Horizontal Grinder Application Chart

Desc: WoodchuckKerf: 2.83”Bolt Sz: 1 1/8”x12NFModels: 4800, 5060, 6800

Desc: WoodchuckKerf: 3”Bolt Sz: 3/4”x16NFBolt C/C: 1 9/16” Model: 3600

Q10937-STB Q11000BT Q10972BT

Desc: WoodchuckKerf: 3”Bolt Sz: 3/4”x16NFBolt C/C: 1 11/16” Models: 3800, 4600XL

Desc: WoodchuckKerf: 3”Bolt Sz: 3/4”x16NFBolt C/C: 1 5/8” Model: 4600

Desc: WoodchuckKerf: 2.5”Bolt Sz: 3/4”x16NFBolt C/C: 1 11/16”Model: 4700

Desc: WoodchuckKerf: 2.5” Bolt Sz: 7/8”x14NFBolt C/C: 1 11/16” Models: 5700,6700

Desc: WoodchuckKerf: 2.7”Bolt Sz: 7/8”x14NFModel: 2400

Desc: WoodchuckKerf: 2.81”Bolt Sz: 7/8”x14NFModel: 5400

Desc: WoodchuckKerf: 3”Bolt Size: 3/4” x 16NFBolt C/C: 1 11/16” Models: 3045, 3060,4060, 1500, 1500T,4000, 5100, 5200

Desc: WoodchuckKerf: 2.125”Bolt Size: 5/8”x18NFBolt #: Holder Length +1”

Q10971-BT

Desc: WoodchuckKerf: 2.8” Bolt Size: 7/8”x14NFModel: HG6000Series: I rotator

Q10971X2

Desc: Carbide, 4-tipKerf: 2.25”Bolt Size: 5/8”x18NFBolt #: Holder Length +1”

Features, Advantages & Benefits

Through research and development of the QUAD TOOTH® system, we’ve developed tougher, more sustainable mower and grinder teeth to withstand harsh elements. Available for all popular applications, these teeth perform well in even the toughest conditions. With a QUAD TOOTH, your machine will perform like more horsepower has been added because less cutting effort is required. Less cutting effort equals fuel savings and less wear on the machine. Our standard factory tips are all one-piece, in addition, we have designed a holder that has replaceable teeth and in some instances, rotatable teeth for reduced cost and longer life.

The QUAD TOOTH® system allows you to:Increase the number of loads per dayDecrease wear on equipmentBurn less fuel

Increase your load weight and get: More production per dayLess labor per loadMore $$ per load

www.quadco.com

Desc: WoodchuckKerf: 1.867” Bolt Size: 5/8”x18NFBolt C/C: 1 5/16”Model: HG200

Desc: WoodchuckKerf: 3.41” Bolt Size: 7/8”x14NFBolt C/C: 2 1/16”Models: HG6000Series: II rotator

Desc: WoodchuckKerf: 1.867”Bolt Sz: 5/8”x18NFBolt C/C: 1 5/16” Model: 2600

Q10938T Q10960BT

Desc: WoodchuckKerf: 3.7”Bolt Sz: 7/8”x14NFBolt C/C: 2” Models: 5237,5600,7600

Desc: WoodchuckKerf: 2.82”Bolt Sz: 7/8”x9NCModel: 5400

Desc: WoodchuckKerf: 2.133”Bolt Sz: 5/8”x18NFModel: 950

Q11227TQ11226T

Desc: WoodchuckKerf: 3.75”Bolt Sz: 7/8”x14NFBolt C/C: 2” Model: 6600

Revi

sed

Augu

st 2

014

Check out our Facebook page for more info and promotions.www.facebook.com/quadco

800.668.3340

WE SUPPLY DRUMS AND TEETH FOR ANY MOWER

Desc: WoodchuckKerf: 3.41” Bolt Size: 7/8”x14NFBolt C/C: 2 1/16”Model: 9564

Q11192BT

Desc: WoodchuckKerf: 3.41” Bolt Size: 7/8”x14NFModel: 5064, 3010

Q11173ET

POWERFUL MOWER AND GRINDER TEETHFOR THE RIGHT APPLICATION

Q10867T Q10762T Q10942T Q10748TQ10607TTOOTH & SPECSGRINDER

BRAND

TOOTH & SPECS

TOOTH & SPECS

TOOTH & SPECSQ10771BT Q11000BTQ11022-BT Q10938T Q11192BT

®

®

® ®

® ® ®Desc: WoodchuckKerf: 3.41” Bolt Size: 7/8”x14NFBolt C/C: 2 1/16”Model: 9564

Q11192BT

Fecon ®, FAE ®, ASV ®, Bobcat ®, CAT ®, John Deere ®, Rayco ®, Peterson ®, Morbark ®, DuraTech ®, Diamond Z ®, Vermeer ®, CBI ®, Lamtrac ®, Nokamic ®, Denis Cimaf ®, and Precision Husky ® are registered trademarks owned by each respective company named. QUADCO products are not necessarily affiliated or sponsored by any of the companies listed here.

PETERSON

MORBARK

RAYCO

VERMEER CBI

DURATECH DIAMOND Z

PRECISIONHUSKY

Available for all popular forestry mower & horizontal

grinder models

YOUR ULTIMATE SOURCE FORFORESTRY TEETH & ATTACHMENTS

MOWER & GRINDER TEETH POCKET GUIDE

Fecon ®, FAE ®, ASV ®, Bobcat ®, CAT ®, John Deere ®, Rayco ®, Peterson ®, Morbark ®, DuraTech ®, Diamond Z ®, Vermeer ®, CBI ®, Lamtrac ®, Nokamic ®, Denis Cimaf ®, and Precision Husky ® are registered trademarks owned by each respective company named. QUADCO products are not necessarily affiliated or sponsored by any of the companies listed here.

