•...'.-=..='.. -:.
I.1 At,/obsite, Supply Co. ..4 ..
P'4•19)i295•6100 Phone - *'i
VT.4..,·....(619) 29516300.Fax , . .3 ....:31:,
f--*dRiL#Lagi.__:.3" · r
COMPACT CORDLESS DRILLS
0602-22 3/8" DRIVER/DRILL
12 Volt
280 in.-lbs. torque
0612-22 1/2" DRIVER/DRILL
14.4 Volt
390 in.-lbs. torque�042Compact size.
. Exclusive Clip-LokTM system -
secure tool or work light to belt
with one hand.
�042Two speed gear box with all
metal gears: 0-400/0-1,400 rpm.�042Single-sleeve ratcheting chuck.
�042Soft-grip handle reduces fatigue.
�042Kit includes driver/drill, Clip-Lok
system, two batteries, universal
charger, bit and impact resistant
carrying case.
14AV IMPACTS
--�036.----•----
'r.f="=----,4. . '.'P..:9#1 .
- I .�442"r
r-,%,-r. ...."---113"Rfi/ -/ '
.--..tjt<55 . .1
TIJ
ilill---»...1
A•...•
9081-22 1/4" Hex Drive
�042Powerful- Delivers up to 740 in.
lbs. of torque.
�042Ught weight - Allows the user to
work longer with less fatigue.�042Durable - Equipped with a
heavy-duty, die-cast, aluminum
gear housing for extreme durability.
�042Hard hitting - Produces up to
2500 impacts per minute.
9082-22 3/8" Square Drive
�042Powerful- Delivers up to 1,050
in. lbs. of torque.�042Light weight- Allows the user to
work longer with less fatigue.
�042Durable - Equipped with a
heavy-duty, die-cast, aluminum
gear housing for extreme durability.
�042Hard hitting - Produces up to
2500 impacts per minute.
9083-22 1/2" Square Drive
�042Powerful- Delivers up to 1,400
in. lbs. of torque.
�042Light weight - Allows the user to
work longer with less fatigue.
�042Durable - Equipped with a
heavy-duly, die-cast, aluminum
gear housing for extreme durability.
�042Hard hitting - Produces up to
2500 impacts per minute.
Milwaukee 1'4 ..4 . r
144V CORDLESS DRILLS
elifiRM - 11 1----•. 0/5
0614-24 Hammer Drill
0616-24 Driver Drill
�042All-metalratcheting chuck with
carbide jaws for tfie highest grip
torque on bits.�042Milwaukee-built motor provides up
to 460 in./lbs. of torque.
�042Up to 50% more run-time than
competitive products.�042Milwaukee's exclusive reversible
battery allows users to adjust
balance and get into tight spaces.
18V CORDLESS DRILLS
CJ-..P-.
*iglili•ilimi d•El.•j-4< 2 " 'amg
A •
\,I-'•Al1. 1/aa-r .--•li
Imil
0622-24 Driver Drill
0624-24 Hammer Drill
�042All-metalratcheting chuck with
carbide jaws for the highest grip
torque on bits.�042Milwaukee-built motor provides
up to 495 in./lbs. of torque.
�042Up to 50% more run-time than
competitive products.�042Milwaukee's exclusive reversible
battery allows users to adjust
balance and get into tight spaces.
18V IMPACTS
t'* ; P .i.-42 MA' 11,11;
.2*.- .1-1 ... ..,¥.'1==%.
'- i ' ..t9�036lillilf. , i I :-- Im
... ....., h -
/4-5 ,
8. 4.
9079-22 1/2" Square Drive
�042The MOST TORQUE of any
cordless impact wrench! 240 fL lbs.�042Great balance and a soft-grip
handle.�042Reversible battery pack makes
getting into tight spaces easy.
9078-22 3/4" Square Drive
�042325 fL lbs. maximum torque
�0423/4" Square drive with friction ring
and hole socket retention�042Reversible battery pack makes
getting into tight spaces easy.
.;S i
...fr.:71- t•''Flt..% - . . .....'..:... 1,t.:- .,af.'..t.......1. c.'I.·....6*.--.i..
'9• $
43
......
4.- 0
T .
F-
-4.1•3'1
.....= ===» .* ./ ....... .=C« -.... =... ». ,=* -=�036-= « . I 1
Jobsite Supply 135
1=«=• =. *......«='.",=."�036-'-"I.'."«:,« . t-' :' : . . : - f •, '."I . , . - 1. , ... ... , I I. . - . ' . ...==.«'=="»'="==-
..-*FF*4*4 41
31fril:•2/*"0-Wa•
'.:-blgi:*-:' A .4: 1'2
- : A... ...-1,-�254IL-=1.---·-2 -9 e•'310---5, Vijil
.,
4, - .... �036
1-- ..- I -2.
6514-21 Hatchet Sawzall
18V TOOLS
�04218Volt, 2.4 Amp-Hr. Power-Plus
Battery for long run time.�042Orbital action selector for
aggressive wood cutting or straight
reciprocating action for metal and
plastics.
�042Powerful 18 volt rare earth
motor easily handles all Sawzall
applications.
�042Cuts up to 85 2 x 4's on a single
charge.
6514-29 Sawzall Hatchet Kit
�042TheHatchet Cordless Sawzall - 18
Volt, convenient, built for tight spaces,
orbital cutting action,
keyless blade clamp, pivotal
handle, 2700 spm, soft-grip handle.
�04218 Volt Work Light - pivoting head,
Xenon bulb, 2 position hook�042Universal Battery Charger with two
18 volt batteries.�0423 Corrosion Resistant Stainless
Steel General Purpose Sawzall®
blades.�042Heavy Duty Contractor Bag original
Mossy Oak pattern, 21 pockets to
hold tools and gear.
-+Ulli \ 6515-27 Sawzall
44 F*10.., I , D..
- 19,1: .3...,1
-· r.5.
�04218volt 2 4 amp hr Power-Plus
battery.�0421 inch stroke length for
aggressive cutting, 0-2000 strokes
per minute.
�042Powerful 18 volt rare earth motor
easily handles all Sawzall
applications.
�042Cuts up to 72 2x4's on a single
charge.
6310-22 6-1/2" Circular Saw
�042Cutsmore 2 x 4's per battery
charge than any other cordless
circular saw.
�0426-1/2 in. blade easily cuts 2x
material at 45 degrees.�0422.4 amp.-hr. battery provides
20% more run time than other
Ni-CAD batteries.�0423,200 rpm with electric brake,
great balance.
c/h Jobsite Supply Co. -.1 ,
•:B (619) 295-6300 Phone '
;.\'-5- • (619) 295:6300 Fax...'-
�042Cutsall types of m
6320-22 6-1/2"
...7 .*3, f�036---.r.• studs.uni-strut, galvanized
e..,1.d I �0423,200RPM and 2-1p ... . 4. ./�036=..e..'E Th ' depth of cut11.... 6:, ,<19""01:amma �042Clearguard provide
<3 5.. 2 . -SE.f=-- line of sight for cutti
�042Electricbrake for c.- 1
I.-I-•
'2 - -99-,-1•
i is--C. i
0 -
-Ju/im- --Er 1 -*.*337/•.,
0.. 1 .F.
.
5361-24 3/4" S
�042Powerful18 volt ra
easily handles most
concrete.�042Drills up to 54 hol
x 1 -1/2 in. deep into
single charge.�042Trigger speed con
greater user control�042Battery works wit
18 volt Power-Plus '
3109-24 1/2" R
�042Powerful18 volt ra
easily handles ALL r
drilling applications�042Drills up to 60 ho
inch auger bit on a�042Trigger speed cor
greater user control�042Battery works wit
18 volt Power-Plus
1109-241/2" [
�042Powerful18 volt ra
easily handles ALL
boring applications.�042Drills up to 96 ho
inch auger bit on a�042Trigger speed con
RPM allows greater�042Battery works wit
18 volt Power-Plus
Metal Cutting SE
atals such as
pipe and metal
/8 in. maximum
s an excellent
ng.
uick stops.
DS Rotary Hamir
re earth motor
drilling into
es 1/4 in.
concrete on a
trol allows
i all Milwaukee
.Ools.
.A.D.
re earth motor
ight-angle
es with a 1 -1/2
single charge.
trol allows
h all Milwaukee
tools.
-Handle Drill
re earth motor
jrilling and
les with a 1
single charge.
trol from 0-500
user control.
h all Milwaukee
tools.
..�036 f.»,•«.,»»»:"*...:.,3�036..«».==..=t»«»=«»«*-*-·'*»'»t"i
... »3. :>. -•·2•. . 3.6-: - ·. ...
4 'r:· 4·....> .1�036·2.'·-"A-
4. Milwjukee•"i--:.1.:E. . , ".:...:i::t · 1 �042.:· - · �042.�042-'-- A---_---Lc•*.-,1*•.4 9-6.,+ 4, i .4, t. ' 1,14. -,-- + -4' 1 - ....--- 6 .1*6.- ..-/I ·•,6/
r'*1
29 .
•�0361=�036'«»=-».,=:.:'...=«.*.*.�036»'-I..,1,«»-:%#...:'.....</.'..=»=t'�036===»....-....':'.==«».====,===»=1»="='=«».===. ,
136 Jobsite Supply
•h..Jobsite·Supply Co..,
4123.j619) 295,6100 Phone
(619) 295-6300 Fax.,-S...
18V COMBO KITS
0901-28 2 Tool Combo Kit
�042Hammer Drill features an
74 .-lill./1- all-metal ratcheting chuck with
carbide jaws for the highest grip
3........5.*A '*S torque on bits.Jaili&:11,--lb �042Milwaukee-built motor provides
•·.,r=,.4: 1 up to 495 injlbs. oftorque.
<.2 l..../) O Sawzall® has 1 in. stroke, 2700
"85--' spM, keyless clamP.�042Milwaukee's exclusive reversible
battery allows users to adjust
balance and get into tight spaces.
0902-28 2 Tool Combo Kit
C-• �042HammerDrill features an
/ ··. illijlllll all-metal ratcheting chuck with
.L: *2.-'i--P6-3• torque on bits.
carbide jaws for the highest grip
9,21-tgrf.'A-*em �042Milwaukee-builtmotor providesf -• - - up to 495 in./lbs. of torque
�042Circular Saw cuts up to 145 -
2x4's on one charge!�042Milwaukee's exclusive reversible
battery allows users to adjust
balance and get into tight spaces.
t.• 0903-28 2 Tool Combo Kit/
�042Hammer-Drill features an-.EFill.lh* _lillI.l . Al".2
rr-/...t/4/...../4.t•-:5 all-metal ratcheting chuck with
\1&•IlZ-4/ carbide jawsforthe highest grip
Ar#Fr torque on bits.
u.illf�0364)2:9" �042Milwaukee-built motor provides up
er,-i h to 495 in./lbs. of torque.21.4.4:-S/ 0 The HatchetTM features a 6
position pivoting handle and an
Orbital action selector for aggressive
wood cutting or straight reciprocat-
ing action for metal and plastics.�042Milwaukee's exclusive reversible
battery allows users to adjust
balance and get into tight spaces.
0904-28 2 Tool Combo Kit
�042Hammer-Drillfeatures an
all-metal ratcheting chuck with
carbide jaws for the highest grip
torque on bits.�042Milwaukee-built motor provides
up to 495 injlbs. of torque.
�042The Metal Cutting Saw cuts all
Mpes of metals such as uni-strut,
galvanized pipe and metal studs�042Milwaukee's exclusive reversible
battery allows users to adjust
balance and get into tight spaces.
Milwaukee
0912-29 4 Tool Combo Kit
�042Hammer-Drill provides up to 495
.··&All•lilill:i••.lin./lbs. of torque and features an
f�254LSFI.*3.fr all-metal ratcheting chuck with
--r s t*•iriL�254*3carbide jaws forme highest grip0- fr-- -kilizilh.:.1 torque on bits.
=I'l �042Sawzall® has 1 in. stroke, 2700
SPM, keyless clamp.�042Circular Saw cuts up to
145 - 2x4's on one charge!�042Milwaukee's exclusive reversible
battery allows users to adjust
balance and get into tight spaces.
•
.»#9.Momiff:ill kilili;ill
0923-29 4 Tool Combo Kit
�042Hammer-Drill provides up to 495
in./lbs. of torque and features an
all-metal ratcheting chuck with
carbide jaws for the highest grip
torque on bits.�042The Hatchet�442features a 6
position pivoting handle and an orbital
action selector for aggressive wood
cutting or straight reciprocating action
for metal and plastics.
�042Circular Saw cuts up to 145 - 2x4's
on one charge!�042Milwaukee's exclusive reversible
battery allows users to adjust balance
and get into tight spaces.
0923-25 5 Tool Combo Kit
�042Hammer-Drill provides up to 495
in./lbs. of torque and features an
all-metal ratcheting chuck with
carbide jaws for the highest grip
torque on bits.�042The Hatchet�442features a 6
position pivoting handle and an orbital
action selector for aggressive wood
cutting or straight reciprocating action
for metal and plastics.
�042Circular Saw cuts up to
145 - 2x4's on one charge!�042The Job Site Radio features
Rockford Fosgate® Sound System
w/Punch EQ and a rugged
construction that withstands 8 ft. drop
to concrete.
..,t/
-I- .&+•jr4 - -- 1 .ts�042=... : :...- - -7.:. ..9.
..
.'2:1
Jobsite Supply 137
5, . I. 1 . , ..Pt.... '..f:< Ii:..t :.";:'..... ...
A --Milwaukee»«.....-(...:; 3=" 1:9.11. ;..,•1 '.. i j.
CAULENG GUNS
*• =2,10'z. Size*rl 6560-23 Quart Size
»•-
�042Manualdutch release for
rapid loading of material
6560-24 20 oz. Size
�042"SausageFormat"
�042Dramaticallyreduces user fatigue when compared to manual
application.
�042Expelsover 135 (10 oz.) tubes of latex per battery charge.
�042620pounds of pushing force easily handles high viscosity materials such
as windshield urethanes.
�042Variablespeed switch for better flow control.
ACCESSORIES
48-08-100010 oz. Carriage
�042Acceptsall standard 10 oz. tubes/cartridges.
48-08-1010 Quart Carriage
�042Acceptsall quart size tubes/cartridges.
48-08-1020 10 oz. Sausage Style Barrel
�042Fitsstandard 10 oz. "sausage style" material packs.
48-08-1030 20 oz. Sausage Style Barrel
�042Fitsstandard 10 oz. "sausage style" material packs.
49-52-0525 Plunger Rod
�042Foruse with 48-08-1010 quart size carriage.
49-52-0500 Plunger Rod
�042Foruse with 48-08-1000 10 oz. carriage and 48-08-1020
"sausage style" barrel.
49-24-0200 Job Site Radio
�042Operateson standard AC or
Milwaukee 12,14.4, or 18 Volt
battery packs.
�042Digitaltuner with 20 AM/FM
presets.
�042Ruggedconstruction, withstands
8 foot drop to concrete.
�0427channel weatherband receives
N.O.A.A. weatherbroadcast (where
available).
1.... : a..1\ Jobsite.Supply Co.
(619)295-6100 Phone
•• ' 4. 4.'·'.:-•'•'(619) 295-•00 Fax
CORDLESS ACCESSORIES
2.4 AMP/HR BA
48-11-2230 18
FJ•,4•• 48-11-102414.
2*. - """"-Ii..3•1•• 48-11 -1970 12
CHARGERS
48-59-0255 Un
48-59-0186 12
':P. �042The Universal Pow-'#*hf 1�254-f+ • volt AC charger will r
. ........EST'*/ #tt�042h..3 .. ':-' .• : -31 ·.-c' f. :« 14.4V and 18V POWE
\«r«. f // Batteries. RechargesCadmium and Nicke
batteries. Charges ba
hour.
11' C '5>3 .)jj i
-.IAA..
1.1.1 ':.t rl./.Fi., 111$7 © 1 : U. 1.1511. 11! p..-
, 1 4 .::=.: .. ..i :.. t.1-.. , .1...%/.... . ., • -,. '. lillI
•
48-59-0265 M
�042Simultaneously ch
L three battery packs,, combination 12 volt
�04245-minute fast cha
down time.2 �042Top-Off Mode furth
'-· each cell for addition
performance.�042Durable constructi
charger in a harsh jo
environment�042For use with all M
on style battery pack�042Impact resistant b
ultimate protection i
conditions.
TTERY PACKI
Volt
4 Volt
Volt
iversal Charger
Volt Auto Charg
er Plus 120
echarge 12V,
r Plus.
both Nickel
Metal Hydride
tteries in one
ulti-Bay Charger
arge up to
)f any voltage
- 18 volt
rge minimizes
er charges
a1
on protects the
b site
Iwaukee slide-
S.
ase provides
1 job Site
FLASHLIGHTS
49-24-0155 12-14.4 Volt
49-24-0165 18 Volt
REPLACEMENT BULBS
49-81-0020 12-14.4 Volt
49-81-0030 18 Volt
....t' ·'5 ·-*
.
1-31.
-_1!. 61 & 1. & 1=tzil. /
4 &' . .
61.Sll�442.14-iml ./185#(/d
-.P
138 Jobsite Supply
/2\'.Jobsite.Supply Co.-••(619)'295•6100 Phone
(619) 295.6300IFax
7.-36.'.izik .-3(:,�036•_...1_-1-•.Milwaukee -
0928-29 V28 4-Pack Combo Kit V28 6-1/2" Circular Saw V28 Sawzall Recip Saw V28 Hammer-Drill/Driver
�042Seespecifications below �042Seespecifications below �04228Volt high power motor delivers
d....2 V28 Work Light 28 Volt Lithium-lon Batteries 600 In.-lbs. of torque.ilill'Mill:/1/"Aj"Bil£"t �042Heavy-duty2-speed gear box:
m<L-1 �042Facetedreflector offers bright �042Upto 2X run time of 18V tools.0-600/0-1800 RPM;
7./.-.--)(.3-31 uniform beam. �04228Vof power with 18V weight.0-9000/0-27000 BPM.
= 3- .A• �042Compatiblewith Clip-Lok belt �042Batteryfuel gauge that displays�042Ratching,single-sleeve chuck
de *3 with carbide jaws.attachment. remaining run time.
�042Nomemory effect.�042Clip-Loksystem secures tool to
Kit Also Contains: Work Ught �042Clip-Lok System �042Side Handle �042(2) V28 Lithium-lon battery packs �042Charger �042belt with one hand.
�042#2 Philips Bit �0426-1/2" 24T Carbide Blade �042Rip Fence �0422-Pack Sawzall Blades �042Heavy Duty Contractor Bag �042
*i.....TIFITig'-41 -All.
l
�042KitContains: Tool with Clip-Lok
system, Belt Clip, Side Handle (2)
V28 Lithium-lon Battery Packs, #2
Phillips Bit, 1-Hour Charger and
Impact Resistant Carrying Case.
-1.J......---Z--1-r,-16�042KitContains: Tool, (2) V28
Lithium-lon Battery Packs, 2-Pack
Sawzall blades, 1-Hour Charger
and Impact Resistant Carrying
Case.
40/0. .. dil
[:. 240-<6�036.8:.»
3: * >..., I
\.. ' .L-= - ./
�042KitContains: Tool, V28 Lithium-
lon Battery Pack, Band Saw
Blade,1-Hour Charger and Impact
Resistant Carrying Case.
0724-24 KIT
V281/2" Hammer-Drill/Driver
�042Upto 2X run time of 18Vtools.
�042Ughtweight,28V of power with
18V weight.
�042Consistentpower from the first
hole to the last.
�04228Volt high power motor delivers
600 In.-lbs. of torque.
�042Heavyduty 2 speed gear box:
0-600/0-1800 RPM;
0-9000/0-27,000 BPM.
�042Ratcheting,single sleeve chuck
with carbide jaws.
�042Clip-Loksystem secures tool to
belt with one hand.
0719-22 KIT
V28 Sawzall Recip Saw
�042Upto 2X run time of 18V tools.
�042Lightweight,28V of power with
18V weight.
�042Consistentpower from the first
cut to the last.
�04228Volt high powered motor.
�042Variablespeed trigger:
0-2000/0-3000 SPM.
�042KeylessQuick-Lok blade clamp.
�0421-1/8"stroke for fast cutting.
�042Exclusivegear protecting clutch.
0729-21 KIT
V28 Portable Band Saw
�042Upto 2X run time of 18V tools.
�042Over200 cuts of 1" conduit per
charge.
�042Consistentpower from the first
cut to the last.
�042Optimalcutting speed:
0-225/0-350 SFPM.
�042Full4.75 x 4.75 cutting capacity.
�042LEDlight for cutting visibility.
0779-22V281/2" Impact Wrench
�042Upto 2X run time of 18V tools.V -=. i :�036f
i /*. �042Lightweight,28V of power with
18V weight
�042Consistentpower from the first
bolt to the last.
�04228Volt high power motor delivers... 325 ft.-lbs. of torque.
.'. - �042Variablespeed trigger control
delivers 0-1450 RPM; 0-2450 IPM.�042KitContains: Tool, (2) V28 Uthium �042Comfortablenon-slip, soft-grip
lon Battery Packs, Hanger Bracket handle.
with Steel Ring, Round Head Detent
Pin Accessory, 1-Hour Charger and
Impact Resistent Carrying Case.
/*\\d.(4:7---�036r-- .*,Ain
4. O Wi
W rj ;1 -:.. .1•--... . h.# I .., .=»--
.--- -4f.-- -.--/.i ...21>
�042KitContains: Tool, (2) V28
Lithium-lon Battery Packs, 6-1/2"
24T Carbide Blade, Wrench, Rip
Fence, 1-Hour Charger and Impact
Resistant Carrying Case.
S>.-6/ele:*.0 ,
0730-22 KIT
V286-1/2" Circular Saw
�042Upto 2X run time of 18V tools.
�042Ughtweight,28V of power with
18V weight
�042Consistentpower from the first
cut to the last.
�04228Volt hight powered motor
delivers 4200 RPM.
�042Electricbrake, quick blade stops.
�042Cutsfaster, longer, more power
than any 24V unit on the market.
�042All-metalupper and lower blade
guards.
48-59-2801 V28 Charger
49-24-0185 V28 Flashlight
48-11-2830 V28 Battery
49-81-0040 V28 Bull)s'-wid ,
49-59-2801 49-24-0185 4941-2830
Jobsite Supply
*2i»- :-/3- -/
3,Eae
2.· .i>...
,.
-·.,7,·A·* -.'.'· ..;-'
_TZ·1.�036.·__·.__ •.h, �042.4- 4.'L-•-.· --
.
139'
I .» '. . ... ,
I,I,/1 - '..
2 -- Milw•uke.elt '-�036
'Sfi:�036:1-4.__33.;fliI..51·iyE'... i.-3\1
../
I.1
*fi-* I
•%1
•;Wi'==r'....-,lirs'Sm' .- kilk",B......
7/li
7
0101-20 0-4000 RPM
0100-20 0-2500 RPM
A '. lij .'•·. . :·I 1 3 Jobsite Supply Co.
.i·. . ... 1•2:=3 (619) 295-6100 Phone*0 r. /4 ' ·
.... .. ....0 :.0<1 ,- (619) 295-,6300.Fax
ELECTRIC DRILLS
�042Powerful7.0 Amp Milwaukee
Motor.
�042Variablespeed control.
�042Ergonomictactile grip on handle
and motor housing.
�042Allball and roller bearings.�0428'3-wire Quick-Lok® Cord.
0233-21 3/8" Keyless
0234-6 1/2" Keyed
�0425.5amp motor, 0 to 2800 rpm,
trigger speed control with
reversing.
�042Heavy-Dutyindustrial all metal
two sleeve keyless chuck.
�0428'2-wire rubber cord.
�042Exclusivebrush cartridge system
changes brushes in less than one
minute.
0200-20 Keyed
0201-20 Keyless
�042Powerful7.0 amp motor, 0 to
2500 rpm, variable speed control.
�042Allmetal grip-lok 2-sleeve
keyless chuck for a stronger hold
on the bit.
�042Allmetal gear case and
diaphragm.
�04210ft. 2-wire rubber cord.
�042360° locking side handle.
�042Ergonomictactile grip and two
finger trigger for user comfort and
balance.
..#•C -='..
1
- ...... · ----- - -li-
2- :r-61\_. 1,-a*.r,
CWW
0299-20 Keyed
0300-20 Keyed
Cushio
0302-20 1/2" Ke
�042Powerful 8.0 Amp
Motor.
�042Variablespeed con-
�042Allmetal gear case
�042Newswitch with tv
�042Modularbrush card
�042Allball and roller bp
Exclusive 0302-20 F
�0428'3-wire Quick Lok
�042All-MetalGrip-Lok'
Chucks.
with
n Grip
yless
Milwaukee
.rol, 0-850 RPM
and diaphram.
to finger trigger.
design.
.arings.
eature
® Cord Sets.
' Keyless
3300-1 1/2" Magnum R.A.D.
�0421/2in. capacity in s
up to a 2-9/16 in. sE
�042Triggerspeed contr
ranges: 0-565/0-127
reversing.
�042Powerful5.5 amp m
�042Headand handle s
3107-6 1/2" R.A.D.
�0421/2in. capacity in :,
up to a 4-5/8 in. sel-
�042Triggerspeed cont
ranges: 0-335/0-751
reversing.
.Powerful 7 amp mo
�042Headand handle s
teel, handles
Ifeed bit.
01 in two
5 rpm,
otor.
Nivel 360°.
leel, handles
eed bit.
*ol in two
)rpm,
tor.
wivel 360°.
140 Jobsite Supply
3 -
..t:I ...,.R.
<7 ill:'. f*.'.
7 - R.
. .... .-S.- ....: 2 4 - - s
' .'I FY.*Jeibsita)Sup#/y Co. ..,2 .1 -
4,•IL•,261'9)•2981'610-0 Phatie ' -'<i.t
#t\•·S.-'188191 *61(101Ff1k , 2,2582..•.·S.···•1 ---·.t,:..4. :. .
I
-Ntt
LARGE DRILLS
/1/•...1
7allillllmmilizillillmllt/"Ill."
161.0-1 650 RPM
1630-1 900 RPM
1660-6 450 RPM
�0421/2in. capacity in steel.
�042Powerful7 amp motor.
�042Heattreated gears are Helical-Cut
for quiet performance.
1670-1 900 RPM
1675-6 300/1200 RPM
�042Handlesup to 2-9/16 in. selfeed
bit
�042900rpm, reversing.
�042Powerful7.5 amp motor..
�042Powerful,yet compact for large
hole drilling between joists and
studs.
1680-20 450/1700 RPM
�042Clutchin low speed.
�042Highoperating speeds for
maximum productivity.
�04290° left-right, Roto-Lok handle for
maximum operating comfort
�042Easytum gear shift knob.
�042Comfortgrip switch handle and
gear case with front T-bar handle.
n.'' �042.1-/• ..�042
4 .92-Milwaukee •
... �042e·Si..4 I:: f
SCREW GUNS
- 6740-20 General Purpose..lill- Screwdriver......1
�042Powerful6.5 amp motor, 0 to
-• 2500 rpm, variable speed control.
• �042Ramp-offdepth locator for easy
ldepth adjustments.
�042Allmetal gear case and
diaphragm.
�04210ft. 2-wire rubber cord.
�042Ergonomictactile grip and two
finger trigger for user comfort and
balance.
�042Removablebelt clip with bit
storage.
_• 6790-20 Tek Gun
-»9• 6791-21 Remodeler's Kit-•'«1-
'•• �042Powerful6.5 amp motor, 0 to
• 2500 rpm, variable speed control.
• �042Ramp-offdepth locator for easy
•- depth adjustments.
• �042Allmetal gear case and
diaphragm.
�04210ft 2-wire rubber cord.
�042Ergonomictactile grip and two.
finger trigger for user comfort and
balance.
�042Removablebelt clip with bit
storage.
6791-21 Includes:�0422depth locator assemblies.
�042#2drywall bit tip.
�042Magneticbit tip.holder.
�0423-pieceslotted bit set.
�0423-piecehex socket driver set.
ADJUSTABLE CLUTCH SCREWDRIVER
*I6580-20 0-1200 RPM
6581-20 0-2500 RPM
�042Powerful6.5 Amp Milwaukee
Motor.
�042MultiPosition Torque Sensitive
Clutch - 10 - 140 in-lbs.
�04210fL 2-Wire Quik-Lok Cord.
�042AliMetal Gear Case and
Diaphragm.
,:.
....1.
. ... *29·.-73. ·.· : . I....,, - ...:::A....4..fi:36.4 . I .- . , .., - :.r.f te . ..r. 4 .. : .
$.......... .·
616<4•
-=�036-�036---=.-------=====�036--.--==�036=====�036...==t,»..====-�036I'=t.�036�036,•-=«. S"S=».»»»,==,»«««�036".'t.-#•-*-**4
Jobsitesupply 141
: RK.G. .., ... ' "16..... '..... .
'.- I -7 »•F:c 1 - Ait I
" ..,1 .1,1.-.
. ..S... p, '1,>Dr., ", �036ki'i:1•Ii;, ·
.h--:fy:.4.5.. .3, ··12'•56·A.'-A 1 '· FA .· • '·•'1·4" ·• ' •'. ..: . '-': .l.i,•4'AA<: ir-74. ': b*,1 -0-•, .-4.::7:•1·i' ' 4• t....•·· -':9•i -",6,�036....'1.'r.' "•r.,' '* i':-.' ' i,4, .. .....FL:.:• '•'·,6'�036:-':-·.:'·1·91:: ,; -7 :. '.813... .· • •10:•-··-12--.'.bl...'. .. .-
IMPACT WRENCH
9070-20 1/2" 300 FT/LBS
9075-20 3/4" 380 FT/LBS
�042300ft. lbs. of torque - more
torque saves time .
�042AC/DCrocker switch for quick
selection of forward and reverse.
�042Powerful7.0 amp motor, 1800
RPM and 2600 IPM (no load).
�042Ughtweight (6 lbs.) with
balanced feel and cushioned grip.
�042Pindetent system to securely
retain sockets and adapters.
HAMMER DRILLS
. i *
-rl
5392-6 3/8" Hammer Drill
�0423/8in. capacity, 5.0 amp motor.
�042Triggerspeed control: 0-2500
rpm, 0-50,000 bpm, reversing.
�042Sidehandle can be used on either
side and with or without depth
gauge.
�042Self-stopbrush system.
5378-20 1/2" Hammer Drill
�0421/2in. capacity, 7.5 amp motor.
�042Triggerspeed control in two.
ranges: 0-1350 rpm, 0-22,000
bpm, 0-2500 rpm, 0-40,000 bpm,
reversing.
�042Hammerwith rotation or rotation
only.
�042Self-stopbrush system.
4:A :K:• -.-. �036#7/,7..:..... .:.. : '.... ... a",4 .I-
.,4.Z.
.,::195.L..
JobsitetSupply Co. -'-4
(619) 29536100 Phone
(619)-295:*300 Fax. ....I-.. .. I /1,
ROTARY HAMMERS
•& - I-
./CL
.A
Jobsite Supply
5383-21 3/4" SD
�0423/4in. solid bit capa
core bit capacity.
�042Variablespeed: 0-12
5400 bpm, reversing
�042Powerful6.0 amp m
power for a hard-hitt
of energy per blow.
�042Twomodes of opera
with hammering and
this versatile tool caq
drilling in steel, wood
Use rotation-only for
and wood with option
adapter. Use rotation
hammering when dri
S Hammer
city, 1 -3/4 in.
70 rpm, 0-
' otor provides
ing 1.7 ft.-lbs.
tion: rotation
•rotation only -
be used for
or concrete.
•drilling in steel
al chuck and
with
ling in concrete.
5368-21 7/8" SDS Hammer
�0427/8in. solid bit capacity, 2 in.
core bit capacity.�042Variablespeed: 0-1 • 00 rpm, 0-
5000 bpm, reversing.
�042Powerful7.2 amp motor provides
power for a hard-hitting 1.8 ft.-lbs.of energy per blow. •
�042Twomodes of operation: rotation
with hammering and rotation only -
this versatile tool can be used for
drilling in steel, wood or concrete.
Use rotation-only for drilling in
steel and wood with optional chuck
and adapter. Use rotation with
hammering when drilling in
concrete.
5359-21 1-1/8" SDS Hammer
�042Grounded,3-wire cord.
�0421-1/8in. solid bit capacity, 3-1/2
in. thin wall core bit capacity in
concrete or 4 in. capacity in
masonry block.
�042Variablespeed: 0-980 rpm, 0-4,200 bpm. •
�042Powerful7.4 amp tpotor provides
power for a hard-hitting 2.5 ft.-lbs.of energy per blow. •
�042Threemodes of operation: rota-
tion with hammering• hammer-only
and rotation-only. Th|s versatile tool
can be used for drilli•g in steel,
wood or concrete. U•e rotation-only
for drilling in steel aAd wood with
optional chuck and •dapter. Use
rotation with hamm•ring when
drilling in concrete. Ose hammer-
only for light chipping work.
