Avaya Proactive Contact Release 4.0Maintenance and Troubleshooting
March 2008
© 2008 Avaya Inc. All Rights Reserved.
NoticeWhile reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Avaya Inc. can assume no liability for any errors. Changes and corrections to the information in this document might be incorporated in future releases.
Documentation disclaimerAvaya Inc. is not responsible for any modifications, additions, or deletions to the original published version of this documentation unless such modifications, additions, or deletions were performed by Avaya. Customer and/or End User agree to indemnify and hold harmless Avaya, Avaya's agents, servants and employees against all claims, lawsuits, demands and judgments arising out of, or in connection with, subsequent modifications, additions or deletions to this documentation to the extent made by the Customer or End User.
Link disclaimerAvaya Inc. is not responsible for the contents or reliability of any linked Web sites referenced elsewhere within this documentation, and Avaya does not necessarily endorse the products, services, or information described or offered within them. We cannot guarantee that these links will work all the time and we have no control over the availability of the linked pages.
WarrantyAvaya Inc. provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. In addition, Avaya�s standard warranty language, as well as information regarding support for this product, while under warranty, is available through the Avaya Support Web site:http://www.avaya.com/support
LicenseUSE OR INSTALLATION OF THE PRODUCT INDICATES THE END USER'S ACCEPTANCE OF THE TERMS SET FORTH HEREIN AND THE GENERAL LICENSE TERMS AVAILABLE ON THE AVAYA WEB SITEhttp://support.avaya.com/LicenseInfo/("GENERAL LICENSE TERMS"). IF YOU DO NOT WISH TO BE BOUND BY THESE TERMS, YOU MUST RETURN THE PRODUCT(S) TO THE POINT OF PURCHASE WITHIN TEN (10) DAYS OF DELIVERY FOR A REFUND OR CREDIT.Avaya grants End User a license within the scope of the license types described below. The applicable number of licenses and units of capacity for which the license is granted will be one (1), unless a different number of licenses or units of capacity is specified in the Documentation or other materials available to End User. "Designated Processor" means a single stand-alone computing device. "Server" means a Designated Processor that hosts a software application to be accessed by multiple users. "Software" means the computer programs in object code, originally licensed by Avaya and ultimately utilized by End User, whether as stand-alone Products or pre-installed on Hardware. "Hardware" means the standard hardware Products, originally sold by Avaya and ultimately utilized by End User.
License type(s)
Copyright Except where expressly stated otherwise, the Product is protected by copyright and other laws respecting proprietary rights. Unauthorized reproduction, transfer, and or use can be a criminal, as well as a civil, offense under the applicable law.
Third-party componentsCertain software programs or portions thereof included in the Product may contain software distributed under third party agreements ("Third Party Components"), which may contain terms that expand or limit rights to use certain portions of the Product ("Third Party Terms"). Information identifying Third Party Components and the Third Party Terms that apply to them is available on the Avaya Support Web site:http://support.avaya.com/ThirdPartyLicense/
Preventing toll fraud"Toll fraud" is the unauthorized use of your telecommunications system by an unauthorized party (for example, a person who is not a corporate employee, agent, subcontractor, or is not working on your company's behalf). Be aware that there can be a risk of toll fraud associated with your system and that, if toll fraud occurs, it can result in substantial additional charges for your telecommunications services.
Avaya fraud interventionIf you suspect that you are being victimized by toll fraud and you need technical assistance or support, call Technical Service Center Toll Fraud Intervention Hotline at +1-800-643-2353 for the United States and Canada. For additional support telephone numbers, see the Avaya Support Web site:http://www.avaya.com/support
TrademarksAvaya and the Avaya logo are either registered trademarks or trademarks of Avaya Inc. in the United States of America and/or other jurisdictions.
All other trademarks are the property of their respective owners.
Downloading documentsFor the most current versions of documentation, see the Avaya Support Web site:http://www.avaya.com/support
114549Avaya supportAvaya provides a telephone number for you to use to report problems or to ask questions about your product. The support telephone number is 1-888-732-3343 in the United States. For additional support telephone numbers, see the Avaya Support Web site:http://www.avaya.com/support
To provide feedback on this document, send email to [email protected].
Maintenance and Troubleshooting Guide March 2008 1
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Purpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Reasons for reissue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Related documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Hardware maintenance large cabinet and PG230 . . . . . . . . . . . . . . . . . . . . . . . 15Reseat or replace current supported cards . . . . . . . . . . . . . . . . . . . . . . . . 15Reseat or replace obsolete cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Obsolete cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Ribbon cable from the SWI to the NBC. . . . . . . . . . . . . . . . . . . . . . . . . 18
Avaya Proactive Contact dialer troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 21Enhanced Network Bus Controller (ENBC) . . . . . . . . . . . . . . . . . . . . . . . . 21
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Solutions for red or yellow LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Large Port Voice Card (LPVC2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Solutions for red or yellow LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Enhanced Universal Trunk card (EUTC) . . . . . . . . . . . . . . . . . . . . . . . . . . 25LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Operator Line Interface card (OLIC2). . . . . . . . . . . . . . . . . . . . . . . . . . . . 26LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Quad digital trunk cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Quad T1 (QT1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Quad T1 primary rate interface card (QT1-PRI) . . . . . . . . . . . . . . . . . . . . 29Quad E1-Channel Associated Signaling 120 Ohm (QE1-CAS 120) . . . . . . . . . . 30Quad E1Primary Rate ISDN 120 Ohm (QE1-PRI 120) . . . . . . . . . . . . . . . . . 31Quad E1-Channel Associated Signaling 75 Ohm (QE1-CAS 75) . . . . . . . . . . . 33Quad E1- Primary Rate ISDN 75 Ohm (QE1-PRI 75) . . . . . . . . . . . . . . . . . . 34
Digital Signal Processor -2 (DSP2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Internet Protocol Telephony Card (IPTC). . . . . . . . . . . . . . . . . . . . . . . . . . 37
Software Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Understanding backup and restore operations . . . . . . . . . . . . . . . . . . . . . . 39Using backup and restore commands . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Monitor the DAT drive status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Contents
2 Maintenance and Troubleshooting Guide March 2008
Various options for Backup and Restore . . . . . . . . . . . . . . . . . . . . . . . . . 41Back up the complete system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Back up the system and calling lists . . . . . . . . . . . . . . . . . . . . . . . . . . 42Back up Avaya Proactive Contact system files . . . . . . . . . . . . . . . . . . . . 42Back up system configuration files . . . . . . . . . . . . . . . . . . . . . . . . . . 43Back up system data/stat files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Restore all the data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Restore a file from archive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45List/Verify a file in archive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46List/Verify archive contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46List archive volume information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Back up all calling lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Back up a specific calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Restore all calling lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Restore a specific calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Back up a database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Restore a database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Error messages and message type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Troubleshooting questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Unable to start jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121List did not download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Agent cannot connect- dialback failure - unable to login - headset in use . . . . . . . 123Reports not working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Analyst - GUI based reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123PC Analysis - UNIX Based Reporting. . . . . . . . . . . . . . . . . . . . . . . . . . 124
Call completion codes such as line Idle, busy, or hung up in queue, appears excessively 124Internet Monitor issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Changes affecting performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Message Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Message Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Agent key files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Upload/Download list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Dialer event Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Completion Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Message Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Back ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Data pops (slow or none) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Maintenance and Troubleshooting Guide March 2008 3
Predictive Blend not acquiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Detailed troubleshooting questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Networking Issues: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Hardware troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
General hardware issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130Avaya CPU Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Digital Switch Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Telephony Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Telephony & Switch Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Software Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
General software issues. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Mid-Tier Services Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Supervisor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138Database Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Avaya Proactive Contact Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . 141Verify software is running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141CORBA services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
nsls script fails to list names in Naming_Service . . . . . . . . . . . . . . . . . . . 142Some services fail to start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Sales Verification testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143CCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
CCS not running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143CCS not passing requests to DCCS server . . . . . . . . . . . . . . . . . . . . . . 144
DCCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144DCCS processing errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144DCCS and Corba problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144DCCS crashes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144DCCS general troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Jobs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146Using Test Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146Job will not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148Jobs ends just after start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148Invalid headset ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149Agent profile will not execute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149Selection list Unavailable for use. . . . . . . . . . . . . . . . . . . . . . . . . . . . 150Job in test mode ignores keystrokes. . . . . . . . . . . . . . . . . . . . . . . . . . 150General Job troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
CTI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
4 Maintenance and Troubleshooting Guide March 2008
Installation: Verify CTI link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152CTO OAM Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157CTI Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158Troubleshooting tips for Avaya CTI . . . . . . . . . . . . . . . . . . . . . . . . . . 159
StatsPump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160Mid-Tier Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Mid-Tier database network problems . . . . . . . . . . . . . . . . . . . . . . . . . 161Mid-Tier database not running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161Verify Mid-Tier components can access database . . . . . . . . . . . . . . . . . . 162
Mid-Tier Data Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162Dialer Mid-Tier connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163Historical Data Server Component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
HDCC troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Recovering in the event of media failure. . . . . . . . . . . . . . . . . . . . . . . . 168Common Oracle errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
End user applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170Analyst . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Error message, source and error description table . . . . . . . . . . . . . . . . . . . . . . 175
Error message text and source file table. . . . . . . . . . . . . . . . . . . . . . . . . . . . 269Cannot transfer inbound call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385Command failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387Timed out waiting for <message> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389Operator monitor process does not respond . . . . . . . . . . . . . . . . . . . . . . . 391Agent <name> logged in Already - Access Denied . . . . . . . . . . . . . . . . . . . . 393Unable to send message to porter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395Password has expired. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397<agent><agent_name> - Operator number returned invalid <slot_num> . . . . . . . . 399Incorrect message type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401Incorrect number of arguments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403Must select unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405Failed to allocate memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407Audio file name too long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409Bad argument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411
Maintenance and Troubleshooting Guide March 2008 5
ERROR - Unknown file descriptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413Invalid entry for <name> in <filename> . . . . . . . . . . . . . . . . . . . . . . . . . . 415Field has incorrect length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417Bad file descriptor <num>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419Invalid headset number <num> <line> . . . . . . . . . . . . . . . . . . . . . . . . . . . 421Failed to initialize screen environment. . . . . . . . . . . . . . . . . . . . . . . . . . . 423Invalid line selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425Invalid logical connector <name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427Invalid recall code <num>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429Invalid ring count <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431Invalid time format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433Conference in progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435Field not defined in calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437Unable to create file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439agent - Failed to read from file <name> . . . . . . . . . . . . . . . . . . . . . . . . . . 441Failed to unlock file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443Warning: CFRM message truncated . . . . . . . . . . . . . . . . . . . . . . . . . . . . 445Callbacks are not permitted on inbound calls . . . . . . . . . . . . . . . . . . . . . . . 447Field <name> not defined in calling list <filename>. . . . . . . . . . . . . . . . . . . . 449clstat <xfd> failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451Failed to remove file <filename> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453Clear fdict <number> failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 455Date is before the current date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457Incoming command exceeded maximum buffer size . . . . . . . . . . . . . . . . . . . 459<string>: Confirm error (num) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 461File corruption or record size mismatch detected in calling list (name> . . . . . . . . 463CTI Error: <string><num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465CTI not configured for agent events . . . . . . . . . . . . . . . . . . . . . . . . . . . . 467Duplicate ALL phone numbers specification . . . . . . . . . . . . . . . . . . . . . . . 469Duplicate country specified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471Environment variable not set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 473OnEventEstablished: Unknown command (7) . . . . . . . . . . . . . . . . . . . . . . . 475Recall attempt can�t exceed <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . 477Extra comma in selection criteria. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479Failed to setup command keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 481Failed to lock file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 483
6 Maintenance and Troubleshooting Guide March 2008
Failed to initialize keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485Failed to open directory <dir_name>. . . . . . . . . . . . . . . . . . . . . . . . . . . . 487Failed to read file header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489Failed to initialize switcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491Fail to load record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493Fatal error on select - <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495Field name <name> is invalid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 497Invalid field value <value>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 499Missing or invalid entry in file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501File <filename> exists, but is not readable by user <user_name. . . . . . . . . . . . . 503File <filename> exists, but cannot be written by user <user_name . . . . . . . . . . . 505File <filename> does not exist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507File did not close. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509No space on file system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511Unequal phone number field lengths in file <name> . . . . . . . . . . . . . . . . . . . 513Field value not in acceptable list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 515 Entry <value> missing/invalid in <filename> file . . . . . . . . . . . . . . . . . . . . . 517Gap found between selection criteria lines . . . . . . . . . . . . . . . . . . . . . . . . 519Headset <id_num> not specified in dgswitch.cfg file . . . . . . . . . . . . . . . . . . . 521Headset port number <num> out of range . . . . . . . . . . . . . . . . . . . . . . . . . 523<agent_name> - Exceeded operator slots available, MAXOPS is low . . . . . . . . . . 525Inbound agents only permitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527Invalid answer delay time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 529Invalid call detection mode <name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531CSTAUniversalConfEvent for call monitor, error = 24. . . . . . . . . . . . . . . . . . . 533Invalid format character found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535invalid channel number <string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 537Invalid DAA type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 539Invalid date format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 541Invalid delay specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543Invalid file name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 545New password entered is invalid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 547Invalid offhook retry delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 549Invalid phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 551Invalid phone <number> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 553Invalid phone number length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555
Maintenance and Troubleshooting Guide March 2008 7
Invalid phonestat - <status>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 557Original password is invalid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 559Invalid pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 561Invalid recall code <code> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 563 Invalid response from operator monitor process. . . . . . . . . . . . . . . . . . . . . 565Invalid range character . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567Invalid ring count <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 569Invalid time zone character <char> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 571Invalid use of ALL phone numbers specification . . . . . . . . . . . . . . . . . . . . . 573Invalid VM2 locale code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 575Invalid wait limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 577Failed to invoke function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 579IPC - invalid input argument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 581IPC - invalid ipc entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583Invalid ipc number <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585<process_name> - Accessing bad semaphore . . . . . . . . . . . . . . . . . . . . . . 587<process_name> - Failed to open semaphore, err(<num>). . . . . . . . . . . . . . . . 589<process_name> - Failed on semaphore operation, err <err_num> key = <sem_key_id> code = <op_code> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 591
<process_name> Failed on semaphore removal, err=<num> key=<num> . . . . . . . 593IPC - Failed to open opmon message queue . . . . . . . . . . . . . . . . . . . . . . . 595Response message too long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 597IVR_SCRIPT is blank in job <name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . 599Failed to create jobmon graphical user interface (GUI) . . . . . . . . . . . . . . . . . . 601Job <name> not running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603Job <name> is not valid for IVR agents . . . . . . . . . . . . . . . . . . . . . . . . . . 605Error loading job chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607Attempt to store list_client on host failed . . . . . . . . . . . . . . . . . . . . . . . . . 609Line not released . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 611Mastercfg error. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 613Failed to determine max number of phones . . . . . . . . . . . . . . . . . . . . . . . . 615Unable to remove message queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 617Missing delay specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 619Missing high range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 621Missing completion code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 623Missing line type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 625
8 Maintenance and Troubleshooting Guide March 2008
Missing or invalid num of chars to strip . . . . . . . . . . . . . . . . . . . . . . . . . . 627Missing phone numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 629Missing prefix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 631Missing limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 633Missing suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 635Missing or invalid low range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 637Missing or invalid reject phone number pattern. . . . . . . . . . . . . . . . . . . . . . 639Missing or invalid time zone designation . . . . . . . . . . . . . . . . . . . . . . . . . 641Missing time zone specification for country <num> . . . . . . . . . . . . . . . . . . . 643MakeCall/MakePredictiveCall/TransferCall Confirm error (33) . . . . . . . . . . . . . . 645<type> agents are not permitted on this job . . . . . . . . . . . . . . . . . . . . . . . . 647Must specify transfer job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 649Failed to attach shared memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 651Cannot open channel to operator monitor process . . . . . . . . . . . . . . . . . . . . 653Failed to detach shared memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 655No DONE_TME setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657Failed to find linked job file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 659Unable to open keys file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 661Failed to get message queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 663Unable to receive a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 665Failed to send message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 667No more records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 669Field has non-numeric value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 671No previous record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 673Failed to process file <filename> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 675Cannot be DONE from alternate screen . . . . . . . . . . . . . . . . . . . . . . . . . . 677Non-directory in directory path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 679<process_name> failed to read from file <filename> . . . . . . . . . . . . . . . . . . . 681Recall not allowed for inbound call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 683No record found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 685No REL_DIST setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 687No REL_TME setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 689Failed to remove shared memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 691Sales verification with unit work lists is not permitted . . . . . . . . . . . . . . . . . . 693Missing std to dial phone number format . . . . . . . . . . . . . . . . . . . . . . . . . 695Not a calling list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 697
Maintenance and Troubleshooting Guide March 2008 9
Unable to become root privilege for setting password . . . . . . . . . . . . . . . . . . 699Cannot find time zone for phone number . . . . . . . . . . . . . . . . . . . . . . . . . 701Failed to create window pointer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 703Failed to write to file <filename> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 705Only outbound agents permitted by sales verification . . . . . . . . . . . . . . . . . . 707Outbound or Managed agents only permitted . . . . . . . . . . . . . . . . . . . . . . . 709<opname> operation failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 711<op_name> operation failed for file <file_name> . . . . . . . . . . . . . . . . . . . . . 713<string><string>- Operator number returned wrong <num1>, job number <num2> . . 715Operator slot semaphore not available . . . . . . . . . . . . . . . . . . . . . . . . . . 717Headset value (<headset_value>, <return_value>) out of bound. . . . . . . . . . . . . 719Outbound agents only permitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 721Pattern error at line <number> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 723Pattern error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 725Telephone line not available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 727Telephone line not offhook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 729Phone number too long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 731Timed out waiting for response from porter . . . . . . . . . . . . . . . . . . . . . . . . 733Password can not be changed, change limit not expired. . . . . . . . . . . . . . . . . 735Preview record search failed to initialize. . . . . . . . . . . . . . . . . . . . . . . . . . 737Changes to record not saved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 739Recall can't be less than <num> minutes . . . . . . . . . . . . . . . . . . . . . . . . . 741Range does not come after previous range . . . . . . . . . . . . . . . . . . . . . . . . 743Recall time and date outside timezone. . . . . . . . . . . . . . . . . . . . . . . . . . . 745Record is no longer available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 747Record currently in use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 749Rejected phone number (L<num>) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 751Field entry is required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 753Route End Error: RegReqID = <num>, CrossRefID = <num>, Error = <num> . . . . . . 755Report failed, system out of space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 757Molocale - unknown language name <lang>. . . . . . . . . . . . . . . . . . . . . . . . 759Selection list not available for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 761Could not verify selection list for job. . . . . . . . . . . . . . . . . . . . . . . . . . . . 763Selection list not created with this calling list . . . . . . . . . . . . . . . . . . . . . . . 765Could not verify selection list for job. . . . . . . . . . . . . . . . . . . . . . . . . . . . 767Cannot find service in /etc/services . . . . . . . . . . . . . . . . . . . . . . . . . . . . 769
10 Maintenance and Troubleshooting Guide March 2008
Caught signal number <num> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 771Caught signal <num> and terminated . . . . . . . . . . . . . . . . . . . . . . . . . . . 773Socket call failed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 775Unable to setup listen on socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 777Socket failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 779Socket connection to list server running on <name> failed . . . . . . . . . . . . . . . 781STATUSFLAG field missing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 783Failed to process line (<line_buffer_name>). . . . . . . . . . . . . . . . . . . . . . . . 785tget returned error number <num> raising signal <num> . . . . . . . . . . . . . . . . 787<string>-<string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 789Timed out waiting for <string> confirmation. . . . . . . . . . . . . . . . . . . . . . . . 791Calling list <name> is not in shared memory . . . . . . . . . . . . . . . . . . . . . . . 793Calling list line count does not match shared memory . . . . . . . . . . . . . . . . . . 795Invalid normal trunk equipment number <num> . . . . . . . . . . . . . . . . . . . . . 797Normal trunk port number <num> out of range . . . . . . . . . . . . . . . . . . . . . . 799Unable to bind to local address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 801Unable to accept connection on socket . . . . . . . . . . . . . . . . . . . . . . . . . . 803Unable to access host <name> using name . . . . . . . . . . . . . . . . . . . . . . . . 805Unable to connect to socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 807Failed to create directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 809Failed to read calling list definition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 811Unable to open list <calling_list_name> . . . . . . . . . . . . . . . . . . . . . . . . . . 813Process unable to send <string> to <process_name> . . . . . . . . . . . . . . . . . . 815Unable to send data to socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 817Molocale - failed to set locale <name> . . . . . . . . . . . . . . . . . . . . . . . . . . . 819Call blending is not available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 821Unequal phone number field lengths in file <filename> . . . . . . . . . . . . . . . . . 823Unknown Command message - <command> . . . . . . . . . . . . . . . . . . . . . . . 825Unknown IPC message - <string> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 827Incorrect job type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 829Unknown screen type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 831Unit value not found, or unavailable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 833Linking between virtual agent jobs and non-virtual jobs is not permitted. . . . . . . . 835Unable to open file. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 837Failed to find screen <name> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 839Write error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 841
Maintenance and Troubleshooting Guide March 2008 11
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 843
12 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 13
Preface
This section contains the following topics:
● Purpose on page 13
● Audience on page 13
● Reasons for reissue on page 13
● Related documents on page 14
PurposeThe purpose of this guide is to provide detailed information for hardware and software maintenance for the Avaya Proactive Contact 4.0 system. It also includes up to date troubleshooting for hardware and software maintenance for the Avaya Proactive Contact 4.0 system.
Audience
This guide is for personnel who install, configure, and troubleshoot Avaya Proactive Contact installations.
Reasons for reissue
Avaya Proactive Contact 4.0 is a major new release of the Avaya Proactive Contact (previously known as PDS), featuring substantial advances in core functionality, new deployment options, and updates to the underlying platform technology.
Avaya Proactive Contact 4.0 provides you with three system deployment options tailored to meet your specific call center requirements:
● Avaya Proactive Contact with AES.
14 Maintenance and Troubleshooting Guide March 2008
● Avaya Proactive Contact with Avaya PG230 Proactive Contact Gateway (available with an Avaya-provided server)
● Avaya Proactive Contact system (with the traditional system cabinet)
This release supports simple migrations between the different deployments allowing you to start small and easily upgrade to a larger system.
All configurations use the same robust Avaya Proactive Contact core predictive dialing application and the same client suite called Avaya Proactive Contact Supervisor. The application suite includes Monitor, Editor, Analyst, and a new Health Manager application designed to help you monitor and administer system functions. Changes were also made to provide a more robust, simplified version of the current feature set, as well as simplified configuration and installation of the system. Powerful tools such as Hierarchy Manager and Completion Code Manager continue to be supported.
Avaya Proactive Contact 4.0 introduces an updated predictive dialing algorithm with a revolutionary operating mode called Cruise Control, which allows you to achieve even higher operational efficiencies than were previously possible with Avaya PDS version 12.0.
Related documents● Planning and Prerequisites for Avaya Proactive Contact
● Installing and Configuring Avaya Proactive Contact
● Administering Avaya Proactive Contact (UNIX-based Interface)
● Using Avaya Proactive Contact Supervisor
● Using Avaya Proactive Contact Analyst
● Avaya Proactive Contact Safety and Regulatory Information
● Avaya Proactive Contact Documentation Library (CD-ROM)
Maintenance and Troubleshooting Guide March 2008 15
Hardware maintenance large cabinet and PG230
This section details the hardware maintenance tasks required for the large cabinet and PG230. The maintenance involves replacing or reseating cards. The topics covered in this section are:
● Reseat or replace current supported cards
● Reseat or replace obsolete cards
Reseat or replace current supported cards
To reseat or replace a card follow these steps:
1. Power down the switch and the card cage.
2. Slide the board into the card slot.
16 Maintenance and Troubleshooting Guide March 2008
3. Hook the tabs onto the upper and lower lips of the card shelf.
4. Press firmly on the tabs to seat the board.
Reseat or replace obsolete cardsThese cards are still in use but are no longer shipping. The topics covered in this section are:
Maintenance and Troubleshooting Guide March 2008 17
Obsolete cardsTo remove the SWI card, follow these steps:
1. Shut down Digital Switch Controller (DSC) through the menu system.
2. Wait for the File System Successfully Closed message on the Switch Console screen.
3. Power off the Digital Switch Controller.
4. Unscrew the 1/8 inch Phillip's head screws on both sides of the card.
Note:Note: The screws do not need to be removed entirely from card.
5. Pull outward on tabs on both sides of the SWI card as shown below:
6. Pull the card out of the card slot.
7. Place the card on a static-proof mat or in a static-proof bag.
To replace the card with a new card:
1. Verify that the jumper settings on replacement card are the same as on the original.
2. Insert the card into the same slot that you removed the previous card from.
3. Push in card at points just inside the tabs on both sides of the card as shown below until card is firmly seated.
4. Tighten the screws on both sides of the card.
18 Maintenance and Troubleshooting Guide March 2008
5. Restart the DSC.
Ribbon cable from the SWI to the NBCThe ribbon cable from the SWI to the NBC originates on the back of the Digital Switch Controller (DSC). A metal cable housing clamps this ribbon cable in place to prevent it unseating itself. In order to reseat or replace this cable, you must loosen the housing clamp and remove the housing from the DSC.
Follow these steps to reseat or replace the ribbon cable:
1. Loosen the screws identified as Step1 in the illustration to clamp and un-clamp the ribbon cable.
Maintenance and Troubleshooting Guide March 2008 19
2. Loosen the screws identified as Step 2 in the illustration to slide the clamp plate up and down. Reseat the ribbon cable if necessary.
3. If you need to replace the ribbon cable, you need to remove the screws labeled Step 3 in the illustration.
4. Replace the ribbon cable if necessary.
In step 5, pull the card straight back out of the slot without pulling outwards on the tabs on either side of the card as illustrated in the following:
Make sure to push the A RESET button so that the DSC reboots after the file system has been shut down through the menus. Switch the A-AUTO-B switch to the "A" position so that in normal operation the switch auto boots after a crash.
20 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 21
Avaya Proactive Contact dialer troubleshooting
This section details solutions for hardware related issues in the Avaya Proactive Contact dialer. The two versions of the Avaya Proactive Contact hardware dialer are:
● Avaya Proactive Contact System
● Avaya Proactive Contact with PG230
The telecommunications switching component in each version is the same Avaya proprietary switch.
The cards covered in this section are the:
● Enhanced Network Bus Controller (ENBC)
● Large Port Voice Card (LPVC2)
● Enhanced Universal Trunk card (EUTC)
● Operator Line Interface card (OLIC2)
● Quad digital trunk cards
● Digital Signal Processor -2 (DSP2)
● Internet Protocol Telephony Card (IPTC)
Enhanced Network Bus Controller (ENBC)
The ENBC card is the CPU for the digital switch. It runs the switch generic software, which controls all aspects and operation of the switch.
22 Maintenance and Troubleshooting Guide March 2008
! WARNING:!
WARNING: Never pull or reinsert the ENBC card in a slot while the switch is powered up. Never pull or reinsert the NBC cable or SCSI cable while the switch is powered up. This may cause severe damage to the ENBC.
! WARNING:!
WARNING: The only method for powering off the card cage (and therefore the ENBC Card) is to power off the UPS or disconnect the digital switch Power Supply from the power source. The digital switch does not have a built-in on/off switch.
LED indicators
Solutions for red or yellow LED
Note:Note: A major alarm anywhere in the switch causes the red LED on the ENBC card to
light, even if there is no problem with the ENBC card.
Note:Note: A minor alarm anywhere in the switch causes the yellow LED on the ENBC card
to light, even if there is no problem with the ENBC card.
Follow these steps to resolve the problem:
1. Check the system log file for error messages related to all cards other than the ENBC.
2. If any error messages exist, troubleshoot those cards.
Red Yellow Green Status
OFF OFF OFF Normal operation
OFF ON OFF Indicates Minor Alarm condition in system. Look at Card and System Alarm screens to determine details of alarm condition.
ON OFF OFF Indicates Major Alarm condition in system. Look at Card and System Alarm screens to determine details of alarm condition.
ON ON OFF Indicates ENBC is being reinitialized, ENBC software download, and self-test.
Maintenance and Troubleshooting Guide March 2008 23
3. Check for alarms on all cards other than the ENBC card. If alarms exist, troubleshoot those alarms.
4. If a red or yellow LED is still lit on the ENBC card, go to step 5.
5. Check the system log file for error messages related to the ENBC.
6. Reboot the switch. If the alarm LED remains lit, proceed to the next step.
7. Power down the switch and reseat the ENBC in slot 1.
8. Restart the switch. If the alarm LED remains lit, proceed to the next step.
9. Check the NBC cable behind slot 1 and connected to I/O Transition Module for a secure fit.
10. If required, power down the switch and reseat the cable.
11. Restart the switch. If the alarm LED remains lit, proceed to the next step.
12. Power down the switch and replace the ENBC.
13. Restart the switch. If the alarm LED remains lit, proceed to the next step.
14. Power down the switch and replace the NBC cable.
Large Port Voice Card (LPVC2)
The standard LPVC2 card carries 16 Mbytes of memory, and provides approximately 35 minutes of local voice storage. A larger version of the LPVC2 is an available option that carries 32 Mbytes of memory for 70 minutes of storage capacity. The LPVC2 has a direct connection to the ENBC I/O Transition Module over a SCSI bus. The connection enables the card to store and retrieve voice messages to and from the hard drive.
24 Maintenance and Troubleshooting Guide March 2008
! WARNING:!
WARNING: Never remove, reseat or replace the SCSI cable behind the LPVC while the ENBC or card cage are powered on.
LED indicators
Solutions for red or yellow LEDFollow these steps to resolve the problem:
1. Check system log file for error messages related to the card in slot 3.
2. Check the Card Alarm screen in the Card Maintenance menu.
3. Try activating the LPVC via the Card Maintenance menu. If the LED remains lit, proceed to the next step.
4. Reseat the LPVC card.
5. Restart the system. If the LED remains lit, proceed to the next step.
6. Power down the system and reseat the SCSI cable at both ends.
7. Restart the system. If the LED remains lit, proceed to the next step.
Red Yellow Green Status
OFF OFF OFF Normal operation
OFF ON OFF Indicates Minor Alarm condition in system. Look at Card Alarm screen to determine details of alarm condition.
ON OFF OFF Indicates Major Alarm condition in system. Look at Card Alarm screen to determine details of alarm condition.
FLASH FLASH FLASH All flashing in sequence indicates the LPVC is receiving a download from Avaya Proactive Contact.
ON ON ON LPVC self test. Should only last 60 or so seconds.
OFF OFF ON Card is in Stand-by, Diagnostic, or Out of service mode.
Maintenance and Troubleshooting Guide March 2008 25
8. Replace the LPVC card.
Enhanced Universal Trunk card (EUTC)
The EUTC is a 16 port, 2-wire, analog card that can operate in Loop Start mode or Ground Start mode. Use the switch menus to configure loop or ground start. This card is rarely used.
LED indicators
SolutionsThe LEDS do not register phone line issues. Test phone lines with either the driver or the swit utility.
If the red LED is lit, replace the EUTC.
Red Yellow Green Status
OFF OFF OFF Normal operation
ON OFF OFF The EUTC has failed the self test.
OFF ON OFF The ENBC is unable to communicate with the EUTC and has stopped polling the EUTC.
OFF OFF ON The EUTC has not been added to the database or has been taken out of service via the Card Maintenance screen.
26 Maintenance and Troubleshooting Guide March 2008
Operator Line Interface card (OLIC2)
The OLIC2 provides 24 4-wire headset connections for use by agents on the dialer. This function is seldom used, as most customers find the digital agent connections, dial-up and dial-back, to be far more efficient and workable. However, in certain environments, where no PBX is present or no agents are used on the PBX, a direct connection for the agents can be utilized. The OLIC2 is specifically designed for this environment.
LED indicators
SolutionsFollow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the OLIC2 card and the OLIC MDF adapter.
2. If there is a minor or major alarm on the OLIC card, on the main switch menu select C > G.
Red Yellow Green Status
OFF OFF OFF Normal operation
ON ON ON OLIC self-test in progress.
ON OFF OFF The OLIC2 has failed the self test on one or more ports.
OFF ON OFF The ENBC is unable to communicate with the OLIC2 and has stopped polling the OLIC2.
OFF OFF ON The OLIC2 has not been added to the database or has been taken out of service via the Card Maintenance screen.
Maintenance and Troubleshooting Guide March 2008 27
3. Use the Maintenance Menu to reset the card.
4. Check Maintenance Menu > Card Maintenance for unavailable ports that are marked with a P.
5. If a port is marked with a P, check the cabling for that port. If the problem persists, go to the next step.
6. If there is no specific alarm on the OLIC card, the problem may be in the OLIC port or in the wiring from the card to the agent�s workstation. To determine if the OLIC port is functioning correctly:
a. Remove the cable from the OLIC adapter for this port.
Note:Note: There are two cables which connect to each OLIC adapter. The top cable is for
ports 1-12.Tthe lower cable is for ports 13-24.
b. To cause the OLIC card to run its self-test, reseat the card. The self-test tests each of the 24 ports. It sends a signal out on the ear pair and expects to receive the same signal on the mouth pair.
c. If the OLIC card resets with no port failures, the problem is with one of the following:
● Cabling from the OLIC adapter to the workstation
● Headset equipment at the workstation
● OLIC adapter
d. If the OLIC card restores with port failures such as Code 4, Code 5, or Code6 on a specific port with no cable attached, then the problem is the OLIC card, go to step 9.
7. Shut down the digital switch and reboot the system. If the problem persists, go to the next step.
8. Reseat the OLIC card. If the problem persists, go to the next step.
9. Swap the OLIC 2 card with a new OLIC 2.
Quad digital trunk cardsThe Quad Digital Trunk Cards (QDTC) are a group of six similar cards that provide all the versions of digital trunking for the switch. Each version of this card is built on a common circuit board. Each card has four separate digital trunking spans of the type supported by the card. The six digital trunking cards are:
● Quad T1 (QT1)
● Quad T1 primary rate interface card (QT1-PRI)
● Quad E1-Channel Associated Signaling 120 Ohm (QE1-CAS 120)
28 Maintenance and Troubleshooting Guide March 2008
● Quad E1Primary Rate ISDN 120 Ohm (QE1-PRI 120)
● Quad E1-Channel Associated Signaling 75 Ohm (QE1-CAS 75)
● Quad E1- Primary Rate ISDN 75 Ohm (QE1-PRI 75)
Quad T1 (QT1)
The card provides spans that comply to the original T1 specification for North America (ANSI T1.105). Each digital span includes four wires, two for the receive direction and two for the transmit direction. There are 24 pulse code modulated (PCM) time slots on the T1 span that provide 24 voice channels, with signaling provided by using low order bits in the voice channels, Robbed-Bit Signaling, in such a way that the overall voice quality is not significantly affected.
LED indicators
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QT1 card.
2. Check Maintenance Menu > Card Alarm for alarms.
Red Yellow Green Status
ON ON ON Self-test in progress.
FLASH FL:ASH FLASH QT1.dwn file being downloaded.
OFF OFF OFF Normal operation
ON OFF OFF Carrier loss, OOF detected.
OFF ON OFF Remote alarm detected.
OFF OFF ON Waiting for the ENBC card to initialize communications.
Maintenance and Troubleshooting Guide March 2008 29
3. Us the Maintenance Menu > Card Maintenance to reset the specific T1 causing the alarm.
4. Shut down the digital switch and reseat the T1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
6. Request the T1 provider to reset the T1 and check cable connections. If the problem persists, go to the next step.
7. Try reconnecting the T1 cable to a different slot. If the trouble follows the cable, work with the far end of the T1 to resolve. If the trouble remains with the slot, replace the QT1 or the QT1 trunk adapter or both cards if necessary.
Quad T1 primary rate interface card (QT1-PRI)
The QT1-PRI card uses the same 24 channel format as the QT1 with one voice channel for use as a D-channel for signaling. This provides the 23B+D service that consists of 23 Bearer, or voice channels, and one Data, or signaling channel. This card is NFAS compatible.
LED indicators
Red Yellow Green Status
ON ON ON Self-test in progress.
FLASH FL:ASH FLASH QT1.dwn file being downloaded.
OFF OFF OFF Normal operation
ON OFF OFF Carrier loss, OOF detected.
OFF ON OFF Remote alarm detected.
OFF OFF ON Waiting for the ENBC card to initialize communications.
30 Maintenance and Troubleshooting Guide March 2008
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QT1-PRI card.
2. Check Maintenance Menu > Card Alarm for alarms.
3. Us the Maintenance Menu > Card Maintenance to reset the specific T1 causing the alarm.
4. Shut down the digital switch and reseat the T1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
6. Request the T1 provider to reset the T1 and check cable connections. If the problem persists, go to the next step.
7. Try reconnecting the T1 cable to a different slot. If the trouble follows the cable, work with the far end of the T1 to resolve. If the trouble remains with the slot, replace the QT1-PRI or the trunk adapter or both cards if necessary.
Quad E1-Channel Associated Signaling 120 Ohm (QE1-CAS 120)
The QE1-CAS 120 card uses the E1-CAS digital transmission that is defined in ITU G.703 and Q.421. Each digital span includes four wires, two for the receive direction and two for the transmit direction. It uses 32 time slots to carry one framing channel, one signaling channel, and 30 PCM voice channels. The eight bits in the signaling channel are shared over time to provide signaling bits for each voice channel to indicate things like off-hook, answer, clearing, and more.
The 120 Ohm designation signifies that the wire interface for these spans is twisted pair cabling, which has an approximate impedance of 120 ohms at 2 MHz.
LED indicators
Red Yellow Green Status
ON ON ON Self-test in progress.
FLASH FL:ASH FLASH QE1.dwn file being downloaded.
Maintenance and Troubleshooting Guide March 2008 31
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QE1-CAS 120 card.
2. Check Maintenance Menu > Card Alarm for alarms.
3. Us the Maintenance Menu > Card Maintenance to reset the specific E1 causing the alarm.
4. Shut down the digital switch and reseat the E1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
6. Request the E1 provider to reset the E1 and check cable connections. If the problem persists, go to the next step.
7. Try reconnecting the E1 cable to a different slot. If the trouble follows the cable, work with the far end of the E1 to resolve. If the trouble remains with the slot, replace the QE1-CAS 120 or the trunk adapter or both cards if necessary.
Quad E1Primary Rate ISDN 120 Ohm (QE1-PRI 120)
The QE1-PRI 120 card uses the E1-PRI digital transmission which has the same physical and electrical facilities as E1-CAS, with the E1-CAS signaling channel replaced with a D-channel in the ISDN version. Otherwise the spans look the same. This scheme gives 30B+D capabilities, for an increase of 7 voice channels over the T1-PRI. The QE1-PRI 120 card uses the 120 ohm connection method on twisted pair cabling.
OFF OFF OFF Normal operation
ON OFF OFF Carrier loss, OOF detected.
OFF ON OFF Remote alarm detected.
OFF OFF ON Waiting for the ENBC card to initialize communications.
32 Maintenance and Troubleshooting Guide March 2008
LED indicators
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QE1-PRI 120 card.
2. Check Maintenance Menu > Card Alarm for alarms.
3. Us the Maintenance Menu > Card Maintenance to reset the specific E1 causing the alarm.
4. Shut down the digital switch and reseat the E1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
6. Request the E1 provider to reset the E1 and check cable connections. If the problem persists, go to the next step.
7. Try reconnecting the E1 cable to a different slot. If the trouble follows the cable, work with the far end of the E1 to resolve. If the trouble remains with the slot, replace the QE1-PRI 120120 or the trunk adapter or both cards if necessary.
Red Yellow Green Status
ON ON ON Self-test in progress.
FLASH FL:ASH FLASH qe1pri.dwn file being downloaded.
OFF OFF OFF Normal operation
ON OFF OFF Carrier loss, OOF detected.
OFF ON OFF Remote alarm detected.
OFF OFF ON Waiting for the ENBC card to initialize communications.
Maintenance and Troubleshooting Guide March 2008 33
Quad E1-Channel Associated Signaling 75 Ohm (QE1-CAS 75)
The 75 ohm version of the QE1-CAS card is similar to the 120 ohm version. However, the 75 ohm version uses two coaxial cables instead of two pairs of twisted wires. The impedance of the interface is 75 ohms at 2 MHz.
LED indicators
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QE1-CAS 75 card.
2. Check Maintenance Menu > Card Alarm for alarms.
3. Us the Maintenance Menu > Card Maintenance to reset the specific E1 causing the alarm.
4. Shut down the digital switch and reseat the E1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
Red Yellow Green Status
ON ON ON Self-test in progress.
FLASH FL:ASH FLASH QE1.dwn file being downloaded.
OFF OFF OFF Normal operation
ON OFF OFF Carrier loss, OOF detected.
OFF ON OFF Remote alarm detected.
OFF OFF ON Waiting for the ENBC card to initialize communications.
34 Maintenance and Troubleshooting Guide March 2008
6. Request the E1 provider to reset the E1 and check cable connections. If the problem persists, go to the next step.
7. Try reconnecting the E1 cable to a different slot. If the trouble follows the cable, work with the far end of the E1 to resolve. If the trouble remains with the slot, replace the QE1-CAS 75 or the trunk adapter or both cards if necessary.
Quad E1- Primary Rate ISDN 75 Ohm (QE1-PRI 75)
The 75 ohm version of the QE1-PRI card is similar to the 120 ohm version. However, the 75 ohm version uses two coaxial cables, one for transmit and one for receive, instead of two pairs of twisted wires. The impedance of the interface is 75 ohms at 2 MHz.
LED indicators
Solutions
Follow these steps to resolve issues:
1. Check the system log for error messages related to the slots containing the QE1-PRI 75 card.
Red Yellow Green Status
ON ON ON Self-test in progress.
FLASH FLASH FLASH QE1.dwn file being downloaded.
OFF OFF OFF Normal operation
ON OFF OFF Carrier loss, OOF detected.
OFF ON OFF Remote alarm detected.
OFF OFF ON Waiting for the ENBC card to initialize communications.
Maintenance and Troubleshooting Guide March 2008 35
2. Check Maintenance Menu > Card Alarm for alarms.
3. Us the Maintenance Menu > Card Maintenance to reset the specific E1 causing the alarm.
4. Shut down the digital switch and reseat the E1 cable on the backplane of the card cage.
5. Restart the system. If the problem persists, go to the next step.
6. Request the E1 provider to reset the E1 and check cable connections. If the problem persists, go to the next step.
7. Try reconnecting the E1 cable to a different slot. If the trouble follows the cable, work with the far end of the E1 to resolve. If the trouble remains with the slot, replace the QE1-PRI 75 or the trunk adapter or both cards if necessary.
Digital Signal Processor -2 (DSP2)
The Digital Signal Processor 2 (DSP2) card accepts up to four of these DSP applications:
● Call Analysis replaces the Enhanced Call Progress Analyzer (ECPA) and provides real time analysis of a dialed call.
● Conference replaces the Enhanced Conference Card (ECC) and has the capability to conference up to 128 ports together in various combinations.
● Dual tone multifrequency (DTMF) Receiver replaces the Enhanced DTMF Receiver Card (EDRC) and provides the capability to receive DTMF tones.
36 Maintenance and Troubleshooting Guide March 2008
● Tone Generator replaces the Enhanced Digital Tone Generator (EDTG) and provides tone outputs for DTMF and MF dialing and other maintenance and switch usage.
● MFCR2 Transceiver replaces the Enhanced Multi-Frequency Compelled R2 Transceiver (EMFCR2) and produces and receives R2 dialing tones on the network or PBX.
● Digital Dialer replaces the Digital Dialer Card (DDC) and provides 192 DTMF/MF dialing ports.
This card comes in two configurations:
● DSP2-41 - Has 4 DSP devices and one bank of external RAM installed in each section.
● DSP2-11 - Has 1 DSP device and one bank of external RAM installed.
The applications that run on the DSP2 card are configured completely within the Digital Switch menu screens on the Switch Console.
LED indicators
Note that the 331 HB and DSP HB are not on the front panel. SB stands for slow blink, MB for medium blink, and FB for fast blink.
331 HBGreen
DSP HBGreen
Red Yellow Green Status
ON ON ON ON ON Reset in progress.
SB SB OFF OFF OFF Normal operation
ON MB ON ON ON JTAG download
SB OFF OFF OFF ON Internal memory test
SB FB OFF OFF OFF External memory test
SB SB OFF OFF ON Waiting for download
SB SB FB FB FB Card download
Maintenance and Troubleshooting Guide March 2008 37
LED Error conditions
In all cases where an error occurs, remove the card and return it to customer support with details on the error that occurred.
Internet Protocol Telephony Card (IPTC)
The IPTC is still in development. This card will provide approximately 100 IP Telephony voice connections, Voice over Internet Protocol (VoIP). This card is being developed to meet Avaya's commitment to a future IP connected world. It is based on the DSP2 card design and utilizes many of the same circuits. At this time, only H.323 signaling is supported, but SIP is on the list for the future.
331 HB Error
Blink 1 External RAM Bank 0 failure
Blink 2 External RAM Bank 1 failure
Blink 3 External RAM Bank 2 failure
Blink 4 External RAM Bank 3 failure
Blink 5 Internal Block 0 failure
Blink 6 Internal Block 1 failure
Blink 7 Convergence error
Blink 8 External Bank 0 flag missing
Blink 9 Dual port RAM failure
Blink 10 Unexpected interrupt
38 Maintenance and Troubleshooting Guide March 2008
LED indicators
Red Yellow Green Status
ON ON ON Self-test in progress.
FLASH FL:ASH FLASH IPTC.dwn file being downloaded.
OFF OFF OFF Normal operation
OFF OFF ON Waiting for the ENBC card to initialize communications.
Maintenance and Troubleshooting Guide March 2008 39
Software Maintenance
This section contains the following topics:
● Understanding backup and restore operations on page 39
● Using backup and restore commands on page 40
Understanding backup and restore operationsFor local backup and restoration capabilities, you must configure an external DDS tape drive, a third party host, or use the DVD Writer. For more information, see Planning and Prerequisites for Avaya Proactive Contact and Installing and Configuring Avaya Proactive Contact.
Back up the following files on a regular basis:
● outbound calling lists
● inbound calling results
● call activity statistics
● system configuration files
● system data / statistics file
To prevent data loss, Avaya recommends that you follow these guidelines:
● Keep a minimum of two sets of backup. In each set, keep one backup for each day.
● Store one backup set away from your site.
● Store backed up data in a controlled environment. Optimal tape storage environment is 50% relative humidity at 22° C.
● Replace each DDS tape after 100 uses, approximately two years.
● Clean the tape drive monthly using a cleaning tape.
● Replace cleaning tapes after 25 uses.
The standard backup medium is a 4.3 GB DVD. You can also use a 4mm, 90-meter, 2.2 GB digital data storage (DDS) tape or a 9-track tape if you are planning to use a tape drive.
40 Maintenance and Troubleshooting Guide March 2008
Using backup and restore commandsThis section contains the following topics:
● Monitor the DAT drive status on page 40
● Back up the complete system on page 41
● Back up the system and calling lists on page 42
● Back up Avaya Proactive Contact system files on page 42
● Back up system configuration files on page 43
● Back up system data/stat files on page 44
● Restore all the data on page 44
● Restore a file from archive on page 45
● List/Verify a file in archive on page 46
● List/Verify archive contents on page 46
● List archive volume information on page 47
● Back up all calling lists on page 47
● Back up a specific calling list on page 48
● Restore all calling lists on page 48
● Restore a specific calling list on page 49
● Back up a database on page 49
● Restore a database on page 50
Monitor the DAT drive statusYou can monitor the tape drive status during backup and restore procedures. There are two LEDs on the tape drive. The LED on the left is the cassette LED. The LED on the right is the drive LED. When the system uses the tape drive, both lights flash in different color combinations.
Cassette LED Color
Drive LED Color Status
Flashing green Flashing green Write-enabled tape loading or unloading.
Green Green Write-enabled tape loaded and online.
Maintenance and Troubleshooting Guide March 2008 41
Various options for Backup and RestoreYou can use the following for backing up and restoring information on Proactive Contact:
● DAT 72 USB External Tape Drive
● DVD Writable
● A Third Party Host
Back up the complete systemYou can back up the entire root file system contents, including the operating system and the Avaya Proactive Contact system files.
To back up the system:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
3. From the Back Up and Restore Menu, type 2 and press enter to select Local backup /restore/verify option.
4. Type 2 and press enter to select Back up complete system.
Flashing amber Flashing green Write-protected tape loading or unloading.
Amber Green Write-protected tape loaded and online.
Green Flashing green and amber
Media wear. Replace tape or clean tape drive.
Amber Amber High room humidity. Tape cannot load or unload.
Flashing amber Flashing amber Successful power-on self-test.
Flashing amber Amber Unsuccessful power-on self-test.
Cassette LED Color
Drive LED Color Status
42 Maintenance and Troubleshooting Guide March 2008
5. Choose backup media type.
6. After the backup process is completed, store the backup in antistatic environment at the proper temperature and humidity.
Back up the system and calling listsYou can back up the system and all calling lists.
To back up the system and calling lists:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
3. From the Back Up and Restore Menu, type 2 and press enter to select Local backup /restore/verify option.
4. Type 3 and press enter to select Back up system and calling list.
5. The system will ask you the following "Back up system and calling lists - Are you sure?". Type Y for yes and N for no.
6. From ADDITIONAL ENTRY for Back up system and calling lists menu, type I for Incremental backup or F for Full backup
7. The system will ask you the following "Are above entries correct?". Type Y for yes and N for no.
8. Choose the backup media type.
9. Follow the onscreen instructions.
10. After the backup process is completed, store the backup in antistatic environment at the proper temperature and humidity.
Back up Avaya Proactive Contact system filesYou can back up the entire system excluding the calling lists (specifically, excluding all data in the /opt/avaya/pds/xfer/clist directory).
To back up the system files:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
Maintenance and Troubleshooting Guide March 2008 43
3. From the Back Up and Restore Menu, type 2 and press enter to select Local backup /restore/verify option.
4. Type 4 and press enter to select Back up system only.
5. The system will ask you the following "Back up system only - Are you sure?". Type Y for yes and N for no.
6. From ADDITIONAL ENTRY for Back up system only menu, type I for Incremental backup or F for Full backup
7. The system will ask you the following "Are above entries correct?". Type Y for yes and N for no.
8. Choose the backup media type.
9. Follow the onscreen instructions.
10. After the backup process is completed, store the backup in antistatic environment at the proper temperature and humidity.
Back up system configuration filesYou can back up all the system configuration files (all files needed to customize a newly installed system to the customer's specifications).
To back up system configuration files:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
3. From the Back Up and Restore Menu, type 2 and press enter to select Local backup /restore/verify option.
4. Type 5 and press enter to select Back up system configuration files.
5. The system will ask you the following "Back up system configuration files - Are you sure?". Type Y for yes and N for no.
6. From ADDITIONAL ENTRY for Back up system configuration files menu, type I for Incremental backup or F for Full backup
7. The system will ask you the following "Are above entries correct?". Type Y for yes and N for no.
8. Choose the backup media type.
9. Follow the onscreen instructions.
10. After the backup process is completed, store the backup in antistatic environment at the proper temperature and humidity.
44 Maintenance and Troubleshooting Guide March 2008
Back up system data/stat filesYou can back up all data files needed to run reports via the PC Analysis tools. Specifically, all files matching the following patterns:
● /opt/avaya/pds/lists/*.stat
● /opt/avaya/pds/lists/history/*.hist
● /opt/avaya/pds/account/*
If you select any of the above choices, you will next be asked if you want the backup to be incremental or full. In the case of a full back up, the system backs up all files in the specified category. In the case of an incremental back up, the system backs up a file only if it has changed since it was last backed up as part of any full back up.
To back up system data/stat files:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
3. From the Back Up and Restore Menu, type 2 and press enter to select Local backup /restore/verify option.
4. Type 6 and press enter to select Back up system data/stat files.
5. The system will ask you the following " Back up system data/stat files - Are you sure?". Type Y for yes and N for no.
6. From ADDITIONAL ENTRY for Back up system data/stat files menu, type I for Incremental backup or F for Full backup
7. The system will ask you the following "Are above entries correct?". Type Y for yes and N for no.
8. Choose the backup media type.
9. Follow the onscreen instructions.
10. After the backup process is completed, store the backup in antistatic environment at the proper temperature and humidity.
Restore all the dataYou can restore all files from any backup tape created using the backup menu commands (or any file created with the UNIX fbackup utility).
Maintenance and Troubleshooting Guide March 2008 45
To restore all files from a tape:
1. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
2. From the Back Up and Restore Menu, type 2 and press enter to select Local backup /restore/verify option.
3. Type 7 and press enter to select Restore all.
4. The system will ask you the following " Restore all - Are you sure?". Type Y for yes and N for no.
5. Choose the restore media type.
6. Follow the onscreen instructions.
7. After the restore process is completed, store the backup in antistatic environment at the proper temperature and humidity.
! Important:Important: You cannot restore files from backup tapes created on earlier versions of the
system.
Restore a file from archiveTo restore a file from tape:
1. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
2. From the Back Up and Restore Menu, type 2 and press enter to select Local backup /restore/verify option.
3. Type 8 and press enter to select Restore a file.
4. Enter the full filename in the "ADDITIONAL ENTRY for Restore a file" menu.
5. The system will ask you "Are above entries correct?". Type Y for yes and N for no.
6. Choose the backup media type.
7. Locate the DVD drive / tape drive in the system cabinet. Insert the DVD / DDS tape with the existing backup files in the drive.
8. Follow the instructions on the screen.
46 Maintenance and Troubleshooting Guide March 2008
List/Verify a file in archiveTo verify a backup file in archive:
1. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
2. From the Back Up and Restore Menu, type 2 and press enter to select Local backup /restore/verify option.
3. Type 9 and press enter to select List/Verify a file in archive.
4. The system will prompt the following " List/Verify a file in archive - Are you sure?". Type Y for yes and N for no
5. Enter the full filename in the "ADDITIONAL ENTRY for List/Verify a file in archive" menu.
6. The system will ask you "Are above entries correct?". Type Y for yes and N for no.
7. Choose the backup media type.
8. Locate the DVD drive / tape drive in the system cabinet. Insert the DVD / DDS tape with the existing backup files in the drive.
The system displays the byte count, date, size, and file names on the screen during the tape verification process.
9. After verifying the tape, follow the unloading instructions on the screen. Type C to return to the previous menu.
List/Verify archive contentsTo verify a backup file on a tape:
1. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
2. From the Back Up and Restore Menu, type 2 and press enter to select Local backup /restore/verify option.
3. Type 10 and press enter to select List/Verify List/Verify archive contents.
4. The system will prompt the following "List/Verify archive contents - Are you sure?". Type Y for yes and N for no
5. Choose the backup media type.
The system displays the byte count, date, size, and file names on the screen during the tape verification process.
6. After verifying the archive contents, follow the unloading instructions on the screen.
Maintenance and Troubleshooting Guide March 2008 47
List archive volume informationYou can view the creation information on a backup tape.
To view backup volume information:
1. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
2. From the Back Up and Restore Menu, type 2 and press enter to select Local backup /restore/verify option.
3. Type 11 and press enter to select List archive volume information.
4. The system will prompt the following "List archive volume information - Are you sure?". Type Y for yes and N for no
5. Choose the backup media type.
6. The system displays the volume information.
7. After verifying the archive volume, follow the unloading instructions on the screen.
! Important:Important: You cannot restore files from backup tapes created on earlier versions of the
system.
Back up all calling listsYou can back up all calling lists currently on the system. Specifically, all files in the directory /opt/avaya/pds/xfer/clist.
To back up a calling list:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
3. From the Back Up and Restore Menu, type 3 and press enter to select Local backup up/restore calling lists option.
4. Type 2 and press enter to select Back up all calling lists command.
5. The system will ask you the following "Back up all calling lists - Are you sure?". Type Y for yes and N for no.
6. Choose the backup media type.
7. Follow the onscreen instructions.
48 Maintenance and Troubleshooting Guide March 2008
8. After the backup process is completed, store the backup in antistatic environment at the proper temperature and humidity.
Back up a specific calling listYou can choose a specific calling list from the Item List on the right side of the screen. View additional files by scrolling down the list in the standard way.
Note:Note: The files are listed in alphabetical order, and file names with more than 10
characters are truncated in the displayed list. If a truncated file name is selected, however, the correct file is selected and backed up.
To back up a specific calling list:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
3. From the Back Up and Restore Menu, type 3 and press enter to select Local backup up/restore calling lists option.
4. Type 3 and press enter to execute Back up a specific calling list command.
5. Type the item number of the calling list on the right of the command menu that needs to be backed up and press enter.
6. The system will ask you the following "Back up a specific calling list on item <listname> - Are you sure?". Type Y for yes and N for no.
7. Choose the backup media type.
8. Follow the onscreen instructions.
9. After the backup process is completed, store the backup in antistatic environment at the proper temperature and humidity.
Restore all calling listsTo restore all callings lists from a backup tape:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
Maintenance and Troubleshooting Guide March 2008 49
3. From the Back Up and Restore Menu, type 3 and press enter to select Local backup up/restore calling lists option.
4. Type 4 and press enter to execute Restore all calling lists command.
5. The system will ask you the following "Restore all calling lists - Are you sure?". Type Y for yes and N for no.
6. Choose the backup media type.
7. Follow the onscreen instructions.
Restore a specific calling listYou can restore a single calling list file from tape. This choice is similar to the previous choice except that the file to be restored must appear in the Item List on the right hand side of the menu. This command will overwrite the list of the same name currently on the system.
To restore a specific calling list from tape:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
3. From the Back Up and Restore Menu, type 3 and press enter to select Local backup up/restore calling lists option.
4. Type 5 and press enter to execute Restore a specific calling list command.
5. Type the item number of the calling list on the right of the command menu that needs to be restored and press enter.
6. The system will ask you the following "Restore a specific calling list on item <listname> - Are you sure?". Type Y for yes and N for no.
7. Choose the restore media type.
8. Follow onscreen instructions.
Back up a databaseYou can back up all database data files and database system files, specifically, all files in the directory /opt/oracle/oradata.
50 Maintenance and Troubleshooting Guide March 2008
! Important:Important: Avaya strongly recommends that you execute a database backup when no other
activities (such as dialing) are in progress. During this operation, the control and monitor functions are unavailable. This operation is also time and resource intensive, which can slow system activity.
To back up a database:
1. Locate the DVD drive / tape drive in the system cabinet. Insert a new DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
3. From the Back Up and Restore Menu, type 4 and press enter to select Local backup up/restore database option.
4. Type 3 and press enter to execute Back up a specific calling list command.
5. Type 2 and press enter to select Back up the database option.
6. The system will ask you the following " Back up the database - Are you sure?". Type Y for yes and N for no.
7. Choose the backup media type.
8. Follow the onscreen instructions.
9. After the backup process is completed, store the backup in antistatic environment at the proper temperature and humidity.
Restore a databaseYou can restore database data files and database system files, specifically, all files in the directory /opt/oracle/oradata.
! Important:Important: Avaya strongly recommends that you execute a database restore when no other
activities (such as dialing) are in progress. During this operation, the control and monitor functions are unavailable. This operation is also time and resource intensive, which can slow system activity.
To restore a database:
1. Locate the DVD drive / tape drive in the system cabinet. Insert the backup DVD / DDS tape in the drive.
2. From the Administrator Main Menu, type 3 and press enter to select Back up, restore and verify option.
Maintenance and Troubleshooting Guide March 2008 51
3. From the Back Up and Restore Menu, type 4 and press enter to select Local backup up/restore database option.
4. Type 3 and press enter to execute Restore the database command.
5. The system will ask you the following " Restore the database - Are you sure?". Type Y for yes and N for no.
6. Choose the backup media type.
7. Follow the onscreen instructions.
52 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 53
Error messages and message type
Message Type Error Number
Error Message
GLOB E00500 %s - Caught signal %d (%s)
GLOB E00501 %s - Caught signal %d (%s) and terminated
GLOB E00502 %s - Failed to allocate Memory
GLOB E00503 %s - Pattern error: %s
GLOB E00504 %s - Bad argument
GLOB E00505 %s - Invalid time format
GLOB E00506 %s - Invalid date format
GLOB E00507 %s - Failed to retrieve environmental variable %s
GLOB E00508 %s - Entry %s missing/invalid in master.cfg file
GLOB E00509 %s - Entry %s missing/invalid in %s file
GLOB E00510 %s - Entry %s is incompatible in length
GLOB E00511 %s - Failed to process file %s
GLOB E00512 %s - File name %s too long
GLOB E00513 %s - Invalid file name %s
GLOB E00514 %s - File name %s already exist
GLOB E00515 %s - Failed to open file %s
GLOB E00516 %s - Failed to close file %s
GLOB E00517 %s - Failed to create file %s
GLOB E00518 %s - Failed to read from file %s
GLOB E00519 %s - v_dialer\dialer\src\dbconst\readtape.c %s
GLOB E00520 %s - Failed to lock file %s
GLOB E00521 %s - Failed to unlock file %s
GLOB E00522 %s - Failed to attach to shm, err=%d, id=%d
54 Maintenance and Troubleshooting Guide March 2008
GLOB E00523 %s - Failed to detach from shm, err=%d, id=%d
GLOB E00524 %s - Failed to remove shm, err=%d, id=%d
GLOB E00525 %s - Failed to get msgq, err=%d, id=%d
GLOB E00526 %s - Failed to send msg, err=%d, id=%d
GLOB E00527 %s - Failed to recv msg, err=%d, id=%d
GLOB E00528 %s - Failed to remove msgq, err=%d, id=%d
GLOB E00529 %s - Failed to invoke function %s, err=%d
GLOB E00530 %s - Failed to open calling list %s
GLOB E00531 %s - Failed to read calling list definition %s
GLOB E00532 Field %s not defined in calling list %s
GLOB E00533 Field %s has incorrect length
GLOB E00534 Not a calling list
GLOB E00535 %s - No space on file system
GLOB E00536 %s - Failed to initialize keyboard
GLOB E00537 %s - Failed to initialize screen environment
GLOB E00538 %s - Failed to setup command keys
GLOB E00539 %s - Failed to create %s window
GLOB E00540 %s - Failed to create window pointer
GLOB E00541 %s - Failed to open keys file %s
GLOB E00542 %s - Field %s not defined in calling list %s
GLOB E00543 Field %s not defined in calling list %s (WARNING)
GLOB E00544 %s - Invalid Pattern '%s'
GLOB E00545 %s:fail to send %s to %s
GLOB E00546 Failed to create directory '%s' -- errno %d: %s
GLOB E00547 Non-directory '%s' in directory path '%s'
GLOB E00548 Missing/invalid entry for %s in file %s
GLOB E00549 %s operation failed, file '%s' -- errno %d: %s
GLOB E00550 Invalid entry for %s in file %s near '%s'
GLOB E00551 Assertion failed (expression false), aborting
Maintenance and Troubleshooting Guide March 2008 55
GLOB E00552 Failed to open directory %d
GLOB E00553 File '%s' does not exist
GLOB E00554 %s operation failed
GLOB E00555 %s - %s
GLOB E00556 File '%s' exists, but is not readable by user %s
GLOB E00557 File '%s' exists, but is not writable by user %s
LIBDSI E10000 Exceeded max number (%d) of associate calling lists
LIBDSI E10001 Not an associate List
LIBDSI E10002 Not an associate select file: %s
LIBDSI E10003 Associate list name missing
LIBDSI E10004 Associate list name not in assoc.cfg file
LIBDSI E10005 %s - Creation time for %s is incorrect
LIBDSI E10006 Failed to change master clist: %s
LIBDSI E10007 Invalid logical connector at line %d
LIBDSI E10008 Missing field name or value at line %d
LIBDSI E10009 Group may not begin with no selection
LIBDSI E10010 Gap found between select fields within group
LIBDSI E10011 Field name not found at line %d
LIBDSI E10012 Pattern error at line %d: %s
LIBDSI E10013 can't find service entry in /etc/services, errno=%d
LIBDSI E10014 socket call failed, errno=%d
LIBDSI E10015 Unable to bind to local address, errno=%d
LIBDSI E10016 Unable to setup listen on socket, errno=%d
LIBDSI E10017 Unable to accept connection on socket, errno=%d
LIBDSI E10018 Unable to connect to socket, errno=%d
LIBDSI E10019 Unable to send data to socket %d, errno=%d
LIBDSI E10200 Unequal phone number field lengths in file %s
LIBDSI E10201 Invalid line selection
LIBDSI E10600 Failed to allocate memory
56 Maintenance and Troubleshooting Guide March 2008
LIBDSI E10601 Invalid usage
LIBDSI E10602 Invalid job name
LIBDSI E10603 Failed to open edit file
LIBDSI E10604 No editable line in job file
LIBDSI E10605 Job file in use
LIBDSI E10606 Wrong job for verification editor
LIBDSI E10607 Required field not filled in
LIBDSI E10608 HUNTGRP format error
LIBDSI E10609 No HUNTGRP setting
LIBDSI E10610 No Inbound jobs allowed
LIBDSI E10611 Invalid number of reserve inbound line
LIBDSI E10612 Script label for answer missing/invalid
LIBDSI E10613 Failed to read inbound calling list
LIBDSI E10614 Failed to read associated calling list
LIBDSI E10615 Failed to read inbound screen file
LIBDSI E10616 Failed to read inbound screen map
LIBDSI E10617 Failed to read multiple screen
LIBDSI E10618 Failed to read multiple screen map
LIBDSI E10619 Failed to read associated screen
LIBDSI E10620 Failed to read associated screen map
LIBDSI E10621 Failed to read outbound list
LIBDSI E10622 Failed to read outbound screen
LIBDSI E10623 Failed to read outbound map
LIBDSI E10624 Failed to read calling script
LIBDSI E10625 Failed to read key file
LIBDSI E10626 Failed to match associated field
LIBDSI E10627 Failed to process data transfer field
LIBDSI E10628 Failed to process associated selection
LIBDSI E10629 Selection list not available for use
Maintenance and Troubleshooting Guide March 2008 57
LIBDSI E10630 STATUSFLAG field missing
LIBDSI E10631 CODE field missing
LIBDSI E10632 DTE field missing
LIBDSI E10633 TME field missing
LIBDSI E10634 Invalid start or stop time format
LIBDSI E10635 Invalid Hit Rate
LIBDSI E10636 Invalid Expert Calling Ratio
LIBDSI E10637 Invalid call completion code for Quota Value
LIBDSI E10638 Invalid quota value
LIBDSI E10639 Invalid paired phone count/type
LIBDSI E10640 Invalid number of phone lines
LIBDSI E10641 Odd number of phone lines specified
LIBDSI E10642 Invalid phone type specified
LIBDSI E10643 Failed to initialize call strategy
LIBDSI E10644 Failed to read call strategy
LIBDSI E10645 Failed to verify call strategy
LIBDSI E10646 The specified job already running
LIBDSI E10648 Non-OP completion code specified for Quota setting
LIBDSI E10649 Failed to find linked job file
LIBDSI E10650 Linking between virtual agent jobs and non-virtual jobs is not permitted
LIBDSI E10651 Sales verification job linking is not permitted
LIBDSI E10652 Job linking is not permitted
LIBDSI E10653 Invalid call completion code for TRANSTAT
LIBDSI E10654 Selection list for job not found
LIBDSI E10655 No verification selection list ready for job
LIBDSI E10656 Selection list not created with this calling list
LIBDSI E10657 missing or invalid script label for call
LIBDSI E10658 Failed to open script file for IVR ID
58 Maintenance and Troubleshooting Guide March 2008
LIBDSI E10659 IVR script name not specified; required if IVR ID specified
LIBDSI E10660 Unable to find script name in script file for IVR ID
LIBDSI E10661 remote list use not permitted
LIBDSI E10662 Sales verification or managed dialing must have agents
LIBDSI E10663 Managed dialing is not permitted with sales verification or inbound
LIBDSI E10664 Virtual agents cannot select a specific unit to log in to
LIBDSI E10665 Sales verification is not permitted with unit work lists
LIBDSI E10666 Sales verification is not permitted with inbound
LIBDSI E10667 Selecting unit to log in to is not permitted with inbound-only job
LIBDSI E10800 Not an error
LIBDSI E10801 Not an open file descriptor
LIBDSI E10802 Failed to open file
LIBDSI E10803 Failed to close file
LIBDSI E10804 Failed to lock record
LIBDSI E10805 Failed to unlock record
LIBDSI E10806 Failed to read file header
LIBDSI E10807 Failed to write file header
LIBDSI E10808 Failed to read record
LIBDSI E10809 Failed to write record
LIBDSI E10810 Failed to allocate CLSTAT table
LIBDSI E10811 Failed to get record totals
LIBDSI E10812 Invalid operation code
LIBDSI E10813 Failed to read file dictionary
LIBDSI E10814 Failed to write file dictionary
LIBDSI E10815 Failed to create file
LIBDSI E10816 Failed to access file
LIBDSI E10817 Unconverted to year 2000
Maintenance and Troubleshooting Guide March 2008 59
LIBDSI E10818 Unable to connect to listserver
LIBDSI E10819 XFD overflow (no XFD slots available)
LIBDSI E10820 Socket read error
LIBDSI E10821 Socket write error
LIBDSI E10822 Tag value incorrect - message alignment/framing error
LIBDSI E10823 File is open for reading only
LIBDSI E10824 File is open for writing only
LIBDSI E10850 Unable to open list '%s'
LIBDSI E10851 gethostbyname ('%s') failed
LIBDSI E10852 socket () failed
LIBDSI E10853 connect (conn_fd=%d) failed (is listserver running on host '%s'?)
