This is to attest that
QATAR INDUSTRIAL LABORATORIES W.LL INDUSTRIAL AREA, ST. NO. 43
GATE 127, P.O. BOX 10415 DOHA
QATAR
Testing Laboratory TL-528
has met the requirements of the IAS Accreditation Criteria for Testing Laboratories (AC89), has demonstrated compliance with ISO/IEC Standard 17025:2005, General requirements for the competence of testing and calibration laboratories, and has been accredited, commencing November 23, 2015, for the test methods listed in the approved scope of accreditation.
(see laboratory’s scope of accreditation for fields of testing and accredited test methods)
This accreditation certificate supersedes any IAS accreditation bearing an earlier effective date. The certificate becomes invalid upon suspension, cancellation or revocation of accreditation. See http://iasonline.org/More/search.html for current accreditation information, or contact IAS at 562-364-8201.
C.P. Ramani, P.E., C.B.O President
Page 2 of 28 TL-528, Qatar Industrial Laboratories W.LL
IAS Accreditation Number TL-528
Accredited Entity Qatar Industrial Laboratories W.LL
Address Industrial Area, St. No. 43
Gate 127, P.O. Box 10415
Doha, Qatar
Contact Name Mr. Fasee Ahmed
Manager
Mr. Shaikh Rafique
QA/QC Manager
Mr. Kunhammad Ayakkandi
Senior Technician
Telephone +974 50726408 / 70186899
Effective Date of Scope June 27, 2016
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Aggregate ASTM C 136/C 136M-15
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Doha Laboratory
1- Balance S/N: Q/BL/029 2- Sieves S/N: Q/SV/072, Q/SV/070, Q/SV/071, Q/SV/198, QSV/293, Q/SV/294 3- Oven S/N: 14E133
Shakul M-019 Rahoof-M-099
BS EN 933-1:2012
Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method
Doha Laboratory
1- Balance S/N: Q/BL/029 2- Test sieves S/N: QIL/SV/024, Q/SV/106, Q/SV/026, Q/SV/027, Q/SV/013, Q/SV/029, Q/SV/030, Q/SV/207, Q/SV/006, Q/SV/033 3- Oven S/N: 14E133 4- Trays 5- Sieve shaker
Doss M-121 Sherin M-144
BS 812 - 109-1990
Testing aggregates. Methods for determination of moisture content
Doha Laboratory
1- Balance S/N: Q/BL/029 2- Container 3- Oven S/N: 14E133 4- Scoop 5- Thermometer S/N: 140501865
Shibi-M-065 Doss M-121
ASTM C 128-15 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
Doha Laboratory
1- Balance S/N: Q/BL/029 and Q/BL/011 2- Oven S/N: 14E133 3- Wire basket 4- Air tight container 5- Sieves S/N: Q/SV/072, Q/SV/070, Q/SV/071, Q/SV/198, QSV/293, Q/SV/294 6- Buoyancy table
Doss M-121 Safihan M-146
Page 3 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Aggregate
ASTM C 127 -15 Determination of density, relative density and absorption of coarse aggregate
Doha Laboratory
1- Water tight container 2- Balance S/N: Q/BL/029 and Q/BL/011 3- Oven S/N: 14E133 4- Thermometer S/N: 140501865 5- Scoop 6- Glass plate 7- Gas jar 8- Pycnometer S/N: QIL/SG/C701 9- Vacuum desiccator
Doss M-121 Safihan M-146
ASTM C 142-10 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
Doha Laboratory
1- Balance S/N: Q/BL/029 2- Container 3- Sieves 4- Oven S/N: 14E133
Sherin M-0144 Rahoof M-099
BS 812 - 112:1990
Testing aggregates. Method for determination of aggregate impact value (AIV)
Doha Laboratory
1- Impact test machine S/N: QIL/AGG/AIV/01 2- Sieves S/N: Q/SV/042, Q/SV/200, Q/SV/087 3- Balance S/N: Q/BL/029
Shibi M-065 Chinthaka M-198
ASTM C 131/C 131M-14
Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
Doha Laboratory
1- Los Angeles abrasion machine S/N: QIL/LOS/001 2- Sieves 3- Balance S/N: Q/BL/029 4- Charge
Sherin M-0144 Rahoof M-099
ASTM D75-14 Standard Practice for Sampling Aggregates
Doha laboratory
1. Shovel 2. Bag
1. Naseer - M-255 2. Shibi Abdulsathar Habeebulla- M-065
BS EN 1367-2:2009
Tests for thermal and weathering properties of aggregates. Magnesium sulfate test-Soundness test
Doha laboratory
"1. Balance Q-BL-029 2. Tray 3. Sieves 4. Oven Q-OV-011 5. Thermometer Q-TM-180 6. Density Hydrometer QIL-MMS-01"
1. Shakul Ameeth - M-019 2. Rouf Vp - M-099
BS EN 1097-2:2010
Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation CL 5
Doha laboratory
1. LAA machine QIL/STP/13 2. Sieves 3. Oven Q-QV-011 4. Balance Q-BL-029
1. Shibi Abdulsathar Habeebulla - M-065 2. Arun Pandiya - M-182
Page 4 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY
STD. NO./ METHOD/ISSUE
DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Aggregate
ASTM D5821-13 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
Doha laboratory
"1. Balance (Q-BL-029) 2. Sieves 3. Tray 4. Caliper (Q-VC-019)"
1. Shakul Ameeth - M-019 2. Athul Reddy - M-253
ASTM D546-10 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
Doha laboratory
1. Sieves 2. Oven (Q-OV-011) 3. Balance (Q-BL-033)
1. Vishnu - M-274 2. Arun Pandiya - M-182
AASHTO T304-15
Standard Method of Test for Uncompacted Void Content of Fine Aggregate
Doha laboratory
1. Sieves 2. Oven (Q-OV-11) 3. Balance (Q-BL-33) 4. UVC Apparatus (Q-VOID-AGG-01)
1. Athul Reddy - M-253 2. Naseer - M-255
Asphalt
BSEN 12697-36:2003
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the thickness of a bituminous pavement
Doha Laboratory
1- Vernier caliper S/N: C1201170552 2- Metal ruler or Tape S/N:Q/R/11
Samantha M-166 Nishanka M-222
ASTM D 2726/D 2726M-14
Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
Doha Laboratory
1- Balance S/N: Q/BL/011 2- Water bath S/N: QIL/WB/01 3- Oven S/N: QIL-OV-009 4- Thermometer S/N: Q-TM-180
Samantha M-166 Ajith M-142
ASTM D 70-09e1 Standard Test Method for Density of Semi- Solid Bituminous Materials (Pycnometer Method)
Doha Laboratory
1- Pycnometer S/N: QIL/PEN/02 2- Water bath S/N: QIL/WB/01 3- Thermometer S/N: Q-TM-180 4- Balance S/N: 711059003 5- Beaker
Mario-M-118 Ajith M-142
ASTM D 2172/D 2172M-11
Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
Doha Laboratory
1- Oven S/N: QIL-OV-009 2- Pan 3- Balances S/N: 711059003 4- Hotplate S/N: QIL/MUF/01 5- Graduated cylinders 6- Ignition dish 7- Desiccator 8- Extraction machine S/N: Q-ASPH-03
Samantha M-166 Ajith M-142
BS EN 12697-2:2015
Bituminous mixtures. Test methods. Determination of particle size distribution
Doha Laboratory
1- Sieves 2- Balance SN: 71105905 3- Drying Oven SN: QIL-OV-009
Jayantha M-113 Nishanka M-222
Page 5 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY
STD. NO./ METHOD/ISSUE
DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Asphalt
BS EN Asphalt 1427:2015
Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method
Doha Laboratory
