Metallic materials -- Brinell hardness test -- Part 4: Table of hardness
valuesISO 6506-4:2014 New Published 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness
values
ISO 6507-4:2018 New Published 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Conversion of hardness valuesPNS ISO 18265:2005
(ISO published 2003)
RevisionPublished 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Knoop hardness test -- Part 4: Table of hardness
values
ISO 4545-4:2017 New Finalization 77.040.10 BPS/TC 33 Metal Castings
Steel and iron castings -- Visual examination of surface qualityISO 11971:2008
New Finalization 77.140.80; 77.040.20 BPS/TC 33 Metal Castings
Visual examination of the surface condition of investment castings --
Steel, nickel alloys and cobalt alloys
ISO 19959:2005 New Finalization 77.140.80 BPS/TC 33 Metal Castings
Specification and qualification of welding procedures for production
welding of steel castings
ISO 11970:2016 New Finalization 25.160.10; 77.140.80 BPS/TC 33 Metal Castings
Steel castings -- Magnetic particle inspectionISO 4986:2010
New Preparatory 77.140.80; 77.040.20 BPS/TC 33 Metal Castings
Steel and iron castings -- Radiographic testingISO 4993:2015
New Preparatory 77.140.80; 77.040.20 BPS/TC 33 Metal Castings
Metallic materials -- Tensile testing -- Part 1: Method of test at room
temperature
PNS ISO 6892:2007
(ISO Published 1998)
RevisionDeliberation 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Tensile testing -- Part 2: Method of test at elevated
temperature
ISO 6892-2:2018 New Deliberation 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Tensile testing -- Part 3: Method of test at low
temperature
ISO 6892-3:2015 New Deliberation 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Vickers hardness test -- Part 1: Test method ISO 6507-1:2018 New Preparatory 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Brinell hardness test -- Part 1: Test methodISO 6506-1:2014
New Deliberation 77.040.10 BPS/TC 33 Metal Castings
Metallic and other inorganic coatings -- Vickers and Knoop
microhardness tests
PNS 687:1990
(ISO Published 1980)
RevisionPreparatory 25.220.40 BPS/TC 33 Metal Castings
Metallic materials -- Rockwell hardness test -- Part 1: Test methodISO 6508-1:2016
New Finalization 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Leeb hardness test -- Part 1: Test methodISO 16859-1:2015
New Finalization 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Charpy pendulum impact test -- Part 1: Test
method
ISO 148-1:2016 New Preparatory 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation
and characterization of Charpy V-notch test pieces for indirect
verification of pendulum impact machines
ISO 148-3:2016 New Preparatory 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Charpy V-notch pendulum impact test --
Instrumented test methodISO 14556:2015 New Preparatory 77.040.10 BPS/TC 33 Metal Castings
Investment castings (steel, nickel alloys and cobalt alloys) -- General
technical requirements
ISO 16468:2015 New Preparatory 77.140.80 BPS/TC 33 Metal Castings
Metallic materials -- Instrumented indentation test for hardness and
materials parameters -- Part 1: Test method
PNS ISO 14577-1:2005
(ISO published 2002)
RevisionDeliberation 77.040.10 BPS/TC 33 Metal Castings
Steel castings -- Liquid penetrant inspectionISO 4987:2010
New Preparatory 77.140.80; 77.040.20 BPS/TC 33 Metal Castings
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
BUILDING, CONSTRUCTION, MECHANICAL AND TRASPORTATION PRODUCTS
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Steel castings -- Ultrasonic examination -- Part 1: Steel castings for
general purposes
ISO 4992-1:2006 New Preparatory 77.140.80; 77.040.20 BPS/TC 33 Metal Castings
Steel castings -- Ultrasonic examination -- Part 2: Steel castings for
highly stressed components
ISO 4992-2:2006 New Preparatory 77.140.80; 77.040.20 BPS/TC 33 Metal Castings
Tensile tests for discontinuously reinforced metal matrix composites at
ambient temperatures
ISO/TTA 2:1997 New Preparatory 19.060 BPS/TC 33 Metal Castings
Code of practice for creep/fatigue testing of cracked componentsISO/TTA 5:2007
New Preparatory 19.060 BPS/TC 33 Metal Castings
Metallic materials -- Uniaxial creep testing in tension -- Method of testPNS ISO 204:2005
(ISO published 1997)Revision Preparatory 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Calibration of force-proving instruments used for the
verification of uniaxial testing machines
PNS ISO 376:2005
(ISO published 1999)
RevisionPreparatory 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Knoop hardness test -- Part 1: Test methodISO 4545-1:2017
New Deliberation 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Knoop hardness test -- Part 2: Verification and
calibration of testing machines
ISO 4545-2:2017 New Deliberation 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Knoop hardness test -- Part 3: Calibration of
reference blocks
ISO 4545-3:2017 New Deliberation 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Designation of test specimen axes in relation to
product textureISO 3785:2006 New Preparatory 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -
- Part 1: General principles, test method and reporting requirementsISO 12110-1:2013 New Preparatory 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -
- Part 2: Cycle counting and related data reduction methods
ISO 12110-2:2013 New Preparatory 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Fatigue testing -- Strain-controlled
thermomechanical fatigue testing method
ISO 12111:2011 New Preparatory 77.040.10 BPS/TC 33 Metal Castings
Metallic materials -- Fatigue testing -- Axial force-controlled methodPNS ISO 1099:2016
(ISO published 2006)Revision Preparatory 77.040.10 BPS/TC 33 Metal Castings
Geometrical product specifications (GPS) -- Dimensional and
geometrical tolerances for moulded parts -- Part 1: Vocabulary
ISO 8062-1:2007 New Deliberation 17.040.10 BPS/TC 33 Metal Castings
Geometrical product specifications (GPS) -- Dimensional and
geometrical tolerances for moulded parts -- Part 2: Rules
ISO/TS 8062-2:2013 New Deliberation 17.040.10 BPS/TC 33 Metal Castings
Geometrical product specifications (GPS) -- Dimensional and
geometrical tolerances for moulded parts -- Part 3: General dimensional
and geometrical tolerances and machining allowances for castings
ISO 8062-3:2007 New Deliberation 17.040.10 BPS/TC 33 Metal Castings
Brake fluid DOT 4 New Preparatory 43.040.40; 75.120 BPS/TC 44 Road Vehicles
Headlamps (including R2 and/or HS1 lamps) UNECE R 1 New Preparatory 43.180 BPS/TC 44 Road Vehicles
Sealed Beam headlamps UNECE R 5 New Preparatory 43.180 BPS/TC 44 Road Vehicles
Safety-belt anchorages UNECE R 14 New Finalization 43.040.80 BPS/TC 44 Road Vehicles
Safety-belts UNECE R 16 New Finalization 43.040.80 BPS/TC 44 Road Vehicles
Codification of Standards in a motor vehicle DPNS xxxx:20XX New Preparatory 43.040.01 BPS/TC 44 Road Vehicles
Accessibility on Public Utility vehicles DPNS xxxx:20XX New Drafting Stage 43.040.01;13.180; 11.180.01 BPS/TC 44 Road Vehicles
PUV Class 4 Dimensions DPNS xxxx:20XX New Preparatory 43.040.01 BPS/TC 44 Road Vehicles
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel
cylinders using a petroleum base hydraulic brake fluid (service
temperature 120 degrees C max.)
PNS ISO 7633:2013
(ISO Published 1985)
ReconfirmationPreparatory 43.040.40; 83.140.50 BPS/TC 44 Road Vehicles
Road vehicles -- Hydraulic braking systems -- Simple flare pipes, tapped
holes, male fittings and hose end fittings
PNS ISO 4038:2013
(ISO Published 1996)
ReconfirmationPreparatory 43.040.40; 83.140.40 BPS/TC 44 Road Vehicles
Road vehicles -- Brake hose assemblies for hydraulic braking systems
used with petroleum-base brake fluid
PNS ISO 6120:2013
(ISO Published 1995)
ReconfirmationPreparatory 43.040.40; 83.140.40 BPS/TC 44 Road Vehicles
Road vehicles -- Thermoplastics tubing for air braking systemsPNS ISO 7628:2013
(ISO Published 2010)
ReconfirmationPreparatory 43.040.40; 83.140.30 BPS/TC 44 Road Vehicles
Road vehicles -- Elastomeric O-rings for hydraulic drum brake wheel
cylinders using a petroleum base hydraulic brake fluid (service
temperature 120 degrees C max.)
PNS ISO 7630:2013
(ISO Published 1985)
ReconfirmationPreparatory 43.040.40; 83.140.50 BPS/TC 44 Road Vehicles
Road vehicles -- Pneumatic braking connections between motor
vehicles and towed vehicles -- Interchangeability
PNS ISO 1728:2013
(ISO Published 2006)
ReconfirmationPreparatory 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Pressure test connection for compressed-air pneumatic
braking equipment
PNS ISO 3583:2013
(ISO Published 1984)
ReconfirmationPreparatory 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Hydraulic pressure test connection for braking
equipment
PNS ISO 3803:2013
(ISO Published 1984)
ReconfirmationPreparatory 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Labelling of containers for petroleum-based or non-
petroleum-based brake fluid
PNS ISO 3871:2013
(ISO Published 2000)
ReconfirmationPreparatory 43.040.40; 75.120 BPS/TC 44 Road Vehicles
Road vehicles -- Brake hose assemblies for hydraulic braking systems
used with non-petroleum-base brake fluid
PNS ISO 3996:2013
(ISO Published 1995)
ReconfirmationPreparatory 43.040.40; 83.140.40 BPS/TC 44 Road Vehicles
Road vehicles -- Pneumatic braking systems -- Part 1: Pipes, male
fittings and tapped holes with facial sealing surface
PNS ISO 4039-1:2013
(ISO Published 1998)
ReconfirmationPreparatory 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Pneumatic braking systems -- Part 2: Pipes, male
fittings and holes with conical sealing surface
PNS ISO 4039-2:2013
(ISO Published 1998)
ReconfirmationPreparatory 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Specification of non-petroleum-base brake fluids for
hydraulic systems
PNS ISO 4925:2013
(ISO Published 2005)
ReconfirmationPreparatory 75.120; 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Hydraulic braking systems -- Non-petroleum-base
reference fluids
PNS ISO 4926:2013
(ISO Published 2006)
ReconfirmationPreparatory 75.120; 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Filter elements for full flow oil filters -- Dimensions
PNS ISO 7747:2005
(ISO Published 1983)
ReconfirmationCirculation 43.060.30 BPS/TC 44 Road Vehicles
Road vehicles -- Spin-on fuel filters for diesel engines -- Mounting and
connecting dimensions
PNS ISO 7654:2005
(ISO Published 1998)
ReconfirmationCirculation 43.060.40 BPS/TC 44 Road Vehicles
Diesel engines -- Heads for fuel filters with vertical flange -- Mounting
and connecting dimensionsPNS ISO 7311:2005
(ISO Published 1993)
ReconfirmationCirculation 43.060.40 BPS/TC 44 Road Vehicles
Diesel engines -- Heads for spin-on fuel filters with horizontal flange --
Mounting and connecting dimensionsPNS ISO 7310:2005
(ISO Published 1993)
ReconfirmationCirculation 43.060.40 BPS/TC 44 Road Vehicles
Road vehicles -- Brake linings frictions materials -- Visual inspectionPNS ISO/PAS 22574:2013
(ISO/PAS Published 2007)
Reconfirmation Circulation 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Brake lining friction materials -- Product definition and
quality assurance
PNS ISO 15484:2013
(ISO Published 2008)
ReconfirmationCirculation 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Fuse-links -- Part 1: Definitions and general test
requirementsISO 8820-1:2014 New Preparatory 43.040.10 BPS/TC 44 Road Vehicles
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Road vehicles -- Fuse-links -- Part 2: User guidelines ISO 8820-2:2014 New Preparatory 43.040.10 BPS/TC 44 Road Vehicles
Road vehicles -- Fuse-links -- Part 3: Fuse-links with tabs (blade type)
Type C (medium), Type E (high current) and Type F (miniature)ISO 8820-3:2015 New Preparatory 43.040.10 BPS/TC 44 Road Vehicles
Road vehicles -- Fuse-links -- Part 4: Fuse-links with female contacts
(type A) and bolt-in contacts (type B) and their test fixturesISO 8820-4:2016 New Preparatory 43.040.10 BPS/TC 44 Road Vehicles
Road vehicles -- Fuse-links -- Part 5: Fuse-links with axial terminals
(Strip fuse-links) Types SF 30 and SF 51 and test fixturesISO 8820-5:2015 New Preparatory 43.040.10 BPS/TC 44 Road Vehicles
Road vehicles -- Fuse-links -- Part 6: Single-bolt fuse-links ISO 8820-6:2019 New Preparatory 43.040.10 BPS/TC 44 Road Vehicles
Road vehicles -- Fuse-links -- Part 8: Fuse-links with bolt-in contacts
(Type H and J) with rated voltage of 450 VISO 8820-8:2012 New Preparatory 43.040.10 BPS/TC 44 Road Vehicles
Road vehicles -- Fuse-links -- Part 9: Fuse-links with shortened tabs
(Type K)ISO 8820-9:2014 New Preparatory 43.040.10 BPS/TC 44 Road Vehicles
Road vehicles -- Fuse-links -- Part 10: Fuse-links with tabs Type L (high
current miniature)ISO 8820-10:2015 New Preparatory 43.040.10 BPS/TC 44 Road Vehicles
Road vehicles -- Hydraulic jacks -- SpecificationsPNS 1465:1996
(ISO 11530:1993)
ReconfirmationCirculation 43.180 BPS/TC 44 Road Vehicles
Road vehicles -- Motor vehicles -- Flasher unitsPNS ISO 4082:2005
(ISO Published 1981)
ReconfirmationCirculation 43.040.20 BPS/TC 44 Road Vehicles
Road vehicles -- Special warning lamps -- DimensionsPNS ISO 4148:2005
(ISO Published 2004)
ReconfirmationCirculation 43.040.20 BPS/TC 44 Road Vehicles
Road vehicles -- Electrical/electronic switching devices -- Part 1: Relays
and flashersISO 7588-1:1998 New Preparatory 43.040.20 BPS/TC 44 Road Vehicles
Road vehicles -- Electrical/electronic switching devices -- Part 2:
Electronic devicesISO 7588-2:1998 New Preparatory 43.040.20 BPS/TC 44 Road Vehicles
Road vehicles -- Retro-reflective registration plates for motor vehicles
and trailers -- SpecificationPNS ISO 7591:2005
(ISO Published 1982)
ReconfirmationCirculation 43.040.20 BPS/TC 44 Road Vehicles
Road vehicles -- LED lamp characteristics for bulb compatible failure
detection -- Part 1: LED lamps used as direction indicatorsISO 13207-1:2012 New Preparatory 43.040.20 BPS/TC 44 Road Vehicles
Road vehicles -- Alarm systems for buses and commercial vehicles of
maximum authorized total mass greater than 3,5 tISO 15763:2002 New Preparatory 43.040.20 BPS/TC 44 Road Vehicles
Passenger cars -- Wiper systems -- Wiper blade length ISO 9258:1989 New Preparatory 43.040.65 BPS/TC 44 Road Vehicles
Passenger cars -- Windscreen wiper systems -- Wiper arm-to-blade
connectionsISO 9259:1991 New Preparatory 43.040.65 BPS/TC 44 Road Vehicles
Road vehicles -- Diaphragm gaskets for hydraulic brake master cylinder
reservoirs using a non-petroleum base hydraulic brake fluidPNS ISO 4929:2013
(ISO Published 1978)
ReconfirmationCirculation 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders
using a non-petroleum base hydraulic brake fluid (Service temperature
150 degrees C max.)
PNS ISO 4930:2013
(ISO Published 2006)
ReconfirmationCirculation 83.140.50; 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic
braking systems using a non-petroleum base hydraulic brake fluid
(service temperature 70 degrees C max.)
PNS ISO 6118:2013
(ISO Published 2006)
ReconfirmationCirculation 83.140.50; 43.040.40 BPS/TC 44 Road Vehicles
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders
using a non-petroleum base hydraulic brake fluid (Service temperature
120 degrees C max.)
PNS ISO 6119:2013
(ISO Published 2006)
ReconfirmationCirculation 83.140.50; 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic
braking systems using a petroleum base hydraulic brake fluid (service
temperature 120 degrees C max.)
PNS ISO 7631:2013
(ISO Published 1985)
ReconfirmationCirculation 83.140.50; 43.040.40 BPS/TC 44 Road Vehicles
Road vehicles - Elastomeric seals for hydraulic disc brake cylinders
using a petroleum base hydraulic brake fluid (service temperature 120
degrees C max.)
