8/13/2019 Plan Stage Omar Ibrahim 10D
1/38
8/13/2019 Plan Stage Omar Ibrahim 10D
2/38
Omar Ibrahim 22/11/2013
10D
should now
open up.
Adjust the
placement of
the Sun inBryce.
Bryce 7.1
Pro.
Go to the
Sky and
Fog menu onthe top
toolbar of
Bryce. Go to
the last
choice on
the Sky and
Fog menu
(the black
rolling ball).Move it
around and
see where
you want it
to light up.
The bright,
lighted-up
part of the
ballrepresents
where the
Sun is
placed. Click
on the
rendering
green button
(green
sphere) in
the bottom
of the left
toolbar on
Bryce. It is
the middle
green ball,
between the
total five
green
Creating
this step
will makethe
animation
video more
realistic,
alive,
attractive,
and
detailed,
which willgrab the
audiences
attention
to the
video.
20s
8/13/2019 Plan Stage Omar Ibrahim 10D
3/38
Omar Ibrahim 22/11/2013
10D
spheres. Play
with the
lighting, and
see where
you want itto be. (Note:
if you want
to, you can
change the
Sun into a
moon, by
clicking the
small yellow
circle nextto the rolling
black sphere,
and when you
do so, the
Sun becomes
a moon. For
visual
demonstrati
on, watchthe following
video from
4:39 to 5:35:
https://www.
youtube.com
/watch?v=ZP
qmJ7MX36
Q
Add a sky of
your own choice
to the video.
Bryce 7.1
Pro.
Go to the
Sky and
Fog menu on
the top
toolbar of
the program
(next to
Create and
Edit). Click
on the arrow
2mins.
https://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Q8/13/2019 Plan Stage Omar Ibrahim 10D
4/38
Omar Ibrahim 22/11/2013
10D
next to the
words Sky
and Fog and
choose the
design youwant. When
you choose
it, click on
the tick
mark on the
bottom right
corner of
the Sky and
Fog section.For visual
demonstrati
on, go to the
following
video, but
skip to 3:49
and watch
till 5:14:
https://www.youtube.com
/watch?v=ZP
qmJ7MX36
Q
Create buildings
to represent a
city.
Bryce 7.1
Pro and
Photoshop
CS6.
Go to
Photoshop
CS6. Click
File, New
on the
Photoshop
toolbar, and
set the size
of the image.
Change the
resolution to
512
pixels/inches
. Click Ok
This step is
important
because it
adds
details to
the overall
video and
makes it
more
realistic
and precise.
10 mins.
https://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Q8/13/2019 Plan Stage Omar Ibrahim 10D
5/38
Omar Ibrahim 22/11/2013
10D
on the top
right corner.
Click on the
brush tool in
the mid-section of
the left
toolbar. The
top toolbar
will change.
Go to the
top toolbar
and click on
the downarrow next
to the brush
shape and
size (on the
left side of
the top
toolbar). A
list with
variousbrushes will
pop up. Go to
the down
arrow next
to the
cogwheel on
the top right
corner of
the pop-up.
A new list
will appear.
Go to the
bottom
section of
the list, and
click on
Square
Brushes,
8/13/2019 Plan Stage Omar Ibrahim 10D
6/38
Omar Ibrahim 22/11/2013
10D
and click
OK when
asked to
switch to
squarebrushes.
Now, all
brushes are
square.
Create an
eagle-eye
view of the
buildings, by
simplyplacing
squares on
the space
provided. If
the squares
get whiter,
this means
that the
buildingsthere are
higher. If
they get
blacker or
greyer, the
buildings are
lower. This
will be your
city, so make
sure to place
a lot of
squares, to
have many
buildings.
After youre
done, go to
Bryce 7.1
Pro, and
8/13/2019 Plan Stage Omar Ibrahim 10D
7/38
Omar Ibrahim 22/11/2013
10D
create a
mountain in
the left side
of the top
toolbar inthe program.
Go to E in
the bottom
of the right
list next to
the mountain
created (E
stands for
Edit). Aneagle-eye
view of the
mountain will
appear, with
a side view
on the right
and an
editing list
full ofediting tools.
To the left
of the view,
there is a
list of tools
to use. Go to
the very
bottom
button, that
looks like a
grid. It will
show you the
current
resolution of
the image,
and gives you
other
resolution
8/13/2019 Plan Stage Omar Ibrahim 10D
8/38
Omar Ibrahim 22/11/2013
10D
choices to
select for
the image.
