8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
1/14
CUSTOMER : SENER Ingenieria Sistemas, S.A.
PROJECT : Catalytic Gasoline 1 and 2 for Minatitlan
RFQ. NO. : C227A41-SR-PM2-RQ-001
EQUIP. : COLUMN & REACTO
LOCATION : MINATITLAN, MEXICO
TEL : +82-31-680-9340 FAX : +82-31-680-9397
#584-6, Manho-ri, Poseung-eup, Pyeongtaek-si, Gyeonggi-do , 451-821, Korea
Poseung National Industrial Complex,
HEAD OFFICE & FACTORY
QUOTATION
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
2/14
Date
RFQ. No.
Client Job No.
Quot. No.
No. Issued Proposal Documents Title Revision Page Purpose Remark
1 Quotation Sheet 0 1 Quotation
2 Item List of Quotation 0 1 Quotation
3 Quotation Terms and Conditions 0 8 Quotation
4 Equipment Packing List 0 1 Quotation
QUOTATION DOCUMENT LIST
Catalytic Gasoline 1 and 2 for MinatitlanSep. 25th 2009
C227A41-SR-PM2-RQ-001
-
WHC-CR09-B646 (R.0)
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
3/14
Customer : SENER Ingenieria Sistemas, S.A.
Project : Catalytic Gasoline 1 and 2 for Minatitlan Date : Sep. 25th 2009
RFQ. No. : C227A41-SR-PM2-RQ-001 Quot. No. : WHC-CR09-B646 (R.0)
Time of Delivery : Within 14 months after receipt of P/O Person in charge : ILSOK KANG
Del ivery Condit ion : FCA. Wooyang HC Shop (Pyeongtaek in Korea) Director of Overseas Business Dep't
Terms of Payment : See Quotat ion Terms & Condi ti ons (Page 2) e-mai l : i [email protected] r
Validity : October 24th 2009 TEL. : +82-31-680-9340
Dear Sirs ,
We are pleased to quote you the following i tems subject to the term and condit ions as follows ;
NOTE
1. Price for Clips attached to PLATFORM, LADDER and PIPING will be adjusted after completed fabrication drawings.
(Quotation weight is specified at price list.)
2. US$4,500.00 of unit p rice per tons (Carbon steel) of clips wi ll be applied at cost adjustments .
3. Drawing and Documentation wil l be in English language.
4. According to EN10204, Ceriticates 3.1 will be applied to all the materials including consumable.
3 ASME CODE STAMP & CE MARK LOT 1 INCLUDED
$7,093,510.00
QUOTATION(REV.0)
PRESIDENT, CBO / KEON JONG, PARK
1,130.1
$7,910.00
INCLUDED
Spare Parts for Commissioni ng and Start-up. LOT
CLIPS ATTACHED TO PLATFORM,
LADDER AND PIPING
GRAND TOTAL SET
1
NO.
1
2
Q'TYUNITDESCRIPTION
COLUMN & REACTOR SET
7.9
1,130.17
1LOT
AMOUNT (US$)UNIT PRICEW'T (Ton)
$7,085,600.00
$6,500.00
1 SPARE PARTS FOR TWO(2) YEAR OPER. LOT 1 $20,000.00
2
7
4
TON 1PLATFORM & LADDER
3 FOB Pyeongtaek Port in Korea LOT 1
OPTIONAL PRICE
Very truly you rs,
$755,900.00
584-6
Poseung National Indus trial Comp lex, #584-6
Manho-ri, Poseung-eup, Pyeongtaek-si,
Gyeonggi-do, 451-821, Korea
TEL : +82-31-680-9300 FAX : +82-31-680-9397
http://www.wooyang.co.kr
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
4/14
Customer : SENER Ingenieria Sistemas, S.A.
Project name : Catalyt ic Gasol ine 1 and 2 for Minat it lan
RFQ. No. : C227A41-SR-PM2-RQ-001
Equipment : COLUMN & REACTOR Date :
>>> THE LAST ITEM
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
5/14
Page. 1 OF 8
CUSTOMER : SENER Ingenier ia Sistemas, S.A.
