Professional Luminaires Lighting Solutions
Industrial Lighting & Area Lighting Catalogue 2016
LP/Z
HLR
C00
017/
/MA
R15
/OC
T15
Regional & BRanch offices:
noRTh - Regional office: corporate office: QRG Towers, 2D, Sector-126, Expressway, Noida-201304, Tel: 0120-3331000, Delhi: Tel: 011-47676700, 23888200, chandigarh: Tel: 0172-4232400-401, Dehradun: Tel: 0135-6670202, noida / haryana: Tel: 0120-3331000, ludhiana: Tel: 0161-4676000 / 24, Jammu: Tel: 0191-2478330, 2479330, sri nagar: Tel: 0194-2490431, Jaipur: Tel: 0141-3914645, 3988210 Jodhpur: Tel: 0291-9214201640 / 45, lucknow: Tel: 0522-6672100, Kanpur: Tel: 0512-6710400, 6710409
easT - Regional office: Kolkata: ICC Tower, 5th Floor, 4 India Exchange Place, Kolkata-700001, Tel: 033-40129851 / 52, Bhubaneshwar: Tel: 0674-6668101/102/103/104, guwahati: Tel: 0361-2134521, 2458923, 2460355, siliguri: Tel: 0353-2525907, Ranchi: 0651-2244861, 2244862, 2244864, 2244868, 2244869, Jamshedpur: Tel: 0657-6542492, 09234369436, Patna: Tel: 0612-2207221, 2207222, 2207223, 2655518
WesT - Regional office: Mumbai: 301, Everest House, 3rd Floor, 6, Suren Road, Chakala, Andheri (E). Mumbai - 400 093, Tel: 022-67298600-602, ahmedabad: Tel: 079-40061111, 40060738-740, indore: Tel: 0731-2572340-41, 4009998 (Airtel), Rajkot: Tel: 0281-2481112, 2921212, nagpur: Tel: 0712-2240932, 2242692, 2242699 Pune: Tel: 020-64016413 / 14, Raipur: Tel: 0771-4243400 / 01, surat: Tel: 0261-2350137, 9979890137, Jabalpur: Tel: 0761-4064491
soUTh - Regional office: chennai: Sigapi Achi Building, No. 18 / 3, 6th Floor, Rukmani Lakshmipathy Road, Egmore, Chennai-600008, Tel: 044-42280600, 605, Bangalore: Tel: 080-49075000, coimbatore: Tel: 0422-2305767, 2306199, 2305199, hyderabad: Tel: 040-27533372, 27533355, 27533632, 66320407/0408/6401/6402, Kochi: Tel: 0484-4099000, Vishakapatnam: Tel: 0891-6514339, Vizag: Tel: 0891-6514339, Vijayawada: Tel: 91+9247058847/57, calicut: 4954019194, Madurai: 09994493242, Trivandrum: 4714015323, hubli: 09448146028, Trichy: 09944460160
Representative Offices: • Goa • Solapur • Gwalior • Kathmandu • Bhopal
Although every effort has been made to ensure accuracy in the compilation of the technical detail within this publication,however current details should therefore be checked with Havells Group. Specifications & performance data are constantly changing.
Industrial Lighting &
Area Lighting C
atalogue 2015
havells india ltd. QRG Towers, 2D, Sector -126, Expressway, Noida - 201 304 (UP), Ph. +91-120-3331000,E-mail: [email protected], www.havells.comConsumer Care No.: 1800 11 0303, 1800 103 1313 (All Connections), 011-4166 0303 (Landline)Join us on Facebook at www.facebook.com/havells and share your ways to save the planet!
CIN - L31900DL1983PLC016304.
Pole Diagram for SOLAR street light:
LED
Controller
Highly effecient controller to charge yourbatter ies & microcontroler control led a lgor i thms for l ight management to ensure maximum uptime. Microcontroller managed algorithms autonomously determinesunrise & sunset.
Only Tier 1 make poly crystalline siliconsolar panels with high efficiency & longlifetime area used.
High Lumen LED modules for maximum efficacy with lifetime > 50,000 hrs & CRI nominal 70.Pressure Die cast Aluminium IP66 enclosure offer excellent water-proofing & humidity barrier.
Specific deep discharge batteries are used to store the energy, provide energy for immediate requirements, and enable a back-up for days when there is little or no sun.
Brighten your Worldwith Havells LED
We are now in SOLAR street light.
Benefits of solar LED street lights 1. Fully Renewable and Independent Energy source.
2. Zero Carbon foot prints.
3. Easy to Install. Instant installation and ready to use.
4. No External cabling,Trenching required i.e eliminates the chance of accident due to electric shocks, No trenching & wiring.
5. Ideal solution for Rural and remote areas where power lines are not available.
6. Independent of Grid , the operational costs are minimum.
7. Green technology.
8. No maintenance in initial years
9. Immediate Returns on Investment.
Solar Street light systemA LED based solar street lighting system
consists of a PV Module, control electronics,
battery, and LED based luminaries, all suitably
mounted on a pole. The battery is charged by
electricity generated through the PV module
during day time and the luminaries provides
light from dusk to dawn.
Applications• Street Lighting
• Perimeter Security Lighting
• Park Lighting
• Campus Lighting
• Pathway Lighting
• Remote Area Lighting
• Farm Lighting
• Ship Dock Lighting
• Railway Yard Lighting
Why Havells Solar LED Luminaire
Havells LED Luminaries delivers the best in class lumen efficacy. They deliver the maximum light output (lumens) at the lower wattage .
About MPPT
Havells LED street lighting systems are designed with MPPT (Maximum Power Point Tracking) which provides about 25% more efficiency by utilizing maximum energy harvested by solar PV modules.
About Solar PV module
Highly efficient poly crystalline solar modules are used which are tested for longer durability & manufactured with innovative technologies. These modules are designed to withstand highly corrosive atmospheres and heavy wind loads. Also the modules are certified for industry standards IEC61215,IEC61730( safety class 1 & 11), IEC61701 and CE.
Product Offerings.1. Standard systems ( this is offered with Preset specification with various wattages to suit,
Specs of Govt., private and PSU’s)
2. Customized solutions can be offered with one to one meeting with end user.
3. Hybrid system which would operate on AC ( alternate current, i.e in presence of GRID supply and DC ( Direct current in ABSENCE of grid supply) it would work in Either Circumstances.
Havells – Lighting up the wayHavells India Limited is a USD 1.4 billion Indian multinational company. Havells is also the 4th
largest lighting company of the world. The company owns a large product portfolio in consumer
and professional lighting, and caters to indoor, outdoor and specialty lighting segments.
Havells’ strength is its manufacturing capability. Havells is the only company in India that
manufactures its entire lighting product portfolio in-house. The company has established a state-
of-the-art, technologically advanced manufacturing plant at Neemrana, Rajasthan to manufacture
luminaires and fixtures. The ultra-modern manufacturing plant is a replica of Havells manufacturing
in France, and contains sophisticated processes like robotic box bending machines. Supported
by German, Italian and Japanese technology, the colossal manufacturing unit is spread over 2
lakh square feet, and churns out 5 million CFLs every month.
Havells lighting business is strongly supported by its dealership network of over 20,000 across
the world. In 2007, the company made history by acquiring the legacy European lighting brand
‘Sylvania’. The acquisition strengthened Havells lighting in the global markets.
1
LED : Light Emitting DiodeLEDs are miniature Light Sources made of semi-conductor material. They work on the basic principle of a p-n junction diode. When appropriate DC voltage is applied to it, the diode is forward biased (on), the electrons are able to recombine with holes and energy is released in the form of light.This effect is called electro luminescence and color of light is determined by the energy gap of the semiconductor.
LED Lamp:A LED lamp (also called LED bar or Illuminator) is a type of solid state lighting (SSL) that uses light-emitting diodes (LEDs) as the source of light. They usually comprise clusters of LEDs in a suitable housing. LEDs by nature emit light in a very small focused wavelength range that is characteristic to the energy band gap of the semiconductor. In order to overcome this, two primary methods of creating white light from LEDs are being used, Red-Green-Blue LEDs and phosphor converted LEDs.
Why LED:Lower Energy ConsumptionLonger LifetimeImproved RobustnessSmaller Size
Instant Start: LEDs are ideal for use in applications that are subject to frequent on-off cycling, unlike fluorescent lamps that burn out more quickly when cycled frequently or HID lamps that require a long time before restarting. LEDs are easily dimmable.
Environment Friendly - Does not Contain Mercury.Solid package of LED can be designed to focus its light. Incandescent and Fluorescent sources require external reflector for the same. Reduced CO2 emission
LEDs are shock resistant being solid state components.
Applications:• Generallighting• Lowenergyindicators• Signage• AutomotiveLighting• TrafficLights• TextandVideoDisplays.• StreetLights• LEDTelevision• Communication• Sensors• LightMatterInteraction
Havells - Alwar
Havells - Baddi
Havells - Neemrana
Manufacturing
Plants
Havells Sylvania - Germany
Havells Sylvania - Colombia
Havells Sylvania - Brazil
P r o d u c t I n d e x
Industrial Lighting
Titania LED Tubelight Page 8-9
Titania PRO LED Tubelight Page 10-11
Regal Batten LED Page 12-13
Magnum LED 24W Page 14-15
Endura Magnum 20W & 40W Page 16-17
Endura Well Glass Neo Page 18-19
Endura Highbrite Page 20-21
Endura Bay Brite Page 22-23
Endura Bay Brite Neo Page 24-25
Batten EZ T5 Page 26-27
Regal Batten T5 Page 28-29
EnergyEfficient T5 Reagl Batten Page 30-31
Regal Batten T5 PCR/ALR Page 32-33
Regal Batten T8 Neo Page 34-35
Regal Batten Page 38-39
Regal Batten PCR/ALR Page 40-41
ProdigyPage 42-43
Prodigy Ultra Page 44-45
Regal Batten T8 EZ Page 36-37
Batten Super T5 Page 46-47
HB/MB NI with Al. Reflector (Open) Page 58-59
Magnum 1 Page 48-49
HB/MB NI with Al. Reflector (Closed) Page 60-61
Magnum 2 Page 50-51
Chandelier Seal Beam I Page 62-63
VPF1NI Page 52-53
Highbay Neo with Neck Reflector Page 64-65
VPF1NewPage 54-55
Uro Bay (Open) Page 66-67
VPF2Premium Page 56-57
Uro Bay (Enclosed) Page 68-69
T5 Highbay (Enclosed) Page 70-71
Jeta Neo 30 & 50 Page 74-75
Jeta Linear Page 76-77
Jeta Neo 120/150 Page 78-79
Jeta Pro 200/240/300 Page 80-81
Jeta Mini Page 82-83
Jeta 1 Page 84-85
Area Lighting
Jeta 2 Page 86-87
Jeta 6 RO IP66 Page 90-91
Jeta 6 New Page 92-93
Ranger 1 New NI Page 94-95
Jeta Axial Page 96-97
Jeta 3 New Page 88-89
Ranger 2 NI Page 98-99
Ranger 2 Oval NI Page 100-101
Beam Page 102-103
Professional Industrial Lighting
8
Titania LED TubelightUltra bright LED Tubelight (single side connection) with very high efficacy suited forinstallation in existing tubelight G13 lamp holders to give glare free light.
