PASTES THREAD PASTES/ANTI-SEIZE Molykote® 1000 Molykote® HSC Plus Molykote® P-37 Molykote® P-74 ASSEMBLY PASTES Molykote® D Molykote® G-n Plus Molykote® G-Rapid Plus Molykote® M-77 GREASE PASTES Molykote® Cu-7439 Plus Molykote® DX Molykote® E Molykote® P-40 Molykote® P-1900 Molykote® TP-42 GREASES MINERAL OIL GREASES Molykote® 1102 Molykote® 1122 Molykote® 165 LT Molykote® BR2 Plus Molykote® FB 180 Molykote® G-0010 Bearing Grease Molykote® G-0052FG EP White Food Grade Molykote® G-67 Molykote® Longterm 00 Molykote® Longterm 2 plus Molykote® Longterm W2 SEMI-SYNTHETIC GREASES Molykote® PG-75 SYNTHETIC GREASES, PAOMolykote® EM-30L Molykote® EM-50L Molykote® EM-60L Molykote® G-4500 Molykote® G-4700 Molykote® YM-103 SYNTHETIC GREASES, POE Molykote® BG-20 SYNTHETIC GREASES, FLUROSILICONE Molykote® FS 1292 Molykote® FS 3451 Molykote® FS 3452 SYNTHETIC GREASES, PFPE Molykote® HP-300 Molykote® HP-870SYNTHETIC GREASES, SILICONEMolykote® 33 Light Molykote® 33 Medium Molykote® 41 Molykote® 44 Light
Molykote® 44 Medium Molykote® 55M Dow Corning® High Vacuum Grease Molykote® PG-21 Molykote® PG-54 COMPOUNDS Molykote® 111 Compound Dow Corning® 4 Compound Dow Corning® 7 Compound Dow Corning® 340 Heat Sink Compound HIGH PERFORMANCE INDUSTRIAL LUBRICATING OILSMULTI-PURPOSE GEAR OILSMolykote® L-0532FG Molykote® L-1122 Molykote® L-1132 Molykote® L-1122FG Molykote® L-1146FG CHAIN OILS Molykote® L-1428 Molykote® L-1468FG Molykote® CO 220 Molykote® C40 High Temp Lubricant Molykote® Omnigliss Molykote® MKL-N COMPRESSOR OILS Molykote® L-4640 ( Flush oil ) Molykote® L-4646 ( POE ) COATINGS ANTI-FRICITON COATINGS Molykote® 106 Molykote® D-321R Molykote® 3400A Leadfree Molykote® 3402C Molykote® 7400 Molykote® 7405 Molykote® 7409 Molykote® D-10 Molykote® PTFE-N UV OTHER COATINGS Molykote® Metal Protector Plus SOLVENTS Molykote® 7414 DISPERSIONS Molykote® M-55 Plus Molykote® Multigliss OTHER PRODUCTS Molykote® Food Grade Spray Oil Molykote® Supergliss Molykote® 316 Silicone Release Spray Dow Corning® 557 Silicone Spray Molykote® S-1011 POWDERS Molykote® Microsize Molykote® Z
MOLYKOTE® Omnigliss SprayQuick-action penetrating agent
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Quick-action penetrating agent incorporating corrosion protection, water-repellent and lubricating properties
Standard Unit Result
APPLICATIONS
• Suitable for frictional contacts, running at low to medium speeds, which are not equipped with grease nipples or oiling holes.
• Used on joints, levers, chains and other components of transport and conveyor equipment, textile machinery, automatic filling units and all types of packaging equipment.
Color Light amber
DensityDensity at 20°C 0.84g/mlViscosity at 40°C 11.8mm²/s
TemperatureService temperature -30 to +80°C
Load-carrying capacity, wear protection, service lifeFour-ball tester (VKA)Weld load 2900NDIN 51 350 pt.4Weld scar under 800N load 1.1mm
FEATURES
Good penetration•
Water repellent•
High pressure resistance•
Temporary corrosion protection•
COMPOSITION
Mineral oil•
Solid lubricants•
Corrosion inhibitors•
Stabilizer•
HOW TO USE
How to apply
Shake before use. Can be applied with brush, oil can, spray-can, hand-held or compressed-air spraying equipment, or by dipping. On badly corroded parts, allow longer to react. Repeat if necessary.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE
SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
05/01/1998
DC 3630Ref. no. 71-0173A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® 106Anti-friction Coating
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Heat-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• For smooth coating of metal/metal combinations.
• Maintenance-free, permanent lubrication of highly stressed friction combinations with low speeds or oscillating operation.
• Used where design construction prevents the use of oil or grease or where the risk of soiling is undesirable.
• This product is used successfully for the dry lubrication of locks, hinges, joints, magnetic armatures and for the anti-seizure coating of engine and gear components.
Color Dark grey
Physical propertiesViscosity at 20°C (DIN3 cup) 42sDIN 53211/3Density at 20°C 1.16g/mlDIN 53217/2Non-volatile content 41%CTM 0242 I
TemperatureCuring time 60/150minutes/°CCuring time 30/180minutes/°CService temperature range -70 to +250°C
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ p=13600*
s=11300*NASTM-D2625
LFW-1, rotating¹ p=187*ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutesno. of revolutions x1000 to μ=0.1LFW-1, oscillating¹ p=409*ASTM-D2714F=900N, frequency=89.5osc./minutesno. of oscillations to μ=0.08
Corrosion protectionSalt spray test 2hISO/R 1456
1. * Surface:p = phosphatized, s = sand-blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
FEATURES
Low coefficient of friction•
High load carrying capacity•
Protection from corrosion•
Good adhesion•
Can be painted over•
COMPOSITION
Solid lubricants•
Organic binder•
Solvent•
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE 106 Anti-Friction Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm.
Curing
60 minutes at 150°C, 30 minutes at 180°C(Object temperature).
Solubility
Thinning can be carried out using MOLYKOTE® L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, MOLYKOTE 106 Anti-Friction Coating has a usable life of 36 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
19/11/1998
DC 2935Ref. no. 71-0154B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® 1102Grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
For gas taps and cocks with metal, glass and plastic combinations
Standard* Unit Result
APPLICATIONS
• Used successfully with natural gas stop-cocks of main and secondary lines in domestic equipment, instantaneous water heaters and similar equipment.
• Lubrication of smaller taps made of metal, glass or plastic.
Color Black
Consistency, density, viscosityConsistency class, NLGI¹ ca. 3DIN 51 818Worked penetration 205-240mm/10ISO 2137Density at 20°C 0.96g/mlISO 2811Base oil viscosity at 40°C 900mm²/sDIN 51 562Base oil viscosity at 100°C 42mm²/sDIN 51 562
TemperatureService temperature range 0 to +160
short term +220°C
Drop point None°CISO 2176
Loading capacity, protection against wearFour-ball testerWeld load 2100NDIN 51 350 T.4Wear scar under 800N load 0.85mmDIN 51 350 pt.5Almen-Wieland machineOK load 14500NFrictional force with OK load 1300N
ResistanceWater resistance, static evaluation step 0-90DIN 51 807 T.1Oxidation resistance, pressure drop 100h, 99°C
1.3barDIN 51 808
Oil separationStandard test 0.0%DIN 51 817
1. National Lubricating Grease Institute.* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
FEATURES
Highly resistant to water•
No drop point therefore no melting or leakage from lubrication points
•
COMPOSITION
Mineral oil•
Inorganic thickener•
Solid lubricants•
HOW TO USE
How to apply
Clean the contact areas. As is usual with lubricating greases, apply by
means of a brush, spatula, grease-gun or automatic lubrication device. Can be used in central lubrication systems. If plastics or elastomers are present, compatibility tests for swelling and
shrinkage, stress-crack formation, changes in strength and hardness, should be carried out because of the difference in their qualities.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
23/11/1998
DC 2941Ref. no. 71-0146B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
�������� � � � �������������� ������
������������ ��������� ���� � ��� ��������� �������� ��� ��� � ��������� ������ �� ������ ���� ���� � ���� ��������� �����
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� !��� �
������!���%& "����!%& '������!%
�"# $% &%& #�'" �� � ��� ��� %�(
"�) (%*+ !��,�� ������� ���%- (&-�*.-
"�) (&%% �� �� � (-/ 01&/23 ���� %�(&
�"# $% $1( 4� � ��� �� �� �� � ($/ 0++/23 ��(� %---
��()���!���
������� ��������� / �.- � 5(-- 05(*-��� ��� ������ 3
/2 �.- � 5*6( 05..1��� ��� ������ 3
"�) (%+1 ���� ��� / 7($-
/2 7.&(
8��9��%.+&&- ��� ��������� ��:�� � � �*-/ 0�((/23
"���� ����,����� ��:�� #� %%&;%-�*
���:�� ���� (- ���� ���� ��� #� .%;%-�*
8��9��%.+&&- ��� ��������� ��:�� � � �.-/ 0�.-/23
"���� ����,����� ��:�� #� &$1;%-�*
���:�� ���� (- ���� ���� ��� #� $1;%-�*
���"�����%��* ��)���!%
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # *.--
��� ��)���!���
�"# $% &%+ ������ � > -�*
? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�% ��� ������ ������ � 8���� ���� �� �� ����� ��� � �� � ��� �@ ���� ��� �� ������� ��������� � ���
9)�A=)�B 2� %(6( '��� � �� ��� �� � ������ �� ��������� � �� ��� � ��; ��� ���� ���� � �
�����"��! ��.��(�!���
���������������
���$ ��
� ����������� ������ ��� ���������������� �� ����� �� � �;������ �������� ����� �;�����
� C��� ���� ��� 7($-/ 0.&(/23D�� �:���� ������� �� , �� ����� ������� ���� ��������� ���
� !��� ������ ��������� ����@�.-/ � 5(--/ 0�.-/2 � 5*6(/23D��� ��� ������ @ �� � (*-/ 0..1/23
� C��� �� � ��� � ���� �� ������ ���
� E� � � � ������ ���@ ���� �� �����������
�����������
� 2����� ������ ���� )����� ���,���
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 2� %(6( 2������������� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -&�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%1$ �-% � (66% J-�(--( ��� ���� ��������� 8�� ���� �� ������
�������� �56 ������-7��� *�����
����-7��� *����� .�� !7� ��8����!��� �. 7�*7�% �!�����" �)��*���� ��" ��"����* *���� (�"� �. (�!��& -�!7 � )���)7���� �)��"�. �) !� 36 (9�
������������� )�� ���� �� ��� ��K���� � ���� �� � �� ��� ������ ����� �� ����� ����� � �� � ��� ��� ��� �� � �� �� �� ���� �� ������� ����� �� �����@ ���,������ ��� � �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,
������!���%& "����!%& '������!%
"�) (%*+ I���,�� ������� ���%- (.-�(+-
"�) (&%% �� �� � (-/ 01&/23 ���� -�61
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23% ��(� *(-
��()���!���
������� ��������� ���� / �($ � 5%(-
/2 �%* � 5(.&
"�) (%+1 ���� ��� / %+$
/2 *.+
8��9�%.+&&- ��� ��������� ��:�� � � �(-/ 0�./23
4���,����� ��:�� #� &&-;%-�*
���:�� ���� (- ���� ���� ��� #� %%$;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ��� � �(-/ 0�./23 ���� %*$-
���"��* ��)���!%& )��!��!��� �*����! -���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # ..--
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� %�(
8����!����� ������
)= ���� # (----
2������� ����� ��� )= ���� # (6--
��������� )��!��!���
�"# $% &-( �=2�B���� �����
������ �� ����� �� -
����!����
�"# $% &-+ ��% !��� �� � ���@ ��� �������� �� (�6-
�"# $% &-& );����� �� � ���@ ��� ��� ���� %--�@66/ 0(%-/23
��� -�(
�����"��! ��.��(�!���
���������������
���$ ��
� B;������ ���� ������������ �������� !��� ������� �� ������� �� �;� ������ � ���� ��� ���, ������������@ ��� � �� ���� ������� ���������� � �� ���� �� B;���������� ��� ��� � ������� ���� ����������
� '��� ������� ���� ����� ��0����� �� ���; - ��� � �� � �� ���=2�B���� �����3
� ��� � ���� �� ��,��
�����������
� 9����� ���� ������ ���� ����� ������� � ���� �� �������� 8��� �� ��������� B� �������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��� ��)���!���
�"# $% &%+ ������ � > %�(
%� �������� �� �� �� ����� �� �� � ��� ��;����? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�% �������� ���� �� ���� ������ ������� � �� � ����� �� ��� ��
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B %1$ �� '�������� ���� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (&�-%�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%+6 �-% � (6*6 J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
Product Information High Performance
Molykote® 33 Extreme Low Temperature Bearing Grease, Molykote® 41 Extreme High Temperature Bearing Grease, Molykote® 44 High Temperature Bearing Grease
Lubricants
FEATURES Lubricants for antifriction bearings and plastic and rubber parts
USESAll three Molykote® Bearing Grease are used to lubricate ball bearings operatingunder light to moderate loads. These can be used for:
Molykote® 33 Extreme Low Temperature Bearing Grease• Freezer cart casters and cold room conveyor equipment• Utility disconnect switch contacts• Plastic electric clock motors• Maximum-demand meters, power-factor meters, watt-hour meters• Windshield wiper motor gears• Photographic, optical and surveying equipment• Oscillographs, geophysical and light, low-torque instruments• Starter clutch drives
Molykote® 41 Extreme High Temperature Bearing Grease• Antifriction bearings of high-temperature equipment• Oven conveyor bearings• Wheel bearings of core oven carts• Governor linkage of steam turbines• Ball and socket connections of power insulators
Molykote® 44 High Temperature Bearing Grease • Kiln preheater fans, oven fans, radiator cooling fans• Textile slashers and driers• Aircraft engine• Conveyor systems
These greases do not soften or affect most plastics and are used to lubricateplastic gears, bearings and cams, as well as metal and rubber parts. Because of low torque requirements, Molykote® 33 Extreme Low Temperature BearingGrease is especially effective in equipment that must start in extreme cold.
Oxidation Resistance – Molykote® Bearing Greases are recommended for use inunits that must remain operable when subjected not only to low and highoperating temperatures, but also to severe weathering and oxidation.
� Resistance to oxidation, moisture andcorrosive atmospheres
� Inertness� Good shear stability� Wide service temperature range:
33 Extreme Low TemperatureGrease: -100 to 400°F (-73 to 204°C)41 Extreme High TemperatureGrease: 0 to 550°F (-18 to 288°C)44 High Temperature Grease: -40 to 400°F (-40 to 204°C)
� Compatible with many plastics
COMPOSITION� Lithium soap� Phenylmethyl silicone oil
TYPICAL PROPERTIESSpecification Writers: These values are not intended for use in preparing specifications. Please contact your localDow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Method Test Results
33 Light 33 Medium 41 Grease 44 Light 44 Medium
Color Off White Off White Black Off White Off White
Thickner Lithium Soap Lithium Soap Carbon Black Lithium Soap Lithium Soap
Base Oil Silicone Silicone Silicone Silicone Silicone
DIN 51 562 Base Oil Viscosity @ 25°C, mm2/s 100 100 316 125 125
ASTM D 217 Penetration, worked 60 strokes, mm 320 280 280 300 280
NLGI # 1 2 2 ~1 2
DIN 51 350 pt4 4 ball weld load, N (kg) 1200 (122) 1200 (122) 1500 (152) 1100 (113) 1100 (113)
Max Dn Value1 (Bore Size in mm X rpm) 250,000 200,000 75,000 350,000 300,000
Service Temperature2 Degrees C (F) -73 to 204 (-100 to 400)
-73 to 204 (-100 to 400)
-18 to 288 (0 to 550)
-40 to 204 (-40 to 400)
-40 to 204 (-40 to 400)
ASTM D 2265 Drop Point Degrees C (F) 226 (439) 226 (439) >300 (>572) 220 (432) 220 (432)
Fed Std 791 Bleed after 24 hrs @149°C (300°F) % 2 1 4.8 3 2.5 2
DIN 51 817 Oil Separation (Standard Test, 7 days at 40°C) % 3.2 1.6 2.6 2.4 1.4
Specific Gravity @25°C (77°F) 0.97 0.97 1.14 1.05 1.05
ASTM D 1478-80 Low Temperature Torque @ -73°C
Initial Break-away Torque, Nm 130 x 10 -3 164 x 10 -3
Torque after 20 minutes running time, Nm 13 x 10 -3 22 x 10 -3
Low Temperature Torque @ -40°C
Initial Break-away Torque, Nm 225 x 10 -3 336 x 10 -3
Torque after 20 minutes running time, Nm 60 x 10 -3 124 x 10 -3
DIN 51 808 Oxidation Resistance, pressure drop 100hr,99°C (210°F) bar (psi) 0.4 (5.80) 0 0.1 (1.45)
DIN 51 821-02-A FAG Rolling Element Bearing Tester, FE9, 1500/6000-150, F50, Hrs 110 110
1Maximum Dn values are approximations and will vary widely with temperature, load and bearing type.
Molykote® 33 Extreme LowMolykote® 41 Extreme HigMolykote® 44 High TempeRef. No. 10-814C-01
2Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specificapplication environment.3Values are at 392°F (200°C).Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may beobtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
Figure 1. Suggested Product Temperature Range Recommendations
Limitations of Typical Organic Greases
-100°F -20°F 260°F 450°F 550°F
Molykote® 33 Extreme Low Temperature Grease
We help you invent the future is a trademark of Do Temperature Bearing Grease w Corning Corporation.h Temperature Bearing Grease egistered trademark of Dow Corning Corporation.rature Bearing Grease ow Corning is a registered trademark of Dow Corning Corporation.
DIC164544 �2006 Dow Corning Corporation. All rights reserved.
Molykote is a rMay 4, 2006, DMolykote® 44 High Temperature Grease
Molykote® 41 ExtremeHigh Temperature Grease
DESCRIPTIONMolykote® 33 Extreme Low Temperature Bearing Grease,Molykote® 41 Extreme High Temperature Bearing Grease and Molykote® 44 High TemperatureBearing Grease are silicone lubricatingoils with thickeners added.Molykote® 33 Extreme Low Temperature Bearing Grease and Molykote® 44 High TemperatureBearing Grease are thickened with aspecial lithium soap; Molykote® 41Extreme High Temperature BearingGrease is thickened with carbon black.
Molykote® 33 Extreme Low Temperature Bearing Grease and Molykote® 44 High TemperatureBearing Grease are available in light and medium consistencies – NLGI #1and #2. Molykote® 41 Extreme HighTemperature Bearing Grease is available in a medium consistency – NLGI #2.
LISTINGS/SPECIFICATIONSMolykote® 33 Extreme Low Temperature Bearing Grease is USDA listed for use as a lubricant where thereis no possibility of food contact.
HOW TO USE Conventional grease applicationmethods – brushing, grease gun orautomatic application – are suitable for use with these Molykote® Bearing Greases. Laboratory tests and fieldreports indicate that “heavy duty” guns available from such manufacturers asLincoln-St. Louis are preferred.
Note: Extra care should be taken at all times to prevent dirt fromcontaminating the lubricant. Thesegreases should be packed with a cleanmetal or ebonite spatula.
LIMITATIONSThese greases should not be applied tosurfaces that are to be painted. Thesegreases should not be used with highlyloaded ferrous metal bearing
combinations, especially where slidingfriction is encountered.
Molykote® 41 Extreme High Temperature Bearing Grease – Bearings operating at extremely hightemperatures need to be frequently monitored to ensure that the grease hasnot dried out. If this occurs, moregrease can be added, or the existinggrease rejuvenated by addingDow Corning® 710 Fluid.
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
SHIPPING LIMITATIONSNone.
USABLE LIFE AND STORAGEWhen stored at or below 90°F (32°C),Molykote® 33 Extreme Low Temperature Bearing Grease,Molykote® 41 Extreme High Temperature Bearing Grease and Molykote® 44 High TemperatureBearing Grease have a shelf life of60 months from date of manufacture.Refer to product packaging for “UseBy” date.
PACKAGINGNot all sizes available in all geographies.
Molykote® 33 Extreme Low Temperature Bearing Grease is supplied in 100-g tubes, 150-g tubes,400-g cartridges, 1-kg cans, 3.6-kgcans, 18-kg pails, 25-kg pails, 55-kgdrums, and 180 kg drums.
Molykote® 41 Extreme High Temperature Bearing Grease is supplied in 100-g tubes, 150-g tubes,400-g cartridges, 1-kg cans, 3.6-kgcans, 5-kg pails, 18-kg pails, 25-kgpails, and 181.4-kg drums.
Molykote® 33 Extreme Low Temperature Bearing Grease We help you invent the future is a trademark of Dow Corning Corporation.Molykote® 41 Extreme High Temperature Bearing Grease Molykote is a registered trademark of Dow Corning Corporation.Molykote® 44 High Temperature Bearing Grease May 4, 2006, Dow Corning is a registered trademark of Dow Corning Corporation.Ref. No. 10-814C-01 DIC164544 �2006 Dow Corning Corporation. All rights reserved.
Molykote® 44 High TemperatureBearing Grease is supplied in 100-gtubes, 150-g tubes, 400-g cartridges,
3.6-kg cans, 5-kg pails, 18-kg pails,25-kg pails, and 180-kg drums.
HANDLING PRECAUTIONSProduct safety information required forsafe use is not included. Beforehandling, read product and safety datasheets and container labels for safe use, physical and health hazardinformation. The material safety datasheet is available on the Dow Corningwebsite at www.dowcorning.com. Youcan also obtain a copy from your localDow Corning sales representative or Distributor or by calling your localDow Corning Global Connection.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their productsafety needs, Dow Corning has an extensive Product Stewardshiporganization and a team of ProductSafety and Regulatory Compliance(PS&RC) specialists available in eacharea.
For further information, please see ourwebsite, www.dowcorning.com or consult your local Dow Corningrepresentative.
Molykote® 33 Extreme Low Temperature Bearing Grease We help you invent the future is a trademark of Dow Corning Corporation. Molykote® 41 Extreme High Temperature Bearing Grease Molykote is a registered trademark of Dow Corning Corporation. Molykote® 44 High Temperature Bearing Grease May 4, 2006, Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 10-814C-01 DIC164544 �2006 Dow Corning Corporation. All rights reserved.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product InformationSilicon-Based
Compounds
FEATURES• High thermal conductivity• Low bleed• Stable at high temperatures
COMPOSITION• Greaselike silicone fluid thickened
with metal oxide filler
Dow Corning® 340Heat Sink Compound
Compound provides thermal coupling of electrical/electronicdevices to heat sinks
USESDow Corning® 340 Heat Sink Compound is applied to the base and mountingstuds of transistors, diodes and silicon-controlled rectifiers. It can also serve as aneffective thermal coupler for many heat sink devices where efficient cooling isrequired. It is also suitable for aircraft engines where heat sink properties arerequired.
This product has also been used as a high-voltage corona suppressant, nonflammablecoating in connections for flyback transformers and TV sets and similar applications.
TYPICAL PROPERTIESSpecification Writers: Please contact your local Dow Corning sales office or your GlobalDow Corning Connection before writing specifications on this product.
Method Test Unit ResultColor White
ASTM D 217 Consistency, Penetrationunworked 300worked 60 strokes 275worked 100,000 strokes 245
Fed. Std. 791, Bleed after 24 hr at 392°F (200°C) percent 0.05Method 321.2Fed. Std. 791, Evaporation after 24 hr at 392°F (200°C) percent 0.5Method 321.2ASTM D 2265 Drop Point °F (°C) 570 (300)ASTM D 1475 Specific Gravity at 77°F (25°C) 2.1CTM1 0069 Thermal Conductivity, K Factor cal/sec-cm-°C 0.0014ASTM D 149 Dielectric Strength2 volts/mil 210ASTM D 495 Arc Resistance seconds 165ASTM D 150 Dielectric Constant,
at 100 Hz 5at 100 kHz 5
ASTM D 150 Dissipation Factor,at 100 Hz 0.01at 100 kHz 0.02
ASTM D 1169 Volume Resistivity ohm-cm 2 x 1015
ASTM D 4049 Water Spray Off percent 1.31CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances.2Measured using a sample thickness of 50 mils.
DESCRIPTIONDow Corning 340 Heat Sink Compoundis a grease-like silicone material, heavilyfilled with heat conductive metaloxides. This combination promoteshigh thermal conductivity, low bleedand high-temperature stability.
The compound resists changes in con-sistency at temperatures up to approxi-mately 350°F (177°C). In doing so, ithelps maintain a positive heat sink sealto improve heat transfer from theelectrical/electronic device to the heatsink or chassis, thereby increasingoverall efficiency of the device.
Printed in USA Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 10-748B-01 AGP5223 ©1997, 1999, 2000 Dow Corning Corporation. All rights reserved.
HANDLING PRECAUTIONSPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED IN THIS DOCUMENT.BEFORE HANDLING, READPRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESEN-TATIVE, OR DISTRIBUTOR, ORBY CALLING YOUR GLOBALDOW CORNING CONNECTION.
USABLE LIFE ANDSTORAGEDow Corning 340 Heat Sink Com-pound has a shelf life of 60 monthsfrom date of manufacture. Refer toproduct packaging for “Use By” date.
PACKAGINGDow Corning 340 Heat Sink Com-pound is available in 5-oz (142-g)tubes, 13.5-oz (383-g) weight/5.75-fl oz (170-mL) volume Semco®
cartridges, 20-lb (9-kg) pails, and275-lb (124.7-kg) drums for produc-tion lines and large scale operations.All weights, net.
LIMITATIONSThis product is neither tested norrepresented as suitable for medicalor pharmaceutical uses.
SHIPPING LIMITATIONSNone.
WARRANTY INFORMATIONThe information contained herein isoffered in good faith and is believedto be accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, this
information should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fully satisfactoryfor the intended end use.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment. Your exclusive remedyfor breach of such warranty is limitedto refund of purchase price or replace-ment of any product shown to be otherthan as warranted. Dow Corning speci-fically disclaims any other express orimplied warranty of fitness for a par-ticular purpose or merchantability.Unless Dow Corning provides youwith a specific, duly signed endorse-ment of fitness for use, Dow Corningdisclaims liability for any incidental orconsequential damages. Suggestions ofuse shall not be taken as inducementsto infringe any patent.
