Download - Philips DVD VIDEO PLAYER

8/12/2019 Philips DVD VIDEO PLAYER

1/46

DVD VIDEO PLAYER

Thank you for choosing Philips.

Need help fast?Read your Users Manual rst for quick tips that make usingyour Philips product more enjoyable.

If you have read your instructions and still need assistance,

you may access our online help at www.philips.com/welcome

DVP3136DVD VIDEO PLAYER

User Manual 6

dvp3136_94_eng 4.indd 1dvp3136_94_eng 4.indd 1 2007 06 05 9:58:10 AM2007-06-05 9:58:10 AM


2/46

2

This product incorporates copyright protectiontechnology that is protected by method claims ofcertain U.S. patents and other intellectual propertyrights owned by Macrovision Corporation and otherrights owners. Use of this copyright protectiontechnology must be authorized by MacrovisionCorporation, and is intended for home and otherlimited viewing uses only unless otherwise authorizedby Macrovision Corporation. Reverse engineering ordisassembly is prohibited.



3/46

English

3

Index

English ------------------------------------------6



4/46

4

LASERType Semiconductor laser InGaAlP (DVD) AIGaAs (CD)Wave length 658 nm (DVD) 790 nm (CD)Output Power 7.0 mW (DVD) 10.0 mW (VCD/CD)Beam divergence 60 degrees

General InformationEnvironmental Information

All unnecessary packaging has beenomitted. The packaging has been madeeasy to separate into two materials;cardboard (box) and polyethylene (bags,protective foam sheet).

Your DVD player consists of materialswhich can be recycled and reused ifdisassembled by a specialised company.Please observe the local regulationsregarding the disposal of packaging

materials, exhausted batteries and oldequipment.

Laser Safety

This unit employs a laser. Due to possibleeye injury, only a qualied service personshould remove the cover or attempt toservice this device.NOTE:

Pictures shown maybe different

between countries.

CAUTION:

WARNING LOCATION: ON THE

BACKPLATE OF THE SET

NEVER MAKE OR CHANGE

CONNECTIONS WITH THE

POWER SWITCHED ON.

For Customer Use:Read carefully the information located atthe bottom or rear of your DVD Videoplayer and enter below the Serial No.Retain this information for futurereference.

Model No. DVP 3136Serial No. ___________________

Specications are subject to change withoutnotice. Trademarks are the property ofKoninklijke Philips Electronics N.V. or theirrespective owners.

Windows Media and the Windows logo

are trademarks, or registered

trademarks of Microsoft Corporation

in the United States and/or other

countries.

Manufactured under license from

Dolby Laboratories, Dolby

and the double-D symbol are

trademarks of Dolby Laboratories.



5/46

5

Language Code



6/46

English

6

ContentsCare and Safety Information

Setup .............................................................................................................................................................8Cleaning discs .............................................................................................................................................8

General Information

Accessories supplied ................................................................................................................................9Region codes...............................................................................................................................................9

Connections

Connecting to television .......................................................................................... 10-11Using Composite Video jacks (CVBS) ................................................... ........................................... 10Using Component Video jacks (YPbPr) ................................................ ........................................... 10Using an accessory RF modulator ......................................................................................................11

Connecting the power cord ...........................................................................................12

Optional connections

Connecting to a stereo system .....................................................................................13Stereo system has right/ left Audio In jacks .................................................. ................................. 13

Connecting to a digital AV receiver .............................................................................13Receiver has a PCM, Dolby Digita l or MPEG decoder .................................................... ............ 13

Connecting to an Multi- Channel Receiver .................................................................14Receiver has a Dolby Digital decoder .........................................................................................................14

Connecting to Speaker ..................................................................................................14Receiver as +RCH- and +LCH-Audio In Jacks .......................................................... ..................... 14

Product Overview

Front and Rear Panels ................................................................................................... 15Remote Control ..............................................................................................................16

Getting StartedStep 1: Inserting Batteries.............................................................................................17

Using the remote control to operate the system ..........................................................................17Step 2: Finding your viewing channel ...........................................................................17Step 3: Setting up Progressive Scan feature .............................................................. 18Step 4: Selecting the matching color system .............................................................19Step 5: Setting the language ........................................................................................ 20

On-screen display (OSD) language......................................................... ........................................... 20Audio, Subtit le and DVD menu languages ...................................................... ................................. 20

Playback from Disc

Playable discs .................................................................................................................. 21Supported formats ........................................................ .......................................................... .............. 21

Playback Features

Starting disc playback ................................................................................................... 22Basic playback controls ................................................................................................. 22

Pausing playback......................................................................................................................................22Selecting title/chapter/track ................................................................................................................22Stopping playback ...................................................................................................................................22

Operations for video playback ..................................................................................... 23Using the Disc Menu ..................................................... ......................................................... ............... 23Zooming in .................................................... .......................................................... ................................. 23Resuming playback from the last stopped point ....................................................... ..................... 23Slow Motion ................................................... ......................................................... ................................. 23Forward / Reverse Searching ......................................................... ..................................................... 23Angle ...................................................... ......................................................... ........................................... 23



7/46

English

7

ContentsSelecting various repeat functions .............................................................................. 24

Repeat play mode .................................................... .......................................................... ..................... 24Repeating a section within a title /chapter/track ..................................................... ....................... 24

Viewing the disc playback information ....................................................................... 25Title/Chapter/Track select ion ......................................................... ................................................... 25Time Search .................................................. .......................................................... ................................. 25

Special DVD Features ................................................................................................... 26Playing a Title .......................................................... ......................................................... ........................ 26Changing the Audio Language ......................................................... .................................................... 26Subtitles.................... ......................................................... ......................................................... ............... 26

Special VCD and SVCD Feature.................................................................................. 26Playback Control (PBC).................... ......................................................... ........................................... 26

Playing MP3/WMA/JPEG/Kodak/Fuji Picture CD ................................................ 27-28Genera l Operat ion ........................................................ .......................................................... .............. 27

Playback select ion ................................................. ......................................................... ........................ 27Zoom picture (JPEG) .................................................... .......................................................... .............. 28Playback with multi-ang les (JPEG) .......................................................... ........................................... 28

DVD Menu Options

Using the Language setup menu ................................................................................. 29OSD Language ........................................................ ......................................................... ........................ 29Subtitle/Audio/DVD Menu ..................................................... ......................................................... ..... 29

Using the Video setup menu ...................................................................................30-32Setting the Aspect Ratio ......................................................................................................................30View Mode .................................................... .......................................................... ................................. 31TV System ..................................................... ...................................................... ..................................... 31Video Out ...................................................... .......................................................... ................................. 31Smart Picture .......................................................... ......................................................... ........................ 32

Using the Audio setup menu ...................................................................................33-35Front / Center / Surround Speakers ....................................................... .......................................... 33

Subwoofer ....................................................... .......................................................... ............................... 34Digital Output ........................................................ ......................................................... ........................ 34Night Mode ................................................... .......................................................... ................................. 35Down Sampling ...................................................... ......................................................... ........................ 35Audio Output ......................................................... ......................................................... ........................ 35

Using the Rating setup menu ..................................................................................36-37Rating level settings .........................................................................................................................36-37Changing the Password................................................. .......................................................... .............. 37

Using the Misc (Miscellaneous) setup menu .........................................................38-39Restoring to the origina l settings ................................................... .................................................... 38Volume Control ..................................................... ...................................................... ........................... 39Speaker Delay ......................................................... ......................................................... ........................ 39

Others

Software upgrade .......................................................................................................... 40Troubleshooting ........................................................................................................41-42

Specications ................................................................................................................. 43Glossary........................................................................................................................... 44



8/46

English

8

Care and Safety InformationDANGER!