Benefits• Delivershighbrightness&excellent illumination• ExtraordinarylonglifeofLED’s(over 35,000 burning hrs.) & long lasting LED driver ensures zero maintenance• Environmentfriendlyasitdoesnot contain Mercury• Instantlight• NoUVradiation• ExcellentCRI>80• OperatingTemp.range: –10°C to +50°C
Housing & FinishElegantly designed aluminium heat sink forefficientheatdissipationmatedwithhighefficacypolycarbonatediffuserto provide glare free uniform light distribution.
System efficacyBestinclassefficacy>100 Lm/W which translates into low power consumption and high brighness.
Control gearInbuilt electronic driver (SMPS based constant current supply). THD <20%.
MountingPerfectlyfitsintoexisting1200mmT8Fluorescenttubelightfixtures.
Applications•Corporateoffices•ShoppingMalls•Restaurants•Hotels•EducationalLighting•Parkings
Product Specifications
9
Technical Data
Technical Drawing
A
B
26±
1
28±
1
13Side View
Front View
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
LampSocket
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHEYBWP7IG1S010 10W 240 0.060 G 13 >0.90 6500K >100
LHLDCLXNUK7Z016 16W 240 0.080 G 13 >0.90 6500K >100
LHLDCLXNUJ7Z018 18W 240 0.090 G 13 >0.90 6500K >100
LHLDCLXNUJ7Z020 20W 240 0.100 G 13 >0.90 6500K >100
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
All dimensions are in mm
System Power Length (A) Length (B)
10W 604±2 590±2
16/18/20W 1215±2 1200±2
10
Titania PRO LED TubelightUltrabrightLEDTubelight(oppositesideconnections)withveryhighefficacysuitedforinstallation in existing tubelight G13 lamp holders to give glare free light.
Benefits• Delivershighbrightness&excellent illumination• ExtraordinarylonglifeofLED’s(over 35,000 burning hrs.) & long lasting LED driver ensures zero maintenance• Environmentfriendlyasitdoesnot contain Mercury• Instantlight• NoUVradiation• ExcellentCRI>80• OperatingTemp.range: –10°C to +50°C
Housing & FinishElegantly designed aluminium heat sink forefficientheatdissipationmatedwithhighefficacypolycarbonatediffuserto provide glare free uniform light distribution.
System efficacyBestinclassefficacy>100 Lm/W which translates into low power consumption and high brighness.
Control gearInbuilt electronic driver (SMPS based constant current supply). THD<15%.
MountingCanbefixeddirectlyintotheexistingT8/T12FTLconventionalfixtures(withelectromagnetic ballast) after removing the starter &newfixturecanbemanagedaccordingly.
Applications•Corporateoffices•ShoppingMalls•Restaurants•Hotels•EducationalLighting•Parkings
Product Specifications
11
Technical Data
Technical Drawing
All dimensions are in mm
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
LampSocket
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHLDDBXEUL7Z018 18W 240 0.090 G 13 >0.90 6500K >100
LHLDDBXEUL7Z020 20W 240 0.100 G 13 >0.90 6500K >100
Front View
1213±2
1200
12.5
24
28.5
2931.5
Side View
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
12
Regal Batten LEDGeneral purpose industrial compact batten suitable for single Endura Tube Light.
HousingHousing & cover made up of CRCA sheetsteel.Coverisfixedtothehousingby means of 2 nos. bolt with engineering plastic head.
FinishEpoxy powder coated white after phosphochromate treatment.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with lamp holder to terminal block & for more information refer to*Endura Tube Light Data Sheet (Supply connection on opposite side).#Endura Tube Light Data Sheet (Supply connection on one side).
MountingOn ceiling/ wall with screws at a distance of 900 mm, suspend by 2 nos. Ø19 mm conduit pipe at a distance of 600 mm or with chains at a distance of 700 mm.
Applications•Schools•Lobbies•Residences•Industrialbays•Railwayplatforms•Godowns/garages
Product Specifications
13
Technical Data
Technical Drawing
All dimensions are in mm
900
Front View1224±2
Side View38±1
68±
1
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
Colour Temp. (CCT)
LHFYBWP1TB1W020* 1x18/22W LED T8 240 - G 13 - -
LHFYBYPNIA1W022# 1x18/22W LED T8 240 - G 13 - -
For electrical parameters refer to Endura Tube Light data sheet.
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpoints of installations are not provided with proper Earthing.
14
Magnum LED 24WEnergy saving, environmental friendly, long life, corrosion resistant, impact proof, surface mountingluminairewithPChousinginopalfinishsuitableforwetlocationwithLEDsaslight source.
Benefits• Highefficacy&lowerpower consumption• Delivershighbrightness&excellent illumination even in high ceiling areas • ExtraordinarylonglifeofLED’s(over 50,000 burning hrs.) & long life of high end electronic driver (over 30,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• Instantlightwithlowrunning temperatures
HousingMade up of corrosion resistant round shaped unbreakable polycarbonate bodyinopalfinishforglarefreelightdistribution.
End capsWhite coloured ABS clamps on which snapfitSSmountingclampcanbefixed& white coloured ABS end caps are screwed on this clamp.
OpticsReflector made of LEF sheet which is pasted on Al. sheet (heat sink) on both sides of LED strip to enhance the lumen outputofthefixture.
Electronic driverPowered by an in-built electronic driver (SMPS based constant current supply) with THD<33%.
MountingOn ceiling/ wall through 2 nos. slots usingSSclampsprovidedwithfixture.
Applications•Batteryrooms•Coldstorage•Chemicalfactories•Undergroundparkings•Thermalpowerstations
Product Specifications
15
All dimensions are in mm
Technical Drawing
Technical Data
1200
34
1227
53
1083Top View
Ø 43Side View
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHFKAWN7UC8W024 24W 240 0.110 >0.90 6000K >85
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
16
Endura Magnum 20W & 40WEnergy saving, environmental friendly, long life, corrosion resistant, impact proof, surface mountingluminairewithPChousing&opalfinishcoversuitableforwetlocationwithLEDsas light source.
Benefits• Highefficacy(>90lm/W)&lower power consumption• Delivershighbrightness&excellent illumination even in high ceiling areas• ExtraordinarylonglifeofLED’s(over 50,000 burning hrs.) & long life of high end electronic driver (over 30,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• Instantlightwithlowrunning temperatures
HousingMade up of corrosion resistant unbreakable polycarbonate body.
CoverHigh quality polycarbonate diffuser in opalfinishforglarefreeuniformlightdistribution,fixedtothehousingwithSSsnapfitclamps.
LampHighefficiencylonglifeLEDchipwithRa>70,lumenefficacy>125 lm/W & view angle 120°.
OpticsReflector made of LEF sheet which is pasted on Al. sheet (heat sink) to enhancethelumenoutputofthefixture.
Electronic driverPowered by an in-built electronic driver (SMPS based constant current supply) with THD<15%.
MountingOn ceiling/ wall through 2 nos. slots using SS clamps & screws provided with fixture.
Applications•Batteryrooms•Chillingplants•Chemicalfactories•Undergroundparkings•Thermalpowerstations
Product Specifications
17
All dimensions are in mm
System Power Length (L) Width (W) Height (H) D No. of Toggles
20W 605±2 88±2 72±2 248 8
40W 1205±2 88±2 72±2 835 14
Technical Drawing
Technical Data
Top View
LFront View
Side View
DH
W
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHEKAWN7PZ6J020 20W 240 0.100 >0.90 6000K >95
LHEKAWN7IZ6J040 40W 240 0.185 >0.90 6000K >90
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
18
Endura Well Glass NeoEnvironmental friendly, energy saving long life corrosion resistant, vertical mounting pressure diecast aluminium well glass luminaires with high power COB LED as light source.
Benefits• Highefficacy&lowerpower consumption• Delivershighbrightness&excellent illumination• ExtraordinarylonglifeofLED’s(over 50,000 burning hrs.) & long life of high end electronic driver (over 30,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• Instantlightwithlowrunning temperatures• Operatingtemp.range: -20°C to +50°C.
HousingPressure die-cast aluminum alloy LM24 housing (heat sink) for effective thermal management, sturdiness & excellent corrosion resistant. 2 nos. cable gland PG11 is provided at cable entry for maintaining Ingress protection and for providing loopin & loop-out facility.
CoverHigh quality polycarbonate diffuser in opalfinishforglarefreelightdistributionfixedtothehousingwith5nos.SSscrews.
LampHighefficiencylonglifeCOBLEDchipwith Ra>70,lumenefficacy>120 lm/W & view angle of 120° to ensure better light distribution.
FinishEpoxy powder coated after phosphochromate treatment in metallic silverfinish.
Control gearIn built integral electronic driver with APFC, THD<10%.
Mounting• Canbesuspendedbyheavydutyeye- bolthookprovidedwiththefixture.• Grubscrewisprovidedfor locking the mounting eye-bolt.
Applications•Industrialbays•Cementfactories•Oilprocesslocations•Mediumindustrialunits
Product Specifications
19
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHEMABNDPN6S024 24W 240 0.110 >0.95 5000K >95
LHEMABNDPN7S040 40W 240 0.180 >0.95 5000K >85
Technical Data
Technical Drawing
All dimensions are in mm
Driver code: LSSLOX0086 for 24W, LSSLOX0063 or 40W.
Ø170±2
Top View12
8±2
Front View
214±
2 254±
2
ID 17.5
Ø132
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
20
Endura HighbriteEnergy saving, environment friendly & robust open type vertical Highbay/Mediumbay LED luminaire with high power COB LED as light source.
Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• Delivershighbrightness&excellent illumination• ExtraordinarylonglifeofLED’s(over 50,000 burning hrs.) & long life high end electronic driver ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• Instantlightwithlowrunning temperatures• Operatingtemp.range: -10°C to +50°C
HousingExtruded aluminium housing (heat sink)forefficientthermalmanagement,
sturdiness & excellent corrosion resistant. Pressure die-cast aluminium housing (ADC12/LM24) for control-gear (Breather port is provided in Control Gear for 150W). PG7 gland is used for cable entry for maintaining ingress protection.
FinishControl Gear housing is epoxy powder coated black after phosphochromate treatment whereas heat sink is anodised inblackfinish.
LampHighefficiencylonglifeCOBLEDwityRa>70andlumenefficacyof120lm/Wwith view angle of 120° to ensure better uniformity of light distribution.
OpticsAluminium spun reflector sand blasted from inside and electrochemically
brightened.Glass lens over COB for uniform distribution & comfortable lighting with beam angle of 90°.
