat sensitive substances. Ex- vitamin
preparations.o Filling and sealing is performed under laminar air flow unit under aseptic condition.
Visiting site: Injection (vials)
Injection (vials):Vials are sterile glass containers whose volume up to 15 ml. This volume also may be up to 30 ml. usually vials are widely used for injectable preparations.
Instruments used for injectable vials:
1. Washing machine.2. Dry heat sterilizer.3. Autoclave.4. Auto filling and sealing machine.5. Auto labeling machine.6. Auto vial blistering machine.
Process of washing:
Place vials on inspection platform
Charge inverter nylon arm
Wash with the flash of Demineralized water (DM) water And Water for injection (WFI) from upper and lower parts
Air dry
Wash with DM water
Air dry
Wash with WFI
Final air dry
Then discharge inverter nylon arm
Placed on tray for depyrogenation
Manufacturing process:
Receive ingredients
Deboxing
Passed through change box under laminar air flow
Filling and sealing in aseptic condition
Finally blistering and packaging
Types of packaging materials:
1. Primary packaging materials: it includeso Glass vials (7.5 ml or 15 ml)o Rubber stoppero Flip off seal
2. Secondary packaging materials: It includes-o Comb packo Leafleto Disposable syringeo Baby needleo Butterfly syringeo Inner cartoon
o Master cartoon
MICROBIOLOGICAL LABORATORY
The department of Microbiology performs the role of immense importance to follow the cGMP and to formulate as well as to implement the SOPs. RESPONSIBILITIES
The overall activity profile of the microbiological section of QC department of RANGS can be presented briefly in the following way------
INSTRUMENTS US
INST INSTRUMENTS USED IN MICROBIOLOGICAL ASSAYRUMENTS USED IN MICROBIOLOGICAL ASSA
Particle counter Air sampler Incubator (Hot / Cool) Vortex mixture Centrifuge machine
Microbial count
Pyrogen test (LAL test) sterility test
Environmental study
Preservative efficacy test
Validation
Pyrogen hygiene test
Bioassay
Penicillin cross contamination study
Water, Raw materials. Bulk samples, finished products (sterile) packaging
containers
Water, injectables.raw materials, other sterile products
All manufacturing & filling areas including aseptic filling room.
Finished pack samples, preservatives
Steam & dry heat sterilization, oven cleaned equipment
All production area operation
Antibiotic, raw materials, comparative study of other antibiotics
Penicillin in environment & non-penicillin production area
Water bath Freeze to preserve bacteria Air born particle counter Colony counter Microscope Laminar flow machine Hot oven Dust collector Autoclave Balance LAL testing kit High precision bath
The 3 tests are done here.
1. Receiving inspection.2. In process inspection.3. Final inspections.
INSTRUMENTS USED IN THIS LAB
1. Laminar air flow –
Total bacterial count. Fungal count. Pathogen test of non-parenteral products.
2. Particle analyzer.
3. Batch sampler.
4. Cooled incubator Temp. 22° C
5. Incubator Temp for 37° C for bacterial culture.
6. Freez for microbial culture.
7. Dry heat sterilizer.
8. Autoclave.
9. Laminere air flow for sterility testing.
MEDIAS
Broth media :
o TSB.
o Macconkey broth media.o Lactose broth.
Agar media:
o TSA – Bacteria test.o MEA – Fungus test.o MCA – Pathogen test.
Microbiological testing procedure for different products are performed as follows –
For Parenteral products:
o Sterility test.o Pyrogen test.
For Raw Material :
For specified raw materials – By pour plate method.
Environmental study:
o RCS air sampler.o Settle plate.
QUALITY ASSURANCE DEPARTMENT
Quality Assurance department is responsible for assuring that the quality policies adopted by a company are followed and in most organizations it serves as the contact with regulatory agencies and are the final authority for product acceptance or rejection. It also helps to prepare the standard operating procedures (SOP) related to the control of quality
Quality assurance means the sum total of the organized arrangements made with the object of ensuring that products will be at the quality required by their intended use. It is thus GMP plus factors outside the scope of ISO guidelines.
The function of QA starts from raw materials and continues up to released products. The function of QA in a pharmaceutical is given below.
BEFORE PURCHASING
Environment of the suppliers are also sensitive for purchasing of raw materials. QA checks the environment before purchasing the active pharmaceutical ingredients (API).