1- Ring & ball apparatus/N:QIL/BIT/SOFT/01 2- Pouring plate 3- Ball centering guide 4- Thermometer S/N: Q/TM 180 5- Timing device /N: Q/STP/24 6- Hot plate S/N: Q/HTP/04
Mario-M-118 Ajith M-142
ASTM D 6927-15 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
Doha Laboratory
1- Marshall testing apparatus S/N: Q/PVG/03 2- Flowmeter 3- Water bath S/N: QIL/WB/01 4- Oven S/N:Q-OV-014 5- Thermometer S/N: Q-TM-180 6- Steerer 7- Balance S/N: 711059003
Samantha M-166 Nishanka M-222 Ajith M-142
ASTM D 6926-10 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
Doha Laboratory
1- UoMld 2- Extractor 3- Marshall compactor Asset NO: Q/MCO/AUM/01 4- Containers 5- Oven; Asset No. Q/OV/09 6- Thermometer 7- Mixing tools 8- Balance; Asset No: Q/BL/11 9- Scoop
Samantha M 166 Nishanka M 222 Ajith M-142
ASTM E 1703/E 1703M-10
Standard Test Method for Measuring Rut- Depth of Pavement Surfaces Using a Straightedge
Field Test 1- Measuring device S/N: 2- Straight edge S/NTN 9037, Q/VC/13: TN6269
Saamantha M-166 Nishanka M-222 Ajith M-142
ASTM D 2041/2041M-11
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
Doha Laboratory
1- Vacuum bowl 2- Flask 3- Balance S/N: Q/BL/011 4- Pump 5- Pressure monitor S/N: 5558 and VG-01 6- Thermometer S/N: Q/TM/180 7- Water bath S/N: QIL/WB/01 8- Oven 9- Agitator
Saamantha M-166 Nishanka M-222 Ajith M-142
Page 6 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Asphalt
BS EN 1426:2015
Bitumen and bituminous binders. Determination of needle penetration
Doha Laboratory
1- Penetrometer S/N: Q/ASP/PEN/02 2- Needle 3- Sample Container 4- Water bath S/N: QIL/WB/01 5- Transfer disk 6- Timing device 7- Thermometer S/N: Q/TM/180
Mario M-118 Ajith M-142
ASTM D 6925-15 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Super pave Gyratory Compactor
Doha Laboratory
1- Super pave gyratory compactor: Asset No. Q/SGC/O1 2- Balance; Asset No. Q/BL/11 3- Thermometer 4- Specimen mold
Nishanka M-222 Nilantha M-199 Samantha M-166
AASHTO T312-2014
Preparation and determination of relative density of Asphalt mix specimen using Super pave gyratory compactor
Doha Laboratory
1- Super pave gyratory compactor: Asset No. Q/SGC/O1 2- Balance; Asset No.. Q/BL/11 3- Thermometer 4- Specimen mold
Nishanka M-222 Nilantha M-199 Samantha M-166
ASTM D 2950/D2950M-14
Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
Field Test 1- Nuclear Gauge: Asset No. H-1739
Jamal M-010 Murthy M-12 Rajeev M-016
ASTM D6-11 Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
Doha laboratory "1. Loss on heating oven - Q-ASP-LOH-01 2. Cup 3. Balance Q-BL-045 4. Oven (Q-OV-114)"
1. Ajith - M-142 2. Samantha - M-166
ASTM D4402-15 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
Doha laboratory "1. Rotational viscometer - (QIL-RVIS-01) 2. Balance (Q/BL/001) 3. Stop Watch TN13400) 4. Drying Oven (Q-OV-114)"
"1. Ajith - M-142 2. Mario - M-118 3. Samantha"
ASTM D979-15 CL 6.3.3
Standard Practice for Sampling Bituminous Paving Mixtures
Doha laboratory 1. Shovel 2. Tray 3. Bags 4. Thermometer (Q-TM-207)
1. Ajith - M-142 2. Mario - M-118
ASTM E 303-13 Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
Doha laboratory 1. Skid resistance apparatus Model A113 (SN A113-HE-0037)
1. Shibi Abdulsathar Habeebulla - M-065 2. Nihal - M-023
Page 7 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY
STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S RELEVANT
SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Asphalt ASTM D5444-15 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
Doha laboratory 1. Sieves 2. Balance (Q-BL-011) 3. Oven (Q-OV-009) 4. Container
1. Jayantha - M-113 2. Nishanka - M-222
Soil
ASTM D 1557:2012 e1
Determination of Dry density /Moisture content/Correction of unit weight
Doha Laboratory
1- Moulds 2- Automatic compactor Q/MDD/AUM/01 3- Balance Q/BL/48 4- Oven Q/OV/11 5- Sieves 6- Scoop 7- Straight edge
Safihan M-146 Rahoof M-099
ASTM D 4318:2010
Liquid Limit and plasticity index
Doha Laboratory
1- Liquid limit device QIL/CSG/01 2- Flat grooving tools 3- Gauge 4- Container 5- Mixing & storage container 6- Glass plate 7- Spatula 8- Oven Q/OV/005
Doss M-121 Chinthaka M-198
ASTM D 6938:2010
In-situ Density Test(Nuclear Method)
Field Test 1- Nuclear machine Q/NUCR/01 2 -Survey meter 3- Drive pin guide plate 4- Opener 5- Film badge 6- Safety barricade cover 7- Pouring cylinder
Jamal Yogimadathil M-010 Rajeev M-016
ASTM D 1556:2015
Field Density (Sand Replacement)
Field Test 1-Sand cone density apparatus Q/SAND/ASTM/01 2- Base plate 3- Balance Q/BL/37 4- Calibrating containers 5- Oven Q/OV/005 6- Speedy moisture tester Q/MOI/03
Rajeev Manoj M-158 Tobi M1144
ASTM D 2419-14 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Doha Laboratory
1- Graduated Cylinders 2- Measuring Tin 3- Sieves 4- Funnel 5- Bottle 6- Shaker S/N: Q/SET/1 7- Stop Watch S/N: Q/STP/11, Q/STP/13, Q/STP/27 8- Oven S/N: Q/OV//005 9- Balance S/N: Q/BN/029
Safihan M-146 Abdulla M-233
Page 8 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FAC Field Test ILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED OPERATORS/ TECHNICIANS
Soil
BS 1377-1:1990 Soil Sampling 1- Shovel 2- Splitter Q/R/O1
Sherin M-144 Rahoof M-099
BS 1377-2:1990 Methods of test for soils for civil engineering purposes. Classification tests Clause 5: plasticity index CL 4 Liquid Limit
Doha Laboratory
1- Balance S/N: 7111059003 2- Sieves 3- Oven S/N: Q-OV-005 4- Containers 5- Scoop 6- Riffle box 7- Spatulas 8- Glass plate 9- Wash bottle 10- Straight rod 11- Cone penetrometer S/N:QIL/PEN/02 12- Casacarande apparatus S/N: Q/VC/007 13- Desiccator 14- Linear shrinkage UoMld 15- Thermometer S/N: S/N: Q/TM/180
Doss M-121 Chinthaka M-198
BS 1377-2 Section 9:1990
Soil Sieve Analysis/Mat finer than 75 micron
Doha Laboratory
1- Balance Q/BL/029 2- Sieves 3- Oven Q/OV/11 4- Containers 5- Scoop
Arun Pandiyan M-182 Shibi M-065
BS 1377-9 :1990
Methods for test for soils for civil engineering purposes. In-situ tests – Clause 2.5 In-situ Density Test(Nuclear Method)
Field Test 1- Nuclear machine S/N: 8550 2 -Survey meter 3- Drive pin guide plate 4- Opener 5- Film badge 6- Safety barricade cover 7- Pouring cylinder
Jamal Yogimadathil M-010 Rajeev M-016
BS 1377-9:1990 Methods for test for soils for civil engineering purposes. Clauses 2.1 & 2,2 - In-situ tests Field Density (Sand Replacement)
Field Test 1- Sand cone density apparatus S/N: Q/SAND/POUR/200/7 2- Base plate 3- Balance S/N:Q-BL-037 4- Calibrating containers 5- Oven S/N: Q-OV-005 6- Speedy moisture tester
Rajeev Manoj M-158 Tobi M-144
