Quicke Versa-XSeries - Mid-range Loaders ~ Oringinal Implements
2016
Retail Price List V2.0
Page Recommendations PageB1 Counterweight and Bucket Recommendations C1B2 Implement – Loader Recommendations C2B3 Implements PageB4 Buckets – H, HT, HD, HV, HDV C3B5 Special Buckets – B6 Multipurpose (4 in 1), Hy-Tipping, Grading and Precision B7 Bucket Grabs –
Tractor Make Subframe Multibenne, Powergrab SE, Powergrab BOHCase IH DM and US B8 Forks and Grabs – Claas DM and US B9 Manure fork, Silograb, Silocut SGII and Maxi GrappleDeutz DM B10 Bale Handling – Round bale handling & Square bale handler C7Fendt DM B11 Square bale forks (fixed and hinged), Fiat US B12 Lifting – Pallet Forks,Ford US B12 Lifting – Big Bag Lifter, Single, Dual and Triple Bag
John Deere DM and US B13 Other Implements – Kioti DM B14 3 Point Linkage Hitch, Stone Fork, Silo Split
Kubota DM B15 Skidsteer Implements – Landini DM and US B16 Buckets, Bales Spikes, Pallet Forks and Weld On Hooks
Massey Ferguson DM and US B17 Hook Types - LoaderMcCormick DM B18 Euro, Alo Type 3, Trima and MX Hooks (including dimensions)
New Holland DM B19 Hook Types - TelehandlerSame DM B20TYM DM B21
Valtra DM B22Zetor DM B24 Other Info Page
Helpful InformationWeights of Material Chart, Conversion ChartsContact Info, Carriage Charges and important info Inside back
C11
C8
C9
C11
C12Claas Scorpion, JCB Q-Fit, Manitou, Matbro Pin and Cone, Merlo, Volvo Large BM
CONTENTS
User GuideSpecification Versa-X SeriesLoader Info and PricesHydraulic info, Subframe Codes, Types and WidthsLCS ErgoDrive, EasyDrive, ElectroDrive and Options
C4
C10
Page
Belarus, Hurlimann, Lamborghini, Older Renault, Steyr and Ursus Contact Alo UK
C6
C5Adapters and Tool Carrier OptionsLoader Options and Hydraulic Conversion Kits
2
Ordering Information
1 Take down the Model and type of implement you require
Model example - Silograb 170 (170 = 1.70m wide)
Not a recommended match 2 Make and Model of front loader or handler for some AgLine implements
The loader will NOT fit the tractor. 3 Type of hook system required
8,150 US subframes available only 4 Note the discount code A or B and retail price
US subframes only 5 Email your order to your area manager or to [email protected].
1 Only use the recommendations in this price list.
B1
A guide to using this dealer price list Please read this information carefully
This price list has been designed to ensure choosing a Quicke® Versa-X loader and Original Implement™ and correctly matching them to the tractor in a simple operation.Use the following guidelines to assist you…
Loaders AgLine1 Choose a loader compatible to your requirements from the specification sheet on page 2 and 3 of the
price list.Choose the implement you require
Use the recommendatiins as a guide to chose to correct implement for you tractorSelect the appropriate price sheet for the tractor to which the loader is to be fitted.
Price includes Euro tool carrier, mechanical latching, factory fit 3rd service.
Parallel Loader.
Price includes Euro implement carrier, mechanical latching and factory fit 3rd service .
Select the tractor model from the left-hand column and the loader model along the top row of the sheet. If there is a price specified at the intersection of the column and row, this is a recommended match for the tractor and loader.Four other possibilities should be noted here…
a. No price specified
b. Black Intersection
c. Shaded Intersection
d. Loader format not available
Rear counterweight must be used with front loaders in accordance with regulation EN 12525 (See page C 1)
Should you wish to discuss your choice in more detail, please contact your local Alo UK Area Manager (phone numbers are in the inside back cover) or contact the Alo UK Sales Office direct on 01299 250922, Fax 01299 250944, E-mail: [email protected]
Alo UK price list covers all UK markets excluding Northern Ireland. All prices are in Pounds Sterling.All prices are excluding VAT. We hold a policy of continuous improvement. We reserve the right to change product specification and prices at any time without prior notice.
The price specified at the intersection comprises of the following components:
Subframe. (Also refer to page B4)
Short subframes (price code DS or DM) usually mount from the front bolster of the tractor to the front of the transmission. Long subframes (price code DSX or DMX) run the entire length of the tractor, to the rear axle. Tractor front grille-guards (if applicable) are included in the price. Some ‘DMX’ subframes are priced as ‘DM’. Occasionally additional items (e.g. Exhaust elbows, Power beyond plates etc) may also be required but not necessarily specified; therefore it is important to check with our sales office before calculating the final price. On some occasions, it may be necessary to obtain optional parts from the tractor manufacturer.When a shaded intersection is shown, a US subframe is used
2nd year warranty on Silocut SG covers structure only and does not include any wearing part(s) or hydraulic components.
2Alo UK will not accept any responsibility if damage or failure occurs as a consequence or an incorrect implement to tractor/telehandler combination. I.E. Implement too large for loader/handler, .loader/handler is too large for implement
3
The Machinery Directive 2006/42/EC applies to all material handling machinery and should be interpreted in conjunction with all ROPS (Roll Over Protection Structure) and *FOPS (Falling Object Protection Structure) to ensure operator protection. Please familiarise yourself with Machinery Directive 2006/42/EC.*Do not mount a non-parallel loader to a tractor without FOPS*
Hydraulic Valves
ErgoDrive LCS mono-lever control valve comes in either Open Centre (OC) or Load Sensing (LS) configuration.EasyDrive LCS Code “EY” (EasyDrive) is also available or upgrade to ElectroDrive LCS Pro.Hose kit options may also be available for you tractor.Note – a conversion kit may be required depending on loader/hydraulic combinationFinally, choose from our large selection of implements at the rear of the price list.
4
Ensure the implement is right for your machineEnsure you check that your implement selection is recommended for your loader or the
work to carry out.Non parallel Loader.
Loader Model X21 X31 X41 X51 X26 X36 X46 X56Standard equipment →
Tractor size 40-60 50-70 60-90 70-120 40-60 50-70 60-90 70-120
Lift height to pivot pin m 3.10 3.40 3.70 3.90 3.10 3.40 3.70 3.90
Lift height under level bucket m 2.86 3.16 3.46 3.66 2.86 3.16 3.46 3.66
Lift capacity max lift height 80 cm from pivot pin Kg 870 970 1010 1080 1220 1520 1590 1680
Lift capacity 1,5 m lift height 80 cm from pivot pin Kg 1210 1370 1520 1670 1400 1560 1710 1890
Breakout force 80 cm from pivot pin Kg 1450 1600 1770 1960 1580 1660 1850 2080
Lift capacity max lift height at pivot pin Kg 1530 1700 1800 1890 1240 1410 1510 1600
Lift capacity 1,5 m lift height at pivot pin Kg 1840 2030 2220 2390 1500 1690 1870 2040
Breakout force from pivot pin Kg 2360 2510 2730 2940 1950 2100 2320 2520
Max tear-out force 1,5 m lift height 800 mm out from pivot pin 1930 1980 2460 2950 1560 1970 2440 2930
Rollback angle (degrees) Min 42 44 42 43 42 44 42 43
Dump angle (degrees) Min 50 50 49 46 50 50 49 46
Lifting time to max lift height at 60 l/min Sec 4.1 4.8 4.1 4.7 3.5 3.1 3.6 3.6
Parallel device
3rd service
Softdrive
Loader to subframe securing system
Loader weight Kg 310 335 360 390 360 390 420 445
Subframe type loader will mount to DM DM/US DM/US DM/US DM DM/US DM/US DM/US
Versa-X Series Loader SpecificationNON PARALLEL PARALLEL
Euro tool carrier and 3rd Service Euro tool carrier and 3rd Service
Ver
sa-X
Serie
s
No Yes
Yes Yes
No No
Deluxe Locking handle pin Deluxe Locking handle pin
B 3
X21 £2,550 X26 £3,350X31 £2,850 X36 £3,650X41 £3,350 X46 £4,150X51 £4,250 X56 £5,050
Some Versa-X features at a glance
Quicke Versa-XSeries The new Versa-X loader series
A Versatile Mid-Range Loader! Our new product program addressing the small to mid-size tractor range.8 loader models recommended for tractors from 40 to 110 hp
Loaders designed to fit on to the Delta subframe system and LCS hydraulic system ErgoDriveBest visibility in its class
Version with US bearing box available for used tractor market (not available on X21 and X26)
Non Parallel Parallel
Deluxe locking Excellent visibility Curved parallel rod Low cross-tubeGreat hitching visibilityProtected 3rd service
Standard EquipmentEuro Tool Carrier only
3rd service valve (if 3rd service is not required, deduct £250)
Deluxe Subframe LockingCable operated valve (ErgoDrive)
Subframe (Delta or US)When purchased as a package to mount to tractor
Euro Combi 8 + 5 tool carrier available - £200Alternative Skidsteer tool carrier available - Factory
B 4
Max system pressure: 250 bar
Max tank pressure: 20 bar
Pilot oil pressure: 23 bar
Max rec' flow, fixed pump: 120 L/min
Max rec' flow, variable pump: 150 L/min
Regulated flow to loader: Max 90 L/min
OC & LS £1,075 DM £1,595DMX £1,795
SHK £575HK (Deluxe) £1,275 S
SXEY £1,575E £1,875
Cable Controlled (ErgoDrive) Delta System
Hydraulic Data. Subframe TypesOpen Centre Hydraulic System Delta Subframe DM and DMX
Normally, manufacturers specified values are obtained at a hydraulic oil pressure of 185 bars
with a flow rate of 60 litres per minute.
Please note that on tractors with open centre hydraulic systems, 60 litres per minute is normally
quoted at rated engine RPM (i.e 2150 rpm).
A. 60mm Subframe saddle close to loader beam pivot point.B. 30 mm upright.C. 200 or 250 mm deep upright.BenefitsVertical point coupling.Larger dimensioned subframe.Maximum space for tractor servicing.
LCS Technical Data
Delta subframes have heavy duty dimensions, with many contact surfaces, all featuring precision machining. Details such as the 60mm wide saddle and the 40mm locking pin enable the loader to cope with difficult and heavy jobs for many years.
US SubframeVersa-X loaders are also available with US bearing boxes (except X21/X26) , so that they can mount to their respective US subframes.US loader width – 900mm
1. Previous model Quicke loader mounted to US subframes where the customer wants to update the loader but not the tractor.2. If a Delta subframe is not available for an older tractor model.
Hydraulic Kit Prices Subframe Codes and Prices
Note - When a US subframe is ordered with a loader and hydraulic set, the subframe cost is
£1595
Hose SetUS System
£1,795Electric Controlled
1040mm
"DM" Delta wide
"US" system
900mm
A
C
B
PT
LS
T
P
Serial
Load Sensing Open Centre
B 5
OCLS
Part No TJ107Price £120
MC4 replaces individual flat face couplers
LCS MultiCoupler MC4Single multicoupler for
LCS control valve. Mounts directly to control valve, incorporates electrical
connector
Part number5220530
Price £295
Hose Sets (If available for your tractor)
For the professional user
Hose Sets (If available for your tractor)
Price £1,275
Operates via the tractors own armrest joystick.