Choose
512, sothat it
matches the
resolution of
the
Photoshop
squares. Now
go to the
bottom right
list of thescreen,
which is the
Editing
Tools list.
In this list,
go to
Pictures on
the top right
of it, andthen go to
the first
picture on
the left,
which shows
the mountain
from above.
Above that
image, there
a button
that says
Load. Click
it, and you
will get a
pop-up that
allows you to
insert or
load any
8/13/2019 Plan Stage Omar Ibrahim 10D
9/38
Omar Ibrahim 22/11/2013
10D
pictures you
have in your
computer,
and this is
where youwill load your
Photoshop
city, to
replace the
mountain.
When you
click on the
Load
button,simply
choose the
Photoshop
city file, but
make sure
that it is
saved as JPG
(you can do
this byclicking
Save as
and changing
the file
format from
.psd to
.jpg, when
creating the
Photoshop
city). Click
Open on
the bottom
right corner,
after
choosing the
Photoshop
file. Now,
under the
8/13/2019 Plan Stage Omar Ibrahim 10D
10/38
Omar Ibrahim 22/11/2013
10D
image of the
city in the
editing tools
section,
there arebuttons that
say copy
and paste.
Click on
copy and
paste the
image of the
city onto the
two otherimages next
to it, by
clicking
Paste on
them. To
give the city
a more
realistic and
detailedfeeling, go to
Edit on the
top toolbar
of Bryce,
and choose
whatever
theme you
want, that
would make
the city look
more
interesting
and realistic
(Ex: Go to
Miscellaneo
us, and then
go to
Bladerunner
8/13/2019 Plan Stage Omar Ibrahim 10D
11/38
Omar Ibrahim 22/11/2013
10D
City Map).
Once you
choose your
design, click
the tickmark on the
bottom right
corner of
the Edit
section. The
city is ready.
For visual
demonstrati
on, visit thisvideo:
https://www.
youtube.com
/watch?v=ZP
qmJ7MX36
Q
Create a ground
for the video.
Bryce 7.1
Pro
Click on the
ground in
Bryce. Go tothe Edit
menu in the
top toolbar
of the
program, and
choose
whatever
design you
want from
there. (Ex:
Go to
Miscellaneo
us, and then
go to
Organic
City Map).
Once you
choose your
This step is
important
because itmakes the
video more
realistic
and
attractive
and
detailed,
which
attracts
the
audience
and makes
the video
professiona
l and
successful.
1 min.
https://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Q8/13/2019 Plan Stage Omar Ibrahim 10D
12/38
Omar Ibrahim 22/11/2013
10D
design, click
the tick
mark on the
bottom right
corner ofthe Edit
section.
For visual
demonstrati
on, visit this
video and
skip to 3:26
to 3:50:
https://www.youtube.com
/watch?v=ZP
qmJ7MX36
Q
Create the
flying car.
Bryce 7.1
Pro
Archive
3DWebsite
(NOTE: I
didnt find
any tutorials
addressing
this, but Imguessing this
is how it can
be done).
Import an
image of a
regular car
from the
following
website
http://archi
ve3d.net/
Go to People
and Related
Ware
section on
the right
hand corner
of the
This step is
important
because
the flying
car is oneof the
important
future
transportat
ion
methods
that I want
to show in
my video,
and if it is
not there,
the video is
less
powerful.
6m.
https://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttp://archive3d.net/http://archive3d.net/http://archive3d.net/http://archive3d.net/http://archive3d.net/https://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Qhttps://www.youtube.com/watch?v=ZPqmJ7MX36Q8/13/2019 Plan Stage Omar Ibrahim 10D
13/38
Omar Ibrahim 22/11/2013
10D
website, and
choose Land
Transport.
Select a
design fromthe many
available,
and click on
it. Make sure
that it looks
modern and
futuristic,
not old or
usual. Afterclicking on it,
you will be
redirected
to a page
that shows
you a close-
up version of
it, with some
informationon the right,
and a
download
button at
the bottom,
along with
another
button that
allows you to
add the 3d
model. Click
the download
button, and
after it is
downloaded,
go to Bryce.