Page 9 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Soil
BS EN 933-8:2015
Sand Equivalent Value of soil and fine aggregates
Doha Laboratory
1- Graduated cylinders 2- Test plunger assembly 3- Sieves 4- 500 mm Rule 5- Shaker Q/SET/01 6- Stop watch Q/STP/13,27,11 7- Balance Q/BL/29
Sherin M-144 Rahoof M-099
BS 1377-9:1990 Non Repetitive Plate load test
Field Test 1- Loading device 2- Hydraulic jack Q/PG/17 3- Load cell 4- Bearing plate 5- Deflection beam 6- Data acquisition system
Mr. Fadi G-04 Mr. Nishfar G-059
ASTM C702-11 Standard Practice for Reducing Samples of Aggregate to Testing Size
Doha laboratory
1. Tray 2. Riffle box 3. Shovel 4. Scoop 5. Sieves
1. Shibi Abdulsathar Habeebulla - M-065 2. Naseer - M-255
ASTM D2216-10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
Doha laboratory
1. Oven (Q-OV-11) 2. Balance (Q-BL-029) 3. Container 4. Desicator
1. Shakul Ameeth - M-019 2. Ansari - M-260
ASTM D6913-09 Particle Size Distribution Doha laboratory
1. Sieves 2. Balance (Q-BL-029) 3. Oven (Q-OV-011) 4.Tray
1. Shibi Abdulsathar Habeebulla - M-065 2. Rouf Vp - M-099
ASTM D1140-14 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
Doha laboratory
"1. 75um Sieves 2. 425 um Guard Sieve 3. Balance Q-BL-029 4. Oven Q-OV-011 5.Tray"
1. Shibi Abdulsathar Habeebulla - M-065 2. Rouf Vp - M-099
ASTM D4718-15 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
Doha laboratory
"1. Sieves 2. Balance Q-BL-029 3. Oven Q-OV-011 4.Tray"
1. Athul Reddy - M-253 2. Shakul Ameeth - M-019
ASTM D4944-11 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
Doha laboratory
"1. Speedy moisture apparatus (Q-MOI-05) 2. Balance (Q-BL-024) 3. Stop Watch Q-STP-27"
1. Ansari - M-260 2. Arun Pandia - M-182
ASTM D4429-09 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
Field Test 1. Jack 2. Proving Ring (Q-PVG-06) 3. Plunger 4. Dial gauge (Q-DG-92) 5. Balance (Q-BL-29) 6. Oven (Q-OV-11)
1. Sameer - G-043 2. Nishfar - G-059
Page 10 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY
STD. NO./ METHOD
/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Soil BS 1924-2:1990 Method of Test for Cement Stabilized Materials CL 1.3.3, 1.3.7, 1.4.4, 1.4.5, 1.4.6, 2.1.4, 3.1 & 4.2
Doha laboratory
1. Oven (Q-OV-11) 2. Balance (Q-BL-29) 3. Container 4. Scoop 5. Palette Knife 6. Cone penetrometer (QIL-PEN-02) 7. MDD Molds 8. Rammer (Q-RAM-11) CBR/K)9. CBR Molds (BS/ 10. CBR Machine (Q-CBR-02) 11. Compression machine (Q-COM-06) 12. Nuclear gauge (H-8449)
"1. Shakul Ameeth - M-019 2. Rouf Vp - M-099"
Concrete BS EN 12390-3:2009
Testing hardened concrete. Compressive strength of test specimens
Doha Laboratory
1- Compression machine S/N: Q/COM/01
Danushka M-102 Naveen M-038
BS EN 12390-1:2012
Shape and dimensions for specimens
Doha Laboratory
1- Caliper 2- Straight edge 3- Feeler gauge 4- Try square
Danushka M-102 Naveen M-038
BS EN 12390-7:2009
Testing hardened concrete. Density of hardened concrete
Doha Laboratory
1- Weighing scale S/N: 8334320013
Danushka M-102 Naveen M-038
ASTM C 138/C 138M-14
Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Doha Laboratory
1- Density pot S/N: 4130882746 2- Tamping rod S/N: QIL/CROD/04 3- Scoop 4- Glass plate 5- Balance S/N: QIL/BL/029
Lahiru M-131 Diluksha M-109
BS 1881-122:2011
Determination of water Absorption in Hardened concrete
Doha Laboratory
1- Drying oven S/N: QIL/OV/017 2- Curing tank 3- Balance S/N: Q-BL-029 4- Desiccator
Chandana M-036 Nihal M-23
BS 6717-1:2001 Compressive Strength of paving blocks
Doha Laboratory
1- Compression machine S/N: Q/COM/01 2- Vernier caliper S/N: QIL/VC/010 3- Steel Ruler
Nihal M-023 Isuru M-117
BS EN 1338:2003
Concrete paving blocks. Requirements and test methods
Doha Laboratory
1- Compression machine S/N: Q/COM/01 2- Tensile Frame 3- Ruler
Nihal M-023 Isuru M-117
Page 11 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD
/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Concrete ASTM C 231/C231M-14
Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
Field Test/Lab
1- Air meter S/N: 4130882746 2- Spray tube 3- Trowel 4- Mallet 5- Tamping rod S7N: QIL/CROD/04 6- strike off plate
Naveen M-038 Chandana H. M-035
ASTM C 1202-12
Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
Doha Laboratory
1- RCP apparatus S/N: QIL/RCP/01 2- Vacuum desiccator 3- Vacuum pump S/N: Q-VAC-02
Nihal M-023 Chandana M-036
BS EN 12390-8:2009
Testing hardened concrete. Depth of penetration of water under pressure
Doha Laboratory
1- Water penetration apparatus DE-PI-0015, Q/VC/1
Chandana M-036 sriyantha M-210
BS EN 12504-4: 2004
Testing concrete. Part 4: Determination of ultrasonic pulse velocity
Field Test 1-.Ultrasonic Pulse Velocity Proceq -HW 83; SN>327400100
Ajay M-133 Lahiro M-131 Ropero M-027
Aggregate BS 812 - 103.1 :1985
Testing aggregates. Method for determination of particle size distribution. Sieve tests- Clauses 7.2 & 7.3
Doha Laboratory
1- Sample divider Q/R/01 2- Oven 14E 133 3- Balance Q/BL/29 4- Test sieves 5- Mechanical shaker 6- Container
Rahoof-M-099 Shakul M-019
BS EN 932 - 1:1997
Tests for general properties of aggregates. Methods for sampling
Field Test 1- Shovel 2- Sample bags 3- Riffle box Q/R/01
Doss M-121 Rahoof M-099
BS 812-102:1989
Testing aggregates. Methods for sampling
Field Test 1- Scoop 2- Containers 3- Splitter Q/R/01
Doss M-121 Rahoof M-099
ASTM C 117:2013
Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Doha Laboratory
1- Balance Q/BL/29 2- Sieves 3- Container 4- Oven Q/OV/05
Doss M-121 Shakul M-019
BS 812 - 109:1990
Testing aggregates. Methods for determination of moisture content
Doha Laboratory
1- Balance 2- Container 3- Oven 4- Scoop 5- Thermometer
Shibi M-065 Doss M-121
BS 812 - 2:1995
Testing aggregates. Methods for determination of density- Clauses 5.3, 5.4 & 5.5
Doha Laboratory
1- Balance Q/BL/11 2- Oven Q/OV/005 3- Wire basket Q/WIR/SG/03 4- Air tight container 5- Sieves 6- Buoyancy table
Doss M-121 Safihan M-146
BS EN 933 - 3:2012
Tests for geometrical properties of aggregates. Determination of particle shape. Flakiness index
Doha Laboratory
1- Test sieves 2- Corresponding bar sieves 3. Balance Q/BL/029
Doss M-121 Shakul M-019
Page 12 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Aggregate BS 812 - 105.1:1989
Testing aggregates. Methods for determination of particle shape. Flakiness index
Doha Laboratory
1- Riffle box Q/R/01,02 2- Balance Q/BL/029 3- Test sieve 4- Flakiness Gauge Q/FLK/01
Sherin M-0144 Rahoof M-099
BS 812 - 105.2:1990
Testing aggregates. Methods for determination of particle shape. Elongation index of coarse aggregate