MOLYKOTE® 3400 AThermosetting anti-friction coating
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Thermosetting anti-friction coating for metal/metal combinations involving slow to medium-fast movements and medium to heavy loads
Standard Unit Result
APPLICATIONS
• Suitable for permanent lubrication, with simultaneous corrosion protection, of friction contacts involving high compressive stress and low speeds, and wherever oils or greases cannot be used for technical reasons or are undesirable because of the risk of soiling.
• Used successfully on hinge pins, plain bearings, cams, keyways and dentate couplings on aircraft, on pins, springs and bearing surfaces of motor-car brakes, moving parts of locks, switches and regulators; on special chains and on all types of magnetic armature.
Color Grey
DensityDensity at 20°C 1.2g/mlISO 2811
TemperatureService temperature -200 to +430°C
Load-carrying capacity, wear protection, service lifeFalex pressure resistance¹ p=20000*NASTM-D2625LFW-1, rotatingF=2860, N,n=72 rpm, v=7.9 min, no.of revolutions to μ=0.1¹
p=85000*ASTM-D2714
LFW-1, oscillating, load 900N, frequency=89.5 os./min. no. of oscillations to μ=0.08¹
p=42000*
1. * Surface: p = phosphatised
FEATURES
Outstanding corrosion protection•
Excellent adhesion to metal•
Low friction coefficient•
High resistance to oil and fuels•
Prevents fretting corrosion•
Exceptionally wide service temperature range (-198 to +430°C)
•
High abrasion resistance, consequently long service life
•
High compressive strength•
COMPOSITION
Solid lubricants•
Corrosion inhibitors•
Organic binders•
Solvents•
HOW TO USE
How to apply
Carefully degrease friction surfaces with solvent and allow solvent to evaporate completely. Stir the anti-friction coating thoroughly and apply by spraying, dipping, painting or centrifuging (dilute with MOLYKOTE® L 13 - approximately 10-20%). The friction surfaces should be coated as evenly and thinly as possible. Annealing: 2 hours at 150°C
or 1 hour at 200°C.
Diluting agent: L 13 thinners.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH
HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, MOLYKOTE 3400 A Thermosetting Anti-Friction Coating has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in
effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1998-2001 Dow Corning Corporation. All rights reserved.
03/03/1998
DC 2995Ref. no. 71-0030A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® 3402 CAnti-friction Coating
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• Excellent combination of corrosion protection and lubrication.
• Used on main axle threads of drill hammers, spindles.
Color Grey
Physical propertiesViscosity at 20°C or 68°F (DIN3 cup) 47sDIN 53211/3Density at 20°C (68°F) 1.08g/mlDIN 53217/2Non-volatile content 34.5%CTM 0242 IStorage life 5years
TemperatureDrying time at 20°C (68°F) 15minutesCuring time 120/20minutes/°CCuring time 120/68minutes/°FService temperature range -200 to +310°CService temperature range -328 to +590°F
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ s=10700NASTM-D2625LFW-1, rotating¹ s=45ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutesno. of revolutions x1000 to μ=0.1LFW-1, oscillating¹ s=25ASTM-D2714F=900N, frequency=89.5osc./minutesno. of oscillations to μ=0.08
ResistanceRadiation resistance 10¶rad
1. Surface pretreatment: s = sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
FEATURES
Excellent corrosion protection•
Excellent lubricity•
Air-curing•
Strong pressure and wear resistance•
COMPOSITION
Solid lubricants•
Organic binder•
Corrosion inhibitor•
Solvent•
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE 3402 C Anti-Friction
Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm.
Curing
120 minutes at 20°C (68°F).
Solubility
Thinning can be carried out using MOLYKOTE® L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C (68°F) in the original unopened containers MOLYKOTE 3402 C Anti-friction Coating has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health,
Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
13/03/2000
DC 3634Ref. no. 71-0041D-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
P R O D U C T I N F O R M A T I O N
Information AboutMOLYKOTE® 3451Chemical ResistantBearing Grease andMOLYKOTE® 3452Chemical ResistantValve Lubricant
TypeFluorosilicone greases
Special PropertiesChemical resistance; good load-carrying ability, effective in hightemperatures
Primary Uses–MOLYKOTE® 3451 Chemical
Resistant Bearing Grease –NLGI #2
Exceptional antifrictionlubricant for bearings exposed toharsh chemicals, solvents, hightemperatures, high speeds orheavy loads
– MOLYKOTE ® 3452 ChemicalResistant Valve Lubricant –NLGI #3
Lubricant and sealant for valves,shafts and packings exposed tocorrosive or aggressive chemicalsor high temperatures
DESCRIPTIONMOLYKOTE 3451 Chemical ResistantBearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricant arefluorosilicone oils thickened withfluorinated polymers. These lubricants:
Provide superior resistance to mostchemicals
Are compatible with most gaskets,seals and packings
Resist washout by water, fuels, oilsand solvents
These greases lubricate over a widetemperature range. MOLYKOTE 3451Chemical Resistant Bearing Grease hasgood life at temperatures from -40 to450°F (-40 to 232°C);MOLYKOTE 3452Chemical Resistant Valve Lubricanthas a serviceable temperature rangefrom -20 to 450°F (-29 to 232°C). BothMOLYKOTE 3451 Chemical ResistantBearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricantresist deterioration by solvents, acids,chlorides and other severe chemicalsas well as low-pressure steam andcondensate. (See Table I.)
Bearing tests show MOLYKOTE 3451Chemical Resistant Bearing Grease hasgood life at varying high loads andspeeds.
USESMOLYKOTE 3451 ChemicalResistant Bearing GreaseMOLYKOTE 3451 Chemical ResistantBearing Grease is an exceptional anti-friction bearing lubricant especiallydesigned for applications that experiencea wide range of temperatures, loadsand speeds. It is particularly useful inbearings exposed to harsh chemicalsor solvents, bearings used at highspeeds and bearings subjected to heavyloads. MOLYKOTE 3451 Bearing Greasecan be used on:
Chemical mixers
Needle bearings in circuit breakers
Pumps
Processing equipment
Fuel- and solvent-handlingequipment
Sealed-for-life bearings that mustoperate at high speeds, heavy loads,and high and low temperatures
Valves protected by MOLYKOTE 3452 Chemical Resistant Valve Lubricant show no evidence ofcorrosion or degradation of lubricant.
BL1
7877
-1
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
.................................................................................................... Molykote Molykote.................................................................................................... 3451 3452.................................................................................................... Chemical Resistant Chemical Resistant.................................................................................................... Bearing Grease Valve Lubricant
NLGI Consistency ...................................................................... #2 #3Color ........................................................................................... White WhiteThickener ................................................................................... Fluorinated polymers Fluorinated polymers
ASTM D 217 Penetration, worked, 60 strokes ................................................ 275 270Viscosity of fluorosilicone oil at 100°F (38°C), SUS ................ 2295 46,000Service Temperature Range1, °F (°C) ...................................... -40 to 450 (-40 to 232) -20 to 450 (-31 to 232)Max. Dn Value2 .......................................................................... 200,000 75,000Specific Gravity at 77°F (25°C) ................................................. 1.44 1.50
Fed Std 791 Bleed, at 400°F (204°C), percent .............................................. 2.7 1.2ASTM 2265 Evaporation, at 400°F (204°C), percent ................................... 3.7 1.1
Dropping Point, °F (°C) ............................................................ >536 (>280) >570 (>300)ASTM D 1264 Water Washout, at 175°F (80°C), percent ................................ 0.3 0.1Fed Std 791a3 4-Ball Weld Load,Kg ................................................................... 400 400ASTM D 1478 Low-Temperature Torque
starting, g-cm at -40°F (-40°C) ............................................... 2315running, g-cm after 1 hr at -40°F (-40°C) ............................. 1960
1Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including thespecific application environment.
2Dn value = shaft size of bearing in mm x rpm; based on estimate.3Method 6503.
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for yourspecifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI.Call (989) 496-6000.
Table I: Chemical Resistance of MOLYKOTE 3451 Chemical Resistant Bearing Grease and MOLYKOTE 3452 ChemicalResistant Valve Lubricant
.......................................................................................................... MOLYKOTE MOLYKOTE
.......................................................................................................... 3451 3452
.......................................................................................................... Chemical Resistant Chemical Resistant HydrocarbonAfter 24 hours at 77°F (25°C)1 ................................................................................................ Bearing Grease Valve Lubricant Grease2
Diesel ................................................................................................ Good3 Good PoorKerosene .......................................................................................... Good Good FairSilicone Fluid ................................................................................... Fair Good PoorToluene ............................................................................................ Good Good PoorHexane ............................................................................................. Fair Fair PoorXylene .............................................................................................. Good Good PoorIsopropanol ...................................................................................... Good Good FairMethanol .......................................................................................... Good Good FairVM&P Naphtha ............................................................................... Good Good Poor1Test method Federal Standard 791C-6.2.2A lithium-thickened petroleum grease.3Good no observable effect on grease [grease slightly soft; poor adhesion]; Fair grease very soft; cracked and poor adhesion; Poor grease hardened or dissolved; noadhesion.
MOLYKOTE 3452 ChemicalResistant Valve LubricantMOLYKOTE 3452 Chemical ResistantValve Lubricant is an exceptional valvelubricant and sealant product particu-larly suited for applications where cor-rosive or aggressive chemicals are used.MOLYKOTE 3452 Valve Lubricant canbe used on:
Plug valves
Mechanical seals and packings
Slow-speed roller and journalbearings
Moderate-speed ball bearings
Instruments in high vacuum, at hightemperatures and in corrosiveatmospheres
Rotary and reciprocating shaft seals
Flexible ball joints
LIMITATIONSMOLYKOTE 3451 Chemical ResistantBearing Grease should not be appliedto surfaces to be painted.
MOLYKOTE 3451 Chemical ResistantBearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricant arenot recommended for use with highlyoxidative chemicals (liquid Cl2 orliquid O2, for example).
These greases are soluble in ketonessuch as acetone, methyl ethyl ketoneand methyl isobutyl ketone.
This product is neither tested norrepresented as suitable for medicalor pharmaceutical uses.
HOW TO USEApplicationMOLYKOTE 3451 Chemical ResistantBearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricantcan be applied using conventionalmethods of grease application brushing, grease gun or automaticapplicators.
SHIPPING LIMITATIONSNone.
STORAGE AND SHELF LIFEWhen stored at or below 90°F (32°C),MOLYKOTE 3451 Chemical ResistantBearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricanthave a shelf life of 60 months fromdate of manufacture.
Note: In storage, a small amount of oilmay separate from MOLYKOTE 3451Chemical Resistant Bearing Grease.This separation does not materiallyaffect the lubricating qualities of thegrease. Simply stir fluid back into thegrease.
PACKAGINGMOLYKOTE 3451 Chemical ResistantBearing Grease is available in tubes cartridges and pails
MOLYKOTE 3452 Chemical ResistantValve Lubricant is available in tubes, cartridges, pails.
SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS AND CON-TAINER LABELS FOR SAFE USE,PHYSICAL AND HEALTH HAZARDINFORMATION. THE MATERIALSAFETY DATA SHEET IS AVAILABLEFROM YOUR DOW CORNING REP-RESENTATIVE, OR DISTRIBUTOR,OR BY WRITING TO DOW CORNINGCUSTOMER SERVICE, OR BYCALLING (989) 496-6000.
LIMITED WARRANTY –PLEASE READ CAREFULLYDow Corning believes that theinformation in this publication is anaccurate description of the typicalcharacteristics and/or uses of theproduct or products, but it is yourresponsibility to thoroughly test theproduct in your specific application todetermine its performance, efficacyand safety. Suggestions of uses shouldnot be taken as inducements toinfringe any particular patent.
Figure 1: Percent Volume Change of Various Rubbers in MOLYKOTE 3452 Chemical Resistant Valve Lubricant
Volu
me
Cha
nge,
per
cent
Dow Corning CorporationMidland, Michigan 48686-0994
Dow Corning is a registered trademark ofDow Corning Corporation.
©1994, 1998 Dow Corning Corporation.All rights reserved.
Printed in USA AGP3853A Form No. 10-813-98B-01
Unless Dow Corning provides you witha specific written warranty of fitnessfor a particular use, Dow Corning ssole warranty is that the product orproducts, as supplied, will meetDow Corning s then current salesspecifications. DOW CORNINGSPECIFICALLY DISCLAIMS ANYOTHER EXPRESS OR IMPLIEDWARRANTY, INCLUDING THEWARRANTIES OF MERCHANT-ABILITY AND OF FITNESS FORUSE. Your exclusive remedy andDow Corning s sole liability for breachof warranty is limited to refund of thepurchase price or replacement of anyproduct shown to be other than aswarranted, and Dow Corning expresslydisclaims any liability for incidental orconsequential damages.
�������� � <=6 �������������� ������
��8����!��* ��" ������* *����� .�� (�!��9(�!��& (�!��9)���!����" (�!��9����!�(�� ��(8���!���� ��'��'��* ���- (�'�(��!���" 7��'% ���"��*� �'�� '��% -�"� !�()���!��� ���*��&)��!�������% ��"�� ��.�'���8�� ��'����(��!�� ��.�������
������������� ������� ��� �� ����� ������ ���� �� ������ ������ �� ����� ����� � �� � ����� @ ��������� ��� �� ���� @ ������� ��,��K�� @������ @ � ������ ��� ��� ��� �� ������ ������ �:������
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� !���
������!���%& "����!%& '������!%
�"# $% &%& #�'" �� � ��� ��� (�*
"�) (%*+ !��,�� ������� ���%- (.-�(&-
"�) (&%% �� �� � (-/ 01&/23 ���� %�.+
4� � ��� �� �� �� � ($/ 0++/23 ��(� %----
��()���!���
������� ��������� / �*- � 5(*-
/2 �(( � 5..1
"�) (%+1 ���� ��� / 7((-
/2 7.(&
8��9��%.+&&- ��� ��������� ��:�� � � �(-/ 0�./23
"���� ����,����� ��:�� #� *6(;%-�*
���:�� ���� (- ���� ���� ��� #� 6.;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ���� �(-/ 0�./23
���� (&-
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # ..--
8����!����� ������
)= ���� # %$$--
2������� ����� ��� )= ���� # *$--
����!����
�"# $% &-+ ��% !��� �� � ���@ ��� �������� �� -�6-
�"# $% &-& );����� �� � ���@ ��� ��� ���� %--�@66/ 0(%-/23
��� -�-
�����"��! ��.��(�!���
���������������
���$ ��
� ��� ���������� C��� �;����� �� � ���� !��� ������ ��������� ����@�*-/ � 5(*-/ 0�((/2 � 5..1/23
� C��� �� � ��� � ���� �� ������ ���
� E� � � � �� ���� �� �������� � �������� ��� ��� ��� �� ����� ����
�����������
� 2����� ������ ���� ��2B ���,���
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��� ��)���!���
�"# $% &%+ )�� ������� � ����� � > (�&
? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�% ��� ������ ������ � 8���� ���� �� �� ����� ��� � �� � ��� � ������ � ��� �� � ��; ��� �������� � � ��� � ������� � :����� ����� �� �� ��� ���� @ ������������ ����� �� ������� �� ��� �������� ���,���@ �� �����, �������@�� ����� � ���� �� ����� �
+��/���� � ���$�����C�� ����� �� �� ��� ������ ����@���,�� �� ��,��� 8���� ������� �� ��� �� ,�� ����� �� �;������������������������ ��� �������� � ��������� �� 7%$-/ 07*-(/23� 8��:��� ������� �� ���������� � ���� �� ���� � 8��������� ����� (6-/ 0$$./23@������� �� ������� �������� ��� �����,���
������ ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 2� *.$( 2������������� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -&�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%%. �-% � (6&6 J%666�(--( ��� ���� ��������� 8�� ���� �� ������
Product InformationHigh PerformanceLubricants
FEATURES• Maintain serviceable consistency
from -70 to 400°F (-57 to 204°C)• Practically nonvolatile• Odorless• Resistant to a wide range of
chemicals; generally resistant tomineral oils, vegetable oils, air,dilute acids, alkalines and mostaqueous solutions; Dow Corning111 Valve Lubricant & Sealant isquite resistant to a variety oforganic and inorganic chemicals
• Moisture resistant• Electrically insulating• Excellent rubber lubrication• Excellent release and sealing
properties• Resistant to oxidation• Essentially nontoxic and non-
melting• Show little tendency to dry out in
service
COMPOSITION• Greaselike materials containing
an inert amorphous silica filler incombination with selectedpolydimethyl silicone fluids
Dow Corning® 7 ReleaseCompound, Dow Corning® 4 ElectricalInsulating Compound and Dow Corning®
111 Valve Lubricant & Sealant
Dimethyl silicone compounds for a variety of lubrication andprotection applications
USESDow Corning ® 7 Release Compound can be used in applications including:• Mold release agent for foundry shell and core molds• Break-in treatment for bladders on tire presses• Rubber lubricant and preservative• Release agent for adhesives and glues• Airframe lubricant• Cable-pulling lubricant to draw rubber-covered cable through conduit• Release agent for plastic extruders and processing equipment• Release agent for plastic film packaging machines
Uses of Dow Corning® 4 Electrical Insulating Compound include:• Moisture-proof seal for aircraft, automotive and marine ignition systems
and spark plug connections• Waterproof electrical connections• Electrical assemblies and terminals• Seal and lubricant for cable connectors, battery terminals, rubber door
seals and rubber and plastic O-rings• Assembly lubricant for various metal-on-plastic and metal-on-rubber
combinations• Lubrication for control and pressure plug valves
Dow Corning® 111 Valve Lubricant & Sealant can be used in applications such as:• Sealant for vacuum and pressure systems• Sealant for outdoor equipment, including shipboard applications, subject
to washing and harsh environments; meters; electrical service entranceand underground connections
• Damping medium for dash pots in electrical and electronic equipment• Chemical barrier coating• Antistick and sealant for transformer gaskets and equipment enclosures,
which help prevent gaskets from sticking to metal and resist weatheringand water washout
• Lubricant for rubber and plasticO-rings (see Use Limitations)
• Sealant for gaskets and seals• Lubricant for water softener and faucet valves• Valve stem lubricant for potable water• Aircraft vacuum systems
1Follow solvent manufacturer’s recommended safehandling instructions and applicable federal, stateand local regulations.
DESCRIPTIONDimethyl silicone compounds comein three basic consistencies:
• Light – Dow Corning 7 ReleaseCompound
• Medium – Dow Corning 4Electrical Insulating Compound
• Heavy – Dow Corning 111 ValveLubricant & Sealant
LISTINGS/SPECIFICATIONSThese compounds are permittedfor food contact use under FDARegulation 21 CFR 175.300, cover-ing polymeric coatings applied ascontinuous film over a metal sub-strate. Additionally, these compoundsare listed under NSF Standard 51for use in food processing equip-ment and NSF Standard 61 for usein potable water applications.
Dow Corning 4 Electrical InsulatingCompound is designed to meet therequirements of SAE AS 8660.
HOW TO USEFor best results, clean and drysurfaces before application.
Dow Corning silicone compounds canbe applied by hand, by speciallydesigned automated equipment, orby brushing or wiping. When usingsome high pressure dispensingequipment, separation and compac-tion can occur. Certain designs ofgrease guns may seize with siliconecompounds; test prior to using.
Where a thinner consistency isneeded, the compound can bedispersed in a solvent and appliedby brushing or spraying.1
USE LIMITATIONSThese specific Dow Corningcompounds should not be applied:• To any surface that will be
painted or finished. Suchcoatings may not adhere to the
silicone-treated surfaces. Ifcontaminated by a siliconecoating, parts can be wiped orwashed with solvent or washedwith detergent.
• To O-rings or other componentsmade of silicone rubber becausethey can deteriorate the siliconerubber. These compounds willalso slightly swell natural butylrubbers. Any rubber should betested for excessive swell orshrink.
Because each application may varyin chemical composition, pressure,flow velocity, relubrication require-ments and equipment design, thesilicone compound should be testedbefore adopting for regular use.
These compounds are not intended foruse with liquid oxygen or other strongoxidizing chemicals and should not beused in applications requiring LOXcompatibility.
These products are neither tested norrepresented as suitable for medical orpharmaceutical uses.
SHIPPING LIMITATIONSNone.
STORAGE AND SHELF LIFEWhen stored at 77°F (25°C), theseDow Corning silicone compoundshave a shelf life of at least 60 monthsfrom date of manufacture. Refer toproduct packaging for “Use By” date.
PACKAGINGThese Dow Corning silicone com-pounds are supplied in 5.3-oz (150-g) tubes, 8-lb (3.6-kg) cans, 40-lb(18.1-kg) pails and 440-lb (199.6-kg)drums.
Dow Corning 111 Valve Lubricant &Sealant is also available in 14.1-fl oz(400-g) cartridges.
SAFE HANDLINGINFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESENTATIVE,OR DISTRIBUTOR, OR BY WRITINGTO DOW CORNING CUSTOMERSERVICES, OR BY CALLING(989) 496-6000.
LIMITED WARRANTYINFORMATION - PLEASEREAD CAREFULLYThe information contained herein isoffered in good faith and is believed tobe accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fullysatisfactory for the intended end use.Suggestions of use shall not be takenas inducements to infringe any patent.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment.
Your exclusive remedy for breach ofsuch warranty is limited to refund ofpurchase price or replacement of anyproduct shown to be other than aswarranted.
DOW CORNING SPECIFICALLYDISCLAIMS ANY OTHER EXPRESSOR IMPLIED WARRANTY OFFITNESS FOR A PARTICULARPURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMSLIABILITY FOR ANY INCIDENTALOR CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THEFUTURE.™
www.dowcorning.com
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
Method Test Unit ResultDow Corning Dow Corning
Dow Corning 4 Electrical 111 Valve7 Relase Insulating Lubricant &
Physical Compound Compound SealantCTM1 0176 Color White, White, White,
translucent translucent translucentCTM 0191 NLGI #1 #2 #3
Penetration, worked 60 270 240 205worked 100,000 322 279 217
CTM 0033A Bleed, 24 hr/392°F (200°C) percent 6.5 4.5 0.05CTM 0033A Evaporation, 24 hr/392°F (200°C) percent 0.8 1.4 1.1
Service Temperature Range °F (°C) -40 to 400 -70 to 400 -40 to 400(-40 to 204) (-57 to 204) (-40 to 204)
Melting Point None None NoneCTM 0022 Specific Gravity at 77°F (25°C) 1.0 1.0 1.0
FDA Recognition, 21 CFR 175.300 Yes Yes Yes
ElectricalCTM 0112 Dielectric Constant,
at 100 Hz 2.85 2.98 2.88at 100 kHz 2.83 3.01 2.95
CTM 0112 Dissipation Factor,at 100 Hz <0.0001 0.0001 0.0001at 100 kHz <0.0001 <0.0002 <0.0005
CTM 0114 Dielectric Strength, 50 mil gap volts/mil >450 >450 >450Volume Resistivity at 73°F (23°C) ohm-cm 2.8 x 1015 1.1 x 1015 2.17 x 1015
CTM 0171 Arc Resistance seconds 126 130 1241CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request.
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as abasis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning CustomerService in Midland, MI. Call (989) 496-6000.
Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 71-448k-01 FPH 29249 ©1996, 1999, 2002 Dow Corning Corporation. All rights reserved.
�������� =�������
�7�� �� � �������� *����� !7�! ��� 8� ���" �! !�()���!���� 7�*7��!7�� !7��� �. ���(�� �������� *������
������������� "���� ��� � � � ��� ������� @ ,�� ������ @ ���� �� �������� ���� @ ��� ����� �������� ��, @ ,�������� ����� ����,�� @ ���
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ����(�!�� $��! 1����
8�������� 4���,
4� � ��� �� �� �� � ($/ ��(� *%1
L"� = (((- ������� 0���,�� 1- ��� 3 ���%- (1- � *--
#�'" ��� (
������� ��������� ���� / �(- � (6-
�� �� ����* %�%
L"� = (((- ���� ��� / #��
9"� � &11- 4���� 0%$-/ �(. ���� 3 > .�-
9"� � &11- B�������� 0%$-/ �(. ���� 3 > %�-
L"� = (((- !��� �� ��� 0*&/ �% ����3 > -�$
8��9 � ($61 2��� ���� ���� ���� 0%$--����%����3 # %$--
9�;���� � ����� �������
+$@---
?L"�� L���� � "�� ���� �������8��9� 8������ ������ ��� �� �� �� 9������ �9"�� 9������ ����������� �� ������ �
+�, �� $�� ��� ��� �� ���������� 8 � � ������ ��������� ���� � @ ����� �� ������ ��� �� � ��� �@ �����@ ��������� ��������� �������
�� � � � � ����� ������ � �� �� � � ��� ������ ���� ���� ���� �
+��/���� � ���$�������� ������ ��� ������ �� ,� ����� � !��� ���� �:����� � ��� ��� ��� ������ �� �������" �� ��� �� ���� ��� ,� ����� @ ���������� �� � ������������ ���� �� ��, ������� ���� ����� ���� !� � ��� ��������� �����������
�����"��! ��.��(�!���
���������������
���$ ��
� ��� � ���@ ��� � ���� ��������� � �������� ������ ������� �������� �;����� �� � ���� !��� �� � �
�����������
� ������� ���� ���� ����,� ���� �� �������
$��0�� ��� ��/��� ���!�� ����@ ������ � � ����@ ���,����� �� ������@ �� � � ���� ���� ��*1 ��� ���� �� ��� �� ���������
������������ ������ � ��������� � %,� ��
8I�")#
%� ��� ������� � �� ������ ���������� ����� @ � ��������������� � 8� ��������� ��� �� ������ ���� � �� ������ ��������� �;����� � ������� ��������������� � ������ ���������@��������� @ �� ���� ������ � ��(� #� ������� ��� ���� �� ����������� �� ������ � �� ��������� ���� ���� �������� �� ������*� ��� ������ �� ��������� ������ ���� � �@ �� � � ����� ���� � � ������� �:�����@������������� ������ @ ���.� 4� ��� � ���� �� ������� ������� ��� 09���3 �� ������ �������� �� ������ ������ � ��$� ��� ��� ���� 8 ��@ ���@������ ���������� �� ��� ���� �� �������
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B .% '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -$�-+�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� &-�*-61�-% � ..(( J(--( ��� ���� ��������� 8�� ���� �� ������
SpecialtyLubricants Molykote ® 55 0 Ring Grease
FEATURES Silicone based lubricant for O-rings
APPLICATIONS � Dynamic lubrication between rubber and metal parts in pneumatic systems in aircraft,
automotive and general industrial applications.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard* Parameter Unit Result Appearance off-white Base oil viscosity at 25˚C mm²/s 100 JIS K 2220 Penetration (worked 60 times) mm/10 300 to 340 NLGI class 1 Service temperature range ˚C -65 to 175 Density g/cm³ 1.0 JIS K 2220 Drop point ˚C 220 Fed Std 791 Bleed (150˚C/24 hours) % 3.0 Fed Std 791 Evaporation (150˚C/24 hours) % 1.4 JIS K 2220 Oxidation resistance (99˚C/500 hours) MPa 0.01 JIS K 2220 Water washout (38˚C/1 hour) % 4.2 DIN 51 802 Emcor corrosion test 0 *JIS: Japanese Industrial Standard. Fed Std: Federal Standard DIN: Deutsches Industrie Norm.