Electronic driverPowered by an in built, replaceable electronic driver (SMPS based constant current supply) with THD<10%.
MountingSuspended by means of heavy duty aluminium die-cast eye-bolt provided withthefixture.Screwisalsoprovidedinthe casting to lock the eye-bolt.
Applications•Cement&steelplants•Warehouses•Factories&assemblylines•Tollplazas
Product Specifications
21
Technical Drawing
Technical Data
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHELAWUDPC5K050 50W 240 0.230 >0.90 5000K >104
LHELAWUDUC6K090 90W 240 0.400 >0.95 5000K >110
LHELAWUDPC5K150 150W 240 0.650 >0.95 6500K >104
All dimensions are in mm
System Power Total Ø (A) Total Height (B) Heat Sink Height (C)
50W 362±2 352±2 82±2
90W 447±2 490±2 180±2
150W 518±2 580±2 280±2
Driver code: LHGDKDDFGRB1050 for 50W, LHGDADDHGRCL090 for 90W, LHGDNDFHFSBL150 for 150W.
A
4 Nos. mounting holes of Ø 5 at PCD of 90 mm for mounting refelector
Top View
Cable glandPG 7
B
C
Ø36
Front View
IP54 for optical compartment, IP65 for control gear compartment.
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
22
Endura Bay BriteEnergy saving, environmental friendly, long life, exclusive innovative pressure die-cast aluminium Bay light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces.
Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hrs.) & long lasting LED driver (upto 35,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain mercury • OperatingTemp.range: -10°C to +45°C• Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional lighting systems
Housing & FinishEpoxy powder coated pressure die-cast aluminium housing (ADC2/LM24) in greyfinishwithelegantlydesignedheatsinkforefficientthermalmanagement,sturdiness & excellent corrosion resistant. Cable gland PG7 for 80W & PG9 for 150W is provided at cable entry for maintaining ingress protection.
CoverHighqualitytoughenedglassfixedtohousing with 10 nos. SS screws.
LampHighefficiencylonglifeLEDchipsinmodule with Ra>70&lumenefficacyof 130 lm/W with PMMA modular lens plate of beam angle 90º to ensure better uniformity of light distribution.
Electronic driverIn-built, replaceable electronic driver (2 nos.) with APFC, THD<15%.
MountingWall or surface mounting using adjustable MS bracket of thickness 3mmprovidedwiththefixtureby2elliptical slots of Ø 12.0 mm at a distance of 148 mm & 5 holes of Ø 10.0 mm at CD of 49.5 mm.Allen bolt is provided for angle adjustment.
Applications•Signboards•Building&monuments•Billboard•Shopboard•Petroliumcanopy
Product Specifications
23
System Power Length (L) Width (W) Height (H) No. of LED Mounting CD
80W/90W 403±2 232±2 217±2 36 Ø 10 at 148mm
120W 514±2 291±2 236±2 48 Ø 10 at 49.5mm (5 Holes)
150W 514±2 291±2 236±2 64 Ø 10 at 49.5mm (5 Holes)
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHEPCOU7IN7J080 80W 240 0.400 >0.95 6000K >100
LHELAWU7PN7J090 90W 240 0.400 >0.95 6000K >90
LHELAWU7IN7J120 120W 240 0.530 >0.95 6000K >85
LHECPCZU7IN7J150 150W 240 0.630 >0.95 6000K >95
Technical Data
Technical Drawing
Driver code: LHGDPDFHFRBL090 for 80/90W, LHGDPDDGESBL120 for 120W, LHGDPDFHESBL150 for 150W.
WBottom View
CD
Front View
H
Side ViewL
All dimensions are in mm
MountingFrameCodeforEnduraBayBrite80W/90W:LSSLOG0004.
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
24
Endura Bay Brite NeoEnergy saving, environmental friendly, long life, exclusive innovative pressure die-cast aluminium Bay light with 40 high power LEDs as light source, suitable for highlighting architectural features or retail spaces.
Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hours) & long lasting LED driver (upto 35,000 burning hours) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain mercury • OperatingTemp.range: -10°C to +45°C• Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional lighting systems
Housing & FinishEpoxy powder coated pressure die-cast aluminium housing (ADC2/LM24) in greyfinishwithelegantlydesignedheatsinkforefficientthermalmanagement,sturdiness & excellent corrosion resistant. Cable gland PG7 is provided at cable entry for maintaining ingress protection.
CoverHighqualitytoughenedglassfixedtohousing with 10 nos. SS screws.
LampHighefficiencylonglifeLEDchips(Cree/Nichia) in module with Ra>70 & lumenefficacyof130lm/WwithPMMAmodular lens plate of beam angle 90º to ensure better uniformity of light distribution.
Electronic driverIn-built, replaceable electronic driver with APFC, THD<10%.
MountingWall or surface mounting using adjustable MS bracket of thickness 3mmprovidedwiththefixtureby2elliptical slots of Ø 12.0 mm at a distance of 148 mm. Allen bolt is provided for angle adjustment.
Applications•Signboards•Building&monuments•Billboard•Shopboard•Petroleumcanopy
Product Specifications
25
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHELAWU7IN7J090 90W 240 0.400 >0.95 6000K >95
Technical Data
Technical Drawing
MountingFrameCodeforEnduraBayBrite80W/90W:LSSLOG0004.
Driver code: LHGDPDFHFRBL090.
All dimensions are in mm
232±
2
1482 Elliptical HoleØ12x61 mmØ14
Bottom View
212±
2
35
Side ViewFront View403±2
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
26
Batten EZ T5Decorative ultra slim box fixture with Industrial electronic ballast suitable for single14W/28W linear fluorescent lamp for Industries/ indoor application only.
HousingMade up of ultra slim CRCA sheet steel.
FinishEpoxy coated white after phosphochromate treatment.
End capsBlue colour clip-on end caps provided as standard.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gear*Pre-wiredwith240Vratedhighfrequency HPF electronic ballast, THD <33% upto terminal block, packed in gift box.
MountingOn ceiling/ wall with screws or suspend by stainless steel suspension wire.
Applications•Residences•Cleanrooms•Covelighting•Hospitalpremises•Conferencerooms
Product Specifications
27
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFYBYF1OA1W014 1x14W T5 FTL 240 0.070 G 5 >0.90
LHIT81128032* 1x28W T5 FTL 240 0.140 G 5 >0.95
Technical Data
Technical Drawing
Lamp Type Length (L) Width (W) Height (H)
1x14W T5 FTL 600±1 23±1 45±1
1x28W T5 FTL 1200±1 23±1 45±1
All dimensions are in mm
Electronic Ballast:1x28W T5 FTLItem Code: LHBT03128032Vin; 240V, 50Hz, 0.140A, P.F.-0.95
T5 Ez LAMP
P
N
L
Top View
H
Side View
Front ViewW
28
Regal Batten T5General purpose industrial compact batten suitable for 28W/54W (T5 FTL) single and twin linear fluorescent lamps.
HousingHousing & cover made up of CRCA sheetsteel.Coverisfixedtothehousingby means of 2 nos. bolt with engineering plastic head.
FinishEpoxy powder coated white after phosphochromate treatment.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with high performance electronic ballast (THD<33%) as a standard.
MountingOn ceiling/ wall with screws at a distance of 900 mm, suspend by 2 nos. Ø19 mm conduit pipe at a distance of 600 mm or with chains at a distance of 700 mm.
Applications•Schools•Industrialbays•Railwayplatforms•Godowns/garages•Assemblybenches
Product Specifications
29
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFYBYF1ON1W028* 1x28W T5 FTL 240 0.140 G 5 >0.95
LHFYBYF2ON1W028 2x28W T5 FTL 240 0.280 G 5 >0.95
LHFYBYF1IN1W054 1x54W T5 FTL 240 0.230 G 5 >0.95
Technical Data
Technical Drawing
All dimensions are in mm
*With Olympian Sleek electronic ballast. Item code - LHBT02128032.
900
Front View1174±2
Side View38±1
70±
1
T5 1x28/54W
T5 2x28W
900
Front View1174±2
Side View38±1
72±
2
72±2
30
Energy Efficient T5 Regal BattenEnergyefficientindustrialcompactbattensuitablefor28W(T5FTL)singleandtwinlinearfluorescent lamps.
HousingHousing & cover made up of CRCA sheetsteel.Coverisfixedtothehousingby means of 2 nos. bolt with engineering plastic head.
FinishEpoxy powder coated white after phosphochromate treatment.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with high frequency digital ballast (THD<10%) as a standard.
MountingOn ceiling/ wall with screws or suspend by 2 nos. Ø19 mm conduit or chain.
Applications•Schools•Industrialbays•Railwayplatforms•Godowns/garages•Assemblybenches
Product Specifications
31
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFYBYF1PB1W028 1x28W T5 FTL 240 0.140 G 5 >0.98
LHFYBYF2PB1W028* 2x28W T5 FTL 240 0.280 G 5 >0.98
Technical Data
Technical Drawing
All dimensions are in mm
*With program start electronic ballast. Item Code: LHGEBFDHFRA2028.
900
Front View1174±2
Side View38±1
70±
1
T5 1x28W
T5 2x28W
900
Front View1174±2
Side View38±1
72±
2
72±2
32
Regal Batten T5 PCR/ALRGeneral purpose industrial compact batten suitable for 28W (T5 FTL) single and twin linear fluorescent lamps with powder coated or pre-anodised aluminium reflector.
HousingHousing made up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
ReflectorEither powder coated white (PCR) after phosphochromate treatment or high purity pre-anodised aluminium sheet (ALR)fixedtothehousingbymeansof2nos. bolt with engineering plastic head.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with high performance electronic ballast (THD<33%) as a standard.
MountingOn ceiling/ wall with screws at a distance of 900 mm, suspend by 2 nos. Ø19 mm conduit pipe at a distance of 600 mm or with chains at a distance of 700 mm.
Applications•Schools•Industrialbays•Railwayplatforms•Godowns/garages•Assemblybenches
Product Specifications
33
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
With PC Reflector
LHFYBYF1ON1W028*LSSLOW0007
1x28W T5 FTL 240 0.140 G 5 >0.95
LHFYBYF2ON1W028LSSLOW0007
2x28W T5 FTL 240 0.280 G 5 >0.95
With AL Reflector
LHFYBYF1ON1W028*LSSLOX0021
1x28W T5 FTL 240 0.140 G 5 >0.95
LHFYBYF2ON1W028LSSLOX0021
2x28W T5 FTL 240 0.280 G 5 >0.95
Technical Data
Technical Drawing
All dimensions are in mm
*With Olympian Sleek electronic ballast. Item code - LHBT02128032
900
Front View1174±2
Side View38±1
72±
2
112±2
T5 1x28W PCR/ALR T5 2x28W PCR/ALR
900
Front View1174±2
112±2
72±
2
Side View38±1
34
Regal Batten T8 NeoGeneral purpose domestic compact batten suitable for 36W (T8 FTL) single linear fluorescent lamps.