Doha Laboratory
1- Riffle box Q/R/01 2- Balance Q/BL/029 3- Test sieve 4- Elongation gauge Q/ELG/01
Sherin M-0144 Rahoof M-099
BS EN 933-4 :2008
Tests for geometrical properties of aggregates. Determination of particle shape. Shape index
Doha Laboratory
1-Proportional caliper -Q-S-VC-09 2- Balance - Q/BL/48 3- Sieves
Sherin M-0144 Rahoof M-099
ASTM D 4791:2010
Flat particle, elongated particle, flat and elongated particle
Doha Laboratory
1- Riffle box Q/R/01 2- Balance Q/BL/029 3- Test sieve 4- Metal length gauge Q/ELG/ASTM/02
Doss M-121 Shakul M-019
BS 812 - 121:1989
Testing aggregates. Method for determination of soundness
Doha Laboratory
1- Test sieves 2- Balance Q/BL/29 3- Container 4- Oven Q/OV/05 5- Density hydrometer 6- Desiccator 7- Thermometer Q/TM/180
Shibi M 065 Rahoof M-099
ASTM C 88-13 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
Doha Laboratory
1- Sieves 2- Container 3- Wire basket 4- Thermometer Q/TM/180 5- Balances Q/BL/029 6- Oven Q/OV/005 7- Hydrometer
Shibi M-065 Rahoof M-099
BS 812 - 111:1990
Testing aggregates. Methods for determination of ten per cent fines value (TFV)
Doha Laboratory
1- Steel cylinders 2- Tamping rod 3- Balance Q/BL/029 4- Test sieve 5- Compression testing machine Q/COM/01 6- Cylindrical metal measure QIL/AGG/TFV/01 7- Oven Q/OV/005 8- Metal tray 9- Drying cloth 10- Water tight container
Shakul M-019 Chinthaka M-198
Page 13 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Aggregate ASTM C 535:12
Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
Doha Laboratory
1- Los Angeles abrasion machine QIL/LOS/01 2- Sieves 3- Balance Q/BL/029 4- Charge
Sherin M-0144 Rahoof M-099
BS EN 933 - 7:1988
Tests for geometrical properties of aggregates. Determination of shell content. Percentage of shells in coarse aggregates
Doha Laboratory
1- Balance Q/BC/029 2- Test sieve 3- Trays 4- Sieve shaker
Doss M-121 Shakul M-019
BS 812 - 110:1990
Testing aggregates. Methods for determination of aggregate crushing value (ACV)
Doha Laboratory
1- Steel cylinder 2- Tamping rod 3- Balance Q/BL/029 4- Test sieves 5- Oven Q/OV/005 6- Compression machine 7- Cylindrical metal measure 8- Metal tray
Sherin M-0144 Chinthanka M-198
ASTM C 123/C 123M-14
Standard Test Method for Lightweight Particles in Aggregate
Doha Laboratory
1- Balance Q/BL/029 2- Container 3- Skimmer 4- Oven Q/OV/005 5- Sieves 6- Specific Gravity bottle
Doss M-121 Shakul M-019
BS EN 1097-6:2013
Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
Doha Laboratory
1- Oven Q/OV/05 2- Balance Q/BL/29 3- Water bath QIL/WB/01 4- Thermometer Q/TM/180 5- Sieves 6- Tray 7- Timer 8- Wire basket Q/WIR/SG/03 9- Water tank 10- Pycnometer Q/PYC/01 11- Metal mould 12- Tamper 13- Air dryer
Doss M-121 Shakul M-019
Asphalt BS EN 12697-27:2001
Bituminous mixtures. Test methods for hot mix asphalt. Sampling
Field Test 1- Shovel 2- Thermometers QTM-111 3- Scoop
Jayantha M-113 Ajith M-142
Page 14 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Asphalt BSEN 12697-28:2001
Bituminous mixtures. Test methods for hot mix asphalt. Preparation of samples for determining binder content, water content and grading
Doha Laboratory
1- Splitter Q/R/06 2- Tray 3- Balance Q/BL/11 4- Oven Q/OV/014 5- Metal tray
Samantha M-166 Nishanka M-222
ASTM D 3549:2011
Determination of Core Thickness
Doha Laboratory
1- Vernier caliper Q/VC/13 2- Tape
Samantha M-166 Nishanka M-222
BSEN 12697-36:2003
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the thickness of a bituminous pavement
Doha Laboratory
1- Vernier caliper 2- Metal ruler or Tape
Samantha M-166 Nishanka M-222
BS EN 12697-6:2012
Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens
Doha Laboratory
1- Balance Q/BL/011 2- Wire basket 3- Vernier Caliper Q/VC/13
Samantha M 166 Ajith M-142
ASTM D 5/ D 5M-13
Standard Test Method for Penetration of Bituminous Materials
Doha Laboratory
1- Penetration apparatus Q/ASP/PEN/02 2- Container 3- Water bath QIL/WB/01 4- Transfer dish 5- Timing device Q/STP/24
Mario M-118 Samantha M-166
BS EN 12697-29:2002
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the dimensions of a bituminous specimen
Doha Laboratory
1- Caliper gauge Q/VC/13
Samantha M-166 Ajith M-142
ASTM D 36/D 36M-14E1
Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
Doha Laboratory
1- Ring & ball apparatus QIL/BIT/SOFT/01 2- Pouring plate 3- Ball centering guide 4- Thermometer Q/TM/180 5- Steerer 6- Hot plate Q/HPT/04
Mario M-118 Ajith M-142
BSEN 12697-34:2012
Bituminous mixtures. Test methods for hot mix asphalt. Marshall test
Doha Laboratory
1- Compression testing machine Q/MAD/02 2- Water bath QIL/WB/01 3- Thermometer Q/TM/180 4- Oven Q/OV/014 5- Flow gauge Q/OG/33
Samantha M-166 Nishanka M-10222 Ajith M-142
Page 15 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Asphalt BSEN 12697-30:2012
Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation by impact compactor
Doha Laboratory
1- Compactor Q/MCO/AUM/02 2- Moulds 3- Oven Q/OV/014 4- Thermometer Q/TM/111 5- Hot plate 6- Extruder
Samantha M-166 Nishanka M-222
BSEN 12697-8:2012
Bituminous mixtures. Test methods for hot mix asphalt. Determination of void characteristics of bituminous specimens
Doha Laboratory
<Calculaton> Samantha M-166 Nishanka M-222
ASTM D 2995-14
Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors
Doha Laboratory
1- Balance Q/BL/111 2- Geotextile pad
Jayantha M-113 Ajith M-142
ASTM D 2042-15
Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
Doha Laboratory
1- Bitumen crucible 2- Filter pad 3- Filter flask 4- Reagent 5- Vacuum pump
Saamantha M-166 Ajith M-142
ASTM D 113-07
Standard Test Method for Ductility of Bituminous Materials
Doha Laboratory
1- Mould 2- Water bath QIL/WB/01 3- Ductility machine Q/ASP/DUC/01 4- Thermometer Q/TM/180 5- Oven 6- Trimming tools
Jayantha M-113 Ajith M-142
ASTM D 92-12b
Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Doha Laboratory
1- Cleveland open cup QIL/FLASH/01 2- Test flame 3- Heater 4- Thermometer Q/TM/02
Jayantha M-113 Ajith M-142
QCS:2014 Section 6- Part 5; Surface Irregularity (Evenness test)
Field Test 1- Taper rolls 2- Travelling beamTN-3624 3- Fiber tips-pencil
Jayantha M-113 Nishanka M-222
BSEN 12697-1:2012
Bituminous mixtures. Test methods for hot mix asphalt Soluble binder content
Doha Laboratory
1- Centrifuge extractor Q/ASPH/03 2- Oven Q/OV/009 3- Volumetric flask 4- Desiccator 5- Filter ring 6- Sieves
Saamantha M-166 Nishanka M-222
BS EN 12697-13:2000