LIBDSI E10854 _LcCreateXfd () failed
LIBDSI E10855 Write error -- wrote %d != expected %d
LIBDSI E10856 clstat (%d) failed
LIBDSI E10857 clrddict (%d) failed
LIBDSI E10858 getservbyname () failed -- using default LSERVPORT value (%d)
LIBDSI E10859 Bad file descriptor (%d)
LIBDSI E10860 File corruption or record size mismatch detected in calling list %s; fd=%d
LIBDSI E10861 Failed to remove file %s
LIBDSI E10900 Error: Value: <%s> not in master.cfg
LIBDSI E11000 Error: Recall attempt #%d (%s) can't be less than %d seconds
LIBDSI E11001 Recall (%s) attempts can't exceed %d
LIBDSI E11002 Invalid recall code: %s
LIBDSI E11003 Failed to determine max number of phones
LIBDSI E11004 Field value missing
LIBDSI E11005 Gap found between selection criteria lines
60 Maintenance and Troubleshooting Guide March 2008
LIBDSI E11006 Extra ',' found
LIBDSI E11007 Invalid phone: %s
LIBDSI E11008 Invalid field name: %s
LIBDSI E11009 Invalid field value: %s
LIBDSI E11010 Invalid logical connector: %s
LIBDSI E11011 Invalid time zone letter: %c
LIBDSI E11012 Invalid completion code: %s
LIBDSI E11013 Invalid ring count: %s. Must be 1 - %d
LIBDSI E11014 Invalid call detection mode: %s
LIBDSI E11015 Error: Recall attempt #%d (%s) can't be less than %d minutes
LIBDSI E12000 File %s busy, try again later
LIBDSI E12100 Molocale - Unknown language name %s
LIBDSI E12101 Molocale - Failed to set locale %s errno=%d
LIBDSI E12150 PVRS - Failed to initialize %s
LIBDSI E12151 Hash key field is not defined in %s
LIBDSI E12152 No Previous Record
LIBDSI E12153 No More Record
LIBDSI E12154 Failed to Load Record
LIBDSI E12155 Record Currently In Use
LIBDSI E12156 No Record Found
LIBDSI E12200 Attempt to read hidfile without lock
LIBDSI E12201 Username %s exceeds %d characters in length
LIBDSI E12202 %s - Failed to lock file %s, errno(%d)
LIBDSI E12203 %s - Failed to unlock file %s, errno(%d)
LIBDSI E12400 tget returned errno %d raising signal %d
LIBDSI E12600 Calling list %s not in shared memory
LIBDSI E12601 Calling list field count not match
LIBDSI E12800 Failed to find screen %s
Maintenance and Troubleshooting Guide March 2008 61
LIBDSI E13000 IPC - Invalid input argument
LIBDSI E13001 IPC - Invalid ipc entry
LIBDSI E13002 IPC - Invalid ipc name
LIBDSI E13003 IPC - Invalid ipc number %d
LIBDSI E13004 Warning: CFRM message truncated
LIBDSI E13005 Timed out waiting for %s confirmation
LIBDSI E13006 Response message too long!
LIBDSI E13007 IPC - Failed to open opmon message queue
LIBDSI E13008 %s - Failed on semaphore removal, err=%d key=%d
LIBDSI E13009 %s - Failed on semaphore operation, err(%d) key = %d code = %d
LIBDSI E13010 %s - Accessing bad semaphore
LIBDSI E13011 %s - Failed to open semaphore, err(%d)
LIBDSI E13200 Headset value (%s, %d) out of bound
LIBDSI E13201 Headset %d not specified in %s file
LIBDSI E13400 Missing or invalid YES/NO field
LIBDSI E13401 Missing or invalid length
LIBDSI E13402 Missing prefix
LIBDSI E13403 Missing line type
LIBDSI E13404 Missing or invalid num of chars to strip
LIBDSI E13405 Missing prefix
LIBDSI E13406 Missing suffix
LIBDSI E13407 Duplicate ALL phone numbers specification
LIBDSI E13408 Phone number too long
LIBDSI E13409 Dial phone number too long
LIBDSI E13410 Missing std to dial phone number format
LIBDSI E13411 Invalid use of ALL phone numbers specification
LIBDSI E13412 Missing phone numbers
LIBDSI E13600 Report failed, system out of space
62 Maintenance and Troubleshooting Guide March 2008
LIBDSI E13800 Invalid Headset Number (%d, %s)
LIBDSI E13801 Headset port no. %d out of range (1-%d)
LIBDSI E13802 Normal trunk port no. %d out of range (1-%d)
LIBDSI E13803 Invalid normal trunk equip no %d
LIBDSI E13804 Invalid normal trunk group no %d
LIBDSI E13805 Invalid transfer trunk group no %d
LIBDSI E13806 Failed to determine switch type
LIBDSI E13807 Failed to process line (%s)
LIBDSI E14000 Invalid timezone from GMT
LIBDSI E14001 Invalid time format at line %d in file %s
LIBDSI E14200 Missing delay specification
LIBDSI E14201 Missing or invalid low range
LIBDSI E14202 Invalid range character
LIBDSI E14203 Invalid high range
LIBDSI E14204 Invalid min delay
LIBDSI E14205 Missing completion code
LIBDSI E14206 Invalid completion code
LIBDSI E14207 Range does not come after previous range
LIBDSI E14208 Missing limit
LIBDSI E14209 Missing or invalid YES/NO field
LIBDSI E14210 Missing time zone specification for country %d
LIBDSI E14211 Missing or invalid time zone designation
LIBDSI E14212 Missing reject phone number pattern
LIBDSI E14213 Invalid reject phone number pattern
LIBDSI E14214 Duplicate country specified
LIBDSI E14215 Invalid answer delay time
LIBDSI E14216 Invalid DAA type
LIBDSI E14217 Invalid VM2 locale code
LIBDSI E14218 Invalid phone number length
Maintenance and Troubleshooting Guide March 2008 63
LIBDSI E14219 Rejected phone number (L%d)
LIBDSI E14220 Cannot find time zone for phone number
LIBDSI E14221 Invalid offhook retry delay
LIBDSI E14222 Invalid wait limit
LIBDSI E14400 Unknown select file %s
LIBDSI E14401 Unknown call completion code %s
LIBDSI E14402 No call completion codes selected
LIBDSI E14404 Missing field name or value at selection entry %d
LIBDSI E14405 Group may not begin with no selection
LIBDSI E14406 Gap found between select fields within group
LIBDSI E14407 Field name not found at selection entry %d
LIBDSI E14408 Pattern error at selection entry %d: %s
LIBDSI E14409 Unit Control - Invalid memory slot position
LIBDSI E14410 Unit Control - Failed to attach to data segment
LIBTCAP E14800 Termcap entry larger than buffer size
LIBTCAP E14801 Invalid termcap entry format
LIBTCAP E14802 'tc' entries exceed maximum allowed
LIBTCAP E14900 Terminal type %s not found in %s
LIBTCAP E14901 Default terminal type vt100 not found in %s
LIBUI E15200 No summary information available
LIBUI E15201 Invalid field type
LIBUI E15202 Invalid value, Must be %s
LIBUI E15203 Sorry, command not allowed inside editor
LIBUI E15204 %s - Menubar '%s' already exists.
LIBUI E15205 %s - Menubar '%s' not found.
LIBDSI E15400 %s:new_bsrch - Memory allocation (%d bytes) failed, loc %d
LIBDSI E15401 %s:new_bsrch - Bad value in new_bsrch (cl_name=%s cl_fd=%d, cl_keyname=%s init_type=%c pgmname=%s log_type=%d log_file=%s)
64 Maintenance and Troubleshooting Guide March 2008
LIBDSI E15402 %s:new_bsrch - List recno %d locked-skipping;
LIBDSI E15403 %s:new_bsrch - List recno %d locked-aborting;
LIBDSI E15404 %s:new_bsrch - Bad calling list record parameter(s): keylen=%d reclen=%d nrecs=%d
LIBDSI E15420 %s:new_hsrch - Memory allocation (%d bytes) failed, loc %d
LIBDSI E15421 %s:new_hsrch - Unable to open hash file for %s
LIBDSI E15422 %s:new_hsrch - Missing key_field entry in hash file %s
LIBDSI E15424 %s:new_hsrch - Bad calling list record parameter(s): keylen=%d reclen=%d
LIBUTIL E16000 Missing or invalid country code
LIBUTIL E16100 Line too long
LIBUTIL E16101 Missing label
LIBUTIL E16102 Invalid label on line
LIBUTIL E16400 Range not properly nested
LIBUTIL E16401 Prefix falls on a range's border
LIBUTIL E16402 Range border falls on a prefix
LIBUTIL E16403 Range straddles previous range
LIBUTIL E16404 Prefix has the same value as a shorter prefix
LIBUTIL E16405 Same prefix is already specified
LIBUTIL E16406 Prefix has the same value as a longer prefix
LIBUTIL E16407 Missing prefix
LIBUTIL E16408 Invalid character in prefix
LIBUTIL E16409 Low range has fewer digits than high
LIBUTIL E16410 Range borders are out of order
LIBUTIL E16411 Bad argument in ptree
LIBUTIL E16500 Hash_get (%x, %s, %d) failed due to too many probes
LIBUTIL E16501 Requested size %d is too large -- Max hash table slots currently supported is %d
LIBUTIL E16600 Pattern '%s': Expected numerical lval, found '%s'
Maintenance and Troubleshooting Guide March 2008 65
LIBUTIL E16601 Pattern '%s': Expected numerical rval, found '%s'
LIBUTIL E16602 Pattern '%s': lval > rval (%g > %g)
LIBUTIL E16603 Pattern '%s': Expected hyphen, list separator, or end of pattern; found '%c'
LIBUTIL E16604 Pattern '%s': Unexpected end of numerical comparison
LIBUTIL E16605 Pattern '%s': Pattern too large
LIBUTIL E16606 Pattern '%s': Bad or missing DATEFORM parameter in master.cfg
LIBUTIL E16607 Pattern '%s': Bad format for date comparison
LIBUTIL E16608 Pattern '%s': Bad format for time comparison
LIBUTIL E16609 Pattern '%s': Bad format for relative date comparison
LIBUTIL E16610 Pattern '%s': Undefined backslashed character '%c'
LIBUTIL E16611 Pattern '%s': Unknown pattern type '%c' specified
LIBUTIL E16612 Pattern '%s': Failed to compile - use explicit pattern syntax for more details
LIBUTIL E16620 Unable to compare - previous pattern failed compilation - '%s'
LIBUTIL E16621 No compiled pattern to compare against for string '%s'
LIBUTIL E16800 Undefined func call: %s
LIBUTIL E16900 EXECPROG:Unexpected exit from waitpid() returning -1:errno=%d:pid=%d,child=%d
LIBUTIL E16901 EXECPROG:not returning from child process:pid=%d,child=%d
LIBUTIL E16902 EXECPROG:Exit(%d) wait(pid=%d)
LIBUTIL E16903 EXECPROG:Signal STOPPED wait(%d)
LIBUTIL E16904 EXECPROG:Sig_Exit:errno=%d:stat=0x%X:sig=%d:pid=%d,child=%d
LIBUTIL E16905 EXECPROG:Unexpected exit:errno=%d:stat_loc=0x%X:ret=%d:pid=%d,child=%d
LIBUTIL E16906 EXECPROG:Killed Child(%d):%s:
66 Maintenance and Troubleshooting Guide March 2008
LIBUTIL E16907 EXECPROG:errno=%d:stat_loc=0x%X:ret=%d:pid=%d,child=%d
LIBUTIL E16908 PID(%d)Relaying signal=%d to child_pid=%d
LIBUTIL E16909 PID(%d)Ignoring signal=%d
LIBUTIL E16910 PID(%d)Activating Default Signal Handler
LIBUTIL E16911 PID(%d)Returning to exec_prog() Routine
LIBUTIL E16912 PID(%d)Calling Primary Signal Handler
LIBUTIL E17000 Error: system message '%s' not found
LIBUTIL E17001 Error: unable to open account file '%s'
LIBUTIL E17002 Error: unknown user '%s' specified.
LIBUTIL E17003 Error: unknown group '%s' specified.
LIBUTIL E17004 Error: chown ('%s', %d, %d) failed.
LIBUTIL E17005 Error: malloc ('%s') failed.
LIBUTIL E17100 getconfig: File '%s' is empty
LIBUTIL E17101 getconfig: Couldn't open file '%s'
LIBSWIF E18200 DISABLE INBOUND FAILED: (%d)%s
LIBSWIF E18201 ENABLE INBOUND FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18202 PORTER%d: switch out of sync
LIBSWIF E18203 Download of voice prompt file [%s] failed
LIBSWIF E18204 CALL FAILED ON %d: %s
LIBSWIF E18205 ORULE OVERRIDE DISABLE FAILED: %s
LIBSWIF E18206 HANGUP FAILED FOR %d: %s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18207 HANGUP FAILED: EQUIP= %d
LIBSWIF E18208 TRNSFR Transfer trunks not configured
LIBSWIF E18209 TRNSFR No transfer trunks available
LIBSWIF E18210 TRNSFR Transfer dial failed
LIBSWIF E18211 TRNSFR Transfer Failed
LIBSWIF E18212 TRNSFR Failed to put line on hold
Maintenance and Troubleshooting Guide March 2008 67
LIBSWIF E18213 RESPONSE FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18214 DOWNLOAD FAILED: file=%s, %s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18215 TRANSFER DIAL FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18216 TRANSFER CONFERENCE FAILED: (%d)%s, ns=%x
LIBSWIF E18217 Porter %d failed to busy-out line
LIBSWIF E18218 Porter %d abandoned inbound call
LIBSWIF E18219 DELIVER FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18220 POLL_MSG FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18221 OFFHOOK FAILED FOR %d: %s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18222 HOOKFLASH FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18223 STUTTERED DIALTONE TEST FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18224 DIAL FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18225 TRANSFER OFFHOOK FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18226 CAMPON FAILED equip_no=%d: %s, ns=%x, rsb=%x, cause_IE=%x, status=%d
LIBSWIF E18227 POLL_EVENT FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E18228 TRNSFR Failed to find job specified holdmsg number in voicemsg.cfg
LIBSWIF E18400 swid_process_report: bad ns = 0x%04x
LIBSWIF E18401 swid_process_report: bad 0x%x reply
LIBSWIF E18402 swid_process_report: bad <port> in 0x%x reply
LIBSWIF E18403 swid_process_report: 0x%x reply <control_port> out of range.
68 Maintenance and Troubleshooting Guide March 2008
LIBSWIF E18404 swid_process_report: 0x69 reply on inactive virtual port (0x%04x).
LIBSWIF E18405 swid_process_report: 0x69 reply <outgoing_port=0x%03x> out of range.
LIBSWIF E18406 swid_report_72(reset): bad NSB.
LIBSWIF E18407 swid_process_report: bad port = %d(0x%03x) in 0xDA reply
LIBSWIF E18408 swid_process_report: Ignored 0x%x report on port=%d(0x%03x),supcode=0x%04x
LIBSWIF E18409 swid_process_report: unknown/unexpected change
LIBSWIF E18410 (%d)/event %s(%d) on port (0x%03x).
LIBSWIF E18411 swid_process_report: bad port %d(0x%03x) in 0xDB reply
LIBSWIF E18412 change=%x
LIBSWIF E18413 swid_process_report: <port> (0x%03x) in 0xDD reply not enabled for inbound
LIBSWIF E18414 swid_process_report: 0x49 reply on inactive virtual port (0x%04x).
LIBSWIF E18415 swid_process_report: 0x49 reply <outgoing_port=0x%03x> out of range.
LIBSWIF E18416 swid_process_report: bad port = %d(0x%03x) in 0xEA reply
LIBSWIF E19000 '%s' not in /etc/hosts!
LIBSWIF E19001 swif: '%s' cannot create socket!
LIBSWIF E19002 swif: cannot connect to ethernet switch port '%s:%d',(%d)
LIBSWIF E19003 swif: cannot set socket option SO_KEEPALIVE, err(%d)
LIBSWIF E19004 Failed to read packet header (%d,%d)
LIBSWIF E19005 Failed to read packet body (%d,%d)
LIBSWIF E19006 ethernet receive buffer too small
LIBSWIF E19007 swif: listener cannot swic_init_client()
LIBSWIF E19200 Unable to save switch log history
LIBSWIF E19201 Log event from %s line %d is being throttled.
Maintenance and Troubleshooting Guide March 2008 69
LIBSWIF E19400 Unable to initialize switch channel, swif return=[%d]
LIBSWIF E19401 Failed to reset switch channel
LIBSWIF E19402 %s TONE DOWNLOAD FAILED, %s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E19403 GREETING PROMPT DOWNLOAD FAILED, %s, ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E19404 Failed to reset switch, swif return=[%d],ns=%x, rsb=%x, cause_IE=%x
LIBSWIF E19405 ZIP TONE FAILED, %s, ns=%x, rsb=%x, cause_IE=%x, equip=%d
LIBSWIF E19406 CONNECT RESPONSE: %s, ns=%x, rsb=%x, cause_IE=%x, equip1:%d, equip2:%d
LIBSWIF E19407 DISCONNECT RESPONSE: %s, ns=%x, rsb=%x, cause_IE=%x, equip:%d,
LIBSWIF E19408 Invalid prompt index:%d
LIBSWIF E19600 unexpected EOF/incomplete comment
LIBSWIF E19601 non-ASCII character.
LIBSWIF E19602 Error reading exercise script '%%s':
LIBSWIF E19603 line %%d:
LIBSWIF E19604 event table full
LIBSWIF E19605 not a SWIF function name
LIBSWIF E19606 expecting a time value, digits only, enclosed in ()
LIBSWIF E19607 expecting closing paren
LIBSWIF E19608 expecting SWIF event name
LIBSWIF E19609 too many exercise script errors -- aborting!
CALLSEL E25000 Recall field name or value missing
CALLSEL E25001 Recall field name not found
CALLSEL E25002 Recall pattern error: %s
CALLSEL E25003 %s - Failed to locate strategy files
CALLSEL E25004 Unknown time zone designator %c
CALLSEL E25005 No time zones selected
CALLSEL E25007 Missing field name or value at recall entry %d
70 Maintenance and Troubleshooting Guide March 2008
CALLSEL E25008 Group may not begin with no selection
CALLSEL E25009 Gap found between select fields within group
CALLSEL E25010 Field name not found at recall entry %d
CALLSEL E25011 Pattern error at recall entry %d: %s
CALLSEL E25012 Sort direction is invalid
CALLSEL E25013 Sort field name not found
CALLSEL E25014 Unit work list Key field name missing
CALLSEL E25015 Unit work list Key field name not found
CALLSEL E25016 Strategy file name missing
CALLSEL E25017 Strategy file name not found
CALLSEL E25018 Unable to read strategy file
CALLSEL E25019 %s - Unable to initialize strategy table
CALLSEL E25020 %s - Time zoning of phone numbers not done on calling list
CALLSEL E25021 %s - Master calling list error
CALLSEL E25022 %s - Unable to get callsel number
CALLSEL E25023 %s - List selection aborted
CALLSEL E25024 %s - Calling List %s is not Time Zoned
CALLSEL E25025 %s - %s field not defined or incorrect length
CALLSEL E25026 Callsel verification failed. Please use change option
CALLSEL E25027 Improper Usage
CALLSEL E25028 Special time zone + is not available
CALLSEL E25029 Report field name not found
CALLSEL E25030 You must specify at least one field
CALLSEL E25031 Timeout: failed to identify status of the Index Processing within %d seconds
CALLSEL E25032 Failed to start asynchronous Index Processing sub-process
CALLSEL E25501 Callsel terminated by signal = %d
CALLSEL E25502 Callsel exited with status of %o (octal)
Maintenance and Troubleshooting Guide March 2008 71
CALLSEL E25503 Couldn't open file %s
CALLSEL E25504 Failed to read file %s
CALLSEL E25505 callconn:fail to send zALTQUE msg
SEVMONT E27000 Invalid input parameter(s)
SEVMONT E27100 Failed to process the method
SEVMONT E27200 Failed to open the file
SEVMONT E27300 Failed to activate the service
CORE E28000 Failed to initialize switcher
CORE E28100 Unable to attach to data segment
CORE E28101 invalid channel number %s
CORE E28102 couldn't open switch channel
CORE E28103 *** no active channel !!
CORE E28104 'memory' is not implemented
CORE E28105 cannot attach to ipc queue, retval=%d, errno=%d
CORE E28106 equipment number type not found
CORE E28107 no seize on ISDN ports
CORE E28108 no drop on ISDN ports
CORE E28109 UNRECOGNIZED COMMAND! %s
CORE E28200 %s - Job %s %s already exists
CORE E28201 %s - Job %s %s does not exist
CORE E28202 %s - Exceeded shared segment limit
CORE E28203 %s - No phone calls in wait but wait count disagrees
CORE E28204 %s (test_inbound_service) - Conn_op_line failed
CORE E28205 %s - Invalid slot number(%d) passed
CORE E28206 %s - Invalid agent number %d
CORE E28207 %s - Invalid call trans type %c
CORE E28208 No oper_name ('%s') or oper_jobnum (%d), cannot archive
CORE E28209 No oper_name ('%s') or oper_jobnum (%d), cannot restore
72 Maintenance and Troubleshooting Guide March 2008
CORE E28210 No oper_name ('%s'), cannot restore
CORE E28211 No jobname ('%s') or jobnum (%d), cannot archive
CORE E28300 Unable to create a list of extensions
CORE E28301 add_agent: Unable to insert agent
CORE E28302 add_agent: entered a duplicate value
CORE E28303 add_agent: Error getting current pointer
CORE E28304 agent_recall: Unable to insert recall
CORE E28305 recall_rmp - Exit since AGENTOWNRECALL is off
CORE E28306 recall_rmp - Unable to create a list of agent
CORE E28307 recall_rmp - Unable to create a list of recall
CORE E28308 recall_rmp - unknown message received '%s'
CORE E28309 Failed to setup ipc for agent %s
CORE E28310 recall_rmp - agent %s not available
CORE E28400 Sales verification or managed dialing must have agents
CORE E28401 Managed dialing is not permitted with sales verification or inbound
CORE E28402 Virtual agents cannot select a specific unit to log in to
CORE E28404 Sales verification is not permitted with unit work lists
CORE E28405 Sales verification is not permitted with inbound
CORE E28406 Inbound with unshared account ownership is not permitted
CORE E28407 Alternate selection %s is not permitted with unit work lists
CORE E28408 %s - Failed to get job number
CORE E28409 Job startup failed in job configuration
CORE E28410 Job setup incomplete, Aborting %s
CORE E28411 %s - Unknown message: %s, %s, %s
CORE E28412 %s - Not an inbound capable system
CORE E28413 %s - Failed to setup hunt group
CORE E28414 %s - Invalid hunt group
Maintenance and Troubleshooting Guide March 2008 73
CORE E28415 %s - Failed to receive a job info position
CORE E28416 %s - FATAL_ERROR: %s
CORE E28417 %s - Record length greater than %d
CORE E28418 %s - Failed on verifying assoc. list
CORE E28419 %s - Failed on reading assoc. list
CORE E28420 %s - Master calling list error
CORE E28421 %s - Invalid strategy: %s
CORE E28422 %s - Failed to table strategy file: %s
CORE E28423 %s - Index file not created with calling list %s
CORE E28424 %s - Exceeded record slots available,PORTCOEF may be low
CORE E28425 %s(%s) - Record number returned invalid %d
CORE E28426 %s(%s) - Record number returned wrong %d, job number %d
CORE E28427 Failed to attach to semaphore
CORE E28428 Failed to read selection criteria file:%s
CORE E28429 %s - Call cancel is not permitted
CORE E28430 Job linking is not permitted
CORE E28431 ERROR: EDTFILE not specified in job file %s
CORE E28432 ERROR: Failed to fork job %s (error=%d)
CORE E28433 ERROR: Failed to exec job %s
CORE E28434 ERROR: Failed to invoke wait for job %s (error=%d)
CORE E28435 Next job %s started
CORE E28436 Next job %s error: %s
CORE E28437 Next job %s terminated by signal %d
CORE E28438 Next job %s stopped by signal %d
CORE E28439 ERROR: Next job %s already starting up.
CORE E28440 Caller(launch_posttrans) - Failed to invoke function fork, err=%d
CORE E28441 Caller(launch_posttrans) - Failed to invoke function rtprio, err=%d
74 Maintenance and Troubleshooting Guide March 2008
CORE E28442 Caller(launch_posttrans) - Failed to invoke function pipe, err=%d
CORE E28443 %s - Failed to create calling script %s
CORE E28444 Caller - Failed to get port matching label %s N%s
CORE E28445 %s - Failed to terminate proc %d for Agent %s
CORE E28446 caller:fail to send %s to %s
CORE E28447 caller:fail to get shadowjobname
CORE E28448 Job(%s) '%s' sent to a non shadow job
CORE E28449 Caller - PostTrans:Failed to exec prog '%s'
CORE E28450 Caller - %s (R%d) (N%s)
CORE E28451 Job(%s):%s: no available line
CORE E28452 Job(%s):%s: no available record slot
CORE E28453 Job(%s):%s:No recall found in queue
CORE E28454 Job(%s):%s:Invalid phone for this recall, rec_slot=%d
CORE E28455 Job(%s):%s:Same record (%d)is opened
CORE E28456 Job(%s):%s:Record %d is locked
CORE E28457 Job(%s):%s:Failed to read record %d
CORE E28458 Job(%s)::Failed to get phone number:%s
CORE E28459 Job(%s)!get_ft_sort_key!clread error rec_num=%d
CORE E28460 Job(%s):PostTrans:Failed to write pipe, recnum = %d, errno = %d
CORE E28461 Listops(pvrs_record_load) - Record number transferred is bad (%d)
CORE E28462 Preview Empty Record with Multi Units is not allowed.
CORE E28463 Caller - RTSTATS is YES but failed to get operstats_base and/or job_stats_base
CORE E28464 Invalid name (%s) for IVR pool job
CORE E28465 Data process label '%s' for job '%s' missing/invalid
CORE E28600 %s - Invalid port number assigned
CORE E28601 Porter %d - Line inoperable
Maintenance and Troubleshooting Guide March 2008 75
CORE E28602 %s - Failed to setup input IPC.
CORE E28603 %s - Failed to setup conn_mgr IPC.
CORE E28604 Failed on inbound list def. %s
CORE E28605 Failed on outbound list def. %s
CORE E28606 No extension number for the IVR to dial
CORE E28607 No ring command for IVR to run an application
CORE E28608 HOOKIVR: No dial tone from PBX
CORE E28609 %s - Preview failed to find agent %s
CORE E28610 %s - Mdial failed to find agent %s
CORE E28611 Not allowed in wait
CORE E28612 Request out of sequence
CORE E28613 Missing preview
CORE E28614 Second transaction
CORE E28615 No text in script
LIBDSI E28616 Script missing label %s
CORE E28617 Op keys missing label %s
CORE E28618 Job - Data script %s label missing
CORE E28619 Job - Inbound script label %s missing/invalid
GLOB E28620 Job - Outbound script label for call %s missing/invalid
CORE E28621 Failed to set DAA type:
CORE E28622 Failed to set country code:
CORE E28623 Porter %d failed to busy-out line
CORE E28624 Porter %d abandoned inbound call
CORE E28625 Failed to set DAA type: %d, Porter%d, %d
CORE E28626 Porter %d: Line Fail:
CORE E28627 %s - Invalid line class %c
CORE E28628 Transfer failed, try again later
CORE E28629 No agent available, try again later
CORE E28630 NO DIAL TONE
76 Maintenance and Troubleshooting Guide March 2008
CORE E28631 M %d > MAX
CORE E28632 M %d < MIN
CORE E28633 Porter - bld_dspmesg:message too long for internal buffer
GLOB E28634 Job - Transfer Wait Queue script label %s missing/invalid
CORE E28800 Recall can't be less than %d minutes
CORE E28801 Record is busy
CORE E28802 Recall not allowed for inbound call
CORE E28803 Transfer setup failed
CORE E28804 Job %s not running
CORE E28805 Job %s not ready - Log on later
CORE E28806 %s - Failed to find job name %s in data seg
CORE E28807 Agent number (%d) invalid
CORE E28808 Headset (%s) not specified in %s file
CORE E28809 %s not specified in switch.cfg file
CORE E28810 Duplicate headset ID (%d) already in use by agent %s
CORE E28811 Duplicate headset ID (%d) already in use
CORE E28812 Agent %s logged in Already - Access Denied
CORE E28813 Maximum %s agent limit reached
CORE E28814 Managed agents are not permitted on this job
CORE E28815 Sales verification with unit work lists is not permitted
CORE E28816 Inbound agents only permitted
CORE E28817 Outbound agents only permitted
CORE E28818 Outbound or Managed agents only permitted
CORE E28819 Only outbound agents permitted by sales verification
CORE E28820 Unit value not found, or unavailable
CORE E28821 Cannot be DONE from alternate screen
CORE E28822 Line not released
Maintenance and Troubleshooting Guide March 2008 77
CORE E28823 Failed to save record
CORE E28824 Changes to record not saved
CORE E28825 Record not found
CORE E28826 Record is no longer available
CORE E28827 Failed to unlock record
CORE E28828 Unknown screen type
CORE E28829 Field entry is required
CORE E28830 Field value not in acceptable list
CORE E28831 Field has non-numeric value
CORE E28832 %s doesn't match %s format
CORE E28833 Invalid month in date
CORE E28834 Invalid year in date
CORE E28835 Invalid day in date
CORE E28836 Invalid format character found
CORE E28837 Invalid hour in time
CORE E28838 Invalid minute in time
CORE E28839 Invalid second in time
CORE E28840 Time is not in correct format
CORE E28841 Invalid phone
CORE E28842 Invalid phonestat - %c
CORE E28843 Invalid phone number - %s
CORE E28844 No REL_DIST setting
CORE E28845 No REL_TME setting
CORE E28846 No DONE_TME setting
CORE E28847 Date is before the current date
CORE E28848 Recall time and date outside timezone
CORE E28849 %s - Record's timezone is unknown
CORE E28850 ERROR: Cannot open channel to operator monitor process
78 Maintenance and Troubleshooting Guide March 2008
CORE E28851 ERROR: Operator monitor process does not respond
CORE E28852 ERROR: HEADSET IS NOT ACTIVE
CORE E28853 Error sending digits to switch
CORE E28854 DIALDIGIT Customer Hangup(%d)
CORE E28855 DIALDIGIT Dial Error=%d
CORE E28856 ERROR: Invalid response from operator monitor process
CORE E28857 Feature only available for DIGITAL switch
CORE E28858 %s - Exceeded operator slots available,MAXOPS is low
CORE E28859 %s(%s) - Operator number returned invalid %d
CORE E28860 %s(%s) - Operator number returned wrong %d, job number %d
CORE E28861 Operator slot semaphore not available
CORE E28862 FATAL ERROR ON SELECT - %d
CORE E28863 ERROR - Unknown file descriptor
CORE E28864 Unknown IPC message - %s
CORE E28865 Unknown Command message - %s
CORE E28866 Telephone line not available
CORE E28867 Telephone line not offhook
CORE E28868 Callbacks are not permitted on inbound calls
CORE E28869 Headset volume must be in the range of 1 to 8
CORE E28870 Reserve headset id request pending
CORE E28871 Invalid headset id - %s, %s
CORE E28872 Headset already connected
CORE E28873 Headset ID not reserved nor validated
CORE E28874 Connect headset request pending
CORE E28875 No headset connect request pending
CORE E28876 Headset not connected
CORE E28877 Disconnect headset request pending
Maintenance and Troubleshooting Guide March 2008 79
CORE E28878 No headset disconnect request pending
CORE E28879 Headset not disconnected
CORE E28880 Headset connection broken
CORE E28881 Headset connection re-connected
CORE E28882 Already available for work - Cannot change class
CORE E28883 Invalid work class
CORE E28884 Not attached to data shared memory
CORE E28885 Not attached to a job
CORE E28886 Unit work lists are not permitted on this job
CORE E28887 Already available for work - Cannot change unit id
CORE E28888 Unit id not found
CORE E28889 Attached to a job already - Must detach first
CORE E28890 Failure to open job %s resource file
CORE E28891 Must specify INBOUND or OUTBOUND operation
CORE E28892 No inbound calling list fields available
CORE E28893 No outbound calling list fields available
CORE E28894 Field name not found
CORE E28895 Already available for work
CORE E28896 Headset must be active
CORE E28897 Available for work request pending
CORE E28898 Job not available
CORE E28899 No available for work request pending
CORE E28900 Wrong message id received - %s
CORE E28901 Not available for work
CORE E28902 Already on work item
CORE E28903 Already set ready for next work item
CORE E28904 Request for no further work pending
CORE E28905 Request to transfer to another job is active
CORE E28906 Not ready for next work item
80 Maintenance and Troubleshooting Guide March 2008
CORE E28907 Not a managed dialing job
CORE E28908 Not on work item
CORE E28909 Managed call already complete
CORE E28910 Managed call cancelled or complete
CORE E28911 Managed call cancelled
CORE E28912 Data record not available for update
CORE E28913 No job attached
CORE E28914 Still available for work on the job
CORE E28915 Not logged off job yet
CORE E28916 Job attached - Must detach first
CORE E28917 No job attached
CORE E28918 Not avail for work on the job
CORE E28919 Not currently assigned to a work item
CORE E28920 Headset ID not found in reserved list - %s
CORE E28921 FATAL ERROR ABORTING
CORE E28922 No reserve headset id request pending
CORE E28923 Headset ID - %s already reserved
CORE E28924 Must sign on system first
CORE E28925 Already signed on the system
CORE E28926 Invalid sign on
CORE E28927 Agent - Unable to open command input socket - errno:%d
CORE E28928 Agent - Unable to find agent service entry in /etc/services
CORE E28929 Agent - Unable to bind to local address - errno:%d
CORE E28930 Agent - Unable to setup listen on socket - errno:%d
CORE E28931 Agent - Fork of process failed - errno:%d
CORE E28932 Agent - Accept socket connection call failed - errno:%d
CORE E28933 Agent - Read error on client command socket - count:%d, errno:%d
Maintenance and Troubleshooting Guide March 2008 81
CORE E28934 Agent - Send error on client command socket - errno:%d
CORE E28935 Agent - Parent process exiting
CORE E28936 Agent - Setting of linger failed - errno:%d
CORE E28937 %s agent is not allowed
CORE E28938 Invalid phone type
CORE E28940 Operator - data_synced timeout, data may not be updated
CORE E28942 Job %s is not available
CORE E28943 Invalid key
CORE E28944 COLONS(:) NOT ALLOWED IN PHONE FIELD
CORE E28945 Managed agents only permitted
CORE E28946 Agent not acquired yet
CORE E28947 Invalid call completion code %s
CORE E28948 Jobmon found incorrect PID %d when releasing opslot %d
CORE E28949 Unable to mark as DO NOT CALL
CORE E28950 Extension not in database
CORE E28951 Extension in use
CORE E28952 Cannot add agent
CORE E28953 Acd_ext file read failed
CORE E28954 Duplicate login - please try again
CORE E28955 DNC cannot find key field %s
CORE E28956 ACD Login Error
CORE E28957 Unable to mark other calling lists
CORE E28958 Do Not Call group '%s' not defined
CORE E28959 Invalid Agent Type
CORE E28960 HASH key %s not defined in calling list %s
CORE E28961 Invalid Jobname
CORE E28962 ERROR - Unknown file descriptor
82 Maintenance and Troubleshooting Guide March 2008
CORE E28963 ZONEPHONE%d field not set
CORE E28964 Agent phone is busy. Release phone line before proceeding.
CORE E28965 Softdialer link is down. Please wait until the link is up.
CORE E28966 Invalid headset ID
CORE E28967 Agent is not allowed to logoff
CORE E28968 Failed to register with dispatcher
CORE E28969 Operator - init_op_cntrl() invoked with NULL curr_op_ptr
CORE E28970 Error queuing jobname data in list_running_jobs
CORE E28971 Operator - cannot access job resource file
CORE E28972 Operator - Timed out while waiting for job resouce file
CORE E28973 Operator - Cannot setup screen '%s'.
CORE E28974 Operator - cannot read screen map - %s:%s
CORE E28975 Cannot search when previewing a recall
CORE E28976 Cannot dial from deleted record
CORE E28977 Operator - Failed to initialize signal %s(%d)
CORE E28978 Operator - Failed to ignore signal %s(%d)
CORE E28979 Operator - Failed to enable auto release SIGUSR1 handler
CORE E28980 Operator - Failed to disable auto release SIGUSR1 handler
CORE E28981 Invalid format for %s for job %s
CORE E28982 Managed call cannot be cancelled
CORE E28983 AGTNoFurtherWork is already in progress
CORE E28984 Agent is being released to ACD inbound
CORE E29000 Managed dialing capable jobs only
CORE E29001 Jobmon - Failed on startup
CORE E29002 Jobmon - Failed to Setup Windows
CORE E29006 Job '%s' not running
CORE E29007 Job not ready, waiting %d seconds...
Maintenance and Troubleshooting Guide March 2008 83
CORE E29008 Job not Ready - Logon later
CORE E29009 Outbound capable jobs only
CORE E29010 Inbound capable jobs only
CORE E29011 Not a multi-unit job
CORE E29012 May only monitor Inbound
CORE E29013 Invalid number entered
CORE E29014 Monitoring of phone line disabled
CORE E29015 Monitoring of agent disabled
CORE E29016 Invalid port for monitoring agents
CORE E29017 Agent being monitored
CORE E29018 No jobs currently running.
CORE E29019 Error multiple job entrys in SHM
CORE E29020 No agents having a record available
CORE E29021 Record no longer available
CORE E29022 No units currently available
CORE E29023 No agents available to be killed
CORE E29024 Invalid entry, no changes saved.
CORE E29025 No other jobs currently running.
CORE E29026 No agents currently available.
CORE E29027 Agent transfer currently being processed.
CORE E29028 Phone line allocation currently being processed.
CORE E29029 No jobs currently linked.
CORE E29030 No jobs available for selection.
CORE E29031 Link Job '%s' already starting up.
CORE E29032 No phone lines currently acquired
CORE E29033 No request of phone lines currently pending
CORE E29034 No phone lines of type %s acquired
CORE E29035 Job linking capable jobs only
CORE E29036 Invalid system terminal.
84 Maintenance and Troubleshooting Guide March 2008
CORE E29037 WARNING!!!
CORE E29038 May not monitor op/lines
CORE E29039 Duplicate HEADSET value.
CORE E29040 Illegal W, Q or U rate setting
CORE E29041 Illegal Hit Rate setting
CORE E29042 Allow sending 75 characters
CORE E29043 jobmon: failed to send %s to %s
CORE E29044 Wrong type %s of message for job_strter
CORE E29045 Invalid data from system for get_iicb_status
CORE E29046 Invalid response for list_domain
CORE E29047 Invalid control method
CORE E29048 Invalid response for list_group
CORE E29049 Invalid response for get_group_stats
CORE E29050 Resynch agents is not allowed in the current state
CORE E29051 Unable to create a list of extensions
CORE E29052 Unable to add extension to list!
CORE E29053 Unable to insert extension
CORE E29054 Entered a duplicate value
CORE E29055 Error getting current pointer
CORE E29056 No operator to monitor
CORE E29057 Jobmon: Release code %d has count of %d
CORE E29150 %s:failed to %s
CORE E29151 Failed to initialize signals
CORE E29152 Failed to set SIGALRM handler
CORE E29153 BEEPER:unknown message %s
CORE E29154 Beeper - INTERVAL_ZIPTONE is not set in master.cfg
CORE E29200 %s - Failed to send msg[%s] on channel %d
CORE E29201 %s - Failed to %s data segment
Maintenance and Troubleshooting Guide March 2008 85
CORE E29202 %s - Failed to %s unit segment
CORE E29203 %s - Failed to attach data segment
CORE E29204 %s - Failed to create data segment
CORE E29205 %s - Failed to create unit segment
CORE E29206 %s - Failed to attach unit segment
CORE E29207 Invalid number entered
CORE E29208 %s - Failed to open channel %d
CORE E29210 %s - Failed to erase voice message %s
CORE E29212 %s - Failed to erase all messages
CORE E29213 %s - MSGNO parameter too big
CORE E29214 %s - Too many messages to load
CORE E29400 Unable to find base file for %s
CORE E29500 ao_recall: failed to send %s
CORE E29501 ao_recall: callsel for %s failed
CORE E29502 ao_recall - cannot retrieve selection file from '%s'
CORE E29503 ao_recall - no strategy file in selection file '%s'
CORE E29505 Error queuing timeout data in add_timeout
CORE E29600 Unable to attach to data segment
CORE E29601 HUNTGRP set incorrectly
CORE E29602 Login code not defined for line %s
CORE E29603 Could not open channel #%d
CORE E29604 No login dial tone on line #%d
CORE E29605 No dial tone on line #%d
CORE E29606 Unable to dial %s
CORE E29607 Error with line %d
CORE E29608 ACD_login : Signal Abort:%s(%d)
CORE E29700 Invalid Selection Number
CORE E29701 Unable to open %s for reading
CORE E29702 Unable to open %s for writing
86 Maintenance and Troubleshooting Guide March 2008
CORE E29703 Unable to load job file for agent %s
CORE E29704 Unable to read header in job file for agent %s
CORE E29705 Unable to read job list in job file for agent %s
CORE E29706 Unable to write header in job file for agent %s
CORE E29707 Unable to write job list in job file for agent %s
CORE E29708 Job not valid for agent
CORE E29709 Agent job list feature not activated
CORE E29710 Invalid line (%s) in agentjobs.raw; skipping
CORE E29711 Invalid header in job file for agent %s; will recreate
CORE E29712 Job name for agent %s too long; will truncate to %d characters
CORE E29714 Unable to load job file for job chain %s
CORE E29715 Unable to write header in job file for job chain %s
CORE E29716 Unable to write job list in job file for job chain %s
CORE E29717 Unable to read header in job file for job chain %s
CORE E29718 Invalid header in job file for job chain %s; will recreate
CORE E29719 Unable to read job list in job file for job chain %s
CORE E29800 Job Chain %s does not exist
CORE E29900 Unable to start next job %s
CORE E29901 %s - Chain %s already started.
CORE E29902 %s - Max number of chains already started.
CORE E29903 Unable to start job %s
CORE E29904 Unable to stop job %s
CORE E29950 Feature not available in Softdialer Mode
CORE E29951 Specified more than %d line groups for use on job
CIVR E30000 IVR: -- The IVR_REC_LEN is not defined
CIVR E30001 IVR: -- The IVR_HEADER is not defined
CIVR E30002 IVR: -- The signal call failed - SIGUSR1
CIVR E30003 IVR: -- Cannot open the IVR read port
Maintenance and Troubleshooting Guide March 2008 87
CIVR E30004 IVR: -- Cannot open the output file 1.
CIVR E30005 IVR: -- Problem with read from tty port
CIVR E30006 IVR: -- Received 15 bad IVR records1
CIVR E30007 IVR: -- Problem writing to output file
CIVR E30008 IVR: -- The signal call failed.
CIVR E30009 IVR: -- SIGUSR Cannot open output file 2.
CIVR E30010 IVR: -- SIGUSR Cannot open output file 1.
CIVR E30011 IVR: -- The IVR_TIME_INTVAL is not defined
CIVR E30012 IVR: -- The IVR_NUM_PORTS is not defined
CIVR E30013 IVR: -- Could not exec the process for child
CIVR E30014 IVR: -- Could not fork the child
CIVR E30015 IVR: SYSTEM call for ivr_mk_clist did not return 0
CIVR E30016 IVR: Could not re-exec the process for child
CIVR E30017 IVR: Tried to restart the child 15 times unsuccessfully
CIVR E30018 IVR -- SEVERE ERROR, IVR_DAEMON HAS DIED.
CIVR E30019 IVR: -- System call did not return 0
RECORDX E31200 Null character specified as fill not allowed
RECORDX E31400 Not a valid hexadecimal
DBCONST E32000 %s - No backup list file given
DBCONST E32001 %s - File dictionary name missing
DBCONST E32002 %s - Calling list or file dictionary name missing
DBCONST E32003 %s - One or both merge file names missing
DBCONST E32004 %s - Warning: Reached record limit, additional data not converted
DBCONST E32005 %s - Invalid calling list name
DBCONST E32006 %s - Mismatch in calling lists
DBCONST E32007 %s - Invalid tape record size
DBCONST E32008 %s - Invalid switch year parameter (%d), using default of 70
DBCONST E32400 %s - Rewind failed
88 Maintenance and Troubleshooting Guide March 2008
DBCONST E32401 %s - System OS ID error
DBCONST E32402 %s - Backup device name(s) missing
DBCONST E32403 %s - Calling list name missing
DBCONST E32404 %s - Dictionary or configuration file missing
DBCONST E32405 %s - Bad tape device name: %s
DBCONST E32600 %s - Failed to execute program '%s' successfully.
DBCONST E32601 Wrong hexadecimal value specified with -a option
DBCONST E32602 CHARSET parameter in .conf file must be set to 'ASCII', with moj_conv program.
DBCONST E32603 CHARCASE parameter in .conf file must be set to 'UPLOW', with moj_conv program.
DBCONST E32604 TAPEDEV parameter in .conf file must not be the device in /dev directory.
DBCONST E32605 BLKSIZE parameter and RESIZE parameter are inconsistent.
DBCONST E32606 Cannot read Japanese code control file %s
DBCONST E32607 No DBCS conversion table name in the code control file.
LETTRGN E34000 formlet - Error reading record: %s
LETTRGN E34001 Criteria error: %s
LSTEXTR E35000 ext_data - Failed to insert new Calling List header info %s
LSTEXTR E35001 ext_data - Invalid new calling list name
LSTEXTR E35002 ext_data - Unable to append - calling list fdicts differ
LSTEXTR E35200 ext_list - Invalid new calling list name
LSTEXTR E35201 ext_list - Failed to read file dictionary %s
DBMAINT E36000 Record_ed: Mark field '%s' not defined for list '%s'
DBMAINT E36001 Invalid record number %s
DBMAINT E36002 Failed to find record number %d
DBMAINT E36003 Failed to determine HASH field %s
DBMAINT E36004 Failed to find select field %s
DBMAINT E36005 Failed to find record number %d
Maintenance and Troubleshooting Guide March 2008 89
DBMAINT E36006 Record_ed - Could not save Record %d, Value=%s in List %s
DBMAINT E36101 Rec_update - Child process %s terminated
DBMAINT E36200 Pattern error in field %d
DBMAINT E36201 Hash file '%s' (%s) is older than calling list '%s' (%s), please run clhash again.
DBMAINT E36202 Hash key field length %d does not match calling list field length %d
DBMAINT E36203 Source calling list of hash file %s does not match current calling list %s
TOOLS E37000 Error - Failed to load security files
TOOLS E37001 Invalid Name
TOOLS E37002 Name already exists or invalid name
TOOLS E37003 Invalid character in Name
TOOLS E37004 A password must be entered:ERROR
TOOLS E37005 Login Group is Not Valid
TOOLS E37006 ERROR: exceeded valid number of user entries[%d].:Invalid,%s:%s:%s:%s
TOOLS E37007 Createop:%s:Discard:%s:
TOOLS E37008 Invalid Name:Duplicate account
TOOLS E37009 Name already exists:Failed to add account
TOOLS E37010 File is locked by another supervisor, try later!
TOOLS E37011 Unknown error, try later!
TOOLS E37012 No group information is loaded--%s
TOOLS E37013 Fail to read createop.cfg file
TOOLS E37014 Current user is not authorized
TOOLS E37015 Validate group information failed
TOOLS E37016 Invalid old password, Cannot add %s
TOOLS E37017 Error, cannot add %s
TOOLS E37018 Invalid or duplicate user %s
TOOLS E37019 Fail to add to ftpusers-> %s
90 Maintenance and Troubleshooting Guide March 2008
TOOLS E37020 Invalid user name length: %s
TOOLS E37021 Cannot change owner of %s to admin
TOOLS E37022 Invalid sub-group found in sub-group string %s of group.pds file
TOOLS E37023 Could not setuid(), error = %d
TOOLS E37024 Could not setgid(), error = %d
TOOLS E37025 Have to supply both password file and vllogin or group file
TOOLS E37026 Fail to getpwnam(%s)
TOOLS E37027 alter_entry: Fail to do lckpwdf()
TOOLS E37028 %s not found in vllogin
TOOLS E37029 Fail to enforce new password for %s
TOOLS E37030 DEL_REC: Fail to delete %s
TOOLS E37031 EDIT_REC: Fail to modify account %s
TOOLS E37032 Account not found: %s
TOOLS E37033 Fail to link correct profile for %s
TOOLS E37034 Fail to add user %s
TOOLS E37035 Missing Password or Menu fields: %s:%s:%s:%s
TOOLS E37036 %s not found in group file
TOOLS E37037 WARNING: Reached limit of MAX_USERS (%d) as set in createop.cfg file
TOOLS E37038 ERROR: Reached limit of MAX_USERS (%d) as set in createop.cfg file
TOOLS E37039 Error - Failed to load existing user IDs
EDITOR E37200 Invalid Expert Calling Ratio
EDITOR E37201 Field '%s' not filled in
EDITOR E37202 No Inbound jobs allowed on this system.
EDITOR E37203 Number of reserved inbound lines must be from 1 to %s
EDITOR E37204 Invalid call completion code specified
EDITOR E37205 Invalid start or stop time format
Maintenance and Troubleshooting Guide March 2008 91
EDITOR E37206 Invalid Hit Rate
EDITOR E37207 Invalid paired phone count/type
EDITOR E37208 Invalid line type specified
EDITOR E37209 HUNTGRP: format error
EDITOR E37210 No HUNTGRP setting.
EDITOR E37211 Selection list not available for use
EDITOR E37212 Selection list for job not found
EDITOR E37213 No Verification Selection List Ready for Job
EDITOR E37214 Selection list not created with this Calling List
EDITOR E37215 Number of telephone lines must be from 1 to 96
EDITOR E37216 An odd number of telephone lines is not allowed
EDITOR E37217 Quota Value less than one
EDITOR E37218 There must be a script label for answer specified
EDITOR E37219 Invalid call completion code for Quota Value %d
EDITOR E37220 Quota %d is not OP completion code
EDITOR E37221 %s field missing from %s
EDITOR E37222 Creation date/time error: %s
EDITOR E37223 Data Transfer file %s.axfr: %s not in %s
EDITOR E37224 Wrong job for verification editor
EDITOR E37225 No editable line found in file: %s
EDITOR E37226 Failed to create link list header
EDITOR E37227 ERROR: Job %s is already running
EDITOR E37228 ERROR: Job file %s already in use
EDITOR E37229 Failed to find linked job file: %s
EDITOR E37230 Managed dialing job linking is not permitted
EDITOR E37231 Sales verification job linking is not permitted
EDITOR E37232 Job linking is not permitted
EDITOR E37233 %s - Unable to start job %s
EDITOR E37234 Failed to find Inbound Job Screen: %s
92 Maintenance and Troubleshooting Guide March 2008
EDITOR E37235 Failed to find Inbound Job Map: %s
EDITOR E37236 Failed to read Inbound List: %s
EDITOR E37237 Failed to find MSCRN - Job screen: %s
EDITOR E37238 Failed to find MSCRN - Job map: %s
EDITOR E37239 Number of multi screens does not match number of multi lists
EDITOR E37240 Failed to find ASCRN - Job screen: %s
EDITOR E37241 Failed to find MSCRN - Job map: %s
EDITOR E37242 Failed to read Assoc List: %s
EDITOR E37243 Number of associate screens does not match number of associate lists
EDITOR E37244 Number of edit fields does not match number of associate lists
EDITOR E37245 %s - %s(err_code=%d)
EDITOR E37246 %s(err_code=%d)
EDITOR E37247 Unable to clear %s
EDITOR E37248 Line type specified already in use
EDITOR E37249 Improper usage
EDITOR E37250 There must be a script label for call specified
EDITOR E37251 Initial Hit Rate out of range (1-100)
EDITOR E37252 Failed to open script file for IVR ID %s
EDITOR E37253 IVR script name not specified; required if IVR ID specified
EDITOR E37254 Unable to find %s in script file for IVR ID %s
EDITOR E37255 Calling list %s is not on local dialer.
EDITOR E37256 Selecting unit to log in to is not permitted with inbound-only job
TOOLS E37300 %s: Invalid process ID %d
TOOLS E37301 termprocess:fail to send signal message %s
EDITOR E37400 Failed to find %s: %s
EDITOR E37401 Failed to save %s file: %s
Maintenance and Troubleshooting Guide March 2008 93
EDITOR E37402 Failed to allocate %s
EDITOR E37403 Failed to read %s: %s
EDITOR E37404 Number of %s do not match number of %s
EDITOR E37405 %s field missing or incorrect length
TOOLS E37500 Fail to terminate process %d, errno %d
TOOLS E37501 Fail to kill process %d, errno %d
TOOLS E37502 Fail to send SIGUSR1 process %d, errno %d
TOOLS E37503 Fail to setreuid to (-1, 0)
EDITOR E37600 Field #%d not filled in
EDITOR E37601 No editable line found in file: %s
EDITOR E37602 Failed to create link list header
EDITOR E37603 ERROR: %s already in use
EDITOR E37604 Unable to clear %s
TOOLS E37800 Groupname %s has invalid length
TOOLS E37801 Skeleton path %s for group %s does not exist
TOOLS E37802 Could not add group %s
MARKREC E38000 Chkentdt - Failed to create old database index
MARKREC E38001 Chkentdt - Failed to create new database index
MARKREC E38002 Chkentdt WARNING - cannot open old database %s. Assuming none exists
MARKREC E38003 Chkentdt ERROR:-S option must be used with -i option
MARKREC E38004 Chkentdt - Unable to malloc hash_table
MARKREC E38400 Latemrk - Failed to create calling list index
MARKREC E38401 Latemrk - Failed to create late list index
MARKREC E38402 Latemrk - file error building late list
MARKREC E38403 Latemrk - field_list - key fields not the same length
MARKREC E38404 Latemrk - %s recno %d locked; skipping;
MARKREC E38405 Latemrk - %s '%s' not found in %s, skipping;
MARKREC E38406 Latemrk - Field '%s' not found in %s
94 Maintenance and Troubleshooting Guide March 2008
MARKREC E38600 %s - Failed to read record: %s
MARKREC E38601 %s - Failed to update record: %s
MARKREC E38602 %s - Failed to create calling list search index
MARKREC E38603 %s - %s '%s' not found in %s.
MARKREC E38604 %s - Valid record range is 1 - %d.
MARKREC E38605 %s - No records in calling list
MARKREC E38800 %s - key fields not the same length
MARKREC E38801 %s - Key '%s' not found in hash file
MARKREC E38802 %s - Error allocating memory for '%s'
MENU E39000 Failed to find user logon entry %s in V/L login file
MENU E39001 Error _ No Menu Name
MENU E39002 Help File Not Found: %s
MENU E39003 Menu File Not Found: %s
MENU E39004 MENU(%d)Signal Interrupt=%d
MENU E39005 %s - User not authorized to run this menu - %s
MENU E39200 Incorrect Item Number
MENU E39201 Failed to Search Directory for File Extension: %s
MENU E39202 Invalid list number
PCEXTRA E40000 No Calling Statistics Files Available
PCEXTRA E40001 PC Analysis - Reopen of %s failed
PCEXTRA E40002 PC Analysis - Invalid File Type of %c
PCEXTRA E40003 No Agent Files Available
PCEXTRA E40200 Pc Analysis - Unknown Type %c for Input File type
PCEXTRA E40201 File Name not Found
PCEXTRA E40202 File does not Exist
PCEXTRA E40203 In Help mode, Cannot Select Criteria
PCEXTRA E40204 Invalid Field Order Select Number
PCEXTRA E40400 %s - Invalid config file name
PCEXTRA E40401 Invalid Extraction Type
Maintenance and Troubleshooting Guide March 2008 95
PREPROC E42000 -S option must be used with -i option
PREPROC E42100 -S option must be used with -i option
PREPROC E42101 Third argument must be -c
PREPROC E42400 %s - Failed hash open of %s
PREPROC E42401 %s - Failed to stat associated calling list %s
PREPROC E42402 %s - %s : %s
PREPROC E42403 %s - Associate list and hash index date/time do not agree for %s. Run clhash
PREPROC E42404 %s - Field %s length %d not match hash key %s length %d
PREPROC E42405 Record number %s too big for field %s
PREPROC E42406 %s - Record number %s too big for field %s
PREPROC E42600 Field undefined in the calling list
PREPROC E42601 Gap found between field names within group
PREPROC E42602 Missing assigned field values
PREPROC E42603 Gap found in value selections
PREPROC E42604 Field value has an invalid character
PREPROC E42605 Missing Range or Item specification in field values
PREPROC E42606 Values not in ascending order
PREPROC E42607 No fields selected for reporting
PREPROC E42608 Miss value in filler criteria
PREPROC E42609 Miss field name in filler criteria
PREPROC E42610 Pattern Error: %s
PREPROC E42611 'ALL' cannot co-exist with other selections
PREPROC E42612 Unknown call completion code
PREPROC E42613 %s - Unknown select file %s
PREPROC E42614 %s - Unknown supplement file %s
PREPROC E42615 Invalid code. Type R for row, C for column or T for table.
PREPROC E42616 Invalid line number
96 Maintenance and Troubleshooting Guide March 2008
PREPROC E42617 Cannot move to same location
PREPROC E42800 Invalid number indicator: %s
PREPROC E42801 -S option must be used with -i option
PREPROC E43000 %s - Match field %s length %d not match associated field %s length %d
PREPROC E43001 Record %d - Bad Record number in field %s
PREPROC E43002 %s - Record %d - Assoc list %s read error(%d) for record no. %d
PREPROC E43200 Record %d - Too many records in set
PREPROC E43201 %s - Record %d - Too many records in set
PREPROC E43400 TERMINAL ERROR
PREPROC E43401 Record %d - READ ERROR (%d)
PREPROC E43402 Record %d - WRITE ERROR (%d)
PREPROC E43403 Record %d - HASH ERROR (%d)
PREPROC E43404 %s - Failed hash initialization!
PREPROC E43405 %s - Failed to stat calling list %s
PREPROC E43406 %s - Record %d - READ ERROR (%d)
PREPROC E43407 %s - Record %d - HASH ERROR (%d)
PREPROC E43408 %s - Record %d - WRITE ERROR (%d)
PREPROC E43500 Calling List %s open error
PREPROC E43501 Calling List %s header error
PREPROC E43502 Calling List %s definition error
PREPROC E43503 Field name %s missing in Calling List %s
PREPROC E43504 Error initializing LISTS hash file %s
PREPROC E43505 Error hashing record %d in Calling List %s. Errcode = %d
PREPROC E43506 Error writing hash record %d in hash file %s. Errcode = %d
PREPROC E43507 System_value %d too big. Limit is MAXMSGS
PREPROC E43508 Record %d - READ ERROR
PREPROC E43509 Record %d - WRITE ERROR
Maintenance and Troubleshooting Guide March 2008 97
PREPROC E43510 Record %d - CALLING LIST BUFFER MALLOC ERROR
PREPROC E43511 Error: colon missing on line %s:%s
PREPROC E43512 %s:%s, Field name %s missing in Calling List %s
HISTORY E44000 %s - Bad arguments
HISTORY E44001 %s - Memory allocation error
HISTORY E44002 %s - File access error
HISTORY E44003 %s - Equation syntax error
HISTORY E44004 %s - Invalid format code
HISTORY E44005 %s - Report configuration error
HISTORY E44006 %s - No HISTORY variable in master.cfg
HISTORY E44007 %s - History dictionary error
HISTORY E44008 %s - Incorrect sort field name
HISTORY E44009 %s - Failed to open report format file
HISTORY E44010 %s - Failed to write output report file
HISTORY E44011 %s - No record selection criteria given
HISTORY E44012 %s - Failed to open input file
HISTORY E44013 %s - Failed to set/reset record lock
HISTORY E44014 %s - job and report format type are not compatible
RPT_MGR E45000 rpt_view - Caught signal %d and terminated
RPT_MGR E45001 Incorrect Report Number
RPT_MGR E45200 File name for view missing
RPT_MGR E45201 pds_view - Caught signal %d and terminated
RPT_MGR E45202 REPORT %s NOT FOUND
RPTGEN E46200 Invalid line number
RPTGEN E46201 Exceeded maximum number of expressions
RPTGEN E46202 Invalid PAGE flag
RPTGEN E46203 Invalid RESET flag
RPTGEN E46204 Missing expression name
98 Maintenance and Troubleshooting Guide March 2008
RPTGEN E46205 Unknown operator: %s
RPTGEN E46206 Missing operator
RPTGEN E46207 Too many operands for operator '%s'
RPTGEN E46208 Missing operand for operator '%s'
RPTGEN E46209 %s is undefined in the printcap file
RPTGEN E46210 %s is undefined in the dictionary
RPTGEN E46211 Unknown variable name %s
RPTGEN E46212 Unmatching ' in literal string %s
RPTGEN E46213 Unknown data type: %s
RPTGEN E46214 Invalid data type for operator %s
RPTGEN E46400 No expression located at cursor position
RPTGEN E46401 Insufficient memory for screen buffer allocation
RPTGEN E46402 End of file reached
RPTGEN E46403 No lines in buffer
RPTGEN E46404 Invalid starting location - expression overlap
RPTGEN E46405 Invalid ending location - expression overlap
RPTGEN E46406 Must specify start location
RPTGEN E46407 Invalid ending location
RPTGEN E46408 Exceeded maximum report dimensions
RPTGEN E46409 Failed to open format temp file
RPTGEN E46410 Invalid line marker at line %d
RPTGEN E46411 Invalid starting location
RPTGEN E46412 Invalid ending location
RPTGEN E46600 No entries in printcap file
RPTGEN E46601 No entries in file dictionary
RPTGEN E46602 No expressions defined in file
RPTGEN E46603 Failed to open report list file
RPTGEN E46800 Failed to list defined printer model names
RPTGEN E46801 Failed to read printcap file
Maintenance and Troubleshooting Guide March 2008 99
RPTGEN E46802 Unknown printer model
RPTGEN E46803 Report -
RPTGEN E46804 Failed to get defn. for calling list
RPTGEN E46805 File name missing
RPTGEN E46806 Failed to open text substitution file
RPTGEN E46807 Report control file name too long
RPTGEN E46808 Failed to write report control file
RPTGEN E46809 Failed to read report help file
RPTGEN E46810 Failed to open report control file: %s
RPTGEN E46811 Unknown report control file: %s
SCRNBLD E47000 Failed to initialize
SCRNBLD E47001 Failed to read command keys file
SCRNBLD E47002 Terminal Screen too small for screen editor.
SCRNBLD E47003 May not shift fields further
SCRNBLD E47004 Only Date, Time, or Numeric fields may have Verification Formats
SCRNBLD E47005 Field does not fit in screen.
SCRNBLD E47006 May not overlay screen labels.
SCRNBLD E47007 May not place fields in column one.
SCRNBLD E47008 May not overlap screen fields.
SCRNBLD E47009 May only edit lists [1..%d]
SCRNBLD E47010 %s(ScreenBuilder) - Failed to open output report file
SCRNBLD E47011 May not change to the same file dictionary.
SCRNBLD E47012 No Jobs available
SCRNBLD E47013 No jobs use the current screen
SCRNBLD E47014 Screen does not exist:
SCRNBLD E47015 No changes made.
SCRNBLD E47016 UNFINISHED COMMAND: TESTMODE
SCRNBLD E47017 Invalid %s number specified=%d.
100 Maintenance and Troubleshooting Guide March 2008
SCRNBLD E47018 Cut & Paste Field Not %s
SCRNBLD E47019 You may not PASTE over fields.
SCRNBLD E47020 Fields may not start in column one.
SCRNBLD E47021 Field in block does not fit on screen.
SCRNBLD E47022 Fields may not overlap.
SCRNBLD E47023 Block must fit on screen.
SCRNBLD E47024 Field[%s,%d] does not match dictionary.
SCRNBLD E47025 Not enough menu options
SCRNBLD E47026 ERROR: no screen open
SCRNBLD E47027 Failed to write screen file
SCRNBLD E47028 Save to a different name.
SCRNBLD E47029 You may not %s the current edit screen.
SCRNBLD E47030 NO HELP TABLE
SCRNBLD E47031 Protected file.
SCRNBLD E47032 Use a different name.
SCRNBLD E47033 Invalid sequence number specified=%d.
SCRNBLD E47034 Invalid field number specified=%d.
SCRNBLD E47035 Cut & Paste Field Not Copied
SCRNBLD E47036 Cut & Paste Field Not Cut, or Copied
SCRNBLD E47037 Cut & Paste Field Not Cleared
SCRNBLD E47038 You may not delete the current edit screen.
SCRNBLD E47039 You may not recover the current edit screen.
SCRNBLD E47040 Failed to initialize Screen
SCRNBLD E47041 Failed to initialize Keyboard
SWIFEXC E48000 Conflicting interface types specified.
SWIFEXC E48001 swif - virtual ports specified are out of range, using defaults
SWIFEXC E48002 Failed to make Ethernet connection to switch. Giving up!
Maintenance and Troubleshooting Guide March 2008 101
SWIFEXC E48003 Failed to make Ethernet connection to switch. retry=%d, code=%d
SWIFEXC E48004 *** %d=swie_open() retry=%d failed
SWIFEXC E48005 swif_ct - failed to start. Giving up
SWIFEXC E48006 CTI Link Failure
SWIFEXC E48007 CTI Link Recovery
SWIFEXC E48008 Could not open password configuration file.
SWIFEXC E48009 Could not read password configuration file.
SWIFEXC E48010 CTI Error: %s
SWIFEXC E48011 CTI Error: %s %d
SWIFEXC E48012 ReasonCode (%d) is out of range.
SWIFEXC E48013 CTI not configured for agent events.
SWIFEXC E48014 Unable to register for CTI System Status Events
SWIFEXC E48015 No Call for Route Request: RegReqID = %d, CrossRefID = %d, CallID = %d
SWIFEXC E48016 No invoke id for CTI confirmation event: %s %d
SWIFEXC E48017 Insert into STL Map failed, Map name = %s
SWIFEXC E48018 Feature Request for agent event failed, error = %d
SWIFEXC E48019 RecvSysStat - unknown systemStatus = %d
SWIFEXC E48020 TSAPI Command (%s) failed, error = %d
SWIFEXC E48021 Sent Connect Request after Hangup Request. Porter = %d
SWIFEXC E48022 Invalid Prompt_id (%d)
SWIFEXC E48023 Unknown Confirmation event type (%d)
SWIFEXC E48024 TSAPI Command (%s) failed, error = %d, Unable to UUI.
SWIFEXC E48025 CSTAUniversalConfEvent for Call Monitor, error = %d.
SWIFEXC E48026 No available phantom numbers for acquiring an agent
SWIFEXC E48027 Route End Error: RegReqID = %d, CrossRefID = %d, Error = %d
102 Maintenance and Troubleshooting Guide March 2008
SWIFEXC E48028 OnEventEstablished: Unknown command (%d)
SWIFEXC E48029 Unable to play voice message, unknown agent extension %s
SWIFEXC E48030 Unknown Agent Event (%d), extension (%s)
SWIFEXC E48031 Unable to get hostname to send to the Service Monitor.
SWIFEXC E48032 Unable to send soe_message to the Service Monitor.
SWIFEXC E48033 Unable to create the soe mailbox (%s) error (%d)
SWIFEXC E48034 CSTAUniversalConfEvent (%d) for Phantom number (%s).
SWIFEXC E48035 Unable to set up communications with the server's message queue.
SWIFEXC E48036 MakeCall/MakePredictiveCall/TransferCall Confirm error (%d).
SWIFEXC E48037 %s: Confirm error (%d).
SWIFEXC E48038 OnEventEstablished: SWIF_RESOURCE_LIMIT - cause (%d)
SWIFEXC E48400 Opmon - Unable to setup channel with swif
SWIFEXC E48401 Opmon - Unable to setup input IPC.
SWIFEXC E48402 Opmon - Unable to attach to data segment
SWIFEXC E48403 Opmon - Unable to load operator line configuration
SWIFEXC E48404 Opmon - Invalid number of operators configured.
SWIFEXC E48405 Opmon failed to get time of day to process timeouts
SWIFEXC E48406 Opmon failed to get time of day to set timeout
SWIFEXC E48407 Opmon: Unable to start dialback
SWIFEXC E48408 Opmon received bad headset: %d
SWIFEXC E48409 Opmon bad headset type: %d, hs=%d
SWIFEXC E48410 Opmon received unknown command: %s
SWIFEXC E48411 Opmon unable to find string for msg code %d
SWIFEXC E48412 Opmon : Signal Abort:%s(%d)
SWIFEXC E48413 OPERATOR MONITOR ENABLE FAILED: (%d)%s
Maintenance and Troubleshooting Guide March 2008 103
SWIFEXC E48414 OPMON DIALBACK FAILURE: (%d)%s,ns=%x,rsb=%x,cause_IE=%x
SWIFEXC E48415 NO HEADSET ASSIGNED TO KEY
SWIFEXC E48416 OPERATOR TYPE MISMATCH FOR HEADSET AND KEY
SWIFEXC E48417 OPERATOR TYPE FOR KEY IS INVALID
SWIFEXC E48418 UNKNOWN COMMAND
SWIFEXC E48419 INVALID GROUP CONFIGURATION FOR DIAL-BACK
SWIFEXC E48420 Opmon - Unable to setup agent_mgr IPC.
SWIFEXC E48421 Invalid DBKGRP in master.cfg
SWIFEXC E48422 Number in DBKGRP and NUM_OF_PBXS in master.cfg is inconsistent
SWIFEXC E48423 Opmon: swif_ct communication failure
SWIFEXC E48600 Missing or invalid headset id
SWIFEXC E48601 Missing or invalid CFGTIME value
SWIFEXC E48602 opmon.cfg - Headset configuration has changed
SWIFEXC E48603 opmon.cfg - Changes will not take effect until reboot
SWIFEXC E48604 Duplicate headset id %d (L%d)
SWIFEXC E48605 Missing comma-separated fields
SWIFEXC E48606 Duplicate key %s
SWIFEXC E48607 Missing or invalid key
SWIFEXC E48608 Missing or invalid phonenum
SWIFEXC E48609 Single value required (not range)
SWIFEXC E48610 Missing or invalid dial-in login timeout
SWIFEXC E48611 Missing or invalid group number
SWIFEXC E48612 A DIALBACK line must precede this line
SWIFEXC E48613 Dialback phone number too long with prefix
SWIFEXC E48614 Dialback phone number too long with suffix
SWIFEXC E48615 Opmon: cleanup abnormal termination of session for headset %d
104 Maintenance and Troubleshooting Guide March 2008
SWIFEXC E48616 Missing or invalid ISDN protocol
SWIFEXC E48800 Opmon failed to get time of day to set timeout
SWIFEXC E48801 Opmon: Unknown state call %d, hs=%d.
SWIFEXC E48802 Opmon: Key code already in use by headset %d: key=%s
SWIFEXC E48803 Opmon: Unable to play greeting to operator
SWIFEXC E48804 Opmon: HANGUP FAILED: equip=(%d)%x
SWIFEXC E48805 Invalid key code entered: key=%s
SWIFEXC E48806 Opmon: Unable to play prompt %d on equipnum %d:%s
LIBCPP E49001 Password verification failed for user: %s, Exception: %s
UTILITY E50000 Data File Not in Calling List Format
UTILITY E50100 Exceeded number of %s agents
UTILITY E50101 Exceeded wait limit for acceptance
UTILITY E50200 Invalid time format
UTILITY E50201 Invalid hour in time
UTILITY E50202 Invalid minutes in time
UTILITY E50203 Invalid date format
UTILITY E50204 Invalid year in date
UTILITY E50205 Invalid month in date
UTILITY E50206 Invalid day in date
UTILITY E50600 No Headset ID Specified.