May require additional components from tractor
manufacturer.Consists of -
Diverter valve, hoses, switches, harness
Couplers
Price E £1,875
CANbus Electro-Hydraulic Valves
Monolever and Control Valve
Monolever c/w 3rd service and electric Softdrive switch
£1,075
Loader Control System
Do
you
need
a C
onve
rsio
n K
it fo
r you
r loa
der o
r tra
ctor
?
ErgoDrive LCS Kits
Price
Loader hoses connect via individual flat face couplers
Relay Kit
£1,575ElectroDrive Professional
EasyDrive LCS has similar functions as ErgoDrive plus Bucket Shake.
Kits include joystick mounting brackets.
EasyDrive
Price EY
You can adapt EasyDrive to operate a front linkage. Relay kit must be ordered with a Versa-X loader
Unique ergonomically designed electronic joystick,Ideal for tractors where
a cable operated joystick is not suitable.Thumb
controlled joystick.LCS EasyDrive
Electric Joystick and Control Valve
See Options and Conversion Kits page for other options
Price
Loader hoses connect via individual flat face couplers
£575
Standard kit connects to aux' valve including
mid-mount valves.May require additional
components from tractor manufacturer.
Relay Kit to operate higher current 3rd service diverter
valves in conjunction with LCS EasyDrive or ElectroDrive
LCS ElectroDrive Professional
As EasyDrive - but with additional Tortoise mode, Bucket shake, Visual AAC, On/Off 3rd service, Locked 3rd
service function, Continuous 3rd service function, Fast function, 3rd
service speed configuration, Programmable quick select button plus
more configuration settings...
Also required if operating additional diverter on 3 point
linkage
Valve type shown, may not be available for your tractor
Individual couplers are supplied standard with new loaders
B 6
Price £250 Price £200
1 2 3
Part No 5034021 Part No 5034071 Part No 5044970
Price £80 Price £225 Price £295
4 5
Part No 5034083 Part No 5034067Price £150 Price £195
Loader Options 3rd Service SoftDrive Manual Control
Standard fitmentMounts to left hand side of
loader bearing box. Manual shut off.
Retrospective fit
Deduct £250 if 3rd service is not required on loader
10550478
Interface Kit
This kit allows LCS Versa-X loaders to mount onto the
previous valve system using ½” quick release couplings.
This kit allows LCS version Versa-X loaders to mount onto the previous valve system fitted with Hydro
Quick/MultiDoc.
Allows LCS loader with Multicoupler and flat face
individual couplers to connect to an existing valve type.
Ideal when using one loader on two tractors - 1 x pre-LCS and
one x LCS. Kit. Kit 1 or 2 also requiredMale 7 pin - Female multi pin Male 7 pin - Female multi pin
½” Coupler Kit Hydro Quick Coupler KitVERSA-X LOADER onto pre-LCS HYDRAULICS (New loader to old valve)
10550480 Non-Parallel loader
5034241 Mounts to all loaders
Retrospective fit
Conversions and Additional Kits
Parallel Loader
See Other Options page for older loader options
Valve not inc'.
LCS ADDITIONAL KITSAdditional Accumulator Hose Interface KitFor EasyDrive and ElectroDrive
This kit allows LCS Quicke Dimension loaders to mount onto the Pre-LCS hose sets using the Multicoupler MC4
and individual flat face couplers.
This accumulator kit must be ordered for tractors that are fitted with a gear pump and the tractor auxiliary spools operate as a load sensing
system
Coloured loaders
Coloured Loader
Case redClaas greenDeutz greenFendt green
John Deere greenKubota orange
Landini blueMcCormick red
New Holland blueSame red £200
If the colour you requireis not listed, please check availability of your colour
choice with your Alo UK Area Manager.
B 7
Price £200 5201318 £400 5201251 £400
5221300-7 £0 830585 £400 830600 £400
Adapters and Tool Carrier OptionsQuicke No 5 (SMS) Adapter Alo No 3 Adapter
Skidsteer Tool Carrier
Alo No 3 Implements
Retrospective fit adapter
Quicke No 5 implementsWill fit from Euro
No 8 tool carrierto Quicke No 5 hooks.
Faucheuximplements
Retrospective fit adapter
Will fit from Euro No 8 tool carrier to Faucheux
(McConnel)implement hooks.
Retrospective fit adapter
Factory fitment only
Faucheux/McConnel Adapter
Will fit to Skidsteer implements only with Individual latch levers
Will fit from Euro No 8 tool carrier
to Alo No 3 implement hooks.
Mailleux/MX Implements
Retrospective fit adapter
Will fit from Euro No 8 tool carrierto Mailleux/MX
implement hooks.
Mailleux/MX Adapter
Euro Combi 8 + 5 Tool Carrier
Will fit Euro No 8 andQuicke No 5 hooks.
Euro & Quicke No 5 implements
Factory fitment only
Skidsteer Hooks
10550180 £60Connects to implement hoses
Selecto Fix
mounts to tool carrier.Loader Part
Implement Part
5221553 £250 Perfect visibility for implement connection Simple implement connection
Check out our full range of implements later in this price list
Quicke Versa-XSeries
B 8
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NB Max front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
X 5,520 6,020 6,920 6,320 6,820 7,720 SX OC
X 6,920 7,720 SX OC
6,020 6,820 DM OC
12,4 x 24 5,520 DM OC LS
A, E 12,4 x 24 5,520 DM OC LS
A, E 380/70 R24 6,020 6,920 6,820 7,720 DM OC LS
A 12.4 x 24 5,520 6,020 6,320 6,820 DM OC
A 13.6 x 24 6,020 6,920 6,820 7,720 DM OC
A, N 9,5 x 24 5,220 6,020 DM OC
A 11.2 R24 5,220 5,520 6,020 6,320 DM OC
A 14,9 x 24 5,520 6,020 6,320 6,820 DM OC
J, P 280/85 R24 5,220 5,520 6,020 6,320 DM OC
M, P 14,9 x 24 5,520 6,020 6,320 6,820 DM OC
A, K 480/65 R24 5,520 6,020 6,320 6,820 DM LS
A, L 480/65 R24 5,520 6,020 6,320 6,820 DM LS EY
A 11,2 x 24 5,220 5,520 6,020 6,320 DM OC
A 13,6 x 24 5,520 6,020 6,320 6,820 DM OC
A 14,9 x 24 6,020 6,920 6,820 7,720 DM OC
A 320/70 R24 5220 5,520 6020 6320 DM OC
A 13,6 x 24 5,520 6,020 6,320 6,820 DM OC
A 540/65 R24 5,520 6,020 6,320 6,820 DM OCC, F
G, H, S 480/65 R28 6,020 6,920 6,820 7,720 DM HK OCF G, H, S 480/65 R28 6,020 6,920 6,820 7,720 DM HK OC
B, F 16,9 x 24 6,020 6,920 6,820 7,720 DM LSC, D F, G 480/65 R28 6,020 6,920 6,820 7,720 DM LS OC
A DMX subframe priced as DM G Deluxe Hose kit only with Multi Controller arm rest M State if front axle support is cast or welded.B Tractor must be equipped with power beyond plate H Tractor must be ordered with loader ready Multi Controller joystick N The subframe set is adapted for tractors with ROPS or Lochmann cab.C Additional kit 10377122 may be required for axle suspension J Subframe will fit with Folger front linkage P Serial Number of tractor requiredD Check type of front hitch mounted to tractor K ErgoDrive will not fit with mid-mount valve S CNH loader ready harness requiredE Check tractor hydraulic system - LS or OC L ErgoDrive not available X US and UM subframe - NOT DM Lock & GoF Will not fit tractors with wide weight carrier For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd service
5120
844, 856XL CMFD
CS 78, 80, 86, 90, 94, and 85, 95, 100, 105 pro
Euro tool carrier, 3rd service
ParallelNon-ParallelType
Case IH785, 885, 985, 795, 895, 995, 4220 - 4240
956, 1056 XL CMFD
CS 68, CS 75
MAXXUM 110, 120, 130 Multicontroller 4 cyl EP
MX 80c, MX 90c, MX 100c
MXU 100, MXU 110 + X Line
JX 55 - JX 70 and Tier 3
JX 75, JX 80, JX 85, JX 90 and Tier 3
JX 95 and Tier 3
JXC 1060 - JXC 1095, Quantum 65C, 78C, 85C, 95C
JXU 70 - JXU 115
CX 70 - CX 85
CX 95 - 105
Farmall 65A 75A
JXU 1070 - JXU 1100
MAXXUM 100, 110, 120, 130 Multicontroller, X Line 4 cyl
Farmall 85A, 95A, 105A, 115A
Farmall 55C, 65C, 75C
Farmall 85C, 95C 105c and 115C EP
Farmall 95U, 105U, 115U
Farmall 95U Pro, 105U Pro, 115U Pro
Farmall 55A
B 9
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NB Max front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
440/65 R28 5,520 6,020 6,320 6,820 SX LS OC
440/65 R28 5,520 6,020 6,320 6,820 SX LS OC
B 440/65 R28 6,020 6,920 6,820 7,720 DM LS OC
B, E 440/65 R28 6,020 6,920 6,820 7,720 DM LS OC
D, F 340/85 R24 6,020 6,920 6,820 7,720 DM OC HK
D 340/85 R24 6,020 6,920 6,820 7,720 DM OC HK
C 480/65 R28 7,120 7,920 DMX LS OC
H,J 480/65 R28 6,920 7,720 DM LS HK
D, L 360/70 R24 5,520 6,020 6,320 6,820 DM OC
D, L 420/85 R24 5,520 6,020 6,320 6,820 DM OC
D, F 340/85 R24 6,020 6,920 6,820 7,720 DM OC
A, D 440/65R28 6,020 6,920 6,820 DM OC
G 320/85 R20 5,220 5,520 6,020 6,320 DM OC
G, K 320/85 R20 5,220 5,520 6,020 6,320 DM OC
280/70 R18 5,220 5,520 6,020 6,320 DM OC
280/70 R20 5,220 5,520 6,020 6,320 DM OC
A Will fit with Lemoine front hitch. Will also fit w/o front hitch G X21/26 will not fit in combination with front hitch X US subframe - NOT DM Lock & GoB Subframe prepared with spacers for front hitch H Check if tractor is fitted with factory fitted siderails C Check if load sensing and or open centre J Deluxe hose set will not fit with hydraulically extendable trailer hitchD DMX subframe priced as DM K The hydraulic set will not fit tractors with electro hydraulic valve.E Check if tractor has Arion style hydraulic system L Loader X31/X36 will not fit tractors with front wheels larger then 420/70 R24.F Hose kit mounts to midmount valve and electric joystick. For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