Bituminous mixtures. Test methods for hot mix asphalt. Temperature measurement
Field Test 1- Thermometer Q/OV/111
Ajith M-142 Nishanka M-222
Page 16 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Asphalt
BSEN 12697-5:2009
Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density
Doha Laboratory
1- Ventilator cabin 2- Spatula 3- Balance Q/BL/011 4- Thermometer Q/TM/180 5- Water bath Q/WB/01 6- Pycnometer 7- Vacuum system Q/PG/25-Q/PG/26 8- Agitator 9- Vacuum desiccator Q/GMM/0111
Saamantha M-166 Nishanka M-222
BS EN 13036-7:2003
Road and airfield surface characteristics. Test methods. Irregularity measurement of pavement courses. The straightedge test
Field Test 1- Straight edge TN-6269 2- Wedge 3- Vernier caliper Q/VC/13
Jayantha M-113 Nishanka M-222
ASTM D 6307-10
Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
Doha Laboratory
1- Ignition Oven Q/IGN/01 2- Balance Q/BL/011 3- Splitter Q/R/06
Samantha M-166 Ajith M-142
Soil BS 1377:1990 Methods of tests for soils for civil engineering purposes: Compaction related tests- Section 3 Determination of Dry Density/Moisture Content/Correction of unit weight
Doha Laboratory
1- Test sieves 2- Balance Q/BL/48 3- Mould Q/M/BS/02 4- Rammer 2.5 kg, 4.5 kg 5- Containers 6- Trays 7- Straight edge 8- Spatula 9- Oven Q/OV/11 10- Desiccator
Safihan M-146 Rahoof M-099
BS 1377-4:1990
Methods of test for soils for civil engineering purposes. Compaction-related tests Section 7: California Bearing Ratio test
Doha Laboratory/Field
1- Soaking tank 2- CBR Machine QIL/CBR/01 3- Moulds BS/CBR/A8 4- Spacer disk 5- Sieves 6- Surcharge weight 7- Swell measurement device 8- Rammer 9- Oven Q/OV/005 10- Balance Q/BL/48
Doss M-121 Shakul M-019
Page 17 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Soil BS 1377-2:1990 Methods for test for soils for civil engineering purposes. In-situ tests – Clause 3 Moisture Content
Doha Laboratory
1- Drying oven S/L: Q-OV-005 2- Balance S/L: Q-BL-029 3- Container 4- Desiccator
Arun Pandiyan M-181 Shibi M-065
ASTM D 1883-14
Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
Doha Laboratory
1- Soaking tank 2- CBR Machine QIL/CBR/01 3- Moulds Q/ASTM/CBR/01,02,03 4- Spacer disk 5- Sieves 6- Surcharge weight 7- Swell measurement device 8- Rammer 9- Oven Q/OV/005 10- Balance Q/BL/48 11- Dial gauge
Doss M-121 Shakul M-019
ASTM D 1196-12
Standard Test Method for Non-repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
Field Test 1- Loading device 2-Hydraulic jack Q/PG/17 3- Load cell 4- Bearing plate 5- Deflection beam 6- Data acquisition system
Mr. Fadi G-04 Mr. Nishfar G-059
BS 1377-9:1990
Methods for test for soils for civil engineering purposes. In-situ tests : Clause 4.1 Plate load test
Field Test 1- Loading device 2-Hydraulic jack Q/PG/17 3- Load cell 4- Bearing plate 5- Deflection beam 6- Data acquisition system
Mr. Fadi G-04 Mr. Nishfar G-059
BS 1377-2 Section 8:1990
Methods of test for soils for civil engineering purposes. Classification tests- Section 8 Particle density Test
Doha Laboratory
1- Electronic balance Q/BL/29 2- Sieves 3- Sample Splitters Q/R/01 4- Drying Oven Q/OV/05 5- Jar, Thermometer & Stopwatch Q/STP/11
Doss M-121 Shakul M-018
Page 18 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Soil BS 1377-9:1990
Methods for test for soils for civil engineering purposes. In-situ tests – Clause 4.3 Field CBR
Field Test 1-.Reaction load like truck 2- Diameter loading plunger 3- Extension rods 4- Jacks , proving ring, dial gauge Q/DG/050 5- Datum frame Q/PVG/4
Mr. Samir G-043 Mr. Nishfar G-059
Concrete BS EN 12350-1:2009
Testing fresh concrete. Sampling
Field Test 1- Sampling tray 2- Scoop 3- Showel
Diluksha M-109 Ruwantha M-125
BS EN 12390-2:2009
Testing fresh concrete. Slump-test
Doha Laboratory
1- Cube & cylinder moulds 2- Tamping bar QIL/CBAR/04 3- Trowel 4- Scoop 5- Rubber mallet Q/RHMR/01 6- Curing tanks
Lahiru M-131 Diluksha M-109
ASTM C 31/C31M-15
Standard Practice for Making and Curing Concrete Test Specimens in the Field
Doha Laboratory
1- Cube & cylinder moulds 2- Tamping bar QIL/CROD/01 3- Trowel 4- Scoop 5- Rubber mallet Q/RHMR/01 6- Curing tanks
Lahiru M-131 Diluksha M-109
BS EN 772-1:2015
Methods of test for masonry units. Determination of compressive strength
Doha Laboratory
1- Compression machine Q/COM/01 2- Balance Q/BL/043 3- Ruler QIL/R/08
Danushka M-102 Naveen M-038
ASTM C 39:2015a
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Doha Laboratory
1- Coring machine 2- Trimming machine 3- Compression machine Q/COM/01 4- Vernier caliper QIL/VC/010 5- Balance Q/BL/043
Chandana M-036 Nihal M-023
BS EN 12504-1:2009
Testing concrete in structures. Cored specimens. Taking, examining and testing in compression
Doha Laboratory
1- Coring Machine 2- Compression machine - Q/COM/01 3- Weighing balance - Q/BL/043
Chandana M-036 Nihal M-023 Dinesh M-48 Chandana M-035
ASTM C 42/C 42M-13
Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
Doha Laboratory
1- Compression Machine -Q/COM/07 2- Flexural frame - Q/FLEX/01 3- Weighing scale - Q/BL/043
Chandana M-036 Nihal M-023
Page 19 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./ METHOD/
ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Concrete ASTM C 78-15a Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
Doha Laboratory
1- Flexural machine - Q/FLEX/01 2- Ruler QIL/R/08
Chandana M-036 Samantha M-130
ASTM C 1064-12
Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
Field Test 1- Thermometer Q/TM/106
Chandana M-036 Samantha M-130
BSEN 12350-2:2009
Testing fresh concrete. Slump-test
Field Test 1- Slump cone QIL/SLU/04 2- Scoop 3- Slump rod QIL/CROD/04 4- Base plate
Diluksha M-109 Ruwantha M-125
BS 6717:2001 Precast, unreinforced concrete paving blocks. Requirements and test methods
Doha Laboratory
1- Compression Machine 2- Vernier Caliper 3- Ruler
Nihal M-023 Isuru M-117
BS 1881-208:1996
Testing concrete. Recommendations for the determination of the initial surface absorption of concrete
Doha Laboratory
1- ISAT apparatus QIL/ISAT/01
Chandana M-036 Nihal M-023
ASTM C 140-15 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
Field Test 1- Steel Scale QIL/R/08 2- Compression M achine Q/COM/01 3- Balance Q/BL/043 4- Flexural Machine
Chandana M-036 Nihal M-023 chandana H. M-035
ASTM C 143/C 143M
Standard Test Method for Slump of Hydraulic-Cement Concrete
Field Test/Lab
1- Slump cone QIL/SLU/03 2- Slump rod QIL/CROD/03 3- Base Plate
Danushka M-102 lahiru M-131
ASTM C 172-14a
Standard Practice for Sampling Freshly Mixed Concrete
