r

www.nuflowtech.com 1-800-834-9597 info@nuflowtech.com

Where life interacts with infrastructure.

Pull-In-Place Structural Lining Systems

Nu Flow Micro Cutter

Can negotiate around 45 and 90 degree bends Only solution in the industry that restores cast

iron pipe to its original condition Speed and torque control: Sets shaft rotation so

you can clean and re-instate Easy to operate, minimal training

required Flexible Shaft Speed:

500-3000 RPM Motor Power up to 4 HP Air requirements:

- Minimum 60 PSI at 85 CFM- Maximum 100 PSI at 130 CFM

Nu Flex Structural Lining Start Up Kit

Capable of lining around multiple bends and vertical stacks while stopping and starting anywhere in the line

Optional high-temp resin for industrial and commercial projects has a temperature resistance of up to 220 F

End result is a smooth and jointless new pipe insidethe host pipe

Patented lining system Liners fit 1.5" to 8" pipe diameters, with custom sizes

available Capable of lining through 1 or 2 access points The most versatile system on the market The only system engineered for inside applications.

Ask about our Insta-Cure Hot Water Curing System and

Trailer Packages!

Finished product is a “Pipe within a Pipe”

Applications Water mains Distribution mains Storm lines Rain and roof leaders Drain and sewer lines Vertical and vent stacks

Items not included: drain camera, small pancake compressor, general plumbing tools

U.S. Patent No. 7,849,883: Flex Liner assembly and process for pipeline repair is exclusively available through Nu Flow.

p/n 125 v1