PNS ISO 7632:2013
(ISO Published 1985)
ReconfirmationCirculation 83.140.50; 43.040.40 BPS/TC 44 Road Vehicles
Protective gloves against dangerous chemicals and micro-organisms –
Part 1: Terminology and performance requirements for chemical risksISO 374-1:2016 with Amendment 1:2018 New Finalization
01.040.13;
13.340.40
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective gloves against dangerous chemicals and micro-organisms –
Part 5: Terminology and performance requirements for micro-organisms
risks
ISO 374-5:2016 New Finalization01.040.13;
13.340.40
BPS/TC 56 Personal safety - Personal Protective
Equipment
Clothing for protection against heat and flame – General
recommendations for selection, care and use of protective clothingISO/TR 2801:2007 New Finalization 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing against heat and flame – Determination of heat
transmission on exposure to flame
PNS ISO 9151:2015
(ISO Published 1995)Revision Finalization 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing – Vocabulary ISO/TR 11610:2004 New Finalization01.040.13 ;
13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Clothing for protection against heat and flame – Determination of contact
heat transmission through protective clothing or constituent materials –
Part 1: Contact heat produced by heating cylinder
PNS ISO 12127-1:2015
(ISO Published 2007)Revision Finalization 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing against heat and flame -- Test method for complete
garments -- Prediction of burn injury using an instrumented manikin
PNS ISO 13506:2015
(ISO Published 2008)Revision Finalization 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing – Protection against flame – Method of test for
limited flame spread
PNS ISO 15025:2015
(ISO Published 2000)Revision Deliberation 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing – Test methods for clothing providing protection
against chemicals – Part 4: Determination of resistance to penetration
by a spray of liquid (spray test)
PNS ISO 17491-4:2015
(ISO Published 2008)Revision (Amendment) Deliberation 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Clothing and equipment for protection against heat – Test method for
convective heat resistance using a hot air circulating oven
PNS ISO 17493:2015
(ISO Published 2000)Revision Finalization 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing – Protection against chemicals – Measurement of
cumulative permeation of chemicals with low vapour pressure through
materials
ISO 19918:2017 New Finalization 13.340.10 BPS/TC 56 Personal safety - Personal Protective
Equipment
High visibility clothing – Test methods and requirementsPNS ISO 20471:2015
(ISO Published 2013)Revision (Amendment) Finalization 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing for users of hand-held chain-saws – Part 1: Test rig
driven by a flywheel for testing resistance to cutting by a chain-saw
PNS ISO 11393-1:2015
(ISO Published 1998)Revision Drafting/Deliberation 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing for users of hand-held chain-saws – Part 2: Test
methods and performance requirements for leg protectors
PNS ISO 11393-2:2015
(ISO Published 1999)Revision Drafting/Deliberation 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Protective clothing for users of hand-held chain-saws – Part 3: Test
methods for footwear
PNS ISO 11393-3:2015
(ISO Published 1999)Revision Drafting/Deliberation 13.340.50
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing for users of hand-held chain-saws – Part 4: Test
methods and performance requirements for protective gloves
PNS ISO 11393-4:2015
(ISO Published 2003)Revision Drafting/Deliberation 13.340.40
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing for users of hand-held chain-saws – Part 5: Test
methods and performance requirements for protective gaiters
PNS ISO 11393-5:2015
(ISO Published 2001)Revision Drafting/Deliberation 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing for users of hand-held chain-saws – Part 6: Test
methods and performance requirements for upper body protectors
PNS ISO 11393-6:2015
(ISO Published 2007)Revision Drafting/Deliberation 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Surgical drapes, gowns and clean air suits, used as medical devices, for
patients, clinical staff and equipment – Test method to determine the
resistance to wet bacterial penetration
PNS ISO 22610:2015
(ISO Published 2006)Revision Drafting/Deliberation 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective gloves against mechanical risks ISO 23388:2018 New Drafting/Deliberation 13.340.40 BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing – Performance requirements for protective clothing
worn by operators applying pesticides and for re-entry workers
PNS ISO 27065:2015
(ISO Published 2011)Revision Organization Meeting 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing for firefighter's who are engaged in support activities
associated with structural fire fighting – Laboratory test methods and
performance
PNS ISO 11613:2016
(ISO Published 1999)Revision Organization Meeting 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing for firefighters – Laboratory test methods and
performance requirements for wildland firefighting clothing
PNS ISO 15384:2016
(ISO Published 2003)Revision Organization Meeting 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
PPE ensembles for firefighters undertaking specific rescue activities –
Part 1: GeneralISO 18639-1:2018 New Organization Meeting 13.340.50
BPS/TC 56 Personal safety - Personal Protective
Equipment
PPE ensembles for firefighters undertaking specific rescue activities –
Part 3: ClothingISO 18639-3:2018 New Organization Meeting 13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
PPE ensembles for firefighters undertaking specific rescue activities –
Part 3: GlovesISO 18639-4:2018 New Organization Meeting 13.340.40
BPS/TC 56 Personal safety - Personal Protective
Equipment
PPE ensembles for firefighters undertaking specific rescue activities –
Part 3: HelmetISO 18639-5:2018 New Organization Meeting 13.340.20
BPS/TC 56 Personal safety - Personal Protective
Equipment
PPE ensembles for firefighters undertaking specific rescue activities –
Part 6: FootweaISO 18639-6:2018 New Organization Meeting 13.340.50
BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing for firefighters – Physiological impact – Part 1:
Measurement of coupled heat and moisture transfer with the sweating
torso
ISO 18640-1:2018 New Organization Meeting 13.340.10BPS/TC 56 Personal safety - Personal Protective
Equipment
Protective clothing for firefighters – Physiological impact – Part 2:
Determination of physiological heat load caused by protective clothing
worn by firefighters
ISO 18640-2:2018 New Organization Meeting 13.340.10 BPS/TC 56 Personal safety - Personal Protective
Equipment
Personal protective equipment for firefighters – Standard terms and
definitionsISO/TR 19591:2018 New Organization Meeting
01.040.13;
13.340.10
BPS/TC 56 Personal safety - Personal Protective
Equipment
Respiratory protective devices – Methods of test and test equipment –
Part 2: Determination of breathing resistance
PNS ISO 16900-2:2011
(ISO published 2009)Revision Organization Meeting 13.340.30
BPS/TC 56 Personal safety - Personal Protective
Equipment
Respiratory protective devices – Human factors – Part 1: Metabolic rates
and respiratory flow rates
PNS ISO/TS 16976-1:2011
(ISO published 2007)Revision Organization Meeting 13.340.30
BPS/TC 56 Personal safety - Personal Protective
Equipment
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Respiratory protective devices – Human factors – Part 2:
Anthropometrics
PNS ISO/TS 16976-2:2011
(ISO published 2010)Revision Organization Meeting 13.340.30
BPS/TC 56 Personal safety - Personal Protective
Equipment
Respiratory protective devices – Human factors – Part 3: Physiological
responses and limitations of oxygen and limitations of carbon dioxide in
the breathing environment
PNS ISO/TS 16976-3:2011
(ISO published 2011)Revision Organization Meeting 13.340.30
BPS/TC 56 Personal safety - Personal Protective
Equipment
Safety of machinery - Basic concepts, general principles for design -
Part 1: Basic terminology, methodology
PNS ISO 12100-1:2005
(ISO published 2003)
Safety of machinery - Basic concepts, general principles for design -
Part 2: Technical Principles
PNS ISO 12100-2:2005
(ISO published 2003)
Safety of machinery - Safety-related parts of control systems - Part 1:
General principles for design
PNS ISO 13849-1:2005
(ISO published 1999)Revision Finalization 13.110 Safety of machinery (ISO/TC 199 Safety of machinery)
Safety of machinery - Safety-related parts of control systems - Part 2:
Validation
PNS ISO 13849-2:2005
(ISO published 2003)Revision Finalization 13.110 Safety of machinery (ISO/TC 199 Safety of machinery)
Safety of machinery - Emergency stop - Principles for designPNS ISO 13850:2005
(ISO published 1996)Revision Finalization 13.110 Safety of machinery (ISO/TC 199 Safety of machinery)
Safety of machinery - Two-hand control devices - Functional aspects
and design principles
PNS ISO 13851:2005
(ISO published 2002)Revision Finalization 13.110 Safety of machinery (ISO/TC 199 Safety of machinery)
Safety of machinery - Safety distances to prevent danger zones being
reached by the upper limbs
PNS ISO 13852:2005
(ISO published 1996)
Safety of machinery - Safety distances to prevent danger zones being
reached by the lower limbs
PNS ISO 13853:2005
(ISO published 1998)
Safety of machinery - Minimum gaps to avoid crushing of parts of the
human body
PNS ISO 13854:2005
(ISO published 1996)Revision Finalization 13.110 Safety of machinery (ISO/TC 199 Safety of machinery)
Safety of machinery - Guards - General requirements for the design and
construction of fixed and movable guards
PNS ISO 14120:2005
(ISO published 2002)Revision Finalization 13.110 Safety of machinery (ISO/TC 199 Safety of machinery)
Cylidrical shank twist drills - Long series ISO 494:2017 New Circulation ICS 25.100.30(ISO/TC 29/SC 9 Tools with defined cutting edges,
holding tools, cutting items, adaptive items and interfaces)
Spot drills ISO 10898:2016 New Circulation ICS 25.100.30(ISO/TC 29/SC 9 Tools with defined cutting edges,
holding tools, cutting items, adaptive items and interfaces)
Pliers and nippers - General technical requirementsISO 5743:2004 New Circulation ICS 25.140.30
(ISO/TC 29/SC 10 Assembly tools for screws and nuts,
pliers and nippers)
Woodworking tools - Chisels and gougesISO 2729:1995
New Circulation ICS 79.120.20 (ISO/TC 29 Small tools)
Spanners and wrenches - Spline drive ends for power socket wrenchesISO 4228:1986 New Circulation ICS 25.140.01
(ISO/TC 29/SC 10 Assembly tools for screws and nuts,
pliers and nippers)
Assembly tools for screws and nuts - Technical specifications - Part 1:
Hand-operated wrenches and sockets ISO 1711-1:2016 New CirculationICS 25.140.01 (ISO/TC 29/SC 10 Assembly tools for screws and nuts,
pliers and nippers)
Pliers and nippers for electronics -- Single-purpose nippers -- Cutting
nippersISO 9654:2004 New Circulation ICS 25.140.30
(ISO/TC 29/SC 10 Assembly tools for screws and nuts,
pliers and nippers)
Assembly tools for screws and nuts - Screwdrivers for cross-recessed
head screws - Part 1: Driver tips ISO 8764-1:2004 New Circulation
ICS 25.140.23
(ISO/TC 29/SC 10 Assembly tools for screws and nuts,
pliers and nippers)
(ISO/TC 199 Safety of machinery)
Revision Finalization 13.110 Safety of machinery (ISO/TC 199 Safety of machinery)
Revision Finalization 13.110 Safety of machinery
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Bamboo structures – Grading of bamboo culms – Basic principles and
proceduresISO 19624:2018 New Circulation 91.080.20 BPS/TC 76 Bamboo and Rattan
Bamboo - Determination of physical and mechanical properties - Part 1:
Requirements
Bamboo - Determination of physical and mechanical properties - Part 2:
Laboratory manual
PNS ISO 22157-1:2010
(ISO published 2004)
PNS ISO/TR 22157 2:2010
(ISO published 2004)
Revision Circulation 79.04 BPS/TC 76 Bamboo and Rattan
Rattan poles and rattan by-products - Specification PNS 229:1999 Revision Preparatory 79.040 BPS/TC 76 Bamboo and Rattan
Dimensions and tolerances of sawn timber (lumber) PNS 173:1992 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products
Sawn Timber - Determination of the Average Moisture Content of a Lot PNS 1007:1989 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products
Standard Specification for Adhesives for Field Gluing Plywood to
Lumber Framing for Floor SystemsPNS ASTM D3498:2008 Revision Preparatory 75.080 BPS/TC 22 Lumber and Timber Products
Standard Test Method for Resistance to Deformation Under Static
Loading for Structural Wood Laminating Adhesives Used Under Exterior
(Wet Use) Exposure Conditions
PNS ASTM D3535:2008 Revision Preparatory 83.180 BPS/TC 22 Lumber and Timber Products
Coniferous sawn timber – Defects – Terms and definitions PNS ISO 1031:2010 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products
Coniferous sawlogs – Measurement of sizes and determination of
volume (ISO 4480:1983)PNS 1899:1999 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products
Coniferous and broadleaved tree sawlogs – Visible defects – Terms and
definitionsPNS ISO 4474:2010 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products
Coniferous broadleaved sawlogs – Sizes – Vocabulary PNS ISO 4476:2010 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products
Structural timber - Visual strength grading – Basic principles PNS ISO 9709:2009 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products
Structural timber - Machine strength grading -Basic principles PNS ISO 13912:2009 Revision Preparatory 79.040 BPS/TC 22 Lumber and Timber Products
Timber structures - Joints made with mechanical fasteners -- General
principles for the determination of strength and deformation
characteristics
PNS ISO 6891:2009 Reissue Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Timber structures -- Glued laminated timber -- Test methods for
determination of physical and mechanical propertiesISO 8375:2017 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Logging Industry - Technology - Term and Definitions ISO 8965:2013 New Preparatory79.020
01.040.79BPS/TC 22 Lumber and Timber Products
Timber structures -- Testing of punched metal plate fasteners and joints ISO 8969:2011 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Timber structures -- Testing of joints made with mechanical fasteners --
Requirements for wood densityISO 8970:2010 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Wood - Determination of nail and screw holding power under axial load
applicationISO 9087:1998 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Timber -- Finger joints -- Minimum production requirements and testing
methodsISO 10983:2014 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Timber structures -- Dowel-type fasteners -- Part 1: Determination of
yield momentISO 10984-1:2009 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Timber structures -- Dowel-type fasteners -- Part 2: Determination of
embedding strengthISO 10984-2:2009 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Timber structures -- Strength graded timber -- Test methods for
structural propertiesISO 13910:2014 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Timber poles -- Basic requirements and test methods ISO 15206:2010 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Timber structures -- Structural classification for sawn timber ISO 16598:2015 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Timber structures -- Joints made with mechanical fasteners -- Quasi-
static reversed-cyclic test methodISO 16670:2003 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Timber structures -- Test methods -- Torsional resistance of driving in
screwsISO 17754:2014 New Preparatory 91.080.20 BPS/TC 22 Lumber and Timber Products
Standard Specification for Loadbearing Concrete Masonry Units ASTM C90:2018 New Circulation 91.100.30BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Specification for Nonloadbearing Concrete Masonry Units ASTM C129:2019 New Circulation 91.100.30BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Methods for Sampling and Testing Concrete Masonry
Units and Related UnitsASTM C140/C140M:2019 New Circulation 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Organic Impurities in Fine Aggregates for
ConcretePNS ASTM C40/C40M:2013 Revision Circulation 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Practice for Sampling Aggregates PNS ASTM D75:2013 Revision Circulation 91.100.30BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Specification for Reinforced Concrete Culvert, Storm Drain,
and Sewer Pipe (Metric)PNS 58:1986 Revision Preparatory
91.100.30
23.040.50
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Flexural Strength of Concrete (Using Simple
Beam with Third-Point Loading)ASTM C78 / C78M - 18 New Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Flexural Strength of Concrete (Using Simple
Beam with Center-Point Loading)ASTM C293/C293M-16 New Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates PNS ASTM C136:2013 Revision Circulation 91.100.30BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Air Content of Freshly Mixed Concrete by the
Volumetric MethodASTM C173 / C173M - 16 New Circulation 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Measuring Thickness of Concrete Elements
Using Drilled Concrete CoresASTM C174 / C174M - 17 New Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Air Content of Freshly Mixed Concrete by the
Pressure MethodASTM C231 / C231M - 17a New Circulation 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Descriptive Nomenclature for Constituents of Concrete
AggregatesPNS ASTM C294:2013 Revision Preparatory
01.040.91
91.100,10
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Guide for Petrographic Examination of Aggregates for
ConcretePNS ASTM C295:2013 Revision Organizational Meeting 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Time of Setting of Concrete Mixtures by
Penetration ResistanceASTM C403 / C403M - 16 New Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Effectiveness of Pozzolans or Ground Blast-
Furnace Slag in Preventing Excessive Expansion of Concrete Due to the
Alkali-Silica Reaction
PNS ASTM C441:2013 Revision Preparatory 91.100.30BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks
as Concrete Aggregates (RockCylinder Method) PNS ASTM C586:2013 Revision Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Specification for Chemical Admixtures for Use in Producing
Flowing ConcreteASTM C1017 / C1017M - 13e1 New Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Temperature of Freshly Mixed Hydraulic-
Cement ConcreteASTM C1064 / C1064M - 17 New Preparatory 91.100.10
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Length Change of Concrete Due to Alkali-
Carbonate Rock Reaction PNS ASTM C1105:2013 Revision Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Specification for Fiber-Reinforced Concrete ASTM C1116 / C1116M - 10a(2015) New Circulation 91.100.30BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar
Method) PNS ASTM C1260:2013 Revision Circulation 91.100.10
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Determination of Length Change of Concrete
Due to Alkali-Silica Reaction PNS ASTM C1293:2013 Revision Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Obtaining and Testing Drilled Cores of
ShotcreteASTM C1604 / C1604M - 05(2012) New Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Specification for Thin-bed Mortar for Autoclaved Aerated
Concrete (AAC) MasonryASTM C1660 - 10(2018) New Preparatory 91.100.10
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Specification for Unreinforced Autoclaved Aerated Concrete
(AAC) Masonry UnitsASTM C1691 -11(2017) New Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Practice for Construction and Testing of Autoclaved Aerated
Concrete (AAC) MasonryASTM C1692 - 18 New Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Specification for Autoclaved Aerated Concrete (AAC) ASTM C1693 - 11(2017) New Preparatory 91.100.30BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Specification for Materials for Shotcrete ASTM C 1436-13 New Preparatory 91.100.30BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Specification for Slag Cement for Use in Concrete and Mortars ASTM C989/C989M-18a New Preparatory 91.100.30BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Test Method for Sand Equivalent Value of Soils and Fine
AggregateASTM D2419-14 New Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Standard Specification for Reinforced Autoclaved Aerated Concrete
(AAC) ElementsASTM C1694 - 09(2017) New Preparatory 91.100.30
BPS/TC 5 Concrete, Reinforced Concrete and Prestressed
Concrete
Electric vehicle conductive charging system - Part 1: General
requirementsPNS IEC 61851-1:2012 Revision Circulation 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Electric vehicle battery swap system - Part 1: General and guidance IEC TS 62840-1:2016 New Circulation 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Electric vehicle battery swap system - Part 2: Safety requirements IEC 62840-2:2016 New Circulation 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Electric mopeds and motorcycles - Terminology and classification ISO/TR 13062:2015 New Drafting/Deliberation 01.040.43; 43.140 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Electrically propelled mopeds and motorcycles -- Safety specifications ISO 13063:2012 New Drafting/Deliberation 43.140 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Battery-electric mopeds and motorcycles -- Performance -- Part 1:
Reference energy consumption and range
ISO 13064-1:2012 New Drafting/Deliberation 43.140 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Battery-electric mopeds and motorcycles -- Performance -- Part 2: Road
operating characteristicsISO 13064-2:2012 New Drafting/Deliberation 43.140 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Electrically propelled mopeds and motorcycles -- Test specifications and
safety requirements for lithium-ion battery systemsISO 18243:2017 New Drafting/Deliberation 43.140 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Electrically propelled mopeds and motorcycles -- Safety requirements
for conductive connection to an external electric power supplyISO 18246:2015 New Drafting/Deliberation 43.140 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Electrically propelled mopeds and motorcycles -- Test method for
evaluating performance of regenerative braking systemsISO/TS 19466:2017 New Drafting/Deliberation 43.140 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
In-Cable Control and Protection Device for mode 2 charging of electric
road vehicles (IC-CPD)IEC 62752:2016 New Organization Meeting 29.120.50 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Hybrid-electric road vehicles -- Exhaust emissions and fuel consumption
measurements -- Part 1: Non-externally chargeable vehiclesISO 23274-1:2013 New Organization Meeting 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Hybrid-electric road vehicles -- Exhaust emissions and fuel consumption
measurements -- Part 2: Externally chargeable vehiclesISO 23274-2:2012 New Organization Meeting 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Electric vehicle wireless power transfer (WPT) systems - Part 1:
General requirementsIEC 61980-1:2015/COR1:2017 New Organization Meeting 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Electrically propelled road vehicles -- Magnetic field wireless power
transfer -- Safety and interoperability requirementsISO/PAS 19363:2017 New Organization Meeting 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Electric road vehicles - Safety specifications - Part 3: Protection of
persons against electric hazardsPNS ISO 6469-3:2012 Revision Organization Meeting 43.120 BPS/TC 44 Road Vehicles/SC21 Electric Road Vehicles
Test methods for natural fibre-reinforced plastic composite (NFC) deck
boards ISO 16616:2015 New Finalization 83.140.99 BPS/TC 35 Wood-based panels
Veneers - Terms and definitions, determination of physical
characteristics and tolerances ISO 18775:2008 New Finalization 01.040.79; 79.060.01 BPS/TC 35 Wood-based panels
Plywood - Classification by surface appearance - Part 4: Palm-plywood ISO 2426-4:2018 New Finalization 79.060.01 BPS/TC 35 Wood-based panels
Steel bars for concrete reinforcement - Specification DPNS 49:2019 Revision Published 77.140.15; 77.140.60 BPS/TC 11 Long Steel Products
Specification for Carbon Steel Wire Rods PNS 77:1986 Revision Preparatory 669.141 BPS/TC 11 Long Steel Products
Rerolled steel bars for concrete reinforcement - Specification PNS 211:2002 Revision Preparatory 77.140.15 BPS/TC 11 Long Steel Products
Hot-rolled steel section - Equal-leg angles - Specifications PNS 657:2008 Revision Preparatory 669.14; 122.4; 423.2 BPS/TC 11 Long Steel Products
Specification for low carbon steel wires - Plain/annealed/zinc-coated PNS 113:2005 Revision Drafting/Deliberation 77.140.65 BPS/TC 11 Long Steel Products
Societal security - Business continuity management systems - Guidance ISO 22312:2011 New Preparatory 03.100.01 BPS/TC 75 Societal Security
Sustainability in building construction - General principles ISO 15392:2008 Reconfirmation Circulation 91.040.01 (ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Sustainability in buildings and civil engineering works - Guidelines on
the application of the general principles in ISO 15392ISO/TS 12720:2014 New Circulation 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Sustainability in buildings and civil engineering works - Carbon metric of
an existing building during use stage - Part 1: Calculation, reporting and
communication
