Project Repot on Comparative Study
Of
Customer Satisfaction on Bajaj Pulsar 150 cc v/s Yamaha FZ
Submitted in partial fulfillment of the requirements
for the award of the degree of
Bachelor of Business Administration (BBA)
To
Guru Gobind Singh Indraprastha University, Delhi
Guide: Submitted by:
Ms.Rama Srivastava
Kuldeep Singh
Institute of Information Technology & Management,
New Delhi – 110058
Batch (2009-2012)
Certificate
I, Mr. Kuldeep Singh, Roll No. 09513701709 certify that the Project Report/Dissertation (BBA-
310) entitled “Customer Satisfaction On Bajaj Pulsar 150cc v/s Yamaha FZ” is done by me and it
is an authentic work carried out by me at Institute of Information Technology and Management.
The matter embodied in this project work has not been submitted earlier for the award of any
degree or diploma to the best of my knowledge and belief.
Signature of the Student
Date:
Certified that the Project Report/Dissertation (BBA-310) entitled “Customer Satisfaction On
Bajaj Pulsar 150cc v/s Yamaha FZ” done by Mr.Kuldeep Singh, Roll No.09513701709,
is completed under my guidance.
Signature of the Guide
Date:
Name of the Guide:
Designation:
Address:
Institute of Information Technology & Management,
New Delhi-110058
Countersigned
Director/Project Coordinator
ACKNOWLEDGEMENT
“NO MAN IS COMPLETE IN KNOWLEDGE BT A SINGLE RAY OF KNOWLEDGE IS
HELPFUL TO A MAN.”
The research work on the topic was given to me as a subject in my course curriculum in bachelor
s degree in business administration.
I have tried my best to present this information as clearly as possible using basic terms that I
hope will comprehend by the widest spectrum of researchers and analysts.
I have completes this study under the guidance of my project guide Ms. Rama Srivastava ; I
won’t be able to perform well without her esteemed guidance and knowledge I have received
from them for the timely completion of my work.
Mere acknowledgement may not redeem the debt I owe to my parents for their direct as well as
indirect support during the entire course of the project.
“GUIDANCE IS THE BEST IN THE WAY OF PROGRESS.”
Kuldeep Singh
EXECUTIVE SUMMARY
The topic of the study is Bajaj Pulsar 150 cc v/s Yamaha FZ. Firstly knowing about Bajaj Pulsar
150cc.Bajaj Auto Limited is the largest two wheeler manufacturing company in India. Bajaj
company is engaged in the production of two wheelers and three wheelers. The company was
started by Jamanlal Bajaj in the year 1945. The major headquarters of the company were in
Akurdi, Maharashtra, and Chakan. Intitaly the material was imported from outside but after some
time the manufacturing was stated in the country itself. Bajaj company has initially tied up
Kawasaki heavy Industries of Japan which was self sufficient in making new technology bikes in
the world. Bajaj auto started its working from making the first bike Bajaj 100 Dlx which was
very much costly at that time, the person having a huge pocket can only afford to buy it. Right
now, the company is headed by Rahul Bajaj having a net worth of rupees 3454 crore and around
10,250 employees working in the organization.
Bajaj Pulsar 150 cc is a motorcycle brand owned by Bajaj Auto limited. The product designing
and engineering was based with the Tokyo based company. The concept of Bajaj Pulsar came in
the market when the Yamaha FZ first model. After that the design and technology was seen and
some innovations were done and Bajaj Pulsar came in the market after that time. The launch of
Bajaj Pulsar 150 cc was in the year 2001, and slowly and gradually as the time changes ₒ
innovations and better technology was used in the designing of the bikes. It introduced the DTSi
technology which increased the power of the bike, and many many more technology was used.
Hero MotoCorp was started by Munjals brothers previously known as Hero Honda is an Indian
motorcycle manufacturing brand that is engaged in the production of two wheelers. This was a
Joint Venture between the Hero MotoCorp and the Honda company of Japan for the
manufacturing of the two wheelers. But subsequently in 2010, Honda wanted to slip this venture,
and then Hero MotoCorp purchased its shares and became Hero MotoCorp.
It’s a big drawback for the company because the major designing of the bikes were done in Japan
and they were bought in use everywhere, the market value of Hero Moto Corp may decline
because of this termination of the joint venture between the two countries.
Hero CBZ Xtreme was launched in the year 1999 with a lot of ₒ features and a good technology,
the stylish CB Xtreme was made up of different technology that it worked so fast in the market.
After knowing about the history of the companies, further the research work was carried on. The
research work consisted of the collection of primary data which is collecting the information
from the customers itself and then interpreting the results there of. The sampling techniques used
was convenience sampling as its easy to perform. Various bar graphs and charts and tables were
made to represent the data in a better manner and the measures of central tendency such as
mean , standard deviation, and correlation were made to analyze data in a more consensus way.
Then after this the actual interpretation of data is done where in the demographic factors and
questionnaires were analyzed on the basis of the answers marked by the interviewees.
After analyzing the data there after results and conclusions were drawn and it concluded that
Bajaj Pulsar and CBZ Xtreme both have positive and negative points and both need to take some
corrective measures for that.
On a whole both are a same kind a bike using same power engine but somehow. Looks are
different.