142
C...
.......... ?0:..... ./£....
9-021
�036--'Il....�036i-...../-'. .....---Il./.... .......�036=t.I 1-«= '. ......=.'
•Ii #Li-•••69-%691$jkkAS••p•bo•i. · '·3'. I ....3,'.•-2....·-'»):295,diod.Fak- *"'ili ...i.·I z:,i•.. Le.'70'..:
4, 94". 9,2I V#6%6,-LF/.�036�0361..-8/'.-.--..1.-..:•e:••••1_,1.-
ROTARY HAMMERS
Jobsite Supply
-....4:• :fid...- Milwaukee r
4 . '
CHIPPING & DEMO HAMMERS
5336-22 13lb. Chipping Hammer
�042PatentedVibration Isolation
System (both grips).
�042Acceptsround/hex shank access.
�042Dialspeed control: 1300-3450 bpm
�042Powerful13.0 amp motor with
Electronic Feedback Control Circuit.
�042Includes12" bull point, 1" x 12"
flat chisel, 3" x 12" scaling chisel.
'' h'1'.. ... 6. . ..,.. ti-9=1
'... ..'
'.. I •:•.1-a-:�042· ' N... f.'... '..
--'Z2 5314-21 1-1/2" SDS Max Obik•-*•01.*:271;2 46 i,id 5318-21 1-1/2" Spline -..e, i._*·f.1.•a,I-•'91'•#11 & mIl/YS/,fijiUM#+m �042Singlemotion bit insertion. 177/1• �042Stoprotation mode for chipping
• and self drilling anchors.
Ill< �0421-1/2in. solid bit capacity, 6 in.
thin wall core bit capacity.
�042385rpm, 3,400 bpm.
�042Powerful11.0 amp motor with
Electronic FeeBback Control Circuit..
�042Extralarge steel case holds 23
inch long bits.5337-21 3/4" Hex Demolition
5339-21 SDS-Max Demolition
5340-21 2" Spline Rotary
5342-21 SDS-Max Rotary
5315-21 1-1/2" SDS Max �04219.9ft./lb. blow energy.
'• 5321-21 1-1/2" Spline �042Vibration-reducingmaterials with
, "1.'. floating-action switch handle.-I............•,31.'•i./.--• .Patented Vibration Isolation
•illlillmig System (both grips).
-�042Singlemotion bit insertion and
1 positionable chisel lock.
�0421-1/2in. bit capacity, 6 in. thin
wall core bit capacity.
�042Dialspeed control: 190-385 rpm, 5335 31lb. Demo Hammer1700-3400 bpm.
�042Powerful11.0 amp motor with�042Frontand back handle has
vibration isolation.Electronic Feedback Control Circuit.
�04218.5fL/lb. of blow energy,'.,e. 1600 bpm.
�04213amp1'=�042Usesstandard 3/4 in. hex
hammer iron.
--1
-'.445345-21 1-3/4" SDS Max
-•1779 5346-21 1-3M" Spline7.il'Lawl, Wpil F.. i
••:•-,1)111 .Patented Vibration Isolationwli'-• El# 1• ..System (both grips).
5338 71 lb. Demo Hammert31• �042Singlemotion bit insertion and3-" positionable chisel lock.
�0421-3/4in. bit capacity, 6 in. thin 9. �042T-handlesfeatured for operator
control.
wall core bit capacity. �04244ft./lb. of blow energy, 1400
bpm.�042Dialspeed control: 190-385 rpm,
1700-3400 bpm. �04215amp, 120 Volt AC/DC .
�042Uses1 -1/8 in. hex air tool steel or�042Powerful13.0 amp motor with
Electronic Feedback Control Circuit. t 1-1/8 in. hex notched steel.
,. '".. -1
143
K..-• ' *£ . ••• '.' --'•* =•-&*.- •....-= •& I.««"' '• .. I...•»»«»•.•»»...»-ti.••«.• ·.t•t,••«-·_ tt.« ,- i•»«,i,•,t,-,t--..##.,t�036»,», ,**
'i, , P . . .
r :.4... ..:,
.Al
.J
4090 375/750 RPM
4094 450/900 RPM
4092-20 375/750 RPM
4096 450/900 RPM
Jobsite Supply Co. 'r ,
(619) 295-6100 Phone Z
(619) 295-6300 Fax :1 :I ::
I. C .it :
.-- I ..i.. ..
Ilill' 1 1I. . Fl-•
/ ' / -.':....::i:R " f.<\ 4".• -/.*- r,:
DIAMOND CORING
�042Fordiamond coring in reinforced
concrete, tile, masonry or natural
stone.
�042Dualtorque/speed ranges.
�042Allball and roller bearings.
�042Tripplereduction gearing on all
models.
�042Built-Inwater swivel on all
models.
�042Cordequipped with 20.0 amp
twist lock plug; NEMA plug type
L5-202
Specifications
Catalog Number Bit Capacity AMPS
4090
6092-20 -- -4094'4096 ' -' -----,- .......
..
I'l..,i_li
EFL.'M•, ,. togt
& 3,19r .iwlei-T•.'••I•
r it
2-1/2" - 8"._2-1/2'-r_8"_.
2" - 10""- '"' '2"--:fo'r
APL
L.
15
-.15--20
'- 20-"
Motor Protection
Shear Pin.QuEicT -i--.-3
Shear PinCIO-tdh--- -1
4115 Contractor Series
�042Castaluminum base with four
leveling screws for fast accurate
leveling adjustment
�042Durableprecision-ground 2-1/2
in. steel column, 43-1/2 in. high.
�042Rearmounted rack and pinion
feed.
�042Jackscrewfor ceiling and
backwall bracing.
ID, qillillill 0
lf!'., ..4-r 1,-·. :
4./ -*#.7<--3-I- - - - --Iril-*....•
4115-22 Contract
Series
�042Comeswith 4096 Di
Motor.
�042Castaluminum base
leveling screws for fa
leveling adjustment
�042Durableprecision-gr
in. steel column, 43-1
�042Rearmounted rack a
feed.
4136 Professiona
�042Castaluminum base
leveling screws for fa
leveling adjustment.
�042Adjustable,tilting 2-
1/2 in. steel column.
�042Fourspeed wheel fe
�042Motormount cradle
jackscrew.
or Plus
amond Coring
with four
st accurate
ound 2-1/2
/2 in. high.
nd pinion
1 Vacuum Rig
with four
st accurate
1/2 in. x 43-
ed control
bubble level,
4 - 1-1'S ...99*b...t.t: . .'::r ....i..
. '. .: .'
b
.=.
-1,
-1-
..
eD e:5*-:
ti
i,-t;./e
e
i_* 1i
<./.
<:..
t...,---=.---».........---'--'-,-I....-•....*till-....-I-'--..--'.
144 Jobsite Supply
=»»==�036�036=.-�036�036====�036=======�036�036=«===««==�036,==«»'»,='«,'====»»«=»=i=�0361'.
Al.. 'St .te,.....: -I..... ..�036- i . %. 0.,Ill l,At•Job#ite?Supp/y Co. ,.�036.Lf �036..•·.·/4.e.:-i- 3,-. 3
*'•«(619)295*JOO Phoile' ·' ,'115• · 5 12:'- .5.:69: ..-·, t.....• -4 .... ...3.(6•19).89526300. Fax .:::3«.:.:•. · i... ·,...47.Ffe .•.:-Sa·'< :
': .44... ..... ...,-1"/ · 's. ·..,·'•A:<·,/· :: ,: -'it ...,,. ..i<'s 3,-46121:Z;jfph,•·-.1./....3*.,
- · I ' ... i.z•,2.21
1.1....'... '..
1•Soc.'..
SAWZALLS/BAND SAWS/CIRCULAR SAWS
••• 6509-22 Sawzall
*•a•ail:I•IL 11 1-c-4
P*
i F
*M
�0420-2800SPM Variable Speed
Trigger.
�042Quik-LokBlade Clamp for fast,
easy blade changes.
�042DoubleBearing Wobble Plate
Mechanism for less vibration.
�042CenterPivot Adjustcitile Shoe.
�042HeavyDuty 'S' jacket 8' two wire
rubber cord.
6519-22 Sawzall Plus
�042Powerful10 amp Milwaukee-built
motor.
�042VariableSpeed Trigger: 0-2800
strokes per min.
�042Heavy-DutySteel Quik-Lok Blade
Clamp System for easy blade
changes.
�042KeylessAdjustable Shoe.
6524-21 SAWZALL -
THE HATCHET®
�0426-position pivoting handle-Built for
tight spaces. Fits between 16" on
center studs.
�0423/4" stroke length with orbital
action or straight reciprocating
action.�042Heavy-duty steel Quik-LokTM blade
clamp.
�042Counter balanced mechanism for
smooth operation.
�042Trigger speed control, 0-3000 spm.
�042Impact resistant carrying case with
on board blade storage.
6523-21 Rotatable Orbital
Super Sawzall.
�04213Amp motor.
�0421-1/4"Stroke.
�042Variablespeed trigger, 0-3000 spm.
�042Gearprotecting dutch-lengthens the
life of the tool.
�042Quik-LokCord.
6536-21 Orbital Super
Sawzall
�04213Amp motor.
�0421-1/4"stroke.
�042Variablespeed trigger, 0-3000 spm.
1,F•0.- ' ... -, -=-...9$4*.
�036..i-/•.Iri+*.
Ing .... ..44
, iMilwaukee'•«
6223 Regular Cut
�042Cutsup to 4-3/4 inch x 4-3/4 inch
rectangular stock and 4-3/4 inch
round stock.·�0426amp, AConly:
�042Triggerspeed toiltrol: 0-350 sfpm.
�042Usesstandard.44-7/8 inch x 1/2
inch x .020 inch b•nd saw blades.
6232-6 Deep Cut
�042Bladeis mounted on the left for
superior visibility to the cut line.
�0423.25max. horseijower exceeds
worm drive saws with 35% less
weight.
�042Full50 degree bevel capacity.
�042Exclusivetilt-lok main handle
adjusts to the work for most
comfortable work position.
�042Withcase.
6391-21 7-1/4" Circular Saw
�042Bladeis mounted on the left for
superior visibility to the cut line.
�0423.25max. horsepower exceeds
worm drive saws with 35% less
weight
�042Full50 degree bevel capacity.
�042Exclusivetilt-lok main handle
adjusts to the work for most com-
fortable work position.
�042Withcase.
6460 10-1/4" Circular Saw
':...« �04215amp motor: AC-DC.
'44fs: -*3 .3-13/16 inch maximum depth at�0425200rpm.
-b- .. 4. 5 1-, . -121 90 degrees.
'«». �042Highcapacity: cuts 4X4's.
�042Withcase.
Jobsite Supply
6- -...':V
:.'.
7r -,
t: 01. ,
S=i..1*.
V
145
'=- "�442./ .A '. I I . . " - -», »Il. -'. . « I.,it -· ...1 ,»»»«»»»--.lilI-Il-- 't-. t it'•••». ..-,-Il •--I«-Il-..1-
.f: I . '.5 ..:.
..: : ...�036
rh .. ... .:i•,2..•. 3• 4#t. . ..'.- .:4 , 1,·/·,2 '.... r :·...........-4,--- ---Ak-i.. ...... A..R...9.-«. 4 ..
6490-6 10" Miter Saw
••-• �042Widemiter angles, 51 degrees
�042Powerful15 amp motor, 4800
RPM.
left and 59 degrees right
�042Mitertable rotates on roller
I:-1--r;F bearings.I. -- K 11711- �042Extratall fence to support large
':*252*0£ wompleces.
*FJ'/te,4."d•'i... ij
[-3 --21»".'"'.... . "ill.Lie . 8---3.*•T
..;
- . 4 r: .-2-..
B».3.,Tr•ixillillifililizij'•-.
t»f
6494-610" Compund Miter
Saw
�042Powerful15 amp motor, 4800
RPM.
�042WideMiter Angles from 51
degrees left to 59 degrees right.
�042PositiveStops at 0, 15, 22.5, 30
and 45 degrees left and right.
�042BevelsAngles from 50 degrees
left and 3 degrees right with non-
slip locking system.
6497-6 10" Slide Compound
Miter Saw
�042Heavy-Duty15.0 Amp Motor.
�042Wideangle capacity for maximum
productivity.
�042PositiveDetents for quick,
accurate cut
48-08-0450 Miter Saw Stand
�042Portablework center.
�042Tubularsteel rail table legs.
�042Fold-up,self locking legs.
�042Adjustablework supports.
�042Universalbench top tool mounting
clamps.
�042Durable16 Ga. Steel Construction,
holds up to 500 lbs.
SAWS
. - : ••\ Jobsite Supply Co. - : +
•• (619)'295-6100 Phone .1/ 1 . ..
-3 ...'/'fty (619) 295,6300 Fax
6480-20 15.OAMP
8" Panal Saw
9=/824'/11"3I /'....... -'31 .1 ,i 1 :· �042-4/4'1/1 ·,' 1 1 C 1.·m Bi t
: rt...14-4
-I:.., i / 2 ; .: '· t:= F..9:,it :1 h ' : i. /n. 9- '- "11 1
·, ·· -9 -.... i 7 2--5 1 -··· -%
FF•F Qi' ilipi......
-- »....:»1.Ill' •Ult'T'f--311 ; 10=:
C=*-1- 1/ /N//1==u=G
CT:*9••,•ibi:,/45,"Abp•ril'i
4*ir-
�042Powerful15.0 amp
bulit motor.
�042Heavy-dutyall ball
bearing power unit.
�042Powerunit can befrom crosscutting to •
�042Smoothacting rolle
allows heavy materie
through machine.
6266-22 Jig Saw
�042Powerful6.2 amp
�042Orbitalaction with
levels for faster cutt
�0427setting dial spee
500-3000 SPM.
�042Quik-lokblade cha
�042Keyless458 bevel
�04210position dust b
built-in dust collecti
attachment to vacu
metal gear case.
�042Lowposition roller
stability and precisi
�042Counterbalanced
vibration.
Milwaukee
nd roller
asily changed
npping.* mechanism
1 to gently roll
otor.
adjustment
g.
control
ge system.
djustment.
wer and
n port for easy
shoe and all
uide for blade
1 Cuts.
r reduced
.......................»e )--#*0-4Ikisi:*:,i,•d�036t•,ih�036•te-•*-p»s*,4-t=*�036•,r'W�036»I-/---41•,el...t•.........t•k»•*.t, i'*A'.1
146 Jobsite Supply
a
e
m
4
in
d
n
2
IC
0
um
g
0
fo
21.34
*'. * ..'.r. 2 . .Ag ...... ...i'•
. .4.. -.
,,
4.Ir=* -dir
V
9* -r1
....
.sh.:.1.•..74*Eai••BER#Co,•1 «,.11.5.:+•12•2'•*:<*•+* •3'" •<" • ••'-" • --: *•,Pli•»jgk«S¢i.O*,Phonel.·'•t,*,•�036«••''-3•5 I•,':1,•'••(f .•• '.I,:...2.'.1 3)3:1.:(61'9).295#6300.Fii --" ·9:'·t·R ,·i . •4:·31'-..j.,1.3'i- '» - i.i,,*:,4%:i''t':·
,•52 ••3«8•i•,f•ffil,2_i,i:,i-..1...1-j·36..%,•012,-'-..31- •9.522.- - C 4 :
SPECIALTY TOOLS
..,..�036�036i...4-6017-6 1/4" Sheet Sander
•• - �042Uses1/4 sheet of 9 in. x 11 in.
•""k -,A paper.' · j¤P*- �042Fastsandpaper change with lever
•.4 type clamps.-.5./, �0421.8amp, 13,000 orbits perP'•te,if minute, for fast removal finish
sanding.•4<:00.-�042Rockertype on/off switch.
�042Long8 ft. 2-wire rubber cord for
operator convenience.
6018-6 5" Random Orbit.••...•... Sander-/..L,...7..1 �04212,000Orbits per Minute.••«�042Standard5 in. diameter sanding
discs with 8 holes that accept PSA
sandpaper.
�042Engineeredto reduce vibration.
�042Rockertype switch with on/off
guard.
£
6010-6 1/2" Sheet Sander
�042Uses1/2 sheet of 9 in. x 11 in.
sandpaper.
�0425amp, 12,000 orbits per minute
for fast material removal.
�042PrecisionEngineered for low
vibration.
�042Builtfor continuous production
use. Ample reserve power for
heavy sanding.
5615-21 1-1/3" HP Router
�042ExclusiveBodyGrip® Design
�0421-3/4Max HP, 11 Amp, 24,000
lili-•../.I RPM Milwaukee Motor.
�042ExclusiveUnear Depth
•·SilAdjustment System.-77'.:'will , ·ifilt•jililli•l.ill'll.Il �042Impact-resistantcarrying case
' ••"•Sr-- with integral Routettation�442.LIllI .:.. t./.--
0•R0 1 .1#hd •- 1... -1.:" .1. -M:=:bl
,
•- I-
=Jobsite Supply
sMilwaukee'..
5625-20 3-1/2" HP Router
�04215.0Amp, 3-1/2 Maximum
horsepower Milwaukee Motor.
�04236-speedelectronic variable
speed (10,000-22,000 RPM).
�042Electronicfeedback cicuitry
maintains speed and power under
load.
�042Largetactile grip side handles
for comfort and control.
8975 570°F/1000°
�042Dualtemperature 570 and 1000
degrees F, 11.6 amp motor.
�042Uniqueimpact resistant heating
element.
�042Efficientsoft air velocity increases
surface temperature much faster.
than conventional hot air heat guns
�042Threeposition rocker switch - off,
high and low.
8977-20 140°F-1040°F
�042Variabletemperature 140 to 1040
degrees F, 11.6 amp motor.
�042Uniqueimpact resistant heating
element
�042Efficientsoft air velocity increases
surface temperature much faster.
than conventional hot air heat guns
�042Rotaterear housing to select tem-
perature.
8988-20 90°F-1050° Digital
�042Ceramicencapsulated heating
element for maximum tool life.
�042LEDDigital Readout Display
shows present temperature in
increments of 10° F.
�042Onehand operation with light-
weight and easy grip handle.
�042Uprightstationary use with pads
on back cap and lower handle.
�042Removableair filter keeps
debris out.
147
-"
6.z···'.. 3 ZE . .1.-.,'.
4
A..4'......,=, ./.
�036=.--I'll-�036,�036�036�036='=�036=,=,�036.-
.. -�042--IT .:, ·I ... ./
....../,1...... RE. .7
.-2 . :-'·.· ·b.r:Ifi ,
3 -- Milwaukee,,.ry.- ....' 2.- -,/:' ....4 '1,0: ·· . �042Fik. 4, · · ·,-9#,.--I.---------,.... .... .- '.'-4 +'.----
MAGNETIC DRILL PRESS
4270-21 Compact Press
�042Ughtweight.
�042Powerful1.1 max HP - 9.0 Amp.
�042Accepts3/4" diameter shank
annular cutters.
�042worldclass cutting capacity.
�042Foeuse on any flat ferrous
material 3/8" and thicker.
4204-21 Mag Drill Press
�0421/2"capacity.
�042600RPM.
�042Basecontrol panel includes
-4 variable speed adjusting for motor.
' �042LineLok-Out prevents tool from
operating should voltage be
restored to an interupted line when
: switch is locked in the =on".I. position.
�042Automaticbase/chip de-mag.
�042Foruse on any flat ferrous
material 1/2" and thicker.
-«
4206-21 Mag Drill Press
�0423/4inch capacity, 12.5 amp
motor, 350 RPM.
�042Solidstate electronic switching.
�042Feedbackspeed control.
�042UneLock-Out prevents tool from
operating should voltage be
restored to an interrupted line.
·'. . :• Jobsite Supply Co.
.,24'... ,:·. .,. .. '1•d=:::l (619)'295-6100 Phone
r "- . i. . ':4 f..\1:.92 .6(619) 295,6300 Fax-*. .... . .....r...
.•f
CUT-OFF SAWS
./9*\./ L, :
likim,49 A \-I'IIi \1"0:"Irl1-Ji.WY./.b./2
..... ' 4•W --%.-... .../.••
..6
fim-1:. •r"ci•i'\
2 /
6176-20 14" Cho
�04215amp, 2400 watts/
maximum horsepowE
power output. ·
�0423900RPM, 5 inch p
capacity.
�042Heavy-dutycast iron
�042Spindlelock for con
changing of abrasive
p Saw
3.2
r
ipe cutting
base.
venient
wheels.
6180-20 14" Abrasive
Cut-Off Machine
�042Powerful5.4 Max H.R,15 amp motor. •
�042CompletelyTool-Free.�042Exclusive Quick Change Tool-Free
Abrasive Wheel Systdm.
�042Tool-Free3 Position,
Heavy-Duty Fence.
�042QuickRelease Lockfng Vise.
�042QuickAdjustable Vise.
�042Heavy*gutyCast Aluminum Base.
�042HorizontalD-Handle.
�0423,900rpm.
�042IncludesOne 14" Abrasive
Cut-Off Wheel.
6190-20 14" Dry
Cut-Off Machine
�042Powerful15 AMP AC
�042Providesa Burr-Free
Virtually No Sparks.
�0421,500rpm.
�042Heavy-DutyCast Alu
�042Tool-Free3-Position
Heavy-Duty Fence.
�042QuickRelease Lock
�042QuickAdjustable Vis
�042HorizontalD-Handli
�042IncludesOne 72 Too
Carbide-Tipped Blade
/DC Motor.
Cut with
minum Base.
ng Vise.
e.
th 14"
... 1, ,
--f'l.Fl
.•. /0.
/*IP
. 46
,-p..•/M .
f
.*.
221
51£9
4
6.--_ .-..1, /tz'
---'t'=t,«»»t»»»»»=»»=»,«»=i=»='="«,�036===»»1»==S,�036="=«S«===,==»»'.«==-----*==»====I-*=t«»t»=»====«==»=====»=««==»•=»=»=.•=it%-.--«9-
148 Jobsite Supply
I,1.¥Jobsite•Suppi' Col .:I. 5f.'••6'(digit*5)6100 Phone . 75,1' • • ..
t. ...#3'.9..' · ...Wi•9)(*46908:F@i ... f......ft.3.1.· -1.:-. -1-•T..••..flik•.'.,Egfl....---•ff... ·2' Li ...-'-: .
'A--*dil.-I...11....p-
F 7:4/v
6#i
/1.
6101-6 Band File
�0425.5amp, 2,300 SFPM, AC only.
�0421/2inch x 18 inch Contact Arm.
�042180degree adjustable head.
�0423position side handle.
6148-6 4-1/2" Grinder
·· 2,'·.,t- ... r-.4
.:I·...15:2(... 1
..U:.7.1 ::».6'·'. • -,
GRINDERS
�0428.5amp, 10,000 RPM, AC-DC.
�042Spiralbevel gearing for
performance and durability.
�042Allball and roller bearing
construction.
�042Tool-freeadjustable wheel guard.
6154-20 4-1/2" Grinder
6156-20 5" Grinder
�042ProductFeatures.
�042Powerful12 amp, 2.1 maximum
horsepower motor, AC only.
�042Dialspeed control 4,000-11,000
RPM.
�042Electronicfeedback with soft start
�04210ft., 2-wire Quik-Lok cord set.
6078 7/9" Sander
�0422.25maximum horsepower, 13
amp motor.
�0427inch or 9 inch capacity, AC only.
�042Dialspeed control 0-6000 RPM.
�04210ft., 2-wire Quik-Lok cord set.
.... E-i.A. 4,--·-·1;5·,·t ·
2- •will&7"1----..
*Pmt:I,1
\
'di•lmililillillill'li•Zill,
eMilwaukee..
6088-20 7" Grinder
�042Powerful4.0 maximum horse-
power, 15 amp motor.
�0427inch or 9 inch capacity, 6000
RPM, 120 volts AC-DC.
�042Doubleinsulated with 2-wire fixed
cord.
�042Two-fingerlock-on switch
�042Angledhandles for more natural
hand positions.
�042Grindermay be converted to
sander by using the proper backing
pad assembly.
6089-20 9" Grinder
�0429position Roto-Lok grip.
�042Powerful4.0 maximum horse-
power, 15 amp motor.
�0427inch or 9 inch capacity, 6000
RPM, 120 volts AC-DC.
�042Doubleinsulated with 2-wire
quik-lok cord.
�042Two-fingerlock-on switch.
�042Angledhandles for more natural
hand positions.
�042Grindermay be converted to
sander by using the proper backing
pad assembly.
5192 Die Grinder
�042For mounted wheels and points
up to 1 -5/8", reinforced wheels
up to 2".�0424.5 amps. 21,000 rpm.
�042Armature dynamically balanced
for smooth, efficient operation.�042Self-stopping long life brush
system.�042All ball and roller bearings.
�042Double insulated.
�042On-Off toggle switch.
5223 5" Straight Grinder
�0427000rpm,-12 amp.
�0425in. diameter wheel.
�042Coatedspindle housing for cool
gripping surface.
�042Hardenedhelical-cut alloy steel
gears and shaft.
,%.Of......:. ...: '. •7 -..
�036
....
-.
..;.. '.$5
4 (-,1,12'1 8'ill1.,Z. •j r
--::-,-I --.---I'll--•'I.-«--Il-
Jobsite Supply 149
62 - » ': 7;-, ..·.; . .1: 7.9•3:·' . ··:,....... + .... I ... 57:...
..i. : , .e:I- .: ....I:....-,·:·"6%'•1•w.•..s., '
S. - 4 Milwailkee.•.'tt ft·. ' ..1•:.,t : -.. ·...ti..3,6:...1.2 ...... -, .. .·
150
l: ...,
i&#p .. .. . 56.-: r.- 4 '.. S. I..... ..:
..... . 5: ....:...:T .7it ...i. ...
1 £6 - _ ir · ..,I. I. �442-/-.. --- . ./---/-- :· .i
SHEARS/NIBBLERS
R'r•777-- 7
<r
f.'lillillair Alf, ..J
r.p
6850 18 Guage Shear
�0424amps, trigger speed control:
0-2,500 rpm spindle speed.
�042360degree swivel head.
�042Cutsup to 15 ft. per minute.
�042Cutsround holes, square holes
and irregular shapes.
6805 16 Guage Shear
6815 14 Guage Shear
�0424amps, 4,000 SPM.
�042Clearunobstructed visibility.
�042Cutsclose curves either left or
right.
�042Bladedesign eliminates jamming.
6890 16 Guage Nibbler
�0423.8amp, 1,900 spm.
�042Cutsup to 7 ft. per minute.
�0420.87in. starting hole required.
�042AC-DCpaddle switch.
6880 10 Guage Nibbler
�0423.8amp, 1,900 spm.
�042Cutsup to 7 fL per minute.
�0420.87in. starting hole required.
�042AC-DCpaddle switch.
• , 74 , sAIFT) Jobsite,Supply Co. i':
: '· .. : ·· 1==51 (619).29526100 Phone -.. ,
".1,:-ii..,s�036,t,Iff" "(6191 29560300 Fax " • B.--5....':. , ..
'314. 6..--
.*.1450*458396129591
-0A
1 , 55 gaL •f DRUM •
..,*limilliilli/&''.FNF
-'
Jobsite Supply
VACUUMS
8955 10 Gallon S
�042Wet/drypickup cap
�042Positivewater shut
Protects motor from
sure to water.
�042Heavy-dutyfilter sy
For the roughest coa
the finest dust.
�042Useas blower
Switchhose from inta
for cleaning inaccess
op Vac
ibilities.
ff
irect expo-
tem
e material to
ke to exhaust,
able areas.
8912 11 Gallon Shop Vac
�04211gal., 1-1/2 bu. recovery
capacity, 9.2 amp m6tor.
�042ForWet or Dry pick-up with
Positive water shut-off.
�042Heavy-dutyfilter sy•tem.
�042Three-stagebypass motor for
wel/dry operation.
8945 Motor Head Only
99.2 amp three-stage motor head.
�042Adaptsto a1116 inch diameter, 11
gallon units and larg•r.
�042Max.air flow is 92 cu. ft./min.
with sealed suction water lift of130 inches. •
�042Sameas furnished with 8912,
8925 and 8926.
49-90-1100 Dolly
�042Fitsyour 55 gallon drum. Gasket
secures tightly to dru• when vacuum
is in operation. Adapt•ble to Motor
Head no. 8945 and tqose on Nos.
8911, 8912, 8925, 8926, 8927 and
previous model 8916. Use 16'
diameter accessories. Net weight
10.0 lbs, shipping wdight 11.0 lbs.
49-90-1590 Drum Adapter
�042For55 gallon drum. Sturdy steel
construction with 4 wheels and a long
hinged handle. Drum•easily tips off or
on. Net weight 43.0 lbs., shippingweight 45.0 lbs. •
h
0
1
3
S
XX4
48
'4
*
.. i.. li»Jobsit�254ssupplyCo. .,/:* .-/.:-/,2.··'..6,. '
:,�042'•5.'(61 9)'298•100 Phtihd.. .•.'-·'.• • - E- . f.
i · i.\.91 5.(619) ·295-6300 Fax 'v-':.-f.,1 '1. : ...1;.a'v -
i . . .r,-91131)•. B652.E.k..11.i,•·.'•.-L_.L._.t'.- 1.L••.1.-1-
15:irY"Mil£i•:ell:m:mmi0*9
Included Accessories:
�0426'x2-1/2" Heavy-Duty Hose.
�0422- 2-1/2" Extension Wands.
�0428"Utility Nozzle.
�04214"Floor Nozzle with Squeegee.
�042CreviceTool.
�042HighQuality Cartridge Filter.
�042DrywallFilter Bag.
=<00/#ff ' -di9 Ql•-.•
.&45-••••vi•
Shop Vac Kits
.:,AE..4... .- .7.....
,: 1 • . s,Shbii Vac.&,Milwaukee. ... 0,-1.%9: ...3. .,
,·...._6181./
VACUUM CLEANER ACCESSORIES
49-90-1670 Wet and Dry
Cleaning Kit
�042Acomplete kit of accessories for the
maintenance department, Kit consits of
1 of each.of the following:
49-90-0060 10' Hose
49-90-0550 Major floor tool ,
49-90-0580 Squeegee Shoe
49-90-0400 15" crevice tool
49-90-0600 14" carpet insert
49-90-0740 Utility Nozzle
49-90-1000 Double Bend Floor Wand
. 1....-,I.•1•4. Wireless Vinyl Hose• '.j.j: :•-fL••2•.
/--·.ai••:•As �042Crushproofmulti-flex hose with
>* : ..253,=.1•'\ nowire reinforcement.1-1/2"I.D.7-,�036'.-/.... .,-t•.6.::t.-.."79:,7....1.: 1 with twomolded cuff ends.
X.• �042Orderswivel-end connector or
r -dE. ......i-: 7 • hose adapter seperately..6..• •- 49-90-0060 10' Hose
49-90-0070 25' Hose
49-90-0090 7' Hose
49-90-1810 Vacuum
Accessory Kit
�042Accesoriesfor general cleanup
applications. Kit consits of 1 of
each of the following:
49-90-1865 Wand
49-90-1770 Crevice Tool
49-90-1775 6" Nozzle
49-90-1845 14" Squeegee Shoe
49-90-1850 14" Rug Shoe
49-90-1840 Master Nozzle
49-90-1860 3" Round Brush
49-90-1855 14" Brush Insert
, 49-90-1000 Double Bend
4==0 -I' Floor Wand
=. « ...... ...
Jobsite Supply
�042Built-inswivel connection adapts
with compression fitting to the
major floor tool 49-90-0550.
�042Wandconnects t6 1-1/2" I.D. hose.
�042Madeof chrome-plated steel.
/6
•1•111,.S.2
LLL.74
·, (i'*-IR.--1
151
Model # 9254010 9254210 9254410
10 Gallons 16 Gallons 22 Gallons
CAPACITY (tough polly tank) Oough polly tank) (tough polly tank)
PEAK HP 3.0 5.0 6.5
SP (inches of water) 55" 52" 61"
CFM 130 170 175
VOLTS 120 120 120
HERTZ 60 60 60
AMPS 7.25 9.0 10.1
CARTON SIZE 16-1/8" X 16-1/8" X 28" 18-1/4" X 18-1/4" X 28-1/8" 18-3/4" X 18-3/4" X 33-1/2"
CUBE SIZE 4.2 5.5 6.9
SHIP WEIGHT 22 lbs. 27 lbs. 31 lbs.
