University of Calabria University of Calabria –– ItalyItalyMechanical Engineering Mechanical Engineering –– Industrial Engineering SectionIndustrial Engineering Section
MSC – LESModeling & Simulation Center
Laboratory of Enterprise Solutions
REPORT 2008-2009
M&SNet Center at Mechanical Department of University of CalabriaVia P. Bucci, Cubo 44C, third floor
87036 Rende (CS), Italy
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
OutlineOutlineIntroduction
People
Research
Cooperations
Publications
Conferences Organization & Journal Special Issue
Students Exchange
Contacts
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
IntroductionIntroductionMSC - LES is the research unit of the Industrial Engineering Section at Mechanical Department of University of Calabria.
The main goal of MSC- LES is the development of innovative ways to use Modeling & Simulation to achieve new scientific advances in production systems and supply chain management domains.
MSC - LES is member of MS&Net (Modeling & Simulation Network) a consortium of co-operating independent organizations active in professionalism, research, education, and knowledge dissemination in the modeling and simulation (M&S) domain.
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
PeoplePeopleProf. Enrico PapoffAssociate Professor
Dr. Giovanni [email protected]
Dr. Francesco [email protected]
Dr. Enrico [email protected]
Antonio [email protected]
Duilio [email protected]
Dr. Leopoldo D’[email protected]
Sabrina [email protected]
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
ResearchResearchThe research interests include Modeling & Simulation for production
systems design and supply chain management. In these areas specific subjects regard:
Supply chain security. The attention is focalized on developing integrated decision support system for the supply chain security. Several studies has been carried out in the field of marine terminal security and containers inspection procedures.The inventory management problem along the supply chain: definition and constrained comparison of different inventory control policies by using a multi-measure based approach;3D Simulation tools for recreating complex environments (i.e. retail stores).Workplace and Workstation Effective Ergonomic design within manufacturing and production systems.
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Research: Domains of ApplicabilityResearch: Domains of Applicability
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Academic Cooperation and Collaborations (2008 Academic Cooperation and Collaborations (2008 –– 2009)2009)Simulation Team and Liophant Simulation, University of Genoa (Italy), Prof. Agostino BruzzoneDepartment of Industrial & Systems Engineering, Rutgers University (the State University of New Jersey, USA), Prof. Tayfur AltiokSystem Engineering Department, Autonomous University of Barcelona (Spain), Prof. Miquel Angel PieraMSNet at University of Ottawa (Canada), Prof. T. OrenDepartment of Modeling & Simulation, Riga Technical University (Latvia), Prof. Yury MerkurievDepartment Systems Engineering and Automation, and Computer Architecture, University of La Laguna, Spain, Prof. Rosi AguilarDepartment of Matematical Modelling & Simulation, Vienna University of Technology (Austria), Prof. Felix Breitenecker
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Marine Ports Security Supply Chain Security and Management
Industrial Engineering
Research centre or company
name
Country Research centre or company
name
Country Research centre or company
name
Country
Laboratory for Port Security (LPS) at
Rutgers UniversityUSA
McLeod Modeling and Simulation
NetworkUSA Rutgers University USA
Port Authority of Barcelona Spain University of
Ottawa CanadaAutonomous University of Barcelona
Spain
Port Authority of Gioia Tauro Italy Riga Technical
University Latvia University of Perugia Italy
Port Authority of Istanbul Turkey Latvian Simulation
Society Latvia MAST Srl Italy
ATOS Origin SAE, Transport &
Logistic UNITSpain University of
Genoa Italy LiophantSimulation Italy
Hamburg Port Consulting Germany University of Rome
La Sapienza Italy Alfagomma Spa Italy
McLeod Institute of Simulation Science
USA
Vitrociset Spa Italy
Global Teknik Turkey
RDLog Italy
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Publications (2008Publications (2008--2009)2009)INTERNATIONAL JOURNALS1. CIMINO A., LONGO F., MIRABELLI G., (2009). Multi-Measures Based Approach for the Ergonomic
Effective Design of Manufacturing System Workstations, International Journal of Industrial Ergonomics, 39(2009), pp. 447-455.