HousingHousing & cover made up of CRCA sheetsteel.Coverisfixedtothehousingby means of 2 nos. bolt with engineering plastic head.
FinishEpoxy powder coated white after phosphochromate treatment.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wiredwith230Vratedhighfrequency HPF electronic ballast as a standard.
Not recommended for industrial 240V application.
MountingOn ceiling/ wall with screws at a distance of 900 mm, suspend by 2 nos. Ø19 mm conduit pipe at a distance of 600 mm or with chains at a distance of 700 mm.
Applications•Lobbies•Schools•Offices•Residences•Conferenceroom
Product Specifications
35
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFYBYG1IN1W036 1x36W T8 FTL 230 0.160 G 13 >0.90
Technical Data
Technical Drawing
All dimensions are in mm
With T8 Neo electronic ballast item code LHGEAFEBHOA1036.
900
Front View1224±2
Side View38±1
68±
1
36
Regal Batten T8 EZGeneral purpose domestic compact batten suitable for 36W (T8 FTL) single and twin linear fluorescent lamps.
HousingHousing & cover made up of CRCA sheetsteel.Coverisfixedtothehousingby means of 2 nos. bolt with engineering plastic head.
FinishEpoxy powder coated white after phosphochromate treatment.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with high frequency electronic ballast as a standard.
MountingOn ceiling/ wall with screws at a distance of 900 mm, suspend by 2 nos. Ø19 mm conduit pipe at a distance of 600 mm or with chains at a distance of 700 mm.
Applications•Lobbies•Schools•Offices•Conferenceroom
Product Specifications
37
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFYBYG1ON1W036 1x36W T8 FTL 240 0.160 G 13 >0.95
LHFYBYG2IN1W036 2x36W T8 FTL 240 0.320 G 13 >0.95
Technical Data
Technical Drawing
All dimensions are in mm
With T8 EZ electronic ballast item code LHGEAFDBHPA1036.
900
Front View1224±2
Side View38±1
63±
2
99±1
T8 2x36W
T8 1x36W
900
Front View1224±2
Side View38±1
68±
1
38
Regal BattenGeneral purpose industrial compact batten suitable for 36W (T8 FTL) single and twin linear fluorescent lamps.
HousingHousing & cover made up of CRCA sheetsteel.Coverisfixedtothehousingby means of 2 nos. bolt with engineering plastic head.
FinishEpoxy powder coated white after phosphochromate treatment.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with high frequency electronic ballast as a standard.Option with high frequency digital ballast (THD<10%) also available.
MountingOn ceiling/ wall with screws at a distance of 900 mm, suspend by 2 nos. Ø19 mm conduit pipe at a distance of 600 mm or with chains at a distance of 700 mm.
Applications•Schools•Lobbies•Industrialbays•Railwayplatforms•Godowns/garages
Product Specifications
39
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFYBYG1OB1W036 1x36W T8 FTL 240 0.160 G 13 >0.95
LHFYBYG2ON1W036 2x36W T8 FTL 240 0.320 G 13 >0.95
LHFYBYG2IB1W036 2x36W T8 FTL 240 0.320 G 13 >0.95
LHFYBYG1PB1W036 1x36W T8 FTL 240 0.160 G 13 >0.98
LHFYBYG2PN1W036 2x36W T8 FTL 240 0.320 G 13 >0.98
Technical Data
Technical Drawing
All dimensions are in mm
EB for LHFYBYG1OB1W036 is Olympian Slim LHBF28904025.EB for LHFYBYG2ON1W036 is Industrial Ballast LHBF07204027.EB for LHFYBYG2IB1W036 is Olympian Slim LHBF28904025 - 2 Nos.EB for LHFYBYG1PB1W036 is Industrial Ballast LHBF08104028.EB for LHFYBYG2PN1W036 is Digital Ballast LHGEBFDHFRA2036.
900
Front View1224±2
Side View38±1
63±
2
99±1
T8 2x36W
T8 1x36W
900
Front View1224±2
Side View38±1
68±
1
40
Regal Batten PCR/ALRGeneral purpose industrial compact batten suitable for 36W (T8 FTL) single and twin linear fluorescent lamps with MS powder coated or pre-anodised aluminium reflector.
HousingHousing made up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
ReflectorEither powder coated white (PCR) after phosphochromate treatment or high purity pre-anodised aluminium sheet (ALR)fixedtothehousingbymeansof2nos. bolt with engineering plastic head.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with high performance electronic ballast (THD<33%) as a standard.
MountingOn ceiling/ wall with screws at a distance of 900 mm, suspend by 2 nos. Ø19 mm conduit pipe at a distance of 600 mm or with chains at a distance of 700 mm.
Applications•Schools•Industrialbays•Railwayplatforms•Godowns/garages•Assemblybenches
Product Specifications
41
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
With PC Reflector
LHFYBYG1OB1W036LSSLOW0008
1x36W T8 FTL 240 0.160 G 5 >0.95
LHFYBYG2IB1W036LSSLOW0009
2x36W T8 FTL 240 0.320 G 5 >0.95
With AL Reflector
LHFYBYG1OB1W036LSSLOX0022
1x36W T8 FTL 240 0.160 G 5 >0.95
LHFYBYG2IB1W036LSSLOX0023
2x36W T8 FTL 240 0.320 G 5 >0.95
Technical Data
Technical Drawing
All dimensions are in mm
T8 1x36W PCR/ALR
70±
2
Side View38±1
72±
2
112±2
900
Front View1224±2
T8 2x36W PCR/ALR
187±2
72±
2Side View
38±1
70±
2
900
Front View1224±2
42
ProdigyEnergysavingreadytouseretrofitT5luminairecompatiblewithexistingopenFTLT12fixturebyremovingstarter.
Benefits• Savesover45%energyascompared to 40W FTL with electromagnetic ballast• Pre-heatstartelectroniccircuit enhances lamp life• Humfree&flickerfreeoperationfrom 125Vto285V• Reducesheatloadonairconditioners• Built-inlampageingprotection• Overvoltageprotectionat295Vand above• EnergyEfficiencyIndex(EEI):A2• Controlledharmonicdistortion (THD<33%)• Highpowerfactor>0.95
Advantage• Actsasaretrofitsolution• Oldindustrialbattenconversioneasy• IdealforconvertingT12/T8/fittingsto T5• Suitableforanypattifitting (remove starter)
Applications•Homes•Schools/libraries•OldGovt.offices•Industrialbattens•Gov.guesthouses•Railwaywaitingrooms
Product Specifications
43
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHIT12114431 1x14W T5 FTL 240 0.070 G 5 >0.95
LHIT13128432 1x28W T5 FTL 240 0.140 G 5 >0.95
Technical Data
Technical Drawing
All dimensions are in mm
Ensure removal of starter from old T12/ T8 fitting before fixing “Prodigy“ in and switching on.
665±2
Side View
42±
1
Front View27±1
Prodigy 14W T5
Front View27±1
Side View
1213±2
42±
1
Prodigy 28W T5
44
Prodigy UltraGeneralpurposeindustrialcompact&decorativePVCbattenwithintegralwingshapedmetallizedfilmreflectorsuitablefor28W(T5FTL)singlelinearfluorescentlamps.
HousingHousingmadeupofPVCinwhitefinishwith decorative metallic grey coloured end caps.
ReflectorIntegral wing shaped metallized aluminiumfilmreflectorforhighlightoutput.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with integral high frequency digital ballast (THD<10%) as per IS:13021Part1&2.
MountingFixed on ceiling/ wall with the help of snap-oninstallerprovidedwithfixture.
Applications•Schools•Industrialbays•Railwayplatforms•Godowns/garages•Assemblybenches
Product Specifications
45
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFYBXF1PN1W028 1x28W T5 FTL 240 0.140 G 5 >0.98
LHEYBXFGON1W028* 1x28W T5 FTL 240 0.140 G 5 >0.98
Technical Data
Technical Drawing
All dimensions are in mm
Front View1183±2
Side View28±1
40±1
45±
1
*With Lamp.
46
Batten Super T5Decorativeultraslimfixturewithextrudedaluminiumbody,prismaticdiffuser, snaponinstallers & HF electronic ballast suitable for T5 FTL.
HousingMade up of ultra slim extruded aluminium channel with rib for extra strength, powdercoatedwithwhitefinish.
End capsBlue colour clip-on end caps provided for better aesthetic appearance.
DiffuserHigh quality polycarbonate prismatic diffuser for glare free light.
Lamp holdersPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wiredwith240Vratedhighfrequency electronic ballast, upto terminalblock,pre-fittedwithlamp.
MountingFixed on wall/ ceiling with the help of snap-on installers provided.
Applications•Residences•Cleanrooms•Covelighting•Hospitalpremises•Educationalinstitutions•Corridors
Product Specifications
47
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFYBYF1INNW028 1x28W T5 FTL 240 0.140 G 5 >0.95
LHFYBYF1IN1W054 1x54W T5 FTL 240 0.350 G 5 >0.55
Technical Data
Technical Drawing
All dimensions are in mm
1202±2
23±
1
45±
2
Top View
Front View
Side View
48
Magnum 1Corrosion resistant, impact proof, surface mounting luminaire of polycarbonate housing with transparent & reeded polycarbonate cover suitable for wet location.
Product Specifications
HousingMade up of corrosion resistant unbreakable polycarbonate body.
CoverClear polycarbonate reeded cover with better light dispersive internal reeds.
OpticsReflector made from powder coated white MS sheet.
Lamp holderPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with high frequency electonic ballast (THD<33%) upto terminal block as standard.Option for digital ballast (THD<10%) available on request.
MountingOn ceiling/ wall through 2 nos. slots using screws from the top of the luminaire.
Applications•Batteryrooms•Railwaystations•Undergroundparkings•Thermalpowerstations
49
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHIF55218058 2x18W FTL HF 240 0.160 G 13 >0.95
LHIF54218058* 2x18W FTL HF 240 # G 13 >0.95
Technical Data
Technical Drawing
All dimensions are in mm
*Emergency power pack with Ni-cd Battery. (EM-33B Basic).Charging period 8 hours. Discharging period 120 minutes @ 20% lumen output.Battery life-700 times charging at rated conditions.#Depends upon charging and mains running current.
670+2Front View
475
Side View
110+
2
160+2
50
Magnum 2Corrosion resistant, impact proof, surface mounting luminaire with polycarbonate housing with transparent & reeded polycarbonate cover suitable for wet location.
Product Specifications
HousingMade up of corrosion resistant unbreakable polycarbonate body.
CoverClear polycarbonate reeded cover with better light dispersive internal reeds.
OpticsReflector made from powder coated white MS sheet.
Lamp holderPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with high frequency electonic ballast (THD<33%) upto terminal block as standard.Option for digital ballast (THD<10%) available on request.
MountingOn ceiling/ wall through 2 nos. slots using screws from the top of the luminaire.