UPC 0 26282 92540 4 0 26282 92542 8 0 26282 92544 2
CORD LENGTH 18' 18' 18'
FllIERS Cartridge plus Cartridge plus Cartridge plus
Drywall Filter bag Drywall Filter bag Drywall Filter bag
F. , ...".1.. 1.. ....... I ......... "t»«.«......,�036.'»..."1,« ..'...t.='t. ..», ..... 'S, : ..'., ..t..«.... ..'. t. (.. .• -..74,»27;6
'i·t· ..3.,1 ''·iR.•10..f *f.3.�0365 : 1...1 :i.t' .;. 14#•96·#1,9 ' 1,42 *f••• t•h 'Jdbsita Sitpbly Co, ' 1 -. ' .... :.9.. : . :1;Ii'.9.34...Ei•AiG : ·.-1/,... :1 -AY· :tc': : •.-· ..=··· •1• (619)'29-5-6,190 Phone•' . v ..
...13 :. VaCU#mt##hn*r.b•ccesi•bries •»42:f ' 2.-:-- .J. t .'.'*F'-4'- ·(619) 295-6300 Fax 6,..·' '30.: .1 ·-·' :568: ·'t:. ·2,9:.'· ·., :' 12 '-·pi.' . :Li ..;.:'.1 '••f* .. T. 4.-: =lk.•... .. .... ...0- , . " f.· L;-:,............ :4.·.·,•4•,/-,·...:r"84-_,-__, �036/---'-b'•4 ..,•._---0:-El-- -,-.*./,-24.-Ali-.............. . ·"L .. '/*.«'h ·'· ·. ·,. I
»
•S
qkr: -·
.I••iC.11 GOE/*/
. 1 .-90/
4:1-•3
al,ix/'llilillilimb
----4...te
...........Ill".
t.re=-=-IU
i/am.....ilib
6
-L
MAJOR FLOOR TOOL49-90-0550 Major floor tool with two "quick tum"
thumb Sclews for quick tool changing.Accommodates interchangeable 14"inserts and replacements. Suppliedwith No. 49-90-0610 bumper.Attaches to 49-90-1000 wand.
14" REPLACEMENT BUMPER49-90-0610 Attaches to major floor tool 49-90-
W BRUSH INSERT49-90-0560 For rough floors. large wall and ceiling
areaLAttaches to mNor floor tool 49-90-0550.
49-90-0630 14" replacement brush strips (2)
14�042SQUEEGEEINSERT49-90-0580 For fast drying of washed floors.
Attaches to major floor tool 49-90-0550.
49-*0640 Replacement squeegee blades0)·
14'CARPET INSERT4990-0600 Bottom plate perfectly designed for
cleaning rugs. carpeting. Attaches tomalor floor tool 49-90-0550.
14'FABRICATTACHMENTSHOE49-90-0570 Suited for cleaning cement and con-
crete floors. Attaches to major floortool 49-90-0550.
49-90-0620 14' replacement fabric strips (2).
14' FELT ATTACHMENT SHOE49-90-0590 For walls and smooth hard floors such
as tile, hardwood Attaches to majorfloor tool 49-90-0550.
10• NYLON BRISTLE BRUSH49-90-0760 Heavy•duty cast aluminum, wide
mouth nozzle.10' cleaning patti.Compression type. A•aches to DoubleBend Floor Wand No. 49-90-1000.
10' HORSE HAIR BRUSH49-90·0750 Heavy-duty cast aluminum, wide
mouth nozzle. 10' cleaning path.Compressiontype. Attachesto DoubleBend Floor Wand No. 49-90-1000.
12'WIDE MOUTH GULPER49-90-0540 Ideal foruseon bare floors or rugs.
12' cleaning path. Compression type.Attaches to Double Bend Roor WandNo. 49-90-1000.
WIRE FRAME FILTER CAGE, CLOTH FILTER AND GASKETASSEMBLYAvailable for both 14' and 16' dia. tanks. The filter assemblyacts as a final filterforair leaving tank.
TUB STYLE FILTERS AND WIRE FRAMES
49-90-0290 Wire Filter Cage 14" Dia. Fits: 8935 orlyt,i,e• 49-90-0270 Wire Filtercage 16" Dia. 'il' Fits: 8911•912, 8925, 8945
49-90-0280 Cloth Filter and Gasket 14• Dia•..1 Fits: 8935 and 8965./.-
49-90-0260 Cloth Filterand Gasket 16' Dia.Fits: 8911.8912. 8925.8945
SAUCER STYLE FILTER AND FRAME
49-900265 Cloth filter and gasket 16' dia.
49-90·0275 Wire frame filter cage 16' dia
•,I,#-I�036-1Above Filter and Wire Frame Fits: 8911,8912,8925,8926,8927 and 8945.
9
.-t../.. \
\/5
./.<»'.
B*/I."p
&'#.'.1-/.
/ .c-- 4 3X
C-F..t•.
.
».,.
Jobsite Supply
WET PICK-UP CONVERSIONPANS49-90-1610 Wet Pick-Up Conversion Pan 16' Dia (Standard
on Models 8911,8912, 8925 and 8945).
49-90-1620 Wet Pick-Up Conversion Pan 14 Dia. (Standardon Model 8935).
49-90-1640 Wet Pick-Up Conversion Pan 16' Dia. (Standardon Models 8926 and 8927).
DISPOSABLE HIGH EFFICIENCY MICRO-PLY PAPER FILTER BAGSFILTERS DUST PARTICALS DOWN TO DOWN TO 0.1 MICRON -49-90-0302 5 pack. ForVacuum Cleaner Nos. 8911. 8912 and 8965.49-00-0312 5 pack ForVacuum Cleaner No. 8935J49-90-0445 5 pack High Efficiency Filter Bags For Vacuum Cleaner
Nos. 8950,8955, 8936-20 and 8938-20.
DISPOSABLEHIGH EFFICIENCY MICRO-PLY PAPER RLTERFILTERS DUST PARTCALS DOWN TO DOWN TO 0.1 MICRON49-90-0332 5 pack For 8911,8912,8925,8926, E927,8935,8945
and 8965. Ouick and easy to install on vacuum tank.Suited forvacuuming extremely fine d•stdirectly intovacuum tank Fits over cloth filter assembly.
FOAM FILTER SLEEVES49-90-0770 Motor Filter for 8950,8955,8936-20 and 8938-20.49-90-1820 For 8926,8927 and 8965.
CLOTH FILTER ASSEMBUES4990-0285 For 8950 and 8955. Use with Foam Filter Sleeve for Dry
Pick-Up.
152
DlSPOSABLE FILTER BAGS49-90-0305 3 pack. For Vacuum Cleaner No. 8934-6.
POLYESTER FILTER49-90-0286 Fits 8936-20 and 8938-20 vacuum cleaners. Bag is suit-
ed for pick-up of medium fine dust as well as coarse,sharp material.
DACRON ALTER49-90-0320 For 8911,8912,8925,8926,8927,8935, 8945 and
8965. Bag is suited for pick-up of med:um fine dust andcoarse, sharp material Fits over cloth filter assembly.
WET/DRY PICK-UP CARTRIDGE FILTER49-90-1830 For 8950,8955,8936-20 and 8938-2(. Interchangeable
with Cloth Alter Assembly and Foam Fi ter Sleeve.
1,.:,...,..' .I.. .;45
1.·»�042I•·,tt••,-.--I -.- �042.i-'.«».»».. *«ii-·:�042e5,il*ii•e••·:Al:•»=·*48.*t•=f•»*33;R-e;n95&6».,eF2- =P..l i•9i0i*;ie••*•k®10;0-*.t' I I =./--/...............
6 :3.
- -.42:53.434-" .. . .. : .:.....''. «5... ...I -:'.. ·. 44-..
....:'.:' • · '·''. ,'·.7:•.:tf;,
.../.-..2 . -•. • I-'. *·;f·· .9 611:,•i··ii. 9 3, 11;,i• .......>4'47 ·*52 9•.' .1.I.lul Jobatjaupply Co. ..,- .4. ·..: rz...:f:: · .t .2,-1 -: 0 . 4.4 :. ::
t,·Im:l=4619)'2953,1*0 Ph.6ne• · •'., 7,•,1 • , .. •t, t,-23.,"2:'.'5 ...,': .·" · •11•'.,•1••,014) *26360#Fa• ·.- · •ti•t.•••1• .••134tijti'••'•1'•.••'...f'.•.'..fil....,a•�036·-•.4.3iI�036S. fL#E*.-,1-_5tt•j'•' 1..•. ....-.2 -Lf 61...1.,1......... .)*T•,;..17, .,•.. ...
CORDLESS 14.4V
Ell/£5260/A .*., DC983KA Heavy-Duty XRP�442
flit,1/7. al"IP.1 Drill/Driver Kit
fr �0421/2"ratcheting chuck lock
-Cmprevents bits from slipping.
�042Exclusive3-speed all metal trans-
' at 0-1,800 rpm which is 29%
mission features a MAX 3rd Speed
I.4 faster than high speed.�042DEWAIIBuilt Series 4000 high
torque motor delivers 450 in-lbs of
maximum torque.
.•= .../.....VII • Ill'
4;£pl..
Ai,•-.....\
..
<• ••
i.d
DW941 K-2 Heavy-Duty
18 Gauge
Swivel Head
& Shear Kit
�042Poweredby the DEWAII 14.4V
«system" of battery packs.
�042Cuts7/32" strip which
continuously curls out of the
cutting area providing consistent
and accurate cuts.
�042Headswivels 3600 which allows
user to access tight quarters while
maintaining comfort.
DW966K-2 Heavy-Duty
3/8" 00mm)
Right Angle Drill
Driver Kit
�042Poweredby the DEWAIT 14.4V
"system" of battery packs.�0422speed ranges 0-400/0-1,250
rpm for increased user flexability
providing a wide range of
applications.
�042210in-lbs of maximum torque for
increased applications such as
turning large bits and fasteners.
CORDLESS 18V
In,milp.,----I--'.-I-'..,.·.·Cilli:/111'll'.i<-- Cl
tKilerililir.....4-7.-.. ..•./.
1///1/9,•prlill'll'llIi'.*-
/9
-'.1,/ :'.1.,-
lilifilaillillilillilillixilimli
-(2 0-.•21 '
Jobsite Supply
ta'l =
0.
18 ...31 . ..
ti 'S Dewalt .,
DC987KA Heavy-Duty XRP�442
Dril & Driver Kit
�0421/2"ratcheting chuck lock
prevents bits from slipping.
�042Exclusive3-speed all metal trans-
mission features a MAX 3rd Speed
at 0-2,000'rpm which is 38%
faster than high speed.
�042Extendedrun-time batteries
provide more work per charge and
maximum number of recharges
with NO MEMORY.
DC4KITA Heavy-Duty XRPTM
Hammerdrill
Circular Saw
Reciprocating Saw
& Floodlight Kit
�0421hour charger.
�042(2) 18V XR+ PACK�442batteries.
�042360° side handle.
�042Doubleended screwdriver bit
�04216-toothcarbide tipped circular
saw blade.
�042Circularsaw rip fence.
�042Reciprocatingsaw blade.
�042Heavy-dutykit box.
DCSKITA Heavy-Duty XRP�442
Hammerdrill
Circular Saw
Reciprocating Saw
Jig Saw, Floodlight
& Vehicle Charger kit
�0421hour charger.
�042(2) 18V XR+ PACK�442batteries.
�042360° side handle.
�042Doubleended screwdriver bit.
�04216-toothcarbide tipped circular
saw blade.
�042Circularsaw rip fence.
�042Reciprocatingsaw blade.
�042Jigsaw blade.
�042Heavy-dutykit box.
.'2:I r.
ED
B.
..89
*153
I. I 't»,�036.......,�036., . .... I....;. &.- ...............= .. ..'... . , .-I...I- .- I ,='.=.,1.': '�036..... t., '..
,·. . ··-'(i·..· ...:. · ,·
... :':.:-- ...:34 :-..:•-:' '. ·•s·i;· : · ..•..4 :.:t-
e ,. '' Dewalt
·..:.:., 4 -.., '2 :l.f, '.: ' L ' .-�042*#· •w..iL# •-t.
, /5.2»*... + '2...:,2 -. - .
..Ke.,».'::. (i..
. 1#fic:.I"i. 22: ....I35.3 : · . ::6 ·*.1 ,•*.--Z-._..
Ir-'- -,I I ·r
•LRYCZ].·e,-F lE•.•
f-/1-*Se
E·�042m-•18'rui., A,04.03,1-Iliwillidi• lillillmmi' 'Illiai•iligmilil-i.ij7.*Al....
154
t'·, 7 fdilih.jobsitas-up#iyco. •t,(.- -: .':�036.-:· Irm. . . (619) 295.:6100 Phone' 4,1.
- -....:iz. ::P:\,-4.'..,(619).295f6300 Fax . . ·©•i
BATTERY ACCESSORIES
DC9096 18V XRP PACK®
DC9091 14.4V XRP PACK®
DC9071 12V XRP PACK®
DW9061 9.6V XRP PACK®
DW0242 24V Fan Cooled
XR PACK®
�042DEWALTBatteries will not develop
a "memory" - no need to drain the
battery down before recharging.
�04225%more run-time than compact
batteries.
�04215%smaller than XR+ PACK
batteries.
�04210%lighter than XR+ PACK
batteries.
DC011 Heavy-Duty Worksite
Radio/Charger
�0421hour charger for 7.2V to 18V
DEWACT NiCd battery packs.
(except Univolt®)
�042Heavey-DutyAM/FM radio with
auxiliary port allows user to listen
to the radio or CD (when plugged
into auxiliary port).
�042Runsoff of 7.2V to 18V DEWAII
NiCd batteries making it a cordless
radio.
DW9109 Vehicle Charger
�042ChargeDEWALT batteries from
your vehicle's power outlet (except
Univolt®)
�042Automaticshut-off protects
excessive discharge of vehicle's
battery.
�042Chargesin 1 hour or less.
DW9117 7.2V-18V
15 Minute Charger
�042Chargesin 15 minutes or less
minimizing down time for charging.
�042Chargesall DEWALT 7.2V-18V
batteries (except Univolt®) so users
need only one charger for multiple
cordless products.
�042DEWACT3-stage charging system
provides maximum run-time and
extends overall life of the battery.
DW2055 Magnetic Drive
Guide
�042Self-retractingguide sleeve
protects fingers and holds screws
in place while eliminating wobbling
and slipping.
CHOP SAWS
*-=*)
Jobsite Supply
DW871 Heavy-Duty 14"
(355mm) Chop Saw
�042Powerful15.0 Amp/5.3 HP motor
provides moreoverload capacity,
increasing performande and
•0•1•ck vise allo•s for fast
clamping on different 6ize
materials to increase productivity.
�042Patentedtool-free, 45° adjustable
fence allows for fast and accurate
angle cuts without the• hassle of
using a wrench.
DW872 Heavy-Duty 14"
(355mm) A•ulti-Cutter
Saw
�042Multi-Cutter�442offers versatility by
cutting a wide variety of materials
including ferrous and non-ferrous
metals.
�042Multi-Cutter�442cuts 4 times faster
than chop saws and 8 times faster
than portable band saws in
2"x 2" x 1/4" angle ircn.
�04214"70 tooth carbide tipped blade
delivers a lower cost-per-cut
compared to abrasive wheels with
savings up to 5 cents per cut ver-
sus abrasive cutting.
..... f:.. .. .....'. S.Y-:.L'..2...•:. :..f ..:':.. S:-i.:-,1.-'.. .::..
1/'.:··/. .
'- ''»'iff l,t»'387.•'--' - r', ,-' :, '
..L.; .-SY--.·9. i..-2-2.....-C· - • • :i·
-15
t
*
-*
9.
.
..
..f'
1 .-I'l--=.1........ .. ............'i=»........ .'...............•............/---
'. -- . ... -W�036a.\ Ns.Jobsite-,siipply co: --.: �036
.i'�042•2=96fg)'295;'6100 Phone ' 31.4 3 -4 ·.· • 3-(619).295•6300.Fax . 2-·..:4.
:*....:-lui: ...i' ..: .•4 : . m I . I - 74'.�042---_-I---+6*,6.-=-,�036.....�036I. ·-.-. *Jau-.-I.-*..... ..........w�036....._-�042L•.-
AIR COMPRESSORS
Dtp•St'• )
"'Ing.#.•*,--'.\'t-*•i•. j1*'.-SS,G=,-3
.. *-'5.
I ...O . k.:.:..2 .bi.:. ... . '.eel '. ., .1 ... A
I : .P.. f:54.L.-6 -:, ..:'./•. , ,..• �042:i:.::MR ' ",
....;3:'.J.E.:'.7.:..:*.f.... ...,-2«�0365:.-'.:'.f.••.:;i,..::...• • CIZi..2...,�042..b//:..-*3...il-.../,x -
D55155 Heavy-Duty
2 HP 4 Gallon Single
Tank, Electric Hand
Carry Compressor
�0424.5CFM delivered @ 100 PSI,
recovers in under 15 seconds.
�042Oillubricated pump allows for
increased life.
�042ASMEcoded 4 gallon OSHA
recognized tank.
�042Dualsoft start valves assist in
cold weather start up.
�042Castiron cylinder enhances
pump life.
D55153 Heavy-Duty
2 HP 4 Gallon
Electric Hand
Carry Compressor
�0424.5CFM delivered @ 100 PSI
�0424gallon twin stack tank design
- with proven acceptance in themarket.
�042Oillubricated pump improves
durability.
�042Castiron cylinder enhances
pump life.
�042Dualsoft start valves assist in
cold weather start up.
./Aliswgi,bri
Lerlmilillill/olilili #ITHE/l.-r ES•-,5, -74***9* FF
D55270 Heavy-Duty
8 Gallon Gas
. Wheeled Portable
Compressor
�0428.9CFM delivered @ 100PSI,
Twin cylinder.
�042Castiron, oil lubricated pump with
Emglo's 40 years of proven
durability and reliability.
�042HondaOHV GX gas engine
provides proven reliability and
durability.
�042Lowoil shut off provides greater
engine protection.
�042Automaticidle control for reduced
fuel consumption.
GENERATORS
--=e#'Filim17*5= ·--- .... --"/9/Fi'ifitilir•
f.1//1,0/•98*Ms:•i:w
Il.9,# "•2:rtil
7•EliT'yl7ru
9. le< I .
•.*1 Dewalt
DG4300 Heavy-Duty
4300 Watt
Gas Generator
�042Honda8 HROHV GX engine
provides jobsite reliability.
�042Maintenancefree, brushless
altemator for increased durability.
�042Highamp surgecapacity ideal for
starting high amp tools including
air compressors.
�042Maximum120V power switch
ensures peak performance of 120
and 240 volt tools.
�042Jobsitetested frame with panel
protection bars for increased
durability.
�042Superquiet muffler reduces
engine noise.
�042Idlecontrol saves fuel and
reduces noise.
�042Lowoil shut-off protects engine.
�042DryWeight and dimensions do not
include accessories.
DG6000 Heavy-Duty
6000 Watt
Gas Generator
�042Honda11 HR OHV GX engine
. provides worksite reliability.
31 �042Maintenancefree, brushless
altemator for increased durability.
�042Highamp surge capacity ideal for
starting high amp tools including
air compressors.
�042Maximum120V power switch
ensures peak performance of 120
and 240 volt tools.
�042Worksitetested frame with panel
protection bars for increased
durability.
�042Superquiet muftler reduces
engine noise.
�042Idlecontrol saves fuel and
reduces noise.
�042Lowoil shut-off protects engine.
�042DryWeight and dimensions do not
include accessories.
155
.:.2
. .th
f•4"t �042-:
('4
.-/
-» »»«»»•»«•»442�036-•••••1�036••••1•r--"--42.·«•,Izi",4,14**'Ill"lfl"-Imibin'fil'$"In""pi..-,A
Jobsite Supply
, • TH*1•*I»*-'M....., ':»:•ell,f:
,., --
b kil•#5/4/3,•t ..=,»�036'
Ela:•r---- -- I . " t. .. . �036=..... *. ..»...
-sh• · I ·- -,,·- *>7.' · ·'·• .- .
S ty.,.. -' . 63:)7:7,, -:r ·. - r....,2. 41,8 :..
. ,· .:021.::17.k.' •i Dawa/t, - ...,A- '11'10: · 4*1
44..- �036:P. -"·.,·,- , ..,..'kf>.'1:' -· • 'ft..-:"-9.6--_I.- j-rE.,•t'·1;·.....•.221< . ..4... ..i'. . . ..& , . .- . -
1/2 DRILLS
�042· -· -· n
8 ./9\.el· "
1. ,
-3 .- -:r-_
ps<le/i
:Or 1
4*+......-.... · 7- ,.'U k A.,...
-5..
.r. it>: Jl.
D21009 Heavy-Duty 3/8"
(10mm) VSR Drill
�042Heavy-dutykeyless chuck
provides convenience and superior
bit retention.
�042Allball-bearing constructionn pro-
vides greater durability and longer
tool life.
�042Built-inlevel for drilling accurate
vertical and horizontal holes.
DW402 Heavy-Duty 4-1/2"
(115mm) Small Angle Grinder
�0427.5Amp, 10,000 rpm motor provides high power, overload protection
and speed for 4-1/2" grinding applications.
�042AC/DCcapacity works off welding machines and generators for
increased productivity and versatility.
�0423-positionremovable side handle for greater comfort and control.
1 -=... - '. '-I.....:. »» . ..=«S«" ...... ......t-/=..- ...="'..#•'."*I......#•-Il
156
':.--. -1 .1 , Jobsite Sup,6/y Co. :ik
..t.' . �0421-lt,.*(619)'295-6100 Phone - ". .
-;...,6.:.:21.4" (619)"295i6300 Fax · ·' I. I
6--•- 46--'..a. ,.61.-..2.-.-- -...-
SCREWGUNS
·=--'. " ' •: . Izr'i,7
-'. I. li
i m»\1, 1-�036,�036.
.. 1
e. 1
7
GRINDERS
D21002 Heavy-Duty 3/8"
(10mm) VSR Drill
�042Allball-bearing constructionn pro-
vides greater durabilit• and longer
tool life.
�042Built-intwo-way level for drilling
accurate vertical and orizontal
�042Belt.clipholds tool a•d frees
user's hands for other work.
..,•.•6------•...+ D28497 Heavy-Duty 7'79"
E.Eli.h*."f-=·U·ZZ• (180mm) Large Angle Sander
�04215.0Amp, 5,000 rpm motor provides high power and speed for a117"/9"
sanding applications.
�042AC/DCcapacity works off welding machines and generators for
increased productivity and versatility.
�042Extremelydurable aluminum gear and motor housings.
R =�036« I ..,4 ,:�036,. i «'»44' 2 =.'»' el'wl'., 'Re,w . »,="I»==' * "�036===».«»,I,»t. 1,=. '.
Jobsite Supply
: bl..:9 ...
DW131 Heavy-Duty 1/2" I.-- -rm:r• DW272WT Heavy-Duty VSR
(13mm) Spade =2"21. 'i - 1 Drywdll Screwdriver
Handle Drill'. 1 6•"7JALL - �042NoLoad Speed, O-4,boo rpm.
�042AC/DC,reversing switch. 7,\ �042Metalgear housing for increased
�0425/8"spindle for increased durabili- durability.1
ty in high torque applications. �042Depthsensitive "set and forget"
3'. �042Triplegear reduction provides
increased torque,reduces gear#I nosepiece for consist•nt fastener
depth.
10' stress. �042Rubbergrip and two-finger trigger
for increased comfortJ
i-» DW660 Heavy-Duty DW268 Heavy-Duty VSR
Cut-Out Tool 0-4.-1 8 9 VERSA-CLUTCH®.=1 Screwdriver., D•BA--'.'-1,-
•.-J=--
G5Cut-Out Tool 7; �0420-2,500rpm. •
�042Helical-cutsteel, heat-treated
provides more cutting power..t gears for long life and' durability.
�042Highpower motor.�042Tool-freebit change for fast and
�042VERSA-CLUTCH® torque adjust-easy bit changing without a wrench.
ment system.
- DC5501(A Heavy Duty
.....04. DW292 Heavy-Duty 1/2"
Cordless Cut Tool ft Til•-1 (13mm) Illipact Wrench
IM•'MEl �042Toolfree bit change, 26,000 rpm �042Deliversfull power; 240 ft-lbs of
7. 1 , 11 motor, dust sealed switch.
idilillillillpluill'Jill#lit#ALi --
\torque in forward and •reverse.
�042Includes:1hr charger, 2-18 V XRP , �042AC/DCforward/reverse rocker
--9*-_, battery packs, 1 general purpose switch.
., illlt• bit, 1 drywall cutting bit, 1/4" and 2., �042Detentpin for secure socket
3mli1/8" collets and a kit box. retention.
3/8 DRILLS
jil
-'.....- 't=«»"t,I•..�036«.... 1
...: ,:I'. ; l ih<Jobsiti,"'#642ply CO. , . ILI '
R: ,•(619)5295•61"00 Pho'ne - ·6 «4&
''•R., ..t,(fig) 2'9£*ihb F,k-: · 't...4,·;S .1 .i-*----.-_i.*--1**':id· 1' ..··-- _- -1.-a- �042.�042t-·w·....L-6..'*.-6--- * .,.,k.. -4
rl
OSC•
.•,•....
--.jillilkillillililk:llirf
1,--1............../ ill
1
II '-i·.t,« -Ill-- _
il ...IN.
:... ·":' · :. di:;
... r... :, .... . ....- ,
..i..•,9779.1.1 .:...' 22. '·.-· .•·st,-2.-:5'.:.':·:- '
4 *A.2*'.- w.4*d-- . ., -31--,··-Al: ...L----' . 2
ROTARY HAMMERS
11224VSR 7/8" SDS-PLUS
�0426.9Amps; 0-1,100 RPM; 0-6,150
BPM.
�042Electro-pneumaticimpact system
with maximum impact force and
minimum vibration.
�042Multi-functionconkol.
�042Variable-speedreversing switch
D-Handle.
11221 DVS 7/8" SDS-PLUS
�0426.9amp/0-1,040 RPM/0-5,750
BPM.
�042Integrateddust collection
system.
�0423Modes of operation
11239VS 1" SDS-PLUS
�0427.2Amp motor;
0-1,050 RPM/ 0-4,000 BPM.
�042Dualfunction control quickly
converts from hammer/rotation to
rotation only.
�042Electro-pneumaticimpact system
with maximum impact force and
minimum vibration.
11236VS 1 -1/8" SDS-PLUS
�0427.5amp motor, 0-850 RPM,
0-3,900 BPM.
�042Variable-speedswitch for
accurate bit starting.
�042Vario-lockpositioning rotates and
locks chisel into 36 different
positions.
11222EVS 1-1/8" SDS-PLUS
�0427.8amp /300-700 RPM/1,650-
3,900 BPM.
�042Constant-ResponseTMCircuitry.
�042Variablespeed dial.
�0423Modes of operation.
-1. I =EL _191..»'--I.'••=..'.-,-.......4...........-Wil
=.---
Tlf
I...ir'Zr•....-'.11..",i,6,9- 11=--*/ri-,-ti-- I.-
tir
lillillillipillillillilliqllT•r
•
Jobsite Supply
11240 1-9/16" SDS-MAX®
�04210Amps; 3,000 BPM.
�042Impactenergy: 5.2 ft. lbs.
�042SDS-max® bit system with12-position Vario-Lock�442
�042Combinationdual mode selector.
�042Innovativeservice modules.
technician can quickly replace
the brushes and cord.
�042Integraldutch.
11241EVS 1-9/16 SDS-MAX®
�04211amp; 1,700-3,300 BPM.
�042Impactenergy: 6.2 ft. lbs.; Turbo
mode: 7.4 ft. lbs.
�042SDS-max® bit system with 12-
position Vario-LockTM
�042Combinationdual mode selector.
�042TurboTMp•wer - Delivers 20%
more power in hammer only mode.
11245EVS 2" SDS-MAX®
�04214.0Amp; 1,100-2,250 BPM.
�042Impactenergy: 13.3 ft. lbs.
�042Combinationdual mode selector -
2 modes of operation, rotary
hammer and hammer only mode.
�042Variable-speeddial - For accurate
bit starting and controlled chipping
applications.�042ConstantResponse�442Circuitry -
Soft-start, maintains constant
speed under load, and provides
overload ·protection.
11235EVS 1-3/4" SDS-MAX®
�04211.7amp motor, 120-250 RPM,
1,000-2,400 BPM.
�042Turbopower assist in chisel
mode, increases power 20% on
demand.
�042Electro-pneumaticimpact system
with maximum impact force and
minimum vibration.
�042Constant-responseTMcircuitry.�042Dual4unction control quickly
converts from hammer only to
hammer with rotation.
�042Variable-speeddial for accurate
bit starting.
i ' Bosch ,::....«.2.... ....
i-, I ..•
t.,4••'•
I.,«,=,»,.......1
157
m '-•Irillili•d'4"/«44"'4"#Rim"'m«1•-/""re""47*'9»,1•,2,•'*,Ili,«'Im"Ar'==«.=="":FI"'m"'I:I"'a#i», »fi»,«•i..,1�0366
-.. »..'......'.....
'» ·· ··'· ' .,. ' -t' ' ····22.%,1':' . St)' rl ·'s,.
f Ic : Bbs4hl•,•2 k . frA•iNE .. . 1-1 . 7 '4 '.. .:. .'. I :
amtk..A·:. ' ..•*,Sii-Li'it..»,2•41.-
7 I ..=
158
t.
· · · -A•. .1:.
' 'I.-�036r........:.#1.4....' ·-t·'
DEMOLITION HAMMERS
a�042rmiwi'- F 4/////*//5.:MT'Mly
-I
0.
1.12, 1' .1
11316EVS SDS-MAX®
�04214.0Amp Motor, 900-1890 BPM
�042Electro-pneumaticimpact system
with maximum impact force and
minimum vibration.�042Constant-response�442circuitry -
monitors and adjusts power to
maintain desired RPM.
�042Balancedweight distribution for
horizontal and vertical use.
�042Variablespeed dial for accurate
bit starting.
�042Vario-lockpositioning rotates and
locks chisel into 12 different
positions.�042Weight - 221bs
11317EVS 3/4" Hex
�042Powerful12.8 amp motor;
850-1,BOOBPM.
�042Impactenergy: 16.5 ft. lbs.
�042Variable-speeddial - For
controlled chipping applications.
�042ConstantResponseTM Circuitry -
Soft-start, maintains constant
speed under load, and provides
overload protection.
�042ServiceMinderTM light - indicates
when preventative maintenance is
required.
�042Paddedrear handle.�042Weight - 221bs
11304K Brute Breaker
Hammer
�04215.0Amp Motor, 1,400 BPM
�042Pre-lubricatedgear box and
hammer mechanism eliminates
uncertainty of job-site lubrication.
�042Shock-mountedhandles absorbs
vibration to reduce fatigue.
�042Kitincludes two moil points, two
narrow chisels, and one hammer
hauler.�042Weight - 641bs
' . ·-·1••ih Jobsite Supply Co. • f.
. . .1�036•d=3(619)'295:61,00 Phone .'
- 3,2.9.2t-9-- (619) 29»00 Fax - ' ·" :...
GRINDERS
·--,/ 1710AD 4-1/2" Angle
''tr/«= Grinder�0427.5A motor; 11,000 RPM.
�042Quickrelease guard for tool-less'.t. . installation and adjustrlents.
h. «4. -I �042Superiormotor protedtion.
94..0•--- �0422-positionside handl• -
IMM--6 Specifically designed and angled to
a "natural" position for maximum
:5:J;,ansp•21,1- Most
popular size for a wide range of
accessories.
�042Spindlelock - For easy wheel
changes.
• 1752G77" Large Agleifir-4-J- 31'.0 Grinder
rt,%2.F �042Reinforcedarmature windings -
5-5..i- Protects the motor against abrasivegrinding dust.
\»'.3--4. �042Spiralbevel gears - Quality engi-
neering and construction for
smooth power transmidsion
�0425/8"X 11 Spindle -VIAde
flexibility for mounting most
popular accessories. 1�042AC/DCswitch. •
�0423-Positionauxiliary handle.
CUT OFF SAWS
---1 1364 12" Portable Cut-Off
al=.4761- Machine'f •L-.t••L �042Highpower-to-weight ratio.
9 :SWIr �042Noload RPM: 5,000; 15.0 amp.
11 •aj-2 �042Two-positionwraparound side4/Il•/. handle.
�042Largefootplate impro•es stability.
1365 14" Portable Cut-Off
b ., \/...1, Machine�042Highpower-to-weight ratio.
111 /12:lipy �042Noload RPM: 4,300; 15.0 amp.
M.A/K: /31& handle.�042Two-positionwraparound side
�042Largefootplate improves stability.
Jobsite Supply
46.13 . .:. 3A..