Euro tool carrier, 3rd service
Parallel
Elios 210, 220, 230
Axos 310, 320, 330, 340
Arion 530, 540, 550 CIS/CEBIS Tier 4i
Type Non-Parallel
Ceres 75 - 95X (JD engine)
Ceres 75X, 85X 95X
Arion 410, 420, 430, 440, 450, 460 Tier 4
Elios 210, 220, 230 and 240 Tier4i
Atos 330, 340, 350
Atos 220, 230, 240
Hyd
raul
ic
Opt
ion
Prices - £ Sterling
Sub
fram
e
Ares 546, 556, 566
Celtis 426, 436, 446, 456
Nectis 217, 227, 237, 257, 267, VL
Ares 547, 557, 567, 577
Arion 510, 520, 530, 540 CIS/CEBIS
Arion 410, 420, 430
Nectis 227, 247, 257, 267 F
ClaasEuro tool carrier, 3rd service
B 10
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NBMax front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
420/65 R24 6,020 6,820 DM OC
420/65 R24 6,020 6,820 DM OC
420/65 R24 6,020 6,820 DM LS HK
A, E 280/85 R20 5,220 6,020 DSX OC
A, M 11.2 R24 5,220 6,020 DSX OC
A 320/70 R20 5,220 6,020 DSX OC
E 320/70 R24 5,520 6,020 6,320 6,820 DM OC
A 420/65 R24 5,520 6,020 6,320 6,820 DM OC
320/85 R20 5,220 5,520 6,020 6,320 DM OC
B, D 320/85 R24 5,220 5,520 6,020 6,320 DM OC
13.6 x 24 6,020 6,920 6,820 7,720 DM OC
J 13.6 x 24 6,020 6,920 6,820 7,720 DM LS
F, M 6,020 6,920 6,820 7,720 DM LS OC
F, G, L 540/65 R34 6,920 7,720 DM LS OC
G 560/85 R28 6,020 6,920 6,820 7,720 DM LS
G, H 560/85 R28 6,020 6,920 6,820 7,720 DM LS
G 560/85 R28 6,020 6,920 6,820 7,720 DM LS
N 360/70 R20 5,220 5,520 6,020 6,320 DM LS
N 360/70 R20 5,220 5,520 6,020 6,320 DM LS
G 560/85 R28 5,520 6,020 6,320 6,820 DM LS
DM LS
A 4WD tractors only G Order accumulator kit 5034083 with EasyElectroDrive (£150) N Subframe not adapted for under slung (horizontal) exhaust pipe.B Front weight carrier must be removed in combination with X21 and X26 H Order Additional kit 5034301 for tractors with a front linkageC X21 and X26 will not fit in combination with front hitch J If Sauter front hitch fitted, contact SouterD Remove front weight carrier in combination with X21 and X26 L Special plug required if tractor has no front suspension (SDF - 04454514.4)E If tractor has Lochmann cab contact your area manager M Will fit with ROPS and Lochman cab.F Electric or Deluxe hose kit only on Profiline L/S verion For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
Agrolux 4.75 and 410
Agroplus 410, 420 and Ecoline
Agrotron 4.70, 4.80, 4.85, 4.90, 4.95
Agrotron 80, 85, 90, 100
Agrotron M410, M420
5090C, 5100C, 5110C
5090.4 D, 5090.4 D Ecoline and 5100.4 D
5100, 5110, 5120, 5130 Basic
5100, 5110, 5120, 5130 Profiline, TTV
5080D, 5090D D and Ecoline
Prices - £ Sterling
Hyd
raul
ic
Opt
ion
Sub
fram
e
Euro tool carrier, 3rd service
Type Non-Parallel Parallel
Agrotron K90, K100, K120 and K410, K420, K430
Euro tool carrier, 3rd service
DeutzAgrofarm 85, 100
Agroplus 310, 315, 320 Ecoline
Agrolux 77, 87, 97
Agrolux 45, 55, 60, 65, 70, 310, 320
Agrofarm 420, 430 Profiline and TTV
Agrolux 57, 67
Agrofarm 410, 420, 430
Agroplus 75, 85, 95, 100
5090.4G, 5105.4G, 5115.4G
Check out our full range of implements later in this price list
Quicke Versa-XSeries
B 11
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NB Max front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
405/70 R20 5,520 6,020 6,320 6,820 DM LS
13.6 R24 6,020 6,920 6,820 7,720 DM OC
480/70 R28 6,020 6,920 6,820 7,720 DM OC
405/70 R20 6,020 6,920 6,820 7,720 DM LS
A 405/70 R20 5,220 5,520 6,020 6,320 DM LS HK
6,020 6,820 DM LS HK
5,520 6,020 6,320 6,820 DM LS HK
B 13.6 R24 6,020 6,920 6,820 7,720 DM OC HK
C,D 13.6 R24 6,020 6,920 6,820 7,720 DM OC HK
C,D 480/65 R24 6,020 6,920 6,320 6,820 7,720 DM OC HK
B, C, G 540/65 R24 6,020 6,920 6,820 7,720 DM OC HK
C,DE, F 480/65 R24 6,920 7,720 DM LS HK
D, E, F 540/65 R26 6,920 7,720 DM LS HK
A Order additional kit 10377143 for tractors with hyd' trailer brake G The Easy/ElectroDrive will not fit tractors without rear LS & P-connection.B 1000kg Counterweight must be used with X51/X56 loaderC Hose kit adapted to mount to Fendt mullti coupler.D Remove front hitch arms when using loaderE State if tractor is equipped with air tank (for hose kit)F Fendt CANbus harness required on tier 3 version tractors for 3rd/4th service. 0074.020.208.000 For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
Farmer 309, 310 LS/LSA
Farmer 311, 312
411, 412, 413, 414, 415 Vario
Fendt
409, 410, 411, 412
307C, 308C, 309C
310, 311, 312, 313 Vario SCR
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd service
Non-Parallel Parallel
206S, 207S, 208P, 209P, 210P, 211P
Farmer 304, 305, 306, 307, 308 LS/LSA
Euro tool carrier, 3rd service
309, 310, 311, 312, 313 Vario
Favorit 509, 510C
309, 310, 311, 312, 313 Vario SCR
Type
209P, 210P, 211P Vario
207, 208, 209, 210, 211Vario
B 12
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NB Max front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
X 11,2 x 24 5,520 6,320 S OC
X 5,520 6,320 SX OC
X 5,520 6,320 SX OC
X 11,2 x 25 5,520 6,320 SX OC
X 5,520 6,020 6,320 6,820 SX OC
X 12,4 x 24 5,520 6,320 SX OC
X 5,520 6,020 6,320 6,820 SX OC
X 13,6 x 24 5,520 6,020 6,320 6,820 SX OC
14,9 x 24 6,020 6,820 SX OC
14,9 x 24 6,920 7,720 SX OC
14,9 x 28 6,920 7,720 SX OC
X 5,520 6,320 S OC
X 5,520 6,320 SX OC
X 12,2 x 24 5,520 6,020 6,320 6,820 SX OC
X 5,520 6,020 6,320 6,820 SX OC
X 5,520 6,020 6,320 6,820 SX OC
X 13,6 x 28 6,020 6,920 6,820 7,720 SX OC
X 13,6 x 28 6,920 7,720 SX OC
X 6,920 7,720 SX OC
X US subframe - NOT DM Lock & Go
For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
Prices - £ Sterling
Euro tool carrier, 3rd serviceFiat & Ford
Euro tool carrier, 3rd service
Type Non-Parallel Parallel
F 100, 110, 115, 120, 130 and 140
Hyd
raul
ic
Opt
ion
55-90, 60-90 and 65-90
60-66, 65-66, 70-66 and 80-66
100-90 and 110-90
90-90
70-90, 80-90 and 85-90
Ford
Fiat
Sub
fram
e
7810
4630, 4830, 5030
3430, 3930, 4130
4610 4wd
6810, 7610, 7710
5000, 6600, 5110, 5610, 6410, 6610 4wd
6410, 6610 4wd
6710, 7000, 7410, 7600
60-66, 60-76, 60-86, 70-66, 70-76, 72-86DT/LP/DTF, 80-66DTF, 80-76DTF, 82-86DT/LP/DTF
65-46, 65-56 and 70-56
65-88 and 65-93
65-94, 82-94 and 88-94
70-88, 72-93, 80-88 and 82-93
B 13
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NBMax front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
X 5,520 6,020 6,320 6,820 SX OC
X 6,920 7,720 SX OC
X 5,520 SX OC
5,720 6,220 6,520 7,020 DMX OC
C 320/70 R24 5,220 6,020 DM OC
C 320/70 R24 5,220 5,520 6,020 6,320 DM OC
B 440/65 R24 6,020 6,920 6,820 7,720 DM LS
A 320/85 R24 5,220 5,520 6,020 6,320 DM LS
5,520 6,320 DM LS
B 440/65 R24 6,020 6,920 6,820 7,720 DM LS
380/85 R24 5,520 6,020 6,320 DM LS
B 440/65 R24 6,020 6,920 6,820 7,720 DM LS
14,9 x 24 6,920 7,720 DM LS
14,9 x 24 6,920 7,720 DM LS
A, B 540/65 R24 6,920 7,720 DM LS HK
A, B, F 540/65 R24 6,920 7,720 DM LS HK
B, ED, F 16.9 R24 6,920 7,720 DM LS HK
G 480/65 R28 6,920 7,720 DM LS HK
G 6,920 7,720 DM LS
A Power beyond plate maybe required G State if tractor has original front hitchB Additional drawbar bracket kit 10386279 maybe required (extra cost) X US subframe - NOT DM Lock & GoC Will mount to 24/12 transmission.D Non Premium tractors must be equipped with power beyond plate (order John Deere plate AL171838) E If transfering hyd set from 6020 to 6030, an inline check valve is required + other adapters (extra cost)F ErgoDrive will not fit if tractor has a Command Armrest. Use ElectroDrive For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
6090RC, 6100RC, 6110RC
5620, 5720, 5820
5070M, 5080M, 5090M, 5100M
6300, 6310, 6400, 6410
6320, 6415, 6420,
6130, 6230, 6330, 6430
6090MC, 6100MC, 6110MC
John Deere2650, 2850
3350, 3650
5080R, 5090R, 5100R
5215, 5315
3200, 3210, 3300, 3310, 3400, 3410
5055E, 5065E, 5075E
5075M, 5085M, 5100M, 5115M (US built)
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd service Euro tool carrier, 3rd service
Non-Parallel Parallel
6120, 6215, 6220
Type
5080G, 5090G
6010, 6100, 6110, 6200, 6210,
5500 - 5510
5415, 5515
B 14
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NB Max front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
A 9.5 x 20 5220 6020 DM OC
A,B 12.4 x R24 5,020 5,820 DM HK
A,B 12.4 x R24 5,020 5,820 DM HK
A,B 12.4 x R24 5020 5,820 DM HK
A,B 12.4 x R24 5020 5,820 DM HK
A Designed to fit to tractors with factory fitted cabB Tractor comes complete with factory fitted joystick and valve. (Hose set supplied only)
