GE CapitalJim Hanley, Equipment Remarketing Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491 E:[email protected]
Under Management of:ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERSCorporate Office:40 Daniel Street, Ste 2Farmingdale, NY 11735631-454-1766 Fax: 631-454-1779
Sale Presented By:
www.kosterindustries.com • e-mail: [email protected]
ONLINE ONLYAUCTION
ONLINE BIDDING ENDS: Thursday, March 16th, 2017 at 1:00 p.m. ESTINSPECTION: Wednesday, March 15th from 8:00 A.M. to 4:00 P.M. EST
To Register For This Auction, Please Visit www.kosterindustries.com
FEATURING: (2) 2013 Mitsubishi MV2400-ST CNC Wire EDMs • 2013 Cosen
SVTG-6070H Hydraulic Traversing Bed Vertical Plate Saw • CNC Vertical
Machining Centers • CNC Lathes • Vertical Turret Lathe • Wheel Press
• Toolroom Machinery • Forklifts – Up to 20,000-Lb. • Plus Much More!
Surplus to the Ongoing Needs of:
GE OIL & GAS(2) Locations:
2475 Tarantine Blvd., Wellsville, New York 14895 Lufkin, Texas
Mitsubishi Mdl. MV2400-ST Wire Cut EDMs
Cosen Mdl. SVT-6070H Hydraulic Vertical Plate Saw
>Sharp
Mdl. 118H Precision Toolroom
Lathe
1OF 22013
2013
Fadal VMC 4020 CNC Vertical Machining Center
2000
Online Bidding Through GEwarehouse.com
2015
Sale Presented By: Corporate Office: 40 Daniel Street – Suite 2, Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779Boston Office: 978-474-4442 • Fax:978-474-4673www.kosterindustries.com • e-mail: [email protected]
CNC WIRE EDMs(2) Mitsubishi Mdl. MV2400-ST Wire Cut EDMs, max. workpiece dimensions: 41.3" x 32.3" x 16.5", max. workpiece weight: 3,300-lb., table dimensions (4-sided): 33.0" x 25.2", machining range: 23.6" x 15.7" x 16.7", taper angle: 15˚ at 10.25", table rapid feed: 51.2 in/min, wire dia.: .004–.012, minimum wire thread start hole .20", max. workpiece at height: 16.5", wire tension: 50–2,500 (g), complete with paper cartridge filter system, 260-gal. filter tank capacity, linear scales, linear shaft motors, automatic wire threading, Mitsubishi M700 Series PC CNC controls (2013)
HYDRAULIC VERTICAL PLATE SAWCosen Mdl. SVT-6070H Hydraulic Traversing Bed Vertical Plate Saw, max. cutting capacity: height 23.6", throat 27.5", length: 49", saw frame travel: hydraulic cylinder feeding, work bed height: 49.2", saw blade: size 237.8" x 2" x .063", speed 50–262 SFPM, motor output: 10HP main, 3HP hydraulic, 1/4HP coolant, load capacity: 8,000-lb., complete with tungsten carbide blade guides, hydraulic blade tensioning, slotted table, PLC controller (2013)
CNC VERTICAL MACHINING CENTERSFadal Mdl. VMC 4020 CNC Vertical Machining Center, complete with 20-position automatic tool changer, 20" x 48" table, up to 10,000 RPM spindle speeds, Fadal 88HS CNC controls, S/N: 012000020267 (2000)
Fadal Mdl. VMC 4020 CNC Vertical Machining Center, with 4th axis, complete with 30-position automatic tool changer, thru spindle coolant, Fadal 88HS CNC controls, S/N: 9506008
VERTICAL TURRET LATHEO&M Mdl. VTL-12 Vertical Turret Lathe, with 47-1/2" chuck, 43" under rail, 5.1–280 RPM spindle speeds, 5-station turret, Acu-Rite 2-axis digital readout, S/N: MN782977