CONTENT
S No Topic Page No
1 Certificate (s) -
2 Acknowledgements -
3 Executive Summary -
4 List of Tables -
5 List of Figures -
6 List of Symbols -
7 List of Abbreviations -
8 Chapter-1: Introduction
9 Chapter-2: Methodology & Theoretical Framework
10 Chapter-3: Data Presentation & Analysis
11 Chapter-4: Summary and Conclusions
12 References/Bibliography
13 Appendices
LIST OF TABLES
Table No Title Page No
1 Number of Employees in Organisation ABC
2
LIST OF FIGURES
Figure No Title Page No
1 Sales Figures of RO Water Purifier 2002-2006
2
LIST OF SYMBOLS
S No Symbol Nomenclature & Meaning
1 Sigma (Summation)
2 @ At the rate
LIST OF ABBREVIATIONS
S No Abbreviated Name Full Name
1 CRM Customer Relationship Management
2 EPS Earning Per Share
CHAPTER 1:INTRODUCTION OF
THE COMPANY
Bajaj Auto limited is one of the largest two wheeler manufacturing company in India apart from
producing two wheelers they also manufacture three wheelers. The company had started its way
back in 1945. Initially it used to import the two wheelers from outside, but from 1959 it started
manufacturing of two wheelers in the country. By the year 1970 Bajaj Auto had rolled out their
100,000th vehicle. Bajaj scooters and motor cycles have become an integral part of the Indian
milieu and over the years have come to represent the aspirations of modern India. Bajaj Auto
also has a technical tie up with Kawasaki heavy industries of Japan to produce the latest
motorcycles in India which are of world class quality The Bajaj Kawasaki eliminator has
emerged straight out of the drawing board of Kawasaki heavy industries. The core brand values
of Bajaj Auto limited includes Learning, Innovation, Perfection, Speed and Transparency.
Bajaj Auto has three manufacturing units in the country at Akurdi, Waluj and Chakan in
Maharashtra, western India, which produced 2,314,787 vehicles in 2005-06. The sales are backed
by a network of after sales service and maintenance work shops all over the country.
Bajaj Auto has products which cater to every segment of the Indian two wheeler market Bajaj CT
100 Dlx offers a great value for money at the entry level. Similarly Bajaj Discover 125 offers the
consumer a great performance without making a big hole in the pocket.
PROFILE
Bajaj Auto Limited
Type Public
Traded as BSE: 532977, NSE: BAJAJ-AUTO
BSE SENSEX Constituent
Industry Automotive
Headquarters Pune, Maharashtra, India
Key people Rahul Bajaj (Chairman)
Products Motorcycles, three-wheeler vehicles and cars
Revenue 16,974 crore (US$3.73 billion)(2011)
Net income 3,454 crore (US$759.88 million)(2011)
Employees 10,250 (2006-07)
Parent Bajaj Group
Website www.bajajauto.com
Bajaj Auto Limited (BSE: 532977, NSE: BAJAJ-AUTO) is an Indian motorized vehicle-
producing company. Bajaj Auto is a part of Bajaj Group. Its founded by Jamnalal
Bajaj at Rajasthan in the 1930s. It is based in Pune, Maharashtra, with plants in Chakan (Pune),
Waluj (nearAurangabad) and Pantnagar in Uttaranchal. The oldest plant at Akurdi (Pune) now
houses the R&D centre Ahead. Bajaj Auto makes and
exports automobiles, scooters, motorcycles and the auto rickshaw.
The Forbes Global 2000 list for the year 2005 ranked Bajaj Auto at 1,946. It features at 1639 in
forbes 2011 list.
Over the last decade, the company has successfully changed its image from a scooter
manufacturer to a two-wheeler manufacturer. Its product range encompasses scooterettes,
scooters and motorcycles. Its real growth in numbers has come in the last four years after
successful introduction of a few models in the motorcycle segment.
The company is headed by Rahul Bajaj who is worth more than US$1.5 billion. Bajaj Auto came
into existence on 29 November 1945 as M/s Bachraj Trading Corporation Private Limited. It
started off by selling imported two- and three-wheelers in India. In 1959, it obtained license from
the Government of India to manufacture two- and three-wheelers and it went public in 1960. In
1970, it rolled out its 100,000th vehicle. In 1977, it managed to produce and sell 100,000
vehicles in a single financial year. In 1985, it started producing at Waluj near Aurangabad. In
1986, it managed to produce and sell 500,000 vehicles in a single financial year. In 1995, it
rolled out its ten millionth vehicle and produced and sold one million vehicles in a year.
According to the authors of Globality: Competing with Everyone from Everywhere for
Everything, Bajaj has grown operations in 50 countries by creating a line of value-for-money
bikes targeted to the different preferences of entry-level buyers.
BAJAJ PULSAR 150 cc
Bajaj Pulsar is a motorcycle brand owned by Bajaj Auto in India. The two wheeler was
developed by the product engineering division of Bajaj Auto in association with Tokyo R&D and
later with motorcycle designer Glynn Kerr. Currently there are four variants available -with
engine capacities of 135 cc, 150 cc, 180 cc and 220 cc. Previously it was also offered with a
200 cc DTS-i oil cooled engine, which now has been discontinued. More than a million units of
Pulsar were sold by November 2005. With an average monthly sales of around 86,000 units in
2011, Pulsar has a market share of 47% in its segment.