For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
DK1002, DX100PC
KiotiDK55 and DK551C
DK751, DK801, DK901, DK902, DK904
DX7510, DX7510PC,
DX9010, DX9010PC
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd service
Type Non-Parallel Parallel
Euro tool carrier, 3rd service
B 15
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NBMax front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
360/70 R20 5,220 6,020 DM OC
B 12.4 X 24 5,520 6,320 DM OC
B 12.4 X 24 5,520 6,320 DM OC
C 320/85 R20 5,220 6,020 DM OC
C 320/85 R20 5,220 6,020 DM OC
C 440/65 R24 5,520 6,320 DM OC
C, D 12.4 X 24 5,520 6,320 DM OC
A 13.6 X 24 6,020 6,820 DM OC
13.6 X 24 5,520 6,820 DM OC
A 13.6 X 24 6,020 6,820 DM OC
A 13.6 X 24 6,920 7,720 DM OC
A 420/70 R24 6,920 7,720 DM OC
A 420/70 R24 6,920 7,720 DM OC
340/85 R24 6,020 6,820 DM OC
420/70 R24 6,920 7,720 DM OC
A Pressure reducing kit 10377217 may be requiredB Subframe available for 2wd tractorsC Subframe will not fit with underslung exhaust.D Hydraulic kit designed for tractors without trailer brake valve
For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
ME 5700
M 5040, 6040, 7040
Type Non-Parallel Parallel
M 6060, M 7060
Kubota
M 8560, M 9960
ME 8200
ME 9000
M 8540, M 9540
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd service Euro tool carrier, 3rd service
M 135GX
M 95S, M 105S
M 110GX
M 95S, M 105S
M 125X
M 128X
M 130X
M 108S
B 16
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NBMax front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
X 5,520 6,020 6,920 6,320 6,820 SX OC
X 6,020 6,920 6,820 7,720 SX OC
X 5,520 6,320 SX OC
X 5,520 6,320 SX OC
A 320/85 R20 5,220 5,520 6,020 DM OC
A 320/85 R20 5,220 5,520 6,020 DM OC
14.9 R24 6,220 7,120 7,020 7,920 DMX OC
B 5,220 6,020 DM OC
B 12.4 R24 5,520 6,020 6,320 6,820 DM OC
B 12.4 R24 5,520 6,020 6,320 6,820 DM OC
480/65 R24 6,220 7,120 7,020 7,920 DMX OC
300/70 R20 5,220 6,020 DM OC
C 300/70 R20 5,220 5,520 6,020 DM OC
300/70 R20 5,220 5,520 6,020 DM OC
5,720 6,220 7,120 6,520 7,020 7,920 DMX OC
6,220 7,120 7,020 7,920 DMX OC
D 9.5 x 20 5220 6020 DM OC
D, E 12.4 x R24 5,020 5,820 DM HK
405/70 R20 4720 5,020 5520 5,820 DM HK
D, E 340/85 R24 6,020 6,820 DM OC
5,520 6,020 6,320 6,820 DM OC
480/65 R24 6,020 6,920 6,820 7,720 DM OCA Will fit with or without front linkage X US subframe - NOT DM Lock & GoB DMX subframe priced as DMC Loader is offset to the rightD Designed to fit to tractors with factory fitted cabE Tractor comes complete with factory fitted joystick and valve. (Hose set supplied only)
For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
Type Non-Parallel
Powermondial 100
Technofarm 75, 85 Tier 2
Powerfarm 75, 85, 95, 105,
Technofarm 60, 70, 80
Powerfarm 60
1.55
Vision 80, 85
6-120C, 6-130C and 6-140C
Alpine 65, 75, 85 Std Tier 2
Vision 90, 100, 95, 105
4-90, 4-100, 4-105
1.70, 1.90
5-080H, 5-090 H, 5-100H, 5-110H
4-060, 4-070, 4-075 and 4-080
Prices - £ Sterling
Hyd
raul
ic
Opt
ion
Globus 65, 75, 80
Blizzard 85, 95T
Mythos 90, 100, 105
Landini
Sub
fram
e
Ghibli 80, 90, 100
Euro tool carrier, 3rd serviceEuro tool carrier, 3rd service
Globus 55, 60, 70
Parallel
Alpine 70, 80, 85 Std GT Tier 3
Powerfarm 80, 90, 100, 110
Technofarm 80 Tier 3
B 17
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NBMax front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
X 5,520 6,020 6,320 SX OC
X 5,520 6,320 SX OC
X 6,920 7,720 SX OC
14.9 R24 5,720 6,220 6,520 7,020 DMX OC
14.9 R24 5,720 6,220 6,520 7,020 DMX OC
B 320/85 R20 5,220 5,520 6,020 6,320 DM OC
280/70 R20 5,220 6,020 DM OC
E 5,220 6,020 DM OC
E 12.4 R24 5,220 6,020 DM OC
F 320/70 R20 5,220 6,020 DM OC
420/70 R24 6,220 7,120 7,020 7,920 DMX OC
420/70 R24 6,220 7,120 7,020 7,920 DMX OC
B 480/65 R28 6,020 6,820 DM OC
11.2-R24 4,720 5,020 5,520 5,820 DM HK
A, C 14,9 x 28 6,220 7,120 7,020 7,920 DMX OC LS
A, C 14,9 x 28 6,220 7,120 7,020 7,920 DMX OC LS
5,720 6,220 6,520 7,020 DMX OC
5,720 6,220 7,120 6,520 7,020 7,920 DMX OC
6,220 7,120 7,020 7,920 DMX OC
D, J 5,720 6,220 7,120 6,520 7,020 7,920 DMX OC EY
D, J 6,220 7,120 7,020 7,920 DMX OC EY
D, J 6,220 7,120 7,020 7,920 DMX OC EY
540/65 R28 6,220 7,120 7,020 7,920 DMX OC
G, H, J, 14,9 x 28 6,220 7,120 7,020 7,920 DMX OC LS
H, J, K 14,9 x 28 7,120 7,920 DMX OC LSA Lift arms on front hitch must be removed when using loader G Lift arms on front hitch must be removed when using loaderB DMX subframe priced as DM H Check tractor hydraulic system - LS or OCC Check transmission type J Check transmission type - Dyna 6 trans'D Check cab - Essential, Efficient for hyd typeE Subframe will not fit with underslung exhaust X US subframe - NOT DM Lock & GoF Subframe adapted for tractors produced after 2008 (T35019) For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
5611, 5612 Efficient and Essential cab
3050, 3065, 6110 - 6140 Steepnose
4435, 4445, 4455
5608, 5609
5425, 5425, 5435 + Steepnose
5445, 5455, 5460 + Steepnose
5410
5440, 5450
3615 Utility, 3625, 3635, 3645 Utility/A-series
3630 A, 3640 A and 3650 A
3625, 3635, 3640, 3645, 3650, 3655 and 3660 F/S
5420, 5430
2430, 2435, 2440
410, 420, 430
6235, 6245, 6255, 6255, 6265 + Steepnose
6445, 6455 + Steepnose
4608, 4609, 4610
ParallelMassey Ferguson
4325, 4335, 4345, 4355, 4365
375, 390, 398
Type
4225, 4235, 4245, 4255
3070
6460, 6470 T2
5610
3080, 3085, 3090, 3115, 3120, 3125, 6150
3050, 3065, 6110 - 6140
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd serviceEuro tool carrier, 3rd service
Non-Parallel
B 18
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NB Max front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
12.4 R24 5,220 6,020 DM OC
D 12.4 R24 5,520 6,020 6,320 6,820 DM OC
D 5,520 6,020 6,320 6,820 DM OC
D, H 6,020 6,920 6,320 6,820 7,720 DM OC
D, H 6,020 6,920 6,320 6,820 7,720 DM OC
A, BC, E 6,020 6,920 6,820 7,720 DM LS
BC, E 14.9 R28 6,020 6,920 6,820 7,720 DM LS
380/70 R24 5,520 6,020 6,320 6,820 DM OC
405/70 R20 4720 5,020 5520 5,820 DM HK
340/85 R24 6,020 6,820 DM OC
340/85 R24 5,520 6,020 6,320 6,820 DM OC
480/65 R24 6,020 6,920 6,820 7,720 DM OC
J 9.5 x 20 5220 6020 DM OC
J, K 12.4 x R24 5,020 5,820 DM HK
D 380/70 R24 5,520 6,020 6,320 6,820 DM OC
D 380/70 R24 5,520 6,020 6,320 6,820 DM OC
J 480/65 R24 6,020 6,920 6,820 7,720 DM OC
A Check tractor spools - Case or Bosch E Check if tractor is Tier 3B Tractor must be equipped with power beyond plate F Check S/No of XTX 215C Will not fit tractors with wide weight carrier G Subframe will fit with front axle suspension (Tier 3 models).,D DMX subframe priced as DM H Counter weight must be used with X56J Designed to fit to tractors with factory fitted cabK Tractor comes complete with factory fitted joystick and valve. (Hose set supplied only) For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
X6.420, X6.430
Type Non-Parallel Parallel
C-Max 60
X4-20, X4-30, X4-35, X4-40
X5.20, X5.30, X5.40 and X5.50
X10.55
Euro tool carrier, 3rd service
X10.75, X10.95
T-Max 80, 90, 100,110, 115
X60.20, X60.30, X60.40, X60.50
X50.20, X50.30, X50.40. X50.50
X50.20M, X50.30M, X50.40M
McCormick
CX90, CX 100, CX110 T3
CX70, CX75, CX80, CX85
CX90, CX95, CX100, CX105
MC105, MC110 Tier 3
C-Max 75, 80, 85, 90, 95, 100, 105, 110
MC80, MC90, MC95, MC100, MC105
X4.20, X4.30, X4.40, X4.50, X4.60, X4.70
Sub
fram
e
Prices - £ Sterling
Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd service
Multicoupler MC4 £295
SoftDrive £200
Make life easier;add these options to your loader
Selecto Fix Implement Part £60
Selecto Fix Lower £250
Upgrade loader package to EasyDrive add £500
Check out our full range of implements later in this price list
Quicke Versa-XSeries
B 19
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NB Max front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
E 6,020 6,920 6,820 7,720 DM OC
A, G 11.2 x 24 5,220 5,520 6,020 6,320 DM OC
A 11.2 x 24 DM OC
A 540/65 x R24 5,520 6,020 6,320 6,820 DM OC
C 480/65 R28 6,020 6,920 6,820 7,720 DM LS OCD, M, J,
L 280/85 R24 5,220 5,520 6,020 6,320 DM OCD, J, K,
L 14,9 x 24 5,520 6,320 DM OC
A 480/65 R24 5,520 6,020 6,320 6,820 DM LS
480/65 R28 6,020 6,920 6,820 7,720 DM LS OC
A 11,2 x 24 5,220 5,520 6,020 6,320 DM OC
A, F 13,6 x 24 5,520 6,020 6,320 6,820 DM OC
A 14,9 x 24 6,020 6,920 6,820 7,720 DM OC
280/70 R16 5,220 6,020 DM OC
A 540/65 x R24 5,220 5,520 6,020 6,320 DM OC
A 540/65 x R24 6,020 6,920 6,820 7,720 DM OC
A 11.2 R24 5,220 5,520 6,020 6,320 DM OC
A 480/65 R24 5,520 6,020 6,320 6,820 DM OC
A 540/65 R24 5,520 6,020 6,320 6,820 DM OC
A 320/70 R24 5,220 6,020 DM OC
A 320/70 R24 5,220 5,520 6,020 DM OC
A, B, H 320/70 R24 5,220 5,520 6,020 DM OC
380/70R20 5,220 5,520 6,020 DS OC
420/70 R24 6,220 7,120 6,520 7,920 DMX LS