Go to File
and then
8/13/2019 Plan Stage Omar Ibrahim 10D
14/38
Omar Ibrahim 22/11/2013
10D
Import
Object,
found on the
top toolbar
of theprogram, and
from there,
a pop-up will
appear,
allowing you
to choose
the file of
the car and
importing it.When you
choose the
file, click
Open on
the bottom
right corner
of the pop-
up, and the
car shouldbe in Bryce
now. Do the
same with an
airplane, and
grab the
model from
the same
website, but
this time,
instead of
going to
Land
Transport
on the
website, go
to Aircraft
and Space,
which is
8/13/2019 Plan Stage Omar Ibrahim 10D
15/38
Omar Ibrahim 22/11/2013
10D
right above
Land
Transport.
Choose your
model and dothe same,
and import it
into Bryce.
Now, select
the airplane,
and click on
the U
letter on the
bottom ofthe right list
next to the
airplane (U
stands for
Ungroup).
Now, select
the body of
the airplane,
and delete itby the
backspace
button on
the
keyboard.
Now, the
wings of the
airplane are
left. Select
them and
drag them to
the sides of
the car, and
group them
together
with the car,
using the G
button on
8/13/2019 Plan Stage Omar Ibrahim 10D
16/38
Omar Ibrahim 22/11/2013
10D
the bottom
of the right
list next to
the shapes,
and at thatpoint, the
wings should
be
connected to
the car.
(Again, I
didnt find
ANY
tutorialsonline for
this, but I
think this is
how it is
done, and if
it is not, I
will play with
Bryce in the
createstage, and
see how I
can finish
this step).
Animate the
flying car so
that it actually
flies in the air.
Bryce 7.1
Pro
Go to the
video
slider/cursor
at the
bottom of
the program.
Click it, and
keep it
moving till
whenever
you want it
to stop (this
is going to
be the
This step is
important
because if
the flying
car doesnt
move at all
and just
remains in
its position,
the video
wont be
realistic, it
wont be
interesting,
3m
8/13/2019 Plan Stage Omar Ibrahim 10D
17/38
Omar Ibrahim 22/11/2013
10D
duration of
the
movement of
the flying
car). Onceyou want to
stop it,
simply click
on it or on
the long
indicator it
travels
through.
Now, selectthe flying
car, by
clicking it,
and from
there, move
it to
wherever
you want it
to be, bysimply
holding and
moving it
around, and
also, if you
want it to
spin or
rotate or
create any
circular
motions, go
to the Edit
menu on the
top toolbar
of the
program, and
choose the
third shape
it wont be
attractive,
and the
flying car
will be nolonger
flying, and
so, the
video
wouldnt
have any
futuristic
movements
or touchesto it.
8/13/2019 Plan Stage Omar Ibrahim 10D
18/38
Omar Ibrahim 22/11/2013
10D
on the list,
which is the
cube with
the orbits
around it.Hold it, and
drag around
to the left,
right, up, or
down, to
create
motion for
the flying
car. Whenyou move the
video
indicator to
0 again, and
you play the
video, the
car will go
through the
movementsyou created
for it.
Create a human
being.
Bryce 7.1
Pro.
Archive
3D
Website
Go to
http://archi
ve3d.net/
Go to the
People and
Related
Ware
section, and
go to People
and Body
Parts
section.
Choose a
man or a
woman from
the many
This step is
important
because
the person
will be
riding one
of the
future
transportat
ion
methods,
which is the
flying
board, and
so, for the
video to be
1m
http://archive3d.net/http://archive3d.net/http://archive3d.net/http://archive3d.net/http://archive3d.net/8/13/2019 Plan Stage Omar Ibrahim 10D
19/38
Omar Ibrahim 22/11/2013
10D
designs, and
click on it. A
new page will
pop-up,
which willallow you to
see the
design up
close and will
allow you to
download it,
by clicking
the download
button onthe bottom
of that page.
Go to Bryce,
click File
and then
Import
Object
which can be
found on theleft corner
of the top
toolbar of
the program,
and now,
choose the
human file
from your
computer,
and click
Open to
place in
Bryce. The
person
should now
be on the
program.
detailed
and
realistic,
there has
to be ahuman
controlling
the board.
Create a flying Bryce 7.1 Search This step is 1m
8/13/2019 Plan Stage Omar Ibrahim 10D
20/38
Omar Ibrahim 22/11/2013
10D
board. Pro.
Images.
future
skateboard
on Google.
Choose your
own design.Right click
the image,
and click
Save As.
Save the
image as
.jpg. Go to
Bryce, and
go to Fileand then
Import
Object in
the left
corner of
the top
toolbar of
the program,
and selectthe design,
and click
Open once
it is chosen.