Before the introduction of the Pulsar, the Indian motorcycle market trend was towards fuel
efficient, small capacity motorcycles (that formed the 80-125 cc class). Bigger motorcycles with
higher capacity virtually did not exist (except for Enfield Bullet). The launch and success of
Hero Honda CBZ in 1999 showed that there was demand for performance bikes. Bajaj took the
cue from there on and launched the Pulsar twins in India on 24 November 2001. Since the
introduction and success of Bajaj Pulsar, Indian youth began expecting high power and other
features from affordable motorcycles.
The project was faced with internal resistance, reservations by Mckinsey and doubts on its
effects on Bajaj's relation with Kawasaki. The project required approximately 36 months for
completion and cost Bajaj Rs 1 billion.
EVOLUTION
YEAR Level of Changes
2001 • Originally came with 150 cc air-cooled, single-cylinder, petrol, spark-
ignited four-stroke engine which made 13 HP of maximum power.
• featured a single spark plug to ignite the air-fuel mixture fed from
a carburetor.
• simple spring shock absorbers, round headlamp dome and
1,265 mm wheelbase
• Other standard features were parking lights and an aircraft-type fuel tank lid
2003 • newly developed DTSi technology, which increased the power rating of
both versions by 1 hp (0.75 kW)
• increased fuel economy
• introduce a new headlamp assembly, 1,320 mm wheelbase, and standard
twin-tone horn and trip meter.
2005 • Bajaj launched another upgrade of the Pulsar
• The bike was offered with 17-inch (430 mm) alloy wheels as standard
option
• The power output was now further increased to 13.5 hp (10.1 kW) @ 8500
rpm for the 150 cc
• The rear shock absorbers were now gas-filled Nitrox absorbers.
2009 • Bajaj released the UG IV (fourth upgrade) versions of the Pulsar 150
• The upgrades for the Pulsar 150 included an all-black theme, tank scoops
similar to those on the Pulsar 200, a 3D Pulsar logo, and a changed
electrical system (full DC). Power also increased from 13.5 HP to 14.09 HP
(at 8,500 rpm).
2010 • Bajaj released the UG 5 (fifth upgrade) versions of the Pulsar 150 included
an clip-on handlebars like those in Pulsar 135LS. Power also increased from
14.09 HP to 15.06 HP (at 9,000 rpm).
Hero Motocorp Ltd. (BSE: 500182, NSE: HEROMOTOCO) formerly known as Hero Honda is
an Indian motorcycle and scooter manufacturer based in New Delhi, India. Hero Honda started in
1984 as a joint venture between Hero Cycles of India and Honda of Japan. The company is the
largest two wheeler manufacturer in India. The 2006 Forbes 200 Most Respected companies list
has Hero Honda Motors ranked at 108.
In 2010, When Honda decided to move out of the joint venture, Hero Group bought the shares
held by Honda. Subsequently, in August 2011 the company was renamed Hero MotoCorp with a
new corporate identity.
Hero Motocorp Ltd
Type Public company
Traded as BSE: 500182
NSE: HEROMOTOCO
BSE SENSEX Constituent
Industry Automotive
Founded 19 January 1984 (Gurgaon)
Founder(s) Brijmohan Lall Munjal
Headquarters New Delhi, India
Key people Brijmohan Lall Munjal (Chairman)
Pawan Munjal (MD & CEO)
Products Motorcycles, scooters, three-wheeler vehicles and spare parts
Revenue 19,669.290 crore (US$3.92 billion)
Operating income 2,597.07 crore (US$518.12 million)(FY 2010-2011)
Net income 1,927.90 crore (US$384.62 million)(FY 2010-2011)
Parent Hero Group
Website www.heromotocorp.com
Company Profile
“Hero” is the brand name used by the Munjal brothers for their flagship company Hero Cycles
Ltd. A joint venture between the Hero Group and Honda Motor Company was established in
1984 as the Hero Honda Motors Limited at Dharuhera India. Munjal family and Honda group
both own 26% stake in the Company. In 2010, it was reported that Honda planned to sell its
stake in the venture to the Munjal family.
During the 1980s, the company introduced motorcycles that were popular in India for their fuel
economy and low cost. A popular advertising campaign based on the slogan 'Fill it - Shut it -
Forget it' that emphasised the motorcycle's fuel efficiency helped the company grow at a double-
digit pace since inception. The technology in the bikes of Hero Honda for almost 26 years
(1984–2010) has come from the Japanese counterpart Honda.
Hero MotoCorp has three manufacturing facilities based at Dharuhera, Gurgaon in Haryana
and at Haridwar in Uttarakhand. These plants together are capable of churning out 3 million
bikes per year. Hero MotoCorp has a large sales and service network with over 3,000 dealerships
and service points across India. Hero Honda has a customer loyalty program since 2000, called
the Hero Honda Passport Program.
The company has a stated aim of achieving revenues of $10 billion and volumes of 10 million
two-wheelers by 2016-17. This in conjunction with new countries where they can now market
their two-wheelers following the disengagement from Honda, Hero MotoCorp hopes to achieve
10 per cent of their revenues from international markets, and they expected to launch sales in
Nigeria by end-2011 or early-2012. In addition, to cope with the new demand over the coming
half decade, the company was going to build their fourth factory in South India and their fifth
factory in Western India. There is no confirmation where the factories would be built.