,-<,.6
4XSET I.4
I ..IWIL.-.1 1.' ' I
,
f1j
0 1»«
»•'t't-'· '"ll'•-• t "·•'S '•t �036--s ,·« • ', · «»*»»i•'.... •.i .Bi�042,' »= i. ./ », · �042t�042S «... i• '·' '•»It't•�042•ti•«-t•, ti•·�042_•t, . ...· ttl- "..... t- �042• • «'.t•,.' s.• -. .»•i.· ·. .•'-I-/.I ·/
•Zi•,3)6bditaf#i,PB#ly co. 2,, S · ,fgh·. J·.:f ...=i:L . - -•IC : + :I. -,- ..· • •-
.I 1 m-123F(61•9) -295•61 dO, Phone - -i, -I-:'.,i. : ... ,-fl; '3• -;.. -:9 .....
.6.•·4'',626'19)2•51-BEJOb'.Fak 'ff'.2.f...· ,- .•.:i'ilt .:, .. .: ..2•··s·:t,«•.' " -7 7:t.-:.Hi::·.44- 3:9.)'.: ... ....•.:
·· ·· ·· ··- �042·-,,·�042·•,-8-L'*-4-Mu L--�036�042·..·--4.--Ev---2*a.•-a----f--i--4-.--1•• ''· " *.�042*.·.
7"fi•JbBOSCH G..8
4'-0
I•.•lll•/r1-,Fl•
6,7adilitr //
.=liti- --
,-Miz- Jb-'11==,A:- 1-'-I---.•il'
r
1677M 71/4" Worm
Drive Mag
�042Powerful15 AMP all Ball Bearing
�042Motor,4400 RPM
�042MagnesiumMotor Housing
�042Built-InSaw Hook
�042MagnesiumFootplate
�042WormDrive Gear Train
�042Left-SideBlade Design
�04250Bevel Capacity
�042Anti-SnagLower Guard Design
Large Adjustment Levers.
�042SpindleLock
�042FootplateScale.
1587AVS Top Handle
Jig Saw
�042Noload SPM: 500-3,100; 5.0 amp.
�042Tool-freeblade change system
�042Exclusivemulti-directional blade
clamp mechanism for superior
blade hold.
�042Low-vibrationdesign
�0424-Stageorbital action
�042Lowposition roller guide
-Includes Three Assorted Blades,
Steel Footplatelnsert Kit,
Anti-Splintering Insert, and case.
BOS4000 10" Worksite
Table Saw
�042Largest'table saw in it's class,
and completely portable!
�042Designedto do more, with it's
stationary table saw, performance
that goes anywhere.
�042TableTop dimensions:
29" x 21 1/2"
TS1000 Folding, Portable
Saw Stand
�042Setsup in seconds, folds for easy
and convenient storage.
»»»: I
9/ 341 \''9 -.'. m-.4.26 .=.:a- .189
'Izzz#.
/54« : 4e . 0*./2
320'&*i: 1&-'.:.- -. -Il.- .---I-/. =14
Ii--<;i)
Jobsite Supply
Bosch-·
SKIL HD77 71/4" Worm
Drive Skilsaw
�042Precision-machinedworm drive
gears with 71/4" blade for
maximum power and durability.
�042Oilindicator level and relief
bellows for long life.
�042Die-castaluminum motor and
gear housings for durability.
�042Pushbutton blade lock for easy
blade changes.
�04222amp switch and heavy gauge
cord for dependability.
SKIL HD77M 71/4"
Magnesium Worm Drive Skilsaw
�042Lightmagnesium housing (2 lbs.
lighter) with 71/4" blade provide
durability, lighter weight.
�042Precision-machinedWorm drive
gears for maximum power and
durability.
�042Oilindicator level and relief
bellows for long life.
�042Pushbutton blade lock for easy
blade changes.
�04222amp switch and heavy gauge
cord for dependability.
52318B 18V Jig Saw
�042One-Touchblade change system
for·•quickblade changes - Ejects
hot or broken blades with the pull
of a lever.
�042PatentedBosch blade retention -
Exclusive 3-way grip maintains
blade position for precise cuts.
�042Large,die-cast aluminum foot -
Provides stable guidance and con-
trol. Also, comes with foot cover to
protect finished surfaces.
· �042Powerful,Bosch built motor and
magnesium gear housing,
�042Variablespeed trigger with
ambidextrous lock-off switch.
�042Ergonomicsoft grip handle design
with multi position grip area.
,«="· 1
159
.,5
%
-:1":
FATRI
1%i.: e5
1.- ...........•..-/.I- .)--..-I....-......�042..)#'•#.. ' .»«»·'�042•·..»�042·.I»lilI......... .. :':r-».« ' # t.' ' ... ,. .»,» ' »».*I»»».t.....'.lilI ' 'S
.
-
.......,...
•4 ABoschk),•,;-:. - . :·t · -ts,i.,1....ff•):•:• -. " 1-1.•
--Ase...•._-.--:.-:.S:Vul-141-1--t
SDS-Plus Accessories
I ' ' d E..,4.7.·:.' ··'30•.·.' -
.... . .-•- S..·. .'. - j.it'.·
�042.--......�042,--....-�036L.*,
1 618 580 000 SDS-Plus® Right Angle Attachment
IMI.*MIEM.w•ki
-*...'... 7 11:.: ..- ....
1 .' '.·..·- • " " -..t··*:r.'I
-_.2.Z9.2&-·--.-
Angle drill head for effortlessly drilling concretein hard to reach spots. Pivots through.3600ensuring correct positioning for any application.
�042For SDS-plus* Rotary Hammer Catalog Numbers11224VSR, 11225VSRNSRH,11228VSR, and 11234VSR.
1 618 517 014 Chuck With Integral SDS-Plus® Shank
CRK005 Replacement Chuck Key
SDS-Max Adapters
�0421/2" capacity chuck with integral SDS-plus* shanI(.�042Use for straight shank drill bits.�042For wood, metal, and fastening.
�042Canbe used in the hammer only mode.�042.Forall Bosch SDS-plus* Rotaty Hammers.
.
+ / A Jobsite Supply Co. a
•.8 (619)295:.6100 Phone' ,�036•,,
ptt«' • .(6191 295»0 Fax - 1,•
-29 ,, • 2// _· '
-I .TE=*123,•
·1-·4141 kif- -
1 'Wk. Remove side handle to attach144' J%' ••'' 6 To•llength increases by 2 3/4"'
1 1 - Yq ki;y i. ·Toot length is offset by less than the shank•11 p insertion depth into the bit holder
1·1 • �042Im•,act strength is reduced by approxi-Ill mately 40%
· Bosch offers the following adapters to make it easy t«i move up to SDS-max* while still utilizing your current ·
SDS-plus* and spline accessories. ·f-
;illi#'Il. 11.34.ET/&14.ild.,·
..Ill/--
'Fl .:,1/.• 1 - 1'3*1---1 · · · - ·· -1 -* ..·. runrEETT/:1'., --illiv ...&111,1. •
SDS-max* to SDS-plus* Adapter SDS-max* to Spline Adapter • '
SDS-max' to 3 Jaw Chuck Adapter
HA1020 Spline Drive to SDS-Plus®
E.*.*�036..,I•--7lit=t, %»f li ,•
..m.U.•7
-Heavy-Duty Geared Chuck Kit
Jobsite Supply
•../
•.-1-1 i«al::I ). 'h...<./.1•
.......·
SDS-max* to 3/4" Hex Adapter
Catalog No.
HA1030HA1031
HA1033HA1032
CKK005
Type
SDS-max* to SOS-plus AdapterSDS-max' to Sprine AdapterSDS-max' to 3/4* Hex AdapterSDS·max* to 3 Jaw Chuck Adapter
1/2"-20 thread
Heavy·Duty Geared Chuck Kit1/2'-20 mount; for straight drilling inwood, plastic, steel NOT recommendedfor hammeing
r ..
., EP.
;
e•r.iti1/. Ni
18'Je=-1 -L.ZIet1.21er'ISi
i
.<
F...............'. .......I-*-I
160
4
TE
1
».»»»»««,it.-t�042.»,•»•"••«.£#*•·t»,•»·''.=«•«-«.'• t'•S,•»»•»•«»••••'·•»»-»�042•1»«-'•«'t»"· . . I'»"«»'t'«'»-'"»"'"»»«»»»»»»»••""••"•»"""'"'"•""•'"'•
.....tria :9 .... ....1 2,>r'. • . .:: :l\. *,Jobsite,Supply Co. .. . 1
f�042|•295*61. Q•O, Fhaite 2 .-9-:42..,....,
:... r -5..-· : (619) 295=6300 Fax· en . 1
I../.-�036.-...........-..............,... .A'.,---............ ,
"SSI.DJJIIDIO:.
f•jillillillillillillillillillilir•liWrf
A �042
•Cl k,I:DIoll
Drill and Impact Chucks
KeylessChodtAttadiment " . - , zConvatilmpactinto , Jlli••'•r,DISM#*W I...bbil/190-i*&)*.shinkbits ......7#•Ika-#-,
Ke,1815815'dunentGiwelltentl,con«•iKey- .IDrill(hudt &,to Keiles: Chuft
* ......1.E....."i===,il
1,·41. .fil. :Af ...4.2 z: . •'* .-,7f.·".'. '....7 .»t ,··· 4.1• . '3.'!
6 . ).4..79..........4·a. 4 4/ 4 -.
•;.'*�036............ -..
Auto Battery Shutoff(ABS) for Consistent Fastening Torque· Angle design for working in tightspaces;tooly,Idthat head b 1-11/32'�042Exttalongtoolbody(15-9/167(ured,inghtotightspacs
�0425 to:queseuing=17A,30.4.41.6.52and 69.4Wk�042Bectronkdutchmdanismadomatially stops toolw•en a specific
s t•que bmadted�042Rubbercoatedtoolheadprotectiv•1(pieceftomsclatches
MODEI.6706DWAINCLUDES: B•te,79102 (19253+A),Charge, [)(1411.Battety cover (414938-7).Mastktool ase (824380·8)
3/8" ANGLE DRILL (VariableSpeed, Revenib/e)
Ideal for Close Quarter Drilling or Driving
· Me=soni,3-1/2"fromtipofdtudctothewidestpottionoftoolbody· Vdable speed (0 -1,400RPM}foreaystaning and acatrate hole positionmg�042Wbedngenmidonforlongtodife
�042,Revenibleforremoving sarm.-.�042Paddles,titd,foreayone·handedoperation
· -r'�042Double blsulated
MODEL DA]OOORINCLUDES: D,11(huck (1934434),Cluck key (763414-1)
ANGLE SANDER (AODO
Rugged Metal Housing for LongTool Ufe
· ktmheavydut,motorfor high pmductionand wntinuous use
· Allb•andneedlebearingsforlongtoolrtfe· A•ept,To,Fv,lieelnithatrectguad,Instaled· Sidehandleanbeinsta•edoneithersideofthetool•ropemtorconvenience· AUDCswitaforusewithalternativepowersou•ce'�042Spindlelodtforeas,wheeld,anges
MODEL GA7911 INCLUDES: Side handle ( 152492-0),Spindle washer (261039-0)
1/4" DIE GRINDERUghtweightforControlled Grinding Operations
· Highspeed(25,00ORPM)formainizmfd,Ktion· Allbalbedngconsouaionfulongtoollife· 1/4'colletcapadtil/F'conetavamble· 3/4"mafmum wheelsimforsmal grinding appliations�042keptimetalattte,sandbunsforpeductionwork
· Doubleinsulated
MODEL GE0600 INCWDES: Wheel point (741616-9),1/4" eller (163625·81Wrendi #10 (7810034),Wtendi :17 (7810084)
.. *-0-,5..., .:.3.:......... . .- ...
•.,-·, ·- · i , 92, Makita 1 .-,..:.:. ...·., ·.49*'"-6,·." .. Y.. . ·· 'if
• SPECIFICATIONS:
Squ;'4*2�036�036�036�0361 11010.,d speed .......' , Watt hours .. -....1 Battfry...........10,·e,3!1 length •: 1:ct weight ........• SH,•ng reight . �036
1 .. .
• SPECIFICATIONS:
1. Capacitiefi1 ' Steel............i· Wcod..1.........f N·)1:.dm:ed ......• AMPS(115V) ........
:0=6#4&.�036�036�036.1 Nety.eight ..........• Sh'ipplng weight.....
5 PEelrICATIO 115Giirtal,#heel _
1 V,lii,upbiu:h,gridnid,4
i liul· dif r.d _i 'F Gdle Ike.id
Allr.1115\11 ...1 0,p':11 lenglh
Illt b rightSh'[ping ,4, ght _
' SPECIFICATIONS:
Collpt ··ize .... ......110 lo id ·.pped . . ......
, AMIS,(115V) ,.......i, Ov(ialll, iigth,,..,.... NM 'dpight �036--.-
Shipping wvight......
....... .......3/%"......... ..400 RFM
.................19.2.......96VDC(2.OAh).�036�036�036�036...15-9ne....331bs.(Wbattery)· ·..............87lk
,--.........,3/8".......... .5/8"....0 - 1,<0 RP.W............ .2.8......... 10-3/r -···......33155.........;.4.613.
., , , T' ug' ,6' •
6,1 Lu F PM ;3:6' -11 ClIC i
15 0 <1,11/41 1
12 216-'tto b 1
........11.....an:,;lum......... .20.......11-1/8"...... , 1 0 Ob;.........3.5 Ibi.
• KeyedD,matudcAt:,dimentSet tti,26•/fl.M &U,ID·.••m•
vr l,z•77.0 • •/2"Mrfirllm'/11'll<19/1/'lil:Glia
.= W=««-, ...... ..�036........ . I -, . 1
Jobsite Supply
.....:::
'.2.
//lk& 14 11 /3/. 0 D 11 * 9.6V SCREWDRIVER KIT (Revenib/e)
Extremely Predse Fastening ofScrewsto UniformTorque SP[CIFICATION5:
�042Infinite torquesetting from 43 illbito32.111Llbi Ilex.sh.Ink ........,.......,........1/:"
· Autom,tkstopsystenvelectticbmkesmismotorafterdurthaltsin86*Md.................ANAMWd*,111:Crs........................19.2�042Exualongtoolbod,(14·13/161formadingintoti•spaces
· Snmhandle design for eisy g,IppingUM ................. .9.6VDC (1.0Ah)0,•r:Illength.................14·13/16"
. �042Qukkatangi 1/Thashank(huaIletwught..........3.tlbs.(w/tjl:rty)Ship;irigw,ilht.......,........8.91,ii.
MODEL 6705DWA INaUDES: Battery9102 ( 192534-A),Charger K1411,Battely (me,(414938·7).Mafctoolcase(82438•8)
Erkierill"bl 9.6V ANGLE SOCKET DRIVER KIT (3/8'SquareD« Revenible)
,.
I.
�036i....-'.,-• '.,--....1
161
1
-
..
'�036�036�036'«».I -*... « »»=.»»..... "». ..-»t,=="t...•..-,»»'.. ....t ....'...»......#-'. ..#.. '., ....=�036'�036'.».,...==.*«
Fd. ..... !.....:.>'........ .:.•2: -·: . . . ·.
.-:; ..... :. 0. . -••·"..,iy.>..,·:»..,i·.3 -': 1 '"N Zf. -:• ......'.....
I..: ' - /: •./.7,4/.li. .." .i, Makitat 95>'... :- ..•t..F':'.......
3•1-9.- 1:• .24•lf.'•..:...2•3•'6,..i.--i«-._ '-.19....·--2:.'il.
4 . -- · - .t' ..2•, f t , , . -3, i 1, . :-..1 A Jobsite Supply Co. - 'i
2.- ..:4... , .. ....4 . • (619) 295..6100 Phone
.*k:;:'-'· •·"'·'.'•'•..·:.·i-"sr.·--48•18" 1: (619) 295,6300 Fax · •'"..
-.. . .....1 ----- -I--- --.."I...#...--* .
•7ZMBUVFFSDN (1•35) 12V 3/8"ANGLE DRILL (VariableSpeei Reversible) 1
High Performance - 2x More Workthan Competitive Brands
· Powerbil 12V (UAh) 111-MH Attely· Compact design ispetfed fordosequatterdrilling andd,Mng�042Measursont,4-1/8"fromtipofthed,ucktowidestpottionoftoolbody
" . · Viablespeedtliggerforpredsespeedconuol(0-800RPM)· Conveniently located forward/reverse switch above the Digger· Beatkbrakestops the (hudg qwddy
.
K•*Ij,A,4,& Dl•
im
•t
ilingl/15/9,/akeLEq
MODEL DA312DWD INaUDES: Battery 1234 (193157-9,Charger 21411,Batteryomer (414938-7),Platk tool cae (824627-0)
MODEL DA312DZ INCLUDES: Tool only
12V IMPAa DRIVER KIT (VariableSpeed, Revers/ble)
Fastest Impact Driver in its Class (0 - 2,300 RPM)• 1· M•mum Ag#49toque of837in.lbs· Compactand lightweightdesign withanoRIalilength ofonly6·58'· High perfonnance two-piece D-28R motor with rare eanh magnet
dehetsmorepowerinalightcompactske· Magnsiumgearhouiingfordumbilky· Ergonomiall,designed Iubbe•edgdpfor positive contml :· Powerful 12V (16Ah) NAMH battery 1
•*•#-:•ill--- ...
- -40#41*iprEE--1
49,9•Et
e
KElfk•11111143
-r .21 '164.1
MODEL 6916DWDE INCLUDES: 2 ea.Battery 1234 (193157-51awge,Da411, Batterycover (4149381,Platktool cae 0244896)
' SPECIFICATI0115:Caplcilles: Sltrl....... 3/8"
Wood...........:...,,..1/2"',' No loil speed . �036.·..........0- EOORPM .·
Mazimum torque...... ........ 44 in.lbs. :Watt hours . . ................. ....311Battery. .................12VDC 12.6Ah)0 venlilength ......... .... '12.311,
' Notweight ............3'311,s.(w/bltery) ,ShiF;ling weight: DA3120WD ... ... .8.Olbs. '
DA312DZ ....... 14 lbs.
1 SPECIFICATIONS:Ilex th:nk ......No 1.,ad ,peed .....,Imp.lits pef min:te .Moximum torque...Wan hours .........B.ilt:ry ............Ovuall length ......
1 Netweioht.........i Shipping wright ....
9.6V 3/8" ANGLE DRILL (Variable Speed, Reversible) i
Measures Only +VS" from Tip ofChuck to Widest Portion ofTool Body ' 5 PECIFICATIONS:
·Compaadsign fordosequarter dtil•ngand dti,ing· Power619.6V(2.6Ah) Ni·MH Battely for up to 2 timesthemn time
· 3/rkeylesschu•kforfatandeasybitchinges· Vdable speed trigger for pmdse speed control (0- 800 RPM)· Conveniently loeted forward/reveBeswitch above themgger· 8eaticbrakestopsthechuckquktly
MODEL DA392DWD INCLUDES: 2 ea.Battery9134(193156·7),Charger DC1411,B8ttery mer(414938-71Pustic tool ase (8246274)
MODEL DA392DZ INCLUDES: Tool only
(FiR) 9.6V IMPACT DRWER KIT (Variablespeed Revenible)
3x MoreTorque 090 in.lbs.) than Typical 9.6V Driver-Drills�042Powerful 9.6V (2.6Ah) NWAH battery
· Qmpactdeslgnwithanoveraillmgthofonly6-5/8"·Magnesiumalloyhammerasingfwtoughiobsitedinbilty· •Quidlhange'l/Thexbit retenton system· 2 times faster (2300 RPM) than ddvtf-dtills
· Highpe,formancemo-pieceD-28Rmotorwidinreeanhmagnetdelivers more pmerina ight,compatsize
MODEL 6990DWDE INCWDES: 2ea.Batte,y9134(193156-7),Cha•ger DC1411,Battery cover (414918-7),Plastic tool ase (824489-6)
...�036�036�036�036A,.1/4".......0-2,300 RPM
0-3,OJOIPM. .5 57 in. lb s. 1 1 S N ·m
.......12VDC (2.6Ah) ,
...........'...6-5/8"...3.3 lbs.Iwibittery).............931bs.
, Capadties' Sled ....................3/8" '. Wood .................. .in" 1
i· No load speed ...... �036,...,.0.GOO RPM •Maxiinuni toique .......'.�036...·..44ki.lbs.:
1 Watt hours ...........;............25.0 ;'· Battery ............... ...9.6VDC 12.6Ah) · :'·. Ovetall length ..........·.-.....12-3/4" i
N et weight ......... ...3.21bs.(wkmmy) iShipping weight: DA]92DWD ......7.8 lbs.
DA392DZ ........2.3 lbs. 5
SPECIFICATIONS:1 lirishink.........
110 k.d*ed ......r Imp,Flts per minute .
fllxilnum torque....WmAM........
, Battery ..Ove:'.It length .......Netwright... ......
: shipping weight....
9.6V IMPACT ANGLE DRIVER KIT (variable»eat Reversible)
Compact for Working in Tight or Remote Spaces
· Toolwidthattheheadison#2-3/16•-c�036»-· Hightorque(260.#inJbs.)andvatiablespeed(0-2,OOORPM)
- . *, -, 4 · Employsanimpaasysteniformorepowerblfa•ening(0-2,7001PM)
3· Converts intoasteightdtiverorratchetwrench with optional
head attachments
MODEL 6940DWA INCWDES: Batter,9102 (192534-A),Charge,DC1411,Battelycover (4149384},Phillipi/slottedbit (784613-AlPlastic tool ase (182439-A)
Jobsite Supply
i SPECIFICATIO115:
) Hex sh:nk.......[ Noload speed .....
Impim per mint:t2 .• Maximum torque..
; Witti,Culs ........' Battery
1 Ovedllenglh......f NcI weight .........
Sh:ppitig weight...
...............1/4" •
.......0,2,300 RPM 1.......0 -3,001) iPM '.790 in lbs./ 69 N·m
...............25.0 ·
......9.6VK (2.6Aht ]
.............6-5/8" ,
3.0155.Iwibjttery) ,.............8.91)5.';
............... .1/4" '...0- 2,000 RPM
.......0-2,700 IPM. .2(44 67 lbs./ 29 N·ni
......9.6VDC C2.0.1,h ) i
............ .146/5" 1�0363.1 lbi.Iwjbancry) •
.............7Albs. :
6-
../t .-I.
/
../
Ilit
1
,+4-*#*..'''A2**FA»YS'*»3:ia�442ille-+%1*'*if,:,•@w•-9., .
162
i,•'i..i;il•.fq0.b.•n.•Bi;86*.*Of",1•.1;i, '6..:elit•2<6•19)=295;6100 Pholie •. - u.:.T · :i ·
a..·r.-1:·•· · ·'· ·t:, -·-··, ··· ·,�042··4, - '.: ' ... . ..t•·r.AS:..1#3 '91619).29546300.Fax" . ·332;.,3:6'· :.:...:'........
24•12.r:•.*•,•i,••:.'3•••I-L•.fil, ·•.:'F'.•,:i.:•"•·6,
KD-20018 Gauge Shear
All".A �042Theseshears cut sheet metal up• to 18 gauge in straight or contour
Ae.... 04 lines at 180 inches per minute.
�042Cutsplastic or Formica up to
3/32" thick.
-0,/"*•019.--.0,•.,�036..
e
Replacement Shear Blades
60-21 Center Blade
60-22L Left, Side Knife
60-22R Right, Side Knife
Kit #102 Combination of the
above including 60-27
spacer bushing.
KD-44014 Gauge Shear
�04214gauge mild steel.
�042mostgrades of stainless steel
to 18 gauge.
�0425AMP KD-440 cuts at over 150
inches per minute.
Replacement Shear Blades
40-21 Center Blade
60-22L Left, Side Knife
60-22R Right, Side Knife
Kit #106 Combination of the above.
..·· · :I-. .. ' ..: 1' :f· ..' *1*'.- 5 rc. -:
.... i .«- ....'' ·J-4-• J-• •: 7.: ' · .. ...,4- 1-'·•F•••2-•:-//1•, ' •t.:. . .........2.=ST .:.... ." ..
- .*1/1://as....-L..... :.... .
KB-301-1(218 Gauge Shear
�042Apowerful 14.4 volt motor.
�042Cutsup to 150 inches per minute.
�042Cutsup to 18 gauge mild steel.
�042Cutsstainless steel up to
20 gauge.
�042Extendedrun time NiCad battery.
Replacement Shear Blades
60-21 Center Blade
60-22L Left, Side Knife
60-22R Right, Side Knife
Kit #102 Combination of the
above including 60-27
spacer bushing.
.if...4,;.Ii
.-\.19
.
-21r .-*-7N»fE.. 1111'i<200'00/
\/4-
*.7'..iligili•zjipilill.1-.--11ii'll
Jobsite Supply
-..t«. .2..r/:· V . ...: '6.
�036.t v Shears d
.. 1,
DW94OK-2 Heavy-Duty
18 Gauge
Cordless
Swivel Head and
Shear Kit
�042Poweredbythe DEWALT 12V
"system" of battery packs.
�042Headswivels 360° which allows
user to access tight quarters while
maintaining comfort
�042Cuts7/32" strip which continu-
ously curls out of cutting area giv-
ing consistent and accurate cuts.
�042Cordlesstool allows user to take
the tool to the work piece.
DW941 K-2 Heavy-Duty
18 Gauge
Swivel Head and
Shear Kit
�042Poweredbythe DEWALT 14.4V
"system" of battery packs.
�042Cuts7/32" strip which
continuously curls out of the
cutting area providing consistent
and accurate cuts.
�042Headswivels 360° which allows
user to access tight quarters while
maintaining comfort.
DC4901(A Heavy-Duty
18 Gauge, 18V
Cordless
Swivel Head and
Shear Kit
�042Headswivels 360° which allows
user to access tight quarters while
maintaining comfort.
�042Cuts7/32" strip which
continuously curls out of the cut-
ting area providing consistent and
accurate cuts.
�042Cordlesstool allows user to take
the tool to the work piece.
i
.•1 16: i.=ids,
163
-•-il-*i.......-.................t....#_I,tt••t•• .·....·»«.....=.....»»,»,»..•.-'....,
-7�042·.·27�042-,5·.. . . . ..+ .. ".,1.,j �036.Srk, ...e.'.i. ...
/4.'.,·'-lit.,/3. Z.: ·.t t,<......' '- -, • • -'il• ,. '"'."- 74'*8:....
i t Greenlee •40.'.:NX,·. 1,4 . r. 44*P .... )•.
-- -.-...>eze�036.. 13»WILZ.1.1.i ·M---._1*V
[EI]Ban:ra
-« Bush#
01.
*: 0,=Stud# 0, 1
».
IA %9 21- 'Pr :..t:s-6-
3.-I:*e•LA
TS>,
: . 44··/ .- .'... 'all-'ll.A·% fL- /• 1 , Jobsite Supply Co* Ek
•• (619) 295.6100 Phone . -*':
-:1 30...sk:fix- . (6191295,6.300 Fax .I , ..'-1
HOLEMAK•NGStandard Round Knockout
i. Punches 0.5" - 5.675"
�042Round Standard Metal Punch
Units are complete units consisting
of punch, die and draw stud.
�042Usewith manual, battery-pow-
. ered, hydraulic, or ratchet drivers.
�042Properlyassembled through pilot
holes, they will make clean, fast
and accurate holes.
Specifications:
-Capilcily .,,• · Mild steel'uplhrough 10 gauge,(3,5 mm):· · :. · .... •. :- rApplication Punch mild steel, aluminum, fiberglass and plastic.11910 Brab:'· -;j,: .527,·'.IGE; 13-,·:·:f .;):.:2,;-..t...:.....'.:.= ' r .. . ,...• . .
Conduit Sizas•Hole'Like isoutside diameter of US conduit sizes.. .',. ..;., 3:tExatfiple: 1/2," conduit size punch actually'makes Ei,7/8".4018
Pg Sizer. :>17.European.standard pipe sizes29, ",.11'.2:;*,-·'.,5'8,: ",:::·:·:... ISO Sizes:, .4#Jotemaliddal#gIlda[ds.Qrganiz*.ioft.p.ipe-sizei.·" ·:· "*,:. :
Operation Operate with battery-powered, hydraulic, ratchet or manual drivers.When used with battery-powered, hydraulic, or ratchet drivers buy thepunch and die only; the draw stud is part of the driver kit.
Slug-Buster® Ram and Hand Pump Hydrolic Driver Kits
�042Fast,easy and simple to operate.
�042Compactdesign for field use on
construction sites and
maintenance jobs.
�042Punches10 times faster than
wrench method.
�042Willalso drive 751 Cable
Cutter head.
�042Can be used with all standard
round, Slug-Buster® and
Slug-Splitter® punch sizes.
�042Canbe used with non-round
punches (adapter may be required).
�0423-foothose.
�042Powerful11-ton hydraulic ram.
CAT. NO. UPC NO
7306SB · 34360
7310SB 34361
7646PgSB 32799
38520 - 38520
WEIGHT. DESCRIPTION LBS. kg.
15906 Driver, hand pump, draw studs, adapter, spacers,Kwik Stepper* Step Bit and plastic case 20 9.1Driver hand pump, Slug-Bustef punches, diesand draw studs for 1/r through r conduit, adapter,spacers, Kwik Steppef Step Bit and plastic case 24 10.9Driver, hand pump, Slug-Bustere punches, diesand draw studs for 1/2' through 2" and 2-1/2"through 4" standard conduit size punches, dies anddraw studs, adapter, spacers, Kwik Steppef StepBit and steel case 54 24.5Metric - Driver. Slug-Bustef PO punches, diesand draw studs for 15.2 mm through 60.0 mm,adapter, spacers, Kwik Steppef Step Bitand plastic case 24 10.9Driver, hand pump, Slug-Buster punches and drawstuds for 1/2" through 3" and 4' conduit, adapter.spacers, 1(wik Stepper Step Bit and steel case 48 21.8
4,2
V
-•_136*....i•L_1.�036..· ·-14
Punch
Punch Unit Replcement Partsfp-. *.'r--- 7238SB01:: 7»St=4t..'..1.-. 0•id»1.1 1/2"-2" Conduit Size MINCI INNIL", "I SIZE CAPACITY REMACE'EMT RE......
PlINCX •.... $.10 CONDIET. lillI-«. Slug-Buster®
mSTEEl WBGHT 11/PLACE]iNMTM/:01 RE,LACe ENT 011 ORAI STUD IALL SEA: DIO KICAll ilm == ..I ..1 �036=ami"l . Cal- == CAL= .�036la�036'la"la �036,=.".,
:....... i Knockout Punch Kit *1/#/lk# 1•240• I:bre #93 #509 Al L = 16 1,4 1•. i*t illmAY &*9%: ·imm 94135 ,16• _R# gidZ le•r..1•6 . i 730·916 02433 9/18 0.563 143 -- 16 1.5 .1 46 1754AV 04230 1753*¥ 04229 167SAV 04218
4'elifirilis -l--3 '#71©••9 11*1115 -•1•·••15.42 098 34 * = 14 2,0 ..3 '137 21116. 21316. :2302 321102 0•0*2 •00#2 •&&%A F,M73058 02409 5/8 WS 119 -- 16 1.5 -2 91 1741 04223 174.W 04224 1675. ..8
t--- :-.-irr·, 1-,".:215* 6,---' 4..8 , 15192 35192 - ' .-- 0638 16.2 2 18 11 2.0 -3 .Jit Jp·)1 3:193 35162 3462 000«' 00042 ' .KA • .t
13%147308:•11'18 25340 11/16 0688 17.5 - - 14 20 -3 137 175217 04228 1751Alt 04227 00042 00042lm&,86 18,85 &-·- ·-2 0•73: 1,6 11 -1 3*.''B •,il<1••••7t*1 II<194• )#An 32003 '00042"'.00012 �042·.6,73085 14 20667 3/4 0,750 181 - - 14 20 .3 137 113,W 03998 114.AV 03999 00042 00042*1«*4 ll:Ii.*6 68 «.463 *4_ i# ia .a ·ii X1 3%ti 31• 5*46 1*4. '3*H' 3.*11 ma frir 9,•'
73088.13/16 20668 1176 0812 205 - - 14 10 .3 137 1745AV 04226 174.V 04225 00042 Col>12
7235BBI.Mi=f I:Mal i¥i, A•11 14 3 F jI 3# K*mNE=E2ieR lei,1 3« .a ./1/873088-1 20670 1 1000 25 4 - 25 14 10 .5 227 87AY 03986 35164 35164 00042 00042•*0*1381 *1• 1•il• 5* I #A * e 1111# .774 11194'1:Im*t ImiN'llel *# larma *14.