The board
should now
be in the
program.
important
because
the future
flying
board isone of my
future
transportat
ion
methods
addressed
in the
video, and
so, I needto include
it, in
addition to
that if
there was
only a
human
floating
without aboard
under
him/her,
the video
would be
weird and
not
complete,
which will
push the
audience
away from
it.
Place the human
on the board.
Bryce 7.1
Pro.
Click on the
human and
drag him/her
so that
he/she is on
This step is
important
because if
one of
these
10s
8/13/2019 Plan Stage Omar Ibrahim 10D
21/38
Omar Ibrahim 22/11/2013
10D
the board. aspects
wasnt
found, the
human or
the board,the video
would not
be
complete,
because if
the human
wasnt
found, the
board wouldbe
unrealistic,
since it will
operate by
itself, and
if there
was no
board, the
humanwould be
floating,
and the
video would
be weird
and
unrealistic.
Animate the
human and the
skateboard and
make them
travel and fly in
the air.
Bryce 7.1
Pro.
Go to the
video
slider/cursor
at the
bottom of
the program.
Click it, and
keep it
moving till
whenever
you want it
This step is
important
because if
the board
and the
human were
just sitting
there, the
video would
be boring,
not
4.5m
8/13/2019 Plan Stage Omar Ibrahim 10D
22/38
Omar Ibrahim 22/11/2013
10D
to stop (this
is going to
be the
duration of
themovement of
the board).
Once you
want to stop
it, simply
click on it or
on the long
indicator it
travelsthrough.
Now, select
the board,
by clicking
it, and from
there, move
it to
wherever
you want itto be, by
simply
holding and
moving it
around, and
also, if you
want it to
spin or
rotate or
create any
circular
motions, go
to the Edit
menu on the
top toolbar
of the
program, and
choose the
realistic,
not
detailed,
and not a
lot of workwould be
put into it,
and so, it
would lose
action, and
it wont be a
flying
board
anymore.
8/13/2019 Plan Stage Omar Ibrahim 10D
23/38
Omar Ibrahim 22/11/2013
10D
third shape
on the list,
which is the
cube with
the orbitsaround it.
Hold it, and
drag around
to the left,
right, up, or
down, to
create
motion for
the board.When you
move the
video
indicator to
0 again, and
you play the
video, the
car will go
through themovements
you created
for it. Do
the same
thing for the
human, and
make sure
that the
final
destination
he will be at
is exactly
above the
board, so
that it is
realistic, and
so that he
doesnt, at
8/13/2019 Plan Stage Omar Ibrahim 10D
24/38
Omar Ibrahim 22/11/2013
10D
some point,
leave the
board or be
away from it.
Create theelectronic car
station.
Bryce 7.1Pro.
Google.
Go to Google.Type in
Travelator
3d Model.
Look at some
designs, and
choose the
one that you
want. Click
on the link,and download
the model
(there has to
be a
download
button
somewhere
for you to
use themodel).
After
downloading
the model,
go to Bryce.
Go to File
and then
Import
Object,
which can be
found in the
left corner
of the top
toolbar in
the program.
Choose the
image of the
design, and
This step isimportant
because
the
electronic
car station
is one of my
transportat
ion
methodsthat will be
addressed
in the
video, and
so, for it to
be created,
there has
to be a
travelator,or in other
words, a
flat
elevator,
which we
see in malls
and
airports.
The
travelator
will carry
the cars on
it.
1.5m
8/13/2019 Plan Stage Omar Ibrahim 10D
25/38
Omar Ibrahim 22/11/2013
10D
click Open
in the
bottom right
corner of
the screen.at this point,
the
travelator is
imported
into Bryce.
Heres a link
to a good
travelator
design that Ifound online:
http://sketc
hup.google.co
m/3dwareho
use/details?
mid=229468
b0f8f2a9d9
3ee164a8de
7dbc3cAdd cars on it Bryce 7.1
Pro.
Archive
3D
Website.
Go to
http://archi
ve3d.net/
Go to the
People and
Related
Ware
section on
the right,
and then
choose Land
Transport.
Choose a few
cars from
the large
list, but
make sure
that they
This step is
important
because if
you dont
use the
cars, the
station will
be useless
and the
audience
will not
understand
its use.