ISO 16745-1:2017 New Circulation 91.040.01 (ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Sustainability in buildings and civil engineering works - Carbon metric of
an existing building during use stage - Part 2: VerificationISO 16745-2:2017 New Circulation 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Sustainability in building construction - Sustainability indicators - Part 1:
Framework for the development of indicators and a core set of indicators
for buildings
ISO 21929-1:2011 Revision Circulation 91.040.01 (ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Sustainability in building construction - Sustainability indicators - Part 2:
Framework for the development of indicators for civil engineering worksISO 21929-2:2015 New Circulation 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Sustainability in buildings and civil engineering works - Core rules for
environmental product declarations of construction products and
services
ISO 21930:2017 Revision Circulation 91.040.01 (ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Sustainability in buildings and civil engineering works - A review of
terminologyISO/TR 21932:2013 New Circulation 01.040.91; 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Building construction - Accessibility and usability of the built
environmentISO 21542:2011 New Circulation 91.060.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and civil engineering works - Vocabulary - Part 1: General
termsISO 6707-1:2017 Revision Published
01.040.93; 93.010; 01.040.91;
01.010.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and civil engineering works - Vocabulary - Part 2: Contract
and communication termsISO 6707-2:2017 Revision Published 91.010.20; 01.040.91
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and civil engineering works - Vocabulary - Part 3:
Sustainability termsISO 6707-3:2017 New Published 01.040.91; 91.010.20
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and constructed assets -- Service life planning -- Part 1:
General principles and frameworkISO 15686-1:2011 Revision Published 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and constructed assets -- Service life planning -- Part 2:
Service life prediction proceduresISO 15686-2:2012 Revision Published 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and constructed assets -- Service life planning -- Part 3:
Performance audits and reviewsISO 15686-3:2002 Reconfirmation Published 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Building Construction -- Service Life Planning -- Part 4: Service Life
Planning using Building Information ModellingISO 15686-4:2014 Revision Published 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and constructed assets -- Service life planning -- Part 5: Life-
cycle costingISO 15686-5:2017 New Published 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and constructed assets -- Service life planning -- Part 7:
Performance evaluation for feedback of service life data from practiceISO 15686-6:2004 New Published 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and constructed assets -- Service-life planning -- Part 8:
Reference service life and service-life estimationISO 15686-8:2008 New Published 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and constructed assets -- Service-life planning -- Part 9:
Guidance on assessment of service-life dataISO 15686-9:2008 New Published 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and constructed assets -- Service life planning -- Part 10:
When to assess functional performanceISO 15686-10:2010 New Published 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Buildings and constructed assets -- Service life planning -- Part 11:
TerminologyISO 15686-11:2014 New Published 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Performance standards in building -- Definition and calculation of area
and space indicatorsISO 9836:2017 Revision Circulation 91.040.01
(ISO/TC 59 Sustainability in Buildings and Civil
Engineering Works)
Building Environment design - Indoor environment -- General principles ISO 16813:2006 Reconfirmation Preparatory 91.040.01 (ISO/TC 205 Bulding Environment Design)
Building environment design -- Indoor air quality -- Methods of
expressing the quality of indoor air for human occupancyISO 16814:2008 Reconfirmation Preparatory 91.040.01; 13.040.20 (ISO/TC 205 Bulding Environment Design)
Building environment design -- Energy efficiency -- Terminology ISO 16818:2008 Reconfirmation Preparatory 01.040.91; 91.040.01 (ISO/TC 205 Bulding Environment Design)
Building environment design -- Guidelines to assess energy efficiency of
new buildingsISO 23045:2008 Reconfirmation Preparatory 91.040.01 (ISO/TC 205 Bulding Environment Design)
Facility smart grid information model ISO 17800:2017 New Preparatory 91.040.01 (ISO/TC 205 Bulding Environment Design)
Portable fire extinguishers — Fire rating, classification, performance,
construction, installation and maintenance – SpecificationDPNS 2141:2019 (Development) New Drafting/Deliberation 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Fire fighting — Wheeled fire extinguishers — Performance and
constructionISO 11601:2017 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Standard on Wetting Agents NFPA 18:2017 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
CHEMICAL PRODUCTS
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Gaseous fire-extinguishing systems — Physical properties and system
design — Part 1: General requirementsISO 14520-1:2015 (Adoption) New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Gaseous fire-extinguishing systems — Physical properties and system
design — Part 2: CF3I extinguishantISO 14520-2:2016 (Adoption) New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Gaseous fire-extinguishing systems — Physical properties and system
design - Part 5: FK-5-1-12 extinguishantISO 14520-5:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Gaseous fire-extinguishing systems — Physical properties and system
design - Part 6: HCFC Blend A extinguishantISO 14520-6:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Gaseous fire-extinguishing systems — Physical properties and system
design - Part 8: HFC 125 extinguishantISO 14520-8:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Gaseous fire-extinguishing systems — Physical properties and system
design - Part 9: HFC 227ea extinguishantISO 14520-9:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Gaseous fire-extinguishing systems — Physical properties and system
design - Part 10: HFC 23 extinguishantISO 14520-10:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Gaseous fire-extinguishing systems — Physical properties and system
design - Part 11: HFC 236fa extinguishantISO 14520-11:2016 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Gaseous fire-extinguishing systems — Physical properties and system
design - Part 12: IG-01 extinguishantISO 14520-12:2015 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Gaseous fire-extinguishing systems — Physical properties
and system design - Part 13: IG-100 extinguishantISO 14520-13:2015 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Gaseous fire-extinguishing systems — Physical properties and system
design - Part 14: IG-55 extinguishantISO 14520-14:2015 New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Fire extinguisher ball - Design, construction, and performance DPNS ZZZZ:20xx New Preparatory 13.220.10 BPS/TC 02 Fire Protection and Fire Fighting Equipment
Blended Hydraulic Cements -- Specification PNS 63 Revision Drafting/Deliberation 91.100.10 BPS/TC 3 Cement and Lime
Standard Specification for Masonry Cement PNS ASTM C91/C91M:2013 Revision Circulation 91.100.10 BPS/TC 3 Cement and Lime
Cement Packaging -- Specification PNS 270:2009 Revision Drafting/Deliberation 55.08 BPS/TC 3 Cement and Lime
Standard Specification for Slag Cement for Use in Concrete and Mortars ASTM C989/C989M-18 New Preparatory 91.100.30 BPS/TC 3 Cement and Lime
Standard Specification for Coal Fly Ash and Raw or Calcined Natural
Pozzolan for Use in ConcretePNS ASTM C618:2018 Revision Preparatory 91.100.30 BPS/TC 3 Cement and Lime
Standard Specification for Natural Cement ASTM C10/C10M-14 New Preparatory 91.100.10 BPS/TC 3 Cement and Lime
Standard Specification for Mortar Cement ASTM C1329/C1329M-16a New Preparatory 91.100.10 BPS/TC 3 Cement and Lime
Standard Specification for Moist Cabinets, Moist Rooms and Water
Storage Tanks Used in Testing of Hydraulic Cements and ConcretesPNS ASTM C511:2005 Revision Preparatory 91.100.10 BPS/TC 3 Cement and Lime
Standard Specification for Plastic (Stucco) Cement ASTM C1328/C1328M-12 New Preparatory 91.100.10 BPS/TC 3 Cement and Lime
Standard Specification for Rapid Hardening Hydraulic Cement ASTM C1600/C1600M-17 New Preparatory 91.100.10 BPS/TC 3 Cement and Lime
Standard Specification for Expansive Hydraulic Cement ASTM C845/C845M-18 New Preparatory 91.100.10 BPS/TC 3 Cement and Lime
Gas cylinders — Composite construction — Periodic inspection and
testingISO 11623:2015 New Drafting/Deliberation 23.020.30 BPS/TC 06 Gas Cylinders
Gas cylinders — Refillable composite gas cylinders and tubes —
Design, construction and testing — Part 1: Hoop wrapped fibre
reinforced composite gas cylinders and tubes up to 450 l
ISO 11119-1:2012 Recf. 2018 Revision Circulation 23.020.30 BPS/TC 06 Gas Cylinders
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Gas cylinders -- Refillable composite gas cylinders and tubes -- Design,
construction and testing -- Part 2: Fully wrapped fibre reinforced
composite gas cylinders and tubes up to 450 l with load-sharing metal
liners
ISO 11119-2:2012 Recf. 2018 Revision Preparatory 23.020.30 BPS/TC 06 Gas Cylinders
Gas cylinders -- Refillable composite gas cylinders and tubes -- Design,
construction and testing -- Part 3: Fully wrapped fibre reinforced
composite gas cylinders and tubes up to 450l with non-load-sharing
metallic or non-metallic liners
ISO 11119-3:2013 Recf: 2018 Revision Preparatory 23.020.30 BPS/TC 06 Gas Cylinders
Gas cylinders — Refillable composite gas cylinders — Design,
construction and testing —Part 4: Fully wrapped fibre reinforced
composite gas cylinders up to 150 l with load-sharing welded metallic
liners
ISO 11119-4:2016 New Drafting/Deliberation 23.020.30 BPS/TC 06 Gas Cylinders
Gas cylinders - Refillable seamless steel gas cylinders (low volume
canisters)- Design, construction and testing
ISO 9809-1:2010, ISO 9809-2:2010, and ISO
9809-3:2010New Preparatory & research 23.020.30 BPS/TC 06 Gas Cylinders
Gas cylinders -- Refillable composite gas cylinders and tubes -- Design,
construction and testing -- Part 3: Fully wrapped fibre reinforced
composite gas cylinders and tubes up to 450l with non-load-sharing
metallic or non-metallic liners
ISO 11119-3:2013 Revision Preparatory 23.020.30 BPS/TC 06 Gas Cylinders
Transportable and refillable steel cylinders for liquefied petroleum gas
(LPG) – Part 1: SpecificationFinal Draft PNS 03-1:2019 Revision Drafting/Deliberation 23.020.30 BPS/TC 06 Gas Cylinders
Unplasticized polyvinyl chloride (uPVC) electrical conduit – Specification PNS 14:2005 Revision Drafting/Deliberation 23.040.20 BPS/TC 24 Plastic Pipes and Fittings
Plastics piping systems for hot and cold water installations –
Polypropylene (PP)ISO 15874:2013 (Parts 1, 2, 3, and 5) New Drafting/Deliberation 23.040.20; 91.140.60 BPS/TC 24 Plastic Pipes and Fittings
Polyethylene (PE) pipes for water supply – Specification PNS ISO 4427:2002 Revision Circulation 23.040.20 BPS/TC 24 Plastic Pipes and Fittings
Plastics piping systems for non-pressure underground drainage and
sewerage – Unplasticized poly(vinyl chloride) (PVC-U)ISO 4435:2003 New Preparatory 23.040.20; 93.030 BPS/TC 24 Plastic Pipes and Fittings
Paints and varnishes - Terms and definitions ISO 4618:2014 Revision Preparatory 01.040.87;87.040 BPS/TC 25 Paints and Varnishes
Marine anti-fouling paint – Specification DPNS 2132:20xx New Drafting/Deliberation 87.04 BPS/TC 25 Paints and Varnishes
Marine topcoat – Specification DPNS 2140:20xx New Drafting/Deliberation 87.04 BPS/TC 25 Paints and Varnishes
Standard Practice for Determining Load Resistance of Glass in
BuildingsPNS ASTM E1300:2013 Revision Preparatory 81.040.30 BPS/TC 28 Glass and Glass Products
Standard Test Method for Insulating Glass Unit Performance PNS ASTM E2188:2013 Reconfirmation Circulation 81.040.01 BPS/TC 28 Glass and Glass Products
Standard Test Method for Testing Resistance to Fogging in Insulating
Glass UnitsPNS ASTM E2189:2013 Reconfirmation Circulation 81.040.20 BPS/TC 28 Glass and Glass Products
Standard Specification for Insulating Glass Units Performance and
EvaluationASTM E2190-10 Revision Circulation 81.040.20 BPS/TC 28 Glass and Glass Products
Standard Test Method for Determining Argon Concentration in Sealed
Insulating Glass Units using Gas ChromatographyPNS ASTM E2269:2012 Revision Circulation 71.040.50; 81.040.01 BPS/TC 28 Glass and Glass Products
Standard Test Method for Frost/Dew Point of Sealed Insulating Glass
UnitsASTM E546 - 14 New Circulation 91.060.50 BPS/TC 28 Glass and Glass Products
Standard Specification for Pyrolytic and Vacuum Deposition Coatings on
Flat GlassASTM C1376 - 15 Revision Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Uniform provisions concerning the approval of safety glazing materials
and their installation on vehiclesPNS UN ECE 43:2009 Revision Preparatory BPS/TC 28 Glass and Glass Products
Standard Test Methods for Performance of Glazing in Permanent Railing
Systems, Guards, and BalustradesASTM E2353 - 16 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Standard Specification for Performance of Glazing in Permanent Railing
Systems, Guards, and BalustradesASTM E2358 - 15 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Laminated solar photovoltaic glass for use in
buildingsISO/TS 18178:2018 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Electrochromic glazings -- Accelerated ageing test
and requirementsISO 18543:2017 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Vacuum insulating glass -- Part 1: Basic
specification of products and evaluation methods for thermal and sound
insulating performance
ISO 19916-1:2018 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Silvered, flat-glass mirror ISO 25537:2008 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Determination of the bending strength of glass -- Part
1: Fundamentals of testing glassISO 1288-1:2016 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Determination of the bending strength of glass -- Part
2: Coaxial double-ring test on flat specimens with large test surface
areas
ISO 1288-2:2016 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Determination of the bending strength of glass -- Part
3: Test with specimen supported at two points (four point bending)
ISO 1288-3:2016 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Determination of the bending strength of glass -- Part
4: Testing of channel shaped glassISO 1288-4:2016 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Determination of the bending strength of glass -- Part
5: Coaxial double ring test on flat specimens with small test surface
areas
ISO 1288-5:2016 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Determination of light transmittance, solar direct
transmittance, total solar energy transmittance, ultraviolet transmittance
and related glazing factors
ISO 9050:2003 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Determination of steady-state U values (thermal
transmittance) of multiple glazing -- Guarded hot plate method
ISO 10291:1994 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Calculation of steady-state U values (thermal
transmittance) of multiple glazingISO 10292:1994 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Determination of steady-state U values (thermal
transmittance) of multiple glazing -- Heat flow meter method
ISO 10293:1997 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Determination of energy balance value -- Calculation
methodISO 14438:2002 New Preparatory 81.040.20; 91.120.10 BPS/TC 28 Glass and Glass Products
Glass in building -- Destructive-windstorm-resistant security glazing --
Test and classificationISO 16932:2016 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Explosion-resistant security glazing -- Test and
classification for arena air-blast loadingISO 16933:2007 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Explosion-resistant security glazing -- Test and
classification by shock-tube loadingISO 16934:2007 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Bullet-resistant security glazing -- Test and
classificationISO 16935:2007 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Forced-entry security glazing -- Part 1: Test and
classification by repetitive ball dropISO 16936-1:2005 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Glass in building -- Forced-entry security glazing -- Part 2: Test and
classification by repetitive impact of a hammer and axe at room
temperature
ISO 16936-2:2005 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Forced-entry security glazing -- Part 3: Test and
classification by manual attackISO 16936-3:2005 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Forced-entry security glazing -- Part 4: Test and
classification by pendulum impact under thermally and fire stressed
conditions
ISO 16936-4:2005 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Glazing and airborne sound insulation --
Measurement of the mechanical impedance of laminated glassISO 16940:2008 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Glazing and airborne sound insulation -- Product
descriptions and determination of propertiesISO 22897:2003 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Glass products for structural sealant glazing -- Part
1: Supported and unsupported monolithic and multiple glazing
ISO 28278-1:2011 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Glass products for structural sealant glazing -- Part
2: Assembly rulesISO 28278-2:2010 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Pendulum impact testing and classification of safety
glassISO 29584:2015 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Glass in building -- Glass blocks -- Specification and test methodsISO 21690:2006 New Preparatory 81.040.20 BPS/TC 28 Glass and Glass Products
Standard Test Method for Determining the Static Coefficient of Friction
of Ceramic Tile and Other Like Surfaces by Horizontal Dynamometer
Pull-Meter Method
PNS ASTM C1028:2013 Reconfirmation Preparatory 91.100.25 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles — Part 2: Determination of dimensions and surface qualityPNS ISO 10545-2:2013 Revision Circulation 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles -- Part 4: Determination of modulus of rupture and
breaking strengthPNS ISO 10545-4:2018 Revision Circulation 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles Part 5: Determination of impact resistance by
measurement of coefficient of restitutionPNS ISO 10545-5:2013 Reconfirmation Circulation 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles Part 6: Determination of resistance to deep abrasion for
unglazed tilesPNS ISO 10545-6:2013 Reconfirmation Circulation 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles Part 7: Determination of resistance to surface abrasion for
glazed tilesPNS ISO 10545-7:2013 Reconfirmation Circulation 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles Part 9: Determination of resistance to thermal shockPNS ISO 10545-9:2013 Reconfirmation Circulation 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles Part 11: Determination of crazing resistance for glazed
tilesPNS ISO 10545-11:2013 Reconfirmation Circulation 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles Part 12: Determination of frost resistance PNS ISO 10545-12:2013 Reconfirmation Circulation 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles -- Part 15: Determination of lead and cadmium given off by
glazed tilesPNS ISO 10545-15:2013 Reconfirmation Circulation 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles — Part 16: Determination of small colour differencesPNS ISO 10545-16:2013 Reconfirmation Circulation 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles —Definitions, classification, characteristics and markingPNS ISO 13006:2013 Revision Circulation 01.040.91; 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic Plumbing Fixtures PNS 156:2010 Revision Drafting 81.060.20 BPS/TC 29 Ceramics and Ceramic Products
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Standard Specification for Alumina Ceramics for Electrical and
Electronic ApplicationsASTM D2442-75 (2016) New Preparatory 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles -- Guidelines for installation -- Part 1: Installation of
ceramic wall and floor tilesISO/TR 17870-1:2015 New Finalization 91.100.23 BPS/TC 29 Ceramics and Ceramic Products
Ceramic tiles -- Guidelines for installation -- Part 2: Installation of thin
ceramic wall and floor tiles and panelsISO/TR 17870-2:2015 New Finalization 29.035.30; 81.060.20 BPS/TC 29 Ceramics and Ceramic Products
Standard Test Methods for Vitrified Ceramic Materials for Electrical
ApplicationsASTM D116-86 (2016) New Preparatory 81.040.30; 81.060.01 BPS/TC 29 Ceramics and Ceramic Products
Standard Test Method for Particle Size Distribution of Alumina or Quartz
Powders by Electrical Sensing Zone TechniqueASTM C690 - 09(2014) New Preparatory 81.060.10 BPS/TC 29 Ceramics and Ceramic Products
Standard Guide for Precision Electroformed Wet Sieve Analysis of
Nonplastic Ceramic PowdersASTM C925 - 09(2014) New Preparatory 81.060.10 BPS/TC 29 Ceramics and Ceramic Products
Doors -- Terminology DPNS 933:2019 Revision Drafting/Deliberation 91.060.50; 01.040.91 BPS/TC 34 Doors and Windows
Buildings and civil engineering works — Vocabulary — Part 2: Contract
and communication termsISO 6707-2:2017 New Already adopted by another BPS TC 91.010.20; 01.040.91 BPS/TC 34 Doors and Windows
Steel doors and steel door frames – Glossary DPNS 269:20xx Revision Preparatory 91.060.50 BPS/TC 34 Doors and Windows
Coordinating sizes for doorsets for residential and commercial buildings DPNS 249:20xx (revision of PNS 249:1989) Revision Preparatory 91.060.50 BPS/TC 34 Doors and Windows
Door leaves -- General and local flatness -- Measurement method ISO 6442:2005 New Preparatory 91.060.50 BPS/TC 34 Doors and Windows
Door leaves -- Method for measurement of height, width, thickness and
squarenessISO 6443:2005 Revision Preparatory 91.060.50 BPS/TC 34 Doors and Windows
Test method of doorset opening performance in diagonal deformation --
Seismic aspectsISO 15822:2007 New Preparatory 91.060.50 BPS/TC 34 Doors and Windows
Specification of polypropylene drinking straws ISO 18188:2016 New Circulation 67.250; 83.140.99 BPS/TC 45 Plastics and Plastic Products
Plastics -- Guidelines for the recovery and recycling of plastics waste ISO 15270:2008 Recf.: 2018 New Preparatory 13.030.50; 83.080.01 BPS/TC 45 Plastics and Plastic Products
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle
recyclates -- Part 1: Designation system and basis for specificationsISO 12418-1:2012 Recf: 2018 New Preparation 83.080.20 BPS/TC 45 Plastics and Plastic Products
Fireworks -- Part 1: Classification PNS 1220-1:1994 Revision Circulation 01.040.71; 71.100.30 BPS/TC 50 Fireworks
Fireworks -- Part 2: Specification PNS 1220-2:1994 Revision Circulation 71.100.30 BPS/TC 50 Fireworks
Fireworks -- Part 3: Test Methods DPNS 1220-3 New Circulation 71.100.30 BPS/TC 50 Fireworks
Standard Specification for Liquid Optical Adhesive PNS ASTM D899:2019 New Published 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Specification for Liquid Optical Adhesive PNS ASTM D1101:2019 New Published 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Specification for Liquid Optical Adhesive PNS ASTM D1780:2019 New Published 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Specification for Liquid Optical Adhesive PNS ASTM D1781:2019 New Published 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Specification for Liquid Optical Adhesive PNS ASTM D2851:2005 Revision Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Test Method for Determining Adhesive Shear Strength of
Carpet AdhesivesPNS ASTM D6004:2013 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Test Method for Adhesion of Pressure-Sensitive Tape to
Fiberboard at 90° Angle and Constant StressASTM D2860/D2860M-18 New Preparatory 55.04 BPS/TC 51 Adhesives and Allied Products
Standard Test Method for Adherence to Linerboard of Pressure-
Sensitive Tape at Low TemperatureASTM D3889/D3889M-96(2012) New Preparatory 55.04 BPS/TC 51 Adhesives and Allied Products
Standard Specification for Friction Tape ASTM D4514-12 New Preparatory 29.035.20 BPS/TC 51 Adhesives and Allied Products
Standard Specification for Pressure-Sensitive Tape for Packaging, Box
Closure, and Sealing1, 2ASTM D5486/D5486M-06(2012) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Standard Specification for Pressure-Sensitive Tape for Light-Duty
Packaging and General Purpose MaskingASTM D6123/D6123M-97(2012) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Specification for Pressure-Sensitive Tape for Sealing Fiber
Containers and Cans1, 2ASTM D6590/D6590M-00(2012) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Test Method for Impact Strength of Adhesive Bonds ASTM D950-03(2011) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive
BondsASTM D1062-08(2015) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Practice for Exposure of Adhesive Specimens to Ionizing
RadiationASTM D1879-06(2014) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Test Method for Tensile Strength of Adhesives by Means of
Bar and Rod SpecimensASTM D2095-96(2015) New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Standard Guide for Secondary Seal for Sealed Insulating Glass Units for