IN WARE HOUSE
Identification of raw materials (RM / PM)
Check the quality by QC Orientation of raw materials. Orientation of packaging materials. QA inspection and report submission to the head of QC. Sampling for,
o Lab sample.o Microbiological sample.o Retention sample.
Released and rejection works of raw materials and packaging materials.
IN PRODUCTION AREA
■ Before starting of manufacturing the cleaning operation or change over of machineries is cheeked by the Q.A.
■ Line clearance.■ In process QC.■ For solid production the following tests are done –
o Weight variationo Hardnesso Thicknesso Diametero Friabilityo Disintegration Test
■ For L.C.O.-
o Weighto Volume checking.
IN ASEPTIC AREA
Air particle monitoring, microbiological tests (swap test), water test and treatment are done by microbiological department under the supervision of QA.
IN PACKAGING AREA
■ QA officer give the line clearance for starting of packaging operation after assuring the following points:
o Absence of product of previous order.o Absence of packaging material belonging to the previous order.o Cleanliness.
■ QA officer check the batch no. Mfg. & Expiry date.■ Random checking of blister & strip.■ Random wt. checking for cream and ointment.
■ Random volume checking for liquid during filling.■ Check of inner and shipping cartoon.■ Evaluation and repacking of accidental damaged goods.
QULALITY CONTROL
Now a days the manufacturing of Pharmaceuticals is quite complex & there also arise some responsibilities; for example ethical, legal and economic responsibilities. These responsibilities are immensely important for the production, control & marketing of quality products. A systematic checking from the raw materials in process, Packaging materials, labeling & finished products can ensure quality products. This is the Prime concern of the industrial Quality & Compliance Department. The Concept of total Quality refers to the process of striving to produce a perfect product by a series of measures requiring an organized effort by the entire company to prevent or eliminate errors at every stage in the production. During our training part in QC, we observed that RANGS performs almost everything that ensures quality of medicine
Quality control (QC) is one of the major and global concerns for the entire sector in any industry or company. It is the combination of skills personnel, valided method, part of GMP which is concerned with sampling, specification and testing to ensure that the necessary and relevant taste are carried out and that materials are not released for used until the quality has been judged to be satisfactory. This part is responsible for chemicals test, identification, and separation of any sample.
Quality control department involved with the raw materials testing, stability testing, and calibration of all apparatus, microbiological testing, analytical development and validation, documentation and routine analysis, bulk sample testing and packaging materials.
OPERATION PERFORMED BY QC LABORATORY ARE DESCRIBED AS FOLLOWS:
TESTS FOR RAW MATERIALS
Physical properties (appearance, solubility etc) Assay Other specified tests like identification (chemical and photometric), determination of
purity, optical rotation, water content determination.
IN PROCESS QC
Quantitative assay Disintegration test pH Viscosity test Weight / ml for liquids Microbiological assay Weight variation tests Environmental monitoring
FOR FINISHED PRODUCTS
Description Assay Specified identification test Leak test Disintegration test for coated tablets Stability test
TESTS FOR PACKAGING MATERIALS
Packets Printing error test, Length, width of secondary packing materials, Lock bottom test, Defection of gluing, Wide color variation.
Cap Color, Printing, Weight, Length, diameter of wad, Length from top to the cut mark.
Bottle Length, Diameter of neck and body, Weight, Over flow capacity, Light transmission test.
Aluminum Foil Thickness of Al foil, Weight at gm / sq. inch, Printing conditions.
Label Conditions of color printing, Quality of paper, Checking of spelling and any types of error.
Tubes, Spoon and Dropper Types of rubbers and droppers, Measurement about quantity for spoon, Class of glass for tubes.