Termination of Honda joint venture
In December 2010, the Board of Directors of the Hero Honda Group have decided to terminate
the joint venture between Hero Group of India and Honda of Japan in a phased manner. The
Hero Group would buy out the 26% stake of the Honda in JV Hero Honda. Under the joint
venture Hero Group could not export to international markets (except Sri Lanka) and the
termination would mean that Hero Group can now export. Since the beginning, the Hero Group
relied on their Japanese partner Honda for the technology in their bikes. So there are concerns
that the Hero Group might not be able to sustain the performance of the Joint Venture alone.
HERO CBZ XTREME
Hero Honda CBZ, launched in early 1999 by Hero Honda Motors, with an original Honda
156.8 cc engine
The over-square engine, that met . The styling of the bike was a scaled version of the
famous Honda CB series.Euro1, was fed by a Keihin slide type carburetor with accelerator pump
for better pick-up. It makes use of a larger spring operated nozzle to provide a richer fuel air
mixture into the engine for better acceleration. An air injection system injects fresh air into the
exhaust port, to meet the emission norms.
CBZ Xtreme
Manufacturer Hero Honda
Predecessor CBZ
Class Naked bike
Engine 149.2 cc (9.10 cu in)
Bore / Stroke 57.3 × 57.8 mm (2.26 × 2.28 in)
Transmission 5-speed, constant mesh
Brakes front 240 mm disc
rear 130 mm drum
Wheelbase 1,325 mm (52.2 in)
Dimensions L 2,080 mm (82 in)
W 765 mm (30.1 in)
H 1,145 mm (45.1 in)
Weight 143 kg (320 lb) (dry)
Fuel capacity 12.3 litres (2.7 imp gal; 3.2 US gal)
CBZ Xtreme is a 150 cc motorcycle from Hero Honda Motors which is the successor of
the Hero Honda CBZ. The bike was introduced in the year 2008. Except for a mild resemblance
to the older CBZ's headlamp, the new model has little else in common.
Design
The turn indicators have been integrated into the headlamp housing and the tail lamp cluster
features a segmented stop and brake light section with the turn indicators built into a single unit
that wraps around the brake light’s bottom side. Also LEDs have been used replacing the
conventional bulbs. The split hand grips for the pillion rider serves in providing a different look.
The CBZ Xtreme has an asymmetric instrument panel with carbon matte finish. There are
analogue gauges, including an tachometer, speedometer and fuel gauge, in addition to high beam,
turn and neutral indicators.
OBJECTIVES
• To analyze the customer satisfaction
• To know which manufacturer is providing better services.
• To analyze after sales services of bikes
• To study the behavioral factors of consumers in motor bikes.
SCOPE OF STUDY
• To carry out market survey of Comparison Yamaha FZ and Bajaj Pulsar 150cc on the
basis of customer satisfaction.
• For this purpose the geographical area selected is West Delhi. Data is collected through a
questionnaire.
Chapter 2:Methodology and Theoretical
Framework
RESEARCH METHODOLOGY
Research is the systematic investigation into existing or new knowledge. It is used to establish or
confirm facts, reaffirm the results of previous work, solve new or existing problems, support
theorems, or develop new theories. A research project may also be an expansion on past work in
the field. In order to test the validity of instruments, procedures, or experiments, research may
replicate elements of prior projects, or the project as a whole. The primary purposes of basic
research are documentation, discovery, interpretation, or the research and development of
methods and systems for the advancement of human knowledge.
• METHODOLOGY USED FOR DATA COLLECTION
Analysis of data is a process of inspecting, cleaning, transforming, and modelling data with the
goal of highlighting useful information, suggesting conclusions, and supporting decision making.
Data analysis has multiple facets and approaches, encompassing diverse techniques under a
variety of names, in different business, science, and social science domains.
Research Design
Research design is considered as a "blueprint" for research, dealing with at least four problems:
which questions to study, which data are relevant, what data to collect, and how to analyze the
results. The best design depends on the research question as well as the orientation of the
researcher. Every design has its positive and negative sides.
A Research Design is a plan structure and strategy of investigation so as to obtain answers to
record, study and control variance.
• It should be object oriented, reliable, varied and general. This does not mean that it is
near fact gathering studies. The study is of greater use as collection of data is done
with definite purpose of preplanned design with people for a certain period of time to
collect data.
• Questionnaire is used to collect data from the customers in West Delhi region.
Research design: Exploratory study
An exploratory study is similar to an investigatory project. It is a study that is undertaken when
little is known about a subject or no information is available on how a similar problem or similar
research issues have been solved in the past. In doing this it requires work interviewing those
with experience and those of an expert nature, or both, in order to be both correct in terms of
observations but also correct in terms of interpretation and portrayal when showing data.
Exploratory studies don't have to rely on no pre-existing information though. They can operate
on old and common knowledge but pursue a new or little known direction for investigation. This
is not to be confused with exploratory research, which is for after exploratory study and further
investigation and deeper understanding of pre-existing knowledge. Exploratory study seeks
primary research from firsthand experience, whereas exploratory research heavily uses
secondary research. It takes a longer and more detailed look at information in a way that the
exploratory study couldn't, due to time constraints or to a limited breadth of interpretation.
The sampling technique to be used will be Convenience Sampling.
Convenience sampling is a type of non-probability sampling technique. Non-probability
sampling focuses on sampling techniques that are based on the judgement of the researcher. A
convenience sample is simply one where the units that are selected for inclusion in
the sample are the easiest to access. Whilst convenience sampling should be treated with
caution, its low cost and ease of use makes it the preferred choice for a significant proportion
of undergraduate and master’s level dissertations..