2. LONGO F., MIRABELLI G. (2009). Effective Design of an Assembly Line using Modeling & Simulation, International Journal of Simulation, 2009(3), pp. 50-60
3. CURCIO D., LONGO F., (2009). Inventory and Internal Logistics Management as Critical Factors Affecting the Supply Chain Performances. International Journal of Simulation & Process Modelling, Vol. 5(2), pp 127-137, ISSN: 1740-2123.
4. LONGO F., MIRABELLI G., (2008) An Advanced Supply Chain Management Tool Based on Modeling & Simulation, Computer and Industrial Engineering, Vol 54/3 (2008), pp 570-588.
5. DE SENSI G., LONGO F., MIRABELLI G., (2008). Inventory policies analysis under demand patterns and lead times constraints in a real supply chain, International Journal of Production Research, Vol. 46 (2008), Issue 24, pp. 6997-7016.
6. BRUZZONE A.G., BOCCA E., LONGO F., MASSEI M., (2007) Training and Recruitment in Logistics Node Design by using Web Based Simulation, International Journal of Internet Manufacturing and Services, Vol. I, Issue 1, 2007, pp 32-50.
7. BRUZZONE A.G., LONGO F., (XXXX). An Advanced System for Supporting the Decision Process within Large Scale Retail Stores, Simulation Transaction of the Society for Modeling & Simulation International, (accepted with minor revisions, in progress)
8. LONGO F., (XXXX). Design and Integration of the Containers Inspection Activities in the Container Terminal Operations, International Journal of Production Economics, (accepted with minor revisions, in progress).
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Publications (2008Publications (2008--2009)2009)BOOK CHAPTERS AND CONFERENCES PROCEEDINGS EDITIONS9. LONGO F., (XXXX). Economic Impact of a Terrorist Attack on a Railway System”, in Security and Safety in
Logistics, Society for Modeling & Simulation International Eds, ISBN 1-56555-315-2 (in press).10. BRUZZONE A.G., LONGO F., PIERA M.A., AGUILAR R.M., FRYDMAN C., (2008). Proceedings of the
European Modeling & Simulation Symposium. (vol. I, pp. 1-866). ISBN: 978-88-903724-0-7. RENDE: A.Bruzzone, F.Longo, M.Piera, R.Aguilar, C.Frydman (ITALY).
11. BRUZZONE A.G., LONGO F., MERKURIEV Y., MIRABELLI G., PIERA M.A., (2008). Proceedings of the International Workwhop on Harbour Maritime Multimodal Logistics Modelling & Simulation. (vol. I, pp. 1-302). ISBN: 978-88-903724-2-1. RENDE: A.Bruzzone-F.Longo-Y.Merkuriev-G.Mirabelli-M.Piera (ITALY).
12. BRUZZONE A.G., LONGO F., MERKURIEV Y., PIERA M.A., (2007). Proceedings of the 4th International Mediterranean Modelling Multiconference. (vol. I, pp. 1-386). ISBN: 88-900732-6-8. GENOA: Bruzzone A.G., Longo F., Merkuriev Y., Piera M.A., (ITALY).
INTERNATIONAL CONFERENCES13. CIMINO A., COSTANTINO F., DI GRAVIO G., LONGO F. (2009). Reverse logistics of refillable glass bottles: a
simulative approach. In: Proceedings of the Spring Simulation Multiconference. San Diego, 22-27 March, SAN DIEGO: SCS, vol. I, ISBN/ISSN: 1-56555-327-6
14. LONGO F., MASSEI M., (2008). Advanced Supply Chain Protection & Integrated Decision Support System. In: Proceedings of the Second Asia International Conference on Modeling & Simulation. Malesya. KUALA LUMPUR, 13-15 May, KUALA LUMPUR, p. 716-721.
15. BRUZZONE A. G., LONGO F. (2008). VIP - Virtual Interactive Port. In: Proceedings of Summer Computer Simulation Conference. Edinburgh, 16-19 June, SAN DIEGO: SCS, ISBN/ISSN: 1-56555-323-3
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Publications (2008Publications (2008--2009)2009)16. BOCCA E., LONGO F. (2008). Simulation Tools, Ergonomics Principles and Work Measurement Techniques
for Workstations Design. In: Proceedings of Summer Computer Simulation Conference. Edinburgh, 16-19 June, SAN DIEGO: SCS, p. 481-486, ISBN/ISSN: 1-56555-323-3
17. CIMINO A., CURCIO D., LONGO F., PINTO E. (2008). Virtual Store for Retail. Proceedings of the International Curtural and Academic Meeting of Engineering Students, Istanbul, Turkey, 10-17 May (Technical Report).
