Namur type solenoid valve
Namur type solenoid valve can be connected directly on the pneumatic actuator body without any extra instrument fitting & tubing attached to it.
Namur type solenoid valve
5/2-NamurInterface Plate
3/2-NamurInterface Plate
Double acting pneumatic actuator
Singleacting pneumatic actuator
If the coil is energized it will create magnetic force the plunger will be pulled by the magnetic force the air will coming into the pilot chamber it will push the piston forward the spools will move forward it will
arrange a certain opening for the air to come into or out of the pneumatic actuator
If the coil is DE-energized the magnetic force is gone the plunger will re-seated back & close the incoming air inlet the spools will move backward to the initial position it will arrange a certain closing for
the air that come into or out of the pneumatic actuator
How Namur solenoid valve works
How Namur solenoid valve works
How Namur solenoid valve works
Namur type solenoid valve
Namur type solenoid valve
• A Namur solenoid valve can be used to power double acting pneumatic actuator by installing a 5/2-way interface place in between the solenoid valve & actuator body
• A Namur solenoid valve can be used to power single acting pneumatic actuator by installing a 3/2-way interface plate in between the solenoid valve & actuator body
• The 5/2-way interface plate & 3/2-way interface plate are supplied together with the Namur solenoid valve
Top Related