PROJECT : Cataly ti c Gasol ine 1 and 2 for Minat it lan
RFQ. NO. : C227A41-SR-PM2-RQ-001
ISSUED DATE : Sep. 25th 2009
( Total 8 page included this cover sheet )
1st ISSUED
DESCRIPTION CHECKED
D.J.LEE
APPROVEDPREPAREDREV.NO. DATE
0 Sep. 25th 2009
WHC-CR09-B646 (R.0)
QUOTATION TERMS AND CONDITIONS
Quot. No.
RFQ. No. C227A41-SR-PM2-RQ-001TECHNICAL PROPOSAL
2
J. W. BAEKD.H.NOH
1
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
6/14
Page. 2 OF 8
GENERAL AND COMMERCIAL TERMS AND CONDITIONS.
ITEM AND QUANTITIES
The following equipment shall be furnished in accordance with the requirements specified in this requisition and the
documents/drawings referred hereto.
COMMERCIAL TERMS AND CONDITIONS
Price
1-1. Total amount : See attached quotation sheet
1-2. The value added tax in not included in this quoted price and should be reimbursed in addition to
this price by the purchaser in case it is levied on.
Terms of Payment
Down Payment : 20% of P.O priced after receipt of purchase order
Progress Payment : 30% of P.O priced after receipt of main material
Progress Payment : 45% of P.O priced after on shipment
Final Payment : 5% of P.O priced after final document
Validity
This quotation is valid until October 24th 2009
Thereafter, this is subject to our confirmation.
Delivery
Time of Delivery : Within 14 months after receipt of P/O
Delivery Condition : FCA. Wooyang HC Shop (Pyeongtaek in Korea)
NOTE : Ar ticle mark (
) shall apply to the EQUIPMENT to be supplied by the vendor and/or
shall be included in the vendor's scope of supply.Ar ticle mark ( )are not applicable and excluded f rom the vendor 's scope of supp ly.
1130.17ALL ITEMS COLUMN & REACTOR Refer to the data sheet
Q'TY EMPTY W'T (Ton)MAIN MATERIALDESCRIPTIONITEM NO.
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
7/14
Page. 3 OF 8
1. CODES AND STANDARDS
1.1 Design Code and standards
ASME Code sec. VIII, Div.1 (Latest Edition)
ASME Code sec. VIII, Div.2 (Latest Edition)
ASME SEC.IX : Welding & Brazing
ASME SEC.V : NDE
ASTM & ASME SEC. II : Material
ANSI B16.5 for 24" flanges and smaller
ASME 16.47 Series "B" for 26" to 60"
WRC Bulletin 107/297
Wind Load & Seismic Code
TEMA Class "R", "C" & "B"
PD5500 (former BS5500)
API Standards 650
API Standards 660
JPI Code & Standards
JIS B8243 Construction of Pressure Vessel
JIS B8249 Construction of Heat Exchanger
1.2 Codes & Stamp
Not Required
Required
ASME Code and Stamp
ISO Certification
OHSAS 18001
CE Mark
1.3 Materials Code
1) Pressure Parts
ASME ASTM KS JIS BS DIN
2) Non-Pressure Parts
ASME ASTM KS JIS BS DIN
1.4 Pipe Code
ANSI KS JIS BS DIN
1.5 Fitting Code
ANSI KS JIS API BS DIN
1.6 Measuring Uni t
MKS Unit SI Unit US Unit
1.7 Local Regulation and Rules
High Pressure Gas Control Law in Korea (HPGCL)
Energy Utilization Rationalization Law in Korea (EURL)
Korea Industrial Safety and Health Law (KISHL)
Government approval in accordance with local regulation & lawsCanadian Registration Number (CRN) from ABSA, CSA B54)
Manufacture License of Special Equipment (People's Republic of China)
European Community Pressure Equipment Directive (PED 97/23/EC)
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
"H""U" "U2" "S" "PP"
9001 9002 14001
(
)
( )
( )
( )
( )
( )
cfe
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
8/14
Page. 4 OF 8
2. SCOPE OF WORK AND SUPPLY
2.1 Scope o f Work
1) Engineering and Design
Thermal and Hydraulic Performance Calculation
Mechnical Strength Calculation in accordance with Applicable Code & Regulation
Fabrication Detail DrawingsLadder & Platform Drawing (Optional price per sheet US$250.00)
2) Fabrication
Fabrication
Shop Fab. Job-Site Pre-fabrication at Shop
Post Weld Heat Treatment or Stress Relief per Code and Spec.