LATHESSharp Mdl. 118H Precision Toolroom Lathe, with Fagor 2-axis digital readout, variable speed, inch/metric threading, carriage feed, tailstock, S/N: GCT1510397
Toolmex Mdl. TUR710 Lathe, with 20" 4-jaw chuck, 30" swing, 96" cc, steady rest, 4" hole thru spindle, 12–1,400 RPM spindle speeds, Newall 2-axis digital readout, 30" actual swing, S/N: 50501
Clausing Mdl. CDS1640C Lathe, with 12" 4-jaw chuck, 16" swing, 40" cc, 26–1,700 RPM spindle speeds, Newall 2-axis digital readout, inch/metric threading, S/N: G1315 (2008)
Toolmex Mdl. TUG-40 Lathe, with 10" 3-jaw chuck, 9" swing, 36" cc, 18–1,600 RPM spindle speeds, Newall 2-axis digital readout, S/N:8356
Lansing Mdl. G 15" Lathe, with 12" 3-jaw chuck, 36" between centers, 4" hole thru spindle
Hardinge Mdl. ESM 9" x 12" Turret Lathe, with up to 3,500 RPM, tailstock, S/N: 59-21915-1
Southbend Mdl. 199 Lathe, with 10" swing, 4' long bed, 6" 3-jaw chuck, 30" cc, S/N: 18256
ITEMS LOCATED IN WELLSVILLE, NEW YORK
Toolmex Mdl. TUR710 Lathe
O&M Mdl. VTL-12 Vertical Turret Lathe
Clausing Mdl. CDS1640C Lathe
2008
Under Management of:
GE Capital Jim Hanley, Equipment Remarketing Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491 E:[email protected]
CNC LATHESOkuma Mdl. LB25 CNC Lathe, with 12" 4-jaw chuck, chip conveyor, tool setter, hydraulic tailstock, Okuma OSP5020L CNC controls, S/N: 0802D470
Okuma Mdl. LNC-8C “Cadet” CNC Lathe, with 12-station turret, 9-1/2" 4-jaw chuck, tool setter, chip conveyor, Okuma CSP5020L CNC controls, S/N: 0802D470
VERTICAL MILLSChevalier Mdl. FM-5VKH Vertical Knee Mill, with 11" x 52" table, Acu-Rite digital readout, power feed all directions, 66–4,000 RPM spindle speeds, S/N: VM882002
Bridgeport 2HP Vertical Knee Mill, with 9" x 48" power feed table, BT-30 spindle, 60–4,200 RPM, complete with 6" riser, Acu-Rite digital readout, S/N: HDNG5874M
Bridgeport 2HP Vertical Knee Mill, with 9" x 48" power feed table, R-8 Spindle, 60–4,200 RPM spindle speeds, 4" riser, Newall 2-axis digital readout, S/N: BR270016
Bridgeport 2HP Vertical Knee Mill, with 9" x 48" power feed table, Acu-Rite 2-axis digital readout, 60–4,200 RPM spindle speeds, S/N: 215380
ALSO: Phase II 12" dia. 4th Axis Rotary Table
WHEEL PRESSBirdsboro Steel Foundry and Machine Company Mdl. 600-25-HWI-11-107-2-M 600-Ton Capacity Wheel Press, with 84" between strain bars, 144" max. opening distance, 4,100-lb. working pressure, 18" ram, 24" throat, S/N: 2539
SAWS – All TypesMilwaukee 8" Panel Saw,S/N: 797A495120029
Powermatic Mdl. 87 Vertical Bandsaw, with 2' x 2' table, 1/8"–1/2" blade capacity, 19-1/4" throat, tilts to 45, complete with blade welding attachment, S/N: 0-1680
Grizzly Industrial Mdl. G0514X2 3HP Vertical Bandsaw, with Extreme Series 19" x 26-3/4" table, 143" blade length, 1/8"–1-1/4" blade width, tilt table, S/N: 09110208
Rockwell Delta Mdl. DW715 Type 3 12" Compound Mitre Saw,S/N: 30621
Rockwell Mdl. 10 Contractors Table Saw, with 27" x 39" table
Wellsaw Mdl. 8 Bandsaw,S/N: 33538
GRINDERSMitsui Mdl. MSG-200MH Surface Grinder, with 6" x 12" Walker Ceramax magnetic chuck, complete with Magnascale 2-axis digital readout
Blohm-Simplex Mdl. 7 Surface Grinder, with 12" x 27-1/2" magnetic chuck, Neutrol rectifier, Finimatic feed, S/N: 1846
