www.incledon.co.za
DPI TradingDPI Trading
www.dpitrading.co.za
PROUDLY IMPORTED BY
PLASTICA ALFA
Compression
Fittings
&
Pipe Saddles
For use
with
Polyethylene
Pipe
PRODUCT CATALOGUE
SANS 14236 & 1808-44
Technical Information
Assembly Instructions
PLASTICA ALFA
Compression Fittings
PN 16 for fittings from Ø 16 mm to 110mm SANS 14236 (ISO 14236)PN 10 for fittings with 3" and 4" female threads.
Body: black polypropylene (PP)Nut: blue polypropylene (PP)O-ring: nitrile rubber 70 Shore (NBR)Cliching ring: acetal resin 9(POM)Reinforcing ring: stainless steel “AISI 430"
(Maximum working pressure at the temperature of 20ºC.)
Special pieces suitable for the conveyance of drinking water, wine,drinks and alimentary fluids according to the applicable regulations in Italy and other countries.
The BLACK LINE compression fittings are in conformity with the standard UNI 9561, uni 9562, uni en 712-713-715, uni iso 7/1 and ISO 14236, AND SANS 14236
SANS 14236 & 1808-44
1
Coupling
Reducing Coupling
PLASTICA ALFA
Male Adaptor
16x½”
16x¾”
20x½”
20x¾”
25x½”
25x¾”
32x¾”
32x1¼”
40x1¼”
40x1½”
50x1½”
63x1½”
63x2½”
75x2½”
75x2"
75x3"
90x2"
90x3"
90x4"
110x3"
110x4"
Product Catalogue
* Dimensions all in mm
SANS 14236 & 1808-44
400600400601400602400603400604400605400606400607400608400605
Code
400630
400635
400640
400641
400646
400652
400655
400656
400657
400660
400661
400662
400665
400666
400670
400671
400636
Code
Code
400100
400101
400106
400107
400112
400113
400114
400121
400122
400123
400127
400128
400129
400136
400138
400148
400144
400146
400154
400156
400158
400162
400165
400168
400177
400180
* Also available in 50 x 32mm
* Also available in 50 x 1¼” 65 x 1¼
2
Female Adaptor
16x½”
16x¾”
20x½”
20x¾”
25x½”
25x¾”
32x¾”
40x1¼”
40x1½”
50x1¼”
50x1½”
75x2½”
PLASTICA ALFA
End Cap
90º Elbow
Product Catalogue
* Dimensions all in mm
SANS 14236 & 1808-44
400000
400001
400006
400007
400012
400013
400014
400021
400022
400027
400028
400029
400035
400036
400038
400046
400054
400056
400065
400077
400080
Code
Code
Code
401400
401401
401402
401403
401404
401405
401406
401407
401408
401409
401000
401001
401002
401003
401004
401005
401006
401007
401008
401009
** Reduced pressure PN 10
* Also available in 90 x 4"
3
*
*
90º Male Threaded Elbow
PLASTICA ALFA
16x½”
16x¾”
20x½”
20x¾”
25x¾”
32x¾”
40x1¼”
50x1½”
75x2½”
90º Female Threaded Elbow
Product Catalogue
* Dimensions all in mm
32x1¼”
32x¾”
25x¾”
25x½”
20x¾”
20x½”
16x½”
40x1¼”
40x1½”
50x1¼”
50x1½”
63x1½”
63x2½”
75x2½”
SANS 14236 & 1808-44
401200
401205
401206
401210
401211
401212
401216
401217
401218
401225
401226
401227
401235
401236
401238
401245
401247
401250
401255
401257
401259
401265
401269
401280
Code
Code
401030
401031
401035
401036
401041
401042
401046
401047
401055
401056
401066
401077
401085
401087
401095
401105
401110
* Reduced pressure PN 10
* Also available in 25 x ½” 50 x 2" 63 x 1½”
*
4
*
*
45º Elbow
45º Male Threaded Elbow
45º Female Threaded Elbow
PLASTICA ALFAProduct Catalogue
* Dimensions all in mm
SANS 14236 & 1808-44
Code
Code
Code
400900
400901
400800
400850
400851
5
90º Tee
90º Reducing Tee
PLASTICA ALFA
16x½”
16x¾”
20x½”
20x¾”
25x½”
25x¾”
32x¾”
40x1¼”
40x1½”
50x1½”
75x2½”
63x2½”
75x3"
90x4"
90º Male Threaded Tee
Product Catalogue
* Dimensions all in mm
SANS 14236 & 1808-44
401900
401901
401902
401903
401904
401905
401906
401907
401908
401909
Code
402255
402260
402265
402270
402271
402275
402280
402285
402290
Code
Code
402100
402105
402106
402111
402112
402116
402117
402135
402136
402137
402146
402148
402157
402156
402165
402167
402169
402175
402180
402185
402190
****
** Available on request
**
**
** Available on request
6
90º Female Threaded Tee
PLASTICA ALFA
Nut
Product Catalogue
* Dimensions all in mm
16x½”
16x¾”
20x½”
20x¾”
25x¾”
32x¾”
40x1½”
50x1½”
63x2½”
75x2½”
40x1¼”
SANS 14236 & 1808-44
Code
Code
401929
401930
401931
401936
401937
401941
401942
401950
401951
401952
401961
401973
401985
401987
401989
401995
402010
402020
401975
**
** Available on request* Reduced pressure PN10
*
*Also available25 x ½”50 x 1¼”90 x 4"