6 273 91*/ 03290 92*V 03991 00042 00042'12,»...., 1 'E. 1/2"- 1-1/4" Conduit 7//7*/1/.rMM/Ma//m"4It-TE-•;•-ry-·,·, -7 318 117/ 04002 11:AY 04003
Size Slug-Buster®00042 00042
.7 315 ;74;All .66337 ii#' 09586 -'00• .#*IR "-5544*6.Knockout Punch Kit 1.1 499 32CSAW 04734 3208.W 04735 24&WN 04040
!.2 3• .$:,Alt 61,36 ;204, 070,4 2,9,A,#8 01044 1•i•&: 1»J'l1.4 636 1794·11 04251 1793AV 04250 249Al= 04040
./.- a•...I-,-"'.£, 23 631 _18,w 0,257 1815A·,1 0486 249=88 610« •i•9.-i •:·=·1 9 862 1791/ 04248 1792117 04249 3044.88 04042-"4 fl; 2 6 1,83 '.437&1' 01(JO 'b:A/ 040• 3041•158 0104; =='T 13%113 1361 1758• 04234 1757AY 04233 304AVSB 04042
53 2324 .IRSW W,252 1795.W 06997 .1434AW 04188 1432·98 •04187U 2178 17304 04247 1789AV 04246 143·Ur 04188 1433A:88 04187A litH •i& mg- 11*i#*744 1®*ma 4442112:ES WES,
7237BB04175 143003 04177 1434// 04188 1433*.In
r-�0367 .7 1 1 /# 'NOMP #1•11 11*11. Ht#1 1-# : •..06363 1797/ 06362 1434;01 041881433Ave•,09 4 /F--1 1-1/2" and 2"
2 .'t' . '1:5305 '1204 18:0 ,143*:V 0•1i8 f•A• i .104180 143. 04183 1434.r'
--- 1_ " /' • 3 -3#BR..•Sti• 34,8, . T ':
l
29814 04652 3026AV1 . ii " ·' ' -�042ip.&38#. 6*654. jsy, :- -,
21491 21491 302SAY•in, Ki,(*Ab-,T0i•9 Knockout Punch Kit
e
.** 1.R.
:•7Avol 04686 Replacemert Bushing for 3-lir (conolitwe size) and larger punches with maant operation'
«91 .... --» .1J
7646
1*-t'�036=«.»»'»r*API»••' =»«.. =«�036"«.. =. ./ I. - ..» ....•..&... ..... ......... ..»-
164 Jobsite Supply
Al 1•1 =1{D 9
73038.14/8 20671 1-LIB 1.125 286 - - 14 107253*71- = 3;flim: Ima *t' S 2 36 •D73088-1-1/4 20673 14/4 1250 31.8 - - 16 137'..r£.1-916 Z5344'. - - -. 1*,6 .En# AS, Dz ·-.1. 1173088·1-3/8 2/27 14/3137314•-- 103.5ir£31.1,2- :�036ii*• liiN 1,FBO •1 9 6 'to, a73005·1·518 25349 1-51 juS 41.3-- 10 35
.n"nAAN 0350 . 41. lis·•94 •A ) Er -10 3.5730*1-7/8 25351 1·7/8 1.875 47.6 - - 10 15imeRIUm 4 *'·# 2-266 'il.2 * 9 T• iS7300•2·1' 20679 2·112 1500 615-63 10 151*1**S* 0@7( ••6 2.41 2.,B i« -- 10 -,373028-2-3/4 25161 214 2750 69.0 - - 10 357-.'�04258•·· . 25183 . ... - ijit 70.4 G 2 ilE *11738BB 19975 2·1,7 2.7/8 2914 74.0 - -:•3-3 25372 · r ; 1 3 3000 56* 6--730TSS 25403 3418 3125 79 4 - -7/T23( 18635 .-. i - 1228 829 4 7 173988 19976 r 3-1/2 1539 89 9 --m##im/// 1#34 *10 *i & 6' .741Er 1077 3-1.·/ 4 4.044 1027 - -74-1,'. ·- 19,78 . 4'··· 616 4514 lisi 'p _ ,73088-127 21519 - 4.724 120.0 - -74:58·• "' 1•3 ·5'.•· B WS ///'':-'i
�042CAING UPC NO. DESCRIPTION
10 3.5 5 2268 1429/10 3.5 8 1 276 82 AV10 35 6 2722 1798AV
-0 35 6 3 281 �03630510 3.5 59 2577 1431*V36 4 U * -1 *65.10 3.5 10 4536 2982AV 0465310 35 14 72 29841, 045-10 15 13 5597 21489 21489D f* 11 1*B MIX"R
04187'111100418724181
D4188 14329 04 87143*88 041:t
04879 3036&88 04685046-9 303-AVBB 0,68504679 3036AySB 0468561/#.So'14*N#d
t. t» t "»,i,t- .-»'.... :, . I. ... ...............'.'.........I..=«..==.........» t., .. ..•I...
.I:•Ck·.Jobsitd:SOpplyCo.
T.•1:!35(619)129,5•6100 Pho'ne --44.-..c•.Lt: --'.(61'9)• 208-8560• F.•·.• '.«it,;
' ./ -t'-,- 3.::·'.••t!U"·'hI·' i. ' ". .61'• • •' ./-1�042ZZ:....2'·'Il.t·•2•1...•�042L:.62•·--#.· w-·.--.2�042,-.'
•1au; - Quick-Draw® Kita"r..7 -i:i•'•0.1 ./ M -m,�0421:: --.. .. 1
I m q k' ... I • _ i
«90-- ·- - l:
ililitiztllitil••i:fi:Id/AM,Mia'.0Illillilililli•.
7806SB Quick Draw Kit
7906SB Quick Draw 90 Kit
1906SB
.....
-·.: 7-4 .FY
-· rl .62=i.:-·-·,-...4--:;.1 2 .1,
HOLEMAWNG
The Quick Draw®, Quick Draw 90 ®
and Quick Draw® Flex feature:�042Compact, lightweight design
for portability and fast, easy
one-person operation.
�042Develops 8 tons of hydraulic
force for easy punching,
even in 10-gauge stainless
steel depending on individual
punch capacities.
�042Quick Draw® is perfect for fast,
straight-on front panel punching.�042Quick Draw 90®'s right angle
driver head rotates over 180
degrees for maximum flexibility in
tight working areas.�042Can be used with non-round
punches within the capacity of the
tool (adapter may me required).
7706 Flex Driver
Slug-Buster® Ratchet PunchDriver Kits
,rt:...•·Pa.;f:.. f•
'•1,........'.'.,I"'ll""I'l///:/:///Ill'll'll/"Illil//1//
9.*
�042Timesaving ball bearing
head punches faster than
wrench method.
�042Requiresless than half the force
of conventional ratchet drivers.
i ' �042Punchesup through 10 gauge
(3.5 mm) mild steel with Greenlee®• Standard and Slug-Buster®
punches; and 16 gauge (1.5 mm)
stainless steel with Greenlee
Slug-Splittere punches.
�042Ratchetaction allows for use in
confined areas.
�042Uniquedesign eliminates stud
rotation during punching - lowers
the strain on studs.
�042Steelcarrying case.
CAT. NO. UPC NO. DESCRIPTION LBS. kg.
i.1 •04 . : 30216 Basic High Leverage Ratchet Driver with fourdraw studs and case 14 6.4
1906SB , 34357 High Leverage Ratchet Driver with 1/2":,-1 - :1 through 2" Sit,g-Bustef conduit size punches,
dies, draw studs and case.':1.._i 20 9.1
/+9-k'r.r ."C . vt
..k.· -t, D.
t• Greenlee - -..,I'•-8.12.'.: :
WEIGHTCAT. NO. UPC NO. DESCRIPTION LBS. kg.770458 10475 Quick Drat Rex Driver, 2 draw studs, 12.1 5.5
1 adapters, 1 spacer and case: 770658 10476 Standard - Quick Draw* Flex Driver. 1/2"through 17.3 7.9
2' Slug Buster conduit size punches and dies2 draw studs, 1 adapter, 1 spacer and case
7804SB 34292 Quick Drawe Driver, 2 draw studs, 1 adapter, 10 4.51 spacer and case
1"'"'• 1 3429' •t:'•ttefa:Z••:Z:1ve•1•••••'2" " 6.42 draw studs, 1 adapter. 1 spacer and case
7804E 34291 Metric - Quick Draw" Driver. 2 draw studs, 9.4 4.3k 1 adapter, 1 spacer and case
: 7804ESB' 35611 Metric - Quick Draw" Driver, Slug-Buster* Pg 10.3 4.7punches and dies 15.2 mm through 30.5 mm,2 draw studs, 1 adapter, 1 spacer and case
78041SO: 35614 Metric - Quick Draw* Driver, Slug-Buster* 11A 5.2ISO punches and dies 162 mm through 40.5 mm,2 draw studs, 1 adapter, 1 spacer and case
790458 1 33794 Quick Draw 90* Driver, 2 draw studs, 10 4.51 adapter, 1 spacer and case
790658 ' 34300 Quick Draw 90* Driver, 1/2" through 2' Slug- 14 6.4BusterD conduit size punches and dies, drawstuds, 1 adapter, 1 spacer and case
7004E' 1 34299 Metric - Quick Draw 90' Driver, 2 draw studs, 11 5.01 adapter, 1 spacer and case
'7904ESBI 35615 Metric - Quick Draw 90* Driver, Slug-Buster�042 11 5.0Pg punches and dies 15.2 mm through 30.5 mm,2 draw studs, 1 adapter, 1 spacer and case
' 79041SO f 35616 Metric - Quick Draw 90* Driver, Slug-Buster® 122 ' 5.5ISO punches and dies 16.2 mm through 40.5 mm,2 draw studs. 1 adapter. 1 spacer and case
A* Metal Stud Punches
..".. ,-.-_-h ..'.'i" �042Punch up through 20 gauge1 ..,- .... :, (0.9 mm) steel studs in one stroke.'• ...1 .....t �042Aluminumhead provides strength
-:- with minimum weight, reducing*9//IN/0,-:..:-.---: 112022200 operator fatigue.
�042Contouredhandle design gives
Specifications: better operator leverage and
�042Capacity makes it possible to punch in709 - 1-5/8" (41.3 mm) and wider tight places.
studs. �042Automaticallycenters holes on20 gauge (0.9 mm) steel studs. standard studs.
710 - 2-1/2" (63.4 mm) and wider �042Conversionkit available to
studs. upgrade early models from 2420 gauge (0.9 mm) steel studs. gauge to 20 gauge maximum
capacity.
CAT. NO. UPC NO. DESCRIPTION
709.38 22280
710 · : 21285
30968 30968
I ..... .; ·121AV... 04006
22286''I 22286
24823 , 24823
21297. 21297
Jobsite Supply
LBS. kg
7/8" (22.2 mm) Diameter Stud Punch 7 3.2
1-11/32' (34.1 mm) Diameter Stud Punch 7.5 3.5
Conversion Kit - Upgrades early model·709 or710 from 24 to 20 gauge maximum capacity
Punch for 709 - Accessory
Die for 709-Accessory
Punch for 710 - Accessory
Die for 710 -Accessory
..'f 4. ...... :1
' '*
h
:3•9.•3.•..... I.
/445/14
J/
4,
fIA M '13 {3 5
Ih:( f=i '1.-= = 1
%,m:•eg'
:.. 't:t'"i«=.=*i
165
........ ... /4/ . i*fi......
." · mi'O.. • ' "•:s''·'il•·•·I:'. -
"·i), .2.i Greenl•e »""11 -•
·'5&2 -•1- *le/!i•. I...•11/VELl ... 'A..
166
(-7555R "•. . _i-1.'..-# ./-
'"11.·-=:. //:.15 ... -\
4%•...C/,-..Y
":•1'Ilf ·= i i1 ,.: 1 i.,- .../
,-1 5 \ iill. Al.1 2-,
Aliht. 6.illi I"fl/P.•&#<f7 *7-••7.•D..' :'01"., Mpi ¥ - . 1
*=' :.1 -tfu.L#'�042ts»'
j.
PVC Bending Selection Guide
-*..
."1#•.
T.849 PVC Heater
PVC Heating
-erit j. f. -:11.·:.ire lid-:, ···---F .S,3.:--9 -... . 2
.• • C•l
, , & 9,1...." :-0,1 ..- . '5. : .,6.A Jobsite-Supply Coi -•35:
I: .·'' .-"«2':• ·.-• J•(619)'295:1.6100 Phone '• ,...:....
......., . ...... .,3. 352'X:1•- t (619) 2954300 Fax
-st -·-1 .,-··..,_:3.:•1.•.:.1-�036.I.._i,-..._1·.-•..,·lz•,-2=.--i-:.....•. . .... .... l..
Deluxe Electric Conduit Bender
1/2"- 2" Conduit and Pipe
�042555® Deluxe Series features
unique electrical controls that
reduce the in-rush current to
the relays to minimize the
contact arcing for longer life,
heavy-duty urethane filled
puncture-proof pneumatic tires
and UL/ULC approved.
�042Availablein four models for Rigid,
EMT or IMC conduit, or bender only
without shoes.
�042Theoptional PVC-coated rigid
conduit shoe group can be used on
all 555® series benders.
. ' r..· -r-...· . '�0421:...&:;. ...'-I.%%. "�042�042<--·.
/ tri-S. - -t.
BENDMG
CAT. NO. UPC NO. DESCRIPTION
555'·.•" 39780555R- 23446
555E
5551
555-22
37279
+4. 4-r ..:1
L4 /. 3./-"
, 1. ..» -61, p.c-
847/848
PVC Heater with optional Roller
Support and PVC Plug
CAT. NO.-DESCRIPTION PAGE NO. 1/2" 3/4"
1860-1-1/2 PVC Heating.Branket,·" 20::",•.,; ·-'./ "1·•I,»•.¢'.....-... *I.- ....."... * ./ I. I I -860-3 PVC Heating Blanket 20
['680-4 PF Hea•ng•i•k#t·'-�036_3:,.·2•• · -, -'
849 PVC Heater 21 4 4.---- .-I-,- .--- �036.-.... - .i.851-fY-(Petet ··L'11·'1"· .2.'_921 .'.' 4 - ..4.
847 / 848 PVC Heater 21 4 4
PVC Heating Blankets for up to
4", ALL schedules
�042Makebends, offsets or saddles in
PVC fast and easy.
�042Easyto use: wrap blanket around
PVC, secure with hook and loop
strap. Built-in stiffeners help keep
the blanket tight to the PVC surface.
Remove blanket and form bend
by hand.
�042Controlled,even heating for
uniform bending.
�042Heavy-dutycord and thermostat
for long life.
�042Temperatureover 300° F (149°Q.
27989
27990
39971
37279
Deluxe Bectric Bender power unit without bending accessories
Deluxe Electric Bender with Shoe Group for 1/2" through 2"
Rigid and 1/2" through 1 -1/4" IMC conduit and pipe includes
28007-1/2' - 2" Rigid Shoe Group
Deluxe Bectdc Bender with Shoe Group for 1/2" through
2" EMT conduit indudes 23802 - 1/2" - 2" EMT Shoe Group
Deluxe Bectric Bender with Shoe Group for 1-1/2" through
2" IMC conduit includes 26330- 1-1/2' - 2" IMC Shoe Group
220 VAC 50/60 Cyde Electric Bender power unit without
bending accessories
40 Mil PVC Coated Rigid 1 /2" - 2" Shoe Group
(sold separately) to use with the 555 series benders
: 7.. .-�036i
ZA. 'Al l.
1--7.... ... -I,I
..I.3 .*.--1
· i
851 PVC Heater
Specifications:
i:·: 'f., :·..... •.·-•·· 860-1-1/2-·-,f:'.:0-'8*3.·', '.-·:..-2'. 860-4-:,:. .-':•..·:
Capacity Upto 1 -1/2'PVC 2"-3"PVC 3-1/2" - 4" PVCAll Schedules All Schedules All Schedules
power.Source :*-•&0\3£5'4.03··fA•iftifoyAC.=r.''r· '• 120VA«·'r. · ''Size 13"x 8-1/4" 30" x 13-1/4" 38" x 16-1/4"
(330.2 x 209.6 mm) (762.0 x 336.6 mm) (965.2 x 412.8 min)
Weight .. '' ' · 1.7 Iba. (:B kg) ' .i' ' <,;3.3 ibs. (1.5 kg);, .. 4.9.lbs.· (2'.Akg)
Wattage 200 800 1300
CAT. NO. UPC NO. DESCRIPTION
860-1 -1/2
:860-3
860-4
Jobsite Supply
31486
31487
31488
PVC Heating Blanket for up to 1 -1/2"
PVC Heating Blanket for 2" - 3"
PVC Heating Blanket for 3-1/2" and 4"
,
.,9. . .
.....4:.......'
WERRel.137 -7 I 1 81 14/4" 1-1/2" 2" 24/2" 3" 34/2" 4" 5" 61
'1 1 4
4 4 '1 'i
<4.4 .4 · :··i :-:'.1•,• ..Ar:.-4 ...41(..4 4 1 4 4 4 4 ·1 4 '1
"
-Ar<.'1·
-I I A'iJobsite:SOpply Co. , ,..
....1•:53·(619):295;61.00 Phone .. ..:'a:-
i:All...I(619) •99.f6300'Fax · ,·St •?,5.M...i.........59,·I·.. e..4..''4•---4•';I.. =._.........._I.-- -·./.-�036.-......',*.
..
-
·:...3-'·S: -/· :rs < ..:- ;i ' 2%4-*..'<' 'I
, •1.. .... tf:.•• • •-•i• •"'•' •I, ··•:· '• ,lkE.�036:
'' ··62'E.•9.--' 'L,..,1 -... CD' 2.-' •-S, ...
'·.-:'.'••71.it'-.1-0..•.- -2 1.- *=--p-_. -•-
FISHING, CABLE PULLING & MATERIAL HANDLING
BX-Armored Coiled Cable Dispenser
�042Dispense armored cable, flexible conduit, Greenfiekl' or NM-B cable fastand easy withouttwists ortangles.
�042Base with adjustable tension control rotates to dispense the cable withoutoverpulling.
�042large pulling eye rotates freely and can be used as a carrying handlewhen the dispenser is empty.
TSize . 39" (990.6 mm)leng-,3-9"-{7&&gpfl).ydde. 311:987.4-mmihigh..2, 4
Capacity Six 2,500' (762 m) spools up to 18" (457.2 m) in diameter.-- --,-r. ··--··ir·•:·:·i�042r,··. -,r.·.'�042. ·- I. ' : ./ :..ir'-215·fi•#eighit·93 i62(42.18 kg) - :t: r, -. .·'r·•:..' ..I·:.:,)...-')& ·'j. I.'•"f :.:. ,-· 1:
&.... ... . ...'....... ...... ... --.---t ..'.'..'.'....�036-'.........�036.........
4'K '.5 /2-
Greenlee,/ .:,-Ii.f . ' E..2 ·
CAT. NO. UPC NO. DESCRIPTION1•§13 . 37218 Armored Cable Dispenser
SPECIRCATIONS
:Size .. 13-1,·2"042.90•Mt,·9•20'(650.4 r.m•ameti:rCapacity One 250' (76.2 m) coil d 14/2. 14/3,12/2 or 12/3 annored cable cr romex.
'GpiShi- SA:i. iti:1 G -
AScrew Type Reel Stands 6-Reel Caddy
•004,16*Ilill#/7 �042Widewelded steel base for added �042Spindlesleeves to facilitate easierstability.
i %·
/
�042Rollerbearings fit in the spindlepay-out of wire.
�042Holdsup to six, 2 500' (762 m)683
•••I and turning freely.w•; groove to keep the spindle in place foot spools of 14,12, or
10 gauge wire.,• �042Twostands and a spindle are , -__ --- 3 -/- i *r,�0424.Folds for easy storage.
687 *' '*• required for a complete set-up. 3 + J .�0422fixed and 2 locking swivel
.2- casters for easy portability.
�042Pinlessdesign eliminates looseCAT. NO. UPC NO. DESCRIPTION parts.
1683 • 15372 Reel Stand 22" - 54" (558.8 - 1372 mm)687 -·. • 17076 Reel Stand 13' - 28" (330.2 - 711.2 mm)
CAT. NO. UPC NO. DESCRIPTION .!684 ..:..4 15375 Spindle for 683 Reel Stand•647 : 15321 Spindle for 687 Reel Stand ',9517,5.:4 01225 6-Reel Caddy:.25591 t..i 25591 Stop Pin (683 - 2; 687 - 1 )13K19-IIi ' 38619 Jackscrew Replacement Unit for 683 or 687
Specifications:Specifications:
-Slzk Ixtli 40-1.45119•_9•1H.igh;. 39'.'.(838.mml•: I.,I.I.i.., .I.."3-: -•• ··-'£Size 683'L'24" x 23" (609.6 x 584.2 mm) base; 54" (1372 mm)matimum height . ;
Capacity Maximum Total Spool Quantity: 6 spools 2500' (762 m) #10 ga wiret-_68-7--13-1/213.20'-13§8-3/50.8-mm) base; 2•11.2.mm) maximum,height'Maximum Total Spool Weight 450 lbs. (204 kg.)Capacity 683 -2,500 Ibs. (1134 kg) each, 46" -/ (1168 x 2438 mm)'reel diameter
687-2,500 Ibs. (1134 kg) each, 28" - 56" (711.2 x 1422 mm) reeldiameter - , Maximum Spool Diameter: 15" (380 mm) • li21., ' : ,-,lr�042'r·'r·•--I - ··•-·F--'I. :
•eight: ,•8#13.91•s.•2-2.k.g),26•2•s. (11.3 kO)..·: ':3'3�036-»,· .4. · S> :Weig•t-·• •60.1b•3••i•9).,,..*'-...• •., ·.•"...';•....'•;•'•._-- -,. .._ .". •-; :3 • ••
:-6%- 1-*---, I • Wire Dispenser ....i../4*# Wire Dispenser
•1%'. ... , ...,-I./.'-I=-•, 1 . *'r
�042Allsteel welded frame with 6 reel:f �042Allwelded steel construction.
» spindles and feeding eye. �042Basehas 2 fixed and 2 sw 36/ �042Angledspindles keep reels in
1.1-LEf-6 '4 --•*P--- �042Thespool rack consists of 10
,# place without locks and help brake w spindles and an adjustable guide, · the reel while paying out.
�042Mobile,2 fixed wheels and one
'4:..i1.Ir loop, and can be turned 360°
-t
:::,A•9-1 'independent of the base.
* '. that swivels and locks, allow easy 76 4•5· �042Spindlesare angled to contain1
.'. movement and control. »f�036"" ••- reels and act asa brake while..... �042Fitsthrough a 30" (762 mm) J .,/ paying out wire.
doorway. '/*'r �042Fitsthrough a 36" (915 mm).%0Se opening.
CAT. NO. UPC NO. DESCRIPTION CAT. NO. UPC NO. DESCRIPTION
i,909 6 22875 Wire Dispenser :910.:' 21982 Wire Dispenser1152284 ' 52284 Swivel Caster (1)i.152235, 52285 Wheel (2) SPECIFICATIONS
i Sizq-1.:63621/41(921.mm) !0-ng, 3,13/2.",(809 mm)yide, 5.9" (1-499.mm)-Digh: <·••SPECIFICATIONS Capacity Ten 2,500' (762 m) spools up to 18" (457.2 mm) in diameter.
•jighp..il#iwow.Wil' •.r '·•'1. *-- '.- -'1"1-. S
I.* -«- I . -,- ...............'» .... I. ... . ./ ... - I , .......'. I. - I -,elI....%..;,t-.l
Jobsite Supply 167
1....- %. I. I-.•«»...»t-»»•«•»....•*»=»,»'...*./.*,1,«»«,t·,
1 .«'. 5 · ...;:.... . ... , ... ,». · '3fe .*07. ...
, • .:; ...• -'· . •7,.':ti·'',.••.t:k..,:.-...-4,•(,•..j. . ;.
'. I...:»3-3. i «, 2 . Greenlee :3. ':f'.,I-.1. . ,;i
' " i.,' --:'• 'IL,44•. . .:,S ): .4<«�042" · ·· '· ----*.f. .=1• .-.,.. -.....1-**6.*•-�042·�042*_•t·�036
.. B.f·· .-:·t' ,41.---.:*, •.- �036•:•ti:. ·.,Alih•JobbiterSupply Co- • 'i-'.·. -
'1 •*3 (619) 295;6100 Phone '.' . .
- '3. . .• :..7.-e,3:2-2 ' . 61. ..:-. ..':...t:•11•.; . (619)- 295,•6300 Fax r .-f....
· '.1t,t-
WIRE & CABLE TERMINATION
,-f/2//•- , c--:4•4 1-,%*lili f,-1.-'- ./&%".........B' f...4/./4./=."1
m./.Al..- -- .4
5.9.-I.T\ 9.-'A
48 ...4
4 *1
• ., "Specifications:
Capacity
45206
0,MaximumFrequent Use
E•agth,.10".(251.m[B)- ....._ ,
45207
iM•ximum ,, -.: •- _
Freqye4iusL ... - .. *, Length,•11" (27.9 mm) ..
Copper
,-_ 600.Bcmil,iMGMKGAQ •nli).*.. ·,·j'*,-500 kcmil (MCM) (240 mm9
: �036.'Jawapfn[ti•i 1 •71:RE13/5-mi•i):-£·2
, 759 kcmilll,S•1609 mt!2).: . .'.. :-600 kcmi• (MCM)j300 mmD
, ' : j*Slop#A#0.2'tBO.#rb)I .' , ib
..«<»0 Ratchet Cable Cutters
f. �042·.-.I .- ...7 ...
///i. .ff
-·........... 91/7//1-/93/1/£•
763 •..5: *rLJ...
�042Highleverage for easter cutting.
�042Antislip mechanism ensures
positive ratcheting.
�042Onehandle stationary while the
other ratchets for use in deep
boxes or against walls.
�042Durable,lightweight fiberglass
handles.
Specifications:
Capacity Copper
763
IN•!llum ... ..4 . .., .....' 500 kcmil (MCM) (240 mmz).3...=�036'.......flielent Use 350 kcmil (MCM) (150 mm2)L.Lengll.6.<3-374"Qilo@L. Wlight..3.81bs. (2.2,1•g) 6 .
764
Mati,Lum . .· •. '. : ..' - ' ' :·750 kcmll (MEM),02Lmmg:.-
Fr#guent Uie 800 konil (MCM)-(240 mm2)rpoili.-19-#di(ta¢)hiI]),2-·' W87417 5,3 lbs. (2,4 kg) ' -·:- ·.
-- ..,...
.*'14...Y•�036�036.9' f
=,2-•3,2.. , f'66-'--:. - 1•il.4.1
•L-718F
Heavy-Duty Cable Cutters
7185 704, 705 and 706:
�042Strong,lightweight fiberglass
handles.
�042Adjustablepivot bolt provides for
blade adjustment.
704,705 and 706:
�042Replaceable,forged, heat treated,
and precision ground blades.
�042Madein USA.
Performance Ratchet Cable Cutters
Both models feature:
�042Simple,one-hand operation.
�042Two-speedratchet mechanism adjusts for light/heavy cutting.
�042Well-suitedfor tight work spaces.
�042Speciallydesigned blade improves cutting capacity.
CAT. NO. UPC NO.
452p6 ·: 45206,·.45207.'t 45207
Aluminum
DESCRIPTION
Performance Ratchet Cable CutterPerformance Ratchet Cable Cutler
.: ·-- 1, 600 kcmil (MCM) (3908109 .:
, , , 50• 101 (MCM),(240 ,%p • •>:.'.1'...0 ... ....... r., t..........
· - 1000.•,IMCM•OPMUD..···.-1•,:k.,
750 kcmil (MCM) (400 mm9
WEIGHTLBS. kg
1.5 .72.4 1.1
Communications Cable
:3' 11-3/8;13•*11) 080•
:.:,Ir,2 2" (50.mm) dia.,-
CAT. NO. UPC NO. DESCRIPTION
763.'...r 05542 Ratchet Cable Cutter, 13-3/4"
764.....:f 35516 Ratchet Cable Cutter, 19-1/8"·36037, 36037 763,764 Cutter Head Unit (2 Blades)
Aluminum
. ' 29s '5!nil (MGM).(490 mmD ._
750 kcmil (MCM) (400 mm9I. & --- - - . .. --
..··•23·795_kct•lil-(MCM-).0ON9J -i'• 750 kcmil (MCM) (40,-0-mm-9
CAT. NO. UPC NO. DESCRIPnON
::718F 550
,:704 -';• 705 .:,;
; 706 ..:
;24565 :,
,2456Zf:26.555 •
:05930
1»2.. •,822296
==»=»= I.'.'==�036=",
Jobsite Supply
10507
24564
05923
22291
24565
24567
06555
05930
22292
22296
1-3/16" dia. =
,.'. 1-3/16" dia..·". , ,·1:
Heavy-Duty Cable Cutter
Heag-Duty Cable Cutter
Heavy-Duty Cable Cutler
Heavy-Duty Cable attter
704 Cutter Unit (Indudes 2 Blades)
704 Handle Unit Oncludes Handle, Sleeve, Grip)
705 Cutter Unit Oncludes 2 Blades)
705 Handle Unit (Includes Handle, Sleeve, Grip)
706 Cutler Unit (Includes 2 Blades)
706 Handle Unit (Includes Handle, Sleeve, Grip)
1...1 ,,..
764
al,fal132 /6,er
:18 Communications Cable
.,
'7,.2-44
1 "..*'.:
168
i»,«•»»»,·,-.-9•-#.1•t=»I.»I./.%--'-»'««•I•'•-«-»»•«*»'•»»�036.....t,1�036==»�036=»-,=«�036'»1'.=»»1"=t=.e. �036==»-==�036==«='..==*=�036==
I'l'�042,6. :.''i•thtdo#bite)Supp/y Co; ',1.,- 5.... » ..<-. ••: 3,1'.: 9':.
'Y�042•19)',295*f•• Photte ' -'A- ),). ...S ..�036'..,j..%,•..fi .,i... , •
4•<.49 4619) 295•6300.Fak. "" .".128'.,7.ti' .' , .U#•RAW.;#AY... 1• '- ,2 :
�036··•. ···--:•,:%.:' '·.•fif.. ., Li.,• . . .....•.... • �036.2,.. IP:;•.0.Ii. ..., ,<. .. .... C•I.).•. ' •·-..2:91.-*,<1*.*. ·.44#6:61·'..e·'1.,...a.-,1 L-*..-*- ....... * .4·;.... .J.L - · ··.24..*.•Z..:>•_-/·r. .-.--4- ·1 ·i
-..:.
,--
/•//9..·t'.·'·.':• .'K' f'sK
-,2 ."tilf...I....'. , -1,0 :,4-Greenlee :.:.... ...'. .':.�036.St.•..'.2.: .....,13
TESTING & MEASUREMENT
-• Touchless AC Voltage Indicator
�042BrightLED and audible alarm if
74£*61.r voltage is present....:•51«2.«'.: �042Fast,easy, noncontact voltage
, -3,•...•4'..-I detection.
�042Adjustablesensitivity.
�042Identifieshot and neutral
conductors.
�042Checksindividual breakers..
�042Accessoriesincluded:
(1) 9V battery, carry case.
AC/DC Clamp-On Current Adaptor
· INI
i...·.. " E-, f»llillillill*:1/: . 'I
'mili
12..... . I fill":Ir. -•-4 -i/. I.-- vi i.....'
10/• .., 1/ /4.,0
Digital Multimeter
e.-0
04®.LISIED
C �254:1•
e-
�042AC/DC current measuring accessory.�042Measure up to 600 amps.�042Perfect forany multimeterthat reads AC and DC millivolts.
CAI NO. UPC NO. DESCRIPnON
i Cl.1-60 ; 07531 AC/DC aamp-on Current Adapter1 CMA-60-C, 07606* AC/DC Clamp-on Current Adapter·WI#WIt,29#c,tt,35a,
SPECIFICATIONS
' 87prrage M.•surEmint _0 6[[14Voltage Output 100 amp range - 10mVoutput per 1 amp k,put
600 amp range - 1 mV output per 1 amp Input.Jawjpeping �0361.33' 05 mm)Measurement Category Cat 111,300V; Cat 11,600V per UL 31114
DM-800 features�042Autoranging, 3-5/6-digit 5000-count display for greater accuracy.�042Frequency and capacltance measurements plus diode and continuity tests
· standard.. �042Datahold tocaphre measurements.
. �042RS-232 capable, may be connected to a PCfor extended measurement2 ', capability wib optional optically-isolated interface DMSC-86 purchased
separately.; �042low ohm Ange calibraaon. subtracts test lead resistance.1 �042Backlit display for easy Wewing.