Taft-Pierce 5" x 12" Surface Grinder, with 5" x 12" Walker Ceramax magnetic chuck, Acu-Rite Quick-Count 2-axis digital readout, S/N: 2025
<Mitsui Mdl. MSG-200MH Surface Grinder
>Blohm-Simplex
Mdl. 7 Surface Grinder
Bridgeport 2HP Vertical Knee Mill
Chevalier Mdl. FM-5VKH Vertical Knee Mill
Birdsboro Steel Foundry and Machine Company 600-Ton Capacity Wheel Press
Okuma Mdl. LB25 CNC Lathe
INSPECTION: Wednesday, March 15th from 8:00 A.M. to 4:00 P.M. EST
1OF 3
Sale Presented By: Corporate Office: 40 Daniel Street – Suite 2, Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779Boston Office: 978-474-4442 • Fax:978-474-4673www.kosterindustries.com • e-mail: [email protected]
OVENS & FURNACESDespatch Style V-41SD Electric Oven, 86" wide x 78" deep x 94" tall outside dimensions, 63" wide x 67" deep x 55" tall inside dimensions, 46" x 60" cart, 850 F. max. temperature, S/N: 96230
JPW Design & Mfg. Preheat Oven, with 46" x 46" pallet size, 36" vertical clearance, 500 max. temperature, S/N: 001449
Johnson Mdl. 729FA Furnace, with 400,000 BTU/HR output, natural gas fired, tin pot
Johnson Mdl. 719FA Gas Appliance Furnace, with 200,000 BTU/HR output, natural gas fired, tin pot
WASH UNIT – SAND BLAST EQUIPMENTProceco Typhoon Mdl. 48-48-G-2000-2 Washer, with 420-gal. tank capacity, 200-gal. rinse, 2,000-lb. table, natural gas fired, 48" clear height, 51" dia. table, 400,000 BTU/HR, S/N: 89-201
Empire Abrasive Mdl. P352 Manual Sand Blast Equipment, complete with pressure tanks, hood, hoses
Bad Boy “E” Series Mdl. BB4000XLD-BUD Bead Blaster, with 31" octagonal table, 48" x 48" x 50" tall cabinet, collector
Fountain Industrial Mdl. 2779 30" x 57" Heated Wash Tank, 17" of fluid allowed, pneumatic (for agitation), S/N: 12096733
Pan America Oil/Water Separator
Despatch Style V-41SD Electric Oven Johnson Mdl. 729FA Furnace
Proceco Typhoon Mdl. 48-48-G-2000-2 Washer
Toyota Mdl. 7FGU25 3,750-Lb. Capacity Propane Forklift
Silent Hoist and Crane Company Mdl. FK610 20,000-Lb. Capacity Propane Diesel Forklift
FORKLIFT TRUCKS & SCISSOR LIFTSilent Hoist and Crane Company Mdl. FK610 20,000-Lb. Capacity Propane Diesel Forklift Truck, with 31,500-lb. weight, 8' long forks, side shift, S/N: 20097
Toyota Mdl. 7FGU25 3,750-Lb. Capacity Propane Forklift Truck, with solid tires, 189" reach, S/N: 61089
Prime Mover Mdl. SC40 Walk-Along Type Electric Forklift Truck, 4,000-lb. max. capacity
FLOOR CLEANERSTennant Mdl. 7200 Electric Ride-On Type Floor Scrubber, 1693 hours
Tennant Mdl. 5700 Walk-Along Type Floor Scrubber
FLOOR PLATES – GRANITE TABLE – TEST EQUIPMENTTest Stand, with 75HP electric motor, floor plate, 6' x 182" plate #1, 8' x 170" plate #2
Tru-Stone Corp. Grade A Granite Surface Table, 96-1/2" wide x 144" long x 18-1/2" thick, S/N: 9176
CRANES & HOISTSSage 5-Ton Capacity Jib Crane, with 9' under hook, 17'6" span
5-Ton Wallace Portable Gantry Crane, with 3-ton C&M electric hoist, 5-ton C&M chain fall, 12' between uprights
ALSO: Numerous Jib Hoists, assorted capacities
Portable A-Frame Gantry Crane, with CM 1-ton chain fall, approximately 12' between uprights
Sage 5-Ton Capacity Jib Crane