3m
http://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://archive3d.net/http://archive3d.net/http://archive3d.net/http://archive3d.net/http://archive3d.net/http://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3chttp://sketchup.google.com/3dwarehouse/details?mid=229468b0f8f2a9d93ee164a8de7dbc3c8/13/2019 Plan Stage Omar Ibrahim 10D
26/38
Omar Ibrahim 22/11/2013
10D
are all
modern cars,
since they
will be in the
future.Download
them by
clicking the
download
button after
clicking them
(the
download
button canbe at the
bottom of
the page
when you
click them).
After
downloading
them, go to
Bryce, andgo to File
and then
Import
Object on
the left side
of the top
toolbar of
the program,
and then
choose the
files, one by
one, and
then click
Open at
the bottom
right corner,
and then,
the cars
8/13/2019 Plan Stage Omar Ibrahim 10D
27/38
Omar Ibrahim 22/11/2013
10D
should be on
Bryce.
Adjust them
so that they
sit on thetravelator,
by holding
them and
dragging
them around,
or by making
them rotate
by going to
Edit andthen the
third choice,
the cube
with the
orbits
around it
(The Edit
menu is in
the toptoolbar of
the
program).
Animate the
scene so that
the cars travel
on the station.
Bryce 7.1
Pro.
Go to the
video
slider/cursor
at the
bottom of
the program.
Click it, and
keep it
moving till
whenever
you want it
to stop (this
is going to
be the
duration of
This step is
important
because if
the cars
dont move,
the video
will lack
motion and
action, and
it will not
be realistic
and the
audience
wont
understand
6m
8/13/2019 Plan Stage Omar Ibrahim 10D
28/38
Omar Ibrahim 22/11/2013
10D
the
movement of
the cars).
Once you
want to stopit, simply
click on it or
on the long
indicator it
travels
through.
Now, select
the cars, by
clickingthem, and
from there,
move them
to wherever
you want
them to be,
by simply
holding and
moving itaround, and
also, if you
want it to
spin or
rotate or
create any
circular
motions, go
to the Edit
menu on the
top toolbar
of the
program, and
choose the
third shape
on the list,
which is the
cube with
what is
happening,
in addition
to that the
station willno longer
be a
station, and
so, the
audience
will be
pulled away
from the
video.
8/13/2019 Plan Stage Omar Ibrahim 10D
29/38
Omar Ibrahim 22/11/2013
10D
the orbits
around it.
Hold it, and
drag around
to the left,right, up, or
down, to
create
motion for
the cars.
When you
move the
video
indicator to0 again, and
you play the
video, the
car will go
through the
movements
you created
for it.
Repeat theprocess with
all cars.
Create an
underwater
transportation
capsule.
Bryce 7.1
Pro.
I couldnt
find any
tutorials or
any models
for this
part, so I
might ask
someone who
is an expert
with Bryce in
school or
online, or I
might just
remove this
step.
This step is
important
because
the
underwater
transportat
ion capsule
is one of my
future
transportat
ion
methods
that I will
use in the
video, and
it shows
I dont
know,
because I
dont know
how to
create the
step or
how long it
will take
to create.
8/13/2019 Plan Stage Omar Ibrahim 10D
30/38
Omar Ibrahim 22/11/2013
10D
how
transportat
ion
underwater
will be like,and so, it is
important.
Create a glass
cylinder that
will carry the
capsule.
Bryce 7.1
Pro.
I couldnt
find any
tutorials or
any models
for this
part, so I
might asksomeone who
is an expert
with Bryce in
school or
online, or I
might just
remove this
step.
This step is
important
because
the capsule
will not just
swim by
itself inwater, it
will be held
by the
cylinder,
and so,
creating it
is
important.
I dont
know,
because I
dont know
how to
create the
step orhow long it
will take
to create.
Create waterand allow the
camera to be
inside the
water.
Bryce 7.1Pro.
Aftercreating the
capsule and
the glass
cylinder, go
to the Sky
and Fog
menu in
Bryce, found
in the top
toolbar, and
then, choose
the small
drawing of
the cloud
with the
rainbow
behind it,
found on the
This step isimportant
because if
this part
doesnt look
like the
capsule is in
water, the
whole idea
of it would
be useless,
since I
designed it
so that it is
in water,
not on land,
and so,
water is
needed to
3m
8/13/2019 Plan Stage Omar Ibrahim 10D
31/38
Omar Ibrahim 22/11/2013
10D
right side of
the Sky and
Fog toolbar.
A pop-up will
appear, clickon Disable
Sun Light
on the
bottom right
corner of
the pop-up.