Structural Sealant Glazing ApplicationsPNS ASTM C1249:2013 Revision Preparatory 81.040.20 BPS/TC 51 Adhesives and Allied Products
Standard Test Method for Determining the Tensile Properties of an
Insulating Glass Edge Seal for Structural Glazing ApplicationsPNS ASTM C1265:2013 Revision Preparatory 81.040.20 BPS/TC 51 Adhesives and Allied Products
Dentistry -- Denture adhesives ISO 10873:2010 New Preparatory 97.170 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of peel resistance of high-strength adhesive
bonds -- Floating-roller methodPNS ISO 4578:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear
strength by tensile loadingPNS ISO 6237:2014 Revision Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear
strength by compressive loadingPNS ISO 6238:2014 Revision Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives with solvents for assembly of PVC-U pipe elements --
Characterization -- Part 1: Basic test methodsPNS ISO 7387-1:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives for thermoplastic piping systems -- Part 2: Determination of
shear strengthPNS ISO 9311-2:2008 Revision Deliberation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives for thermoplastic piping systems -- Part 3: Test method for
the determination of resistance to internal pressurePNS ISO 9311-3:2012 Reconfirmation Deliberation 83.180; 23.040.01 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test method for shear impact strength of adhesive bondsPNS ISO 9653:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for fatigue properties of structural adhesives
in tensile shearPNS ISO 9664:2008 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Animal glues -- Methods of sampling and testing PNS ISO 9665:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Characterization of durability of structural-adhesive-bonded
assemblies -- Wedge rupture testPNS ISO 10354:2008 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Designation of main failure patterns PNS ISO 10365:2014 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of shear behaviour of structural adhesives --
Part 1: Torsion test method using butt-bonded hollow cylinders
PNS ISO 11003-1:2004 Revision Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of shear behaviour of structural adhesives --
Part 2: Tensile test method using thick adherendsPNS ISO 11003-2:2004 Revision Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of dynamic resistance to cleavage of high-
strength adhesive bonds under impact conditions -- Wedge impact
method
PNS ISO 11343:2008 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Ceramic tiles -- Grouts and adhesives -- Part 1: Terms, definitions and
specifications for adhesivesPNS ISO 13007-1:2014 Reconfirmation Circulation 83.180; 91.100.23 BPS/TC 51 Adhesives and Allied Products
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Ceramic tiles -- Grouts and adhesives -- Part 2: Test methods for
adhesivesPNS ISO 13007-2:2014 Reconfirmation Circulation 83.180; 91.100.23 BPS/TC 51 Adhesives and Allied Products
Ceramic tiles -- Grouts and adhesives -- Part 3: Terms, definitions and
specifications for groutsPNS ISO 13007-3:2014 Reconfirmation Circulation 91.100.10; 91.100.23 BPS/TC 51 Adhesives and Allied Products
Ceramic tiles -- Grouts and adhesives -- Part 4: Test methods for groutsPNS ISO 13007-4:2014 Reconfirmation Circulation 91.100.10; 91.100.23 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of shear strength of adhesive bonds between
rigid substrates by the block-shear methodPNS ISO 13445:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Evaluation of the effectiveness of surface treatment
techniques for aluminium -- Wet-peel test by floating-roller method
PNS ISO 14676:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of resistance to flow (sagging) PNS ISO 14678:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Measurement of adhesion characteristics by a three-point
bending methodPNS ISO 14679:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of cleavage strength of bonded joints PNS ISO 15107:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of strength of bonded joints using a bending-
shear methodPNS ISO 15108:2012 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Methods of preparing bulk specimens -- Part 1: Two-part
systemsPNS ISO 15166-1:2012 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Methods of preparing bulk specimens -- Part 2: Elevated-
temperature-curing one-part systemsPNS ISO 15166-2:2008 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives for thermoplastic piping systems -- Test method for the
determination of thermal stability of adhesivesPNS ISO 15908:2008 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for isotropic electrically conductive adhesives
-- Part 1: General test methodsPNS ISO 16525-1:2014 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for isotropic electrically conductive adhesives
-- Part 2: Determination of electrical characteristics for use in electronic
assemblies
PNS ISO 16525-2:2014 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for isotropic electrically conductive adhesives
-- Part 3: Determination of heat-transfer propertiesPNS ISO 16525-3:2014 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for isotropic electrically conductive adhesives
-- Part 4: Determination of shear strength and electrical resistance using
rigid-to-rigid bonded assemblies
PNS ISO 16525-4:2014 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for isotropic electrically conductive adhesives
-- Part 5: Determination of shear fatiguePNS ISO 16525-5:2014 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for isotropic electrically conductive adhesives
-- Part 6: Determination of pendulum-type shear impact
PNS ISO 16525-6:2014 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for isotropic electrically conductive adhesives
-- Part 7: Environmental test methodsPNS ISO 16525-7:2014 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for isotropic electrically conductive adhesives
-- Part 8: Electrochemical-migration test methodsPNS ISO 16525-8:2014 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for isotropic electrically conductive adhesives
-- Part 9: Determination of high-speed signal-transmission
characteristics
PNS ISO 16525-9:2014 Reconfirmation Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Adhesives for bonding parquet to subfloor -- Test methods
and minimum requirementsPNS ISO 17178:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Structural adhesives -- A standard database of properties PNS ISO 17194:2010 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of temperature dependence of shear
strengthPNS ISO 19212:2008 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Guidelines for the fabrication of adhesively bonded
structures and reporting procedures suitable for the risk evaluation of
such structures
PNS ISO 21368:2007 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of the solubility of water-soluble or alkali-
soluble pressure-sensitive adhesivesPNS ISO 25179:2014 Revision Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for the evaluation and selection of adhesives
for indoor wood products -- Part 1: Resistance to delamination in non-
severe environments
PNS ISO 26842-1:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Test methods for the evaluation and selection of adhesives
for indoor wood products -- Part 2: Resistance to delamination in severe
environments
PNS ISO 26842-2:2014 Reconfirmation Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Self adhesive tapes -- Determination of peel adhesion properties PNS ISO 29863:2014 Revision Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Self adhesive tapes -- Measurement of static shear adhesion PNS ISO 29864:2014 Revision Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Hot-melt adhesives -- Determination of thermal stability ISO 10363:1992 New Circulation 83.180 BPS/TC 51 Adhesives and Allied Products
Ceramic tiles -- Grouts and adhesives -- Part 5: Requirements, test
methods, evaluation of conformity, classification and designation of
liquid-applied waterproofing membranes for use beneath ceramic tiling
bonded with adhesives
ISO 13007-5:2015 New Circulation 91.100.10; 91.100.23 BPS/TC 51 Adhesives and Allied Products
Plastics -- Evaluation of the adhesion interface performance in plastic-
metal assemblies -- Part 1: Guidelines for the approachISO 19095-1:2015 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Plastics -- Evaluation of the adhesion interface performance in plastic-
metal assemblies -- Part 2: Test specimensISO 19095-2:2015 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Plastics -- Evaluation of the adhesion interface performance in plastic-
metal assemblies -- Part 3: Test methodsISO 19095-3:2015 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Plastics -- Evaluation of the adhesion interface performance in plastic-
metal assemblies -- Part 4: Environmental conditions for durability
ISO 19095-4:2015 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Adhesives -- Determination of the mode 1 adhesive fracture energy of
structural adhesive joints using double cantilever beam and tapered
double cantilever beam specimens
ISO 25217:2009 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
Self adhesive tapes -- Measurement of breaking strength and elongation
at breakISO 29864:2018 New Preparatory 83.180 BPS/TC 51 Adhesives and Allied Products
The Ruby Guide CIBJO New Preparatory 39.060 BPS/TC 54 Jewellery
Jewellery and precious metals -- Fineness of precious metal alloys PNS ISO 9202 Revision Circulation 39.060 BPS/TC 54 Jewellery
Standard Consumer Safety Specification for Adult Jewelry ASTM F2999-14 New Circulation 39.060; 97.190 BPS/TC 54 Jewellery
Standarsd Specification for Consumer Product Safety for Chilren's
JewelryASTM F2923-14 New Circulation 39.060 BPS/TC 54 Jewellery
The Saphire Guide CIBJO New Preparatory 39.060 BPS/TC 54 Jewellery
Watch - case and accessories - Gold alloy covering Part I: General
RequirementsPNS ISO 3160-1:2010 Revision Circulation 39.040.10 BPS/TC 54 Jewellery
Watch cases and accessories - Gold alloy coverings - Part 2:
Determination of fineness, thickness, corrosion, resistance, and
adhesion
PNS ISO 3160-2:2010 Revision Circulation 39.040.10 BPS/TC 54 Jewellery
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Watch cases and Accessories - Gold alloy coverings - coating on
standard gaugesPNS ISO 3160-3:2010 Revision Circulation 39.040.10 BPS/TC 54 Jewellery
Jewellery -- Gold alloy coatings PNS ISO 10713:2010 Revision Drafting/Deliberation 39.060 BPS/TC 54 Jewellery
Jewellery – Terms and definition PNS 2053:2013 Revision Preparatory 39.060; 01.040.39 BPS/TC 54 Jewellery
Precious metals – Terminology and Classification PNS 2106:2014 Revision Preparatory 39.060; 01.040.39 BPS/TC 54 Jewellery
Grading polished diamonds - Terminology and classification PNS ISO/TR 11211:2008 Revision Preparatory 39.060; 01.040.39 BPS/TC 54 Jewellery
Determination of platinum in platinum jewellery alloys - Gravimetric
determination by reduction with mercury(I) chloride PNS ISO 11489:2010 Revision Preparatory 39.060 BPS/TC 54 Jewellery
Ductile iron pipes, fittings, accessories and their joints for water
applicationsISO 2531:2009 New Drafting/Deliberation 23.040.10 BPS/TC 61 Ferrous Pipes and Fittings
Standard specification for hubless cast iron soil pipe and fittings for
sanitary and storm drain, waste, and vent piping applications
Specification
DPNS ASTM A888:20xx Revision Preparatory 91.140.60 BPS/TC 61 Ferrous Pipes and Fittings
Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated
(Galvanized) Welded, for Fence StructuresDPNS ASTM F1083:2019 New Drafting/Deliberation 23.040.10 BPS/TC 61 Ferrous Pipes and Fittings
Design method for ductile iron pipes ISO 10803:2011 New Preparatory 77.140.50 BPS/TC 61 Ferrous Pipes and Fittings
Ductile iron pipes for pressurized water lines - Specification PNS 1992:2002 Revision Preparatory 23.040.01; 91.140.80 BPS/TC 61 Ferrous Pipes and Fittings
Earthquake and subsidence-resistant design of ductile iron pipelines ISO 16134:2006 New Preparatory 23.040.10 BPS/TC 61 Ferrous Pipes and Fittings
Footwear -- Critical substances potentially present in footwear and
footwear components -- Determination of phenol in footwear materialsISO 20536:2017 New Circulation 61.060 BPS/TC 67 Footwear
Footwear – Test methods for slide fasteners – Resistance to damage
during closure under a lateral forceISO 18403:2016 New Circulation 61.060 BPS/TC 67 Footwear
Footwear – Test method for the characterization of elastic materials –
Tensile performanceISO 10765:2010 New Circulation 61.060 BPS/TC 67 Footwear
Footwear test method for the determination of the resistance of elastic
materials for footwear to repeated extension – Fatigue resistanceISO 10768:2010 New Circulation 61.060 BPS/TC 67 Footwear
Footwear – Resistance to crack initiation and growth – Bel flex method ISO 16177:2012 New Circulation 61.060 BPS/TC 67 Footwear
Footwear and footwear components – test method to assess
antibacterial activityISO 16187:2013 New Preparatory 61.060 BPS/TC 67 Footwear
Code for Footwear labelling and indication of composition PNS 216:2010 Revision Drafting/Deliberation 61.060 BPS/TC 67 Footwear
Footwear – Test methods for heels and top pieces-Top piece retention
strengthPNS ISO 19958:2011 Revision Preparatory 61.060 BPS/TC 67 Footwear
Footwear - Test methods for heels-Fatigue resistance PNS ISO 19956:2011 Revision Preparatory 61.060 BPS/TC 67 Footwear
Footwear - Test methods for outsoles – Abrasion resistance PNS ISO 120871:2011 Revision Preparatory 61.060 BPS/TC 67 Footwear
Footwear - Test methods for heals- Heel pin holding strength PNS ISO 19957:2011 Revision Preparatory 61.060 BPS/TC 67 Footwear
Footwear - Performance requirements for components for footwear -
InsolesPNS ISO/TR 20881:2011 Revision Preparatory 61.060 BPS/TC 67 Footwear
Footwear - Vocabulary PNS ISO 19952:2011 Revision Circulation 01.040.61; 61.060 BPS/TC 67 Footwear
Nanotechnologies -- Methodology for the classification and
categorization of nanomaterialsISO/TR 11360:2010 New Circulation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Model taxonomic framework for use in developing
vocabularies -- Core conceptsISO/TR 12802:2010 New Circulation 01.040.07; 07.120 BPS/TC 85 Nanotechnologies
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Nanotechnologies -- Considerations for the development of chemical
nomenclature for selected nano-objectsISO/TR 14786:2014 New Circulation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Framework for identifying vocabulary development
for nanotechnology applications in human healthcareISO/TR 17302:2015 New Circulation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Plain language explanation of selected terms from
the ISO/IEC 80004 seriesISO/TR 18401:2017 New Circulation 01.040.07; 07.120 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Standard terms and their definition for cellulose
nanomaterialISO/TS 20477:2017 New Circulation 01.040.07; 07.120 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Vocabulary -- Part 9: Nano-enabled electrotechnical
products and systemsIEC/TS 80004-9:2017 New Circulation 01.040.07; 07.120 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Vocabulary -- Part 11: Nanolayer, nanocoating,
nanofilm, and related termsISO/TS 80004-11:2017 New Circulation 01.040.07; 07.120 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Vocabulary -- Part 13: Graphene and related two-
dimensional (2D) materialsISO/TS 80004-13:2017 New Circulation 01.040.07; 07.120 BPS/TC 85 Nanotechnologies
Nanomaterials -- Quantification of nano-object release from powders by
generation of aerosolsISO/TS 12025:2012 New Circulation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Guidance on voluntary labelling for consumer
products containing manufactured nano-objectsISO/TS 13830:2013 New Circulation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Guidance for developing representative test
materials consisting of nano-objects in dry powder formISO/TS 16195:2013 New Circulation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Generation of metal nanoparticles for inhalation
toxicity testing using the evaporation/condensation methodISO 10801:2010 New Circulation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Characterization of nanoparticles in inhalation
exposure chambers for inhalation toxicity testingISO 10808:2010 New Circulation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnology -- Nanoparticles in powder form -- Characteristics and
measurementsISO/TS 17200:2013 New Circulation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Materials specifications -- Guidance on specifying
nano-objectsISO/TS 12805:2011 New Circulation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Health and safety practices in occupational settings
relevant to nanotechnologiesISO/TR 12885:2008 New Drafting/Deliberation 13.100; 07.120 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Nanoscale calcium carbonate in powder form --
Characteristics and measurementISO/TS 11931:2012 New Drafting/Deliberation 7.12 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Nanoscale titanium dioxide in powder form --
Characteristics and measurementISO/TS 11937:2012 New Drafting/Deliberation 7.12 BPS/TC 85 Nanotechnologies
Nanomanufacturing - Material specifications - Part 2-1: Single-wall
carbon nanotubes - Blank detail specificationIEC PAS 62565-2-1:2011 New Drafting/Deliberation 07.030, 07.120 BPS/TC 85 Nanotechnologies
Nanomanufacturing - Material specifications - Part 4-2: Luminescent
nanomaterials - Detail specification for general lighting and display
applications
IEC TS 62565-4-2:2018 New Drafting/Deliberation 07.030, 07.120 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Occupational risk management applied to
engineered nanomaterials -- Part 1: Principles and approachesISO/TS 12901-1:2012 New Preparatory 13.100; 07.120 BPS/TC 85 Nanotechnologies
Nanotechnologies -- Occupational risk management applied to
engineered nanomaterials -- Part 2: Use of the control banding approachISO/TS 12901-2:2014 New Preparatory 13.100; 07.120 BPS/TC 85 Nanotechnologies
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Nanotechnologies -- Guidance on physico-chemical characterization of
engineered nanoscale materials for toxicologic assessmentISO/TR 13014:2012 New Preparatory 7.12 BPS/TC 85 Nanotechnologies
ISO/TR 13014:2012/Cor 1:2012 New (Corrigendum) Preparatory 7.12 BPS/TC 85 Nanotechnologies
Nanomaterials – Quantification of nano-object release from powders by
generation of aerosolsISO/TS 12025:2012 New Circulation 07.030
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Guidance on voluntary labelling for consumer
products containing manufactured nano-objectsISO/TS 13830:2013 New Circulation 07.030
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Specification for developing representative test
materials consisting of nano-objects in dry powder formISO/TS 16195:2018 New Circulation 07.030
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Characterization of single-wall carbon nanotubes
using transmission electron microscopyISO/TS 10797:2012 New Drafting/Deliberation 07.030
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Characterization of single-wall carbon nanotubes
using scanning electron microscopy and energy dispersive X-ray
spectrometry analysis
ISO/TS 10798:2011 New Drafting/Deliberation 07.030BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Characterization of single-wall carbon nanotubes
using near infrared photoluminescence spectroscopyISO/TS 10867:2010 New Drafting/Deliberation 07.030
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Characterization of single-wall carbon nanotubes
using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption
spectroscopy
ISO/TS 10868:2017 New Drafting/Deliberation 07.120BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Characterization of single-wall carbon nanotubes
using thermogravimetric analysisISO/TS 11308:2011 New Drafting/Deliberation 07.030
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Characterization of volatile components in single-
wall carbon nanotube samples using evolved gas analysis/gas
chromatograph-mass spectrometry
ISO/TS 11251:2010 New Preparatory 07.030BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Characterization of multiwall carbon nanotube
(MWCNT) samplesISO/TR 10929:2012 New Preparatory 07.030.00
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Characterization of multiwall carbon nanotubes –
Mesoscopic shape factorsISO/TS 11888:2017 New Preparatory 07.120
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Determination of elemental impurities in samples of
carbon nanotubes using inductively coupled plasma mass spectrometryISO/TS 13278:2017 New Preparatory 07.120
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Measurement technique matrix for the
characterization of nano-objectsISO/TR 18196:2016 New Preparatory 07.120
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Analysis of nano-objects using asymmetrical-flow
and centrifugal field-flow fractionationISO/TS 21362:2018 New Preparatory 07.120
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Guidance on methods for nano- and microtribology
measurementsISO/TR 11811:2012 New Preparatory 07.030.00
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Characterization of cellulose nanocrystals ISO/TR 19716:2016 New Preparatory 07.030BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Use of UV-Vis absorption spectroscopy in the characterization of
cadmium chalcogenide colloidal quantum dotsISO/TS 17466:2015 New Preparatory 07.030
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanotechnologies – Size distribution and concentration of inorganic
nanoparticles in aqueous media via single particle inductively coupled
plasma mass spectrometry
ISO/TS 19590:2017 New Preparatory 07.120BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Nanomanufacturing – Key control characteristics for CNT film
applications – ResistivityIEC/TS 62607-2-1:2015 New Preparatory 07.030
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Artificial gratings used in nanotechnology – Description and
measurement of dimensional quality parametersIEC/TS 62622:2012 New Preparatory 07.030
BPS/TC 85/SC 1 Nanotechnologies, Subcommittee on
Measurement and Characterization
Fire safety -- Vocabulary ISO 13943:2017 New Circulation 21.060.01 (ISO/TC 92 Fire safety)
Springs - Vocabulary ISO 26909:2009 New Preparatory 21.060.01 (ISO/TC 227 Springs)
Springs - Symbols ISO 16249:2013 New Preparatory 21.160 (ISO/TC 227 Springs)
Machine Finish Uncoated-Book Paper – Specification PNS 221:1988 Revision Circulation BPS/TC 21 Paper, Board and Pulps
Multipurpose Copy Paper – Specification PNS 222:1988 Revision Circulation BPS/TC 21 Paper, Board and Pulps
Facial Tissue – Specification PNS 73:2004 Revision Deliberation BPS/TC 21 Paper, Board and Pulps
Corrugating medium – Specification PNS 166:2002 Revision Deliberation BPS/TC 21 Paper, Board and Pulps
Heavy duty, plain Kraft paper – Specification PNS 124:1988 Revision Preparatory BPS/TC 21 Paper, Board and Pulps
Tagboard – File folders – Specification PNS 71:1986 Revision Preparatory BPS/TC 21 Paper, Board and Pulps
Colored ruled paper – Specification PNS 265:1989 Revision Preparatory BPS/TC 21 Paper, Board and Pulps
Paper – Determination of folding endurancePNS ISO 5626:2013
(ISO Published 1993)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board—Determination of bending stiffness – Resonance
method
PNS ISO 5629:2013
(ISO Published 1993)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Accelerated ageing – Part 1: Dry heat treatment at
105 degrees C
PNS ISO 5630:2013
(ISO Published 1991)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Accelerated ageing – Part 3: Most heat treatment at
80 degrees C and 65% relative humidity
PNS ISO 5630-3:2013
(ISO Published 1996)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Accelerated ageing – Part 4: Dry heat treatment at
120 or 150 degrees C
PNS ISO 5630-4:2013
(ISO Published 1991)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Determination of resistance to water penetrationPNS ISO 5633:2013
(ISO Published 1983)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper – Measurement of dimensional change after immersion in waterPNS ISO 5635:2013
(ISO Published 1978)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Determination of air permeance (medium range) –
Part 1: General method
PNS ISO 5636-1:2013
(ISO Published 1984)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Determination of air permeance (medium range) –
Part 3: Bendtsen method
PNS ISO 5636-3:2013
(ISO Published 1978)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Pulps – Estimation of dirt and shives – Part 4: Instrumental inspection
by reflected light using equivalent Black Area (EBA)
PNS ISO 5350-4:2013
(ISO Published 2006)Revision Preparatory 85.040 BPS/TC 21 Paper, Board and Pulps
Paper and board – Determination of water absorption after immersion in
water
PNS ISO 5637:2013
(ISO Published 1989)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Solid fibreboard – Determination of grammage of single layersPNS ISO 5638:2013
(ISO Published 1978)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Measurement of hygroexpansivity – Part 1:
Hygroexpansivity up to a maximum relative humidity of 68%
PNS ISO 8226-1:2013
(ISO Published 1994)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Measurement of hyroexpansivity – Part 2:
Hygroexpansivity up to a maximum relative humidity of 86%
PNS ISO 8226-2:2013
(ISO Published 1990)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Measurement of specular gloss – Part 2: 75 degree
gloss with a parallel beam, DIN method
PNS ISO 8254-2:2013
(ISO Published 2003)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Measurement of specular gloss –Part 3: 20 degree