High voltage! Do not open the

device. You run the risk of getting

an electric shock.

The machine does not contain any

user-serviceable parts. Please leave

all maintenance work to qualied

personnel.

Setup

Finding a suitable location Place the set on a at, hard and stable

surface. Do not place the set on acarpet.

Do not put any equipment or heavyobjects on top of the set.

Do not position the set on top ofother equipment that might heat it up(such as receiver or amplier).

Do not put anything under the set(such as CDs, magazines).

Install this unit near the AC outlet andwhere the AC power plug can bereached easily.

Space for ventilation

Place the apparatus in a location withadequate ventilation to preventinternal heat build up. Allow at least10 cm (4.0) clearance from the rearand the top of the set and 5cm (2.0)from the left and right to preventoverheating.

10cm (4.0") 10cm (4.0")

5cm (2.0")

5cm (2.0")

Avoid high temperatures, moisture,

water and dust

Apparatus shall not be exposed todripping or splashing.

Do not place any sources of dangeron the apparatus (such as liquid lledobjects, lighted candles).

Cleaning discs

Some problems occur because the discinside the player is dirty (frozen picture,sound disruptions, picture distortions).To avoid these problems, discs should becleaned on a regular basis.

To clean a disc, use a micro bre cleaningcloth and wipe the disc from the centerto the edge in a straight line.

CAUTION!

Do not use solvents such as benzene,thinner, commercially available cleaners,or anti-static sprays intended for analogdiscs. Since the optical unit (laser) of theDVD player operates at a higher power

than regular DVD or CD players,cleaning CDs intended for DVD or CDplayers may damage the optical unit(laser). Therefore, refrain from using acleaning CD.



9/46

English

9

General Information

Accessories supplied

ALL 4

Region

U.S.A. andCanada regions

U.K andEurope regions

Asia Pacic,Taiwan, Korea

Australia,New Zealand,Latin America

Russia and

India regions

China, Calcos Islands,Walls and Futuna

Islands

ALL

ALL

56

Discs that canbe played

ALL

ALL

ALL

3

Remotecontrol and

two AAAbatteries

Region codes

This DVD player is designed to supportthe Region Management System. Checkthe regional code number on the discpackage. If the number does not matchthe players region number (see tablebelow), the player may be unable toplayback the disc.

Tips:

It may not be possible to play CD-R/RWor DVDR/RW in all cases due to the typeof disc or condition of the recording. If you are having trouble playing a certaindisc, remove the disc and try a different one.Improper formatted disc will not played onthis DVD player.

Compositevideo cable

(yellow) andAudio cables(white, red)

SUBTITLE

ZOOM

AUDIO

STOP

PLAY/PAUSE

MUTE

SETUPTITLE

RETURN

MENU

DISC

DISPLAY

NEXTPREV



10/46

English

10

IMPORTANT!

You only need to make one video

connection from the following

options, depending on thecapabilities of your television.

Connect the DVD player directly

to the television.

Using Composite Video jacks

(CVBS)

AUse the composite video cable (yellow)to connect the DVD players TV OUT

(CVBS) jack to the video input jack (or

labeled as A/V In, Video In, Composite or

Baseband) on the television (cable

supplied).

BTo hear sound of this DVD playerthrough your television, use the audio

cables (white/red) to connect FRONT

(L/R) AUDIO OUT jacks of the DVD

player to the corresponding AUDIO IN

jacks on the television (cable supplied).

IMPORTANT!

The progressive scan video quality

is only possible when using YPbPr

and a progressive scan television isrequired.

Using Component Video jacks

(YPbPr)

A Use the component video cables (red/blue/green) to connect the DVD players

YPbPrjacks to the component video

input jacks (or labeled as YPbPr) on the

television (cable not supplied).

B To hear sound of this DVD playerthrough your television, use the audio

cables (white/red) to connect FRONT(L/R) AUDIO OUT jacks of the DVD

player to the corresponding AUDIO IN

jacks on the television (cable supplied).

C Proceed to page 18 for detailed

progressive scan setup.

Connections

TIPS: Before making or changing any connections, make sure that all the devices are disconnectedfrom the power outlet.

Connecting to television

DIGITAL

OUT TVOUT

COAXIALAUDIOOUT COMPONENTVIDEOOUT

FRONTR

FRONTL

REARR

REARL

SUBWOOFER

CENTER

AUDIOIN

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIOOUT

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEOIN

2 1

DIGITAL

OUT TVOUT


FRONTR

FRONTL

REARR

REARL

SUBWOOFER

CENTER

AUDIOIN

V (Pr/Cr)

U (Pb/Cb)

Y

S-VIDEOIN

VIDEO IN

COMPONENTVIDEO IN

AUDIOOUT

V(Pr/Cr)

U(Pb/Cb)

Y

S-VIDEOIN

VIDEOIN

COMPONENTVIDEOIN

2

1



11/46

English

11

DIGITAL

OUT TVOUT

COAXIALOOUT COMPONENTVIDEOOUT

FRONTR

FRONTL

R

L

AUDIO IN

R L

VIDEOIN

TO TVANT IN

CH3 CH4

ANT IN

ANTIN

134

2

Connections (continued)


IMPORTANT!

If your television only has a single

Antenna In jack (or labeled as 75

ohm or RF In,) you will need an RFmodulator in order to view the

DVD playback on the television. See

your electronics retailer or contact

Philips for details on RF modulator

availability and operations.

Using an accessory RF modulator

A Use the composite video cable (yellow)to connect the DVD players TV OUT

(CVBS) jack to the video input jack on

the RF modulator.

B Use the RF coaxial cable (not supplied) to

connect ANTENNA OUT or TO TV jackon the RF modulator to the ANTENNA

IN jack on the television.

RF coaxial cable to TV

Back of RF Modulator(example only)

C To hear sound of this DVD player

through your TV, use the audio cables

(white/red) to connect FRONT (L/R)

AUDIO OUT jacks of the DVD player tothe corresponding AUDIO IN jacks on

the RF modulator (cable supplied).

D Connect the Antenna or Cable TVservice signal to the ANTENNA IN or

RF IN jack on the RF modulator. (It may

have been connected to your TV

previously. Disconnect it from the TV).



12/46

English

12

Connections (continued)


Connecting the power cord

After everything is connected

properly, plug in the AC power cord

to the power outlet.

Never make or change any connectionswith the power switched on.

When no disc is loaded, pressSTANDBY ON on the DVD player

front panel.

may appear on the display

panel.

DIGITAL

OUT TVOUT

COAXIALAUDIOOUT COMPON

FRONTR

FRONTL

REARR

REARL

SUBWOOFER

CENTER



13/46

English

13

Connecting to a stereosystem

Receiver has a PCM, Dolby Digital

or MPEG decoder

A Select one of the video connections(CVBS VIDEO IN or COMPONENT

VIDEO IN) depending on the options

available on your television.

BConnect the COAXIAL jack of the DVDplayer to the corresponding Digital Audio

In jack on your receiver (cable not

supplied).

C Set the DVD players digital output to

PCM-Only or ALL depending on the

capabilities of your receiver (see page 34

{Digital Output}).