UTILITY E50601 Failed to Initialize Keyboard
UTILITY E50602 Failed to Initialize screen environment
UTILITY E50603 Failed to create display window.
UTILITY E50604 Not a pseudo-terminal port
UTILITY E50605 No response from system, login failed
UTILITY E50606 Headset ID (%d) Out of Range (1-%d)
UTILITY E50607 Failed to select Headset ID(%d)
Maintenance and Troubleshooting Guide March 2008 105
UTILITY E50608 Exceeded retry limits, No valid headset ID specified
UTILITY E50609 Exceeded retry limits, No valid key code specified
UTILITY E50610 Headset ID (%d) Already in use by %s
UTILITY E50611 Headset ID (%s) Already in use
UTILITY E50612 No more Headsets permitted on system
UTILITY E50613 Failure to access Headset Table
UTILITY E50800 op_logout: failed to establish input queue for hs %s
UTILITY E51001 Goodbye...
UTILITY E51200 No information on keys for job %s
UTILITY E51201 No such keys file defined named: %s
UTILITY E51400 Port_start - Failed to get VOICEDIR directory
UTILITY E51600 No <###tran.stat> files are marked with todays date
UTILITY E51601 Cannot open file chi_data
UTILITY E52800 Only single zipcode field is allowed
UTILITY E52801 Exceeded area code fields limit of (%d)
UTILITY E52802 Illegal option -%c
UTILITY E52803 No main option specified
UTILITY E52804 '-f' option also require '-a' & '-z' option
UTILITY E52805 Bad pattern specified with '-x' option
UTILITY E52806 Area code offset can't exceed %d
UTILITY E53000 %s - Unable to open Calling List '%s'
UTILITY E53001 %s - Unable to get List Definition for '%s'
UTILITY E53002 %s - Unable to stat Calling List '%s'
UTILITY E53003 %s - Unable to open Prepare Check file '%s'. Must run clhash first.
UTILITY E53004 %s - Unable to find correct entry for '%s' in Prepare Check file '%s'. Must run clhashin first.
UTILITY E53005 %s - Field '%s' not in Calling List '%s'
UTILITY E53006 %s - Unable to open Associated Calling List '%s'
UTILITY E53007 %s - Unable to stat Associate List '%s'
106 Maintenance and Troubleshooting Guide March 2008
UTILITY E53008 %s - Field '%s' not in Associate Calling List '%s'
UTILITY E53009 %s - Match field '%s' length %d not same as associated field '%s' length %d!
UTILITY E53010 %d - READ ERROR (%d)
UTILITY E53011 %s - Record %d - READ ERROR (%d)
UTILITY E53012 %d - A READ ERR (%d)
UTILITY E53013 %s - Record %d - ASSOC READ ERROR (%d)
UTILITY E53014 %d - WRITE ERROR (%d)
UTILITY E53015 %s - Associate Record %d - WRITE ERROR (%d)
UTILITY E53016 %d BAD RECORDS
UTILITY E53017 %s - %d BAD RECORDS
UTILITY E53018 %s - %d BAD RECORDS
UTILITY E53019 %s - Unable to open: %s
UTILITY E53020 %s - Unknown configuration file %s
UTILITY E53021 %s - Unable to allocate list buffer
UTILITY E53022 TERMINAL ERROR
UTILITY E53023 %s - Usage error
IMON E53650 compcode.cfg not found
IMON E53651 INTERNETMONDIR parameter is missing from master.cfg
IMON E53652 Internet Monitor shutting down
IMON E53654 Internet Monitor failed to attach to shared memory - conn_mgr may not be running - exiting
IMON E53655 HTML Page update failed - remote Web server may no longer be mounted
UTILITY E53800 Caught error #%d!
UTILITY E53801 Error %d writing msg '%s' to log file [%s].
UTILITY E53802 Error: Unable to log system message. Message '%s' not found.
UTILITY E53803 Error: Couldn't open file '%s'
UTILITY E53804 Error formatting message '%s'.
Maintenance and Troubleshooting Guide March 2008 107
UTILITY E53805 Error: Nothing to monitor!
UTILITY E53806 Error: Unable to open log file %s for appending.
UTILITY E53807 Error: Couldn't open log file [%s]
UTILITY E53808 Error: Bad date-time format: [%s]
UTILITY E53809 Error: Unable to retrieve EVMON filespec from master.cfg
UTILITY E53810 Error: Config file [%s] was not found.
UTILITY E53811 Error: System call auditing is requested but system is not trusted
UTILITY E53812 Error: File %s was not found. Make sure system auditing is turned on.
UTILITY E53813 Error: Couldn't stat [%s]
UTILITY E53814 Warning: No 'next' audit log defined.
UTILITY E53815 Error: Bad update interval value
UTILITY E53816 Error: Unknown option %c
UTILITY E53817 Error: Unknown/unimplemented entry in cfg file on line %d
UTILITY E53818 Error: The HP-UX auditing system is OFF. Please use SAM to turn it on.
UTILITY E53819 Error: Audctl failed: errno=%d
LISTSVR E54100 Unexpected program exit
LISTSVR E54101 getservbyname ('%s', tcp) failed
LISTSVR E54102 socket () failed
LISTSVR E54103 bind (fd=%d) failed (are clients still connected to sockets of previous listserver instance?)
LISTSVR E54104 listen (fd=%d) failed
LISTSVR E54105 setsockoopt (fd=%d, SO_LINGER) failed
LISTSVR E54106 setsockoopt (fd=%d, SO_KEEPALIVE) failed
LISTSVR E54107 accept (fd=%d) failed
LISTSVR E54108 Usage error
LISTSVR E54109 Received signal %d -- exiting
LISTSVR E54110 FD_ISSET (conn_fd=%d) failed
108 Maintenance and Troubleshooting Guide March 2008
LISTSVR E54111 Write error -- exiting
LISTSVR E54112 Read error -- exiting
LISTSVR E54113 File descriptor too large (fd=%d) -- exiting
LISTSVR E54114 cllstat (fd=%d) failed -- exiting
LISTSVR E54115 cllrddict (fd=%d) failed -- exiting
LISTSVR E54120 fork failed -- errno=%d '%s'
LISTSVR E54121 Unable to open list '%s'
RPTGEN E55000 Insufficient memory for %s
RPTGEN E55001 Error reading records
RPTGEN E55002 Failed to open report output file
RPTGEN E55200 Group may not begin with no criteria
RPTGEN E55201 Gap found between select fields
RPTGEN E55202 Invalid logical connector
RPTGEN E55203 Missing field name
RPTGEN E55204 Missing field value
RPTGEN E55205 Duplicate field name found
RPTGEN E55206 Invalid sort directive
RPTGEN E55207 Error Pattern: %s
RPTGEN E55400 Failed to write text substitution file
RPTGEN E55600 Invalid number
RPTGEN E55601 Insufficient memory for %s
IVR E56001 ivr_supr: Error connecting to socket, errno %d
IVR E56002 ivr_supr: Unknown command ID:%d
IVR E56003 ivr_supr: IVR_INTEGRATION not set in master.cfg
IVR E56004 Invalid IP address: %s
IVR E56005 No host information is loaded--%s
IVR E56006 Error - Failed to load user interface files
IVR E56007 Validation of IVR information failed
IVR E56008 Invalid IVR ID length: %s
Maintenance and Troubleshooting Guide March 2008 109
IVR E56009 IVR ID not found in /etc/hosts file: %s
IVR E56010 IVR ID already exists: %s
IVR E56011 Invalid character in IVR ID: %s
IVR E56012 An IP address must be entered
IVR E56013 Fail to add to /etc/hosts: %s
IVR E56014 IVR ID %s not found
IVR E56015 Failed to add IVR %s
IVR E56016 IVR ID already exists in /etc/hosts file: %s
IVR E56017 Currently connected to IVR %s; cannot change or delete configuration
IVR E56018 IVR IP address already exists: %s
IVR E56019 IVR IP address already found in /etc/hosts file: %s
IVR E56020 ivr_conn: ivr_conn service not found in /etc/services
IVR E56021 ivr_conn: Unable to create socket, errno %d - %s
IVR E56022 ivr_conn: Unable to bind to the socket, errno %d
IVR E56023 ivr_conn: Unable to connect to the socket, errno %d
IVR E56024 ivr_conn: Unable to listen to the socket, errno %d
IVR E56025 ivr_conn: Error in select, errno %d
IVR E56026 ivr_conn: Error in accept, errno %d
IVR E56027 ivr_conn: Error on recv from supervisor socket, errno %d
IVR E56028 ivr_conn: Nothing read from supervisor socket, errno %d
IVR E56029 ivr_conn: Unknown message '%s:%s' from supervisor socket
IVR E56030 ivr_conn: Error on recv from IVR socket, errno %d
IVR E56031 ivr_conn: Nothing read from IVR socket, errno %d
IVR E56032 ivr_conn: Unknown message (%c) from IVR socket
IVR E56033 ivr_conn: Invalid message (%s) in input IPC queue
IVR E56034 ivr_conn: Unable to set socket to FIOASYNC, errno %d
110 Maintenance and Troubleshooting Guide March 2008
IVR E56035 ivr_conn: Unable to set socket to FIOSNBIO, errno %d
IVR E56036 ivr_conn: Unable to set process to receive SIGIO, errno %d
IVR E56037 ivr_conn: Send error, client %d (still trying)
IVR E56038 ivr_conn: Send error, client %d (giving up)
IVR E56039 : err=%d sent=%d rem=%d dt=%d try=%d
IVR E56040 ivr_conn: Error in select in MicroSleep, errno %d
IVR E56041 ivr_conn: Fail to write to pipe - sd %d
IVR E56042 ivr_conn: Caught signal %d, err %d
IVR E56043 ivr_conn: sigaction failed in InitSigHandlers
IVR E56044 ivr_conn: IVR pool job '%s' does not exist
IVR E56045 ivr_conn: Error in trying to access IVR pool job '%s'; errno = %d
IVR E56046 ivr_conn: Already connected to IVR '%s'
IVR E56047 ivr_conn: Not connected to IVR '%s'
IVR E56048 ivr_conn: Still connected to IVR '%s'
IVR E56049 ivr_conn: Reset of IVR '%s' in progress, please wait...
IICB E57000 Dispatcher startup soe_init error: %d
IICB E57001 Dispatcher startup invalid argument count: %d
IICB E57002 Linked list insert error: %d for list: %s
IICB E57003 Linked list create error: %d for list: %s
IICB E57004 Unable to find opmon IPC
IICB E57005 Unable to create dispatcher mailbox <%s>, error: %d
IICB E57006 Cleaning up received fatal signal: %d
IICB E57007 Error: %d deleting dispatcher mailbox
IICB E57008 Send message error: %d <%s>
IICB E57009 Error trying to malloc space: <%s>
IICB E57010 Error opening file: <%s>
IICB E57011 Unexpected object: %d msgtype: %d from md: %d
Maintenance and Troubleshooting Guide March 2008 111
IICB E57012 Invalid msgtype: %d from md: %d
IICB E57013 Receive message error: %d
IICB E57014 Unknown mode %s: %d
IICB E57015 Attribute not found: %d
IICB E57016 Linked list queuing error: %s
IICB E57017 Invalid mailbox: %s
IICB E57018 Invalid event: %d %s
IICB E57019 Unable to register to mailbox <%s>, error: %d
IICB E57020 Duplicate acquire request on vdn <%s>
IICB E57021 Not enough licenses - Max acquire agents: %d
IICB E57022 Invalid attribute: %d %s
IICB E57023 Unexpected call connect for call_id: %d
IICB E57024 Unexpected call made to vdn: <%s> scai_link: %d
IICB E57025 Call reject error: %d for call_id: %d
IICB E57026 Invalid job id: %d
IICB E57027 Unexpected create call for call_req_id: %d
IICB E57028 Invalid action: %d %s
IICB E57029 Invalid process state: %d %s
IICB E57030 Extension <%s> is already in use by user: %d
IICB E57031 Error: %d as a response to: <%s> message
IICB E57032 Unknown resp_type event: %d
IICB E57033 Unexpected response objid: %d, invokeid: %d
IICB E57034 Process <%s> not responding to msg: <%s>
IICB E57035 Get time error: <%d>, will try again
IICB E57036 Invalid timeout event: <%d>
IICB E57037 Voice message not defined: <%d>
IICB E57038 Extension <%s> scai_link: %d is not installed
IICB E57039 Expected timeout <%s> not found, call_id: <%d>
IICB E57040 Expected timeout <%s> not found, vdn: <%s>
112 Maintenance and Troubleshooting Guide March 2008
IICB E57041 Release of pbx ext <%s> which is not fully acquired
IICB E57042 User id %d was already in use
IICB E57043 User ext <%s> scai_link <%d> is not found
IICB E57044 Unable to read acd_license.cfg, error: <%d>
CORE E58002 %s - Unable to initialize soe (%d)
JOBCTRL E59500 Job %s not currently running.
JOBCTRL E59501 Illegal parameters: %s
JOBCTRL E59502 Job %s not ready.
JOBCTRL E59503 Job name not specified: %s
JOBCTRL E59505 Job(%s) not linkable
JOBCTRL E59506 Malloc failure in list_agents
JOBCTRL E59507 Inbound capable jobs only: %s
JOBCTRL E59508 Outbound capable jobs only: %s
JOBCTRL E59509 Monitoring of operator disabled
JOBCTRL E59510 Error, no operator %s on job %s
JOBCTRL E59511 Managed dialing capable jobs only: %s
JOBCTRL E59512 Illegal time zone: %s
JOBCTRL E59513 Illegal action %s
JOBCTRL E59514 Inbound capable jobs only
JOBCTRL E59516 Outbound capable jobs only
JOBCTRL E59517 Managed dialing capable jobs only
JOBCTRL E59518 Illegal time zone name %c
JOBCTRL E59519 Unable to open transfer lock file %s
JOBCTRL E59520 Not a multi-unit job: %s
JOBCTRL E59521 No units currently available
JOBCTRL E59522 Illegal units %s
JOBCTRL E59527 Job name not specified
JOBCTRL E59528 Job linking capable jobs only
JOBCTRL E59530 Job not currently linked
Maintenance and Troubleshooting Guide March 2008 113
JOBCTRL E59531 Invalid port for monitoring agents
JOBCTRL E59533 Warning: Operator already being transferred.
JOBCTRL E59534 Job1 %s not ready.
JOBCTRL E59535 Job2 %s not ready.
JOBCTRL E59539 Illegal change %s
JOBCTRL E59540 Headset ID (%s) already in use
JOBCTRL E59541 No more headsets permitted on system
JOBCTRL E59542 Failure to access headset table
JOBCTRL E59596 No operator slot available
JOBCTRL E59597 System is not running
JOBCTRL E59598 Illegal parameters
JOBCTRL E59599 Bad command
JOBCTRL E59600 Not a Cruise Control job
EVENTSERVER E61000 %s failed: Exception %s; Id %ul
EVENTSERVER E61001 Exception raised: %s
EVENTSERVER E61002 Failed to create thread
EVENTSERVER E61003 Caught unknown exception
EVENTSERVER E61004 Failed to write to IOR file %s
EVENTSERVER E61005 Failed to initialize signal handlers
EVENTSERVER E61006 Failed to initialize %d
EVENTSERVER E61007 attach_datashm () failed -- is system up?
EVENTSERVER E61008 Number of line pools defined in LINEASSIGN in master.cfg (%d) exceeds value of MAX_LINEASSIGN_LABELS (%d)
EVENTSERVER E61009 Exceeded max limit of inactive jobs (%d); skipping the rest
EVENTSERVER E61040 CosNaming NamingContext not found
EVENTSERVER E61041 CosNaming NamingContext cannot proceed
EVENTSERVER E61042 CosNaming NamingContext invalid name
EVENTSERVER E61043 CosNaming NamingContext already bound
114 Maintenance and Troubleshooting Guide March 2008
DCCS E62000 (%s): Operation %s is not implemented
DCCS E62001 (%s): Operation %s is not applicable to object %s
DCCS E62002 (%s): Requested column %s not available in table %s
DCCS E62003 (%s): Invalid predicate expression %s: %s
DCCS E62004 (%s): Invalid column name %s in predicate expression
DCCS E62005 (%s): Record %s is locked by owner %s
DCCS E62006 (add_lock): failed for Record %s Owner %s
DCCS E62007 (%s): lock for Record %s Owner %s is no longer valid
DCCS E62008 (%s): internal error - no data
DCCS E62009 (%s): no values for input
DCCS E62010 (%s): Operation %s requires %s
DCCS E62011 (%s): Operation %s: Invalid parameters
DCCS E62012 (%s): Record %s is not locked by owner %s, current owner is %s
DCCS E62013 (%s): Requested row %s not available in table %s
DCCS E62014 Unable to create file %s, errno = %d
DCCS E62015 Unable to open file %s for read/write, errno = %d
DCCS E62016 Unable to open file %s for update, errno = %d
DCCS E62017 Unable to open file %s for readonly, errno = %d
DCCS E62018 Unable to delete file %s, errno = %d
DCCS E62019 Unable to create file %s, file already exists
DCCS E62020 General Exception - Table: %s Method: %s
DCCS E62021 File %s does not exist, errno = %d
DCCS E62022 (%s): Operation %s requires Record ID as one of the query conditions
DCCS E62023 Incorrect Table Type
DCCS E62024 (%s): lock_record - Unknown locktype %s
DCCS E62025 (%s) [%#x] : %s(): Error %#x [%s] %s occurred
DCCS E62026 (%s) [%#x] : %s(): Error %#x %s occurred\n
Maintenance and Troubleshooting Guide March 2008 115
DCCS E62027 Platform Exception - Table: %s Method: %s
DCCS E62028 %s - Error allocating memory
DCCS E62029 (%s): Invalid Message Queue handle
DCCS E62030 (%s): Invalid agent name
DCCS E62031 (%s): Invalid headset ID
DCCS E62032 (%s): Failed to connect to shared memory
DCCS E62033 (%s): Failed to connect to agent %s shared memory
DCCS E62034 (%s): Agent %s is not active
DCCS E62035 (%s): Agent %s is already monitored by line %d
DCCS E62036 (%s): Failed to get IPC key for job: %s
DCCS E62037 (%s): Failed to open IPC for %s
DCCS E62038 (%s): Invalid message to notify agent(s)
DCCS E62039 (%s): Failed to connect to job %s shared memory
DCCS E62040 Lock expired for Record: %s, Owner: %s
DCCS E62041 Unable to fill required field %s for Job %s
DCCS E62042 (%s): Selection Index Failure: Could not verify selection %s with list %s. Run Verify Selection to find specific errors.
DCCS E62043 (%s): Invalid agent name selection pattern '%s'
DCCS E62044 (%s): Selection Index Failure: Could not verify strategy %s with list %s. Run Verify Strategy to find specific errors.
DCCS E62045 (%s): Shared memory object not associated with job: %s
DCCS E62046 Invalid parameters for setting %s
DCCS E62047 Number of Call Strategy Control items requested is greater than allowed on system
DCCS E62048 Requested value less than minimum value.
DCCS E62049 Unable to start job - job file in use by character user interface.
DCCS E62050 Unable to start job - lock on file failed.
DCCS E62051 Unable to start job - job file in use by %s
116 Maintenance and Troubleshooting Guide March 2008
DCCS E62052 File %s in use by character user interface.
DCCS E62053 Lock on file failed.
DCCS E62054 No response from Job Starter for %s
DCCS E62055 Invalid response from Job Starter for %s
DCCS E62056 Failed check for required fields due to lock on job file
DCCS E62057 (%s): Invalid index process handle
DCCS E62058 (%s): Unable to locate status for calling index process handle '%s'
DCCS E62059 (%s): Failed to send a notification to agent %s
DCCS E62060 Invalid file name: %s
DCCS E62061 (%s): Communication with remote list server failed when processing %s calling list and %s calling selection
DCCS E62062 (%s): Invalid Next Phone definition from phone %s to phone %s that creates infinite loop
DCCS E62070 %s(%d): Syntax error: %s
DCCS E62071 %s(%d): Error in command '%s': %s
DCCS E62072 Unknown variable name '%s'
DCCS E62073 Unexpected error in script definition
DCCS E62074 Total number of lines %d exceeds maximum allowed (must be %d or less)
DCCS E62075 Invalid field name '%s'
DCCS E62076 Invalid number of days %d
DCCS E62077 Invalid number of hours %d
DCCS E62078 Invalid number of minutes %d
DCCS E62079 Invalid audio message ID value %d
DCCS E62080 Invalid time interval value %d
DCCS E62081 Invalid relational operator '%s'
DCCS E62082 Invalid completion code keyword '%s'
DCCS E62083 (%s): Failed to initialize XML processor: %s
DCCS E62084 (%s): Failed to terminate XML processor: %s
Maintenance and Troubleshooting Guide March 2008 117
DCCS E62085 (%s): Failed to initialize XSLT processor: %s
DCCS E62086 (%s): Failed to terminate XSLT processor: %s
DCCS E62087 (%s): XML processing failed: %s
DCCS E62088 (%s): XML/DOM processing failed
DCCS E62089 (%s): XSLT processing failed: %s
DCCS E62090 Invalid element '%s'
DCCS E62091 (%s): Failed to compile XSLT stylesheet '%s'
DCCS E62092 Invalid label length '%s' (must be %d bytes or less)
DCCS E62093 Referenced label '%s' not defined
DCCS E62094 Command '%s' malformed
DCCS E62095 (%s) Operation %s:%s failed during validation
DCCS E62096 Duplicate label '%s' definition (first definition found in file %s, line %d)
DCCS E62097 File not open
DCCS E62098 Unable to seek to beginning of file
DCCS E62099 File %s is not a valid audio message file
DCCS E62100 Combined size of audio messages of %d kB (approx. %02d:%02d minutes) exceeds the total storage capacity %d kB (approx. %02d:%02d minutes) on PG230 board
DCCS E62101 Total number of audio messages %d exceeds the limit of %d messages
DCCS E62102 Referenced %s audio message not available on the system
DCCS E62103 Audio message ID %d exceeds the the limit of highest ID value %d
DCCS E62104 Using a reserved audio message ID %d
DCCS E62105 Invalid attribute keyword '%s'
DCCS E62106 Invalid attribute value '%s' for keyword '%s'
DCCS E62107 Cannot start monitor agent '%s' audio when on a shadow job
DCCS E62108 Cannot stop monitor agent '%s' audio when on a shadow job
118 Maintenance and Troubleshooting Guide March 2008
DCCS E62109 Cannot send a message to '%s' agent when on a shadow job
DCCS E62110 Cannot remove an agent '%s' when on a shadow job
DCCS E62111 Cannot transfer agent '%s' when on a shadow job
DCCS E62112 Record is already locked by current user '%s'
DCCS E62113 Record is not locked. Current user '%s'
DCCS E62114 Unknown lock state. Current user '%s'
CCS E63000 Unable to send a message to Dialer: %s Object: %s
AGENTAPI E70000 Incorrect number of arguments
AGENTAPI E70001 Incorrect message type
AGENTAPI E70002 Timed out waiting for %s
AGENTAPI E70003 Incorrect job type
AGENTAPI E70004 Command failed
AGENTAPI E70005 Incoming command exceeded maximum buffer size
AGENTAPI E70006 Must select unit
AGENTAPI E70007 Cannot transfer inbound call
AGENTAPI E70008 Must specify transfer job
AGENTAPI E70009 Unable to send message to %s
AGENTAPI E70010 Conference in progress
AGENTAPI E70011 Call blending is not available
AGENTAPI E70012 Password has expired
AGENTAPI E70013 Password can not be changed, change limit not expired
AGENTAPI E70014 Password can not be changed, password file locked
AGENTAPI E70015 Unable to become root privilege for setting password
AGENTAPI E70016 Original password is invalid
AGENTAPI E70017 New password entered is invalid
AGENTAPI E70018 IVR_SCRIPT is blank in job %s
AGENTAPI E70019 Job %s is not valid for IVR agents
HEALTHMON E72000 %s can't initialize signal handlers
Maintenance and Troubleshooting Guide March 2008 119
HEALTHMON E72010 %s server name AlreadyBound. ignored
HEALTHMON E72030 %s server name resolve CannotProceed
HEALTHMON E72040 %s server name resolve InvalidName
HEALTHMON E72050 %s Caught CORBA system exception: err=%s
HEALTHMON E72051 %s Caught CORBA exception: err=%s
HEALTHMON E72052 %s Caught CORBA TRANSIENT error.
HEALTHMON E72060 %s Caught unknown exception
HEALTHMON E72070 %s is NotFound
HEALTHMON E72080 failed to write %s IOR
HEALTHMON E72090 %s:: Caught LogOnOffError exception(%d, %s)
HEALTHMON E72100 function %s failed!
HEALTHMON E72110 failed to create %s!
HEALTHMON E72120 can not start activation, %s!
HEALTHMON E72130 failed on starting a %s thread.
HEALTHMON E72140 reqID=%d, failed to add request.
HEALTHMON E72150 failed to load %s.
HEALTHMON E72160 %s: failed on %s.
HEALTHMON E72170 reqID=%d, Failed to execute child process =%s. cmd=%s, errno=%d, ret=%d
HEALTHMON E72180 reqID=%d, Failed to start the service=%s
HEALTHMON E72190 reqID=%d, Caught DSAError.failed to stop the service=%d
HEALTHMON E72200 reqID=%d, Caught unknown exception. failed to stop the service=%d
HEALTHMON E72210 %s: reqID=%d, the reference no longer denotes an existing obj
HEALTHMON E72220 %s: reqID=%d, could not decide whether or not obj exists.
HEALTHMON E72230 %s: reqID=%d, failed on calling observer's Update method.
HEALTHMON E72240 %s: reqID=%d, cmd=%s, caught unknown exception. %s
120 Maintenance and Troubleshooting Guide March 2008
HEALTHMON E72250 %s: reqID=%d, Failed to %s. cmd=%s, errno=%d, ret=%d
HEALTHMON E72260 %s: Failed to convert from char to LocText
HEALTHMON E72270 %s: the event either is NOT found or is not supported or there is no info for the event.
HEALTHMON E72280 %s: Caught SubError. SubError is: errorID =%s, msg=%s.
HEALTHMON E72290 %s: input param ObserverIF_ptr is null.
HEALTHMON E72300 %s: Create error=%d on mailbox: %s
HEALTHMON E72310 %s: Create error on mailbox: %s
Maintenance and Troubleshooting Guide March 2008 121
Troubleshooting questions
The following sections each contain questions to ask the customer to help gather information for troubleshooting:
● Unable to start jobs
● List did not download
● Reports not working
● Call completion codes such as line Idle, busy, or hung up in queue, appears excessively
● Internet Monitor issues
● Changes affecting performance
● Agent key files
● Back ups
● Data pops (slow or none)
● Predictive Blend not acquiring
If further questioning is necessary, see Detailed troubleshooting questions.
For in depth problem solving on many issues, see Avaya Proactive Contact Troubleshooting.
Unable to start jobsTo help troubleshoot the issue, have the customer answer these questions:
1. What is the name of the job?
a. What is the start time of the job?
b. What is the stop time of the job?
c. Is the job an Inbound, Blend, or Outbound job?
2. What list is the job using to run?
3. What record selection are you using?
a. Was the record selection run?
b. How many records were selected?
4. What strategy are you using?
5. Where are you starting it? Have the customer try starting the job using both options:
122 Maintenance and Troubleshooting Guide March 2008
a. In Editor (GUI or windows point and click)
b. In Administrator (UNIX or telnet window)
6. What errors did you get?
7. Has the job ever worked? If so when was the last time it worked?
8. Have there been any changes to the job?
For further job troubleshooting help see Jobs.
List did not downloadTo help troubleshoot the issue, have the customer answer these questions:
1. What list did not download?
2. Has the customer tried to do a manual download?
3. Were there any errors?
a. If the download is stuck at time zoning, have the customer back out of all jobs that are running.
b. If they received the error "ERROR -- No Download Received", have the customer contact their host to see if the file was sent.
4. Has this list ever downloaded successfully?
a. If yes, when was the last time?
b. If no, did they create this list with "Supervisor"?
c. If yes, see Supervisor.
5. Is there any other list they can work off at this time?
a. If answer is yes, then the Severity is "1a Impaired".
b. If the answer is no, then the Severity is "0 Down" follow the routing steps located on page #8 of the Survival Guide.
For more troubleshooting help on lists, see Check list.
Maintenance and Troubleshooting Guide March 2008 123
Agent cannot connect- dialback failure - unable to login - headset in use
To help troubleshoot the issue, have the customer answer these questions:
1. How many agents are affected, and how many agents do you have?
a. What is the affected agent's log in?
b. Has the agent logged in successfully before?
c. Has anything changed on the workstations or network?
2. What is the error?
a. If the connection timed out, has the workstation ever connected?
b. If DBK failure, has anyone recently logged out of the system?
Reports not workingTo troubleshoot reports not working, have the customer select the reporting tool in use:
Analyst - GUI based reporting
PC Analysis - UNIX Based Reporting
Analyst - GUI based reportingIf the Analyst reporting tool is in use, have the customer answer these questions:
1. What version of Analyst are you using?
2. What version of Crystal Reports are you using?
3. What version of Excel are you using?
4. What report is not working?
a. Is it a standard report? (canned report)
b. Is it a custom report? (the customer modified a canned report)
5. Did you use auto conversion or manual conversion? If auto conversion, go to the next step. If not, go to step 7.
6. Did your auto conversion work?
124 Maintenance and Troubleshooting Guide March 2008
a. Is there another workstation that did convert records?
b. What time was it set for?
c. Do you have a screen saver, or low power standby on the monitor?
7. Did you run a manual conversion? If yes, then answer a,b,c. If no, go to step 8.
a. Did the screen turn yellow?
b. What error did they get? (At the bottom of the screen)
c. Has the PC been moved?
8. Has the IP address been changed?
9. When was the last time it worked?
PC Analysis - UNIX Based ReportingIf the PC Analysis reporting tool is in use, have the customer answer these questions:
1. a. Is this a new or existing extract?
2. b. What type of extract is it?
a. J - Job History
b. A - Agent History
c. I - Calling Info Statistics
d. T - Calling Trans Statistics
e. L - Calling List
3. What fields are you trying to extract information from?
4. What results are you getting?
5. Are you getting an error?
Call completion codes such as line Idle, busy, or hung up in queue, appears excessively
To help troubleshoot the issue, have the customer answer these questions:
1. What completion code?
2. Is it on all jobs?
3. When did the issue first start?
Maintenance and Troubleshooting Guide March 2008 125
Internet Monitor issuesTo help troubleshoot the issue, have the customer answer these questions:
1. Is the web server working?
2. Have you reset the web server workstation?
3. How do you know Internet Monitor is not working? Do you see errors? Is it not updating?
4. Are there any network issues?
5. Have there been any recent changes in the network topology?
6. Have there been any recent changes to the web server?
Changes affecting performanceTo help troubleshoot the issue, have the customer answer these questions concerning changes made to the system:
1. Where were changes made?
● Message Text
● Message Assignment
● Agent key files
● Calling list
● Upload/Download list
● Dialer event Scheduler
● Completion Codes
● Message Mapping
Message TextTo help troubleshoot the issue, have the customer answer these questions:
1. What was the message "Number"?
2. What was the message "File Name (AU)" (Be case sensitive)?
3. What was the message "Type"?. What is the "Music or Voice" setting?
126 Maintenance and Troubleshooting Guide March 2008
Message AssignmentTo help troubleshoot the issue, have the customer answer these questions:
1. What is the name of the script you created? It is case sensitive.
a. Is the name longer than seven characters?
2. What is the type of script you created?
a. Automated
b. Outbound
c. Inbound
d. Transfer
e. Virtual
Agent key filesTo help troubleshoot the issue, have the customer answer these questions:
1. What is the name of the keys file?
Calling listTo help troubleshoot the issue, have the customer answer these questions:
1. What is the name of the list?
2. What tab did you make changes to? Tabs listed below:
● Features
● Fields
● Prepare
● Update
● Custom
● Message Map
● Ordering
3. What change did you make?
Maintenance and Troubleshooting Guide March 2008 127
Upload/Download listTo help troubleshoot the issue, have the customer answer these questions:
1. What is the name of the list?
2. Did you add or delete fields? If so which fields were affected?
3. What type, Text, Number, Date, etc., of field was it?
4. What was the length of the field?
5. Did the field have any special formatting? If so which kind?
6. Did you refresh the calling list after making changes to the Upload/download?
7. Did you update the Structures and Method tabs?
Dialer event SchedulerTo help troubleshoot the issue, have the customer answer this question:
1. What changes did you make?
Completion CodesTo help troubleshoot the issue, have the customer answer this question:
1. What changes did you make?
Message MappingTo help troubleshoot the issue, have the customer answer this question:
1. What changes did you make?
Back upsTo help troubleshoot the issue, have the customer answer this question:
What kind of Back up?
a. An Avaya Proactive Contact system back up?
128 Maintenance and Troubleshooting Guide March 2008
b. A calling list back up?
c. A CDW backup?
Data pops (slow or none)To help troubleshoot the issue, have the customer answer these questions:
1. Can you send e-mail both internally and externally?
2. Are you having any known network issues?
3. Has your company been expanding the network?
Predictive Blend not acquiringTo help troubleshoot the issue, have the customer answer these questions:
1. What is the job name?
2. Can the agents log into the job?
3. How long have the agents been sitting idle?
4. What type of switch do you have?
Maintenance and Troubleshooting Guide March 2008 129
Detailed troubleshooting questions
This section covers scenarios with these areas of Avaya Proactive Contact troubleshooting:
● Networking Issues:
● Hardware troubleshooting
● Telephony & Switch Troubleshooting
● Software Issues
For other detailed troubleshooting help, see Avaya Proactive Contact Troubleshooting.
Networking Issues:
Question Result
Can you ping the CPU from the agent station?
No. There is no response from the CPU.
Can you ping an agent station from the CPU?
No. There is no response from the agent workstation.
Can you ping the switch from the CPU?
No. There is no response from the switch.
Run lanscan. Can you see the network interface?
No, cannot see the network interface of the CPU.
Can you ping the customer's default gateway from the CPU? (Defined as "route1" in the dialer hosts table)
IP Address does not connect.
Confirm network connectivity between the CPU and switch, check processes and look for 4 swif_mako processes running.
Determine that the swif_mako process is not running.
For CTI systems, check processes and look for one swif_dg process running.
Determine that the swif_dg process is not running.
130 Maintenance and Troubleshooting Guide March 2008
Hardware troubleshooting
General hardware issues
Run landiag. Do you see any errors?
There are errors in the network connection package level.
Ask the customer's network administrator for help in determining if there are other network connectivity problems at the site.
Question Result
Do any of the telephony cards have alarm lights on?
Red alarm lights are on.
On the front of the CPU is a small LCD panel. In the lower right of this panel is a small heart that alternates between an outline and a solid black heart. This heartbeat indicates that the HP operating system is functioning without any major errors.
When the heartbeat indicator is present, look elsewhere for a system fault.
Hard drive failure, the system does not boot. In boot administration, search for boot devices using the SEA command.
If no devices are found, the hard drive has most probably failed.
Are there any errors on the switch for telephony cards?
The switch error log has errors for telephony cards.
Does the Uninterruptible Power Supply have any red lights displayed?
Battery failure.
Maintenance and Troubleshooting Guide March 2008 131
Avaya CPU Issues
Digital Switch Issues
Question Result
On the front of the CPU is a small LCD panel. In the lower right of this panel is a small heart, which alternates between an outline and a solid black heart. This heartbeat indicates that the HP operating system is functioning without any major errors.
When the heartbeat indicator is present, look elsewhere for a system fault.
Can the customer connect through the console port rather than through the network.
The CPU does not boot up/cannot log into the console.
Is it possible to get into the CPU in Single-user mode and not in multi-user (normal) mode?
No. This indicates an operating system configuration problem.
Question Result
Are there any alarms on the Digital Switch subrack?
Yes. Review the troubleshooting information for the card causing the alarms and determine whether the card needs replacing.
Is there a diskette in the floppy drive?
Yes. The system will attempt to reboot from the floppy.
Can you log into the digital switch?
No, a message displays indicating that the connection was refused.
Can you view the switch menus on the console?
No. An error message displays indicating it could not connect.
Run ps -ef | grep swif_dg to verify if the digital switch is running properly.
If four instances of the swif_dg are not present, the switch is not properly connected to the CPU.
132 Maintenance and Troubleshooting Guide March 2008
Telephony Issues
Telephony & Switch Troubleshooting
Question Result
Look in the digital switch diagnostic menu to verify if the card alarm status is activated.
One of the cards in the digital switch subrack has an alarm light on it.
Are the T1/E1 spans down or out of sync?
Yes. This indicates problems with connectivity to the central office or PBX. Reseat problem T1/E1's. This can be done without restarting the switch. Follow the troubleshooting steps outlined for the cards in the switch subrack.
Are there excessive T1/E1 slips?
Yes. This indicates timing problems. Reseat problem T1/E1's. This can be done with the card cage and DSC running.
Where in the span is the switch timing coming from? Which span provides the switch timing? This information is found in the digital switch control menu.
Use the master timing selection from the Card Maintenance menu to verify the switch timing. Change the timing to another card, if available.
Is the switch software up but all the cards are in an alarm state?
Yes. Shut down digital switch console and card cage first and then power down and reseat the ENBC card.
Note:Note: You must shut down the digital switch (and
Avaya PDS) before doing this!
Problem Probable Cause Corrective Action
Agent has data but no audio.
The agent entered a valid keycode that belongs to another agent's headset when logging into the Avaya Proactive Contact. This only applies to network- attached headsets.
Have agent log out, then log in again. Verify the agent's headset ID by looking at the opmon.cfg, dgswitch.cfg, and hidfile files.
Maintenance and Troubleshooting Guide March 2008 133
Messages not playing in hold queue.
Messages are not installed on the digital switch controller.
Verify messages are installed by using the Disk Utilities menu to list the C:/ directory on the digital switch controller. If necessary, reinstall the messages.
Failure of NFS mount after nightly reboot.
Log into the switch and remount NFS. Then rerun msg_loader, and test.
LPVC card is poorly seated or defective.
Check status of LPVC from Card Maintenance screen on switch. If the card is not in Status A (active) reseat it. If this fails, replace card.
Digital switch SCSI cable is poorly seated or defective
Inspect and re-seat the cable.
Customer selected wrong start script label for job.
Check the RUNCALL parameter to find the start script label being used for the job. Then check telephny.spt to find the functionality of the start script label. Verify with the customer that the functionality is what they expected.
Changes in Supervisor. Discuss changes with customer, investigate possible problems.
Wrong message name in voicemsg.cfg on Avaya Proactive Contact CPU. Example: fwait1 when message file is named f_wait1
Verify that the message filenames in job parameters match those in the voicemsg.cfg.
An agent entered the wrong telephone extension at the Enter Key Code prompt. Affects one workstation only.
Have the agent log out, then log in again. Verify the agent enters the telephone extension correctly. Verify the number is valid by looking at the opmon.cfg file.
134 Maintenance and Troubleshooting Guide March 2008
Change to or failure of customer's telephone network. For example, the customer reprograms the ACD in the network. A T1/E1 span in the customer's telephone network is down. These causes affect multiple workstations.
Try to re-establish the connection by resetting the trunk port interface card. Try to re-establish the connection by resetting the digital switch. Ask the customer to test and fix the suspect trunk.
Other. Isolate the problem by looking for error messages in the log files on the Avaya Proactive Contact CPU and digital switch. For example, digital switch system log file messages might indicate an interface port card for headsets is out of service, indicating the card needs resetting, re-seating, or replacing.
Workstation(s) with dial-back headsets display DIALBACK ATTEMPT FAILED.
A T1/E1 card has lost synchronization with the incoming data stream This condition is typically due to the customer losing service from the Central Office or PBX, or due to the customer changing class of service at the Central Office or PBX.
Note:Note:
The loss of carrier typically forces the T1/E1 card out of service. Requiring that you reset it to re- establish T1/E1 communication.
Confirm diagnosis by looking at the sync source in the Master Timing Link Selection screen. T1/E1 cards default to internal sync if incoming sync is lost. Re-establish incoming sync from the Master Timing Link Selection screen. If the T1/E1 card is out of service, which is typical, reset the card by re-seating it or by changing its status, or reset the digital switch. If the T1/E1 span is down, ask the customer to fix it.
A T1/E1 card is poorly seated or defective. This is rare.
Look for alarms in System Alarm or Card Alarm screens The alarm my be T1/E1 remote out of frame or T1/PRI, E1/PRI card failure. Re-seat or replace the card.
Maintenance and Troubleshooting Guide March 2008 135
Ground-start T1/E1 trunk(s) connected to a Central Office that is having channel bank problems. Will see issue with individual lines, not the whole T1/E1 span.
Have customer call their CO representative to verify the problem and request assistance.
NO DIAL TONE appears on Phone Line Usage or Line Usage screen for some or all T1/E1 trunks; excessive (>100) out- of-frame errors seen in the Card Display screen.
PBX or Central Office has taken out a telephone trunk by failing to hang up, usually due to a signaling error. Service from the Central Office or PBX has been lost for some other reason. The customer has changed telephone wiring. The trunk ports are incorrectly configured in the digital switch menu system.
Verify which ports are affected by looking at portcorr phone line report or Job Monitor Port Display. Look at the Port Display screen in the digital switch menu system. If a port is stuck in the CP_DISC state, clear the trunk by resetting the port from the Card Maintenance screen or by re- seating the corresponding port interface card. Test the trunk with the breakout box or the Driver program. If the trunk is bad, ask the customer to fix it.
A T1/E1 card has lost the incoming data stream. Typically a T1/E1 span is down.
Verify the diagnosis by looking for "Remote Carrier" or "T1/E1 Carrier" alarm messages in the digital switch log file or by looking at the Card Maintenance screen. T1/E1 cards that have lost carrier switch to Maintenance status. Ask the customer to test and fix the T1/E1 span.
NO DIAL TONE appears on Phone Line Usage or Line Usage screen for one or two trunks (typical). A value of 5% or less for this is normal.
The PBX or Central Office failed to hang up due to a signaling error.
You can sometimes fix the problem by resetting the port. Or, ask the customer to reset the trunk at the PBX or Central Office.
NO DIAL TONE appears on Phone Line Usage or Line Usage screen for a large number of trunks to T1/E1 cards.
The ear or mouth gain for the headset has been set to 0 This only occurs on 4-wire OLIC connections.
Check the ear and mouth gain for the headset port on the digital switch.
136 Maintenance and Troubleshooting Guide March 2008
The headset is bad. Swap with a known-good headset.
A trunk is stuck at Line Available on the Phone Line Usage screen or Line Usage screen.
Voice cable or OLIC card is bad.
While headsets are not in use, disconnect cables from OLIC. Reset the OLIC card. If alarms clear, then the problem is in the cabling. If you still have failed OLIC ports with no cables attached, then the replace the OLIC card. Also, try swapping OLIC cables. If the problem follows the cable, then the issue is wiring. If the problem stays with the OLIC port, then replace the OLIC card.
A direct-connect headset is dead.
Wrong headset type is configured on OLIC card
Headsets which plug into an adapter box (2-wire headset to 4-wire connection), sometimes called an M10 box, should be configured as "CARBON" on OLIC card. Headsets without this adapter are configured as "ELECTRET"
Avaya Proactive Contact CPU was not rebooted after the digital switch was reset.
Reboot the Avaya Proactive Contact CPU.
Ziptone messages are not download to LVPC.
Verify status of LPVC is "A" for Active on switch. Verify NFS is "mounted." Ask if all agents have this problem, or if it is intermittent. If intermittent, test the LPVC.
A direct-connect headset has poor sound quality.
Network issues. Run landiag to check for network issues, verify transceiver is functioning.
Agents don't hear ziptones.
LPVC card is poorly seated or failing.
Check the status of LPVC from Card Maintenance screen on switch. If card is not in status A (active), reseat. If this fails, replace the card.
Maintenance and Troubleshooting Guide March 2008 137
Software Issues
General software issues
Mid-Tier Services Issues
Question Result
What feature(s) aren't working?
This question helps narrow down the issue.
If the Agent API is in use, can an agent successfully telnet to the dialer and receive?
If the agent can telnet to the dialer this indicates problems with the API specifically and rules out job operation issues.
Are all Avaya Proactive Contact processes running? Run check_pds.
Look for errors in the log files (check_errors).
Is Supervisor software working?
No. This would indicate a Mid-Tier services failure.
Are the Mid-Tier processes running? Run check_mts.
The Mid-Tier process is down. Run a stop_mts and a start_mts to reset the Mid-Tier services.
Run check_errors and look for issues with the Mid-Tier.
Results in a list of errors collected by the log files on a given day between specified hours.
138 Maintenance and Troubleshooting Guide March 2008
Supervisor
Database Services
Question Result
Is Supervisor software working?
No. This could indicate a Mid-Tier services failure.
Run a check_mts to find out if the Mid-Tier services are running.
Not running, run a stop_mts and a start_mts to reset the Mid-Tier services.
Was Supervisor software installed properly? (The Mid-Tier systems must be installed prior to installing Supervisor.)
No. Must reinstall the software in the proper order.
Is Supervisor configured correctly through the Configurator Tool?
Configurator lists the correct network information for the Avaya Proactive Contact components.
Is the dialer's IP address resolvable on the network (hosts file or in DNS)?
No. Correct the IP address in the associated file.
Can you ping from the Supervisor workstation to the dialer or ping the workstation from the dialer?
No. This is a network issue.
Symptom Remedy
Verify that the dialer and Mid-Tier processes are running, including HDSC and HDCC.
● check_pds (dialer)● check_mts (Mid-Tier server)
Verify that the database is running.
check_db (dialer)
To verify that the HDCC is running and writing data to the database
check_mts (Mid-Tier server)
Maintenance and Troubleshooting Guide March 2008 139
Verify that there is historical data available on the target dialer.
List the contents of the /opt/avaya/pds/lists/history/datastore.● Ensure there is a directory corresponding to the current
date.● List the contents of the directory corresponding to the
current date.● Verify there is an event_store.data file in this directory and
ensure that it is the current date.● Verify the data manager process is running (do a
check_pds).● Execute the dataclient test program to verify that the
event_store.data file contains valid data by typing at the command prompt:dataclient -d mmddyyyy
A job is running and agents are logged in on one or more dialers but a report executed from Analyst shows no data for that job.
● Verify that the database is running.● Verify that the HDCC is running and writing data to the
database.● Check to see if data for this job is being populated into the
tables.● If the tables are populated, then consult the
troubleshooting guide for Analyst.
A job is running and agents are logged in to one or more dialers but the historical data tables are not being populated with data for a specific job.
● Verify that the database is running.● Verify that the HDCC is running and writing data to the
database.● Check the Mid-Tier log for HDCC error messages.● Verify that the HDSC is running.● Verify that there is historical data available on the dialer.● Verify that there is only one HDCC process running on the
Mid-Tier server.
The HDCC is not running, or fails to stay up after being restarted.
● Verify that the Logger and Service Monitor are running.● Verify that the database is running.● Check the Mid-Tier log for HDCC error messages● Verify that the HDSC is running. Run a check_mts and
ensure that the HDSC is visible in the naming service.● Stop the HDCC and execute it from the command line.
Observe the output.
Historical data is incomplete.
● Ensure that the job has completed before running report.● Check the mid tier log for HDCC error messages.
140 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 141
Avaya Proactive Contact Troubleshooting
Troubleshooting strategies for these areas of functionality are covered here:
● Verify software is running
● CORBA services
● CCS
● DCCS
● Jobs
● CTI
● StatsPump
● Mid-Tier Database
● Mid-Tier Data Services
● Dialer Mid-Tier connectivity
● Historical Data Server Component
● Database
● End user applications
Verify software is runningTo verify that the Avaya Proactive Contact is running correctly:
1. Identify errors by checking the log files:
tail -f /opt/avaya/pds/account/mid_tier_log.<ccyymmdd>tail -f /opt/avaya/pds/account/account.<ccyymmdd>
2. Verify proper functionality of MTS by running check_mts. The system displays the following message:
>>> All processes running!
3. Verify system proper functionality by running check_pds. The system displays the following message:
>>> All processes running!
142 Maintenance and Troubleshooting Guide March 2008
4. Verify proper functionality of database by running check_db. The system displays the following message:
>>> All processes running!
CORBA servicesThere are two common errors with CORBA services:
● The nsls script fails to list names in Naming_Service.
● Some services fail to start.
nsls script fails to list names in Naming_ServiceTry the following to correct the problem:
1. Check that the NAMESERVICEHOST keyword in $VOICEDIR/etc/master.cfg is set to the correct value.
2. If the NAMESERVICEHOST keyword value is incorrect, replace the value with the correct value and rerun nsls. If the nsls script still fails to list names in Naming_Service, go to the next step.
3. Go to Mid-Tier dialer and run check_mts to make sure all the mts services are running. If the check_mts script does not display All processes are running!, the script lists any processes that are not running.
4. Start any process the check_mts script reports is missing following the instructions for starting that process in Avaya Procative Contact Software Reference.
Some services fail to startTry the following to correct the problem:
1. Some services such as serviceAct and serviceMonitor require logger to be running. Make sure both logger and serviceMonitor, also a requirement for some services, are both running using Health Manager, Middle-Tier Services > All.
2. If either logger of serviceMonitor is not running, right click in the Middle-Tier Services:All window and click Stop All Midtier Services.
3. Right click in the Middle-Tier Services:All window and click Start All Midtier Services.
Maintenance and Troubleshooting Guide March 2008 143
Sales Verification testingFollow these steps to set up the Sales Verification feature test:
1. Install the Sales Verification feature.
2. Edit the list#.prep file to include this line:
EXECPROG:callconn:5 list1 verify1 verify1
which uses this syntax for callconn:
callconn <interval> list<num> <select name> <job name>
Follow these steps to test the Sales Verification feature:
1. Enter hostpds list1 at the command prompt.
2. To run callsel for an outbound job, enter callsel at the command prompt.
CCSCommand and control service (CCS) is Mid-Tier server deployed on the primary dialer system which in collaboration with DCCS provides a unified multi-dialer command and control ability. CSS maintains one DCCS connection for each dialer.
CCS not runningIf CCS is not running, follow these steps to correct the problem:
1. Enter ps -e at the command prompt to verify that Naming_Service, Logger and ServiceMonitor are all running.
2. If any of these processes is not running, following the instructions for starting that process in Avaya Procative Contact Software Reference.
3. If CCS is still not running, the wrong Naming_Service may be in use by this set of Mid-Tier services. Run nsls multiple times and make sure the results are identical.
4. If the results are not identical, more than one Naming_Service has been started on the same multicast port. Make sure each system uses it own unique NameServicePort.
5. Run mtsconfigure and start_mts following the instructions for starting these scripts in Avaya Procative Contact Software Reference.
144 Maintenance and Troubleshooting Guide March 2008
CCS not passing requests to DCCS serverIf CSS is not passing requests to the DCCS server, examine the $VOICEDIR/account/mid_tier_log.ccyymmdd file to see if it contains any errors concerning DCCS.
DCCSThe Dialer Command and Control (DCCS) may have issues that result in processing errors, CORBA problems, or crashes. This section covers those issues and more general DCCS troubleshooting techniques.
DCCS processing errorsProcessing errors for DCCS are logged in the general account log file, $VOICEDIR/account/account.<ccyymmdd>. The prefix DCCS identifies DCCS entries in the log. All error messages must be looked at in context and so a DCCS error message does not necessarily imply a problem with DCCS.
DCCS and Corba problemsAlthough DCCS does not trace CORBA level calls, the $VOICEDIR/account/mid_tier_log.<ccyymmdd> file can provide clues about DCCS CORBA level operations. The CCS component produces this file and logs in detail each CORBA level interface call. Since the CCS CORBA interface maps practically one-to-one with the DCCS CORBA interface, the log file enables you to determine operations that were executed at or around the time of a DCCS error such as a crash.
DCCS crashesThe $TAO_DATA/dccs_log file captures the STDOUT and STDERR. This log file accumulates reports from multiple DCCS runs as each run�s data is appended to the end of the file. The contents of this file are cleared daily by one of the maintenance scripts.
The dccs_log file is usually the very first indicator of a DCCS crash. All kinds of crashes report at least a brief message to STDERR so this file can give a clue as to what was the reason for a crash. The STDERR messages include the SIGTERM (signal #15) which is normally used to stop DCCS, so that entry can be ignored.
Maintenance and Troubleshooting Guide March 2008 145
Note:Note: Consequently, by counting the number of these messages, Entering Sig
Handler: 15, using a command like this on a HP-UX cmd-prompt:
$ grep 'Entering Sig Handler: 15' $TAO_DATA/dccs_logfile | wc -l
You should always get the numbers of DCCS terminations that day.
DCCS general troubleshootingA trace file and unit testing can be great aids in troubleshooting DCCS problems.
Isolating DCCS problems
To determine if a problem is with DCCS or a connection issue, run DCCS with the -s, simulation option, on the command line. In this mode, any call to the DCCS returns "junk" data. This test verifies that a connection to the server is established without exercising the server's actual data retrieval functionality. If the server does not return any data, the problem is probably a connection issue and is not related to CORBA and its services.
DCCS trace file
The standard DCCS binary supports the creation of a trace file by running the binary with a -d option. Running the binary with the -d option creates a detailed debug trace file, /tmp/dccserverf.dbg.
DCCS unit testing
The dcctest tool, fully documented in the Avaya Proactive Contact Software Reference Binaries, may help isolate problems. The tool uses an XML input file and generates output to the screen and to an XML file.
The directory /opt/avaya/pds/tools/xml contains a Readme file, the dcclient.dtd file needed by dcctest, and sample xml files used by dcctest. The xml files are in sub directories. The names of the directories correspond to the "tables" in dccserver.
You can also use the md_callsel binary to help solve problems involving DCCS and the way it does remote Selection Index processing. md_callsel is a simple cmd-line tool that can exercise the request for a remote processing the same way the DCCS does it.
Use this syntax for md_callsel on the command line:
md_callsel <hostname-list_name #1> <selection_name #1> [<hostname-list_name #2> <selection_name #2>] ... [options_string]
146 Maintenance and Troubleshooting Guide March 2008
Using this tool helps narrow down the scope of the problem. If the command line above returns the expected results it means that the problem must be with DCCS itself and/or any of the DCCS clients (CCS or CCBridge or the front-end clients). If the command line above fails, the problem is somewhere in the libdsi.a library, specifically the claccesss.c and clcallsel.c and the listserver on the remote machine.
JobsThis section describes several job troubleshooting processes. They include:
● Using Test Mode
● Job will not start
● Jobs ends just after start
● Invalid headset ID
● Agent profile will not execute
● Selection list Unavailable for use
● Job in test mode ignores keystrokes
Using Test ModeSeveral job troubleshooting scenarios require you to put the system in test mode. This section describes how to set up test mode.
Set up call processing in test mode
To set up call processing in test mode, make the following changes to the system configuration:
1. In the /opt/avaya/pds/etc/master.cfg file, set the SWITCHTESTMODE parameter to YES.
2. In the /opt/avaya/pds/config/opmon.cfg file, set the DEDHEAD parameter to DEDHEAD:1-48,1 to define the dedicated agent headset ID number range used for testing purposes.
3. In the /opt/avaya/pds/job/outbnd.job file, set the TESTMODE parameter to:
TESTMODE:VOICE=40 BUSY=20 NOANSWER=20 AUTOVOICE=20:This setting defines the completion code distribution in the test call processing mode.
Maintenance and Troubleshooting Guide March 2008 147
Set up calling list processing
To prepare the default list1 calling list for use:
1. Type createlist -A <Calling list application name>. The system displays a message like this:
Put Data Onto System
Number of records processed - 501
This generates the /opt/avaya/pds/xfer/clist/list1.
2. Type list_prep list1. The system displays a message like this: CALLING LIST BEING PREPARED FOR CALLING# RETAINING CALL COMPLETION STATUS
latelst - Failed to open file list1.oldmv: /opt/avaya/pds/xfer/clist/list1.old.late: cannot access: No such file or directoryE00515|latemrk - Failed to open file list1.lateENTERING TIME ZONES
Setzones - 501 records processed from list list1 - 426 records successfully processed - 75 records failed with bad phone numbers - 0 records failed time zone lookup - 0 records failed with status of 'deleted'REMOVING DUPLICATE RECORDS
Reject - Found 0 duplicates and 0 special exceptions in calling list list1HASHING THE CALLING LISTclhash - Successful processing for list 'list1' field 'ACCTNUM' 501 recordsHASHING THE CALLING LIST FOR DO NOT CALLclhash - Successful processing for list 'list1' field 'ACCTNUM' 501 recordsMARK RECORDS WITH DAYS ON PROACTIVE CONTACT GREATER THAN 5OOPSchkentdt - Processed 501 records on list: list1 with 0 records deletedREJECTED ACCOUNTSREJECTED ACCOUNTSCALLING LIST PREPARED FOR CALLING - list1Type chkentdt list1 ACCTNUM d=5 w=5. The system displays a message like this:OOPSchkentdt - Processed 501 records on list: list1 with 0 records deletedType callsel -l list1 -s all -x -p. The system displays a message like this:
CALL SELECTION
148 Maintenance and Troubleshooting Guide March 2008
Selection List Generation
Records processed 501 Total records 501
398 records selected and 0 recalls
Writing Selection List Index #1
Generating Report File 11876
Job will not startCheck the job guard times, STARTTIME and STOPTIME, in the .job file and adjust the values as necessary to fix this problem.
Jobs ends just after startIf when you start a job, its ends abruptly after a few seconds, check the following to troubleshoot this issue:
1. Are timezone codes for each phone number classified in the calling list? If not, correct the timezone codes for phone numbers and restart the job.
2. Check to see that there are uncalled records in the calling list. If there are no uncalled records, either obtain a fresh list or reset list to an uncalled state. Enter this command at the command prompt to reset the list:
set_field list1 STATUSFLAG CODE DTE TME.
3. Check the timezone report in config_ed to see if you are attempting to call within the timezone guard times of at least some of the records in your list.
Note:Note: If you need to modify timezone.cfg, you must re-run your callsel for the new
times to take effect.
Maintenance and Troubleshooting Guide March 2008 149
Invalid headset IDIn test mode, you try to log on an Agent and get the error message, Invalid headset ID. Try the following to correct the problem:
1. It may be that the system is not in testmode. Check that the SWITCHTESTMODE keyword in $VOICEDIR/etc/master.cfg is to YES.
2. If the error persists, check that these keywords in $VOICEDIR/config/opmon.cfg have the listed values:
● CFGTIME:15
● DEDHEAD:1-48,1
● #DIALBACK:49-96:15:0::
● #DIALBACKNUM:ALL
● DIALINTIMEOUT:30
3. If the values in opmon.cfg are correct and the error still occurs, check that PORTS keyword value in $VOICEDIR/etc/master.cfg matches the DEDEAD keyword value in $VOICEDIR/config/opmon.cfg. If they do not match, make them have the same value.
4. If the error is still there, check that the number of headsets in $VOICEDIR/config/dgswitch.cfg matches the value for the keyword, PORTS in $VOICEDIR/etc/master.cfg.
5. If you made any changes to parameters, reboot Avaya Proactive Contact.
Agent profile will not executeIf when agents log in, their .profile will not execute:
1. Make sure that the agent's .profile is soft-linked to /etc/skel/pds_agent/.profile. The /etc directory must have correct ownership and permissions or the agent may not have permission to run it.
2. If agents still have problems with their .profiles, try logging in as root and running $VOICEDIR/tools/shell/sysverify. This tool checks to see whether all dialer files, ownerships and permissions are present and correct. sysverify -f corrects any permission or ownership problems. Use the -f option only as a last resort.
150 Maintenance and Troubleshooting Guide March 2008
Selection list Unavailable for useWhen you try to start a job, you get the message Selection list unavailable for use. There are two possible causes of this error:
1. Jobs may be trying to use the same .S file. Check that each currently running job is accessing its own .S file.
2. If a job (or caller) aborted prematurely, it did not do its cleanup steps.
Note:Note: Only perform these steps as a last resort. These steps remove all current job files.
To do the clean up manually, first stop all jobs. Then, at the command prompt, enter:
● cd $VOICEDIR/lists
● rm *.inx *.rcl *.sel *.stgy *.stat *.as *.recsel stat.*
Rerun callsel before trying to start the job again.
Job in test mode ignores keystrokesWhen running a job in test mode, the system ignores keystrokes to the agent CUI window. For inbound and outbound agents in test mode, if you want to interact manually with the agent CUI, set the <jobname>.job TESTOPER parameter to an empty string.
General Job troubleshooting● Check job parameters
● Check list
Maintenance and Troubleshooting Guide March 2008 151
Check job parameters
In the /opt/avaya/pds/job/<job_name>.job file you wish to run, check the following keywords:
Check list
To make sure the list you intend to use for testing exists, check the /opt/avaya/pds/xfer/clist directory for it. If it is not present or if you just need a small sample list to test with, you can generate one with the readtape command as follows:
1. On the same system as the clist directory, type:
readtape -c hg_in1 -d lt_in1 -olist_prep list1
Keyword Value Description
LIST: hula:list1 Indicates the name of the calling list to use for the job.
SELECT: all Indicates the record selection (*.S) filename.
STARTTIME: 08.00: Earliest start time for a job in 24-hour format hh.mm. Set to 00.01 for night-owl/early-bird testers.
STOPTIME: 23.00: Latest stop time for a job in 24-hour format hh.mm. Set to 23.59 for night-owl/early-bird testers.
TESTMODE: Indicates the distribution of call completion code results required in test mode. Percentages must equal 100.
VOICE Set to 100 for manual calling. 40 is the default value for test mode.
BUSY 20 is the default value for test mode.
NOANSWER 20 is the default value for test mode.
AUTOVOICE 20 is the default value for test mode.
TESTOPER: <talktime= sec>, <updtime=sec>
Leave blank for manual calling. Indicates the number of seconds agents are allowed for talk time <talktime> and update time <updtime>. Set both values to 5 for test mode.
152 Maintenance and Troubleshooting Guide March 2008
2. The first time the list is used run setzones, to classify the time zone of each phone number, type:
setzones list13. Run callsel to set up an index with pointers to selected records:
callsel -l list1 -s all -x -p [-u]where -x means skip manual configuration, use as is (if possible)
-p means print results to /tmp/reports
-u unit work lists active (for unit work list jobs)
-s defines the strategy file, /opt/avaya/pds/callsel/all.S
-l defines the calling list, /opt/avaya/pds/xfer/clist/list1
CTIThe topics of CTI troubleshooting covered are:
● Installation: Verify CTI link
● CTO OAM Utilities
● CTI Troubleshooting
● Troubleshooting tips for Avaya CTI
Installation: Verify CTI link To verify the CTI link you need to check the state of Avaya CT or Application Enablement Services (AES).
Maintenance and Troubleshooting Guide March 2008 153
Avaya CT
Follow these steps to verify the CTI link:
1. Go to the server that is running Avaya CT 1.x and start the TS Controller by entering Start > All Programs > Avaya Telephony Computer > TS Controller that displays this dialog box:
The Telephony Services State text box should contain the word RUNNING which verifies that Avaya CT is running.
154 Maintenance and Troubleshooting Guide March 2008
2. To check that a call can be made through Avaya CT, go to the server that is running Avaya CT 1.x and start TS Test by selecting Start > Al Programs > Avaya Telephony Computer > TS Win32 Client > TS Test to display this dialog box:
3. In the TSTest Telephony Services Test Application dialog box fill in the Server, User, and Password text boxes with dialer values found in the swif_ct.cfg and cti_passwd.cfg files.
4. In the TSTest Telephony Services Test Application dialog box fill the From and To text boxes with real extensions on the PBX.
5. Click Dial to run the test.
6. If the test is successful, the test displays a message box with this content:
Call successfully originated. Dismiss this message box to terminate call.7. If the test is unsuccessful, verify that the extensions used for To and From are working by
placing a call from them using a hard phone. If either of these calls fail, there is a line problem with the extension that failed.
8. If these calls are successful, then there is a problem with either the configuration of Avaya CT Server, the CTI Link, or on the Avaya PBX.
9. To troubleshoot these errors, inspect the error logs on the server that is running Avaya CT 1.x by selecting Start > All Programs > Avaya Telephony Computer > Error Log.
Maintenance and Troubleshooting Guide March 2008 155
AES
To verify that the AES process is running:
1. Log in to CTI OAM Admin to display the Operations, Administration and Maintenance (OAM) home page.
2. From the main menu, select CTI OAM Admin to display the CTI OAM home page:
On this screen check that all the services have a Controller Status of Running.
156 Maintenance and Troubleshooting Guide March 2008
3. To view the connection state, select Status and Control > Switch Conn Summary to display this screen:
The entry for the Conn Stat column should be Talking.
Maintenance and Troubleshooting Guide March 2008 157
CTO OAM UtilitiesThe CTI OAM home page also provides access to Utilities. To access the utilities, select Utilities from the main menu to display this screen:
ASAI Test
Use the ASAI Test page to determine if the AE Server is communicating with Communication Manager.
Ping Host
Use the Ping Host page to determine if the hostname or IP address you specify exists and is accepting requests.
TSAPI Test
Use the TSAPI page to place a test phone call.
158 Maintenance and Troubleshooting Guide March 2008
CTI TroubleshootingThis section includes a discussion of Testmode, Debugging logs and some general troubleshooting techniques for Avaya CTI.
Testmode
Use testmode to test the CTI configuration, but not the switch. It is particularly useful for use before the CTI Link and PBX are ready for test. Since testmode does not work with Avaya Proactive Contact with CTI, you must change the configuration slightly to use testmode. Make these changes:
Restart the dialer.
Debugging logs
There are three logs that can be used for solving problems with swif_ct and its functionality:
● switch_log.ccyymmdd
● cti.dbg
● swif_ct.dbg
The switch_log.ccyymmdd is always available on a running dialer in the /opt/avaya/pds/account directory. The contents of this file include such events as start, link down, link up and errors.
The cti.dbg file is a log of all the messages flowing between swif_ct and the CTI Link. To create this log file, set this environment variable in the /opt/avaya/pds/scripts/pdscontrol file:
export CSTATRACE=/opt/avaya/pds/account/cti.dbg
Make sure the line above is close to the beginning of the file. The directory and file name can be any valid directory and file name, although the account directory contains several other logs, so it is an easily remembered choice. Since this file can grow quite large, use it only during a debug session, not for normal use.
File Keyword Value
master.cfg SWITCHTESTMODE YES
master.cfg SWITCHTYPE DIGITAL
opmon.cfg DEDHEAD 1-48,1
Maintenance and Troubleshooting Guide March 2008 159
The swif_ct.dbg file cannot be created by the standard swif_ct binary, but requires a special debug version of the binary to create it. If a debug version is available, make a copy of the original swif_ct file and put in it in a safe place. Overwrite the original swif_ct with the debug version. To have the debug version create the swif_ct.dbg file, add this line near the start of the /opt/avaya/pds/scripts/pdscontrol file:
export SWIFDEBUG=1,10-31:timestamp
Restart the dialer. Every time swif_ct is restarted, the swif_ct.dbg file, located in the /tmp directory is overwritten.
Troubleshooting tips for Avaya CTIThis section contains a small set of troubleshooting tips for Avaya CTI.
driver_ct
Use driver_ct, a CTI test tool, to send messages to swif_ct as if the messages were coming from opmon or porter. The tool reports the messages back from swif_ct and is useful for verifying functionality from swif_ct through the switch to the end station. See the Driver_ct User Guide, CID 113850, for more information on driver_ct.
Managed job without CPA issues
There are four different scenarios that can cause problems with managed jobs:
1. If the system is using Make Predictive Call instead of Make Call, make this change:
● Set the VISUAL_CPA keyword in master.cfg to NO.
● Do not use with Agent, only with the Agent API such as PDS Agent.
2. If the system appears to be working because pop screens appear, but agents are not making calls, the system may be in testmode. See Testmode for details on testmode.
3. Problem with "operator" can occur when an agent logs in, puts in extension and agent type, and the error message Invalid headset displays. To correct this error:
● Run check_pds to assure that the swif_ct process is running. If the swif_ct process is not running, it can cause the error message.
● If the swif_ct process is not running, check the switch_log to determine the reason it is not running.
4. With PDS Agent, when the agent clicks OK on the login screen, the error message Unable to open channel to agent monitor process displays.
● This error message occurs when swif_ct is not running. Run check_pds to assure that the swif_ct process is running.
160 Maintenance and Troubleshooting Guide March 2008
● If the swif_ct process is not running, check the switch_log to determine the reason it is not running.
Predictive calls troubleshooting
Sometimes with predictive calls, an agent can generate pop screens, but has no audio call. This often results in error messages in the switch log such as:
● Unknow!2005/10/21!17.08.55!(type=0,severity=3,subsys=6) Swif_ct: E48015: No Call for Route Request: RegReqID?=1, CrossRefID? = 283, CallID?=709
● Unknow!2005/10/21!17.09.55!(type=0,severity=3,subsys=6) Swif_ct: E48027: Route End Error: RegReqID?=1, CrossRefID?=283, Error = 52
Resolves these errors by setting the Universal Call ID in the PBX to Yes.
StatsPumpStatspump consists of the statsPumpCtrl process and statspump java process.
Follow these steps to troubleshoot statspump:
1. Check that statspump is running by entering check_mts at the command prompt.
2. If statsPumpCtrl does not display in the results for check_mts, most likely statsPumpCtrl has not started. Run check_mts again to make sure serviceMonitor and Naming_Service are running.
3. If either these two processes are not running, follow the instructions for starting that process in Avaya Procative Contact Software Reference.
4. Check that statspump is running by entering check_mts at the command prompt. If it is still not running, go to the next step.
5. Reconfigure the system by following these steps:
a. Check the keyword values in $VOICEDIR/etc/master.cfg to ensure they are set correctly. Edit the file to correct any mistakes.
b. Enter stop_pds and then stop_mts at the command prompt.
c. Delete all files in the /opt/avaya/services/data directory.
d. Enter start_mts and then start_pds at the command prompt.
e. Enter check_mts at the command prompt and inspect the results to ensure that statsPumpCtrl is running.
Maintenance and Troubleshooting Guide March 2008 161
Mid-Tier DatabaseTwo common problems with the Mid-Tier database are networking issues that prevent access to the database and in some cases the database process is not running. The next two sections provide guidance on resolving these issues.
Mid-Tier database network problemsIf you suspect the Mid-Tier database is not available on the network, follow these steps to troubleshoot the problem:
1. From the command prompt, ping the host system for the database using the IP address of the host system.
2. If the ping is successful, go to Mid-Tier database not running.
3. If the ping is unsuccessful, check that the /etc/resolv.conf file contains the line:
domain <domain name>
4. If /etc/resolv.conf does not contain the line above, add the line to the file.
5. From the command prompt, ping the host system for the database using the IP address of the host system. If the ping is unsuccessful, there are two possible next steps depending on whether or not DNS is in use.