HOW TO USE Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
Compatibility with plastics may vary depending on the type and grade of the plastic. Performs adequate compatibility testing in advance. This grease is not compatible with silicone rubber.
HANDLING PRECAUTIONSThis product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
USABLE LIFE AND STORAGE When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
� High oxidation resistance
� Wide service temperature range (-65ºC to 175ºC)
� Compatable with most plastics
� Good corrosion protection
COMPOSITION� Silicone oil
� Ester
� Lithium soap
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 10/3/2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3093A-01 �2006 Dow Corning Corporation. All rights reserved.
PACKAGINGThis product is available in 5kg cans.
CAUTION
1. Data included in this document are average values, not specification values. Any applications for this product given in this document are merely examples. Perform thorough evaluations to confirm functionality, effectiveness, and safety before use. 2. No guarantees are made that the applications described in this document are free from infringements of any patent. 3. This product was developed for industrial use, and is not intended for use in medical equipment, pharmaceutical products, etc. 4. Be sure to read the material safety data sheet (MSDS) and container label for this product before use. 5. Contact Dow Corning Asia, Ltd., before reproducing any data from this document.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product InformationSpecialty
Lubricants
FEATURES• Colorless• Nonstaining
COMPOSITION• Waxlike, extreme-pressure lubricant• Supplied as liquid or aerosol;
remains as wax film after solventevaporation
Dow Corning® 557Silicone Dry Film Lubricant
Extreme-pressure, dry film lubricant provides exceptionalrelease and lubricating properties
APPLICATIONSDow Corning® 557 Silicone Dry Film Lubricant can be used:• In steel production where it can increase slitter-blade life, resulting in clean,
square edges• In aluminum production where it can lengthen the life of tools and dies,
improve surface finish, lubricate sliding surfaces and surfaces during extruding,deep drawing or spinning
• In machine shops where it can improve surface finishes; extend the life ofcutting tools, taps, dies, drills, slitters, and forming tools; reduce wear andreduce stick-slip or metal seizure on bearings, slides, cams adjusting screws,guides and ways
• For textile, paper and woodworking industries where it can reduce wear andfriction and reduce product staining from spinning frames, knives, scissors,punches, chain, conveyors or material-handling equipment
• For rubber and plastic industries where it can reduce sticking, pickup or productcontamination from handling equipment, knives, conveyors or sliding surfaces
TYPICAL PROPERTIESSpecification Writers: Please contact your local Dow Corning sales office or your GlobalDow Corning Connection before writing specifications on this product.
Method Test Unit ResultAs Supplied
Color ClearCTM1 0137A Specific Gravity 0.77
Flash Point2 °C (°F) 39 (102)Service Temperature Range3 °C (°F) -40 to 43 (-40 to 110)Drying Time minutes 30Solvent, bulk Naphtha
As AppliedAppearance Clear wax filmMelting Range °C (°F) 32-46 (90-115)Press Fit4 No stick-slip
ASTM D 2596 Four Ball Weld Load N 1200Fed Std 791a5 Four Ball Wear Scar mm 0.85
Coefficient of Friction4 0.071Corporate Test Methods (CTMs) correspond to standard ASTM tests in most instances. Copies of CTMs are availableupon request.2Bulk form only.3Estimated service temperature range based on product formulation and laboratory testing. Actual service temperaturerange is dependent on other factors including the specific application environment.4Tested on a Falex LFW-4 Press Fit tester, steel vs. steel, Rc60, 0.6-inch per minute, 12,000 psi in air, roomtemperature.5Method 6514.1.
DESCRIPTIONDow Corning 557 Silicone Dry FilmLubricant is:• An extreme-pressure lubricant with
exceptional release properties forcutting and forming metals, andwith lubricating properties forheavily loaded tracks, cams, slides,etc.
• Colorless in thin films• Nonstaining to paper or fabrics
The solvent evaporates after applica-tion, leaving a nearly transparent, thinfilm. This lubricant film begins to meltat 32°C (90°F) and adheres tenaciouslyto most surfaces, whether in a solid orfluid state.
LISTINGS/SPECIFICATIONSDow Corning 557 Silicone Dry FilmLubricant is authorized for use inofficial establishments operating underthe Federal Meat And Poultry Inspec-tion Program (formerly USDA H2ratings) where there is no possibilityof food contact.
HOW TO USEApplicationDow Corning 557 Silicone Dry FilmLubricant may be sprayed from anaerosol can or an automatic lubricator,applied by brushing or dipping. Only avery thin film is needed for maximumresults. The film is useful immediatelyafter the solvent evaporates.
Avoid freezing. If bulk Dow Corning557 Silicone Dry Film Lubricantseparates due to freezing, heat thesolution to 32°C (90°F) and stir theproduct until the wax dissolves backinto solution. It should remain stableuntil frozen again or until excessivesolvent evaporation occurs.
Avoid unnecessary solvent loss, wherepossible, by closing open applicationsystems. When dipping, use thesmallest dip container appropriateto the volume of parts being coated.Keep containers closed unless dippingor removing product. Do not leavedip drums or tanks open overnightor between shifts.
In most dip operations, excessivesolvent loss is unavoidable and thesolvent must be replenished. Addingnaphtha alone will not suffice. Thesolvent component consists of 94 per-cent naphtha (41°C [105°F] flashpoint) mixed with methyl amylalcohol. This premix should be addedto the depleted product that has beenheated to 32°C (90°F) and stirred untilall wax solids have gone back intosolution. Methyl amyl alcohol can beadded up to 8 percent, but not lessthan 6 percent of the solvent mixture.
The amount of premix solvent to beadded can be determined throughexperience or by conducting a percentsolids test by weighing a well-mixed3-g (0.1-oz) sample, heating to 105°C(221°F) for 20 minutes and weighingthe remaining wax at room tempera-ture. When adding solvent, strive forno more than 8 percent wax solidsunless a thicker film is desired thanprovided by the standard formulation.
This rejuvenation process should workthree to four times after which the usedmaterial should be replaced with freshproduct.
Removal of FilmDow Corning 557 Silicone Dry FilmLubricant may be removed by mostsolvents or by vapor degreasing.
HANDLING PRECAUTIONSPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED IN THIS DOCUMENT.BEFORE HANDLING, READPRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESEN-TATIVE, OR DISTRIBUTOR, ORBY CALLING YOUR GLOBALDOW CORNING CONNECTION.
USABLE LIFE ANDSTORAGEWhen stored at or below 25°C (77°F),Dow Corning 557 Silicone Dry FilmLubricant has a shelf life of 60 monthsfrom date of manufacture. Refer to
product packaging for “Use By” date.When stored at or below 4°C (40°F),solid material may precipitate. Whenthe material is warmed to room tem-perature, this material will readily re-dissolve without affecting lubricationproperties.
PACKAGINGDow Corning 557 Silicone Dry FilmLubricant is supplied in aerosol canscontaining 312 g (11 oz), in 15.1-kg(5-gal) pails and in 166.4-kg (55-gal)drums. All weights, net.
LIMITATIONSThis product is neither tested norrepresented as suitable for medical orpharmaceutical uses.
SHIPPING LIMITATIONSDow Corning 557 Silicone Dry FilmLubricant is a combustible material.
Dow Corning 557 Silicone Dry FilmLubricant Spray has the DOT Classi-fication: Compressed gas NOS –flammable gas.
WARRANTYINFORMATIONThe information contained herein isoffered in good faith and is believedto be accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fully satisfactoryfor the intended end use.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment. Your exclusive remedyfor breach of such warranty is limitedto refund of purchase price or replace-ment of any product shown to be otherthan as warranted. Dow Corning speci-fically disclaims any other express orimplied warranty of fitness for a par-ticular purpose or merchantability.Unless Dow Corning provides youwith a specific, duly signed endorse-ment of fitness for use, Dow Corningdisclaims liability for any incidental orconsequential damages. Suggestions ofuse shall not be taken as inducementsto infringe any patent.
Printed in USA Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 10-808A-01 AGP4934 ©1993, 1998, 2000 Dow Corning Corporation. All rights reserved.
Product InformationHigh PerformanceLubricants
FEATURES• Maintain serviceable consistency
from -70 to 400°F (-57 to 204°C)• Practically nonvolatile• Odorless• Resistant to a wide range of
chemicals; generally resistant tomineral oils, vegetable oils, air,dilute acids, alkalines and mostaqueous solutions; Dow Corning111 Valve Lubricant & Sealant isquite resistant to a variety oforganic and inorganic chemicals
• Moisture resistant• Electrically insulating• Excellent rubber lubrication• Excellent release and sealing
properties• Resistant to oxidation• Essentially nontoxic and non-
melting• Show little tendency to dry out in
service
COMPOSITION• Greaselike materials containing
an inert amorphous silica filler incombination with selectedpolydimethyl silicone fluids
Dow Corning® 7 ReleaseCompound, Dow Corning® 4 ElectricalInsulating Compound and Dow Corning®
111 Valve Lubricant & Sealant
Dimethyl silicone compounds for a variety of lubrication andprotection applications
USESDow Corning ® 7 Release Compound can be used in applications including:• Mold release agent for foundry shell and core molds• Break-in treatment for bladders on tire presses• Rubber lubricant and preservative• Release agent for adhesives and glues• Airframe lubricant• Cable-pulling lubricant to draw rubber-covered cable through conduit• Release agent for plastic extruders and processing equipment• Release agent for plastic film packaging machines
Uses of Dow Corning® 4 Electrical Insulating Compound include:• Moisture-proof seal for aircraft, automotive and marine ignition systems
and spark plug connections• Waterproof electrical connections• Electrical assemblies and terminals• Seal and lubricant for cable connectors, battery terminals, rubber door
seals and rubber and plastic O-rings• Assembly lubricant for various metal-on-plastic and metal-on-rubber
combinations• Lubrication for control and pressure plug valves
Dow Corning® 111 Valve Lubricant & Sealant can be used in applications such as:• Sealant for vacuum and pressure systems• Sealant for outdoor equipment, including shipboard applications, subject
to washing and harsh environments; meters; electrical service entranceand underground connections
• Damping medium for dash pots in electrical and electronic equipment• Chemical barrier coating• Antistick and sealant for transformer gaskets and equipment enclosures,
which help prevent gaskets from sticking to metal and resist weatheringand water washout
• Lubricant for rubber and plasticO-rings (see Use Limitations)
• Sealant for gaskets and seals• Lubricant for water softener and faucet valves• Valve stem lubricant for potable water• Aircraft vacuum systems
1Follow solvent manufacturer’s recommended safehandling instructions and applicable federal, stateand local regulations.
DESCRIPTIONDimethyl silicone compounds comein three basic consistencies:
• Light – Dow Corning 7 ReleaseCompound
• Medium – Dow Corning 4Electrical Insulating Compound
• Heavy – Dow Corning 111 ValveLubricant & Sealant
LISTINGS/SPECIFICATIONSThese compounds are permittedfor food contact use under FDARegulation 21 CFR 175.300, cover-ing polymeric coatings applied ascontinuous film over a metal sub-strate. Additionally, these compoundsare listed under NSF Standard 51for use in food processing equip-ment and NSF Standard 61 for usein potable water applications.
Dow Corning 4 Electrical InsulatingCompound is designed to meet therequirements of SAE AS 8660.
HOW TO USEFor best results, clean and drysurfaces before application.
Dow Corning silicone compounds canbe applied by hand, by speciallydesigned automated equipment, orby brushing or wiping. When usingsome high pressure dispensingequipment, separation and compac-tion can occur. Certain designs ofgrease guns may seize with siliconecompounds; test prior to using.
Where a thinner consistency isneeded, the compound can bedispersed in a solvent and appliedby brushing or spraying.1
USE LIMITATIONSThese specific Dow Corningcompounds should not be applied:• To any surface that will be
painted or finished. Suchcoatings may not adhere to the
silicone-treated surfaces. Ifcontaminated by a siliconecoating, parts can be wiped orwashed with solvent or washedwith detergent.
• To O-rings or other componentsmade of silicone rubber becausethey can deteriorate the siliconerubber. These compounds willalso slightly swell natural butylrubbers. Any rubber should betested for excessive swell orshrink.
Because each application may varyin chemical composition, pressure,flow velocity, relubrication require-ments and equipment design, thesilicone compound should be testedbefore adopting for regular use.
These compounds are not intended foruse with liquid oxygen or other strongoxidizing chemicals and should not beused in applications requiring LOXcompatibility.
These products are neither tested norrepresented as suitable for medical orpharmaceutical uses.
SHIPPING LIMITATIONSNone.
STORAGE AND SHELF LIFEWhen stored at 77°F (25°C), theseDow Corning silicone compoundshave a shelf life of at least 60 monthsfrom date of manufacture. Refer toproduct packaging for “Use By” date.
PACKAGINGThese Dow Corning silicone com-pounds are supplied in 5.3-oz (150-g) tubes, 8-lb (3.6-kg) cans, 40-lb(18.1-kg) pails and 440-lb (199.6-kg)drums.
Dow Corning 111 Valve Lubricant &Sealant is also available in 14.1-fl oz(400-g) cartridges.
SAFE HANDLINGINFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESENTATIVE,OR DISTRIBUTOR, OR BY WRITINGTO DOW CORNING CUSTOMERSERVICES, OR BY CALLING(989) 496-6000.
LIMITED WARRANTYINFORMATION - PLEASEREAD CAREFULLYThe information contained herein isoffered in good faith and is believed tobe accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fullysatisfactory for the intended end use.Suggestions of use shall not be takenas inducements to infringe any patent.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment.
Your exclusive remedy for breach ofsuch warranty is limited to refund ofpurchase price or replacement of anyproduct shown to be other than aswarranted.
DOW CORNING SPECIFICALLYDISCLAIMS ANY OTHER EXPRESSOR IMPLIED WARRANTY OFFITNESS FOR A PARTICULARPURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMSLIABILITY FOR ANY INCIDENTALOR CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THEFUTURE.™
www.dowcorning.com
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
Method Test Unit ResultDow Corning Dow Corning
Dow Corning 4 Electrical 111 Valve7 Relase Insulating Lubricant &
Physical Compound Compound SealantCTM1 0176 Color White, White, White,
translucent translucent translucentCTM 0191 NLGI #1 #2 #3
Penetration, worked 60 270 240 205worked 100,000 322 279 217
CTM 0033A Bleed, 24 hr/392°F (200°C) percent 6.5 4.5 0.05CTM 0033A Evaporation, 24 hr/392°F (200°C) percent 0.8 1.4 1.1
Service Temperature Range °F (°C) -40 to 400 -70 to 400 -40 to 400(-40 to 204) (-57 to 204) (-40 to 204)
Melting Point None None NoneCTM 0022 Specific Gravity at 77°F (25°C) 1.0 1.0 1.0
FDA Recognition, 21 CFR 175.300 Yes Yes Yes
ElectricalCTM 0112 Dielectric Constant,
at 100 Hz 2.85 2.98 2.88at 100 kHz 2.83 3.01 2.95
CTM 0112 Dissipation Factor,at 100 Hz <0.0001 0.0001 0.0001at 100 kHz <0.0001 <0.0002 <0.0005
CTM 0114 Dielectric Strength, 50 mil gap volts/mil >450 >450 >450Volume Resistivity at 73°F (23°C) ohm-cm 2.8 x 1015 1.1 x 1015 2.17 x 1015
CTM 0171 Arc Resistance seconds 126 130 1241CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request.
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as abasis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning CustomerService in Midland, MI. Call (989) 496-6000.
Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 71-448k-01 FPH 29249 ©1996, 1999, 2002 Dow Corning Corporation. All rights reserved.
MOLYKOTE® 7400Anti-friction Coating
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• Sliding coating of metal/metal combinations with slow to moderately fast movements and high loads.
• Suitable for improving the running-in of gearboxes, sliding bearings and sliding guides.
• Maintenance-free, permanent lubrication of highly stressed friction combinations with low speeds or oscillating operation, in which the use of oil or grease, for design construction reasons is not possible, or because of the unacceptable risk of soiling.
• For running-in car transmission shafts, for the maintenance-free, permanent, non-soiling lubrication of threaded sleeves of car seat adjusting mechanisms, and for the cold working of steel.
Color Dark grey
Physical propertiesViscosity at 20°C (DIN4 cup) 24sDIN 53211/4Density at 20°C 1.16g/mlDIN 53217/2Nonvolatile content 30%CTM 0242 IpH at 20°C 8CTM 0007 AStorage life 12months
TemperatureDrying time at 20°C 15minutesCuring time 40/23min/°CCuring time 10/50min/°CCuring time 5/90min/°CService temperature range -70 to +200°C
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ p=11300
s=7900NASTM-D2625
LFW-1, rotating¹ p=343ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutesno. of revolutions x1000 to μ=0.1LFW-1, oscillating p=76F=900N, frequency=89.5osc./minutesno. of oscillations to μ=0.08
FEATURES
Free from flammable solvents•
Water-based, environmentally friendly
•
High load-carrying capacity•
Low coefficient of friction•
COMPOSITION
Solid lubricants•
Inhibitor•
Organic binder•
Water•
Stabilisers•
TYPICAL PROPERTIES (continued)
TestStandard* Unit Result
Fretting corrosion - Deyber tester 10x10¦
1. Surface pretreatment: p=phosphated, s=sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE 7400 Anti-Friction Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm.
Curing
40 minutes at 23°C,10 minutes at 50°C,5 minutes at 90°C (Object temperature).
Solubility
Thinning can be carried out using distilled water or tap water.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored between -10°C and 40°C in the original unopened containers, this product has a usable life of 12 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically
disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
16/11/1998
DC 2912Ref. no. 71-0073B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® 7400Anti-friction Coating
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• Sliding coating of metal/metal combinations with slow to moderately fast movements and high loads.
• Suitable for improving the running-in of gearboxes, sliding bearings and sliding guides.
• Maintenance-free, permanent lubrication of highly stressed friction combinations with low speeds or oscillating operation, in which the use of oil or grease, for design construction reasons is not possible, or because of the unacceptable risk of soiling.
• For running-in car transmission shafts, for the maintenance-free, permanent, non-soiling lubrication of threaded sleeves of car seat adjusting mechanisms, and for the cold working of steel.
Color Dark grey
Physical propertiesViscosity at 20°C (DIN4 cup) 24sDIN 53211/4Density at 20°C 1.16g/mlDIN 53217/2Nonvolatile content 30%CTM 0242 IpH at 20°C 8CTM 0007 AStorage life 12months
TemperatureDrying time at 20°C 15minutesCuring time 40/23min/°CCuring time 10/50min/°CCuring time 5/90min/°CService temperature range -70 to +200°C
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ p=11300
s=7900NASTM-D2625
LFW-1, rotating¹ p=343ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutesno. of revolutions x1000 to μ=0.1LFW-1, oscillating p=76F=900N, frequency=89.5osc./minutesno. of oscillations to μ=0.08
FEATURES
Free from flammable solvents•
Water-based, environmentally friendly
•
High load-carrying capacity•
Low coefficient of friction•
COMPOSITION
Solid lubricants•
Inhibitor•
Organic binder•
Water•
Stabilisers•
TYPICAL PROPERTIES (continued)
TestStandard* Unit Result
Fretting corrosion - Deyber tester 10x10¦
1. Surface pretreatment: p=phosphated, s=sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE 7400 Anti-Friction Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm.
Curing
40 minutes at 23°C,10 minutes at 50°C,5 minutes at 90°C (Object temperature).
Solubility
Thinning can be carried out using distilled water or tap water.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored between -10°C and 40°C in the original unopened containers, this product has a usable life of 12 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically
disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
16/11/1998
DC 2912Ref. no. 71-0073B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® 7405Anti-Friction Coating
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Heat-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• For metal/metal and metal/plastic combinations with slow to moderately fast movements to high loads.
• Suitable for car door locks, small parts of cameras, cylinder head bolts and self-tapping screws.
Color Yellowish, transparent
Physical propertiesDensity at 20°C 1.04g/mlDIN 53217/2Storage life years
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ b=8000NASTM-D2625LFW-1, rotating¹ p=63ASTM-D2714F=680 N, n=72 minª¹, v=7.9 m/minutesno. of revolutions x1000 to μ=0.08LFW-1, oscillating¹ p=4ASTM-D2714F=900N, frequency=89.5osc./minutesno. of oscillations x1000 to μ=0.08Fretting corrosion - Deyber tester 36x10¦
Coefficient of frictionScrew test: Erichsen, thread 0.13μScrew test: Erichsen, head 0.09μ
1. Surface pretreatment: b=blank, p=phosphated* ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
FEATURES
Good corrosion protection•
Resistant to adhesion and abrasion•
Low coefficient of friction•
Resistant to oil, grease and solvents•
Avoidance of stick-slip•
Electrically insulating•
COMPOSITION
Solid lubricants•
Organic binder•
Solvent•
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE 7405 Anti-Friction Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-Friction Coating thoroughly before applying by spraying, dipping, centrifuging, brushing or printing. Recommended dry film thickness: 5 to 20μm.
Curing
60 minutes at 120ºC (object temperature).
Solubility
Thinning can be carried out using MOLYKOTE®7414 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 23°C in the original unopened containers MOLYKOTE 7405 Anti-friction Coating has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1998-2001 Dow Corning Corporation. All rights reserved.
07/12/1998
DC 2913Ref. no. 71-0104A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® 7409Anti-friction Coating
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Heat-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• Sliding coating of metal/metal combinations with slow to moderately fast movements and moderate to high loads.
• Suitable for highly stressed sliding areas with low sliding speeds, oscillating movements or intermittent operations. For improving the running-in process, for permanent lubrication at high temperatures and also where oils and greases cannot be used.
• Used successfully for piston rings and tappets of combustion engines, magnetic armatures of vehicle starter motors, parts of vehicle brakes, locks, hinges and pumps.
• Corrosion protector for hydraulic and pneumatic parts.
Color Greyish black
Physical propertiesDensity at 20°C 1.10g/mlDIN 53217/2Nonvolatile content 31%CTM 0242 IStorage life 5years
TemperatureCuring time 30/220min/°CCuring time 120/150min/°CService temperature range -70 to 380°C
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ s=14700NASTM-D2625LFW-1, rotating¹ p=364ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutesno. of revolutions x1000 to μ=0.1LFW-1, oscillating¹ p=214ASTM-D2714F=900N, frequency=89.5osc./minutesno. of oscillations to μ=0.08
ResistanceRadiation resistance 10{rad
1. Surface pretreatment: p=phosphated, s=sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
FEATURES
Outstanding lubricating, coupled with corrosion protection properties
•
Resistant to oil, grease, solvents and many other chemicals
•
Avoidance of fretting corrosion•
SPECIFICATIONSComplies with TL 8010-026/1 BWB...-MBB...
•
COMPOSITION
Solid lubricants•
Organic binder•
Solvent•
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE 7409 Anti-Friction Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm.
Curing
120 minutes at 150°C30 minutes at 220°C(Object temperature).
Solubility
Thinning can be carried out using MOLYKOTE®7414 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers MOLYKOTE 7409 Anti-friction Coating has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
16/11/1998
DC 2914Ref. no. 71-0074B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® 7414Thinner
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Solvent-based thinner
Standard* Unit Result
APPLICATION
• Diluting and cleaning solvent for specific solvent-based MOLYKOTE® Anti-Friction Coatings. Especially for products like 7405, 7409, 7620 and D 10.
Color Transparent
Physical propertiesDensity at 25°C 1.03g/mlDIM 53217/2Flash point 91°CDIN 51758Storage life 2years
* DIN: Deutsche Industrie Norm
FEATURES
Transparent•
COMPOSITION
Organic solvent•
HOW TO USE
Dilute the Anti-Friction Coating up to 20% with MOLYKOTE 7414 Thinner. Stir thoroughly before applying the diluted product.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 23°C in the original unopened containers, MOLYKOTE 7414 Thinner has a
usable life of 24 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1998-2001 Dow Corning Corporation. All rights reserved.
07/12/1998
DC 4089Ref. no. 71-0320-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
Product InformationHigh PerformanceLubricants
FEATURES• Handles wide temperature range,
high speeds and heavy loads• Very good low temperature torque
COMPOSITION• Polyolester grease with lithium
complex thickener• NLGI #2 Grease
DESCRIPTIONMolykote® BG 20 High Perform-ance Synthetic Grease is a syntheticcomplex grease with outstandingproperties including a wide temper-ature range estimated at -45 to 182°C(-50 to 360°F) and a high load-carrying
capacity. It combines the most impor-tant properties of silicone grease (widetemperature range) and solid lubricant-containing organic greases (high load-carrying capacity) in an ester-basedgrease.
Molykote® BG 20 HighPerformance Synthetic Grease
Synthetic grease handles high speed, high load, hightemperature combinations
APPLICATIONS• Advantageous in applications that experience high temperatures and extreme
pressure or high speed, such as ball bearings of electrical motors, fans, calenders,presses, metal working machines, generators, utility switch contacts, spindles,dryers or other applications
TYPICAL PROPERTIESSpecification Writers: Please contact your local Dow Corning sales office or your GlobalDow Corning Connection before writing specifications on this product.