18. OREN T., LONGO F. (2008). Emergence, Anticipation And Multisimulation: Bases For Conflict Simulation. In: Proceedings of the European Modeling & Simulation Symposium. Campora S.Giovanni (CS), Italy, 17-19 September, RENDE: A.Bruzzone-F.Longo-M.Piera-R.Aguilar-C.Frydamn, vol. I, p. 546-555, ISBN/ISSN: 978-88-903724-0-7.
19. LONGO F., OREN T., (2008). Supply Chain Vulnerability and Resilience: A state of the Art Overview. In: Proceedings of the European Modeling & Simulation Symposium. Campora S.Giovanni (CS), Italy, 17-19 September, RENDE: A.Bruzzone-F.Longo-M.Piera-R.Aguilar-C.Frydman, vol. I, p. 527-533, ISBN/ISSN: 978-88-903724-0-7
20. CIMINO A., CURCIO D., LONGO F., MIRABELLI G., (2008). Workplaces effective ergonomic design: a literature review. In: Proceedings of the European Modeling & Simulation Symposium. Campora S. Giovanni (CS), Italy, 17-19 September, RENDE: A.Bruzzone-F.Longo-M.Piera-R.Aguilar-C.Frydman, vol. I, p. 853-862, ISBN/ISSN: 978-88-903724-0-7.
21. CIMINO A., CURCIO D., LONGO F., PAPOFF E., (2008). Workstation productivity enhancement withinhydraulic hoses manufacturing process. In: Proceedings of the International Workshop on Modelling & AppliedSimulation. Campora S. Giovanni, 17-19 September, RENDE: A.Bruzzone-P.Elfrey-E.Papoff-M.Massei-I.Molnar, vol. I, p. 268-274, ISBN/ISSN: 978-88-903724-1-4.
22. CIMINO A, LONGO F., MIRABELLI G., PAPOFF E., (2008). Shop orders scheduling: dispatching rules and genetic algorithms based approaches. In: Proceedings of the European Modeling & Simulation Symposium. Campora S. Giovanni (CS), Italy, 17-19 September, RENDE: A.Bruzzone-F.Longo-M.Piera-R.Aguilar-C.Frydman, vol. I, p. 817-823, ISBN/ISSN: 978-88-903724-0-7.
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Publications (2008Publications (2008--2009)2009)23. CURCIO D., LONGO F., MIRABELLI G., PAPOFF E., (2008). Supply chain design: a case study on the
addition of new potential customers. In: Proceedings of the International Workwhop on Harbour MaritimeMultimodal Logistics Modelling & Simulation. Campora S. Giovanni (CS), Italy, 17-19 September, RENDE: A.Bruzzone-F.Longo-Y.Merkuriev-G.Mirabelli-M.Piera, vol. I, p. 42-48, ISBN/ISSN: 978-88-903724-2-1.
24. CIMINO A., CURCIO D., LONGO F., MIRABELLI G., (2008). Logistics & transportation within the retail sector: sensitivity analysis on the distribution system. In: Proceedings of the International Workwhop on Harbour Maritime Multimodal Logistics Modelling & Simulation. Campora S. Giovanni (CS), Italy, 17-19 September, RENDE: A.Bruzzone-F.Longo-Y-Merkuriev-G.Mirabelli-M.Piera, vol. I, p. 123-128, ISBN/ISSN: 978-88-903724-2-1.
25. CIMINO A., LONGO F., MIRABELLI G., PAPOFF E. (2008). Most and MTM for Work Method Optimization: a Real Case Study based on Modeling & Simulation. In: Proceedings of the International Workwhop on Harbour Maritime Multimodal Logistics Modelling & Simulation. Campora S. Giovanni (CS), Italy, 17-19 September, RENDE: A.Bruzzone-F.Longo-Y.Merkuriev-G.Mirabelli-M.Piera, vol. I, p. 35-41, ISBN/ISSN: 978-88-903724-2-1.