gloss with a converging beam TAPPI method
PNS ISO 8254-3:2013
(ISO Published 2004)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Pulp, Paper and board – Microbiological examination – Part 1: Total
count of bacteria, yeast and mould based on disintegration
PNS ISO 8784-1:2013
(ISO Published 2005)Revision Preparatory 07.100.99 ; 07.100.99; 85.060 BPS/TC 21 Paper, Board and Pulps
CONSUMER PRODUCTS AND SERVICES
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Paper and board – Determination of capillary rise – Klemm methodPNS ISO 8787:2013
(ISO Published 1986)Revision Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Handmade Paper – Specification for printing and writing DPNS XXXX:20XX New Deliberation BPS/TC 21 Paper, Board and Pulps
Handmade Paper – Specification for packaging DPNS XXXX:20XX New Deliberation BPS/TC 21 Paper, Board and Pulps
Handmade Paper – Specification for cards DPNS XXXX:20XX New Deliberation BPS/TC 21 Paper, Board and Pulps
Food Board Paper – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and Pulps
Box Board – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and Pulps
Chip Board – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and Pulps
Paper Towel – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and Pulps
Table Napkin – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and Pulps
Parchment Paper – Specification DPNS XXXX:20XX New Preparatory BPS/TC 21 Paper, Board and Pulps
Paper and board – Testing of cores – Part 6: Determination of bending
strength by the three-point methodISO 11093-6:2005 New Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Testing of cores – Part 7: Determination of flexural
modulus by the three-point methodISO 11093-7:2011 New Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Testing of cores – Part 8: Determination of natural
frequency and flexural modulus by experimental modal analysisISO 11093-8:2017 New Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Paper and board – Testing of cores – Part 9: Determination of flat crush
resistanceISO 11093-9:2006 New Preparatory 85.060 BPS/TC 21 Paper, Board and Pulps
Tissue paper and tissue products – Part 4: Determination of tensile
strength, stretch at maximum force and tensile energy absorptionISO 12625-4:2016 New Preparatory 85.080.20 BPS/TC 21 Paper, Board and Pulps
Tissue paper and tissue products – Part 5: Determination of wet tensile
strengthISO 12625-5:2016 New Preparatory 85.080.20 BPS/TC 21 Paper, Board and Pulps
Tissue paper and tissue products – Part 6: Determination of grammage ISO 12625-6:2016 New Preparatory 85.080.20 BPS/TC 21 Paper, Board and Pulps
Tissue paper and tissue products – Part 7: Determination of optical
properties – Measurement of brightness and colour with D65/10 (outdoor
daylight)
ISO 12625-7:2014 New Preparatory 85.080.20 BPS/TC 21 Paper, Board and Pulps
Tissue paper and tissue products – Part 8: Water-absorption time and
water-absorption capacity, basket immersion test methodISO 12625-8:2010 New Preparatory 85.080.20 BPS/TC 21 Paper, Board and Pulps
Tissue paper and tissue products – Part 9: Determination of ball burst
strengthISO 12625-9:2015 New Preparatory 85.080.20 BPS/TC 21 Paper, Board and Pulps
Tissue paper and tissue products – Part 12: Determination of tensile
strength of perforated lines – Calculation of perforation efficiencyISO 12625-12:2015 New Preparatory 59.060.01 BPS/TC 21 Paper, Board and Pulps
Textiles -- Methods for determination of certain aromatic amines derived
from azo colorants -- Part 1: Detection of the use of certain azo colorants
accessible with and without extracting the fibres
ISO 14362-1:2017 New Preparatory 59.060.01 BPS/TC 18 Textiles
Textiles -- Methods for determination of certain aromatic amines derived
from azo colorants -- Part 3: Detection of the use of certain azo
colorants, which may release 4-aminoazobenzene
ISO 14362-3:2017 New Preparatory 59.060.01 BPS/TC 18 Textiles
Textiles -- Dyestuffs -- Part 1: General principles of testing coloured
textiles for dyestuff identificationISO 16373-1:2015 New Preparatory 59.060.01 BPS/TC 18 Textiles
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Textiles -- Determination of deodorant property -- Part 4: Condensation
sampling analysisISO 17299-4:2015 New Preparatory 59.060.01 BPS/TC 18 Textiles
Textiles -- Quantitative analysis of cashmere, wool, other specialty
animal fibers and their blends -- Part 1: Light microscopy methodISO 17751-1:2016 New Preparatory 59.060.10 BPS/TC 18 Textiles
Textiles -- Quantitative analysis of cashmere, wool, other specialty
animal fibers and their blends -- Part 2: Scanning electron microscopy
method
ISO 17751-2:2016 New Preparatory 59.060.10 BPS/TC 18 Textiles
Sewing Thread-Specification PNS 28:1984 Amd.01:1988 Revision Preparatory 59.060.01 BPS/TC 18 Textiles
Spun yarns - Specification PNS 76:1998 Revision Preparatory 59.060.01 BPS/TC 18 Textiles
Code for labelling finished textile fabrics ready made garments and piece
goodsPNS 198:1988 Revision Preparatory 59.060.01 BPS/TC 18 Textiles
Textile - Polyester filament yarns - Grading PNS 257:1990 Revision Preparatory 59.060.01 BPS/TC 18 Textiles
Gel ink ball pens and refills - Part 1: General use ISO 27668-1:2017 New Finalization 97.180 BPS/TC 37 School and Office Supplies
Gel ink ball pens and refills - Part 2: Documentary use (DOC) ISO 27668-2:2009 New Fnalization 97.180 BPS/TC 37 School and Office Supplies
Hand-held Cutter DPNS XXXX:20XX New Preparatory BPS/TC 37 School and Office Supplies
Clip, foldback (binder clip) DPNS XXXX:20XX New Preparatory BPS/TC 37 School and Office Supplies
Correction Tape DPNS XXXX:20XX New Preparatory BPS/TC 37 School and Office Supplies
Pressure sensitive adhesive masking paper tapes – Specification PNS 712:2008 Revision Circulation 55.050 BPS/TC 37 School and Office Supplies
Pressure sensitive adhesive tapes - Glossary of terms PNS 713:1992 Revision Circulation 55.050 BPS/TC 37 School and Office Supplies
Pressure sensitive adhesive tapes - Test methods PNS 878:1992 Revision Circulation 55.050 BPS/TC 37 School and Office Supplies
Pressure sensitive adhesive filmic and packaging tapes – Specification PNS 2041:2008 Revision Drafting/Deliberation 55.040 BPS/TC 37 School and Office Supplies
Stapler- specification PNS 1561:2008 Revision Drafting/Deliberation 83.040.10 BPS/TC 37 School and Office Supplies
Puncher- specification PNS 1987:2012 Revision Preparatory 97.180 BPS/TC 37 School and Office Supplies
Ruler - Specification PNS 1969:2004 Revision Preparatory 59.080.50 BPS/TC 37 School and Office Supplies
Intermediate bulk containers (IBCs) for non-dangerous goods --
TerminologyISO 15867:2003 New Circulation 55.080; 01.040.55 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Complete, filled transport packages and unit loads --
Dimensions of rigid rectangular packagesISO 3394:2012 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Complete, filled transport packages and unit loads -- Unit
load dimensionsISO 3676:2012 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Complete, filled transport packages -- Distribution trials -- Information to
be recordedISO 4178:1980 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Tactile warnings of danger -- Requirements ISO 8351-2:1994 New Preparatory 55.080 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Dimensional tolerances for general purpose sacks -- Part 2:
Sacks made from thermoplastic flexible filmISO 8367-2:1993 New Preparatory 55.080 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Accessible design -- General requirements ISO 11156:2011 New Circulation 11.180.99; 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Tactile warnings of danger -- Requirements ISO 11683:1997 New Preparatory 11.180.30; 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Sacks made from thermoplastic flexible film -- Tear
propagation on edge foldsISO 11897:1999 New Preparatory 55.080 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Sacks -- Determination of the friction of filled sacks ISO 15119:2000 New Preparatory 55.080 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Bar code and two-dimensional symbols for shipping,
transport and receiving labelISO 15394:2017 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Steel drums -- Part 1: Removable head (open head) drums
with a minimum total capacity of 208 l, 210 l and 216,5 lISO 15750-1:2002 New Preparatory 55.140 BPS/TC 40 Packaging and Packaging Materials
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Packaging -- Steel drums -- Part 2: Non-removable head (tight head)
drums with a minimum total capacity of 212 l, 216,5 l and 230 lISO 15750-2:2002 New Preparatory 55.140 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Steel drums -- Part 3: Inserted flange-type closure systems ISO 15750-3:2002 New Preparatory 55.140 BPS/TC 40 Packaging and Packaging Materials
Direct Marking on Plastic Returnable Transport Items (RTIs) ISO/TR 17350:2013 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Braille on packaging for medicinal products ISO 17351:2013 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Application Guideline on Data Carriers for Supply Chain Management ISO/TR 17370:2013 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Codification of contents for inventories for shipments of
household goods and personal effects -- Part 1: Numeric codification of
inventories
ISO 17451-1:2016 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Codification of contents for inventories for shipments of
household goods and personal effects -- Part 2: XML messaging
structure for electronic transmission of inventory data
ISO/TS 17451-2:2017 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Label material -- Required information for ordering and
specifying self-adhesive labelsISO/TS 18614:2016 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Transport packaging -- Reusable, rigid plastic distribution boxes -- Part
1: General purpose applicationISO 18616-1:2016 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials
Transport packaging -- Reusable, rigid plastic distribution boxes -- Part
2: General specifications for testingISO 18616-2:2016 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials
Transport packaging -- Small load container systems -- Part 1: Common
requirements and test methodsISO 19709-1:2016 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Transport packaging -- Small load container systems -- Part 2: Column
Stackable System (CSS)ISO/TS 19709-2:2016 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Transport packaging -- Small load container systems -- Part 3: Bond
Stackable System (BSS)ISO/TS 19709-3:2016 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Accessible design -- Information and marking ISO 19809:2017 New Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Plastics drums -- Part 1: Removable head (open head)
drums with a nominal capacity of 113,6 l to 220 lISO 20848-1:2006 New Preparatory 55.14 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Plastics drums -- Part 2: Non-removable head (tight head)
drums with a nominal capacity of 208,2 l and 220 lISO 20848-2:2006 New Preparatory 55.140 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Plastics drums -- Part 3: Plug bung closure systems for
plastics drums with a nominal capacity of 113,6 l to 220 lISO 20848-3:2018 New Preparatory 55.140 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Tamper verification features for medicinal product
packagingISO 21976:2018 New Preparatory 11.120.99 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Linear bar code and two-dimensional symbols for product
packagingISO 22742:2010 New Preparatory 01.080.99 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Labelling and direct product marking with linear bar code
and two-dimensional symbolsISO 28219:2017 New Preparatory 55.020; 35.040.50 BPS/TC 40 Packaging and Packaging Materials
Packaging – Sacks – Vocabulary and types – Part 2: Sacks made from
thermoplastic flexible filmPNS ISO 6590-2:2011 Revision Preparatory 55.080; 01.040.55 BPS/TC 40 Packaging and Packaging Materials
Packaging -- Sacks -- Description and method of measurement -- Part
2: Empty sacks made from thermoplastic flexible filmPNS ISO 6591-2:2011 Revision Preparatory 55.08 BPS/TC 40 Packaging and Packaging Materials
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Packaging -- Sacks -- Method of sampling empty sacks for testing PNS ISO 7023:2011 Revision Preparatory 55.08 BPS/TC 40 Packaging and Packaging Materials
Sacks -- Drop test -- Part 2: Sacks made from thermoplastic flexible film PNS ISO 7965-2:2009 Revision Preparatory 55.08 BPS/TC 40 Packaging and Packaging Materials
Bags for solid fertilizer - Specification PNS 95:1987 Revision Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Packaging code – Adhesive for packaging PNS 714:1992 Revision Preparatory 55.020 BPS/TC 40 Packaging and Packaging Materials
Standard Test Methods for Polariscopic Examination of Glass
ContainersASTM C148-17 Revision Circulation 55.100
BPS/TC 40 Packaging and Packaging Materials/SC 1
Glass Containers
Standard Practice for Sampling Glass Containers ASTM C224-78 Reconfirmation Drafting/Deliberation 55.100BPS/TC 40 Packaging and Packaging Materials/SC 1
Glass Containers
Glass containers – Vacuum lug finishes – Part 10: 77 regular ISO 9100-10:2005 Reconfirmation Preparatory 55.100BPS/TC 40 Packaging and Packaging Materials/SC 1
Glass Containers
Glass containers – Vacuum lug finishes – Part 11: 82 regular ISO 9100-11:2005 Reconfirmation Preparatory 55.100BPS/TC 40 Packaging and Packaging Materials/SC 1
Glass Containers
Glass containers – Vacuum lug finishes – Part 12: 89 regular ISO 9100-12:2005 Reconfirmation Preparatory 55.100BPS/TC 40 Packaging and Packaging Materials/SC 1
Glass Containers
Glass containers – Vacuum lug finishes – Part 13: 100 ISO 9100-13:2005 Reconfirmation Preparatory 55.100BPS/TC 40 Packaging and Packaging Materials/SC 1
Glass Containers
Glass containers – Vacuum lug finishes – Part 14: 110 regular ISO 9100-14:2005 Reconfirmation Preparatory 55.100BPS/TC 40 Packaging and Packaging Materials/SC 1
Glass Containers
Test Method for determining compressive resistance of shipping
containers, components, and unit loadsASTM D642-15 New Finalization 55.180.40
BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Complete, filled transport packages – Compression and stacking tests
using a compression testerISO 12048:1994 New Finalization 55.180.40
BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Complete, filled transport packages and unit loads – Conditioning for
testingISO 2233:2000 New Circulation 55.180.40
BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Complete, filled transport packages and unit loads – Stacking tests
using a static loadISO 2234:2000 New Circulation 55.180.40
BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Complete, filled transport packages and unit loads – identification of
parts when testingISO 2206:1987 New Circulation 55.180.40
BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Complete, filled transport packages – Toppling test ISO 8768:1986 New Circulation 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Packaging -- Complete, filled transport packages and unit loads --
Vertical random vibration testISO 13355:2016 New Preparatory 55.180.40
BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Complete, filled transport packages and unit loads – Sinusoidal vibration
tests using a variable frequencyISO 8318:2000 New Preparatory 55.180.40
BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Paper bag DPNS XXXX:20XX New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Complete, filled transport packages – Stability of unit loads ISO 10531:1992 New Preparatory 55.180.40 BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Packaging – Complete, filled transport packages and unit loads – Water-
spray testPNS ISO 2875:2010 Reconfirmation Preparatory 55.180.40
BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Standard Practice for Fabrication of Fiberboard Shipping Boxes PNS ASTM D 5118/D 5118M:2010 Revision Circulation 55.160BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Standard Practice for fabrication and closure of triple-wall corrugated PNS ASTM D 5168:2010 Revision Preparatory 55.040BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Standard Guide for Hand Hole Design in Corrugated Boxes PNS ASTM D 6804:2010 Revision Preparatory 55.160BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Standard Practice for Methods of Closing, Sealing and Reinforcing
Fiberboard BoxesPNS ASTM D 1974:2010 Revision Deliberation 55.180.20
BPS/TC 40 Packaging and Packaging Materials/SC 2
Paper Packaging
Quality management systems - Guidelines for the application of ISO
9001 in local governmentISO 18091 New Finalization 03.100.70 BPS/TC 71 Government Quality Management System
Quality management Systems for Public Sector (National and LGUs) DPNS XXXX:20XX New Preparatory BPS/TC 71 Government Quality Management System
Guidance on outsourcing PNS ISO 37500:2014
(ISO Published 2014)Revision Deliberation 03.080.01 BPS/TC 79 Business Process Management
Customer contact centres – Part 1: Requirements for customer contact
centresISO 18295-1:2017 New (Adoption) Preparatory 03.080.30 BPS/TC 79 Business Process Management
Customer contact centres – Part 2: Requirements for clients using the
services of customer contact centresISO 18295-2:2017 New (Adoption) Preparatory 03.080.30 BPS/TC 79 Business Process Management
Cross-border trade of second-hand goods ISO 20245:2017 New Circulation 03.080.30 BPS/TC 81 Consumer Policy
Guidance on unit Pricing ISO 21041:2018 New Circulation 03.100.20; 03.080.30 BPS/TC 81 Consumer Policy
Consumer product safety – Guidelines for suppliers PNS ISO 10377:2014 Revision Preparatory 03.080.30; 13.120; 97.020 BPS/TC 81 Consumer Policy
Packaging – Recommendations for addressing consumer needs ISO/IEC Guide 41:2018 Revision Preparatory 55.020; 01.120 BPS/TC 81 Consumer Policy
Products and related services – information for consumers ISO/IEC Guide 14:2018 Revision Preparatory 01.120 ; 97.020 BPS/TC 81 Consumer Policy
Safety aspects – Guidelines for child safety in standards and other
specificationsISO/IEC Guide 50:2014 Revision Preparatory 01.120 ; 97.190 BPS/TC 81 Consumer Policy
Safety aspects – Guidelines for their inclusion in standards ISO/IEC Guide 51:2014 Revision Preparatory 1.120 BPS/TC 81 Consumer Policy
Graphical Symbols – Technical guidelines for the consideration of
consumers’ needsISO/IEC Guide 74:2004 Revision Preparatory 97.020; 01.080.01 BPS/TC 81 Consumer Policy
Development of service standards – Recommendations for addressing
consumer issuesISO/IEC Guide 76:2008 Revision Preparatory 03.080.01 BPS/TC 81 Consumer Policy
Instructions for use of products by consumers ISO/IEC Guide 37:2012 Revision Preparatory 03.080.30; 01.120 BPS/TC 81 Consumer Policy
Sustainable cities and communities -- Indicators for city services and
quality of lifeISO 37120:2018 Revision Finalization 13.020.20 BPS/TC 82 Sustainable Cities and Communities
Sustainable development in communities - Inventory of existing
guidelines and approaches on sustainable development and resilience in
cities
ISO/TR 37121:2017 New Finalization 13.020.20 BPS/TC 82 Sustainable Cities and Communities
Sustainable cities and communities - Guidance on establishing smart
city operating models for sustainable communitiesISO 37106:2018 New Finalization 13.020.20 BPS/TC 82 Sustainable Cities and Communities
Smart community infrastructures - Review of existing activities relevant
to metricsISO/TR 37150:2014 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities
Smart community infrastructures - Principles and requirements for
performance metricsISO/TS 37151:2015 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities
Smart community infrastructures - Common framework for
development and operationISO/TR 37152:2016 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities
Smart community infrastructures - Maturity model for assessment and
improvementISO 37153:2017 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities
Smart community infrastructures - Best practice guidelines for
transportationISO 37154:2017 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities
Smart community infrastructures - Smart transportation for compact
citiesISO 37157:2017 New Preparatory 13.020.20 BPS/TC 82 Sustainable Cities and Communities
Sea Freight Transport DPNS XXXX:20XX New Preparatory BPS/TC 84 Logistics
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Air Freight Transport DPNS XXXX:20XX New Preparatory BPS/TC 84 Logistics
Intelligent transport systems -- Freight land conveyance content
identification and communication (FLC-CIC) -- Part 1: Context,
architecture and referenced standards
ISO 26683-1:2013 New Preparatory 55.180.01 ; 35.240.60 BPS/TC 84 Logistics
Intelligent transport systems -- Freight land conveyance content
identification and communication -- Part 2: Application interface profilesISO 26683-2:2013 New Preparatory 55.180.01 ; 35.240.60 BPS/TC 84 Logistics
Intelligent transport systems -- Freight land conveyance content
identification and communication -- Part 3: Monitoring cargo condition
information during transport
ISO/DIS 26683-3:XXXX New Preparatory 55.180.01 ; 35.240.60 BPS/TC 84 Logistics
Intelligent transport systems (ITS) -- Cooperative intersection signal
information and violation warning systems (CIWS) -- Performance
requirements and test procedures
ISO 26683-4:2013 New Preparatory BPS/TC 84 Logistics
Intelligent transport systems -- Electronic information exchange to
facilitate the movement of freight and its intermodal transfer -- Road
transport information exchange methodology
ISO/TS 24533:2012 New Preparatory 03.220.20 ; 35.240.60 ; 55.180.01 BPS/TC 84 Logistics
Standard Practice for Performance Testing of Shipping Containers and
SystemsASTM D4169 - 16 New Preparatory BPS/TC 84 Logistics
Wheelchairs - Part 6: Determination of maximum speed of electrically
powered wheelchairsISO 7176-6:2018 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchairs -- Part 9: Climatic tests for electric wheelchairs ISO 7176-9:2009 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchairs -- Part 16: Resistance to ignition of postural support
devicesISO 7176-16:2012 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchairs -- Part 19: Wheeled mobility devices for use as seats in
motor vehiclesISO 7176-19:2008/Amd 1:2015 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchairs -- Part 22: Set-up procedures ISO 7176-22:2014 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Technical systems and aids for disabled or handicapped persons --
Wheelchair tiedown and occupant-restraint systems -- Part 1:
Requirements and test methods for all systems
ISO 10542-1:2012/Cor 1:2013 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchairs - Part 4: Energy consumption of electric wheelchairs and
scooters for determination of theoretical distance rangeISO 7176-4:2008 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchairs - Part 10: Determination of obstacle-climbing ability of
electrically powered wheelchairsISO 7176-10:2008 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchairs - Part 14: Power and control systems for electrically
powered wheelchairs and scooters -- Requirements and test methodsISO 7176-14:2008 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchairs - Part 21: Requirements and test methods for
electromagnetic compatibility of electrically powered wheelchairs and
scooters, and battery
ISO 7176-21:2009 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Ostomy collection bags - Part 1: Vocabulary ISO 8670-1:1988 Reconfirmation Preparatory 11.180.20 (ISO/TC 173 Assistive Products)
Ostomy collection bags - Part 2: Requirements and test methods ISO 8670-2:1996 Reconfirmation Preparatory 11.180.20 (ISO/TC 173 Assistive Products)
Urine absorbing aids - Vocabulary -- Part 1: Conditions of urinary
incontinenceISO 9949-1:1993 Reconfirmation Preparatory 01.040.11 (ISO/TC 173 Assistive Products)
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Hoists for the transfer of disabled persons - Requirements and test
methodsISO 10535:2006 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Assistive products for persons with vision impairments and persons with
vision and hearing impairments - Acoustic and tactile signals for
pedestrian traffic lights
ISO 23600:2007 Reconfirmation Preparatory 11.180.30 (ISO/TC 173 Assistive Products)
Absorbent incontinence aids for urine and/or faeces - General guidelines
on evaluationISO 15621:2017 Revision Preparatory 11.180.20 (ISO/TC 173 Assistive Products)
Assistive products for persons with disability - Classification and
terminologyISO 9999:2016 Revision Preparatory 11.180.01 (ISO/TC 173 Assistive Products)
Wheelchairs - Part 2: Determination of dynamic stability of electrically
powered wheelchairsISO 7176-2:2017 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchair seating - Part 2: Determination of physical and mechanical
characteristics of seat cushions intended to manage tissue integrityISO 16840-2:2018 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchair seating - Part 3: Determination of static, impact and
repetitive load strengths for postural support devicesISO 16840-3:2014 Revision Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchair seating - Part 4: Seating systems for use in motor vehicles ISO 16840-4:2009 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Urine collection bags - Part 1: Vocabulary ISO 8669-1:1988 Reconfirmation Preparatory 01.040.11; 11.180.20 (ISO/TC 173 Assistive Products)
Urine collection bags - Part 2: Requirements and test methods ISO 8669-2:1996 Reconfirmation Preparatory 11.180.20 (ISO/TC 173 Assistive Products)