Tip: If the audio format of the Digital Outputdoes not match the capabilities of yourreceiver, the receiver will produce a strong,

distorted sound or no sound at all.

Stereo system has right/ left Audio

In jacks




BUse the audio cables (white/red) toconnect FRONT (L/R) AUDIO OUT

jacks of the DVD Player to the

corresponding AUDIO IN jacks on the

stereo system (cable supplied).

Connecting to a digital AVreceiver

Optional connections


DIGITAL

OUT TVOUT


FRONTR

FRONTL

REARR

REARL

SUBWOOFER

CENTER

AUDIOIN

STEREO

DIGITAL

DIGITAL

OUT TVOUT

COAXIALAUDIOOUT COMPONENT VIDEOOUT

FRONTR

FRONTL

REARR

REARL

SUBWOOFER

CENTER

AUDIOIN

DIGITAL

AV Receiver



14/46

English

14

Optional connections (continued)

Connecting to an Multi-Channel Receiver

Receiver has a Dolby Digital

decoder




BConnect the Audio Out Left and Rightjack for Front and Rear speakers to the

corresponding input jacks on your

receiver (cable not supplied).

CConnect the Audio Out for Center

speaker and Subwoofer to the

corresponding inputs on your receiver

(cable not supplied).

MULTICHANNELAUDIOIN

SUBW.AV Receiver

REARFRONT CENTER

REARFRONT

L L

R R

Connecting to Speaker

Receiver as +RCH- and +LCH-

Audio In Jacks




B Connect the +RCH- and -LCH+ tothe corresponding inputs on your

speaker. (speakers not supplied).

Tip: 6 and 8 is advised to be the inputimpedance of the connecting speakers. To have better audio effect from thespeakers, set Audio output to Stereo.

Connecting the speaker wire with improperpolarity might result in distorted sound/lowquality sound. Shorting the speaker terminals might resultin the damage of the main unit and willmake the warranty void. Placing the speakers too close to your TVmight distort the image on the TV.

SPEAKER

+ RCH - - LCH +



15/46

English

15

SPEAKER

+ RCH - - LCH +

Product Overview

Front and Rear Panels

STANDBY ON2 Turns on the player or switches

to standby mode

Disc Tray

OPEN/CLOSE

Opens or closes the disc tray.Display panel

Shows information about thecurrent status of the DVD player.

STOP Stops playback

PLAY/PAUSEu

Starts or pauses playback.IR Sensor

Point the remote control towardsthis sensor

Mains ~(AC Power Cord) Connect to a standard AC outlet

Multi-channel Audio Out

Center speaker, subwoofer, frontand rear speakers multi-channelconnection

COAXIAL (Digital audio out)

Connect to coaxial AUDIO input

of a digital audio equipment

+RCH-/-LCH+ (Speaker)

Connect to the input jacks ofa pair of speaker

YPbPr (Component Video Out)

Connect to YPbPr input of a television

TV OUT (CVBS)

Connect to CVBS Video input of a

television



16/46

English

16

SUBTITLE

ZOOM

AUDIO

STOP

PLAY/PAUSE

MUTE

SETUPTITLE

RETURN

MENU

DISC

DISPLAY

NEXTPREV

Product Overview (continued)

Remote Control

DISC MENU

Enters or exits the disccontents menu

Switches on or off theplayback control mode (for

VCD 2.0 only)

OK

Conrms an entry orselection

RETURN/TITLE

To go back to previousmenu/ show title menu

PREV Skips to the previous title/

chapter/track

STOP Stops playback

uPLAY/PAUSE Starts or pauses playback

SUBTITLE

To access subtitle languagesystem menu

ZOOM

Enlarge a picture on the TVscreen

VOLUME

Displays the speakersvolume level

REPEAT/ REPEAT A-B

Selects various repeat mode Repeats playback a specic

section on a disc

2 To switch the DVD player

to standby mode or ON

DISPLAY

Displays information on TVscreen during playback

Cursor buttons for movingto the left or right, do a fastforward/reverse search.

Cursor buttons for movingup/down, do a slowforward/backward

SETUP

Enters or exits the systemsetup menu

NEXT

Skips to the next title/chapter/track

MUTE

Disables or enables soundoutput

Alphanumeric keypad

Selects numbered items ina menu

AUDIO

Selects an audio language(DVD/VCD) or an audiochannel



17/46

English

17

Step 1: Inserting Batteries

AOpen the battery compartment.

B Insert two batteries type R03 or AAA,following the indications (+ ) inside thecompartment.

CClose the cover.

CAUTION!

Remove batteries if they are

exhausted or if the remote is not to

be used for a long time.

Do not use old and new or

different types of batteries in

combination.

Batteries contain chemical

substances, so they should bedisposed of properly.

Using the remote control to

operate the system

STOP

PLAY/PAUSE

MUTE

SETUPTITLE

RETURN

MENU

DISC

DISPLAY

NEXTPREV

AAim the remote control directly at theremote sensor (IR) on the front panel.

BDo not put any objects between theremote control and the DVD playerwhile operating the DVD player.

Step 2: Finding your viewing

channel

A Press STANDBY-ON2on the DVDplayer to turn it on.

B Turn on the TV and set it to the correctvideo-in channel. You should see the blueDVD background screen.Usually these channel are between the

lowest and highest channels and may

be called FRONT, A/V IN, VIDEO.See your TVs manual for moredetails.

Or, you may go to channel 1 on yourTV, then press the Channel downbutton repeatedly until you see theVideo In channel.

Or, the TV remote control may havea button or turn that choosesdifferent video modes.

Or, set the TV to channel 3 or 4 ifyou are using an RF modulator.

C If you are using external equipment, (such

as audio system or receiver), turn it onand select the appropriate input sourcefor the DVD player output. Refer to theequipment users manual for detail.

Getting Started



18/46

English

18

Getting Started (continued)

Step 3: Setting up

Progressive Scan feature

(for Progressive Scan TV only)The progressive scan displays twice thenumber of frames per seconds thaninterlaced scanning (ordinary normal TVsystem). With nearly double the numberof lines, progressive scan offers higherpicture resolution and quality.

Before you start... Ensure that you have connected thisDVD player to a progressive scan TVusing the Y Pb Pr connection (see page10). Ensure that you have completed thebasic installation and set-up.

ATurn on your TV and set to interlacemode (refer to your TV user manual).

B Press STANDBY ON2on theremote control to turn on the DVDplayer.

C Select the correct video-in channel. The DVD background menu appears.

D Press SETUP.

EPressto select { Video}, then press.

Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System :

Video Out :

Smart Picture :

4:3

Auto Fit

NTSC

Component

Personal

Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System :

Video Out :

Smart Picture :

4:3

Auto Fit

NTSC

Component

Personal

Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System :

Video Out Interlaced

Smart Picture P-Scan

4:3

Auto Fit

PAL

F Pressrepeatedly to select { VideoOut}, then press .

GSelect { P-Scan}, then press OKtoconrm. The menu will appear on the TV.

Activating Progressive Scan

1.Ensure your TV system supports

Progressive Mode

2.If there is a distorted picture on

the TV, wait 15 seconds for

automatic recover

Yes NO

H Press to highlight { Yes} and pressOK to conrm.

I Turn on your TV progressive scan mode(refer to your TV user manual). The menu will appear on the TV.

Confirm again to use new setting

Revert to original setting in 14 seconds

Yes NO

J Press to highlight { Yes} and pressOK to conrm. The setup is now completed and you

can start enjoy the high qualitypicture.