Insulation Work
Assembly of internal at shop
Tray Trial Assembly at Shop Demister
Tray Assembly Top Flow Distributors
Wire mesh Screens Bed Support
Grating for Packing Support Catalyst Support
Support Plate for packing Support Internal coil w / Support
Hold Down Plates Outlet collect
Packing Perforated Cylinder
Others indicated on data sheet & engineering drawing
Supervision Work and Fee at Shop & Field
Internal Lining & Coating
P.T.F.E Lining
Rubber Lining (3T)
Refractory Lining worksField construction and work
Supervision for Assembly Work Refractory Work
Supervision for Erection Work Painting Work (at Field)
Temporary Work Attaching Work for Internals and Externals
Foundation Work Utilities for Site Works (Water, Electric, Air etc.)
Equipment Erection Work Installation Work of Platform and Ladder
Insulation Work
2.2 Scope of supply
Equipment proper with standard accessories
Equipment body and directly welded supports & auxiliaries
Support Rings and lugs for body attachments
Internals Removable Part & Equipment attachments and Accessories
Trays Demister
Packing & Packing Support Downcomer Bars
Support Grid & Bed Limiter Downcomer bottom Floors
Feed pipe type Distributor Seal Pan
Hold Down Grating Perforated Plate
Re-Distributor Internal V-Anchor (Refractory)
Gas Injection plate Chimney Tray
Bed Support Beam Outlet Collector Internal Pipe Inlet distributor
Mesh Screen Internal ladder rungs for maintenance
Vortex Breaker Internal Baffle With Support
Support clips and ring for loose internal
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
(
)( )
( )
( )
( )
( )
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
9/14
Page. 5 OF 8
Equipment Attachments for Shell & Tube Heat Exchanger
Expansion joint Baffle and Support plate
Tie Rod & Spacer Sealing Strip
Bearing Pad For Support Dummy Rod
Anode
Jack bolts for girth flange & cover flange
Test Ring for Heat Exchanger (If Required) Setting bolts & nuts for stacked heat exchangers
Shim plate(3t,3t,6t) for stacked heat exchangers
Impingement plate, Weir plate, Stilling baffle
Bolts/nuts and Gaskets between nozzles for stacked heat exchangers
Pulling eye bolts for tube sheet of removable bundles with shoulder pug
Others parts indicated on data sheet & engineering drawing
External accessories for equipment as follows and included for indicated on drawings or data sheet.
