7/27/2019 OJ Armoring Brochure
1/8
FOR THE SECURITY AND PEACE OF MIND OF OURVALUED CLIENTS
When the going gets tough, the tough get going
ARMORED PASSENGER VEHICLES
OMAR JIBRAN ARMORING
OJ is TS-16949 Certified
THE VEHICLE MODELS ALREADY ARMORED
PRADO VIGOLANDCRUISER
COROLLA CAMRY CIVIC
FORTUNER CR-V HARRIER
HIACE
ATM VAN
7/27/2019 OJ Armoring Brochure
2/8
OJ Vehicle Armoring Division is part of Omar
Jibran Engineering Industries, established in1987. OJ is proud of the 26 years of trust andconfidence earned by the best companies inthe World namely Toyota, Honda and PakSuzuki. OJ Armored vehicles are made instate-of-the-art plant of AMC, Adam Motor
Company located in Karachi Steel MillsDownstream on 10 acres land with 120,000sq. ft. manufacturing facility. This plant ispurpose built for Automobile Assembly of allkinds of cars and SUVs.
ARMORING FACILITY
7/27/2019 OJ Armoring Brochure
3/8
Critical Components in Building Reliability
Quality of Materials
Quality of Craftsmanship
All materials are procured from the worlds mostrenowned manufacturers. We provide test certificates,on demand, from the manufacturers for the materials.We conduct in-house destructive testing of steel andglass.
Our work processes are fully documented and bench
marked against well reputed international companiesas per OJ Quality Management System.
We believe our relationship begins when wehandover an armored vehicle to a customer. We stay
with the customer by providing quality parts andexcellent service, keeping the vehicle wellmaintained and road worthy, throughout theownership experience.
Quality of after sale service
7/27/2019 OJ Armoring Brochure
4/8
All Windows are either replaced by
installing bullet resistant glass or byprotecting windows by steel/glasspanels inside
The standard hinges are replaced withspecially machined Heavy Duty Hinges.
The standard suspension is replacedby heavy duty suspension system.
All opaque/steel surfaces of thepassenger cabin are fully Armored bywelded ballistic steel.
Overlaps in all doors are provided toensure that bullets cannot enter thepassenger cabin.
Standard Features
7/27/2019 OJ Armoring Brochure
5/8
The fenders are wherever possibleprotected by welding ballistic steel
plates.
Standard Features
The fuse-box is fully protected by a
removable box of ballistic steel.
The battery is fully protected by aremovable box of ballistic steel.
All five tyres are equipped withrun-flats enabling the vehicle movingwhen the standard tyres are blown up.
7/27/2019 OJ Armoring Brochure
6/8
The fuel tank can be protected by aremovable box of ballistic steel.
The radiator can be protected by aremovable box of ballistic steel.
An intercom communication systemcan be installed.
Extra Optional Features
Windows can be made to partially
open by installing heavy dutyhydraulic Actuators.
7/27/2019 OJ Armoring Brochure
7/8
EN 1063, or CEN 1063, is a security standard created bythe European Committee for Standardization for measuringthe protective strength of bullet-resistant ballistic materials.
A similar classification system primarily used in the UnitedStates is NIJ Standard 0108, the U.S. National Institute ofJustice's Standard for Ballistic Resistant Protective Materi-als which includes glass and armor plate.
120mm
120mm 120mm
For
a particular
rating the steel
or the glass must
stop up to three strikes
of a specific bullet fired from
a specific gun, all landing within
120mm of equilateral triangle. The glazing
should be shatterproof after each strike.
The levels are numbered in order of increasing
protective strength.
http://en.wikipedia.org/wiki/European_Committee_for_Standardizationhttp://en.wikipedia.org/wiki/United_Stateshttp://en.wikipedia.org/wiki/United_Stateshttp://en.wikipedia.org/w/index.php?title=NIJ_0108&action=edit&redlink=1http://en.wikipedia.org/wiki/National_Institute_of_Justicehttp://en.wikipedia.org/wiki/National_Institute_of_Justicehttp://en.wikipedia.org/wiki/National_Institute_of_Justicehttp://en.wikipedia.org/wiki/National_Institute_of_Justicehttp://en.wikipedia.org/w/index.php?title=NIJ_0108&action=edit&redlink=1http://en.wikipedia.org/wiki/United_Stateshttp://en.wikipedia.org/wiki/United_Stateshttp://en.wikipedia.org/wiki/European_Committee_for_Standardization7/27/2019 OJ Armoring Brochure
8/8
CONTACT US at:Phone: +92 21 34723573-75 Fax: +92 21 34750781Email: [email protected] Website: www.ojengg.comPlease visit the Armoring Section on our Main Website.
International Standards
FMJ Full Metal Jacket FMJ/F Full Metal Jacket Flat Nose JSP Jacket Soft PointFMJ/S Full Metal Jacket Soft AP Armored PiercingFMJ/H Full Metal Jacket SWC Steel Wad Cutter
LEVEL
Weapon Speed(m/s +/-10)
NumberOf Shots
Bullet
Size MASS(gm)
Type
B4 9 x 19 mmTT-30/33 Tokarev
0.357 Magnum0.44 Magnum
8.0
or
10.2
FMJ/SC
FMJ/SC
400
430
3 on 120 mmTriangle
B5 7.62 x 39 mm
AK47
Kalashnikov
8.0
or
10.0
FMJ/SC
FMJ/SC
710
641
3 on 120 mmTriangle
B6 5.56 x 45 mmM16 Rifle7.62 x 51 NATO.308 WinchesterHeckler & Koch
G3
German MG3/MG1A3
4.0
9.5
FMJ/SC
FMJ/SC
945
838
3 on 120 mmTriangle
B7 7.62 x 51 AP 9.5 FMJ/HC 838 3 on 120 mmTriangle
Top Related