To deactivate Progressive Scan

manually:

Wait for 15 seconds for the autorecovery.

OR

A Press OPEN/CLOSEon the DVDplayer to open the disc tray.

B Press numeric keypad 1on theremote control for few seconds. The DVD background screen appears.

Tip: There are some progressive scan TVs andHigh-Denition TVs that are not fullycompatible with this unit, resulting in theunnatural picture when playing back a DVDVIDEO disc in the progressive scan mode. Insuch a case, turn off the progressive scanfeature on both the DVD player and your TV.

TIPS: The underlined option is the factory default setting.

Press to go back to previous menu item. Press SETUPto exit the menu item.



19/46

English

19




Step 4: Selecting the

matching color system

The color system of the DVD player, discand TV should match in order for thedisc to play. Before changing the TVsystem, determine the color system ofyour TV.

Language

Video

Audio

Misc

Rating

Aspect Ratio

View Mode :

TV System :

Video Out :

Smart Picture :

4:3

Auto Fit

NTSC

Component

Personal

Language

Video

Audio

Misc

Rating

Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System NTSC

Video Out PAL

Smart Picture Multi

4:3

Auto Fit

A Press SETUP.

BPressto select { Video}, then press.

C Press

repeatedly to select{ TV System}, then press .

DUseto select one of the optionsbelow:

{ NTSC}Select this if the connected TV has theNTSC colour system. It will change thevideo signal of a PAL disc and output it toNTSC format.

{ PAL}Select this if the connected TV has thePAL colour system. It will change thevideo signal of an NTSC disc and output

it to PAL format.

{ Multi}Select this if the connected TV iscompatible with both NTSC and PAL(multi-system). The output format will bein accordance with the video signal of thedisc.

E Select a setting and press OK. Follow the instructions show on the

TV to conrm the selection (if any).

Confirm again to use new setting

Revert to original setting in 14 seconds

Yes NO

Changing NTSC to PAL

1.Ensure your TV system supports

PAL Standard

2.If there is a distorted picture on

the TV, wait 15 seconds for

automatic recover

Yes NO

F Press to highlight { Yes} and pressOK to conrm.

To reset to default TV color system:

Wait for 15 seconds for the autorecovery.

OR

A Press OPEN/CLOSEon the DVDplayer to open the disc tray.

B Press numeric keypad 3on the

remote control for few seconds. The DVD background menu appears.

Tips: Before changing the current TV coloursetting, ensure that your TV supports theselected TV System. If there is no proper picture on your TV,wait for 15 seconds for auto recovery.

Select PAL for Asia Pacic region.

Select NTSC for Taiwan region.



20/46

English

20


Step 5: Setting the language

The language options are differentdepending on your country or region. Itmay not correspond to the illustrationsshown on the user manual.

On-screen display (OSD) language

Select this to change the language of thisDVD player screen display menu.

The menu language (on-screen display)for the system will remain as you set it.

Language

Video

Audio

Rating

Misc

Audio : English

DVD menu : English

OSD language English

Subtitle Hindi

A Press SETUP.BPressto select { Language}, then

press .

C Pressto select { OSD Language},then press .

DUseto select a language and pressOKto conrm.



Audio, Subtitle and DVD menu

languages

You can choose your preferred languageor sound track from audio, subtitles andDVD menu languages. If the selectedlanguage is not available on the disc, thediscs default language will be usedinstead.

Language

Video

Audio

Rating

Misc

OSD language : English

Subtitle : Auto

DVD menu

Audio English

Hindi

A Press SETUP.

BPressto select { Language}, thenpress .

C Pressto highlight one of the optionsbelow, then press .

{ Subtitle}Select this to change the subtitle language.

{ Audio}Select this to change disc sound tracklanguage.

{ DVD menu}Select this to change the language of thedisc menu.

DUseto select a language and pressOKto conrm.

ERepeat steps C-Dfor other language

settings.



21/46

English

21

IMPORTANT!

If the INVALID KEY appears on

the TV screen when a button is

pressed, it means the function is not

available on the current disc or at

the current time.

DVD discs and players are designed

with regional restrictions. Before

playing a disc, make sure the disc is

for the same zone as your player.

Playable discs

Using this DVD player, you can playbackon the following discs:

DVD Video(Digital Versatile Disc)

DVDRW(DVD Rewritable)Audio/Video format or

MP3/WMA/JPEG les.

DVDR(DVD Recordable)Audio/Video format or

MP3/WMA/JPEG les.

CD-R(CD-Recordable)Audio/Video format or

MP3/WMA/JPEG les.

CD-RW(CD-Rewritable)Audio/Video format or

MP3/WMA/JPEG les.

Audio CD(Compact DiscDigital Audio)

Video CD

(Formats 1.0, 1.1, 2.0)

Playback from Disc

TIPS: Some discs cannot be played on this DVD player due to the conguration and characteristics ofthe disc, or due to the condition of recording and authoring software that was used.

Super Video CD

MP3-Disc

Supported formats

MP3/WMA tracks

The le extensions has be to be.mp3, .wma

JPEG/ISO format Maximum 15 characters display.

Supported sampling frequencies andcorresponding bit-rates;

32kHz 64 320 kbps

44.1kHz, 48kHz 80 320 kbps

JPEG pictures

The le extensions has be to be .JPGand not .JPEG.

JPEG/ISO format

It can only display DCF-standard stillpictures or JPEG pictures such asTIFF.

Tips: Maximum 100 sessions for CD and 10multi border for DVD are supported. For DVD-R and DVD-RW multi border,only nalized disc are supported. For DVD+R and DVD+RW multi borderboth nalized and unnalized disc are NOTsupported.



22/46

English

22

Starting disc playback

ATurn on the TV to the correct programnumber for the DVD player (e.g. EXT,0, AV).

B Press STANDBY-ON2to turn onthe DVD player.

C Press OPEN/CLOSEon the front ofthe DVD player.

You can also hold down the STOPbutton on the remote control to openand close the disc tray.

D Place a disc into the disc tray with thelabel facing up, then press OPEN/CLOSE. For double-sided discs, load the side

which you want to play facing up.

E Playback may start automatically.If not, press PLAY/PAUSEu.

If a disc menu appears on the TV, seepage 23 'Using the Disc Menu'.

If the child lock was activated for theinserted disc, you have to enter yourfour-digit password (see page 36).

For more playback features, see pages21~27.

Tips: Do not overturn the DVD player while discloading, playing or ejecting. Do not close the disc tray manually even ifthe power switched off.

Playback Features

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.

Basic playback controls

Unless otherwise stated, all operationsdescribed are based on Remote Controluse.

Pausing playback

ADuring playback, press PLAY/PAUSEuto pause playback and display a stillpicture.

Sound will be muted.B To resume normal playback, press

PLAY/PAUSEuagain.

Selecting title/chapter/track

Press PREV/ NEXTto go tothe previous or next title/chapter/track.

Press DISPLAYto display the discinformation text line for title/chapter/track (example - 00/08).

Use alphanumeric keypad (0-9)toenter valid title/chapter/track number,

then press OK. The playback skips to the selected

title/chapter/track.

Stopping playback

Press STOP.

Tips: Screen saver will start automatically if thedisc playback is stopped for about 5 minutes. The player will automatically switch toPower Standby mode if you do not press anybuttons for about 15 minutes after the dischas stopped playing.