Support clips for platform, ladder & piping
Support ring & clip for insulation
Fire Proofing lugs on skirt In / Out side and uninsulated bottom head
Earth Lug
Name plate with brackets
Lifting lugs and tailing lugs
Stiffener Rings
Top Angle
Reinforcing beam of skirt base block for equipment erection
Others parts indicated on data sheet & engineering drawing
Others
Anchor or Setting Bolts and Nuts (if required)
Sliding Plate, Liner and Lubrite Plate (if any)
Blind Flange and its Bolt, Nut and Gasket for Blind Nozzle
Companion Flange with Bolt, Nut and Gasket
Template and Gauge Plate for Anchor bolt
Welding Rod for Site Work
Special Tools, Jigs and Fittings for Owner's field Erection Works, if Any
Steam Trace Coil with Coil Supports
Valves and Gauges
Sight Glass (if any)
Spray Nozzle
Water Spray System Inter Connecting Duct
Vent/Drain Nozzle on Tube Sheet (to be Vertical Exchanger)
Others parts indicated on data sheet & engineering drawing
Davit
Top davit
Manhole Davit or Handhole Hinge
Heat Exchanger Davit
Platform and Ladder
Platform Packing (Wooden skid type)
Ladder Grating (Zinc Galvanized)
Handrail Checke Plate Type
Spiral Stairway Painting (Primer coat only for C.S part)
( )
( )
( )
( )
( )
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
10/14
Page. 6 OF 8
Agitator for Reactor & Drum
Motor
Mechanical Seal
Agitator with Impeller
Invertors
Running Test for Agitator
Equipment Accessories Flame Arrester Heating Coil
Breather Valve Emergency cover
Gauge Hatch Level Gauge
Suction Heater
2.3 Materials supplied by the purchaser
Not to be supplied by the purchaser
The following materials to be supplied by the purchaser
Please, refer to our attached "Quotation condition sheet"
3. INSPECTION AND TEST
The inspection and test shall be executed in accordance with the application codes and standards
Radiographic & Ultrasonic Test per Code & Spec.
Impact test per Code, if required
Magnetic Particle & Liquid Penetration Test per Code
Hardness Test per Code & Spec.
Hydrostatic test per Code & Spec.
Required Inspection per Code and Spec.
Material Certificates
Raw Material inspection included impact test per Code & Spec.
Material identification
Welder's & welding operator's performance qualification test per Code & Spec.
Welding procedure qualification test per Code & Spec.
Edge preparation inspection per Code & Spec.
Liquid penetrant examination and/or Magnetic particle examination per Code & Spec.
Visual and dimensional inspection
Leakage test per Code & Spec.
Vacuum Test per Code & Spec.
Pneumatic test on reinforcement pad per Code & Spec.
Rust prevention & painting inspection per Code & Spec.
Mechanical running test for agitator per Code & Spec.
3rd party inspection 3rd party inspection fee
4. PACKING FOR SHIPPING AND TRANSPORTATION
Nozzle opening
Blanked and protected with steel cover
Blanked and protected with wooden cover
Body
Packed in case
Packed in crate
Packed on skid (Wooden Skid)
Spare parts
Packed in case
Packed in crate
( )
( )
( )
( )
( )
( )
( )
( )
( )
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
11/14
Page. 7 OF 8
5. RUST-PROOFING AND PAINTING
5.1 Shipping Preparation
Rust prevention of inner surface
VCI 309 or Eq.( Volatile Corrosion Inhibitors )
Desiccant
Drying out & cleaning work at shop
N2 gas (0.2kg/cm2) padding with pressure gaugeBuffing
Electric Polishing