6. If DNS is in use, edit the /etc/nsswitch.conf to contain this line:
<IP_address><machine_name><machine_name.domain>
7. If DNS is not in use, edit the /etc/hosts to contain this line:
<IP_address><machine_name><machine_name.domain>
8. From the command prompt, ping the host system for the database using the IP address of the host system.
Mid-Tier database not runningTo see if the Mid-Tier database is running, enter this command at the command prompt on the database host system:
check_db
If the Mid-Tier database is not running, start it by entering these command at the command prompt on the database host system:
stop_mts
162 Maintenance and Troubleshooting Guide March 2008
start_db
start_mts
Verify Mid-Tier components can access databaseTo verify StatsPump updates data in the database and Mid-Tier components can access the database, follow these steps:
1. Open Window Explorer on the client system.
2. Navigate to the Avaya Proactive Contact install directory.
3. In the ..\Services\3rdParty\Oracle10g directory, double-click sqlplus.exe.
4. At the Enter user-name prompt, type avayapdsdb/avayadba.
5. At the SQL> prompt, type select * from dialerdef; and press ENTER. Make sure you have entered the semi-colon (;).
6. The screen should display something like this:DIALER_ID DIALERNAME_NTXT PACKETTIME_NUM DIALERIP_NTXT---------- -------------------- -------------- ------------------------------SYSTIME_NTXT SYSLINES_NUM SYSAGENTS_NUM SYSJOBS_NUM SYSUPDATETIME_NUM-------------------- ------------ ------------- ----------- -----------------LASTUPDTIME_NUM--------------- 23 redlab23 1144852359 143.243.248.1232006/4/12 7:32:39 21 108 50 6 1144932555
There is one row of data for each dialer in the pod. Be sure to note the SYSTIME_NTXT data, 2006/4/12 7:32:39 in the example. This time stamp should be current.
7. Enter the command again.
8. Each time you enter the command with about a 30 second pause, the systime_ntxt value updates for dialers running Avaya Proactive Contact.
9. If it is not updating, there in a problem with connectivity, see Dialer Mid-Tier connectivity.
Mid-Tier Data ServicesThis MS Windows component, avmtdsci.dll, provides database connection between the client applications and the primary dialer. At one end, it connects to a database to get data and at the other; it offers several interfaces to the client. The data returned by MTDSC is computed based on the information available in the database and the parameters provided by the client.
Maintenance and Troubleshooting Guide March 2008 163
If errors occur inside MTDSC, messages register in Window's Event Viewer. Usually the errors relate to the database connections, database operations and interface specifics.
To troubleshoot these issues, follow these steps:
1. To set the avmtdsci.dll in debug mode, change the Windows Registry entry for HKEY_LOCAL_MACHINE/SOFTWARE/Avaya/Proactive Contact 4.0/Supervisor/DscDebug to 1.
Avaya Proactive Contact creates an AvMTier directory at the Windows root that contains the avmtdsciiL0.log and the dscHierL0.log files.
Note:Note: You can also turn on debugging by through the CD Log Viewer main menu, Tools
> Turn Data Services Debug Logging On.2. To check the database connection, from the Windows Start menu, select Settings >
Control Panel > Administrative Tools > Data Sources (ODBC).3. Click on the System DSN tab.
4. Select AvayaPDSDB from the list of System Data Sources.
5. Click Configure.
6. In the Oracle ODBC Driver Configuration window, click Test Connection.
7. You should see a Connection successful message. Otherwise you see an error message which you should record.
Dialer Mid-Tier connectivityIf any client application has problems communicating with the Mid-Tier, follow these steps:
1. Type check_pds on the dialer and you should see the following message:
>>> All processes are running!
2. Open a Windows command prompt and enter the following command:
nslist -ORBSvcConf "C:\Program Files\Avaya\Proactive Contact 4.0\Supervisor\Common\corba_svc.conf" -ORBInitRef NameService=corbaloc:ssliop:<dialername>:23201/NameService
in which <sysname> is either the IP address or alias of the system on which the Mid-Tier Naming Service resides.
3. From the Windows Start menu, select Settings > Control Panel > Administrative Tools > Data Sources (ODBC).
4. Click on the System DSN tab.
5. Select AvayaPDSDB from the list of System Data Sources.
164 Maintenance and Troubleshooting Guide March 2008
6. Click Configure....7. In the Oracle ODBC Driver Configuration window, click Test Connection.
8. You should see a Connection successful message. Otherwise you see an error message which you should record.
Historical Data Server ComponentHistorical data describes all activities that take place on one or more dialers over a specified time interval. The datapump binary serves as the historical data component client (HDCC). The historical data server component (HDSC) runs from the start_pds script and the pdsconfigure script registers the HDSC into the Naming Service on the dialer.
HDCC troubleshootingIf the HDCC is not running:
1. Use check_mts to make sure the logger and serviceMonitor processes are running before starting the datapump binary.
2. On the primary dialer, use check_db to make sure the database is running and available to users. It should display this message:
>> > All processes are running and the database is opened to the users!
The following sections detail some typical problems that occur with the HDSC and HDCC.
Analyst shows no data for running job
A job is running and agents are logged in on one or more dialers, but a report executed from Analyst shows no data for that job.
To resolve this issue, follow these steps:
1. On the HDSC host system, use check_db to determine if the database is running. If the database is running, go to the next step.
2. If the database is not running, you need to start it using the start_db script. Consult Avaya Proactive Contact Software Reference Scripts for important information on using this script.
3. On the HDCC host system, enter check_mts to check that datapump is running. If the datapump is running, go to step 5.
Maintenance and Troubleshooting Guide March 2008 165
4. If datapump is not running, you need to run the start_mts script. Consult Avaya Proactive Contact Software Reference Scripts for important information on using this script.
5. Verify that HDCC is writing data to the database by:
a. At the command prompt on the client system, enter:
sqlplus
b. The database prompts you for a username and password. Log in as avayadba.
c. Enter this command at the sqlplus command prompt:
select * mo_job;See if data for this job is being populated into the tables.
6. If data for this job is being populated into the tables, consult Analyst troubleshooting for further help.
Historical data tables not being populated with data
A job is running and agents are logged in to one or more dialers but the historical data tables are not being populated with data for a specific job.
To resolve this issue, follow these steps:
1. On the HDSC host system, use check_db to determine if the database is running. If the database is running, go to step 3.
2. If the database is not running, you need to start it using the start_db script. Consult Avaya Proactive Contact Software Reference Scripts for important information on using this script.
3. On the HDCC host system, enter check_mts to check that datapump is running.
4. f the datapump is running, go to the next step. If datapump is not running, you need to run the start_mts script. Consult Avaya Proactive Contact Software Reference Scripts for important information on using this script.
5. Check the mid_tier_log.<ccyymmdd> with today�s date for error messages.
6. Verify that HDCC is writing data to the database by:
a. At the command prompt on the client system, enter:
sqlplus
b. The database prompts you for a username and password. Log in as avayadba.
c. Enter this command at the sqlplus command prompt:
select * mo_job;
See if data for this job is being populated into the tables.
7. If data for this job is being populated into the tables, use the UNIX ps command to make sure there is only one HDCC process running on the Mid-Tier host system.
166 Maintenance and Troubleshooting Guide March 2008
HDCC is not running
If the HDCC is not running, or fails to stay up after being restarted, follow these steps to resolve the issue:
1. Make sure both logger and serviceMonitor are both running by typing check_mts at the command prompt on the Mid-Tier host system.
2. If either logger of serviceMonitor is not running, use start_mts following the directions in start_mts topic in Avaya Proactive Contact Software Reference Scripts to start either or both binaries. If the problem persists, go to the next step.
3. On the HDSC host system, use check_db to determine if the database is running.
4. If the database is running, go to the next step. If the database is not running, you need to start it using the start_db script. Consult Avaya Proactive Contact Software Reference Scripts for important information on using this script.
5. Check the $VOICEDIR/account/mid_tier_log.ccyymmdd for today�s date for HDCC error messages.
HDSC run problems
The HDSC is not running or fails to stay up after being restarted. To resolve this issue run HDSC in debug mode and observe the output.
No historical data on the dialer
There is no historical data available on the dialer. Either the directory or file is missing, or the Data Manager is not running. To solve this issues, use stop_pds to stop Avaya Proactive Contact and start_pds following the directions in the stop_pds and start_pds topics in Avaya Proactive Contact Software Reference Scripts.
Historical data is incomplete
When historical data is incomplete, follow these steps to resolve the issue:
1. Check to make sure the job has completed before running the report.
2. Check the $VOICEDIR/account/mid_tier_log.ccyymmdd for today�s date for HDCC error messages.
Maintenance and Troubleshooting Guide March 2008 167
DatabaseOracle provides a mechanism, the online redo log, to recover from database errors. Each online redo log has at least two redo log files that contain redo records, also called redo entries. Each record is made up of a group of change vectors. Each vector is a description of a change made to a single block in the database. For instance, changing a salary value in an employee table, generates a redo record that describes changes to the:
● data segment block for the table
● rollback segment data block
● transaction table of the rollback segments
Note:Note: The Oracle background process Log Writer (LGWR) creates the redo log files in
the redo log buffer of the System Global Area (SGA). Whenever a transaction is committed, LGWR writes the transaction's redo records from the redo log buffer of the SGA to an online redo log file, and a system change number (SCN) is assigned to identify the redo records for each committed transaction.
The online redo log of a database consists of two or more online redo log files. Oracle requires a minimum of two files to guarantee that one is always available for writing while the other is being archived if the system is in ARCHIVELOG mode. LGWR writes to online redo log files in a circular fashion such that when the current online redo log file fills, LGWR begins writing to the next available online redo log file.
Redo records can also be written to an online redo log file before the corresponding transaction is committed. If the redo log buffer fills, or another transaction commits, LGWR flushes all of the redo log entries in the redo log buffer to an online redo log file, even though some redo records may not be committed. If necessary, Oracle can roll back these changes.
Redo entries record data that you can use to reconstruct all changes made to the database, including the rollback segments. Therefore, the online redo log also protects rollback data. When you recover the database using redo data, Oracle reads the change vectors in the redo records and applies the changes to the relevant blocks.
Filled online redo log files are available to LGWR for re-use depending on whether archiving is enabled:
● If archiving is disabled (NOARCHIVELOG mode), a filled online redo log file is available once the changes recorded in it have been written to the data files.
● If archiving is enabled (ARCHIVELOG mode), a filled online redo log file is available to LGWR once the changes recorded in it have been written to the deadfalls and once the file has been archived.
168 Maintenance and Troubleshooting Guide March 2008
Note:Note: ARCHIVELOG mode is not the default. You have to set it up as part of the admin
job. You can find more details on this entire process in the ORACLE Admin manual. There is a whole section about how you have to plan and configure your system to do this type of logging for recoverability.
Recovering in the event of media failure You can restore a database to the state it was in at the point of failure if the current transaction log file for the database is available and undamaged.
To restore the database to the point of failure:
1. Back up the currently active transaction log. For more information, see Transaction Log Backups in the Oracle documentation.
2. Restore the most recent database backup without recovering the database.
3. If differential backups exist, restore the most recent one.
4. Restore each transaction log backup created since the database or differential backup in the same sequence in which they were created without recovering the database.
5. Apply the most recent log backup (created in Step 1), and recover the database.
! Important:Important: To protect against loss of transactions under the Full Recovery model, the
transaction log must be protected against damage. It is strongly recommended that fault-tolerant disk storage be used for the transaction log.
See also Administering SQL Server/Transaction Log Backups in the Oracle documentation.
● You can set up your database so that you can fully recover data from a previous backup. All the logging you did is relative to the previous backup, it is not a snapshot of the database data taken at intervals of time.
● To do 1., you have to set up your database to log activities from the moment you did the backup to � the moment you do a next backup (for example) (this is the strategy that a dba, has to choose, plan, and configure for his system backup and recovery)
● This option is not the default or something that happens automatically because it is resource consuming and you really have to go through some planning and know what you are doing and be aware you are doing it.
● This is an admin function, not a conceptual function of the database.
Maintenance and Troubleshooting Guide March 2008 169
Common Oracle errorsIf an error occurs when preforming the procedure in the first part of Dialer Mid-Tier connectivity, make a note of the error number and the exact text of the error message. This contains the solutions to a couple common Oracle error messages.
ORA-12154: TNS: could not resolve the connect identifier
To resolve this issue, follow these steps:
1. In the Avaya Proactive Contact install directory, verify that the ..\Services\3rdParty\Oracle10g\tnsnames.ora file exists. When the user runs the Avaya Proactive Contact Configurator in Health Manager it creates this file. If it does not exist, create it by running the Avaya Proactive Contact Configurator again, then closing Health Manager. If the error message reappears, go to the next step.
2. Verify that there is no other installation of Oracle on the machine. Although Avaya Proactive Contact is designed to be self-contained and should coexist with other Oracle installations, there are some possible points of conflict, particularly if the other Oracle is older than version 10i. For example, if another Oracle installation uses a client profile (SQLnet.ora), this file may prevent the tnsnames.ora file from being discovered.
ORA-12545: Connect failed because target host or object does not exist
To resolve this issue, follow these steps:
1. In the Avaya Proactive Contact install directory, verify that the ..\Services\3rdParty\Oracle10g\tnsnames.ora file contains this line:
HOST = <dialername>
in which <dialername> is either the alias of the dialer or the dialer�s IP address.
2. If the tnsnames.ora file does not contain the line in step 1, add it to the file. If the error message persists, go to the next step.
3. Open Window Explorer.
4. Navigate to the Avaya Proactive Contact install directory.
5. In the ..\Services\3rdParty\Oracle10g directory, double-click sqlplus.exe.
6. At the Enter user-name prompt, type avayapdsdb/avayadba.
7. At the SQL> prompt, type select * from dialerdef; and press ENTER. Make sure you have entered the semi-colon (;).
8. The screen should display something like this:DIALER_ID DIALERNAME_NTXT PACKETTIME_NUM DIALERIP_NTXT---------- -------------------- -------------- ------------------------------SYSTIME_NTXT SYSLINES_NUM SYSAGENTS_NUM SYSJOBS_NUM SYSUPDATETIME_NUM
170 Maintenance and Troubleshooting Guide March 2008
-------------------- ------------ ------------- ----------- -----------------LASTUPDTIME_NUM--------------- 23 redlab23 1144852359 143.243.248.1232006/4/12 7:32:39 21 108 50 6 1144932555
There is one row of data for each dialer in the pod. Be sure to note the SYSTIME_NTXT data, 2006/4/12 7:32:39 in the example. This time stamp should be current. If it is not, data is not being updated to the database.
End user applicationsThis section covers some general troubleshooting tools and a couple specific troubleshooting scenarios.
AnalystIf there are connectivity issues, see Mid-Tier database network problems. If there are problems with reports such as printing, previewing, or incorrect content, check that these files in the C:\Windows\system32 directory have the listed value for attributes:
Use Windows Explore to navigate to the C:\Windows\system32 directory. Right click on each file name and click Properties to see these attributes.
If the size and version match, the file is most likely the current version.
File name Creation date Time Size Version
crpe32.dll
Friday, February 09, 2001
10:43:51 4587577
8.5.0.217
crwrap32.dll
Thursday, December 10, 1999
23:17:28 66560 7.0.0.8
Implode.dll
Thursday, November 10, 2001
15:42:09 1792018944
Crpaige80.dll
Thursday, November 09, 2000
07:52:00 618496 8.0.1.3
Maintenance and Troubleshooting Guide March 2008 171
EditorMost Supervisor Editor problems generate a message box with an error message. If such an error occurs note all the details in the message box.
cd.log file
For errors that do not generate a message box, use LogView.exe to view the cd.log file.
Note:Note: If errors occur, select Tools > Increase Logging Level on the LogView main
menu bar to make sure the maximum number of messages are written to the log.
Follow these steps using LogView to troubleshoot the issue:
1. On the main menu select View > Show Code Errors and uncheck the other options.
2. Search the Date/Time column until you find one or more errors that match the same time frame of the reported error.
3. If that isn't possible, make a backup of the cd.log file by copying it to another directory then renaming the copy as cd.bak.
4. Delete the original cd.log file using the LogViewer tool then click Refresh.
5. Perform the same action that caused the reported problems and re-examine the log. If there are no errors, uncheck the Show Code Errors option and check Show Transaction Tracking.
6. Click Refresh.
7. Record any errors that occur.
mid_tier_log files
In systems with a dialer pod, the mid_tier_log.ccyymmdd daily log file is on the master dialer. in such situations to determine the master dialer, check the Windows system�s registry entry for:MyComputer\HKEY_LOCAL_MACHINE\SOFTWARE\AvayaInc\PDS\CommandControl
The entry value should look like this:ORBInitRef"NameService=iioploc://<master_dialer>:23200/NameService
in which <master_dialer> is the name of the master dialer system.
Check the $VOICEDIR/account/mid_tier_log.ccyymmdd for today�s date for Supervisor Editor error messages.
You can also use Health Manager to check the status of the system.
172 Maintenance and Troubleshooting Guide March 2008
MonitorMonitor, Hierarchy Manager and Analyst use the same dll. This dll, the Mid-Tier data services component , AVMTDSCI.dll, handles real-time data communications between client applications and the dialer database. The AVMTDSCI.dll writes error messages to two logs, avmtdscil0.log and dscHier0.log in an AVMTier directory that the dll creates. Monitor error messages may appear in both logs.
Note:Note: Hierarchy Manager and Analyst error messages only appear in the dscHier0.log
file.
The next couple sections detail a couple common Monitor issues.
Log on to dialer, but no data in Monitor
If the user can log on to the dialer, but no data appears in Monitor, follow these step to resolve the issue:
1. From the Windows Start menu, select Settings > Control Panel > Administrative Tools > Data Sources (ODBC).
2. Click on the System DSN tab.
3. Select AvayaPDSDB from the list of System Data Sources.
4. Click Configure.
5. In the Oracle ODBC Driver Configuration window, click Test Connection.
6. You should see a Connection successful message. Otherwise you see an error message which you should record. If successful, go to the next step.
7. Use Health Manager, Dialer Services > Data to check that HDSC and EVENT_SERVICE are running.
8. If either is not running, use Health Manager to start the process that is not running.
9. On the middle-tier server, use check_db to make sure the database is running.
10. If the database process is not running, use start_db on the server as instructed in Avaya Proactive Contact Software Reference Scripts. If the problem persists, go to the next step.
11. Check the AVMTSDCI.log file or Windows Event Viewer for errors.
Stale Monitor data
If agent states are not being updated or jobs that have stopped are listed as active, the data available to Monitor is stale. Follow these steps to resolve the issue:
1. Use Health Manager, Dialer Services > Data to check that STAT_PUMP is running.
Maintenance and Troubleshooting Guide March 2008 173
2. If i is not running, use Health Manager to start STAT_PUMP.
3. On the middle-tier server, use check_db to make sure the database is running.
4. If the database process is not running, use start_db on the server as instructed in Avaya Proactive Contact Software Reference Scripts. If the problem persists, go to the next step.
5. Check the AVMTSDCI.log file or Windows Event Viewer for errors.
174 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 175
Error message, source and error description table
The table in this section includes the error message number, source files and a more complete description of the condition that generated the error message.
Error Numbers
Found in these files Extended Description
E????? v_dialer\dialer\src\core\agent.c Timed out waiting for response from porter
E00000 v_dialer\dialer\src\core\job_strter.c Error loading job chain
E00500 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\donotcall.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\enforcer\src\enforcer.cppv_dialer\dialer\src\swif\exec\swid_main.cv_dialer\dialer\src\core\nuisance.cv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\core\recall_rmp.cv_dialer\dialer\src\dbmaint\record_ed.cv_dialer\dialer\src\core\switcher.cv_dialer\dialer\src\dbconst\writetape.c
Caught signal number <num>
176 Maintenance and Troubleshooting Guide March 2008
E00501 v_dialer\admin\src\signalit.cv_dialer\admin\src\termprocess.cv_dialer\dialer\src\utility\agentcheck.cv_dialer\dialer\src\utility\agentcount.cv_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\beeper.cv_dialer\dialer\src\callsel\callconn.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\utility\list_status.cv_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxxv_dialer\dialer\src\reports\rpt_mgr\pds_view.cv_dialer\dialer\src\reports\rpt_mgr\rpt_view.c
Caught signal <num> and terminated
Maintenance and Troubleshooting Guide March 2008 177
E00502 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\admin\src\createop.cv_dialer\dialer\src\callsel\cseldmp.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\callsel\call_stgy.cv_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\jobscrn.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\port_hndle.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\reports\reportgen\reportfmt.cv_dialer\dialer\src\swif\exec\swid_main.cv_dialer\dialer\src\lstextract\ext_list.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\ivr\src\ivr_config.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\markrec\latemrk.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\editor\master_ed.cv_dialer\dialer\DialerCmdCtrl\AgentLib.cppv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\postupdate\postupdate.cv_dialer\dialer\src\dbmaint\record_ed.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\utility\ziptoarea.cv_dialer\dialer\src\core\screen.c
Failed to allocate memory
178 Maintenance and Troubleshooting Guide March 2008
E00503 v_dialer\dialer\src\callsel\callconn.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\dbconst\selection.cv_dialer\dialer\src\reports\history\hist_rpt.cv_dialer\dialer\src\lstextract\ext_data.cv_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\markrec\set_field.cv_dialer\dialer\src\menu\submenu.cv_dialer\dialer\src\dbconst\writetape.c
Pattern error
E00504 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\swif\exec\swid_main.cv_dialer\dialer\src\utility\pds_pg.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
Bad argument
E00505 v_dialer\dialer\src\markrec\latelst.c Invalid time format
E00506 v_dialer\dialer\src\markrec\latelst.c Invalid date format
E00507 v_dialer\dialer\src\listserver\listserver.cv_dialer\dialer\DialerCmdCtrl\MasterCfgTable.cppv_dialer\dialer\src\utility\port_start.c
Environment variable not set
E00508 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\listserver\listserver.cv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\reports\history\vrecords.c
Mastercfg error
Maintenance and Troubleshooting Guide March 2008 179
E00509 v_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\preprocess\msgmap.cv_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\src\postupdate\postupdate.cv_dialer\dialer\src\dbmaint\rec_update.cv_dialer\dialer\src\scrnbld\scrnbld.cv_dialer\dialer\src\markrec\set_field.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\reports\history\vrecords.c
Entry <value> missing/invalid in <filename> file
E00510
E00511 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\dbmaint\redit_scrn.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbmaint\record_ed.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\dbconst\writetape.c
Failed to process file <filename>
E00512 v_dialer\dialer\DialerCmdCtrl\DccsVmValidator.cpp
Audio file name too long
E00513 v_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\reports\reportgen\reportfmt.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\utility\pds_pg.cv_dialer\dialer\src\scrnbld\scrnbld.c
Invalid file name
E00514
180 Maintenance and Troubleshooting Guide March 2008
E00515 v_dialer\admin\src\addgroup.cv_dialer\dialer\src\utility\adump.cv_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\callsel\callconn.cv_dialer\dialer\src\core\caller.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\editor\config_ed.cv_dialer\admin\src\createop.cv_dialer\dialer\src\callsel\cseldmp.cv_dialer\dialer\src\core\agent_io_util.cv_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\chainhandler.cv_dialer\dialer\src\core\dnc_mark.cv_dialer\dialer\src\core\install_ext.cv_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\screen.c8v_dialer\dialer\src\core\transfer.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\pcextract\fileops.cv_dialer\dialer\src\custom\readwrt.cv_dialer\dialer\src\utility\portcorr.cv_dialer\dialer\src\utility\test_help.cv_dialer\library\libdsi\src\rpt_server.cv_dialer\dialer\src\swif\exec\opmoncfg.cv_dialer\dialer\src\utility\edump.cv_dialer\dialer\src\utility\fdictdump.cv_dialer\dialer\src\lettergen\formlet.cv_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\preprocess\hsh_dump.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\imon\internetmon.cv_dialer\ivr\src\ivr_config.cv_dialer\dialer\src\utility\jobkeys.c
Unable to open file
Maintenance and Troubleshooting Guide March 2008 181
E00515 v_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\markrec\latemrk.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\lettergen\mail_label.cv_dialer\dialer\src\editor\master_ed.cv_dialer\dialer\src\menu\menu.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\core\msg_loader.cv_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxxv_dialer\dialer\enforcer\src\enlicense.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptValidatingProcessor_utest.cppv_dialer\dialer\src\core\nuisance.cv_dialer\dialer\src\reports\history\op_hist.cv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\postupdate\postupdate.cv_dialer\dialer\src\utility\print_pif.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbmaint\rec_update.cv_dialer\dialer\src\dbmaint\record_ed.cv_dialer\dialer\src\reports\rpt_mgr\rpt_view.cv_dialer\dialer\src\utility\scan.cv_dialer\dialer\src\scrnbld\scrnbld.cv_dialer\dialer\src\markrec\set_field.cv_dialer\dialer\src\menu\submenu.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\reports\history\vrecords.cv_dialer\dialer\src\dbconst\writetape.cv_dialer\dialer\src\utility\ziptoarea.c
E00516 v_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxx
File did not close
182 Maintenance and Troubleshooting Guide March 2008
E00517 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\utility\ziptoarea.c
Unable to create file
E00518 v_dialer\dialer\src\callsel\callconn.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\agent_sys_util.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\dbmaint\redit_scrn.cv_dialer\dialer\src\pcextract\fileops.cv_dialer\dialer\src\reports\history\op_hist.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cppv_dialer\dialer\src\reports\history\op_hist.cv_dialer\dialer\src\dbconst\readtape.c
<process_name> failed to read from file <filename>
E00519 v_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\dbconst\writetape.c
Failed to write to file <filename>
E00520 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\reports\history\vrecords.c
Failed to lock file
E00521 v_dialer\library\libdsi\src\getnum.c Failed to unlock file
E00522 v_dialer\dialer\src\utility\enq_pty.cv_dialer\dialer\Cmdctrl\HeadsetLib.cppv_dialer\dialer\Cmdctrl\ShmAccess.cpp
Failed to attach shared memory
E00523 v_dialer\library\libdsi\src\conn_queue.c Failed to detach shared memory
E00524 v_dialer\library\libdsi\src\conn_queue.c Failed to remove shared memory
E00525 v_dialer\library\libdsi\src\mqueue.c Failed to get message queue
Maintenance and Troubleshooting Guide March 2008 183
E00526 v_dialer\library\libdsi\src\mqueue.c Failed to send message
E00527 v_dialer\library\libdsi\src\mqueue.c Unable to receive a message
E00528 v_dialer\library\libdsi\src\mqueue.c Unable to remove message queue
E00529 v_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\dbmaint\rec_update.cv_dialer\dialer\src\swif\exec\swid_main.c
Failed to invoke function
E00530 v_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\core\dnc_mark.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\dbmaint\redit_scrn.cv_dialer\dialer\src\reports\reportgen\reportinit.cv_dialer\dialer\src\lstextract\ext_data.cv_dialer\dialer\src\lstextract\ext_list.cv_dialer\dialer\src\utility\fdictdump.cv_dialer\dialer\src\lettergen\formlet.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\lettergen\mail_label.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.cv_dialer\dialer\src\dbconst\writetape.cv_dialer\dialer\src\utility\ziptoarea.c
Unable to open list <calling_list_name>
184 Maintenance and Troubleshooting Guide March 2008
E00531 v_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\core\dnc_mark.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\dbmaint\redit_scrn.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\postupdate\postupdate.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.cv_dialer\dialer\src\dbconst\writetape.cv_dialer\dialer\src\utility\ziptoarea.c
Failed to read calling list definition
E00532 v_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\de_reject.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\lstextract\ext_data.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\markrec\latemrk.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\lettergen\mail_label.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.cv_dialer\dialer\src\utility\ziptoarea.c
Field <name> not defined in calling list <filename>
E00533 v_dialer\dialer\src\preprocess\listdist.c Field has incorrect length
E00534 v_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\transfer.cv_dialer\dialer\src\dbconst\readtape.c
Not a calling list
Maintenance and Troubleshooting Guide March 2008 185
E00535 v_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
No space on file system
E00536 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\dbconst\moj_conv.c
Failed to initialize keyboard
E00537 v_dialer\dialer\src\core\api_jobctl.c Failed to initialize screen environment
E00538 v_dialer\dialer\src\core\api_jobctl.c Failed to setup command keys
E00539 v_dialer\dialer\src\core\api_jobctl.c Failed to create jobmon graphical user interface (GUI)
E00540 v_dialer\library\libui\src\vlui.c Failed to create window pointer
E00541 v_dialer\dialer\src\core\screen.cv_dialer\dialer\src\dbmaint\redit_scrn.cv_dialer\dialer\src\utility\vfiles.c
Unable to open keys file
E00542 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\dbconst\selection.c
Field not defined in calling list
E00543 v_dialer\dialer\src\preprocess\clhash.c Field not defined in calling list
E00544 v_dialer\dialer\src\core\listops.c Invalid pattern
E00545 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\chainhandler.cv_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\op_handler.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\core\port_hndle.cv_dialer\dialer\src\core\scripter.cv_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\src\core\recall_rmp.c
Process unable to send <string> to <process_name>
E00546 v_dialer\library\libutil\src\checkdir.c Failed to create directory
186 Maintenance and Troubleshooting Guide March 2008
E00547 v_dialer\library\libutil\src\checkdir.c Non-directory in directory path
E00548 v_dialer\dialer\src\core\conn_mgr.cmidtier\unixdev\services\src\ShmDataReader.cpp
Missing or invalid entry in file
E00549 v_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\listserver\listserver.cmidtier\unixdev\services\src\ShmDataReader.cpp
<op_name> operation failed for file <file_name>
E00550 midtier\unixdev\services\src\ShmDataReader.cpp
Invalid entry for <name> in <filename>
E00551
E00552 v_dialer\dialer\src\listserver\listserver.cmidtier\unixdev\services\src\ShmDataReader.cpp
Failed to open directory <dir_name>
E00553 midtier\unixdev\services\src\ShmDataReader.cpp
File <filename> does not exist
E00554 v_dialer\dialer\src\listserver\listserver.c <opname> operation failed
E00555 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\\callsel\md_callsel.cmidtier\unixdev\services\src\EventServiceIF_i.cppv_dialer\dialer\DialerCmdCtrl\expr_utest.cpp
<string>-<string>
E00556 v_dialer\library\libutil++\src\ReadOnlyFile.cpp
File <filename> exists, but is not readable by user <user_name
E00557 v_dialer\library\libutil++\src\WriteOnlyFile.cpp
File <filename> exists, but cannot be written by user <user_name
E10012 v_dialer\library\libdsi\src\script_lng.c Pattern error at line <number>
E10013 v_dialer\library\libdsi\src\sock_stream.cpp Cannot find service in /etc/services
E10014 v_dialer\library\libdsi\src\sock_stream.cpp Socket call failed
E10015 v_dialer\library\libdsi\src\sock_stream.cpp Unable to bind to local address
E10016 v_dialer\library\libdsi\src\sock_stream.cpp Unable to setup listen on socket
Maintenance and Troubleshooting Guide March 2008 187
E10017 v_dialer\library\libdsi\src\sock_stream.cpp Unable to accept connection on socket
E10018 v_dialer\library\libdsi\src\sock_stream.cpp Unable to connect to socket
E10019 v_dialer\library\libdsi\src\sock_stream.cpp Unable to send data to socket
E10200 v_dialer\library\libdsi\src\getnum.c Unequal phone number field lengths in file <filename>
E10201 v_dialer\dialer\src\core\operator.c Invalid line selection
E10600
E10601
E10602 v_dialer\dialer\src\core\job_strter.cdialer_client\Redwood\VBApps\Editor\MDIForm1.frm
File <filename> does not exist
E10603 - E10628
E10629 dialerclient\Redwood\VBApps\Editor\MDIForm1.frmdialerclient\Redwood\VBApps\Editor\Classes\CJobs.cls
Selection list not available for use
E10630 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
STATUSFLAG field missing
E10631 - E10648
E10649 v_dialer\library\libdsi\src\job_cntrl.c Failed to find linked job file
E10650 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\library\libdsi\src\job_cntrl.c
Linking between virtual agent jobs and non-virtual jobs is not permitted
E10651-E10653
E10654 dialerclient\Redwood\VBApps\Editor\MDIForm1.frmdialerclient\Redwood\VBApps\Editor\Classes\CJobs.cls
Could not verify selection list for job
E10655 dialerclient\Redwood\VBApps\Editor\MDIForm1.frmdialerclient\Redwood\VBApps\Editor\Classes\CJobs.cls
Could not verify selection list for job
188 Maintenance and Troubleshooting Guide March 2008
E10656 dialerclient\Redwood\VBApps\Editor\MDIForm1.frmdialerclient\Redwood\VBApps\Editor\Classes\CJobs.cls
Selection list not created with this calling list
E10657-E10659
E10660- E10667
E10800-E10805
E10806 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Failed to read file header
E10807
E10808 v_dialer\library\libutil++\src\KeywordValue.cppv_dialer\library\libutil++\src\mbcs_string.cppv_dialer\library\libutil++\src\SerializableErrorRev_dialer\dialer\src\core\porter.cppv_dialer\library\libutil++\src\SerializableKvErrorStorage.cpp
agent - Failed to read from file <name>
E10809-E10824
E10850 v_dialer\library\libdsi\src\claccess.c Unable to open list <calling_list_name>
E10851 v_dialer\library\libdsi\src\claccess.c Unable to access host <name> using name
E10852 v_dialer\library\libdsi\src\claccess.c Socket failed
E10853 v_dialer\library\libdsi\src\claccess.c Socket connection to list server running on <name> failed
E10854 v_dialer\library\libdsi\src\claccess.c Attempt to store list_client on host failed
E10855 v_dialer\library\libdsi\src\claccess.c Write error
E10856 v_dialer\library\libdsi\src\claccess.c clstat <xfd> failed
E10857 v_dialer\library\libdsi\src\claccess.c Clear fdict <number> failed
E10858 v_dialer\library\libdsi\src\claccess.c Unable to access host <name> using name
Maintenance and Troubleshooting Guide March 2008 189
E10859 v_dialer\library\libdsi\src\cllaccess.c Bad file descriptor <num>
E10860 v_dialer\library\libdsi\src\claccess.c File corruption or record size mismatch detected in calling list (name>
E10861 v_dialer\library\libdsi\src\cllaccess.c Failed to remove file <filename>
E10900 v_dialer\library\libdsi\src\conn_crit.c Mastercfg error
E11000 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid delay specification
E11001 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Recall attempt can�t exceed <num>
E11002 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid recall code <code>
E11003 v_dialer\library\libutil++\src\FileMasterConfig.cppv_dialer\library\libdsi\src\cstgy.c
Failed to determine max number of phones
E11004 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Failed to determine max number of phones
E11005 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Gap found between selection criteria lines
E11006 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Extra comma in selection criteria
E11007 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid phone <number>
E11008 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Field name <name> is invalid
E11009 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid field value <value>
190 Maintenance and Troubleshooting Guide March 2008
E11010 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid logical connector <name>
E11011 v_dialer\library\libcallsel\src\CallStgyLib.cpp
Invalid time zone character <char>
E11012
E11013 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid ring count <num>
E11014 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid call detection mode <name>
E11015 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid delay specification
E12000 v_dialer\library\libdsi\src\getnum.c Unequal phone number field lengths in file <name>
E12001
E12100 v_dialer\library\libutil\src\molocale.c Molocale - unknown language name <lang>
E12101 v_dialer\library\libutil\src\molocale.c Molocale - failed to set locale <name>
E12150 v_dialer\library\libdsi\src\pvrs_helper.c Preview record search failed to initialize
E12151
E12152 v_dialer\library\libdsi\src\pvrs_helper.cv_dialer\dialer\src\dbmaint\record_ed.c
No previous record
E12153 v_dialer\library\libdsi\src\pvrs_helper.cv_dialer\dialer\src\dbmaint\record_ed.c
No more records
E12154 v_dialer\dialer\src\core\oper_pvrs.cv_dialer\dialer\src\dbmaint\record_ed.c
Fail to load record
E12155 v_dialer\dialer\src\core\oper_pvrs.c Record currently in use
E12156 v_dialer\library\libdsi\src\pvrs_helper.c No record found
E12200-E12203
Maintenance and Troubleshooting Guide March 2008 191
E12400 v_dialer\library\libdsi\src\keystroke.cv_dialer\library\libutil\src\tsystem.c
tget returned error number <num> raising signal <num>
E12600 v_dialer\library\libdsi\src\map_dict.cv_dialer\library\libcallsel\src\map_dict2.cpp
Calling list <name> is not in shared memory
E12601 v_dialer\library\libdsi\src\map_dict.cv_dialer\library\libcallsel\src\map_dict2.cpp
Calling list line count does not match shared memory
E12800 v_dialer\library\libdsi\src\map_scrn.c Failed to find screen <name>
E13000 v_dialer\library\libdsi\src\mqueue.c IPC - invalid input argument
E13001 v_dialer\library\libdsi\src\mqueue.c IPC - invalid ipc entry
E13002
E13003 v_dialer\library\libdsi\src\mqueue.c Invalid ipc number <num>
E13004 v_dialer\library\libdsi\src\mqueue.c Warning: CFRM message truncated
E13005 v_dialer\library\libdsi\src\mqueue.c Timed out waiting for <string> confirmation
E13006 v_dialer\library\libdsi\src\mqueue.c Response message too long
E13007 v_dialer\library\libdsi\src\mqueue.c IPC - Failed to open opmon message queue
E13008 v_dialer\library\libdsi\src\mqueue.c <process_name> Failed on semaphore removal, err=<num> key=<num>
E13009 v_dialer\library\libdsi\src\mqueue.c <process_name> - Failed on semaphore operation, err <err_num> key = <sem_key_id> code = <op_code>
E13010 v_dialer\library\libdsi\src\mqueue.c <process_name> - Accessing bad semaphore
E13011 v_dialer\library\libdsi\src\mqueue.c <process_name> - Failed to open semaphore, err(<num>)
E13200 v_dialer\library\libdsi\src\opident.c Headset value (<headset_value>, <return_value>) out of bound
E13201 v_dialer\library\libdsi\src\opident.c Headset <id_num> not specified in dgswitch.cfg file
192 Maintenance and Troubleshooting Guide March 2008
E13400
E13401
E13402 v_dialer\library\libdsi\src\phonefmt.c Missing prefix
E13403 v_dialer\library\libdsi\src\phonefmt.c Missing line type
E13404 v_dialer\library\libdsi\src\phonefmt.c Missing or invalid num of chars to strip
E13405
E13406 v_dialer\library\libdsi\src\phonefmt.c Missing suffix
E13407 v_dialer\library\libdsi\src\phonefmt.cv_dialer\library\libdsi\src\vlloccall.c
Duplicate ALL phone numbers specification
E13408 v_dialer\library\libdsi\src\phonefmt.c Phone number too long
E13409 v_dialer\library\libdsi\src\phonefmt.c Phone number too long
E13410 v_dialer\library\libdsi\src\phonefmt.c Missing std to dial phone number format
E13411 v_dialer\library\libdsi\src\phonefmt.c Invalid use of ALL phone numbers specification
E13412 v_dialer\library\libdsi\src\phonefmt.c Missing phone numbers
E13600 v_dialer\library\libdsi\src\rpt_server.c Report failed, system out of space
E13800 v_dialer\library\libdsi\src\swcfg_tbl.c Invalid headset number <num> <line>
E13801 v_dialer\library\libdsi\src\swcfg_tbl.c Headset port number <num> out of range
E13802 v_dialer\library\libdsi\src\swcfg_tbl.c Normal trunk port number <num> out of range
E13803 v_dialer\library\libdsi\src\swcfg_tbl.c Invalid normal trunk equipment number <num>
E13804
E13805 v_dialer\library\libdsi\src\swcfg_tbl.c Invalid normal trunk equipment number <num>
E13806
E13807 v_dialer\library\libdsi\src\swcfg_tbl.c Failed to process line (<line_buffer_name>)
E14100
Maintenance and Troubleshooting Guide March 2008 193
E14101
E14200 v_dialer\library\libdsi\src\vlloccall.c Missing delay specification
E14201 v_dialer\library\libdsi\src\phonefmt.cv_dialer\library\libdsi\src\vlloccall.c
Missing or invalid low range
E14202 v_dialer\library\libdsi\src\phonefmt.cv_dialer\library\libdsi\src\vlloccall.c
Invalid range character
E14203 v_dialer\library\libdsi\src\phonefmt.cv_dialer\library\libdsi\src\vlloccall.c
Missing high range
E14204 v_dialer\library\libdsi\src\vlloccall.c Invalid delay specification
E14205 v_dialer\library\libdsi\src\vlloccall.c Missing completion code
E14206 v_dialer\library\libdsi\src\vlloccall.c Missing completion code
E14207 v_dialer\library\libdsi\src\vlloccall.c Range does not come after previous range
E14208 v_dialer\library\libdsi\src\vlloccall.c Missing limit
E14209 v_dialer\library\libdsi\src\phonefmt.cv_dialer\library\libdsi\src\vlloccall.c
future use - phonefmt.cfg
E14210 v_dialer\library\libdsi\src\vlloccall.c Missing time zone specification for country <num>
E14211 v_dialer\library\libdsi\src\vlloccall.c Missing or invalid time zone designation
E14212 v_dialer\library\libdsi\src\vlloccall.c Missing or invalid reject phone number pattern
E14213 v_dialer\library\libdsi\src\vlloccall.c Missing or invalid reject phone number pattern
E14214 v_dialer\library\libdsi\src\vllocmisc.cv_dialer\library\libdsi\src\vllocport.c
Duplicate country specified
E14215 v_dialer\library\libdsi\src\vllocmisc.cv_dialer\library\libdsi\src\vllocport.c
Invalid answer delay time
E14216 v_dialer\library\libdsi\src\vllocport.c Invalid DAA type
E14217 v_dialer\library\libdsi\src\vllocport.c Invalid VM2 locale code
E14218 v_dialer\library\libdsi\src\vlloccall.c Invalid phone number length
E14219 v_dialer\library\libdsi\src\vlloccall.c Rejected phone number (L<num>)
194 Maintenance and Troubleshooting Guide March 2008
E14220 v_dialer\library\libdsi\src\vlloccall.c Cannot find time zone for phone number
E14221 v_dialer\library\libdsi\src\vllocport.c Invalid offhook retry delay
E14222 v_dialer\library\libdsi\src\vllocport.c Invalid wait limit
E14400
E14401 v_dialer\dialer\src\preprocess\ij_merge.cv_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
E14402 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
E14404 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
E14405 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
E14406 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
E14407 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
E14408 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
E14409 v_dialer\library\libdsi\src\conn_queue.c
E14410 v_dialer\library\libdsi\src\conn_queue.c
E14800 v_dialer\library\libutil\src\tcap.c
E14801 v_dialer\library\libutil\src\tcap.c
E14802 v_dialer\library\libutil\src\tcap.c
E14900 v_dialer\library\libutil\src\terminal.c
E14901 v_dialer\library\libutil\src\terminal.c
E15200 v_dialer\library\libui\src\vlui.c
Maintenance and Troubleshooting Guide March 2008 195
E15201 v_dialer\library\libui\src\vlui.c
E15202 v_dialer\library\libui\src\vlui.c
E15203 v_dialer\library\libui\src\vlui.c
E15204 v_dialer\library\libui\src\vlui.c
E15205 v_dialer\library\libui\src\vlui.c
E15206 v_dialer\library\libui\src\vlui.c
E15400 v_dialer\library\libdsi\src\bsrch.c
E15401 v_dialer\library\libdsi\src\bsrch.c
E15402 v_dialer\library\libdsi\src\bsrch.c
E15403 v_dialer\library\libdsi\src\bsrch.c
E15404 v_dialer\library\libdsi\src\bsrch.c
E15420 v_dialer\library\libdsi\src\bsrch.c
E15421 v_dialer\library\libdsi\src\bsrch.c
E15422 v_dialer\library\libdsi\src\bsrch.c
E15424 v_dialer\library\libdsi\src\bsrch.c
E16000 v_dialer\library\libutil\src\labfdctry.c
E16100 v_dialer\library\libutil\src\labfile.c
E16101 v_dialer\library\libutil\src\labfile.c
E16102 v_dialer\library\libutil\src\labfile.c
E16400 v_dialer\library\libutil\src\preftree.c
E16401 v_dialer\library\libutil\src\preftree.c
E16402 v_dialer\library\libutil\src\preftree.c
E16403 v_dialer\library\libutil\src\preftree.c
E16404 v_dialer\library\libutil\src\preftree.c
E16405 v_dialer\library\libutil\src\preftree.c
E16406 v_dialer\library\libutil\src\preftree.c
E16407 v_dialer\library\libutil\src\preftree.c
E16408 v_dialer\library\libutil\src\preftree.c
E16409 v_dialer\library\libutil\src\preftree.c
196 Maintenance and Troubleshooting Guide March 2008
E16410 v_dialer\library\libutil\src\preftree.c
E16411 v_dialer\library\libutil\src\preftree.c
E16500 v_dialer\library\libutil\src\hash.c
E16501 v_dialer\library\libutil\src\hash.c
E16600 v_dialer\library\libutil\src\expr.c
E16601 v_dialer\library\libutil\src\expr.c
E16602 v_dialer\library\libutil\src\expr.c
E16603 v_dialer\library\libutil\src\expr.c
E16604 v_dialer\library\libutil\src\expr.c
E16605 v_dialer\library\libutil\src\expr.c
E16606 v_dialer\library\libutil\src\expr.c
E16607 v_dialer\library\libutil\src\expr.c
E16608 v_dialer\library\libutil\src\expr.c
E16609 v_dialer\library\libutil\src\expr.c
E16610 v_dialer\library\libutil\src\expr.c
E16611 v_dialer\dialer\DialerCmdCtrl\expr_utest.cpp
E16612 v_dialer\library\libutil\src\expr.c
E16620 v_dialer\library\libutil\src\expr.c
E16621 v_dialer\library\libutil\src\expr.c
E16800 v_dialer\library\libutil\src\undefined.c
E16900 v_dialer\library\libutil\src\exec_prog.c
E16901 v_dialer\library\libutil\src\exec_prog.c
E16902 v_dialer\library\libutil\src\exec_prog.c
E16903 v_dialer\library\libutil\src\exec_prog.c
E16904 v_dialer\library\libutil\src\exec_prog.c
E16905 v_dialer\library\libutil\src\exec_prog.c
E16906 v_dialer\library\libutil\src\exec_prog.c
E16907 v_dialer\library\libutil\src\exec_prog.c
Maintenance and Troubleshooting Guide March 2008 197
E16908 v_dialer\library\libutil\src\exec_prog.c
E16909 v_dialer\library\libutil\src\exec_prog.c
E16910 v_dialer\library\libutil\src\exec_prog.c
E16911 v_dialer\library\libutil\src\exec_prog.c
E16912 v_dialer\library\libutil\src\exec_prog.c
E17000 v_dialer\library\libutil\src\account.cv_dialer\library\libutil++\src\account_r.c
E17001
E17002
E17003 v_dialer\dialer\DialerCmdCtrl\AgentLib.cpp
E17004
E17005 v_dialer\library\libutil\src\config.c
E17100
E17101
E18200 v_dialer\library\libswif\src\port_dg.c
E18201 v_dialer\library\libswif\src\port_dg.c
E18202 v_dialer\library\libswif\src\port_dg.c
E18203 v_dialer\dialer\src\core\msg_loader.cv_dialer\library\libswif\src\port_dg.c
E18204 v_dialer\library\libswif\src\port_dg.c
E18205 v_dialer\library\libswif\src\port_dg.c
E18206 v_dialer\library\libswif\src\port_dg.c
E18207 v_dialer\library\libswif\src\port_dg.c
E18208 v_dialer\library\libswif\src\port_dg.c
E18209 v_dialer\library\libswif\src\port_dg.c
E18210 v_dialer\library\libswif\src\port_dg.c
E18211
E18212 v_dialer\library\libswif\src\port_dg.c
E18213 v_dialer\library\libswif\src\port_dg.c
198 Maintenance and Troubleshooting Guide March 2008
E18214 v_dialer\library\libswif\src\port_dg.c
E18215 v_dialer\library\libswif\src\port_dg.c
E18216
E18217
E18218
E18219 v_dialer\library\libswif\src\port_dg.c
E18220 v_dialer\library\libswif\src\port_dg.c
E18221 v_dialer\library\libswif\src\port_dg.c
E18222 v_dialer\library\libswif\src\port_dg.c
E18223 v_dialer\library\libswif\src\port_dg.c
E18224 v_dialer\library\libswif\src\port_dg.c
E18225 v_dialer\library\libswif\src\port_dg.c
E18226 v_dialer\library\libswif\src\port_dg.c
E18227 v_dialer\library\libswif\src\port_dg.c
E18228 v_dialer\library\libswif\src\port_dg.c
E18400 v_dialer\library\libswif\src\swid.c
E18401 v_dialer\library\libswif\src\swid.c
E18402 v_dialer\library\libswif\src\swid.c
E18403 v_dialer\library\libswif\src\swid.c
E18404 v_dialer\library\libswif\src\swid.c
E18405 v_dialer\library\libswif\src\swid.c
E18406 v_dialer\library\libswif\src\swid.c
E18407 v_dialer\library\libswif\src\swid.c
E18408 v_dialer\library\libswif\src\swid.c
E18409 v_dialer\library\libswif\src\swid.c
E18410 v_dialer\library\libswif\src\swid.c
E18411 v_dialer\library\libswif\src\swid.c
E18412 v_dialer\library\libswif\src\swid.c
E18413 v_dialer\library\libswif\src\swid.c
Maintenance and Troubleshooting Guide March 2008 199
E18414 v_dialer\library\libswif\src\swid.c
E18415 v_dialer\library\libswif\src\swid.c
E18416 v_dialer\library\libswif\src\swid.c
E19000 v_dialer\library\libswif\src\swie.c
E19001 v_dialer\library\libswif\src\swie.c
E19002 v_dialer\library\libswif\src\swie.c
E19003 v_dialer\library\libswif\src\swie.c
E19004 v_dialer\library\libswif\src\swie.c
E19005 v_dialer\library\libswif\src\swie.c
E19006 v_dialer\library\libswif\src\swie.c
E19007 v_dialer\library\libswif\src\swie.c
E19200 v_dialer\library\libswif\src\swiq.c
E19201 v_dialer\library\libswif\src\swiq.c
E19400 v_dialer\library\libswif\src\switch_dg.c
E19401 v_dialer\library\libswif\src\switch_dg.c
E19402 v_dialer\library\libswif\src\switch_dg.c
E19403 v_dialer\library\libswif\src\switch_dg.c
E19404 v_dialer\library\libswif\src\switch_dg.c
E19405 v_dialer\library\libswif\src\switch_dg.c
E19406 v_dialer\library\libswif\src\switch_dg.cv_dialer\library\libswif\src\port_sd.c
E19407 v_dialer\library\libswif\src\switch_dg.c
E19408 v_dialer\library\libswif\src\switch_dg.c
E19600 v_dialer\library\libswif\src\swix.c
E19601 v_dialer\library\libswif\src\swix.c
E19602 v_dialer\library\libswif\src\swix.c
E19603 v_dialer\library\libswif\src\swix.c
E19604 v_dialer\library\libswif\src\swix.c
E19605 v_dialer\library\libswif\src\swix.c
200 Maintenance and Troubleshooting Guide March 2008
E19606 v_dialer\library\libswif\src\swix.c
E19607 v_dialer\library\libswif\src\swix.c
E19608 v_dialer\library\libswif\src\swix.c
E19609 v_dialer\library\libswif\src\swix.c
E25000 v_dialer\dialer\src\callsel\call_scrn.c
E25001 v_dialer\dialer\src\callsel\call_scrn.c
E25002 v_dialer\dialer\src\callsel\call_scrn.c
E25003 v_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\core\agent_misc_util.c
E25004 v_dialer\dialer\src\callsel\call_scrn.c
E25005 v_dialer\dialer\src\callsel\call_scrn.c
E25006
E25007 v_dialer\dialer\src\callsel\call_scrn.c
E25008
E25009 v_dialer\dialer\src\callsel\call_scrn.c
E25010 v_dialer\dialer\src\callsel\call_scrn.c
E25011 v_dialer\dialer\src\callsel\call_scrn.c
E25012
E25013 v_dialer\dialer\src\callsel\call_scrn.c
E25014 v_dialer\dialer\src\callsel\call_scrn.c
E25015 v_dialer\dialer\src\callsel\call_scrn.c
E25016 v_dialer\dialer\src\callsel\call_scrn.c
E25017 v_dialer\dialer\src\callsel\call_scrn.c
E25018 v_dialer\dialer\src\callsel\call_scrn.c
E25019 v_dialer\dialer\src\callsel\callsel.c
E25020 v_dialer\dialer\src\callsel\callsel.c
E25021 v_dialer\dialer\src\callsel\callsel.c
E25022 v_dialer\dialer\src\callsel\callsel.c
E25023 v_dialer\dialer\src\callsel\callsel.c
Maintenance and Troubleshooting Guide March 2008 201
E25024 v_dialer\dialer\src\callsel\call_scrn.c
E25025 v_dialer\dialer\src\callsel\call_scrn.c
E25026 v_dialer\dialer\src\callsel\callsel.c
E25027
E25028 v_dialer\dialer\src\callsel\callsel.c
E25029 v_dialer\dialer\src\callsel\call_scrn.c
E25030
E25031 v_dialer\library\libcallsel\src\cllcallsel.cpp
E25032 v_dialer\library\libcallsel\src\cllcallsel.cpp
E25501 v_dialer\dialer\src\callsel\callconn.c
E25502 v_dialer\dialer\src\callsel\callconn.c
E25503 v_dialer\dialer\src\callsel\callconn.c
E25504 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\callsel\callconn.c
E25505 v_dialer\dialer\src\callsel\callconn.c
E27000 midtier\unixdev\ServiceMonitor\src\ServiceMonitor_ServiceController.cxxmidtier\unixdev\SysHealth\src\SystemHealthImpl.cppv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
E27100 midtier\unixdev\ServiceMonitor\src\ServiceMonitor_ServiceController.cxxmidtier\unixdev\ServiceMonitor\src\ServiceMonitor_ServiceMonitorIFImpl.cxxmidtier\unixdev\SysHealth\src\SystemHealthImpl.cppv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
E27200
202 Maintenance and Troubleshooting Guide March 2008
E27300 midtier\unixdev\ServiceActivation\src\SARequest.cxxmidtier\unixdev\ServiceActivation\src\ServiceActivationIFImpl.cxxmidtier\unixdev\ServiceMonitor\src\ServiceMonitor_ServiceMonitorIFImpl.cxxv_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
E28000 v_dialer\dialer\src\core\switcher.c Failed to initialize switcher
E28100 v_dialer\dialer\src\core\driver.c Failed to attach shared memory
E28101 v_dialer\dialer\src\core\driver.c invalid channel number <string>
E28102
E28103 v_dialer\dialer\src\core\driver.c
E28104 v_dialer\dialer\src\core\driver.c
E28105
E28106 v_dialer\dialer\src\core\driver.c
E28107 v_dialer\dialer\src\core\driver.c
E28108 v_dialer\dialer\src\core\driver.c
E28109 v_dialer\dialer\src\core\driver.c
E28200 v_dialer\dialer\src\core\conn_mgr.c
E28201 v_dialer\dialer\src\core\conn_mgr.c
E28202 v_dialer\dialer\src\core\conn_mgr.c
E28203 v_dialer\dialer\src\core\conn_mgr.c
E28204 v_dialer\dialer\src\core\conn_mgr.c
E28205 v_dialer\dialer\src\core\conn_mgr.c
E28206 v_dialer\dialer\src\core\conn_mgr.c
E28207 v_dialer\dialer\src\core\conn_mgr.c
E28208 v_dialer\dialer\src\core\conn_mgr.c
E28209 v_dialer\dialer\src\core\conn_mgr.c
E28210 v_dialer\dialer\src\core\conn_mgr.c
E28211 v_dialer\dialer\src\core\conn_mgr.c
Maintenance and Troubleshooting Guide March 2008 203
E28300
E28301 v_dialer\dialer\src\core\recall_rmp.c
E28302 v_dialer\dialer\src\core\recall_rmp.c
E28303 v_dialer\dialer\src\core\recall_rmp.c
E28304 v_dialer\dialer\src\core\recall_rmp.c
E28305 v_dialer\dialer\src\core\recall_rmp.c
E28306 v_dialer\dialer\src\core\recall_rmp.c
E28307 v_dialer\dialer\src\core\recall_rmp.c
E28308 v_dialer\dialer\src\core\recall_rmp.c
E28309 v_dialer\dialer\src\core\recall_rmp.c
E28310 v_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\recall_rmp.c
E28400 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E28401 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E28402 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E28404 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E28405 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E28406 v_dialer\dialer\src\core\listops.c
E28407 v_dialer\dialer\src\core\listops.c
204 Maintenance and Troubleshooting Guide March 2008
E28408 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\nuisance.c
E28409 v_dialer\dialer\src\core\caller.c
E28410 v_dialer\dialer\src\core\caller.c
E28411 v_dialer\dialer\src\core\caller.c
E28412 v_dialer\dialer\src\core\caller.c
E28413, E28414
E28415 v_dialer\dialer\src\core\caller.c
E28416 v_dialer\dialer\src\core\caller.c
E28417 v_dialer\dialer\src\core\listops.c
E28418 v_dialer\dialer\src\core\listops.c
E28419 v_dialer\dialer\src\core\listops.c
E28420 v_dialer\dialer\src\core\listops.c
E28421 v_dialer\dialer\src\core\listops.c
E28422 v_dialer\dialer\src\core\listops.c
E28423 v_dialer\dialer\src\core\listops.c
E28424 v_dialer\dialer\src\core\listops.c
E28425 v_dialer\dialer\src\core\listops.c
E28426 v_dialer\dialer\src\core\listops.c
E28427 v_dialer\dialer\src\core\listops.c
E28428 v_dialer\dialer\src\core\listops.cv_dialer\dialer\DialerCmdCtrl\ErrorHandling_utest.cpp
E28429 v_dialer\dialer\src\core\caller.c
E28430 v_dialer\dialer\src\core\caller.c
E28431 v_dialer\dialer\src\core\job_strter.c
E28432 v_dialer\dialer\src\core\job_strter.c
E28433 v_dialer\dialer\src\core\job_strter.c
Maintenance and Troubleshooting Guide March 2008 205
E28434 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\job_strter.c
E28435 v_dialer\dialer\src\core\job_strter.c
E28436 v_dialer\dialer\src\core\job_strter.c
E28437 v_dialer\dialer\src\core\job_strter.c
E28438 v_dialer\dialer\src\core\job_strter.c
E28439 v_dialer\dialer\src\core\caller.c
E28440 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\caller.c
E28441 v_dialer\dialer\src\core\caller.c
E28442 v_dialer\dialer\src\core\caller.c
E28443 v_dialer\dialer\src\core\listops.c
E28444
E28445 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\joblib.c
E28446
E28447 v_dialer\dialer\src\core\caller.c
E28448 v_dialer\dialer\src\core\caller.c
E28449 v_dialer\dialer\src\core\caller.c
E28450 v_dialer\dialer\src\core\listops.c
E28451 v_dialer\dialer\src\core\listops.c
E28452 v_dialer\dialer\src\core\listops.c
E28453 v_dialer\dialer\src\core\listops.c
E28454 v_dialer\dialer\src\core\listops.c
E28455 v_dialer\dialer\src\core\listops.c
E28456 v_dialer\dialer\src\core\listops.c
E28457 v_dialer\dialer\src\core\listops.c
E28458 v_dialer\dialer\src\core\listops.c
E28459 v_dialer\dialer\src\core\listops.c
E28460 v_dialer\dialer\src\core\listops.c
206 Maintenance and Troubleshooting Guide March 2008
E28461 v_dialer\dialer\src\core\listops.c
E28462 v_dialer\dialer\src\core\listops.c
E28463 v_dialer\dialer\src\core\port_hndle.c
E28464 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.c
E28465
E28600 v_dialer\dialer\src\core\porter.c
E28601 v_dialer\dialer\src\core\porter.c
E28602 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\utility\list_status.cv_dialer\dialer\enforcer\src\enforcer.cppv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\core\recall_rmp.c
E28603 v_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\core\port_hndle.cv_dialer\dialer\src\core\portevent.cv_dialer\dialer\src\core\porter.c
E28604, E28605
E28606 v_dialer\dialer\src\core\scripter.c
E28607 v_dialer\dialer\src\core\scripter.c
E28608 v_dialer\dialer\src\core\scripter.c
E28609 v_dialer\dialer\src\core\scripter.c
E28610
E28611 v_dialer\dialer\src\core\scripter.c
E28612 v_dialer\dialer\src\core\scripter.c
E28613 v_dialer\dialer\src\core\scripter.c
E28614 v_dialer\dialer\src\core\scripter.c
E28615
E28616 v_dialer\library\libdsi\src\script_lng.c
E28617 v_dialer\dialer\src\core\listops.c
Maintenance and Troubleshooting Guide March 2008 207
E28618 v_dialer\dialer\src\core\listops.c
E28619 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E28620 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E28621-E28625
E28626 v_dialer\dialer\src\core\porter.c
E28627 v_dialer\dialer\src\core\porter.c
E28628 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\core\scripter.c
E28629 v_dialer\dialer\src\core\scripter.c
E28630 v_dialer\dialer\src\core\scripter.c
E28631 v_dialer\dialer\src\core\scripter.c
E28632 v_dialer\dialer\src\core\scripter.c
E28633 v_dialer\dialer\src\core\scripter.c
E28634 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E28800 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid delay specification
E28801 v_dialer\dialer\src\core\screen.c Record currently in use
E28802 v_dialer\dialer\src\core\screen.c Recall not allowed for inbound call
E28803
E28804 v_dialer\dialer\src\core\agent.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Job <name> not running
208 Maintenance and Troubleshooting Guide March 2008
E28805 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Job <name> not running
E28806-E28811
E28812 v_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\operator.c
Agent <name> logged in Already - Access Denied
E28813 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
<type> agents are not permitted on this job
E28814 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
<type> agents are not permitted on this job
E28815 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Sales verification with unit work lists is not permitted
E28816 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Inbound agents only permitted
E28817 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Outbound agents only permitted
E28818 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Outbound or Managed agents only permitted
E28819 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Only outbound agents permitted by sales verification
E28820 v_dialer\dialer\src\core\operator.c Unit value not found, or unavailable
E28821 v_dialer\dialer\src\core\screen.c Cannot be DONE from alternate screen
E28822 v_dialer\dialer\src\core\screen.c Line not released
E28823
E28824 v_dialer\dialer\src\core\screen.c Changes to record not saved
E28825 v_dialer\dialer\src\core\screen.c Changes to record not saved
E28826 v_dialer\dialer\src\core\screen.c Record is no longer available
E28827 v_dialer\dialer\src\core\screen.c Failed to unlock file
E28828 v_dialer\dialer\src\core\screen.cv_dialer\dialer\src\utility\shmon.c
Unknown screen type
E28829 v_dialer\dialer\src\core\screen.c Field entry is required
Maintenance and Troubleshooting Guide March 2008 209
E28830 v_dialer\dialer\src\core\screen.c Field value not in acceptable list
E28831 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Field has non-numeric value
E28832 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid date format
E28833 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid date format
E28834 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid date format
E28835 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid date format
E28836 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid format character found
E28837 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid time format
E28838 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid time format
E28839 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid time format
E28840 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid time format
E28841 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid phone
E28842 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid phonestat - <status>
E28843 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid phone <number>
E28844 v_dialer\dialer\src\core\screen.c No REL_DIST setting
E28845 v_dialer\dialer\src\core\screen.c No REL_TME setting
E28846 v_dialer\dialer\src\core\screen.c No DONE_TME setting
E28847 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Date is before the current date
210 Maintenance and Troubleshooting Guide March 2008
E28848 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Recall time and date outside timezone
E28849 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Missing or invalid time zone designation
E28850 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\screen.c
Cannot open channel to operator monitor process
E28851 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\screen.c
Operator monitor process does not respond
E28852-E28855
E28856 v_dialer\dialer\src\core\screen.c Invalid response from operator monitor process
E28857
E28858 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\operator.c
<agent_name> - Exceeded operator slots available, MAXOPS is low
E28859 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\operator.c
<agent><agent_name> - Operator number returned invalid <slot_num>
E28860 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
<string><string>- Operator number returned wrong <num1>, job number <num2>
E28861 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\operator.c
Operator slot semaphore not available
E28862 v_dialer\dialer\src\core\agent.c Fatal error on select - <num>
E28863 v_dialer\dialer\src\core\agent.c ERROR - Unknown file descriptor
E28864 v_dialer\dialer\src\core\agent_io_util.cv_dialer\dialer\src\core\job_strter.c
Unknown IPC message - <string>
E28865 v_dialer\dialer\src\core\agent_io_util.c Unknown Command message - <command>
Maintenance and Troubleshooting Guide March 2008 211
E28866 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\screen.c
Telephone line not available
E28867 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\agent_tdss_util.c
Telephone line not offhook
E28868 v_dialer\dialer\src\core\agent.c Callbacks are not permitted on inbound calls
E28869 v_dialer\dialer\src\core\agent.c
E28870 v_dialer\dialer\src\core\agent_hs_util.c
E28871 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
E28872 v_dialer\dialer\src\core\agent_hs_util.c
E28873 v_dialer\dialer\src\core\agent_hs_util.c
E28874 v_dialer\dialer\src\core\agent_hs_util.c
E28875 v_dialer\dialer\src\core\agent_hs_util.c
E28876 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
E28877 v_dialer\dialer\src\core\agent_hs_util.c
E28878, E28879
E28880 v_dialer\dialer\src\core\agent_hs_util.c
E28881 v_dialer\dialer\src\core\agent_hs_util.c
E28882 v_dialer\dialer\src\core\agent.c
E28883 v_dialer\dialer\src\core\agent.c
E28884 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
E28885 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\agent_pvrs_util.c
212 Maintenance and Troubleshooting Guide March 2008
E28886 v_dialer\dialer\src\core\agent.c
E28887 v_dialer\dialer\src\core\agent.c
E28888 v_dialer\dialer\src\core\agent.c
E28889 v_dialer\dialer\src\core\agent.c
E28890 v_dialer\dialer\src\core\agent.c
E28891 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
E28892 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
E28893 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
E28894 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
E28895 v_dialer\dialer\src\core\agent.c
E28896 v_dialer\dialer\src\core\agent.c
E28897 v_dialer\dialer\src\core\agent.c
E28898 v_dialer\dialer\src\core\agent.c
E28899 v_dialer\dialer\src\core\agent.c
E28900 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\agent_hs_util.c
E28901 v_dialer\dialer\src\core\agent.c
E28902 v_dialer\dialer\src\core\agent.c
E28903 v_dialer\dialer\src\core\agent.c
E28904 v_dialer\dialer\src\core\agent.c
E28905 v_dialer\dialer\src\core\agent.c
E28906 v_dialer\dialer\src\core\agent.c
E28907 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_pvrs_util.c
E28908 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_pvrs_util.c
Maintenance and Troubleshooting Guide March 2008 213
E28909 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_pvrs_util.c
E28910 v_dialer\dialer\src\core\agent.c
E28911 v_dialer\dialer\src\core\agent.c
E28912 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
E28913 v_dialer\dialer\src\core\agent.c
E28914 v_dialer\dialer\src\core\agent.c
E28915 v_dialer\dialer\src\core\agent.c
E28916 v_dialer\dialer\src\core\agent_misc_util.c
E28917 v_dialer\dialer\src\core\agent.c
E28918 v_dialer\dialer\src\core\agent.c
E28919 v_dialer\dialer\src\core\agent.c
E28920 v_dialer\dialer\src\core\agent_hs_util.c
E28921 v_dialer\dialer\src\core\agent_misc_util.c
E28922 v_dialer\dialer\src\core\agent_hs_util.c
E28923 v_dialer\dialer\src\core\agent_hs_util.c
E28924 v_dialer\dialer\src\core\agent_io_util.c
E28925 v_dialer\dialer\src\core\agent_misc_util.c
E28926 v_dialer\dialer\src\core\agent_misc_util.c
E28927 v_dialer\dialer\src\core\agent.c
E28928 v_dialer\dialer\src\core\agent.c
E28929 v_dialer\dialer\src\core\agent.c
E28930 v_dialer\dialer\src\core\agent.c
E28931 v_dialer\dialer\src\core\agent.c
E28932 v_dialer\dialer\src\core\agent.c
E28933 v_dialer\dialer\src\core\agent_io_util.c
E28934 v_dialer\dialer\src\core\agent_io_util.c
E28935 v_dialer\dialer\src\core\agent_misc_util.c
214 Maintenance and Troubleshooting Guide March 2008
E28936 v_dialer\dialer\src\core\agent.c
E28937 v_dialer\dialer\src\core\operator.c
E28938 v_dialer\dialer\src\core\api_jobctl.c
E28940 v_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\transfer.c
E28942 v_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\screen.c
E28943 v_dialer\dialer\src\core\screen.c
E28944 v_dialer\dialer\src\core\screen.c
E28945 v_dialer\dialer\src\core\operator.c
E28946 v_dialer\dialer\src\core\agent.c
E28947 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
E28948 v_dialer\dialer\src\core\joblib.c
E28949 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
E28950 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
E28951 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
E28952 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
E28953 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
E28954 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
E28955 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
E28956 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
E28957 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Maintenance and Troubleshooting Guide March 2008 215
E28958 v_dialer\dialer\src\core\donotcall.c
E28959 v_dialer\dialer\src\core\operator.c
E28960 v_dialer\dialer\src\core\dnc_mark.c
E28961 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\operator.c
E28962 v_dialer\dialer\src\core\operator.c
E28963 v_dialer\dialer\src\core\screen.c
E28964 v_dialer\dialer\src\core\agent.c
E28965 v_dialer\dialer\src\core\agent.c
E28966 v_dialer\dialer\src\core\operator.c
E28967 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\core\screen.c
E28968 v_dialer\dialer\src\core\operator.c
E28969 v_dialer\dialer\src\core\agent_pvrs_util.c
E28970 v_dialer\dialer\src\core\agent_pvrs_util.cv_dialer\dialer\src\core\operator.c
E28971 v_dialer\dialer\src\core\agent_pvrs_util.cv_dialer\dialer\src\core\oper_pvrs.cv_dialer\dialer\src\core\screen.c
E28972 v_dialer\dialer\src\core\agent_pvrs_util.cv_dialer\dialer\src\core\oper_pvrs.cv_dialer\dialer\src\core\screen.c
E28973 v_dialer\dialer\src\core\agent_pvrs_util.cv_dialer\dialer\src\core\oper_pvrs.cv_dialer\dialer\src\core\screen.c
E28974 v_dialer\dialer\src\core\agent_pvrs_util.cv_dialer\dialer\src\core\screen.c
E28975 v_dialer\dialer\src\core\screen.c
E28976 v_dialer\dialer\src\core\screen.c
E28977 v_dialer\dialer\src\core\operator.c
E28978 v_dialer\dialer\src\core\operator.c
216 Maintenance and Troubleshooting Guide March 2008
E28979 v_dialer\dialer\src\core\screen.c
E28980 v_dialer\dialer\src\core\screen.c
E28981 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
E28982 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
E28983 v_dialer\dialer\src\core\agent.c
E28984 v_dialer\dialer\src\core\agent.c
E29000 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\api_jobctl.c
E29001 v_dialer\dialer\src\core\api_jobctl.c