23/46

English

23


Playback Features (continued)

Operations for video

playback

Using the Disc Menu

Depending on the disc, a menu mayappear on the TV screen once you loadin the disc.

To select a playback feature or item

Usekeys or numeric keypad

(0-9)on the remote, then press OKtostart playback.

To access or remove the menu

Press DISC MENUon the remote.

Zooming in

This function allows you to enlarge thepicture on the TV screen and to panthrough the enlarged picture.

ADuring playback, press ZOOMrepeatedly to display the picture withdifferent scales.

Usekeys to pan throughthe enlarged picture.

Playback will continue.

B Press ZOOMrepeatedly to return tothe original size.

Resuming playback from the last

stopped point

Resume playback of the last 5 discs ispossible, even if the disc was ejected(open), standby or power off. Autoresume is active for DVD,VCD,SVCD,CDtypes of discs.

Load one of the last 5 discs. Play from start, press [PREV] appears

during playback for rst 10 seconds.

During the message appears on the TVscreen, press PREVto start playbackfrom the beginning. Playback restarts from the rst title

(DVD) or the beginning of the title/track (VCD/CDDA/SVCD).

To remove the message from the TVscreen, press DISPLAY.

Slow Motion

You can slow forward or slow reverse adisc during playback and select a differentspeed.

For DVD,VCD,SVCD

A Pressduring playback to select therequired speed: 1/2, 1/4, 1/8 or 1/16(forward or backward). Sound will be muted.

B To return to normal speed, pressPLAY/PAUSEu.

Forward / Reverse Searching

You can fast forward or fast reverse a

disc during playback and select a desiredsearch speed.

For DVD,VCD,SVCD,CD

A Press directly or pressfor afew seconds during playback to select therequired speed: 2X, 4X, 8X, 16X or 32X(backward or forward). Sound will be muted (DVD/VCD) or

intermittent (CD).

B To return to normal speed, pressPLAY/PAUSEu.

Tip:

For CD, fast forward or fast reverse isavailable only when pressingfor fewseconds or more.



24/46

English

24

Repeating a section within a title/

chapter/track

You can repeat the playback of a specicsegment within a title/chapter track. Todo this, you must mark the start and endof the segment you want.

A While playing a disc, press REPEAT/REPEAT A-B. The menu appears on the TV screen.

Rep off A - B off 1/1

B Press to highlight {A-B Off}, thenpress OKat your chosen starting point.

C Press OKagain at your chosen end point. The section A and B can be set only

within the same chapter/track.

The section will now repeatcontinuously.

D To exit the sequence, press OK.

Angle

A When { Angle } information appears onthe TV screen, press to highlight{ Angle }.

B Press OKrepeatedly to switch betweendifferent angle.Playback will go to the selected angle.

Selecting various repeat

functions

Repeat play mode

The repeat play options vary dependingon the disc type.

AWhile playing a disc, press REPEAT/REPEAT A-B. The menu appears on the TV screen.

Rep off A - B off 1/1

B Press to highlight {Rep Off}, thenpress OKrepeatedly to select thefollowing repeat options.

For DVD

Repeat Chapter (currently playingchapter)

Repeat Title (currently playing title)

Off (cancel)

For Video CD, Audio CD

Repeat Single (currently playing track)

Repeat All (entire disc) Off (cancel)

For MP3/WMA

Repeat Single (currently playing le)

Repeat folder (current folder)

Off (cancel)

For JPEG

Repeat Single (currently playing le)

Repeat folder (current folder)

Off (cancel)

Tip:

For VCD, repeat playback is not possible ifthe PBC mode is switched on.





25/46

English

25



Viewing the disc playback

information

You can view the disc information (suchas current title/chapter/track number,total elapsed time or playing time on thedisc) without interrupting the discplayback.

ADuring playback, press DISPLAYrepeatedly on the remote control.The available disc information appears

on the TV screen with the followingsequence.

Title/Chapter

Title /1 Chapter 6/161 (DVD)

Time

Time 00:03:36/01:22:34 (DVD)

Track

Track 3/21 (VCD)

Time

Time 00:00:56/00:03:34 (VCD)

Title/Chapter/Track selection

A Press to select {Title} / {Chapter}or {Track}.

BUse the alphanumeric keypad 0-9toinput a valid number.

C Press OKto conrm.The playback skips to the chosen title/

chapter/track.

Time Search

A When {Time} information appears on theTV screen, press OKto access.

BUse the alphanumeric keypad 0-9toinput the valid time (such as 0:34:27).

C Press OKto conrm.The playback skips to the chosen

time.



26/46

English

26



Special DVD Features

Playing a Title

A Press DISC MENU.The disc title menu appears on the

TV.

BUsekeys or alphanumerickeypad 0-9to select a play option.

C Press OKkey to conrm.

Changing the Audio Language

For DVD

Press AUDIOrepeatedly to selectdifferent audio languages.

Changing the Audio Channel

For VCD

Press AUDIOto select the availableaudio channels provided by the disc(LEFT, RIGHT, MIX, STEREO).

Subtitles

Press SUBTITLErepeatedly to selectdifferent subtitle languages.

Special VCD and SVCD

Feature

Playback Control (PBC)

For VCD with Playback Control

(PBC) feature (version 2.0 only)

Press DISC MENUto toggle betweenPBC ON and PBC OFF.If you select PBC ON, the disc menu

(if available) will appear on the TV.

Use PREV/ NEXTto turn toprevious/next page or use thealphanumeric keypad 0-9to select aplay option.

During playback,pressing PREVafter the rst 5

seconds, playback will start from thebeginning of the current track,

pressing PREVwithin the rst 5seconds, playback will go to theprevious track.

During playback, pressing RETURN/TITLEwill return to the menu screen (ifPBC is on).

If you want to skip the index menu

and playback directly from the

beginning,

Press DISC MENUkey on the remotecontrol to turn to PBC off.



27/46

English

27



Playing MP3/WMA/JPEG/

Kodak/Fuji Picture CD

IMPORTANT!

You have to turn on your TV and set tothe correct Video In channel. (See page16 Finding your viewing channel).

General Operation

ALoad a disc.

The disc reading time may exceed 30seconds due to the complexity of thedirectory/le conguration.

The data disc menu and ID3 (MP3) /Meta data (WMA) information(including at least title, singer andalbum) appears on the TV screen.

00:00:46

Music Playing

02/20 /MP3/07..... MP3

GoUp

07.----

09.---

2002.---

TAKEME TOYOUR

----

---

----

Repeat : Off

Title:----- Singer:----- Album Year: Comment:

Filter

B Pressto select the folder and pressOKto open the folder.

C Pressto select a track/le.

D Press OKto conrm.

Tips: If the playing le is not selected, the ID3/Meta information will disappear. If a jpeg le is selected, a preview willappear.

Playback selection

During playback, you can;

Press PREV/ NEXTto selectthe previous/next track/le in the currentfolder.

Presson the remote torotate/ip the picture les.

Press PLAY/PAUSEurepeatedly topause/resume playback.

For MP3/WMA,During playback,pressing PREVafter the rst 5

seconds, playback will start from thebeginning of the current track,

pressing PREVwithin the rst 5seconds, playback will go to theprevious track.

During playback, press and holdPREV/ NEXTfor about fewseconds to access fast forward or fastreverse with the required speed: 2X, 4X,8X, 16X or 32X.

Tip: For MP3/WMA, fast forward or fastreverse is available only when pressingfor few seconds or more.