Surface preparation of outer surface for c.s part and low alloy steel parts
SSPC-SP-3 Power tool cleaning
SSPC-SP-6 Commercial blast cleaning
SSPC-SP-10 Near white blast cleaning
To be done as per the customer's specification
Surface preparation of surface for stainless steel parts
Pickling or Acid cleaning
Passivation
5.2 Painting of outer surface
Rust-proof painting of 1 coats
Inorganic zinc primer (D.F.T 75 )
To be painted as per the customer's specification
Finish painting
Not to be painted
To be painted as per the customer's specification
6. SPARE PARTS
Not to be supplied
Supply as defined below
Supply of Gasket
Gasket for Girth Flange % %
Gasket for Manhole % %
Gasket for Blind Nozzle % % Gasket for Spare Nozzle % %
Gasket for Hand hole % %
Gasket for Agitator conn. Flange % %
Supply of Bolt and Nut
Bolt and Nut for Girth Flange % ( Min % ( Min
Bolt and Nut Manhole and Handhole % ( Min 2 % ( Min 2
Bolt and Nut for Blind Nozzle Flange % ( Min 2 % ( Min 2
Bolt and Nut for Agitator conn. Flange % ( Min % ( Min
Bolt and Nut for F.Bearing & M.Setting % ( Min % ( Min
Bolt and Nut for Internal Flange % ( Min % ( Min
Supply of others
Sight Glass % ( Min % ( Min
Mechanical Seal % ( Min % ( Min
Tubes % ( Min % ( Min
100
10
sets)
( )
sets)
sets)
sets)
10 sets)
sets)
sets)
sets)
sets)
10
sets)
sets)
sets)
sets)
sets)
10
( )
( )
( )
( )
sets)
sets)
sets)
sets)
Two(2) year operation
spare part
Construction &
Commissioning spare part
( )
100
( )
( )
200
200200
100
#350 #400
( )
( )
#80 #200 #250 #300
as an option
( )
( )
( )
( )
( )
( )
Part Name
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
12/14
Page. 8 OF 8
7. GUARANTEE
Manufacturer will guarantee the equipment from defective materials, workmanship and
manufacturer design for a period of 12months after the equipment has been placed in
operating, or 24months after date of shipment from manufacturer's work shop,
whichever comes earlier, and such damage of injury be proved to be clearly attributable to
the manufacturer's responsibility after discussion between the purchaser and manufacturer,
the manufacturer will supply free of charge, only replacing parts of damaged parts included
in the manufacture's scope of supply of FCA. Wooyang HC Shop (Pyeong basis and,
if necessary, dispatch, free of charge, only a supervisor required for the repair work.
Mechanical design and guarantee
8. DOCUMENTS TO BE SUBMITTED AFTER CONTRACT / AFTER COMPLETION OF MANUFACTURING
Reference to job spec. & Vendor data requirement list
Fabrication Procedure
Loading Data
Assembly Drawing
Fabrication Detail Drawing
Parts Drawing
Strength Calculation
Spare Parts List
Welding Procedure
Inspection and Test Procedure
Inspection and Test Record
Inspection Certificate
Manufacturing Schedule
Packing List
Shipping Schedule
Sub-vendor List
9. DEVIATIONS FROM THE CUSTOMER'S SPECIFICATION
This specification includes no deviations from the customer's specification.
Refer to attached Deviation and clarification list".
10. ATTACHED DOCUMENT
Deviation and Clarification List
Mechanical Data SheetMaster Schedule
Spare Part List
Design Data For Quotation
11. OUT OF SCOPE OF SUPPLY
Foundation and Civil work Loose Internal
Unloading at site - Trays, Downcomer, Seal Pans. Chimney Tray, etc
Painting works at site for final painting - Catalyst, Ceramic Ball, Support Grid. Etc
Insulation material and work - Distributor, Holdown Grid, Chimnat Tray etc.