E29002 v_dialer\dialer\src\core\api_jobctl.c
E29006 v_dialer\dialer\src\core\api_jobctl.c
E29007
E29008
E29009 v_dialer\dialer\src\core\api_jobctl.c
E29010 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\joblib.c
E29011 v_dialer\dialer\src\core\api_jobctl.c
E29012 v_dialer\dialer\src\core\api_jobctl.c
E29014 v_dialer\dialer\src\core\api_jobctl.c
E29015 v_dialer\dialer\src\core\api_jobctl.c
E29016 v_dialer\dialer\src\core\api_jobctl.c
E29017 v_dialer\dialer\src\core\api_jobctl.c
E29018 v_dialer\dialer\src\core\api_jobctl.c
E29019 v_dialer\dialer\src\core\joblib.c
E29020 v_dialer\dialer\src\core\api_jobctl.c
E29021 v_dialer\dialer\src\core\api_jobctl.c
E29022 v_dialer\dialer\src\core\api_jobctl.c
E29023 v_dialer\dialer\src\core\api_jobctl.c
Maintenance and Troubleshooting Guide March 2008 217
E29024 v_dialer\dialer\src\core\api_jobctl.c
E29025 v_dialer\dialer\src\core\api_jobctl.c
E29026 v_dialer\dialer\src\core\api_jobctl.c
E29027 v_dialer\dialer\src\core\api_jobctl.c
E29028 v_dialer\dialer\src\core\api_jobctl.c
E29029 v_dialer\dialer\src\core\api_jobctl.c
E29030 v_dialer\dialer\src\core\api_jobctl.c
E29031 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E29032 v_dialer\dialer\src\core\api_jobctl.c
E29033-E29035
E29036 v_dialer\dialer\src\core\joblib.c
E29037 v_dialer\dialer\src\core\joblib.c
E29038 v_dialer\dialer\src\core\joblib.c
E29039
E29040 v_dialer\dialer\src\core\api_jobctl.c
E29041
E29042 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\iicb_conf.c
E29043 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\iicb_conf.c
E29044 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\iicb_conf.c
E29045 v_dialer\dialer\src\core\iicb_conf.c
E29046 v_dialer\dialer\src\core\iicb_conf.c
E29047 v_dialer\dialer\src\core\iicb_conf.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E29048 v_dialer\dialer\src\core\iicb_conf.c
E29049 v_dialer\dialer\src\core\iicb_conf.c
218 Maintenance and Troubleshooting Guide March 2008
E29050 v_dialer\dialer\src\core\iicb_conf.c
E29051 v_dialer\dialer\src\core\install_ext.c
E29052 v_dialer\dialer\src\core\install_ext.c
E29053 v_dialer\dialer\src\core\install_ext.c
E29054 v_dialer\dialer\src\core\install_ext.c
E29055 v_dialer\dialer\src\core\install_ext.c
E29056 v_dialer\dialer\src\core\api_jobctl.c
E29057 v_dialer\dialer\src\core\api_jobctl.c
E29150 v_dialer\dialer\src\core\beeper.c
E29151 v_dialer\dialer\src\core\beeper.c
E29152 v_dialer\dialer\src\core\beeper.c
E29153 v_dialer\dialer\src\core\beeper.c
E29154 v_dialer\dialer\src\core\beeper.c
E29200 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\core\agent_tdss_util.c
E29201
E29202
Maintenance and Troubleshooting Guide March 2008 219
E29203 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\beeper.cv_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\operator.cv_dialer\ivr\src\ivr_config.cv_dialer\ivr\src\ivr_conn.cv_dialer\dialer\src\utility\mem_dump.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\core\recall_rmp.cv_dialer\dialer\src\utility\shmon.c
E29204 v_dialer\dialer\src\core\conn_mgr.c
E29205 v_dialer\dialer\src\core\listops.c
E29206 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
E29207 v_dialer\dialer\src\core\screen.c
E29208 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\driver.cv_dialer\dialer\src\core\msg_loader.c
E29210 v_dialer\dialer\src\core\msg_loader.c
E29212 v_dialer\dialer\src\core\msg_loader.c
E29213 v_dialer\dialer\src\core\msg_loader.cv_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
E29214 v_dialer\dialer\src\core\msg_loader.cv_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
E29400 v_dialer\dialer\src\core\testmsg.c
E29500 v_dialer\dialer\src\core\ao_recall.c
E29501 v_dialer\dialer\src\core\ao_recall.c
220 Maintenance and Troubleshooting Guide March 2008
E29502 v_dialer\dialer\src\core\ao_recall.c
E29503 v_dialer\dialer\src\core\ao_recall.c
E29505 v_dialer\dialer\src\core\ao_recall.c
E29600 - E29608
E29700 v_dialer\dialer\src\core\joblist_ed.c
E29701 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
E29702 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
E29703 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
E29704 v_dialer\dialer\src\core\ld_joblist.c
E29705 v_dialer\dialer\src\core\ld_joblist.c
E29706 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
E29707 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
E29708 v_dialer\dialer\src\core\operator.c
E29709 v_dialer\dialer\src\core\joblist_ed.c
E29710 v_dialer\dialer\src\core\ld_joblist.c
E29711 v_dialer\dialer\src\core\ld_joblist.c
E29712 v_dialer\dialer\src\core\ld_joblist.c
E29714 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
E29715 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
E29716 v_dialer\dialer\src\core\joblist_ed.c
E29717 v_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
E29718 v_dialer\dialer\src\core\ld_joblist.c
Maintenance and Troubleshooting Guide March 2008 221
E29719 v_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
E29800 v_dialer\dialer\src\core\chainhandler.c
E29900 v_dialer\dialer\src\core\job_strter.c
E29901 v_dialer\dialer\src\core\job_strter.c
E29902 v_dialer\dialer\src\core\job_strter.c
E29903 v_dialer\dialer\src\core\job_strter.c
E29904 v_dialer\dialer\src\core\job_strter.c
E29950 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\screen.c
E29951 v_dialer\dialer\src\core\port_hndle.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E30000-E30019
E31200 v_dialer\dialer\src\custom\readwrt.c
E31400 v_dialer\dialer\src\custom\atohex.c
E32000 v_dialer\dialer\src\dbconst\readtape.c
E32001 v_dialer\dialer\src\dbconst\readtape.c
E32002 v_dialer\dialer\src\dbconst\readtape.c
E32003 v_dialer\dialer\src\dbconst\readtape.c
E32004 v_dialer\dialer\src\dbconst\readtape.c
E32005 v_dialer\dialer\src\dbconst\readtape.c
E32005 v_dialer\dialer\src\dbconst\readtape.c
E32006 v_dialer\dialer\src\dbconst\readtape.c
E32007 v_dialer\dialer\src\dbconst\readtape.c
E32008 v_dialer\dialer\src\dbconst\readtape.c
E32400 v_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
222 Maintenance and Troubleshooting Guide March 2008
E32401 v_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
E32402 v_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
E32403 v_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
E32404 v_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
E32405 v_dialer\dialer\src\dbconst\readtape.c
E32600 v_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\DialerCmdCtrl\VoicemsgCfgTable.cpp
E32601
E32602 v_dialer\dialer\src\dbconst\moj_conv.c
E32603 v_dialer\dialer\src\dbconst\moj_conv.c
E32604 v_dialer\dialer\src\dbconst\moj_conv.c
E32605 v_dialer\dialer\src\dbconst\moj_conv.c
E32606
E32607 v_dialer\dialer\src\dbconst\moj_conv.c
E34000 v_dialer\dialer\src\lettergen\formlet.c
E34001 v_dialer\dialer\src\lettergen\formlet.c
E35000 v_dialer\dialer\src\lstextract\ext_data.c
E35001 v_dialer\dialer\src\lstextract\ext_data.c
E35002 v_dialer\dialer\src\lstextract\ext_data.c
E35200 v_dialer\dialer\src\lstextract\ext_list.c
E35201 v_dialer\dialer\src\lstextract\ext_list.c
E36000 v_dialer\dialer\src\dbmaint\record_ed.c
E36001 v_dialer\dialer\src\dbmaint\record_ed.c
E36002 v_dialer\dialer\src\dbmaint\record_ed.c
E36003 v_dialer\dialer\src\dbmaint\record_ed.c
E36004 v_dialer\dialer\src\dbmaint\record_ed.c
Maintenance and Troubleshooting Guide March 2008 223
E36005 v_dialer\dialer\src\dbmaint\record_ed.c
E36006 v_dialer\dialer\src\dbmaint\redit_scrn.c
E36101 v_dialer\dialer\src\dbmaint\rec_update.c
E36200 v_dialer\dialer\src\dbmaint\redit_scrn.c
E36201 v_dialer\dialer\src\core\dnc_mark.c
E36202 v_dialer\dialer\src\core\dnc_mark.c
E36203
E37000 v_dialer\admin\src\createop.c
E37001 v_dialer\admin\src\createop.c
E37002 v_dialer\admin\src\createop.c
E37003 v_dialer\admin\src\createop.c
E37004 v_dialer\admin\src\createop.c
E37005 v_dialer\admin\src\createop.c
E37006 v_dialer\admin\src\createop.c
E37007
E37008 v_dialer\admin\src\createop.c
E37009
E37010 v_dialer\admin\src\createop.cv_dialer\ivr\src\ivr_config.c
E37011 v_dialer\admin\src\createop.cv_dialer\ivr\src\ivr_config.c
E37012 v_dialer\admin\src\createop.c
E37013 v_dialer\admin\src\createop.c
E37014 v_dialer\admin\src\createop.c
E37015 v_dialer\admin\src\createop.c
E37016 v_dialer\admin\src\createop.c
E37017 v_dialer\admin\src\createop.c
E37018 v_dialer\admin\src\createop.c
E37019 v_dialer\admin\src\createop.c
224 Maintenance and Troubleshooting Guide March 2008
E37020 v_dialer\admin\src\createop.c
E37021 v_dialer\admin\src\createop.c
E37022 v_dialer\admin\src\createop.c
E37023 v_dialer\admin\src\createop.cv_dialer\ivr\src\ivr_config.c
E37024 v_dialer\admin\src\createop.cv_dialer\ivr\src\ivr_config.c
E37025 v_dialer\admin\src\createop.c
E37026 v_dialer\admin\src\createop.c
E37027 v_dialer\admin\src\createop.c
E37028 v_dialer\admin\src\createop.c
E37029 v_dialer\admin\src\createop.c
E37030 v_dialer\admin\src\createop.c
E37031 v_dialer\admin\src\createop.c
E37032 v_dialer\admin\src\createop.c
E37033
E37034 v_dialer\admin\src\createop.c
E37035 v_dialer\admin\src\createop.c
E37036 v_dialer\admin\src\createop.c
E37037 v_dialer\admin\src\createop.c
E37038 v_dialer\admin\src\createop.c
E37039
E37200 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37201 v_dialer\dialer\src\editor\config_ed.c
E37202 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37203
Maintenance and Troubleshooting Guide March 2008 225
E37204 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37205 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37206, E37207
E37208 v_dialer\dialer\src\editor\config_ed.c
E37209, E37210
E37211 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37212 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37213 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37214 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37215, E37216
E37217 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37218 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37219 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37220 v_dialer\dialer\src\editor\config_ed.c
E37221 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
226 Maintenance and Troubleshooting Guide March 2008
E37222 v_dialer\dialer\src\editor\config_ed.c
E37223 v_dialer\dialer\src\editor\config_ed.c
E37224 v_dialer\dialer\src\editor\config_ed.c
E37225 v_dialer\dialer\src\editor\config_ed.c
E37226 v_dialer\dialer\src\editor\config_ed.c
E37227 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37228
E37229 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37230
E37231 v_dialer\dialer\src\editor\config_ed.c
E37232 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37233 v_dialer\dialer\src\editor\config_ed.c
E37234 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37235 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37236 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37237 v_dialer\dialer\src\editor\config_ed.c
E37238 v_dialer\dialer\src\editor\config_ed.c
E37239 v_dialer\dialer\src\editor\config_ed.c
E37240 v_dialer\dialer\src\editor\config_ed.c
E37241 v_dialer\dialer\src\editor\config_ed.c
E37242 v_dialer\dialer\src\editor\config_ed.c
Maintenance and Troubleshooting Guide March 2008 227
E37243 v_dialer\dialer\src\editor\config_ed.c
E37244 v_dialer\dialer\src\editor\config_ed.c
E37245 v_dialer\dialer\src\editor\config_ed.c
E37246 v_dialer\dialer\src\editor\config_ed.c
E37247 v_dialer\dialer\src\editor\config_ed.c
E37248 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37249 v_dialer\dialer\src\editor\config_ed.c
E37250 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37251 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37252 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37253 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37254 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37255
E37256 v_dialer\dialer\src\editor\config_ed.c
E37300 v_dialer\admin\src\termprocess.c
E37301 v_dialer\admin\src\termprocess.c
E37400 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37401
E37402 v_dialer\dialer\src\editor\config_ed.c
E37403 v_dialer\dialer\src\editor\config_ed.c
228 Maintenance and Troubleshooting Guide March 2008
E37404 v_dialer\dialer\src\editor\config_ed.c
E37405 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E37500 v_dialer\admin\src\signalit.c
E37501 v_dialer\admin\src\signalit.c
E37502 v_dialer\admin\src\signalit.c
E37503 v_dialer\admin\src\signalit.c
E37503 v_dialer\dialer\src\utility\agentcount.c
E37600 v_dialer\dialer\src\editor\master_ed.c
E37601 v_dialer\dialer\src\editor\master_ed.c
E37602 v_dialer\dialer\src\editor\master_ed.c
E37603 v_dialer\dialer\src\editor\master_ed.c
E37604 v_dialer\dialer\src\editor\master_ed.c
E37800 v_dialer\admin\src\addgroup.c
E37801
E37802 v_dialer\admin\src\addgroup.c
E38000 v_dialer\dialer\src\markrec\chkentdt.c
E38001
E38002 v_dialer\dialer\src\markrec\chkentdt.c
E38003 v_dialer\dialer\src\markrec\chkentdt.c
E38004 v_dialer\dialer\src\markrec\chkentdt.c
E38400 v_dialer\dialer\src\markrec\latemrk.c
E38401
E38402 v_dialer\dialer\src\markrec\latemrk.c
E38403 v_dialer\dialer\src\markrec\latemrk.c
E38404 v_dialer\dialer\src\markrec\latemrk.c
E38405 v_dialer\dialer\src\markrec\latemrk.c
E38406 v_dialer\dialer\src\markrec\latemrk.c
Maintenance and Troubleshooting Guide March 2008 229
E38600 v_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\markrec\set_field.c
E38601 v_dialer\dialer\src\markrec\set_field.c
E38602 v_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\markrec\set_field.c
E38603 v_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\markrec\set_field.c
E38604 v_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\markrec\set_field.c
E38605 v_dialer\dialer\src\markrec\get_field.c
E38800 v_dialer\dialer\src\markrec\latelst.c
E38801
E38802
E39000
E39001 v_dialer\dialer\src\menu\menu.c
E39002 v_dialer\dialer\src\menu\menu.c
E39003 v_dialer\dialer\src\menu\menu.c
E39004 v_dialer\dialer\src\menu\menu.c
E39005 v_dialer\dialer\src\menu\menu.c
E39200 v_dialer\dialer\src\menu\submenu.c
E39201 v_dialer\dialer\src\menu\submenu.c
E39202 v_dialer\dialer\src\menu\submenu.c
E40000 v_dialer\dialer\src\pcextract\brkfile.c
E40001 v_dialer\dialer\src\pcextract\brkfile.c
E40002 v_dialer\dialer\src\pcextract\fileops.c
E40003 v_dialer\dialer\src\pcextract\brkfile.c
E40200 v_dialer\dialer\src\pcextract\fileops.c
E40201 v_dialer\dialer\src\pcextract\fileops.c
E40202 v_dialer\dialer\src\pcextract\fileops.c File <filename> does not exist
E40203 v_dialer\dialer\src\pcextract\fileops.c
230 Maintenance and Troubleshooting Guide March 2008
E40204 v_dialer\dialer\src\pcextract\fileops.c
E40400 v_dialer\dialer\src\pcextract\msetup.c
E40401 v_dialer\dialer\src\pcextract\msetup.c
E42000 v_dialer\dialer\src\preprocess\de_reject.c
E42100 v_dialer\dialer\src\preprocess\ij_merge.c
E42101 v_dialer\dialer\src\preprocess\ij_merge.c
E42400 v_dialer\dialer\src\preprocess\clhashin.c
E42401
E42402 v_dialer\dialer\src\preprocess\clhashin.c
E42403 v_dialer\dialer\src\preprocess\clhashin.c
E42404 v_dialer\dialer\src\preprocess\clhashin.c
E42405 v_dialer\dialer\src\preprocess\clhashin.c
E42406 v_dialer\dialer\src\preprocess\clhashin.c
E42600-42617
E42800
E42801 v_dialer\dialer\src\preprocess\setzones.c
E43000 v_dialer\dialer\src\preprocess\update_cl.c
E43001 v_dialer\dialer\src\preprocess\update_cl.c
E43002 v_dialer\dialer\src\preprocess\update_cl.c
E43200
E43201
E43400 v_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
E43401 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
Maintenance and Troubleshooting Guide March 2008 231
E43402 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
E43403 v_dialer\dialer\src\preprocess\update_upl.c
E43404 v_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\update_upl.c
E43405 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
E43406 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
E43407 v_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\update_upl.c
E43408 v_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
E43500 v_dialer\dialer\src\preprocess\msgmap.c
E43501 v_dialer\dialer\src\preprocess\msgmap.c
E43502 v_dialer\dialer\src\preprocess\msgmap.c
E43503 v_dialer\dialer\src\preprocess\msgmap.c
E43504 v_dialer\dialer\src\preprocess\msgmap.c
E43505 v_dialer\dialer\src\preprocess\msgmap.c
E43506 v_dialer\dialer\src\preprocess\msgmap.c
E43507 v_dialer\dialer\src\preprocess\msgmap.c
E43508
E43509 v_dialer\dialer\src\preprocess\msgmap.c
E43510 v_dialer\dialer\src\preprocess\msgmap.c
E43511 v_dialer\dialer\src\preprocess\msgmap.c
232 Maintenance and Troubleshooting Guide March 2008
E43512 v_dialer\dialer\src\preprocess\msgmap.c
E44000 v_dialer\dialer\src\reports\history\hist_rpt.c
E44001 v_dialer\dialer\src\reports\history\hist_rpt.c
E44002 v_dialer\dialer\src\reports\history\hist_rpt.c
E44003 v_dialer\dialer\src\reports\history\hist_rpt.c
E44004 v_dialer\dialer\src\reports\history\hist_rpt.c
E44005 v_dialer\dialer\src\reports\history\hist_rpt.c
E44006 v_dialer\dialer\src\reports\history\hist_rpt.c
E44007 v_dialer\dialer\src\reports\history\hist_rpt.c
E44008 v_dialer\dialer\src\reports\history\hist_rpt.c
E44009 v_dialer\dialer\src\reports\history\hist_rpt.c
E44010 v_dialer\dialer\src\reports\history\hist_rpt.c
E44011 v_dialer\dialer\src\reports\history\hist_rpt.c
E44012 v_dialer\dialer\src\reports\history\hist_rpt.c
E44013 v_dialer\dialer\src\reports\history\hist_rpt.c
E44014 v_dialer\dialer\src\reports\history\hist_rpt.c
E45000
E45001 v_dialer\dialer\src\reports\rpt_mgr\rpt_view.c
E45200, E45201
Maintenance and Troubleshooting Guide March 2008 233
E45202 v_dialer\dialer\src\reports\rpt_mgr\pds_view.c
E46200 v_dialer\dialer\src\reports\reportgen\reportexp.cv_dialer\dialer\src\reports\reportgen\reportsub.c
E46201 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46202 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46203 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46204 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46205 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46206 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46207 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46208 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46209 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46210 v_dialer\dialer\src\reports\reportgen\reportexp.cv_dialer\dialer\src\reports\reportgen\reportsub.cv_dialer\dialer\src\reports\reportgen\reportsel.cv_dialer\dialer\src\reports\reportgen\reportprn.c
E46211 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46212 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46213 v_dialer\dialer\src\reports\reportgen\reportexp.c
234 Maintenance and Troubleshooting Guide March 2008
E46214 v_dialer\dialer\src\reports\reportgen\reportexp.c
E46400 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46401 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46402 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46403 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46404 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46405 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46406 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46407 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46408 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46409 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46410 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46411 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46412 v_dialer\dialer\src\reports\reportgen\reportfmt.c
E46600 v_dialer\dialer\src\reports\reportgen\reporthlp.c
E46601 v_dialer\dialer\src\reports\reportgen\reporthlp.c
E46602 v_dialer\dialer\src\reports\reportgen\reporthlp.c
E46603 v_dialer\dialer\src\reports\reportgen\reportinit.c
E46800 v_dialer\dialer\src\reports\reportgen\reportinit.c
Maintenance and Troubleshooting Guide March 2008 235
E46801 v_dialer\dialer\src\reports\reportgen\reportinit.c
E46802 v_dialer\dialer\src\reports\reportgen\reportinit.c
E46803 v_dialer\dialer\src\reports\reportgen\reportinit.c
E46804 v_dialer\dialer\src\reports\reportgen\reportinit.c
E46805 v_dialer\dialer\src\reports\reportgen\reportinit.c
E46806 v_dialer\dialer\src\reports\reportgen\reportinit.c
E46807 v_dialer\dialer\src\reports\rptgen\reportconvert.cv_dialer\dialer\src\reports\reportgen\reportinit.cv_dialer\dialer\src\reports\reportgen\reportconvert_prev.c
E46808 v_dialer\dialer\src\reports\rptgen\reportconvert.cv_dialer\dialer\src\reports\reportgen\reportinit.cv_dialer\dialer\src\reports\reportgen\reportconvert_prev.c
E46809 v_dialer\dialer\src\reports\reportgen\reportinit.c
E46810 v_dialer\dialer\src\reports\reportgen\reportinit.cv_dialer\dialer\src\reports\reportgen\reportconvert_prev.cv_dialer\dialer\src\reports\rptgen\reportconvert.c
E46811 v_dialer\dialer\src\reports\reportgen\reportinit.cv_dialer\dialer\src\reports\reportgen\reportconvert_prev.cv_dialer\dialer\src\reports\rptgen\reportconvert.c
E47000
E47001 v_dialer\dialer\src\scrnbld\scrnbld.c
236 Maintenance and Troubleshooting Guide March 2008
E47002 v_dialer\dialer\src\scrnbld\scrnbld.c
E47003 v_dialer\dialer\src\scrnbld\scrnbld.c
E47004 v_dialer\dialer\src\scrnbld\scrnbld.c
E47005 v_dialer\dialer\src\scrnbld\scrnbld.c
E47006 v_dialer\dialer\src\scrnbld\scrnbld.c
E47007 v_dialer\dialer\src\scrnbld\scrnbld.c
E47008 v_dialer\dialer\src\scrnbld\scrnbld.c
E47009 v_dialer\dialer\src\scrnbld\scrnbld.c
E47010 v_dialer\dialer\src\scrnbld\scrnbld.c
E47011
E47012 v_dialer\dialer\src\scrnbld\scrnbld.c
E47013 v_dialer\dialer\src\scrnbld\scrnbld.c
E47014 v_dialer\dialer\src\scrnbld\scrnbld.c
E47015 v_dialer\dialer\src\scrnbld\scrnbld.c
E47016-E47018
E47019 v_dialer\dialer\src\scrnbld\sbld_block.c
E47020 v_dialer\dialer\src\scrnbld\sbld_block.c
E47021 v_dialer\dialer\src\scrnbld\sbld_block.c
E47022 v_dialer\dialer\src\scrnbld\sbld_block.c
E47023 v_dialer\dialer\src\scrnbld\sbld_block.c
E47024 v_dialer\dialer\src\scrnbld\sbld_block.c
E47025 v_dialer\dialer\src\scrnbld\scrnbld.c
E47026 v_dialer\dialer\src\scrnbld\scrnbld.c
E47027 v_dialer\dialer\src\scrnbld\scrnbld.c
E47028 v_dialer\dialer\src\scrnbld\scrnbld.c
E47029
E47030 v_dialer\dialer\src\scrnbld\scrnbld.c
E47031 v_dialer\dialer\src\scrnbld\scrnbld.c
Maintenance and Troubleshooting Guide March 2008 237
E47032 v_dialer\dialer\src\scrnbld\scrnbld.c
E47033 v_dialer\dialer\src\scrnbld\scrnbld.c
E47034 v_dialer\dialer\src\scrnbld\scrnbld.c
E47035 v_dialer\dialer\src\scrnbld\sbld_block.c
E47036 v_dialer\dialer\src\scrnbld\sbld_block.c
E47037 v_dialer\dialer\src\scrnbld\sbld_block.c
E47038 v_dialer\dialer\src\scrnbld\scrnbld.c
E47039 v_dialer\dialer\src\scrnbld\scrnbld.c
E47040 v_dialer\dialer\src\scrnbld\scrnbld.c
E47041
E49001 v_dialer\library\libcpp\src\Passwd.cpp
E50000 v_dialer\dialer\src\utility\adump.c
E50100 v_dialer\dialer\src\utility\agentcheck.cv_dialer\dialer\src\core\agent_misc_util.c
E50101 v_dialer\dialer\src\utility\agentcheck.c
E50200 v_dialer\dialer\src\utility\datetime.c
E50201 v_dialer\dialer\src\utility\datetime.c
E50202 v_dialer\dialer\src\utility\datetime.c
E50203 v_dialer\dialer\src\utility\datetime.c
E50204 v_dialer\dialer\src\utility\datetime.c
E50205 v_dialer\dialer\src\utility\datetime.c
E50206 v_dialer\dialer\src\utility\datetime.c
E50600 v_dialer\dialer\src\utility\enq_pty.c
E50601 v_dialer\dialer\src\utility\enq_pty.c
E50602 v_dialer\dialer\src\utility\enq_pty.c
E50603 v_dialer\dialer\src\utility\enq_pty.c
E50604 v_dialer\dialer\src\utility\enq_pty.c
E50605 v_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
238 Maintenance and Troubleshooting Guide March 2008
E50606-E50608
E50609 v_dialer\dialer\src\utility\enq_pty.c
E50610
E50611 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\utility\enq_pty.c
E50612 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\utility\enq_pty.c
E50613 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\utility\enq_pty.c
E50800
E51001 v_dialer\dialer\src\utility\fdictdump.c
E51200 v_dialer\dialer\src\utility\jobkeys.c
E51201
E51400
E51600 v_dialer\dialer\src\utility\portcorr.c
E51601 v_dialer\dialer\src\utility\portcorr.c
E52800 v_dialer\dialer\src\utility\ziptoarea.c
E52801 v_dialer\dialer\src\utility\ziptoarea.c
E52802 v_dialer\dialer\src\utility\ziptoarea.c
E52803 v_dialer\dialer\src\utility\ziptoarea.c
E52804 v_dialer\dialer\src\utility\ziptoarea.c
E52805 v_dialer\dialer\src\utility\ziptoarea.c
E52806 v_dialer\dialer\src\utility\ziptoarea.c
E53000 v_dialer\dialer\src\utility\copyfields.c
E53001 v_dialer\dialer\src\utility\copyfields.c
E53002 v_dialer\dialer\src\utility\copyfields.c
E53003 v_dialer\dialer\src\utility\copyfields.c
Maintenance and Troubleshooting Guide March 2008 239
E53004 v_dialer\dialer\src\utility\copyfields.c
E53005 v_dialer\dialer\src\utility\copyfields.c
E53006 v_dialer\dialer\src\utility\copyfields.c
E53007 v_dialer\dialer\src\utility\copyfields.c
E53008 v_dialer\dialer\src\utility\copyfields.c
E53009 v_dialer\dialer\src\utility\copyfields.c
E53010 v_dialer\dialer\src\utility\copyfields.c
E53011 v_dialer\dialer\src\utility\copyfields.c
E53012 v_dialer\dialer\src\utility\copyfields.c
E53013 v_dialer\dialer\src\utility\copyfields.c
E53014 v_dialer\dialer\src\utility\copyfields.c
E53015 v_dialer\dialer\src\utility\copyfields.c
E53016 v_dialer\dialer\src\utility\copyfields.c
E53017 v_dialer\dialer\src\utility\copyfields.c
E53018
E53019 v_dialer\dialer\src\utility\copyfields.c
E53020 v_dialer\dialer\src\utility\copyfields.c
E53021 v_dialer\dialer\src\utility\copyfields.c
E53022 v_dialer\dialer\src\utility\copyfields.c
E53023 v_dialer\dialer\src\utility\copyfields.c
E53650 v_dialer\dialer\src\imon\internetmon.c
E53651 v_dialer\dialer\src\imon\internetmon.c
E53652 v_dialer\dialer\src\imon\internetmon.c
E53654 v_dialer\dialer\src\imon\internetmon.c
E53655
E53800 v_dialer\dialer\src\utility\evmon.c
E53801 v_dialer\dialer\src\utility\evmon.c
E53802 v_dialer\dialer\src\utility\evmon.c
E53803 v_dialer\library\libdsi\src\script_lng.c
240 Maintenance and Troubleshooting Guide March 2008
E53804 v_dialer\dialer\src\utility\evmon.c
E53805 v_dialer\dialer\src\utility\evmon.c
E53806 v_dialer\dialer\src\utility\evmon.c
E53807 v_dialer\dialer\src\utility\evmon.c
E53808 v_dialer\library\libdsi\src\script_lng.c
E53809 v_dialer\dialer\src\utility\evmon.c
E53810 v_dialer\dialer\src\utility\evmon.c
E53811 v_dialer\dialer\src\utility\evmon.c
E53812
E53813 v_dialer\dialer\src\utility\evmon.c
E53814 v_dialer\dialer\src\utility\evmon.c
E53815 v_dialer\dialer\src\utility\evmon.c
E53816 v_dialer\dialer\src\utility\evmon.c
E53817 v_dialer\dialer\src\utility\evmon.c
E53818 v_dialer\dialer\src\utility\evmon.c
E53819 v_dialer\dialer\src\utility\evmon.c
E54100 v_dialer\dialer\src\listserver\listserver.c
E54101 v_dialer\dialer\src\listserver\listserver.c
E54102 v_dialer\dialer\src\listserver\listserver.c
E54103 v_dialer\dialer\src\listserver\listserver.c
E54104 v_dialer\dialer\src\listserver\listserver.c
E54105 v_dialer\dialer\src\listserver\listserver.c
E54106 v_dialer\dialer\src\listserver\listserver.c
E54107 v_dialer\dialer\src\listserver\listserver.c
E54108
E54109 v_dialer\dialer\src\listserver\listserver.c
E54110 v_dialer\dialer\src\listserver\listserver.c
E54111 v_dialer\dialer\src\listserver\listserver.c
E54112 v_dialer\library\libdsi\src\clutils.c
Maintenance and Troubleshooting Guide March 2008 241
E54113 v_dialer\dialer\src\listserver\listserver.c
E54114 v_dialer\dialer\src\listserver\listserver.c
E54115 v_dialer\dialer\src\listserver\listserver.c
E54120 v_dialer\dialer\src\listserver\listserver.cv_dialer\dialer\DialerCmdCtrl\VoicemsgCfgTable.cpp
E54121 v_dialer\dialer\src\listserver\listserver.c
E55000 v_dialer\dialer\src\reports\reportgen\reportprn.c
E55001 v_dialer\dialer\src\reports\reportgen\reportprn.c
E55002 v_dialer\dialer\src\reports\reportgen\reportprn.c
E55200 v_dialer\dialer\src\reports\reportgen\reportsel.c
E55201 v_dialer\dialer\src\reports\reportgen\reportsel.c
E55202 v_dialer\dialer\src\reports\reportgen\reportsel.c
E55203 v_dialer\dialer\src\reports\reportgen\reportsel.c
E55204 v_dialer\dialer\src\reports\reportgen\reportsel.c
E55205 v_dialer\dialer\src\reports\reportgen\reportsel.c
E55206 v_dialer\dialer\src\reports\reportgen\reportsel.c
E55207 v_dialer\dialer\src\reports\reportgen\reportsel.c
E55400 v_dialer\dialer\src\reports\reportgen\reportsub.c
242 Maintenance and Troubleshooting Guide March 2008
E55600 v_dialer\dialer\src\reports\reportgen\reportexp.cv_dialer\dialer\src\reports\reportgen\reportsel.cv_dialer\dialer\src\reports\reportgen\reportfmt.cv_dialer\dialer\src\reports\reportgen\reporthlp.c
E55601 v_dialer\dialer\src\reports\reportgen\reportsub.cv_dialer\ivr\src\ivr_supr.c
E56001 v_dialer\ivr\src\ivr_supr.c
E56002 v_dialer\ivr\src\ivr_supr.c
E56003 v_dialer\ivr\src\ivr_supr.c
E56004 v_dialer\ivr\src\ivr_config.c
E56005 v_dialer\ivr\src\ivr_config.c
E56006 v_dialer\ivr\src\ivr_config.c
E56007 v_dialer\ivr\src\ivr_config.c
E56008 v_dialer\ivr\src\ivr_config.c
E56009 v_dialer\ivr\src\ivr_config.c
E56010 v_dialer\ivr\src\ivr_config.c
E56011 v_dialer\ivr\src\ivr_config.c
E56012 v_dialer\ivr\src\ivr_config.c
E56013 v_dialer\ivr\src\ivr_config.c
E56014 v_dialer\ivr\src\ivr_config.c
E56015 v_dialer\ivr\src\ivr_config.c
E56016 v_dialer\ivr\src\ivr_config.c
E56017 v_dialer\ivr\src\ivr_config.c
E56018 v_dialer\ivr\src\ivr_config.c
E56019 v_dialer\ivr\src\ivr_config.c
E56020 v_dialer\ivr\src\ivr_conn.c
E56021 v_dialer\ivr\src\ivr_conn.c
Maintenance and Troubleshooting Guide March 2008 243
E56022 v_dialer\ivr\src\ivr_conn.c
E56023 v_dialer\ivr\src\ivr_conn.c
E56024 v_dialer\ivr\src\ivr_conn.c
E56025 v_dialer\ivr\src\ivr_conn.c
E56026 v_dialer\ivr\src\ivr_conn.c
E56027 v_dialer\ivr\src\ivr_conn.c
E56028 v_dialer\ivr\src\ivr_conn.c
E56029 v_dialer\ivr\src\ivr_conn.c
E56030 v_dialer\ivr\src\ivr_conn.c
E56031
E56032 v_dialer\ivr\src\ivr_conn.c
E56033 v_dialer\ivr\src\ivr_conn.c
E56034 v_dialer\ivr\src\ivr_conn.c
E56035 v_dialer\ivr\src\ivr_conn.c
E56036 v_dialer\ivr\src\ivr_conn.c
E56037 v_dialer\ivr\src\ivr_conn_io.c
E56038 v_dialer\ivr\src\ivr_conn_io.c
E56039 v_dialer\ivr\src\ivr_conn_io.c
E56040 v_dialer\ivr\src\ivr_conn_io.c
E56041 v_dialer\ivr\src\ivr_conn_io.c
E56042 v_dialer\ivr\src\ivr_conn_io.c
E56043 v_dialer\ivr\src\ivr_conn_io.c
E56044 v_dialer\ivr\src\ivr_conn.c
E56045 v_dialer\ivr\src\ivr_conn.c
E56046 v_dialer\ivr\src\ivr_conn.c
E56047 v_dialer\ivr\src\ivr_conn.c
E56048 v_dialer\ivr\src\ivr_conn.c
E56049 v_dialer\ivr\src\ivr_conn.c
E57000 v_dailer\dialer\dispatcher\dunupinit.c
244 Maintenance and Troubleshooting Guide March 2008
E57001 v_dailer\dialer\dispatcher\dunupinit.c
E57002 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\agent_time_util.cv_dialer\dialer\src\core\operator.cv_dailer\dialer\dispatcher\dunupinit.cv_dialer\dialer\src\swif\exec\opmon.c
E57003
E57004 v_dailer\dialer\dispatcher\dunupinit.c
E57005 v_dailer\dialer\dispatcher\dunupinit.c
E57006 v_dailer\dialer\dispatcher\dunupinit.c
E57007 v_dailer\dialer\dispatcher\dunupinit.c
E57008 v_dailer\dialer\dispatcher\dunupinit.cv_dailer\dialer\dispatcher\mp_change_groupid.cv_dailer\dialer\dispatcher\pa_acd_perm.cv_dailer\dialer\dispatcher\snd_agt_msg.cv_dailer\dialer\dispatcher\gateway.c
E57009 v_dailer\dialer\dispatcher\ap_aborting.cv_dailer\dialer\dispatcher\ap_acquiring.cv_dailer\dialer\dispatcher\ap_prereleasing.cv_dailer\dialer\dispatcher\ap_releasing.cv_dailer\dialer\dispatcher\dunupinit.cv_dailer\dialer\dispatcher\mp_change_groupid.cv_dailer\dialer\dispatcher\mp_job_set.cv_dailer\dialer\dispatcher\pa_acd_perm.cv_dailer\dialer\dispatcher\snd_agt_msg.cv_dailer\dialer\dispatcher\dunup.cv_dailer\dialer\dispatcher\gateway.c
E57010 v_dailer\dialer\dispatcher\dunupinit.cv_dailer\dialer\dispatcher\mp_login.c
E57011 v_dailer\dialer\dispatcher\dunup.c
E57012 v_dailer\dialer\dispatcher\dunup.c
E57013 v_dailer\dialer\dispatcher\dunup.c
Maintenance and Troubleshooting Guide March 2008 245
E57014 v_dailer\dialer\dispatcher\action_processor.c
E57015 v_dailer\dialer\dispatcher\du_format.cv_dailer\dialer\dispatcher\mp_genrel_query.cv_dailer\dialer\dispatcher\mp_op_headset_state.cv_dailer\dialer\dispatcher\mp_op_link_failure.cv_dailer\dialer\dispatcher\mp_response.c
E57016 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\agent_time_util.cv_dialer\dialer\src\core\operator.cv_dailer\dialer\dispatcher\dunupinit.cv_dailer\dialer\dispatcher\genrel_util.cv_dailer\dialer\dispatcher\mp_acquire_op.cv_dailer\dialer\dispatcher\mp_call_connect.cv_dailer\dialer\dispatcher\mp_login.cv_dialer\dialer\src\swif\exec\opmon.c
E57017 v_dailer\dialer\dispatcher\dunuputil.c
E57018 v_dailer\dialer\dispatcher\event_processor.cv_dailer\dialer\dispatcher\mp_call_event.c
E57019 v_dailer\dialer\dispatcher\gateway.cv_dialer\dialer\src\swif\exec\ServMonMsg.cpp
E57020 v_dailer\dialer\dispatcher\mp_acquire_op.c
E57021 v_dailer\dialer\dispatcher\mp_acquire_op.c
246 Maintenance and Troubleshooting Guide March 2008
E57022 v_dailer\dialer\dispatcher\mp_call_connect.cv_dailer\dialer\dispatcher\mp_call_event.cv_dailer\dialer\dispatcher\mp_change_groupid.cv_dailer\dialer\dispatcher\mp_create_call.cv_dailer\dialer\dispatcher\mp_domain_action.cv_dailer\dialer\dispatcher\mp_job_set.cv_dailer\dialer\dispatcher\mp_login.cv_dailer\dialer\dispatcher\mp_logout.cv_dailer\dialer\dispatcher\mp_trunk_release.cv_dailer\dialer\dispatcher\mp_user_action.c
E57023
E57024 v_dailer\dialer\dispatcher\mp_call_made.c
E57025 v_dailer\dialer\dispatcher\mp_response.c
E57026 v_dailer\dialer\dispatcher\mp_call_reject.cv_dailer\dialer\dispatcher\mp_job_set.c
E57027 v_dailer\dialer\dispatcher\mp_create_call.c
E57028 v_dailer\dialer\dispatcher\mp_domain_action.cv_dailer\dialer\dispatcher\mp_user_action.c
E57029 v_dailer\dialer\dispatcher\mp_job_set.c
E57030 v_dailer\dialer\dispatcher\mp_login.c
E57031 v_dailer\dialer\dispatcher\mp_response.c
E57032 v_dailer\dialer\dispatcher\mp_response.c
E57033 v_dailer\dialer\dispatcher\mp_response.c
E57034 v_dialer\dialer\src\core\agent_misc_util.cv_dailer\dialer\dispatcher\mp_timeout.c
E57035 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\agent_time_util.cv_dailer\dialer\dispatcher\mp_timeout.c
Maintenance and Troubleshooting Guide March 2008 247
E57036 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\agent_time_util.cv_dailer\dialer\dispatcher\mp_timeout.c
E57037
E57038 v_dailer\dialer\dispatcher\mp_login.c
E57039 v_dailer\dialer\dispatcher\mp_call_connect.c
E57040 v_dailer\dialer\dispatcher\mp_call_made.c
E57041 v_dailer\dialer\dispatcher\mp_release.c
E57042 v_dailer\dialer\dispatcher\mp_login.c
E57043 v_dailer\dialer\dispatcher\mp_user_action.c
E57044 v_dailer\dialer\dispatcher\dunupinit.c
E58002 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\reports\history\datamgr_init.cppv_dialer\dialer\src\swif\exec\ServMonMsg.cppv_dialer\dialer\services\srcEventServer.cppv_dialer\dialer\src\swif\exec\opmon.cv_dialer\dialer\src\core\porter.c
E59500 v_dialer\dialer\src\core\jobctrl.c
E59501 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
E59502
E59503 v_dialer\dialer\src\core\jobctrl.c
E59505 v_dialer\dialer\src\core\jobctrl.c
E59506 v_dialer\dialer\src\core\jobctrl.c
E59507 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
248 Maintenance and Troubleshooting Guide March 2008
E59508 v_dialer\dialer\src\core\jobctrl.c
E59508 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E59509 v_dialer\dialer\src\core\jobctrl.c
E59510 v_dialer\dialer\src\core\jobctrl.c
E59511 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E59512 v_dialer\dialer\src\core\jobctrl.c
E59513 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E59514 v_dialer\dialer\src\core\jobctrl.c
E59516 v_dialer\dialer\src\core\jobctrl.c
E59517 v_dialer\dialer\src\core\jobctrl.c
E59518 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E59519 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\jobctrl.c
E59520 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E59521 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E59522 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E59527 v_dialer\dialer\src\core\jobctrl.c
E59528 v_dialer\dialer\src\core\jobctrl.c
E59530 v_dialer\dialer\src\core\jobctrl.c
E59531
E59533 v_dialer\dialer\src\core\jobctrl.c
E59534 v_dialer\dialer\src\core\jobctrl.c
Maintenance and Troubleshooting Guide March 2008 249
E59535 v_dialer\dialer\src\core\jobctrl.c
E59539 v_dialer\dialer\src\core\jobctrl.c
E59540 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
E59541 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
E59542 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
E59596 v_dialer\dialer\src\core\jobctrl.c
E59597 v_dialer\dialer\src\core\jobctrl.c
E59598 v_dialer\dialer\src\core\jobctrl.c
E59599 v_dialer\dialer\src\core\jobctrl.c
E59600 v_dialer\dialer\src\core\jobctrl.c
E61000 midtier\unixdev\CmdCtrl\src\DialerCfgClient.cpp
250 Maintenance and Troubleshooting Guide March 2008
E61001 midtier\unixdev\RealTimeDataServer\src\RTRMmain.cppmidtier\unixdevv_dialer\dialer\services\src\Init.cppv_dialer\dialer\services\srcEventServiceIF_i.cppmidtier\unixdev\CmdCtrl\src\DialerCfgClient.cppmidtier\unixdev\Logger\src\LoggingServer_i.cppmidtier\unixdev\ServiceActivation\src\ServiceActivatingIFImpl.cxxmidtier\unixdev\ServiceMonitor\src\ServiceMonitor_ServiceMonitoringIFImpl.cxxmidtier\unixdevv_dialer\dialer\services\src\DialerEventServerIF_i.cppmidtier\unixdevv_dialer\dialer\services\src\EventClient.cppmidtier\unixdevv_dialer\dialer\services\src\EventServer.cppmidtier\unixdevv_dialer\dialer\services\src\EventServiceIF_i.cppmidtier\unixdev\SysHealth\src\SystemHealthEntryImpl.cppv_dialer\dialer\DialerServiceActivation\src\DSAServiceIFImpl.cxx\DSHdialerSystemHealthEntryImpl.cppv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitoringIFImpl.cxx
E61002 midtier\unixdevv_dialer\dialer\services\src\EventServiceIF_i.cppv_dialer\dialer\services\srcEventServiceIF_i.cpp
Maintenance and Troubleshooting Guide March 2008 251
E61003 midtier\unixdev\CmdCtrl\src\DialerCfgClient.cppmidtier\unixdev\RealTimeDataServer\src\RTRMmain.cppmidtier\unixdevv_dialer\dialer\services\src\EventClient.cppmidtier\unixdevv_dialer\dialer\services\src\EventServer.cppmidtier\unixdevv_dialer\dialer\services\src\EventServiceIF_i.cppmidtier\unixdevv_dialer\dialer\services\src\Init.cppv_dialer\dialer\services\srcEventServiceIF_i.cpp
E61004 midtier\unixdev\services\src\Init.cpp
E61005 midtier\unixdev\services\src\Init.cpp
E61006 midtier\unixdev\services\src\Init.cpp
E61007 midtier\unixdev\services\src\EventServer.cpp
E61008 midtier\unixdev\services\src\ShmDataReader.cpp
E61009
E61040 midtier\unixdev\services\src\Init.cpp
E61041 midtier\unixdev\services\src\Init.cpp
E61042 midtier\unixdev\services\src\Init.cpp
E61043 midtier\unixdev\services\src\Init.cpp
E62000 v_dialer\dialer\DialerCmdCtrl\src\CmdCtrl_Table_i.cpp
E62001 dialer\Cmdctrl\CCompcodeTableSO.cppv_dialer\dialer\DialerCmdCtrl\CConfigTableSO.cpp
E62002 v_dialer\dialer\DialerCmdCtrl\AgentLib.cppv_dialer\dialer\DialerCmdCtrl\CTableSO.cppv_dialer\dialer\DialerCmdCtrl\FileTable.cpp
252 Maintenance and Troubleshooting Guide March 2008
E62003 v_dialer\dialer\DialerCmdCtrl\AgentLib.cpp
E62004 v_dialer\dialer\DialerCmdCtrl\AgentLib.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cppv_dialer\dialer\DialerCmdCtrl\FileTable.cppv_dialer\dialer\DialerCmdCtrl\SelData.cppv_dialer\dialer\DialerCmdCtrl\StratData.cpp
E62005 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\CompcodeTable.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cppv_dialer\dialer\DialerCmdCtrl\RecordLock_utest.cpp
E62006 v_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
E62007 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
E62008 v_dialer\dialer\DialerCmdCtrl\CompcodeData.cppv_dialer\dialer\DialerCmdCtrl\JobData.cppv_dialer\dialer\DialerCmdCtrl\PromptData.cppv_dialer\dialer\DialerCmdCtrl\SelData.cppv_dialer\dialer\DialerCmdCtrl\StratData.cpp
E62009 v_dialer\dialer\DialerCmdCtrl\CompcodeData.cpp
Maintenance and Troubleshooting Guide March 2008 253
E62010 v_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallListTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CConfigTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\CLineGrpTableSO.cppv_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cppv_dialer\dialer\DialerCmdCtrl\CTelephnySpt.cpp
E62011 v_dialer\dialer\DialerCmdCtrl\CConfigTableSO.cppv_dialer\dialer\DialerCmdCtrl\CLineGrpTableSO.cppv_dialer\dialer\DialerCmdCtrl\CodeDescTable.cppv_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cppv_dialer\dialer\DialerCmdCtrl\CTelephnySpt.cppv_dialer\dialer\DialerCmdCtrl\TelephnyTable.cppv_dialer\dialer\DialerCmdCtrl\VoicemsgCfgTable.cpp
E62012 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
E62013 v_dialer\dialer\DialerCmdCtrl\AgentLib.cppv_dialer\dialer\DialerCmdCtrl\CCompcodeTableSO.cppv_dialer\dialer\DialerCmdCtrl\FileTable.cpp
E62014 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
E62015 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
254 Maintenance and Troubleshooting Guide March 2008
E62016 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
E62017 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
E62018 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
E62019 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
E62020 v_dialer\dialer\DialerCmdCtrl\CrudulMethods.cppv_dialer\dialer\DialerCmdCtrl_Agent_i.cppv_dialer\dialer\DialerCmdCtrl_CallSelect_i.cppv_dialer\dialer\DialerCmdCtrlv_dialer\dialer\DialerCmdCtrl_CallStrategy_i.cppv_dialer\dialer\DialerCmdCtrlv_dialer\dialer\DialerCmdCtrl_Compcode_i.cppv_dialer\dialer\DialerCmdCtrl_Config_i.cppv_dialer\dialer\DialerCmdCtrl_DialerControl_i.cppv_dialer\dialer\DialerCmdCtrl_Domain_i.cppv_dialer\dialer\DialerCmdCtrl_Headset_i.cppv_dialer\dialer\DialerCmdCtrl_Ivr_i.cppv_dialer\dialer\DialerCmdCtrl_Job_i.cppv_dialer\dialer\DialerCmdCtrl_SelectIndex_i.cppv_dialer\dialer\DialerCmdCtrl_TableFactory_i.cpp
E62021 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
E62022 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Maintenance and Troubleshooting Guide March 2008 255
E62023 v_dialer\dialer\DialerCmdCtrl_TableFactory_i.cpp
E62024 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\CompcodeTable.cppv_dialer\dialer\DialerCmdCtrl\CTelephnySpt.cppv_dialer\dialer\DialerCmdCtrl\MasterCfgTable.cppv_dialer\dialer\DialerCmdCtrl\TelephnyTable.cppv_dialer\dialer\DialerCmdCtrl\VoicemsgCfgTable.cpp
E62025 v_dialer\library\libutil++\src\account_r.
E62026 v_dialer\library\libutil++\src\account_r.
256 Maintenance and Troubleshooting Guide March 2008
E62027 v_dialer\dialer\DialerCmdCtrl\CrudulMethods.cppv_dialer\dialer\DialerCmdCtrl_Agent_i.cppv_dialer\dialer\DialerCmdCtrl_Blend_i.cppv_dialer\dialer\DialerCmdCtrl_CallSelect_i.cppv_dialer\dialer\DialerCmdCtrl_CallStrategy_i.cppv_dialer\dialer\DialerCmdCtrl_Compcode_i.cppv_dialer\dialer\DialerCmdCtrl_Config_i.cppv_dialer\dialer\DialerCmdCtrl_DialerControl_i.cppv_dialer\dialer\DialerCmdCtrl_Domain_i.cppv_dialer\dialer\DialerCmdCtrl_Headset_i.cppv_dialer\dialer\DialerCmdCtrl_Ivr_i.cppv_dialer\dialer\DialerCmdCtrl_Job_i.cppv_dialer\dialer\DialerCmdCtrl_SelectIndex_i.cppv_dialer\dialer\DialerCmdCtrl_TableFactory_i.cpp
E62028
E62029 v_dialer\dialer\DialerCmdCtrl\MsgQueue.cpp
E62030 v_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cpp
E62031 v_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cpp
E62032 v_dialer\dialer\DialerCmdCtrl\AgentShmLib_utest.cppv_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCompcodeTableSO.cpp
E62033 v_dialer\dialer\DialerCmdCtrl\ShmAccess.cpp
E62034
E62035 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cpp
Maintenance and Troubleshooting Guide March 2008 257
E62036 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E62037 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cpp
E62038 v_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cpp
E62039 v_dialer\dialer\DialerCmdCtrl\AgentShmLib_utest.cppv_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cpp
E62040 v_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
E62041 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E62042 v_dialer\library\libcallsel\src\cllcallsel.cpp
E62043 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cpp
E62044 v_dialer\library\libcallsel\src\cllcallsel.cpp
E62045 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E62046 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E62047 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E62048 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E62049 dialerclient\Redwood\VBApps\Editor\MDIForm1.frmv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E62050 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppdialerclient\Redwood\VBApps\Editor\MDIForm1.frm
258 Maintenance and Troubleshooting Guide March 2008
E62051 dialerclient\Redwood\VBApps\Editor\MDIForm1.frmdialerclient\Redwood\VBApps\Editor\Modules\General.bas
E62052 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cppv_dialer\dialer\DialerCmdCtrl\CompcodeTable.cpp
E62053 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\CompcodeTable.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
E62054 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E62055 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E62056
E62057 v_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cpp
E62058 v_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cpp
E62059 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cpp
E62060 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
E62061 v_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cpp
Maintenance and Troubleshooting Guide March 2008 259
E62062 v_dialer\library\libcallsel\src\CallStgyLib.cpp
E62070 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptSyntaxErrorRe.cpp
E62071 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptSyntaxErrorRe.cpp
E62072 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62073 v_dialer\dialer\DialerCmdCtrl\CTelephnySpt.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62074 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62075 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62076 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62077 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62078 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62079 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
260 Maintenance and Troubleshooting Guide March 2008
E62080 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62081 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62082 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62083 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XmlBase.cpp
E62084 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XmlBase.cpp
E62085 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XmlBase.cpp
E62086 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XmlBase.cpp
E62087 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptTransform.cpp
E62088 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptTransform.cpp
E62089 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptTransform.cpp
Maintenance and Troubleshooting Guide March 2008 261
E62090 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XmlDomErrorHandler.cpp
E62091 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XsltBase.cpp
E62092 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62093 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62094 v_dialer\dialer\DialerCmdCtrl\SptParserApi.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62095 v_dialer\dialer\DialerCmdCtrl\CTelephnySpt.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62096 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
E62097 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
E62098 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
E62099 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
E62100 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
E62101 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
E62102 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
262 Maintenance and Troubleshooting Guide March 2008
E62103 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
E62104 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
E62105 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cpp
E62106 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cpp
E62107, E62108
E62109 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cpp
E62110-E62111
E62112 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cppv_dialer\dialer\DialerCmdCtrl\RecordLock_utest.cpp
E62113 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
E62114
E63000 midtier\unixdev\CmdCtrl\src\CCTable.cppmidtier\unixdev\CmdCtrl\src\CmdCtrlImpl.cpp
E66666 (not in list)
v_dialer\dialer\src\core\agent.c
Maintenance and Troubleshooting Guide March 2008 263
E70000 v_dialer\dialer\src\core\agent_io_util.c Incorrect number of arguments
E70001 v_dialer\dialer\src\core\agent_io_util.c Incorrect message type
E70002 v_dialer\dialer\src\core\agent_time_util.c Timed out waiting for <message>
E70003 v_dialer\dialer\src\core\agent_misc_util.c Incorrect job type
E70004 v_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\agent_sys_util.c
Command failed
E70005 v_dialer\dialer\src\core\agent_io_util.c Incoming command exceeded maximum buffer size
E70006 v_dialer\dialer\src\core\agent.c Must select unit
E70007 v_dialer\dialer\src\core\agent_tdss_util.c Cannot transfer inbound call
E70008 v_dialer\dialer\src\core\agent_tdss_util.c Must specify transfer job
E70009 v_dialer\dialer\src\core\agent_tdss_util.c Unable to send message to porter
E70010 v_dialer\dialer\src\core\agent_tdss_util.c Conference in progress
E70011 v_dialer\dialer\src\core\agent_hs_util.c Call blending is not available
E70012 v_dialer\dialer\src\core\agent_misc_util.c Password has expired
E70013 v_dialer\dialer\src\core\agent_misc_util.c Password can not be changed, change limit not expired
E70014
E70015 v_dialer\dialer\src\core\agent_misc_util.c Unable to become root privilege for setting password
E70016 v_dialer\dialer\src\core\agent_misc_util.c Original password is invalid
E70017 v_dialer\dialer\src\core\agent_misc_util.c New password entered is invalid
E70018 v_dialer\dialer\src\core\agent.c IVR_SCRIPT is blank in job <name>
E70019 v_dialer\dialer\src\core\agent.c Job <name> is not valid for IVR agents
E72000 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
264 Maintenance and Troubleshooting Guide March 2008
E72010 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
E72030 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
E72040 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
E72050 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
E72051 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
E72052 v_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
E72060 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DSMEvent.cxxv_dialer\dialer\DialerServiceMonitor\src\EventReceiver.cxxv_dialer\dialer\DialerServiceMonitor\src\SoeEvent.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
E72070 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
Maintenance and Troubleshooting Guide March 2008 265
E72080 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
E72090 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
E72100 v_dialer\dialer\DialerServiceActivation\src\DSA.cxx
E72110
E72120 v_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxx
E72130 v_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxx
E72140 v_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxx
E72150 v_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxx
E72160 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxxv_dialer\dialer\DialerServiceActivation\src\DSAServiceIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\EventReceiver.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitoringIFImpl.cxx
E72170 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
E72180 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
266 Maintenance and Troubleshooting Guide March 2008
E72190 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
E72200 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
E72201 (not in list)
v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
E72210 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
E72220 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
E72230 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
E72240 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
E72250 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
E72260 v_dialer\dialer\DialerServiceActivation\src\DSAServiceIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitoringIFImpl.cxx
E72270 v_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxx
E72280 v_dialer\dialer\DialerServiceMonitor\src\\DialerServiceMonitor.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
E72290 v_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
E72300 v_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
Maintenance and Troubleshooting Guide March 2008 267
E72310 v_dialer\dialer\DialerServiceMonitor\src\EventReceiver.cxx
E72320(not in list)
v_dialer\dialer\DialerServiceMonitor\src\EventReceiver.cxxv_dialer\dialer\DialerServiceMonitor\src\SoeEvent.cxx
268 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 269
Error message text and source file table
The table in this section includes the error messafge number, text, and source files.
Error Numbers Found in these files Error message
E00000 v_dialer\dialer\src\core\job_strter.c
E00500 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\donotcall.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\enforcer\src\enforcer.cppv_dialer\dialer\src\swif\exec\swid_main.cv_dialer\dialer\src\core\nuisance.cv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\core\recall_rmp.cv_dialer\dialer\src\dbmaint\record_ed.cv_dialer\dialer\src\core\switcher.cv_dialer\dialer\src\dbconst\writetape.c
%s - Caught signal %d (%s)
270 Maintenance and Troubleshooting Guide March 2008
E00501 v_dialer\admin\src\signalit.cv_dialer\admin\src\termprocess.cv_dialer\dialer\src\utility\agentcheck.cv_dialer\dialer\src\utility\agentcount.cv_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\beeper.cv_dialer\dialer\src\callsel\callconn.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\utility\list_status.cv_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxxv_dialer\dialer\src\reports\rpt_mgr\pds_view.cv_dialer\dialer\src\reports\rpt_mgr\rpt_view.c
%s - Caught signal %d (%s) and terminated
Maintenance and Troubleshooting Guide March 2008 271
E00502 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\admin\src\createop.cv_dialer\dialer\src\callsel\cseldmp.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\callsel\call_stgy.cv_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\jobscrn.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\port_hndle.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\reports\reportgen\reportfmt.cv_dialer\dialer\src\swif\exec\swid_main.cv_dialer\dialer\src\lstextract\ext_list.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\ivr\src\ivr_config.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\markrec\latemrk.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\editor\master_ed.cv_dialer\dialer\DialerCmdCtrl\AgentLib.cppv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\postupdate\postupdate.cv_dialer\dialer\src\dbmaint\record_ed.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\utility\ziptoarea.cv_dialer\dialer\src\core\screen.c
%s - Failed to allocate Memory
272 Maintenance and Troubleshooting Guide March 2008
E00503 v_dialer\dialer\src\callsel\callconn.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\dbconst\selection.cv_dialer\dialer\src\reports\history\hist_rpt.cv_dialer\dialer\src\lstextract\ext_data.cv_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\markrec\set_field.cv_dialer\dialer\src\menu\submenu.cv_dialer\dialer\src\dbconst\writetape.c
%s - Pattern error: %s
E00504 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\swif\exec\swid_main.cv_dialer\dialer\src\utility\pds_pg.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
%s - Bad argument
E00505 v_dialer\dialer\src\markrec\latelst.c %s - Invalid time format
E00506 v_dialer\dialer\src\markrec\latelst.c %s - Invalid date format
E00507 v_dialer\dialer\src\listserver\listserver.cv_dialer\dialer\DialerCmdCtrl\MasterCfgTable.cppv_dialer\dialer\src\utility\port_start.c
%s - Failed to retrieve environmental variable %s
E00508 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\listserver\listserver.cv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\reports\history\vrecords.c
%s - Entry %s missing/invalid in master.cfg file
Maintenance and Troubleshooting Guide March 2008 273
E00509 v_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\preprocess\msgmap.cv_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\src\postupdate\postupdate.cv_dialer\dialer\src\dbmaint\rec_update.cv_dialer\dialer\src\scrnbld\scrnbld.cv_dialer\dialer\src\markrec\set_field.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\reports\history\vrecords.c
%s - Entry %s missing/invalid in %s file
E00510 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\dnc_mark.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbmaint\record_ed.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\dbconst\writetape.c
%s - Entry %s is incompatible in length
274 Maintenance and Troubleshooting Guide March 2008
E00511 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\dnc_mark.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\dbmaint\redit_scrn.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbmaint\record_ed.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\dbconst\writetape.c
%s - Failed to process file %s
E00512 v_dialer\dialer\DialerCmdCtrl\DccsVmValidator.cpp
%s - File name %s too long
E00513 v_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\reports\reportgen\reportfmt.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\utility\pds_pg.cv_dialer\dialer\src\scrnbld\scrnbld.c
%s - Invalid file name %s
E00514 dialer_library\libdsi\src\dispkey.cdialer_library\libdsi\src\help.cdialer_library\libui\src\vlui.c
%s - File name %s already exist
Maintenance and Troubleshooting Guide March 2008 275
E00515 v_dialer\admin\src\addgroup.cv_dialer\dialer\src\utility\adump.cv_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\callsel\callconn.cv_dialer\dialer\src\core\caller.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\editor\config_ed.cv_dialer\admin\src\createop.cv_dialer\dialer\src\callsel\cseldmp.cv_dialer\dialer\src\core\agent_io_util.cv_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\chainhandler.cv_dialer\dialer\src\core\dnc_mark.cv_dialer\dialer\src\core\install_ext.cv_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\screen.c8v_dialer\dialer\src\core\transfer.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\pcextract\fileops.cv_dialer\dialer\src\custom\readwrt.cv_dialer\dialer\src\utility\portcorr.cv_dialer\dialer\src\utility\test_help.cv_dialer\library\libdsi\src\rpt_server.cv_dialer\dialer\src\swif\exec\opmoncfg.cv_dialer\dialer\src\utility\edump.cv_dialer\dialer\src\utility\fdictdump.cv_dialer\dialer\src\lettergen\formlet.cv_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\preprocess\hsh_dump.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\imon\internetmon.cv_dialer\ivr\src\ivr_config.cv_dialer\dialer\src\utility\jobkeys.c
%s - Failed to open file %s
276 Maintenance and Troubleshooting Guide March 2008
E00515 v_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\markrec\latemrk.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\lettergen\mail_label.cv_dialer\dialer\src\editor\master_ed.cv_dialer\dialer\src\menu\menu.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\core\msg_loader.cv_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxxv_dialer\dialer\enforcer\src\enlicense.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptValidatingProcessor_utest.cppv_dialer\dialer\src\core\nuisance.cv_dialer\dialer\src\reports\history\op_hist.cv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\postupdate\postupdate.cv_dialer\dialer\src\utility\print_pif.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbmaint\rec_update.cv_dialer\dialer\src\dbmaint\record_ed.cv_dialer\dialer\src\reports\rpt_mgr\rpt_view.cv_dialer\dialer\src\utility\scan.cv_dialer\dialer\src\scrnbld\scrnbld.cv_dialer\dialer\src\markrec\set_field.cv_dialer\dialer\src\menu\submenu.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\reports\history\vrecords.cv_dialer\dialer\src\dbconst\writetape.cv_dialer\dialer\src\utility\ziptoarea.c
Maintenance and Troubleshooting Guide March 2008 277
E00516 v_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxx
%s - Failed to close file %s
E00517 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\utility\ziptoarea.c
%s - Failed to create file %s
E00518 v_dialer\dialer\src\callsel\callconn.cv_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\agent_sys_util.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\dbmaint\redit_scrn.cv_dialer\dialer\src\pcextract\fileops.cv_dialer\dialer\src\reports\history\op_hist.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cppv_dialer\dialer\src\reports\history\op_hist.cv_dialer\dialer\src\dbconst\readtape.c
%s - Failed to read from file %s
E00519 v_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\dbconst\writetape.c
%s - Failed to write to file %s
E00520 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\reports\history\vrecords.c
%s - Failed to lock file %s
E00521 v_dialer\library\libdsi\src\getnum.c %s - Failed to unlock file %s
E00522 v_dialer\dialer\src\utility\enq_pty.cv_dialer\dialer\Cmdctrl\HeadsetLib.cppv_dialer\dialer\Cmdctrl\ShmAccess.cpp
%s - Failed to attach to shm, err=%d, id=%d
278 Maintenance and Troubleshooting Guide March 2008
E00523 v_dialer\library\libdsi\src\conn_queue.c %s - Failed to detach from shm, err=%d, id=%d
E00524 v_dialer\library\libdsi\src\conn_queue.c %s - Failed to remove shm, err=%d, id=%d
E00525 v_dialer\library\libdsi\src\mqueue.c %s - Failed to get msgq, err=%d, id=%d
E00526 v_dialer\library\libdsi\src\mqueue.c %s - Failed to send msg, err=%d, id=%d
E00527 v_dialer\library\libdsi\src\mqueue.c %s - Failed to recv msg, err=%d, id=%d
E00528 v_dialer\library\libdsi\src\mqueue.c %s - Failed to remove msgq, err=%d, id=%d
E00529 v_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\dbmaint\rec_update.cv_dialer\dialer\src\swif\exec\swid_main.c
%s - Failed to invoke function %s, err=%d
Maintenance and Troubleshooting Guide March 2008 279
E00530 v_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\core\dnc_mark.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\dbmaint\redit_scrn.cv_dialer\dialer\src\reports\reportgen\reportinit.cv_dialer\dialer\src\lstextract\ext_data.cv_dialer\dialer\src\lstextract\ext_list.cv_dialer\dialer\src\utility\fdictdump.cv_dialer\dialer\src\lettergen\formlet.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\lettergen\mail_label.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.cv_dialer\dialer\src\dbconst\writetape.cv_dialer\dialer\src\utility\ziptoarea.c
%s - Failed to open calling list %s
280 Maintenance and Troubleshooting Guide March 2008
E00531 v_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\core\dnc_mark.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\dbmaint\redit_scrn.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\postupdate\postupdate.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.cv_dialer\dialer\src\dbconst\writetape.cv_dialer\dialer\src\utility\ziptoarea.c
%s - Failed to read calling list definition %s
E00532 v_dialer\dialer\src\markrec\chkentdt.cv_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\de_reject.cv_dialer\dialer\src\callsel\call_scrn.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\lstextract\ext_data.cv_dialer\dialer\src\preprocess\ij_merge.cv_dialer\dialer\src\markrec\latelst.cv_dialer\dialer\src\markrec\latemrk.cv_dialer\dialer\src\preprocess\listdist.cv_dialer\dialer\src\lettergen\mail_label.cv_dialer\dialer\src\preprocess\setzones.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.cv_dialer\dialer\src\utility\ziptoarea.c
Field %s not defined in calling list %s
E00533 v_dialer\dialer\src\preprocess\listdist.c Field %s has incorrect length
Maintenance and Troubleshooting Guide March 2008 281
E00534 v_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\transfer.cv_dialer\dialer\src\dbconst\readtape.c
Not a calling list
E00535 v_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
%s - No space on file system
E00536 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\dbconst\moj_conv.c
%s - Failed to initialize keyboard
E00537 v_dialer\dialer\src\core\api_jobctl.c %s - Failed to initialize screen environment
E00538 v_dialer\dialer\src\core\api_jobctl.c %s - Failed to setup command keys
E00539 v_dialer\dialer\src\core\api_jobctl.c %s - Failed to create %s window
E00540 v_dialer\library\libui\src\vlui.c %s - Failed to create window pointer
E00541 v_dialer\dialer\src\core\screen.cv_dialer\dialer\src\dbmaint\redit_scrn.cv_dialer\dialer\src\utility\vfiles.c
%s - Failed to open keys file %s
E00542 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\dbconst\selection.c
%s - Field %s not defined in calling list %s
E00543 v_dialer\dialer\src\preprocess\clhash.c Field %s not defined in calling list %s (WARNING)
E00544 v_dialer\dialer\src\core\listops.c %s - Invalid Pattern '%s'
282 Maintenance and Troubleshooting Guide March 2008
E00545 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\chainhandler.cv_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\op_handler.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\core\port_hndle.cv_dialer\dialer\src\core\scripter.cv_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\src\core\recall_rmp.c
%s:fail to send %s to %s
E00546 v_dialer\library\libutil\src\checkdir.c Failed to create directory '%s' -- errno %d: %s
E00547 v_dialer\library\libutil\src\checkdir.c Non-directory '%s' in directory path '%s'
E00548 v_dialer\dialer\src\core\conn_mgr.cmidtier\unixdev\services\src\ShmDataReader.cpp
Missing/invalid entry for %s in file %s
E00549 v_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\listserver\listserver.cmidtier\unixdev\services\src\ShmDataReader.cpp
%s operation failed, file '%s' -- errno %d: %s
E00550 midtier\unixdev\services\src\ShmDataReader.cpp
Invalid entry for %s in file %s near '%s'
E00551 Assertion failed (expression false), aborting
E00552 v_dialer\dialer\src\listserver\listserver.cmidtier\unixdev\services\src\ShmDataReader.cpp
Failed to open directory %d
E00553 midtier\unixdev\services\src\ShmDataReader.cpp
File '%s' does not exist
E00554 v_dialer\dialer\src\listserver\listserver.c %s operation failed
Maintenance and Troubleshooting Guide March 2008 283
E00555 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.cv_dialer\dialer\src\\callsel\md_callsel.cmidtier\unixdev\services\src\EventServiceIF_i.cppv_dialer\dialer\DialerCmdCtrl\expr_utest.cpp
%s - %s
E00556 v_dialer\library\libutil++\src\ReadOnlyFile.cpp
File '%s' exists, but is not readable by user %s
E00557 v_dialer\library\libutil++\src\WriteOnlyFile.cpp
File '%s' exists, but is not writable by user %s
E10000 v_dialer\library\libdsi\src\asclist.c Exceeded max number (%d) of associate calling lists
E10001 v_dialer\library\libdsi\src\asclist.c Not an associate List
E10002 v_dialer\library\libdsi\src\asclist.c Not an associate select file: %s
E10003 v_dialer\library\libdsi\src\asclist.c Associate list name missing
E10004 v_dialer\library\libdsi\src\asclist.c Associate list name not in assoc.cfg file
E10005 v_dialer\library\libdsi\src\asclist.c %s - Creation time for %s is incorrect
E10006 v_dialer\library\libdsi\src\asclist.c Failed to change master clist: %s
E10007 v_dialer\library\libdsi\src\asclist.c Invalid logical connector at line %d
E10008 v_dialer\library\libdsi\src\asclist.c Missing field name or value at line %d
E10009 v_dialer\library\libdsi\src\asclist.c Group may not begin with no selection
E10010 v_dialer\library\libdsi\src\asclist.c Gap found between select fields within group
E10011 v_dialer\library\libdsi\src\asclist.c Field name not found at line %d
E10012 v_dialer\library\libdsi\src\asclist.cv_dialer\library\libdsi\src\script_lng.c
Pattern error at line %d: %s
E10013 v_dialer\library\libdsi\src\sock_stream.cpp
can't find service entry in /etc/services, errno=%d
E10014 v_dialer\library\libdsi\src\sock_stream.cpp
socket call failed, errno=%d
284 Maintenance and Troubleshooting Guide March 2008
E10015 v_dialer\library\libdsi\src\sock_stream.cpp
Unable to bind to local address, errno=%d
E10016 v_dialer\library\libdsi\src\sock_stream.cpp
Unable to setup listen on socket, errno=%d
E10017 v_dialer\library\libdsi\src\sock_stream.cpp
Unable to accept connection on socket, errno=%d
E10018 v_dialer\library\libdsi\src\sock_stream.cpp
Unable to connect to socket, errno=%d
E10019 v_dialer\library\libdsi\src\sock_stream.cpp
Unable to send data to socket %d, errno=%d
E10200 Unequal phone number field lengths in file %s
E10201 v_dialer\dialer\src\core\operator.c Invalid line selection
E10600 Failed to allocate memory
E10601 Invalid usage
E10602 v_dialer\dialer\src\core\job_strter.c Invalid job name
E10603 Failed to open edit file
E10604 No editable line in job file
E10605 Job file in use
E10606 Wrong job for verification editor
E10607 Required field not filled in
E10608 HUNTGRP format error
E10609 No HUNTGRP setting
E10610 No Inbound jobs allowed
E10611 Invalid number of reserve inbound line
E10612 Script label for answer missing/invalid
E10613 Failed to read inbound calling list
E10614 Failed to read associated calling list
E10615 Failed to read inbound screen file
Maintenance and Troubleshooting Guide March 2008 285
E10616 Failed to read inbound screen map
E10617 Failed to read multiple screen
E10618 Failed to read multiple screen map
E10619 Failed to read associated screen
E10620 Failed to read associated screen map
E10621 Failed to read outbound list
E10622 Failed to read outbound screen
E10623 Failed to read outbound map
E10624 Failed to read calling script
E10625 Failed to read key file
E10626 Failed to match associated field
E10627 Failed to process data transfer field
E10628 Failed to process associated selection
E10629 dialerclient\Redwood\VBAppsApps\Editor\MDIForm1.frmdialerclient\Redwood\VBApps\Editor\Classes\CJobs.cls
Selection list not available for use
E10630 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
STATUSFLAG field missing
E10631 CODE field missing
E10632 DTE field missing
E10633 TME field missing
E10634 Invalid start or stop time format
E10635 Invalid Hit Rate
E10636 Invalid Expert Calling Ratio
E10637 Invalid call completion code for Quota Value
E10638 Invalid quota value
286 Maintenance and Troubleshooting Guide March 2008
E10639 Invalid paired phone count/type
E10640 Invalid number of phone lines
E10641 Odd number of phone lines specified
E10642 Invalid phone type specified
E10643 Failed to initialize call strategy
E10644 Failed to read call strategy
E10645 Failed to verify call strategy
E10646 The specified job already running
E10648 Non-OP completion code specified for Quota setting
E10649 v_dialer\library\libdsi\src\job_cntrl.c Failed to find linked job file
E10650 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\library\libdsi\src\job_cntrl.c
Linking between virtual agent jobs and non-virtual jobs is not permitted
E10651 Sales verification job linking is not permitted
E10652 Job linking is not permitted
E10653 Invalid call completion code for TRANSTAT
E10654 dialer_client\VB\Editor\MDIForm1.frmdialer_client\VB\Editor\Classes\CJobs.cls
Selection list for job not found
E10655 dialer_client\VB\Editor\MDIForm1.frmdialer_client\VB\Editor\Classes\CJobs.cls
No verification selection list ready for job
E10656 dialer_client\VB\Editor\MDIForm1.frmdialer_client\VB\Editor\Classes\CJobs.cls
Selection list not created with this calling list
E10657 missing or invalid script label for call
E10658 Failed to open script file for IVR ID
E10659 IVR script name not specified; required if IVR ID specified
Maintenance and Troubleshooting Guide March 2008 287
E10660 dialerclient\Redwood\VBApps\Editor\MDIForm1.frm
Unable to find script name in script file for IVR ID
E10661 remote list use not permitted
E10662 Sales verification or managed dialing must have agents
E10663 Managed dialing is not permitted with sales verification or inbound
E10664 Virtual agents cannot select a specific unit to log in to
E10665 Sales verification is not permitted with unit work lists
E10666 Sales verification is not permitted with inbound
E10667 Selecting unit to log in to is not permitted with inbound-only job
E10800 Not an error
E10801 Not an open file descriptor
E10802 Failed to open file
E10803 Failed to close file
E10804 Failed to lock record
E10805 Failed to unlock record
E10806 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Failed to read file header
E10807 Failed to write file header
E10808 v_dialer\library\libutil++\src\KeywordValue.cppv_dialer\library\libutil++\src\mbcs_string.cppv_dialer\library\libutil++\src\SerializableErrorRev_dialer\dialer\src\core\porter.cppv_dialer\library\libutil++\src\SerializableKvErrorStorage.cpp
Failed to read record
E10809 Failed to write record
E10810 Failed to allocate CLSTAT table
288 Maintenance and Troubleshooting Guide March 2008
E10811 Failed to get record totals
E10812 Invalid operation code
E10813 Failed to read file dictionary
E10814 Failed to write file dictionary
E10815 Failed to create file
E10816 Failed to access file
E10817 Unconverted to year 2000
E10818 Unable to connect to listserver
E10819 XFD overflow (no XFD slots available)
E10820 Socket read error
E10821 Socket write error
E10822 Tag value incorrect - message alignment/framing error
E10823 File is open for reading only
E10824 File is open for writing only
E10850 v_dialer\library\libdsi\src\claccess.c Unable to open list '%s'
E10851 v_dialer\library\libdsi\src\claccess.c gethostbyname ('%s') failed
E10852 v_dialer\library\libdsi\src\claccess.c socket () failed
E10853 v_dialer\library\libdsi\src\claccess.c connect (conn_fd=%d) failed (is listserver running on host '%s'?)