C 480/65 R28 6,020 6,920 6,820 7,720 DM LS OCA DMX subframe priced as DM G On F models, subframe will not fit with mudguardsB Will fit with Zuidberg front hitch on 85DA and 95DA H X21/X26 will not fit with front linkageC Additional kit 10377122 may be required for axle suspension (£56.00) J State if front axle support is cast or welded.D Subframe will fit with Folger front linkage K Subframe designed for tier 3 tractorsE Use 1000kg counterweight with X51/X56 L Serial Number of tractor requiredF Use 1000kg counterweight with X51/X56 For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
Type Non-Parallel Parallel Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd service Euro tool carrier, 3rd service
5640, 6640, 6840, 7740
New Holland
TN 85A, 85DA, 95A and 95DA
TN 65F, 75F, 90F, TN 75FA, 85FA, 95FA
TL 70, TL 80, TL 90, TL 100 and TLA
TS 90, TS 100, TS 110
TS 100A, TS 110A
TD5.85, TD5.95, TD5.105, TD5.115 and Tier 4
T4020, T4030, T4040, T4050 Super steer
T4020, T4030, T4040, T4050 and F models
T5030, T5040, T5050, T5060, T5070
T6010, T6020 Plus/Delta, T6040 Elite
TD5.65, TD5.75
T5.95, T5.105, T5.115 and Electro Command
T4.75, T4.85, T4.95, T4.105, T4.115
T4.55, T4.65, T4.75
TD4020F, TD4030F, TD4040F
T6.120, T6.140, T6.150, T6.160
TD 55D, TD60D, TD65D, TD70D
TN 55D, 60DA, 65D, 70DA, 75D and 75DA
TD5040
TN 55, 60A, 65, 70A, 75 and 75A
TD 95D, TD5050
TD 75D, TD 80D, TD 85D, TD 90D
TD5010, TD5020, TD5030
B 20
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NB Max front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
5,220 5,520 6,020 6,320 DM OC
E, F 5,220 5,520 6,020 6,320 DM OC
G, J 5,220 5,520 6,020 6,320 DM OC
J 5,220 5,520 6,020 6,320 DM OC
420/85 R24 6,020 6,820 DM OC
380/85 R24 6,020 6,820 DM OC
B 380/85 R24 6,020 6,820 DM OC
420/70 R24 6,020 6,820 DM OC
560/85 R28 6,020 6,820 DM OC
D 6,020 6,920 6,820 7,720 DM LS OC
A, D 6,520 7,420 7,320 8,220 DM EY HK
420/85 R24 6,920 7,720 DM OC
420/85 R24 6,220 7,120 7,020 7,920 DMX OC
420/85 R24 6,220 7,020 DMX OC
420/85 R24 6,220 7,020 DMX OC
C, G 6,020 6,920 6,820 7,720 DM LS OC
C, G 6,020 6,920 6,820 7,720 DM LS OC
A ElectroDrive or Deluxe hose kit only on Continuo/Hiline L/S verion G Order accumulator kit 5034083 with EasyElectroDrive (£150)B DMX subframe priced as DM H Order Additional kit 5034301 for tractors with a front linkageC Order accumulator kit 5034083 with EasyElectroDrive (extra cost) J Subframe not adapted for under slung (horizontal) exhaust pipe.D Special plug required if tractor has no front suspension (SDF - 04454514.4)E Front weight carrier must be removed in combination with X21 and X26F X21 and X26 will not fit in combination with front hitch For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
Explorer 90.4, 105.4, 115.4 Tier 4
Virtus J 90, 100, 110, 120
Explorer 3 90, 105
Iron 100, 110, 120, 125 (4 cyl) Continuo/Hiline
Prices - £ Sterling
Euro tool carrier, 3rd serviceEuro tool carrier, 3rd service Hyd
raul
ic
Opt
ion
Sub
fram
e
Parallel
Dorado 90.4, 90.4 Classic and 100.4 T4i
Dorrado 80, 90 Classic T4i
Virtus 100, 110, 120, 130 Basic, Infinity
Same
Dorado 3 90, 100 and Classic
Dorado 3 60, 80 and Classic
Explorer 85, 95
Explorer 3 85, 100, 110
Iron 100, 110, 120, 125 (4 cyl)
Explorer 70 II, 75, 80 II, 90 II, 95 and Classic
Type Non-Parallel
Silver 3 100, 110
Silver 3 100, 110 Continuo
Silver 80, 85, 95, 110-4 cyl
Silver 100.4, 105
B 21
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NB Max front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
A, B 13.6-24-8PR 5,020 5,520 5,820 6,320 DM HK
A, B 13.6-24-8PR 5,020 5,520 5,820 6,320 DM HK
A Designed to fit to tractors with factory fitted cabB Tractor comes complete with factory fitted joystick and valve. (Hose set supplied only)
For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd service Euro tool carrier, 3rd service
Parallel
T903
TYMType Non-Parallel
T1003
B 22
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NBMax front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
480/65 R24 6,020 6,820 DM OC
A, D 480/65 R28 6,220 7,120 7,020 7,920 DMX OC
A, C 480/65 R28 7,120 7,920 DMX OC
A, D 480/65 R28 6,220 7,120 7,020 7,920 DMX OC
A, C 480/65 R28 7,120 7,920 DMX OC
E 480/65 R24 6,020 6,820 DM OC
C, E 480/65 R24 6,020 6,820 DM OC
300/70R20 DM OC
C, E 480/65 R24 6,020 6,820 DM OC
F 16.9 x 28 6,920 7,720 DM OC HK
E 14.9 x 24 6,020 6,820 DM OC
B 16.9 x 28 6,920 7,720 DM LS
540/65 R28 6,020 6,820 DM OC
G 540/65 R28 6,920 7,720 DM LS
A Kit 10347271 required for old axle before S/N K36108 - Additional cost. G Hydraulic sets do NOT fit tractors with mid mounted tractor valve.B Subframe will fit with or w/o original front hitchC Subframe will fit with original Zuidberg front hitchD Subframe will fit all options except Zuidberg front hitchE DMX subframe priced as DMF Hose kits available for Advance models For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
N 82, N 92
N 93, HiTech (H3), N 103 HiTech (H3/H5)
Type
N 91, N101, N111, N121 e and Advance
600 - 900
Valtra
6250, 6350, 6550, 6650, 6750, 6850
6250, 6350, 6550, 6650, 6750, 6850
A 72 - A 92
A 65 - A95
A 53, A 63, A73
N 104, 114e and 124 HiTech
6200, 6300, 6400
6200, 6300, 6400
Prices - £ Sterling
Sub
fram
e
Euro tool carrier, 3rd service Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd service
Non-Parallel Parallel
Contact Alo UK LtdContact Alo UK Ltd
A 83, A 93
N 122 Direct/Versu
B 23
Model X21 X31 X41 X51 X26 X36 X46 X56Std Equip' →
Tractor model NBMax front wheel ↓ 2,550 2,850 3,350 4,250 3,350 3,650 4,150 5,050 Std Opt
X 5,520 6,020 6,320 SX OC
X 6,020 6,920 6,820 7,720 SX OC
X 5,520 6,320 SX OC
X 5,520 6,320 SX OC
X 5,520 6,320 SX OC
X 6,020 6,920 6,820 7,720 SX OC
11.2 - 24 5,220 6,020 DM OC
A, C, E 340/85 R24 5,220 5,520 6,020 6,320 DM OC
A, C 340/85 R24 5,220 5,520 6,020 6,320 DM OC
5,220 5,520 6,020 6,320 DM OC
A, E 340/85 R24 5,520 6,020 6,320 6,820 DM OC
A 340/85 R24 5,520 6,020 6,320 6,820 DM OC
A 340/85 R24 5,520 6,020 6,320 6,820 DM OC
G 340/85 R24 6,020 6,820 DM OC
A, B, D 380/85 R24 5,520 6,020 6,320 6,820 DM OC
A, B, D 380/85 R24 6,020 6,920 6,820 7,720 DM OC
A, BD, F 380/85 R24 6,920 6,820 7,720 DM OC
A, D 380/85 R24 5,520 6,020 6,320 6,820 DM OC
A, D 380/85 R24 6,020 6,920 6,820 7,720 DM OC
A, D 380/85 R24 5,520 6,020 6,320 6,820 DM OC
A, D 380/85 R24 6,920 6,820 7,720 DM OC
J 420/70R24 6,920 6,820 7,720 DM OC
A DMX subframe priced as DM E Check date tractor was manufacturedB Check if tractor has metal or plastic bonnet F 4 Cylinder onlyC NOT X21/X26 if fitted with front linkage G Adapted for tractors with 175L or 190L fuel tankD Subframe will not fit with front linkage J Subframe will not mount to tractors with side mounted drive shaft
For more information regarding tractor loader combinations, please contact your Alo UK Area Manager, or Alo UK Sales Office.
Forterra HSX 100, 110, 120, 130 and 140
Proxima 70, 80, 90, 100
Prices - £ Sterling
Sub
fram
e
Hyd
raul
ic
Opt
ion
Euro tool carrier, 3rd service
Non-Parallel Parallel
ZetorEuro tool carrier, 3rd service
Type
Proxima 6441, 7441, 8441, 9441
Proxima 65, 75, 85, 95
Proxima Plus 85, 95, 105
4320, 4340, 5320, 5340, 6340, 7340
9145, 9245
7540, 8540, 9540
4341, 5341, 6341, 7341
6045, 6245, 7045, 7245, 7745
6011, 6211, 7011, 7211, 7711
Major 80
Proxima Plus 90, 100, 110
Proxima Power 85, 90, 95, 100, 105, 110, 115, 120
Forterra 8641, 9641
Forterra 120, 130, 140
Proxima Plus 8541, 9541, 10541
Forterra 10441, 11441
Forterra 12441
Forterra 115, 125
Forterra 95, 105
Forterra 100, 110
Check out our full range later in this price list
4 in 1 Multipurpose Flexigrip
H Series Bucket
Unigrip Flexibal
Remember to choose from ourrange of quality implements
Flexigrip
Silograb
BigBagLifter
C1
Model Lift Capacity 3000 4000 4500 5000 5200 6000 L LV H HT
SSkid Steer
X21 870 800 800 • ▲ •X31 970 800 800 • • ▲ •X41 1010 800 800 800
X51 1080 1000 800 800 800 • ▲X26 1220 1000 1000 ▲ • •X36 1520 1200 1200 ▲ ▲X46 1590 1200 1000 1000 • ▲ •X56 1680 1200 1200 1000 1000 ▲ •
▲ • Best Choice
COUNTERWEIGHT AND BUCKET RECOMMENDATION MATRIXCounterweight recommendation.Tractor weight to loader model. Which bucket should I choose?
TRACTOR WEIGHT (kg) BUCKET MODEL Counterweight ReguationsAreas of application
Light excavation and loading work
Loading of grain, wood chips and snow
Loading of lighter materials at high level
Heavy excavation and loading work
A counterweight increases tractor stability, traction and tractor braking force.Contract work in gravel/
sand, earth and stone
Grading work Regulation - EN 12525: No less than 20% of the gross tractor/loader
weight must apply to the rear axle, including the counterweight.