Method Test Unit ResultColor BeigeOil Base EsterBase Oil Viscosity, at 38°C (100°F) SUS 200Thickener Lithium complexSpecific Gravity 1.01
ASTM D 217 Penetration, worked 60 mm/10 270Service Temperature Range, estimated °C (°F) -45 to 182 (-50 to 360)
ASTM D 566 Dropping Point °C (°F) >300 (>572)ASTM D 1264 Water Washout percent 2Fed Std 791C Oil Separation,
24 hr at 150°C (302°F) percent 2.2ASTM D 2596 Four-Ball Test, Weld Load kg 265ASTM D 2266 Four-Ball Test, Wear Scar, 1 hour at
75°C (167°F), 400 N mm 0.87Dn Value (shaft size of bearing in
mm x rpm), estimated 550,000Almen-Wieland Machine OK Load N 20,000
ASTM D 1478 Low Temperature Torque Test-20°C (-4°F) N•m 207 x 10-3
-50°C (-58°F) N•m 530 x 10-3
ASTM D 1478 Low Temperature Torque Test, after 20 minute run-20°C (-4°F) N•m 130 x 10-3
-50°C (-58°F) N•m 130 x 10-3
FAG Bearing Test, angular contact thrust ball bearings160°C (320°F), 1500 N, 6000 rpm hours 662
DIN 51802 Corrosion Protection, SKF Emcor rating 1-21Dn values are calculated approximations and will vary widely with temperature, load and bearing type.
Printed in USA Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 25-379e-01 AGP4934 ©1992, 1998, 2000 Dow Corning Corporation. All rights reserved.
HOW TO USEApply Molykote BG 20 HighPerformance Synthetic Grease like anyother grease. Follow instructions ofbearing manufacturers. For optimumperformance, Molykote BG 20High Performance Synthetic Greaseshould not be mixed with other greases.
HANDLING PRECAUTIONSPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED IN THIS DOCUMENT.BEFORE HANDLING, READPRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESEN-TATIVE, OR DISTRIBUTOR, ORBY CALLING YOUR GLOBALDOW CORNING CONNECTION.
USABLE LIFE ANDSTORAGEMolykote BG 20 High PerformanceSynthetic Grease has a shelf life of60 months from date of manufacture.Refer to product packaging for “UseBy” date.
PACKAGINGMolykote BG 20 High PerformanceSynthetic Grease is supplied in tubes, cartridges, and pails.
LIMITATIONSThis product is neither tested nor reresented as suitable for medical or phrmaceutical uses.
SHIPPING LIMITATIONSNone.
WARRANTYINFORMATIONThe information contained herein isoffered in good faith and is believed
to be accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fully satisfactoryfor the intended end use.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment. Your exclusive remedyfor breach of such warranty is limitedto refund of purchase price or replace-ment of any product shown to be otherthan as warranted. Dow Corning speci-fically disclaims any other express orimplied warranty of fitness for a par-ticular purpose or merchantability.Unless Dow Corning provides youwith a specific, duly signed endorse-ment of fitness for use, Dow Corningdisclaims liability for any incidental orconsequential damages. Suggestions ofuse shall not be taken as inducementsto infringe any patent.
�������� 0 ����������
���(��( ��!7��( ���) *����� �����"��* ����" ��8�����!� -�!7�>������! ��8����!��* ��)�8���!��� .�� (�!������(�!�� .���!�����"�� 7��'% ���"� �! ���- !� .��! �)��"�
������������� "������ ���� ��� ������ ������ @ ���� ������ @ ����� @ ������ ����� @ ���� K�� @ ���� @ ���� ���� ���� ���� @ �� � � �������� ��� � ���� ��
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ����(�!�� $��! 1����
8�������� 4���,
L"� = (((- ������� 0���,�� 1- ��� 3 ���%- (1$ � (6$
#�'" ��� (
L"� = (((- ���� ��� / %&$
������� ��������� ����% / �*- � %*-
L"� = (((- 4���� 0%--/ (. ���� 3 > (�-
L"� = (((- B�������� 066/ (( ���� 3 > -�(
L"� = (((- );����� �� � ��� 066/ %-- ���� 3 9�� -�-*
L"� = (((- !��� �� ��� 0*&/ �% ����3 > %�-
����� ���� ���� � )= ���� # *%$-
!��� ��� 0% ����@ &--#3 �� %�(
�"# $%&(%�-(�8 28' ������ � @ ��� 2B6
01---���@ %*-/ @ .$--#3 ���� .-
�# ����� ����� .$-@---
���� �� �� � ��� �
8��9 �%+.* C������ ����� �� % 0#��3
�=2 B���� � - 0#��3
%� I� � %$-/ ��� ��� ������ �� ����?L"�� L���� � "�� ���� �������8��9� 8������ ������ ��� �� �� �� 9������ ��"#���� ��� "�� ��� #����
�����"��! ��.��(�!���
���������������
���$ ��
� �������� ���� ������� ���������� B;���� ��� �� ���� ��������������
� '��� �;����� �� � ���� � ������� ��������� ���� ������ ����� � � �������� � ����� ��� ����
� E����� ����� �������� ���� �� � ���� �������� ����� �� �� � ���� ����� ����� ����� ��
�����������
� 9����� ���� ������ ���� ����� ������� � B� ������� � ���� �� �������
+�, �� $�� ��� ��� �� ����� 8 � � ������ ��������� ���� � @ ����� �� ������ ��� �� � ��� �@ �����@ ��������� ��������� �������
� �� � �� � �� � � ������F����������� � ���
+��/���� � ���$�������� ������ ��� ������ �� ,� ����� � !��� ���� �:����� � ��� ��� ��� ������ �� �������" �� ��� �� ���� ��� ,� ����� @ ���������� �� � ������������ ���� �� ��, ������� ���� ����� ���� !� � ��� ��������� �����������
$��0�� ��� ��/��� ���!�� ����@ ������ � � ����@ ���,����� �� ������@ �� � � ���� ���� ��60 ��� ���� �� ��� �� ���������
������������ ������ � ��������� � %,� �� 0%- �� ��� �3 �� %1,� ���� �
8I�")#
%� ��� ������� � �� ������ ���������� ����� @ � ��������������� � 8� ��������� ��� �� ������ ���� � �� ������ ��������� �;����� � ������� ��������������� � ������ ���������@��������� @ �� ���� ������ � ��(� #� ������� ��� ���� �� ����������� �� ������ � �� ��������� ���� ���� �������� �� ������*� ��� ������ �� ��������� ������ ���� � �@ �� � � ����� ���� � � ������� �:�����@������������� ������ @ ���.� 4� ��� � ���� �� ������� ������� ��� 09���3 �� ������ �������� �� ������ ������ � ��$� ��� ��� ���� 8 ��@ ���@������ ���������� �� ��� ���� �� �������
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 4E( ��� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -$�-+�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� &-�*%-.�-% � ..(- J(--( ��� ���� ��������� 8�� ���� �� ������
Product Information
Specialty
Lubricants MOLYKOTE® CO220
Oil
Chain oil
APPLICATION ��Suitable for lubrication of chains.
��Wide service temperature range
TYPICAL PROPERTIES Specification writers: These values are not intended for use in preparing specifications. Please contact your local DowCorning sales representative prior to writing specifications on this product.
Standard* Test Unit Result
Color Brownish,
transparent
Density, viscosity
DIN 51 757 Density at 20°C g/ml 0.94
DIN 51 562 Viscosity at 40°C mm²/s 220
Temperature
Service temperature ºC -10 to +250
ºF +14 to +482
Load-carrying capacity, wear protection
Four-ball tester (VKA)
DIN 51 350 pt.4 Weld load N 1800
DIN 51 350 pt.5 Wear scar under 800N load mm 0.8
Almen-Wieland machine
OK load N 18000
* DIN: Deutsche Industrie Norm
HOW TO USE
How to apply Apply with brush, oil, spray~can,
spray gun, drop~feed oiler or
conventional metering devices.
MOLYKOTE CO220 Oil can also be
applied by dipping.
HANDLING PRECAUTIONS PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOWCORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest DowCorning sales office or DowCorning distributor.
LIMITATIONS This product is neither tested nor represented as suitable for medical or
pharmaceutical uses.
FEATURES
Low evaporation •
Contains no solvents •
COMPOSITION
Synthetic oil •
Antioxidant •
EP additives •
HEALTH AND
ENVIRONMENTAL
INFORMATION To support customers in their product safety needs, DowCorning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local DowCorning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that DowCorning's products are safe, effective, and fully satisfactory for the intended end use. DowCorning's sole warranty is that the product will meet the DowCorning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DowCorning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless DowCorning provides you with a specific, duly signed endorsement of fitness for use, DowCorning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
2 30/11/1998 ® MOLYKOTE is a registered trademark of DowCorning Corporation.
Ref. no. 71-0153B-01 DC 3006 ©1997-2001 DowCorning Corporation. All rights reserved.
P R O D U C T I N F O R M A T I O N
Information AboutMolykote® D 10 Anti-Friction Coating
TypeDispersion of solid lubricants insolvent-based resin binder
Physical Form Viscous liquid
Special Properties Long-term wear resistance
Primary UsesFilm lubricant for applicationsthat require help to reduce pistonand cylinder wall wear duringbreak-in, cold-start, and ongoingoperation situations
DESCRIPTIONMolykote® D 10 Anti-Friction Coating is a specially formulated dispersion ofsolid lubricants in a solvent-based resinbinder. It is supplied as a thick liquidsuitable for screen-print applicationprocesses.
Once properly cured, it offers wearresistance with high load-carryingcapacity, as well as long-term resistanceto gasoline, motor oils, and solvents. It also offers excellent corrosion pro-tection. The coating is serviceable atoperating temperatures from -70° to380°C (-94° to 716°F).
TYPICAL APPLICATIONSMolykote D 10 Anti-Friction Coating is ideal as a long-term lubricating filmon pistons used in gasoline and dieselengines, compressors and pistonpumps, pneumatic and hydraulicsystems, and other applications thatrequire help to reduce piston andcylinder wall wear during break-in,cold-start, and ongoing operationsituations.
LIMITATIONSNot intended for medical use.
HOW TO USESubstrate PreparationThe surface to be coated must becompletely clean and free of greaseand oil.
How To ApplyMolykote D 10 Anti-Friction Coating is specially formulated and supplied for use in screen-print manufacturingprocesses. For optimum performance,the surface should be coated as evenlyas possible. A cured film thickness of 18 to 20 microns is recommended.It also can be applied by spray, dip,brush, tampon-print, and otherprocesses. Depending on the applica-tion process, further dilution using a solvent such as N-methylpyrrolidonemay be required. Please refer to thesolvent manufacturer’s safe handlinginformation prior to use. Stir wellbefore and during use.
CureSuggested cure times are 30 minutes at 180°C (356°F) or 60 to 120 minutesat 150°C (302°F). NOTE: Actualcuring times vary with substrate size,mass, and material; coating thickness;type of curing oven; and other factors.To assure proper cure and adhesion of the coating, specific tests can beperformed.
Contact your Dow Corning repre-sentative for further details on processapplication guidelines.
SHIPPING LIMITATIONSNone.
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
As SuppliedASTM D 1200 Viscosity, 25°C (77°F), cps ......................................................... 27,500ASTM D 1298 Density, 20°C (68°F), g/cm3 ........................................................... 1.3ASTM 3941 Flash Point, °C (°F) ................................................................ 63 (145)
As CuredASTM B 117 Corrosion Resistance, hours ......................................................... >300ASTM D 2625 Falex Pressure Resistance,
phosphate pretreatment, N (lb) ............................... 10,800 (2430)ASTM D 2714 LFW-1,
rotating, number of revolutions until µ=0.1 ........................... 5,500oscillating, number of oscillations until µ=0.08 ..................... 1,000coefficient of friction, after running in, µ ..................................<0.1
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification forthis product and use it as a basis for your specifications. It may be obtained from anyDow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (517) 496-6000.
Dow Corning CorporationMidland, Michigan 48686-0994
Molykote is a registered trademark of Dow Corning Corporation.©1996 Dow Corning Corporation. All rights reserved.
Printed in USA AMPM8088 Form No. 10-620-96
STORAGE AND SHELF LIFEMolykote D 10 Anti-Friction Coatingcan be stored for 5 years from the dateof manufacture at ambient tempera-tures in its original, closed container.
PACKAGINGMolykote D 10 Anti-Friction Coating is available in 5-kg (11-lb) and 50-kg(110-lb) containers.
SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS AND CON-TAINER LABELS FOR SAFE USE,PHYSICAL AND HEALTH HAZARDINFORMATION. THE MATERIALSAFETY DATA SHEET IS AVAILABLEFROM YOUR DOW CORNING REP-RESENTATIVE, OR DISTRIBUTOR,OR BY WRITING TO DOW CORNINGCUSTOMER SERVICE, OR BY CALL-ING 1-517-496-6000.
LIMITED WARRANTY—PLEASE READ CAREFULLYDow Corning believes that theinformation in this publication is anaccurate description of the typicalcharacteristics and/or uses of theproduct or products, but it is yourresponsibility to thoroughly test theproduct in your specific application to determine its performance, efficacyand safety. Suggestions of uses shouldnot be taken as inducements toinfringe any particular patent.
Unless Dow Corning provides you witha specific written warranty of fitness for a particular use, Dow Corning’ssole warranty is that the product orproducts will meet Dow Corning’sthen current sales specifications. DOW CORNING SPECIFICALLYDISCLAIMS ANY OTHER EXPRESSOR IMPLIED WARRANTY, INCLUD-ING THE WARRANTIES OF MER-CHANTABILITY AND OF FITNESSFOR USE. Your exclusive remedy andDow Corning’s sole liability for breachof warranty is limited to refund of thepurchase price or replacement of anyproduct shown to be other than aswarranted, and Dow Corning expresslydisclaims any liability for incidental orconsequential damages.
MOLYKOTE® D 321 RAnti-friction Coating
High Performance
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• For metal/metal combinations with slow to medium fast movements and high loads.
• Suitable for the permanent lubrication of highly stressed sliding guides with low sliding speeds, oscillating movements or intermittent operation.
• Improving the running-in process and for lubrication under high vacuum and at extreme temperatures.
• Used successfully for cylinder-head bolts, toaster guides, car mirror adjustment mechanisms, high voltage switches, for the running-in of highly stressed gear wheel.
• Emergency lubricant for parts of the rotor head of wind energy installations and for groove-free cold extrusion of steel.
Color Grey-black
Physical propertiesViscosity at 20°C (DIN3 cup) sDIN 53211/3Density at 20°C 1.07g/mlDIN 53217/2Nonvolatile content 29%CTM 0242 IStorage life 24months
TemperatureCuring time 5/23min/°CService temperature range -180 to +450°C
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ b =4500
p=12500s=6800
NASTM-D2625
LFW-1, rotating¹ b = 212ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutes
p=146
no. of revolutions x1000 to μ=0.1 s=306LFW-1, oscillating¹ b = 178ASTM-D2714F=900N, frequency=89.5osc./minutes p = 400no. of oscillations to μ=0.08 s = 362
FEATURES
Air drying•
Avoidance of stick-slip•
High ageing resistance•
COMPOSITION
Solid lubricants•
Solvents•
Binder•
TYPICAL PROPERTIES (continued)
TestStandard* Unit Result
Coefficient of frictionPress-Fit test, μ = 0.075
1. Surface pretreatment: b = blank, p = phosphated, s = sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE D 321 R Anti-Friction Coating. Phosphatization or sandblasting (180 grit) increases the adhesion and service life.
How to apply
Stir the Anti-Friction Coating thoroughly before applying by spraying or brushing.
Recommended dry film thickness:5 to 20μm.
Curing
5 minutes at 23ºC
Solubility
Thinning can be carried out using MOLYKOTE® L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, MOLYKOTE D 321 R Anti-Friction Coating has a usable life of 24 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as
warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
13/11/1998
DC 2904Ref. no. 71-0219A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
�������� /2���!�
��*7!�������" *������)��!� -�!7 ����" ��8�����!� .�� ����(8�% ��"���*�!��( ��8����!��� �. (�!����� ��()����!�
������������� ������ ������ �� ������ ���� �;�� �� � ����� ���� @ ��:����� M����M���������@ � �������� � ��� � ������ ���� �
� I �� ���� �����@ ��� �;�����@ � ��� ������ ���� �� ��������� ������ �� �������� @ ���,���� �� ������ ��������@ ����� �� � ���� @�������� � ���� ��� �� �������� ��� ��@ � ���� � � �;��� �� ��� �� ����� �� ���������
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� !���
������!���%& "����!%& '������!%
"�) (%*+ I���,�� ������� ���%- (&$�*%$
"�) (&%% �� �� � (-/ 01&/23 ���� %�%
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23% ��(� %%-
��()���!���
������� ��������� / �($ � 5%($
/2 �*% � 5($+
8��9 ��%.+&�&-
��� ��������� ��:�� � � �(-/ 0�./23
"���� ����,����� ��:�� #� %(.;%-�*
���:�� ���� (- ���� ���� ��� #� 1*;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ��� ��(-/ 0�./23
���� (--
���"�����%��* ��)���!%& -��� )��!��!���
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # .&--
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� -�+$
8����!����� ������
)= ���� # (----
2������� ����� # %$1-
���..�����! �. .���!���
��� �2� � N O -�%-@ � ����
����!����
�"# $% &-+ ��% !��� �� � ���@ ��� �������� �� (�6-
�"# $% &-& );����� �� � ���@ ��� ��� ���� ����%--�@ 66/ 0(%-/23
��� -�&
�����"��! ��.��(�!���
���������������
���$ ��
� ����������� ���� ������������ �������� '��� ������� � ��� �� ������� ����� � ���
� ����� ��,� ��� �� ��F���� '��� ����� �� �������� B;����� ������� ���� ������� ����
�����������
� 9����� ���� ������ ���� ����� ������� � ���� �� �������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��������� )��!��!���
�"# $% &-( �=2�B���� �����
������ �� ����� �� (�*
2���� ����� �� � ������ � �� 7*1;%-1
��� ��)���!���
�"# $% &%+ )�� �������@ ����� � > *�&
%� �������� �� �� �� ����� �� �� � ��� ��;����? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�%��� ���� ��� ����� �� ������@�������� �� ����� �� � ����� ��������� � �� � ������ ��� �� " �� ����������� �� � ���� � �� �� �������������� � ��� B;�� ������������ � �����
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ������� ������ ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � ��������� �� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B �P �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( %*�-6�(--( ��� ���� �� 9)�A=)�B ��� ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%*$4�-% � *1** J(--( ��� ���� ��������� 8�� ���� �� ������
High PerformanceLubricants MOLYKOTE®EM-30L
Grease
FEATURES Lubricating grease developed for plastic components
APPLICATIONS � Automobiles, electrical appliances, precision equipment, audio equipment, and office
equipment that have plastic parts.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard* Parameter Unit Value Appearance White Base oil viscosity at 40ºC mm²/s 90 JIS K 2220 Penetration (worked 60 times) 325 NLGI class 1 Service temperature range ˚C -45 to 150 Density g/cm³ 0.91 JIS K 2220 Drop point ˚C 195 JIS K 2220 Bleed (100ºC24 hours) % 5.0 JIS K 2220 Evaporation (99ºC22 hours) % 0.4 JIS K 2220 Oxidation resistance (99ºC100 hours) MPa 0.02 JIS K 2220 Copper corrosion (100ºC 24 hours) 1A ASTM D 2596 Four ball weld load (1500rpm/1minute) N 3730 ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) mm 0.5 JIS K 2220 Low temperature torque test (-40ºC) Starting torque mNm 110 Running torque mNm 51 *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials.
HOW TO USE Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONSThis product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 250ºC, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
� Compatible with most plastics
� Can be used for plastic-plastic contact, metal-metal contact and plastic-metal contact
� Long service life
� Low seepage, so it can be used in places wherein cleanliness is required
� Does not contain silicone thereby preventing problems with contact point failures
COMPOSITION� Poly-±-olefin
� Lithium soap
� PTFE, etc.
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 10/11/2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3106A-01 �2006 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGINGThis product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
High Performance Lubricants MOLYKOTE®EM-50L
Grease
FEATURES Lubricating grease developed for plastic components
APPLICATIONS � Automobiles, electrical appliances, precision equipment, audio equipment, and office
equipment that have plastic parts. � Used as a damper grease to reduce noise in moving parts such as gears.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard* Parameter Unit Value Appearance Translucent White Base oil viscosity at 40ºC mm²/s 1050 JIS K 2220 Penetration (worked 60 times) 325 NLGI class 1 Service temperature range ˚C -40 to 150 Density g/cm³ 0.84 JIS K 2220 Drop point ˚C 195 JIS K 2220 Bleed (100ºC24 hours) % 2.5 JIS K 2220 Evaporation (99ºC22 hours) % 3.0 JIS K 2220 Oxidation resistance (99ºC100 hours) MPa 0.02 JIS K 2220 Copper corrosion (100ºC 24 hours) 1A ASTM D 2596 Four ball weld load (1500rpm/1minute) N 1400 ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) mm 0.71 JIS K 2220 Low temperature torque test (-40ºC) Starting torque mNm 290 Running torque mNm 140 *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials.
HOW TO USE Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONSThis product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
� Compatible with most plastics
� Effective in reducing noise from plastic gears
� Long service life
� Low seepage, so it can be used in places wherein cleanliness is required
� Does not contain silicone thereby preventing problems with contact point failures
COMPOSITION� Poly-±-olefin
� Lithium soap
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 10/10/2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3105A-01 �2006 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGINGThis product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
High Performance Lubricants MOLYKOTE®EM-60L
Grease
FEATURES Lubricating grease developed for plastic components
APPLICATIONS � Automobiles, electrical appliances, precision equipment, audio equipment, and office
equipment that have plastic parts. � Components requiring lubrication at low torques and low temperatures.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard* Parameter Unit Result Appearance White Base oil viscosity at 40ºC mm²/s 18 JIS K 2220 Penetration (worked 60 times) 325 NLGI class 0 Service temperature range ˚C -60 to 130 Density g/cm³ 0.88 JIS K 2220 Drop point ˚C 195 JIS K 2220 Bleed (100ºC 24 hours) % 5.0 JIS K 2220 Evaporation (99ºC 22 hours) % 0.3 JIS K 2220 Oxidation resistance (99ºC 100 hours) MPa 0.02 JIS K 2220 Copper corrosion (100ºC 24 hours) 1a ASTM D 2596 Four ball weld load (1500rpm/1minute) N 3140 ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) mm 0.77 JIS K 2220 Low temperature torque test (-40ºC) Starting torque mNm 39 Running torque mNm 20 *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials.
HOW TO USE Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONSThis product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 250ºC, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
� Compatible with most plastics
� Can be used for plastic-plastic contact, metal-metal contact and plastic-metal contact
� Long service life
� Low seepage, so it can be used in places wherein cleanliness is required
� Does not contain silicone thereby preventing problems with contact point failures
COMPOSITION� Polyalfaolefin (PAO)
� Lithium soap
� PTFE, etc.
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 10/10/2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3081A-01 �2006 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGINGThis product is available in 1kg cans (10 cans/case) and 15kg pails.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
�������� 0 �?@+�*7 ���.��(���� ������
+�*7 )��.��(���� *����� .�� (�!��9(�!�� ��(8���!������'��'��* ���- !� (�"��(�.��! (�'�(��!� ��" ��*7! !� 7��'%���"��*�& )��!�������% �! 7�*7 !�()���!����
������������� ������� ��� ��������� ��� ��� ���� � ����� ������ �� ��� � ������ ���� @ ����������� �� � �;�� �� � ������ ���� ��������� �
� I �� ���� ����� � ���� �� ������ ������ �� ������� � ������ � �����,�� @ ������F�� ��� @ ����� � ������ @ �� �� ������� ���� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,
������!���%& "����!%& '������!%
�"# $% &%& #�'" �� � ��� ��� (
"�) (%*+ !��,�� ������� ���%- (1$�(6$
"�) (&%% �� �� � (-/ 01&/23 ���� -�&1
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23% ��(� (1-
��()���!���
������� ��������� / �*- � 5%1-@ 5%&-��� ��� ������
/2 �(( � 5*(-@ 5*$1��� ��� ������
"�) (%+1 ���� ��� / �/2 #��
8��9��%.+&&- ��� ��������� ��:�� � � �(-/ 0�./23
"���� ����,����� ��:�� #� $6*;%-�*
���:�� ���� (- ���� ���� ��� #� 1&;%-�*
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # ((--
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� %�*
8����!����� ������
)= ���� # (----
2������� ����� ��� )= ���� # *-&$
��������� )��!��!���
�"# $% &-( �=2�B���� �����
������ �� ����� �� -�%
�����"��! ��.��(�!���
���������������
���$ ��
� ��� � ���� �� ��,��� ������� ��� ������� ��������� ��� ���� ��� ��������� �� ��� ���������� �;�����
� B������� ���� �������� ��������� �� ���� �� ����� ������������ ���� �������
� #� ���� ���� �� �:���� � ������� ����� ���� ��������� ���
� '��� ���� �� ��� �� � ���
�����������
� 9����� ���� "������ ���,���� ���� �� ������� � ����� �������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��� ��)���!���
�"# $% &%+ ������ � > (�-
%� �������� �� �� �� ����� �� �� � ��� ��;����? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�% ��� ��� �� ����� 8���� � ������ � ��������� ���� � @ � ����� �@ �����@ ���� ���� �� ���������������� ������� ������� ����������� �� ����� ��������� � ����� � ��; ��� ���� ���� � �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 24 %&- C��� ���������� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( ($�-%�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%1. �-% � (66+ J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
Product Information
Specialty Lubricants Molykote®
Food Grade
Spray Oil
FEATURES
Multi purpose mineral oil spray for food processing equipment
APPLICATIONS � Lubrication of mechanical components in food & beverage processing
equipment
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales office or your Global Dow Corning
Connection before writing specifications on this product.
Standard Test Unit Value
Color Transparent
Viscosity DIN 51 562 Base oil viscosity at 40�C mm²/s 96 ASTM D 562 Base oil viscosity at 100�C mm²/s 11 ASTM D2270 Viscosity index of base oil 102
Temperature Service temperature range °C -10 to +120 ASTM D97 Pour point °C <-10
Load Carrying Capacity, Wear Protection, Speed DIN 51 350 Four-Ball Tester (VKA), mm 0.5 Wear Scar under 40 kg Load, 1200 rpm
Corrosion Protection
ASTM D665 Corrosion protection Pass
ASTM: American Society for Testing and Materials. DIN: Corporate Deutsche Industrie Norm. ISO: International Standardization Organization.