Applications•Batteryrooms•Chillingplants•Chemicalfactories•Undergroundparkings•Thermalpowerstations
51
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHIT55128032 1x28W FTL T5 240 0.140 G 13 >0.95
LHIT56228033 2x28W FTL T5 240 0.280 G 13 >0.95
LHIT55154060 1x54W FTL T5 240 0.230 G 13 >0.98
LHIT56254071 2x54W FTL T5 240 0.460 G 13 >0.95
LHIF55136026 1x36W FTL HF 240 0.230 G 13 >0.85
LHIF56236027 2x36W FTL HF 240 0.460 G 13 >0.85
LHFKAWG1EN6J036* 1x36W FTL 240 # G 13 >0.95
LHIF56236025* 2x36W FTL 240 # G 13 >0.95
Technical Data
Technical Drawing
*Emergency power pack with Ni-cd Battery. (EM-33B Basic). #Depends upon charging and mains running current.Charging period 8 hours. Discharging period 120 minutes @ 20% lumen output. Battery life-700 times charging at rated conditions.
Lamp Type Length (L) Width (W) Height (H) D
1x28W 1215±2 104±2 92±2 840±1
2x28W 1215±2 104±2 92±2 840±1
1x36W 1270±2 80±2 100±2 852±1
2x36W 1270±2 122±2 100±2 852±1
1x54W 1215±2 104±2 92±2 840±1
2x54W 1215±2 104±2 92±2 840±1
All dimensions are in mm
MountingHolesDistance:D
LFront View
D
Side View
H
W
52
VPF 1 NINon-integral well glass luminaire, suitable for incandescent/ High Pressure Mercury Vapour/SodiumVapour/MetalHalidelampforvapourladdenareas.
Product Specifications
HousingSingle piece die-cast aluminium alloy LM-6.
CoverHeat resistant glass bowl with zinc plated/ galvanized MS wire guard.
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsWhite painted housing from inside acts as refl ector.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gearUse appropriate CG box as per selected HID lamp source and wattages except for incandescent (GLS) lamp.
MountingSuspend with 20 mm diameter threaded GI pipe.
Applications•Steelplants•Industrialbays•Thermalplants•Cementfactories•Mediumindustrialunits
53
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHVM16115099 1x200W GLS 240 0.830 E 27 1.00 -
LHVM16115099* 1x125WHPMV 240 0.690 E 27 >0.85 10 mfd
LHVM16115099* 1x70WSV/MH-E 240 0.400 E 27 >0.85 10 mfd
LHVM16115099* 1x150W MH-E 240 0.820 E 27 >0.85 20 mfd
LHVS36115099* 1x150WSV-E 240 0.820 E 40 >0.85 20 mfd
Technical Data
Technical Drawing
*When used with appropriate rating CG box (except 200W GLS lamp).
All dimensions are in mm
213±2
Front View
285±
2
54
VPF 1 NewIntegralwellglassluminairesuitablefor70WHighPressureSodiumVapour/MetalHalide/125WMercuryVapour/150WSodiumVapourlampforvapourladdenareas.
Product Specifications
HousingSingle piece die-cast aluminium alloy LM-6.
CoverHeat resistant glass bowl with zinc plated/galvanized MS wire guard.
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsWhite painted housing from inside acts as reflector.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means “U” brackets at a CD of 105 mm.
Applications•Steelplants•Industrialbays•Thermalplants•Cementfactories•Mediumindustrialunits
55
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHVW16170D99*LHBW20170036
1x70WSV/MH-E 240 0.400 E 27 >0.85 10 mfd
LHVG16112099*LHBG08112036
1x125WMV 240 0.690 E 27 >0.85 10 mfd
LHVS26115A99*LHBW20115036
1x150W SON-E 240 0.820 E 40 >0.85 20 mfd
Technical Data
Technical Drawing
*Housing consists of lamp compartment & gear box, packed separately.
F
B
E
A
2 Open Elliptical Slot Ø7x18
C
G
D
Lamp Type A B C D E F G
70/125W 295±2 340±2 240±2 115±2 254±2 190±2 105±2
150W 350±2 422±2 274±2 134±2 316±2 220±2 105±2
All dimensions are in mm
56
VPF 2 PremiumVerticalmounting integralwellglass luminaire,suitable for70WHighPressureSodiumVapour/MetalHalideor125WMercuryVapourlamp.
Product Specifications
HousingSingle piece pressure die-cast aluminium alloy LM-6.
CoverHeat resistant glass bowl with zinc plated/galvanized MS wire guard.
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsWhite painted circular disc acts as reflector.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means of provided heavy duty suspension hook.
Applications•Steelplants•Industrialbays•Thermalplants•Cementfactories•Mediumindustrialunits
57
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHVW27170D99*LHBW07170036
1x70WSV/MH-E 240 0.400 E 27 >0.85 10 mfd
LHVG27112099*LHBG08112036
1x125WMV 240 0.690 E 27 >0.85 10 mfd
Technical Data
Technical Drawing
*Housing consists of lamp compartment & gear box, packed separately.
All dimensions are in mm
Ø173.6
Top View
Side View
192±2
371±
2
141.5±2
Front View
58
HB/MB NI with Al. Reflector (Open)Open type vertical highbay/ mediumbay luminaire suitable for 85W retro CFL and 150W/250W/400WHighPressureSodiumVapourellipticalcoatedlamp.
Product Specifications
HousingHousing & cover deep drawn from EDD grade steel sheet.
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsSpun aluminium reflector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp holderIn ceramics with electrical grade brass contacts.
*Electric gearSelect appropriate control gear as per selected HID Lamp source & wattage.
*Not applicable for 85W Retrofit CFL.
MountingSuspend by means of provided heavy duty suspension hook.
Applications•Steelplants•Warehouses•Thermalplants•Heavyengg.industries
59
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHYW12185099LHYW04125099**
1x85W Retro CFL 240 0.650 E 27 >0.55 -
LHYW12140099LHYW04125099**
1x150WSV-E 240 0.820 E 40 >0.85 20 mfd
LHYW12140099LHYW04125099**
1x250WSV-E 240 1.320 E 40 >0.85 33 mfd
LHYW12140099LHYW02140099**
1x400WSV-E 240 2.200 E 40 >0.85 42 mfd
Technical Data
Technical Drawing
Electrical data shown here is symbolic for actual data refer to control gear used.**Reflectors supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Ø80±1
Top ViewFront View
L
H
Ord. Code Length (L) Height (H)
LHYW04125099 403±2 460±2
LHYW02140099 523±2 500±2
All dimensions are in mm
60
HB/MB NI with Al. Reflector (Closed)Enclosed type vertical highbay/ mediumbay luminaire (with glass) suitable for 150W/ 250W/400WHighPressureSodiumVapour/MetalHalideellipticalcoatedlamp.
Product Specifications
HousingHousing & cover deep drawn from EDD grade steel sheet.
CoverThermal shock proof, impact resistant, tempered and toughened protective 5mmthickglassfixedtothereflectorby3 nos. toggles.
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsSpun aluminium reflector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gearSelect appropriate control gear as per selected HID Lamp source & wattage.
MountingSuspend by means of provided heavy duty suspension hook.
Applications•Steelplants•Warehouses•Thermalplants•Heavyengg.industries
61
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHYW12185099LHYW04125099*LHYW23125099**
1x150W MH-E 240 0.820 E 27 >0.55 20 mfd
LHYW12140099LHYW04125099*LHYW23125099**
1x150WSV-E/ 150W CMI-TT Plus
240 0.820 E 40 >0.85 20 mfd
LHYW12140099LHYW04125099*LHYW23125099**
1x250WSV/MH-E 240 1.320 E 40 >0.85 33 mfd
LHYW12140099LHYW02140099*LHYW21140099**
1x400WSV/MH-E 240 2.200 E 40 >0.85 42 mfd
Technical Data
Electrical data shown here is symbolic for actual data refer to control gear used.*Reflectors/ **Glass supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Technical Drawing
All dimensions are in mm
Top View
H
Front ViewLOrd. Code Length (L) Height (H)
LHYW04125099 406±2 463±2
LHYW02140099 526±2 503±2
62
Chandelier Seal Beam IDecorative, contrast reducing translucent polycarbonate highbay suitable for 70W/150W ellipticalcoatedHighPressureSodiumVapour/MetalHalide/CMI-TTPluslamp.
Product Specifications
HousingPressure die-cast aluminium LM24.
CoverConicalfoodgrade&UVstabilisedpolycarbonate sagged lens.
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsInjection moulded food grade & UVstabilisedpolycarbonatewithprecisely contoured prismatic internal facets ensures uniform & better light distribution.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means of 12mm diameter threaded G.I. pipe.
Applications•Arrivalhalls•Shoppingmalls•Airportwaitinglounges•Publiccirculatingareas
63
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHYW05170C99LHBW07170036LHYW05115099*
1x70WSV/MH-E/ 70W CMI-TT Plus
240 0.400 E 27 >0.85 10 mfd
LHYW05115C99LHBW20115036LHYW05115099*
1x150W MH-E/ 150W CMI-TT Plus
240 0.820 E 27 >0.85 20 mfd
Technical Data
*Refractor and cover supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Technical Drawing
All dimensions are in mm
Ø330
Ø4.5 3 Holes for
PCD Ø125.8Top View
Ø141
Front ViewØ330
426±
3
64
Highbay Neo with Neck ReflectorVerticalopentypehighbaylumianiresuitableforellipticalcoatedHighPressureSodiumVapour/MercuryVapourlampupto250W.
Product Specifications
HousingPressure die-cast Al. housing with loop in - loop out facility (optional).
FinishEpoxy powder coated grey after phosphochromate treatment.
OpticsSpun aluminium reflector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gearPre-wired with power factor improvement capacitor and impulse ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately be wired as per instruction.
MountingSuspend by means of provided heavy duty suspension hook.
Applications•Steelplants•Warehouses•Thermalplants•Heavyengg.industries
65
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHFLAQV1AA6H150LHBW20115036LSSLOS0002*LSSLOX0028**
1x150WSV/MH-E/ 1x150 CMI-TT Plus
240 0.820 E 40 >0.85 20 mfd
LHFLAQV1AA6H250LHBW00125036LSSLOS0002*
1x250WSV-E 240 1.320 E 40 >0.85 33 mfd
Technical Data
*Reflectors/**Glass supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Technical Drawing
All dimensions are in mm
316
308±
2
620±
3
Ø 385
Ø11
66
Uro Bay (Open)Verticalhighbay/mediumbayluminairesuitableforHighPressureellipticalcoatedSodiumVapourlampupto400W.
Product Specifications
HousingPressure die-cast aluminium alloy LM6.
FinishEpoxy powder coated grey color after phosphochromate treatment.
OpticsSpun aluminium reflector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.
MountingMounting by means of hook provided on top housing.