Sample size will be 60 for the survey.
DATA SOURCE
Since the project is based on collection of primary data, so in primary data collection, we collect
the data on our own using methods such as interviews and questionnaires. The key point here is
that the data you collect is unique to you and your research and, until you publish, no one else
has access to it.
There are many methods of collecting primary data and the main methods include:
• questionnaires
• interviews
• observation
All methods of data collection can supply quantitative data (numbers, statistics or financial) or
qualitative data (usually words or text). Quantitative data may often be presented in tabular or
graphical form.
Secondary data is data that has already been collected by someone else for a different purpose to
yours. For example, this could mean using:
• Journals
• Company Balance Sheets, etc
• METHODOLOGY USED FOR DATA ANALYSIS
Mean
The arithmetic mean, or simply the mean or average when the context is clear, is the central
tendency of a collection of numbers taken as the sum of the numbers divided by the size of the
collection. The collection is often the sample space of an experiment. The term "arithmetic
mean" is preferred in mathematics and statistics because it helps distinguish it from
other means such as the geometric and harmonic mean.
In addition to mathematics and statistics, the arithmetic mean is used frequently in fields such
as economics, sociology, and history, though it is used in almost every academic field to some
extent. For example, per capita GDP gives an approximation of the arithmetic average income of
a nation's population.
The mean of a sample or a population is computed by adding all of the observations and dividing
by the number of observations. Returning to the example of the five women, the mean weight
would equal (100 + 100 + 130 + 140 + 150)/5 = 620/5 = 124. In the general case, the mean can
be calculated, using one of the following equations:
Advantages
• Fast and easy to calculate
As the most basic measure in statistics, arithmetic average is very easy to calculate. For a small
data set, you can calculate the arithmetic mean quickly in your head or on a piece of paper.
In computer programs like Excel, the arithmetic average is always one of the most basic and best
known functions (in Excel the function is AVERAGE).
• Easy to work with and use in further analysis
Because its calculation is straight forward and its meaning known to everybody, arithmetic
average is also more comfortable to use as input to further analyses and calculations. When you
work in a team of more people, the others will much more likely be familiar with arithmetic
average than geometric average or mode.
Disadvantages
• Sensitive to extreme values
Arithmetic average is extremely sensitive to extreme values. Imagine a data set of 4, 5, 6, 7, and
8,578. The sum of the five numbers is 8,600 and the mean is 1,720 – which doesn’t tell us
anything useful about the level of the individual numbers. Therefore, arithmetic average is not
the best measure to use with data sets containing a few extreme values or with more dispersed
(volatile) data sets in general.
• Works only when all values are equally important
Arithmetic average treats all the individual observations equally. In finance and investing, you
often need to work with unequal weights. Different extreme values cannot be used appropriately.
Conclusion
Arithmetic average as a measure of central tendency is simple and easy to use. But in order to
take advantage of it and prevent it from doing any harm to your analysis and decision making,
you should be familiar with the situations when it fails and when other tools are more useful.
Standard Deviation
Standard deviation is a widely used measure of variability or diversity used
in statistics and probability theory. It shows how much variation or "dispersion" exists from the
average (mean, or expected value). A low standard deviation indicates that the data points tend to
be very close to the mean, whereas high standard deviation indicates that the data points are
spread out over a large range of values.
The standard deviation of a random variable, statistical population, data set, or probability
distribution is the square root of its variance. It is algebraically simpler though practically
less robust than the average absolute deviation. A useful property of standard deviation is that,
unlike variance, it is expressed in the same units as the data.
In addition to expressing the variability of a population, standard deviation is commonly used to
measure confidence in statistical conclusions.
When only a sample of data from a population is available, the population standard deviation can
be estimated by a modified quantity called the sample standard deviation.
Karl Pearson’s Coefficient of Correlation
In statistics, the Pearson product-moment correlation coefficient (sometimes referred to as
the PPMCC or PCCs, and typically denoted by r) is a measure of the correlation (linear
dependence) between two variables X and Y, giving a value between +1 and −1 inclusive. It is
widely used in the sciences as a measure of the strength of linear dependence between two
variables. It was developed by Karl Pearson from a similar but slightly different idea introduced
by Francis Galton in the 1880s. The correlation coefficient is also called "Pearson's r."
Pearson’s Coefficient computational formula
Interpretation
The correlation coefficient ranges from −1 to 1. A value of 1 implies that a linear equation
describes the relationship between X and Y perfectly, with all data points lying on a line for
which Y increases as X increases. A value of −1 implies that all data points lie on a line for
which Y decreases as X increases. A value of 0 implies that there is no linear correlation between
the variables.
More generally, note that (Xi − X) (Yi − Y) is positive if and only if X and Y lie on the same side of
their respective means. Thus the correlation coefficient is positive if X and Y tend to be
simultaneously greater than, or simultaneously less than, their respective means. The correlation
coefficient is negative if X and Y tend to lie on opposite sides of their respective means.
Bar chart
A bar chart or bar graph is a chart with rectangular bars with lengths proportional to the values
that they represent. The bars can be plotted vertically or horizontally.
Bar charts are used for marking clear data which has discrete values. Some examples of
discontinuous data include 'shoe size' or 'eye color', for which a bar chart is appropriate. In
contrast, some examples of continuous data would be 'height' or 'weight'. A bar chart is very
useful for recording certain information whether it is continuous or not continuous data. Bar
charts also look a lot like a histogram. They are often mistaken for each other.
