Technology training that works
Practical Electrical Substation Safety for Engineers & Technicians
Technology Training that Workswww.idc-online.com/slideshare
Overview
• Hazards of general nature in industrial installations • Electrical hazards
– Direct and Indirect electric shock
– The deadly combination of heights and electric shock
– Hazards due to arcing/flashover
– Hazards from use of electrical equipment in explosive environment
– Hazards due to high temperature in electrical equipment
– Need for periodic inspection and maintenance for safe operation of electrical equipment
Technology Training that Workswww.idc-online.com/slideshare
Electrical Hazards
• Electric shock and associated effects• Injuries by electric shock combined with fall• Burns on skin at point of contact• Internal organ damage due to passage of electricity through body• Flash-over causing external burns
Technology Training that Workswww.idc-online.com/slideshare
Mechanical hazards
• Injuries from moving parts of static machinery• Injuries from moving vehicles• Injuries from falling objects (including head injuries)• Injuries from flying objects following an explosion• Injuries to eye from moving particles• Injuries to eye from prolonged exposure to bright light• Loss of hearing due to prolonged exposure to noise
Technology Training that Workswww.idc-online.com/slideshare
Hazards from toxic materials
• External contact on skin and eyes
• Ingestion
• Inhalation
Technology Training that Workswww.idc-online.com/slideshare
Dealing with fire hazard
• Fire is often initiated by other hazards (electrical, explosion due to hazardous gases present in the environment etc.)
• Once initiated, it can be self sustaining
• Dealing with fire:– Prevention is often the best way– Alarm of incipient fire before it spreads– Fire fighting measures as appropriate
Technology Training that Workswww.idc-online.com/slideshare
Hot surfaces/liquids/gases• Many electrical equipment have fairly high surface temperatures• Many industries also handle materials at high temperatures• Effects:
– Burns due to contact– Explosions (e.g. molten steel and water)
Technology Training that Workswww.idc-online.com/slideshare
Handling of cold liquids
• Burns due to contact
• Explosions (e.g. liquid oxygen)
Technology Training that Workswww.idc-online.com/slideshare
Handling of corrosive liquids• Acids and alkalis are corrosive
• Safety issues– Burns/irritation due to contact with skin– Loss of sight or serious injury of eyes– Danger of ingestion– Danger of inhalation (fumes)
Technology Training that Workswww.idc-online.com/slideshare
Handling of explosive gases• Explosion by formation of explosive mixtures of
combustible gases and oxygen in air• Source of ignition is often electrical• Effects
– Burns by fire accompanying explosion– Injuries from flying objects following an explosion– Damage to limbs/internal injuries
• Prevent– Formation of explosive mixtures– Ignition– Damage due to explosion
Technology Training that Workswww.idc-online.com/slideshare
Electric shock-Reasons
• An electric shock can happen– Due to exposure to live parts (Direct contact)– Due to exposure to parts that accidentally become live
(Indirect contact)
• Due to potential difference in the ground under certain conditions
Technology Training that Workswww.idc-online.com/slideshare
Electric shock-Effects
• Causes current flow through body
• Causes muscular contraction
• Can cause stoppage of heart/breathing
• A shock is often accompanied by a fall– A non-fatal shock can result in a fatal fall– While working on electrical systems at heights, adopt
preventive measures to avoid a fall
Technology Training that Workswww.idc-online.com/slideshare
Burns
• An electrical short circuit is accompanied by arcing• Extent of arcing depends on
– Fault energy level of the system (VA)
– Time of fault clearance
• High energy faults can cause melting of components– Copper/aluminium conductors
– Steel parts of enclosure
– Results in deposition of toxic copper salts on the skin
Technology Training that Workswww.idc-online.com/slideshare
Temperature hazards
• External surfaces of electrical equipment often attain elevated temperature– Example: Bus ducts can often attain surface
temperatures of over 60 Deg C
• Exposed conducting parts can attain even higher temperatures– Example: Bus bars often run at temperatures in excess
of 100 Deg C
Technology Training that Workswww.idc-online.com/slideshare
Fire hazard
• An external fire can often result from an electrical fault– Example: A wiring short circuit and presence of
combustible substances in the vicinity
• Certain electrical equipment contain inflammable substances and improper handling can result in fire– Example: Large transformers with mineral oil for
cooling
Technology Training that Workswww.idc-online.com/slideshare
Reasons for Electrical accidents• Failure to isolate or inadequate or insecure isolation (60%)• Poor maintenance and faulty equipment (30%)• Insufficient information about the system being worked on• Carelessness and lack of safe procedures
Technology Training that Workswww.idc-online.com/slideshare
Summary of safety measures
• Safe design/installation of plant and equipment• Safe operating and maintenance practices• Appropriate knowledge on the part of workers
– Training – Certification
• Warning signs at points of hazard• Use of equipment/sensors to warn incipient problems• Proper periodic inspection and prompt repairs
Technology Training that Workswww.idc-online.com/slideshare
Structure of an electrical system• Incoming circuit• Step-down transformer• Primary distribution • In-plant generation (Primary)• Step down transformer• Secondary distribution• In-plant generation (Localised/secondary)• Local distribution centers (MCC/DBs)• Uninterrupted power supplies to specific critical loads• Loads on primary and secondary distribution system
Technology Training that Workswww.idc-online.com/slideshare
Main components-1
• Generation equipment - (Captive generation in industry)• Step-up/step-down Transformers• Transmission lines (long distances)• Cables (Medium distances)• Bus ducts (Short distances)
Technology Training that Workswww.idc-online.com/slideshare
Main components-2
• Distribution equipment– Isolation equipment (for safety purposes)– Bus bars– Switching equipment (circuit breakers/contactors)– Instrument transformers– Protection equipment
• Loads– Motive, Heating, Lighting
• Uninterrupted power supplies with battery
Technology Training that Workswww.idc-online.com/slideshare
Potential hazards-1
• Generation equipment– Electric shock, flash-over, mechanical hazards
• Transformers– Electric shock, flash-over, fire hazard
• Overhead Transmission/distribution lines– Electric shock, flash-over, fall from heights
• Cables– Electric shock, flash-over, fire hazard
Technology Training that Workswww.idc-online.com/slideshare
Potential hazards-2
• Bus ducts– Electric shock, flash-over, thermal hazard
• Distribution equipment– Electric shock, flash-over, thermal hazard, fire hazard
• Motive equipment– Electric shock, flash-over, thermal hazard, mechanical hazards
• Heating equipment– Electric shock, flash-over, thermal hazard
Technology Training that Workswww.idc-online.com/slideshare
Potential hazards-3
• Lighting equipment– Electric shock, flash-over, thermal hazard, fall from heights
• Uninterrupted power supplies with battery– Electric shock, flash-over, hazards from corrosive liquids and
explosive gases
Technology Training that Workswww.idc-online.com/slideshare
DO YOU WANT TO KNOW MORE?
If you are interested in further training or information, please visit:
http://idc-online.com/slideshare
Top Related