DESCRIPTION Molykote® Food Grade Spray Oil is a
multi-purpose mineral oil aerosol. It is
suitable for applications in the food,
pharmaceutical and similar industries.
HOW TO USE Shake well before use. Clean contact
surfaces before spraying.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
� Easy to use
� Good penetration
� High corrosion protection
� High load capability
� Meets FDA Regulation 21 CRF
178.3570 and USDA H1
Classification for incidental food
contact
� Odorless and tasteless
COMPOSITION
� Mineral oil
� Corrosion inhibitor
� EP/AW additive
� Propellant
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Food Grade Spray Oil June 23, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3197-01 FPH 35600 �2003 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored at or below 23 °C in the
original unopened containers, this
product has a usable life of 24 months
from the date of production.
PACKAGING This product is available in 400ml
spray cans.
LIMITATIONS This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND ENVIRONMENTAL
INFORMATION To support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Suggestions of use shall not be taken
as inducements to infringe any patent.
Dow Corning's sole warranty is that
the product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
High Performance Lubricants Molykote® G-0010
Multipurpose Bearing Grease
Multipurpose Polyurea-thickened bearing grease
APPLICATIONS �� Electrical motors
�� Fan bearings
�� Water pump bearings
�� Dryers in chemical and paper industries
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard Test Unit Value
Color Green
Base oil type Mineral oilThickener type Polyurea
ASTM D 217
Consistency, Viscosity
Consistency NLGI Class 2
Worked Penetration mm/10 265 - 295ASTM D 445 Base oil viscosity @ 40°C mm²/s 125
Temperature
Service temperature range (est.) °C -30 to +170
°F -20 to +340ASTM D2265 Dropping point °C (°F) > 260 (> 525)
FTMS 791C-321.2
Oil Separation/Evaporation
Oil separation (24 hrs/ 100°C) Mass-%
2.3
Evaporation loss (24 hrs/ 100°C) Mass-% 0.1
Load Carrying Capacity, Wear Protection, Speed
ASTM D 2596 Four Ball Tester Weld load kg 315ASTM D 2266 Wear scar under (40 kg; 75�C; 1 hr) mm 0.60
Dn value (DR x rpm; estimated) 400 MASTM D 1743 Corrosion prevention 1, 1, 1 Pass
ASTM: American Society for Testing and Materials FTMS: Federal Test Methods
FEATURES
��Wide temperature range
��Extreme Pressure lubrication
��Excellent corrosion-preventive
properties
��Shear resistant
COMPOSITION ��Modern polyurea
thickener
��Mineral base oil
��Corrosion inhibitor
DESCRIPTION Molykote® G-0010 is a mineral
oil-based grease thickened by a di-urea
system. Molykote® G-0010 offers excellent
low temperature properties and load-carrying
characteristics. Molykote® G-0010 provides
premium rust prevention and due to its
polyurea thickener superior shear and
oxidation stability.
HOW TO USE Apply using conventional grease application methods, i.e., clean brush, grease gun and manual or automated dispensing equipment.
HANDLING PRECAUTIONS Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
USABLE LIFE AND STORAGE When stored between 0 and 40°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING This product is available in 400g cartridges, 16kg pails, and 180kg drums.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTAL INFORMATION To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Molykote® G-0010 Multipurpose Bearing Grease June 18, 2003
We help you invent the future is a trademark of Dow Corning Corporation.
Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3280-01 FPH 35597 ~2003 Dow Corning Corporation. All rights reserved.
�������� ��=6@@9��=6@����!��)��)��� �%�!7�!�� *�����
,7�!� .��" *��"� �%�!7�!�� *������
������������ '����� ����� � ���� �� � ��� ���� ����� ���� � �� �� � �� � ����������� �� ���� ������ @ ���� �� @ ��� @ ����� @ ��� @ ����� ���� @ ���� @ ���� �� ���� ������ ����� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
����# ���)��!% $��! 1����
��=6@@ ��=6@�
������!���%& 1������!%& �)���.�� ���'�!%
�"# $% &%& #�'" �� � ��� ��� ( %
8��9 �(%+ ������� � ($/ 0++/23 0!�1-3 ���%- (1$�(6$ *%-�*.-
8��9 �..$ 4� � ��� �� �� �� � .-/ 0%-./23 �� %-- %--
8��9 �..$ 4� � ��� �� �� �� � %--/ 0(%(/23 �� %.�. %.�.
"�) (&%% �������� ������ � ($/ 0++/23 ���� -�&. -�&*
��()���!���
���������� ���� 0�����;����3 / �.- � %$- �.- � %$-
/2 �.- � *-( �.- � *-(
8��9 �((1$ ������� ��� / 7(+- 7(1-
/2 7$%& 7$--
2� +6%�*(�( )�� �����@ (. ���� @ %--/ 0(%(/23 �> *�% .�+
2� +6%�*(�( )�� ���������@ (. ���� @ %--/ 0(%(/23 �> -�. -�$
8��9 �.16* ������������� ��:�� � �.-/ 0�.-/23 #� -�6 -�+
���" ����%��* ��)���!%& ,��� ���!��!���& �)��"
8��9 �((11 2�������� ����@ .-,�@ %(--��� �� -�$ -�$
8��9 �($61 2�������� B�@ ���� ����@ ������ # 7*@%-- 7*@%--
8��9 �($-6 �"9=B# � @ )= ���� ,� 7%& 7%&
�@ ������ "� 0��3;0���3@ � ����� *($@--- *($@---
? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
�����"��! ��.��(�!���
���������������
���$ ��
� !��� ������ ��������� ����� �������� ��� ��� ��� �� ����� ����
� 9�� 2�8 E������� (% 2E %+&�*$+-�� I��8 C% ��� ������� ���������� ���� ����
� 2���� ����� �� � ���� !��� ������ 8�������� � #�'" �� � ������ � % �� (
0������
� 2�������� � ������� ������ ����������� �������@ ������ ���� �� � ����� ����� ������ ���� �������� ��������� ����������� �� �������
� ������� ���� ����������� ��� �� ��� ���� �� �������� �� ��� ������� ��� ��� �� �� �������������
� B;����� ��� ��������� ��:��� ��� �� � ��� ��������� �� '�.$-%����� � � � ������� �� �� �� � ��
�����������
� �8) �� � ���� 8������ ������; ���,���� 2������� ��� �������������������0��2B3
/��� ������9)�A=)�B '�.$--�'�.$-%9��������� � ����� ���� � ������������������ ���� � �� �������� ����� �� ���� ���������������� ���� �� ���������������� ��� ������ ������� �4�� ��� ���,��� ��� � �������������; �� ���� ���� ����������� � ���� �� �� � �� ��������� ������ @ ���� @ ���� �� ����� ������ � � ���� ����� �����������
+�, �� $��8���� � �� �������� ���� ���������� ����� @ ����@ ���� ��� �@���� � �� �� ����� �� ��������� �� �� �:������
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� .-/ 0%-./23� �� ������� ������ ������ @�� � ������ ���� � � ���� ���� ��1- ��� ���� �� ��� �� ���������
������������ � ������ ��� ��������� �������� ����� ������ �F� �������� ������ �F� �������� ����� �� ������ ���� ���� ���� ��� ���� ���� )����� ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � ��������� �� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(---3(��%A�!�3��(
9)�A=)�B '�.$--�'�.$-% 9��������� � ����� ���� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -(�%-�(--( ��� ���� �� 9)�A=)�B ��� ���� ���� �������, �� ��� ���� ���������
E��� �� &-�*%$-�-% � ..(( J(--( ��� ���� ��������� 8�� ���� �� ������
��������
�� �)�" ��������" ��8�����! )��!�
����" ��8����!��* )��!� -�!7 )��!�������% ��- .���!��� ���..�����!.�� ����(8�% ��" ������*��� �. (�!����� ��()����!�
������������� ������� ��� �� ��� ��� �������� �� ��� ��� �� ������ ����� @ � ������� ������� ��� �� ������ �� ���� @ � ������ ��������� �������� ����� ����� ��� ������ � ���� �� ������ ������ ���@� ���� � ��� �������@ ���� �� �����������
� I �� � �������� ������� ����� @ ����� ��� @ ��� ������@ ���� ������@����� ���� @ ���� @ ���� @ ����� � ������ ��� @ � ���� � ��� �������� �� ������ ������ @ ������ @ ����� ����� �� ��� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,
������!���%& "����!%
I���,�� ������� ���%- ($$�(+$
�� �� � (-/ 01&/23 ���� %�.-
��()���!���
������� ��������� ���� / �*$ � 5.$-
/2 �*% � 5&.(
���"�����%��* ��)���!%
�"# $% *$- ��. 2�������� � ��
!��� ���� # $*--
8��� !����� ������ )= ���� # 7(----
���..�����! �. .���!���
" ����� ������ 9%(@ &�& �������,��� ������ 0B���� � � ��3@
� N ����� -�%-
� N ���� -�-1
��� �2� � @ N -�-$@ � �����
����!����
�"# $% &-+ ��% !��� �� � ���@ ���@ �������� %�6-
? �"#� ��� ��� "�� ��� #���
+�, �� $��+�- !� �))�% ��� �� ����� ������ �� �������� @ �� ����� �� � ��� � ��� �@����@ ����� ���� �� ������������ �� � � � � �;�� � ���
���� � ���������� <������ �������� ���� ������ ���� ����������� ��� �� � ��; ��� ���� � ����� �
�����"��! ��.��(�!���
���������������
���$ ��
� ��� ������ ���������� C��� ��� ������ ����� �������� ����� ��F��� �� ������ ������ � ��,� ���� E����� ������� �� ����� ����� ��� 2������� �� � ������ '��� ��������� ������� �������� ��������������
�����������
� 9����� ���� ����� �������
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B '�E���� ��� ����� ������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�--&. �-% � (6*% J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
MOLYKOTE® G 67Extreme pressure grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Standard* Unit Result
APPLICATION
• Spur gear systems, load chains, settling shims, springs, shaft-hub connection, encapsulated joints, gears, linear motion guides.
Color Beige
Penetration, density, viscosityNLGI consistency class 1DIN 51 818Worked penetration 310-340mm/10ISO 2137Density at 20°C 1.12g/mlISO 2811Base oil viscosity at 40°C 115mm²/sDIN 51 562
TemperatureService temperature -25 to +120°CDrop point 155°CISO 2176
Load-carrying capacity, wear protection, service lifeFour-ball tester (VKA)Weld load 4800NDIN 51 350 T.4Wear scar under 600N load 0.75mmDIN 51 350 T.5Almen-Wieland machine, OK load 20000NFretting corrosion - Deyber tester >36x10¦
ResistanceOxidation resistance, pressure drop 100h, 99°C
2.5barDIN 51 808
Corrosion protectionEmcor method 0-1DIN 51 802
Coefficient of frictionSteel ball against plastic surface (POM)Ø ball = 12.7mm, load = 6.3N, v = 10mm/s, 24h
0.08μ
Oil separation - evaporationOil separation - standard test 4.3%DIN 51 8177 days, 40°CFed-Standard
791-32-2
* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
FEATURES
Excellent protection against fretting corrosion
•
Good load carrying capacity•
High level of protection against wear
•
Particularly adhesive•
COMPOSITION
Mineral oil•
Lithium soap•
Adhesion improver•
Solid lubricants•
HOW TO USE
How to apply
Clean points of contact. Apply in same way as lubricating greases, using brush, spatula, grease-gun or automatic lubricating device. Suitable for delivery by central lubricating system. In the event of long breaks in service e.g. overnight, the pressure in the delivery equipment should be relieved. Not to be mixed with other greases.
Because of variation in quality of plastics and elastomers, compatibility tests should be carried out for swelling and shrinkage, stress-crack formation, and changes in strength and hardness.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in 1kg cans, 400g cartridges and 5kg drums.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health,
Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1998-2001 Dow Corning Corporation. All rights reserved.
30/11/1998
DC 4079Ref. no. 71-0317-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
DOW CORNING®High-Vacuum GreaseSilicone compound
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Stiff, non-melting silicone lubricating material
Standard* Unit
APPLICATIONS
• Seals and lubricates chemical processing equipment.
• Lubricating plug valves, control valves, flow meter bearings, ceramic plug cocks, fire extinguisher valves, water treating equipment, synthetic rubber gaskets and seals in high temperature applications.
• Sealing vacuum and pressure systems.
• Lubricating O-rings in binoculars and telescopes. Prevents fogging of delicate lenses.
Color White to grey, translucent
Physical nature Stiff compoundPenetration, unworked 175 to 210mm/10ISO 2137Penetration, worked 60, max. 260mm/10ISO 2137Bleed, 24 hours; 200°C <0.5%CTM 0033A AEvaporation, 24 hours; 200°C <2.0%CTM 0033A BMelting point None°C
* CTM: Corporate Test Method, copies of CTMs are available on request.
FEATURES
Good lubricating and sealing ability•
Low volatility•
Excellent resistance to water, chemicals, high and low temperatures
•
COMPOSITION
Silicone oil•
Inorganic thickener•
PERFORMANCE DATA
Solubility
DOW CORNING High-Vacuum Grease is insoluble in water, methanol, ethanol, acetone, glycol and glycerine. It can be dispersed in kerosene, stoddard solvent, benzene, toluene, ethyl ether or petroleum ether.
Chemical resistance
DOW CORNING High-Vacuum Grease is unaffected by most vegetable and minerals oils, many organic compounds, and most common gases. It is also resistant to most aqueous solutions of inorganic salts and to dilute acids and alkalies. The suitability of DOW CORNING
High-Vacuum Grease should always be tested before the material is adopted for regular use.
HANDLING PRECAUTIONS
In case of eye contact, flush eyes with water.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL
DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as
warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
23/11/1998
DC 3677Ref. no. 22-0911C-01
2 ® DOW CORNING is a registered trademark of Dow Corning Corporation.
Product Information
High
Performance
Lubricants
FEATURES
� Compatible with most rubber and plastics
� Excellent stability at high temperatures
� Superior resistance to chemicals and
solvents
� Minimal deterioration due to oxidation,
appropriate for long-term lubrication
� Low vapor pressure (base oil)
COMPOSITION
� Perfluoro polyether
� Fluorinated polymer
� Corrosion inhibitor
MOLYKOTE®HP-870
Grease
Fully fluorinated grease provides extraordinary performance
under extreme conditions
APPLICATIONS
� MOLYKOTE HP-870 Grease can be used broadly under harsh conditions such as
high temperatures, corrosive, solvent, liquefied natural gasses, high vacuum, etc.
� This grease is ideally used for use in clean rooms, semiconductor manufacturing
equipment, cardboard manufacturing equipment, hot air dryer motor axles, etc.,
where the evaporation of the lubricant could be problematic.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales representative prior to writing specifications on
this product.
Standard* Parameter
Appearance
Unit Value
White
JIS K 2220 Penetration (worked 60 times)
Service temperature range
NLGI class
Density
mm/10 280
ºC -20 to 250
2
g/cm3 2.0
MIL-S-8660 Bleed (200ºC 24 hours)
MIL-S-8660 Evaporation (200ºC 24 hours)
MIL-S-8660 Evaporation (200ºC 1000 hours)
ASTM D2596 Four ball weld load (1500rpm/1minute)
%
%
%
N
5.0
1.0
3.0
>4900
ASTM D2266 Four ball wear scar (1200rpm, 392N, 1 hour) mm
JIS K 2220 Low temperature torque test (-20ºC)
1.3
JIS K 2220
DIN 51 802
Starting torque
Running torque
Low temperature torque test (-40ºC)
Starting torque
Running torque
Emcor corrosion test
Base oil vapor pressure 20ºC
Ncm
Ncm
Ncm
Ncm
Pa
54
28
Not
measurable
Not
measurable
0 to 1
2x10-6
* JIS: Japanese Industrial Standard.
ASTM: American Society for Testing and Materials.
MIL: Military Specification and Standards.
DIN: Deutsches Industrie Norm.
HOW TO USE
Clean points of contact. As is usual
with lubricating greases, apply or fill
by means of a brush, spatula, or
automatic lubrication device.
HANDLING PRECAUTIONS
Although MOLYKOTE HP-870
Grease is extremely chemically stable,
it gradually begins to break down at
temperatures in excess of 250ºC
releasing a toxic gasses; be sure that
this product is only used in an
environment with adequate ventilation.
Do not smoke cigarettes if they have
been in contact with this product. Be
sure to wash your hands thoroughly
after working with this product.
Product safety information required
for safe use is not included.
Before handling, read product and
safety data sheets and container labels
for safe use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.molykote.com.
You can also obtain a copy from your
local Dow Corning sales representative
or Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE When stored, unopened in a cool, dark
place this product, has a usable life of
36 months from the date of production.
PACKAGING
This product is available in 100g
plastic cans and 750g collapsible
cartridges.
LIMITATIONS
This product is neither tested nor
represented as suitable for medical
or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION To support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLY The information contained herein is
offered in good faith and is believed
to be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customers' tests to
ensure that Dow Corning's products are
safe, effective, and fully satisfactory
for the intended end use. Suggestions
of use shall not be taken as
inducements to infringe any patent.
Dow Corning's sole warranty is that the
product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Website Guide
For more information on our
company and how to contact us, visit
our website, www.molykote.com
We help you invent the future."
MOLYKOTE HP-870 Grease
2
Ref. no. 80-3077B-01
21/02/2007
DC 4422
We help you invent the future. is a trademark of Dow Corning Corporation.
MOLYKOTE and DOW CORNING are registered trademarks of Dow Corning Corporation.
©2002, 2003 Dow Corning Corporation. All rights reserved.
�������� +��<@@������
���% .������!�" *����� )��'�"�� �>!����"����% )��.��(������"�� �>!��(� ���"�!����
������������� 9)�A=)�B C��*-- '��� � �� �� � �� ������� ���� ��� � ������ ��� � ��� �� ���� ��������� @ ����� ���@ ����@ ��:������ ����� �� � @ ����������@ ���
� ��� ���� �:����� �� ���������� ���������� �:����� ����� �������F��� �� �� ��������� ������� � ��� �������
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ����(�!�� $��! 1����
8�������� !���
L"� = (((- ������� 0���,�� 1- ��� 3 ���%- (&-
#�'" ��� (
������� ��������� ���� / �1$ � ($-
�� �� ����* (�-
9"����&11- 4���� 0(--/ (. ���� 3 > &�-
9"����&11- B�������� 0(--/ (. ���� 3 > -�(
9"����&11- B�������� 0(--/ %--- ���� 3 > %�-
8��9 �($61 2��� ���� ���� ���� 0%$--����%����3 # ***-
8��9 �((11 2��� ���� ���� ��� 0%(--���@ *6(#@ % ����3 �� %�%
L"� = (((- ��� ��������� ��:�� � 0�(-/ 3
����� ��:�� #�� .�%
E��� ��:�� #�� %�&
L"� = (((- ��� ��������� ��:�� � 0�.-/ 3
����� ��:�� #�� %%
E��� ��:�� #�� *�1
4� � ��� ����� ��� ��� (-/ �� .;%-�%-
? L"�� L���� � "�� ���� �������8��9� 8������ ������ ��� �� �� �� 9������ �9"�� 9������ ����������� �� ������ �
+�, �� $�� ��� ��� �� ���������� 8 � � ������ ��������� ���� � @ ����� �� ������ ��� �� � ��� �@ �����@ ��������� ��������� �������
���"��! ��.��(�!���C��������������������
���$ ��
� �������� ��� �� ������ �� ��� �� � B;����� ������ � ���� ��������� � �������� �� � ��� � �������� �� ����
� 9����� ���������� ��� � �;�����@���������� ��� ������� ���������
� ��� ����� ��� ��� 0�� � ���3
�����������
� ��������� ��������� 2�������� �������
+��/���� � ���$�����8������ 9)�A=)�B C��*--'��� � � ������ ���������� ����@ ���������� � �;�� �� ($-/ ��������� ���� ��������� ������� � ������� � �;�� �� � D �� ��� � �������:��� ������� �� ��� �;��� ��������� � ������� �� �� � ��,�������� �� ��� �������� ����� ������� 4� ��� � �� � ��� ��������� ���� � ��
������ ���� �������� ��:�������� ��� � � � � ��������4����� ������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@ ��� ���� �� ����� ��F������������ ��� ������� ���� ��� ��� � ��������� � �� ��� ������� �� � ��������,�������A�� �� �� � ���� � ���� ���� ��������� ��� ���� ��� ����� ������� �� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ����@ ������ � � ����@ ���,����� �� ������@ �� � � ���� ���� ��*1 ��� ���� �� ��� �� ���������
������������ ������ � ��������� � %--� ��$--� ��� �� �� �
�������������� ������ � ����� � �� ������� ��� � ������ ��� ��������� ������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � ��������� �� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � � �� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
,�8��!� ���"��� (��� ��.��(�!��� �� �����()��% ��" 7�- !� ���!��! ��& '���!��� -�8��!�& ---3(��%A�!�3��(
�� ���� �� ���� �� � ����
9)�A=)�B C��*-- '��� � �� ���� �� ���� �� � ��� � � �������, �� ��� ���� ���������( ((�%(�(--* 9)�A=)�B �� �)! )E#"#' ��� ���� ���� �������, �� ��� ���� ���������E��� �� &-�*%-*8�-% %11-& J(--(@ (--* ��� ���� ��������� 8�� ���� �� ������
�������� +�� )�������" ��8�����! )��!�
����" ��8�����! )��!�B ���!���� �� ���" �� ���A��
������������� 2�� ��������� �������� �� ��� ��K���� � ���� ��������� ���������� ���� �����@ �������� ��� ����� K�� @ ��� ���� ���� ���� �� ��,���
� ������� ��� ��������� ��� ��� ��� ���� @ ��K���� � ���� ��������� �� ����� ��� ����� @ �� �� � ��:���� � ��� �� �� � ��������� �� �������8 � ���� ������� ��� ����������� ������� ������ �
� I �� ���� ����� ��� �� ��� �� �� �� ��� ����� @ �� ��� ������������� �� ��� �� ���� @ ������ ������ � �������� �������������� ��� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� �����
����!��!���& "����!%& '������!%
"�) (%*+ I���,�� ������� ���%- ($-�(&-
"�) (&%% �� �� � (-/ 01&/23 ���� %�.
��()���!���
������� ���������% / �*- � %%--
/2 �(( � (-%(
"�) (%+1 ���� ��� / #��
/2 #��
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # .&--
�"# $% *$- ��$ !��� ��� ���� .--# ���� �� -�1
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� %�%
8����!����� ������
)= ���� # (----
2������� ����� # %+--
�����"��! ��.��(�!���
���������������
���$ ��
� � �� � �� ���� � ���� ���� �����������0�*-/ ��((/2 � %%--/ �(-%(/23
� B���� ���� ������ �� �����@��� ���� ��� � � � ���� ���������
� C��� ������������ �������� ��� � ��� ��������� �� ������@������ ���� �� �� ����� ��� �����K�� �� �� ��������
� '��� ����� �� �������� '��� ��������� ���������
�����������
� 9����� ���� ����,��� ��� � ����� ������� � 9��� ������@ 0���������3
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
���..�����! �. .���!���
����� � � B���� �(
����� � � N ����� -�%.
����� � � N ���� -�-6
"���� ����,����� ��:��* #� %(-
%� ���������� ���� �� ���� ������� (� �������� �� ������ � ����� ������@ 9%(@ &�&@ � ����,��� �������*� 9 %(@ ��� ���� ��:�� 9� O $1#� �� ��� ����� � $.-/ �%--./2@ (%�@��� �������� (% � 9�< $+ �� �� %�++-6�? "�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�%"� �� ����@ ���� �� ����� �� � ����� ��� � ���� ��� �� ������ ����:��� ���� �� �� �� � � ������ ���� � ����� � ���� � ���� ���� 8 �;�� � � �������� " ������ � ���� �� �������� @ �� �� ��� � �� ��;�� ��� ���� � �� ��� �I � ���� �� � ����� � ����� �������� ���� :���,�� �� ������ ������� ���� �� ������ ���� ���� ����� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ������
��� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B C� ��� ����� ������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-(%( �-% � (6-$ J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information High Performance
Lubricants Molykote® Multi-purpose Oils
FEATURES
High-performance multi-purpose industrial lubricants
DESCRIPTIONMolykote® multi-purpose oils provide
protection and lubrication for a wide
range of moving components in
industrial systems. Depending on the
application, your Dow Corning
representative can help you select the
right oil from a range of viscosities,
additive packages.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life for
lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND SPECIFICATIONSMolykote lubricating fluids are kosher
approved and conform to USDA
listing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND STORAGEMolykote multi-purpose oils have a
shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGINGMolykote multi-purpose oils are
available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONSThese products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONSNone.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION• Hydrocracked Mineral oil (MO) -
based lubricants
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product US
DA
/NS
F s
tatu
s
ISO
Gra
de
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Po
ur
Po
int,
°F
Fir
e P
oin
t, °
F
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Multi-Purpose Oils1
L-0532FG Multi Purpose Light Oil2 H-1 32 31.2 5.3 34.3 5.4 103 420 -18 445 0.857 7.13 MO R&O/AW
L-0568 Multi Purpose Oil 2 H-2 68 68.5 9.2 76.3 9.4 110 450 -15 480 0.868 7.22 MO RO
L-0510 Multi Purpose Oil2 H-2 100 103 11.8 104 12.1 9.5 470 -15 495 0.876 7.29 MO R&O/AW
L-0510FG Multi Purpose Oil2 H-1 100 105.1 12 118.2 12.3 103 495 -15 540 0.866 7.21 MO R&O/AW
1Typical values; not for use in preparing specifications. 2The oil date is also displayed in the Molykote® Hydraulic Oils Data Sheet.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products are
safe, effective, and fully satisfactory for
the intended end use. Suggestions of use
shall not be taken as inducements to
infringe any patent.
Dow Corning's sole warranty is that the
product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLYDISCLAIMS ANY OTHEREXPRESS OR IMPLIEDWARRANTY OF FITNESS FOR APARTICULAR PURPOSE ORMERCHANTABILITY.