Urine-absorbing aids for incontinence - Test methods for characterizing
polymer-based absorbent materials - Part 1: Determination of pHISO 17190-1:2001 Reconfirmation Preparatory 11.180.20 (ISO/TC 173 Assistive Products)
Assistive products for walking manipulated by one arm - Requirements
and test methods - Part 1: Elbow crutchesISO 11334-1:2007 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Walking aids manipulated by one arm - Requirements and test methods
- Part 4: Walking sticks with three or more legsISO 11334-4:1999 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Assistive products for personal hygiene that support users -
Requirements and test methodsISO 17966:2016 Reconfirmation Preparatory 11.180.99; 11.180.01 (ISO/TC 173 Assistive Products)
Assistive products for blind and vision-impaired persons - Tactile
walking surface indicatorsISO 23599:2012 Reconfirmation Preparatory 11.180.30 (ISO/TC 173 Assistive Products)
Tips for assistive products for walking - Requirements and test methods -
Part 1: Friction of tipsISO 24415-1:2009 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Tips for assistive products for walking - Requirements and test methods -
Part 2: Durability of tips for crutchesISO 24415-2:2011 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchairs - Part 21: Requirements and test methods for
electromagnetic compatibility of electrically powered wheelchairs and ISO 7176-21:2009 Reconfirmation Preparatory 11.180.10; 33.100.01 (ISO/TC 173 Assistive Products)
Wheelchairs - Part 26: Vocabulary ISO 7176-26:2007 Reconfirmation Preparatory 11.180.10; 01.040.11 (ISO/TC 173 Assistive Products)
Wheelchairs - Part 28: Requirements and test methods for stair-
climbing devicesISO 7176-28:2012 Reconfirmation Preparatory 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchair containment and occupant retention systems for accessible
transport vehicles designed for use by both sitting and standing
passengers - Part 1: Systems for rearward-facing wheelchair-seated
passengers
ISO 10865-1:2012 Reconfirmation Preparatory 43.100; 11.180.10 (ISO/TC 173 Assistive Products)
Wheelchair seating - Part 1: Vocabulary, reference axis convention and
measures for body segments, posture and postural support surfacesISO 16840-1:2006 Reconfirmation Preparatory 01.040.11; 11.180.10 (ISO/TC 173 Assistive Products)
Tourism and related services - Yacht harbours Part 2: Minimum
requirements for intermediate service level harbours.ISO 13687-2:2017 New Preparatory 03.080.30; 03.200.99 ( ISO/TC 228 Tourism and Related Services)
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Tourism and related services - Yacht harbours - Part 3: Minimum
requirements for high service level harbours. ISO 13687-3:2017 New Preparatory 03.080.30; 03.200.99 ( ISO/TC 228 Tourism and Related Services)
Tourism and related services - Bareboat charter - Minimum service and
equipment requirements. ISO 20410:2017 New Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Tourism and related services - Sustainability management system for
accommodation establishments – Requirements.ISO 21401:2018 New Preparatory 03.100.70; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Recreational diving services - Requirements for training programmes on
enriched air nitrox (EAN) diving. ISO 11107:2009 Reconfirmation Preparatory 03.080.30; 03.200.99 ( ISO/TC 228 Tourism and Related Services)
Recreational diving services - Requirements for introductory
programmes to scuba divin.ISO 11121:2017 Revision Preparatory 03.200.99; 03.080.30 ( ISO/TC 228 Tourism and Related Services)
Tourism and related services - Requirements and recommendations for
beach operation.ISO 13009:2015 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Recreational diving services - Requirements for the conduct of
snorkelling excursions.ISO 13289:2011 Reconfirmation Preparatory 03.200.99; 03.080.30 ( ISO/TC 228 Tourism and Related Services)
Recreational diving services - Requirements for gas blender training
programmes.ISO 13293:2012 Reconfirmation Preparatory 03.200.99; 03.080.30 ( ISO/TC 228 Tourism and Related Services)
Tourism and related services - Yacht harbours - Part 1: Minimum
requirements for basic service level harbours.ISO 13687-1:2017 Revision Preparatory 03.080.30; 03.200.99 ( ISO/TC 228 Tourism and Related Services)
Tourism services - Industrial tourism - Service provision ISO 13810:2015 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Tourism and related services - Guidelines on developing environmental
specifications for accommodation establishments.ISO/TS 13811:2015 Reconfirmation Preparatory 13.020.01; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Recreational diving services - Requirements for the training of
recreational snorkelling guidesISO 13970:2011 Reconfirmation Preparatory 03.100.30; 03.200.99 ; 03.080.30 ( ISO/TC 228 Tourism and Related Services)
Tourist information offices - Tourist information and reception services -
RequirementsISO 14785:2014 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Tourism and related services - Wellness spa - Service requirements ISO 17679:2016 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Tourism and related services - Thalassotherapy - Service requirements ISO 17680:2015 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Tourism and related services - Tourist services for public use provided
by Natural Protected Areas Authorities – RequirementsISO 18065:2015 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Tourism services - Hotels and other types of tourism accommodation –
Terminology. ISO 18513:2003 Reconfirmation Preparatory 01.040.03; 03.080.30 ( ISO/TC 228 Tourism and Related Services)
Adventure tourism - Safety management systems – Requirements. ISO 21101:2014 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Adventure tourism - Leaders - Personnel competence. ISO/TR 21102:2013 Reconfirmation Preparatory 03.080.30; 03.200.01 ( ISO/TC 228 Tourism and Related Services)
Safety of amusement rides and amusement devices - Part 1: Design
and manufactureISO 17842-1:2015 New Preparatory 97.200.40
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Safety of amusement rides and amusement devices -- Part 2: Operation
and useISO 17842-2:2015 New Preparatory 97.200.40
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Safety of amusement rides and amusement devices -- Part 3:
Requirements for inspection during design, manufacture, operation and
use
ISO 17842-3:2015 New Preparatory 97.200.40
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Biomechanical effects on amusement ride passengers ISO/TS 17929:2014 New Preparatory 13.180; 97.200.40
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Test Method for Composite Foam Hardness-Durometer
HardnessASTM F1957-99(2017) New Preparatory 83.1
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practice for Special Requirements for Bumper Boats ASTM F2460-11 New Preparatory 47.08
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practice for Permanent Amusement Railway Ride Tracks and
Related DevicesASTM F2960-16 New Preparatory 97.200.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practice for Operations of Amusement Railway Rides,
Devices, and FacilitiesASTM F3054-18 New Preparatory 97.200.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practice for Aerial Adventure Courses ASTM F2959-18 New Preparatory 91.040.99; 97.220.10
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practice for Design, Manufacture, Installation, Operation,
Maintenance, Inspection and Major Modification of Trampoline CourtsASTM F2970-17 New Preparatory 97.220.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practices for Parasailing ASTM F3099-17a New Preparatory 97.220.40
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practice for Classification, Design, Manufacture, Construction,
and Operation of Water Slide SystemsASTM F2376-17a New Preparatory 97.200.40; 97.220.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practice for Manufacture, Construction, Operation, and
Maintenance of Aquatic Play EquipmentASTM F2461-18 New Preparatory 97.220.10; 97.220.40
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practice for Classification, Design, Manufacture, Construction,
Maintenance, and Operation of Stationary Wave SystemsASTM F3133-18 New Preparatory 97.220.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practice for Patron Transportation Conveyors Used with a
Water Related Amusement Ride or DeviceASTM F3158-16 New Preparatory 97.200.40; 97.220.40
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
Standard Practice for Design, Manufacture, Operation, Maintenance,
and Inspection of Amusement Rides and Devices, in CanadaASTM F2783-17 New Preparatory 97.220.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
"PNS ASTM F2137:2012 Standard Practice for Measuring the Dynamic
Characteristics of Amusement Rides and Devices"ASTM F2137-18 Revision Preparatory 97.220.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
"PNS ASTM F747:2012 Standard Terminology Relating to Amusement
Rides and Devices"ASTM F747-15 Revision Preparatory 01.040.97; 97.200.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
"PNS ASTM F1159:2012 Standard Practice for Design of Amusement
Rides and Devices that are Outside the Purview of Other F24 Design
Standards"
ASTM F1159-16 Revision Preparatory 97.220.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
"PNS ASTM F1193:2012 Standard Practice for Quality, Manufacture,
and Construction of Amusement Rides and Devices"ASTM F1193-18a Revision Preparatory 97.220.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
"PNS ASTM F2291:2012 Standard Practice for Design of Amusement
Rides and Devices"ASTM F2291-18 Revision Preparatory 97.200.50
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
"PNS ASTM F2375:2012 Standard Practice for Design, Manufacture,
Installation and Testing of Climbing Nets and Netting/Mesh used in
Amusement Rides, Devices, Play Areas and Attractions"
ASTM F2375-09(2017) Revision Preparatory 97.200.40
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
"PNS ASTM F853:2012 (Replaced by F2974-18) Standard Practice for
Auditing Amusement Rides and Devices"ASTM F2974-18 Revision Preparatory 97.220.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)
"PNS ASTM F770:2012 Standard Practice for Ownership, Operation,
Maintenance, and Inspection of Amusement Rides and Devices"ASTM F770-18 Revision Preparatory 97.220.99
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Amusement Rides and Devices)"PNS ASTM F2374:2012 Standard Practice for Design, Manufacture,
Operation, and Maintenance of Inflatable Amusement Devices"ASTM F2374-17 Revision Preparatory 97.200.50
(ISO/TC 254 Safety Of Amusement Rides And
Amusement Devices and ASTM Committee F24 on
Handmade Paper – Specification for printing and writing DPNS 2039:20XX New Circulation BPS TC 21/SC1 Handmade Paper
Handmade Paper – Specification for packaging DPNS 2052:20XX New Circulation BPS TC 21/SC1 Handmade Paper
Handmade Paper – Specification for cards DPNS 2051:20XX New Circulation BPS TC 21/SC1 Handmade Paper
Pallets for materials handling -- Vocabulary ISO 445:2013 Revision Circulation 55.180.20; 01.040.55 BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Pallets for materials handling -- Flat pallets -- Part 1: Test methods ISO 8611-1:2011 Revision Deliberation 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Pallets for materials handling -- Flat pallets -- Part 2: Performance
requirements and selection of tests ISO 8611-2:2011 & Amd. 01:2016 Revision Deliberation 55.180.20
BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Pallets for materials handling -- Flat pallets -- Part 3: Maximum working
loads ISO 8611-3:2011 Revision Deliberation 55.180.20
BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Pallets for materials handling -- Flat pallets -- Part 4: Procedure for
predicting creep responses in stiffness tests for plastic pallets using
regression analyses
ISO/TS 8611-4:2013 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Pallets -- Slip sheets ISO 12776:2008 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Methods of test for pallet joints -- Part 1: Determination of bending
resistance of pallet nails, other dowel-type fasteners and staplesISO 12777-1:1994 & Amd. 01:2008 New Preparatory 55.180.20
BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Methods of test for pallet joints -- Part 2: Determination of withdrawal
and head pull-through resistance of pallet nails and staples ISO 12777-2:2000 New Preparatory 55.180.20
BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Methods of test for pallet joints -- Part 3: Determination of strength of
pallet jointsISO 12777-3:2002 New Preparatory 55.180.20
BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Box pallets -- Principal requirements and test method ISO 13194:2011 New Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material
Handling
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Pallets for materials handling -- Quality of fasteners for assembly of new
and repair of used, flat, wooden pallets ISO 15629:2002 New Preparatory 55.180.20
BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Pallets for materials handling -- Quality of new wooden components for
flat pallets ISO 18333:2014 New Preparatory 55.180.20
BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Pallets for materials handling -- Quality of assembly of new wooden
palletsISO 18334:2010 New Preparatory 55.180.20
BPS/TC 66 Pallets for Unit Load Method of Material
Handling
Pallets for materials handling -- Repair of flat wooden pallets ISO 18613:2014 Revision Preparatory 55.180.20 BPS/TC 66 Pallets for Unit Load Method of Material
HandlingFurniture -- Children's cots and folding cots for domestic use -- Part 1:
Safety requirementsISO 7175-1:2019 Revision Circulation 97.14 BPS/TC 41 Furniture
Furniture -- Children's cots and folding cots for domestic use -- Part 2:
Test methodsISO 7175-2:2019 Revision Circulation 97.14 BPS/TC 41 Furniture
Office furniture - Work tables - Part 2: Safety, strength and durability
requirementsEN 527-2:2016 New Drafting/Deliberation 97.14 BPS/TC 41 Furniture
Furniture – Strength, durability and safety – Requirements for non-
domestic tablesEN 15372:2016 New Drafting/Deliberation 97.14 BPS/TC 41 Furniture
Furniture – Chairs and tables for educational institutions – Functional
sizesPNS ISO 5970:2007 (ISO published 1979) Revision Drafting/Deliberation 97.14 BPS/TC 41 Furniture
Furniture - Chairs and tables for educational institutions - Part 2: Safety
requirements and test methods PNS BS EN 1729-2:2011
(BS EN published 2006) Revision Drafting/Deliberation 97.14 BPS/TC 41 Furniture
Non-domestic storage furniture - Requirements for safety, strength,
durability and stabilityEN 16121:2013 +A1:2017 New Drafting/Deliberation 97.14 BPS/TC 41 Furniture
Domestic and non-domestic storage furniture – Test methods for the
determination of strength, durability and stabilityEN 16122:2012 New Drafting/Deliberation 97.14 BPS/TC 41 Furniture
Furniture – Storage units – Determination of stability
PNS ISO 7171:2012
(ISO published 1988)Revision Drafting/Deliberation 97.14 BPS/TC 41 Furniture
Furniture -- Beds -- Test methods for the determination of stability,
strength and durabilityAddendum 1 for PNS ISO 19833:2018 New Drafting/Deliberation 97.14 BPS/TC 41 Furniture
Pneumatic tubes for motorcycles – Specification PNS 34-1:2019 Revision Approval 83.160.10 BPS/TC 16 Rubber and Rubber-based Products
Pneumatic tubes for automotive vehicles – Requirements and test
methodsISO 17464:2016 Revision Circulation 83.160.01 BPS/TC 16 Rubber and Rubber-based Products
Pneumatic tubes for bicycles – Specification DPNS 34-2:2019 Revision Drafting/Deliberation 83.160.10 BPS/TC 16 Rubber and Rubber-based Products
Rubber -- Measurement of vulcanization characteristics using
curemeters -- Part 1: IntroductionPNS ISO 6502:2014 (ISO published 1999) Revision Drafting/Deliberation 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber -- Measurement of vulcanization characteristics using
curemeters -- Part 2: Oscillating disc curemeterISO 6502-2:2018 New Drafting/Deliberation 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber -- Measurement of vulcanization characteristics using
curemeters -- Part 3: Rotorless curemeterISO 6502-3:2018 New Drafting/Deliberation 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction
and guidePNS ISO 18517:2013 (ISO published 2005) Revision Drafting/Deliberation 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber, vulcanized or thermoplastic -- Determination of hardness
(hardness between 10 IRHD and 100 IRHD)PNS ISO 48:2010 (ISO published 2007) Revision Drafting/Deliberation 83.06 BPS/TC 16 Rubber and Rubber-based Products
Bicycle tyres and rims -- Part 1: Tyre designations and dimensionsPNS ISO 5775-1:2007 (ISO published 1997) Revision Drafting/Deliberation 83.160.10 BPS/TC 16 Rubber and Rubber-based Products
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat
resistance testsPNS ISO 188:2012 (ISO published 1998) Revision Drafting/Deliberation 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber, vulcanized -- Preformed joint seals for use between concrete
paving sections of highways -- SpecificationISO 4635:2011 New Drafting/Deliberation 83.140.50; 91.100.50 BPS/TC 16 Rubber and Rubber-based Products
Rubber, unvulcanized -- Determinations using a shearing-disc
viscometer -- Part 1: Determination of Mooney viscosityISO 289-2:2016 New Organization Meeting 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber -- Determination of metal content by atomic absorption
spectrometry -- Part 3: Determination of copper contentPNS ISO 6101-3:2014 (ISO published 1997) Revision Organization Meeting 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber -- Determination of metal content by atomic absorption
spectrometry -- Part 4: Determination of manganese contentPNS ISO 6101-4:2014 (ISO published 1997) Revision Organization Meeting 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber -- Determination of ash PNS ISO 247:2015 (ISO published 2006) Revision Organization Meeting 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber -- Determination of magnesium content of field and concentrated
natural rubber latex by titrationPNS ISO 11852:2014 (ISO published 2011) Revision Organization Meeting 83.040.10 BPS/TC 16 Rubber and Rubber-based Products
Rubber, raw natural -- Colour index test PNS ISO 4660:2015 (ISO published 2011) Revision Organization Meeting 83.040.10 BPS/TC 16 Rubber and Rubber-based Products
Natural rubber latex concentrate -- Centrifuged or creamed, ammonia-
preserved types -- SpecificationsPNS ISO 2004:2000 (ISO published 1997) Revision Organization Meeting 83.040.10 BPS/TC 16 Rubber and Rubber-based Products
Rubber, natural latex concentrate -- Determination of KOH numberPNS ISO 127:2013 (ISO published 2012) Revision Organization Meeting 83.040.10 BPS/TC 16 Rubber and Rubber-based Products
Rubber latex, natural, concentrate -- Determination of volatile fatty acid
numberPNS ISO 506:2013 (ISO published 1992) Reconfirmation Organization Meeting 83.040.10 BPS/TC 16 Rubber and Rubber-based Products
Natural rubber latex concentrate -- Determination of alkalinity PNS ISO 125:2012 (ISO published 2011) Reconfirmation Organization Meeting 83.040.10 BPS/TC 16 Rubber and Rubber-based Products
Rubber latex -- Determination of coagulum content (sieve residue)PNS ISO 706:2013 (ISO published 2004) Reconfirmation Organization Meeting 83.040.10 BPS/TC 16 Rubber and Rubber-based Products
Natural rubber latex concentrate -- Determination of boric acid contentPNS ISO 1802:2013 (ISO published 1992) Reconfirmation Organization Meeting 83.040.10 BPS/TC 16 Rubber and Rubber-based Products
Rubber and plastics inlet hoses and hose assemblies for washing-
machines and dishwashers – SpecificationISO 6804:2016 New Preparatory 97.060; 97.040.40; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products
Conductive and dissipative rubbers, vulcanized or thermoplastics -
Measurement or resistivityPNS ISO 1853:2000 (ISO published 1998) Revision Preparatory 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber and plastics hoses and hose assemblies -- Guidelines for
selection, storage, use and maintenancePNS ISO 8331: 2004 (ISO published 1991) Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products
Rubber, vulcanized or thermoplastic -- Determination of tension set
under constant elongation, and of tension set, elongation and creep
under constant tensile load
PNS ISO 2285: 2010 (ISO published 2007) Revision Preparatory 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber and plastics hoses and tubing -- Determination of transmission
of liquids through hose and tubing wallsPNS ISO 8308:2015 (ISO published 2006) Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products
Rubber -- Antistatic and conductive products -- Determination of
electrical resistancePNS ISO 2878:2004 (ISO published 1987) Revision Preparatory 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber and plastics hoses -- Method of test for flammability PNS ISO 8030:2012 (ISO published 1995) Revision Preparatory 23.040.70;13.220.40 BPS/TC 16 Rubber and Rubber-based Products
Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking --
Part 1: Static and dynamic strain testingPNS ISO 1431-1:2007 (ISO published 2004) Revision Preparatory 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber, vulcanized or thermoplastic -- Determination of shear modulus
and adhesion to rigid plates -- Quadruple-shear methods
PNS ISO 1827:2007 (ISO published 2007) Revision Preparatory 83.06 BPS/TC 16 Rubber and Rubber-based Products
Rubber or plastics hoses and hose assemblies -- Hydraulic-pressure
impulse test without flexingPNS ISO 6803:2006 (ISO published 1994) Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Rubber hoses and hose assemblies for measured fuel dispensing --
SpecificationPNS ISO 5772:2012 (ISO published 1998) Revision Preparatory 75.200; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products
Rubber hoses and hose assemblies for water suction and discharge --
SpecificationPNS ISO 4641:2012 (ISO published 2010) Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products
Rubber and plastics hoses, non-collapsible, for fire-fighting service --
Part 1: Semi-rigid hoses for fixed systemsPNS ISO 4642-1:2011 (ISO published 2009) Revision Preparatory 83.140.40; 13.220.10 BPS/TC 16 Rubber and Rubber-based Products
Rubber and plastics hoses, non-collapsible, for fire-fighting service --
Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
PNS ISO 4642-2:2011 (ISO published 2009 Revision Preparatory 13.220.10; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products
Rubber hoses, textile-reinforced, for compressed air – SpecificationPNS ISO 2398:2012 (ISO published 2006) Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products
Rubber hoses and tubing for cooling systems for internal-combustion
engines -- SpecificationPNS ISO 4081:2012 (ISO published 2010) Revision Preparatory 43.040.01; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products
Rubber hoses and tubing for air and vacuum systems for internal-
combustion engines -- SpecificationPNS ISO 11424:2012 (ISO published 1996) Revision Preparatory 27.020; 83.140.30; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products
Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic
types for oil-based or water-based fluids -- SpecificationPNS ISO 1436-1:2005 (ISO published 2001) Revision Preparatory 83.140.40; 23.100.40 BPS/TC 16 Rubber and Rubber-based Products
Rubber hose and hose assemblies for oil suction and discharge service --
SpecificationPNS ISO 1823:2005 (ISO published 1997) Revision Preparatory 75.200; 83.140.40 BPS/TC 16 Rubber and Rubber-based Products
Rubber hoses and hose assemblies for saturated steam – SpecificationPNS ISO 6134:2005 (ISO published 2005) Revision Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products
Rubber hoses and hose assemblies for liquefied petroleum gas in motor
vehicles -- SpecificationPNS ISO 8789:2012 (ISO published 2009) Revision Preparatory 83.140.40; 43.060.40 BPS/TC 16 Rubber and Rubber-based Products
Rubber hoses and hose assemblies for automobile power-steering
systems -- SpecificationPNS ISO 11425:2012 (ISO published 1996) Revision Preparatory 83.140.40; 43.040.50 BPS/TC 16 Rubber and Rubber-based Products
Rubber hoses, textile-reinforced, for general-purpose water applications --
SpecificationPNS ISO 1403:2013 (ISO published 2005) Reconfirmation Preparatory 23.040.70 BPS/TC 16 Rubber and Rubber-based Products
Chain of custody of wood and woodbased products PNS ISO 38200:2019 New Approval 79.02 BPS/TC 78 Forest and Forest Products
Chain of Custody of Forest Based Products – Requirements DPNS 2127:2019 New Finalization 79.02 BPS/TC 78 Forest and Forest Products
Sustainable Forest Management DPNS 2140:2019 New Drafting/Deliberation 13.020.10, 03.100.70 BPS/TC 78 Forest and Forest Products
Electric wires and cables – Soft drawn (annealed) copper stranded
conductors for electrical purposes – SpecificationPNS 1207:2006 Revision Drafting/Deliberation 29.06 BPS/TC 1 Electrical Wires and Cables
Electric wires and cables – Neutral supported secondary distribution and
service drop aluminum cables rated 600 volts – SpecificationsPNS 2079:2004 Revision Drafting/Deliberation 29.060.01 BPS/TC 1 Electrical Wires and Cables
Electric wires and cables – Annealed copper wires – Specification PNS 260:2004 Revision Preparatory 71.100.40 BPS/TC 1 Electrical Wires and Cables
Plasticized polyvinyl chloride compounds for electrical insulation –
SpecificationPNS 661:2009 Revision Preparatory 29.035.20 BPS/TC 1 Electrical Wires and Cables
Electric wires and cables - Thermoplastic-insulated copper wires and
