Preparing the Job Aid
Side 1 Side 2
1. Print Side 1 on 11x17 paper (if you only have access to 8.5 x 11, set printing to reduce to fit paper – some alignment problems will result, however – this is designed for an end measurement of 11x11).
2. Flip paper over and print Side 2.3. Cut along outer borders using either side, then cut along “cut” lines (do not cut into
the white center area – only cut where the colors meet).4. Fold along lines A and B - white center area (PAQ Analysis Overview) is still visible on
the back.5. Fold along lines C and D – white center area is visible on back, and quadrant overviews
are visible on front.
(See next page to make sure you’ve folded it correctly and for usage.)
A
B
C Dcut
cut
cut
cut
A
B
C D
Using the Job Aid
Back – Overview of the PAQand PAQ Analysis
Unfold the second fold of a quadrant to review the common solutions for
problems in this quadrant
Front – Overview of each quadrant of the
PAQ
Unfold the first fold of a quadrant to review the
indicators (and non-indicators)
Top Related