®

Mower/Mulcher Application ChartTOOTH & SPECS

Q10935T Q10987X

Desc: WoodchuckFunction: RotatesKerf: 2”Req’d Adapter: Q10936BBolt Size: 3/4”NFx3”Bolt: 02121648

Desc: Carbide, 4-tipFunction: RotatesKerf: 2.25”Req’d Adapter: Q10936BBolt Size: 3/4”NFx3”Bolt: 02121648

Desc: WoodchuckFunction: RotatesKerf: 2.1”Req’d Adapter: Q11028-BBolt Size: 5/8”NFx2 1/2”Bolts: 02101840 (2)

Desc: Carbide, 4-tipFunction: Rotates Kerf: 2.25”Req’d Adapter: Q11028-BBolt Size: 5/8”NFx2 1/2”Bolt: 02101840 (2)

Q10924T Q10975X

Q11098ET

Desc: WoodchuckFunction: RotatesKerf: 2”Req’d Adapter: Q11126Fits Holders: Q10705T, Q10888T, Q10700TBolt Size: 5/8”NFx2 1/4”Bolt: 02101836

Desc: CarbideFunction: N/AKerf: 2.25”Fits Holders: Q10705T, Q10888T, Q10700TBolt Size: 5/8”NFx1 1/2”Bolt: 02101824

Q10985CX-2

Desc: CarbideFunction: N/AKerf: 1.625”Fits Holder: Q10705T, Q10888T, Q10700TBolt Size: 5/8”NFx1 1/2”Bolt: 02101824

Q10560DX

®

1 BOLT

Desc: Tooth HolderBolt: 01M24200100109Nut: 0HNNL-M24

Q10705T

®

2 BOLTTOOTH & SPECS

TOOTH & SPECS

®

®

Q10924T Q10975X

TOOTH & SPECS

®

®

Desc: WoodchuckFunc: ReversibleKerf: 2.313”Hldrs: Q10857, Q10857CSpcr: Q11201CTBolt Sz: 1”NFBolt: 011614608

Desc: BeaverFunc: Rotates& ReversibleKerf: 2.3125”Hldr: Q10857Spcr: Q10632TBolt Sz: 1”NFBolt: 011614648

Q10639T Q11200BT Q11280XQ10766BT

Desc: WoodchuckFunc: RotatesKerf: 3”Hldr: Q10857Bolt Sz: 1”NFBolt: 011614608

Desc: CarbideFunc: N/AKerf: 2.25”Hldr: Q10857Bolt Sz: 1”NFBolt: 011614568

Q10639T

Desc: BeaverFunc: Rotates& ReversibleKerf: 2.3125”Hldr: Q10857CSpcr: Q10632TBolt Sz: 1”NFBolt: 011614648

Q11205X Q11210X

Desc: Carbide, 4-tipFunc: Rotates Kerf: 2.25”Hldr: Q10857CBolt Sz: 1”NFBolt: 011614568

Desc: CarbideFunc: N/A Kerf: 2.25”Hldr: Q10857CBolt Sz: 1”NFBolt: 011614568

Desc: WoodchuckFunc: ReversibleKerf: 2.313”Hldr: Q10857CSpcr: Q11201CTBolt Sz: 1”NFBolt: 011614648

Q11200BT

®

®

Desc: WoodchuckFunction: RotatesKerf: 2.247”Req’d Adapter: N/A Bolt Size: M14x1.5x30mmBolt: 02M14150030129

Desc: Carbide, 4-tip Function: RotatesKerf: 2.25”Bolt Size: 5/8”NF

Desc: SteelFunction: RotatesKerf: 2.1”Bolt Size: 5/8”NF

Q11236T

ASV® Req’d Adapter: Q11187-B Bolts: 02101864 & 02101868Bobcat® Req’d Adapter: Q11125-B Bolts: 02101860 & 02101868Cat® Req’d Adapter: Q11028-B Bolts: 02101840 (2) Deere® Req’d Adapter: QJD10037 Bolts: 02101856 & 02101868Rayco® Req’d Adapter: Q11028-B Bolts: 02101840 (2)

ASV® Req’d Adapter: Q11187-B Bolts: 02101864 & 02101868Bobcat® Req’d Adapter: Q11125-B Bolts: 02101860 & 02101868Cat® Req’d Adapter: Q11028-B Bolts: 02101840 (2)Deere® Req’d Adapter: QJD10037 Bolts: 02101856 & 02101868 Rayco® Req’d Adapter: Q11028-B Bolts: 02101840 (2)

DML/HY

MOWERBRAND

FECON

FAE

ASV

BOBCAT

CAT

JOHNDEERE

RAYCO

LAMTRAC

Desc: CarbideFunction: N/AKerf: 2.25”Sleeve: Q11231Bolt Size: 3/4”NFx3 1/2”Bolt: 02121656

Desc: WoodchuckFunction: N/AKerf: 2.25”Sleeve: Q11231 Bolt Size: 3/4”NFx3 1/2”Bolt: 02121656

Q11290X Q11255BT

NOKAMIC® DENISCIMAF®

Q11246T

Q11262T

Desc: WoodchuckFunction: RotatesKerf: 2.247”Req’d Adapter: N/A

Q11239T

Desc: Carbide, 2-tip Function: N/AKerf: 2.25”Bolt Size: 3/4”NF

Desc: CarbideFunction: N/AKerf: 3”