Applications•Steelplants•Warehouses•Thermalplants•Heavyengg.industries
67
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHYW10115D99LHBW20115036LHYW10140099*
1x150WSV-E 240 0.820 E 40 >0.85 20 mfd
LHYW10125D99LHBW00125036LHYW10140099*
1x250WSV-E 240 1.320 E 40 >0.85 33 mfd
LHYW10140D99LHGMCKENEBE1400LHYW10140099*
1x400WSV-E 240 2.200 E 40 >0.85 42 mfd
Technical Data
*Reflectors supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Technical Drawing
All dimensions are in mm
633±
3
430±1Front View
Top View
68
Uro Bay (Enclosed)Vertical highbay/ mediumbay luminaire (with glass) suitable for High Pressure ellipticalcoatedSodiumVapour/MetalHalidelampupto400W.
Product Specifications
HousingPressure die-cast aluminium housing with cooling serrations on side.
FinishEpoxy powder coated grey color after phosphochromate treatment.
OpticsSpun aluminium reflector electrochemically brightened, anodised outside and sand blasted from inside.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gearPre-wired with power factor improvement capacitor and SI ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately, to be wired as per instruction.
MountingMounting by means of hook provided on top housing.
Applications•Steelplants•Warehouses•Thermalplants•Heavyengg.industries
69
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHYW10115D99LHBW20115036LHYW10140099*LHYW35140199**
1x150WSV/MH-E/ CMI-TT Plus
240 0.820 E 40 >0.85 20 mfd
LHYW10125D99LHBW00125036LHYW10140099*LHYW35140199**
1x250WSV/MH-E 240 1.320 E 40 >0.85 33 mfd
LHYW10140D99LHGMCKENEBE1400LHYW10140099*LHYW35140199**
1x400WSV/MH-E 240 2.200 E 40 >0.85 42 mfd
Technical Data
*Reflectors/ **Glass supplied in separate bulk packing for transportation purpose, for installation refer to provided instructions.
Technical Drawing
All dimensions are in mm
Top View
637±
3
434±1Front View
70
T5 Highbay (Enclosed)Highbay range of luminaires with specially designed reflectors and suitable for 4x14W, 4x24W, 4x28W, 4x54W & 6x54W T5 FTL Lamps.
Product Specifications
HousingMade up of CRCA sheet steel.
FinishEpoxy powder coated white after phosphochromate treatment.
OpticsReflector made up of high purity pre-anodised aluminium sheet. Designed for symmetric light distribution for high vertical illuminance covered with UVstabilisedmethacrylatecoverasstandard.*Option for polycarbonate cover available on request.
Lamp holderPushfitrotarytypewhitepolycarbonate/PBT with electrical grade brass contacts.
Electric gearPre-wired with HF high performance electronic ballast (THD<33%) as a standard.Option of high frequency digital ballast (THD<10%) available on request.
MountingProvision for suspension through Ø19 mm conduit or on ceiling with 4 nos. holes of Ø5 mm.
Applications•Warehouses•Industrialsheds•Railwaystations•Doubleheightlobbies
71
Technical Data
Technical Drawing
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHIT01414040 4x14W T5 FTL 240 0.280 G 5 >0.95
LHIT01424034 4x24W T5 FTL 240 0.440 G 5 >0.95
LHIT01428033 4x28W T5 FTL 240 0.560 G 5 >0.95
LHIT01454071 4x54W T5 FTL 240 0.920 G 5 >0.95
LHFLAQL7IA5W054 6x54W T5 FTL 240 1.440 G 5 >0.95
LHIT02428051* 4x28W T5 FTL 240 0.560 G 5 >0.98
Top View
Side View
W
H
LFront View
All dimensions are in mm
Lamp Type Length (L) Width (W) Height (H)
4x14/ 4x24W T5 FTL 595±2 400±2 50±1
4x28/ 4x54W T5 FTL 1196±2 400±2 50±1
6x54W T5 FTL 1218±2 555±2 50±1
*With polycarbonate cover.
72
73
Professional Area Lighting
74
Jeta Neo 30 & 50Environmental friendly, energy saving, long life, exclusive innovative pressure die-cast aluminium flood light with high power COB LED as light source, suitable for highlightingarchitectural features or retail spaces.
Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hrs.) & long lasting LED driver (upto 35,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury • OperatingTemp.range: -20°C to +45°C• Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional tunnel lighting systems
Housing & FinishEpoxy powder coated pressure die-cast aluminium housing (ADC12/LM24) in whitefinishwithelegantlydesignedheatsinkforefficientthermalmanagement,sturdiness & excellent corrosion resistant. Cable gland PG9 is provided at cable entry for maintaining ingress protection.
CoverHighqualitytoughenedglassfixedtohousing with 4 nos. screws.
LampHighefficiencylonglifeCOBLEDwithRa>70&lumenefficacyof110lm/Wwith beam angle 120º to ensure better uniformity of light distribution.
OpticsReflector made up of high purity matt finishanodizedaluminiumsheet.
Electronic driverIn-built, replaceable electronic driver with APFC, THD<33%.
MountingWall or surface mounting using adjustable MS bracket of thickness 2.5mmprovidedwiththefixtureby2elliptical slots of Ø 10mm at a distance of 90mm for 30W and at a distance of 137mm for 50W.
Applications•Signboards•Building&monuments•Billboard•Shopboard
Product Specifications
75
System Power Length (L) Width (W) Height (H) Mounting Hole Distance (D)
30W LED 225±2 186±2 151±2 90±1
50W LED 287±2 237±2 170±2 137±1
All dimensions are in mm
Technical Drawing
Technical Data
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHEPBFUEIN6W030 30W 240 0.140 >0.95 5000K >80
LHEPBFUEIN6W050 50W 240 0.230 >0.95 5000K >80
Driver code: LHGDRDCBHOA1030 for 30W, LHGDVDDBHQB1050 for 50W.
Front View
DTop View
L
W 25.2
Side ViewH
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
76
Jeta LinearEnergy saving, environmental friendly, long life, exclusive innovative extruded aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features, retail spaces or border areas.
Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hrs.) & long lasting LED driver (upto 35,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain mercury• OperatingTemp.range: –20°C to +45°C • Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional tunnel lighting systems
Housing & FinishAnodised black extruded aluminium housing with elegantly designed heat sinkforefficientthermalmanagement,sturdiness & excellent corrosion resistant. Cable gland PG7 is provided at cable entry for maintaining ingress protection.
CoverHighqualitytoughenedglassfixedtohousing with silicon glue.
LampHighefficiencylonglifeLEDchipsinmodule with Ra>70&lumenefficacyof 120 lm/W with PMMA modular lens plate of beam angle 45º to ensure better uniformity of light distribution.
Electronic driverIn-built electronic driver with 2 output channel each with APFC, THD<15%, Output Short Circuit Protection, Over VoltageProtection,SurgeVoltageProtection & other reliability tests as per IS:15885Part2/Sec13.
MountingWall or surface mounting using adjustableV-shapedAluminiumbracketof thickness 3.5 mm provided with the fixtureby2ellipticalslotsofØ7.5mm.
Applications•Signboards•Building&monuments•Billboard•Shopboard
Product Specifications
77
Technical Data
Technical Drawing
All dimensions are in mm
System Power
Length (A)
Width (B)
Height (C)
Mounting CD(D)
No. of LED
80W 422±2 230±2 177±2 2 Elliptical Hole Ø 13x50 at CD 199 32
100W 516±2 230±2 177±2 2 Elliptical Hole Ø 13x50 at CD 245 40
150W 630±2 230±2 177±2 2 Elliptical Hole Ø 13x75 at CD 310 64
Driver code: LHGDDDBHGRBL080 for 80W, LHGDIDCHERBL100 for 100W, LHGDDDEHERBL150 for 150W.
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHEUACN7PN6K080 80W 240 0.340 >0.98 6000K >90
LHEUACN7PN6K100 100W 240 0.450 >0.95 6000K >90
LHEUACN7PN6K150 150W 240 0.640 >0.95 6000K >90
Side ViewCable Gland PG7
CTop View
Bottom View
A
Ø13
B
D 17
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
78
Jeta Neo 120/150Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces.
Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hrs.) & long lasting LED driver (upto 35,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• OperatingTemp.range: -20°C to +45°C• Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional tunnel lighting systems
Housing & FinishEpoxy powder coated die-cast aluminiumhousing(LM24)ingreyfinishwith elegantly designed heat sink for efficientthermalmanagement,sturdiness& excellent corrosion resistant. Cable gland PG9 is provided at cable entry for maintaining ingress protection.
CoverHighqualitytoughenedglassfixedtohousing with 8 nos. screws.
LampHighefficiencylonglifeLEDchipsinmodule with Ra>70&lumenefficacyof 135 lm/W with PMMA modular lens plate of beam angle 45º to ensure better uniformity of light distribution.
Electronic driverIn-built electronic driver (with 2 output channel each) with APFC, THD<10%.
MountingWall or surface mounting using adjustable MS bracket of thickness 2.5mmprovidedwiththefixtureby2elliptical slots of Ø 9.0mm at a distance of 146mm for 120W, Ø 12.5mm at a distance of 178mm for 150W.
Applications•Signboards•Building&monuments•Billboard•Shopboard
Product Specifications
79
Technical Data
Technical Drawing
Driver code: LHGDDDCHERBL120 for 120W, LHGDDDEHERBL150 for 150W.
Top ViewD
Front ViewL
Side ViewW
H
68
LockingBolt
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHEPCZU7P46J120 120W 240 0.640 >0.98 6000K >80
LHEPCZU7P46J150 150W 240 0.640 >0.98 6000K >80
All dimensions are in mm
System Power
Length (L)
Width (W)
Height (H)
No. ofLED
Mounting HoleDistance (D)
120W 427±2 325±2 200±2 48 146±1
150W 427±2 325±2 236±2 64 178±1
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
80
Jeta Pro 200/240/300Energy saving, environmental friendly, long life, exclusive innovative pressure die-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces.
Benefits• Betterlumens&longerlamplife• Highefficacy&lowerpower consumption• ExtraordinarylonglifeofLED’s(upto 50,000 burning hrs.) & long lasting LED driver (upto 35,000 burning hrs.) ensures zero maintenance• NoUV&IRradiations• Environmentfriendlyasitdoesnot contain Mercury• OperatingTemp.range: -10°C to +45°C• Instantlightwithlowrunning temperatures• Significantlylowerrunningcostas compared to conventional tunnel lighting systems
Housing & FinishEpoxy powder coated pressure die-cast aluminiumhousing(LM24)ingreyfinishwith elegantly designed heat sink for efficientthermalmanagement,sturdiness& excellent corrosion resistant. Cable gland is provided at cable entry for maintaining ingress protection.
CoverHighqualitytoughenedglassfixedtohousing with SS screws.
LampHighefficiencylonglifeLEDchipsinmodule with Ra>70&lumenefficacyof 130 lm/W with PMMA modular lens plate of beam angle 45º to ensure better uniformity of light distribution.