DOW CORNING DISCLAIMSLIABILITY FOR ANYINCIDENTAL ORCONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Multi-purpose Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3042A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information High Performance
Molykote® Compressor andLubricantsVacuum Pump Oils
HANDLING PRECAUTIONSProduct safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
USABLE LIFE AND STORAGE Molykote compressor and vacuum pump oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for “Use By” date.
PACKAGINGMolykote compressor and vacuum pump oils are available in 18.9- and 208.2-L (5- and 55-gal) containers, except for Molykote® L-0668 Ammonia Refrigeration Compressor Oil, which is available in 208.2- and 1249-L (55- and 330-gal) containers.
LIMITATIONS Do not mix Molykote® L-3232 or L-3246 Synthetic Compressor Oil with mineral oil or PAO-based lubricants. These PAG-based products are not compatible with mineral oil or PAO lubricants.
Molykote® L-0268, L-1568 and L-1510 are intended for use in compressors or vacuum pumps handling corrosive gas such as HCI or methyl chloride. Because these products are not formulated with antioxidants, the total amount of oxygen should be no more that 2% of the gas stream.
FEATURES � Lower overall maintenance costs � Wider temperature range � Longer oil-drain intervals � Reduced lubricant consumption � Extended equipment lifetime � Reduced energy consumption � Long life reduces lubricant usage,
maintenance costs
COMPOSITION
DESCRIPTIONMolykote® compressor and vacuum pump fluids are formulated to meet or exceed the performance of all comparable OEM fill products. Molykote offers solutions for a variety of applications and equipment including rotary and reciprocating equipment, screw, vise, centrifugal and piston compressors and vacuum pumps and blowers. Dow Corning supports oil analysis to ensure that the right product is used for each application and that product and equipment life and performance is maximized.
HOW TO USE
� Mineral oil (MO), polyalphaolefin (PAO), polyalkylene glycol polyolester (PAG/POE), diester (DE) and mineral oil/diester (MO/DE) – based lubricantss
Follow equipment manufacturer’s recommendations for maintenance procedures and oil specifications.
To ensure the longest possible life for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of additives in lubricating fluids. Sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
LISTING AND SPECIFICATIONSMolykote lubricating fluids are kosher approved and conform to USDA/NSF listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
We help you invent the future is a trademark of Dow Corning Corporation. Molykote is a registered trademark of Dow Corning Corporation.
Molykote ® Compressor And Vacuum Pump Oils Dec 6, 2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3002E-01 DIC173925 �2006, 2007 Dow Corning Corporation. All rights reserved.
SHIPPING LIMITATIONS None.
HEALTH AND ENVIRONMENTAL INFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
TYPICAL PROPERTIESSpecification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Molykote® brand Product NSF
S
tatu
s
ISO
Gra
de
Vis
cosi
ty @
4
0°C
, cSt
Vis
cosi
ty @
1
00°C
, cSt
Vis
cosi
ty @
1
00°F
, cSt
Vis
cosi
ty @
2
10°F
, cSt
Vis
cosi
ty
Inde
x
Fla
sh P
oint
, °F
Fire
Poi
nt,
°F
Pou
r Poi
nt,
°C
Spe
c G
rav
@
20°
C, g
/mL
Den
sity
@
20°
C, l
b/ga
l
Bas
e O
il
Add
itive
P
acka
ge
Air Compressor Oil L-1232FG Synthetic Compressor Oil H-1 32 30.2 5.7 33 5.8 138 465 515 -60 0.826 6.87 PAO R&O L-1232 Synthetic Compressor Oil H-2 32 30.1 5.7 32.9 5.8 144 470 520 -60 0.835 6.95 PAO R&O L-3232 Synthetic Compressor Oil H-2 32 39.3 7.9 42.7 8.1 178 510 575 -48 0.974 8.11 PAG/POE R&O L-0246 Compressor Oil H-2 46 46.6 6.8 51.7 7 100 440 450 -18 0.863 7.18 MO R&O L-1246FG Synthetic Compressor Oil H-1 46 47 7.9 51.6 8.1 138 475 525 -42 0.829 6.9 PAO R&O L-1246 Synthetic Compressor Oil H-2 46 44.2 7.7 48.5 7.8 138 515 535 -57 0.838 6.97 PAO R&O L-3246 Synthetic Compressor Oil H-2 46 48.2 9.4 52.4 9.6 183 525 540 -45 0.974 8.11 PAG/POE R&O L-4646 Synthetic High Temp Compressor Oil H-2 46 48.1 7.4 53.3 7.3 111 550 570 -42 0.947 7.88 POE R&O L-1268 Synthetic Compressor Oil H-2 68 62 9 60 9 121 520 580 -54 0.840 6.99 PAO R&O L-1210 Synthetic Compressor Oil H-2 100 98 14 108 14 145 520 550 -48 0.841 7 PAO R&O L-4610 Synthetic Blend Piston Compressor Oil H-2 100 91.7 11.1 103.4 11.4 101 500 520 -15 0.880 7.52 MO/DE R&O L-4611 Synthetic Reciprocating Compressor Oil 100 98 9.5 112 9.8 62 515 555 -28 0.960 8.03 DE R&O
Vacuum Pump OilL-1668FG Synthetic Blend Vacuum Pump Oil H-1 68 63.1 9 70 9.3 113 445 465 -18 0.856 7.12 PAO/MO R&O L-0610 Vacuum Pump Oil H-2 100 106.9 12.4 117.7 12.7 100 500 525 -18 0.867 7.22 MO R&O
Ammonia Compressor OilL-0660 Para Synthetic Ammonia Refrigeration Compressor Oil H-2 68 69 9 77 9 100 440 475 -39 0.87 7.24 MO PPD L-0668 Ammonia Refrigeration Compressor Oil H-2 68 63 6.7 65.4 6.9 59 345 360 -30 0.897 7.46 MO None
Special Purpose FluidsL-1605FG Synthetic Barrier Fluid H-1 5 5.3 2 5.6 2 124 320 345 -60 0.8 6.66 PAO None L-4640 Synthetic Compressor Flush Fluid H-2 32-46 38.6 5.7 42.4 5.8 65 445 520 -42 0.963 8.01 DE R&O L-0268 Process Gas Oil - 68 68 9 76 9 102 420 470 -33 0.848 7.06 MO C1L-1510 Process Gas Oil - 100 100 14 111 14 138 520 572 -30 0.838 6.97 PAO C1L-1568 Process Gas Oil - 68 68 10 75 10 140 516 567 -30 0.834 6.94 PAO C11Typical values; not for use in preparing specifications. 2The H-2 designation indicates the lubricated part cannot have contact with food. 3The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. 4The oil date is also displayed in the Molykote® Hydraulic Oils Data Sheet.
Product Information High Performance
Molykote® Compressor andLubricantsVacuum Pump Oils
HANDLING PRECAUTIONSProduct safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
USABLE LIFE AND STORAGE Molykote compressor and vacuum pump oils have a shelf life of 60 months from date of manufacture. Refer to product packaging for “Use By” date.
PACKAGINGMolykote compressor and vacuum pump oils are available in 18.9- and 208.2-L (5- and 55-gal) containers, except for Molykote® L-0668 Ammonia Refrigeration Compressor Oil, which is available in 208.2- and 1249-L (55- and 330-gal) containers.
LIMITATIONS Do not mix Molykote® L-3232 or L-3246 Synthetic Compressor Oil with mineral oil or PAO-based lubricants. These PAG-based products are not compatible with mineral oil or PAO lubricants.
Molykote® L-0268, L-1568 and L-1510 are intended for use in compressors or vacuum pumps handling corrosive gas such as HCI or methyl chloride. Because these products are not formulated with antioxidants, the total amount of oxygen should be no more that 2% of the gas stream.
FEATURES � Lower overall maintenance costs � Wider temperature range � Longer oil-drain intervals � Reduced lubricant consumption � Extended equipment lifetime � Reduced energy consumption � Long life reduces lubricant usage,
maintenance costs
COMPOSITION
DESCRIPTIONMolykote® compressor and vacuum pump fluids are formulated to meet or exceed the performance of all comparable OEM fill products. Molykote offers solutions for a variety of applications and equipment including rotary and reciprocating equipment, screw, vise, centrifugal and piston compressors and vacuum pumps and blowers. Dow Corning supports oil analysis to ensure that the right product is used for each application and that product and equipment life and performance is maximized.
HOW TO USE
� Mineral oil (MO), polyalphaolefin (PAO), polyalkylene glycol polyolester (PAG/POE), diester (DE) and mineral oil/diester (MO/DE) – based lubricantss
Follow equipment manufacturer’s recommendations for maintenance procedures and oil specifications.
To ensure the longest possible life for lubricating fluids, sample analysis is recommended. When utilized on a regular basis, sample analysis can track normal aging and depletion of additives in lubricating fluids. Sample analysis can identify abnormal contamination that may be limiting lubricant life. Contact Dow Corning customer service for additional information.
LISTING AND SPECIFICATIONSMolykote lubricating fluids are kosher approved and conform to USDA/NSF listing requirements under H-1 or H-2 designations (see Typical Properties table). An H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. An H-2 designation indicates the lubricated part cannot have contact with food.
We help you invent the future is a trademark of Dow Corning Corporation. Molykote is a registered trademark of Dow Corning Corporation.
Molykote ® Compressor And Vacuum Pump Oils Dec 6, 2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3002E-01 DIC173925 �2006, 2007 Dow Corning Corporation. All rights reserved.
SHIPPING LIMITATIONS None.
HEALTH AND ENVIRONMENTAL INFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
TYPICAL PROPERTIESSpecification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Molykote® brand Product NSF
S
tatu
s
ISO
Gra
de
Vis
cosi
ty @
4
0°C
, cSt
Vis
cosi
ty @
1
00°C
, cSt
Vis
cosi
ty @
1
00°F
, cSt
Vis
cosi
ty @
2
10°F
, cSt
Vis
cosi
ty
Inde
x
Fla
sh P
oint
, °F
Fire
Poi
nt,
°F
Pou
r Poi
nt,
°C
Spe
c G
rav
@
20°
C, g
/mL
Den
sity
@
20°
C, l
b/ga
l
Bas
e O
il
Add
itive
P
acka
ge
Air Compressor Oil L-1232FG Synthetic Compressor Oil H-1 32 30.2 5.7 33 5.8 138 465 515 -60 0.826 6.87 PAO R&O L-1232 Synthetic Compressor Oil H-2 32 30.1 5.7 32.9 5.8 144 470 520 -60 0.835 6.95 PAO R&O L-3232 Synthetic Compressor Oil H-2 32 39.3 7.9 42.7 8.1 178 510 575 -48 0.974 8.11 PAG/POE R&O L-0246 Compressor Oil H-2 46 46.6 6.8 51.7 7 100 440 450 -18 0.863 7.18 MO R&O L-1246FG Synthetic Compressor Oil H-1 46 47 7.9 51.6 8.1 138 475 525 -42 0.829 6.9 PAO R&O L-1246 Synthetic Compressor Oil H-2 46 44.2 7.7 48.5 7.8 138 515 535 -57 0.838 6.97 PAO R&O L-3246 Synthetic Compressor Oil H-2 46 48.2 9.4 52.4 9.6 183 525 540 -45 0.974 8.11 PAG/POE R&O L-4646 Synthetic High Temp Compressor Oil H-2 46 48.1 7.4 53.3 7.3 111 550 570 -42 0.947 7.88 POE R&O L-1268 Synthetic Compressor Oil H-2 68 62 9 60 9 121 520 580 -54 0.840 6.99 PAO R&O L-1210 Synthetic Compressor Oil H-2 100 98 14 108 14 145 520 550 -48 0.841 7 PAO R&O L-4610 Synthetic Blend Piston Compressor Oil H-2 100 91.7 11.1 103.4 11.4 101 500 520 -15 0.880 7.52 MO/DE R&O L-4611 Synthetic Reciprocating Compressor Oil 100 98 9.5 112 9.8 62 515 555 -28 0.960 8.03 DE R&O
Vacuum Pump OilL-1668FG Synthetic Blend Vacuum Pump Oil H-1 68 63.1 9 70 9.3 113 445 465 -18 0.856 7.12 PAO/MO R&O L-0610 Vacuum Pump Oil H-2 100 106.9 12.4 117.7 12.7 100 500 525 -18 0.867 7.22 MO R&O
Ammonia Compressor OilL-0660 Para Synthetic Ammonia Refrigeration Compressor Oil H-2 68 69 9 77 9 100 440 475 -39 0.87 7.24 MO PPD L-0668 Ammonia Refrigeration Compressor Oil H-2 68 63 6.7 65.4 6.9 59 345 360 -30 0.897 7.46 MO None
Special Purpose FluidsL-1605FG Synthetic Barrier Fluid H-1 5 5.3 2 5.6 2 124 320 345 -60 0.8 6.66 PAO None L-4640 Synthetic Compressor Flush Fluid H-2 32-46 38.6 5.7 42.4 5.8 65 445 520 -42 0.963 8.01 DE R&O L-0268 Process Gas Oil - 68 68 9 76 9 102 420 470 -33 0.848 7.06 MO C1L-1510 Process Gas Oil - 100 100 14 111 14 138 520 572 -30 0.838 6.97 PAO C1L-1568 Process Gas Oil - 68 68 10 75 10 140 516 567 -30 0.834 6.94 PAO C11Typical values; not for use in preparing specifications. 2The H-2 designation indicates the lubricated part cannot have contact with food. 3The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm. 4The oil date is also displayed in the Molykote® Hydraulic Oils Data Sheet.
��������
���*!��( @@���" *�����
���" *����� .�� !7� ��8����!��� �. 7�*7�% �!�����" !����(�������-�!7 (�!�� *����
������������� �� �� ���� �� ��� ��K���� � ���� �� � @ �������� ����� �� �� ��� ����� I �� ���� ����� ��� ������ �� �� ���� �� ��� ��K���� � ���� �� � @�������� ����� �� �� ��� ����
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,
������!���%& "����!%& '������!%
�"# $% &%& � � ��� ��� @ #�'"% --
"�) (%*+ !��,�� ������� ���%- .--�.*-
"�) (&%% �� �� � (-/ 01&/23 ���� -�6*
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23( ��(� *--
��()���!���
������� ��������� / �.- � 5%%-
/2 �.- � 5(*-
"�) (%+1 ���� ��� / %6-
/2 *+.
8��9��%.+&&- ��� ��������� ��:�� � � �*-/ 0�((/23
"���� ����,����� ��:�� #� %%(-;%-�*
���:�� ���� (- ���� ���� ��� #� ((-;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ��� ��.-/ 0�.-/23
���� *.-
���"��* ��)���!%& )��!��!��� �*����! -���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # *.--
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� -�6
8����!����� ������
)= ���� # %(---
����!����
�"# $% &-+ ��% !��� �� � ���@ ��� �������� �� %�6-
�"# $% &-& );����� �� � ���@ ��� ��� ���� %--�@66/ 0(%-/23
��� -�*
�����"��! ��.��(�!���
���������������
���$ ��
� B;������ ���� ����������� �������� E� � � � ������ ������ ��;��������� !��� ������� ��� � ����������� �� �;���� ��� ��� 0B�3�������
� B;������ ���� ��� ��� � �������������� �� ��������
� '��� ������� ���� ����� ��� ��� � ���� �� ��,��
�����������
� 9����� ���� ������ ���� ����� ������� � ���� �� �������� 8��� �� ��������� B� �������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��������� )��!��!���
�"# $% &-( �=2�B���� �����
������ �� ����� ��@ �� ���� %
%� #����� ��������� '��� � " ����(� �������� �� �� �� �� �� � ��� ��;����? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
����������� ���+�/ ��� ���� ������ � 8���� � ������� ��� � �� � ��� �@ ���� � ���� ������� ��������� � ��� ��� � �� � ������ �� ��������� � �� � �� � ��; ��� �������� � �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B ������ -- 2���� ���� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( ($�-%�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%($ �-% � (6.1 J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
MOLYKOTE® Longterm W 2High Performance Grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
White lubricating grease for metal/metal combinations with slow to fast movements and medium loads
Standard Unit Result
APPLICATION
• Used successfully for bearings in machinery used in the food and pharmaceutical industries, in textile and paper making machines, domestic appliances and mechanical precision instruments.
Color White
Consistency, density, viscosityNLGI consistency class 2DIN 51 818Worked penetration 265-295mm/10ISO 2137Density at 20°C 0.9g/mlISO 2811Base oil viscosity at 40°C 125mm²/sDIN 51 562
TemperatureService temperature -30 to 110
+130 for short periods°C
Drop point >=180°CISO 2176Low temperature torque test at -20°CASTM-
D-1478-80Initial break-away torque 125x10ª³NmTorque after 20 minutes running time 44x10ª³Nm
Load-carrying capacity, wear protection, service lifeFour-ball testerWeld load 2400NDIN 51 350 pt.4Wear scar under 800N load 1.4mmDIN 51 350 pt.5FAG roller element bearing tester FE 9, 1500/6000-110, F‡}
155hDIN 51821-02-A
SpeedDN value¹ 450000mm/min
Corrosion protectionSKF-Emcor methodDIN 51 802Degree of corrosion 0-1
Oil separation - evaporationOil bleeding, 24h, 100°C 3.3%Oil evaporation, 24h, 100°C 0.5%
1. DN values are calculated approximations and will vary widely with temperature, load and bearing type.
FEATURES
Good load-carrying capacity•
Suitable for long-term lubrication since it has no tendency to oxidize
•
Wear protection through solid lubricants
•
Good adhesion strength due to incorporated adhesion improver
•
Good corrosion protection (corrosion step 0-1 in the SKF-Emcor test)
•
Prevents the formation of frictional corrosion
•
COMPOSITION
Mineral oil•
Lithium soap•
Solid lubricants•
Adhesion improver•
HOW TO USE
How to apply
Clean the contact areas. Apply with brush, spatula, grease gun or automatic lubricating device. Can be used in central lubrication systems.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
05/01/1998
DC 2910Ref. no. 71-0147A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® M 55 PlusDispersion
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Black dispersion of solid lubricants in mineral oil.
Standard* Unit Result
APPLICATIONS
• Used successfully as an additive for mineral oils.
Color Black
Density, viscosityDensity at 20°C (68°F) 0.91g/mlISO 2811Viscosity 73.2s4 DIN 53 211
TemperatureService temperature Depends on the
lubricating oil used
°C
Load-carrying capacity, wear protectionFour-ball tester (VKA)Weld load 3000NDIN 51 350 pt.4Wear scar under 800N load 1.35mmDIN 51 350 pt.5
* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
FEATURES
Increases load carrying capacity•
Reduces friction and wear•
Reduces running noise•
Improves running-in•
Emergency running properties•
Prevents and reduces pitting in gears
•
COMPOSITION
Mineral oil•
Molybdenum disulphide•
Dispersant•
HOW TO USE
How to apply
Add to lubricating and gear oils in amounts of 5% by volume; 10% for particularly heavy stress. Not to be added to aqueous metalworking emulsions. Can be used in all lubrication systems, such as drip oilers, central lubricating systems, etc. Use undiluted to improve the operation of hot-boxes.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE,
PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C (68°F) in the original unopened containers, this product has a usable life of 18 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or
Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
11/12/2000
DC 3631Ref. no. 71-0149C-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
�������� � CC����" ��8�����! ���!�
����" ��8�����! )��!� -�!7 �������� ������� ���
������������� ������� ��� ��������� ��� ��� ��� � ������� ���� �� ��� ���� �������� ��K���� � ���� �� �;���� ��������� � 8 ��������� ����� (*-/ 0..1/23@ �� ������� �������F� ������ �������� � �� ����@ �� �� ������� ��� ����� ���� � ��� �,� ���� �� ��������� �� � 5.$-/ 05&.(/23�
� ������� ��� ��������� ��� �� � �� �� ������� �� ��� � �� � � ������� ��� �
� ��� ������ � � �� ���� ����� � ��������� �������� ��� �������� ������ ������ @ ���,� ����� ���� �� �� ���,� �� � �� �� � ���,� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,�����
����!��!���& "����!%& '������!%
"�) (%*+ I���,�� ������� ���%- (&-�**-
"�) (&%% �� �� � (-/ 01&/23 ���� %�6$
�"# $% $1( 4� � ��� �� �� �� � ($/ 0++/23 ��(� %($
��()���!���
������� ���������% / �.$ � 5(*- 0�� ����,�3�� � 5.$- 0���3
������� ���������% /2 �.6 � 5..1 0�� ����,�3�� � 5&.( 0���3
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # (---
%� ���������� �� � ��� �� ���� ������� �? �"#� ��� ��� "�� ��� #����"�)� "������� ������� ��� )���� ����
+�, �� $��+�- !� �))�% ��� �� ���� ���� �� ����� ������ �@ �����@ ���� � �� �� ���������������� ������� � �� � �� ������ ��������� � �� �
�����"��! ��.��(�!���
���������������
���$ ��
� �� � ��������� �� � 5(*-/ 05..1/23@��� ��������� �� � 5.$-/ 05&.(/23
� '��� ���� �� � ���� '��� �������F��� �������� � �������� ��� ��� ��� ����� ���� �� ��� �� 0� ��� �����������3
�����������
� �������������� ���;�� ���� ������ ���� 9�������� �� �������
+��/���� � ���$����������� ���� �������� ��:�������� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� *1 ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ��������� ������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � � �� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 9 ++ ����� ������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( %&�-*�(--* ��� ���� �� 9)�A=)�B ��� ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%&14�-% � (6*( J%66+�(--* ��� ���� ��������� 8�� ���� �� ������
SpecialtyLubricants Molykote® Microsize Powder
FEATURES Solid Lubricant
APPLICATIONS Molykote Microsize Powder can be used: � as a dry burnished (rubbed-on) lubricating film for metallic contacts � as a solid lubricant additive for self-lubricating plastics and sinter metal parts � as a solid lubricant additive in metalworking compounds � as run-in aid, in press-fittings, in heavy loads and slow speeds applications and also in
extreme environments (for example in dusty atmospheres or extremes of temperatures)
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Test Unit Result Color Black Consistency Free flowing powder Purity (MoS2 content) % 98 Particle size distribution (Laser Method µm 90 % <11.82 Malvern Mastersizer in 2-propanol) 50 % <5.22 10 % <1.97 Particle size (Fisher Method) µm 0.65 to 0.80 Service temperature range °C - 185 to +450 Service temperature range (in vacuum) °C Up to 1100 Theoretical density (solid state) g/cm³ 4.8 Bulk density (powder state) g/cm³ 0.5 Water/moisture content % 0.05 Almen Wieland machine OK load N > 20000 Press-Fit test µ 0.06
HOW TO USE Rub the powder thoroughly in different directions on degreased dry surfaces using a hard brush or window leather. Can be applied by rotary brush, felt or polishing disks. Small parts should preferably be tumble coated. Add to plastic elastomers and sinter metals before forming.
HANDLING PRECAUTIONSProduct safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
� Excellent lubricating properties
� Reduction of friction and wear
� Resistant to oxidation
� Extreme pressure resistance
� Wide service temperature range
COMPOSITION� Molybdenum disulphide
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 02/13/2008 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3362-01 �2008 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored at or below 20°C (68°F) in the original unopened bags, this product has a usable life of 60 months from the date of production.
PACKAGINGThis product is available in 1kg can and 25 pail.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
�������� �@@@����" ��8�����! )��!�
����" ��8�����! )��!� .�� 8��!�" (�!�� D���!�B ���!���� �� ���" �����A��
������������� ������� ��� ����� K�� �� ��� ��K���� � ���� ��������� �� �1$-/ 0%(-(/23 �� � ����� ��� ����� @ �� �����@ ���� � ������ �� ������� �������@ ���� � �� ��������� �� �� ������� " ����� � � ����� � ���� �� �� ����� @ ������ �� ���� ��������� �� ������ �� ��������� ��� ��� ����
� I �� ���� ����� ��� ������� ���� ��� @ �FF�� ���� ���� �� ��� �� �K���������� ������ @ ����� K�� � �� �������� ��� ��@ �� �� � ��� �� � ����� �� �������� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���
����!��!���& "����!%
"�) (%*+ I���,�� ������� ���%- (&-�*%-
"�) (&%% �� �� � (-/ 01&/23 ���� %�(1
��()���!���
������� ���������% / �18 to 1093
/2 �20 to 2000
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # .&--
�"# $% *$- ��$ !��� ��� ���� .--# ���� �� -�-&
8����!����� ������
)= ���� # (----
2������� ����� # (1--
���..�����! �. .���!���
����� � � N �����( -�%*
����� � � N ���� -�-&
"���� ����,����� ��:��* #� %*$
�"# $% &-( �=2�B���� ����� %
%� ���������� �� � ��� �� ���� ������� �(� �������� �� ������ � ����� ������@ 9%(@ &�&@ � ����,��� �������*� 9 %(@ ��� ���� ��:�� 9� O 1(#� �� ��� ����� � $.-/ 0%--./23@ (%�@ ����������� �� %�++-6�? "�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
�����"��! ��.��(�!���
High PerformanceLubricants
���$ ��
� � �� � �� ���� � ���� ���� �����������0�*-/ ��((/2 � 51$-/ �%(-(/23
� C��� ������������ �������� B���� ���� ������ �� �����@��� ���� ��� � � � ���� ���������
� �������� �� ������ ������� � ������ �� ����� ��� @ ��� ���� ������ ������������ �� ��� ��� ����� �
� '��� ����� �� �������
�����������
� ����� ������� � 9����� ���� ����,���� �������� ����
+�, �� $��+�- !� �))�%"� �� ����@ ���� �� ����� �� ����� ��� � ���� ��� �� ������ ����:��� ���� �� �� �� � � �������@ ���� �� � � ��� � ����� ����� � ���� ���� " ����� � � ������ �������� @ �� �� � �� � ����;�� ��� ���� � �� ��� �
�� ����� �� ������ � �� ����������� :���,�� �� ������ � ���������� @ � � ���� ���� � � � �� �������
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ������
����� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B %--- ����� ������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-(%& �-% � (6-6 J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
DOW CORNING® 111Silicone compound
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Parameter
Valve lubricant and sealant
Standard* Unit Value
APPLICATIONS
• Lubrication for control and pressure plug valves, water softener and faucet valves.