The first bar graph appeared in the 1786 book The Commercial and Political Atlas, by William
Playfair (1759-1823). Playfair was a pioneer in the use of graphical displays and wrote
extensively about them.
Pie chart
A pie chart (or a circle graph) is a circular chart divided into sectors, illustrating proportion. In a
pie chart, the arc length of each sector, is proportional to the quantity it represents. When angles
are measured with 1 turn as unit then a number of percent is identified with the same number of
centiturns. Together, the sectors create a full disk. It is named for its resemblance to a pie which
has been sliced. The earliest known pie chart is generally credited to William Playfair's Statistical
Breviary of 1801.
The pie chart is perhaps the most widely used statistical chart in the business world and the mass
media. However, it has been criticized, and some recommend avoiding it, pointing out in
particular that it is difficult to compare different sections of a given pie chart, or to compare data
across different pie charts. Pie charts can be an effective way of displaying information in some
cases, in particular if the intent is to compare the size of a slice with the whole pie, rather than
comparing the slices among them. Pie charts work particularly well when the slices represent 25
to 50% of the data, but in general, other plots such as the bar chart or the dot plot, or non-
graphical methods such as tables, may be more adapted for representing certain information. It
also shows the frequency within certain groups of information.
• THEORITICAL DESCIPTION
It includes the tools used for analyzing the data. In this project Ms Excel 2007 has been used for
this purpose.
Microsoft Excel is a commercial spreadsheet application written and distributed
by Microsoft for Microsoft Windows and Mac OS X. It features calculation, graphing
tools, pivot tables, and a macro programming language called Visual Basic for Applications. It
has been a very widely applied spreadsheet for these platforms, especially since version 5 in
1993, and it has almost completely replaced Lotus 1-2-3 as the industry standard for
spreadsheets. Excel forms part of Microsoft Office. The current versions are 2010 for Microsoft
Windows and 2011 for Mac OS X.
Basic Operation
Microsoft Excel has the basic features of all spreadsheets, using a grid of cells arranged in
numbered rows and letter-named columns to organize data manipulations like arithmetic
operations. It has a battery of supplied functions to answer statistical, engineering and financial
needs. In addition, it can display data as line graphs, histograms and charts, and with a very
limited three-dimensional graphical display. It allows sectioning of data to view its dependencies
on various factors from different perspectives (using pivot tables and the scenario manager). And
it has a programming aspect, Visual Basic for Applications, allowing the user to employ a wide
variety of numerical methods, for example, for solving differential equations of mathematical
physics, and then reporting the results back to the spreadsheet. Finally, it has a variety of
interactive features allowing user interfaces that can completely hide the spreadsheet from the
user, so the spreadsheet presents itself as a so-called application, or decision support
system (DSS), via a custom-designed user interface, for example, a stock analyser, or in general,
as a design tool that asks the user questions and provides answers and reports. In a more
elaborate realization, an Excel application can automatically poll external databases and
measuring instruments using an update schedule, analyse the results, make a Word report
or Power Point slide show, and e-mail these presentations on a regular basis to a list of
participants. Microsoft allows for a number of optional command-line switches to control the
manner in which Excel starts
Chapter 3:
Data Presentation and Analysis
Personals Details
• Age
Particulars Yamaha FZ Bajaj Pulsar 150 cc
18-25 12 13
25-35 11 14
35-45 7 5
45 above 3 3
(Table1:Age)
(Figure1: Age)
Interpretation:-
As the data shows that more bike riders are of the age group of 18-25. It clearly shows that the
more customers opt for the bike of the age group 18-25 and 25-35 which covers in total of about
50% of the total share.
• Marital status
Particulars Yamaha FZ Bajaj Pulsar 150 cc
Single 16 19
Married 17 16
(Table2:Marital Status)
(Figure2: Marital Status)
Interpretation:-
The data in the bar diagram as well as table indicates that FZ is more preferred by married people
and Pulsar is more demanded by single.
• Occupation
Particulars Yamaha FZ Bajaj Pulsar 150 cc
Student 10 13
Service 17 14
Businessman 3 4
Self Employed 3 3
Others 0 1
(Table3:Occupation)
(Figure3: Occupation)
Interpretation :-
More of students and service people demand for the bikes, less the demand for the bikes by
businessman and self employed people.
• Income
Particulars Yamaha FZ Bajaj Pulsar 150 cc
10,000-20,000 1 1
20,000-30,000 1 2
30,000-40,000 10 12
40,000 above 11 7
(Table4: Income)
(Figure4: Income)
Interpretation:-
Income of an individual always an important role in its purchasing decision. More the income
more will be the choices available for the customer, less income less will be the availability of
alternatives for the individual.
• Which bike do you have?
Particulars Number of respondents Percentage of respondents
Yamaha FZ 35 50%
Bajaj Pulsar 150cc 35 50%
(Table5)
(Figure5)
Interpretation:-
Out of the 70 respondents, market survey is done on 35 respondents who opted for Yamaha FZ
and the other 35 opted for Bajaj Pulsar 150cc
• Since how long you have been using the bike?