Fire proofing material and work Platform & Ladder
Anchor bolt / nut
( )
( )
( )
( )
(
)
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
13/14
RFQ. NO. C227A41-SR-PM2-RQ-001
CUSTOMER COLUMN & REACTORPROJECT NAME Catalytic Gasoline 1 and 2 for Minatitlan
WEIGHT()
ERECTION SKIRT
FULL WATER SADDLE
239,200 SA533-A CL.1(N) SA533-A CL.1(N) SA533-A CL.1(N) 3.0 18 22 10.5+F.V 245
3,700 50,700 SA533-A CL.1(N) SA533-A CL.1(N) 3.0 28 / 40 48
679,600 SA204-B(N)+
SS304L CALD
SA204-B(N)+
SS304L CALD
SA204-B(N)/
SA516-70N 0.0
33+3 /
40+3 /
55+3
39+3.5 24.6+F.V 400
3,700 71,100SA204-B(N)+
SS304L CALD
SA204-B(N)+
SS304L CALD 0.0
75+3/
95+3/
110+3/
127+3
150+3.5
25,100 SA516-60N SA516-60N SA516-60N 3.0 15 18 24.6+F.V 150
1,000 19,900 SA516-60N SA516-60N 3.0 25 30
64,900 SA516-60N SA516-60N SA516-60N 3.0 14 15 9.0+F.V 330
2,100 28,200 SA516-60N SA516-60N 3.0 22 / 30 36
87,300 SA516-60N SA516-60N SA516-60N 3.0 16 19 9.0+F.V 330
3,100 27,900 SA516-60N SA516-60N 3.0 20 / 25 30
5,300 SA516-60N SA516-60N SA516-60N 3.0 10 COVER 9.0+F.V 150
700 20,800 SA516-60N SA516-60N 3.0 10 12
28,700 SA516-60N SA516-60N SA516-60N 5.0 31 37 24.6+F.V 343
2,600 8,000 SA516-60N SA516-60N 5.0 31 37
1,130,100
SKIRT (8,700H)
558.0 0 501 DA-8101 CD HYDRO
COLUMN 1
SKIRT (2,650H)
47.0 0 157 DC-8301 POLISHING
REACTOR 1
SKIRT (4,700H)
8.0 0 126 DA-8302 VENT GAS AMINE
ABSORBER 1
5 DA-8301
NAPHTHA
STABILIZER
COLUMN
1
SKIRT (10,300H)
218.0 0 25
SKIRT (10,500H)
100.0 0 30 4 DA-8203 H2S STRIPPER 1
SKIRT (7,500H)
16.0 0 303 DA-8202
CD HDS RECYCLE
GAS AMINE
ABSORBER
1
SKIRT (9,300H)
777.0 0 145/85/502 DA-8201 CD HDS COLUMN 1
I.D
(mm)
TL~TL
(mm)
SHEEL
(TOP/BOTTOM)
HEAD
(TOP/BOTTOM)
C.A()
(S/H)
MDMT
()
TH'K DESIGN COND.
SHELL
(mm)
HEAD
(mm)
SKIRT
(mm)
PRESS.
(Kg/cm2 G)
TEMP.
()
EQUIPMENT DATA SHEET
SENER Ingenieria Sistemas, S.A.
NO. ITEM NO. DESCRIPTION Q'ty
TYPE
VOL.
()
MATERIAL
8/11/2019 Quot for Sener Minatitlan RQ-001 C&R (09-B646) (25thSep.09)
14/14
PROJECT : Catalytic Gasoline 1 and 2 for Minatitlan
CUSTOMER : SENER Ingenieria Sistemas, S.A.
MANUFACTURE : WOOYANG HC CO., LTD.
LOADING PORT : C227A41-SR-PM2-RQ-001 DATE :
(W x H x L)
6.4 x 6.9 x 42.7
6.4 x 6.9 x 42.7
8.3 x 8.8 x 50.4
4.2 x 4.7 x 58.0
4.2 x 4.7 x 59.0
4.2 x 4.7 x 60.0
4.2 x 4.7 x 61.0
Sep. 25th 2009
239.5 1,885.6 1,885.6
DIMENSION (M) MEASURE ()
TOTAL
WEIGHT (TON)
GROSSNET
PROFORMA PACKING LIST
1 WOOD SKID 1,204.1
6
T O T A L
7 DC-8301
10,265.0890.9 892.76
DA-8302 1
DA-8201 1
5 DA-8301 1
4 DA-8203 1
1,164.7
1,184.4 1,184.45.3 5.6
28.7 29.0 1,204.1
1,164.7
1,144.9
679.6 679.9 1,885.6 1,885.6
25.1
64.9 65.2 1,144.9
25.4
PER P'KG
3,681.2 3,681.2
NO. ITEM NO.Q'TY
(SET)P'KG STYLE
3 DA-8202 1
2
1 DA-8101 1
87.6
WOOD SKID
WOOD SKID
WOOD SKID
WOOD SKID 87.3
WOOD SKID
WOOD SKID 239.2
Top Related