PETROLEUM CENTRIFUGE TUBESFor determination of water and sediment in crude oil
Proprietary Permanent Marking Technology• Markings and graduations applied using proprietary Lazer-Fused™ technology
• Superior resistance to aggressive solvents used in separation processing
• Unmatched readability and line uniformity throughout entire graduation range
Outstanding Volumetric Accuracy • The internal diameter is carefully controlled to maintain an accurate and reproducible tube
• The Lazer-Fused™ tubes provide the highest level of marking accuracy available
• Conforms to volume graduation requirements specified in API MPMS Chapter 10.4
• Tightest volumetric tolerance compared to competitors’ tubes
Improved Durability
• Lazer-Fused™ marking technology reduces the potential weaknesses acid and mechanical etching may cause
• Exceeds API MPMS Chapter 10.4 minimum RCF 500 x g centrifuge requirement
Readily Available• Products are manufactured in the US
• Short lead time with rapid order response
Graphic Customizations• Customized graphics available upon request
(i.e. QR code, Logos, Personalization - contact your sales
representative for additional details)
Excellent value• Following strict manufacturing practices combined with new Lazer-Fused™ technology, the Kimble Petroleum
Centrifuge Tubes offer the quality and performance you need at an exceptional price
45243LF-200 Volumetric Accuracy at 10 mL Test Point
Competitor 1 Competitor 2 Competitor 3 Kimble Lazer-Fused™ Tubes
ABC PETROLEUM
Part Number Description
Capacity (mL)
OD (mm)
Length (mm)
Max RCF
Case Qty
45241LF-100 Laser-Fused™ 8” Oil and Weathering (End Point Index) Centrifuge Tubes
100 37 203 800 12
Lazer-Fused™ 6” SHORT CONE CENTRIFUGE TUBES
For determination of water and sediment in crude oil
• Calibrated to contain
• 45243LF-200 is graduated in percent (200% equals 100 mL)
• Top is tooled to accept snap cap 28150R-6
Part Number Description
Capacity (mL)
OD (mm)
Length (mm)
Max RCF
Case Qty
45240LF-100 Laser-Fused™ 8” Long Cone Oil Centri-fuge Tube
100 37 203 800 12
Lazer-Fused™ 8” LONG CONE CENTRIFUGE TUBES
Used in the determination of water and sediment in crude mineral oils, fuel oils and other petroleum products (D1796 and MPMS 10.4 standards); in determination of volume of precipitate, black oils and other lubricating oils (ASTM D91 and D128); and in testing for acidity of distillation residues or hydrocarbon liquids of gasoline or petroleum solvents (ASTM D1093).
• Calibrated to contain
• Top is tooled to accept snap cap 28150R-6
• Referenced in ASTM D4007
Lazer-Fused™ 8” OIL AND WEATHERING (END POINT INDEX) CENTRIFUGE TUBES
Can be used in the determination of residues in Liquified Petroleum (LP) gases, ASTM Method D2158
• Calibrated to contain
• Top is tooled to accept snap cap 28150R-6
ACCESSORIES
Part Number Description
CaseQty
28150R-6 Yellow polyethylene snap cap 6
Part Number Description
Capacity (mL)
OD (mm)
Length (mm)
Max RCF
Case Qty
45243LF-100 100 mL Laser-Fused™ 6” Short Cone Oil Centrifuge Tube
100 45 165 800 12
45243LF-200 200% Laser-Fused™ 6” Short Cone Oil Centrifuge Tube
100 (200 %) 45 165 800 6
Top Related