28/46

English

28



Zoom picture (JPEG)

During playback, press ZOOMrepeatedly to display the picture withdifferent scales.

Useto pan through thezoomed picture.

Playback with multi-angles (JPEG)

During playback, presstorotate the picture on the TV screen.

: ip the picture vertically by 180: rotate the picture anti-clockwise by

90: rotate the picture clockwise by 90

Tip: It may not be possible to play certainMP3/JPEG disc due to the conguration andcharacteristics of the disc or condition of therecording.



29/46

English

29

DVD Menu OptionsThis DVD Player setup is carried out viathe TV, enabling you to customize theDVD player to suit your particularrequirement.

Using the Language setup

menu

A Press SETUPon the remote control. The system setup menu appears.

Language

Video

Audio

Rating

Misc

OSD Language :

Subtitle :

:Audio

:DVD Menu

English

Auto

English

English

B Pressto select { Language}, thenpress .

C Pressto select an item, then pressto access.

Example: { OSD Language} The options for the selected item

appears.

If the selection in the menu is greyedout, that means the feature is notavailable or not possible to change atthe current state.

DUseto select a setting and pressOKto conrm.

Example: { English} The setting is selected and setup is

complete.

ETo exit, press SETUP.

OSD Language

This menu contains various languageoptions for the language displayed on thescreen. For details, see page 20.

Subtitle/Audio/DVD Menu

These menus contains various languageoptions for audio, subtitle and disc menuwhich may be recorded on the DVD. Fordetails, see page 20.





30/46

English

30

DVD Menu Options (continued)



Using the Video setup menu


Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System :

Video Out :

Smart Picture :

4:3

Auto Fit

NTSC

Component

Personal

Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System :

Video Out :

Smart Picture :

4:3

Auto Fit

NTSC

Component

Personal

Language

Video

Audio

Rating

Misc

Aspect Ratio :

View Mode :

TV System :

Video Out :

Smart Picture :

4:3

Auto Fit

PAL

Interlaced

Standard

B Pressto select { Video}, thenpress .

C Pressto select an item, then pressto access.Example: { TV System} The options for the selected item

appears.


DUseto select a setting and pressOKto conrm.Example: { PAL} The setting is selected and setup is

complete.


Setting the Aspect Ratio

The picture shape can be adjusted to tyour TV and the format must be availableon the playback disc. Otherwise, the TVdisplay will not affect the picture duringplayback.

AIn Video, press to select { AspectRatio}, then press .

{ 4:3}Select this if you have a

normal TV. A wide-screen display withblack bars on the topand bottom will be displayed on the TVscreen.

{ 16:9}Select this forwide-screen TV(frame ratio16:9).

BUseto select a setting and pressOKto conrm.



31/46

English

31




View Mode

Use view mode to scale an image that tsto the TV screens width and height.

AIn Video, pressto select { ViewMode}, then press .

{ Fill}Select this to scale the image up or downin horizontal and vertical directionsrespectively to ll the screen height andwidth.

{ Original}Select this to t the original screen size(only for MPEG).

{ Height Fit}Select this to scale the image up or downin vertical direction to t the screenheight.

{Width Fit}Select this to scale the image up or downin horizontal direction to t the screenwidth.

{ Auto Fit}Select this to take the minimum value ofhorizontal and vertical t scale ratio (likeletter box).

{ Pan Scan}Select this to take the maximum value ofhorizontal and vertical t scale ratio.


TV System

This menu contains the options forselecting the color system that matchesthe connected TV. For details, see page19.

Video Out

This setting allows you to toggle theoutput of the video signal betweenInterlaced and P-Scan (Progressive Scan).

AIn Video, press

to select { VideoOut }, then press .

{ Interlaced}Select this for Interlaced (YPbPr)connection.

{ P-Scan}Select this when you want to makeprogressive scan (YPbPr) connection onyour DVD player to a progressive scanTV.




32/46

English

32

Smart Picture

This DVD player provides fourpredened sets of picture color settings.

AIn Video, pressto select { SmartPicture}, then press .

{ Standard}Select this for a preset standard picturesetting.

{ Vivid}Select this to make the picture brighter.

{ Cool}Select this to make the picture softer.

{ Personal}Select this to personalize your picturecolor by adjusting the brightness,contrast, tint and color (saturation).


C If you select {PERSONAL}, then proceed

to stepsD~G. The setup menu appears.

Brightness 0

Contrast 0

Tint 0

Color 0

D Pressto highlight one of thefollowing options.

BRIGHTNESS

Increase the value to brighten the pictureor vice versa. Choose zero (0) foraverage setting.

CONTRAST

Increase the value to sharpen the pictureor vice versa. Choose zero (0) tobalance the contrast.

TINT

Increase the value to darken the pictureor vice versa. Choose zero (0) foraverage setting.

COLOR

Increase the value to enhance the colorin your picture or vice versa. Choosezero (0) to balance the color.

E Press to adjust the setting that bestsuits your personal preference.

FRepeat stepsD~Efor adjusting other

color features.G Press OKto conrm.






33/46

English

33




Using the Audio setup menu


Language

Video

Audio

Misc

Rating

Aspect Ratio :

View Mode :

TV System :

Video Out :

Smart Picture :

4:3

Auto Fit

NC

Personal

Language

Video

Audio

Misc

Front Speakers :

Center Speaker :

Surround Speakers :

Large

None

None

Rating

Digital Output :

Night Mode

Down Sampling

All

:Off

:On

Subwoofer :None

B Pressto select { Audio}, thenpress .


Example: { Night Mode} The options for the selected item

appears.

If the selection in the menu is greyed

out, that means the feature is notavailable or not possible to change atthe current state.


Example: { On} The setting is selected and setup is

complete.


Front / Center / Surround Speakers

You can adjust the volume level settingfor individual speakers.

AIn Audio, pressto select { FrontSpeakers}, { Center Speaker} or{ Surround Speakers}, then press .

{ Large}When connected speakers (except forsubwoofer) can produce low frequencysignals below 120Hz.

The range from 20Hz to 20KHz { Small}

When connected speakers (except forsubwoofer) can not produce lowfrequency signals below 120Hz. The range from 120Hz to 20KHz

{ None}No sound output from the speakers.Only applicable for center and rearspeakers.




34/46

English

34

Subwoofer

This option is only available forsubwoofer connection.

AIn Audio, press to select{ Subwoofer}, then press .

{ None}Select this option when no subwoofer isconnected.

{ Present}Select this option when a subwoofer is

connected.





Digital Output

Select this if you connect to amultichannel decoder/receiver.

AIn Audio, press to select { DigitalOutput}, then press .

{ Off}To deactivate the digital audio output.For example, if you use the FRONT (L/R)AUDIO OUT jacks to connect to a TVor stereo system.

{ PCM}Select this if the connected device is notcapable of decoding multichannel audio.The DVD player will convert the DolbyDigital and MPEG-2 multichannel signalsto PCM (Pulse Code Modulation).

{ All}Select this if the connected device has abuilt-in multichannel decoder thatsupports one of the multichannel audioformat (Dolby Digital, MPEG-2).


Tips: If { Digital Output } is set to { All }, allaudio settings except MUTE are invalid. If { Digital Output } is set to { All } whileplayback MPEG, MP3/WMA les, the playerwill output PCM signals.



35/46

English

35




Night Mode

This mode optimizes playback of sound atlow volume. High volume outputs will besoftened and low volume outputs arebrought upward to an audible level.