ONLINE BIDDING ENDS: Thursday, March 16th, 2017 at 1:00 p.m. ESTINSPECTION: Wednesday, March 15th from 8:00 A.M. to 4:00 P.M. EST
To Register For This Auction, Please Visit www.kosterindustries.com
Surplus to the Ongoing Needs of:
GE OIL & GAS(2) Locations: 2475 Tarantine Blvd., Wellsville, New York 14895 • Lufkin, Texas
Online Bidding Through GEwarehouse.com
Under Management of:
GE Capital Jim Hanley, Equipment Remarketing Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491 E:[email protected]
ONLINE BIDDING ENDS: Thursday, March 16th, 2017 at 1:00 p.m. ESTINSPECTION: Wednesday, March 15th from 8:00 A.M. to 4:00 P.M. EST
To Register For This Auction, Please Visit www.kosterindustries.com
INSPECTIONCheckmaster Coordinate Measuring Machine, with Renishaw TP-ES probe, 24" x 36" overall table size, (2002)
Miscellaneous Inspection Items Incl.: Pin Gauge Sets, Digital Height Gauges, ID and OD Gauges, Micrometers, Etc.
Checkmaster Coordinate Measuring Machine
GEAR HOBBERPfauter Mdl. P1251 Original Gear Hobber, with 47-1/2" T-slotted table, change gears, S/N: 23670
CNC TURNING CENTERSMag Boehringer Mdl. VDF450-4T/3000MM CNC Turning Center, max. turning length 118", travels on upper right and upper left hand carriages: X-16.33", Z-120.07", swing over bed: 27.55", max. turning with external tools: 17.71", turning center height: 53.14", spindle bore: 4.05", complete with dual 12-station turrets, hydraulic tailstock, steady rest, Siemens Acramatic CNC controls, S/N: 1140.5714-35 (2012)
Mag Boehringer Mdl. VDF450-T/2000 CNC Turning Center, max. turning length 78.74", travels on upper right and upper left hand carriages: X-16.33, Z-80.70", swing over bed: 27.56", turning with external tools: 17.71", spindle bore: 4.05", complete with dual 12-station turrets, hydraulic tailstock, steady rest, Rome chuck, chip conveyor, Siemens Acramatic CNC controls, S/N: 1140.5715-35 (2012)
HORIZONTAL BORING MILLLucas 5" Horizontal Boring Mill, travel approximately 172", stroke on spindle: 21", spindle travel: approximately 48", mounted on rail, complete with 76" x 120" rotary table, power drawer bar, 50-taper spindle, 4-axis digital readout, operator’s platform, pendant controls
ITEMS LOCATED IN LUFKIN, TEXAS
Pfauter Mdl. P1251 Original Gear Hobber
ITEMS LOCATED IN WELLSVILLE, NEW YORK
Mag Boehringer Mdl. VDF450-T/2000 CNC Turning Center
2012
Mag Boehringer Mdl. VDF450-4T/3000MM CNC Turning Center
2012
2002
Online Bidding Through GEwarehouse.com
MISCELLANEOUS MACHINERY Ridgid Mdl. 300 Pipe Threader
Lincoln Mdl. Idealarc Tig 300/300 Electric Welding Power Supply, S/N: 502400
Inscale Mdl. LP7510A Digital Platform Scale, with 4' x 4' platform, S/N: AE131121107
Clausing Mdl. 2284 20" Drill Press, with 150–2,000 RPM spindle speeds, 1.5HP motor, S/N: 515122
Miscellaneous Shop Support Incl.: Drills, CNC Tool Holders, Hydraulic Pallet Jacks, Self-Dumping Hoppers, Material Handling Carts, Heavy Duty Adjustable Steel Pallet Racking, CNC Tool Holder Carts, Ladders, Kurt Milling Vises, Tool Chests, Granite Surface Plates, Vidmar and Lista Cabinets, Carbide Inserts, Fans, Hose, Flame Proof Storage Cabinets, Banding Carts and Tools, Lifting Magnets, Clamps, Drill Presses, Double End Pedestal and Bench Grinders, Hand Tools, Collets, Machine Tooling, Hose Reels, Assorted Hardware, Burning Gage and Torch Sets, Lifting Straps and Chains, Shop Vacuums, Knaack Tool Boxes, Hydraulic Pumps, Etc.