E10854 v_dialer\library\libdsi\src\claccess.c _LcCreateXfd () failed
E10855 v_dialer\library\libdsi\src\claccess.c Write error -- wrote %d != expected %d
E10856 v_dialer\library\libdsi\src\claccess.c clstat (%d) failed
E10857 v_dialer\library\libdsi\src\claccess.c clrddict (%d) failed
E10858 v_dialer\library\libdsi\src\claccess.c getservbyname () failed -- using default LSERVPORT value (%d)
E10859 v_dialer\library\libdsi\src\cllaccess.c Bad file descriptor (%d)
Maintenance and Troubleshooting Guide March 2008 289
E10860 v_dialer\library\libdsi\src\claccess.c File corruption or record size mismatch detected in calling list %s; fd=%d
E10861 v_dialer\library\libdsi\src\cllaccess.c Failed to remove file %s
E10900 v_dialer\library\libdsi\src\conn_crit.c Error: Value: <%s> not in master.cfg
E11000 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Error: Recall attempt #%d (%s) can't be less than %d seconds
E11001 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Recall (%s) attempts can't exceed %d
E11002 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid recall code: %s
E11003 v_dialer\library\libutil++\src\FileMasterConfig.cppv_dialer\library\libdsi\src\cstgy.c
Failed to determine max number of phones
E11004 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Field value missing
E11005 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Gap found between selection criteria lines
E11006 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Extra ',' found
E11007 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid phone: %s
E11008 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid field name: %s
E11009 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid field value: %s
E11010 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid logical connector: %s
290 Maintenance and Troubleshooting Guide March 2008
E11011 v_dialer\library\libcallsel\src\CallStgyLib.cpp
Invalid time zone letter: %c
E11012 Invalid completion code: %s
E11013 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid ring count: %s. Must be 1 - %d
E11014 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Invalid call detection mode: %s
E11015 v_dialer\library\libcallsel\src\CallStgyLib.cppv_dialer\library\libdsi\src\cstgy.c
Error: Recall attempt #%d (%s) can't be less than %d minutes
E12000 v_dialer\library\libdsi\src\getnum.c File %s busy, try again later
E12100 Molocale - Unknown language name %s
E12101 v_dialer\library\libutil\src\molocale.c Molocale - Failed to set locale %s errno=%d
E12150 v_dialer\library\libdsi\src\pvrs_helper.c PVRS - Failed to initialize %s
E12151 Hash key field is not defined in %s
E12152 v_dialer\library\libdsi\src\pvrs_helper.cv_dialer\dialer\src\dbmaint\record_ed.c
No Previous Record
E12153 v_dialer\library\libdsi\src\pvrs_helper.cv_dialer\dialer\src\dbmaint\record_ed.c
No More Record
E12154 v_dialer\dialer\src\core\oper_pvrs.cv_dialer\dialer\src\dbmaint\record_ed.c
Failed to Load Record
E12155 v_dialer\dialer\src\core\oper_pvrs.c Record Currently In Use
E12156 v_dialer\library\libdsi\src\pvrs_helper.c No Record Found
E12200 Attempt to read hidfile without lock
E12201 Username %s exceeds %d characters in length
E12202 %s - Failed to lock file %s, errno(%d)
E12203 %s - Failed to unlock file %s, errno(%d)
Maintenance and Troubleshooting Guide March 2008 291
E12345 v_dialer\dialer\DialerCmdCtrl\DccGlobalFunc.cpp
E12400 v_dialer\library\libdsi\src\keystroke.cv_dialer\library\libutil\src\tsystem.c
tget returned errno %d raising signal %d
E12600 v_dialer\library\libdsi\src\map_dict.cv_dialer\library\libcallsel\src\map_dict2.cpp
Calling list %s not in shared memory
E12601 v_dialer\library\libdsi\src\map_dict.cv_dialer\library\libcallsel\src\map_dict2.cpp
Calling list field count not match
E12800 v_dialer\library\libdsi\src\map_scrn.c Failed to find screen %s
E13000 v_dialer\library\libdsi\src\mqueue.c IPC - Invalid input argument
E13001 v_dialer\library\libdsi\src\mqueue.c IPC - Invalid ipc entry
E13002 IPC - Invalid ipc name
E13003 v_dialer\library\libdsi\src\mqueue.c IPC - Invalid ipc number %d
E13004 v_dialer\library\libdsi\src\mqueue.c Warning: CFRM message truncated
E13005 v_dialer\library\libdsi\src\mqueue.c Timed out waiting for %s confirmation
E13006 v_dialer\library\libdsi\src\mqueue.c Response message too long!
E13007 v_dialer\library\libdsi\src\mqueue.c IPC - Failed to open opmon message queue
E13008 v_dialer\library\libdsi\src\mqueue.c %s - Failed on semaphore removal, err=%d key=%d
E13009 v_dialer\library\libdsi\src\mqueue.c %s - Failed on semaphore operation, err(%d) key = %d code = %d
E13010 v_dialer\library\libdsi\src\mqueue.c %s - Accessing bad semaphore
E13011 v_dialer\library\libdsi\src\mqueue.c %s - Failed to open semaphore, err(%d)
E13200 v_dialer\library\libdsi\src\opident.c Headset value (%s, %d) out of bound
E13201 v_dialer\library\libdsi\src\opident.c Headset %d not specified in %s file
E13400 Missing or invalid YES/NO field
292 Maintenance and Troubleshooting Guide March 2008
E13401 Missing or invalid length
E13402 v_dialer\library\libdsi\src\phonefmt.c Missing prefix
E13403 v_dialer\library\libdsi\src\phonefmt.c Missing line type
E13404 v_dialer\library\libdsi\src\phonefmt.c Missing or invalid num of chars to strip
E13405 Missing prefix
E13406 v_dialer\library\libdsi\src\phonefmt.c Missing suffix
E13407 v_dialer\library\libdsi\src\phonefmt.cv_dialer\library\libdsi\src\vlloccall.c
Duplicate ALL phone numbers specification
E13408 v_dialer\library\libdsi\src\phonefmt.c Phone number too long
E13409 v_dialer\library\libdsi\src\phonefmt.c Dial phone number too long
E13410 v_dialer\library\libdsi\src\phonefmt.c Missing std to dial phone number format
E13411 v_dialer\library\libdsi\src\phonefmt.c Invalid use of ALL phone numbers specification
E13412 v_dialer\library\libdsi\src\phonefmt.c Missing phone numbers
E13600 v_dialer\library\libdsi\src\rpt_server.c Report failed, system out of space
E13800 v_dialer\library\libdsi\src\swcfg_tbl.c Invalid Headset Number (%d, %s)
E13801 v_dialer\library\libdsi\src\swcfg_tbl.c Headset port no. %d out of range (1-%d)
E13802 v_dialer\library\libdsi\src\swcfg_tbl.c Normal trunk port no. %d out of range (1-%d)
E13803 v_dialer\library\libdsi\src\swcfg_tbl.c Invalid normal trunk equip no %d
E13804 Invalid normal trunk group no %d
E13805 v_dialer\library\libdsi\src\swcfg_tbl.c Invalid transfer trunk group no %d
E13806 Failed to determine switch type
E13807 v_dialer\library\libdsi\src\swcfg_tbl.c Failed to process line (%s)
E14100 Invalid timezone from GMT
Maintenance and Troubleshooting Guide March 2008 293
E14101 Invalid time format at line %d in file %s
E14200 v_dialer\library\libdsi\src\vlloccall.c Missing delay specification
E14201 v_dialer\library\libdsi\src\phonefmt.cv_dialer\library\libdsi\src\vlloccall.c
Missing or invalid low range
E14202 v_dialer\library\libdsi\src\phonefmt.cv_dialer\library\libdsi\src\vlloccall.c
Invalid range character
E14203 v_dialer\library\libdsi\src\phonefmt.cv_dialer\library\libdsi\src\vlloccall.c
Invalid high range
E14204 v_dialer\library\libdsi\src\vlloccall.c Invalid min delay
E14205 v_dialer\library\libdsi\src\vlloccall.c Missing completion code
E14206 v_dialer\library\libdsi\src\vlloccall.c Invalid completion code
E14207 v_dialer\library\libdsi\src\vlloccall.c Range does not come after previous range
E14208 v_dialer\library\libdsi\src\vlloccall.c Missing limit
E14209 v_dialer\library\libdsi\src\phonefmt.cv_dialer\library\libdsi\src\vlloccall.c
Missing or invalid YES/NO field
E14210 v_dialer\library\libdsi\src\vlloccall.c Missing time zone specification for country %d
E14211 v_dialer\library\libdsi\src\vlloccall.c Missing or invalid time zone designation
E14212 v_dialer\library\libdsi\src\vlloccall.c Missing reject phone number pattern
E14213 v_dialer\library\libdsi\src\vlloccall.c Invalid reject phone number pattern
E14214 v_dialer\library\libdsi\src\vllocmisc.cv_dialer\library\libdsi\src\vllocport.c
Duplicate country specified
E14215 v_dialer\library\libdsi\src\vllocmisc.cv_dialer\library\libdsi\src\vllocport.c
Invalid answer delay time
E14216 v_dialer\library\libdsi\src\vllocport.c Invalid DAA type
E14217 v_dialer\library\libdsi\src\vllocport.c Invalid VM2 locale code
E14218 v_dialer\library\libdsi\src\vllocport.c Invalid phone number length
E14219 v_dialer\library\libdsi\src\vllocport.c Rejected phone number (L%d)
294 Maintenance and Troubleshooting Guide March 2008
E14220 v_dialer\library\libdsi\src\vllocport.c Cannot find time zone for phone number
E14221 v_dialer\library\libdsi\src\vllocport.c Invalid offhook retry delay
E14222 v_dialer\library\libdsi\src\vllocport.c Invalid wait limit
E14400 Unknown select file %s
E14401 v_dialer\dialer\src\preprocess\ij_merge.cv_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
Unknown call completion code %s
E14402 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
No call completion codes selected
E14404 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
Missing field name or value at selection entry %d
E14405 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
Group may not begin with no selection
E14406 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
Gap found between select fields within group
E14407 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
Field name not found at selection entry %d
E14408 v_dialer\library\libcallsel\src\CallSelLib.cppv_dialer\library\libdsi\src\cselect.c
Pattern error at selection entry %d: %s
E14409 v_dialer\library\libdsi\src\conn_queue.c Unit Control - Invalid memory slot position
E14410 v_dialer\library\libdsi\src\conn_queue.c Unit Control - Failed to attach to data segment
E14800 v_dialer\library\libutil\src\tcap.c Termcap entry larger than buffer size
E14801 v_dialer\library\libutil\src\tcap.c Invalid termcap entry format
E14802 v_dialer\library\libutil\src\tcap.c 'tc' entries exceed maximum allowed
Maintenance and Troubleshooting Guide March 2008 295
E14900 v_dialer\library\libutil\src\terminal.c Terminal type %s not found in %s
E14901 v_dialer\library\libutil\src\terminal.c Default terminal type vt100 not found in %s
E15200 v_dialer\library\libui\src\vlui.c No summary information available
E15201 v_dialer\library\libui\src\vlui.c Invalid field type
E15202 v_dialer\library\libui\src\vlui.c Invalid value, Must be %s
E15203 v_dialer\library\libui\src\vlui.c Sorry, command not allowed inside editor
E15204 v_dialer\library\libui\src\vlui.c %s - Menubar '%s' already exists.
E15205 v_dialer\library\libui\src\vlui.c %s - Menubar '%s' not found.
E15400 v_dialer\library\libui\src\vlui.c %s:new_bsrch - Memory allocation (%d bytes) failed, loc %d
E15401 v_dialer\library\libdsi\src\bsrch.c %s:new_bsrch - Bad value in new_bsrch (cl_name=%s cl_fd=%d, cl_keyname=%s init_type=%c pgmname=%s log_type=%d log_file=%s)
E15402 v_dialer\library\libdsi\src\bsrch.c %s:new_bsrch - List recno %d locked-skipping;
E15403 v_dialer\library\libdsi\src\bsrch.c %s:new_bsrch - List recno %d locked-aborting;
E15404 v_dialer\library\libdsi\src\bsrch.c %s:new_bsrch - Bad calling list record parameter(s): keylen=%d reclen=%d nrecs=%d
E15420 v_dialer\library\libdsi\src\bsrch.c %s:new_hsrch - Memory allocation (%d bytes) failed, loc %d
E15421 v_dialer\library\libdsi\src\bsrch.c %s:new_hsrch - Unable to open hash file for %s
E15422 v_dialer\library\libdsi\src\bsrch.c %s:new_hsrch - Missing key_field entry in hash file %s
E15424 %s:new_hsrch - Bad calling list record parameter(s): keylen=%d reclen=%d
296 Maintenance and Troubleshooting Guide March 2008
E16000 v_dialer\library\libutil\src\labfdctry.c Missing or invalid country code
E16100 v_dialer\library\libutil\src\labfile.c Line too long
E16101 v_dialer\library\libutil\src\labfile.c Missing label
E16102 v_dialer\library\libutil\src\labfile.c Invalid label on line
E16400 v_dialer\library\libutil\src\preftree.c Range not properly nested
E16401 v_dialer\library\libutil\src\preftree.c Prefix falls on a range's border
E16402 v_dialer\library\libutil\src\preftree.c Range border falls on a prefix
E16403 v_dialer\library\libutil\src\preftree.c Range straddles previous range
E16404 v_dialer\library\libutil\src\preftree.c Prefix has the same value as a shorter prefix
E16405 v_dialer\library\libutil\src\preftree.c Same prefix is already specified
E16406 v_dialer\library\libutil\src\preftree.c Prefix has the same value as a longer prefix
E16407 v_dialer\library\libutil\src\preftree.c Missing prefix
E16408 v_dialer\library\libutil\src\preftree.c Invalid character in prefix
E16409 v_dialer\library\libutil\src\preftree.c Low range has fewer digits than high
E16410 v_dialer\library\libutil\src\preftree.c Range borders are out of order
E16411 v_dialer\library\libutil\src\preftree.c Bad argument in ptree
E16500 v_dialer\library\libutil\src\hash.c Hash_get (%x, %s, %d) failed due to too many probes
E16501 v_dialer\library\libutil\src\hash.c Requested size %d is too large -- Max hash table slots currently supported is %d
E16600 v_dialer\library\libutil\src\expr.c Pattern '%s': Expected numerical lval, found '%s'
E16601 v_dialer\library\libutil\src\expr.c Pattern '%s': Expected numerical rval, found '%s'
E16602 v_dialer\library\libutil\src\expr.c Pattern '%s': lval > rval (%g > %g)
E16603 v_dialer\library\libutil\src\expr.c Pattern '%s': Expected hyphen, list separator, or end of pattern; found '%c'
Maintenance and Troubleshooting Guide March 2008 297
E16604 v_dialer\library\libutil\src\expr.c Pattern '%s': Unexpected end of numerical comparison
E16605 v_dialer\library\libutil\src\expr.c Pattern '%s': Pattern too large
E16606 v_dialer\library\libutil\src\expr.c Pattern '%s': Bad or missing DATEFORM parameter in master.cfg
E16607 v_dialer\library\libutil\src\expr.c Pattern '%s': Bad format for date comparison
E16608 v_dialer\library\libutil\src\expr.c Pattern '%s': Bad format for time comparison
E16609 v_dialer\library\libutil\src\expr.c Pattern '%s': Bad format for relative date comparison
E16610 v_dialer\library\libutil\src\expr.c Pattern '%s': Undefined backslashed character '%c'
E16611 v_dialer\dialer\DialerCmdCtrl\expr_utest.cpp
Pattern '%s': Unknown pattern type '%c' specified
E16612 v_dialer\library\libutil\src\expr.c Pattern '%s': Failed to compile - use explicit pattern syntax for more details
E16620 v_dialer\library\libutil\src\expr.c Unable to compare - previous pattern failed compilation - '%s'
E16621 v_dialer\library\libutil\src\expr.c No compiled pattern to compare against for string '%s'
E16800 v_dialer\library\libutil\src\undefined.c Undefined func call: %s
E16900 v_dialer\library\libutil\src\exec_prog.c EXECPROG:Unexpected exit from waitpid() returning -1:errno=%d:pid=%d,child=%d
E16901 v_dialer\library\libutil\src\exec_prog.c EXECPROG:not returning from child process:pid=%d,child=%d
E16902 v_dialer\library\libutil\src\exec_prog.c EXECPROG:Exit(%d) wait(pid=%d)
E16903 v_dialer\library\libutil\src\exec_prog.c EXECPROG:Signal STOPPED wait(%d)
E16904 v_dialer\library\libutil\src\exec_prog.c EXECPROG:Sig_Exit:errno=%d:stat=0x%X:sig=%d:pid=%d,child=%d
E16905 v_dialer\library\libutil\src\exec_prog.c EXECPROG:Unexpected exit:errno=%d:stat_loc=0x%X:ret=%d:pid=%d,child=%d
298 Maintenance and Troubleshooting Guide March 2008
E16906 v_dialer\library\libutil\src\exec_prog.c EXECPROG:Killed Child(%d):%s:
E16907 v_dialer\library\libutil\src\exec_prog.c EXECPROG:errno=%d:stat_loc=0x%X:ret=%d:pid=%d,child=%d
E16908 v_dialer\library\libutil\src\exec_prog.c PID(%d)Relaying signal=%d to child_pid=%d
E16909 v_dialer\library\libutil\src\exec_prog.c PID(%d)Ignoring signal=%d
E16910 v_dialer\library\libutil\src\exec_prog.c PID(%d)Activating Default Signal Handler
E16911 v_dialer\library\libutil\src\exec_prog.c PID(%d)Returning to exec_prog() Routine
E16912 v_dialer\library\libutil\src\exec_prog.c PID(%d)Calling Primary Signal Handler
E17000 v_dialer\library\libutil\src\account.cv_dialer\library\libutil++\src\account_r.c
Error: system message '%s' not found
E17001 Error: unable to open account file '%s'
E17002 Error: unknown user '%s' specified.
E17003 v_dialer\dialer\DialerCmdCtrl\AgentLib.cpp
Error: unknown group '%s' specified.
E17004 Error: chown ('%s', %d, %d) failed.
E17005 v_dialer\library\libutil\src\config.c Error: malloc ('%s') failed.
E17100 getconfig: File '%s' is empty
E17101 getconfig: Couldn't open file '%s'
E18200 v_dialer\library\libswif\src\port_dg.c DISABLE INBOUND FAILED: (%d)%s
E18201 v_dialer\library\libswif\src\port_dg.c ENABLE INBOUND FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
E18202 v_dialer\library\libswif\src\port_dg.c PORTER%d: switch out of sync
E18203 v_dialer\dialer\src\core\msg_loader.cv_dialer\library\libswif\src\port_dg.c
Download of voice prompt file [%s] failed
Maintenance and Troubleshooting Guide March 2008 299
E18204 v_dialer\library\libswif\src\port_dg.c CALL FAILED ON %d: %s
E18205 v_dialer\library\libswif\src\port_dg.c ORULE OVERRIDE DISABLE FAILED: %s
E18206 v_dialer\library\libswif\src\port_dg.c HANGUP FAILED FOR %d: %s, ns=%x, rsb=%x, cause_IE=%x
E18207 v_dialer\library\libswif\src\port_dg.c HANGUP FAILED: EQUIP= %d
E18208 v_dialer\library\libswif\src\port_dg.c TRNSFR Transfer trunks not configured
E18209 v_dialer\library\libswif\src\port_dg.c TRNSFR No transfer trunks available
E18210 dialer_library\libswif\src\port_dg.c TRNSFR Transfer dial failed
E18211 TRNSFR Transfer Failed
E18212 v_dialer\library\libswif\src\port_dg.c TRNSFR Failed to put line on hold
E18213 v_dialer\library\libswif\src\port_dg.c RESPONSE FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
E18214 v_dialer\library\libswif\src\port_dg.c DOWNLOAD FAILED: file=%s, %s, ns=%x, rsb=%x, cause_IE=%x
E18215 v_dialer\library\libswif\src\port_dg.c TRANSFER DIAL FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
E18216 TRANSFER CONFERENCE FAILED: (%d)%s, ns=%x
E18217 Porter %d failed to busy-out line
E18218 Porter %d abandoned inbound call
E18219 v_dialer\library\libswif\src\port_dg.c DELIVER FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
E18220 v_dialer\library\libswif\src\port_dg.c POLL_MSG FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
E18221 v_dialer\library\libswif\src\port_dg.c OFFHOOK FAILED FOR %d: %s, ns=%x, rsb=%x, cause_IE=%x
300 Maintenance and Troubleshooting Guide March 2008
E18222 v_dialer\library\libswif\src\port_dg.c HOOKFLASH FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
E18223 v_dialer\library\libswif\src\port_dg.c STUTTERED DIALTONE TEST FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
E18224 v_dialer\library\libswif\src\port_dg.c DIAL FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
E18225 v_dialer\library\libswif\src\port_dg.c TRANSFER OFFHOOK FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
E18226 v_dialer\library\libswif\src\port_dg.c CAMPON FAILED equip_no=%d: %s, ns=%x, rsb=%x, cause_IE=%x, status=%d
E18227 v_dialer\library\libswif\src\port_dg.c POLL_EVENT FAILED: (%d)%s, ns=%x, rsb=%x, cause_IE=%x
E18228 v_dialer\library\libswif\src\port_dg.c TRNSFR Failed to find job specified holdmsg number in voicemsg.cfg
E18400 v_dialer\library\libswif\src\swid.c swid_process_report: bad ns = 0x%04x
E18401 v_dialer\library\libswif\src\swid.c swid_process_report: bad 0x%x reply
E18402 v_dialer\library\libswif\src\swid.c swid_process_report: bad <port> in 0x%x reply
E18403 v_dialer\library\libswif\src\swid.c swid_process_report: 0x%x reply <control_port> out of range.
E18404 v_dialer\library\libswif\src\swid.c swid_process_report: 0x69 reply on inactive virtual port (0x%04x).
E18405 v_dialer\library\libswif\src\swid.c swid_process_report: 0x69 reply <outgoing_port=0x%03x> out of range.
E18406 v_dialer\library\libswif\src\swid.c swid_report_72(reset): bad NSB.
E18407 v_dialer\library\libswif\src\swid.c swid_process_report: bad port = %d(0x%03x) in 0xDA reply
Maintenance and Troubleshooting Guide March 2008 301
E18408 v_dialer\library\libswif\src\swid.c swid_process_report: Ignored 0x%x report on port=%d(0x%03x),supcode=0x%04x
E18409 v_dialer\library\libswif\src\swid.c swid_process_report: unknown/unexpected change
E18410 v_dialer\library\libswif\src\swid.c (%d)/event %s(%d) on port (0x%03x).
E18411 v_dialer\library\libswif\src\swid.c swid_process_report: bad port %d(0x%03x) in 0xDB reply
E18412 v_dialer\library\libswif\src\swid.c change=%x
E18413 v_dialer\library\libswif\src\swid.c swid_process_report: <port> (0x%03x) in 0xDD reply not enabled for inbound
E18414 v_dialer\library\libswif\src\swid.c swid_process_report: 0x49 reply on inactive virtual port (0x%04x).
E18415 v_dialer\library\libswif\src\swid.c swid_process_report: 0x49 reply <outgoing_port=0x%03x> out of range.
E18416 v_dialer\library\libswif\src\swid.c swid_process_report: bad port = %d(0x%03x) in 0xEA reply
E19000 v_dialer\library\libswif\src\swie.c '%s' not in /etc/hosts!
E19001 v_dialer\library\libswif\src\swie.c swif: '%s' cannot create socket!
E19002 v_dialer\library\libswif\src\swie.c swif: cannot connect to ethernet switch port '%s:%d',(%d)
E19003 v_dialer\library\libswif\src\swie.c swif: cannot set socket option SO_KEEPALIVE, err(%d)
E19004 v_dialer\library\libswif\src\swie.c Failed to read packet header (%d,%d)
E19005 v_dialer\library\libswif\src\swie.c Failed to read packet body (%d,%d)
E19006 v_dialer\library\libswif\src\swie.c ethernet receive buffer too small
E19007 v_dialer\library\libswif\src\swie.c swif: listener cannot swic_init_client()
E19200 v_dialer\library\libswif\src\swiq.c Unable to save switch log history
302 Maintenance and Troubleshooting Guide March 2008
E19201 v_dialer\library\libswif\src\swiq.c Log event from %s line %d is being throttled.
E19400 v_dialer\library\libswif\src\switch_dg.c Unable to initialize switch channel, swif return=[%d]
E19401 v_dialer\library\libswif\src\switch_dg.c Failed to reset switch channel
E19402 v_dialer\library\libswif\src\switch_dg.c %s TONE DOWNLOAD FAILED, %s, ns=%x, rsb=%x, cause_IE=%x
E19403 v_dialer\library\libswif\src\switch_dg.c GREETING PROMPT DOWNLOAD FAILED, %s, ns=%x, rsb=%x, cause_IE=%x
E19404 v_dialer\library\libswif\src\switch_dg.c Failed to reset switch, swif return=[%d],ns=%x, rsb=%x, cause_IE=%x
E19405 v_dialer\library\libswif\src\switch_dg.c ZIP TONE FAILED, %s, ns=%x, rsb=%x, cause_IE=%x, equip=%d
E19406 v_dialer\library\libswif\src\switch_dg.cv_dialer\library\libswif\src\port_sd.c
CONNECT RESPONSE: %s, ns=%x, rsb=%x, cause_IE=%x, equip1:%d, equip2:%d
E19407 v_dialer\library\libswif\src\switch_dg.c DISCONNECT RESPONSE: %s, ns=%x, rsb=%x, cause_IE=%x, equip:%d,
E19408 v_dialer\library\libswif\src\switch_dg.c Invalid prompt index:%d
E19600 v_dialer\library\libswif\src\swix.c unexpected EOF/incomplete comment
E19601 v_dialer\library\libswif\src\swix.c non-ASCII character.
E19602 dialer_library\libswif\src\swix.c Error reading exercise script '%%s':
E19603 v_dialer\library\libswif\src\swix.c line %%d:
E19604 v_dialer\library\libswif\src\swix.c event table full
E19605 v_dialer\library\libswif\src\swix.c not a SWIF function name
E19606 v_dialer\library\libswif\src\swix.c expecting a time value, digits only, enclosed in ()
E19607 v_dialer\library\libswif\src\swix.c expecting closing paren
E19608 v_dialer\library\libswif\src\swix.c expecting SWIF event name
Maintenance and Troubleshooting Guide March 2008 303
E19609 v_dialer\library\libswif\src\swix.c too many exercise script errors -- aborting!
E25000 v_dialer\dialer\src\callsel\call_scrn.c Recall field name or value missing
E25001 v_dialer\dialer\src\callsel\call_scrn.c Recall field name not found
E25002 v_dialer\dialer\src\callsel\call_scrn.c Recall pattern error: %s
E25003 v_dialer\dialer\src\callsel\callsel.cv_dialer\dialer\src\core\agent_misc_util.c
%s - Failed to locate strategy files
E25004 v_dialer\dialer\src\callsel\call_scrn.c Unknown time zone designator %c
E25005 v_dialer\dialer\src\callsel\call_scrn.c No time zones selected
E25007 Missing field name or value at recall entry %d
E25008 v_dialer\dialer\src\callsel\call_scrn.c Group may not begin with no selection
E25009 Gap found between select fields within group
E25010 v_dialer\dialer\src\callsel\call_scrn.c Field name not found at recall entry %d
E25011 v_dialer\dialer\src\callsel\call_scrn.c Pattern error at recall entry %d: %s
E25012 v_dialer\dialer\src\callsel\call_scrn.c Sort direction is invalid
E25013 Sort field name not found
E25014 v_dialer\dialer\src\callsel\call_scrn.c Unit work list Key field name missing
E25015 v_dialer\dialer\src\callsel\call_scrn.c Unit work list Key field name not found
E25016 v_dialer\dialer\src\callsel\call_scrn.c Strategy file name missing
E25017 v_dialer\dialer\src\callsel\call_scrn.c Strategy file name not found
E25018 v_dialer\dialer\src\callsel\call_scrn.c Unable to read strategy file
E25019 v_dialer\dialer\src\callsel\call_scrn.c %s - Unable to initialize strategy table
E25020 v_dialer\dialer\src\callsel\callsel.c %s - Time zoning of phone numbers not done on calling list
304 Maintenance and Troubleshooting Guide March 2008
E25021 v_dialer\dialer\src\callsel\callsel.c %s - Master calling list error
E25022 v_dialer\dialer\src\callsel\callsel.c %s - Unable to get callsel number
E25023 v_dialer\dialer\src\callsel\callsel.c %s - List selection aborted
E25024 v_dialer\dialer\src\callsel\call_scrn.c %s - Calling List %s is not Time Zoned
E25025 v_dialer\dialer\src\callsel\call_scrn.c %s - %s field not defined or incorrect length
E25026 v_dialer\dialer\src\callsel\callsel.c Callsel verification failed. Please use change option
E25027 Improper Usage
E25028 v_dialer\dialer\src\callsel\callsel.c Special time zone + is not available
E25029 v_dialer\dialer\src\callsel\call_scrn.c Report field name not found
E25030 You must specify at least one field
E25031 v_dialer\library\libcallsel\src\cllcallsel.cpp
Timeout: failed to identify status of the Index Processing within %d seconds
E25032 v_dialer\library\libcallsel\src\cllcallsel.cpp
Failed to start asynchronous Index Processing sub-process
E25501 v_dialer\dialer\src\callsel\callconn.c Callsel terminated by signal = %d
E25502 v_dialer\dialer\src\callsel\callconn.c Callsel exited with status of %o (octal)
E25503 v_dialer\dialer\src\callsel\callconn.c Couldn't open file %s
E25504 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\callsel\callconn.c
Failed to read file %s
E25505 v_dialer\dialer\src\callsel\callconn.c callconn:fail to send zALTQUE msg
E27000 midtier\unixdev\ServiceMonitor\src\ServiceMonitor_ServiceController.cxxmidtier\unixdev\SysHealth\src\SystemHealthImpl.cppv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
Invalid input parameter(s)
Maintenance and Troubleshooting Guide March 2008 305
E27100 midtier\unixdev\ServiceMonitor\src\ServiceMonitor_ServiceController.cxxmidtier\unixdev\ServiceMonitor\src\ServiceMonitor_ServiceMonitorIFImpl.cxxmidtier\unixdev\SysHealth\src\SystemHealthImpl.cppv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
Failed to process the method
E27200 Failed to open the file
E27300 midtier\unixdev\ServiceActivation\src\SARequest.cxxmidtier\unixdev\ServiceActivation\src\ServiceActivationIFImpl.cxxmidtier\unixdev\ServiceMonitor\src\ServiceMonitor_ServiceMonitorIFImpl.cxxv_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
Failed to activate the service
E28000 v_dialer\dialer\src\core\switcher.c Failed to initialize switcher
E28100 v_dialer\dialer\src\core\driver.c Unable to attach to data segment
E28101 v_dialer\dialer\src\core\driver.c invalid channel number %s
E28102 couldn't open switch channel
E28103 v_dialer\dialer\src\core\driver.c *** no active channel !!
E28104 v_dialer\dialer\src\core\driver.c 'memory' is not implemented
E28105 cannot attach to ipc queue, retval=%d, errno=%d
E28106 v_dialer\dialer\src\core\driver.c equipment number type not found
E28107 v_dialer\dialer\src\core\driver.c no seize on ISDN ports
E28108 v_dialer\dialer\src\core\driver.c no drop on ISDN ports
E28109 v_dialer\dialer\src\core\driver.c UNRECOGNIZED COMMAND! %s
E28200 v_dialer\dialer\src\core\conn_mgr.c %s - Job %s %s already exists
E28201 v_dialer\dialer\src\core\conn_mgr.c %s - Job %s %s does not exist
E28202 v_dialer\dialer\src\core\conn_mgr.c %s - Exceeded shared segment limit
306 Maintenance and Troubleshooting Guide March 2008
E28203 v_dialer\dialer\src\core\conn_mgr.c %s - No phone calls in wait but wait count disagrees
E28204 v_dialer\dialer\src\core\conn_mgr.c %s (test_inbound_service) - Conn_op_line failed
E28205 v_dialer\dialer\src\core\conn_mgr.c %s - Invalid slot number(%d) passed
E28206 v_dialer\dialer\src\core\conn_mgr.c %s - Invalid agent number %d
E28207 v_dialer\dialer\src\core\conn_mgr.c %s - Invalid call trans type %c
E28208 v_dialer\dialer\src\core\conn_mgr.c No oper_name ('%s') or oper_jobnum (%d), cannot archive
E28209 v_dialer\dialer\src\core\conn_mgr.c No oper_name ('%s') or oper_jobnum (%d), cannot restore
E28210 v_dialer\dialer\src\core\conn_mgr.c No oper_name ('%s'), cannot restore
E28211 v_dialer\dialer\src\core\conn_mgr.c No jobname ('%s') or jobnum (%d), cannot archive
E28300 Unable to create a list of extensions
E28301 v_dialer\dialer\src\core\conn_mgr.c add_agent: Unable to insert agent
E28302 v_dialer\dialer\src\core\conn_mgr.c add_agent: entered a duplicate value
E28303 v_dialer\dialer\src\core\conn_mgr.c add_agent: Error getting current pointer
E28304 v_dialer\dialer\src\core\conn_mgr.c agent_recall: Unable to insert recall
E28305 v_dialer\dialer\src\core\conn_mgr.c recall_rmp - Exit since AGENTOWNRECALL is off
E28306 v_dialer\dialer\src\core\conn_mgr.c recall_rmp - Unable to create a list of agent
E28307 v_dialer\dialer\src\core\conn_mgr.c recall_rmp - Unable to create a list of recall
E28308 v_dialer\dialer\src\core\conn_mgr.c recall_rmp - unknown message received '%s'
E28309 v_dialer\dialer\src\core\conn_mgr.c Failed to setup ipc for agent %s
Maintenance and Troubleshooting Guide March 2008 307
E28310 v_dialer\dialer\src\core\listops.cv_dialer\dialer\src\core\recall_rmp.c
recall_rmp - agent %s not available
E28400 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Sales verification or managed dialing must have agents
E28401 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Managed dialing is not permitted with sales verification or inbound
E28402 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Virtual agents cannot select a specific unit to log in to
E28404 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Sales verification is not permitted with unit work lists
E28405 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Sales verification is not permitted with inbound
E28406 v_dialer\dialer\src\core\listops.c Inbound with unshared account ownership is not permitted
E28407 v_dialer\dialer\src\core\listops.c Alternate selection %s is not permitted with unit work lists
E28408 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\nuisance.c
%s - Failed to get job number
E28409 v_dialer\dialer\src\core\caller.c Job startup failed in job configuration
E28410 v_dialer\dialer\src\core\caller.c Job setup incomplete, Aborting %s
E28411 v_dialer\dialer\src\core\caller.c %s - Unknown message: %s, %s, %s
E28412 v_dialer\dialer\src\core\caller.c %s - Not an inbound capable system
E28413 %s - Failed to setup hunt group
E28414 %s - Invalid hunt group
308 Maintenance and Troubleshooting Guide March 2008
E28415 v_dialer\dialer\src\core\caller.c %s - Failed to receive a job info position
E28416 v_dialer\dialer\src\core\caller.c %s - FATAL_ERROR: %s
E28417 v_dialer\dialer\src\core\listops.c %s - Record length greater than %d
E28418 v_dialer\dialer\src\core\listops.c %s - Failed on verifying assoc. list
E28419 v_dialer\dialer\src\core\listops.c %s - Failed on reading assoc. list
E28420 v_dialer\dialer\src\core\listops.c %s - Master calling list error
E28421 v_dialer\dialer\src\core\listops.c %s - Invalid strategy: %s
E28422 v_dialer\dialer\src\core\listops.c %s - Failed to table strategy file: %s
E28423 v_dialer\dialer\src\core\listops.c %s - Index file not created with calling list %s
E28424 v_dialer\dialer\src\core\listops.c %s - Exceeded record slots available,PORTCOEF may be low
E28425 v_dialer\dialer\src\core\listops.c %s(%s) - Record number returned invalid %d
E28426 v_dialer\dialer\src\core\listops.c %s(%s) - Record number returned wrong %d, job number %d
E28427 v_dialer\dialer\src\core\listops.c Failed to attach to semaphore
E28428 v_dialer\dialer\src\core\listops.cv_dialer\dialer\DialerCmdCtrl\ErrorHandling_utest.cpp
Failed to read selection criteria file:%s
E28429 v_dialer\dialer\src\core\caller.c %s - Call cancel is not permitted
E28430 v_dialer\dialer\src\core\caller.c Job linking is not permitted
E28431 v_dialer\dialer\src\core\job_strter.c ERROR: EDTFILE not specified in job file %s
E28432 v_dialer\dialer\src\core\job_strter.c ERROR: Failed to fork job %s (error=%d)
E28433 v_dialer\dialer\src\core\job_strter.c ERROR: Failed to exec job %s
Maintenance and Troubleshooting Guide March 2008 309
E28434 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\job_strter.c
ERROR: Failed to invoke wait for job %s (error=%d)
E28435 v_dialer\dialer\src\core\job_strter.c Next job %s started
E28436 v_dialer\dialer\src\core\job_strter.c Next job %s error: %s
E28437 v_dialer\dialer\src\core\job_strter.c Next job %s terminated by signal %d
E28438 v_dialer\dialer\src\core\job_strter.c Next job %s stopped by signal %d
E28439 v_dialer\dialer\src\core\caller.c ERROR: Next job %s already starting up.
E28440 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\caller.c
Caller(launch_posttrans) - Failed to invoke function fork, err=%d
E28441 v_dialer\dialer\src\core\caller.c Caller(launch_posttrans) - Failed to invoke function rtprio, err=%d
E28442 v_dialer\dialer\src\core\caller.c Caller(launch_posttrans) - Failed to invoke function pipe, err=%d
E28443 v_dialer\dialer\src\core\listops.c %s - Failed to create calling script %s
E28444 Caller - Failed to get port matching label %s N%s
E28445 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\joblib.c
%s - Failed to terminate proc %d for Agent %s
E28446 caller:fail to send %s to %s
E28447 v_dialer\dialer\src\core\caller.c caller:fail to get shadowjobname
E28448 v_dialer\dialer\src\core\caller.c Job(%s) '%s' sent to a non shadow job
E28449 v_dialer\dialer\src\core\caller.c Caller - PostTrans:Failed to exec prog '%s'
E28450 v_dialer\dialer\src\core\listops.c Caller - %s (R%d) (N%s)
E28451 v_dialer\dialer\src\core\listops.c Job(%s):%s: no available line
E28452 v_dialer\dialer\src\core\listops.c Job(%s):%s: no available record slot
310 Maintenance and Troubleshooting Guide March 2008
E28453 v_dialer\dialer\src\core\listops.c Job(%s):%s:No recall found in queue
E28454 v_dialer\dialer\src\core\listops.c Job(%s):%s:Invalid phone for this recall, rec_slot=%d
E28455 v_dialer\dialer\src\core\listops.c Job(%s):%s:Same record (%d)is opened
E28456 v_dialer\dialer\src\core\listops.c Job(%s):%s:Record %d is locked
E28457 v_dialer\dialer\src\core\listops.c Job(%s):%s:Failed to read record %d
E28458 v_dialer\dialer\src\core\listops.c Job(%s)::Failed to get phone number:%s
E28459 v_dialer\dialer\src\core\listops.c Job(%s)!get_ft_sort_key!clread error rec_num=%d
E28460 v_dialer\dialer\src\core\listops.c Job(%s):PostTrans:Failed to write pipe, recnum = %d, errno = %d
E28461 v_dialer\dialer\src\core\listops.c Listops(pvrs_record_load) - Record number transferred is bad (%d)
E28462 v_dialer\dialer\src\core\listops.c Preview Empty Record with Multi Units is not allowed.
E28463 v_dialer\dialer\src\core\port_hndle.c Caller - RTSTATS is YES but failed to get operstats_base and/or job_stats_base
E28464 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.c
Invalid name (%s) for IVR pool job
E28465 Data process label '%s' for job '%s' missing/invalid
E28600 v_dialer\dialer\src\core\porter.c %s - Invalid port number assigned
E28601 v_dialer\dialer\src\core\porter.c Porter %d - Line inoperable
E28602 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\utility\list_status.cv_dialer\dialer\enforcer\src\enforcer.cppv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\core\recall_rmp.c
%s - Failed to setup input IPC.
Maintenance and Troubleshooting Guide March 2008 311
E28603 v_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\core\port_hndle.cv_dialer\dialer\src\core\portevent.cv_dialer\dialer\src\core\porter.c
%s - Failed to setup conn_mgr IPC.
E28604 Failed on inbound list def. %s
E28605 Failed on outbound list def. %s
E28606 v_dialer\dialer\src\core\scripter.c No extension number for the IVR to dial
E28607 v_dialer\dialer\src\core\scripter.c No ring command for IVR to run an application
E28608 v_dialer\dialer\src\core\scripter.c HOOKIVR: No dial tone from PBX
E28609 v_dialer\dialer\src\core\scripter.c %s - Preview failed to find agent %s
E28610 %s - Mdial failed to find agent %s
E28611 v_dialer\dialer\src\core\scripter.c Not allowed in wait
E28612 v_dialer\dialer\src\core\scripter.c Request out of sequence
E28613 v_dialer\dialer\src\core\scripter.c Missing preview
E28614 v_dialer\dialer\src\core\scripter.c Second transaction
E28615 No text in script
E28616 v_dialer\library\libdsi\src\script_lng.c Script missing label %s
E28617 v_dialer\dialer\src\core\listops.c Op keys missing label %s
E28618 v_dialer\dialer\src\core\listops.c Job - Data script %s label missing
E28619 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Job - Inbound script label %s missing/invalid
E28620 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\listops.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Job - Outbound script label for call %s missing/invalid
312 Maintenance and Troubleshooting Guide March 2008
E28621 Failed to set DAA type:
E28622 Failed to set country code:
E28623 Porter %d failed to busy-out line
E28624 Porter %d abandoned inbound call
E28625 Failed to set DAA type: %d, Porter%d, %d
E28626 v_dialer\dialer\src\core\porter.c Porter %d: Line Fail:
E28627 v_dialer\dialer\src\core\porter.c %s - Invalid line class %c
E28628 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\core\scripter.c
Transfer failed, try again later
E28629 v_dialer\dialer\src\core\scripter.c No agent available, try again later
E28630 v_dialer\dialer\src\core\scripter.c NO DIAL TONE
E28631 v_dialer\dialer\src\core\scripter.c M %d > MAX
E28632 v_dialer\dialer\src\core\scripter.c M %d < MIN
E28633 v_dialer\dialer\src\core\scripter.c Porter - bld_dspmesg:message too long for internal buffer
E28634 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Job - Transfer Wait Queue script label %s missing/invalid
E28800 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Recall can't be less than %d minutes
E28801 v_dialer\dialer\src\core\screen.c Record is busy
E28802 v_dialer\dialer\src\core\screen.c Recall not allowed for inbound call
E28803 Transfer setup failed
E28804 v_dialer\dialer\src\core\agent.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Job %s not running
Maintenance and Troubleshooting Guide March 2008 313
E28805 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Job %s not ready - Log on later
E28806 %s - Failed to find job name %s in data seg
E28807 Agent number (%d) invalid
E28808 Headset (%s) not specified in %s file
E28809 %s not specified in switch.cfg file
E28810 Duplicate headset ID (%d) already in use by agent %s
E28811 Duplicate headset ID (%d) already in use
E28812 v_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\operator.c
Agent %s logged in Already - Access Denied
E28813 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Maximum %s agent limit reached
E28814 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Managed agents are not permitted on this job
E28815 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Sales verification with unit work lists is not permitted
E28816 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Inbound agents only permitted
E28817 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Outbound agents only permitted
E28818 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Outbound or Managed agents only permitted
E28819 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Only outbound agents permitted by sales verification
E28820 v_dialer\dialer\src\core\operator.c Unit value not found, or unavailable
E28821 v_dialer\dialer\src\core\screen.c Cannot be DONE from alternate screen
314 Maintenance and Troubleshooting Guide March 2008
E28822 v_dialer\dialer\src\core\screen.c Line not released
E28823 Failed to save record
E28824 v_dialer\dialer\src\core\screen.c Changes to record not saved
E28825 v_dialer\dialer\src\core\screen.c Record not found
E28826 v_dialer\dialer\src\core\screen.c Record is no longer available
E28827 v_dialer\dialer\src\core\screen.c Failed to unlock record
E28828 v_dialer\dialer\src\core\screen.cv_dialer\dialer\src\utility\shmon.c
Unknown screen type
E28829 v_dialer\dialer\src\core\screen.c Field entry is required
E28830 v_dialer\dialer\src\core\screen.c Field value not in acceptable list
E28831 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Field has non-numeric value
E28832 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
%s doesn't match %s format
E28833 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid month in date
E28834 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid year in date
E28835 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid day in date
E28836 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid format character found
E28837 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid hour in time
E28838 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid minute in time
E28839 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid second in time
E28840 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Time is not in correct format
E28841 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid phone
Maintenance and Troubleshooting Guide March 2008 315
E28842 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid phonestat - %c
E28843 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid phone number - %s
E28844 v_dialer\dialer\src\core\screen.c No REL_DIST setting
E28845 v_dialer\dialer\src\core\screen.c No REL_TME setting
E28846 v_dialer\dialer\src\core\screen.c No DONE_TME setting
E28847 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Date is before the current date
E28848 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Recall time and date outside timezone
E28849 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
%s - Record's timezone is unknown
E28850 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\screen.c
ERROR: Cannot open channel to operator monitor process
E28851 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\screen.c
ERROR: Operator monitor process does not respond
E28852 ERROR: HEADSET IS NOT ACTIVE
E28853 Error sending digits to switch
E28854 DIALDIGIT Customer Hangup(%d)
E28855 DIALDIGIT Dial Error=%d
E28856 v_dialer\dialer\src\core\screen.c ERROR: Invalid response from operator monitor process
E28857 Feature only available for DIGITAL switch
E28858 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\operator.c
%s - Exceeded operator slots available,MAXOPS is low
E28859 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\operator.c
%s(%s) - Operator number returned invalid %d
316 Maintenance and Troubleshooting Guide March 2008
E28860 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
%s(%s) - Operator number returned wrong %d, job number %d
E28861 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\operator.c
Operator slot semaphore not available
E28862 v_dialer\dialer\src\core\agent.c FATAL ERROR ON SELECT - %d
E28863 v_dialer\dialer\src\core\agent.c ERROR - Unknown file descriptor
E28864 v_dialer\dialer\src\core\agent_io_util.cv_dialer\dialer\src\core\job_strter.c
Unknown IPC message - %s
E28865 v_dialer\dialer\src\core\agent_io_util.c Unknown Command message - %s
E28866 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\screen.c
Telephone line not available
E28867 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\agent_tdss_util.c
Telephone line not offhook
E28868 v_dialer\dialer\src\core\agent.c Callbacks are not permitted on inbound calls
E28869 v_dialer\dialer\src\core\agent.c Headset volume must be in the range of 1 to 8
E28870 v_dialer\dialer\src\core\agent_hs_util.c Reserve headset id request pending
E28871 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
Invalid headset id - %s, %s
E28872 v_dialer\dialer\src\core\agent_hs_util.c Headset already connected
E28873 v_dialer\dialer\src\core\agent_hs_util.c Headset ID not reserved nor validated
E28874 v_dialer\dialer\src\core\agent_hs_util.c Connect headset request pending
E28875 v_dialer\dialer\src\core\agent_hs_util.c No headset connect request pending
Maintenance and Troubleshooting Guide March 2008 317
E28876 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
Headset not connected
E28877 v_dialer\dialer\src\core\agent_hs_util.c Disconnect headset request pending
E28878 No headset disconnect request pending
E28879 Headset not disconnected
E28880 v_dialer\dialer\src\core\agent_hs_util.c Headset connection broken
E28881 v_dialer\dialer\src\core\agent_hs_util.c Headset connection re-connected
E28882 v_dialer\dialer\src\core\agent.c Already available for work - Cannot change class
E28883 v_dialer\dialer\src\core\agent.c Invalid work class
E28884 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
Not attached to data shared memory
E28885 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\agent_pvrs_util.c
Not attached to a job
E28886 v_dialer\dialer\src\core\agent.c Unit work lists are not permitted on this job
E28887 v_dialer\dialer\src\core\agent.c Already available for work - Cannot change unit id
E28888 v_dialer\dialer\src\core\agent.c Unit id not found
E28889 v_dialer\dialer\src\core\agent.c Attached to a job already - Must detach first
E28890 v_dialer\dialer\src\core\agent.c Failure to open job %s resource file
E28891 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
Must specify INBOUND or OUTBOUND operation
E28892 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
No inbound calling list fields available
318 Maintenance and Troubleshooting Guide March 2008
E28893 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
No outbound calling list fields available
E28894 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
Field name not found
E28895 v_dialer\dialer\src\core\agent.c Already available for work
E28896 v_dialer\dialer\src\core\agent.c Headset must be active
E28897 v_dialer\dialer\src\core\agent.c Available for work request pending
E28898 v_dialer\dialer\src\core\agent.c Job not available
E28899 v_dialer\dialer\src\core\agent.c No available for work request pending
E28900 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\agent_hs_util.c
Wrong message id received - %s
E28901 v_dialer\dialer\src\core\agent.c Not available for work
E28902 v_dialer\dialer\src\core\agent.c Already on work item
E28903 v_dialer\dialer\src\core\agent.c Already set ready for next work item
E28904 v_dialer\dialer\src\core\agent.c Request for no further work pending
E28905 v_dialer\dialer\src\core\agent.c Request to transfer to another job is active
E28906 v_dialer\dialer\src\core\agent.c Not ready for next work item
E28907 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_pvrs_util.c
Not a managed dialing job
E28908 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_pvrs_util.c
Not on work item
E28909 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_pvrs_util.c
Managed call already complete
E28910 v_dialer\dialer\src\core\agent.c Managed call cancelled or complete
E28911 v_dialer\dialer\src\core\agent.c Managed call cancelled
Maintenance and Troubleshooting Guide March 2008 319
E28912 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_misc_util.c
Data record not available for update
E28913 v_dialer\dialer\src\core\agent.c No job attached
E28914 v_dialer\dialer\src\core\agent.c Still available for work on the job
E28915 v_dialer\dialer\src\core\agent.c Not logged off job yet
E28916 v_dialer\dialer\src\core\agent_misc_util.c
Job attached - Must detach first
E28917 v_dialer\dialer\src\core\agent.c No job attached
E28918 v_dialer\dialer\src\core\agent.c Not avail for work on the job
E28919 v_dialer\dialer\src\core\agent.c Not currently assigned to a work item
E28920 v_dialer\dialer\src\core\agent_hs_util.c Headset ID not found in reserved list - %s
E28921 v_dialer\dialer\src\core\agent_misc_util.c
FATAL ERROR ABORTING
E28922 v_dialer\dialer\src\core\agent_hs_util.c No reserve headset id request pending
E28923 v_dialer\dialer\src\core\agent_hs_util.c Headset ID - %s already reserved
E28924 v_dialer\dialer\src\core\agent_io_util.c Must sign on system first
E28925 v_dialer\dialer\src\core\agent_misc_util.c
Already signed on the system
E28926 v_dialer\dialer\src\core\agent_misc_util.c
Invalid sign on
E28927 v_dialer\dialer\src\core\agent.c Agent - Unable to open command input socket - errno:%d
E28928 v_dialer\dialer\src\core\agent.c Agent - Unable to find agent service entry in /etc/services
E28929 v_dialer\dialer\src\core\agent.c Agent - Unable to bind to local address - errno:%d
E28930 v_dialer\dialer\src\core\agent.c Agent - Unable to setup listen on socket - errno:%d
E28931 v_dialer\dialer\src\core\agent.c Agent - Fork of process failed - errno:%d
320 Maintenance and Troubleshooting Guide March 2008
E28932 v_dialer\dialer\src\core\agent.c Agent - Accept socket connection call failed - errno:%d
E28933 v_dialer\dialer\src\core\agent_io_util.c Agent - Read error on client command socket - count:%d, errno:%d
E28934 v_dialer\dialer\src\core\agent_io_util.c Agent - Send error on client command socket - errno:%d
E28935 v_dialer\dialer\src\core\agent_misc_util.c
Agent - Parent process exiting
E28936 v_dialer\dialer\src\core\agent.c Agent - Setting of linger failed - errno:%d
E28937 v_dialer\dialer\src\core\operator.c %s agent is not allowed
E28938 v_dialer\dialer\src\core\api_jobctl.c Invalid phone type
E28940 v_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\transfer.c
Operator - data_synced timeout, data may not be updated
E28942 v_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\screen.c
Job %s is not available
E28943 v_dialer\dialer\src\core\screen.c Invalid key
E28944 v_dialer\dialer\src\core\screen.c COLONS(:) NOT ALLOWED IN PHONE FIELD
E28945 v_dialer\dialer\src\core\operator.c Managed agents only permitted
E28946 v_dialer\dialer\src\core\agent.c Agent not acquired yet
E28947 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Invalid call completion code %s
E28948 v_dialer\dialer\src\core\joblib.c Jobmon found incorrect PID %d when releasing opslot %d
E28949 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Unable to mark as DO NOT CALL
E28950 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
Extension not in database
E28951 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
Extension in use
E28952 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
Cannot add agent
Maintenance and Troubleshooting Guide March 2008 321
E28953 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
Acd_ext file read failed
E28954 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
Duplicate login - please try again
E28955 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
DNC cannot find key field %s
E28956 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.c
ACD Login Error
E28957 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Unable to mark other calling lists
E28958 v_dialer\dialer\src\core\donotcall.c Do Not Call group '%s' not defined
E28959 v_dialer\dialer\src\core\operator.c Invalid Agent Type
E28960 v_dialer\dialer\src\core\dnc_mark.c HASH key %s not defined in calling list %s
E28961 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\operator.c
Invalid Jobname
E28962 v_dialer\dialer\src\core\operator.c ERROR - Unknown file descriptor
E28963 v_dialer\dialer\src\core\screen.c ZONEPHONE%d field not set
E28964 v_dialer\dialer\src\core\agent.c Agent phone is busy. Release phone line before proceeding.
E28965 v_dialer\dialer\src\core\agent.c Softdialer link is down. Please wait until the link is up.
E28966 v_dialer\dialer\src\core\operator.c Invalid headset ID
E28967 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\core\screen.c
Agent is not allowed to logoff
E28968 v_dialer\dialer\src\core\operator.c Failed to register with dispatcher
E28969 v_dialer\dialer\src\core\agent_pvrs_util.c Operator - init_op_cntrl() invoked with NULL curr_op_ptr
E28970 v_dialer\dialer\src\core\agent_pvrs_util.cv_dialer\dialer\src\core\operator.c
Error queuing jobname data in list_running_jobs
322 Maintenance and Troubleshooting Guide March 2008
E28971 v_dialer\dialer\src\core\agent_pvrs_util.cv_dialer\dialer\src\core\oper_pvrs.cv_dialer\dialer\src\core\screen.c
Operator - cannot access job resource file
E28972 v_dialer\dialer\src\core\agent_pvrs_util.cv_dialer\dialer\src\core\oper_pvrs.cv_dialer\dialer\src\core\screen.c
Operator - Timed out while waiting for job resouce file
E28973 v_dialer\dialer\src\core\agent_pvrs_util.cv_dialer\dialer\src\core\oper_pvrs.cv_dialer\dialer\src\core\screen.c
Operator - Cannot setup screen '%s'.
E28974 v_dialer\dialer\src\core\agent_pvrs_util.cv_dialer\dialer\src\core\screen.c
Operator - cannot read screen map - %s:%s
E28975 v_dialer\dialer\src\core\screen.c Cannot search when previewing a recall
E28976 v_dialer\dialer\src\core\screen.c Cannot dial from deleted record
E28977 v_dialer\dialer\src\core\operator.c Operator - Failed to initialize signal %s(%d)
E28978 v_dialer\dialer\src\core\operator.c Operator - Failed to ignore signal %s(%d)
E28979 v_dialer\dialer\src\core\screen.c Operator - Failed to enable auto release SIGUSR1 handler
E28980 v_dialer\dialer\src\core\screen.c Operator - Failed to disable auto release SIGUSR1 handler
E28981 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
Invalid format for %s for job %s
E28982 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\screen.c
Managed call cannot be cancelled
E28983 v_dialer\dialer\src\core\agent.c AGTNoFurtherWork is already in progress
E28984 v_dialer\dialer\src\core\agent.c Agent is being released to ACD inbound
E29000 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\api_jobctl.c
Managed dialing capable jobs only
E29001 v_dialer\dialer\src\core\api_jobctl.c Jobmon - Failed on startup
E29002 v_dialer\dialer\src\core\api_jobctl.c Jobmon - Failed to Setup Windows
Maintenance and Troubleshooting Guide March 2008 323
E29006 v_dialer\dialer\src\core\api_jobctl.c Job '%s' not running
E29007 Job not ready, waiting %d seconds...
E29008 Job not Ready - Logon later
E29009 v_dialer\dialer\src\core\api_jobctl.c Outbound capable jobs only
E29010 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\joblib.c
Inbound capable jobs only
E29011 v_dialer\dialer\src\core\api_jobctl.c Not a multi-unit job
E29012 v_dialer\dialer\src\core\api_jobctl.c May only monitor Inbound
E29013 v_dialer\dialer\src\core\api_jobctl.c Invalid number entered
E29014 v_dialer\dialer\src\core\api_jobctl.c Monitoring of phone line disabled
E29015 v_dialer\dialer\src\core\api_jobctl.c Monitoring of agent disabled
E29016 v_dialer\dialer\src\core\api_jobctl.c Invalid port for monitoring agents
E29017 v_dialer\dialer\src\core\api_jobctl.c Agent being monitored
E29018 v_dialer\dialer\src\core\joblib.c No jobs currently running.
E29019 v_dialer\dialer\src\core\api_jobctl.c Error multiple job entrys in SHM
E29020 v_dialer\dialer\src\core\api_jobctl.c No agents having a record available
E29021 v_dialer\dialer\src\core\api_jobctl.c Record no longer available
E29022 v_dialer\dialer\src\core\api_jobctl.c No units currently available
E29023 v_dialer\dialer\src\core\api_jobctl.c No agents available to be killed
E29024 v_dialer\dialer\src\core\api_jobctl.c Invalid entry, no changes saved.
E29025 v_dialer\dialer\src\core\api_jobctl.c No other jobs currently running.
E29026 v_dialer\dialer\src\core\api_jobctl.c No agents currently available.
E29027 v_dialer\dialer\src\core\api_jobctl.c Agent transfer currently being processed.
E29028 v_dialer\dialer\src\core\api_jobctl.c Phone line allocation currently being processed.
E29029 v_dialer\dialer\src\core\api_jobctl.c No jobs currently linked.
324 Maintenance and Troubleshooting Guide March 2008
E29030 v_dialer\dialer\src\core\api_jobctl.c No jobs available for selection.
E29031 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Link Job '%s' already starting up.
E29032 v_dialer\dialer\src\core\api_jobctl.c No phone lines currently acquired
E29033 No request of phone lines currently pending
E29034 No phone lines of type %s acquired
E29035 Job linking capable jobs only
E29036 v_dialer\dialer\src\core\joblib.c Invalid system terminal.
E29037 v_dialer\dialer\src\core\joblib.c WARNING!!!
E29038 v_dialer\dialer\src\core\joblib.c May not monitor op/lines
E29039 Duplicate HEADSET value.
E29040 v_dialer\dialer\src\core\api_jobctl.c Illegal W, Q or U rate setting
E29041 Illegal Hit Rate setting
E29042 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\iicb_conf.c
Allow sending 75 characters
E29043 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\iicb_conf.c
jobmon: failed to send %s to %s
E29044 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\iicb_conf.c
Wrong type %s of message for job_strter
E29045 v_dialer\dialer\src\core\iicb_conf.c Invalid data from system for get_iicb_status
E29046 v_dialer\dialer\src\core\iicb_conf.c Invalid response for list_domain
E29047 v_dialer\dialer\src\core\iicb_conf.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Invalid control method
E29048 v_dialer\dialer\src\core\iicb_conf.c Invalid response for list_group
E29049 v_dialer\dialer\src\core\iicb_conf.c Invalid response for get_group_stats
Maintenance and Troubleshooting Guide March 2008 325
E29050 v_dialer\dialer\src\core\iicb_conf.c Resynch agents is not allowed in the current state
E29051 v_dialer\dialer\src\core\install_ext.c Unable to create a list of extensions
E29052 v_dialer\dialer\src\core\install_ext.c Unable to add extension to list!