26. CURCIO D., LONGO F. (2008). Sensitivity analysis and optimization of different inventory control policiesalong the supply chain. In: Proceedings of the European Modeling & Simulation Symposium. Campora S. Giovanni (CS), Italy, 17-19 September, RENDE: A.Bruzzone-F.Longo-M.Piera-R.Aguilar-C.Frydman, vol. I, p. 824-830, ISBN/ISSN: 978-88-903724-0-7.
27. BOCCA E., CURCIO D., LONGO F., TREMORI A., (2008). Warehouse and Internal Logistics Management based on Modeling & Simulation. In: Proceedings of the International Workshop on Modelling & AppliedSimulation. Campora S. Giovanni (CS), Italy, 17-19 September, RENDE: A.Bruzzone-P.Elfrey-E.Papoff-M.Massei-I.Molnar, vol. I, p. 41-48, ISBN/ISSN: 978-88-903724-1-4.
28. BRUZZONE A. G., POGGI S., BOCCA E., LONGO F., MADEO F., RONDINELLI S., (2008). WorkloadForecast Algorithm Optimization for Re-Organizing Retail Network. In: Proceedings of the International Workshop on Modelling & Applied Simulation. Campora S. Giovanni (CS), Italy, 17-19 September, RENDE: A.Bruzzone-P.Elfrey-E.Papoff-M.Massei-I.Molnar, vol. I, p. 77-82, ISBN/ISSN: 978-88-903724-1-4.
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Projects & ProposalProjects & ProposalSEAPORTS – SEcurity Advances in marine PORTS and effects on the global supply chainALBATROS – All Levels Balanced Architecture to ThReats in Operation at SeaSOCRATES – Shopping On line CReated by Advanced Three-dimensional Environments and Simulation TESEO – Development of innovative models for the Technical, Economic, Social and Environmental sustainability of industrial and logistic processes WEED – Workstation Ergonomic Effective DesignWILMA – Warehouse and Internal Logistics MAnagementSOMMA – Supply chain Orders Management Modeling & AnalysisWORKS – Workstations SimulatorsVDS – Virtual Dynamic Store for retailPLOTTER – Plant Lay-out Analysis and Optimization Through Times and Ergonomic Re-Organization
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Projects & Proposal: SEAPORTSProjects & Proposal: SEAPORTS
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Projects & Proposal: TESEOProjects & Proposal: TESEO
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Projects & Proposal: WEEDProjects & Proposal: WEED
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Conferences Organization (2009 Conferences Organization (2009 –– 2010)2010)MSC-LES supports the Organizing Committee of the following international conferences:
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Conferences Organization (2007 Conferences Organization (2007 –– 2008)2008)
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
International Journals Special Issues (2008 International Journals Special Issues (2008 –– 2010)2010)
MSC-LES is supporting the following international journals special issues:
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
Students Exchange: 2009Students Exchange: 2009--20102010From MSC-LES to other centers:
Antonio Cimino, PhD Student: VMASC, Virginia (USA), October 2009 – December 2009Alessandro Chiurco, Master Degree Student: Rutgers University, New Jersey, (USA), September 2009 – Novemeber 2009Salvatore Bruni, Master Degree Student: UAB, Spain, agreement and period to be defined Angela Aiello, Master Degree Student: UAB, Spain, agreement and period to be defined
From other centers to MSC-LES:Federico Tralongo, PhD Student: University of Genoa (Italy), March 2009 – April 2009.Elton Lucas Nhaca, Master degree Student: Portuguese Catholic University (Portugal), agreement and period to be defined
University of University of CalabriaCalabria
Industrial EngineeringIndustrial EngineeringSectionSection
Modeling & Simulation CenterModeling & Simulation CenterLaboratory of Enterprise SolutionsLaboratory of Enterprise Solutions
ContactsContacts
MSC-LES Modeling & Simulation CenterLaboratory of Enterprise SolutionsMechanical Department, University of CalabriaVia Ponte Pietro Bucci, Cubo 44C, Third FloorTel. +39 0984 494891 - 494613Fax +39 0984 494673email: [email protected]
http://www.msc-les.org
Top Related