cables rated 600 volts - Part 1: General specificationsPNS 35-1/AMD1:2009 Revision [Amendment] Drafting/Deliberation 29.06 BPS/TC 1 Electrical Wires and Cables
Electric wires and cables – Thermoplastic insulated copper wires and
cables rated 600 volts – Part 2: Non-metallic flat jacketed electric wires
– Specification
PNS 35-2 Revision Drafting/Deliberation 29.06 BPS/TC 1 Electrical Wires and Cables
Electric wires and cables – Copper and aluminum conductors for
electrical purposes – Test methodsPNS 1088:2006 Revision Preparatory 29.06 BPS/TC 1 Electrical Wires and Cables
ELECTROTECHNICAL PRODUCTS
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Standard Specification for Soft or Annealed Copper Wire ASTM B3 New Published 29.06 BPS/TC 1 Electrical Wires and Cables
Concentric-Lay-Stranded Copper Conductor ASTM B8 New Published 29.06 BPS/TC 1 Electrical Wires and Cables
19 Wire Combination Unilay-Stranded-Copper Conductor ASTM B787 New Published 29.06 BPS/TC 1 Electrical Wires and Cables
Compressed Round Stranded Copper Conductor ASTM B902 New Published 29.06 BPS/TC 1 Electrical Wires and Cables
Compact Round Concentric-Lay-Stranded Copper Conductor ASTM B496 New Published 29.06 BPS/TC 1 Electrical Wires and Cables
Standard Terminology Relating to Uninsulated Metallic Electrical
ConductorsASTM B354 New Circulation 29.06 BPS/TC 1 Electrical Wires and Cables
Single-capped flourescent lamps - safety requirements IEC 61199:2014 Revision (Amendment) Circulation 29.140.30 BPS/TC 4 Lamps and Related Equipment
Safety specifications for incandescent lamps - Part 1: Tungsten filament
lamps for domestic and similar general lighting purposesIEC 60432-1:2011 Revision (Amendment) Preparatory 29.140.20 BPS/TC 4 Lamps and Related Equipment
Glow-starters for flourescent lamps IEC 60155:1993/AMD.2:2006 Revision (Amendment) Preparatory 29.140.30 BPS/TC 4 Lamps and Related Equipment
GX16t-5 capped tubular LED lamp - Safety specifications IEC 62931:2017 New Preparatory 29.140.10 BPS/TC 4 Lamps and Related Equipment
LED modules for general lighting - Safety specifications IEC 62031:2018 Revision Preparatory 29.140.10 BPS/TC 4 Lamps and Related Equipment
Luminaires- Part 2-22: Particular requirements – Luminaires for
emergency lightingIEC 60598-2-22:2014+AMD1:2017 Revision (Amendment) Preparatory 29.140.40 BPS/TC 4 Lamps and Related Equipment
Luminaires – Part 2-20: Particular requirements – Lighting chains IEC 598-2-20:2014 Revision Preparatory 29.140.40 BPS/TC 4 Lamps and Related Equipment
Luminaires – Part 2-21: Particular requirements – Rope lights IEC 598-2-21:2014 Revision Preparatory 29.140.40 BPS/TC 4 Lamps and Related Equipment
Luminaires-Part 2-12: Particular requirements – Mains socket- outlet
mounted night lightIEC 60598-2-12:2013 Revision Preparatory 29.140.40 BPS/TC 4 Lamps and Related Equipment
Self-ballasted LED lamps for general lighting service with supply voltage
>50V- Performance requirementsIEC 62612:2018 Revision Preparatory 29.140.01 BPS/TC 4 Lamps and Related Equipment
Luminaire performance – Part 2-1: Particular requirements for LED
luminairesIEC 62722-2-1:2014 New Preparatory 29.140.40 BPS/TC 4 Lamps and Related Equipment
Plugs and socket-outlets for household and similar purposes - Part 2-5:
Particular requirements for adaptorsIEC 60884-2-5:2017 New Preparatory 29.120.30
BPS/TC 10 Electrical Wiring Devices/WG 1 - Plugs and
Socket-Outlets
Plugs and socket-outlets for household and similar purposes - Part 2-2:
Particular requirements for socket-outlets for appliancesIEC 60884-2-2:2006 New Preparatory 29.120.30
BPS/TC 10 Electrical Wiring Devices/WG 1 - Plugs and
Socket-Outlets
IEC system of plugs and socket-outlets for household and similar
purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.IEC 60906-1:2009 New Preparatory 29.120.30
BPS/TC 10 Electrical Wiring Devices/WG 1 - Plugs and
Socket-Outlets
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers IEC 60947-2:2016 Revision Drafting/Deliberation 29.130.20BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit
Breakers
Low-voltage switchgear and controlgear - Part 1: General Requirements IEC 60947-1:2007+AMD1:2010+AMD2:2014 Revision Drafting/Deliberation 29.120.50BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit
Breakers
Circuit-breakers for overcurrent protection for household and similar
installations - Part 2: Circuit-breakers for a.c. and d.c. operationIEC 60898-2:2016 Revision Preparatory 29.120.50
BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit
Breakers
Residual current operated circuit-breakers with integral overcurrent
protection for household and similar uses (RCBOs) - Part 1: General
rules
IEC 61009-1 New (Amendment) Preparatory 29.020; 29.120.50; 33.100.10BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit
Breakers
General requirements for arc fault detection devices IEC 62606:2013+AMD1:2017 New (Amendment) Preparatory 29.120.50BPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit
Breakers
General requirements for residual current operated protective devices IEC 60755:2017 New PreparatoryBPS/TC 10 Electrical Wiring Devices/WG 2 - Circuit
Breakers
Switches for household and similar fixed electrical installations - Part 2-
1: Particular requirements - Electronic switchesIEC 60669-2-1:2002 +AMD1:2008+AMD2:2015 Revision (Amendment) Preparatory 29.120.40 BPS/TC 10 Electrical Wiring Devices/WG 6 - Switches
(Continuation) Switches for household and similar fixed-electrical
installations - Part 1: General requirementsIEC 60669-1:2017 Revision Drafting/Deliberation 29.120.40 BPS/TC 10 Electrical Wiring Devices/WG 6 - Switches
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Household and similar electrical appliances – Safety – Part 2-9:
Particular requirements for grills, toasters and similar portable cooking
appliances
PNS IEC 60335-2-9:2019 Revision Published 13.120; 97.040.20BPS/TC 23/30 Household, Cooking and Heating
Appliances
Household and similar electrical appliances - Safety - Part 2-75:
Particular requirements for commercial dispensing appliances and
vending machines
PNS IEC 60335-2-75:2011 Revision Organization Meeting 55.23BPS/TC 23/30 Household, Cooking and Heating
Appliances
Household and similar electrical appliances - Safety - Part 2-88:
Particular requirements for humidifiers intended for use with heating,
ventilation, or air-conditioning systems
PNS IEC 60335-2-88:2011 Reconfirmation Organization Meeting 91.140.30BPS/TC 23/30 Household, Cooking and Heating
Appliances
Safety of household and similar electrical appliances - Part 2-59:
Particular requirement for insect killersPNS IEC 60335-2-59:1998 Revision Finalization 13.120; 97.180
BPS/TC 23/30 Household, Cooking and Heating
Appliances
Safety of household and similar electrical appliances - Part 65: Particular
requirements for air-cleaning appliancesPNS IEC 60335-2-65:2002 Revision Finalization 23.12
BPS/TC 23/30 Household, Cooking and Heating
Appliances
Safety of household and similar electrical appliances - Part 2-2:
Particular requirements for vacuum cleaners and water suction cleaning
appliances
PNS IEC 60335-2-2:1993 Revision Circulation 13.120; 97.080BPS/TC 23/30 Household, Cooking and Heating
Appliances
Household and similar electrical appliances - Safety - Part 2-89:
Particular requirements for commercial refrigerating appliances with an
incorporated or remote refrigerant unit or compressor
PNS IEC 60335-2-89:2011 Revision Circulation 97.130.20BPS/TC 23/30 Household, Cooking and Heating
Appliances
Household and similar electrical appliances - Safety - Part 2-11:
Particular requirements for tumble dryersPNS IEC 60335-2-11:2011 Revision Drafting/Deliberation 13.120; 97.060
BPS/TC 23/30 Household, Cooking and Heating
Appliances
Electric water dispensing appliances DPNS XXXX:20XX New Drafting/Deliberation 55.23BPS/TC 23/30 Household, Cooking and Heating
Appliances
Safety of household and similar electrical appliances - Part 2-34:
Particular requirements for motor-compressorsPNS IEC 60335-2-34:2001 Revision Organization Meeting 97.040.30
BPS/TC 23/30 Household, Cooking and Heating
Appliances
Household and similar electrical appliances - Safety - Part 2-36:
Particular requirements for commercial electric cooking ranges, ovens,
hobs and hob elements
PNS IEC 60335-2-36:2011 Revision Organization Meeting 97.040.20BPS/TC 23/30 Household, Cooking and Heating
Appliances
Safety of household and similar electrical appliances - Part 2-6:
Particular requirements for stationary cooking ranges, hobs, ovens and
similar appliances
PNS IEC 60335-2-6:2005 Revision Organization Meeting 97.040.20BPS/TC 23/30 Household, Cooking and Heating
Appliances
Household and similar electrical appliances - Safety - Part 2-98:
Particular requirements for humidifiersPNS IEC 60335-2-98:2011 Reconfirmation Organization Meeting 97.03
BPS/TC 23/30 Household, Cooking and Heating
Appliances
Safety of household and similar electrical appliances - Part 2-104:
Particular requirements for appliances to recover and/or recycle
refrigerant from air conditioning and refrigeration equipment
PNS IEC 60335-2-104:2006 Reconfirmation Organization Meeting 27.200; 71.100.45BPS/TC 23/30 Household, Cooking and Heating
Appliances
Safety of household and similar electrical appliances - Part 32: Particular
requirements for massage appliancesPNS IEC 60335-2-32:2000 Revision Organization Meeting 13.120; 97.170
BPS/TC 23/30 Household, Cooking and Heating
Appliances
Switches for household and similar fixed electrical installations - Part 2-
5: Particular requirements - Switches and related accessories for use in
home and building electronic systems (HBES)
IEC 60669-2-5:2013 New Preparatory 29.120.40BPS/TC 23/30 Household, Cooking and Heating
Appliances
Methods of measurement on receivers for television - Part 7:
HDTVdisplays IEC 60107-7:1997 New Published 33.160.25
BPS/TC 59 Audio, Video and Multimedia Systems and
Equipment
Safety of primary and secondary lithium cells and batteries during
transport IEC 62281:2016 New Published 29.220.10
BPS/TC 59 Audio, Video and Multimedia Systems and
Equipment
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Audio, video and similar electronic apparatus - Safety requirementsPNS IEC 60065:2013
(IEC published 2011)Revision Circulation 97.020
BPS/TC 59 Audio, Video and Multimedia Systems and
Equipment
Secondary cells and batteries containing alkaline or other non-acid
electrolytes - Safety requirements for portable sealed secondary cells,
and for batteries made from them, for use in portable applications
PNS IEC 62133:2015
(IEC published 2012)Revision Circulation 29.220.30
BPS/TC 59 Audio, Video and Multimedia Systems and
Equipment
Methods of measurement for the power consumption of audio, video and
related equipment
PNS IEC 62087:2012
(IEC published 2011)Revision Organization Meeting 3.160.01
BPS/TC 59 Audio, Video and Multimedia Systems and
Equipment
PNS 1999 Peak music power output -- Method of Measurement PNS 1999:2002 Revision Deliberation 33.160.01BPS/TC 59 Audio, Video and Multimedia Systems and
Equipment
Audio video and related equipment – Energy efficiency factor (EEF) and
labeling Requirements – Part 1: Television setPNS 2098-1:2013 Revision Preparatory 33.160.25
BPS/TC 59 Audio, Video and Multimedia Systems and
Equipment
Television Receivers and Video Monitors – Viewing Screen Dimensions
– Method of MeasurementPNS 378:2000 Revision Preparatory 33.160.25
BPS/TC 59 Audio, Video and Multimedia Systems and
Equipment
Interoperability specifications of common external power supply (EPS)
for use with data-enabled mobile telephonesIEC 62684:2018 New Preparatory 33.160.01
BPS/TC 59 Audio, Video and Multimedia Systems and
Equipment
Rotating electrical machines - Part 6: Methods of cooling (IC Code) IEC 60034-6:1991 New Published 29.160.01 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 11: Thermal protection IEC 60034-11:2004 New Finalization 29.160.01 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 18-1: Functional evaluation of
insulation systems - General guidelinesIEC 60034-18-1:2010 New Organization Meeting 29.160.02 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 18-21: Functional evaluation of
insulation systems - Test procedures for wire-wound windings - Thermal
evaluation and classification
IEC 60034-18-21:2012 New Organization Meeting 29.160.03 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 18-41: Partial discharge free
electrical insulation systems (Type I) used in rotating electrical machines
fed from voltage converters - Qualification and quality control tests
IEC 60034-18-41:2014 New Organization Meeting 29.160.04 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 18-42: Partial discharge resistant
electrical insulation systems (Type II) used in rotating electrical
machines fed from voltage converters - Qualification tests
IEC 60034-18-42:2017 New Organization Meeting 29.160.05 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 18-31: Functional evaluation of
insulation systems - Test procedures for form-wound windings - Thermal
evaluation and classification of insulation systems used in rotating
machines
IEC 60034-18-31:2012 New Organization Meeting 29.160.06 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 18-32: Functional evaluation of
insulation systems - Test procedures for form-wound windings -
Evaluation by electrical endurance
IEC 60034-18-32:2010 New Organization Meeting 29.160.07 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 18-33: Functional evaluation of
insulation systems - Test procedures for form-wound windings -
Multifactor evaluation by endurance under simultaneous thermal and
electrical stresses
IEC TS 60034-18-33:2010 New Organization Meeting 29.160.08 BPS/TC 58 Rotating Machinery
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Rotating electrical machines - Part 18-34: Functional evaluation of
insulation systems - Test procedures for form-wound windings -
Evaluation of thermomechanical endurance of insulation systems
IEC 60034-18-34:2012 New Organization Meeting 29.160.09 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 14: Mechanical vibration of certain
machines with shaft heights 56 mm and higher - Measurement,
evaluation and limits of vibration severity
IEC 60034-14:2003/AMD1:2007 New (Amendment) Organization Meeting 29.160.01 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 15: Impulse voltage withstand levels
of form-wound stator coils for rotating a.c. machinesIEC 60034-15:2009 New Organization Meeting 29.160.01 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 19: Specific test methods for d.c.
machines on conventional and rectifier-fed suppliesIEC 60034-19:2014 New Organization Meeting 29.160.01 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 28: Test methods for determining
quantities of equivalent circuit diagrams for three-phase low-voltage
cage induction motors
IEC 60034-28:2012 New Organization Meeting 29.160.01 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 23: Specification for the refurbishing
of rotating electrical machinesIEC 60034-23:2003 New Organization Meeting 29.160.01 BPS/TC 58 Rotating Machinery
Rotating electrical machines - Part 16-1: Excitation systems for
synchronous machines - DefinitionsIEC 60334-16-1:2011 New Organization Meeting 29.160.01 BPS/TC 58 Rotating Machinery
Power transformers – Part 1: General DPNS IEC 60076-1:20XX (IEC pub. 2011) Revision Finalization 29.180 BPS/TC 69 Power Transformer
Power transformers - Part 5: Ability to withstand short circuit PNS IEC 60076-5:2006 Revision Organization Meeting 29.180 BPS/TC 69 Power Transformer
Power transformers - Part 20: Energy efficiency IEC TS 60076-20:2017 New Organization Meeting 29.180 BPS/TC 69 Power Transformer
Power transformers - Part 7: Loading guide for oil-immersed power
transformersIEC 60076-7:2005 New Organization Meeting 29.180 BPS/TC 69 Power Transformer
Power transformers - Part 11: Dry-type transformers IEC 60076-11:2004 New Organization Meeting 29.180 BPS/TC 69 Power Transformer
Power transformers - Part 12: Loading guide for dry-type power
transformersIEC 60076-12:2008 New Organization Meeting 29.180 BPS/TC 69 Power Transformer
Power transformers - Part 13: Self-protected liquid-filled transformers IEC 60076-13:2006 New Organization Meeting 29.180 BPS/TC 69 Power Transformer
Power transformers - Part 14: Liquid-immersed power transformers
using high-temperature insulation materialsIEC 60076-14:2013 New Organization Meeting 29.180 BPS/TC 69 Power Transformer
Power transformers - Part 21: Standard requirements, terminology, and
test code for step-voltage regulatorsIEC 60076-21:2011 New Organization Meeting 29.180 BPS/TC 69 Power Transformer
Low voltage electrical installations - Part 4-41: Protection for safety -
Protection against electric shockIEC 60364-4-41:2005+AMD1:2017/COR1:2018 [New](Corrigendum) Preparatory 13.260; 91.140.50
BPS/TC 77 Electrical Installation and Protection Against
Electric Shock
Low-voltage electrical installations - Part 4-42: Protection forsafety -
Protection against thermal effectsIEC 60364-4-42:2010+AMD1:2014 [New](Amendment) Preparatory 13.260; 91.140.50
BPS/TC 77 Electrical Installation and Protection Against
Electric Shock
Low-voltage electrical installations - Part 4-43: Protection for safety -
Protection against overcurrentIEC 60364-4-43:2008 New Preparatory 13.260; 91.140.50
BPS/TC 77 Electrical Installation and Protection Against
Electric Shock
Low-voltage electrical installations - Part 4-44: Protection for safety -
Protection against voltage disturbances and electromagnetic
disturbances
IEC 60364-4-
44:2007+AMD1:2015+AMD2:2018[New](Amendment) Preparatory 13.260; 91.140.50
BPS/TC 77 Electrical Installation and Protection Against
Electric Shock
Methods of measurement of the suppression characteristics of passive
EMC filtering devicesIEC CISPR 17:2011 New Published 33.100.01 BPS/TC 74 Electomagnetic Compatibility
Specification for radio disturbance and immunity measuring apparatus
and methods - Part 1-1: Radio disturbance and immunity measuring
apparatus - Measuring apparatus
IEC CISPR 16-1-1:2015 New Published 33.100.10 BPS/TC 74 Electomagnetic Compatibility
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Specification for radio disturbance and immunity measuring apparatus
and methods - Part 2-1: Methods of measurement of disturbances and
immunity - Conducted disturbance measurements
IEC CISPR 16-2-1:2014 with Amendment
1:2017New Published 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility
Vehicles, boats and internal combustion engines - Radio disturbance
characteristics - Limits and methods of measurement for the protection
of on-board receivers
IEC CISPR 25:2016 New Published 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility
Specification for radio disturbance and immunity measuring apparatus
and methods - Part 4-1: Uncertainties, statistics and limit modelling -
Uncertainties in standardized EMC tests
IEC CISPR/TR 16-4-1:2009 New Finalization 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility
Specification for radio disturbance and immunity measuring apparatus
and methods - Part 4-2: Uncertainties, statistics and limit modelling -
Measurement instrumentation uncertainty
IEC CISPR 16-4-
2:2011+AMD1:2014+AMD2:2018 CSV New Deliberation 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility
Specification for radio disturbance and immunity measuring apparatus
and methods - Part 4-3: Uncertainties, statistics and limit modelling -
Statistical considerations in the determination of EMC compliance of
mass-produced product
IEC CISPR TR 16-4-3:2004+AMD1:2006 CSV New Finalization 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility
Specification for radio disturbance and immunity measuring apparatus
and methods - Part 4-4: Uncertainties, statistics and limit modelling -
Statistics of complaints and a model for the calculation of limits for the
protection of radio services calculation of limits for the protection of radio
services
IEC CISPR TR 16-4-4:2007+AMD1:2017 CSV New Finalization 33.100.10; 33.100.20 BPS/TC 74 Electomagnetic Compatibility
Electromagnetic compatibility of multimedia equipment – Emission
requirements
PNS IEC CISPR 13:2012 (IEC pub 2009) PNS
IEC CISPR 22:2012 (IEC pub 2008)Revision Deliberation 33.100.10 BPS/TC 74 Electomagnetic Compatibility
Electromagnetic compatibility (EMC) - Part 4-8: Testing and
measurement techniques - Power frequency magnetic field immunity
test
IEC 61000-4-8:2009 New Finalization 33.100.20 BPS/TC 74 Electomagnetic Compatibility
Electromagnetic Compatibility (EMC) - Part 4-12: Testing and
measurement techniques - Ring wave immunity testIEC 61000-4-12:2017 New Finalization 33.100.20 BPS/TC 74 Electomagnetic Compatibility
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for
harmonic current emissions (equipment input current ≤16 A per phase)PNS IEC 61000-3-2:2011 (IEC pub 2009) Revision Preparatory 33.100.10 BPS/TC 74 Electomagnetic Compatibility
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards -
Immunity for residential, commercial and light-industrial environmentsPNS IEC 61000-6-1:2011 (IEC pub 2005) Revision Preparatory 33.100.20 BPS/TC 74 Electomagnetic Compatibility
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards -
Immunity for industrial environmentsPNS IEC 61000-6-2:2012 (IEC pub 2005) Revision Preparatory 33.100.20 BPS/TC 74 Electomagnetic Compatibility
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environmentsPNS IEC 61000-6-4:2012 (IEC pub 2006) Revision Preparatory 33.100.10 BPS/TC 74 Electomagnetic Compatibility
Limits and methods of measurement of radio disturbance characteristics
of electrical lighting and similar equipmentPNS IEC CISPR 15:2011 (IEC pub 2009) Revision Preparatory 33.100.10 BPS/TC 74 Electomagnetic Compatibility
Electromagnetic compatibility (EMC) - Part 4-20: Testing and
measurement techniques - Emission and immunity testing in transverse
electromagnetic (TEM) waveguides
IEC 61000-4-20:2010 New Preparatory33.100.10
33.100.20 BPS/TC 74 Electomagnetic Compatibility
Electromagnetic compatibility (EMC) - Part 4-21: Testing and
measurement techniques - Reverberation chamber test methodsIEC 61000-4-21:2011 New Preparatory
33.100.10
33.100.20 BPS/TC 74 Electomagnetic Compatibility
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Electromagnetic compatibility (EMC) - Part 4-22: Testing and
measurement techniques - Radiated emissions and immunity
measurements in fully anechoic rooms (FARs)
IEC 61000-4-22:2010 New Preparatory33.100.10
33.100.20 BPS/TC 74 Electomagnetic Compatibility
Arc welding equipment - Part 10: Electromagnetic compatibility
(EMC)requirementsIEC 60974-10:2014+AMD1:2015 New Preparatory 25.160.30 BPS/TC 74 Electomagnetic Compatibility
Resistance welding equipment - Part 2: Electromagnetic compatibility
(EMC) requirementsIEC 62135-2:2015 New Preparatory 25.160.30 BPS/TC 74 Electomagnetic Compatibility
BPS/TC 60/ SC 1 IT Security techniques priority standards ISO/IEC JTC 1/SC 27 IT Security techniques New/Revision Preparatory 35.030 BPS/TC 60 Information Technology
BPS/TC 60/ SC 2 IT for learning, education and training priority
standards
ISO/IEC JTC 1/SC 36 Information technology
for learning, education and training New/Revision Preparatory 35.240.90 BPS/TC 60 Information Technology
BPS/TC 60/ SC 3 Software and systems engineering and IT Service
Management and IT Governance priority standards
ISO/IEC JTC 1/SC 7 Software and systems
engineering and ISO/IEC JTC 1/SC 40 IT
Service Management and IT Governance
New/Revision Preparatory 35.080; 35.020; 03.080.99 BPS/TC 60 Information Technology
Information technology – Security techniques – Privacy frameworkISO/IEC 29100: 2011 with Amendment 1:2018
(adoption)New Finalization 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology — Security techniques — Information security
management — Monitoring, measurement, analysis and evaluation
PNS ISO/IEC 27004:2015 (ISO/IEC published
2009)Revision Finalization 03.100.70; 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology — Security techniques — Guidelines for
information security management systems auditing
PNS ISO/IEC 27007:2015 (ISO published
2011)Revision Finalization 03.100.70; 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology — Security techniques — Information security
management for inter-sector and inter-organizational communications
PNS ISO/IEC 27010:2015 (ISO published
2012)Revision Finalization 03.100.70; 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology — Security techniques — Code of practice for
Information security controls based on ISO/IEC 27002 for
telecommunications organizations
PNS ISO/IEC 27011:2011 (ISO published
2008)Revision Finalization 03.100.70; 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology – Security techniques – Information security
management systems – Overview and vocabulary
PNS ISO/IEC 27000:2016 (ISO published
2016)Revision Circulation 01.040.35; 03.100.70; 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology – Security techniques – Information security
controls for the energy utility industryISO/IEC 27019:2017 New Circulation 03.100.70
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology – Security techniques – Competence
requirements for information security management systems
professionals
ISO/IEC 27021:2017 New Circulation 03.100.70; 35.030 BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Privacy enhancing data de-identification terminology and classification of
techniquesISO/IEC 20889:2018 New Circulation 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology – Security techniques – Network security – Part
6: Securing wireless IP network accessISO/IEC 27033-6:2016 New Circulation 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology – Security techniques – Guidance on assuring
suitability and adequacy of incident investigative methodISO/IEC 27041:2015 New Circulation 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Guidelines for the