Field Test/Lab
1- Base Plate 2- Sieves 3- Shovels 4- Hand scoops 5- Trowels
Diluksha M-109 Ruwantha M-125
ASTM C 183-15 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
Field Test 1-Tube sampler Nihal M-023 Diluksha M-109
ASTM C 187-11 e1
Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
Doha Laboratory
1- Weights and Weighing Devices Q/BL/043 2- Glass Graduates 3- Vicat Apparatus
Chandana M-036 Nihal M-023
Page 20 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Concrete ASTM C 191-13 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
Doha Laboratory
1- Weights and Weighing Devices Q/BL/043 2- Glass Graduates 3- Vicat Apparatus
Chandana M-036 Nihal M-023
ASTM C 349-14 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
Doha Laboratory
1- Compression M achine Q/COM/01 2- Aligning Device
Nihal M-023 Chandana M-036
ASTM C 642-13 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
Doha Laboratory
1- Drying Oven QIL/OV/017 2- Balance Q/BL/028 3- Container 4- Hot Plate
Chandana M-036 Nihal M-023
ASTM C 805-13a
Standard Test Method for Rebound Number of Hardened Concrete
Field Test 1- Rebound Hammer Q/HAM/02
Isuru M-117 Chandana H. M-035
ASTM C 900-15 Standard Test Method for Pullout Strength of Hardened Concrete
Field Test 1- Hi Force Hydraulic Jack with pump & gauge
Arunnath M-157 Ajay M-133
ASTM C 989-14 Standard Specification for Slag Cement for Use in Concrete and Mortars
Doha Laboratory
1- Flow table 2- Balance Q/BL/043 3- Ruler Q/R/08 4- compression machine Q/COM/01 5- Containers 6- Curing tank
Nihal M-023 Chandana M-036
ASTM C 1012/ C 1012M-15
Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
Doha Laboratory
1- Mixer QIL/GMIX/01 2- Cube molds 3- Bar molds 4- Comparator 5- Containers 6- Curing tank
Nihal M-023 Chandana M-036
ASTM C 1240- 15
Standard Specification for Silica Fume Used in Cementitious Mixtures
Doha Laboratory
1- Flow table 2- Balance Q/BL/043 3- Ruler Q/R/08 4- compression machine Q/COM/01 5- Containers
Nihal M-023 Chandana M-036
ASTM C 1611-14
Standard Test Method for Slump Flow of Self-Consolidating Concrete
Doha Laboratory
1- Slump Cone QIL/SLU/04 2- Base plate 3- Strike off bar 4- Ruler Q/R/08
Danushka M-102 Naveen M-038
BS EN 196-1:2005
Methods of testing cement. Determination of strength
Doha Laboratory
1- Mixer QIL/GMIX/01 2- Moulds 3- Jolting apparatus 4- Jig for flexural and compressive strength
Nihal M-023 Diluksha M-109
Page 21 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Concrete BS EN 196-6:2010
Methods of testing cement. Determination of fineness
Doha Laboratory
1- Blaine permeability apparatus QIL/BLN/01 2- Balance Q/BL/028 3- Stop watch Q/STP/017
Nihal M-023 SrIyantha M-210
BS EN 196-3: 2005 + A1:2008
Methods of testing cement. Determination of setting times and soundness
Doha Laboratory
1- Vicat apparatus Nihal M-023 Chandana M-036
BS EN 196-7:2007
Methods of testing cement. Methods of taking and preparing samples of cement
Field Test 1- Tube sampler Nihal M-023 Diluksha M-109
BS EN 450-1:2012
Fly ash for concrete. Definition, specifications and conformity criteria
Doha Laboratory
1- Compression machine Q/COM/01 2- Le Chatlier apparatus QIL/SNA/01 3- Water bath 4- Caliper QIL/VC/10
Nihal M-023 SrIyantha M-210
BS EN 771-1:2011
Specification for masonry units. Clay masonry units(Compressive strength and water absorption)
Doha Laboratory
1- Compression machine Q/COM/01 2- Ruler Q/R/08 3- Weighing scale Q/BL/043 4- Drying Oven QIL/OV/017
Naveen M-038 Chandana M-036
BS EN 771-3:2011
Specification for masonry units. Aggregate concrete masonry units (dense and lightweight aggregates)
Doha Laboratory
1- Compression machine Q/COM/01 2- Ruler Q/R/08 3- Weighing scale Q/BL/043 4- Drying Oven QIL/OV/017
Naveen M-038 Chandana M-036
BS EN 12350-5:2009
Testing fresh concrete. Flow table test
Doha Laboratory
1- Flow table 2- Flow cone 3- Compacting bar 4- Ruler Q/R/08 5- Scoop
Samantha M-130 Ruwantha M-125
BS EN 12504-2:2012
Testing concrete in structures. Non- destructive testing. Determination of rebound number
Doha Laboratory
1- Rebound hammer Q/HAM/02 2- Test anvil
Chandana H. M-036 Danushka M-102
BS EN 13791:2007
Assessment of in-situ compressive strength in structure and precast concrete
Doha Laboratory
Not a test only assessment
Chandana M-036 Nihal M-023
BS 6073-1:1981 Precast concrete masonry units. Specification for precast concrete masonry units
Doha Laboratory
1- Vernier Caliper QIL/VC/010 2- balance Q/BL/043 3- Compression machine Q/COM/01
Chandana H. M-035 Danushka M-102
Page 22 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Concrete BS EN 1340:2003
Concrete kerb units. Requirements and test methods: Appendix C Dimension: Appendix E Water absorption and Appendix F Transverse strength of kerbs
Doha Laboratory
1- Drying Oven 2- Straight edge 3- Feller gauge 4- Flexural frame
Chandana M-036 Sriyantha M-210
BS EN 1339:2003
Concrete paving flags. Requirements and test methods - Appendix E: Transverse strength Appendix F:Water absorption
Doha Laboratory
1- Flexural machine 2- Ruler Q/R/08 3- Oven QIL/OV/017 4- Balance Q/BL/043 5- Curing tank
Chandana H. M-035 Danushka M-102
BS 6073-2:2008 Precast concrete masonry units. Guide for specifying precast concrete masonry units
Doha Laboratory
Specification for requirements only
Chandana H. M-035 Danushka M-102
Steel ASTM A 370-15 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
Doha Laboratory
1- UTM -Q/MET/01 2- Balance 3- Measuring scale 4- Vernier caliper
Arun M-147 Ajay M-134
BS 4449:2005 +A2:2009
Testing of Carbon steel bars for tensile and Rebend test
Doha Laboratory
1- UTM -Q/MET/01 2- Balance 3- Measuring scale 4- Vernier caliper 5- Bending pins
Arun M-147 Ajay M-134
ASTM A 615:2014
Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification
Doha Laboratory
1- UTM-Q/MET/01 2- Balance 3- Measuring scale 4- Vernier caliper 5- Bending pins
Arun M-147 Ajay M-134
NDT ASTM G 62-14 Standard Test Methods for Holiday Detection in Pipeline Coatings
Field Test 1- Elcometer Ajay M-133 Shibi M-065
ASTM D 4541-09 e1
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
Field Test 1- Elcometer 106 Adhesion Tester
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
ASTM D 4945-12
Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
Field Test 1- Pile driving Analyzer
Michael G-05 Manuel M-008
ASTM D 5882-13
Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
Field Test 1- Pile integrity tester Michael G-05 Manuel M-008
ASTM D 6760-14
Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Cross hole Testing
Field Test 1- Cross hole analyzer
Michael G-05 Manuel M-008
Page 23 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
NDT
ASTM D 6167-11
Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
Field Test 1- Three arm caliper by Robertson geologging
Michael G-05 Manuel M-008
BS EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas 0 Design requirements, type testing, marking, quality control
Lab Test 1- Manhole Cover Testing Machine (Ele); SN; AA80613 2- Caliper; Asset No. Q/VC/13
Ajay M-133 Arun Nath M-147
BS EN 12504-4:2004
Testing concrete. Determination of ultrasonic pulse velocity
Field Test 1- Proceq PL-200 Ajay M-133 Lahiro M-131 Ropero M-027
ASTM D 6132-13 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
Field Test 1- Positector 200 Advance
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
ASME Section V:2007
Magnetic particle inspection Doha Laboratory
1- Pie gauge 2- Electromagnet 3- MPI Ink 4- Permanent Magnet
Arun Nath M-147 Ajay M-133
ASME Section V:2007
Dye penetration test Doha Laboratory
1- Penetrant 2- Developer 3- Cleaner
Arun Nath M-147 Ajay M-133
ASTM E-18 Standard Test Methods for Rockwell Hardness of Metallic Materials
Doha Laboratory
1- Hardness test machine -Equotip -3 2- Probe with cable 3- Block
Arun Nath M-147 Ajay M-133
ASTM E-10:2003 Brinell hardness test Doha Laboratory
1- Hardness test machine -Equotip -3 2- Probe with cable 3- Block
Arun Nath M-147 Ajay M-133
ASME Section V:2007
Ultrasonic test -Welding Doha Laboratory
1- Ultrasonic flow detector 2- Calibration block 3- Probes
Arun Nath M-147 Ajay M-133
Microscope manual
Crack width measurement using microscope
Field Test 1. Microscope (QIL-CRK-02)
1. Ajay Mohandas - M-133 2. Vineesh - M-243
BS 1881 Part 204:1988
Testing concrete. Recommendations on the use of electromagnetic covermeters
Doha laboratory
1. Cover meter (V/02) 1. Marlon Camero- C-03 2. Shajahan Kasim - C-13
NT BUILD 492:1999
Chloride migration test Doha laboratory
"1. DC Power supply (QIL/CMT/04-04, /05, /06, /07, /08, /09) 2. Caliper (1483) 3. Multimeter (QIL-DMM-01) 4. Thermometer (QIL-TM-101)"
1. Marlon Camero- C-03 2. Shajahan Kasim - C-13
Page 24 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ Doha
Laboratory FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
NDT
ASTM D 7012-14 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperature
Doha Laboratory
1- Compression machine 2- Oven
Mr. Sukhvinder G-081 Nishfar G-059
BS 5930:1999 + A2:2010
(Code of Practice for Site Investigation)Packer Test CL 25
Field Test 1- Packer Equipment (Single or Double) 2- Pressure pump with pressure gauge 3- Stop watch 4- Drilling Equipment 5- Dip meter 6- Measuring Tape
Mr. Ubaid G-026 Mr. Sameer G-043
Geotechnical BS 5930:1999+ A2:2010
Code of Practice for Site Investigation (Geotech Sampling & Description)
Field Test 1- Drilling Rig Mr. Fadi G-04 Mr. Ubaid G-026
ASTM D 5731:2008
Determination of point load strength index of rock
Doha Laboratory
1- Point load apparatus 2- Digital Pressure Gauge (Model LEO 2 Mono200) 3- Stop watch
Mr. Fadi G-04 Mr. Nishfar G-059
ASTM G 57:2012 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
Field Test 1- Digital Earth Tester (DET5/4D) 2- Electrodes 3- Measuring Tape
Mr. Sukhvinder G-081 Mr.Anujan G-064
ASTM D 4543-08 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
Doha Laboratory
1- V blocks 2- Displacement Gage assembly 3- Dial or electronic displacement gage 4- Feeler gage 5- Surface grinder
Mr. Faddi G-04 Mr. Sukhvinder G-081
BS 5930:1999 + A2:2010
(Code of Practice for Site Investigation) Clause 27: Pumping Test
Field Test 1- Drilling Equipment 2- Stop watch 3- Dip meter 4- Measuring tape
Mr. UbaidG-026 Mr. Sameer G-043
BS 5930:1999 + A2:2010
(Code of Practice for Site Investigation) Permeability Test Clause 25: Constant Head+ Falling Head
Field Test 1- Drilling Equipment 2- Stop watch 3- Balance 4- Steel ruler 5- Caliper
Mr. Ubaid G-026 Mr. Sameer G-043 Mr. Anujan G-064
BS 1377-5 :1990 Methods of test for soils for civil engineering purposes. Compressibility, permeability and durability tests - Clause 5: Determination of permeability by the constant-head method
Doha Laboratory
1- Permeameter 2- Stop watch 3- Dip meter 4- Measuring tape 5- Flow meter
Doss M-121 Shibi M-065
Page 25 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Geotechnical
ASTM D 5607-08 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
Doha Laboratory
1- Shear box apparatus 2- Outer Container 3- Two porous plates 4- Two perforated spacer plates 5- Loading cap 6- Load Cell/ Force measuring device\ 7- Dial gauges/ Displacement sensors 8- Vernier 9- Stop watch 10- Balance
Mr. Doss M-121 Mr. Shakul M-019
BS 1377-7:1990 Methods of test for soils for civil engineering purposes. Shear strength tests (total stress) -Clause 4: Determination of shear strength by direct shear (small shear box apparatus)
Doha Laboratory
1- Shear box apparatus 2- Outer Container 3- Two porous plates 4- Two perforated spacer plates 5- Loading cap 6- Load Cell/ Force measuring device 7- Dial gauges/ Displacement sensors 8- Vernier 9- Stop watch 10- Balance
Mr. Doss M-121 Mr. Shakul M-019
BS 5930:1999+A2:2010
Section 4 Cl 25.7:Pressuremeter Test
Field Test 1- Elastmeter 2.0 2- Probe with calibration ring 3- Packer rubber tube
Mr. Ubaid G-026 Mr. Sameer G-043
BS 1377-9:1990 Methods for test for soils for civil engineering purposes. In-situ tests – Clause 3.3 Standard penetration test (SPT)
Field Test 1- SPT Hammer 2- SPT Sampler 3- Rod 4- Measuring tape
Mr. Ubaid G-026 Mr. Anujan G-064
Chemical ASTM D 5334-14
Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
Doha Laboratory
1- kd2 Thermal properties analyzer thermal grease
Mr. Ubaid G-026 Mr. Sameer G-043
Chemical SMEWW 4500 H+ B
pH in water Doha Laboratory
1- pH Meter 2- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 4500-Cl G
Chlorine Residual Doha Laboratory
1- Spectrophotometer 2- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 4500-SO42 C
Sulphate Doha Laboratory
1- Laboratory Furnace/Oven 2- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
Page 26 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Chemical SMEWW 4500-P C
Phosphorus Doha Laboratory
1- Spectrophotometer 2- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 2540 C Total Dissolved Solids /Total volatile dissolved solid
Doha Laboratory