7
*
*
D
L
L1H
d d1 F
Flange Adaptor
Code D L L1 H d d1 F
400300 50 x 1½” 91 163 114 17.5 58.5 89.5 152
400302 50 x 2" 99 163 114 17.5 77.0 103.0 165
400310 63 x 2" 99 183 95 17.5 77.0 103.0 165
400320 75 x 2" x ½” 118 185 113 17.5 88.0 122.0 185
400321 90 x 3" 144 197 141 20.0 108.0 138.0 200
400330 90 x 4" 169 177 141 24.0 131.0 158.0 220
440430 110 x 4" 169 225 167 24.0 131.0 158.0 220
Thrust Ring
O’Ring
Clinching Ring
PLASTICA ALFAProduct Catalogue
* Dimensions all in mm
SANS 14236 & 1808-44
8
Technical Information
1. After locating the site, prepare theclamp saddle, the bolts and the o’ring
2. Position the saddle lower part on the pipe
3. After inserting the o’ring in its proper seat, position the saddle upper part and start screwing the bolts.
4. Screw the bolts with a key to make the saddle adhere to the pipe.
5. Drill the pipe perpendicularly. The threaded part is ready to be connected.
Assembly Instructions
Clamp Saddles
PLASTICA ALFA
10 BAR without reinforcing ring ø 20÷ ø 315mm16 BAR with reinforcing ring : ø 20 ÷ ø 6312.5 BAR with reinforcing ring ø 75 ÷ ø 315(maximum working pressure at the temperature of 20ºC)
CLAMP SADDLEBody: black polypropyleneGaskets: nitrile rubber 70 Shore (NBR)Bolts: galvanized steelReinforcing ring: stainless steel “AISI 430"
POLYPROPYLENE 100ºC
Special qualified pieces to the conveyance of drinking water and alimentary fluids.
The Clamp saddles are in conformity with the standard UNI EN ISO 13460 e UNI EN 10226/1, ANSI/ASME B1.20.1For PE pipes in conformity with the standard UNI 7990, INI EN 12201 - 2 - UNI EN ISO 15494/ SANS 1808-44
SANS 14236 & 1808-44
9
Clamp Saddle for PE and PVC Pipes
25 x ½”25 x ¾”32 x ½”32 x ¾”32 x 1"40 x ½”40 x ¾”40 x 1"50 x ½”50 x ¾”50 x 1"50 x 1¼”63 x ½”63 x ¾”60 x 1"63 x 1¼”63 x 1½”75 x ½”75 x ¾”75 x 1"75 x 1¼”75 x 1½”75 x 2"90 x ½”90 x ¾”90 x 1"90 x 1¼”90 x 1½”90 x 2"110 x ½”110 x ¾”110 x 1"110 x 1¼”110 x 1½”110 x 2"110 x 2½”110 x 3"125 x ¾”125 x 1"125 x 1¼”125 x 1½”125 x 2"125 x 2½”140 x 1"140 x 1¼”140 x 1½”140 x 2"140 x 3"160 x ½”160 x ¾”160 x 1"160 x 1¼”160 x 1½”160 x 2"160 x 3"160 x 4"200 x ¾”200 x 1"200 x 1¼”200 x 1½”200 x 2"200 x 3"200 x 4"225 x ½”225 x ¾”225 x 1"225 x 1¼”225 x 1½”225 x 2"225 x 3"225 x 4"250 x 1"250 x 1¼”250 x 1½”250 x 2"250 x 3"250 x 4"315 x 1"315 x 1¼”315 x 1½”315 x 2"315 x 3"315 x 4"
without reinforcing ring
with reinforcing ring
PLASTICA ALFAProduct Catalogue
No.Bolts
Sizeof Bolts
O-RingSize
WeightMass
Grams
* Dimensions all in mm
A
B
SANS 14236 & 1808-44
Code
117598117716117600117601117602117717117605117606117174117175117176117192117179117180117181117620117619117400117182117183117622117621117193117177117184117185117623117625117624117188117186117187117190117189117191117718117603117401117402117403117404117405
117406117407
117719
117408117409117720
117195117410117411117194117616117721
117197117300117412117198117617117618
117722117723117724117725117726117727117199117728117413117196117729117730117731117732117733117734117735117736
117122116116117123124123130135140139248250260252250287297301305307301347339348340342365443450449458454475480480463449475475470475817814814877866865865865875887875908969
206520652030213520352073208021602160216027122164219722282220271227122712271327502765400540104020405040654125
117245117615
117268117269
117261
10
PLASTICA ALFASANS 14236 & 1808-44
DISCLAIMERWhilst every care was taken in compiling this data, information and related material contained herein are subject to change without notification. All detail that this document contains are provided in good faith and therefore no representation or warranty whatsoever regarding the completeness, accuracy, “up to date”, or adequacy of, suitability, functionality, ommission, or operation is specifically disclaimed of any liability for direct, indirect or consequential loss or damage, however so arising, from the use or reliance on information herein thereafter provided.
INCLEDONGERMISTON Tel: 011 323 0800
KLERKSDORP Tel: 018 462 0009
BLOEMFONTEIN Tel: 051 408 9200 KATHU Tel: 053 723 2213
NELSPRUIT Tel: 013 752 3121
SECUNDA Tel: 017 631 4200
EAST LONDON Tel: 043 736 6022 PORT ELIZABETH Tel: 041 409 8000DURBAN Tel: 031 716 2200
POLOKWANE Tel: 015 292 8660LEPHALALE Tel: 014 763 5824
BURGERSFORT Tel: 013 231 7224
DPI TRADING (Western Cape)CAPE TOWN Tel: 021 957 5600 GEORGE Tel: 044 874 2327
WELKOM Tel: 057 396 1131RUSTENBURG Tel: 014 591 7700 UPINGTON Tel: 054 332 1089
Top Related