E29053 v_dialer\dialer\src\core\install_ext.c Unable to insert extension
E29054 v_dialer\dialer\src\core\install_ext.c Entered a duplicate value
E29055 v_dialer\dialer\src\core\install_ext.c Error getting current pointer
E29056 v_dialer\dialer\src\core\api_jobctl.c No operator to monitor
E29057 v_dialer\dialer\src\core\api_jobctl.c Jobmon: Release code %d has count of %d
E29150 v_dialer\dialer\src\core\beeper.c %s:failed to %s
E29151 v_dialer\dialer\src\core\beeper.c Failed to initialize signals
E29152 v_dialer\dialer\src\core\beeper.c Failed to set SIGALRM handler
E29153 v_dialer\dialer\src\core\beeper.c BEEPER:unknown message %s
E29154 v_dialer\dialer\src\core\beeper.c Beeper - INTERVAL_ZIPTONE is not set in master.cfg
E29200 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\conn_mgr.cv_dialer\dialer\src\core\agent_tdss_util.c
%s - Failed to send msg[%s] on channel %d
E29201 %s - Failed to %s data segment
E29202 %s - Failed to %s unit segment
326 Maintenance and Troubleshooting Guide March 2008
E29203 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\beeper.cv_dialer\dialer\src\core\caller.cv_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\operator.cv_dialer\ivr\src\ivr_config.cv_dialer\ivr\src\ivr_conn.cv_dialer\dialer\src\utility\mem_dump.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\src\core\porter.cv_dialer\dialer\src\core\recall_rmp.cv_dialer\dialer\src\utility\shmon.c
%s - Failed to attach data segment
E29204 v_dialer\dialer\src\core\conn_mgr.c %s - Failed to create data segment
E29205 v_dialer\dialer\src\core\listops.c %s - Failed to create unit segment
E29206 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\operator.c
%s - Failed to attach unit segment
E29207 v_dialer\dialer\src\core\screen.c Invalid number entered
E29208 v_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\joblib.cv_dialer\dialer\src\core\driver.cv_dialer\dialer\src\core\msg_loader.c
%s - Failed to open channel %d
E29210 v_dialer\dialer\src\core\msg_loader.c %s - Failed to erase voice message %s
E29212 v_dialer\dialer\src\core\msg_loader.c %s - Failed to erase all messages
E29213 v_dialer\dialer\src\core\msg_loader.cv_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
%s - MSGNO parameter too big
E29214 v_dialer\dialer\src\core\msg_loader.cv_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
%s - Too many messages to load
E29400 v_dialer\dialer\src\core\testmsg.c Unable to find base file for %s
Maintenance and Troubleshooting Guide March 2008 327
E29500 v_dialer\dialer\src\core\ao_recall.c ao_recall: failed to send %s
E29501 v_dialer\dialer\src\core\ao_recall.c ao_recall: callsel for %s failed
E29502 dialer/src/core/ao_recall.c ao_recall - cannot retrieve selection file from '%s'
E29503 dialer/src/core/ao_recall.c ao_recall - no strategy file in selection file '%s'
E29505 dialer/src/core/ao_recall.c Error queuing timeout data in add_timeout
E29600 Unable to attach to data segment
E29601 HUNTGRP set incorrectly
E29602 Login code not defined for line %s
E29603 Could not open channel #%d
E29604 No login dial tone on line #%d
E29605 No dial tone on line #%d
E29606 Unable to dial %s
E29607 Error with line %d
E29608 ACD_login : Signal Abort:%s(%d)
E29700 v_dialer\dialer\src\core\joblist_ed.c Invalid Selection Number
E29701 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
Unable to open %s for reading
E29702 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
Unable to open %s for writing
E29703 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
Unable to load job file for agent %s
E29704 v_dialer\dialer\src\core\ld_joblist.c Unable to read header in job file for agent %s
E29705 v_dialer\dialer\src\core\ld_joblist.c Unable to read job list in job file for agent %s
E29706 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
Unable to write header in job file for agent %s
328 Maintenance and Troubleshooting Guide March 2008
E29707 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
Unable to write job list in job file for agent %s
E29708 v_dialer\dialer\src\core\operator.c Job not valid for agent
E29709 v_dialer\dialer\src\core\joblist_ed.c Agent job list feature not activated
E29710 v_dialer\dialer\src\core\ld_joblist.c Invalid line (%s) in agentjobs.raw; skipping
E29711 v_dialer\dialer\src\core\ld_joblist.c Invalid header in job file for agent %s; will recreate
E29712 v_dialer\dialer\src\core\ld_joblist.c Job name for agent %s too long; will truncate to %d characters
E29714 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
Unable to load job file for job chain %s
E29715 v_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
Unable to write header in job file for job chain %s
E29716 v_dialer\dialer\src\core\joblist_ed.c Unable to write job list in job file for job chain %s
E29717 v_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
Unable to read header in job file for job chain %s
E29718 v_dialer\dialer\src\core\ld_joblist.c Invalid header in job file for job chain %s; will recreate
E29719 v_dialer\dialer\src\core\job_strter.cv_dialer\dialer\src\core\ld_joblist.cv_dialer\dialer\src\core\joblist_ed.c
Unable to read job list in job file for job chain %s
E29800 v_dialer\dialer\src\core\chainhandler.c Job Chain %s does not exist
E29900 v_dialer\dialer\src\core\job_strter.c Unable to start next job %s
E29901 v_dialer\dialer\src\core\job_strter.c %s - Chain %s already started.
E29902 v_dialer\dialer\src\core\job_strter.c %s - Max number of chains already started.
E29903 v_dialer\dialer\src\core\job_strter.c Unable to start job %s
E29904 v_dialer\dialer\src\core\job_strter.c Unable to stop job %s
Maintenance and Troubleshooting Guide March 2008 329
E29950 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\agent_tdss_util.cv_dialer\dialer\src\core\screen.c
Feature not available in Softdialer Mode
E29951 v_dialer\dialer\src\core\port_hndle.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Specified more than %d line groups for use on job
E30000 IVR: -- The IVR_REC_LEN is not defined
E30001 IVR: -- The IVR_HEADER is not defined
E30002 IVR: -- The signal call failed - SIGUSR1
E30003 IVR: -- Cannot open the IVR read port
E30004 IVR: -- Cannot open the output file 1.
E30005 IVR: -- Problem with read from tty port
E30006 IVR: -- Received 15 bad IVR records1
E30007 IVR: -- Problem writing to output file
E30008 IVR: -- The signal call failed.
E30009 IVR: -- SIGUSR Cannot open output file 2.
E30010 IVR: -- SIGUSR Cannot open output file 1.
E30011 IVR: -- The IVR_TIME_INTVAL is not defined
E30012 IVR: -- The IVR_NUM_PORTS is not defined
E30013 IVR: -- Could not exec the process for child
E30014 IVR: -- Could not fork the child
E30015 IVR: SYSTEM call for ivr_mk_clist did not return 0
330 Maintenance and Troubleshooting Guide March 2008
E30016 IVR: Could not re-exec the process for child
E30017 IVR: Tried to restart the child 15 times unsuccessfully
E30018 IVR -- SEVERE ERROR, IVR_DAEMON HAS DIED.
E30019 IVR: -- System call did not return 0
E31200 v_dialer\dialer\src\custom\readwrt.c Null character specified as fill not allowed
E31400 v_dialer\dialer\src\custom\atohex.c Not a valid hexadecimal
E32000 v_dialer\dialer\src\dbconst\readtape.c %s - No backup list file given
E32001 v_dialer\dialer\src\dbconst\readtape.c %s - File dictionary name missing
E32002 v_dialer\dialer\src\dbconst\readtape.c %s - Calling list or file dictionary name missing
E32003 v_dialer\dialer\src\dbconst\readtape.c %s - One or both merge file names missing
E32004 v_dialer\dialer\src\dbconst\readtape.c %s - Warning: Reached record limit, additional data not converted
E32005 v_dialer\dialer\src\dbconst\readtape.c %s - Invalid calling list name
E32005 v_dialer\dialer\src\dbconst\readtape.c %s - Mismatch in calling lists
E32006 v_dialer\dialer\src\dbconst\readtape.c %s - Invalid tape record size
E32007 v_dialer\dialer\src\dbconst\readtape.c %s - Invalid switch year parameter (%d), using default of 70
E32008 v_dialer\dialer\src\dbconst\readtape.c %s - Rewind failed
E32400 v_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
%s - System OS ID error
E32401 v_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
%s - Backup device name(s) missing
E32402 v_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
%s - Calling list name missing
E32403 v_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
%s - Dictionary or configuration file missing
Maintenance and Troubleshooting Guide March 2008 331
E32404 v_dialer\dialer\src\dbconst\readtape.cv_dialer\dialer\src\dbconst\writetape.c
%s - Bad tape device name: %s
E32405 v_dialer\dialer\src\dbconst\readtape.c %s - No backup list file given
E32600 v_dialer\dialer\src\dbconst\moj_conv.cv_dialer\dialer\DialerCmdCtrl\VoicemsgCfgTable.cpp
%s - Failed to execute program '%s' successfully.
E32601 Wrong hexadecimal value specified with -a option
E32602 v_dialer\dialer\src\dbconst\moj_conv.c CHARSET parameter in .conf file must be set to 'ASCII', with moj_conv program.
E32603 v_dialer\dialer\src\dbconst\moj_conv.c CHARCASE parameter in .conf file must be set to 'UPLOW', with moj_conv program.
E32604 v_dialer\dialer\src\dbconst\moj_conv.c TAPEDEV parameter in .conf file must not be the device in /dev directory.
E32605 v_dialer\dialer\src\dbconst\moj_conv.c BLKSIZE parameter and RESIZE parameter are inconsistent.
E32606 Cannot read Japanese code control file %s
E32607 v_dialer\dialer\src\dbconst\moj_conv.c No DBCS conversion table name in the code control file.
E34000 v_dialer\dialer\src\lettergen\formlet.c formlet - Error reading record: %s
E34001 v_dialer\dialer\src\lettergen\formlet.c Criteria error: %s
E35000 v_dialer\dialer\src\lstextract\ext_data.c ext_data - Failed to insert new Calling List header info %s
E35001 v_dialer\dialer\src\lstextract\ext_data.c ext_data - Invalid new calling list name
E35002 v_dialer\dialer\src\lstextract\ext_data.c ext_data - Unable to append - calling list fdicts differ
E35200 v_dialer\dialer\src\lstextract\ext_list.c ext_list - Invalid new calling list name
E35201 v_dialer\dialer\src\lstextract\ext_list.c ext_list - Failed to read file dictionary %s
332 Maintenance and Troubleshooting Guide March 2008
E36000 v_dialer\dialer\src\dbmaint\record_ed.c Record_ed: Mark field '%s' not defined for list '%s'
E36001 v_dialer\dialer\src\dbmaint\record_ed.c Invalid record number %s
E36002 v_dialer\dialer\src\dbmaint\record_ed.c Failed to find record number %d
E36003 v_dialer\dialer\src\dbmaint\record_ed.c Failed to determine HASH field %s
E36004 v_dialer\dialer\src\dbmaint\record_ed.c Failed to find select field %s
E36005 v_dialer\dialer\src\dbmaint\record_ed.c Failed to find record number %d
E36006 v_dialer\dialer\src\dbmaint\redit_scrn.c Record_ed - Could not save Record %d, Value=%s in List %s
E36101 v_dialer\dialer\src\dbmaint\rec_update.c Rec_update - Child process %s terminated
E36200 v_dialer\dialer\src\dbmaint\redit_scrn.c Pattern error in field %d
E36201 v_dialer\dialer\src\core\dnc_mark.c Hash file '%s' (%s) is older than calling list '%s' (%s), please run clhash again.
E36202 v_dialer\dialer\src\core\dnc_mark.c Hash key field length %d does not match calling list field length %d
E36203 Source calling list of hash file %s does not match current calling list %s
E37000 v_dialer\admin\src\createop.c Error - Failed to load security files
E37001 v_dialer\admin\src\createop.c Invalid Name
E37002 v_dialer\admin\src\createop.c Name already exists or invalid name
E37003 v_dialer\admin\src\createop.c Invalid character in Name
E37004 v_dialer\admin\src\createop.c A password must be entered:ERROR
E37005 v_dialer\admin\src\createop.c Login Group is Not Valid
E37006 v_dialer\admin\src\createop.c ERROR: exceeded valid number of user entries[%d].:Invalid,%s:%s:%s:%s
Maintenance and Troubleshooting Guide March 2008 333
E37007 Createop:%s:Discard:%s:
E37008 v_dialer\admin\src\createop.c Invalid Name:Duplicate account
E37009 Name already exists:Failed to add account
E37010 v_dialer\admin\src\createop.cv_dialer\ivr\src\ivr_config.c
File is locked by another supervisor, try later!
E37011 v_dialer\admin\src\createop.cv_dialer\ivr\src\ivr_config.c
Unknown error, try later!
E37012 v_dialer\admin\src\createop.c No group information is loaded--%s
E37013 v_dialer\admin\src\createop.c Fail to read createop.cfg file
E37014 v_dialer\admin\src\createop.c Current user is not authorized
E37015 v_dialer\admin\src\createop.c Validate group information failed
E37016 v_dialer\admin\src\createop.c Invalid old password, Cannot add %s
E37017 v_dialer\admin\src\createop.c Error, cannot add %s
E37018 v_dialer\admin\src\createop.c Invalid or duplicate user %s
E37019 v_dialer\admin\src\createop.c Fail to add to ftpusers-> %s
E37020 v_dialer\admin\src\createop.c Invalid user name length: %s
E37021 v_dialer\admin\src\createop.c Cannot change owner of %s to admin
E37022 v_dialer\admin\src\createop.c Invalid sub-group found in sub-group string %s of group.pds file
E37023 v_dialer\admin\src\createop.cv_dialer\ivr\src\ivr_config.c
Could not setuid(), error = %d
E37024 v_dialer\admin\src\createop.cv_dialer\ivr\src\ivr_config.c
Could not setgid(), error = %d
E37025 v_dialer\admin\src\createop.c Have to supply both password file and vllogin or group file
E37026 v_dialer\admin\src\createop.c Fail to getpwnam(%s)
E37027 v_dialer\admin\src\createop.c alter_entry: Fail to do lckpwdf()
334 Maintenance and Troubleshooting Guide March 2008
E37028 v_dialer\admin\src\createop.c %s not found in vllogin
E37029 v_dialer\admin\src\createop.c Fail to enforce new password for %s
E37030 v_dialer\admin\src\createop.c DEL_REC: Fail to delete %s
E37031 v_dialer\admin\src\createop.c EDIT_REC: Fail to modify account %s
E37032 v_dialer\admin\src\createop.c Account not found: %s
E37033 Fail to link correct profile for %s
E37034 v_dialer\admin\src\createop.c Fail to add user %s
E37035 v_dialer\admin\src\createop.c Missing Password or Menu fields: %s:%s:%s:%s
E37036 v_dialer\admin\src\createop.c %s not found in group file
E37037 v_dialer\admin\src\createop.c WARNING: Reached limit of MAX_USERS (%d) as set in createop.cfg file
E37038 v_dialer\admin\src\createop.c ERROR: Reached limit of MAX_USERS (%d) as set in createop.cfg file
E37039 Error - Failed to load existing user IDs
E37200 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Invalid Expert Calling Ratio
E37201 v_dialer\dialer\src\editor\config_ed.c Field '%s' not filled in
E37202 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
No Inbound jobs allowed on this system.
E37203 Number of reserved inbound lines must be from 1 to %s
E37204 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Invalid call completion code specified
E37205 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Invalid start or stop time format
E37206 Invalid Hit Rate
Maintenance and Troubleshooting Guide March 2008 335
E37207 Invalid paired phone count/type
E37208 v_dialer\dialer\src\editor\config_ed.c HUNTGRP: format error
E37209 No HUNTGRP setting.
E37210 Selection list not available for use
E37211 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Selection list for job not found
E37212 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
No Verification Selection List Ready for Job
E37213 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Selection list not created with this Calling List
E37214 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Number of telephone lines must be from 1 to 96
E37215 An odd number of telephone lines is not allowed
E37216 Quota Value less than one
E37217 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
HUNTGRP: format error
E37218 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
There must be a script label for answer specified
E37219 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Invalid call completion code for Quota Value %d
E37220 v_dialer\dialer\src\editor\config_ed.c Quota %d is not OP completion code
E37221 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
%s field missing from %s
E37222 v_dialer\dialer\src\editor\config_ed.c Creation date/time error: %s
E37223 v_dialer\dialer\src\editor\config_ed.c Data Transfer file %s.axfr: %s not in %s
336 Maintenance and Troubleshooting Guide March 2008
E37224 v_dialer\dialer\src\editor\config_ed.c Wrong job for verification editor
E37225 v_dialer\dialer\src\editor\config_ed.c No editable line found in file: %s
E37226 v_dialer\dialer\src\editor\config_ed.c Failed to create link list header
E37227 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
ERROR: Job %s is already running
E37228 ERROR: Job file %s already in use
E37229 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Failed to find linked job file: %s
E37230 Managed dialing job linking is not permitted
E37231 v_dialer\dialer\src\editor\config_ed.c Sales verification job linking is not permitted
E37232 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Job linking is not permitted
E37233 v_dialer\dialer\src\editor\config_ed.c %s - Unable to start job %s
E37234 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Failed to find Inbound Job Screen: %s
E37235 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Failed to find Inbound Job Map: %s
E37236 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Failed to read Inbound List: %s
E37237 v_dialer\dialer\src\editor\config_ed.c Failed to find MSCRN - Job screen: %s
E37238 v_dialer\dialer\src\editor\config_ed.c Failed to find MSCRN - Job map: %s
E37239 v_dialer\dialer\src\editor\config_ed.c Number of multi screens does not match number of multi lists
E37240 v_dialer\dialer\src\editor\config_ed.c Failed to find ASCRN - Job screen: %s
Maintenance and Troubleshooting Guide March 2008 337
E37241 v_dialer\dialer\src\editor\config_ed.c Failed to find MSCRN - Job map: %s
E37242 v_dialer\dialer\src\editor\config_ed.c Failed to read Assoc List: %s
E37243 v_dialer\dialer\src\editor\config_ed.c Number of associate screens does not match number of associate lists
E37244 v_dialer\dialer\src\editor\config_ed.c Number of edit fields does not match number of associate lists
E37245 v_dialer\dialer\src\editor\config_ed.c %s - %s(err_code=%d)
E37246 v_dialer\dialer\src\editor\config_ed.c %s(err_code=%d)
E37247 v_dialer\dialer\src\editor\config_ed.c Unable to clear %s
E37248 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Line type specified already in use
E37249 v_dialer\dialer\src\editor\config_ed.c Improper usage
E37250 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
There must be a script label for call specified
E37251 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Initial Hit Rate out of range (1-100)
E37252 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Failed to open script file for IVR ID %s
E37253 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
IVR script name not specified; required if IVR ID specified
E37254 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Unable to find %s in script file for IVR ID %s
E37255 Calling list %s is not on local dialer.
E37256 v_dialer\dialer\src\editor\config_ed.c Selecting unit to log in to is not permitted with inbound-only job
E37300 v_dialer\admin\src\termprocess.c %s: Invalid process ID %d
E37301 v_dialer\admin\src\termprocess.c termprocess:fail to send signal message %s
338 Maintenance and Troubleshooting Guide March 2008
E37400 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Failed to find %s: %s
E37401 Failed to save %s file: %s
E37402 v_dialer\dialer\src\editor\config_ed.c Failed to allocate %s
E37403 v_dialer\dialer\src\editor\config_ed.c Failed to read %s: %s
E37404 v_dialer\dialer\src\editor\config_ed.c Number of %s do not match number of %s
E37405 v_dialer\dialer\src\editor\config_ed.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
%s field missing or incorrect length
E37500 v_dialer\admin\src\signalit.c Fail to terminate process %d, errno %d
E37501 v_dialer\admin\src\signalit.c Fail to kill process %d, errno %d
E37502 v_dialer\admin\src\signalit.c Fail to send SIGUSR1 process %d, errno %d
E37503 v_dialer\admin\src\signalit.c Fail to setreuid to (-1, 0)
E37600 v_dialer\dialer\src\utility\agentcount.c Field #%d not filled in
E37601 v_dialer\dialer\src\editor\master_ed.c No editable line found in file: %s
E37602 v_dialer\dialer\src\editor\master_ed.c Failed to create link list header
E37603 v_dialer\dialer\src\editor\master_ed.c ERROR: %s already in use
E37604 v_dialer\dialer\src\editor\master_ed.c Unable to clear %s
E37800 v_dialer\dialer\src\editor\master_ed.c Groupname %s has invalid length
E37801 Skeleton path %s for group %s does not exist
E37802 v_dialer\admin\src\addgroup.c Could not add group %s
E38000 v_dialer\dialer\src\markrec\chkentdt.c Chkentdt - Failed to create old database index
E38001 Chkentdt - Failed to create new database index
Maintenance and Troubleshooting Guide March 2008 339
E38002 v_dialer\dialer\src\markrec\chkentdt.c Chkentdt WARNING - cannot open old database %s. Assuming none exists
E38003 v_dialer\dialer\src\markrec\chkentdt.c Chkentdt ERROR:-S option must be used with -i option
E38004 v_dialer\dialer\src\markrec\chkentdt.c Chkentdt - Unable to malloc hash_table
E38400 v_dialer\dialer\src\markrec\latemrk.c Latemrk - Failed to create calling list index
E38401 Latemrk - Failed to create late list index
E38402 v_dialer\dialer\src\markrec\latemrk.c Latemrk - file error building late list
E38403 v_dialer\dialer\src\markrec\latemrk.c Latemrk - field_list - key fields not the same length
E38404 v_dialer\dialer\src\markrec\latemrk.c Latemrk - %s recno %d locked; skipping;
E38405 v_dialer\dialer\src\markrec\latemrk.c Latemrk - %s '%s' not found in %s, skipping;
E38406 v_dialer\dialer\src\markrec\latemrk.c Latemrk - Field '%s' not found in %s
E38600 v_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\markrec\set_field.c
%s - Failed to read record: %s
E38601 v_dialer\dialer\src\markrec\set_field.c %s - Failed to update record: %s
E38602 v_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\markrec\set_field.c
%s - Failed to create calling list search index
E38603 v_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\markrec\set_field.c
%s - %s '%s' not found in %s.
E38604 v_dialer\dialer\src\markrec\get_field.cv_dialer\dialer\src\markrec\set_field.c
%s - Valid record range is 1 - %d.
E38605 v_dialer\dialer\src\markrec\get_field.c %s - No records in calling list
E38800 v_dialer\dialer\src\markrec\latelst.c %s - key fields not the same length
E38801 %s - Key '%s' not found in hash file
340 Maintenance and Troubleshooting Guide March 2008
E38802 %s - Error allocating memory for '%s'
E39000 Failed to find user logon entry %s in V/L login file
E39001 v_dialer\dialer\src\menu\menu.c Error _ No Menu Name
E39002 v_dialer\dialer\src\menu\menu.c Help File Not Found: %s
E39003 v_dialer\dialer\src\menu\menu.c Menu File Not Found: %s
E39004 v_dialer\dialer\src\menu\menu.c MENU(%d)Signal Interrupt=%d
E39005 v_dialer\dialer\src\menu\menu.c %s - User not authorized to run this menu - %s
E39200 v_dialer\dialer\src\menu\submenu.c Incorrect Item Number
E39201 v_dialer\dialer\src\menu\submenu.c Failed to Search Directory for File Extension: %s
E39202 v_dialer\dialer\src\menu\submenu.c Invalid list number
E40000 v_dialer\dialer\src\pcextract\brkfile.c No Calling Statistics Files Available
E40001 v_dialer\dialer\src\pcextract\brkfile.c PC Analysis - Reopen of %s failed
E40002 v_dialer\dialer\src\pcextract\fileops.c PC Analysis - Invalid File Type of %c
E40003 v_dialer\dialer\src\pcextract\brkfile.c No Agent Files Available
E40200 v_dialer\dialer\src\pcextract\fileops.c Pc Analysis - Unknown Type %c for Input File type
E40201 v_dialer\dialer\src\pcextract\fileops.c File Name not Found
E40202 v_dialer\dialer\src\pcextract\fileops.c File does not Exist
E40203 v_dialer\dialer\src\pcextract\fileops.c In Help mode, Cannot Select Criteria
E40204 v_dialer\dialer\src\pcextract\fileops.c Invalid Field Order Select Number
E40400 v_dialer\dialer\src\pcextract\msetup.c %s - Invalid config file name
E40401 v_dialer\dialer\src\pcextract\msetup.c Invalid Extraction Type
E42000 v_dialer\dialer\src\preprocess\de_reject.c
-S option must be used with -i option
Maintenance and Troubleshooting Guide March 2008 341
E42100 v_dialer\dialer\src\preprocess\ij_merge.c
-S option must be used with -i option
E42101 v_dialer\dialer\src\preprocess\ij_merge.c
Third argument must be -c
E42400 v_dialer\dialer\src\preprocess\clhashin.c %s - Failed hash open of %s
E42401 %s - Failed to stat associated calling list %s
E42402 v_dialer\dialer\src\preprocess\clhashin.c %s - %s : %s
E42403 v_dialer\dialer\src\preprocess\clhashin.c %s - Associate list and hash index date/time do not agree for %s. Run clhash
E42404 v_dialer\dialer\src\preprocess\clhashin.c %s - Field %s length %d not match hash key %s length %d
E42405 v_dialer\dialer\src\preprocess\clhashin.c Record number %s too big for field %s
E42406 v_dialer\dialer\src\preprocess\clhashin.c %s - Record number %s too big for field %s
E42600 Field undefined in the calling list
E42601 Gap found between field names within group
E42602 Missing assigned field values
E42603 Gap found in value selections
E42604 Field value has an invalid character
E42605 Missing Range or Item specification in field values
E42606 Values not in ascending order
E42607 No fields selected for reporting
E42608 Miss value in filler criteria
E42609 Miss field name in filler criteria
E42610 Pattern Error: %s
E42611 'ALL' cannot co-exist with other selections
E42612 Unknown call completion code
342 Maintenance and Troubleshooting Guide March 2008
E42613 %s - Unknown select file %s
E42614 %s - Unknown supplement file %s
E42615 Invalid code. Type R for row, C for column or T for table.
E42616 Invalid line number
E42617 Cannot move to same location
E42800 Invalid number indicator: %s
E42801 v_dialer\dialer\src\preprocess\setzones.c
-S option must be used with -i option
E43000 v_dialer\dialer\src\preprocess\update_cl.c
%s - Match field %s length %d not match associated field %s length %d
E43001 v_dialer\dialer\src\preprocess\update_cl.c
Record %d - Bad Record number in field %s
E43002 v_dialer\dialer\src\preprocess\update_cl.c
%s - Record %d - Assoc list %s read error(%d) for record no. %d
E43200 Record %d - Too many records in set
E43201 %s - Record %d - Too many records in set
E43400 v_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
TERMINAL ERROR
E43401 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
Record %d - READ ERROR (%d)
E43402 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
Record %d - WRITE ERROR (%d)
Maintenance and Troubleshooting Guide March 2008 343
E43403 v_dialer\dialer\src\preprocess\update_upl.c
Record %d - HASH ERROR (%d)
E43404 v_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\update_upl.c
%s - Failed hash initialization!
E43405 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
%s - Failed to stat calling list %s
E43406 v_dialer\dialer\src\preprocess\clhashin.cv_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
%s - Record %d - READ ERROR (%d)
E43407 v_dialer\dialer\src\preprocess\clhash.cv_dialer\dialer\src\preprocess\update_upl.c
%s - Record %d - HASH ERROR (%d)
E43408 v_dialer\dialer\src\preprocess\update_cl.cv_dialer\dialer\src\preprocess\update_upl.c
%s - Record %d - WRITE ERROR (%d)
E43500 v_dialer\dialer\src\preprocess\msgmap.c
Calling List %s open error
E43501 v_dialer\dialer\src\preprocess\msgmap.c
Calling List %s header error
E43502 v_dialer\dialer\src\preprocess\msgmap.c
Calling List %s definition error
E43503 v_dialer\dialer\src\preprocess\msgmap.c
Field name %s missing in Calling List %s
E43504 v_dialer\dialer\src\preprocess\msgmap.c
Error initializing LISTS hash file %s
E43505 v_dialer\dialer\src\preprocess\msgmap.c
Error hashing record %d in Calling List %s. Errcode = %d
E43506 v_dialer\dialer\src\preprocess\msgmap.c
Error writing hash record %d in hash file %s. Errcode = %d
E43507 v_dialer\dialer\src\preprocess\msgmap.c
System_value %d too big. Limit is MAXMSGS
E43508 Record %d - READ ERROR
344 Maintenance and Troubleshooting Guide March 2008
E43509 v_dialer\dialer\src\preprocess\msgmap.c
Record %d - WRITE ERROR
E43510 v_dialer\dialer\src\preprocess\msgmap.c
Record %d - CALLING LIST BUFFER MALLOC ERROR
E43511 v_dialer\dialer\src\preprocess\msgmap.c
Error: colon missing on line %s:%s
E43512 dialer\src\preprocess\msgmap.c %s:%s, Field name %s missing in Calling List %s
E44000 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - Bad arguments
E44001 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - Memory allocation error
E44002 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - File access error
E44003 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - Equation syntax error
E44004 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - Invalid format code
E44005 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - Report configuration error
E44006 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - No HISTORY variable in master.cfg
E44007 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - History dictionary error
E44008 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - Incorrect sort field name
E44009 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - Failed to open report format file
E44010 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - Failed to write output report file
E44011 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - No record selection criteria given
E44012 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - Failed to open input file
E44013 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - Failed to set/reset record lock
E44014 v_dialer\dialer\src\reports\history\hist_rpt.c
%s - job and report format type are not compatible
Maintenance and Troubleshooting Guide March 2008 345
E45000 rpt_view - Caught signal %d and terminated
E45001 v_dialer\dialer\src\reports\rpt_mgr\rpt_view.c
Incorrect Report Number
E45200 File name for view missing
E45201 pds_view - Caught signal %d and terminated
E45202 v_dialer\dialer\src\reports\rpt_mgr\pds_view.c
REPORT %s NOT FOUND
E46200 v_dialer\dialer\src\reports\reportgen\reportexp.cv_dialer\dialer\src\reports\reportgen\reportsub.c
Invalid line number
E46201 v_dialer\dialer\src\reports\reportgen\reportexp.c
Exceeded maximum number of expressions
E46202 v_dialer\dialer\src\reports\reportgen\reportexp.c
Invalid PAGE flag
E46203 v_dialer\dialer\src\reports\reportgen\reportexp.c
Invalid RESET flag
E46204 v_dialer\dialer\src\reports\reportgen\reportexp.c
Missing expression name
E46205 v_dialer\dialer\src\reports\reportgen\reportexp.c
Unknown operator: %s
E46206 v_dialer\dialer\src\reports\reportgen\reportexp.c
Missing operator
E46207 v_dialer\dialer\src\reports\reportgen\reportexp.c
Too many operands for operator '%s'
E46208 v_dialer\dialer\src\reports\reportgen\reportexp.c
Missing operand for operator '%s'
E46209 v_dialer\dialer\src\reports\reportgen\reportexp.c
%s is undefined in the printcap file
E46210 v_dialer\dialer\src\reports\reportgen\reportexp.cv_dialer\dialer\src\reports\reportgen\reportsub.cv_dialer\dialer\src\reports\reportgen\reportsel.cv_dialer\dialer\src\reports\reportgen\reportprn.c
%s is undefined in the dictionary
346 Maintenance and Troubleshooting Guide March 2008
E46211 v_dialer\dialer\src\reports\reportgen\reportexp.c
Unknown variable name %s
E46212 v_dialer\dialer\src\reports\reportgen\reportexp.c
Unmatching ' in literal string %s
E46213 v_dialer\dialer\src\reports\reportgen\reportexp.c
Unknown data type: %s
E46214 v_dialer\dialer\src\reports\reportgen\reportexp.c
Invalid data type for operator %s
E46400 v_dialer\dialer\src\reports\reportgen\reportfmt.c
No expression located at cursor position
E46401 v_dialer\dialer\src\reports\reportgen\reportfmt.c
Insufficient memory for screen buffer allocation
E46402 v_dialer\dialer\src\reports\reportgen\reportfmt.c
End of file reached
E46403 v_dialer\dialer\src\reports\reportgen\reportfmt.c
No lines in buffer
E46404 v_dialer\dialer\src\reports\reportgen\reportfmt.c
Invalid starting location - expression overlap
E46405 v_dialer\dialer\src\reports\reportgen\reportfmt.c
Invalid ending location - expression overlap
E46406 v_dialer\dialer\src\reports\reportgen\reportfmt.c
Must specify start location
E46407 v_dialer\dialer\src\reports\reportgen\reportfmt.c
Invalid ending location
E46408 v_dialer\dialer\src\reports\reportgen\reportfmt.c
Exceeded maximum report dimensions
E46409 v_dialer\dialer\src\reports\reportgen\reportfmt.c
Failed to open format temp file
E46410 v_dialer\dialer\src\reports\reportgen\reportfmt.c
Invalid line marker at line %d
E46411 v_dialer\dialer\src\reports\reportgen\reportfmt.c
Invalid starting location
E46412 v_dialer\dialer\src\reports\reportgen\reportfmt.c
Invalid ending location
E46600 v_dialer\dialer\src\reports\reportgen\reporthlp.c
No entries in printcap file
E46601 v_dialer\dialer\src\reports\reportgen\reporthlp.c
No entries in file dictionary
Maintenance and Troubleshooting Guide March 2008 347
E46602 v_dialer\dialer\src\reports\reportgen\reporthlp.c
No expressions defined in file
E46603 v_dialer\dialer\src\reports\reportgen\reportinit.c
Failed to open report list file
E46800 v_dialer\dialer\src\reports\reportgen\reportinit.c
Failed to list defined printer model names
E46801 v_dialer\dialer\src\reports\reportgen\reportinit.c
Failed to read printcap file
E46802 v_dialer\dialer\src\reports\reportgen\reportinit.c
Unknown printer model
E46803 v_dialer\dialer\src\reports\reportgen\reportinit.c
Report -
E46804 v_dialer\dialer\src\reports\reportgen\reportinit.c
Failed to get defn. for calling list
E46805 v_dialer\dialer\src\reports\reportgen\reportinit.c
File name missing
E46806 v_dialer\dialer\src\reports\reportgen\reportinit.c
Failed to open text substitution file
E46807 v_dialer\dialer\src\reports\rptgen\reportconvert.cv_dialer\dialer\src\reports\reportgen\reportinit.cv_dialer\dialer\src\reports\reportgen\reportconvert_prev.c
Report control file name too long
E46808 v_dialer\dialer\src\reports\rptgen\reportconvert.cv_dialer\dialer\src\reports\reportgen\reportinit.cv_dialer\dialer\src\reports\reportgen\reportconvert_prev.c
Failed to write report control file
E46809 v_dialer\dialer\src\reports\reportgen\reportinit.c
Failed to read report help file
E46810 v_dialer\dialer\src\reports\reportgen\reportinit.cv_dialer\dialer\src\reports\reportgen\reportconvert_prev.cv_dialer\dialer\src\reports\rptgen\reportconvert.c
Failed to open report control file: %s
348 Maintenance and Troubleshooting Guide March 2008
E46811 v_dialer\dialer\src\reports\reportgen\reportinit.cv_dialer\dialer\src\reports\reportgen\reportconvert_prev.cv_dialer\dialer\src\reports\rptgen\reportconvert.c
Unknown report control file: %s
E47000 Failed to initialize
E47001 v_dialer\dialer\src\scrnbld\scrnbld.c Failed to read command keys file
E47002 v_dialer\dialer\src\scrnbld\scrnbld.c Terminal Screen too small for screen editor.
E47003 v_dialer\dialer\src\scrnbld\scrnbld.c May not shift fields further
E47004 v_dialer\dialer\src\scrnbld\scrnbld.c Only Date, Time, or Numeric fields may have Verification Formats
E47005 v_dialer\dialer\src\scrnbld\scrnbld.c Field does not fit in screen.
E47006 v_dialer\dialer\src\scrnbld\scrnbld.c May not overlay screen labels.
E47007 v_dialer\dialer\src\scrnbld\scrnbld.c May not place fields in column one.
E47008 v_dialer\dialer\src\scrnbld\scrnbld.c May not overlap screen fields.
E47009 v_dialer\dialer\src\scrnbld\scrnbld.c May only edit lists [1..%d]
E47010 v_dialer\dialer\src\scrnbld\scrnbld.c %s(ScreenBuilder) - Failed to open output report file
E47011 May not change to the same file dictionary.
E47012 v_dialer\dialer\src\scrnbld\scrnbld.c No Jobs available
E47013 v_dialer\dialer\src\scrnbld\scrnbld.c No jobs use the current screen
E47014 v_dialer\dialer\src\scrnbld\scrnbld.c Screen does not exist:
E47015 v_dialer\dialer\src\scrnbld\scrnbld.c No changes made.
E47016 UNFINISHED COMMAND: TESTMODE
E47017 Invalid %s number specified=%d.
E47018 Cut & Paste Field Not %s
Maintenance and Troubleshooting Guide March 2008 349
E47019 v_dialer\dialer\src\scrnbld\sbld_block.c You may not PASTE over fields.
E47020 v_dialer\dialer\src\scrnbld\sbld_block.c Fields may not start in column one.
E47021 v_dialer\dialer\src\scrnbld\sbld_block.c Field in block does not fit on screen.
E47022 v_dialer\dialer\src\scrnbld\sbld_block.c Fields may not overlap.
E47023 v_dialer\dialer\src\scrnbld\sbld_block.c Block must fit on screen.
E47024 v_dialer\dialer\src\scrnbld\sbld_block.c Field[%s,%d] does not match dictionary.
E47025 v_dialer\dialer\src\scrnbld\scrnbld.c Not enough menu options
E47026 v_dialer\dialer\src\scrnbld\scrnbld.c ERROR: no screen open
E47027 v_dialer\dialer\src\scrnbld\scrnbld.c Failed to write screen file
E47028 v_dialer\dialer\src\scrnbld\scrnbld.c Save to a different name.
E47029 You may not %s the current edit screen.
E47030 v_dialer\dialer\src\scrnbld\scrnbld.c NO HELP TABLE
E47031 v_dialer\dialer\src\scrnbld\scrnbld.c Protected file.
E47032 v_dialer\dialer\src\scrnbld\scrnbld.c Use a different name.
E47033 v_dialer\dialer\src\scrnbld\scrnbld.c Invalid sequence number specified=%d.
E47034 v_dialer\dialer\src\scrnbld\scrnbld.c Invalid field number specified=%d.
E47035 v_dialer\dialer\src\scrnbld\sbld_block.c Cut & Paste Field Not Copied
E47036 v_dialer\dialer\src\scrnbld\sbld_block.c Cut & Paste Field Not Cut, or Copied
E47037 v_dialer\dialer\src\scrnbld\sbld_block.c Cut & Paste Field Not Cleared
E47038 v_dialer\dialer\src\scrnbld\scrnbld.c You may not delete the current edit screen.
E47039 v_dialer\dialer\src\scrnbld\scrnbld.c You may not recover the current edit screen.
E47040 v_dialer\dialer\src\scrnbld\scrnbld.c Failed to initialize Screen
E47041 Failed to initialize Keyboard
350 Maintenance and Troubleshooting Guide March 2008
E49001 dialer_library\libcpp\src\Passwd.cpp Password verification failed for user: %s, Exception: %s
E50000 v_dialer\dialer\src\utility\adump.c Data File Not in Calling List Format
E50100 v_dialer\dialer\src\utility\agentcheck.cv_dialer\dialer\src\core\agent_misc_util.c
Exceeded number of %s agents
E50101 v_dialer\dialer\src\utility\agentcheck.c Exceeded wait limit for acceptance
E50200 v_dialer\dialer\src\utility\datetime.c Invalid time format
E50201 v_dialer\dialer\src\utility\datetime.c Invalid hour in time
E50202 v_dialer\dialer\src\utility\datetime.c Invalid minutes in time
E50203 v_dialer\dialer\src\utility\datetime.c Invalid date format
E50204 v_dialer\dialer\src\utility\datetime.c Invalid year in date
E50205 v_dialer\dialer\src\utility\datetime.c Invalid month in date
E50206 v_dialer\dialer\src\utility\datetime.c Invalid day in date
E50600 v_dialer\dialer\src\utility\enq_pty.c No Headset ID Specified.
E50601 v_dialer\dialer\src\utility\enq_pty.c Failed to Initialize Keyboard
E50602 v_dialer\dialer\src\utility\enq_pty.c Failed to Initialize screen environment
E50603 v_dialer\dialer\src\utility\enq_pty.c Failed to create display window.
E50604 v_dialer\dialer\src\utility\enq_pty.c Not a pseudo-terminal port
E50605 v_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
No response from system, login failed
E50606 Headset ID (%d) Out of Range (1-%d)
E50607 Failed to select Headset ID(%d)
E50608 Exceeded retry limits, No valid headset ID specified
E50609 v_dialer\dialer\src\utility\enq_pty.c Exceeded retry limits, No valid key code specified
E50610 Headset ID (%d) Already in use by %s
Maintenance and Troubleshooting Guide March 2008 351
E50611 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\utility\enq_pty.c
Headset ID (%s) Already in use
E50612 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\utility\enq_pty.c
No more Headsets permitted on system
E50613 v_dialer\dialer\src\core\agent_hs_util.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\utility\enq_pty.c
Failure to access Headset Table
E50800 op_logout: failed to establish input queue for hs %s
E51001 v_dialer\dialer\src\utility\fdictdump.c Goodbye...
E51200 v_dialer\dialer\src\utility\jobkeys.c No information on keys for job %s
E51201 No such keys file defined named: %s
E51400 Port_start - Failed to get VOICEDIR directory
E51600 v_dialer\dialer\src\utility\portcorr.c No <###tran.stat> files are marked with todays date
E51601 v_dialer\dialer\src\utility\portcorr.c Cannot open file chi_data
E52800 v_dialer\dialer\src\utility\ziptoarea.c Only single zipcode field is allowed
E52801 v_dialer\dialer\src\utility\ziptoarea.c Exceeded area code fields limit of (%d)
E52802 v_dialer\dialer\src\utility\ziptoarea.c Illegal option -%c
E52803 v_dialer\dialer\src\utility\ziptoarea.c No main option specified
E52804 v_dialer\dialer\src\utility\ziptoarea.c '-f' option also require '-a' & '-z' option
E52805 v_dialer\dialer\src\utility\ziptoarea.c Bad pattern specified with '-x' option
E52806 v_dialer\dialer\src\utility\ziptoarea.c Area code offset can't exceed %d
E53000 v_dialer\dialer\src\utility\copyfields.c %s - Unable to open Calling List '%s'
352 Maintenance and Troubleshooting Guide March 2008
E53001 v_dialer\dialer\src\utility\copyfields.c %s - Unable to get List Definition for '%s'
E53002 v_dialer\dialer\src\utility\copyfields.c %s - Unable to stat Calling List '%s'
E53003 v_dialer\dialer\src\utility\copyfields.c %s - Unable to open Prepare Check file '%s'. Must run clhash first.
E53004 v_dialer\dialer\src\utility\copyfields.c %s - Unable to find correct entry for '%s' in Prepare Check file '%s'. Must run clhashin first.
E53005 v_dialer\dialer\src\utility\copyfields.c %s - Field '%s' not in Calling List '%s'
E53006 v_dialer\dialer\src\utility\copyfields.c %s - Unable to open Associated Calling List '%s'
E53007 v_dialer\dialer\src\utility\copyfields.c %s - Unable to stat Associate List '%s'
E53008 v_dialer\dialer\src\utility\copyfields.c %s - Field '%s' not in Associate Calling List '%s'
E53009 v_dialer\dialer\src\utility\copyfields.c %s - Match field '%s' length %d not same as associated field '%s' length %d!
E53010 v_dialer\dialer\src\utility\copyfields.c %d - READ ERROR (%d)
E53011 v_dialer\dialer\src\utility\copyfields.c %s - Record %d - READ ERROR (%d)
E53012 v_dialer\dialer\src\utility\copyfields.c %d - A READ ERR (%d)
E53013 v_dialer\dialer\src\utility\copyfields.c %s - Record %d - ASSOC READ ERROR (%d)
E53014 v_dialer\dialer\src\utility\copyfields.c %d - WRITE ERROR (%d)
E53015 v_dialer\dialer\src\utility\copyfields.c %s - Associate Record %d - WRITE ERROR (%d)
E53016 v_dialer\dialer\src\utility\copyfields.c %d BAD RECORDS
E53017 v_dialer\dialer\src\utility\copyfields.c %s - %d BAD RECORDS
E53018 %s - %d BAD RECORDS
E53019 v_dialer\dialer\src\utility\copyfields.c %s - Unable to open: %s
E53020 v_dialer\dialer\src\utility\copyfields.c %s - Unknown configuration file %s
Maintenance and Troubleshooting Guide March 2008 353
E53021 v_dialer\dialer\src\utility\copyfields.c %s - Unable to allocate list buffer
E53022 v_dialer\dialer\src\utility\copyfields.c TERMINAL ERROR
E53023 v_dialer\dialer\src\utility\copyfields.c %s - Usage error
E53650 v_dialer\dialer\src\imon\internetmon.c compcode.cfg not found
E53651 v_dialer\dialer\src\imon\internetmon.c INTERNETMONDIR parameter is missing from master.cfg
E53652 v_dialer\dialer\src\imon\internetmon.c Internet Monitor shutting down
E53654 v_dialer\dialer\src\imon\internetmon.c Internet Monitor failed to attach to shared memory - conn_mgr may not be running - exiting
E53655 HTML Page update failed - remote Web server may no longer be mounted
E53800 v_dialer\dialer\src\utility\evmon.c Caught error #%d!
E53801 v_dialer\dialer\src\utility\evmon.c Error %d writing msg '%s' to log file [%s].
E53802 v_dialer\dialer\src\utility\evmon.c Error: Unable to log system message. Message '%s' not found.
E53803 v_dialer\library\libdsi\src\script_lng.c Error: Couldn't open file '%s'
E53804 v_dialer\dialer\src\utility\evmon.c Error formatting message '%s'.
E53805 v_dialer\dialer\src\utility\evmon.c Error: Nothing to monitor!
E53806 v_dialer\dialer\src\utility\evmon.c Error: Unable to open log file %s for appending.
E53807 v_dialer\dialer\src\utility\evmon.c Error: Couldn't open log file [%s]
E53808 v_dialer\library\libdsi\src\script_lng.c Error: Bad date-time format: [%s]
E53809 v_dialer\dialer\src\utility\evmon.c Error: Unable to retrieve EVMON filespec from master.cfg
E53810 v_dialer\dialer\src\utility\evmon.c Error: Config file [%s] was not found.
E53811 v_dialer\dialer\src\utility\evmon.c Error: System call auditing is requested but system is not trusted
354 Maintenance and Troubleshooting Guide March 2008
E53812 Error: File %s was not found. Make sure system auditing is turned on.
E53813 v_dialer\dialer\src\utility\evmon.c Error: Couldn't stat [%s]
E53814 v_dialer\dialer\src\utility\evmon.c Warning: No 'next' audit log defined.
E53815 v_dialer\dialer\src\utility\evmon.c Error: Bad update interval value
E53816 v_dialer\dialer\src\utility\evmon.c Error: Unknown option %c
E53817 v_dialer\dialer\src\utility\evmon.c Error: Unknown/unimplemented entry in cfg file on line %d
E53818 v_dialer\dialer\src\utility\evmon.c Error: The HP-UX auditing system is OFF. Please use SAM to turn it on.
E53819 v_dialer\dialer\src\utility\evmon.c Error: Audctl failed: errno=%d
E54100 v_dialer\dialer\src\listserver\listserver.c Unexpected program exit
E54101 v_dialer\dialer\src\listserver\listserver.c getservbyname ('%s', tcp) failed
E54102 v_dialer\dialer\src\listserver\listserver.c socket () failed
E54103 v_dialer\dialer\src\listserver\listserver.c bind (fd=%d) failed (are clients still connected to sockets of previous listserver instance?)
E54104 v_dialer\dialer\src\listserver\listserver.c listen (fd=%d) failed
E54105 v_dialer\dialer\src\listserver\listserver.c setsockoopt (fd=%d, SO_LINGER) failed
E54106 v_dialer\dialer\src\listserver\listserver.c setsockoopt (fd=%d, SO_KEEPALIVE) failed
E54107 v_dialer\dialer\src\listserver\listserver.c accept (fd=%d) failed
E54108 Usage error
E54109 v_dialer\dialer\src\listserver\listserver.c Received signal %d -- exiting
E54110 v_dialer\dialer\src\listserver\listserver.c FD_ISSET (conn_fd=%d) failed
E54111 v_dialer\dialer\src\listserver\listserver.c Write error -- exiting
E54112 v_dialer\library\libdsi\src\clutils.c Read error -- exiting
E54113 v_dialer\dialer\src\listserver\listserver.c File descriptor too large (fd=%d) -- exiting
Maintenance and Troubleshooting Guide March 2008 355
E54114 v_dialer\dialer\src\listserver\listserver.c cllstat (fd=%d) failed -- exiting
E54115 v_dialer\dialer\src\listserver\listserver.c cllrddict (fd=%d) failed -- exiting
E54120 v_dialer\dialer\src\listserver\listserver.cv_dialer\dialer\DialerCmdCtrl\VoicemsgCfgTable.cpp
fork failed -- errno=%d '%s'
E54121 v_dialer\dialer\src\listserver\listserver.c Unable to open list '%s'
E55000 v_dialer\dialer\src\reports\reportgen\reportprn.c
Insufficient memory for %s
E55001 v_dialer\dialer\src\reports\reportgen\reportprn.c
Error reading records
E55002 v_dialer\dialer\src\reports\reportgen\reportprn.c
Failed to open report output file
E55200 v_dialer\dialer\src\reports\reportgen\reportsel.c
Group may not begin with no criteria
E55201 v_dialer\dialer\src\reports\reportgen\reportsel.c
Gap found between select fields
E55202 v_dialer\dialer\src\reports\reportgen\reportsel.c
Invalid logical connector
E55203 v_dialer\dialer\src\reports\reportgen\reportsel.c
Missing field name
E55204 v_dialer\dialer\src\reports\reportgen\reportsel.c
Missing field value
E55205 v_dialer\dialer\src\reports\reportgen\reportsel.c
Duplicate field name found
E55206 v_dialer\dialer\src\reports\reportgen\reportsel.c
Invalid sort directive
E55207 v_dialer\dialer\src\reports\reportgen\reportsel.c
Error Pattern: %s
E55400 v_dialer\dialer\src\reports\reportgen\reportsub.c
Failed to write text substitution file
E55600 v_dialer\dialer\src\reports\reportgen\reportexp.cv_dialer\dialer\src\reports\reportgen\reportsel.cv_dialer\dialer\src\reports\reportgen\reportfmt.cv_dialer\dialer\src\reports\reportgen\reporthlp.c
Invalid number
356 Maintenance and Troubleshooting Guide March 2008
E55601 v_dialer\dialer\src\reports\reportgen\reportsub.cv_dialer\ivr\src\ivr_supr.c
Insufficient memory for %s
E56001 v_dialer\ivr\src\ivr_supr.c ivr_supr: Error connecting to socket, errno %d
E56002 v_dialer\ivr\src\ivr_supr.c ivr_supr: Unknown command ID:%d
E56003 v_dialer\ivr\src\ivr_supr.c ivr_supr: IVR_INTEGRATION not set in master.cfg
E56004 v_dialer\ivr\src\ivr_config.c Invalid IP address: %s
E56005 v_dialer\ivr\src\ivr_config.c No host information is loaded--%s
E56006 v_dialer\ivr\src\ivr_config.c Error - Failed to load user interface files
E56007 v_dialer\ivr\src\ivr_config.c Validation of IVR information failed
E56008 v_dialer\ivr\src\ivr_config.c Invalid IVR ID length: %s
E56009 v_dialer\ivr\src\ivr_config.c IVR ID not found in /etc/hosts file: %s
E56010 v_dialer\ivr\src\ivr_config.c IVR ID already exists: %s
E56011 v_dialer\ivr\src\ivr_config.c Invalid character in IVR ID: %s
E56012 v_dialer\ivr\src\ivr_config.c An IP address must be entered
E56013 v_dialer\ivr\src\ivr_config.c Fail to add to /etc/hosts: %s
E56014 v_dialer\ivr\src\ivr_config.c IVR ID %s not found
E56015 v_dialer\ivr\src\ivr_config.c Failed to add IVR %s
E56016 v_dialer\ivr\src\ivr_config.c IVR ID already exists in /etc/hosts file: %s
E56017 v_dialer\ivr\src\ivr_config.c Currently connected to IVR %s; cannot change or delete configuration
E56018 v_dialer\ivr\src\ivr_config.c IVR IP address already exists: %s
E56019 v_dialer\ivr\src\ivr_config.c IVR IP address already found in /etc/hosts file: %s
E56020 v_dialer\ivr\src\ivr_conn.c ivr_conn: ivr_conn service not found in /etc/services
Maintenance and Troubleshooting Guide March 2008 357
E56021 v_dialer\ivr\src\ivr_conn.c ivr_conn: Unable to create socket, errno %d - %s
E56022 v_dialer\ivr\src\ivr_conn.c ivr_conn: Unable to bind to the socket, errno %d
E56023 v_dialer\ivr\src\ivr_conn.c ivr_conn: Unable to connect to the socket, errno %d
E56024 v_dialer\ivr\src\ivr_conn.c ivr_conn: Unable to listen to the socket, errno %d
E56025 v_dialer\ivr\src\ivr_conn.c ivr_conn: Error in select, errno %d
E56026 v_dialer\ivr\src\ivr_conn.c ivr_conn: Error in accept, errno %d
E56027 v_dialer\ivr\src\ivr_conn.c ivr_conn: Error on recv from supervisor socket, errno %d
E56028 v_dialer\ivr\src\ivr_conn.c ivr_conn: Nothing read from supervisor socket, errno %d
E56029 v_dialer\ivr\src\ivr_conn.c ivr_conn: Unknown message '%s:%s' from supervisor socket
E56030 v_dialer\ivr\src\ivr_conn.c ivr_conn: Error on recv from IVR socket, errno %d
E56031 ivr_conn: Nothing read from IVR socket, errno %d
E56032 v_dialer\ivr\src\ivr_conn.c ivr_conn: Unknown message (%c) from IVR socket
E56033 v_dialer\ivr\src\ivr_conn.c ivr_conn: Invalid message (%s) in input IPC queue
E56034 v_dialer\ivr\src\ivr_conn.c ivr_conn: Unable to set socket to FIOASYNC, errno %d
E56035 v_dialer\ivr\src\ivr_conn.c ivr_conn: Unable to set socket to FIOSNBIO, errno %d
E56036 v_dialer\ivr\src\ivr_conn.c ivr_conn: Unable to set process to receive SIGIO, errno %d
E56037 v_dialer\ivr\src\ivr_conn_io.c ivr_conn: Send error, client %d (still trying)
E56038 v_dialer\ivr\src\ivr_conn_io.c ivr_conn: Send error, client %d (giving up)
E56039 v_dialer\ivr\src\ivr_conn_io.c : err=%d sent=%d rem=%d dt=%d try=%d
358 Maintenance and Troubleshooting Guide March 2008
E56040 v_dialer\ivr\src\ivr_conn_io.c ivr_conn: Error in select in MicroSleep, errno %d
E56041 v_dialer\ivr\src\ivr_conn_io.c ivr_conn: Fail to write to pipe - sd %d
E56042 v_dialer\ivr\src\ivr_conn_io.c ivr_conn: Caught signal %d, err %d
E56043 v_dialer\ivr\src\ivr_conn_io.c ivr_conn: sigaction failed in InitSigHandlers
E56044 v_dialer\ivr\src\ivr_conn.c ivr_conn: IVR pool job '%s' does not exist
E56045 v_dialer\ivr\src\ivr_conn.c ivr_conn: Error in trying to access IVR pool job '%s'; errno = %d
E56046 v_dialer\ivr\src\ivr_conn.c ivr_conn: Already connected to IVR '%s'
E56047 v_dialer\ivr\src\ivr_conn.c ivr_conn: Not connected to IVR '%s'
E56048 v_dialer\ivr\src\ivr_conn.c ivr_conn: Still connected to IVR '%s'
E56049 v_dialer\ivr\src\ivr_conn.c ivr_conn: Reset of IVR '%s' in progress, please wait...
E57000 v_dailer\dialer\dispatcher\dunupinit.c Dispatcher startup soe_init error: %d
E57001 v_dailer\dialer\dispatcher\dunupinit.c Dispatcher startup invalid argument count: %d
E57002 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\agent_time_util.cv_dialer\dialer\src\core\operator.cv_dailer\dialer\dispatcher\dunupinit.cv_dialer\dialer\src\swif\exec\opmon.c
Linked list insert error: %d for list: %s
E57003 Linked list create error: %d for list: %s
E57004 v_dailer\dialer\dispatcher\dunupinit.c Unable to find opmon IPC
E57005 v_dailer\dialer\dispatcher\dunupinit.c Unable to create dispatcher mailbox <%s>, error: %d
E57006 v_dailer\dialer\dispatcher\dunupinit.c Cleaning up received fatal signal: %d
Maintenance and Troubleshooting Guide March 2008 359
E57007 v_dailer\dialer\dispatcher\dunupinit.c Error: %d deleting dispatcher mailbox
E57008 v_dailer\dialer\dispatcher\dunupinit.cv_dailer\dialer\dispatcher\mp_change_groupid.cv_dailer\dialer\dispatcher\pa_acd_perm.cv_dailer\dialer\dispatcher\snd_agt_msg.cv_dailer\dialer\dispatcher\gateway.c
Send message error: %d <%s>
E57009 v_dailer\dialer\dispatcher\ap_aborting.cv_dailer\dialer\dispatcher\ap_acquiring.cv_dailer\dialer\dispatcher\ap_prereleasing.cv_dailer\dialer\dispatcher\ap_releasing.cv_dailer\dialer\dispatcher\dunupinit.cv_dailer\dialer\dispatcher\mp_change_groupid.cv_dailer\dialer\dispatcher\mp_job_set.cv_dailer\dialer\dispatcher\pa_acd_perm.cv_dailer\dialer\dispatcher\snd_agt_msg.cv_dailer\dialer\dispatcher\dunup.cv_dailer\dialer\dispatcher\gateway.c
Error trying to malloc space: <%s>
E57010 v_dailer\dialer\dispatcher\dunupinit.cv_dailer\dialer\dispatcher\mp_login.c
Error opening file: <%s>
E57011 v_dailer\dialer\dispatcher\dunup.c Unexpected object: %d msgtype: %d from md: %d
E57012 v_dailer\dialer\dispatcher\dunup.c Invalid msgtype: %d from md: %d
E57013 v_dailer\dialer\dispatcher\dunup.c Receive message error: %d
E57014 v_dailer\dialer\dispatcher\action_processor.c
Unknown mode %s: %d
360 Maintenance and Troubleshooting Guide March 2008
E57015 v_dailer\dialer\dispatcher\du_format.cv_dailer\dialer\dispatcher\mp_genrel_query.cv_dailer\dialer\dispatcher\mp_op_headset_state.cv_dailer\dialer\dispatcher\mp_op_link_failure.cv_dailer\dialer\dispatcher\mp_response.c
Attribute not found: %d
E57016 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\agent_time_util.cv_dialer\dialer\src\core\operator.cv_dailer\dialer\dispatcher\dunupinit.cv_dailer\dialer\dispatcher\genrel_util.cv_dailer\dialer\dispatcher\mp_acquire_op.cv_dailer\dialer\dispatcher\mp_call_connect.cv_dailer\dialer\dispatcher\mp_login.cv_dialer\dialer\src\swif\exec\opmon.c
Linked list queuing error: %s
E57017 v_dailer\dialer\dispatcher\dunuputil.c Invalid mailbox: %s
E57018 v_dailer\dialer\dispatcher\event_processor.cv_dailer\dialer\dispatcher\mp_call_event.c
Invalid event: %d %s
E57019 v_dailer\dialer\dispatcher\gateway.cv_dialer\dialer\src\swif\exec\ServMonMsg.cpp
Unable to register to mailbox <%s>, error: %d
E57020 v_dailer\dialer\dispatcher\mp_acquire_op.c
Duplicate acquire request on vdn <%s>
E57021 v_dailer\dialer\dispatcher\mp_acquire_op.c
Not enough licenses - Max acquire agents: %d
Maintenance and Troubleshooting Guide March 2008 361
E57022 v_dailer\dialer\dispatcher\mp_call_connect.cv_dailer\dialer\dispatcher\mp_call_event.cv_dailer\dialer\dispatcher\mp_change_groupid.cv_dailer\dialer\dispatcher\mp_create_call.cv_dailer\dialer\dispatcher\mp_domain_action.cv_dailer\dialer\dispatcher\mp_job_set.cv_dailer\dialer\dispatcher\mp_login.cv_dailer\dialer\dispatcher\mp_logout.cv_dailer\dialer\dispatcher\mp_trunk_release.cv_dailer\dialer\dispatcher\mp_user_action.c
Invalid attribute: %d %s
E57023 Unexpected call connect for call_id: %d
E57024 v_dailer\dialer\dispatcher\mp_call_made.c
Unexpected call made to vdn: <%s> scai_link: %d
E57025 v_dailer\dialer\dispatcher\mp_response.c
Call reject error: %d for call_id: %d
E57026 v_dailer\dialer\dispatcher\mp_call_reject.cv_dailer\dialer\dispatcher\mp_job_set.c
Invalid job id: %d
E57027 v_dailer\dialer\dispatcher\mp_create_call.c
Unexpected create call for call_req_id: %d
E57028 v_dailer\dialer\dispatcher\mp_domain_action.cv_dailer\dialer\dispatcher\mp_user_action.c
Invalid action: %d %s
E57029 v_dailer\dialer\dispatcher\mp_job_set.c Invalid process state: %d %s
E57030 v_dailer\dialer\dispatcher\mp_login.c Extension <%s> is already in use by user: %d
E57031 v_dailer\dialer\dispatcher\mp_response.c
Error: %d as a response to: <%s> message
E57032 v_dailer\dialer\dispatcher\mp_response.c
Unknown resp_type event: %d
362 Maintenance and Troubleshooting Guide March 2008
E57033 v_dailer\dialer\dispatcher\mp_response.c
Unexpected response objid: %d, invokeid: %d
E57034 v_dialer\dialer\src\core\agent_misc_util.cv_dailer\dialer\dispatcher\mp_timeout.c
Process <%s> not responding to msg: <%s>
E57035 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\agent_time_util.cv_dailer\dialer\dispatcher\mp_timeout.c
Get time error: <%d>, will try again
E57036 v_dialer\dialer\src\core\ao_recall.cv_dialer\dialer\src\core\agent_time_util.cv_dailer\dialer\dispatcher\mp_timeout.c
Invalid timeout event: <%d>
E57037 Voice message not defined: <%d>
E57038 v_dailer\dialer\dispatcher\mp_login.c Extension <%s> scai_link: %d is not installed
E57039 v_dailer\dialer\dispatcher\mp_call_connect.c
Expected timeout <%s> not found, call_id: <%d>
E57040 v_dailer\dialer\dispatcher\mp_call_made.c
Expected timeout <%s> not found, vdn: <%s>
E57041 v_dailer\dialer\dispatcher\mp_release.c Release of pbx ext <%s> which is not fully acquired
E57042 v_dailer\dialer\dispatcher\mp_login.c User id %d was already in use
E57043 v_dailer\dialer\dispatcher\mp_user_action.c
User ext <%s> scai_link <%d> is not found
E57044 v_dailer\dialer\dispatcher\dunupinit.c Unable to read acd_license.cfg, error: <%d>
E58002 v_dialer\dialer\src\core\agent.cv_dialer\dialer\src\core\caller.cv_dialer\dialer\src\core\operator.cv_dialer\dialer\src\reports\history\datamgr_init.cppv_dialer\dialer\src\swif\exec\ServMonMsg.cppv_dialer\dialer\services\srcEventServer.cppv_dialer\dialer\src\swif\exec\opmon.cv_dialer\dialer\src\core\porter.c
%s - Unable to initialize soe (%d)
E59500 v_dialer\dialer\src\core\jobctrl.c Job %s not currently running.
Maintenance and Troubleshooting Guide March 2008 363
E59501 dialer/src/core/jobctrl.cdialerCmdctrl\HeadsetLib.cpp
Illegal parameters: %s
E59502 Job %s not ready.
E59503 v_dialer\dialer\src\core\jobctrl.c Job name not specified: %s
E59505 v_dialer\dialer\src\core\jobctrl.c Job(%s) not linkable
E59506 v_dialer\dialer\src\core\jobctrl.c Malloc failure in list_agents
E59507 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Inbound capable jobs only: %s
E59508 v_dialer\dialer\src\core\jobctrl.c Outbound capable jobs only: %s
E59508 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Monitoring of operator disabled
E59509 v_dialer\dialer\src\core\jobctrl.c Monitoring of operator disabled
E59510 v_dialer\dialer\src\core\jobctrl.c Error, no operator %s on job %s
E59511 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Managed dialing capable jobs only: %s
E59512 v_dialer\dialer\src\core\jobctrl.c Illegal time zone: %s
E59513 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Illegal action %s
E59514 v_dialer\dialer\src\core\jobctrl.c Inbound capable jobs only
E59516 v_dialer\dialer\src\core\jobctrl.c Outbound capable jobs only
E59517 v_dialer\dialer\src\core\jobctrl.c Managed dialing capable jobs only
E59518 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Illegal time zone name %c
E59519 v_dialer\dialer\src\core\api_jobctl.cv_dialer\dialer\src\core\jobctrl.c
Unable to open transfer lock file %s
E59520 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Not a multi-unit job: %s
364 Maintenance and Troubleshooting Guide March 2008
E59521 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
No units currently available
E59522 dialer/src/core/jobctrl.cdialerCmdctrl\CJobTableSO.cpp
Illegal units %s
E59527 v_dialer\dialer\src\core\jobctrl.c Job name not specified
E59528 v_dialer\dialer\src\core\jobctrl.c Job linking capable jobs only
E59530 v_dialer\dialer\src\core\jobctrl.c Job not currently linked
E59531 Invalid port for monitoring agents
E59533 v_dialer\dialer\src\core\jobctrl.c Warning: Operator already being transferred.
E59534 v_dialer\dialer\src\core\jobctrl.c Job1 %s not ready.
E59535 v_dialer\dialer\src\core\jobctrl.c Job2 %s not ready.
E59539 v_dialer\dialer\src\core\jobctrl.c Illegal change %s
E59540 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
Headset ID (%s) already in use
E59541 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
No more headsets permitted on system
E59542 v_dialer\dialer\src\core\jobctrl.cv_dialer\dialer\DialerCmdCtrl\HeadsetLib.cpp
Failure to access headset table
E59596 v_dialer\dialer\src\core\jobctrl.c No operator slot available
E59597 v_dialer\dialer\src\core\jobctrl.c System is not running
E59598 v_dialer\dialer\src\core\jobctrl.c Illegal parameters
E59599 v_dialer\dialer\src\core\jobctrl.c Bad command
E59600 v_dialer\dialer\src\core\jobctrl.c Not a Cruise Control job
E61000 midtier\unixdev\CmdCtrl\src\DialerCfgClient.cpp
%s failed: Exception %s; Id %ul
Maintenance and Troubleshooting Guide March 2008 365
E61001 midtier\unixdev\RealTimeDataServer\src\RTRMmain.cppmidtier\unixdevv_dialer\dialer\services\src\Init.cppv_dialer\dialer\services\srcEventServiceIF_i.cppmidtier\unixdev\CmdCtrl\src\DialerCfgClient.cppmidtier\unixdev\Logger\src\LoggingServer_i.cppmidtier\unixdev\ServiceActivation\src\ServiceActivatingIFImpl.cxxmidtier\unixdev\ServiceMonitor\src\ServiceMonitor_ServiceMonitoringIFImpl.cxxmidtier\unixdevv_dialer\dialer\services\src\DialerEventServerIF_i.cppmidtier\unixdevv_dialer\dialer\services\src\EventClient.cppmidtier\unixdevv_dialer\dialer\services\src\EventServer.cppmidtier\unixdevv_dialer\dialer\services\src\EventServiceIF_i.cppmidtier\unixdev\SysHealth\src\SystemHealthEntryImpl.cppv_dialer\dialer\DialerServiceActivation\src\DSAServiceIFImpl.cxx\DSHdialerSystemHealthEntryImpl.cppv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitoringIFImpl.cxx
Exception raised: %s
E61002 midtier\unixdevv_dialer\dialer\services\src\EventServiceIF_i.cppv_dialer\dialer\services\srcEventServiceIF_i.cpp
Failed to create thread
366 Maintenance and Troubleshooting Guide March 2008
E61003 midtier\unixdev\CmdCtrl\src\DialerCfgClient.cppmidtier\unixdev\RealTimeDataServer\src\RTRMmain.cppmidtier\unixdevv_dialer\dialer\services\src\EventClient.cppmidtier\unixdevv_dialer\dialer\services\src\EventServer.cppmidtier\unixdevv_dialer\dialer\services\src\EventServiceIF_i.cppmidtier\unixdevv_dialer\dialer\services\src\Init.cppv_dialer\dialer\services\srcEventServiceIF_i.cpp
Caught unknown exception
E61004 midtier\unixdev\services\src\Init.cpp Failed to write to IOR file %s
E61005 midtier\unixdev\services\src\Init.cpp Failed to initialize signal handlers
E61006 midtier\unixdev\services\src\Init.cpp Failed to initialize %d
E61007 midtier\unixdev\services\src\EventServer.cpp
attach_datashm () failed -- is system up?