DM-810 also features:1:. �042True RMS forDo-compromise accutag
, DM-820 also features) , �042Record mai mI(i. and max.min readings." �042Crest capture (5ms peak hold) max, min, and max-min readings.1 �042Relatlve oitdisplay,mode to see relative changes in measurements
A, �042.Temperatummeasurementsmndard,7 Accessories Included: (1) 9V battery, canying case (DM-820, DM-810),
• :. , bead tem••weprobe •M-820 4.400'F/204'C maN. te• leads
.,i CAT. NO UPC NO., D' .J/ 07551[" 3.7 C 07618*1.18 JIn | 07550
1[·111 r-Z . 0761rfo'; u I 07549| r .1 I-10-, - ; 07616• ·
ITI; - 07535�042#./*'=.Ci=,5=
DESCRIFTIONDigital MultimeterDigital MilmmeterDigit31 MdvmeterDiglet MulumettrDigital MultimeterDigital MutimeterCarry Case Onduded)
SPECIFICATIONSLlottage Measurrment 50.00,500 01.5 000 SO 00,500 0. 1CJW_ ,Amperage Measurement 500.0,50001IA; 50.00,500.OmA; 5.000,10.00A
•Re:i:tanw 50 00,503 3(1; 5.020.50 00.500.Okil· 5.001 ' .'50 OC#.111
Capacitance 50.00,500.OnF; 5.000,50.00,500.0,999*
•SL.-...�036_.F.191Ee'U._..1.-.-Z.':11/1-.-3Temperabra Ktype.489 10183rF(-50'Ct, 1000"Cl8*-4*44--Ge-eWm883T----7
: Catm, 106'39:- 1.31114& ..........,...........-.. .... -.. ....... ..... --.--...-... .J
CAT. NO.
62010 -"·3: ·
'TC-15·,· r
Specifications:
UPC NO.
34470
07595
DESCRIPTION
Touchless AC Voltage IndicatorCarry Case (Included)
;Ve[Rge-Measurement.··.iAC.V.Mil990; ·-·' Fidquidg,f59-5991k•Y..:'/ ': ·: .1Measurement Category Cat III, 1000V per UL 3111-1
A- I/':;•.93:64:$4*.
M=-Iti,b, ..'==
1.-
61-035 E-Z Check
Circuit Tester
61-051 E-Z Check Plus GFCI
Circuit Tester
61-500 Receptacle Tester
61-501 GFI Receptacle Tester
�042Tough,impact resistant case.
�042Premiumneon lamps.
�042Noslip ergonomic design for
maximum comfort.
�042Foruse on 125V circuits.�0425year warranty.
Power Finder Circuit Seeker M Microprocessor-Based Circuit Tracer
i•"Im.'•i.trim•.11.---1•'22. Sh.*4-5-'=- 5m....iilili-I
1=r2·818•1III;.6*glIWMP.
--.11../livial
Jobsite Supply
Features:�042Traces concealed wking, locates junction boxes, and finds breakers for
Ove or dead circuits--no need for power interruption�042linds breaks in wires and shotts to ground.�042Incorporates auto gain Circuitry for enhanced accuracy.�042Locates and identifies blown fuses�042Supports transmitter-to-receiver distances up to 4 miles (6.5 km)
for dosed circuit tlacing.�042Accessories induded: Adapter lead, (2) 9\1 batteries, AC blades, instruction
video, extension leads, carrying case, ear•tone/tube
CAT. N• UPC NO. DESCRIPTION
3•*% 00521 Power Finder Citcult Seeker- atcult Tracer,»•*00523 11=mitter005•Bt 00•4 Rd*t.:'ll:'0**FS«• 00520 Carrying Cas,./ .1 Adapter 1207 Female Receptacle with Clip28929'i•- 36929 Receptaae Bmdes 0,AC-#*i• 00•2 Test Lead Extension
W015/ = Ear Plicne/Tube»'.,1,%•••• 00824 Ins#imtion Video, MA-2858
SPECIFICATIONS
'C,#aclly_1!-!P62'·1 'QPE-- --- -,-- -- . 1Auto Ott Transmitter 30 min.; Receiver selectableCES: Size 14" 1 12* 1 4•(355 11;m x 305 Ir," x 102 mm) JWeight 3.56 ts. (1618 0Dis•Q: .-309311*4/468//8-/__•_77
-''I
=lk,
&2(13
dr
.*-»»«.•t•»,».•1.•1
169
-2 . 44). 4. I. 3 44:0-F • •-- .. - ,«. - :......t•' I
...7:11.. -. W . ... . . . •,•4,3'''3' s Greeiilee ' 9&7.91' 6»m t... . ... ..... .
.:•.•... . • i' -<)591.:.-;.·.-RL-.1 -.2',1- -211-
'4 -.....'-*e•75,2
..•- .Al/' 1/14*:tfi•lliwill/..Allir*Ac,vi•=. .i'Vilf
.*= ./.I• - \e P.i•.2.7.' ••V
a W
Feeding Sheeves
Rope Clevis
Set Screw Clamp Pulling Grips
4 .., .i...:41"ii-'16 Jobsi«Suppw CO. 0.&I.' · ..1•.,,3.(619) '295*100 Phone,
," -- -3.9.,·7At'il:.. •.";(619).295.:•i300 Fax ' ··i. .4 , . '· .':- :i.'.,·: 4'·.4 / - ':1., ..i ta
46"/ �042.·-i T ·· -7- .... ··. ·-· i r.**· L../....w.... .
Super Tugger® Cable Puller: 6500 lb. (28.9 kN) rated
�042Pullup to 6,500 lbs. (28.9 kN) �042Heattreated steel sen'ated
with less than 27 lbs. (120 N) of gripper feet for secure mounting to
operator effort. conduit
�042Uniquefloor mounting attachment �042ForceGauge included to
for quick, reliable setup. constantly monitor the pull.
�042Leaftype mounting chains won't �042Rightangle sheave allows operator
twist when tightening. to stand out of the direct line of force.
--4'- .
C....•
i-•ITT--, ' 1-1;38--
13/lilr, -5.i='.
SPECIFICATIONS•Rit«CapdfltySt ·e121:':I Kt T.$19.Bel.,w Sgint';«tig•f5•40!il•.1Weight 441-2-9 lbs. (4.5 kg) 441-3-1/2- 17 lbs, (7.7 kg)
441-2-1/2 -11 lb& (5 kg) 4414 -19 Ibl (8.6 kg)441-3 - 14 lbs. {6.4 kg) 441.5 - 261bs. (11.8 kg)
4'- h'· :�036IC·"7,For #94 0,0 '10
! r 3.....4.'.. 35•- . 'A
578 •- -'-'- 4...,r-\
4/ 0,7, 3: -
579 '-
2 -1//115.T/m.i./8.7..I,3.. :.,
678 · . ·· · -, · •':
0 7 t?
11*,:·1 .
.*.
), , FOrk"am Ft:
0.'..
624L1/*4/,•13 9'.,.11.
j../r li
FFV' l.1.%•Fil••Each glip has tso Opposed Set screns elat Fdde posievelocking. 000# 11 wirB oltp stnid be 50161Wed wim *lietoassure:Ilp·proof gr#
�042Audioalarm high force warning
and circuit breaker shut off at
maximum force for added safety.
�042Taperedcapstan and patented
rope guidance system for better
control of the rope when feeding
onto tile capstan. �042Patented.
�042Yoke frame slides into the end of conduit and holds sheave, allowingthe cable being fed into the conduit to smoothly roll over the sheave.
�0425" (127 min) wide aluminum alloy sheave with self-lubricatingbearings.
�042Split tube for easy removal after cable Is Installed.�042See the Capacity Table (below)
CAT. NO.:441-2 1|'4412-1/2 i;441·3 "t|441-3-1/2 1•4414 •
1441·5 1:. _ 1.=* #.. I
DESCRIPTIONFeeding Sheave for 2' conduit ·Feeding Sheave for 2-la' conduitFeeding Sheave for 3' conduitFeeding Sheave for 3-1/2' conduitFeeding Sheave for 4' conduitFeeding Sheave for 5' Conduit
�042Removable bolt and rope sheave.�042Removable grip eye bolt�042Select the de\Is with a rating that meets or exceeds the cable puttefs
maximum pulling force.�042Removable sheave for rope eye.
CAT. NO UPCNG OESCRIPTION"7*4. 31910 Rope aevis"-le"¤79•1-1 31905 Rope amis"imil" 19524 Rope aevls
· Maximum Rated Capacity Weight' ·· •· •578- 6,500 lbs. (28.9 kll) · ' • . 578 -0.9 Ibs. (408 0 1579 -10,000 lbs. (44.4 kN) 579 - '13 lbs. (589 0 . 2678 - 6.500 lbs. (28.9 k19 670 - 1.3 lbs. (589) · ' ' ''' 1
NOTE Rope Is 8 Very al•cal ink Inthecable polling Eystem. See pages 102 & 103 lorsroperBung rope Belecuorl
�042Use to pull In 2" (50.8 mm) or larger conduit�042Type of pulls: heavy, long runs.�042Type of grip: Flexible eye 1/4' (6.4 mm) diameter galvanlzed steel aircraft
cable connected to 2 cable receptades with 5/8' (15.9 mm) diameteropening and 2 damping set screws.
�042Select pulling grips with a maximum rated capacity that meets or exceedsf the cable puller's maximum pulling force.
Jobsite Supply
CAT. NO. UPCNO. DECRIPTION:629 ·, 31855 Pulling Grip with Cley# indudes 6245,624L and 678
devis - 4 damp:624 i 31908 Pulting Grip includes 6243 and 624L - 2 damp eachi624S I 31866 Short Pumng Grip - 2 damp:624L 1 31867 Long Pulling Grip- 2 damp152352 .! 52352 Grip Set Screw (2 per damp). 629 and 624 - 8 for each grip
• 624L and 624S- 4 for each grip15.1-2Qi.... 51208 Grip Allen Wrench
SPECIFICATIONSMaximum Rated Capacity
629 - 6,500 lbs. (28.9 kN)624 - 6,500 lbs. (23.9 kN)6245- 3,250 lbs. ( 14.5 kN)
- -624L - 3,2•tbs,(14.5*_
UPC NO.301833035830188303633034730193
Weight. 629 - 5 It,s. (2.3 k0 ·.
6245 - 2 lbs. (.9 kg)624 -3.5 lbs. (1.5 kg) .
•., 62#L - 2.1.,Ips,0 kg)- .
. ..-"u'. ........ '71. Y.
)4 '' I - 'I .1'6:'..• ''. '....•1'.,7 . ., .1 .:i:f.... 07 -...22», -12:1... 261-u=•LA<·-· '·.-c•....'.....
/'..
.1-.4.:, .. i
'.9..:.*.•.•170
SPECIFICAnONS
.=�036«'1»..+I».......,--I...----f.-•-1»,«='./--/.--.««'S=,=.1-' '..�036�036=......I--'---'.......
EF .7.... -:. k.. 4..�036
'5.
• . 1. iht?Jobsite'Sbpilly Co. --.3 •t, "G. f., -'·»'I63:(619)•295•5100 Phone "- 9,·.' = ': 1.
r ''lf S•, " 1819) 26538•88 Fax •. 641'?1 ·- ,. •,•..9:•:, I
t.-fitil•Lt ili5•L .-.-•f,u.-.1. •:fl.:-ZI·il-t:I-PIPE TOOLS - WRENCHES
Aluminum Handle Straight Pipe Wrench
Import Pipe Wrench �042Dropforged steel jaws, Hardened and Tempered. �042Heavyduty enamel finish.
�042Accuratelymachined jaws and adjustment nut. �042Malleablehandles.
: StockNo.-'.---I
01-308
01-310.. ...K01-ST4
1 01-318 ,
912ai•-2•1:33gi
..,-- .---�036.-D:'.5.!•on-... . .....3 .1•08' ·Pipe Wrench, Heavy Duty Pattern / |S• C Ot'•7[BG,im (B" (E•2ilia ·
10• Pipe Wrench. Heavy Duty pattern -7•·. • f <51 ]IM"/04
1•4-"PI&j#•&ch,••)ed#&.•-Paoem .. i.. 2. ··1118fl1ia / - r. ) I
...=..18:.Ple..•5•'-HM.D'.D•atteri•1._, .3 ---1.- )-\•
•4' Eipi Wrfnch.jkavy Duly-Eattem
3-6,1?111' Wteneh,1.le'•*• piti•0·1_. ·.
Ridgid
3'=1(2222,)
.2...9. ;
a j.. ..... ':.. : .......lt:.rAS..........1.�036. ....i:,
2.: t· -*A- ';.Ii ,·--.- .li..
Straight Pipe Wrench
ie.
--=21Description
S ralght Pipe WrenchS ralght Pipe WrenchS might Pipe WrenchS raight Pipe WrenchS.raight Pipe WrenchS ralght Pipe WrenchS ralght Pipe WrenchS ralght Pipe WrenchS raight Pipe WrenchS ralght Pipe Wrench
Description In I mm810CP Aluminum Straight Pipe Wrench 10 | 250814CP Aluminum Straight Pipe Wrench 14 1 350818CP Aluminum Straight Pipe Wrench 18 • 450
*With speciallaws for coated pipe.
Heavy-Duty Offset Pipe Wrench Aluminum Handle Offset Pipe Wrench
i.I•
Catalog Model Nom. Size Pipe CapacityInlmm Na. No. Description In. mm 1
14 | 350 31120 14 Aluminum Offset Pipe Wrench 14 35018 450 31125 18 Aluminum Offset Pipe Wrench 18 450 El i:21/2 6524 600 31130 24 Aluminum Offset Pipe Wrench 24 600 80
Chain Wrench Strap Wrench
,,
Actual 0.0. · Crain 1 Handle st.p st·OpCapacity Lei gth Weight Std. Catalog Model__-Length Ler gth W dth We ght_ Std.. mm In. .m lb. Ng Pack No No In. mm in mm mm 16Z--kg Pack4 100 15'/4 390 0• 1 1 11/, 300 17 425 12 0,5 15 125 14 460 12 1 2 11% 300 17 425 30 0,8 15 125 20 /4 500 2J 1 2 11/4 300 30 760 30 4 0.8 16 125 20 f 600 3.7 1 2 11/4 300 24 600 30 0.8 1
Ta 185 29 725 7,1 1 2P�0421141% 300 17 425 27 0,8 15 18 450 29 & 750 4S 0.9 1S 18 450 48 1200 45 0.9 1SP�042 18 450 291/ 750 45 1.0 1
=='- «»- 1- --- -�036�036».»e»�036�036=--- ... - .t»»�036.=»�036-»-
Jobsite Supply 171
Catalog ModelNo. No.
Nom. Size Pipe Capacity
In. mm in. mmCatalog Model
No. No. DescriptionNorr. Size Pipe CapacityIn. mm In. mm
31090 810 Aluminum Straight Pipe Wrench 16 250 11/2 4047057 812 Aluminum Straight Pipe Wrench 12 300 2 5031095 814 Aluminum Straight Pipe Wrench 14 350 2 5031100 818 Aluminum Straight Pipe Wrench 18 450 2/2 6531105 824 Aluminum Straight Pipe Wrench 24 600 3 8031110 836 Aluminum Straight Pipe Wrench 36 900 5 12531115 848 Aluminum Straight Pipe Wrench 48 1200 6 150
31000 6 6 150 3/4 2031005 8 8 200 1 2531010 10 10 250 11/2 4031015 12 12 300 2 5031020 14 14 350 2 5031025 18 18 450 21/2 6531030 24 24 600 3 8031035 36 36 900 5 12531040 48 48 1200 6 15031045 60 60 1500 8 200 Catalog Model
No. No.Nom. Sizo Pipe Capacity
In. I mm :41352* 142 | 4041357* 2 1 5041362* 21/2 • 65
Catalog ModelNo. NO. Description
Nom. Size Pipe CapacityIn. mm
89435 14 Heavy-Duty Offset Pipe Wrench 2 5089440 18 Heavy-Duty Offset Pipe Wrench Th 6589445 24 Heavy-Duty Offset Pipe Wrench 3 80
Rated PIpeCitilog Model Capacity
No.- No. Description •iiC i m.
pl. TubeCapacity Capacity (0.D.)In. m.In. I mm
31335 ,& 2 50 31/2 90 1/31340 1'/6 2 SO 372 90 1'/31345 1* 2 50 6'h 135 ls'31350 11/�042 2 50 5'/2 135 13/431355 1'/'I 2 50 9/2 90 1'/431360 1% 5 125 7 175 231365 1 2/4 5 125 12 300 231370 1'/4 5 125 5'/Z 135 29Strap disi,Ied lor use with plastic p*e.
31310 C·12 LI•·OutyChainWrench 2 50 1%31315 C-14 Heavy-Duty Chain Wrench 2 50 &31320 0-18 tiee*Dirly Chtalin Wrer·ch 26 60 631325 C·24 HeaVy-Duty Chain Wrench 3 75 8'/31330 036 Heavy-Duty Chain Wrench 4'a 110 1574
. -I.--Il=�036i= - :» ...'..»=«,=.....=.&).-#»..&.#*.I.*#I..#=,=
.Jr .7,.f. 1·9 · .:.. ....../.:_
6%, 0 ./. . t..:te... ..'*:
.r':•:: Ridgid5.' Ta... .·- Arym' 'I
=..5..2 .:32:...
2.-'I'•••4•ifi..&. 6..6•*6::.1 . ...
,<5,�042:....:.i·,i.174, - .
9,7; '.. '. . . ·ii...
Hinged Pipe Cutters
P .. ./. - ........, - ....'.45... -'..•-1:,7- -7, 'A·-5/ 2\ Jobsite''Supply Co. »:
N '6,4 Z :.....t- ......6 '1•11=1 (619) 295:6100 Phone :
·.5 . -·j...-.�036•t1·. .�036•' -:.- -i:.5. ...6 ......>\' :4,• . (619) �036295,6300Fax • · ''.,& .......,4 4........ 't . ' .£
�036<r Z. ..1- -14'.-1 -'_ 12-#-· I ··. .; , 'P·· . · ..... ....
PIPE TOOLS - PIPE CUTTERS
�042Designedfor rapid cutting of 2" through 12" steel pipe. The
eleven models operate with minimal cutter rotation as necessary for
tight quarters. ,
* Furnished with X-tra sharp wheel for up to 40% faster cutting.
Jobsite Supply
4. :3,
... .. .1 4 2-
Weightls'
lb, kg
•»- .•R
Heavy-Duty Pipe Cutters 4-Wheel Pipe Cutters
�042Fast,clean pipe cutting by hand �042Designedfor.work in areas where.or power. Extra long shank protects a complete tum is impossible. No...,-1
AN:.- adjustment threads, while an extra 42-A has a short handle for use in
large handle is provided for quick, • areas where only a 130 degree
easy adjustment. Can be converted /f/ tum can be made. Second handleIi/•• 1• to 3-wheel cutter by replacing
'J on No. 44-S makes two-man
*21:IPI Z. limillilf.- .49 rollers with cutter wheel, or the 2A _ - q leverage possible on large pipe
4 and 4S can be ordered as 3-wheel sizes. Both equipped with four
model for use in areas where a1
.�036. 1113, heavy-duty wheels.
MiES�254Sl No. 1-A & 2-A complete turn is not possible. No. 42-A>
Weight
lb. kg kg
61/2 3,0 3,17 3,2 9.17 3,215 6,918 8,218 8,222 10.0
1- '«·
172
Pipe Capacity
Nominal SizeCatalog Model HInged Pipe CutlerNo- No, Description In mm
73162 424-S* For Steel Pipe 2-4 50-100 13'/2 6,074227 424-Cl For Cast/Ductile Iron 2-4 50-100 131/2 6,083080 466-S* For Steel Pipe 4-6 100-150 281/2 13,083085 466-HWS- For Heavy-Wall 4-6 100-150 281/2 13,0
Steel Pipe74685 466-Cl For Cast-Iron Pipe 4-6 100-150 281/2 13,083145 468-S* For Steel Pipe 6-8 150-200 33 15,083150 468-HWS- For Heavy-Wall 6-8 150-200 331/2 15,2
Steel Pipe74700 468-Cl For Cast-Iron Pipe 6-8 150-200 331/2 15,283165 472-S* For Steel Pipe 8-12 200-300 411/2 19,083170 472-HWS- For Heavy-Wall 8-12 200-300 42 19,1
Steel Pipe74710 472-Cl For Cast-Iron Pipe 8-12 200-300 42 19,1
Pipe Capacity
Nominal Size WeightPipe Capacity
Nominal Size Catalog Model Pipe CutlerNo. No. Description
Catalog Model Pipe CutterNo. No. Description In. mm In. mm lb.
32810 1-A Heavy-Duty 1/8-11/4 3-3232820 2-A Heavy-Duty 1/8-2 3-5032825 2-A 2-A 3-Wheel Heavy-Duty 1/8-2 3-5032830 3-S Heavy-Duty 1-3 25-7532840 4-S Heavy-Duty 2-4 50-10032845 4-S 4-S 3-Wheel Heavy-Duty 2-4 50-10032850 6-S Heavy-Duty 4-6 100-150
32870 42-A Heavy-Duty 4-Wheel 3/4-2 20-50 63/432880 44-S Heavy-Duty 4-Wheel 2'/2-4 60-100 20
«' "94«•·'"-'»'«'"" "«"w"'•'e»'»»"•'»»·»«=-«=t,»'i"'""«=»=="'»«'·#"�0361....�036=«�036·,==i,=,'=�036»,«»=-»»»»�036i,«,�036•=,4.,s.-i •. , -:�036,.,»·,.,•....»«»,»,».,,...,s .- i..... . cii ...�036,-1
i139·.Jpbsite•SupplyCo.'•1•|B'f619)'295423foo Phone ". .
'•2.:lf.:i.(61,91 2#¢6300 Fa,i · «,: ·. · " ' •.·7:• 3•Zil,5.-2•L-11.14'·•. · :r..
. S.·,·,••r.....·:<fi..•o.;,d.*LE. I. : .41....:!.5. '·: , «. ">)-'"»..4;--11:;•' ..'--•'t: .'
3.# r--26. A'; .rt: '-
./ . ..1.'.... ... ./ '.....46. .Le.. i·, :�036RC...•*.'*-2.,-7"1,6t ·-
PIPING TOOLS
:ST :1-1....
/t·
Reed «
�042Itemcode: 08049
�042PipeCapacity: 11/2" - 6 (Inches-Nom.)
160 (Actual 0 mm)
�042Length:26" (660 mm)
2 . :, i ...
K
:2-*.,#r..' .Ii.. «... f: 2'·:, (. 5 ... ' - ...,
14 .....'. ..,·�254f...., I
TCl Q-TC6Q Quick Release�442 SC49-6 Ratchet Soil Pipe
Tubing Cutters Cutters*, -2......•..Il./.I".do- �042Besttracking, easiest cutting �042Thefastest way to cut cast iron
---7/ tubing cutters available. Cut soil pipe, clay pipe, and sm•11
copper, aluminum, light wall steel, 4 diameter concrete pipe is with a
and stainless steel tubing. With chain pipe cutter. Great for gray
special wheels it will cut a wide water applications! Reed has
variety of plastic pipe and tubing. improved the original
Also features a retractable reamer manufacturer's design by
in TCl Q, TCl.6Q and TC2Q. providing stronger jaws and more
durable adjusting screws which
are interchangeable with theCat. Item original tools.No. Code In mm Wheel
TClQ 03410 3-33 6 152 0•13}Q &3416_ 6-.42. ..7 -6•1 -165ES .D_.TC20 03420 6-63 8 203 01030--0343r- 3LE®2 3F. 179.Z -30--:<.ETC40 03440 48- 114.' 12 305 30- 40I¢6QILI0346b- 10-2Z-168 15 381 3OF=40
T10-T20 Tubing Cutters DEB3 Deburring Tool-51.• �042Popularcopper tubing cutters �042Deburrsaluminum, copper, and
• (T10, T15, T20) have large grip steel. Three spare blades in handle
knob for comfort during use. give extra value.k./. .rs/ki 7-.\..," Reamer is built inside grip knob for./ Jil/Y i
C'\3>5/convenience and safety. Wide
DEBO Deburring Toolrollers yield a square cut while thin
•>- cutter wheel profile insures a �042Forinternal burrs in copper
quick, clean cut. tubing. Features long-lasting high : ,12 -i•
speed steel blade, aluminum T=1 '4,=,is• 123 Tubing Cutters handle, and pocket clip. 17 '*
--4. �042Threewheels in the T23 allow
e.1 copper tubing cuts in close Im6 21quarters. The T23 requires only 3"
4 clearance for work and has a 150°
cutting radius. Large capacity
(2" nominal tubing) means the T23
gets the job done when mini
cutters are too small. Includes••f• OLBUCKTi oiier
r-- - miIlilIIH �042ReedOilers effectively deliverlarge knob with built-in reamer for
----illill ..-.. threading oil to piping work.comfort and convenience, plus
.............%187/lillI -large reamer in body for larger 1-Wikill=•I•- 1 �042Thesystem double-filters and
tubing clean-up.• recirculates oil as the chip tray
catches the big waste pieces and
the filter strains out any small
particles.
Cat. Item Actual �042OLBUCKT1features a sturdy
nozzle made from turnedNo. Code 0 mm Copper PE PVCfiF 03483 - 1/8' 3-25 0 1 - 2PVC
aluminum.
ims . 03485 1--32-,.0_._ -lzyp.vc_T20 03487 15-54 0 1 - 2PVCT23
.-1-6541- 70-•- 3T23
---«-il#&.-I. .i••«*'.tt.*.&*..»-i '•«-t./-/.'««»#••««t••t�036.----•*..-t'•»»,•�036•»«,....'*.SI#.i£/.. »,» ..t.»=«»=»»=«==t:
Jobsite Supply 173
O.D. Capacity Length
Actual Actual
Inches 0 mm
1/8"-15/16"
_1/4" r 15/8"_-1/4" - 25/8"
-318"--3 172'r -
17/8" - 41/2"-4"-65/8"-
Cat. Item Nominal Pipe
•,O- -,ii•- -5213--- -'DE83 04437 -/imifed
O.D. Capacity Cutter Wheel
PlasticActual
Inches
'-1" OP23tl.61..1.12£5/8" - 21/8"3M"-21m'
-022OP2
«»/-:/"t»==/" S '.....'/==: ,�036t,=»5"tm
"3- ,» 3.........:6'i.- .....9*.e.,e- .1/ - r .. - . - .4.- . ......... 9 . 6.4, ·it
. ·' i ...... . ... . .':#:. "*<:':»-illu.,:
294.-.--1. .33 )•ti-,1:1••..,-.1.- ·41--
MC1 - MC3 Mini Tubing
Cutters
�042Foruse in extremely tight places,
these tubing cutters require mini-
mal swing around the tubing. Mini
cutters can be used on copper,
steel, stainless steel, and aluminum
tubing. MC2GRIP has rounded
corners and edges of the body are
more comfortable to grip when
rotating the cutter around tubing.
RS1 R - S7290 Ratchet
Shears
�042Ratchetshears are ideal for
cutting PVC, PE, PP PEX, and ABS
pipe. One-hand models RS1 and
RS1 PlI offer a 7-step ratchet
mechanism for best mechanical
advantage and smoothest
operation. RSl PIT has a corrosion-
resistant, plated steel blade. The
RS2 features 2" capacity, extra
wide, v-style jaws for easy
alignment, and long handles for
leverage on tough-to-cut pipe.
RS7290 one-hand style, 2"
capacity shears cut PE and PVC
pipe used in gas, water, plumbing,
and industrial applications, as do
the other ratchet shears. All ratchet
shears' blades can be easily
sharpened or replaced.
4 • G..·�036«'» ·-i: . . -:6'I 1 1 Jobsite'Supply Co. .i
. . te ..13.,f,2 .1 'f: '1•. (619)'295.-6190 Phone -9
•' •.-:,-'""•-..: 6:5:-•-©•r':...1*....(61.9)295•9300 Fax · . 4
'_' .-I.,--,1•1*;._--LI,___ -2-li•*.1%,3",112_ ._t•.- . •" ."·
PIPING TOOLS
MC1 MC2 MC2GRIP MC3
F•V- CEK '"'.01"-' fr.•pv
Cat.
- No:_.RS1
__RS1 ELI_RS21:157290-
Item
Code
04176_Q4175-
04177-•18213
Capac
Actual
• _•Inlihes_1.7"
.. 1,ZZ'--.2.4"
»24%,A,#a
ity
Actual
omm- .-,
42
...42-�036.63
-63 -
RS1
*Jobsite Supply
in
32633
- -345T. --345T
-O-.----'-
RS7290
mm
11/4"_Ii]21all
111/16"
31•/mi//
RS1 PIT z•
-rAr-Vi.V.
- --.
i/ :20 :i .. . ...gl .. i.... I
........' ...•. - '2*.4./.•,., :..:1.--,1 '..-4.�036.
-
Cutter
Cat Item Actual Actual Cutter Swing
No. Code Inches omm Wheel InchesMai•" - OSi78 -•8"-5/8" 3 -15 32633 1-1/f• -
AL. -03499 -li8".--15ll.61.1.2.:z<L_..StS[_.- 3.11ll6.'LMC2GRIP 03493 1/8" - 15/16" 3 - 24 345T 111/16"
t'MC3 03495 1/8" -11/8" -1-7/5••
%18•'669
RS2
C ,I.
1.- ••: il, = ..t»'»» 1.:. «" .-'"','.» ,«»,1...,»=' t..««=t.. «"»'.,t«'..
174
O.D. Capacity
3-28 0
Length
.....,1, ..,»»,-I#.•*•*..'*........=. ..../-:......•.....'.-/......» ./*..• I ..... I .. I ./- ..'.--...1
..:· ·i\»10bsitd,Bilpply Co. ··4:6
· .-·'' �042•2:z:!·:(619)'295;6100 Phohe
:· ·).·•2•3·4(819) 295203Ob.Faii ·t'3i'Itt·· .1. --- VAA:�042'�042.:*6 :. LL'' 1 -
6--.-_._-.F»L,L·,�036.A....rij:u-_..z_.·••,--.-6..--,
TUBING CUlTERS
Jobsite Supply
C ./ I .ik .7.,
.:.7 '/9- Reed
.. 4.1
11
· : 4. ·:.•6t- • · ·'· ·.. ·s··5%0·' -. ...::.:L...»:f...... I*...,
': *ki_--&.......· _.Zr·#.,•-*•, %314.
Midget Tubing Cutters.1-03*1 /7\ Enclosed Tubing Cutters
�042Designedfor use in restricted*.i.:. '.
r 1 -i spaces on small diameter, hard and *5, �042Featuresan enclosed feed
J screw to eliminate clogging and1
. * , soft copper, aluminum, brass, and; plastic tubing. /\'' jamming, grooved rolls for
close-to-flare cuts, and a
' ., : - r �042Strong,lightweight slide and fold-away reamer."h.'2.... : . : ...-\...---,-- wheel housing, large knurled feed
\e , �042Madefrom high-strength zinc
screw knob gives easy control of-
alloy with a spare cutter wheel incutting pressure for clean cuts. the handle. Cuts copper, brass,�042TheModel 117 and 118 have all and aluminum tubing, andof the features of the No. 101 plus thin-wall conduit.a seIMeeding cutter wheel that �042Model205 has all the featuresautomatically cuts after tightening of the No. 150, and includes athe knob only once. The model 117 quick-acting mechanism.features a special knob for easier
tightening of the feedscrew. We ght Standardlb. kg I Pack7/e OA 6./. 04 6
We ght Standard 1% 0.8 1tb. kg Pack 13/4 0.8 1
71, 0.4 6% 0,1 6 'h 0,4 6'/0 0,1 6,/4 0.1 6'k 0,1 6'A 0,1 6
---- Srew Feed Tubing Cutters Quick-Acting Tubing Cutters
4- 4 1
'**/ 6Clean, square cuts are easily /74 &9%•0 �042Models151-156 feature a
-1 - 7•-» made on copper, brass, aluminum, ''I it...r- -.ill quick-acting design, 1-beamand thin-wall conduit. i L./ •D.../ construction, hardened wear
4*,1:-7/-1 �042Nos.10,15, 20 feature a ap'dillilillilillifigi convenient fold-away reamer.
surfaces, and thrust bearing slide is aassemblies for smooth, operation.
.//Imy �042No.30 is rated for larger diameter �042Thesecutters are available insteel and stainless steel tubing.1 models for plastic pipe or ililf�042No.15-SI is especially designed metallic tubing. i_,�2549-for.stainless steel tubing. �042Models151 and 152 feature
fold-away reamers.
Weight Standard Weighttb. kg Pack Standard
lb. S Pack7/. 0A 6 7/6 04 67/. 0A 6 7/8 04 61'/4 0,6 6 1'/8 0,9 11'/4 06 6 1% 0,9 1144 0,8 1 17/8 0,9 11'/4 0.8 1 2 0.9 13'/2 1,6 1 13'/2 1,6 1
• 0.91,4 11'6 0.6 1 3 1,4 1
4'k 19 14'/s 1,9 1
�042NominalPlastlc Pipe Size.