• Sealant for vacuum and pressure systems.
• Sealant for outdoor equipment (also shipboard) subject to washing and harsh environmental exposure: meters, electrical service entrance and underground connections.
• Damping medium for dash pots in electrical and electronic equipment.
• Chemical barrier coating.
• Used as an anti-stick and sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout.
• Rubber and plastic O-rings, gaskets and seals.
Physical nature Stiff compoundColor White to light
grey, translucentPenetration unworked 175 to 210mm/10ISO 2137Penetration, worked 60, max. 260mm/10ISO 2137Bleed 24 hours/200°C (392°F), max. 0.5%CTM 0033AEvaporation 24 hours/200°C (392°F), max.
2.0%CTM 0033A
Melting point None°C None°F
* CTM: Corporate Test Method, copies of CTMs are available on request.ISO: International Standardisation Organisation
FEATURES
Good resistance to most chemicals•
Wide service temperature range (-40°C/-40°F to 200°C/392°F)
•
Low vapor pressure•
Low volatility•
Excellent water resistance•
COMPOSITION
Silicone oil•
Inorganic thickener•
Additives•
HOW TO USE
How to apply
DOW CORNING 111 Silicone Compound can be applied by hand, specially designed automated equipment, brushing or wiping. Certain designs of grease guns may seize up; test prior to use.
A thinner consistency can be achieved
by dispersing in solvents such as xylene, mineral spirits and methyl ethyl ketone. DOW CORNING 111 Silicone Compound can then be applied by brushing, dipping or spraying.
DOW CORNING 111 Silicone Compound should not be applied to any surface which will be painted or finished. Such coatings may not
adhere to the silicone-treated surface. If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting.
Solubility
DOW CORNING 111 Silicone Compound is insoluble in water, methanol, ethanol, or mineral oil, and soluble in Chlorothene NU®*, perchloroethylene, mineral spirits and methyl ethyl ketone. The greater the consistency (lower penetration value), the lower the solubility of the specific silicone compound. The suitability of the particular solvent should be based on testing prior to regular use. Flammability and toxicological properties should be important considerations in the choice of a solvent.
Chemical resistance
DOW CORNING 111 Silicone Compound is not greatly affected by mineral oils, vegetable oils or air. It is generally resistant to dilute acids and alkalines, and to most aqueous solutions.
DOW CORNING 111 Silicone Compound is quite resistant to a wide variety of organic and inorganic chemicals. Because each application may vary in chemical composition, pressure, flow velocity, relubrication requirements and equipment design, it is recommended that the silicone compound be tested before adopting for regular use.
DOW CORNING 111 Silicone Compound is not to be used with liquid oxygen and should not be used in applications requiring LOX compatibility.
HANDLING PRECAUTIONS
DOW CORNING 111 Silicone Compound may cause temporary discomfort when in direct contact with eyes. In case of eye contact, flush eyes with water.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED.
BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C (68°F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
*® Chlorothene NU is a registered trademark of the Dow Chemical Company.
©1997-2001 Dow Corning Corporation. All rights reserved.
19/11/1998
DC 3666Ref. no. 22-1087C-01
2 ® DOW CORNING is a registered trademark of Dow Corning Corporation.
MOLYKOTE® 1122Chain and open gear grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Synthetic grease with solid lubricants
Standard* Unit Result
APPLICATIONS
• Used for initial lubrication of chains with hollow pins equipped with grease nipples. e.g. high tenter clamp chains in the textile industry and conveyor chains in food sterilizer units.
• Also used for gear drives and open gears, sliding bearings operating at low speeds and high temperatures, such as bearings in drying systems and calendaring machines used in various industrial processes.
Color Black
TemperatureService temperature range 10 to 160°CUnworked penetration 250-280
Load-carrying capacity, wear protection, service lifeFour-ball tester (VKA)Wear scar under 600N load 0.9mmDIN 51 350 pt.5Weld load 2600NDIN 51 350 pt.4Almen Wieland machine OK load 18000N
Density, viscosityDensity at 20°C 0.95g/mlBase oil viscosity at 40°C 1500mm²/s
* DIN: Deutsche Industrie Norm
FEATURES
Emergency lubrication•
High pressure resistance•
High wear protection•
Extremely adhesive•
Resistance against water•
COMPOSITION
Synthetic oil•
Solid lubricants•
Inorganic thickener•
Adhesion improver•
HOW TO USE
How to apply
Clean the contact areas. As is usual with lubricating greases, apply by means of a brush, spatula, grease-gun or automatic lubrication device.
Chains with hollow pins
The hollow pins should be completely packed with grease. Relubricate through grease nipples using a grease gun. DOW CORNING 1122 Chain and Open Gear Grease is effective to 160°C under these conditions.
Gears
The tooth profiles of new gears should be treated with DOW CORNING® G-n Metal assembly paste or spray and run without load for a short time to generate a basic solid lubricating film. The gears should then be lubricated with DOW CORNING 1122 Chain and Open Gear Grease in accordance with the gear manufacturer's instructions.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers MOLYKOTE 1122 Chain and Open Gear Grease has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this
information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
06/11/1998
DC 3723Ref. no. 71-0303A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
Product InformationRelease Agents
FEATURES• Complies with FDA regulations for
incidental food contact; complieswith FDA 21 CFR 175.300
• Remains stable over a widetemperature range
COMPOSITION• Heat-stable silicone compound
Dow Corning® 316Silicone Release Spray
Release agent and lubricant for many food and industrialapplications
APPLICATIONSFor food and beverage industry processing:• Reduces build-up on heat seal bars, resulting in increased heat transmission and
sealing speed; reduced package discoloration; reduced cleaning time• Releases evaporated milk and powdered milk from evaporator and preheater
tubes• Reduces adhesion of residues on heating coils and cooking kettles• Lubricates sliding doors on display cases, refrigerator and freezer door gaskets• Helps prevent seizing and jam-ups of conveyor guide rails and scrambler tables• Facilitates the release of frozen vegetables and fruits from tray and freezer
filling spouts• Reduces adhesion of dried foods (dates, tea cubes, etc.) to drying trays and
large cheese wheels to storage shelves• Hastens the removal of dried food from stove burners and ovens; helps prevent
adhesion of grease; makes cleaning stainless steel fixtures and counter topseasier
• Helps prevent glasses from sticking to cooling cones of glass frostingequipment
• Helps sugar release from processing and packaging equipment such as guides,dispensing chutes, table tops, and drying trays
In high-speed rotary letterpress printing:• Increases metal release from tail sheets• Allows saw blades, saw tables, and storage trays to work more smoothly• Reduces sticking of conveyors, pulleys, and valves
In the bindery industry:• Reduces build-up on glue pots and paste jars• Makes tables and cutter surfaces slippery, so paper magazines, books, and
bundled newspapers can be handled easiercontinued on next page
TYPICAL PROPERTIESSpecification Writers: Please contact your local Dow Corning sales office or your GlobalDow Corning Connection before writing specifications on this product.
Test Unit ResultColor ClearDrying time minutes Approx. 3Flash Point (Bulk) °C (°F) 42 (108)Density (Bulk), at 25°C (77°F) g/mL 0.75
For flexography applications:• Helps prevent ink from creeping
onto idle rollers used in printinggift wrap, multi-wall bags, andsimilar applications
In addition to specific industry-relateduses, Dow Corning® 316 SiliconeRelease Spray also:• Helps prevent glue from adhering
to walls of containers; makes iteasier to remove dried glue fromequipment
• Lubricates dispensing valves,package and coil chutes ofautomatic vending machines
• Promotes removal of hosiery fromboarding forms
• Makes ironing easier by reducingfriction on hand irons and pressingequipment
• Provides for smooth, easy cuttingand reduces binding when appliedto the cutting edges of tools;reduces clogging of saw teeth whensawing gummy woods ornonferrous metals
• Provides for smoother, fastermaterials handling on chutes,tables, and rollers
DESCRIPTIONDow Corning 316 Silicone ReleaseSpray is a heat-stable, silicone anti-stick agent. Effective in solving awide range of sticking or adhesion
problems, it can be used in manyindustries.
The silicone film formed byDow Corning 316 Silicone ReleaseSpray resists breakdown due to oxida-tion, which can leave carbonaceousresidues or gummy surfaces. Oncedried, it has low volatility at tempera-tures up to 199°C (390°F).
HOW TO USEDow Corning 316 Silicone ReleaseSpray should be applied to cleansurfaces. Clean off any surface residuewith a fine emery cloth or scouringpowder until the surface is shiny; thenwipe with a clean cloth moistened withsolvent to remove dirt and abrasiveparticles.
Methods of application vary, dependingupon the size, accessibility, and com-plexity of the unit to be processed orpackaged. Usually, Dow Corning 316Silicone Release Spray is sprayed in alight film.
Approximately three minutes dryingtime should be allowed. Dow Corning316 Silicone Release Spray can alsobe buffed onto metal surfaces with ahand buffer. Only a thin film is neededfor effective release. This film shouldbe restored as required.
Freshly cleaned heat-sealing units,such as irons and bars, should bebroken in at full operating temperaturefor a short period after applyingDow Corning 316 Silicone ReleaseSpray. After any excess has beenwiped off, the unit is ready for use.
NOTE: Because Dow Corning 316Silicone Release Spray has such awide range of uses, securing orincluding complete information onthose uses, such as reapplicationschedules and amount to use, is imprac-tical. For this reason, the suitability ofDow Corning 316 Silicone ReleaseSpray should always be tested beforeit is adopted for regular use.
SolubilityDow Corning 316 Silicone ReleaseSpray is insoluble in water, ethanol,acetone, glycol, and glycerin. It can bedispersed in naphtha.
NOTE: When using any solvent,always provide adequate ventilation.Follow precautions on solventcontainer label.
CAUTIONDow Corning 316 Silicone ReleaseSpray should not be applied tosurfaces that will later be painted,since it may interfere with theadhesion of the paint.
FDA/USDA STATUSDow Corning 316 Silicone ReleaseSpray complies with FDA 21 CFR175.300 covering resinous and poly-meric coatings, subject to end usercompliance with applicable total extrac-tives limitations. It is also acceptablefor use in federally inspected meat andpoultry plants (previously designatedby USDA H-1 status).
HANDLING PRECAUTIONSThis product contains a flammablesolvent. Do not spray in a confinedspace where the possibility of sparkignition exists. This or similar situa-tions could result in a flammabilityhazard.
PRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED IN THIS DOCUMENT.BEFORE HANDLING, READPRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESENTATIVE,OR DISTRIBUTOR, OR BY CALLINGYOUR GLOBAL DOW CORNINGCONNECTION.
USABLE LIFE ANDSTORAGEWhen stored at or below 35°C (95°F),Dow Corning 316 Silicone ReleaseSpray has a shelf life of 60 monthsfrom date of manufacture. Refer toproduct packaging for “Use By” date.
PACKAGINGDow Corning 316 Silicone ReleaseSpray is supplied in 284-g (10-oz)aerosol cans, 454-g (16-oz) pump spraycontainers, and 14.1-kg (5-gal) pails.
LIMITATIONSThis product is neither tested norrepresented as suitable for medical orpharmaceutical uses.
SHIPPING LIMITATIONSDOT Classification: Dow Corning 316Silicone Release – Combustible liquid;Dow Corning 316 Silicone ReleaseSpray – Flammable gas.
WARRANTYINFORMATIONThe information contained herein isoffered in good faith and is believed tobe accurate. However, because
conditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fullysatisfactory for the intended end use.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment. Your exclusive remedyfor breach of such warranty is limitedto refund of purchase price orreplacement of any product shown tobe other than as warranted. DowCorning specifically disclaims anyother express or implied warranty offitness for a particular purpose ormerchantability. Unless Dow Corningprovides you with a specific, dulysigned endorsement of fitness for use,Dow Corning disclaims liability forany incidental or consequentialdamages. Suggestions of use shall notbe taken as inducements to infringeany patent.
Printed in USA Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 10-729A-01 AGP4934 ©1997, 2000 Dow Corning Corporation. All rights reserved.
Product InformationLubricants
FEATURES• Provides high-temperature
lubrication from 350 to 1000°F(177 to 538°C)
• Gives off little smoke orobjectionable odors when usedin proper amounts
• Designed to lubricate in lightlyto moderately loaded conditions
• Does not build up carbondeposits as readily as mostconventional petroleum chainlubricants
• Frequently softens hard carbon-aceous deposits caked on frompreviously used hydrocarbonlubricants
• Can be applied manually or withautomatic lubrication systems
COMPOSITION• A stable dispersion of microscopic
graphite particles in a polyalkyl-ene glycol carrier fluid
• Supplied as low-viscosity fluid• Forms solid lubricant film after
fluid evaporation
Dow Corning ® C-40 HighTemperature Chain Lubricant
Lubricant for bearings and chains exposed to hightemperatures
USESDow Corning® C-40 High Temperature Chain Lubricant has been used on avariety of high-temperature lubrication applications, including:• Oven chains lubricates in a variety of high-temperature ovens,
including heat treating, paint drying, lithographing and gypsumwallboard drying ovens
• Conveyors lubricates chains, roller bearings and ball bearings in high-temperature paint-drying tunnels, paperboard driers and heat-treatingovens
• Bearings lubricates oven cart and brick kiln car bearings
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
Method Test Unit ResultColor BlackDensity at 77°F (25°C) lb/gal 8.3
ASTM D 88 Viscosity100°F (38°C) SUS 650210°F (99°C) SUS 105
ASTM D 92 Flash Point °F (°C) 450 (232)ASTM D 97 Pour Point °F (°C) -20 (-29)Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for thisproduct and use it as a basis for your specifications. It may be obtained from any Dow CorningSales Office, or from Dow Corning Customer Service in Midland, MI. Call (517) 496-6000.
HOW TO USEDow Corning C-40 High TemperatureChain Lubricant can be used assupplied and requires no stirring. Itcan be applied manually by brushor hand oiling, as well as with suchautomatic lubrication equipment asdrop-feed, wick, brush and oil-mistsystems. Amount supplied may beadjusted to avoid smoking.
For best results, it should beapplied to surfaces under 250°F(121°C). Best operating conditions,however, are over 350°F (177°C) at
which point the polyalkylene glycol iscleanly volatized from the surface.Continuous operation between 250and 350°F (121 and 177°C) may causegumming.
AUTHORIZATIONSDow Corning C-40 High TemperatureChain Lubricant meets the require-ments of USDA H-2.
PACKAGINGDow Corning C-40 High TemperatureChain Lubricant is supplied in 1-quart, 5-gal and 55-gal (2-, 40- and450-lb) containers, net weight.
Printed in USA Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 10-746-99 AGP4480 ©1997, 1999 Dow Corning Corporation. All rights reserved.
STORAGE AND SHELF LIFEWhen stored at or below 90°F (32°C),Dow Corning C-40 High TemperatureChain Lubricant has a shelf life of60 months from date of manu-facture. Refer to product packagingfor Use By date.
USE LIMITATIONSThis product is neither tested norrepresented as suitable for medicalor pharmaceutical uses.
SHIPPING LIMITATIONSNone.
SAFE HANDLINGINFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS AND CON-TAINER LABELS FOR SAFE USE,PHYSICAL AND HEALTH HAZARDINFORMATION. THE MATERIALSAFETY DATA SHEET IS AVAILABLEFROM YOUR DOW CORNINGREPRESENTATIVE, OR DISTRI-BUTOR, OR BY WRITING TODOW CORNING CUSTOMERSERVICE, OR BY CALLING (517)496-6000.
A worker fills the reservoir of anautomatic oiler designed to apply oneshot of Dow Corning C-40 HighTemperature Chain Lubricant to eachconveyor bearing as it passes under-neath. The oil’s glycol carrier evapo-rates in a 530° F (277° C) bake ovenwithout leaving a residue. Thegraphite constituent of the lubricantremains to keep the bearings rollingfreely.
WARRANTY INFORMATION PLEASE READ CAREFULLY
The information contained hereinis offered in good faith and isbelieved to be accurate. However,because conditions and methods ofuse of our products are beyond ourcontrol, this information shouldnot be used in substitution forcustomer’s tests to ensure thatDow Corning’s products are safe,effective, and fully satisfactory forthe intended end use.
Dow Corning’s sole warranty isthat the product will meet theDow Corning sales specifications ineffect at the time of shipment. Yourexclusive remedy for breach of suchwarranty is limited to refund of pur-chase price or replacement of anyproduct shown to be other than aswarranted. Dow Corning specificallydisclaims any other express orimplied warranty of fitness for aparticular purpose or merchantabil-ity. Unless Dow Corning providesyou with a specific, duly signedendorsement of fitness for use,Dow Corning disclaims liability forany incidental or consequentialdamages. Suggestions of use shallnot be taken as inducements toinfringe any patent.
AV00
823
��������
���C=<� �������!�
��))�� )��!� .�� ��()����!� ��8D��!�" !� 7�*7 !�()���!����&7�*7 )�������� ��" �������'� ��.�������
������������� !��� ���� ��� ��� ���� ����� ��� � �� ������� ���� ����@ ��� ������� ��@ ���� ���,� ������ � @ ����� ��� @ �;��� �� ��� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� ����� �������
������!���%& "����!%& '������!%
"�) (%*+ I���,�� ������� ���%- *(-�*+-
�"# $* (%+ �� �� � (-/ 01&/23 ���� %�-
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23 ��(� %%--
��()���!���
������� ��������� / �*- � 51$-D �� ��������� � 5*--
/2 �(( � 5%(-(D paste
�������� � 5$+(
"�) (%+1 ���� ��� / #��
/2 #��
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # ($--
�"# $% *$- ��$ !��� ����� ���� &--# ���� �� %�-
8����!����� ������
)= ���� # 7(----
���..�����! �. .���!���
��� �2� � N O -�-+
����� � �
�������� �� ������ �� ��� ������9%(@ &�&@ ����,��� ������
� N ����� -�%+
� N ���� -�%-
"���� ����,����� ��:��09%( ��� ���� ��:�� 9�O&-#� ����� ����� � *--/ �$+(/2@ (%�@ ����������� .$@ &�&@ ����� %�-$-*3
#� %%-
�����"��! ��.��(�!���
High PerformanceLubricants
���$ ��
� !��� ������ ��������� ����� '��� ��� ��� �� � ���� <��� ���� ��� �� �� � � ���� ������ ����
� '��� ����� �� �������� ��� ���������� #� ���� ���
�����������
� �������� ������� ����� ����� ���� "������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
�"# $% &-+ ��% !��� �� � ���@ ���@ �������� 1 @ 90ºC
��������� )��!��!���
�"# $( &-( �=2�B���� �����
������ �� ����� �� -
+�, �� $��+�- !� �))�%"� �� ����@ ���� ������ ����� ��������� ��� ����� �� � ��� � ��� ��� ����� B;�� ������� ��� � ���������� 9)�A=)�B ��+.*6 ��� �� � �� �� � �� � ���� � �� �������� �� ��������� � �� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B ��+.*6 ��� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%&(f�-% � *1(( J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
MOLYKOTE® D 321 RAnti-friction Coating
High Performance
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• For metal/metal combinations with slow to medium fast movements and high loads.
• Suitable for the permanent lubrication of highly stressed sliding guides with low sliding speeds, oscillating movements or intermittent operation.
• Improving the running-in process and for lubrication under high vacuum and at extreme temperatures.
• Used successfully for cylinder-head bolts, toaster guides, car mirror adjustment mechanisms, high voltage switches, for the running-in of highly stressed gear wheel.
• Emergency lubricant for parts of the rotor head of wind energy installations and for groove-free cold extrusion of steel.
Color Grey-black
Physical propertiesViscosity at 20°C (DIN3 cup) sDIN 53211/3Density at 20°C 1.07g/mlDIN 53217/2Nonvolatile content 29%CTM 0242 IStorage life 24months
TemperatureCuring time 5/23min/°CService temperature range -180 to +450°C
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ b =4500
p=12500s=6800
NASTM-D2625
LFW-1, rotating¹ b = 212ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutes
p=146
no. of revolutions x1000 to μ=0.1 s=306LFW-1, oscillating¹ b = 178ASTM-D2714F=900N, frequency=89.5osc./minutes p = 400no. of oscillations to μ=0.08 s = 362
FEATURES
Air drying•
Avoidance of stick-slip•
High ageing resistance•
COMPOSITION
Solid lubricants•
Solvents•
Binder•
TYPICAL PROPERTIES (continued)
TestStandard* Unit Result
Coefficient of frictionPress-Fit test, μ = 0.075
1. Surface pretreatment: b = blank, p = phosphated, s = sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE D 321 R Anti-Friction Coating. Phosphatization or sandblasting (180 grit) increases the adhesion and service life.
How to apply
Stir the Anti-Friction Coating thoroughly before applying by spraying or brushing.
Recommended dry film thickness:5 to 20μm.
Curing
5 minutes at 23ºC
Solubility
Thinning can be carried out using MOLYKOTE® L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, MOLYKOTE D 321 R Anti-Friction Coating has a usable life of 24 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as
warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
13/11/1998
DC 2904Ref. no. 71-0219A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
�������� ����!�
� 7�*7����"97�*7�-��� "���8���!% )��!� 8���" �� � �%�!7�!�� ���&"�'���)�" �)���.�����% .�� )���!�� ��()����!�
������������� 8�������� @ ��������� �������� @ ����� �� �:�����@ ����� �:�����@ �������� �:����� �� ���� ��� �� ��� �
� � �� � �� ��� ��� �������� ��@ �����������@ �� ��� ��������� ��������� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ����(�!�� $��! 1����
8�������� ���� ������
L"� = (((- ������� 0���,�� 1- ��� 3 ���%- (&-
#�'" ��� (
������� ��������� ���� / �$- � %$-
�� �� ����* %�%&
L"� = (((- 4���� 0%--/ (. ���� 3 > %�-
L"� = (((- B�������� 066/ (( ���� 3 > -�(
L"� = (((- ����� ����� �� 0%--/ (. ���� 3 %�
8��9 � ($61 2��� ���� ���� ���� 0%$--����%����3 # $$--
8��9 � ((11 2��� ���� ���� ��� 0%+.-���@ *6(#@ % ����3 �� -�$-
�2!�% ����������� ���� �
I ���� ���� 06-/@ (+--#@ +$���@ E�1-3 ���� 7(-@---
�������� �� ������ 0���� 1--- ����� 3 -�-&
L"� = (((- ��� ��������� ��:�� � 0�.-/ 3
����� ��:�� #�� (.�$
E��� ��:�� #�� 1
��������� � ��� ������ ��� �� 0��� ��� � � 1-/ @ $-- ���� 3
84� E� � #� ����, ���� ��������
����������� �� � #� ����, ���� ��������
#��� �� � #� ����, ���� ��������
��������� �� � #� ����, ���� ��������
?L"�� L���� � "�� ���� �������8��9� 8������ ������ ��� �� �� �� 9������ �
�����"��! ��.��(�!���
���������������
���$ ��
� �������� ���� ������� ��������� ������ �� � ���
� I � � ����� ��� �� �@ � �� � ��������� �� ������ ���������
� �������� ��� �� ��� �� � C� � ��� ���� ���� ���������������
� ��� � ���� ������ ������������� ������� ��� ���� ����������
�����������
� ������������� ������� ���� �������
+�, �� $�� ��� ��� �� ���������� 8 � � ������ ��������� ���� � @ ����� �� ������ ��� �� � ��� �@ �����@ ��������� ��������� �������
+��/���� � ���$�������� ������ ��� ������ �� ,� ����� � !��� ���� �:����� � ��� ��� ��� ������ �� �������" �� ��� �� ���� ��� ,� ����� @ ���������� �� � ������������ ���� �� ��, ������� ���� ����� ���� !� � ��� ��������� ����������� 8 ���� ��������� ��;�� �� (--/ @ �� ����,��� ����������� ������� �� ��� � ������� � �� � ���� ���� �� �;�� �� �B ��� ���:��� ��������
$��0�� ��� ��/��� ���!�� ����@ ������ � � ����@ ���,����� �� ������@ �� � � ���� ���� ��*1 ��� ���� �� ��� �� ���������
������������ ������ � ��������� � %,� �� 0%- �� ��� �3 �� (-,� ���� �
8I�")#
%� ��� ������� � �� ������ ���������� ����� @ � ��������������� � 8� ��������� ��� �� ������ ���� � �� ������ ��������� �;����� � ������� ��������������� � ������ ���������@��������� @ �� ���� ������ � ��(� #� ������� ��� ���� �� ����������� �� ������ � �� ��������� ���� ���� �������� �� ������*� ��� ������ �� ��������� ������ ���� � �@ �� � � ����� ���� � � ������� �:�����@������������� ������ @ ���.� 4� ��� � ���� �� ������� ������� ��� 09���3 �� ������ �������� �� ������ ������ � ��$� ��� ��� ���� 8 ��@ ���@������ ���������� �� ��� ���� �� �������
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B B �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -$�-+�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� &-�*%--�-% %11-& J(--( ��� ���� ��������� 8�� ���� �� ������
Product Information
Specialty
Lubricants Molykote®
G-0050 FG/G-0051FG/G-0052FGWhite E.P. Bearing Grease
FEATURES Multi purpose food grade grease
APPLICATIONS Multi purpose lubrication of mechanical components such as bearings, chains, gears and
slides in food and beverage processing facilities.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales office or your Global Dow Corning
Connection before writing specifications on this product.
Test Property Unit G-0050 G-0051 G-0052
Color White White White
DIN 51
818
NLGI Consistency 0 1 2
ASTM
D217
Penetration mm/
10
370 325 280
ISO
2811
Density at 20ºC g/ml 0.89 0.89 0.89
ASTM
D 445
Viscosity @ 40ºC cst 70 70 115
Service temperature ºC
ºF
-17 to +150
0 to +302
-17 to +150
0 to +302
-12 to +150
0 to +302
ASTM
D2265
Drop point ºC
ºF
216
420
232
450
246 475
ASTM
D2596
Four-ball weld load N 2940 2940 2940
ASTM
D2266
Four-ball wear scar mm 0.8 0.8 0.8
ASTM
D1264
Water wash-out, 175ºF % 15 10 8
Fed 791 Oil bleed, 24 hrs @ 100ºC % 5 3 3
Fed 791 Oil evaporation, 24 hrs @
100ºC
% 2.0 2.0 2.0
ASTM: American Society for Testing and Materials ISO: International Standardization Organization DIN: Deutsche Industrie Norm
HOW TO USE Clean points of contact. Molykote®
White E.P. Bearing Grease can be
applied by hand packing, hand
operated grease gun, automatic
greasing systems and central
lubricating systems. When lubricating
antifriction bearings, follow the
bearing manufacturers instructions.