E61008 midtier\unixdev\services\src\ShmDataReader.cpp
Number of line pools defined in LINEASSIGN in master.cfg (%d) exceeds value of MAX_LINEASSIGN_LABELS (%d)
E61009 Exceeded max limit of inactive jobs (%d); skipping the rest
E61040 midtier\unixdev\services\src\Init.cpp CosNaming NamingContext not found
E61041 midtier\unixdev\services\src\Init.cpp CosNaming NamingContext cannot proceed
E61042 midtier\unixdev\services\src\Init.cpp CosNaming NamingContext invalid name
E61043 midtier\unixdev\services\src\Init.cpp CosNaming NamingContext already bound
E62000 v_dialer\dialer\DialerCmdCtrl\src\CmdCtrl_Table_i.cpp
(%s): Operation %s is not implemented
E62001 dialer\Cmdctrl\CCompcodeTableSO.cppv_dialer\dialer\DialerCmdCtrl\CConfigTableSO.cpp
(%s): Operation %s is not applicable to object %s
Maintenance and Troubleshooting Guide March 2008 367
E62002 v_dialer\dialer\DialerCmdCtrl\AgentLib.cppv_dialer\dialer\DialerCmdCtrl\CTableSO.cppv_dialer\dialer\DialerCmdCtrl\FileTable.cpp
(%s): Requested column %s not available in table %s
E62003 v_dialer\dialer\DialerCmdCtrl\AgentLib.cpp
(%s): Invalid predicate expression %s: %s
E62004 v_dialer\dialer\DialerCmdCtrl\AgentLib.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cppv_dialer\dialer\DialerCmdCtrl\FileTable.cppv_dialer\dialer\DialerCmdCtrl\SelData.cppv_dialer\dialer\DialerCmdCtrl\StratData.cpp
(%s): Invalid column name %s in predicate expression
E62005 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\CompcodeTable.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cppv_dialer\dialer\DialerCmdCtrl\RecordLock_utest.cpp
(%s): Record %s is locked by owner %s
E62006 v_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
(add_lock): failed for Record %s Owner %s
E62007 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
(%s): lock for Record %s Owner %s is no longer valid
368 Maintenance and Troubleshooting Guide March 2008
E62008 v_dialer\dialer\DialerCmdCtrl\CompcodeData.cppv_dialer\dialer\DialerCmdCtrl\JobData.cppv_dialer\dialer\DialerCmdCtrl\PromptData.cppv_dialer\dialer\DialerCmdCtrl\SelData.cppv_dialer\dialer\DialerCmdCtrl\StratData.cpp
(%s): internal error - no data
E62009 v_dialer\dialer\DialerCmdCtrl\CompcodeData.cpp
(%s): no values for input
E62010 v_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallListTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CConfigTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\CLineGrpTableSO.cppv_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cppv_dialer\dialer\DialerCmdCtrl\CTelephnySpt.cpp
(%s): Operation %s requires %s
E62011 v_dialer\dialer\DialerCmdCtrl\CConfigTableSO.cppv_dialer\dialer\DialerCmdCtrl\CLineGrpTableSO.cppv_dialer\dialer\DialerCmdCtrl\CodeDescTable.cppv_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cppv_dialer\dialer\DialerCmdCtrl\CTelephnySpt.cppv_dialer\dialer\DialerCmdCtrl\TelephnyTable.cppv_dialer\dialer\DialerCmdCtrl\VoicemsgCfgTable.cpp
(%s): Operation %s: Invalid parameters
Maintenance and Troubleshooting Guide March 2008 369
E62012 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
(%s): Record %s is not locked by owner %s, current owner is %s
E62013 v_dialer\dialer\DialerCmdCtrl\AgentLib.cppv_dialer\dialer\DialerCmdCtrl\CCompcodeTableSO.cppv_dialer\dialer\DialerCmdCtrl\FileTable.cpp
(%s): Requested row %s not available in table %s
E62014 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
Unable to create file %s, errno = %d
E62015 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
Unable to open file %s for read/write, errno = %d
E62016 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
Unable to open file %s for update, errno = %d
E62017 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
Unable to open file %s for readonly, errno = %d
E62018 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
Unable to delete file %s, errno = %d
E62019 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
Unable to create file %s, file already exists
370 Maintenance and Troubleshooting Guide March 2008
E62020 v_dialer\dialer\DialerCmdCtrl\CrudulMethods.cppv_dialer\dialer\DialerCmdCtrl_Agent_i.cppv_dialer\dialer\DialerCmdCtrl_CallSelect_i.cppv_dialer\dialer\DialerCmdCtrlv_dialer\dialer\DialerCmdCtrl_CallStrategy_i.cppv_dialer\dialer\DialerCmdCtrlv_dialer\dialer\DialerCmdCtrl_Compcode_i.cppv_dialer\dialer\DialerCmdCtrl_Config_i.cppv_dialer\dialer\DialerCmdCtrl_DialerControl_i.cppv_dialer\dialer\DialerCmdCtrl_Domain_i.cppv_dialer\dialer\DialerCmdCtrl_Headset_i.cppv_dialer\dialer\DialerCmdCtrl_Ivr_i.cppv_dialer\dialer\DialerCmdCtrl_Job_i.cppv_dialer\dialer\DialerCmdCtrl_SelectIndex_i.cppv_dialer\dialer\DialerCmdCtrl_TableFactory_i.cpp
General Exception - Table: %s Method: %s
E62021 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
File %s does not exist, errno = %d
E62022 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
(%s): Operation %s requires Record ID as one of the query conditions
E62023 v_dialer\dialer\DialerCmdCtrl_TableFactory_i.cpp
Incorrect Table Type
Maintenance and Troubleshooting Guide March 2008 371
E62024 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\CompcodeTable.cppv_dialer\dialer\DialerCmdCtrl\CTelephnySpt.cppv_dialer\dialer\DialerCmdCtrl\MasterCfgTable.cppv_dialer\dialer\DialerCmdCtrl\TelephnyTable.cppv_dialer\dialer\DialerCmdCtrl\VoicemsgCfgTable.cpp
(%s): lock_record - Unknown locktype %s
E62025 v_dialer\library\libutil++\src\account_r. (%s) [%#x] : %s(): Error %#x [%s] %s occurred
E62026 v_dialer\library\libutil++\src\account_r. (%s) [%#x] : %s(): Error %#x %s occurred\n
372 Maintenance and Troubleshooting Guide March 2008
E62027 v_dialer\dialer\DialerCmdCtrl\CrudulMethods.cppv_dialer\dialer\DialerCmdCtrl_Agent_i.cppv_dialer\dialer\DialerCmdCtrl_Blend_i.cppv_dialer\dialer\DialerCmdCtrl_CallSelect_i.cppv_dialer\dialer\DialerCmdCtrl_CallStrategy_i.cppv_dialer\dialer\DialerCmdCtrl_Compcode_i.cppv_dialer\dialer\DialerCmdCtrl_Config_i.cppv_dialer\dialer\DialerCmdCtrl_DialerControl_i.cppv_dialer\dialer\DialerCmdCtrl_Domain_i.cppv_dialer\dialer\DialerCmdCtrl_Headset_i.cppv_dialer\dialer\DialerCmdCtrl_Ivr_i.cppv_dialer\dialer\DialerCmdCtrl_Job_i.cppv_dialer\dialer\DialerCmdCtrl_SelectIndex_i.cppv_dialer\dialer\DialerCmdCtrl_TableFactory_i.cpp
Platform Exception - Table: %s Method: %s
E62028 %s - Error allocating memory
E62029 v_dialer\dialer\DialerCmdCtrl\MsgQueue.cpp
(%s): Invalid Message Queue handle
E62030 v_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cpp
(%s): Invalid agent name
E62031 v_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cpp
(%s): Invalid headset ID
E62032 v_dialer\dialer\DialerCmdCtrl\AgentShmLib_utest.cppv_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCompcodeTableSO.cpp
(%s): Failed to connect to shared memory
E62033 v_dialer\dialer\DialerCmdCtrl\ShmAccess.cpp
(%s): Failed to connect to agent %s shared memory
E62034 (%s): Agent %s is not active
Maintenance and Troubleshooting Guide March 2008 373
E62035 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cpp
(%s): Agent %s is already monitored by line %d
E62036 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
(%s): Failed to get IPC key for job: %s
E62037 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cpp
(%s): Failed to open IPC for %s
E62038 v_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cpp
(%s): Invalid message to notify agent(s)
E62039 v_dialer\dialer\DialerCmdCtrl\AgentShmLib_utest.cppv_dialer\dialer\DialerCmdCtrl\CAgentTableSO.cpp
(%s): Failed to connect to job %s shared memory
E62040 v_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
Lock expired for Record: %s, Owner: %s
E62041 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Unable to fill required field %s for Job %s
E62042 v_dialer\library\libcallsel\src\cllcallsel.cpp
(%s): Selection Index Failure: Could not verify selection %s with list %s. Run Verify Selection to find specific errors.
E62043 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cpp
(%s): Invalid agent name selection pattern '%s'
E62044 v_dialer\library\libcallsel\src\cllcallsel.cpp
(%s): Selection Index Failure: Could not verify strategy %s with list %s. Run Verify Strategy to find specific errors.
E62045 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
(%s): Shared memory object not associated with job: %s
E62046 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Invalid parameters for setting %s
E62047 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Number of Call Strategy Control items requested is greater than allowed on system
E62048 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Requested value less than minimum value.
374 Maintenance and Troubleshooting Guide March 2008
E62049 dialerclient\Redwood\VBApps\Editor\MDIForm1.frmv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Unable to start job - job file in use by character user interface.
E62050 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppdialerclient\Redwood\VBApps\Editor\MDIForm1.frm
Unable to start job - lock on file failed.
E62051 dialerclient\Redwood\VBApps\Editor\MDIForm1.frmdialerclient\Redwood\VBApps\Editor\Modules\General.bas
Unable to start job - job file in use by %s
E62052 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cppv_dialer\dialer\DialerCmdCtrl\CompcodeTable.cpp
File %s in use by character user interface.
E62053 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\CompcodeTable.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
Lock on file failed.
E62054 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
No response from Job Starter for %s
E62055 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Invalid response from Job Starter for %s
E62056 Failed check for required fields due to lock on job file
E62057 v_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cpp
(%s): Invalid index process handle
E62058 v_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cpp
(%s): Unable to locate status for calling index process handle '%s'
Maintenance and Troubleshooting Guide March 2008 375
E62059 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cpp
(%s): Failed to send a notification to agent %s
E62060 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cpp
Invalid file name: %s
E62061 v_dialer\dialer\DialerCmdCtrl\CSelIndexTableSO.cpp
(%s): Communication with remote list server failed when processing %s calling list and %s calling selection
E62062 v_dialer\library\libcallsel\src\CallStgyLib.cpp
(%s): Invalid Next Phone definition from phone %s to phone %s that creates infinite loop
E62070 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptSyntaxErrorRe.cpp
%s(%d): Syntax error: %s
E62071 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptSyntaxErrorRe.cpp
%s(%d): Error in command '%s': %s
E62072 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Unknown variable name '%s'
E62073 v_dialer\dialer\DialerCmdCtrl\CTelephnySpt.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Unexpected error in script definition
E62074 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Total number of lines %d exceeds maximum allowed (must be %d or less)
E62075 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Invalid field name '%s'
376 Maintenance and Troubleshooting Guide March 2008
E62076 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Invalid number of days %d
E62077 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Invalid number of hours %d
E62078 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Invalid number of minutes %d
E62079 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Invalid audio message ID value %d
E62080 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Invalid time interval value %d
E62081 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Invalid relational operator '%s'
E62082 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Invalid completion code keyword '%s'
E62083 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XmlBase.cpp
(%s): Failed to initialize XML processor: %s
E62084 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XmlBase.cpp
(%s): Failed to terminate XML processor: %s
E62085 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XmlBase.cpp
(%s): Failed to initialize XSLT processor: %s
Maintenance and Troubleshooting Guide March 2008 377
E62086 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XmlBase.cpp
(%s): Failed to terminate XSLT processor: %s
E62087 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptTransform.cpp
(%s): XML processing failed: %s
E62088 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptTransform.cpp
(%s): XML/DOM processing failed
E62089 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\SptTransform.cpp
(%s): XSLT processing failed: %s
E62090 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XmlDomErrorHandler.cpp
Invalid element '%s'
E62091 v_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cppv_dialer\dialer\DialerCmdCtrl\XsltBase.cpp
(%s): Failed to compile XSLT stylesheet '%s'
E62092 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Invalid label length '%s' (must be %d bytes or less)
E62093 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Referenced label '%s' not defined
E62094 v_dialer\dialer\DialerCmdCtrl\SptParserApi.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Command '%s' malformed
E62095 v_dialer\dialer\DialerCmdCtrl\CTelephnySpt.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
(%s) Operation %s:%s failed during validation
378 Maintenance and Troubleshooting Guide March 2008
E62096 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cppv_dialer\dialer\DialerCmdCtrl\SptProcessor_utest.cpp
Duplicate label '%s' definition (first definition found in file %s, line %d)
E62097 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
File not open
E62098 v_dialer\dialer\DialerCmdCtrl\FileAccess.cpp
Unable to seek to beginning of file
E62099 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
File %s is not a valid audio message file
E62100 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
Combined size of audio messages of %d kB (approx. %02d:%02d minutes) exceeds the total storage capacity %d kB (approx. %02d:%02d minutes) on PG230 board
E62101 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
Total number of audio messages %d exceeds the limit of %d messages
E62102 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
Referenced %s audio message not available on the system
E62103 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
Audio message ID %d exceeds the the limit of highest ID value %d
E62104 v_dialer\dialer\DialerCmdCtrl\DccsAudioFileValidator.cpp
Using a reserved audio message ID %d
E62105 v_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cpp
Invalid attribute keyword '%s'
E62106 v_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\DccsSptValidator.cpp
Invalid attribute value '%s' for keyword '%s'
E62107 Cannot start monitor agent '%s' audio when on a shadow job
E62108 Cannot stop monitor agent '%s' audio when on a shadow job
E62109 v_dialer\dialer\DialerCmdCtrl\AgentShmLib.cpp
Cannot send a message to '%s' agent when on a shadow job
E62110 Cannot remove an agent '%s' when on a shadow job
Maintenance and Troubleshooting Guide March 2008 379
E62111 Cannot start monitor agent '%s' audio when on a shadow job
E62112 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cppv_dialer\dialer\DialerCmdCtrl\RecordLock_utest.cpp
Record is already locked by current user '%s'
E62113 v_dialer\dialer\DialerCmdCtrl\CCallSelTableSO.cppv_dialer\dialer\DialerCmdCtrl\CCallStratTableSO.cppv_dialer\dialer\DialerCmdCtrl\CJobTableSO.cppv_dialer\dialer\DialerCmdCtrl\RecordLock.cpp
Record is not locked. Current user '%s'
E62114 Unknown lock state. Current user '%s'
E63000 midtier\unixdev\CmdCtrl\src\CCTable.cppmidtier\unixdev\CmdCtrl\src\CmdCtrlImpl.cpp
Unable to send a message to Dialer: %s Object: %s
E66666 v_dialer\dialer\src\core\agent.c
E70000 v_dialer\dialer\src\core\agent_io_util.c Incorrect number of arguments
E70001 v_dialer\dialer\src\core\agent_io_util.c Incorrect message type
E70002 v_dialer\dialer\src\core\agent_time_util.c Timed out waiting for %s
E70003 v_dialer\dialer\src\core\agent_misc_util.c
Incorrect job type
E70004 v_dialer\dialer\src\core\agent_misc_util.cv_dialer\dialer\src\core\agent_sys_util.c
Command failed
E70005 v_dialer\dialer\src\core\agent_io_util.c Incoming command exceeded maximum buffer size
E70006 v_dialer\dialer\src\core\agent.c Must select unit
E70007 v_dialer\dialer\src\core\agent_tdss_util.c Cannot transfer inbound call
380 Maintenance and Troubleshooting Guide March 2008
E70008 v_dialer\dialer\src\core\agent_tdss_util.c Must specify transfer job
E70009 v_dialer\dialer\src\core\agent_tdss_util.c Unable to send message to %s
E70010 v_dialer\dialer\src\core\agent_tdss_util.c Conference in progress
E70011 v_dialer\dialer\src\core\agent_hs_util.c Call blending is not available
E70012 v_dialer\dialer\src\core\agent_misc_util.c
Password has expired
E70013 v_dialer\dialer\src\core\agent_misc_util.c
Password can not be changed, change limit not expired
E70014 Password can not be changed, password file locked
E70015 v_dialer\dialer\src\core\agent_misc_util.c
Unable to become root privilege for setting password
E70016 v_dialer\dialer\src\core\agent_misc_util.c
Original password is invalid
E70017 v_dialer\dialer\src\core\agent_misc_util.c
New password entered is invalid
E70018 v_dialer\dialer\src\core\agent.c IVR_SCRIPT is blank in job %s
E70019 v_dialer\dialer\src\core\agent.c Job %s is not valid for IVR agents
E72000 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
%s can't initialize signal handlers
E72010 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
%s server name AlreadyBound. ignored
E72030 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
%s server name resolve CannotProceed
E72040 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
%s server name resolve InvalidName
Maintenance and Troubleshooting Guide March 2008 381
E72050 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
%s Caught CORBA system exception: err=%s
E72051 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
%s Caught CORBA exception: err=%s
E72052 v_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
%s Caught CORBA TRANSIENT error.
E72060 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DSMEvent.cxxv_dialer\dialer\DialerServiceMonitor\src\EventReceiver.cxxv_dialer\dialer\DialerServiceMonitor\src\SoeEvent.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
%s Caught unknown exception
E72070 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
%s is NotFound
E72080 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
failed to write %s IOR
E72090 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxx
%s:: Caught LogOnOffError exception(%d, %s)
E72100 v_dialer\dialer\DialerServiceActivation\src\DSA.cxx
function %s failed!
E72110 failed to create %s!
E72120 v_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxx
can not start activation, %s!
382 Maintenance and Troubleshooting Guide March 2008
E72130 v_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxx
failed on starting a %s thread.
E72140 v_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxx
reqID=%d, failed to add request.
E72150 v_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxx
failed to load %s.
E72160 v_dialer\dialer\DialerServiceActivation\src\DSA.cxxv_dialer\dialer\DialerServiceActivation\src\DSAIFImpl.cxxv_dialer\dialer\DialerServiceActivation\src\DSAServiceIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\EventReceiver.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitoringIFImpl.cxx
%s: failed on %s.
E72170 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
reqID=%d, Failed to execute child process =%s. cmd=%s, errno=%d, ret=%d
E72180 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
reqID=%d, Failed to start the service=%s
E72190 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
reqID=%d, Caught DSAError.failed to stop the service=%d
E72200 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
reqID=%d, Caught unknown exception. failed to stop the service=%d
E72201 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
E72210 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
%s: reqID=%d, the reference no longer denotes an existing obj
Maintenance and Troubleshooting Guide March 2008 383
E72220 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
%s: reqID=%d, could not decide whether or not obj exists.
E72230 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
%s: reqID=%d, failed on calling observer's Update method.
E72240 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
%s: reqID=%d, cmd=%s, caught unknown exception. %s
E72250 v_dialer\dialer\DialerServiceActivation\src\DSARequest.cxx
%s: reqID=%d, Failed to %s. cmd=%s, errno=%d, ret=%d
E72260 v_dialer\dialer\DialerServiceActivation\src\DSAServiceIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitor.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitoringIFImpl.cxx
%s: Failed to convert from char to LocText
E72270 v_dialer\dialer\DialerServiceMonitor\src\DialerServiceController.cxx
%s: the event either is NOT found or is not supported or there is no info for the event.
E72280 v_dialer\dialer\DialerServiceMonitor\src\\DialerServiceMonitor.cxxv_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
%s: Caught SubError. SubError is: errorID =%s, msg=%s.
E72290 v_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
%s: input param ObserverIF_ptr is null.
E72300 v_dialer\dialer\DialerServiceMonitor\src\DialerServiceMonitorIFImpl.cxx
%s: Create error=%d on mailbox: %s
E72310 v_dialer\dialer\DialerServiceMonitor\src\EventReceiver.cxx
%s: Create error on mailbox: %s
E72320 v_dialer\dialer\DialerServiceMonitor\src\EventReceiver.cxxv_dialer\dialer\DialerServiceMonitor\src\SoeEvent.cxx
384 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 385
Cannot transfer inbound callAn agent is unable to transfer an inbound call.
Description
An agent is unable to transfer an inbound call. This error occurs when the AGTMoFlash_fn agent call or the agent API calls AGTMoFlashBlind or AGTMoFlashSupv attempt to transfer an inbound call.
386 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 387
Command failedAn agent API command failed.
Description
This error occurs when trying to set an agent password and an internal system error occurs.
388 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 389
Timed out waiting for <message>Pending request timed out waiting for a command that timed out.
Description
<message>, a string, contains the name of the command that timed out and the response that the agent binary was expecting from Avaya Proactive Contact.
390 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 391
Operator monitor process does not respondA request concerning an agent�s headset volume has generated no response.
Description
A request concerning an agent�s headset volume has generated no response.
392 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 393
Agent <name> logged in Already - Access DeniedAgent <name> is already logged in to the system.
Description
An agent tried to log on to the system with an agent name already in use and access was denied.
394 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 395
Unable to send message to porterAn agent cannot send a message to porter.
Description
An agent cannot send a message to porter.
396 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 397
Password has expiredDuring agent log on, the system determines the agent�s password has expired.
Description
During agent log on, the system determines the agent�s password has expired.
398 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 399
<agent><agent_name> - Operator number returned invalid <slot_num>
The agent logon is invalid.
Description
The <slot_num> is the agent slot number assigned to the agent with user name <agent_name>.
400 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 401
Incorrect message typeAgent application message headers may not be formatted correctly.
Description
This error message may mean that agent application message headers are not formatted correctly. The message type should be one of the following:
● Data
● Pending
● Error
● Response
● Busy
● Notify
402 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 403
Incorrect number of argumentsCommand had wrong number of arguments.
Description
An agent application issued a command containing the wrong number of arguments.
404 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 405
Must select unitAn agent did not select a unit ID value.
Description
The agent is logged in to a Unit Work List job but has not selected a unit ID value to work with. A Unit Work List job divides customer records into work lists or subsets. Agents work with records only in their assigned work lists.
406 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 407
Failed to allocate memoryA process failed to allocate memory.
Description
Many different processes can generate this error message. A process is about to store something in memory and finds that it cannot allocate that memory for its purpose. In general, this means a malloc call failed.
408 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 409
Audio file name too longAudio file name is too long
Description
An audio file name exceeds the eight character limit.
410 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 411
Bad argumentA process encountered a bad argument to a function when trying to execute.
Description
A process encountered a bad argument to a function when trying to execute. This error message can occur when the readtape, writetape, or pds_page binary is trying to write a message to the screen. It can also occur when the swif_mako process or in some cases with job control.
The error message should provide the context of the error.
412 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 413
ERROR - Unknown file descriptorAgent attempted a command that was not correctly formed.
Description
An agent attempted a command that was not correctly formed.
414 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 415
Invalid entry for <name> in <filename> A process accessed the named file for the named parameter which has an invalid value.
Description
A process, typically in shared memory, found an invalid parameter value in the named file. The most common reason for this error is an invalid value for the LINEASSIGN value in the $VOICEDIR/etc/master.cfg file.
416 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 417
Field has incorrect lengthList distribution process finds calling list field with incorrect length.
Description
The listdist binary, upon opening the calling list, checks the list�s status field locations and finds a field with an incorrect length.
418 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 419
Bad file descriptor <num>Process encounters a bad file descriptor.
Description
A process encounters a bad file descriptor while trying to access a calling list.
420 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 421
Invalid headset number <num> <line>A process accessed switch information concerning headsets and encountered a headset with an invalid number.
Description
A process accessed switch information concerning headsets and encountered a headset with an invalid number. The $VOICEDIR/config/dgswitch.cfg file contains the valid numbers.
422 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 423
Failed to initialize screen environmentWindows screen environment failed to start.
Description
When starting a Windows-based application, the application does not start because Avaya Proactive Contact could not initiate the Windows screen environment.
424 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 425
Invalid line selectionChoice of line to select is invalid.
Description
When viewing call lists or running jobs, for instance, the system may prompt you to select a line of the output on the screen to view. Your answer to this prompt did not mach any line number available for viewing.
426 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 427
Invalid logical connector <name>A logical connector such as AND has been misspelled.
Description
When creating call strategy you can use logical operators such as AND, OR to create groupings of criteria. One of these groupings has an invalid logical connector.
428 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 429
Invalid recall code <num>While working on call strategies, the system encountered an invalid recall code.
Description
While working on call strategies, the system encountered an invalid recall code.
430 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 431
Invalid ring count <num>A call strategy process encountered an invalid ring count, <num>.
Description
A call strategy process encountered an invalid ring count, <num>.
432 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 433
Invalid time formatIncorrect time format used.
Description
The code that generated this error message requires the user to provide a time. The time was not given in the correct format, HH.MM.SS
434 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 435
Conference in progressAn agent attempted to add a call to a conference the call was already in.
Description
An agent attempted to add a call to a conference the call was already in.
436 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 437
Field not defined in calling listA calling list contains a field that is not defined.
Description
A calling list contains a field that is not defined in the fdict file associated with the calling list.
Note:Note: If this error occurs when creating a hash index for the calling list, the
STATUSFLAG field is the source of the error.
438 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 439
Unable to create fileA process cannot create a file required to successfully complete.
Description
Avaya Proactive Contact processes often create files. This particular error message is generated only during the following activities:
● Writing record numbers from the hash index file into a calling list.
● Moving record data, field by field, from one calling list to another.
● Converting zip codes to area codes.
440 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 441
agent - Failed to read from file <name>A process, agent, is unable to read the contents of the named file.
Description
This error can occur from a wide variety of sources and for a equally wide range of reasons: Some of the reasons are:
● There is not enough memory allocated to read the file.
● The process cannot read a record in the file
442 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 443
Failed to unlock fileA locked file cannot be unlocked.
Description
Typically, if more than one process or person can access file at any time, a process locks a file when it is in use so that changes cannot be made by more than user at a time. In this case a file that was locked cannot be unlocked.
This message can occur whenever a process tries to access a call list or other data file.
444 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 445
Warning: CFRM message truncatedWhile sending a reply message to the last process that sent an IPC message to the process that generated the error message, the reply message is truncated.
Description
While sending a reply message to the last process that sent an IPC message to the process that generated the error message, the reply message is truncated. The message is truncated either because it is too long or it is no longer a valid message.
446 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 447
Callbacks are not permitted on inbound callsAgent tried to make a callback on an inbound call.
Description
Agent tried to make a callback on an inbound call and callbacks are not permitted on inbound calls.
448 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 449
Field <name> not defined in calling list <filename>A process tried to access the named field in the named calling list and the field does not exist.
Description
A process tried to access the named field in the named calling list and the field does not exist.
450 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 451
clstat <xfd> failedCreation of a calling list, xfd, header failed.
Description
A process trying to create a list header for the calling list identified by xfd, was unsuccessful.
452 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 453
Failed to remove file <filename>User attempted to remove a calling list file and could not.
Description
User attempted to remove a calling list file and could not. The error message does identify the file that was not removed.
454 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 455
Clear fdict <number> failedCould not clear fdict file <num>.
Description
While creating a new header record and loading header data for the current xfd, there was a failure to clear the fdict file <num>.
456 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 457
Date is before the current dateThe date for the command is before the current date.
Description
The date for the command is before the current date.
458 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 459
Incoming command exceeded maximum buffer sizeAn agent binary command exceeded the maximum buffer size.
Description
An agent binary command exceeded the maximum buffer size.
460 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 461
<string>: Confirm error (num)An Avaya CTI process is looking for confirmation of an event.
Description
An Avaya CTI process is looking for confirmation of an event. The string value in the error message can be one of these values:
● RouteSelectReq
● MsgCall - num = 21
● CSTA_SET_AGENT_STATE
● Monitor Agent
462 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 463
File corruption or record size mismatch detected in calling list (name>
While attempting to access a calling list, a process found either a corrupt file or a record that did not match its known size.
Description
While attempting to access a calling list, a process found either a corrupt file or a record that did not match its known size.
464 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 465
CTI Error: <string><num>Each CTI error designated by this error message carries the clue to its origin in the string.
Description
Each CTI error designated by this error message carries the clue to its origin in the string. For instance, these errors:
1. Error 65
CTI Error:ACSUNSOLICITED:ACS_UNIVERSAL_FAILURE error = 65
tells you the Avaya CT server was shut down.
2. Error -5
CTI Error:acsOpenStream? failed error = -5
tells you that Avaya CT server is not present in the network.
3. Error 25
acsOpenStream: ACS_UNIVERSAL_FAILURE_CONF error = 25
tells you that the login or password was invalid.
4. Error 1007
acsOpenStream: ACS_UNIVERSAL_FAILURE_CONF error = 1007
tells you that the driver was unable to open the new session because no link was available to the PBX.
466 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 467
CTI not configured for agent eventsThe Avaya CT Server is not enabled for agent events.
Description
The Avaya CT Server is not enabled for agent events.
468 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 469
Duplicate ALL phone numbers specificationA process was making a change to a calling list in the memory database and an error occurred.
Description
A process was making a change to a calling list in the memory database and an error occurred., The change most likely involved a time zone setting or the STD_TO_DIALFMT setting of one or more telephone numbers.
470 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 471
Duplicate country specifiedThe system encountered duplicate country settings where it expected a single country.
Description
The system while loading country specific settings from files such as locale.cfg, encountered setting with duplicate countries where there should only be one country setting.
472 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 473
Environment variable not setAn environment variable required for correct operation of Avaya Proactive Contact is missing.
Description
Environment variables determine how many aspects of the system work. In this case, the most likely environment variable this not set or not set correctly is $VOICEDIR.
474 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 475
OnEventEstablished: Unknown command (7)An established event occurred after a request to hang up a call, but before the Clear Call Confirmation.
Description
An established event occurred after a request to hang up a call, but before the Clear Call Confirmation.
476 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 477
Recall attempt can�t exceed <num>The number of recall attempts cannot exceed <num>.
Description
An agent tried to exceed the allowed number, <num>, of recall attempts.
478 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 479
Extra comma in selection criteriaWhen setting up call strategy, found an extra comma in selection criteria.
Description
When setting up call strategy, the system found an extra comma in selection criteria.
480 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 481
Failed to setup command keysThe command keys for the graphical user interface are not available.
Description
When starting Avaya Proactive Contact, the command keys do not work.
482 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 483
Failed to lock fileA process did not lock a file.
Description
A file is open and can be accessed by more than one process for change. Typically, if more than one process or person can access file at any time, a process locks a file when it using so that changes cannot be made while the file is in use.
This message alerts the user that a file that should be locked, is not locked. It can only occur during these two activities:
● When generating *.hist files from *.stat files.
● When the job configuration editor is in use.
484 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 485
Failed to initialize keyboardAt start of Agent API, the system keyboard did not initialize.
Description
For both the graphical user interface (GUI) and the character-based interface to the agent API, the system checks at startup for an initialized keyboard.
486 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 487
Failed to open directory <dir_name>An operation tried to open a directory and failed.
Description
An operation tried to open a directory and failed.
488 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 489
Failed to read file headerA process was unable to read the file header of a file.
Description
A shadow job process was unable to read the file header of an inbound calling list.
Resolution
To resolve this issue, follow these steps:
1. Inspect the calling list in use when the error occurred.
2. Repair the file header as necessary.
3. Retry the shadow job activity that created the error message.
490 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 491
Failed to initialize switcherThe system failed to establish communications with the switch.
Description
The system failed to establish communications with the switch.
492 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 493
Fail to load recordWhen editing calling lists, the user attempts to access a record and the record does not load.
Description
When editing calling lists, the user attempts to access a record and the record does not load.
494 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 495
Fatal error on select - <num>Agent tried to select job <num> and got a fatal error.
Description
An agent tried to select job <num> and got a fatal error. The agent child process supporting the client session is terminating.
496 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 497
Field name <name> is invalidThe named field name is not allowed.
Description
A call strategy process has encountered a field name that is invalid.
498 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 499
Invalid field value <value>The named value for a field is not allowed.
Description
A call strategy process has encountered a named value for a field that is invalid.
500 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 501
Missing or invalid entry in fileA process opens a file and a critical entry is missing or invalid.
Description
This error occurs when a process opens a file to get a parameter value and the parameter is either missing or invalid. In most cases the process is looking for a value in master.cfg. The master.cfg values most often looked for are:
● ARCHIVE_DIR
● DIALERID
● LINEASSIGN
● MAXHIDSLOTS
● MAXPHONE
● MAXCMPCODE
● PORTS
The error may also occur when the process tries to access a environment variable such as TZ, timezone. All the Avaya Proactive Contact environment files are defined in the $VOICEDIR/shell/envfile configuration file.
This error can occur when the process tries access other parameters from other configuration files, but the ones listed above are the most common cause of the error.
502 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 503
File <filename> exists, but is not readable by user <user_name
A process cannot read an existing file.
Description
This error occurs when a process attempts to read a file, but the process owner does the have file permissions to read the file. It almost always is an indication of another, deeper, problem.
504 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 505
File <filename> exists, but cannot be written by user <user_name
A process cannot write to an existing file.
Description
This error occurs when a process attempts to write to a file, but the file permissions do not permit that user to write to the file. Almost always this indicates a deeper problem.
506 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 507
File <filename> does not existA process tried to access a file that does not exist.
Description
A process tried to access a file that does not exist. In many instances of this error message the process is trying to access an archive file.
This error appears as "Invalid job name" when starting jobs.
508 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 509
File did not closeA process has left a file open that needs to be saved.
Description
This error is only generated by dialer service processes.
510 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 511
No space on file systemThe file system is full.
Description
This error can occur when creating an index for use by a caller or when using readtape and writetape. Whether accessing a hard disk, CD-ROM or tape media, this error indicates the media is full.
512 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 513
Unequal phone number field lengths in file <name>A process attempts to read a number written in string format in a file and is unsuccessful.
Description
A process is trying to read a number in string form in a file such as callselnum and encounters phone numbers of unequal length.
514 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 515
Field value not in acceptable listA value in a comma delimited list is not allowed in the list.
Description
An agent has created a comma delimited list with an invalid entry.
516 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 517
Entry <value> missing/invalid in <filename> fileA process tried to read a value from a file and <value> is either missing or invalid.
Description
A process tried to read a <value> from <filename> and <value> is either missing or invalid. This error can occur in many different situations. The first entry in the actual error message should contain some context of the error.
518 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 519
Gap found between selection criteria linesWhen setting up call strategies, a gap exists in the selection criteria.
Description
When setting up call strategies, a gap exists in the selection criteria.
520 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 521
Headset <id_num> not specified in dgswitch.cfg fileThe operator process while in test mode, encounters a headset number ID that is not in the dgswitch.cfg file.
Description
The operator process while in test mode, encounters a headset number ID that is not in the dgswitch.cfg file.
522 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 523
Headset port number <num> out of range A process accessed switch information concerning headsets and encountered a headset with a port number out of range.
Description
A process accessed switch information concerning headsets and encountered a headset with a port number out of range. The $VOICEDIR/config/dgswitch.cfg file contains the valid port ranges.
524 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 525
<agent_name> - Exceeded operator slots available, MAXOPS is low
The <agent_name> logon exceeds the Avaya Proactive Contact system limit on the number of agents.
Description
The <agent_name> logon exceeds the Avaya Proactive Contact system limit on the number of agents. MAXOPS is the number of headset ID slots. The number of agents is limited by the number of slots for headsets available on the switch. This limit is a physical restraint on the number of agents.
Note:Note: This error can occur if client sessions for the agent application are left running on
Avaya Proactive Contact after an agent workstation crashes.
526 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 527
Inbound agents only permittedAn agent other than an inbound agent tried to access an inbound job.
Description
An agent other than an inbound agent tried to access an inbound job.
528 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 529
Invalid answer delay timeA process while adding localization information to the in-memory database encountered an invalid answer delay time.
Description
A process while adding localization information to the in-memory database encountered an invalid answer delay time.
530 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 531
Invalid call detection mode <name>A call detection setting in the call strategy files contains an invalid name.
Description
A call detection setting in the call strategy files contains an invalid name. This setting tells the system which calls to pass to agents. It can have the following values:
● Voice
● Autovoice
● Intercept
● No circuit
● Disconnect
● Vacant
● Reorder
Resolution
To resolve this issue, follow these steps:
1. Most likely the offending setting is in the call strategy settings. Find the value for the keyword, E_STRATEGY in jobEventData. The value is the name of the Call Strategy file which is typically in the $VOICEDIR/callsel directory. If it is not there, the CALLSEL keyword in $VOICEDIR/etc/master.cfg to determine the correct directory.
2. Inspect the all detection settings in the jobEventData file for invalid entries.
3. Correct any invalid entries you find.
4. Rerun the process that generated this error message.
You can also use Supervisor to make these corrections:
5. From the Supervisor Main menu, select Campaign > Strategy >Edit a phone strategy
6. See Using Supervisor for more information.
532 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 533
CSTAUniversalConfEvent for call monitor, error = 24There is no active call because an application has sent an invalid call identifier.
Description
There is no active call because an application has sent an invalid call identifier. The call identifier is a numeric string of 18 digits. The system generates a call identifier in the following instances:
● A job initiates an outbound call
● .A job checks for an inbound call on an inbound trunk
● .An agent initiates a manual call
● .An agent initiates a field call
● .An agent initiates a transfer
In most cases of this error, the call does not exist or has been cleared.
534 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 535
Invalid format character foundAgent entered a date with an invalid format character.
Description
Agent entered a date with an invalid format character. The agent either entered a date with a slash (/) versus backslash (\) or in the time format used colons or other extra characters.
536 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 537
invalid channel number <string>An agent tries to talk directly to the switch/porter and uses an invalid channel number, <string>.
Description
An agent tries to talk directly to the switch/porter and uses an invalid channel number, <string>.
538 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 539
Invalid DAA typeA process while adding localization information to the in-memory database encountered an invalid DAA type.
Description
A process while adding localization information to the in-memory database encountered an invalid DAA type.
540 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 541
Invalid date formatIncorrect date format used.
Description
The code that generated this error message requires a date in the correct format. The required date format is ccyy/mm/dd.
542 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 543
Invalid delay specificationA process accessed the time between recalls and found an invalid delay specification.
Description
A process accessed the time between recalls and found an invalid delay specification.
544 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 545
Invalid file nameThe requested or supplied file name is not valid.
Description
Although many operations in Avaya Proactive Contact require specific file names, only a select few return this error message. This error occurs during the following activities:
1. Creating an index by searching a calling list for records with a specified criteria.
2. Preparing a calling list report.
3. Creating a distribution list of data in a calling list.
4. Displaying a file�s content on the screen.
546 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 547
New password entered is invalidAn agent is trying to create a new password and entered an invalid password.
Description
An agent is trying to create a new password and entered an invalid password.
548 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 549
Invalid offhook retry delayWhile a process is adding localization information for a calling list into the memory database, it finds a phone number with a invalid offhook retry delay.
Description
While a process is adding localization information for a calling list into the memory database, it finds a phone number with a invalid offhook retry delay.
550 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 551
Invalid phoneWhen an agent is trying to set up recalls, the system checks that the phone number is valid and finds one that is not.
Description
When an agent is trying to set up recalls, the system checks that the phone number is valid and finds one that is not.
If this error occurred when using a process initiated using the Agent API, the telephone field index does not fall in the range returned by AGTListCallbackFmt for the customer record. In this case retry the process with a value between 1 and the AGTListCallbackFmt value.
552 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 553
Invalid phone <number> While using a call strategy or setting up recalls, a process finds a listed invalid phone number.
Description
While using a call strategy or setting up recalls, a process finds a listed invalid phone number.
554 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 555
Invalid phone number lengthSystem finds a phone number with an invalid length.
Description
While the system is entering locale information into memory, it encounters a phone number with an invalid length.
556 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 557
Invalid phonestat - <status>Invalid recall telephone selected.
Description
The telephone number specified by the <index> parameter is not valid. The <status> value is B, T, or Z. B indicates a bad telephone number, T indicates the phone number belongs to an unknown time zone, and Z indicates that the recall time is invalid in the time zone.
558 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 559
Original password is invalidThe entered password is invalid.
Description
An agent when logging in, enters an invalid password.
560 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 561
Invalid patternA process tries to use a pattern as criteria for record selection and the pattern is invalid.
Description
A process tries to use a pattern as criteria for record selection and the pattern is invalid.
562 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 563
Invalid recall code <code>A recall setting is not recognized by the system.
Description
When selecting records from a calling list, the user can mark entries for recall or choose a field with a specified value to mark the call for recall. To generate this error message, the value encountered is not a legitimate value for marking a call for recall or is not recognized a good value for a specific field.
564 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 565
Invalid response from operator monitor processThe opmon process reported that an agent monitoring process returned an invalid response concerning headsets.
Description
The opmon process reported that an agent monitoring process returned an invalid response concerning headsets.
566 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 567
Invalid range characterWhen converting a calling list to std_to_dialfmt, the length of a standard phone number for the specified country contains an invalid character.
Description
When converting a calling list to std_to_dialfmt, the length of a standard phone number for the specified country contains an invalid character.
568 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 569
Invalid ring count <num>A ring count setting in the call strategy files contains an invalid number.
Description
A ring count setting in the call strategy files contains an invalid number.
570 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 571
Invalid time zone character <char>A time zone setting in the call strategy files contains an invalid character.
Description
A time zone setting in the call strategy files contains an invalid character.
572 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 573
Invalid use of ALL phone numbers specificationThe ALL parameter appears in the locale.cfg file as an invalid entry.
Description
As the system processes a calling list performing the change of phone numbers to standard to dial format, it uses parameters in the phonefmt.cfg some of which come from the local.cfg file. The ALL entry can be used in some cases in locale.cfg, but not all.
574 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 575
Invalid VM2 locale codeA process is adding a line of localization code t0 memory and encounters an invalid VM2 locale code.
Description
A process is adding a line of localization code t0 memory and encounters an invalid VM2 locale code.
576 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 577
Invalid wait limitWhile a process is adding localization information for a calling list into the memory database, it finds a phone number with a invalid wait limit.
Description
While a process is adding localization information for a calling list into the memory database, it finds a phone number with a invalid wait limit.
578 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 579
Failed to invoke functionA process tried to start a function and failed.
Description
In most cases, this error occurs during record selection or the creation of phone strategy when a process tries to spawn a child process.
580 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 581
IPC - invalid input argumentWhen the system was creating the inter-process communication module (IPC), it encountered an invalid input argument.
Description
When the system was creating the inter-process communication module (IPC), it encountered an invalid input argument.
582 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 583
IPC - invalid ipc entryWhile sending a message to the ipc queue, the system determines that the message has invalid content.
Description
While sending a message to the ipc queue, the system determines that the message has invalid content.
584 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 585
Invalid ipc number <num>A process sent or received an ipc message that has a invalid ipc number.
Description
A process sent or received an ipc message that has a invalid ipc number.
586 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 587
<process_name> - Accessing bad semaphoreThe <process_name> process in trying to use an IPC message, encountered a bad semaphore.
Description
The <process_name> process in trying to use an IPC message, encountered a bad semaphore.
588 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 589
<process_name> - Failed to open semaphore, err(<num>)The <process_name> process while attempting an IPC message, failed to open a semaphore.
Description
The <process_name> process while attempting an IPC message, failed to open a semaphore.
590 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 591
<process_name> - Failed on semaphore operation, err <err_num> key = <sem_key_id> code = <op_code>
The <process_name> process attempted an IPC message semaphore operation and failed.
Description
he <process_name> process attempted an IPC message semaphore operation and failed. The error message includes the name of the process involved, the semipro key ID and the op code.
592 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 593
<process_name> Failed on semaphore removal, err=<num> key=<num>
The <process_name> tried to remove a semaphore associated with IPC messaging and generated this error that includes the semaphore id as key=<num>.
Description
The <process_name> tried to remove a semaphore associated with IPC messaging and generated this error that includes the semaphore id as key=<num>.
594 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 595
IPC - Failed to open opmon message queueA process tried to open an ipc message queue with opmon and could not open the queue.
Description
A process tried to open an ipc message queue with opmon and could not open the queue.
596 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 597
Response message too longAn ipc response message is too long and therefore not sent.
Description
An ipc response message is too long and therefore not sent
598 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 599
IVR_SCRIPT is blank in job <name>During a pool job for interactive voice response agents, an IVR script is empty.
Description
The error message names the pool job that encountered a empty IVR script.
600 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 601
Failed to create jobmon graphical user interface (GUI)The job monitor�s GUI is missing some elements.
Description
When the job monitor GUI is created, either the menu bar, the job monitor window or the status bar is missing.
602 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 603
Job <name> not runningAn agent tried to access a job that is not running.
Description
An agent tried to access a job that is not running.
604 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 605
Job <name> is not valid for IVR agentsThe named job is not valid for IVR agents.
Description
The named job is not valid for IVR agents. Any job file has a set of IVR parameters, including the Allow IVR agents on job parameter. If this parameter is set to NO, IVR agents cannot access the job.
606 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 607
Error loading job chainSystem attempts to load a job chain and next slot is already taken.
Description
System attempts to load a job chain and next slot is already taken.
608 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 609
Attempt to store list_client on host failedThe attempt to store the list_client in slot failed.
Description
The _lcCreateXfd failed in its attempt to store the list_client in a slot on a local or remote host.
610 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 611
Line not releasedA line is use by agent was not released.
Description
A line used by agent was not released upon completion of calls.
612 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 613
Mastercfg errorThe master.cfg file is either missing an entry or an entry has an invalid value.
Description
The master.cfg value contains critical variables for Avaya Proactive Contact processes. Missing or invalid entries in master.cfg can cause the system to malfunction.
The master.cfg entries that most often cause this error are:
● ARCHIVE_DIR
● CALLSEL
● CONNABBREV
● CONNCRIT
● DATEFORM
● MAXCMPCODE
● MAXPHONE
● PORTCOEF
● PORTS
614 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 615
Failed to determine max number of phonesThe MAXPHONE keyword in the $VOICEDIR/etc.master.cfg file is not set.
Description
The MAXPHONE keyword in the $VOICEDIR/etc.master.cfg file is not set. The MAXPHONE keyword sets the maximum number of phone numbers in a calling list.
616 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 617
Unable to remove message queueA process was unable to remove the IPC message queue.
Description
During IPC communication with opmon, a process attempted to remove the IPC message queue and could not.
618 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 619
Missing delay specificationA process accessed the time between recalls and did not find the delay specification.
Description
A process accessed the time between recalls and did not find the delay specification.
620 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 621
Missing high rangeWhen converting a calling list to std_to_dialfmt, the length of a standard phone number for the specified country is missing the high limit for values given in locale.cfg.
Description
When converting a calling list to std_to_dialfmt, the length of a standard phone number for the specified country is missing the high limit for values given in locale.cfg.
622 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 623
Missing completion codeA process working with recalls did not find a completion code.
Description
A process working with recalls did not find a completion code. Recalls use the local.cfg file RECALLLIMIT keyword to determine the completion code.
624 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 625
Missing line typeA process is looking at the standard to dial format in phonefmt.cfg and cannot find the line type.
Description
The line type is missing from the standard to daily format in phoenfmt.cfg. The line types are REG (regular), INBND (inbound), OTHER, or ALLTYPES.
626 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 627
Missing or invalid num of chars to stripA process is looking at the standard to dial format in phonefmt.cfg and cannot find the strip argument is either missing or invalid.
Description
The strip argument is either missing or invalid in the standard to dial format in phonefmt.cfg. The strip argument designates the number of digits to strip from the standard phone number when the prefix is applied.
628 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 629
Missing phone numbersAs the system processes a calling list performing the change of phone numbers to standard to dial format, the calling list is missing phone numbers.
Description
As the system processes a calling list performing the change of phone numbers to standard to dial format, the calling list is missing phone numbers.
630 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 631
Missing prefixA process is looking at the standard to dial format in phonefmt.cfg and cannot find the prefix.
Description
The prefix is missing from the standard to dial format in phonefmt.cfg. The prefix is known as the exchange.
.
632 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 633
Missing limitA process is working with recalls and is missing a recall delay limit.
Description
A process is working with recalls and is missing a recall delay limit.
634 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 635
Missing suffixA process is looking at the standard to dial format in phonefmt.cfg and cannot find the suffix.
Description
The suffix is missing from the standard to dial format in phonefmt.cfg. The suffix, which is added to the end of the phone number must be 12 characters or less.
636 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 637
Missing or invalid low rangeWhen converting a calling list to std_to_dialfmt, the length of a standard phone number for the specified country is either missing or does not match the low limit value given in locale.cfg.
Description
When converting a calling list to std_to_dialfmt, the length of a standard phone number for the specified country is either missing or does not match the low limit value given in locale.cfg.
638 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 639
Missing or invalid reject phone number patternThe locale.cfg file does not contain a valid or is missing a reject number pattern for a particular country.
Description
The locale.cfg file does not contain a valid or is missing a reject number pattern for a particular country.
640 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 641
Missing or invalid time zone designationThe system found a phone number with a bad or missing time zone designation.
Description
While checking a phone number in standard_to_dial format, the system found a phone number with a bad or missing time zone designation.
642 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 643
Missing time zone specification for country <num>While checking a phone number in calling list form, the system finds the country without the time zone specified.
Description
While checking a calling list, the system finds a country without the time zone specified.
644 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 645
MakeCall/MakePredictiveCall/TransferCall Confirm error (33)
The dialer is trying to make or transfer a call and cannot.
Description
The swif_ct is trying to make or transfer a call in within Avaya Proactive Contact with CTI and the agent extension is busy.
646 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 647
<type> agents are not permitted on this jobA <type> agent attempted to log on to a job that does permit more agents of that <type>.
Description
A <type> agent attempted to log on to a job that does permit more agents of that <type>. The $VOICEDIR/etc/master.cfg file keyword, OPLIMIT controls the number of <type> agents allowed on a job.
648 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 649
Must specify transfer jobAgent did not specify a job name for a call transfer.
Description
An agent must specify a job name to use to transfer calls during inbound and blend jobs.
650 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 651
Failed to attach shared memoryA process failed to attach to a segment of shared memory.
Description
Shared memory structures are used for headsets among other things. This error message is usually generated by processes involved with headsets or other communication processes.
652 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 653
Cannot open channel to operator monitor processA supervisor is trying to monitor an agent�s headset and cannot reserve the agent headset ID.
Description
A supervisor is trying to monitor an agent�s headset and cannot reserve the agent headset ID or an agent cannot adjust headset speaker or ear volumes.
654 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 655
Failed to detach shared memoryA process failed to detach a segment of shared memory.
Description
Shared memory structures are used for headsets among other things. This error message is usually generated by processes involved with headsets.
656 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 657
No DONE_TME settingThe job file does not contain the DONE_TME field.
Description
The job file does not contain the DONE_TME field. The DONE_TIME field, used for testing, has a value of YES to allow a test agent to complete work after each call and NO does not permit that time.
658 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 659
Failed to find linked job fileA process cannot find a job file identified as a linked job.
Description
A process cannot find a job file identified as a linked job.
660 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 661
Unable to open keys fileAn application cannot open because it cannot create the necessary command keys for its screen.
Description
When creating the screen for applications, the key file defines the command keys. An application cannot open because it cannot create the necessary command keys for its screen.
662 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 663
Failed to get message queueA process was unable to access the message queue.
Description
During IPC communication with opmon, a process attempted to access the message queue and could not.
664 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 665
Unable to receive a messageA process was unable to receive an IPC message.
Description
During IPC communication with opmon, a process attempted to receive an IPC message and could not.
666 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 667
Failed to send messageA process was unable to send a IPC message.
Description
During IPC communication with opmon, a process attempted to send an IPC message and could not.
668 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 669
No more recordsWhen editing calling lists, the user attempts to access the next record when no more records exist.
Description
When editing calling lists, the user attempts to access the next record when no more records exist.
670 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 671
Field has non-numeric valueAn agent has entered a non-numeric value in a field that only accepts numeric entries.
Description
An agent has entered a non-numeric value in a field that only accepts numeric entries.
672 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 673
No previous recordWhen editing calling lists, the user attempts to access a previous record when no previous record exists.
Description
When editing calling lists, the user attempts to access a previous record when no previous record exists.
674 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 675
Failed to process file <filename>A process could not open the <filename> file.
Description
A process could not open the <filename> file. The error message should include the name of the process that failed to open the file.
676 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 677
Cannot be DONE from alternate screenAn agent has completed a call and enters DONE from the wrong screen.
Description
An agent has completed a call and enters DONE from the wrong screen. If the agent does not enter DONE from the current screen, data about the call is not stored. So, agent must enter DONE from current screen.
678 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 679
Non-directory in directory pathA path contains at least one child that is not a directory.
Description
A process tried to create a directory in a path that contains at least one child that is not a directory.
680 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 681
<process_name> failed to read from file <filename>The named process could not read the named file.
Description
The named process could not read the named file.
682 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 683
Recall not allowed for inbound callAn agent tried to set up a recall for an inbound call.
Description
An agent tried to set up a recall for an inbound call. Recalls are not permitted for inbound calls.
684 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 685
No record foundDuring a Avaya Proactive Contact system search for a previous record, no record is found.
Description
During a Avaya Proactive Contact system search for a previous record, no record is found.
686 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 687
No REL_DIST settingThe job file does not contain the REL_DIST field.
Description
The job file does not contain the REL_DIST field. The REL_DIST field, used for testing, has a value of YES for released versions of Avaya Proactive Contact and NO for unreleased versions.
688 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 689
No REL_TME settingThe job file does not contain the REL_TME field.
Description
The job file does not contain the REL_TME field. The REL_TME field, used for testing, has a value of YES for wait to release test call and NO for to release test call immediately.
690 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 691
Failed to remove shared memoryA process failed to remove a segment of shared memory.
Description
Shared memory structures are used for headsets among other things. This error message is usually generated by processes involved with headsets.
692 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 693
Sales verification with unit work lists is not permittedAn agent tried to do sales verification with a unit work list.
Description
Since sales verification and unit work lists are both peer types of outbound jobs, you cannot do sales verification with unit work lists.
694 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 695
Missing std to dial phone number formatA job is attempting to make calls from a calling list and finds a phone number that is not in standard to dial format.
Description
A job is attempting to make calls from a calling list and finds a phone number that is not in standard to dial format. This is a common error.
696 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 697
Not a calling listDuring a data transfer, the process expects a calling list and the file accessed is not a calling list.
Description
This error occurs during data transfer. If the error occurs during a readtape action, the error message should mention readtape.
698 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 699
Unable to become root privilege for setting passwordAn agent tried to set a password but did not have root privileges.
Description
An agent tried to set a password but did not have root privileges.
700 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 701
Cannot find time zone for phone numberA process is checking telephone numbers in standard format and cannot find the time zone designation for a number.
Description
A process is checking telephone numbers in standard format and cannot find the time zone designation for a number.
702 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 703
Failed to create window pointerWhen constructing the GUI, the system did not create a window pointer.
Description
When constructing the GUI, the system did not create a cursor.
704 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 705
Failed to write to file <filename>A process attempted to write to a file and failed.
Description
A process attempted to write to a file and failed. frequently the process is attempting to copy the contents of a buffer into a file when this error message occurs.
706 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 707
Only outbound agents permitted by sales verificationA non-outbound agent tried to join a sales verification job.
Description
Sales verification jobs can only be done by outbound agents.
708 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 709
Outbound or Managed agents only permittedAn agent that was not an outbound or managed agent tried to join this job.
Description
The current job requires outbound or managed agents. An agent who is neither type tried to join this job.
710 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 711
<opname> operation failedThe named operation did not complete successfully.
Description
The named operation did not complete successfully. This error usually occurs when the listserver binary attempts to start the callsel binary.
712 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 713
<op_name> operation failed for file <file_name>The named operation on the named file did not complete successfully.
Description
A process tried to complete an operation, often a read or write, on a file and was unsuccessful.
714 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 715
<string><string>- Operator number returned wrong <num1>, job number <num2>
An operator slot could not be released.
Description
An operator slot could not be released.
716 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 717
Operator slot semaphore not availableA process tries to access the operator slot base in shared memory and cannot.
Description
A process tries to access the operator slot base in shared memory and cannot. This error can occur when accessing the operator slot base or releasing it.
718 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 719
Headset value (<headset_value>, <return_value>) out of bound
When the operator process is running in test mode, a headset value is encountered that is not within the prescribed headset values.
Description
When the operator process is running in test mode, a headset value is encountered that is not within the prescribed headset values
720 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 721
Outbound agents only permittedAn agent other than an outbound agent tried to access an outbound job.
Description
An agent other than an outbound agent tried to access an outbound job.
722 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 723
Pattern error at line <number>A process is running a script and finds a pattern error in the script at line number <num>.
Description
A process is running a script and finds a pattern error in the script at line number <num>.
724 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 725
Pattern errorA process needs to make a selection of data and the pattern used for the selection contains an error.
Description
A process needs to make a selection of data and the pattern used for the selection contains an error. This error can occur reading and writing tapes, selecting fields from a record, and other areas where a selection criteria in the form of a pattern is used. The error message references the code that generated the error message.
726 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 727
Telephone line not availableA telephone line is not available.
Description
A telephone line is not available for the agent�s current activity. The agent activity may be:
a. Trying to hang up a call, but there is no call to hang up.
b. Trying to place a call on hold and there is no open telephone line to place on hold.
c. Transferring a call and Avaya Proactive Contact does not have a telephone line available to place the transfer call.
d. Dialing preview (no telephone line available). This message results when Avaya Proactive Contact is placing the preview call.
e. Performing a recall scheduled for current date and time, but no telephone line is available to place the outbound call.
f. While there was a call on hold, it is not available to restore. The customer hung up while on hold.
728 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 729
Telephone line not offhookAn agent tried an activity that required an offhook phone and the phone was not off hook.
Description
An agent tried an activity that required an offhook phone and the phone was not off hook. The agent was trying to do one of the following activities:
● Adjust the headset volume and has an open telephone line that is on hold.
● Place a call on hold while there is an open telephone line, there is no call to place on hold. This message may mean the agent has already placed the call on hold.
● Transfer a call and there is no call to transfer.
● Take a call off hold and there is no call on hold.
730 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 731
Phone number too longIn converting a calling list phone number to the standard to dial format, the length of the telephone number becomes too long.
Description
In converting a calling list phone number to the standard to dial format, the length of the telephone number becomes too long.
Resolution
To resolve this issue, follow these steps:
1. Open the calling list that generated the error.
2. Inspect the phone numbers for irregularities.
3. Shorten any abnormally long phone numbers.
4. Rerun the process.
732 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 733
Timed out waiting for response from porterWhile an agent was manually making calls, the screen failed to display the number, because porter timed out.
Description
While an agent was manually making calls, the screen failed to display the number, because porter timed out.
734 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 735
Password can not be changed, change limit not expiredAn agent attempted to change a password and could not.
Description
An agent attempted to change a password and could not because the default time limit for password changes had not been reached.
736 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 737
Preview record search failed to initializeThe preview record search (pvrs) failed to initialize.
Description
The preview record search (pvrs) failed to initialize. Note that several conditions must be met before pvrs runs successfully. Consult the pvrs_helpers.c source code for more information.
738 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 739
Changes to record not savedAn agent made changes to a record that were not saved.
Description
An agent made changes to a record that were not saved. It may be that the record was locked so that changes could not be made.
740 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 741
Recall can't be less than <num> minutesA recall cannot be less than <num> minutes from the current time.
Description
A agent has tried to set up a recall that is less than the number of minutes allowed. This recall limit is set by the RECALLLIMIT entry in the locale.cfg file.
742 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 743
Range does not come after previous rangeA process accessed the recall attempt range and found an error in the attempt range parameter.
Description
A process accessed the recall attempt range and found an error in the attempt range parameter.
744 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 745
Recall time and date outside timezoneRecall time is outside the limits for the time zone.
Description
The recall time setting is for the Avaya Proactive Contact system time. However, the telephone to recall is in a different time zone. In that time zone, the recall time setting is outside the legal boundaries for placing calls to customers.
746 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 747
Record is no longer availableA process tried to access a record that is no longer available.
Description
A process tried to access a record that is no longer available. In most cases the process is either a call transfer or involves editing a record.
748 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 749
Record currently in useA call strategy process tired to access a record, but it was in use by another process.
Description
A call strategy process tired to access a record, but it was in use by another process. This means the file is locked by the other process.
750 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 751
Rejected phone number (L<num>)A process is checking phone numbers in a calling list and rejects the phone number on line <num> when comparing it to the standard phone number for the list.
Description
A process is checking phone numbers in a calling list and rejects the phone number on line <num> when comparing it to the standard phone number for the list.
752 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 753
Field entry is requiredAn agent has left a required field on a screen blank.
Description
An agent has left a required field on a screen blank.
754 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 755
Route End Error: RegReqID = <num>, CrossRefID = <num>, Error = <num>
For some reason the route end is not available.
Description
This error message has two distinct variations:
1. Route End Error: REqREqID??=1, CrossRefID??=70585, Error = 33
Avaya Proactive Contact with CTI uses an extension to an announcement port on the switch to play voice messages and this is not set up.
2. Route End Error: REqREqID??=1, CrossRefID??=12661, Error = 14
A CTI process encountered a invalid destination address.
756 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 757
Report failed, system out of spaceA process was attempting to create a report and ran out of disk space.
Description
A process was attempting to create a report and ran out of disk space.
758 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 759
Molocale - unknown language name <lang>During language localization, the language provided as a secondary language for display is unrecognized.
Description
The LANG_SECONDARY keyword in the $VOICEDIR/etc/master.cfg file is set to an unrecognized language.
760 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 761
Selection list not available for useA client application has tried to start one or more jobs and was unsuccessful.
Description
A client application has tried to start one or more jobs and was unsuccessful. The process could not use the record selection list for one or more jobs because it was unavailable.
762 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 763
Could not verify selection list for jobA client application has tried to start one or more jobs and was unsuccessful.
Description
A client application has tried to start one or more jobs and was unsuccessful. The process could could not verify the record selection list for the job. This error occurs if the new list download has happened after the selection was run.
764 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 765
Selection list not created with this calling listA client application has tried to start one or more jobs and was unsuccessful.
Description
A client application has tried to start one or more jobs and was unsuccessful. The selection list in use was not created with this calling list.
766 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 767
Could not verify selection list for jobA client application has tried to start one or more jobs and was unsuccessful.
Description
A client application has tried to start one or more jobs and was unsuccessful. The process could could not verify the record selection list for the job. This error occurs if the new list download has happened after the selection was run.
Resolution
To resolve this issue, rerun the selection.
768 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 769
Cannot find service in /etc/servicesA process attempts to find the IP address of a service and the service does not exist.
Description
A process attempts to find the IP address of a service and the service does not exist. This error occurs in a module that provides functions to FileStore, Directory and DateGenerator functions elsewhere in the code.
770 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 771
Caught signal number <num>Many different processes generate this error.
Description
Many different processes generate this error.
772 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 773
Caught signal <num> and terminatedA process got a signal <num> and terminated.
Description
The error message identifies the process that terminated and the signal number that caused the termination.
774 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 775
Socket call failedA server process attempted to accept a client connect request and the socket request failed.
Description
A server process attempted to accept a client connect request and the socket request failed. This error occurs in a module that provides functions to FileStore, Directory and DateGenerator functions elsewhere in the code.
776 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 777
Unable to setup listen on socketA server process attempted to accept a client connect request and cannot set up to listen on the socket.
Description
A server process attempted to accept a client connect request and cannot set up to listen on the socket. This error occurs in a module that provides functions to FileStore, Directory and DateGenerator functions elsewhere in the code.
778 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 779
Socket failedA socket for a connection to a server failed.
Description
While trying to access a calling list, a socket for a connection to the server hosting the calling list failed.
780 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 781
Socket connection to list server running on <name> failedA socket connection to a list server running on the named server failed.
Description
While trying to access a calling list, a socket connection to a list server running on the named server failed.
782 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 783
STATUSFLAG field missingThe current record does contain a STATUSFLAG field.
Description
During an attempt to mark a record as do not call, the system did not find a STATUSFLAG field in the record.
784 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 785
Failed to process line (<line_buffer_name>)As a process attempts to read the switch configuration file, it cannot process a line of the file.
Description
As a process attempts to read the switch configuration file, it cannot process a line of the file.
786 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 787
tget returned error number <num> raising signal <num>The user typed input that causes the system to terminate.
Description
The user typed input that causes the system to terminate.
788 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 789
<string>-<string>This error message identifies the process that generated the error message and the object of the process.
Description
This error message identifies the process that generated the error message and the object of the process.
790 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 791
Timed out waiting for <string> confirmationA process, waiting for an IPC message reply, times out.
Description
A process, waiting for an IPC message reply, times out.
792 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 793
Calling list <name> is not in shared memoryA calling list/dictionary <name> is being processing and the calling list/dictionary cannot be loaded into shared memory.
Description
A calling list/dictionary <name> is being processing and the calling list/dictionary cannot be loaded into shared memory.
794 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 795
Calling list line count does not match shared memoryWhile processing a calling list, the system determines that the calling list line count does not match the shared memory version.
Description
While processing a calling list, the system determines that the calling list line count does not match the shared memory version.
796 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 797
Invalid normal trunk equipment number <num> A process accessed a trunk number for a headset or other equipment and found an invalid value.
Description
A process accessed a trunk number for a headset or other equipment and found an invalid value.The $VOICEDIR/config/dgswitch.cfg file contains the accepted trunk port numbers.
798 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 799
Normal trunk port number <num> out of rangeA process accessed the trunk port numbers and found an out of range value.
Description
A process accessed the trunk port numbers and found an out of range value. The $VOICEDIR/config/dgswitch.cfg file contains the accepted trunk port numbers.
800 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 801
Unable to bind to local addressA server process attempted to accept a client connect request and cannot bind to the local address.
Description
A server process attempted to accept a client connect request and cannot bind to the local address. This error occurs in a module that provides functions to FileStore, Directory and DateGenerator functions elsewhere in the code.
802 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 803
Unable to accept connection on socketA server process attempted to accept a client connect request and cannot accept connection on the socket.
Description
A server process attempted to accept a client connect request and cannot accept connection on the socket. This error occurs in a module that provides functions to FileStore, Directory and DateGenerator functions elsewhere in the code.
804 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 805
Unable to access host <name> using nameA process tried to unsuccessfully access a host using its name.
Description
A process associated with calling lists tried to unsuccessfully access a host using its name. If the process is trying to establish a connection with the list server on the server identified in the list client host_name, it uses the default LSERVPORT value for the server.
806 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 807
Unable to connect to socketA client process attempted to connect to a server and cannot connect to the socket on the server.
Description
A client process attempted to connect to a server and cannot connect to the socket on the server. This error occurs in a module that provides functions to FileStore, Directory and DateGenerator functions elsewhere in the code.
808 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 809
Failed to create directoryA process attempted to create a directory and failed.
Description
This error can occur in a wide range of circumstances. The error message contains the name of the directory that could not be created.
810 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 811
Failed to read calling list definitionA process tried to read a calling list definition and failed.
Description
A process tried to read a calling list definition and failed. This error message can occur in a wide range of circumstances.
812 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 813
Unable to open list <calling_list_name>A process tried to unsuccessfully open the named calling list.
Description
A process tried to unsuccessfully open the named calling list.
814 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 815
Process unable to send <string> to <process_name>A process needs to send a string to another process and cannot.
Description
A process needs to send a string to another process and cannot. The error message names both processes and the string.
816 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 817
Unable to send data to socketA process attempted to send data to a socket and the connection is gone.
Description
A process attempted to send data to a socket and the connection is gone. This error occurs in a module that provides functions to FileStore, Directory and DateGenerator functions elsewhere in the code.
818 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 819
Molocale - failed to set locale <name>The system is trying to set a language for a locale and cannot.
Description
The system is trying to set a language for a locale and cannot.
820 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 821
Call blending is not availableAn agent is trying to log on to dispatcher for call blending when call blending is not available.
Description
An agent is trying to log on to dispatcher for call blending when call blending is not available. The dispatcher process acquires and releases agents for outbound calling. Dispatcher is the sole interface between the Agent Blending system and the outbound calling system.
822 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 823
Unequal phone number field lengths in file <filename>A process is reading the file <filename> and finds unequal phone number lengths.
Description
A process is reading the file <filename> and finds unequal phone number lengths. The function that generates this error is used to read a file such as. callselnum that contains numbers in text string form.
824 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 825
Unknown Command message - <command><command> is the text string that the agent binary received as the command and did not recognize.
Description
The error typically occurs when an API call contains an undefined command.
826 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 827
Unknown IPC message - <string>While processing IPC messages, the system encounters <string> that is not a known IPC message.
Description
While processing IPC messages, the system encounters <string> that is not a known IPC message.
828 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 829
Incorrect job typeAgent command issued with an unknown job type.
Description
This error most likely occurred while executing the AGTListJobs API call. The job types are
● (A) all
● (I) inbound
● (B) blend
● (M) Managed Dialing
● (O) outbound, including Unit Work List and Sales Verification
830 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 831
Unknown screen typeAn agent is attempting to use a screen type that is unknown to the system.
Description
An agent is attempting to use a screen type that is unknown to the system. Screen types are defined in *.init files.
832 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 833
Unit value not found, or unavailableA unit work list was not found.
Description
An agent attempted to attach to a unit work list that either did not exist or was in use.
834 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 835
Linking between virtual agent jobs and non-virtual jobs is not permitted
In an effort to link one job to another, one job is virtual and the other is non-virtual.
Description
When linking two agent jobs, both jobs must be either virtual or non-virtual. This error occurs when one job is virtual and the other is non-virtual which nullifies the requested link.
836 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 837
Unable to open fileCalling code cannot open specified file.
Description
This error is one of the most common errors displayed by Avaya Proactive Contact. However, in almost all cases, the error message contains the name of the process that generated the error code and the name of the file that the process could not open.
838 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 839
Failed to find screen <name>System could not display Window�s application <name> screen.
Description
System could not display Window�s application <name> screen. This error occurs when trying to load the information held in shared memory.
840 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 841
Write errorAn attempt to write to a file generated an error.
Description
This error can occur for a variety of these reasons:
● In writing a calling list, the error message tells you that the process wrote one value when another was expected.
842 Maintenance and Troubleshooting Guide March 2008
Maintenance and Troubleshooting Guide March 2008 843
Index
Aarchive
restoring files . . . . . . . . . . . . . . . . . . 45verifying archive contents . . . . . . . . . . . . 46verifying files . . . . . . . . . . . . . . . . . . 46
Bbacking up
a specific calling list . . . . . . . . . . . . . . . 48calling lists, all . . . . . . . . . . . . . . . . . 47complete system . . . . . . . . . . . . . . . . 41database . . . . . . . . . . . . . . . . . . . . 49guidelines . . . . . . . . . . . . . . . . . . . 39operating system . . . . . . . . . . . . . . . . 41system and calling lists . . . . . . . . . . . . . 42system configuration files . . . . . . . . . . . . 43system data and statistics files. . . . . . . . . . 44system files . . . . . . . . . . . . . . . . . . 42
Ccalling lists
backing up a specific list . . . . . . . . . . . . 48backing up all. . . . . . . . . . . . . . . . . . 47backing up one . . . . . . . . . . . . . . . . . 42restoring . . . . . . . . . . . . . . . . . . . . 48restoring a specific list . . . . . . . . . . . . . 49
DDAT drive status . . . . . . . . . . . . . . . . . . 40data
backing up . . . . . . . . . . . . . . . . . . . 49backing up statistics files . . . . . . . . . . . . 44restoring . . . . . . . . . . . . . . . . . . . . 50restoring from . . . . . . . . . . . . . . . . . 44
databasebacking up . . . . . . . . . . . . . . . . . . . 49restoring . . . . . . . . . . . . . . . . . . . . 50
DDS tape . . . . . . . . . . . . . . . . . . . . . 39
Ffbackup utility . . . . . . . . . . . . . . . . . . . 44files
backing up system. . . . . . . . . . . . . . . . 42backing up system configuration . . . . . . . . . 43backing up system data . . . . . . . . . . . . . 44verifying in archive. . . . . . . . . . . . . . . . 46
Gguidelines
backing up . . . . . . . . . . . . . . . . . . . 39restoring . . . . . . . . . . . . . . . . . . . . 39
LLEDs, tape drive . . . . . . . . . . . . . . . . . . 40lists
backing up . . . . . . . . . . . . . . . . . . . 48restoring . . . . . . . . . . . . . . . . . . . . 49
Mmonitoring
DAT drive status, LEDs . . . . . . . . . . . . . 40
Ooperating system, backing up . . . . . . . . . . . . 41/opt/avaya/pds/account/* . . . . . . . . . . 44/opt/avaya/pds/lists/*.stat. . . . . . . . . 44/opt/avaya/pds/lists/history/*.hist . . . 44/opt/avaya/pds/xfer/clist . . . . . . . . 42, 47/opt/oracle/oradata . . . . . . . . . . . . 49, 50
Rrestoring
a specific calling list . . . . . . . . . . . . . . . 49calling list . . . . . . . . . . . . . . . . . . . . 48data, from. . . . . . . . . . . . . . . . . . . . 44database . . . . . . . . . . . . . . . . . . . . 50files from archive . . . . . . . . . . . . . . . . 45guidelines. . . . . . . . . . . . . . . . . . . . 39
Sstatistics
backing up system data . . . . . . . . . . . . . 44system
844 Maintenance and Troubleshooting Guide March 2008
back up . . . . . . . . . . . . . . . . . . . . 41backing up calling lists . . . . . . . . . . . . . 42backing up configuration files . . . . . . . . . . 43backing up files . . . . . . . . . . . . . . . . . 42
Ttape storage environment . . . . . . . . . . . . . 39
Vvalidating
archive contents . . . . . . . . . . . . . . . . 46files in archive . . . . . . . . . . . . . . . . . 46
verifyingarchive contents . . . . . . . . . . . . . . . . 46files in archive . . . . . . . . . . . . . . . . . 46
Top Related