AIn Audio, press to select { NightMode}, then press .

{ Off}Turns off night mode feature. Select thisto enjoy the surround sound with its full

dynamic range. { On}

Select this to set low volume output. Thisfeature is only available for movie discswith Dolby Digital mode.


Down Sampling

You can enable and disable the digitalsignal for better sound output quality.

AIn Audio, press to select { Down

Sampling}, then press .

{ Off}Playback a disc recorded at the samplingrate of 96kHz. This rate can only beachieved in Stereo-Classic (Flat) mode.

{ On}Playback a disc recorded at the samplingrate of 48kHz.


Audio Output

You can set the audio output of the DVDPlayer.

AIn Audio, pressto select { AudioOutput}, then press.

{ Multi channel }All channels could output audio.

{Stereo}Only left channel and right channel couldoutput audio.


Tip: During Multi Channel mode you may notbe able to hear the complete spectrum ofmusic/dialogue through the amplier outputwith some Multi Channel discs.



36/46

English

36




Using the Rating setup menu


Language

Video

Audio

Misc

Rating

Language

Video

Audio

Misc

Rating

Aspect Ratio : 4:3Language

Video

Audio

Misc

Rating

Parental control : 8.Aduit

Set Password

B Pressto select { Rating}, thenpress .


Example: { Parental control} The options for the selected item

appears.

If the selection in the menu is greyed

out, that means the feature is notavailable or not possible to change atthe current state.


Example: { 8 Adult} The setting is selected and setup is

complete.


Rating level settings

Depending on the DVD, you may beasked to change the parental level whileplaying the disc. The rating levels arefrom 1 to 8 and are country dependent.You can prohibit the playing of certaindiscs that are not suitable for yourchildren, or have certain discs played withalternative scenes.

A In Rating, pressto select { Parentalcontrol}, then press .

BUse the alphanumeric keypad 0-9toenter the four-digit password (see page37 Changing the Password, then press.

{ 1.Kid Safe}Childsafe; acceptable for viewers of allages.

{ 2. G}General Audience; recommended asacceptable for viewers of all ages.

{ 3. PG}Parental Guidance suggested.

{ 4. PG 13}Unsuitable for children under age 13.

{ 5. PG R}Parental Guidance; recommended thatparents restrict children under 17 fromviewing.

{ 6. R}Restricted; recommended only whensupervised by a parent or adult guardian.

{ 7. NC 17}No Children under age 17; notrecommended viewing for children under

age 17. { 8. Adult}

Mature Material; should be viewed onlyby adults due to graphic sexual material,

violence or language.



37/46

English

37

CUseto select a rating level andpress OKto conrm. Select { 8 Adult} to disable parental

level and allow all discs to play.

DVDs that are rated higher than the levelyou selected will not play unless youenter your four-digit password.

Tips: This feature will not limit viewing if thedisc manufacturer did not code the disc.

VCD, SVCD, CD have no level indication,so parental control has no effect on thesetype of discs. This also applies to most illegalDVDs. Some DVDs are not coded with a ratingthough the movie rating may be printed onthe disc cover. The rating level feature doesnot prohibit play of such discs.

Changing the Password

You need to enter your four-digitpassword to play a prohibited disc or ifprompted for a password.

AIn Rating, pressto select{ Set Password}, then press OK. You will be prompted to enter your

four-digit password.

Password

BUse the alphanumeric keypad 0-9toenter the four-digit password. When doing this for the rst time,

enter the default password 0000.

If you forget your old four-digitpassword, enter the default password0000.

C Press OKagain to enter the new four-digit password. The new four-digit password will now

take effect.

NewPassword

D Press OKto conrm.






38/46

English

38

Using the Misc

(Miscellaneous) setup menu


Language

Audio

Misc

Rating

Language

Video

Audio

Misc

Rating

Language

Audio

Misc

Rating

Use Default Settings

35Volume

15Left

15Right

15Center

15Left Srnd

15Right Srnd

15Subwoofer

Center Spkr Delay : No Delay

B Pressto select { Misc}, then press.

C Pressto select an item, then pressOKto access.

Example: { Use Default Settings} The options for the selected item

appears.



Example: { No} The setting is selected and setup is

complete.


Restoring to the original settings

Setting the { Default } function will resetall options and your personal settings tothe factory defaults, except yourpassword for rating level.

AIn Misc, pressto select { UseDefault Settings}, then press OK. The menu will appear.

Use Default Settings

NOYES

{ Yes}Select this to reset to factory defaultsettings.

{ No}Select this to close the menu.

BUse to select a setting and pressOKto conrm.






39/46

English

39




Volume Control

AIn Misc, press to select { Volume35 }.

B Press to adjust the speakersvolume that best suits your personalpreference. The range from { 0 63}

C Press, then press to adjust thevolume corresponding speakers from 0-15.

OR

AYou can also press VOLUMEon theremote control to display the speakersvolume level on the TV screen.

B Press to adjust the speakersvolume level.

C Press OKor VOLUMEto exit.

Tip: The display will disappear if no buttonsare press within 5 seconds.

Speaker Delay

Delay times setting are related to thelistening position or distance for centerand surround speakers.

AIn Misc, pressto select { CenterSprk Delay} or { Surr Sprk Delay},then press OK.

BUseto move the slider to adjust thedelay times of the audio output from thecorresponding speakers.

C Press OKto conrm your selection.



40/46

English

40

Others

Software upgrade

Periodically Philips will issue softwareupgrade to enhance your userexperience.

IMPORTANT!

Power supply must not be

interrupted during upgrade!

To check the current software version ofthis DVD player;

A Press OPEN/CLOSEon the DVDplayer to open the disc tray. The disc tray will open.

B Press numeric keypad 966on theremote control. The software installed in the DVD

player appears on the TV screen.

To download and install the latestsoftware to the DVD player;

AVisit the Philips website www.philips.com/support to check the availability ofthe latest software upgrade.

BDownload the software to a CD-R.

C Insert the CD-R to the disc slot. The menu appears.

Firmware Update

CancelStart

Erase and Program

Firmware Update

Programming, please wait......

Do not switch the player off!

D Press to select { START}, thenpress OKto conrm. The latest software will be

downloaded in the DVD player.



41/46

English

41

Troubleshooting

Problem Solution

WARNINGUnder no circumstances should you try to repair the system yourself, as this will

invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, rst check the points listed below before taking the system for repair. If

you are unable to remedy a problem by following these hints, consult your dealer or

Philips for help.

No power.

Remote control does not work.

No picture.

The picture is distorted or black &white during playback.

No sound.

Disc does not play.

The aspect ratio of the screen cannotbe changed.

Press STANDBY-ON button on the front of the DVDplayer to turn on the system.

Make sure the AC outlet has power.

Aim the remote control directly at the sensor on the frontof the DVD player (not towards TV).

Remove any obstacles between DVD player and the remotecontrol.

Batteries are weak, replace the batteries. Check the polarities of the batteries are as indicated on the

remote control ( signs).

Turn on your TV and set to the correct Video In channelfor the DVD player. You may go to Channel 1 on your TV,then press the channel down button on your TVs remotecontrol until you see the TV program.

Check the video connection between the DVD player andthe TV.

The disc does not match with the TV color system standard(PAL/NTSC).