INSTRUMENTS / APPARATUS USED IN QC DEPARTMENT
There are various types of sophisticated instruments are used for the purpose of quality maintaining. The instruments are
SI NAME OF THE MACHINE QTY (Nos)
MANUFACTURER ORIGIN
01 HPLC – PC based, Binary Gradient 01 Shimadzu Corporation Japan 02 Atomic Absorption Spectrometer – PC
based 01 Shimadzu Corporation Japan
03 FTIR – PC based (IR Prestige -21) 01 Shimadzu Corporation Japan 04 UV – visible Spectrometer – PC 01 Shimadzu Corporation Japan 05 Vacuum Pump 0106 Laminar Air Flow 0107 Digital Hardness, Thickness & Diameter
Tester 01
08 Moisture Analyzer 0109 PH Meter 0110 HPLC – PC based, Isocratic 01 Shimadzu Corporation Japan11 Karl Fischer 0112 Dissolution Apparatus 0113 Disintegration Apparatus 0114 Friability tester 0115 Incubator (30º to 70ºC & 0º to 60 ºC)-2 set 0216 Digital Autoclave for Microbiology – 85
Litres 01
17
18
Pharmaceutical Refrigerator
Electrical Microscope
01
01
ROLE OF QC IN PUECHASING RAW MATERIAL The samples of raw materials from suppliers (demanded by procurement department) are
tested by the Q.C department & if the sample meets the specification, them the sample is ready for approval. The approval comes from Q.A department after submission of the Q.C test reports.
After approval of the sample, the supplier asked for raw material, raw materials are tested, if the quality complies, the procurement department buys the raw material.
Raw materials are kept in the quarantine are a during the testing of the supplied sample& after testing if everything complies to the standard demands then it is shifted to the store & labeled as approved.
TEST PERFORMED FOR RAW MATERIALSAccording to GMP each raw materials should be tested for conformity with specification for identity, strength, purity and quality parameters. The quality control department .of RANGS performs the following tests on raw materials -------
Appearance Odor Identification- (melting point, UV/ VIS method, IR absorption spectrum method.) Solubility Refractive index Wt.per ml/specific gravity Chloride/bulk density Loss of drying Residue of ignition/sulfated ash Specific rotation/acid value Viscosity/iodine value Saponification value Acidity/alkalinity Oxidizing /reducing agent Microbial count Assay
TEST FOR PACKAGING MATERIALFor ensuring better safety and attractiveness of packaging materials QC department conduct the following tests of packaging materials –
LABEL1. Grain direction: The label is kept on water in a pot and observed that it is properly rolled or not. After a while it will be opened to indicate that it is passed.2. The printing, the expire date, batch no and other items are checked and compared to a standard one.3. The color and size are also checked against a standard.
CARTOON1. The color and text are compared with an approved standard.2. Proper gumming or gluing check3. Strength of the cartoon is checked in gram/sq. meter4. Proper locking check5. Flap cut checking
VIALS 1. Alkalinity2. Thickness3. Cap diameter4. Proper aluminum seal
FOILSThe color, the plastic layer and the thickness are compared with a reference standard.
COLLAPSIBLE TUBESa. Textureb. Specification measurementc. Inside lacquering testd. Latex seal check
e. Presence of Aluminum seal
RUBBER CLOSUREa. pHb. Stickinessc. Toxicityd. Ash contente. Densityf. Alkalinity
AMPULES:a. Surface and sometimes-total alkalinityb. Thicknessc. Heightd. Breaking pointe. Volume
CAPPrinting, color, diameter, height etc are checked.After packaging of the product, packed materials such as strips, ampoules, blisters, bottles etc are checked for accuracy. It is not possible to check all the products of a batch. Random sampling on the basis of the following rule checks them√N+1
Where N=no of containerAfter sampling every sample is checked. Usually three types of mistakes are checked———1. Critical: this is the problem, which cannot be overlooked. E.g.-DAR No. (Drug administration registration number).If DAR is wrong the whole batch will be discarded.2 Major: For this type of problem reprocessing is possible. E.g.-spelling mistake.3. Minor: Simple mistakes which can be overlooked.
TEST FOR FINISHED PRODUCTGMP specification
a. For each batch of drug product, there should be appropriate laboratory determination of satisfactory conformance to its finished product specification prior to release.
b. Drug products failing to meet the established specifications and other relevant quality criteria should be rejected. Reprocessing may be performed if possible but the reprocessed product should meet all the specification and other quality criteria prior to its acceptance and release.
Finished product should be checked in the laboratory by suitable procedures. These tests are designed to determine compliance with specification and hence arc critical factor for the QC department.