Professional snow clearance
A Good Choice
Work in gravel/sand, earth and stone
12
C 2
• Recommendation
Series MP
MPT4 in 1
Twin Fork Bale Spike Flexibal TopGrip Flexigrip
MODEL 135 160 180 210 200 220 185 210 160 140 130 160 160
X21 • • •X31 • • • • • • • • •X41 • • • • • • • • • • • • • •X51 • • • • • • • • • • • • • •X26 • • • •X36 • • • • • • • • • •X46 • • • • • • • • • • • • • • •X56 • • • • • • • • • • • • • •
• Recommendation
Stone Fork
MODEL 1000 1600 150 130 150 170 130 150 190 130 150 190 125 150 800 1000
X21 • • • •X31 • • • • • • • • • • •X41 • • • • • • • • • • • • • • • •X51 • • • • • • • • • • • • • • • •X26 • • • •X36 • • • • • • • • • • •X46 • • • • • • • • • • • • • • • •X56 • • • • • • • • • • • • • • • •
IMPLEMENT - LOADER RECOMMENDATIONS
BUCKETS BALE HANDLING
IMPLEMENT - LOADER RECOMMENDATIONS.
Unigrip
FORKS AND GRABS
Silograb Multibenne Silocut SG CounterWeight
IMPLEMENT - LOADER RECOMMENDATIONS.
Series H & HT
Series LV
Series S
Skid Steer only
Pallet Forks Manure Forks
Contact Alo UK for implement recommendation for loader C 3
Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price1.35m 0.54 m³ Euro 11251018Q 1.35m 0.54 m³ Euro 11251108Q 1.85m 0.72 m³ Euro 11251068Q
53" 18 cu.ft SMS 11251015Q 53" 18 cu.ft SMS 11251105Q 72" 25 cu.ft SMS 11251065Q
1.60m 0.65 m³ Euro 11251028Q 1.60m 0.65 m³ Euro 11251118Q 2.10m 0.82 m³ Euro 11251078Q
Type 3 11251023Q 63" 23 cu.ft SMS 11251115Q 83" 29 cu.ft SMS 11251075Q
SMS 11251025Q 1.85m 0.72 m³ Euro 11251128Q 2.40m 0.95 m³ Euro 11251088Q
1.85m 0.72 m³ Euro 11251038Q 72" 25 cu.ft SMS 11251125Q 94" 34 cu.ft SMS 11251085Q
Type 3 11251033Q 2.10m 0.82 m³ Euro 11251138Q 2.60m 1.03 m³ Euro 11251098Q
SMS 11251035Q 83" 29 cu.ft SMS 11251135Q 102" 37 cu.ft SMS 11251095Q
2.10m 0.82 m³ Euro 11251048Q
Type 3 11251043Q
SMS 11251045Q
2.40m 0.95 m³ Euro 11251058Q94" 33 cu.ft SMS 11251055Q
Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price2.00m 1.16 m³ Euro 11251148Q 2.10m 1.50 m³ Euro 11251808Q
79" 41 cu.ft SMS 11251145Q 83" 43 cu.ft SMS 11251805Q
2.20m 1.28 m³ Euro 11251158Q 2.40m 1.70 m³ Euro 11251818Q87" 45 cu.ft SMS 11251155Q 94" 60 cu.ft SMS 11251815Q
2.40m 1.70 m³ Euro 11251168Q 2.60m 1.85 m³ Euro 11251828Q94" 60 cu.ft SMS 11251165Q 102" 65 cu.ft SMS 11251825Q
2.60m 1.85 m³ Euro 11251178Q102" 65 cu.ft SMS 11251175Q
240HDV 1,435
240HV 1,335 260HDV 1,735
240H 905 HIGH VOLUME
260HV 1,435
220HV 1,035
HIGH VOLUME HEAVY DUTYSe
ries
HV
Serie
s H
DV
200HV 835 210HDV 1,135
210H 80583" 29 cu.ft Remember to quote a Counter Weight
240HD 1,385
185H 70572" 25 cu.ft 210HT 985 260HD 1,585
160H 655 160HT 785 210HD 1,08563" 23 cu.ft
185HT 885
135H 605 135HT 725 185HD 985
BUCKETSGENERAL PURPOSE GENERAL PURPOSE WITH TEETH HEAVY DUTY
Serie
s H
Serie
s H
T
Serie
s H
D
Contact Alo UK for implement recommendation for loader C 4
Mouth Mouth
Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No Price1.65m 1.65m Euro 11253138Q
65" 65" SMS 11253138Q
1.90m 1.90m Euro 11253148Q75" 75" SMS 11253145Q
2.15m 2.15m 85" 85"
Model Width Capacity Hook Part No Price Model Width Capacity Hook Part No PriceEuro 11252658Q 2,045
Without 11252650Q 1,945Euro 11252668Q 2,245 Part No Price
Without 11252660Q 2,145Euro 11252678Q 2,445 Model Width Capacity Hook Part No Price
Without 11252670Q 2,345Euro 11252688Q 2,645
Without 11252680Q 2,545
965
230 2.30m 91"
1.41 m³200XH 2.00m 79"
1.60 m³
60000540 1,500
Eur
o
11251528Q220 2.20m 87"
3754th service kitBucket mounted
60000485 100
Plastic Cutting Edge kit
Steel Bolt-On Cutting Edge kit
Description
FRONT TIPPING
XH S
erie
s Rubber dampeners used to reduce noise
during operation
Will require 3rd and 4th service fuctions.
price includes hoses
Hoses included with hydraulic implements are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost
240XH 2.40m 94"
2.00 m³
260XH 2.60m 102"
2.20 m³
Also available with Trima hooks at Euro prices.0.83 m³ 11251738Q 1,155
0.65 m³
240 2.40m 94"
Special bucket mounted 4th service valve to activate flap 60003452
220XH 2.20m 87"
1.80 m³
SPECIALIST BUCKET
SPECIAL CLEARING BUCKET
Gra
ding
2.00m 79"
0.93 m³ 615
200PC 0.78 m³ 785
The Precision Bucket is different from other buckets by being narrower in the front. The high volume of the bucket and long base give better loads when travelling between sites, reducing load trips. Material can also be placed with greater accuracy with increased visibility to the cutting edge.PS Maximise bucket filling.PC Where loose material is used.
Euro 11252848Q 3,400
3,420
3,120
210MPT 0.66 m³
185MP 0.56 m³ 3,020 185MPT 0.56 m³
SPECIAL BUCKETSMULTI PURPOSE MULTI PURPOSE WITH TEETH SPECIALIST BUCKET
4 in
1
4 in
1
967m
m
967m
m
Prec
isio
n
Conical (PC) Straight (PS)
200PS
Also available for skidsteer. See skidsteer implements page
Order Selecto Fix for simple hose connection
11252448QEuro
11252168QEuro
11252158QEuro
11252148QEuro
11252468QEuro
11252458QEuro
Also available for skidsteer. See skidsteer implements page
2,820160MP 0.48 m³ 2,720 160MPT 0.48 m³
210MP 0.66 m³ 3,320
Contact Alo UK for implement recommendation for loader. C 5
Mouth Mouth Mouth
Euro hooks welded
Model Width Capacity Tines Hook Part No Price Model Width Capacity Part No Price Model Width Capacity Tines Hook Part No Price1.85m 11254081Q 1.85m
72" 11254089Q 72"
2.10m 72" 11254091Q 2.10m83" 11254094Q 83"
2.40m 11254095Q 2.40m94" 83" 11254096Q 94"
2.60m 11254103Q 2.60m102" 11254104Q 102"
94" 11254105Q
11254120Q
Hook Part No Price 11254114Q102" 11254118Q
Mouth
Part No Price60002029 150
Part No Price
Model Width Capacity Tines Hook Part No Price1.30m 0.69 m³
51" 24 cu.ft
1.50m 0.79 m³59" 27 cu.ft
1.70m 0.90 m³67" 32 cu.ft
1.90m 1.01 m³Model Width Colour Part No Price 75" 35 cu.ft
185BOH 1.85m 11254153Q 175 2.10m 1.11 m³210BOH 2.10m 11254154Q 200 83" 39 cu.ft
240BOH 2.40m 11254155Q 225 2.30m 1.22 m³260BOH 2.60m 11254156Q 250 91" 43 cu.ft
BUCKET GRABSHEAVY DUTY BUCKET GRAB
Pow
ergr
abB
OH
1500
mm
Bolt
On
Hoo
kR
ail T
ype
CNH LM
Bobcat FDI
Claas Scorpion
JCB Qfit
Manitou MTL
Merlo ZM2
Matbro (Pin and Cone)
Volvo
Hauer
SkidSteer
Schäffer
SMS
Hook Type
Powergrab BOH c/w hooks
1500
mm
Price includes loader fittings and hoses
185BOH
275
260BOH 1.40 m³ 9 3,400
MULTIPURPOSE GRAB
Mul
tiben
ne
1248
mm
185 SE* 1.01 m³ 6
Eur
o
11250728Q 2,700
* Powergrab 185SE up to Q56 loader only
KramerWeidemann
11254111Q
11254112Q 225
11254123Q
Side plate extension set Multipurpose grab
11260872 150price includes hoses
Weidemann
HEAVY DUTY BUCKET GRAB
Pow
ergr
ab SE
Price includes loader fittings and hoses
210BOH 1.15 m³ 7
240BOH 1.30 m³ 8
210 SE 1.15 m³ 7 11250738Q 2,90011254100Q
11254080Q
Hook
HEAVY DUTY BUCKET GRAB
Pow
ergr
abB
OH
1.01 m³
Hoses included with hydraulic implements with hooks and are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost
Hook Types for Powergrab BOH (only)
260 SE 1.40 m³ 9 11250758Q 3,400
240 SE 1.30 m³ 8 11250748Q 3,250
11254110Q
11254102QRai
l Typ
eW
ithou
t hoo
ks2,700
2,900
3,250
1.01 m³ 6Kramer
Weidemann
KramerWeidemann
10 11250848Q 2,075
210 11 11250858Q 2,275
8 11250828Q 1,675
170 9 11250838Q 1,875
7
1500
mm
Kramer
12 11250868Q 2,475
Eur
o
11250818Q 1,475
150
N.B. For high flow/pressure Telehandler, We recommend a pressure relief valve.
Type
BOLT ON CUTTING EDGE option
The NEW Powergrab BOH Adapted to mount to material handlers to suit Bolt On Hooks (BOH). Prepared for a Bolt on Cutting Edge (BCE).Pressure relief valve may be required.