4=1-'.t
175
Catalog Model Std.NO. NO. Wheel
Capacityn. mmDe,crlption 1
31622 150 Enclosed Feed Cutter E-3469 9,1% 3-2831627 150 Above wjHO Wheel(s) E-4546 '/,11/. 3-2833055 205 Ratcheting Encl. Feed Cutter E.3469 7,2% 6-6033070 205 Above wH-0 Wheel(s) E4546 '/4-23/. 6-6066737 150-L Enclosed Feed Cutter E-3469 1/4-1% 3<3566742 150·LS Above w.1+D Wheel(s) E-4546 1/*-13/8 3.35
Catalog Model Std.No. No. Description Wheel
CapacityIn. mm
40617 101 Midget Cutler WIth Spare Wheel E-3469 1/4-1 '/8 6-2832975 103 Midget Cutler E-3469 'let. 3.1632985 104 Midget Cutler E-3469 8/ie-'8/,e 5-2497787 117 Selt Feedng Midget Cutter E-3469 3/1*15/1 5-2486127 118 Sell Feedng Midget Cutler E-3469 '/rl'/s 6.28
CapacityIn. mm
Catalog Model Std.No. No. Wheel
Catalog Model Std.No. No. ' Description Wheel Capaclty--.-Ii.
1n mmDescript on31632 151 c)ulck-Acting Cutter E-3469 '/4·1'/0 64231637 151-P Above w/Wheel for Plastic E-2155 '/rl'/4. 10-40.31642 152 Quick-Acting Cutter E-3469 1/*290 6-6631647 152-P Above wMIheel for Plastic E>2155 '/*�0362* 1063.34572 1529 Above w/Wheel for PVC E*5272 V:-2 10-63·36597 153 Quick-Acting Cutter E-3469 1%-3'/2 32-9036592 153-P Above w,Wheel for Plastic E-2155 1-3* 25-76·31652 154 Quick-Acting Cutler E·2558 1'/4-4'/2 48-11631657 154·P Above wmheellor Plastic E-2156 1'/•4' 50·110'31662 156 Quick-Acting Cutler E-2558 4-6 5/8 100-17031667 156-P Above w/Wheelfor Plastic E-2157 4·6�042 110.160.
32910- ' 10 Screw Feed Cutter�042 8158 '/*-1 3-2532915 10 Above w/H-0 Wheer E4240 '/8-1 3-2532920 15 Screw Feed Cutter F-158 3/1*�0421'/s 5-2832925 15 Above w/»D Wheel· E-1240 'Arl'/8 5-2832930 20 Screw Feed Cutter F-158 5/e.21,/8 16-5432935 20 Above w,1'H-0 Wheer E-1240 64'k 16-5432940 30 Screw Feed Cutler E-2558 1-3'/s 25-7932950 30 Above w,1+0 Wheel E-2191 1-3'h 25-7997212 15-Sl Stainless Steel Gutter E-1525 aho-1'.111 5-28
Wow avi lable wIt 1 spare cutterwtmel and edra arga knob fo r eastertigm• rdreof feeds:rew.
... 1 - ...0.. ............ .....7
.�036.,..: . ./.......�036
..- . .Ridgitlit«i '· .". ;' ' . •11,"'.'ill.
Catalog Model
No. No.
33220 E 10944185 E-103244190 E 1032S33135 E 196233225 E-263283140 E-318675557 E426675572 E 226733105 F 333110 F 3S33115 F41933125 F 22933130 F-229S75567 F 36633145 F-36733150 F 367 S33155 F-38333100 F 51433120 F 51575562 F-54663297 AC 1586
-'...:- ..
'/0,•&4'9·:i' A.:ft.......4: 25,:l ... f.
'64'L: i,.../9.'.:.'.
i'&25,9#.-. -,-1_.Jit.
BladeExp.
.360A50 �042�042.450 �042�042
.265.244.680 '.665.400312 �042�042.312 �042�042132 0 �042
.411All.375.470A70.265.312 X XAll.433.244 .····
---,:, 7 -'..- ".:i'i·.•I'l'..4:7:.f.....fti•L'-.•.,•-,i,•.f 4:•-'.,1. i31
., ......, .- ... .. :A..1 - -'. I'll'.ill-L. . . ... I. .... ..•
i <.·: ff'".r -I''I.-M..1': 'trd': I 32.7'W ilih. ..:'t.:... 1,•4 - ...0.).1...../78:2.....0.-fi--,7, 9'. ··: >.41.0- t..-_.- - e.....2, '.�036v.--., 2....•.i:..... .· .i:... . r:
X Denotes Cutter Wheels furnished with original product
CUTTER WHEELS
�042Denotes alternate Cutler Wheel. Sold only in package lots Indicated.
· Manufacturer Cutt,ir No. Manufacturer Reed-'..... ---*--
Wheel Catalog No.
RIDGID'
315 -
10; 15; 20101f103,104:103•150, 131P; 13227512,--
'...152Pi.1532 ZOSPL••OL,_ . _.... _...101; 103; 104: 105: 150, 1504 131; 151:134 152; 153: 205
(105£150/SOQ.131; ILD32: 15% 153,205 :131; 151; 132; 152; 153,205
3 .' '....1315 139,1512 1522,1532,2OSP
134P; 136P, 1542, 156P
136P; 156Pellmi&&2•mlM:WelI31.Imli
14 ZA: 42,% 202; 360; 820; 364; 7322152*328:20*1-�254ojNg:364; 732 -· T. ir
14 4 42A: 202; 360; 820; 364; 733
30; 40; 106; 108; 109,133,134; 136: 154; 156/0,m•OETOF,WK.T33: 134..136:354, 155 1
30: 40,106; 108; 109; 13% 134; 154; 136; 156r30Pi'*OP; 106rl'08: 109P; 133Pf'134P: - - -· ..13621.1541'/.156P�036:-....,-_.
30P; 402 106,108: 1097 1332,134P;154P: 1362,156P
35: 4% 44% 4665: 466C; 466HWS; 468C4685; 468HWS, 4724 4725, 472HWS; 76423%3=885Ta-41/MNHi.%-468% 468HWS; 472C: 4725; 472HWS; 764
/19539TAMOns/•0%5•Mal)1114685; 468HWS; 4720 4725: 472HWS; 764
Reed Standard Blade Exposure**Item Code ,* Packl» Inches mm . Application .
%E# REM#37•.£11%fateollstelp)24111,035171; FES466: 468; 472: 1224466* 4665'4661%, 48(7685:•""- '
1, 468HWS; 472CiAZTS: 472HWS- .. .....65; 208; 209
StandardPack
66
44126
664
1264
M 50E 2990
351;49E-1240,F-158"-E#741 -
E-3469
E-3495
E-5272�042I
E 2157
E.2830/*1932IS,
F-514
F-35
E-2191' 'E·2558.'
E-2558E.5299
E-5299
=ElimF.229
1-1./11513,3
R2558R2990OSS '-0R1740
34ST
14-9,#IR3495
R5272
6QP
8OP/8119;*li
2RBS2RBND- 12RBHD
304030-40 -51.R255836PVC
30-4OP
3RG
-861/Ih 301"i
=*03667'0165L.-
03660- 04188
03666
20366803688
04186
04198
04199i.923
03612: 91613
03613
0;665-036650367004194
04190
=.03616
120*1/
=
=2.6
12-. -
12
=Al6
•ili,il6
Ng."==4
*=3811:4
itil/2/212
125/93=
12
12·'- 12.-
12
4
'Ses1111•3=
E-1962• E.3186
3RGaR3186 t
0361703526
00.
300.
0.
ZO,1
-a
8-
iw-.0
0n.
0.0
in .
mi .
7.4,4501- 'liA-4 0.285 72
- 4 .-'0.680 ' '17.3
188117
3=1801 148
146
49/).29002929537550
7426=)750*85•2-300
T29*Z.29617*
)25025C188
317
)343
2353)399
39/
3922
.. 4.83.0
/9/4.63.7
-3.7
c£ri7.4
37£375
20*i"14.0
25*219.1
Dj337.6
=71=7.5/&11*
6.411031#
4.8-9.6
&7
117.10.1
a.la•
/01%
1
Muffler Systems Tubing �036_Copper; Aluminum: Brass; Steel Tubing
infrge<£*7/al"lizill//il/"miCopper; Aluminum; Brass; Steel Tubing56ft'Fle,IS•Pla,tk -'-' '
Copper; Aluminum. Brass
•liet)•Zajaid.251**,Il.•,Aluminum/"Jin•dr/*diA•BEN'#mill/£/ImPVC; ABS·Standard Wall
2123#ABriuiky,119fwImIThick Wall PE
211IbialMQ'"Yx*pr'*"*mpr'•rlkilABS: PE; PP
2FHDkj•.li•.*Er-KWV•••VIVASteel; Stainless Steel151'F:•EBallsw•l#t.All,Ap-fl13HD for Steel: Stainless Steellaidit"*1•mia£...<•R•.•I•.•lilim•Copper; Aluminum; Brass; Steel Tubing
/&<6*Me•.unit®•,•iii.#HINI•F*321Muffler Systems Tubing3'-6' PVCi'·t•Heavy Will-'---' • •'-·
- ....'.... -,-,-...---.....-:ABS: PE: PP
SABS•PEgg•Steel: Stainless Steel
. ·3*liti•*BJE.Swell=eemai"Aw"•11
*31'66CM#iblbiste.•.ol.Steet•tairitessste,I; Sd•811,te 80"-.3•3Cast Iron: Ductile IronStier DOctile 1,60 Hed,y WST - -
122 steel; Ductile Iron Heavy Wall
Jobsite'Supply Co.'V,
(619):295-6J00 Phone ,· ..
(61•9) 2953;6300 Fax..., f>.'.9..4 .... I. I J
I.M.......• 41#
-9-1V.V
i
f
F-367 R367 03639 6 0.480
1. "=-�036�036=.,»,».'1'. ..,»«»«»««,» t."t'="'»=....�036='»»,"�036,--�036=='.»t"t»=...,=»=='t�036==�036==.-#-»=..»»-*=-=--....
176 Jobsite Supply
'. ./
X 00 00 00 0 In ° 8••R•••2•8•@SSR AN11#iNBJLV+MS:MWIsigGEiER@62£562•.•.Mlie
SY
6 6 6 g s m E M m E m R * 1 2 3lasdgmemen¢am=-449.8--5.-50.-
Pipe
Cutters
(Original
Product)
Model
Application "
X , Cast Iron
X X X Steel Pipe & Ductile IronX �042. S.S. Pipe
..i .. X.IXI.X.0 Grey Cast IronX Cast Iron
�042�042X�042�042X.IXSteel & Ductile Iron HW.C ......... HeaW Wall Steel
D �042X Cast & Ductile Iron&. X Steel & Ductile IronCD S.S. Pipe*.... �042�042'. Grey Cast Iron=I0
.. X �042XIOXIOXIX Steel & Ductlle Iron
.. ......... �042S.S. PipeX �042 Steel Pipe
X X X Steel & Ductile IronS.S. PipeGrey Cast Iron
X �0420 -· Steel & Ducme Iron
X X ....... �042Steel & Ductile Iron........ : Steel Pipe
Concrete Pipe
s«'#Z'N:.. ·-
r...'4· h :6 7,
I\:MiJobsite:Supply Co. ··�042'· 6 ' S:--"·* .,•:·
t'., Ilt-d••(619)"295123100 Pho'ne· '-t ·'14'. - ,- '.0
I..· 1 -i . :2(619) 295-6300 Fai( ''S"·•'i (."•3::4'
-···.-f--·-•-6.*,w.•.a-• I.-*-�036I.*#....•...... * .' I.* · «,
StandardPack*
For Tubing Cutters - Metal'-0•S--·--- -055 12
,_32633-_75015
_,750•6 -3040......
---34H - -R4546
,.,_R2558 , -30-4OSS
.. 73505_73515
Reed Cutter
�036-./2...1/,.-../*
--/7 ./--·46. -�042'...
CUTTER WHEELS
TC10; Tcl.607tdo;Tio:-..=- -
T15; TZO; TC15
4 m
- 12 _. 2 . Mcj-0,-Tci-4-.- ..-2:27•3.-1 -.12 TClQ; TC1.6Q; TaQ; T10; T15;
T20; TC15; Ma
1 1Mil...- L.Z:_- -17--1-..1-,TC11; TC17
- .•1; T•17 ........---.
TaQ; TC4Q; TC5Q; TCGQ; TCSQ
Ma. -Zie*JETch-01*SQ34Q: TCaQZ..I': .
TOQ; TC4Q; IC5Q; TCGQ; TC8Q
TC14
........ ----12_-
12
-12..12........../..-12 -.,.-6
- -12...12
12
For Tubing Cutters - Plastic
..-...- 09 --2CON
, ..__1·2PVC..- _R10279....-
....- -Rlz•0- --3040P
IZZ'535.Pvc--3-6PVC......�036. + .. .- --.
....... .6QP.. -.8OP
For Pipe Cuttersim/£....3..84-
03522 HI4
4- 03612.-1- - _.'28BS._03613 2RBHD
2•.6- 5 - -1 Noi---03624 2RBCI
4
12. -4
-2.43-I_12412
4
--.. ......-- 4.-.--
4
_..12•...•-12
3•.-4.---4
For_Hi•ged Cutterf.03502 - ._ HEJ/2 _ _.. _ 4_ _
03504 1154 4
/&4; L Z.iBI*Z- .-2.--43103506 H56 4
r•347-I 3.31•0•L-• - 2 7.-A03508 HSS-12 4
E•35-•i-Or• 1•.••Hni/CI .Zj.31103512 , . HX4 4
GRiC --I-HdizE -Iii*-103516 : HX8 4
IN#57r- "·-...�036__--. -.,.._-+ .'" --'·--4-11)9•8.-.,• ...4-,1....•
03522 HI4 4
m=24= HIS--. _.......4_,.._03525 HSPSES 4
2-03•24.-i. . '28Ba_-- ._.1For Rotary�442Cutters
Fojao . Rdb-36 · 4..,......
03535 Ra&30 4
:·-•j•Td•-•- --Rtok'-"'• r'-"-1-·•-·"·
...03550 RCX 4
... '1'CRE 121.£451/,•Tio.1.15:f-20-T. .TaQTgg;•TCl•QLIfRO:,T10;.T,15;120 _
TaQ; TC4Q: TCSQ; TCGQ:-Me-�03611*-1+ •1,• i.-7.3»1.-
TOQ; TC4Q; TCSQ; TCGQ
33EB•,TCAOTeQ: TC4Q; TaQ; TC6Q
-'Jt#Qi*Q-LT-(84..-:7 -3 :.:r 2.7..-TCGQ: TCBQ
3-1; 3-3; 3-4
=3•2-1-97•FAW-G-,Ii:*..iVQI.21*.ILL.2-1; 2-1Q; 2-4•.; 2-3; 2-3Q; 2-4
3-2-li.2:3142 2-4-WG�036-1., ..:... -2-1, 2-1 Q; 24WG; 2-3; 2-3Q; 2-4
H21/2 - ,H4. ..........$
.H4.. -1. .. ........» ,-H6
. Z.EFT HCT -:--.'-,H8; H12
- T' H-70H-.':E -.11.H4
3_ H& • • -'.- . -
HS; H12
' -· ,-HS: H12_. .__ .H4
..116; H8;,H 12 -_-..H6; H8; Hl 2
-.4.- H21/2 .*. _ __.
LCRCB: LCRC12; LCRC16: RaO,
RC24:RC30; RC36_. -,-: ._s-1.CRCB; LCRC12; LCRC16; RC20;Ra4; ROO; RC36LCRC8; LCRC12; 1.CRC16; RC20;
RC24', 8-G30; RC36_.•- -,i.,, -_LCRC8; LCRC12; LCRC16; RC20;RC24; RaO: Ra6
Blade Exposure**Inches mm
0.160
0.12510.281_
0.180
-.3.12ZZ0.125
- ·- •1250.250
.. 0.146. ' +
0.161
• . 0.188 ,0.250
6-6.11* U0.170
• 33.21530.180
1-4.61-0.221..... ......0,148
0.343
- - 0.575.0.377
.1.. 0.550 ,0.750
-- 17O.383'.0.258
..-0:300.,0.296
i �036' 0,295 -
0.172
0.3120.320
, -- '*5,27-r.
0.390
,--, _.. 0.350 -0.450
-.-·-. 0.383_-0.383
037.6-0.567
3 :•.•.6.82.10.258
Lo.41.0...0.4000.172
0.635
... ..:-'.... ...0.500
-O.531 =
0.800
Jobsite Supply
3.2
4.6
3.2.-3.2-4-,14.... :32.....6.4
-Il l--4.1
1-2.M. -
6.4
.. 4.3,4.3
-1.7,<.4.6
;- -7,1_ :5.6
=3328.7
1.: •'*•i9.6
=,3/RE-19.1
..P...,. ..9.76.6
7.5.._7,5�036,
4A
,•'-7,9
8.17.Q9.9
1.8.9- ·11.4
lim=9.7
3jY.1.1114.4
igaric6.6
11'674.*.
10.2,-2-4.4...
Application.- .....-.-�036t...........
41- ---stdi-Afdis stlel-
-I.. --.16.1
12.7
-93.8-
20.3
'.Reed ...
Copper; Aluminum; Brass; Steel Tubing
-.. asr Tubing _--_Copper; Aluminum; Brass; Steel Tubing
-1 .CoDpe);.416@1!iLibiSsiTsieellubitiS - :-• •. 1
Copper; Aluminum; Brass; Steel Tubing
1-epi,Jikm•:BkiliiWI•miIM#5*ei."Copper; Aluminum: Brass; Steel Tubing
I.FcOPPQI:LI•]Rrn;�036BrassSteel; Stainless Steel
-li.-I...... I......�036...1--. .'=•f.*25951-em-5 liiwng- .
Stainless Steel Tubing........
-- cojimiiA10)•Ji;-Bi•..StiRLJiblog __...---,1Stainless Steel Only
.:..-ABS:-PEi.2#3.•kEBR•1*EX. _•-.ILl .1.:r PE Conduit
. pvc Cpvc _ ..... ...-........Thin Wall PVC
-.*fl•ibld-MastiEL.Z_. -=2 2--1 ----· iABS; PE; PP
" PVC:St•b-daidA.HidW:9%Ili#CiNC:.•.--233"-6' PVC 4' Heavy Walt CPVC
ZDhick Wall PC -3 .ZLE-1 27. ' -- 3ABS; PE; PP
.: SidelistaiES•1.-.. ,·:-- ........ -_Cast Iron; Ductile Iron
..-idieelisGinlaTi30EE...IZIL-IZ.7HD for Steel; Stainless Steel
.23*6•1;3idinIR# st661•, ZI-i.1•1..........Cast Iron
,-.. Steel; StatolesISteel-stdel; Stainless Steel
. �036" Stlel:3*#RitediEficdif]ioni'0Rtile,lron-1..2
Steel; Stainless Steel13.-576«1;3taTBIEALS£•eligast.kin;D*ijallelro-n--.3
Steel; Stainless Steel
I....sidil; sfitlir•.Stlie-••i.H-80Zl.Zl_T.1Steel; Stainless Steel; Schd 80
. -1.•sfulljta••izielischOo".FI *-3-L- 11---' 7
Steel; Stainless Steel; Schd 80
1-'5iFel;.sibinlesisteelfschd 100___. _....liCast Ir6n; Ductile Iron
.'. _ (Si IrBiE,DuER-e'i•R•i -,, . . ,3.1.::ETZ..1Steel; Cast Iron; Ductile Iron
---1. •1. Cait Irdtii DuEille froii
Sical)"sihihle//Si'RI--*'-- --*
'.,-...,-.... ...............- . .....-'.......... ...--'.Cast Iron; Ductile Iron (manual)
7 Rea*'cast-Ir87 kiu-dile-li6rf (plitj --' .
-' ...=...-,I.- .--....-.Heavy Wall Steel; Stainless Steel
...... ":41...''. d., .
, At-* ... · ·.,:,rr•...-5-
' �036�0424 & ,..,-;4 A7 42.--· ... 1, 3. :1,. ».
'Ak:.0. 40 'I:
i Item - Reed1.Code Catalog No.
- 63E57 -o ' "•. 3T23 -
6.b#59,I. 1--ocsslgli-- -**03660 ' O
173r. .2 I03662
F•f-IL -03665
.'O1466-- i03668
/1429-3 6.03671
'036.90 22.-03691
1 04180...04181
..0416:-04187
i.-bly#5•_04190
i®32-*04194
kpill©04199
-. 1 EW. Il
:
...»... . '»»1
177
e
•6.-L.21 1•3.<.ff.-'.•,•il.L.-'.1 Il'il- ..«*...1-...,f
11'i
A- /16. 3,%./0
7..../ -
lilli
/Pipe Reamers
Note:All reamers include handle.
No. 206
'' ·. :.. A Jobsite Suppiy Co. 751 15' i / /
'In..12:=::• (619)-295-6100 Phone . - •
..C::. :'2 k':Y; ..(619),295:•6300 Fax• • .•... ........,.-.I. - .26·....'. '• I... .© ...
...... r :
- '.3- ... i.-:, I.:�036-5.:)1'.A:....
PIPE TOOLS
�042Cuts1 1/2"- 6" No Hub® soil
pipe. Ughter weight and closer
spacing of cutter wheels, together
with simple ratcheting action, give
smooth cut on lighter wall pipe.
�042Ratchet-actionhandle parallel to
pipe allows for application in
trenches of minimum width.
Complete with hand guard to
protect operator's knuckles when
cutting.
No. 276
�042Providesone stroke cutting of 1
1/2"- 6"* surface weight, No Hub®
soil pipe, clay, asbestos and
cement pipe. Makes repeated cuts
quickly.
�042Expandcapacity up to 8" service
weight soil pipe by ordering (1)
catalog No. 33665 Chain Extension
Assembly.
No. 2-S 1
Soil Pipe Cutters
0.#2 No. 246
�042Cuts1 -1/2"- 6" clay, cast-iron,
asbestos, cement pipe and 4" class
22 water main.
�042Ratchet-actionhandle parallel to
pipe allows for application in
trenches of minimum width.
Complete with hand guard to pro-
tect operator's knuckles when
cutting.
...•OF=*r.-
' Mi
;K
No. 2&3 1 •11 No. 254
No. 2-S Spiral Ratchet Reamer - Self-feeding spiral design for
extra-fast and easy hand reaming. Please note 2S Reamer is not suitable
for use with power drives.
No. 2&3 Ratchet Reamer - Long taper design will not dig in.
Suitable f6r use with power drives.
No. 254 Spiral Ratchet Reamer - Hallow center reduces weight.
Large pressure plate. Hardened alloy steel cone removable for sharpening.
Jobsite Supply
�036....
Replmt.Catalog Model Capacity Std. Chain
No No De,cription In mm ko- Pack Cat#Sol P po Cuttor .-.....4.1 /2-6 50-150 82 1· , 33670
. �036·:• No Hubek'- ·':.In·Place Soil Pipe Cbijr j 'h-6 50450Sdi Pipe.Cutter I:.' 1'/*·6 50�042150Soil Pipe Cutter 1'6-6 50-1503brque Wrench forNo Hubo Cast-jion .Soil Pipe CouplingsSoil Pipe Assembly Tool 1,/2-8 50-200Chain Extension Assy.
'11No. 902 Torque Wrench -- .,79\1. 72037 Tristand Chain Vise
�042Model 460 - 40% larger work.�042Presetto eliminate guesswork in
No Hub® soil pipe installations.surface, increased pipe capacity -
6" wider, rear support and recedingAssures proper coupling tightness
ceiling brace screw.for strong, leak-free joints. The
5/16" drive tightens with a fast
ratchet action until the wrench
clicks for accurate 60 inch-pounds
torque every time.
1-=,t«......'.«»,«,•,t,�036t,t'.'.-#. "-' =
178
Weight7. •-- -' . TE'.i
68650 206 · it t..'·.-· ,• . 1 18
69982 226 18 8.2 1 3367032900 246 25 11,3 1 3457574207 276 23 51 1 3367031410 902 92 0.2 1
32905 228 223/4 10.3 1 3439033665 9 3,5 1
Cal:acity Wi Ight4.Ln. , , mm *. lb.. , kg .1/4-2 6-50 7,/4 3,3
1/8-2 3-50 7 3,2
3/8-3 9.75 11'& 5,2
292-4 62-100 14 6,4
Std. Replacement'Pack Cone Cat. No.
1 35020
1 34975
1 35090
1 35135
Catalog Model215 210._ Description34955 2-S Spiral Reamer
34945 2 Straight Reamer
34950 3 Straight Reamer
34960 254 Spiral Reamer
S ..-•.-lilI ,"»=-. ..�036="=«='.- -Ii.' ....% . -.. .--. -I...I-'ll....#.... . .. .. # ... .... .:,Itt'. ....»..t'.*'..'...... ...«.... ..... «, -,S'. , '. ..«=1
k...
S t.
4"K//444 -· 5. 7%. 794:-• I,1 4940bsit«.Supo4•Co.
-.1.'.,•97,295:6100 Phone ':
1.S':i-,3t- -.,(619}3*630/.Fak 3- 'r'.1,·.'·.' ·: j··<·••fi•••/J...512.I. :/ ·
'' ··· 'K··,1=11.C,»·•.A:;RlZL--1.-21':· ·
North American Standards
. -J'.'.... .... .......i. ':*9,..r.2.2 21.. ........'.. ....•2/34•71:7.0 . ...:..:1-,t·T·I:ffti•·.,
. 3...- S..9/ . .- .tie. .....•:,·•Fr,..,�036.:. ...i .-,..kA....•*.i.-•=·..-,.-..'·' -:*d'-· . .-/- �036.--.
*Dies can be reversed In die head for close to wall threading.
THREADING EQUIPMENT
Pipe Dies for 00-R, 111-R, 12-R, 0-R, 11R Ratchet Threaders or 30A, 31A 3-Way Pipe Threaders
Jobsite Supply
S Ridgid'I..
179
-.
... .:...:eis .9 t.i--76·•#.6- '.
Exposed Ratchet Threader Sets Exposed Ratchet Threader Sets
�042No.00-R - ---�042�042No.00-Rcapacity 1/8" -1" •capacity 1/8" - 1"
•':a,z3 .No. 12-R �042No.12-R
-• ' .... .-: capacity 1/8" -2" ...r capacity 1 /8" - 2 "
Model We ghtNo. lb. kg
10 4,5111/4 5,113'/4 6,2233/4 10.8343/4 15,845'/2 20,7
Ratchet & Handle Ratchet & Handle
•» --*.i �042Ratchetknob indicates forward -E,x'.= , �042Eachmodel cuts three thread
;•• and reverse. Die Heads snap from sizes and uses 12-R ratchet
..»-I"*•• both sides and lock in place. threader dies.•,A7/.F
RHHighSpeed for
Model Capacity RH RH High Stainless WeightNo. In. mm Alloy Speed Steel tb. » kg
30-A NPT A.'4'/4 10,12,20 36515 8'/4 3,830-A BSPT 44 '/2.'/4 10,12, 20 65290 81/4 3,830-A NPSM 48, '4, ,/4 10,12.20 8,/4 3,830-A BSPP '/0.'43/4 10,12. 2031-A NPT '/2, '/4,1 12,20.25 36540 36550 36555
8'/4 3,810 4.6
31·A BSPT 1/2,34,1 12,20,25 65320 10 4.6 .1.31-ANPSM 'k, '14,1 12.20,25 36560
Model | Capacity I Catalog NumberWeight •
No. 1 In. I mm | NPT BSPP • lb. kg •
11.R • 1/2�0421'/4 12-32 • 36390 6513516 7,3 1
Capacity Catalog NumberIn. mm NPT BSPT NPSM BSPT NPSM
00-R 1/2�0421 12-25 36345 65175 3638000-R 3/8-1 10-25 3635500-R 1/8-1 3-25 3637512-R 1/2�04211/4 12-32 3648012-R 1/2-2 12.50 36475 65255 3651012-R 1/8-2 3-50 36505 65285
Model No.
Ratchet and Handle Only 00-R 11-R 111-R 12-R OO-RBCatalog No. 38540 38545 38550 38555 38540
:•1::RH 37810 37815 37820 37825 37830 37835 37840 37845 37850LH 38010
High-Speed RH 37855 37860 37865 37870 37875 37880 37885 37890 37895High-Speed LH 38050 38055 38060 38065 38070 38075 38080 38085H.S. For Stainless Steel RH 37900 37905 · 37910 37915 37920 37925 37930 37935 37940H.S. For PVC RH 70680 70685 70690 70695 70700 70705 70710 70715
*HS Reversible RH 49707 49712 49717 49722 49727 49732
t-Model No. 12-R
(NPT)Alloy RHHigh-Speed LHHigh-Speed RHHigh-Speed for Stainless Steel RHHigh-Speed for PVC RHHigh-Speed for Plastic Coated PipeAlloy for IMC RH(NPSM)Alloy RH
37375 37380 37385 37390 37395 37400 37405 37410 3741537435 37440 37445 37450 37455 37460
37465 37470 37475 37480 37485 37490 37495 37500 3750537510 37515 37520 37525 37530 37535 37540 37545 37550
83450 .83455 83460 83465 83470 83475 83480 8348551857 51862 51867 51872 51877 5188292690 92695 92700 92705 92710 92715
37555 37560 37565 37570 37575 37580 37585 37590 37595
.-»=,�036,�036�036==�036-==�036=�036=0»==�036,"=.�036�036=»�036�036�036=�036----,r--.----
.
- .· :,j:.. 'Rw·--- ' f:.. ·..2: vt,4 ·' '.- ." ':1. '. . '...... i :...i'FS...:. ...:•• WS.:t.. :..: ,
:.. ...C . 1 .: . i . . .':.3 L ...: :..f:P....mi*Q.. ·.·
..4 .: R,dgld�036t••• g#97>4,.4.Rfl... ..:.. #. .1:..498...i...307..2 - ..·...J:·....:22•.---.-,--44302*--1.3:mi--·.--JL
... ....,3,:W :4:...: ...'..'. 7..•. •:3\. Jobsite• Supply Co. ji.#- . ' . ..M:- I..:lf-;...I. , , t.. ·. i.:f:':· ·. ' - 1 1
4•.(619):295-69100 Phone .. .,:.
..: : j.,i':.--, ... - ..-ir-.*:1.f•:-4.'•. ' (619)29»00 Fax .·•
,·'•, .,.•..,•......'I"•F....•«..••.•....77 ·t. :...•,;34..· 12 •..
.l�036»...:'.:7 A :
..../.---63.'.4/Zi-2- -4*..
THREADING EQUIPMENT
,
0.1 t*-:•,/4-0.- A-- -
..94.rf
»* 100-, ;-*T.* i-....'
Model 700 Power Drive
�042Heavey-dutyhand-held power drive.
�042Featuresreversible 115V or 230V Universal motor.
�042Capacity1/8"-2" (3mm-50mm) pipe.
�042Designedfor RIDGID No. 12R die heads. Other RIDGID die heads (OOR,
00RB, 11 ID using adapters, threading 21/2" through 6" (62mm-150mm)
with 141/161 geared threaders.
�042CSAapproved.
�042Approvedto UL standards (NRTLC).
Model 300 Power Drive Only:
�042RIDGIDspeed chuck
�042Reversible1/2 HP Universal motor.
�042Capacity:1/8"-2" (3mm-50mm) pipe, 2 1/4"- 4" with 141, and
4"- 6" with 161 Geared Threaders; 1/4"- 2" (6mm-50mm) rod.
�042RecessedOn/Off/Reverse switch
�042CSAApproved to UL standards (NRTLC).
Model 300 Power Drive Complete Consists of:
�042300Power Drive only with foot switch.
�0421206Stand.
�042311Carriage wit lever.
�042341Reamer.
�042360Cutter.
�042811AUniversal die head.
�042Set1 /2"-3/4" Universal alloy dies.
�042Set1"-2" Universal alloy dies.
�04232Transporter.
�042418Oiler
�0421gallon Nu-Clear thread cutting oil.
Jobsite Supply
Weight
lb. kg
23<4 .
a9 /7\ 41
•* tz,f•Af.ki ./ /
gE diZA*C-••jfv#,&
-
h,--·#-
180
Catalog ModelNo. No. Accessories Description
42600 770 Adapter for 00-R and 00-RB 33/8 242605 771 Adapter for 0-R 33•8 242610 772 Adapterfor 11-R 31/2 242615 773 Adapterfor 111-R 3 1.42620 774 Square Drive Adapter - 15/16* 51/4 242625 775 Support Arm for No. 700 11 542950 8-171-X Metal Carrying Case for No. 700 29 13
andAccessorles72337 418 Oiler w/1 Gal. Nu-Clear Thread 20'/2 9.4
Cutting Oil41620 Gearhead Motor Grease 1 0,5
-«#...........% =...,='.t.....�036-1. .'»-",t", ...«»=• . .. ... '.1. 't«.•.--'. I . �036 -=.t . ... ,-:« - -I ...»�0361
'.- 4. . 'ar.*·· • *'<'' <-, . .1.t« .
tril.7 10. :.3.': ....
i:.*'' .....