Click on the
tick mark in
the rightcorner of
the bottom
toolbar of
the pop-up.
Go to
Create on
the left
corner of
the toptoolbar of
the program,
and add a
light source,
by clicking
the first
yellow figure
in the
Create
toolbar,
found in
almost the
middle of
the toolbar.
A pop-up will
appear.
Change the
color of the
make the
capsule
underwater
.
8/13/2019 Plan Stage Omar Ibrahim 10D
32/38
Omar Ibrahim 22/11/2013
10D
light source
to water
blue, so that
it looks like
the capsuleis in water.
Do this by
going to
color
settings in
the Light
Lab, found
in the top
right cornerof the lab.
Click on the
white square
there, and
change the
color to
aqua-blue.
Change the
Defuse andSpecular
settings,abo
ve the color
settings, to
50. Click on
the tick
mark on the
right corner
of the
bottom
toolbar of
the pop-up.
Animate the
capsule and
make it move
through the
cylinder.
Bryce 7.1
Pro.
Go to the
video
slider/cursor
at the
bottom of
the program.
This step is
important
because
the capsule
needs to
move, or
3m
8/13/2019 Plan Stage Omar Ibrahim 10D
33/38
Omar Ibrahim 22/11/2013
10D
Click it, and
keep it
moving till
whenever
you want itto stop (this
is going to
be the
duration of
the
movement of
the capsule).
Once you
want to stopit, simply
click on it or
on the long
indicator it
travels
through.
Now, select
the capsule,
by clickingit, and from
there, move
it to
wherever
you want it
to be, by
simply
holding and
moving it
around.
When you
move the
video
indicator to
0 again, and
you play the
video, the
car will go
else the
video is
boring, not
realistic,
and doesntaddress its
point.
8/13/2019 Plan Stage Omar Ibrahim 10D
34/38
Omar Ibrahim 22/11/2013
10D
through the
movements
you created
for it.
Render thevideo when
youre done with
it.
Bryce 7.1Pro
Click on theRender
button in the
bottom part
of the left
toolbar of
the program
(it is the
large green
spherebetween all 5
spheres).
Leave the
video
rendering.
This step isimportant
because if
the video
doesnt
render, you
cant use it
somewhere
else, and it
will neverbe finished,
and its
quality will
be
extremely
low.
Dependson the
length of
the video
and its
content.
Place the video
in iMovie and
create thenarration in it,
including the
narration of the
final FB and
Twitter and
website URLs at
the end of the
video.
iMovie. Go to
Import and
ImportMovie in the
iMovie
toolbar, and
import the
Bryce movie.
Click on the
middle
button in the
middle
toolbar of
iMovie that
looks like a
microphone.
Record your
narration. At
the end of
the video,
insert a
This step is
important
becausethe
narration
makes the
video easier
for the
audience to
see and if
they get
confused
with
something
in the
visuals,
they can
listen to
what I say.
Depends
on length
of video.
8/13/2019 Plan Stage Omar Ibrahim 10D
35/38
Omar Ibrahim 22/11/2013
10D
quick slide
that shows
the FB and
Twitter and
websitelinks, with
narration
over them.
Overall Timing - - - 45 mins
40 secs.
Steps to Create Website:
- Go to your Wikispaces Account, by logging in onqataracademy.wikispaces.com. This step is important becausewithout an account, you wont be able to create the website
(15s)
- Go to the right toolbar on the website (2s)- Click Edit Navigation, found at the very bottom. This step is
important because it will allow you to create the new page (2s)
- Create a new page, and call it the name of the website, bywriting down the name of the page, and clicking Save on the
top right part of the website. This step is important because
this is where you create the actual site, which will be the centerof information for your project (10s)
- Go to the page, by clicking on it (2s)- Insert text and photos and videos using the Edit button on
the top right corner of the website. This step is important
because the website has to have content, and by inserting text
and photos and videos, the website has visuals and it has text,
which makes it attractive and full of work.