1- Laboratory Furnace/Oven 2- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 2540 D Total Suspended Solids/Total volatile suspended solid
Doha Laboratory
1- Laboratory Furnace/Oven 2- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 2540 B Total Solids Doha Laboratory
1- Laboratory Furnace/Oven 2- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 2540 F Settleable Solids Doha Laboratory
1- Glasswares Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 2130 B Turbidity Doha Laboratory
1- Turbidimeter 2- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 2320 B Alkalinity Doha Laboratory
1- Glasswares Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 5210 D Biological Oxygen Demand Doha Laboratory
1- BOD Respirometer 2- Glasswares 3- BOD Incubator
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 9223 B Fecal Coliforms Doha Laboratory
1- Glasswares 2- Incubator
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 1377-3:1990 Methods of test for soils for civil engineering purposes. Chemical and electro-chemical tests – Clause 7.2: Water Soluble Chloride content in soil
Doha Laboratory
1- Glasswares 2- Balance
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 1377-3:1990 Methods of test for soils for civil engineering purposes. Chemical and electro-chemical tests –Clause 5.3 Water Soluble Sulphate content in soil
Doha Laboratory
1- Glasswares 2- Balance 3- Laboratory Hotplate 4- Laboratory Furnace
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS EN 1744-1:2009 +A1:2012
Tests for chemical properties of aggregates. Chemical analysis - Clause 12: Acid soluble Sulphate Content
Doha Laboratory
1- Glasswares 2- Balance 3- Laboratory Hotplate 4- Laboratory Furnace
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
Page 27 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Chemical
BS 812-118:1988 Testing aggregates. Methods for determination of sulphate content - Clause 9: Acid-Sulphate Content
Doha Laboratory
1- Glasswares 2- Balance 3- Laboratory Hotplate 4- Laboratory Furnace
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 812-117:2006/1988
Testing aggregates. Method for determination of water-soluble chloride salts Appendix C: Acid soluble Chloride content-Aggregate
Doha Laboratory
1- Glasswares 2- Balance 3- Laboratory Hotplate
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS EN 1744-5:2006
Tests for chemical properties of aggregates. Determination of acid soluble chloride salts -Clause 9: Acid soluble Chloride content-Aggregate
Doha Laboratory
1- Glasswares 2- Balance 3- Laboratory Hotplate
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS EN 1744-1:2009+A12012
Tests for chemical properties of aggregates. Chemical analysis-Clause 7: Water soluble Chloride content-
Doha Laboratory
1- Glasswares 2- Balance
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 812-117:2009+A1:2012
Testing aggregates. Method for determination of water-soluble chloride salts: Clause 9: Water soluble chloride content
Doha Laboratory
1- Glasswares 2- Balance
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BSEN 1744-1:2009+A1:2012
Tests for chemical properties of aggregates. Chemical analysis- Clause 10: Water soluble Sulphate content-
Doha Laboratory
1- Glasswares 2- Balance 3- Laboratory Hotplate 4- Laboratory Furnace
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 1881-124:1988
Testing concrete. Methods for analysis of hardened concrete - Clause 10.3: Sulfate
Doha Laboratory
1- Glasswares 2- Balance 3- Laboratory Hotplate 4- Laboratory Furnace
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 1881-124:1988
Testing concrete. Methods for analysis of hardened concrete Clause 10.2:- Chloride
Doha Laboratory
1- Glasswares 2- Balance 3- Laboratory Hotplate 4- Laboratory Furnace
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 1377 -3 Section 9:1990
pH in soil/groundwater Doha Laboratory
1- pH Meter 2- Balance 3- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 4500-Cl- B:2005
Chloride Doha Laboratory
1- Glasswares Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 2510 B:2005
Conductivity Doha Laboratory
1- Conductivity Meter 2- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
Page 28 of 28 TL-528, Qatar Industrial Laboratories W.LL
CATEGORY STD. NO./
METHOD/ISSUE DATES
TITLE OF STD./METHOD USED AND IT’S
RELEVANT SECTION
LOCATION/ FACILITY
TEST EQUIPMENT/ INSTRUMENTATION USED (NAME/ID NO.)
NAMES OF APPROVED
OPERATORS/ TECHNICIANS
Chemical
BS 1377 -3 Section 8:1990
Total Dissolved Solids Doha Laboratory
1- Laboratory Furnace/Oven 2- Glasswares
Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 6068-2.51:2005
Alkalinity 1- Glasswares Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 2340 C:2005
Total Hardness Doha Laboratory
1- Glasswares Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 3500 Ca B:2005
Calcium Doha Laboratory
1- Glasswares Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 3500 Mg B:2005
Magnesium Doha Laboratory
1- Glasswares Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 5220 D:2005
Chemical Oxygen Demand Doha Laboratory
1- COD Reactor 2- Spectrophotometer 3- Glasswares
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 9223 B:2005
Total Coliforms Doha Laboratory
1- Glasswares 2- Incubator
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
SMEWW 9223 B:2005
E.Coli Doha Laboratory
1- Glasswares 2- Incubator
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 1377 - 3 Section 3:1990
Organic Matter Content in Soil
Doha Laboratory
1- Glasswares 2- Balance
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 1377 - 3 Section 7.3:1990
Acid Soluble Chloride content in soil
Doha Laboratory
1- Glasswares 2- Balance 3- Laboratory Hotplate
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS 1377 - 3 Section 5.2:1990
Acid Soluble Sulphate content in soil
Doha Laboratory
1- Glasswares 2- Balance 3- Laboratory Hotplate 4- Laboratory Furnace
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
ASTM C 40:2011 Organic Impurities in Aggregates
Doha Laboratory
1- Glasswares 2- Balance
Jerry Seludo C-07 Marlon Camero C-03 Jinu Khan C-011 Shajahan Kasim C-13
BS EN 196-2 Cl 5:2013
Cl 5 Chemical analysis of cement- National Annex D (SiO2 ,Al2O3, Fe2o, CaO, MgO, SO3, K2O )
Doha laboratory
1. ED-XRF Equipment
(Q-CHE-XRF-01)
1. Jinu Khan - C-011 2. Marlon Camero- C-03
BS EN 196-2 Cl 4.4.1:2013
Cl 4.4.1 Loss on Ignition Doha laboratory
"1. Furnace (QIL/MUF/01)
2. Analytical Balance
(QIL-BAL-14)"
1. Jinu Khan - C-011 2. Marlon Camero- C-03
Top Related