Electronic driverIn-built (2 nos.) electronic driver (with 2 output channel each) with APFC, THD<10%.
MountingWall or surface mounting using adjustable MS bracket of thickness 2.5mmprovidedwiththefixtureby2elliptical slots.
Applications•Signboards•Building&monuments•Billboard•Shopboard
Product Specifications
81
Technical Data
Technical Drawing
Ordering Code
System Power
Nominal Voltage (V)
Mains Current (A)
Power Factor
Colour Temp. (CCT)
System Luminous Efficacy Lm/ W
LHEPDFU7P47J200 200W 240 0.920 >0.90 6000K >80
LHEPDFU7P46J240 240W 240 1.100 >0.90 6000K >80
LHEPDFU7P46J300 300W 240 1.390 >0.90 6000K >85
All dimensions are in mm
System Power
Length (L)
Width (W)
Height (H)
Mounting CD (D)
No. of LED
200W 526±2 325±2 252±2 178 96
240W 526±2 325±2 252±2 178 96
300W 665±2 330±2 257±2 178 128
52.5
39.5
Top ViewD
Front ViewL
Side ViewW
H
Note: WarrantyvoidforLEDfixturesincludingDrivers,ifindividualpointsofinstallations are not provided with proper Earthing.
82
Jeta MiniMini flood light luminaire suitable for 150W Linear Tungsten Halogen double ended lamp.
Product Specifications
HousingPressure die-cast aluminium alloy LM24 in IP55 protection.
CoverTempered protective toughened glass, 5mm thick, thermal shock and impact resistant.
FinishEpoxy black powder coated after phosphochromate treatment.
OpticsSymmetrical reflector is made of high purity pre-anodised dimpled aluminium sheet.
Lamp holderIn ceramics with silver plated contacts.
MountingSurface mounting using built in MS powder coated bracket.
Applications•Billboards•Shopboards•Housefunctions•Garden&parks
83
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFH05115099 150W Halogen 240 0.625 Rx7s 1.00
Technical Data
Technical Drawing
All dimensions are in mm
141±190±1
52±1Front View
Side View
185±
2
84
Jeta 1Flood light luminaire suitable for 500W Linear Tungsten Halogen/70W Metal Halide double ended lamp.
Product Specifications
HousingPressure die-cast aluminium alloy LM24 in IP55 protection.
CoverTempered protective toughened glass, 5mm thick, thermal shock & impact resistant.
FinishEpoxy powder coated black after phosphochromate treatment.
OpticsReflectors made of high purity pre anodised dimpled aluminium sheet.
Lamp holderIn ceramics & silver plated contacts.
Electric gearUse appropriate control gear, when luminaire used with 70W High Pressure Metal Halide double ended lamp.
MountingWall/ surface mounting using bracket.
Applications•Signboards•Emergencyareas•Constructionsites•Pedestriancrossings
85
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFH05150099 500W Halogen 240 2.080 Rx7s 1.00
Technical Data
Technical Drawing
All dimensions are in mm
185±2
263±
2
68±1Front View
128±2
Side View
86
Jeta 2Flood light luminaire suitable for 1000W Linear Tungsten Halogen lamp.
Product Specifications
HousingPressure die-cast aluminium alloy LM24 in IP55 protection.
CoverTempered protective toughened glass, 5mm thick, thermal shock & impact resistant.
FinishEpoxy powder coated black after phosphochromate treatment.
OpticsReflectors made of high purity pre anodised dimpled aluminium sheet.
Lamp holderIn ceramics & silver plated contacts.
MountingWall/ surface mounting using bracket.
Applications•Signboards•Emergencyareas•Constructionsites•Pedestriancrossings•Sportsarena
87
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket Power Factor
LHFH05110099 1000W Halogen 240 4.160 Rx7s 1.00
Technical Data
Technical Drawing
All dimensions are in mm
276±2
100±2
300±
2
Front View
140±1
Side View
88
Jeta 3 NewIntegral wide beam flood light luminaire suitable for 70/150W High Pressure Metal Halide double ended lamp.
Product Specifications
HousingPressure die-cast aluminium alloy LM24 forefficientthermalmanagement,sturdiness & excellent corrosion resistant. PG 11 cable gland is provided at cable entry for maintaining ingress protection.
CoverTempered protective toughened front glass, 5mm thick, thermal shock and impactresistant,fixedwithquickrelease hinge-clips for in-position lamp replacement.
FinishEpoxy white powder coated after phosphochromate treatment.
OpticsReflectors made of high purity dimpled pre-anodised aluminium sheet for wide beam. Available in Assymmetric version.
Lamp holderIn ceramics with silver plated contacts.
Electric gearPre-wired with power factor improvement capacitor and super imposed ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately to be wired as per instruction.
MountingSurface mounting using built in heavy duty bracket.
Applications•Signboards•Industrialareas•Constructionsites•Monuments&facadelighting•Sportscomplex
89
Technical Data
Technical Drawing
All dimensions are in mm
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHFM04170D99LHBW07170036
1x70W MH DE 240 0.400 Rx7s >0.85 10 mfd
LHFM04115D99LHBW20115036
1x150W MH DE 240 0.820 Rx7s >0.85 20 mfd
Also suitable for 70/150W HPSV double ended lamps.
432±
2
275±2
JETA 3IP65
365±
2
Top View99
Front View
3 Holes Ø11mm
Side View
81±2
90
Jeta 6 RO IP66Integral wide beam long throw flood light luminaire suitable for single tubular 250W/ 400W HighPressureSodiumVapour/MetalHalidelamp.
Product Specifications
HousingPressure die-cast aluminium alloy LM24 with dual compartment for better heat desipation.
CoverTempered protective toughened front glass with thermal shock resistance and impactresistance,fixedwith2nos.SSscrews for in-position lamp replacement.
FinishEpoxy grey powder coated after phosphochromate treatment.
OpticsReflectors made of high purity pre-anodised dimpled aluminium sheet for wide beam.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gearPre-wired with power factor improvement capacitor and super imposed ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately to be wired as per instruction.
MountingSurface mounting using built in heavy duty bracket.
Applications•Signboards•Securityareas•Airportapprons•Highmasttowers•Constructionsites•Sportscomplex
91
Technical Data
Technical Drawing
All dimensions are in mm
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHFY37125C99LHGMCJENEAC1250
1x250W SON/MH SET
240 1.320 E 40 >0.85 33 mfd
LHFY37140C99LHGMCKENEAE1400
1x400W SON/MH SET
240 2.200 E 40 >0.85 42 mfd
414±2
512±
3
Top View
302.
5±2
141±2
Front View
• 250W SV/MH• 400W SV/MH
IP-66
92
Jeta 6 NewIntegral wide beam long throw flood light luminaire suitable for single tubular 250W/ 400W HighPressureSodiumVapour/MetalHalidelamp.
Product Specifications
HousingPressure die-cast aluminium alloy LM24 with IP65 protection.
CoverTempered protective toughened black colour front glass, 5mm thick, thermal shockandimpactresistant,fixedwithquick release hinge-clips for in-position lamp replacement.
FinishEpoxy white powder coated after phosphochromate treatment.
OpticsReflectors made of high purity pre-anodised dimpled aluminium sheet for wide beam. Available in Assymmetric version.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gearPre-wired with power factor improvement capacitor and super imposed ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separately to be wired as per instruction.
MountingSurface mounting using built in heavy duty bracket.
Applications•Signboards•Securityareas•Airportapprons•Highmasttowers•Constructionsites•Sportscomplex
93
Technical Data
Technical Drawing
All dimensions are in mm
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHFY39140C99LHGMCKENEAE1400
1x400W SON/MH SET
240 2.200 E 40 >0.85 42 mfd
402±2
Front View
149±2
423±
2
486±
2
100Top View
94
Ranger 1 New NINon Integral wide beam long throw flood light luminaire suitable for single tubular High PressureSV/MHlampupto400W.
Product Specifications
HousingPressure die-cast aluminium alloy LM24 with IP65 protection.
CoverTempered protective toughened front glass, 5mm thick, thermal shock and impact resistant. Fixed to the frame by silicon sealant & to the housing by 2 nos. SS toggles.
FinishEpoxy grey powder coated after phosphochromate treatment.
OpticsReflectors made of high purity dimpled/peened pre-anodised specular aluminium sheet.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gear*Select appropriate control gear as per selected lamp source & wattage.
MountingSurface mounting using provided bracket with locking holes.5mm with holes of Ø 13mm at PCD of 49mm.
Applications•Arealighting•Highmasttowers•Marshellingyards•Switchyardstations•Monuments&facadelighting•Sportscomplex
95
Technical Data
Technical Drawing
All dimensions are in mm
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket
LHFY46140099 1x400W SON/ MH SET 240 2.200 E 40
*To be used with appropriate rating CG box.
395±2
225±
2
152Top View
152±2
258±
2
Side View
370±
2
96
Jeta AxialSymmetric Non-integral flood light luminaire suitable upto1x400W tubular High Pressure SodiumVapourorMetalHalidelamp.
Product Specifications
HousingDie-cast aluminium alloy LM6 provided with handle for ease of handling. Flynut arrangement is provided in housing for lamp replacement.
CoverTempered and toughened protective front glass, 5mm thick, thermal shock & impact resistant (IK08). Fixed to the housing with silicon glue & 4 nos. SS toggles.
FinishEpoxy grey powder coated after phosphochromate treatment.
OpticsReflector made up of spun aluminium, electrochemically brightened & anodised.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gear*Select appropriate control gear as per selected lamp source & wattage.
MountingWall/surface mounting using the adjustable mounting bracket of thickness 5mm with holes of Ø 13mm at PCD of 49mm.
Applications•Stadiums•Storageyards•Securityareas•Highmasttowers•Monuments&facadelighting•Nevypier/Jetty/Airportaprons
97
Technical Data
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket
LHFY04240099 upto 400W SON/ MH SET 240 2.200 E 40
*To be used with appropriate rating CG box.
Technical Drawing
All dimensions are in mmTolerance ± 2mm
98Back View
1/4”x52mm Fly Nut
446
433
256 177
715
372
Side View
Ø53
7
98
Ranger 2 NINon Integral wide beam long throw flood light luminaire suitable for twin tubular High PressureSV/MHlampsupto400W.
Product Specifications
HousingDie-cast aluminium alloy LM6 with IP65 protection.
CoverTempered protective toughened front glass, 5mm thick, thermal shock and impact resistant. Sealed from front side with silicon sealant & held to the housing by 4 nos. SS toggles.
FinishEpoxy grey powder coated after phosphochromate treatment.
OpticsReflectors made of high purity dimpled/ peened center reflector & pre-anodised specular side reflectors.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gear*Select appropriate control gear as per selected lamp source & wattage.
MountingSurface mounting using built in heavy duty bracket with locking holes.
