THE Mother Pearl of ALL Pearls Do NOT write new exams for make-
ups or rotationsimply change 20% of the questions 2014 Rollant
Concepts, Inc.2
Slide 4
A few other Pearls Analyze what is - look @ Option As Start
with a Version A If multiple bad Ver. A tests, select the
performers to develop a Version B Enhance test security Alternate
Versions A & B every other semester/quarter 2014 Rollant
Concepts, Inc.3
Slide 5
Relax...ThinkFocus 4 2014 Rollant Concepts, Inc.
Slide 6
5 Lets now get to work & have some fun!!!
Slide 7
2014 Rollant Concepts, Inc. Test Development Item writing is a
craft, little bit art and a little bit science. The science
provides the guidelines, while the art provides the flexibility to
operate within the guidelines. (Anderson, 2003) 6
Slide 8
Question What is the proper ratio of TF questions as opposed to
multiple choice, fill in the blanks, survey and problem solving
essays? Multiple Choice 50 min = 50 questions TF 50 min = 75
questions Others ask colleague to do and time 2014 Rollant
Concepts, Inc.7
Slide 9
Question ADA is concerned about access to buildings and other
structures The organization provides codes for signage and other
provisions. The following is a two-part question and you need to
answer both parts: Part A. What does ADA stand for? Part B. ADA
mandates specific messages for whom? 2014 Rollant Concepts,
Inc.8
Slide 10
Question ADA is concerned about access to buildings and other
structures The organization provides codes for signage and other
provisions. The following is a two-part question and you need to
answer both parts: Part A. What does ADA stand for? Define ADA?
Part B. ADA mandates specific messages for whom? check all that
apply 2014 Rollant Concepts, Inc.9
Slide 11
SAMPLE QUESTION 1. What is the purpose of adding fins on the
tubing used for heat transfer? A) Fins protect the coils from dirt.
B) Fins keep small animals out of the unit by closing the gaps
between the coils. C) Fins straighten the air flowing over the
coils so that is flows more easily. D) Fins increase heat transfer
by increasing the surface area. Answer: D 2014 Rollant Concepts,
Inc.10
Slide 12
SAMPLE QUESTION 1. What is the purpose of adding fins on the
tubing used for heat transfer? A) Protect the coils from dirt. B)
Keep small animals out of the unit by closing the gaps between the
coils. C) Straighten the air flowing over the coils so that is
flows more easily. D) Increase heat transfer by increasing the
surface area. Answer: D 2014 Rollant Concepts, Inc.11
Slide 13
Sample Question 1. Explain the difference between the Reference
Clip Boundary Tool and the Reference Clip Mask Tool. (Answer: Clip
Reference displays the part inside a Clip Boundary, whereas the
Mask Reference Tool displays the part outside the clip boundary PG.
519) 2014 Rollant Concepts, Inc.12
Slide 14
Sample Question 1. Explain the two differences between the
Reference Clip Boundary Tool and the Reference Clip Mask Tool.
(Answer: Clip Reference displays the part inside a Clip Boundary,
whereas the Mask Reference Tool displays the part outside the clip
boundary PG. 519) 2014 Rollant Concepts, Inc.13
Slide 15
Sample Question 2. The command lets you select an item and
gives you information like x and y coordinates, angle drawn at or
if circle a radius or area. (Answer: LIST) 2014 Rollant Concepts,
Inc.14
Slide 16
Sample Question 2. The command lets you select an item. Given
information is like x and y coordinates, angle drawn at or if it is
a circle, a radius or area. (Answer: LIST) ?????????? 2014 Rollant
Concepts, Inc.15
Slide 17
Question Sample Define and explain why assertiveness is a
valuable characteristic for a job seeker. 2014 Rollant Concepts,
Inc.16
Slide 18
Question Sample Define and explain why assertiveness is a
valuable characteristic for a job seeker. Of what age? With what
experience? In all situations? 2014 Rollant Concepts, Inc.17
Slide 19
Question Sample A company has decided to look at the impact of
BYOD in their work environment. What kinds of issues might be
identified in the security, privacy, maintenance, and productivity
realms related to BYOD? 2014 Rollant Concepts, Inc.18
Slide 20
Question Sample A company has decided to look at the impact of
bring your own device [BYOD] in their work environment. What
Discuss two kinds of issues that might be identified in each of
these realms: the security, privacy, maintenance, and productivity
realms related to BYOD? 2014 Rollant Concepts, Inc.19
Slide 21
Sample question Describe the difference between metallic
detection and nonmetallic detection proximity sensors 2014 Rollant
Concepts, Inc.20
Slide 22
Sample question Describe the two differences between metallic
detection and nonmetallic detection proximity sensors 2014 Rollant
Concepts, Inc.21
Slide 23
Sample question The total inductive reactance, XLT, of series
connected Inductors is: a. calculated using the reciprocal formula
b. equal to the sum of the individual reactance values c. found by
dividing VT by the inductance, L, in Henries d. impossible to
determine 2014 Rollant Concepts, Inc.22
Slide 24
Sample question The total inductive reactance, XLT, of series
connected Inductors is: a.impossible to determine b.equal to the
sum of the individual reactance values c.found by dividing VT by
the inductance, L, in Henrie d.found by calculating with the use of
the reciprocal formula 2014 Rollant Concepts, Inc.23
Slide 25
Question Sample Compare and Contrast the 4 locations listed
below in terms of geography, family structure, religion,
traditions, home types, climate and regional construction methods.
Istanbul Malaysia Paraguay Alaska 2014 Rollant Concepts,
Inc.24
Slide 26
Question Sample Compare and Contrast the 3 of the 4 locations
listed below in terms of geography, family structure, religion,
traditions, home types, climate and regional construction methods.
[30 minutes] Istanbul Malaysia Paraguay Alaska 2014 Rollant
Concepts, Inc.25
Slide 27
Thank You! 2014 Rollant Concepts, Inc.
Slide 28
A new drive-thru window Test Construction by Dr. Paulette D.
Rollant President Rollant Concepts, Inc. 27 2014 Rollant Concepts,
Inc.
Slide 29
Objectives Begin to associate a test plan with formative and
summative evaluation. Begin construction or revision of test items
to an application or analysis level. 2014 Rollant Concepts,
Inc.28
Slide 30
Objectives Make decisions about exams and test items based on
an item analysis- KR-20, P-value, frequency, and /or point
bi-serial. Apply at least one creative teaching strategy associated
with evaluation in mind in the classroom or clinical setting 2014
Rollant Concepts, Inc.29
Slide 31
2014 Rollant Concepts, Inc. We put our Hearts In our Tests We
put our Hearts In our Tests #
Slide 32
2014 Rollant Concepts, Inc. You can please some of the people
some of the time But you cant please all of the people all of the
time. 31