Each lot of products is tested to ensure identity, quality, purity and potency. Q.A authorizes the releases for further processing based on actual physical, chemical & biological laboratory testing
The following tests are performed here for the finished product-
FOR SOLID DOSAGE FORMo Parameter checked—o Descriptiono Identityo Diametero Thicknesso Uniformity of weighto Average weighto Maximum individual variationo Hardnesso Friabilityo Disintegration timeo Assayo Percent stated dose
IN PROCESS QC
To assure batch-to-batch uniformity and integrity of the products, written procedures describing sample taking, the controls and tests or examinations is conducted on in process products of each batch should be established and followed. Such control is intended to monitor the product yield and validate the performance of the production process that may be responsible for causing variability in the characteristics of in process products.
The following in process quality control procedures are adopted
IPC for Manufacturing Section: -
Product Tests performedTablet Wt. Variation Friability Disintegration
Dissolution Hardness Thickness
Capsule Wt. variationMoisture contentSealing
Liquids Bottle volumeSterile products Over all supervision for all steps performed
by the operators whether they complies or not with the SOPs.
ADMINISTRATION
The main function of administration is to manage the distribution of the right person in the right position for highest/more benefit or productivity. This department move to reduce the
problems or conflicts within the employees. This is called the Transition that may be done positively or negatively.
FUNCTION
Human Resource Department mainly shows its functions on-■ Payroll,■ Employee relations and welfare,■ Training,■ Planning and counseling.
This department maintains the direct contact with all the employees working in the-
■ Laundry,■ Canteen,■ Cleaning,■ Gardening,■ Security,■ Transport.
Here direct supervision, controlling and monitoring are maintained.
This department has indirect supervision on –
■ Leave,■ Salary,■ Provident fund,■ Gratuity,■ Medical,■ LFA (leave, fair and assistance).
HEALTH AND SAFETY MANAGEMENT
By keeping environment clean and pollution free RANGS Bangladesh is maintaining a very healthy environment. Also the natural scenario adds boost to the working environment. They provide in house medical facilities through Medical Center and in house Doctors. The medical center is well equipped with systems to manage emergency situations.
In an industrial area Safety is the most important issue and RANGS is providing safety to each sector of the organization. It has a good security system.
IMPLEMENTATION OF ADMINISTRATION
Positive Thinking Group Approach Transparent Communication Shared and cared Grievances Practices of Creativity Open door policy
MAINTENANCE DEPARTMENT
The engineering department of RANGS proceeds with a group of engineers, technicians and workers. Engineering department is composed of the following section:
1. Work-shop.2. Engineering store room.3. Boiler room.4. Water distillation plant.5. Chemical plant –
Propanolol hydrochloride.Chloroquine phosphate
6. Central plant A.C.7. ETP (Effluent Treatment Plant )
The function of this section is to operate the utilities and services in the plant. They also perform the maintenance functions. The utilities and services handled by this section include-
o Electricityo Potable or Drinking watero Steam Boilero Air compressoro HVAC Systemo Central Vacuum System &o Calibration Department.
The following instruments are available in the engineering section.
Power Supplyo Generators.
Capacity: 600 Kws.
Transformer.
Boiler (BYWORTH) Origin- UK
DM Water Plant Origin- Ion Exchange (India) Limited
Air Compressor: Manufacturer - Atlas Copco HVAC system :
OUR VIEW
The global pharmaceutical industry is currently in a state of flux. Imminent patent expiries, growing generic competition and drug failures are combining to create significant cost issues
for pharmaceutical companies, compelling them to cut expenditure on product development without compromising on quality and RANGS never compromises with quality.
One of the major challenges facing Pharma companies is that their profit margins do not reflect the constantly increasing investment in drug development. On the one hand, this factor has acted as a key driver for pharmaceutical companies' growing interest in cost-effective excipients.
Frost & Sullivan believes that the changing definition of excipients from inactive ingredients to functionally active materials has contributed and will continue to contribute tremendously to bring out success. Biotechnological developments and various emerging protein-based therapies are broadening the definition for excipients products.
During our visit we found huge number of female employees working in RANGS in
different positions. RANGS believes in empowerment of female.
All the employees are very helpful and co-operative.
Facilities provide by the excellent for the workers and the working environment is friendly. All the workers are efficient enough to carry out their respective duties as they are trained up regularly. All these make workers to work with smiling face.
They provide us food facilities.
All machineries and the written procedures (BMR, MI, and PR etc) are validated and calibrated regularly to ensure the best quality of the products.
Internal audit is done all the year round. This helps to improve the performance, fixing the errors.
UNIQUE FEATURES OF RANGS LIMITED IN TAJGAON DHAKA
Top Related