Applications•Arealighting•Highmasttowers•Marshellingyards•Switchyardstations•Monuments&facadelighting•Sportscomplex
99
Technical Data
Technical Drawing
All dimensions are in mm
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket
LHFY05240099 2x400W SON/ MH SET 240 4.400 E 40
*To be used with appropriate rating CG box.
730±2
102Top View
200±2
345±
2
Front View
155±2
100
Ranger 2 Oval NINon Integral wide beam long throw flood light luminaire suitable for twin tubular High PressureSV/MHlampupto400W.
Product Specifications
HousingPressure die-cast aluminium housing (LM24)forefficientthermalmanagement,sturdiness & excellent corrosion resistant. PG11 cable gland provided for maintaing ingress protection.
CoverTempered protective toughened front glass, 5mm thick, thermal shock and impact resistant. Fixed to the frame by silicon gasket & to the housing by 6 nos. SS toggles.
FinishEpoxy grey powder coated after phosphochromate treatment.
OpticsReflectors made of high purity pre-anodised specular aluminium sheet.
Lamp holderIn ceramics with electrical grade brass contacts.
Electric gear*Select appropriate control gear as per selected lamp source & wattage.
MountingSurface mounting using adjustable bracket with locking holes.
Applications•Arealighting•Highmasttowers•Marshellingyards•Switchyardstations•Monuments&facadelighting•Sportscomplex
101
Technical Data
Technical Drawing
All dimensions are in mm
Ordering Code Lamp Type Nominal Voltage (V) Mains Current (A) Lamp Socket
LHFY06240099 2x400W SON/ MH SET 240 4.400 E 40
* To be used with appropriate rating CG box.
727±2Top View
164±2Front View
3 Holes Ø12.5 mm
358±
231
4±2
19
102
BeamExclusively designed narrow beam ultra compact integral flood light suitable for single MH SEQ/CMI-T lamp upto 150W.
Product Specifications
HousingPressure Die-cast aluminium alloy LM24 in IP65 protection.
CoverTempered protective toughened front glass, 5mm thick, thermal shock and impact resistant.
FinishEpoxy grey powder coated after phosphochromate treatment.
OpticsReflector made of deep drawn, virgin polished and anodized aluminium facetted sheet. Optics is designed for specificapplicationtoachievevery
narrow beam pattern varying from 5 to 10 degrees.
Lamp holderWhite PBT housing with brass contacts and SS clips.
Electric gearWired with flexible silicon wire using copper wound ferromagnetic ballast, power factor improvement capacitor and super imposed ignitor for reliable ignition upto terminal block.
MountingWall/surface mounting using 2 nos. fasteners. Optical housing attached with
flexible/adjustable arrangement to rotate/aiming light in desired direction.
Applications•Tallstructures•Accentlighting•Distantspotlights•Architecturalfacades•Bordersecurityareas
103
Technical Drawing
All dimensions are in mm
Technical Data
Ordering Code
Lamp Type
Nominal Voltage (V)
Mains Current (A)
Lamp Socket
Power Factor
CapacitorValue
LHFM16170C99LHBW07170036
1x70W MHSEQ/CMI-T 240 0.400 G 12 >0.85 10 mfd
LHFM16115C99LHBW20115036
1x150W MHSEQ/CMI-T 240 0.820 G 12 >0.85 20 mfd
295
Front View
Top View
215±2
385±
2
Ø205Side View
Brighten your Worldwith Havells LED
We are now in SOLAR street light.
Benefits of solar LED street lights 1. Fully Renewable and Independent Energy source.
2. Zero Carbon foot prints.
3. Easy to Install. Instant installation and ready to use.
4. No External cabling,Trenching required i.e eliminates the chance of accident due to electric shocks, No trenching & wiring.
5. Ideal solution for Rural and remote areas where power lines are not available.
6. Independent of Grid , the operational costs are minimum.
7. Green technology.
8. No maintenance in initial years
9. Immediate Returns on Investment.
Solar Street light systemA LED based solar street lighting system
consists of a PV Module, control electronics,
battery, and LED based luminaries, all suitably
mounted on a pole. The battery is charged by
electricity generated through the PV module
during day time and the luminaries provides
light from dusk to dawn.
Applications• Street Lighting
• Perimeter Security Lighting
• Park Lighting
• Campus Lighting
• Pathway Lighting
• Remote Area Lighting
• Farm Lighting
• Ship Dock Lighting
• Railway Yard Lighting
Why Havells Solar LED Luminaire
Havells LED Luminaries delivers the best in class lumen efficacy. They deliver the maximum light output (lumens) at the lower wattage .
About MPPT
Havells LED street lighting systems are designed with MPPT (Maximum Power Point Tracking) which provides about 25% more efficiency by utilizing maximum energy harvested by solar PV modules.
About Solar PV module
Highly efficient poly crystalline solar modules are used which are tested for longer durability & manufactured with innovative technologies. These modules are designed to withstand highly corrosive atmospheres and heavy wind loads. Also the modules are certified for industry standards IEC61215,IEC61730( safety class 1 & 11), IEC61701 and CE.
Product Offerings.1. Standard systems ( this is offered with Preset specification with various wattages to suit,
Specs of Govt., private and PSU’s)
2. Customized solutions can be offered with one to one meeting with end user.
3. Hybrid system which would operate on AC ( alternate current, i.e in presence of GRID supply and DC ( Direct current in ABSENCE of grid supply) it would work in Either Circumstances.
Havells – Lighting up the wayHavells India Limited is a USD 1.4 billion Indian multinational company. Havells is also the 4th
largest lighting company of the world. The company owns a large product portfolio in consumer
and professional lighting, and caters to indoor, outdoor and specialty lighting segments.
Havells’ strength is its manufacturing capability. Havells is the only company in India that
manufactures its entire lighting product portfolio in-house. The company has established a state-
of-the-art, technologically advanced manufacturing plant at Neemrana, Rajasthan to manufacture
luminaires and fixtures. The ultra-modern manufacturing plant is a replica of Havells manufacturing
in France, and contains sophisticated processes like robotic box bending machines. Supported
by German, Italian and Japanese technology, the colossal manufacturing unit is spread over 2
lakh square feet, and churns out 5 million CFLs every month.
Havells lighting business is strongly supported by its dealership network of over 20,000 across
the world. In 2007, the company made history by acquiring the legacy European lighting brand
‘Sylvania’. The acquisition strengthened Havells lighting in the global markets.
Professional Luminaires Lighting Solutions
Industrial Lighting & Area Lighting Catalogue 2015
LP/Z
HLR
C00
017/
/MA
R15
/OC
T15
REGIONAL & BRANCH OFFICES:
NORTH - REGIONAL OFFICE: Corporate Office: QRG Towers, 2D, Sector-126, Expressway, Noida-201304, Tel: 0120-3331000, Delhi: Tel: 011-47676700, 23888200, Chandigarh: Tel: 0172-4232400-401, Dehradun: Tel: 0135-6670202, Noida / Haryana: Tel: 0120-3331000, Ludhiana: Tel: 0161-4676000 / 24, Jammu: Tel: 0191-2478330, 2479330, Sri Nagar: Tel: 0194-2490431, Jaipur: Tel: 0141-3914645, 3988210 Jodhpur: Tel: 0291-9214201640 / 45, Lucknow: Tel: 0522-6672100, Kanpur: Tel: 0512-6710400, 6710409
EAST - REGIONAL OFFICE: Kolkata: ICC Tower, 5th Floor, 4 India Exchange Place, Kolkata-700001, Tel: 033-40129851 / 52, Bhubaneshwar: Tel: 0674-6668101/102/103/104, Guwahati: Tel: 0361-2134521, 2458923, 2460355, Siliguri: Tel: 0353-2525907, Ranchi: 0651-2244861, 2244862, 2244864, 2244868, 2244869, Jamshedpur: Tel: 0657-6542492, 09234369436, Patna: Tel: 0612-2207221, 2207222, 2207223, 2655518
WEST - REGIONAL OFFICE: Mumbai: 301, Everest House, 3rd Floor, 6, Suren Road, Chakala, Andheri (E). Mumbai - 400 093, Tel: 022-67298600-602, Ahmedabad: Tel: 079-40061111, 40060738-740, Indore: Tel: 0731-2572340-41, 4009998 (Airtel), Rajkot: Tel: 0281-2481112, 2921212, Nagpur: Tel: 0712-2240932, 2242692, 2242699 Pune: Tel: 020-64016413 / 14, Raipur: Tel: 0771-4243400 / 01, Surat: Tel: 0261-2350137, 9979890137, Jabalpur: Tel: 0761-4064491
SOUTH - REGIONAL OFFICE: Chennai: Sigapi Achi Building, No. 18 / 3, 6th Floor, Rukmani Lakshmipathy Road, Egmore, Chennai-600008, Tel: 044-42280600, 605, Bangalore: Tel: 080-49075000, Coimbatore: Tel: 0422-2305767, 2306199, 2305199, Hyderabad: Tel: 040-27533372, 27533355, 27533632, 66320407/0408/6401/6402, Kochi: Tel: 0484-4099000, Vishakapatnam: Tel: 0891-6514339, Vizag: Tel: 0891-6514339, Vijayawada: Tel: 91+9247058847/57, Calicut: 4954019194, Madurai: 09994493242, Trivandrum: 4714015323, Hubli: 09448146028, Trichy: 09944460160
Representative Offices: • Goa • Solapur • Gwalior • Kathmandu • Bhopal
Although every effort has been made to ensure accuracy in the compilation of the technical detail within this publication,however current details should therefore be checked with Havells Group. Specifications & performance data are constantly changing.
Industrial Lighting &
Arae Lighting C
atalogue 2015
Havells India Ltd. QRG Towers, 2D, Sector -126, Expressway, Noida - 201 304 (UP), Ph. +91-120-3331000,E-mail: [email protected], www.havells.comConsumer Care No.: 1800 11 0303, 1800 103 1313 (All Connections), 011-4166 0303 (Landline)Join us on Facebook at www.facebook.com/havells and share your ways to save the planet!
CIN - L31900DL1983PLC016304.
Pole Diagram for SOLAR street light:
LED
Controller
Highly effecient controller to charge yourbatter ies & microcontroler control led a lgor i thms for l ight management to ensure maximum uptime. Microcontroller managed algorithms autonomously determinesunrise & sunset.
Only Tier 1 make poly crystalline siliconsolar panels with high efficiency & longlifetime area used.
High Lumen LED modules for maximum efficacy with lifetime > 50,000 hrs & CRI nominal 70.Pressure Die cast Aluminium IP66 enclosure offer excellent water-proofing & humidity barrier.
Specific deep discharge batteries are used to store the energy, provide energy for immediate requirements, and enable a back-up for days when there is little or no sun.
High Lumen with Pressure offer excellent water-proofing & humidity barrieroffer excellent water-proofing & humidity barrierof
Specific timmediate requirements, and enable a back-up for days when there is little or no sun.
Top Related