- Click Save at the top right corner when youre done doing so.This step is important because if you dont save, all of your work
is gone, and so, the website will not exist anymore (Time:
Depends on how much work you put into the website)
- Overall Estimated Time: 31s + text and images time)Steps to Create Social Media Pages:
FB:
- Write Pages in thetop search bar of the website. This step isimportant because this is where you will be able to go and
create a website. (5s)
8/13/2019 Plan Stage Omar Ibrahim 10D
36/38
Omar Ibrahim 22/11/2013
10D
- Click Create Page.This step is important because this buttonwill take you to the details of creating a website (2s)
- Choose the website category, name it and continue (7s)- Write a description for the page (30s)- Comment in the page using the comment section at the bottom
of the page (Time: Depends on how much you work on the page)
- Overall Estimated Time: 44s + commenting time)- FaceBook Page Tutorial:https://www.youtube.com/watch?v=TmGes4rD3lw
Twitter:
- Create a new Twitter account by entering your details in theTwitter homepage, such as the name, the email, the username,and the password (The signup section, not the login section).
This step is important because this is where you enter you data,
to create the account/page. Click Create Account. (15s)
- Now, you are in the account. Go to your account info, by clickingon your account logo. Go to Edit Profile at the bottom right
corner of the account info, and create a description for the
page. If you want, add a website link, for the website created.
This step is important because the account info are always
important for the audience to see, since it will give themfurther knowledge about the project, its goal, and the animation
video. (2m)
- Change the page picture if you want to, by clicking on the photo,choosing either to upload or take a photo, and inserting it there.
This step is important because a picture is always attractive
and interesting, and it allows the audience to make sure that
this is the page they are looking for, not something else. (1m)
- Tweet and reply in the Tweeting section at the bottom of thepage. This step is important because if you dont keep the page
active, it will be a failure, no one will comment, no one will
benefit, and no one will be part of the project. (Time: Depends
on how much you work on the page).
- Overall Estimated Time: 3min. 15 sec. + tweeting time)- Twitter Page Tutorial:https://www.youtube.com/watch?v=zkWL985S95E
These tutorials are extremely fast and simple, and so, they can
definitely help you accomplish these quick steps.
https://www.youtube.com/watch?v=TmGes4rD3lwhttps://www.youtube.com/watch?v=TmGes4rD3lwhttps://www.youtube.com/watch?v=zkWL985S95Ehttps://www.youtube.com/watch?v=zkWL985S95Ehttps://www.youtube.com/watch?v=zkWL985S95Ehttps://www.youtube.com/watch?v=TmGes4rD3lw8/13/2019 Plan Stage Omar Ibrahim 10D
37/38
Omar Ibrahim 22/11/2013
10D
Overall Estimated Time for All Products:
50 min. and 10 sec. + the commenting and tweeting time.
Comparing Time Estimated to Time Available:Since we will have 4 weeks of working on this project (8 hours) I think I
have plenty of time, compared to the time shown above in creating my
products. If I dont have enough time afterwards, I will start focusing
more, gaining all of my resources, and working on things needed, while
keeping everything organized and neat, so that I dont get confused
between files or products or anything else like that.
Skills and Knowledge Needed:
- I will need the skills of using Bryce and being able to playaround with it and creating an animation on it, and using its
different features that can help me the most in making my
product interesting. Specifically, I need to have the skills of
importing images to Bryce, in addition to the skills of moving
objects around, spinning or rotating them, and creating
animation videos.
- I will need the knowledge of buttons and settings in Bryce, suchas the Render button, the video cursor, which will create the
animation, and the Editing and Grouping and Ungroupingbuttons. I will need the knowledge of creating a website and
how to use it, create it, add images, add videos, and more. I will
also need the knowledge of creating social media pages, and
pictures, videos, and comments on them, in addition to
descriptions, cover images, and more.
Reliability of Plan:
I think my Plan is very reliable. I identified my hardware tools and my
software tools and how I will use them to create my products. I also
created steps for creating the products, and I made them detailed, in
addition to that I wrote down for every step when I need to use which
tool, and how I will create the step, and why the step is important, and its
estimated time to create it, in addition to adding a few pieces of advice
here and there. NOTE: The FaceBook and Twitter steps werent very
detailed because they were very simple to create and they lead to each
other, and so, I didnt find it necessary to make them extremely detailed,
since they are already simple. I also compared the time given to the time
estimated, which allows me to know if Im on the right track or not. In
8/13/2019 Plan Stage Omar Ibrahim 10D
38/38
Omar Ibrahim 22/11/2013
10D
addition, I talked about the skills and knowledge I need to accomplish
this project and finish, so that I know what to do and how to do it.
Overall, I think that my audience can follow this Plan and be able to easily
create their own similar products without problems.
NOTE: If this is considered late and unacceptable, please grade the file
submitted in time (the one before).
Top Related