.I:1.NA.JoBsiteS£/pp/y Co. .':. .,2 . .--'r.:'.. .Jc: -:-07•9t(619)"295;'61•10 Phohe '· • "' ., •
IN.7 .4.:- 1 . 67619) E 20$.08®81 Falii • ' : . -6.filit .: .rt ;,F...4.'..h fil ;-#9...651. 448'Y:.
...,__--_. ,- .A··.'liflk._-·....»*.-16-*•-1.......U• 11.L-�036..-•*.L- .•..C,_ ...*...1•H-<1• ·-·4 . r�042--$:t:'.•�042:
W. 1 ..4-1, 7.- ..
•.i•�036.4,8•* -Oller.L -.-I
--.......
38/7-...I-•
////I//41 /i•1//FA//
i 1», .
76'ik I ;
- 9
THREADING EQUIPMENT
Nos. 141/161 Geared Threaders
�042141threads 2-1/2", 3", 3-1/2", 4"
pipe with one set of dies.
�042161threads 4", 4-1/2; 5",6" pipe
with one set of dies.
�042Jawdutch prevents jamming.
�042Simpleadjustment for tapered or
straight threads.
�042Cam-typeworkholder sets instantly.
�042Fullyenclosed gearing.
�042Right-handonly.
No. 418 Oiler
�042Thenew Model 418 hand-held
oiler is sturdier than ever before.
The 418's pump assembly and
heavy-duly reservoir are designed
to increase productivity.
Pump Assembly
�04250%more oil per stroke than other
hand-held oilers for longer life.
"f. �042Anergonomic 2-finger trigger
design that reduces user fatigue.
, 1 �042Diecast heavy duty body with
1 / swivel nozzle with no exposed parts
4/ for longer life.4 �042Convenientanti-slip grip design
with integral hook for easy
hanging.
Model 1224 Threading Machine
Note: Threaders are shipped and priced without ratchet and handle.
VVe ghtlb. kg
20.5 94
Heavy Duty Reservoir
�042Thenew 418 oiler features a patent pending fastenerless twist and lock
drip pan that easily locks into place.
�042Newmaterial withstands abrasion, is lighter than metal and does not rust.
�042Newreservoir will not crack or leak.
�042Newmaterial is so strong that under normal use, no dents will form on
impact or shape changes will occur over time. As a result, the drip pan will
fit squarely on the reservoir time after time.
�042Integralmolded body eliminates leaks at the hose-reservoir connection.
Capacity:
Pipe: 1/4"- 4" (6mm-100mm)
4" - 6" (100mm-150mm) with 161 Geared Threader
Bolt 1/4"- 2" (6mm-50mm)
Features:
�042Threads1/4"- 2" pipe at 36 RPM and 2-1/2"- 4" at 12 RPM.
�042The1224 threads a wide range of pipe including black, galvanized and plastic coated pipe, together with stainless
steel, IMC and heavy-wall conduit, as well as rod up tp 30 Rockwell C.
�042Aninduction motor helps insure sound levels well within the limits set by regulating authorities.
�042Aspecial capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop
is experienced.
�0421/4"-2" Universal Die Head; 2-1/2" - 4" receding die head allows cutting of tapered or straight NPT/NPSM or
BSPT/BSPP threads.
�042Constantand proper lubrication of dies and workpiece with through-head oiling.
�042CSAApproved.
�042Approvedto UL Standards (NFITLC).
Jobsite Supply
. A ... .'..:... 94 Ridgid ".,Fit.2./00,1-'-1:/2.: 1 I4. ''.
--
4
... "Ir--
t
4
.. i=.--===»====.1
181
Catalog ModelNo. No. Description
10883 418 Hand operated oller complete. Includes 1gallon threadcutting oil, reservoir with removeable chip tray, and 54' hose.
72342 402 Hand operated oller with attachment for 1gallonand 2.5 1,25 gallon containers and 54' hose.
72332 #4 Hand operated olleronly. 125 0,572327 #4 Hand operated 01!er with 54' hose and hose fittings. 225 1,0
H........"..:lillI.-�042.9.--'ll'.1-•=•t-».'»-'-'I-.-'....I----'-Ill.ti . �036�0361,s. I · I- .--Ii./9.«lilI.--Il.t-lillI.,
1...'....�036.
'.S.*...--b..,
.... . :<4:: '. t..;.8.,. .:f.. «....1*: : .t '
...:......., '...:5'.ilit'•..:,;.: - ..
Maxis, T(161•' ,\.' 3.:.-, t....F>/1 ·i... •C'••..1.
----' . ..I .�042•�042�042i•.�042'I-/-)£......-'Ill....Il- L.,
.'-4'im#Al:-r....5,.
¥
' *AL'"Irrw./......
Maxis Pull-It 3000
�042Hard-working,lightweight puller
sets up in only minutes.
�042Operatesat both 25ft. per minute
and 100ft. per minute pulling up to
4,000 pounds.
' �042Requiresonly one person to set
up and operate.
Faster
�0422minute set up time.
�0422pulling speeds, 25ft/min.
and 100ft/min.
Easier
�042Light-weight(60 lbs.)
�042One-Personsetup and operate.
�042Noneed to bolt to the ground.
Smarter
�042Quicklyadapts from underground
to overhead pulls.
�042Versatile,will adapt to any pull.
Maxis Marksman
Conduit Layout Tool
�042Savetime, labor and money on
this easy to use conduit layout tool.
�04260times faster than using a
tape measure.
�042Fork.0.'s sizes 1/2" to 4".
�042Undergroundand overhead.
�042Featuresa panel schedule
showing the branch circuit number
to its corresponding color.
�042Constructedof tough durable
anodized aluminum.
�042Markingsare etched for
maximum durability.
�042Easyto use, no math.
P '5·,- . ·.:AC•.Jobsite'Supp/y Co. i.--
:.' •:J (619):295-6100 Phone
v -.......·.:) r..31.-9,= .. (619} 295*300 Fax. ' -,rt.- . ...
- .4/1--I --OJ. A.'. .J«. 7· I . <2
Underground Pull
.t#/4�036il'i ;
•0:u"*VIIAp.%49/1
TI •11,1-•
Overhead Pull
'Sh ., , -I: rh•
1 .- f lat.,
0 ,) 11 , r, p• 1 L. U / . Rt.* ;
..46*11 1 •,1 - -*1,6-t:• I, 1 ..7 1 yllillrEI ./--1 1 ///•al. ..1 ':... 1 W...
-: 1 ; I.S. *Li
··...,r«
Tight Closet Pull
1 I• 1"1 11--6
I' 81$ iii i'Jil• 'F' =114..//3
prj:8404: +A--e•,f=3...TW#' t.'B./.i . 61• :
'•0 )-3»
Anchor Under Locknut
.fl
V./.
fillilliliqlf,P;/."./
ti,-,•i/:ilmi42*k¥=•
Jobsite Supply
Side Pull
I: 1• 2-,up:li b .I
2 111 •II i./.Aili--1
1.......-I:-t.- .-..i:•//»I-.-/-/././--/Il
Maxis Speedset Conduit Tool
�042Four-in-oneconduit tool that
provides time and money saving
value in all your conduit work.
1. A Spacer
�042Speedsetis a 1 1/8" spacer.
2. Torpedo Level
�042Equippedwith magnetic sides for
easy leveling.
�042Levelyour conduit for perfect
vertical or horizontal lines.
�042Usefor leveling all your panel
placements.
3. Prevents Dog-Leg Bends
�042Helpprevent dog-leg bends.
�042Worksgreat in any situation and
will help in all of your conduit and
gear installations.
4. Bending Tool
�042Createrepeatable perfect bends
every time.
�042Willeasily attach to any 1/2", 34"
or 1" bender shoe.
�042Multipleconduit bends exactly
the same, every time without
comparing them to each other.
182
).'i: ·:2.41 11· ;. '· 7..." · .... A
* :7.. ..../.'.2.....0-:.uk.;:::.A.1•- 1 4..
.,.
5-'l +..,
t O.:.
y1%
K
9'.j 141 ,
.:..A'.161: 2 ,r.
14t
4
1-»,« . ... ..i.-1'.. -,- 1, ./ ...,ti•-·'«.«tl.i........t•t-=»««-I-I.*......*t .»•t=»»»«»_«�042»,••.»,•«.»«,»:..-'...-I...-Il. - •.. s. ••.'·•»...i. 71«.I " ».= Ill « -·....«.....4
.- .0' 1:,
-7.'* .
. t• •.I.
.1.1.*,Jobsitefabppig (ki." '•. 't• :=1.: -i 'i"I-%5:... It,&,-...
.,�042•36*·295461.00.Pho'lief - r# -- ··:4 E: 'Xt,2.- ..::
..T.3.: ..,.(619) 29516308:Faii·· . 63'-·5 i ., ..,:,7.:•9.. .,t'" f, . .....: ..,.
-- .elib.1.1,11 ...--LACE....1 ...•- li'_31.1,1•. , «2:Z....5.
JET L-90 Series
Hand Chain Hoists
JET JPN Series Lever Hoists
JET Cable Pullers
0*
0,
4'0.-Ee
.....11.13'' ·.S......,1,·
Stock,::'. M•del Capacit�0361.Standaid'.»Headroom Number, ' Load -'- Reg. Hand:'Number '.' ..· •· .· ( lbs.1 Lift' ' (in.1 ' of Falls- Chain Chainift}to
...If ·2.-, . . S (10·...-.. .. ..S· Idia/mml Littlout'j,, 1R·ton Had Chain Iloists101505 i.90.1nT·10 1,100 10 10-3/4 1 5 29101305 l-90-lnT-15 1,100 15 103/4 1 5 29101306 L-90-1/2T-20 1,100 20 10•3/4 1 5 29101307 L-90-1/2T-30 1.100 30 10-3/4 1 5 29
1.tanttabd Chainllo•sts101510 L-90·1T-10 2.200 10 11-3/4 1 6.3 50101310 L-90-1T-15 2,200 15 11·3/4 1 6.3 50101311 L·90-1T-20 2,200 20 11-3/4 1 63 50101312 L-90•1T-30 2.200 30 11·3/4 1 6.3 50
ittili-ioRtiATI th•IKHolits'101515 l-90-14/*10 3,520 10 13-1/4 1 7.1 60101315 L-90-140-15 3,520 15 13·1/4 1 7.1 60101316 L-90-1-1RT-20 3.520 20 13-1/4 1 7.1 60101317 L-90-1-1/2T-30 3,520 30 13-1/4 1 7.1 60
,12;iddilili•Chain H6166,• « •'
101520 L-90-2T-10 4.400 10 14-3/4 1 877101525 L-90-2;15 4,400 15 143/4 1 8 77101320 L·90-2T·20 4.400 20 14-3/4 1 8 77101321 l·90-2T-30 4.400 30 14-3/4 1 8 77
.3;tonliabid Chal,iltolits.' l'i101530 L·90-3•10 6,820 10 20-7/8 2 7.1 120101535 L-90-3T-15 6,820 15 20-7/8 2 7.1 120101330 l·90·3T·20 6.820 20 20,7/8 2 7.1 120101331 L-90-3T-30 · 6.820 30 20-7/8 2 7.1 120
•&Han,IChil#Holsts:..120 ' '": ·'''. '' · · ···". .' . ·.,-' « --'
101550 L-90-5T-10 11.000 10101555 L-90-ST·15 11,000 15101350 L-90-5T·20 11.000 20101351 L-90-ST-30 11.000 30
illaHSAil Chaintiotsts .'· -··· '-··.,·· ·.•·,. .·· -·- ..101560 L-90-1OT-11-1/222.000101565 L-90-1OT-20101566 l-90-10T-30
t 15-ton Hand Chain 1{oi,tsS/13101058 L-90-10T-20 33.000 20
*ian'*51 Cliatn Hoists '101090 L·90-2OT-20 44,000 20
Stack •' -Number
24-1/2 224-1/2 2241/2 2241/2 2
111/2 30-1/2 422000 20 30·1R 422000 30 30-1R 4
513/16 5
·,"M•del",· i • Rated ,-. . Standard Min Dist Numbe, . · Load Chain..1.:.. - -1.'.C:rc#:-=:12:.......mtri•.I ;•11$ ' (Dialmm)· ·
3.28 9-5/8 1 45 50 1 55 12-3/8 1 5.6
12-3/8 1 5.6
- 7.1
205625 JPN 25-3 1/4205650 JPN 505 1/2205675 JPN 75-5 3/4205676 JPN 75-15 3/4 15205615 JPN 150-5 11R 5 14-15/16 1205616 JPN-150-15 1.1/2 15 14-15/16 1205630 JPN·300-5 3 5 18-7/8 1205631 JPN-30015 3 15 18,7/8 1205660 JPN-600-5 6 5 23-7/8 2
Stock.Z.. Modal 6' Number.' . -
180410 JCP-1
180420 Je-2
180440 JCP-4 4
' Pounds Pull Ship : - .'Cartonto Ult ' , Weight : : Pack
... Capacity Eack Clb,&·1.)i''•'
59 23 · 19 · 29 1
106 100 1106 132 1106 198 1
. 41 •'Al#la•116 209 1116 242 1116 363 1
Uft Pei I . Lbipull Leve, ·' · . StilptiFull Turn.t : to Lift :."· Length ( in.) WLEli.
. lia·1 ' '·.�042"' Capacity '..." . 4.1..... ' (Ibll.:2-7/8 105 6-3/32 73-9/16 131 104/4 121-1/16 66 10-1/2 161-1/16 66 10-1/2 25
66 16-1/16 2566 16-1/16 35
16-1/18 4116.1/16 · ' 56
16-1/16 66
: Capa8ity , Lover Maximum' Lever.. Min. Distance, Ship.. ·i" Carton..(ton ) . 'Ratio Lift . Length Between . Weight. ·· Pack
Illl ( in.1 Hooks lin.)' Each (lbs.1
1 18:1 12 16-1/2 17 9 1
2 36:1 5 16-1/2 21 10 1
36:1 5· 17-1/8 22 15 1
Jobsite Supply
Jet
183
.... FS. :
1 A
2
59 32 159 48 1
/.69 29 169 35 169 40 1
4 .-J./.. 69 60 · 1
91 37 191 44 191 52 191 78 1
88 48 188 54 188 63 188 80 1
K % -....
B .88 56 188 62 1
i88 75 188 113 1
9 190 106 97 19 1909 1909 190
9 3859 3859 385
... ,-111 504 81 602 1
53-1/8 6 111 30 x 2 105 838 1
P
1-1/87.1 1-1/89.0 3/4 849.0 3/4 8490 3/8 84
1
.
1='-----=.«.=»=»==..... 'S ..... •=,t,»,-=- ..t"t,»�036,S==«S.-. . , I. I .' ...t.... . ..'....../-'. *......I..- .... ..,t'... 0...•........ .............
15., �042.... - ;:"4.... "...-:I•."'• ·',•jet k ..f:,s·· '.: '·»2':•'·'li:.'..8.. .2.-9.:-r."'•�042''li,+,,"...••f•:.EA ...,•E•-14.-I..t,V#'0.- . : . - ......f....6..
Ll.8.Fi,-• .--.....1._1,•:'18fit-: .•63'Litk-. ...,.- -.24L -.-,-:-..._.:L
- LAT '5.-.�0369-,2.:. 't\·, -:. 4/Ir\. Jobsite Supply Co. '9.'I
". ... . :,27 9.9. .'.. :,:•. ..4• (619)2295-6100 Phone • -7,
*. \::-......_,C..''f'' '::. '.-.. C..5·,C·631:'.5 :- (619) 295,-6300 Fax . =,t,
/ ' .._ ..n=L -.4%- -�036.3,-i ... ··· · · ....
JET JHJ Series Heavy-Duty Industrial Bottle Jacks
.•. 453322
•*/'Al.-A
• ' .£.i....•act'%"4.I= .1-=-7
453351( Mm - -,111.
JET Short Chassis Service Jacks
454223
JET J Series Pallet Trucks
Stock ModelNumber
Rated . Minimum PistonCapacity Height H6ight(tont .lin.) din.Ii,
2 7-1/8 4-1R453301 JHJ-2
453303 JHJ-3 3 7-1/2 4-1/2
453305 JHJ-5 5 7-7/8 4-5/8
453308 JHJ-8 8 7·7/8 4-5/8
453312 JHJ-121/2 12-1R 9-1 R 5.7/8
Head Maximum Base Ship CartonScrew Height Size Weight : Pack(11/in.1' lin.1 ([EW/in.1 ' Each ( lbs.)
2 13-5/El 4-1nx 2-1R 5 1
2-3/8 14-3/8 4-9/16 x 2-13/16 6 1
2-3/4 15-1/2 5-5/8 x 3-1/4 9 1
2-3/4 15-1/2 6 x 3-1R 13 1
3-1/8 1 8-1 R 6-1/2x 4-1/8 18 1
453317 JHJ-17 la 17-1/2 10-3/8 6-1/2 3-1/8 20
453322 JHJ-221R 22-1R 10-5/8 6-1/4
453335K JHJ-35 35
45336OK JHJ-60 60
453399K JHJ-100 100
11 6-1/4
12 6-3/4
12 5-23/32
16-7/8
Stock Model Capacity Minimum Maximum Saddle OverallNumber (tonl Height Height (dialin.1 Length
,· • .. limt . lin.1 ' . lin.} .-·. · . lin) ·''
454227 JSJ-2-1/4X 2-1/4 4-1/2 19-1/4 4-3/4 26-1/2
454223 JSJ-3X 3 4-1/2 21 5-1/8 26
�042Featuresautomatic safety overload bypass system.
�042FullSwivel, ball bearing rear casters are positioned
for best load distribution and optimal maneuvering.
�042"QuickLift" pump feature with no load.
�042Complieswith ANSI/ASME PALD-10 standards
Stock «1-: Model 3-*Dimensions (in.)Number - '- '' Wl WI' Ll 12 Hl
�0425,000pound capacity. 140083 PT-204&1 20-1/2 6
�042Highquality welded steel 140080 PT·2748J 27 6construction with a durable
powder coat finish.
�042Extrawide poly-over-steel steer A
wheels provide a smooth, quiet ride0,4
1.with added traction and stabilty.
�042Wheelbearings are double sealed
and lifetime lubricated.
JET Load Binders
.-
.
�042Drop-Forged,heat-treated alloy
steel construction.
�042Takeup slack and secure chain
around cargo in on operation.
�042Easy-to-usewith lever or ratchet
type handle and 360° swivel hooks.
�042Durablerust resistant powder
coat finish.
�042Complieswith US DOT regulations.
7-1/8 x 4-5/8
7-1/8 x 5-1/2
17-1/4 8-3/8 x 5-1/2 48
18-5/8 9-1/4 x 7-3/8 82
17-11/16 14-31/32 x 10-7/16 225
Overall Handle Ship CanonWidth Length ' Weight Packlin.) (in.) . Each (lbs.1
13·7/8 39-7/812pal 84 113 37·3/4 (2rc.1 90 1
Ship . CartonC Weight Pack
Each (Ibs.1
63 6-1/4 2-1/2 6-1/4 x 2·3/4 2.1R x 3-3/4 45-1/8 172 1
63 6-1/4 2-1/2 6-1/4 x 2-3/4 2-1/2 x 3-3/4 45-1/8 196 1
C•UMVA•"""•4 j-It
* =. r iIl..�036.H,
Stock' : Model ' ' ',MiiUMax.Number Chain Size
:(in.).
583246 LB-8 3/16-1/4583245 LB-19 5/16-3/8583247 LB-28 3/8-la
583248 RLB-19 5/16-3/8
-Handle . Take-UpLength ( in.1tin.1- · - * 3:1*511-7/8 2.3/415-3/4 4
18-la 414 8
Working Ship CartonLoad Weight PackLimit(lbil Each ( lbs.1
2.600 4 .15.400 9 19,200 12 1
184
).»
,· "·i ;1
24 1
28 1
1
1
1
0
454227
112 A B
:
Ailictlifecg
./
i 8 11
-.
5.400 11 1
....i,===»«-=».'. =.»="*.#.'::.:I.'.....=".=- - ="".="--"=. .....£.�042...-,--,-".-·--·..=........I.......4
Jobsite Supply
I .........I-=. '. .. . .. . . ... .. »......I-..'-=
... �036
...
..'.R'>'S=•:=W=' i ..; .: 2/0-75·, 2 -. -1
a\».Jobsite.Supply Co.'=Bt{619)295%100 Phohe
• ••1 4•'(91 9) 29*6§88 Falk
·-:'-.»iSi:'. '.•'..55-r ··:.·:··. ·*.I--#2•1.,12i.•."•,r ·_,*i*,*•:'31--9 - -* , _.
'i.:.4'..::.
. -,11:.
A-+Illi.
. ,- ... .... , "I :N ' ·· ..2. · -. it: 9
''2' ; -'3'ZO./. -- -"�042,'-'41 i I.,9 ,%4
.:.-:....· :f;:: A.......:.:6-&..:l'•.0-.- ' ,·····"--5..·•
Ml -AA-15 Core Rig
�042Ughtweight anchor drill rig.
�04215amp, 3.5 HR 800 RPM single
speed core bore motor.
�042Weighsjust 45 lbs.
�0426"bit capacity.
Premium Black Core Bit
�042IndustryStandard.
�042Highdiamond concentration gives
maximum footage and drilling
speed.
�042Usefor all types of wet drilling.
�042Goodin moderate to high steel
applications.
�042Choosefor your lowest drilling
cost
SER.cIFIGATIONSP33F - Hard AggregatePOL - General Purpose, Fast CuttingP64L - Asphalt/Block. Long Life
Jobsite Supply
f-t*T'·: B.,fr.. I
.
Diamilhd Coring·4:.2» :-.· ./
"· ... .14/. ....... . ..
M-4 Rig
�042Only35 lbs. (rig-20 lbs., motor-15 lbs.)
�0426"bit capacity (3" hand-held)
�042Convertsto hand-held drill motor.
�042Combinationstand quickly angles to 45°
�0423-speedhand-held drill motors with
overload clutches.
are available with choice of 110V electric,
220V electric, air or hydraulic power.
�042Mastcan rotate 360° on swivel stand.
�042Reversibleslide handle (use on left side
or right side of rig).
�042Highstrength, hard anodized, 11,2" x 2"
aluminum column.
�0424adjustable slide bearings provide
superior carriage.rigidty.
�042Carriagelock.
*t#.litj./-/,-Il.---.-..•Ill..•1.-/--'t-ir ir-4.Ii'fl... I.
"«- . ..... - -......... ....... -.- .............3
185
, •:I•..''S.:•'.,
-
e *
D '9.
4 4
N'...
3 'I, leE-)
P
7#
*1imwf
./
17*.Pff#UY"DkabilumpUMOKPOL P33F P64L
SIZE Cat No. Cat No. Cat No.1/2* 05826 05820 285855/8" 05917 05912 285863/4. 05962 05957 285877/8' 06004 05998 251151�042 05293 05286 198711-1/8' 05338 23309 285881-1/4' 05381 05373 220031-3/8· 05404 05399 285891-1/2' 05441 05427 054381-5/8' 05472 18689 285941-3/4' 05483 05476 285951-7/8' 05509 28580 285962�042 05529 05516 055252-1/4" 05571 05565 237712-1/2* 05607 05596 285972414* 05629 28581 285983�042 05661 05643 212463-1M' 05688 26748 056863-1/2' 05709 22306 285994�042 05761 05742 057534-1/4' 05791 05782 057884-1/2* 05805 28582 231735' 05843 05831 245805-1/2* 05867 27102 286006�042 05892 20265 058866-1/4. 05921 05919 286016-1/2' 05927 28583 286027�042 05945 26932 286038�042 05984 05969 059809. 06013 28584 2860410' 05306 27971 2860512' 05361 05351 0535914" 05417 05412 2860616' 05462 26250 2860718" 05498 26254 0549620' 05536 26258 2860824' 05584 26262 05583
I . .. ...t:.. :.,-ri
.9/1,
1,1.-- f, r': '
<1 4 : ff i :. .1 ,:�036':-..�036....1 .
:7 . gii.:./.....7.....
../:4.. . ...5 5,:,i , ..t,
,-.-*--............ .'.
Lase<Ar...1 2:1:.:. '.
--:02...r..1-. ,
-/.4-*-7/•.r•./ .
I ........». '. &;£�036. 1
..3/ .C
« .7-.:/ r :.il '
1..... : PLS' '-'*----'.-1 ....... 4--
- $ ..'·*
1--- -52. - 31..,.,
' /1
A. "S, 1
i'(=..... -1.- f '· 5
7': & 4,st,./
-i.
7:· N .5 Z (25 i
* 4-4--. -I. ..
3
4- -1 1
3
l/
. [Il f>•.
....
-•Su:Wr4•11- ----· . ilef= 1-1.5>JJA----
'»/
' S.. :/ 2\,Jobsite Supilly Co. :;,
- -.....' ,•·(619) 295.-6100 Phone :
.:.... •-..9.-,2•t:*. ..' (619) 295,6300 Fax
PLS 1 Professional Distance Measuring Tool
�042Measuredistance, area, square footage, height; add, subtract, multiply,
take continuous trace measurements and time-delayed readings.
�042Designedfor indoor and outdoor applications.
�042Quicklyestimate building material requirements.
�042Savetime and money on every job site.
�042Measurefrom critical areas without endangering your crew.
�042Measurestructural beams, roof ridges, skylights, headers and more.
PLS 2 Plumb, Level and Square Hand Held Laser Line Tool
�042Checkexisting conditions before you submit your bid!
�042Layout all your alignment tasks with the PLS2 in the palm of your hand.
�042Compatiblewith your camera tripod.
�042Fast,accurate and portable, saves you time and money when your
bubble vial or rotary laser is too cumbersome for the job.�042Magnetic Wall Bracket
�042Carrying Pouch
PLS 3 Point-To-Point Alignment Information Tool
�042Layout reference points faster than traditional, labor intensive methods.
�042Nomore 3-4-5, swinging plumb bobs, Plumb instantly from floor to ceil-
ing or from 50 feet off the ground!
�042Self-leveling:no time wasted with bubble vials, tum it on and go to work.
�042Takeclear, stable reference points indoors and outdoors.
�042Includes Wall Bracket, Carrying Pouch and Floor Stand.
PLS 5 Point-To-Point Alignment Information Tool
�042Layout reference points faster than traditional, labor intensive methods.
�042Nomore 3-4-5, swinging plumb bobs, Plumb instantly from floor to ceil-
ing or from 50 feet off the ground!
�042Self-leveling:no time wasted with bubble vials, tum it on and go to work.
�042Takeclear, stable reference points indoors and outdoors.
�042Includes Pendulum Layout Target, Magnetic Wall Bracket Compact
Carrying Case and Floor Stand.
PLS 5X Professional Exterior Alignment Tool
�042Measuredistance, area, square footage, height; add, subtract, multiply,
take continuous trace measurements and time-delayed readings.
�042Designedfor indoor and outdoor applications.
�042Quicklyestimate building material requirements.
�042Savetime and money on every job site.
�042Measurefrom critical areas without endangering your crew.
�042Measurestructural beams, roof ridges, skylights, headers and more.
Jobsite Supply
..3 : ·'3:. I· 7*:- ..·S:
.# - .=..S'. -2ZA,....4 S -
*
i
:.,�2543 \ /
11»'«,-'=....�036=..'.===�036.='.,==,»"»•'.==
186
0
\ l\ /
00
..=«=S�036,'=«.,»'.,5,=»S,a.»,«»,t,».«�036=»«»�036»l/»«.�036»=,al#Ifm'==»'»»,/=pr=,==/4,1=�0364=,- ...-S. . - t ..«...»-* //Ii»==,=.«=='�036=.=,»�0368,'.S-'.,�036."t'.,�036...«'. . "=1='==*,1-1
I\N.JgbsiteiSupply Co.
t..&:3919)295®Do. Phone -
,- , \1 -4.e .,. -i(619) 29516300.Faic....=-- 12·...... , . �042X, .''
-.2..6348;L.i. -.•kE-- -,--22
..'.· · ' 1.:'
- 1 -A I .7 -*.-/45 «* ,:2, 3:- . . pi•* • Lasers .
·•--�036«i»«_-11,:6....,1-611-�036.••'- ••,--1.•·.:..._i:•:.24<--1 --f--
-.
13:274 1--- . ,:=*='.,,
DeWAlI Lazor Tripod p
/ 11�042Foruse with the DeWalt :U
Self Leveling Rotary Lazer. f il•B
11
/4%'RT7610-5 --· _ 1
i .'.,RT7610-3
.19
./4,A/'llit=>.1
2•' 4
e•lilillilill#Al EM
t•lilli://a---i»- - I. ..t. i
i-alall.•..i--
7.P-.•:i:"./.-
RT7610-5 5 Beam Level
RT7610-3 3 Beam Level
DW077KD DeWALI Self Leveling Rotary Lazer Combo Kit
�042Fullyautomatic horizontal & vertical self leveling with out-of-level shutoff eliminates
user error, ensures accuracy, and reduces set up time.
�042Multi-voltageadapter accepts all DEWAlJ batteries 9.6V - 18V.
�042Protectedrotary head & weatherproof design deliver interior & exterior durability.
�042Bright,sharp, high power beam delivers maximum visibility, even over long distances.
�042Remotecontrol operated scan mode creates a "laser chalkline" between two points
for an extremely bright beam over long distances.
�042Wireless(IR) remote control operation so that one person can setup and aim the laser
over long distances.
�042Detectordetects rotary laser beam over long distances or in bright light conditions.
Includes:
�042Self-levelingrotary laser.
�042Digitallaser detector.
�042Wallmount.
�042Wireless(IR) remote control.
�04218VXR+�442battery.
�0421hour charger w/ tune-up mode.
�042Lasertarget card.
�042Laserenhancement glasses.
�042Heavy-dutykit box (w/ padded interior).
Specifications:
�042PowerSupply: 9.6V-18V Batteries.
�042Accuracyat 100 ft: 1/8 in.
�042RotationSpeed: 0,10,60,250,800 rpm.
�042Self-LevelingRange: +5 °
�042IndoorVisibility Range: 200 (dia) ft.
�042Rangewith Detector: 2000 (dia) fL
�042LaserClass: Illa (<5mW) @ 635nm
�042ToolWeight: 5.5 lbs.
�042ShippingWeight: 15 lbs.
�04290° beams provide simultaneous level, plumb and square reference points.
�042Allbeams originate from the same source guaranteeing superior accuracy and repeatability.
�042AutomaticLeveling mechanism reduces set up, guarantees accurate repeatable transfer of points to locations.
�042AutomaticOut of Level Sensing: Visual (blinking laser beam) out of level indication signals if the unit is out of level
after initial set up, eliminates tool status checks and costly errors saving time and money.
�042Alwayson the Job: Users can easily recalibrate the tool keeping it on the job and not in the shop,simply follow the
instructions in the manual and with a few twists of a flat head screwdriver the tool is ready to go!
�042MultipurposeAttachment Accessory: Attachment accessory with strong magnets, tripod mounts and straps allow
for attachment of the tool to a variety of different surfaces including metal studs, wooden beams and tripods.
�042FieldRecalibration: Guarantees performance to specification keeping tool on the jobsite to save time and money.
LL200 Spectra Precision Laser
�042Easyto use, and all in one carrying case; an ideal solution for the small contractor.
�042Includes:laser, tripod, receiver and rod.
�042Simpleto use, makes one-person leveling as easy as possible.
�042Fastand accurate, will pay for itself in labor savings before you need to change the single D cell battery.
�042Applications:forms, footings and foundations (residential jobs), septic tank or swimming pool installations,
estimating cut and fill, decks and terraces.
�042Features:transmitter, receiver, rod, and tripod in one rugged carry case, runs 100 hours on one D-cell battery,
�042Onemoving part, if something goes wrong, there is a next day replacement policy (US only).
LL500 Spectra Precision Laser
�042Reliablelifelong accuracy and stability.
�042One-personleveling system designed for the most rugged environment
�042Accurate,stable and reliable, ideal for long range measurements across your entire site.
�042Comescomplete with a hand held or rod-mounted receiver and is also compatible with machine control receivers.
�042Applications:elevations, setting concrete forms (small and large jobs), checking foundations, digging footings.
�042Features:rugged, proven design, stable accuracy, machine control compatible.
Jobsite Supply 187
: 11....=..'-. 'ii..':C... 0,3.-3 . 2
..9..: ::.r. 9, 9.:. . ....
�036 .--,
-P
emi
P..../.. ...£ ..• ..............#.»,1............;.... ' .'-. K... .=».& «.--...&»»,i,.. i.-,�042.·.-«»»i....«,I··»..· S-.», ...<-I»«* *I=.· , , .t.../.-•-«.•
Top Related