3 section cutting edgeY
ello
w
Och
ra
3,650
3,500
3,150
2,950
1.40 m³
1.30 m³
1.15 m³
190
11254099Q 195
11254113Q 250
11254147Q 295
11254366Q 305
230
11254367Q 290
130
250
11254125Q 290
Pressure Relief Valve for PG BOH
11254368Q 255
11254124Q 250
11254122Q 275
Pow
ergr
abB
OH
Euro
Euro
Euro
Euro
2.10m
2.60m
2.40m
1.85m
260BOH
240BOH
210BOH
185BOH
Contact Alo UK for implement recommendation for loader. C 6
Mouth Mouth
Model Width Hook Part No Price Model Width Capacity Tines Hook Part No Price Model Width Capacity Tines Hook Part No PriceEuro 11251838Q Euro 11250888Q Euro 11254226Q 2,595
Type 3 11251833Q Type 3 11250883Q SMS 11254226Q 2,59551" SMS 11251835Q 51" SMS 11250885Q w/o 11254227Q 2,495
Euro 11251848Q Euro 11250898Q Euro 11254229Q 2,995Type 3 11251843Q Type 3 11250893Q SMS 11254230Q 2,996
59" SMS 11251845Q 59" SMS 11250895Q w/o 11254228Q 2,8951.70m Euro 11251858Q 1.70m Euro 11250908Q Euro 11254232Q 3,395
67" SMS 11251855Q 67" SMS 11250905Q SMS 11254233Q 3,3961.90m Euro 11251868Q 1.90m Euro 11250918Q w/o 11254231Q 3,295
75" SMS 11251865Q 75" SMS 11250915Q 2.00m2.30m Euro 11251878Q 2.10m 78"
91" SMS 11251875Q 83" 2.25m2.30m 88"
91"
2.50m98" Part No Price
60002029 150
Model Width Tines Length Hook Part No Price
1.10 m³1.75m68"175 SG
770m
m
3,600
260 2.60m
102"
5 grab27cm
11250535 3,700
240T 5 grab8 lower
11250538 3,900
ROUND BALE - BRASH
Without teeth With teethc/w Hoses. Order with FOC protective backscreen.
210 2.10m
83"
4 grab24cm
Eur
o
11250533 3,200
210T 4 grab6 lower
11250536 3,400
240 2.40m
94"
4 grab24cm
11250534 3,400
240T 4 grab7 lower
11250537
Hoses included with hydraulic implements with hooks and are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost
1.25 m³ 16
225 SG 1.40 m³
200 SG 3,99511254234Qw/o
Max
i G
rapp
leFORKS AND GRABS
2nd year warranty does not include any wearing parts.2,575
SHEAR GRAB
11 11250928Q 2,375230 12 tines 1,035
Eur
o
250 1.33 m³
210
Remember to quote a Counter Weight
230 1.22 m³ 12 11250938Q
13 11250948Q 2,775
Max hyd pressure2 cylinders - 210 bar3 cylinders - 250 bar
18
Silocut SGII
Order pressure reduction valve if pressure exceeds above
NEW Silocut SGIIWelded sleeves for the tinesConus 3 outer tinesDacromet® corrosion protection on Bolt-on knifesNew 80mm x 80mm Backframe hook interface to accept various bolt-on hook40mm cylinder pins Improved greasing points for the main pivot pinsMore efficient cutting with the side tines closer to the side knifeStong corner braces to protect knives.
Pressure Relief ValveN.B. For high flow/pressure Telehandler, We recommend a pressure relief valve.
9 tines 805 170 0.90 m³ 9 1,975
190 10 tines 905 190 1.01 m³ 10 2,175
MANURE FORK SILAGE GRAB
150 1.50m8 tines 725 150 1.50m
0.69 m³ 7 1,575
0.79 m³
1.11 m³
170
8 1,775
Man
ure
Fork
s
Silo
grab
1172
mm
130 1.30m7 tines 655 130 1.30m
price includes hoses
Tines
Silo
cut S
GII
11254237Q 4,395
Euro version includes hoses (also available with Trima hooks)
100.80 m³125 SG
120.95 m³150 SG 1.50m59"
1.25m47"
14
Contact Alo UK for implement recommendation for loader. C 7
Roller
89mm
129mmTines Roller Bale Size Price Model Price Model Hook Price
2
Fixing PriceClamp 150
Part No Price
Tines Hook Price Model Hook Price Model Pricewithout 335
5, MX
Hoses included with hydraulic implements with hooks and are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost
200 60 - 200cm max
11250390without hooks and hoses 1,980
Euro, No 3, No 5 or MX hooks/hoses (state hook type) 2,130
1 x long2 x short 115cm
11254072Q
435
11253350Q without
TG540mm
to 1030mm closed 11253358Q
1,225
1,37511254072Q + hooks
11254051QEuro
Width Part No Width Part No and Spec
Euro
120 - 160cm max
without 11250780Q
200 150 - 200cmmax
11250400Qwithout hooks and hoses 1,925
For alternative hook types see back of price list
11260637
Dimensions Part No
Qua
drog
rip
SQUARE BALE
1,125
Optional pressure relief valve 60010270 for telehandler maybe required
120Euro version with welded hooks, Type 3 with bolt on hooks
Sing
le S
pike
M
KII
Euro version with welded hooks
Backstop
16060010270
Euro, No 3, No 5 or MX hooks/hoses (state hook type) 2,075
ROUND BALE ROUND AND SQUARE BALE
Topg
ripPressure Relief Valve
For Flexibal, Flexigrip and Unigrip
Part No 1,275
Optional pressure relief valve 60010270 for telehandler maybe required
Euro, No 3, No 5 or MX hooks/hoses (state hook type)
Now with 2 x anti-rotation tines
N.B. For high flow/pressure Telehandler, we recommend a pressure relief valve. Reduces to 180bar
BALE HANDLINGROUND BALE
Flex
ibal
with
inte
gral
tine
s
Flex
igrip
for v
ertic
al s
tack
ing
Uni
igrip
Euro price includes hooks and hoses
Part No and Spec Bale Size Part No and Spec Bale Size Part No
160 120 - 160cmmax
11250700Qwithout hooks and hoses 1,225
130 90 - 130cm max
1,025
Optional pressure relief valve 60010270 for telehandler maybe required
without 11250770Q
Euro, No 3, No 5 or MX hooks/hoses (state hook type) 1,375 1,175
Optional pressure relief valve 60010270 for telehandler maybe required
Euro, No 3, No 5 or MX hooks/hoses (state hook type)
184cmmax
Ø89mm
2 Ø129mm
180cmmax
11250760Qwithout hooks and hoses 1,025
Euro, No 3, No 5 or MX hooks/hoses (state hook type) 1,175
11253961Qwithout hooks and hoses 1,025
Euro, No 3, No 5 or MX hooks/hoses (state hook type) 1,175
Contact Alo UK for implement recommendation for loader. C 8
Part No Price
Model Width Hook Part No Price Hook Part No Price140(82) 11251577 445140(125) 11251578 495
Part No Price Part No Price
Part No Price
Model Tines Hook Part No PriceEuro 11251368
Type 3 11251363SMS 11251365Euro 11251378
Type 3 11251373SMS 11251375
Part No Price
Part No Price11260349 9511260348 95
Hoses included with hydraulic implements with hooks and are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost
WidthOpen 1280mm Closed 350mm
(Outside to outside of tines)11252050Q 895
Does not include backframe or tines
Extension frame
Hinged Square Bale Fork Options
Designed to ease manoeuvering and spreading of the pallet fork tines without
leaving the tractor.Ideal to clamp plallets/crate when loading or
stacking
DescriptionBig Bag Lifter adapter
5 1,095
140 140cm 2 775
190 190cm
11252335QSMS
Also available for skidsteer. See skidsteer implements page
2500kg 1,015Includes 2 x hydraulic cylinders
price includes hooks
Width
SQUARE BALE FORKS, PALLET FORKSPALLET FORK (ISO)
Hinged safety frame
Fixed frame
Pallet Fork Accessories (ISO type)
price includes welded hooks
Tine Length
11252211Q 795
Description
Euro
SQUARE BALE
95
Hin
ged
Squa
re
Bal
e Fo
rk
Type 3 11252333Q
11252338QEuro
11252348QEuro
11252345Q
SQUARE BALE
Big Bale Fork Options
Bale Spike AdapterISO type frame
Info
Pallet Fork Accessories (ISO type)
1 short1 Long
295
Requires 3rd service
Pallet Fork Accessories
Tines1 short1 Long
Bale Spike AdapterOld Alo type frame
Will not mount to ISO type backframe
295
925
Will not mount to old Alo type backframe
Big
Bal
e Fo
rk
2 x 125cm2 x 82cm
140cm
PALL
ET F
OR
K
LOA
DER
S
Tines LengthModel
11215030
Will not mount to old Alo type backframe
Log Grab AttachentISO type frame
Will not mount to old Alo type backframe
11251754QExtension frame 11215019
Tines
Pallet Fork Hydraulic Spreader Kit
1000kg version - Small loaders only i.e. small Versa-X, Q21/26
970mm
1220mm
1000kg 970mm
1600kg
825
975
1220mm
Euro 11252308Q
11252303QType 3
SMS 11252305Q
11252328Q
11252323Q
11252325QSMS
Type 3
Euro
MX 11252732Q
SMS
MX 11252712Q
MX 11252722Q
MX 11252732Q
Contact Alo UK for implement recommendation for loader. C 9
Model Height Capacity Hook Part No Price Model Height Capacity Part No Price Model Height Capacity Part No Price11254361Q 425 11254363Q 825 11254364Q 1,02511254541Q 11254623Q 11254632Q 1,32511254542Q 11254624Q 11254633Q 1,30511254543Q 11254625Q 1,125 11254634Q 1,29011254641Q 11254627Q 1,105 11254635Q 1,25511254544Q 725 11254628Q 1,090 11254636Q 1,30011254547Q 690 11254629Q 1,055 11254637Q 1,27511254548Q 655 11254630Q 1,10011254549Q 700 11254631Q 1,07511254550Q 675
Model Hook Price
Model H/D/W Hook Part No Price Model Width Hook Part No Price
Part No Price
Hook PriceEuroSMS
10377123
Description1200mm Long hoses - kit for Implements to fit directly onto 3rd service valveConversion for older loader To fit hosesbetween 3rd service and tool carrier Q700/900
Big Bag Lifter. Dual & Triple models, capable of lifting two or three bags at once have the extra capacity of 1500kgs (each hook), along with the ability of extending the arm for higher bags to 51cm in 17mm increments
Dual1500
Loaders
Dual1500
Handlers
975
455
FERTILISER BAG LIFTER
BM large
Hook HookW/O
Claas Scorpion BM large
Lifti
ng A
rm
Merlo
OTHER IMPLEMENTSFERTILISER BAG LIFTER
THREE-POINT LINKAGE
SPECIAL FORK
Rear shown
Ideal for stones and cut logs
1,065
1,265Euro
11251548Q
200 2.00m 18 tines
Remember to quote a Counter Weight
147cm 1000kg
575
Single1000
Loaders
Tines
Blade Length
REAR COUNTERWEIGHT
Cou
nter
wei
ght
Hoses included with hydraulic implements with hooks and are designed to mount to the couplings on the tool carrier. Longer hose kits available additional cost
Single1000
Handlers
HD 170cm Euro
Capacity
Part No
11209793 895
Thre
e-po
int
linka
ge h
itch
H 725 D 780W 810
Small up to 800kg
H 725 D 1030W 810
Large 1000 - 1500kg
11251676 495
55511251661
Lower rear links
Ston
e Fo
rk
Capacities - from 800kg upto a maximum of 1500kg.