Year Yamaha FZ Bajaj Pulsar 150cc
0-1 year 4 5
1-2 years 10 11
2-3 years 11 14
3 years or above 10 5
(Table6)
(Figure7)
Interpretation:-
The data shows the number of respondents opted for both Yamaha FZ and Bajaj Pulsar 150cc
have purchased the bike how many years ago.
• For what purpose do you use the bike?
Purpose Yamaha FZ Bajaj Pulsar 150cc
Office Purpose 9 11
Personal Purpose 13 14
Joy Purpose 12 9
Others 1 1
(Table7)
(Figure8)
Interpretation:-
The bar graph shows more of the customers having Bajaj Pulsar 150 cc use for office purpose
and personal purpose whereas FZ is opted by the customers for the joy purpose.
• What was the major factor that influenced you for the purchase of this bike?
Factor Yamaha FZ Bajaj Pulsar 150cc
Price 10 11
Goodwill/Brand Image 10 9
Looks 12 5
Mileage 3 10
Others 0 0
(Table8)
(Figure9)
Interpretation:-
More of the customer prefers price and looks factor while purchasing the bike. For the price ,
mileage factors customers prefer Bajaj Pulsar 150 cc whereas opts for FZ when think about
looks first and then price.
• From where do you get to know about the vehicle?
Information gathered from Yamaha FZ Bajaj Pulsar 150cc
Friends 22 17
Relatives 4 8
Television 2 7
Advertisements On Newspapers 7 2
Others 0 1
(Table9)
(Figure10)
Interpretation:-
More of the people go for friends when the questions come about form where does u come to
know about the vehicle. In this case also more of the customers for both the brands came to
know about the bike from their friends. Relatives, television, advertisement plays a secondary
role.
• Does advertisements influenced your decision of purchasing the bike?
Advertisements Yamaha FZ Bajaj Pulsar 150cc
Yes 27 25
No 8 10
Cant say 0 0
(Table10)
(Figure11)
Interpretation :-
Yes the advertisements always play an important role in influencing the purchase decision of the
customer. In this case also more of FZ customers are influenced by the advertisements. But
taking into consideration the data of Pulsar 150 cc also many customers or most customers were
influenced by the advertisement for the particular sector.
• Are you satisfied with the performance of the bike you are currently having?
Performance Yamaha FZ Bajaj Pulsar 150cc
Yes 29 30
No 6 5
Can’t say 0 0
(Table11)
(Figure12)
Interpretation:-
More of Pulsar customers as compared to FZ one’s are satisfied with the performance of the bike
which clearly indicates that pulsar has more satisfied customers in West Delhi as compared to
FZ.
• Were you satisfied by the offers/schemes provided by the company at the time of
purchase?
Services by company Yamaha FZ Bajaj Pulsar 150cc
Yes 20 22
No 15 13
Cant say 0 0
(Table12)
(Figure13)
Interpretation:-
The customers for both the companies are satisfied by the offers and schemes provided by the
company but Pulsar has the more number of satisfied customers in context of offers/schemes
provided by the company at the time of purchase. Also more of FZ customers are dissatisfied by
the services provided by the company at the time of purchase as compared to Pulsar.
• Were you satisfied with the after sales services provided by the dealer?
After sales services Yamaha FZ Bajaj Pulsar 150cc
Extremely Satisfied 3 7
Satisfied 13 15
Average Satisfied 11 8
Unsatisfied 6 5
Extremely Unsatisfied 2 5
(Table13)
(Figure14)
Interpretation :-
More of Pulsar customers are satisfied by the services provided by the dealer at the time of
purchase as compared to FZ customers.
• Are you satisfied by the number of service centers available in Delhi?
No. of Service Centres Yamaha FZ Bajaj Pulsar 150cc
Yes 19 28
No 16 7
Cant say 0 0
(Table14)
(Figure15)
Interpretation:-
Here, the data shows that number of availability of service centers of Pulsar are more that is why
the customers of Pulsar are more satisfied in this case than the FZ customers.
• If new bike with good feature comes in, then would you like to change your bike?
New Bike Yamaha FZ Bajaj Pulsar 150cc
Yes 30 26
No 5 9
Cant say 0 0
(Table15)
(Figure16)
Interpretation :-
More of FZ customers are ready to purchase a another bike with some good features come in the
market as compared to the Pulsar customers.
• Would to recommend others to purchase this bike ?
Recommendation Yamaha FZ Bajaj Pulsar 150cc
Yes 30 30
No 5 5
Can’t say 0 0
(Table16)
(Figure18)
Interpretation:-
The most ironic answer would be the customers of both the brands would like to recommend
others to purchase the bike and same number of customers is dissatisfied by the performance that
is why they do not recommend their brand to others.