The disc is dirty, clean the disc. Sometimes a small amount of picture distortion may

appear. This is not a malfunction. To deactivate progressive scan function manually;

1) Turn off your TV progressive scan mode (or set tointerlaced mode)

2) Press OPEN/CLOSE to open the DVD player disc tray.3) Press the alphanumeric keypad 1 for few seconds.

Check the audio connections, the red and white jacks areconnected correctly.

Set the Digital output correctly, based on the equipment you connected to the DVD player.

Insert the disc with the label facing up. Wrong region code. Wrong disc type. Read chapter Playback from Disc -

Playable discs for details. Make sure the disc is not scratched or warped. Clean the

disc or replace a new one. Check if the disc is defective by trying another disc.

The aspect ratio is xed on the DVD disc. Depending on the TV, it may not be possible to change the

aspect ratio.



42/46

English

42

Problem Solution

Troubleshooting (continued)

Not able to select some items in thesetup/system menu.

The DVD player does not startplayback.

Picture freezes momentarily duringplayback.

Unable to select Progressive Scan on/off.

Press STOP button twice before selecting the setup/systemmenu.

Depending on the disc availability, some menu items cannotbe selected.

Insert a readable disc with the playback side facing down. Check the disc type, color system (PAL/NTSC) and region

code. Check for any scratches or smudges on the disc. Press SETUP to turn off the setup menu screen. You may need to enter the password in order to change the

parental rating level or to unlock the disc for playback. Moisture may have condensed inside the system. Remove the

disc and leave the system turned on for about an hour. Disconnect the power cord from the power outlet for a few

minutes. Reconnect the power cord and try to operate againas usual.

Check the disc for ngerprint/scratches and clean with a softcloth wiping from center to edge.

Check that the output of the video signal is turn to{ Interlaced }.



43/46

English

43

SpecicationsTV STANDARD (PAL/50Hz) (NTSC/60Hz)

Number of lines 625 525Playback Multistandard (PAL/NTSC)

VIDEO PERFORMANCE

Video DAC 14 bitYPbPr 0.7 Vpp ~ 75 ohmVideo Output 1Vpp ~ 75 ohm

VIDEO FORMAT

Digital MPEG 2 for DVD,SVCDCompression MPEG 1 for VCD

DVD 50Hz 60Hz

Horiz. resolution 720 pixels 720 pixelsVertical resolution 576 lines 480 lines

VCD 50Hz 60Hz

Horiz. resolution 352 pixels 352 pixels

Vertical resolution 288 lines 240 lines

AUDIO FORMAT

Digital MPEG/ AC-3/ compressedDigital

PCM 16, 20, 24 bits fs, 44.1, 48, 96 kHz MP3 (ISO 9660) 96, 112, 128,

256kbps &variable bit ratefs, 32, 44.1, 48 kHz

Analog Sound StereoDolby Surround compatible downmix from DolbyDigital multi-channel sound

AUDIO PERFORMANCE

DA Converter 24 bit, 192 kHzDVD fs 96 kHz 4Hz- 44kHz fs 48 kHz 4Hz- 22kHzSVCD fs 48 kHz 4Hz- 22kHz fs 44.1kHz 4Hz- 20kHz

CD/VCD fs 44.1kHz 4Hz- 20kHz

Line OutputSignal-Noise (1kHz) > 70 dBDynamic range(1kHz) > 60 dB

Crosstalk (1kHz) > 70 dBDistortion/noise (1kHz) >- 65 dB

Speaker OutputSignal-Noise (1kHz) > 70 dB

Dynamic range (1kHz) > 60 dBCrosstalk (1kHz) > 60 dBDistortion/noise (1kHz) >- 62 dBSpeaker Power Output@ 10%THD


44/46

English

44

Analog: Sound that has not been turned intonumbers. Analog sound varies, while digital soundhas specic numerical values. These jacks sendaudio through two channels, the left and right.

Aspect ratio: The ratio of vertical andhorizontal sizes of a displayed image. Thehorizontal vs. vertical ratio of conventional TVs. is4:3, and that of wide-screens is 16:9.

AUDIO OUT Jacks: Jacks on the back of theDVD System that send audio to another system(TV, Stereo, etc.).

Bit Rate: The amount of data used to hold agiven length of music; measured in ki lobits per

seconds, or kbps. Or, the speed at which yourecord. Generally, the higher the bit rate, or thehigher the recording speed, the better the soundquality. However, higher bit rates use more spaceon a Disc.

Chapter: Sections of a picture or a music pieceon a DVD that are smaller than titles. A title iscomposed of several chapters. Each chapter isassigned a chapter number enabling you to locatethe chapter you want.

Component Video Out Jacks: Jacks on theback of the DVD System that send high-qualityvideo to a TV that has Component Video In jacks(R/G/B, Y/Pb/Pr, etc.).

Disc menu: A screen display prepared forallowing selection of images, sounds, subtitles,

multi-angles, etc recorded on a DVD.

Digital: Sound that has been converted intonumerical values. Digital sound is available whenyou use the DIGITAL AUDIO OUT COAXIAL orOPTICAL jacks. These jacks send audio throughmultiple channels, instead of just two channels asanalog does.

Dolby Digital: A surround sound systemdeveloped by Dolby Laboratories containing up tosix channels of digital audio (front left and right,surround left and right, center and subwoofer).

JPEG: A very common digital still picture format.A still-picture data compression system proposedby the Joint Photographic Expert Group, whichfeatures small decrease in image quality in spite ofits high compression ratio.

MP3: A le format with a sound datacompression system. MP3 is the abbreviation ofMotion Picture Experts Group 1 (or MPEG-1)Audio Layer 3. By using MP3 format, one CD-R orCD-RW can contain about 10 times as much datavolume as a regular CD can.

Multichannel: DVD is specied to have eachsound track constitute one sound eld.Multichannel refers to a structure of sound trackshaving three or more channels.

Parental Control: A function of the DVD tolimit playback of the disc by the age of the usersaccording to the limitation level in each country.The limitation varies from disc to disc; when it isactivated, playback will be prohibited if thesoftwares level is higher than the user-set level.

PCM (Pulse Code Modulation): A system forconverting analog sound signal to digital signal forlater processing, with no data compression used inconversion.

Playback control (PBC): Refers to the signalrecorded on video CDs or SVCDs for controllingreproduction. By using menu screens recorded ona Video CD or SVCD that supports PBC, you canenjoy interactive-type software as well as softwarehaving a search function.

Progressive Scan: It displays all the horizontallines of a picture at one time, as a signal frame.This system can convert the interlaced video fromDVD into progressive format for connection to aprogressive display. It dramatically increases thevertical resolution.

Region code: A system for allowing discs to beplayed back only in the region designatedbeforehand. This unit will only play discs that have

compatible region codes. You can nd the regioncode of your unit by looking on the product label.Some discs are compatible with more than oneregion (or ALL regions).

Title: The longest section of a picture or musicfeature on DVD, music, etc., in video software, orthe entire album in audio software. Each title isassigned a title number enabling you to locate thetitle you want.

TV OUT jack: Jack on the back of the DVDSystem that sends video to a TV.

WMA: Windows Media Audio. Refers to anaudio compression technology developed byMicrosoft Corporation. WMA data can beencoded by using Windows Media Player version 9or Windows Media Player for Windows XP. Files

are recognized by their le extension WMA.

Glossary



45/46



46/46

CLASS 1

LASER PRODUCT

SgpSL-0721/94-2

DVP 3136

Meet Philips at the Internethttp://www.philips.com/welcome

English