GE CapitalJim Hanley, Equipment Remarketing Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491 E:[email protected]
Under Management of:ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERSCorporate Office:40 Daniel Street, Ste 2Farmingdale, NY 11735631-454-1766 Fax: 631-454-1779
Sale Presented By:
www.kosterindustries.com • e-mail: [email protected]
QS-0036291
To Register For This Auction, Please Visit www.kosterindustries.com
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 17
AUCTIONEERS • APPRAISERS • LIQUIDATORS40 Daniel Street, Suite 2, Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779
Surplus to the Ongoing Needs of:
GE OIL & GAS (2) Locations: 2475 Tarantine Blvd., Wellsville, New York 14895 & Lufkin, Texas
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 16.5% Buyer’s Premium will apply on all purchases. Payment must be made by certified funds or wire transfer. Company or personal checks will be accepted only if accompanied by a letter from the payor’s bank guaranteeing unqualified payment to Koster Industries Inc. All checks must be made payable to the order of Koster Industries Inc. Direct bank wire transfers to the account of Koster Industries Inc. on balances due will be accepted with prior arrangement. No lot may be removed until complete settlement is made.
IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should available themselves of the opportunity to make inspection prior to the sale.
IMPORTANT NOTICE: Nothing herein shall be construed as (i) constituting the creation of an agency, partnership, joint venture, fiduciary or similar relationship between GE and any person; (ii) an approval or commitment to sale by GE to any person; and all transactions are subject to final investment/compliance approval by GE and the execution of mutually satisfactory definitive documentation; (iii) any guarantee or promise of pricing terms or availability thereof which may fluctuate or cease to be available depending on any change in the relevant market. All sales of available equipment will be “as is”, “where is”, with all faults, without recourse or warranty of any kind or nature, express or implied; and subject to detailed terms and conditions of sale of the equipment owner/seller.
<Okuma Mdl. LNC-8C “Cadet” CNC Lathe
Russell M. Koster, TX License #AUCTNR00011005
BRIDGE MILLCincinnati Mdl. U5 Rail Type Universal Machining Center, working area: 66.9" x 432", max. tool length: 19.7", rapid travels: X/Y 0–590/787 IPM, Z-787 IPM, spindle speeds: 40–6,000 RPM, complete with CAT-50 taper spindle, 45-position tool changer, Siemens Acramatic 2100 CNC controls, assorted spare parts, S/N: 0D00B101000
ITEMS LOCATED IN LUFKIN, TEXAS
<Carbo Tech Inc. 30-Ton Capacity Carbon Dioxide Tank, New 2010 (Refurbished)
Late-Model Evapco Cooling Tower
Cincinnati Mdl. U5 Rail Type Universal Machining Center
2002
Online Bidding Through GEwarehouse.com
Top Related