analysis and interpretation of digital evidenceISO/IEC 27042:2015 New Organization Meeting 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Authentication context
for biometrics
ISO/IEC 24761:2009 with
Corrigendum 1:2013New Organization Meeting 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Information technology -- Security techniques -- Security assessment of
operational systemsISO/IEC TR 19791:2010 New Organization Meeting 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Security evaluation of
biometricsISO/IEC 19792:2009 New Organization Meeting 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Anonymous digital
signatures -- Part 1: GeneralISO/IEC 20008-1:2013 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Anonymous digital
signatures -- Part 2: Mechanisms using a group public keyISO/IEC 20008-2:2013 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- A framework for access
managementISO/IEC 29146:2016 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Guidelines for the use
and management of Trusted Third Party servicesISO/IEC TR 14516:2002 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Information security for
supplier relationships -- Part 1: Overview and conceptsISO/IEC 27036-1:2014 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Information security for
supplier relationships -- Part 2: RequirementsISO/IEC 27036-2:2014 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Information security for
supplier relationships -- Part 3: Guidelines for information and
communication technology supply chain security
ISO/IEC 27036-3:2013 New Preparatory 35.030BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Information security for
supplier relationships -- Part 4: Guidelines for security of cloud servicesISO/IEC 27036-4:2016 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Incident investigation
principles and processesISO/IEC 27043:2015 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Privacy architecture
frameworkISO/IEC 29101:2018 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- Privacy capability
assessment modelISO/IEC 29190:2015 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology -- Security techniques -- A framework for identity
management -- Part 3: PracticeISO/IEC 24760-3:2016 New Preparatory 35.030
BPS/TC 60 Information Technology
SC 1 IT Security Tecniques
Information technology – Learning, education, and training –
Requirements for e-textbooks in education
ISO/IEC TR 18120 with Amendment 1:2019
(ISO/IEC published 2016)New Finalization 35.240.90
BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology – Individualized adaptability and accessibility in e-
learning, education and training – Part 2: "Access for all" personal needs
and preferences for digital delivery
ISO/IEC 24751-2:2008 New Finalization 03.100.30; 35.240.90 BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology – Individualized adaptability and accessibility in e-
learning, education and training – Part 3: "Access for all" digital resource
description
ISO/IEC 24751-3:2008 New Finalization 03.100.30; 35.240.90 BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology -- Learning, education and training --
Collaborative technology -- Collaborative workplace -- Part 1:
Collaborative workplace data model
ISO/IEC 19778-1:2015 New Organization Meeting 03.100.30; 35.240.90 BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology -- Learning, education and training --
Collaborative technology -- Collaborative workplace -- Part 2:
Collaborative environment data model
ISO/IEC 19778-2:2015 New Organization Meeting 03.100.30; 35.240.90 BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Information technology -- Learning, education and training --
Collaborative technology -- Collaborative workplace -- Part 3:
Collaborative group data model
ISO/IEC 19778-3:2015 New Organization Meeting 03.100.30; 35.240.90 BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology -- Learning, education and training --
Collaborative technology -- Collaborative learning communication -- Part
1: Text-based communication
ISO/IEC 19780-1:2015 New Preparatory 03.100.30; 35.240.90 BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology -- Learning, education and training -- Metadata
for learning resources -- Part 1: Framework
ISO/IEC 19788-1:2011
with Amendment 1:2014New Preparatory 03.100.30; 35.240.90
BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology -- Learning, education and training -- Metadata
for learning resources -- Part 5: Educational elementsISO/IEC 19788-5:2012 New Preparatory 03.100.30; 35.240.90
BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology for learning, education and training -- Information
model for competency -- Part 1: Competency general framework and
information model
ISO/IEC 20006-1:2014 New Preparatory 03.100.30; 35.240.90 BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology for learning, education and training -- Information
model for competency -- Part 2: Proficiency level information modelISO/IEC 20006-2:2015 New Preparatory 03.100.30; 35.240.90
BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology for learning, education and training -- Learning
analytics interoperability -- Part 1: Reference modelISO/IEC TR 20748-1:2016 New Preparatory 03.100.30; 03.180; 35.240.90
BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology for learning, education and training -- Nomadicity
and mobile technologies -- Part 1: Nomadicity reference modelISO/IEC TS 29140-1:2011 New Preparatory 03.100.30; 35.240.90
BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology for learning, education and training -- Nomadicity
and mobile technologies -- Part 2: Learner information model for mobile
learning
ISO/IEC TS 29140-2:2011 New Preparatory 03.100.30; 35.240.90 BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology -- Identification of privacy protection
requirements pertaining to learning, education and training (LET) -- Part
1: Framework and reference model
ISO/IEC 29187-1:2013 New Preparatory 03.100.30 ;35.240.90 BPS/TC 60 Information Technology
SC 2 IT for Learning, Education and Training
Information technology — Service management — Part 1: Service
management system requirementsISO/IEC 20000-1:2018 New Circulation 35.020; 03.080.99
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology — Service management — Part 2: Guidance on
the application of service management systemsISO/IEC 20000-2:2012 New Finalization 35.020; 03.080.99
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology — Service management — Part 3: Guidance on
scope definition and applicability of ISO/IEC 20000-1ISO/IEC 20000-3:2012 New Finalization 35.020; 03.080.99
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology — Service management — Part 5: Exemplar
implementation plan for ISO/IEC 20000-1ISO/IEC TR 20000-5:2013 New Finalization 35.020; 03.080.99
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology – Service management – Part 6: Requirements
for bodies providing audit and certification of service management
systems
ISO/IEC 20000-6:2017 New Circulation 03.080.99; 03.120.20; 35.020
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology – Service management – Part 10: Concepts and
terminologyISO/IEC TR 20000-10:2018 New Circulation 35.020; 03.080.99
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Information technology – Service management – Part 11: Guidance on
the relationship between ISO/IEC 20000-1:2011 and service
management frameworks: ITIL®
ISO/IEC TR 20000-11:2015 New Circulation 03.080.99; 35.020
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology – Service management – Part 12: Guidance on
the relationship between ISO/IEC 20000-1:2011 and service
management frameworks: CMMI-SVC
ISO/IEC TR 20000-12:2016 New Circulation 03.080.99; 35.020
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Software engineering -- Guidelines for the application of ISO 9001:2015
to computer software
PNS ISO/IEC 90003:2004 (ISO published
2004) Revision Circulation 03.100.70; 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Systems and software engineering – Software life cycle processes PNS ISO/IEC 12207:2004 (ISO/IEC published
1995 with Amd. 1:2002)Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology – Measurement and rating of performance of
computer based software systems
PNS ISO/IEC 14756:2004 (ISO/IEC published
1999)Reconfirmation Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology -- Open Distributed Processing -- Reference
Model: Architecture
PNS ISO/IEC 10746-3:2004
(ISO/IEC published 1996) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology -- Open Distributed Processing -- Trading
Function -- Part 3: Provision of Trading Function using OSI Directory
service
PNS ISO/IEC 13235-3:2004
(ISO/IEC published 1998)Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology -- Guideline for the evaluation and selection of
CASE tools
PNS ISO/IEC 14102:2004
(ISO/IEC published 1995) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology -- Software measurement -- Functional size
measurement -- Part 1: Definition of concepts
PNS ISO/IEC 14143-1:2004
(ISO/IEC published 1998) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology -- Software measurement -- Functional size
measurement -- Part 2: Conformity evaluation of software size
measurement methods to ISO/IEC 14143-1:1998
PNS ISO/IEC 14143-2:2004
(ISO/IEC published 2002)Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
ISO/IEC TR 14471:1999
Information technology -- Software engineering -- Guidelines for the
adoption of CASE tools
PNS ISO/IEC/TR 14471:2004
(ISO/IEC published 1999) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology -- Open distributed processing -- Reference
model -- Enterprise language
PNS ISO/IEC 15414:2004
(ISO/IEC published 2002) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
ISO/IEC 15476-2:2002
Information technology -- CDIF semantic metamodel -- Part 2: Common
PNS ISO/IEC 15476-2:2013
(ISO/IEC published 2002) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology -- Process assessment -- Part 4: Guidance on
use for process improvement and process capability determination
PNS ISO/IEC TR 15504-4:2004
(ISO/IEC published 1998) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology -- Software Process Assessment -- Part 5: An
assessment model and indicator guidance
PNS ISO/IEC TR 15504-5:2004
(ISO/IEC published 1999) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Information technology -- Software process assessment -- Part 4: Guide
to performing assessments
PNS ISO/IEC TR 15504-8:2004
(ISO/IEC published 1998) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Software engineering -- Software measurement process
PNS ISO/IEC 15939:2004
(ISO/IEC published 2002) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Software engineering -- Guide for the application of ISO/IEC 12207 to
project management
PNS ISO/IEC TR 16326:2004
(ISO/IEC published 1999) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information technology -- Open Distributed Processing -- Part 2: General
Inter-ORB Protocol (GIOP)/Internet Inter-ORB Protocol (IIOP)
PNS ISO/IEC 19500-2:2004
(ISO/IEC published 2003) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Software engineering -- COSMIC-FFP -- A functional size measurement
method
PNS ISO/IEC 19761:2004
(ISO/IEC published 2003) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Software engineering -- IFPUG 4.1 Unadjusted functional size
measurement method -- Counting practices manual
PNS ISO/IEC 20926:2004
(ISO/IEC published 2003) Revision Circulation 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Systems and software engineering -- Systems and software Quality
Requirements and Evaluation (SQuaRE) -- System and software quality
models
ISO/IEC 25010:2011 New Organization Meeting 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Systems and software engineering – Framework for categorization of IT
systems and software, and guide for applying it
PNS ISO/IEC/TR 12182:2004 (ISO/IEC/TR
published 1998)Revision Organization Meeting 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Software Engineering – Software Life Cycle Processes – Maintenance PNS ISO/IEC 14764:2004 (ISO/IEC published
1999)Revision Organization Meeting 35.080
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information processing – Documentation symbols and conventions for
data, program and system flowcharts, program network charts and
system resources charts
PNS ISO 5807:2013 (ISO published 1985) Reconfirmation Organization Meeting 35.080; 01.080.50
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Information processing systems – Computer system configuration
diagram symbols and conventions PNS ISO 8790:2013 (ISO published 1987) Reconfirmation Organization Meeting 35.080; 01.080.50
BPS/TC 60 Information Technology
SC 3 Software and Systems Engineering & IT Service
Manangement and IT Governance
Cleanrooms and associated controlled environments -- Part 1:
Classification of air cleanliness by particle concentrationISO 14644-1:2015 New Published 13.040.35
BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 2:
Monitoring to provide evidence of cleanroom performance related to air
cleanliness by particle concentration
ISO 14644-2:2015 New Published 13.040.35BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 3: Test
methodsISO 14644-3:2005 New Published 13.040.35
BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 4: Design,
construction and start-upISO 14644-4:2001 New Finalization 13.040.35
BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 5:
OperationsISO 14644-5:2004 New Circulation 13.040.35
BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 7:
Separative devices (clean air hoods, gloveboxes, isolators and mini-
environments)
ISO 14644-7:2004 New Finalization 13.040.35BPS/TC 83 Cleanrooms and Associated Controlled
Environments
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Cleanrooms and associated controlled environments -- Part 8:
Classification of air cleanliness by chemical concentration (ACC)ISO 14644-8:2013 New Circulation 13.040.35
BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 9:
Classification of surface cleanliness by particle concentrationISO 14644-9:2012 New Organization Meeting 13.040.35
BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 10:
Classification of surface cleanliness by chemical concentrationISO 14644-10:2013 New Preparatory 13.040.35
BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 12:
Specifications for monitoring air cleanliness by nanoscale particle
concentration
ISO 14644-12:2018 New Preparatory 13.040.35BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 13: Cleaning
of surfaces to achieve defined levels of cleanliness in terms of particle
and chemical classifications
ISO 14644-13:2017 New Preparatory 13.040.35BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 14:
Assessment of suitability for use of equipment by airborne particle
concentration
ISO 14644-14:2016 New Preparatory 13.040.35BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Part 15:
Assessment of suitability for use of equipment and materials by airborne
chemical concentration
ISO 14644-15:2017 New Preparatory 13.040.35BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Biocontamination
control -- Part 1: General principles and methodsISO 14698-1:2003 New Preparatory 13.040.35
BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Cleanrooms and associated controlled environments -- Biocontamination
control -- Part 2: Evaluation and interpretation of biocontamination dataISO 14698-2:2003 with Corrigendum 1:2004 New Preparatory 13.040.35
BPS/TC 83 Cleanrooms and Associated Controlled
Environments
Controllers with analogue signals for use in industrial-process control
systems - Part 1: Methods of evaluating the performanceIEC 60546-1:2010 New Preparatory 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Controllers with analogue signals for use in industrial-process control
systems - Part 2: Guidance for inspection and routine testingIEC 60546-2:2010 New Preparatory 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Thermocouples - Part 1: EMF specifications and tolerances IEC 60584-1:2013 New Preparatory 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Thermocouples - Part 3: Extension and compensating cables -
Tolerances and identification systemIEC 60584-3:2007 New Preparatory 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process measurement and control equipment - Operating
conditions - Part 1: Climatic conditionsIEC 60654-1:1993 New Preparatory 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Operating conditions for industrial-process measurement and control
equipment. Part 2: PowerIEC 60654-2:1979+AMD1:1992 New Preparatory 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Operating conditions for industrial-process measurement and control
equipment - Part 3: Mechanical influencesIEC 60654-3:1983 New Preparatory 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Operating conditions for industrial-process measurement and control
equipment. Part 4: Corrosive and erosive influencesIEC 60654-4:1987 New Preparatory 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process measurement, control and automation - Evaluation of
system properties for the purpose of system assessment - Part 1:
Terminology and basic concepts
IEC 61069-1:2016 New Preparatory 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process measurement, control and automation - Evaluation of
system properties for the purpose of system assessment - Part 2:
Assessment methodology
IEC 61069-2:2016 New Preparatory 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Industrial-process measurement, control and automation - Evaluation of
system properties for the purpose of system assessment - Part 3:
Assessment of system functionality
IEC 61069-3:2016 New Preparatory 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process measurement, control and automation - Evaluation of
system properties for the purpose of system assessment - Part 4:
Assessment of system performance
IEC 61069-4:2016 New Preparatory 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process measurement, control and automation - Evaluation of
system properties for the purpose of system assessment - Part 5:
Assessment of system dependability
IEC 61069-5:2016 New Preparatory 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process measurement, control and automation - Evaluation of
system properties for the purpose of system assessment - Part 6:
Assessment of system operability
IEC 61069-6:2016 New Preparatory 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process measurement, control and automation - Evaluation of
system properties for the purpose of system assessment - Part 7:
Assessment of system safety
IEC 61069-7:2016 New Preparatory 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process measurement, control and automation - Evaluation of
system properties for the purpose of system assessment - Part 8:
Assessment of other system properties
IEC 61069-8:2016 New Preparatory 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Management of alarm systems for the process industries IEC 62682:2014 New Preparatory 13.320 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Expression of performance of air quality infra-red analyzers IEC 60528:1975 New Preparatory 13.040.01 17.020 31.260(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Dimensions of panel areas and cut-outs for panel and rack-mounted
industrial-process measurement and control instrumentsIEC TR 60668:1980 New Preparatory 29.100.01 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 0: Functional safety and IEC 61508IEC TR 61508-0:2005 New Published 25.040.40; 29.020; 35.240.50
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 1: General requirementsIEC 61508-1:2010 New Published 13.110; 25.040.40; 29.020
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 2: Requirements for
electrical/electronic/programmable electronic safety-related systems
IEC 61508-2:2010 New Published 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control
devices)
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 3-1: Software requirements - Reuse of pre-
existing software elements to implement all or part of a safety function
IEC TS 61508-3-1:2016 New Published 25.040.40; 35.240.50(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 5: Examples of methods for the determination of
safety integrity levels
IEC 61508-5:2010 New Published 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 6: Guidelines on the application of IEC 61508-2
and IEC 61508-3
IEC 61508-6:2010 New Published 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Functional safety of electrical/electronic/programmable electronic safety-
related systems - Part 7: Overview of techniques and measuresIEC 61508-7:2010 New Published 25.040.40; 35.240.50
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Functional safety - Safety instrumented systems for the process industry
sector - Part 0: Functional safety for the process industry and IEC
61511
IEC TR 61511-0:2018 New Published 13.110; 25.040.01(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Functional safety - Safety instrumented systems for the process industry
sector - Part 1: Framework, definitions, system, hardware and
application programming requirements
IEC 61511-1:2016+AMD1:2017 CSV New Published 13.110; 25.040.01(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Functional safety - Safety instrumented systems for the process industry
sector - Part 2: Guidelines for the application of IEC 61511-1:2016IEC 61511-2:2016 New Published 13.110; 25.040.01
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Functional safety - Safety instrumented systems for the process industry
sector - Part 3: Guidance for the determination of the required safety
integrity levels
IEC 61511-3:2016 New Published 13.110; 25.040.01(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Batch control - Part 1: Models and terminology IEC 61512-1:1997 New Published 25.040.40; 01.040.25(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Batch control - Part 2: Data structures and guidelines for languages IEC 61512-2:2001 New Published 35.240.50(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Batch control - Part 3: General and site recipe models and
representation IEC 61512-3:2008 New Published 25.040.40; 35.240.50
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Batch control - Part 4: Batch production records IEC 61512-4:2009 New Published 25.040.40 (IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 1: Control valve terminology and
general considerationsIEC 60534-1:2005 New Published 23.060.40 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 2-1: Flow capacity - Sizing
equations for fluid flow under installed conditionsIEC 60534-2-1:2011 & COR1:2015 New Published 23.060.40 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 2-3: Flow capacity - Test
proceduresIEC 60534-2-3:2015 New Published 23.060.40 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow
characteristics and rangeabilityIEC 60534-2-4:2009 New Published 23.060.40 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 3-1: Dimensions - Face-to-face
dimensions for flanged, two-way, globe-type, straight pattern and centre-
to-face dimensions for flanged, two-way, globe-type, angle pattern
control valves
IEC 60534-3-1:2000 New Published 23.060.40 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 3-2: Dimensions - Face-to-face
dimensions for rotary control valves except butterfly valves IEC 60534-3-2:2001 New Published 23.060.40 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 3-3: Dimensions End-to-end
dimensions for buttweld, two-way, globe-type, straight pattern control
valves
IEC 60534-3-3:1998 New Published 23.060.40 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 4: Inspection and routine testing IEC 60534-4:2006 New Published 23.060.40 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 5: Marking IEC 60534-5:2004 New Published 23.060.40 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 6: Mounting details for
attachment of positioners to control valves - Section 1: Positioner
mounting on linear actuators
IEC 60534-6-1:1997 New Published 23.060.40 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 6-2: Mounting details for
attachment of positioners to control valves - Positioner mounting on
rotary actuators
IEC 60534-6-2:2000 New Published 23.060.40 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
TECHNICAL COMMITTEESUBJECT PROJECT REFERENCE
STATUS
[New/Revision (Amd./Cor.)/
Reconfirmation]
STAGES OF DEVELOPMENT
1. Preparatory
2. Organization Meeting
3. Drafting/Deliberation
4. Circulation
5. Finalization
6. Approval
7. Published
INTERNATIONAL CLASSIFICATION
FOR STANDARDS
(ICS)
PROPOSED WORK PROGRAM FOR 2019 as of 24 July 2019
Industrial-process control valves - Part 7: Control valve data sheet IEC 60534-7:2010 New Published 23.060.40 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 8-1: Noise considerations -
Laboratory measurement of noise generated by aerodynamic flow
through control valves
IEC 60534-8-1:2005 New Published 23.060.40 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 8-2: Noise considerations -
Laboratory measurement of noise generated by hydrodynamic flow
through control valves
IEC 60534-8-2:2011 New Published 23.060.40 25.040.40(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 8-4: Noise considerations -
Prediction of noise generated by hydrodynamic flowIEC 60534-8-4:2015 New Published 23.060.40 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Industrial-process control valves - Part 9: Test procedure for response
measurements from step inputsIEC 60534-9:2007 & COR 1:2008 New Published 23.060.40 25.040.40
(IEC/TC TC 65/SC 65B - Measurement and control
devices)
Top Related