Oil Field Secondary Containment with Polyurea
www.DemilecUSA.com
Surface Cleaned and Prepped
www.DemilecUSA.com
Surface Cleaned and Prepped
www.DemilecUSA.com
Felt Rolled Out
www.DemilecUSA.com
Felt Glued to the Metal Lip
www.DemilecUSA.com
Excess Felt Trimmed
www.DemilecUSA.com
Screws Added to Edge
www.DemilecUSA.com
Clean Exterior of Containment
www.DemilecUSA.com
Start with the edges and spray away!
www.DemilecUSA.com
Be sure to spray all rivets well
www.DemilecUSA.com
After finishing the edges, spray away
www.DemilecUSA.com
Spraying
www.DemilecUSA.com
Spraying
www.DemilecUSA.com
Final Product
Top Related