Counterweights must be filled by the end user. Model "Large" filled with concrete to position 1 = 1000kg.
Combination of steel and concrete for a weight up to 1500kg
11251435
11251438
Part No
Hose Kit Options
50
130
1214901Attaches to 3 point hitch and Euro
implements attach via pin securing.Ideal for rear and front hitch.
Silo
split
HD
Order counterweight for tractor/loader combinations as per regulation EN12525
Heavy Duty (c/w safety guard)
11251558Q
150 1.50m 15 tines
Lifti
ng A
rm
Lifti
ng A
rm
Matbro Merlo
Manitou JCB Qfit BM large
MXType 3SMSEuroW/O
ROUND BALE
FERTILISER BAG LIFTER
Manitou Merlo
Matbro
Heightadjustable
Heightadjustable
Manitou JCB Qfit
2 x 1500kg
151cmto
204cm
3 x 1500kg
151cmto
204cm
Triple1500
Handlers
Matbro
Claas Scorpion JCB Qfit
SMSEuroW/O
Contact Alo UK for implement recommendation for loader C 10
Model Width Capacity Hook Part No Price Model Width Tines Hook Part No Price Model Hook Part No Price1.85m 0.60 m³
73" 18 cu.ft
2.10m 0.68 m³83" 24 cu.ft
Part No Price
Mouth
Model Width Capacity Hook Part No Price1.65m Tines Hook Part No Price
65"
1.90m 75"
2.15m 85"
1.65m 65"
1.90m 75" Part No Price
2.15m 85"
SKIDSTEER IMPLEMENTS
MULTI PURPOSE (Skidsteer)
185SSkid Steer
11251721Q 710
0.66 m³
Sing
le S
pike
M
KII
Fixed frame
GENERAL PURPOSE (Skidsteer)Se
ries
S
185MP 3,020
210MP 3,320
160MP 2,720
For skidsteer connection only.Special order!
2500kg 1150
PALL
ET F
OR
K
WA
LK-T
HR
U.
950
850
1220mm4 in
1
967m
m
0.48 m³
0.48 m³
210S 11251821Q 815
1100
0.56 m³
1000
0.56 m³
210MPT 3,420
185MPT 3,120
160MPT 2,820
Walk-Thru Pallet Fork.The pallet fork frame is specifically designed to suit Skid Steer machines with a forward entry cab so that you can easily and safely enter the cab over the pallet via a sturdy step. In-between the fork frame supports is a walk way (Walk-Thru)
Width
11252461QSkid
11252451QSkid
11252441QSkid
0.66 m³
Skid
11252151QSkid
11252141QSkid
11252161Q
1060mm
Fixed frame pallet forks for SkidSteer with walk through step
PALLET FORK (Skidsteer)
Ski
d
11253974Q
11253978Q
11253980Q
11253988Q
11253990Q
11253994Q
1050
800kg
1500kg
Tines Length
140(125) 2 x 125cm
11251720Q 495
SQUARE BALE (Skidsteer)
Big
Bal
e Fo
rk
140cm Skid
60001611
Price
Left
140
Skidsteer Weld On HooksSkidsteer weld on
Sold as a pair
60001610Right
Big Bale Fork OptionsDescription
Extension frame 11215019 95
2000kg
1060mm
1220mm
1060mm
1220mmROUND BALE (Skidsteer)
4351 x long2 x short
11254051QSkid115cm
Now with 2 x anti-rotation tines
C 11
Price 100 Price 100 Price 100
Price 100 Price 100 Price 100
Price £95 Price £95 Price £75See Other Options page for older loader options
11220063 11209710 11209711
Euro Weld on Ear Euro Weld on Ear Trima Weld On Ear Weld on Ears
Weld on extension ears extend the eye of Euro and Trima hooks to increase crowd
back angle.Affects older implements with flat upright
back.
830513 11251690 11261363
11209714 11209717 11209718
MX Bolt On Hook Alo No 3 Bolt On Hook Trima No 5 SMS Bolt On Hook
65
SMS
65
Euro Standard Bolt On Hook Euro Extended Eye Euro Extended Hook and Eye
10830440
Euro
65
Type 3
830567 830105
L/H & R/H hooks
L/H & R/H hooks
Tack welded together
WELD ON HOOKS, BOLT ON HOOKS, WELD ON HOOK EARS and DIMENSIONSEuro Weld On Hooks Alo No 3 Weld On Hooks Trima No 5 Weld On Hooks HOOK TYPES and DIMENSIONS
856
420
Alo (Type 3)
690
500
Trima (No 5/SMS)
1080
79
530
Euro (No 8)
C 12
Model Type Box Size Part No Price Model Type Box Size Part No Price Model Type Box Size Part No PriceHook 40 & 80 60003104 Hook 40 & 80 60003283 Hook 40 & 80 60003107
40 x 80 60004375 40 x 80 60004375 40 x 80 6000437580 x 80 60004374 80 x 80 60004374 80 x 80 60004374
Model Type Box Size Part No Price Model Type Box Size Part No PriceHook 40 & 80 60003106 Hook 40 & 80 60003105
Model Type Price40 x 80 60004375 40 x 80 6000437580 x 80 60004374 80 x 80 60004374
HEAVY BOLT ON HOOKSJCB Q-fit Kramer/Claas Scorpion Pin and Cone
Then choose 250Then choosePin and Cone U Bolt
Merlo Manitou Volvo BM
U Bolt U Bolt265Q-fit Then choose 280Kramer
If the hook type you require is not shown above, please call your area manager of the Alo UK sales office.
Will mount to 40mm x 80mm box section frames only
Part Number
U Bolt U Bolt Volvo BM Bolt on 11209713 300275Then choose 230Then chooseMerlo Manitou
C 12
Weights of materials KG/m³ % Fill Weights of materials KG/m³ % Fill `
Aggregate (brick) 1820 100 Flour 440 85 1 cubic cm = 0.06102 cubic inches 1 cu cm = 0.06102 cu inAshes 600 85 Glass 2,600 85 1 cubic metre = 35.31467 cubic feet 1 cu m = 35.31467 cu ftAsphalt 1,600 100 Granite chippings 2,655 85 1 cubic metre = 1.31 cubic yards 1 cu m = 1.30795 cu ydBarley 609 85 Gravel (dry) 1,700 85Beet pulp (nuts) 600 85 Lime (quick loose) 850 100 1 cubic inch = 16.38706 cm 1 cu in = 16.38706 cm³Beet pulp (pressed) 900 110 Limestone (crushed) 1,526 100 1 cubic foot = 0.02832 m³ 1 cu ft = 0.02832 m³Bewers grains 1,110 85 Manure (farmyard) 900 85 1 cubic foot = 28316.846 cm³ 1 cu ft = 28316.846 cm³Brick aggregate 1,830 100 Mortar 1,600 100 1 cubic yard = 0.76455 m³ 1 cu yd = 0.76455 m³Bricks (common) 2,450 per 1,000 x Oats 410 85Brick (facing) 2,700 per 1,000 x Peat (dry) 400 100Cement (natural) 895 100 Potatoes 690 85Cement (portland) 1,440 100 Rubble 1,025 100 1 sq. cm = 0.15500 sq. inches 1 sq. cm = 0.15500 sq. inChalk 2,200 100 Refuse (dry) 398 100 1 sq. metre = 10.763 91sq. feet 1 sq. m = 10.763 91 sq. ftClay (fire) 2,080 100 Sand (dry) 1,550 100 1 sq. metre = 1.195 99 sq. yards 1 sq. m = 1.195 99 sq. ydClay (wet) 1,880 100 Sand (wet) 1,900 110 1 hectare = 2.47105 acres 1 ha = 2.47105 acresCoal (anthrace) 896 100 Sawdust 250 110 1 hectare = 0.00386 sq. miles 1 ha = 0.00386 sq. miCoal (bituminous) 1,261 100 Silage (ensiled) 730 110Coal (canneI) 1,261 100 Silage (green) 340 110 1 sq. inch = 6.4516 sq. cm 1 sq. in = 6.4516 sq. cmCoal (newcastle) 1,261 100 Slate 2,723 100 1 sq. foot = 929.0304 sq. cm 1 sq. ft = 929.0304 sq. cmCoal (welsh) 1,261 100 Slurry 1,740 85 1 sq. foot = 0.09290 sq. metres 1 sq. ft = 0.09290 sq. mCoke (loose) 597 85 Snow (fresh) 141 110 1 sq. yard = 0.83613 sq. metres 1 sq. yd = 0.83613 sq. mCoke (petroleum) 700 85 Snow (wet) 514 110 1 acre = 0.40469 hectares 1 acre = 0.40469 haCopper (concentratre) 2,300 85 Sodium chloride (dry/salt) 1,300 85Earth (dry loose) 1,112 100 Sugar beet 540 100Earth (wet packed) 1,550 100 Turnips 540 100Fertiliser (mixed) 1,000 85 Wheat 730 85Fertiliser (nitrate) 1,250 85*These figures are approximate and are used as a guide to material density
Volume Conversions
Measurment Conversions
HELPFUL INFORMATION
Weights of Materials ChartMetric to Imperial Conversions
Imperial to Metric Conversions
Metric to Imperial Conversions
Imperial to Metric Conversions
Retail Order Fixed Carriage Charge
Single option/accessory Appropriate Carriages Costs
Three or more implements Free of charge
Alo UK Area Managers. Important: The following delivery charges will apply to all orders below £2,000 retail if delivered by Alo UK.
A premium will be incurred for other carriers.
Single implement £40.00
IMPORTANT INFORMATION. (Read carefully)
Prices apply in U.K. only and include carriage to U.K. mainland address unless shown as ex-works or orders placed under £2,000 retail value (excluding
V.A.T.)Prices and specifications are subject to alteration without notice
All goods supplied remain the property of Alo UK until full payment is receivedAny delivery dates quoted are approximate only and orders not executed prior
to further price increase will be charged at prices applicable at the time of the despatch.
A refurbishment charge will apply to any goods returned to Alo UK which are not in a resaleable condition, this includes incorrectly ordered goods or
goods no longer required.Parts missing from returned kits/loaders will also be charged.
Boxed goods stored outside will incur a charge.
CLAIMS: No claim for damage or shortage can be entertained unless the carriers and ourselves are notified in writing within three days of delivery
or in the case of non-delivery, within twenty-one days of date of despatch.
IT IS RECOMMENDED THAT ALL HYDRAULIC SETS AND SUBFRAMES ARE INSTALLED BY EXPERIENCED TECHNICIANS. FAILURE TO DO SO MAY
QUESTION THE VALIDITY OF WARRANTY ON THE PRODUCT.
Placement of your order is your agreement to these conditions.
Alo UK Ltd315 Elm DriveHartlebury Trading EstateHartleburyWorcestershire. DY10 4JB. UKPhone: 01299 250922 Fax: 01299 250944E-mail: [email protected]: www.alo.uk.com, www.quicke.uk.com, www.trima.uk.com www.facebook.com/AloUKLtd
Alastair Thomson07713 [email protected]
Edward Grierson07713 [email protected]
Simon Hewitt07836 364233
John Pidgeon07964 005989
Top Related