CORRELATION
S.No. X Y XY X² Y²
1 0 3 0 0 9
2 0 1 0 0 1
3 4 2 8 16 4
4 1 1 1 1 1
5 3 2 6 9 4
6 3 1 3 9 1
7 4 4 16 16 16
8 3 1 3 9 1
9 0 2 0 0 4
10 0 1 0 0 1
11 4 1 4 16 1
12 4 3 12 16 9
13 0 2 0 0 4
14 4 2 8 16 4
15 4 2 8 16 4
16 2 4 8 4 16
17 3 4 12 9 16
18 4 3 12 16 9
19 0 4 0 0 16
20 0 1 0 0 1
21 4 2 8 16 4
22 0 1 0 0 1
23 3 2 6 9 4
24 0 3 0 0 9
25 0 1 0 0 1
26 3 4 12 9 16
27 0 2 0 0 4
28 3 4 12 9 16
29 0 3 0 0 9
30 3 1 3 9 1
31 3 2 6 9 4
32 3 1 3 9 1
33 3 4 12 9 16
34 0 3 0 0 9
35 0 2 0 0 4
36 3 1 3 9 1
37 2 3 6 4 9
38 0 2 0 0 4
39 3 2 6 9 4
40 2 3 6 4 9
41 4 1 4 16 1
42 3 1 3 9 1
43 3 1 3 9 1
44 3 4 12 9 16
45 4 2 8 16 4
46 4 2 8 16 4
47 4 3 12 16 9
48 0 3 0 0 9
49 3 2 6 9 4
50 4 2 8 16 4
51 3 3 9 9 9
52 4 2 8 16 4
53 3 3 9 9 9
54 0 1 0 0 1
55 4 1 4 16 1
56 1 2 2 1 4
57 3 1 3 9 1
58 0 2 0 0 4
59 4 3 12 16 9
60 0 2 0 0 4
61 3 1 3 1 9
62 4 3 12 16 9
63 0 1 0 0 1
64 0 4 0 0 16
65 0 3 0 0 9
66 4 4 16 16 16
67 4 1 4 16 1
68 2 1 2 4 1
69 3 3 9 9 9
70 3 2 6 9 4
N=70 ∑X=151 ∑Y=154 ∑XY=347 ∑X²=521 ∑Y²=422
(Table17:Correlation)
R = 14.8 / 127.47
R = 0.1
Interpretation:
The correlation coefficient ranges from −1 to 1. A value of 1 implies that a linear equation
describes the relationship between X and Y perfectly, with all data points lying on a line for
which Y increases as X increases. A value of −1 implies that all data points lie on a line for
which Y decreases as X increases. A value of 0 implies that there is no linear correlation between
the variables.
Since, R = 0.1 it’s a positive point which directly means the factors i.e. income of an individual
affects its purchase decision. If the income of the person is more he/she will concentrate more on
mileage and comfort, if the income of the person is less he will concentrate more on price
factors. Income of the person and its purchasing power are directly related to each other.
Chapter-IV:Summary & Conclusions
• RESULTS OF THE STUDY
During this research project I came in contact with many customers who are having bikes. It has
been found that mostly the bike is preferred by the teenagers and the persons at the age group of
25-35 prefer bike because of their office use. Many a factors are kept in mind while doing a
purchase decision. Everything side by side matters i.e. price, mileage, fuel efficiency, looks,
comfort etc and on the other side people who do purchase decision search for the entire possible
alternative available in the market. They search for the positive and negative points while doing
the purchase decision. Taking into consideration all the aspects that I covered in my research i.e.
questionnaires form the demographic factors to the recommendation of the bike to other
customers , I came to know about some really exciting facts and figures which I will be
discussing below :::
Bikes are mostly preferred by the people at the age of 18-25 and 25-35 which is around 80% in
total. The demand for bike is most like by the people who are single. Also another major
influencing thing while considering the demographic factors another factors are income of the
person nad the occupation of the person. More of the customers having an income of about
30,000-40,000 opt for bike and more of the students and service people use the bike for their
daily use. Around 85% in total of students and service people opt for bikes in their daily usage.
Now, Moving in to the questionnaires meant to know the satisfaction level of the customers
regarding the bikes are discussed below:::
The customers using the bike for more than 2 years may come to know better as compared to
those who have purchased it recently. The Customers who have the bike for a long period of time
can tell the advantages or disadvantages in the factors more clearly as compared to the customers
who purchased it recently. The customers purchase the bike mostly for personal and office use
for which they mainly seek towards the main factor price and goodwill in the market which
effects the purchase decision of the customer in context of doing the purchase behavior. Another
factor that comes in mind while performing the purchase decision would be the opinions of the
friends of that particular bike. Other’s suggestions and recommendations are also taken into
consideration while making the purchasing decision, another more factor in this context is
advertisement which helps an individual to change or accept the purchase decision.
After doing the purchase decision the next thing is to purchase the bike in which the performance
of the bike is measured. More of Pulsar customers are satisfied by the performance of the bike
they are currently having and also the after sales services provided by the company Bajaj are
more efficient than Yamaha FZ
The number of service centers available in West Delhi is more for Pulsar and less in FZ bike.
On the whole in some points of Yamaha FZ is more powerful and in some questionnaires points
of Pulsar are powerful. This clearly indicates that some of the factors of both the bikes are most
powerful ones like Pulsar service centers and performance and for Yamaha FZ looks and price
are powerful factors.
• LIMITATIONS OF THE STUDY
• Reliability of the Data
The value of any research findings critically on the accuracy of the data collected. Data
quality depends on the accuracy of the data collected. Sometimes the interviewees may give
false data which leads to inaccuracy in the data collected.
• Biasness
Some customers many a times answer biasness to the questions asked by the interviewer
which leads to inappropriate research work.
• Costly
Collection of primary data is costly as compared to using secondary data.
• SUGGESTIONS AND SCOPE FOR FURTHER STUDY
• Bajaj Pulsar 150 cc needs to be powerful in terms of price, looks and mileage.
• More of service centers need to be opened in West Delhi area so that customer finds it
easy for servicing.
• Grievance handling mechanism needs to be strengthened of Yamaha Group.