For plain bearings the new grease
should be pumped in until old grease
is flushed from system.
Excellent lubricating properties
Good resistance to water washout
High load carrying capacity
Compatible with many plastics or elastomers
Meets FDA Regulation 21 CFR 178.3570 and H1 classification for incidental food contact
Available in NLGI consistency class 0, 1 and 2
COMPOSITION
Mineral oil
Aluminum complex thickener
EP/AW additives
01/18/2005 Dow Corning is a registered trademark of Dow Corning Corporation.
Ref. No. 80-3254A-01 2002 Dow Corning Corporation. All rights reserved.
DESCRIPTIONMolykote® White E.P. Bearing
Greases are high performance
lubricants designed for the food and
beverage industry. They are a mineral
based lubricant thickened with
aluminum complex and fortified with
EP additives. Applications include
bearings, gears, chains and sliding
mechanisms in manufacturing
processes. They are an excellent
choice where NSF H1 status lubricant
is required or when the product must
be free of black particle contamination.
HANDLING PRECAUTOINS Product safety information required for
safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com.
USABLE LIFE AND
STORAGE When stored at or below 32°C (90°F)
in the original unopened container, this
product has a usable life of 60 months
from date of production
PACKAGINGThis product is available in cartridges,
pails and drums.
LIMITATIONS This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATIONTo support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLY The information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Suggestions of use shall not be taken
as inducements to infringe any patent.
Dow Corning's sole warranty is that
the product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THE
FUTURE.™
www.dowcorning.com
Information AboutMolykote® G-4500Multi-PurposeSynthetic Grease andMolykote® G-4700Extreme PressureSynthetic Grease
TypeSynthetic lubricants
Physical FormGreases, NLGI #2
Special FeaturesMulti-purpose capabilities; widetemperature operating range;broad compatibility
Primary UseLong-term lubrication forassembly and maintenance
DESCRIPTIONMolykote® G-4500 Multi-PurposeSynthetic Grease and Molykote®
G-4700 Extreme Pressure SyntheticGrease are new specialty lubricantsthat combine the benefits of wideoperating temperatures and broadcompatibility with varied materials.
BENEFITSBoth Molykote G-4500 Multi-PurposeSynthetic Grease and Molykote G-4700Extreme Pressure Synthetic Grease:• Are formulated to provide higher
load carrying capacity, greater wearresistance and longer service lifecompared with conventionalpetroleum-based lubricants
• Are NLGI #2 greases• Provide good compatibility with
most industrial and engineeringsubstrates including many plasticand rubber materials
• Excellent low temperature torqueand water washout resistance
Molykote G-4500 Multi-PurposeSynthetic Grease features:• A unique formulation that includes
polyalphaolefin (PAO) base oil,aluminum complex thickener andpolytetrafluoroethylene (PTFE) aswell as other fortifiers
• Meets FDA Regulation 21 CFR1789.3570 as a lubricant withincidental food contact
Molykote G-4700 Extreme PressureSynthetic Grease features:• A unique formulation that includes
polyalphaolefin (PAO) base oil,lithium complex thickener,molybdenum disulfide (MoS2) andother fortifiers
• Designed to handle extreme loadsand applications involving vibrationand/or shock loading
• Listed by Cincinnati Machine as anapproved lubricant to their P-64specification
USESBoth greases can be used with rollingelement and plain bearings, pivotpins, cams, guides, ways, drive screws,gears, splines and other machineelements.
Molykote G-4500 Multi-PurposeSynthetic Grease can be used in food-processing applications involvingmixers, motors, conveyors, low-temperature equipment, packagingmachines and many other applicationsin or out of the food processingindustry where a white grease may bedesirable. Such applications mayinvolve furniture, instrumentation,photo and optical equipment.Molykote G-4700 Extreme PressureSynthetic Grease can be used in mostnon-food related grease applicationssuch as metal working machines,motors, fans, blowers, conveyors, wheelbearings and custom machinery whereheavy duty, long-lasting lubrication isdesired.
LIMITATIONSThese products are neither tested norrepresented as suitable for medical orpharmaceutical uses.
AUTHORIZATIONSMolykote G-4500 Multi-PurposeSynthetic Grease complies with FDARegulation 21 CFR 178.3570 as alubricant with incidental food contact.Molykote G-4700 Extreme PressureSynthetic Grease meets Cinncinnati
Table I: Material Compatibility1
Elastomers ........................ CompatibilityButyl .................................. GoodUrethane ............................ ExcellentNeoprene ........................... ExcellentEPDM ............................... FairSBR .................................... GoodNitrile ................................. ExcellentNatural Rubber .................. PoorSilicone ............................... GoodViton ®2 ................................ Excellent
PlasticsABS .................................... ExcellentPPO (polypropylene
oxide) ............................ ExcellentNylon ................................. ExcellentPBT.................................... ExcellentPTFE resin ........................ Excellent1Compatibility rating for elastomers is based onrelative percent change in volume after 70 hours at70°C (158°F). Compatibility rating for plastics isbased on relative percent change in volume after 70hours at 70°C (158°F).
2Viton is a registered trademark of E.I. du Pont deNemours Company.
P R O D U C T I N F O R M A T I O N
TYPICAL PROPERTIES1
These values are not intended for use in preparing specifications.
Molykote G-4500 Molykote G-4700Multi-Purpose Extreme Pressure
Synthetic Grease Synthetic GreaseASTM D 445 Base Oil Viscosity,
at 104°F (40°C), cSt .............................................................. 110 150at 212°F (100°C), cSt ............................................................ 13.5 20
Thickener Type ......................................................................... Aluminum Complex Lithium ComplexASTM D 217 Penetration at 77°F (25°C), mm/10 (W/60) ............................... 265-295 265-295
Specific Gravity at 77°F (25°C) ................................................ 0.84 0.87ASTM D 2265 Dropping Point, °F (°C), min .................................................... 520 (271) 545 (285)FTM 321.1 Bleed/Evaporation, 24 hours at 212°F (100°C) ......................... 3.1/0.4 2.5/0.2ASTM D 4693 Low Temperature Torque at -40°F (-40°C), Nm ...................... 0.9 1.1ASTM D 2266 Four Ball Wear, 40 kg, 1200 rpm, mm ....................................... 0.50 0.32ASTM D 2596 Four Ball EP, Weld Load, kg, min .............................................. 315 400ASTM D 2509 Timken OK Load, lb, min .......................................................... 40 60
Temperature Range, estimated, °F (°C) ..................................... -60 to 325 (-51 to 163) -40 to 350 (-40 to 177)Dn, bearing ID (mm) × rpm, estimated ...................................... 325,000 350,000
1Note: These are preliminary figures based on initial test results.
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis foryour specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland,MI. Call (989) 496-6000.
Machine P-64, Ford ESA-MIC75-B, GM998525H and NLGI GC-LB.
HOW TO USEApply using conventional greaseapplication methods, i.e., clean brush,grease gun and manual or automateddispensing equipment.
SHIPPING LIMITATIONSNone.
STORAGE AND SHELF LIFEMolykote G-4500 Multi-PurposeSynthetic Grease and Molykote G-4700Extreme Pressure Synthetic Grease havea shelf life of 60 months from date ofmanufacture.
PACKAGINGMolykote G-4500 Multi-PurposeSynthetic Grease and Molykote G-4700Extreme Pressure Synthetic Grease isavailable in 3-oz (85-g) tubes, 14.1-oz(400-g) cartridges, 35.3-lb (16-kg)pails and 397-lb (180-kg) drums.Molykote G-4500 Multi-PurposeSynthetic Grease is also available in an11 oz. aerosol can.
SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS AND CON-TAINER LABELS FOR SAFE USE,PHYSICAL AND HEALTH HAZARDINFORMATION. THE MATERIALSAFETY DATA SHEET IS AVAILABLEFROM YOUR DOW CORNING REP-RESENTATIVE, OR DISTRIBUTOR, ORBY WRITING TO DOW CORNINGCUSTOMER SERVICE, OR BYCALLING (989) 496-6000.
LIMITED WARRANTYINFORMATION - PLEASE READCAREFULLYThe information contained herein isoffered in good faith and is believed tobe accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s products aresafe, effective, and fully satisfactory forthe intended end use. Suggestions of
use shall not be taken as inducements toinfringe any patent.Dow Corning’s sole warranty is that theproduct will meet the Dow Corning salesspecifications in effect at the time ofshipment.Your exclusive remedy for breach ofsuch warranty is limited to refund ofpurchase price or replacement of anyproduct shown to be other than aswarranted.DOW CORNING SPECIFICALLYDISCLAIMS ANY OTHER EXPRESSOR IMPLIED WARRANTY OFFITNESS FOR A PARTICULARPURPOSE OR MERCHANTABILITY.DOW CORNING DISCLAIMSLIABILITY FOR ANY INCIDENTALOR CONSEQUENTIAL DAMAGES.WE HELP YOU INVENT THEFUTURE.™
www.dowcorning.com
03/11/02 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.Ref. No. 10-887A-01 FPH29501 ©2002 Dow Corning Corporation. All rights reserved.
�������� ��� ��$�����" ��8�����! ���!�
����" ��8�����! )��!� .�� !7� ����(8�% ��" ������*��� �. (�!����()����!�
������������� ��� ��� �������� �� ��� ��� �� ������ ����� @ � � ������ ���������� �� ������ �� �������;� �
� ������ ��������� �� ������ ����� �� ��� ����� ��� ������ �� �������� �� � ��� �������@ ���� �� ����� �����
� I �� ���� ����� ��� ��������� ������� ����� @ ����� ��� @ ����� ���� @���� �� �� �� �� ���� @ ���� @ ����� @ ���� @ ���������� ����� ���� � ��� �� ������ �� ���� �� ������ ������ @ �� ��� @ ����� @ ����� ����� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,
����!��!���& "����!%
"�) (%*+ I���,�� ������� ���%- (&-�*%-
"�) (&%% �� �� � (-/ 01&/23 ���� %�*$
��()���!���
������� ���������% / �($ � 5.$-��� ������� ��� ���� 51*-
/2 �%* � 5&.( ��� ���������� ���� 5%%11
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # (&--
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� -�+$
8����!����� ������
)= ���� # 7(----
2������� ����� # (1--
���..�����! �. .���!���
��� �2� � N O -�-&@ � ����
����� � � B���� �(
����� � � N ����� -�%(
����� � � N ���� -�-1
�����"��! ��.��(�!���
���������������
���$ ��
� C��� ������������ �������� ��� ��������� �� ������@0N O -�-6@ � ��,� ���3
� ����� �������� ����� �� �� ������ ������� ���� ��,� ���� '��� �������� �� �������� � E����� ������� �� ����� ����� ��� ��������� �� ����� ����� � � C��� ������ ������� ������� 0.-�(�,�3
�����������
� 9����� ���� ����� ������� � ����,���
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
����!����
�"# $% &-+ ��% !��� �� � ���@ ���@ �������� (�6-
%� ���������� �� � ��� �� ���� ������� �(� �������� �� ������ � ����� ������@ 9%(@ &�&@ � ����,��� �������? �"#� ��� ��� "�� ��� #����"�)� "������� ������� ��� )���� ����
+�, �� $��+�- !� �))�% ��� �� ����� ������ �� �������� @ �� ����� �� � ��� � ��� �@����@ ����� ���� �� ������������ �� � � � � �;�� � ������� � ���������� <������ �������� ���� ������ ���� ����������� ��� �� � ��; ��� ���� � ����� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � ��������� �� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B '�# ��I� ����� ������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( %*�-6�(--( ��� ���� �� 9)�A=)�B ��� ���� ���� �������, �� ��� ���� ���������
E��� �� +%�--&*4�-% � (6*- J(--( ��� ���� ��������� 8�� ���� �� ������
MOLYKOTE® Longterm 2 plusHigh Performance Grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Lubricating grease for metal/metal combinations with slow to medium-fast movements especially with high loads
Standard* Unit Result
APPLICATIONS
• Used successfully for bearings, spline profiles and clutches in highly stressed motor vehicles, tractors, cranes, earth-moving machines, conveyor belts and forklift trucks.
• Also where there is a risk of fretting corrosion, groove formation (Brinell effect) or moisture.
Color Black
Consistency, density, viscosityNLGI consistency class 2DIN 51 818Worked penetration 265-295mm/10ISO 2137Density at 20°C 0.9g/mlISO 2811Base oil viscosity at 40°C¹ 265mm²/sDIN 51 562
TemperatureService temperature -25 to +110, short
period +130°C
Drop point >=175°CISO 2176Low temperature torque test at -20°CASTM-
D-1478-80Initial break-away torque 420x10ª³NmTorque after 20 minutes running time 35x10ª³Nm
Loading capacity, wear protection, service lifeFour-ball testerWeld load 3800NDIN 51 350 T.4Wear scar under 800N load 1.0mmDIN 51 350 T.5Almen-Wieland machineOK load 20000NFrictional force with OK load 3200NFAG roller element bearing tester FE 9, 4500/6000-110, F‡}
100hDIN 51 82102A
SpeedDN value 250000mm/min
ResistanceOxidation resistance, pressure drop 100h, 99°C
0.3barDIN 51 808
Corrosion protectionSKF-Emcor methodDIN 51 802Degree of corrosion 0-1
FEATURES
High load-carrying capacity•
Suitable for long-term lubrication•
In mixed friction it provides wear protection due to solid lubricants and EP (extreme pressure) additives
•
Good adhesion strength•
Good protection against corrosion•
COMPOSITION
Mineral oil•
Lithium soap•
Solid lubricants•
EP additive•
Corrosion inhibitor•
Adhesion improver•
TYPICAL PROPERTIES (continued)
TestStandard* Unit Result
Oil separationStandard test 1.7%DIN 51 817
1. Calculated viscosity value of base oil mixture.* ASTM: American Society for Testing and MaterialsISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
HOW TO USE
How to apply
Clean points of contact. As is usual with lubricating greases, apply by means of a brush, spatula, or automatic lubrication device. Can be used in central lubrication systems.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
30/11/1998
DC 2943Ref. no. 71-0076B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
��������
��!�� ���!��!�� ����,�> ����!���
��������� )��!��!��� ���!��*
������������� ���� �� ������� ��� ���� ��� ����� ���� � �� ���� �� �� ������
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� ��� ����
/����!%
"�) (&%% �� �� � (-/ 01&/23 ���� -�&.
2�� � ��� / (&
/2 &(
���..�����! �. .���!���
��� �2� � N O -�%(
��������� )��!��!���
"�)�E %.$1 ��� ���� � � $%-
? "�)� "������� ������� ��� )���� ���
+�, �� $��+�- !� �))�%8���� � ������ ������ �� ������@ ������ �� ������ ����� ��� ����� ��������� �����;� 6- ���� �������� ��� �� �� ������� � ���������� �� ������� 0���� ��� ���� �����3� ����� ����� �� ���������� �� ������ ��� ���� �����4� ����� �� �� ����������� ��9)�A=)�B 9��� ������� ��� ��� ����� ������� @ ���� � � ����� � ��� � �� � ��� �� ���������� � �� �� ������ ��:������������ �� �� ��� ���@ � �� �� ������ ���� ����� 8��� � �@ ���� ������ ����� �� ������ �������
+��/���� � ���$�����8���� ���� ��� �� ��� �
������ ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
�����"��! ��.��(�!���
���������������
���$ ��
� ������� ����� �� �������� ��� ���� ������ ��� ��������� �� ������
�����������
� ������ ��;� ���� �� �������� ������ ��� ���� ����
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 9��� ������� ��� !�; ����� !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( ($�-%�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%$% �-% � *1*& J-�(--( ��� ���� ��������� 8�� ���� �� ������
MOLYKOTE® MKL-NDispersion
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Mineral oil grease with solid lubricants dispersed in solvent
Standard* Unit Result
APPLICATION
• Used for lubrication of chains.
Color Black
DensityDensity at 20°C 0.87g/ml
Load-carrying capacity, wear protectionFour-ball tester (VKA)Weld load 1200NDIN 51 350 pt.4Wear scar under 800N load 0.9mmDIN 51 350 pt.5
Corrosion protectionSKF-Emcor methodDIN 51 802Degree of corrosion 0-1
* DIN: Deutsche Industrie Norm
FEATURES
Penetration•
Adhesion•
Protection against wear•
Corrosion protection•
Ageing stability•
COMPOSITION
Mineral oil•
Inhibitors•
Adhesion improver•
Solid lubricants•
Solvents•
HOW TO USE
How to apply
Apply thinly to clean, dry surfaces using a brush. Small chains can also be dipped. The chain can be used after evaporation of the solvent (approx. 30 minutes).
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 36 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
13/11/1998
DC 3629Ref. no. 71-0220B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
Product Information
High Performance Lubricants Molykote®
P-1900
Food Grade Paste
FEATURES
Light-colored, grease-paste with solid lubricants.
APPLICATIONS � Lubrication of mechanical components in Food & Beverage processing equipment.
Sliding surfaces and friction contacts exposed to heavy loads, especially at low to
medium speeds.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales office or your Global Dow Corning
Connection before writing specifications on this product.
Standard Property Unit Value
Color White
Consistency, Density, Viscosity
DIN 51818 NLGI Consistency Class 1
Unworked penetration mm/10 290 - 340
ISO 2811 Density at 20°C g/ml 1.11
DIN 51562 Base oil viscosity at 40°C mm2/s 85
Temperature
Service temperature range °C -30 to +300
Load carrying capacity, wear protection,
speed
DIN 51350 T4 Four ball tester, weld load N 3200
DIN 51350 T5 Four ball tester, wear scar under 800N load mm 0.90
Coefficient of friction
Screw test (Erichsen); coefficient of friction in
bolt connection M 12 8.8;
μ thread
μ head
0.10
0.10
Screw test (Erichsen); coefficient of friction in
bolt connection M12, material no. 1.4301
μ thread
μ head
0.11
0.11
Initial breakaway torque at 300°C / 21 hours
with material no. 1.7709 (starting torque M =
56 Nm)
Nm 85
Press-Fit test, μ = 0.10
no chatter
Resistance
DIN 51807 T1 Water resistance, static 1 - 90 * CTM: Corporate Test Method, copies of CTM’s are available on request.
* DIN: Deutsches Institut fuer Normung.
� Meets FDA Regulations 21 CRF
178.3570 and NSF H1 Classification for
incidental food contact
� Low coefficient of friction
� Good water resistance
� High load carrying capacity
BENEFITS
� Mineral oil
� Aluminum complex thickener
� Solid lubricants
DESCRIPTION Molykote® P-1900 is a mineral oil
based food grade paste, which meets
FDA regulations 21 CRF 178.3570
and NSF H1 classification for
incidental food contact. Molykote ®
P-1900 offers excellent low coefficient
of friction and high load carrying
capacity
HOW TO USE
The contact points should be cleaned,
wherever possible. Paste should be
applied using a suitable brush. It can
be delivered by a grease gun. Excess
lubrication does not harm.
HANDLING PRECAUTIONS Product safety information required for
safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection
USABLE LIFE AND
STORAGE Molykote®
P-1900 has a usable life of
60 months when stored at or below
20°C in the original unopened
containers.
PACKAGING Molykote® P-1900 is available in
400g cartridges, 1kg cans, 25kg pails
and 180kg drums.
Samples are available in 1kg cans.
.
LIMITATIONS This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND ENVIRONMENTAL
INFORMATION To support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Suggestions of use shall not be taken
as inducements to infringe any patent.
Dow Corning's sole warranty is that
the product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® P-1900 Food Grade Paste September 24, 2003 Dow Corning is a registered trademark of Dow Corning Corporation.
Ref. No. 80-3219-01 FPH 37189 �2003 Dow Corning Corporation. All rights reserved.
MOLYKOTE® P 37 Lubricant pasteSpecialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Extremely pure, solid lubricant paste for bolted joints. It contains no lead, nickel, sulphur, chlorine or fluorine
Standard Unit Result
APPLICATIONS
• Suitable for screws, nuts and bolts that are subjected to extremely high temperatures and which are made of heat-resistant or extremely heat resistant steels, eg those made from nickel-based alloys.
• Used successfully for the bolted joints of gas and steam turbines in power stations.
Color Grey-Black
Penetration, densityUnworked penetration 280-310mm/10ISO 2137Density at 20°C (68°F) 1.2g/mlISO 2811
TemperatureService temperature¹ -40 to 1400°C -40 to 2552°F
Load-carrying capacity, wear protection, service lifeWeld load 4400NDIN 51 350 T.4Wear scar under 800N load 1.7mmDIN 51 350 T.5
Coefficient of frictionScrew test - μ thread² 0.15Screw test - μ head² 0.09Initial break-away torque³ 126Nm
1. Temperature resistance of solid lubricants. 2. Coefficient of friction in bolted connection, M12 x 1.75, material 8.8, blackened. 3. M 12 x 1.75, with starting torque Ma = 56 Nm and heat treatment at 540°C (1004°F), 21 hours, bolt material: 21 Cr Mo Ni V 57 mat no. 1.7709.
FEATURES
Highly pure (less than 500mg of sulphur, less than 200mg of chlorine and fluorine per kg of lubricant)
•
Can be used at temperatures up to 1400°C (2552°F)
•
Coefficient of friction in the range of oiled bolts
•
Low scatter of prestressing force on tightening
•
Avoidance of stress cracks and solder brittleness
•
Enables non-destructive loosening of bolted joints even after long use at high temperatures
•
SPECIFICATIONSComplies with Siemens TLV 9600 02/01
•
Complies with General Electric TIL 1117-3RI
•
Complies with EDF-PMUC 04034•
Complies with Pratt & Whitney PWA-36246
•
COMPOSITION
Solid lubricants in practically sulphur free, partly synthetic oil
•
Thickener•
Adhesion improver•
HOW TO USE
How to apply
Clean the thread with solvent. Clean already used bolts with a wire brush. Spread an adequate amount of this product up to the root of the thread in order to obtain a good seal. For this purpose use the brush from the brush can, provided it has not been used previously for other purposes. Otherwise use a new brush.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your
local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
When stored at or below 20°C (68°F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.WE HELP YOU INVENT THE FUTURE.™
www.dowcorning.com
©0-2001 Dow Corning Corporation. All rights reserved.
03/09/2001
DC 2908Ref. no. 71-0244B-01
2 MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® P 37 Lubricant paste WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation.
MOLYKOTE® P-40��!���.��� �"7���'� ��8����!��* )��!�
��!���.��� �"7���'� ��8����!��� )��!� -7��7 ��� 8� ���" .�� �������(8�% ��" ���!������ ��8����!��* D�8�& )��!�������% !7����>)���" !� �������'� ��'����(��!� ���7 �� �)���7 -�!�� ��7�(�"�!%
������������� 8 ����� �� ������� ������ @ ���� ��� @ ����� �� ������ �� ����� ���������� ��� ������ ��� � ���,� � �� @ � ���,� ��� @ �������� � 8;�� �� ���������� ������� @ ��� �� ���� ������ �)�� '��� �9���� ��������� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
���! ��!7�"# ����(�!�� $��! 1����
���� Yellowish Brown������!���%& '������!%
"�) (%*+ I���,�� ������� ���%- *%-�*$-
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23 ��(� 360��()���!���
������� ���������
� � �� �� / �.- � 5(*-
/2 �.- � 5..1
� ���� ������� � / �.- � 5%(--
/2 �.- � 5(%6(
��� ��� 4�� 8' �
� ��������� � �*$/ 0�*%/23 .
�"# $% &-$ =� ����� ����� � ���� ��� ��� � �*-/ 0�((/23
���� 61-
�"# (%+1 ���� ��� / #��
/2 #��
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # *---
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� -�6.
2���� ����� �� � ������ � �� ($;%-1
���..�����! �. .���!���
��� �2� � @ N O -�%(
����� � � N �����% -�%1
����� � � N ����% -�-&
�E< )����� ) ������� ������� � @ NO( -�%*
�����"��! ��.��(�!���
���������������
���$ ��
� B;����� ���� ��� '��� ����� �� �������� '��� ���� �� � ���� '��� �������� 8 ����� �� ������ ���������� 9��������� ��� ���� ������� ���
������� � ��� ���� :���!����";���! ��!7�"# ����(�!�� $��! 1����
��������� )��!��!���
�"# $% &-( �=2�B���� ����� � ������ �� ����� �� -
��� ���� � � $--
%� �������� �� ������ � ����� ������@ 9%( ; %�+$@ ������� &�&@ ����,����(� ����� *--#@ ���:����� $-CF@ ��������� -�$��@ (�? "�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�%��� ����� ������ ����� �� ���������� �� � ����� �� �� ������� ��� � ������ ��� �@ ��� �� ���� � ��� " ����� � �� ��;�� ��� ���� � ����� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B � .- 9�������� ���� ��� ��������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-(.1C�-% � *&(6 J%66&�(--( ��� ���� ��������� 8�� ���� �� ������
��������
��!�� ���!��!�� ����,�> ����!���
��������� )��!��!��� ���!��*
������������� ���� �� ������� ��� ���� ��� ����� ���� � �� ���� �� �� ������
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� ��� ����
/����!%
"�) (&%% �� �� � (-/ 01&/23 ���� -�&.
2�� � ��� / (&
/2 &(
���..�����! �. .���!���
��� �2� � N O -�%(
��������� )��!��!���
"�)�E %.$1 ��� ���� � � $%-
? "�)� "������� ������� ��� )���� ���
+�, �� $��+�- !� �))�%8���� � ������ ������ �� ������@ ������ �� ������ ����� ��� ����� ��������� �����;� 6- ���� �������� ��� �� �� ������� � ���������� �� ������� 0���� ��� ���� �����3� ����� ����� �� ���������� �� ������ ��� ���� �����4� ����� �� �� ����������� ��9)�A=)�B 9��� ������� ��� ��� ����� ������� @ ���� � � ����� � ��� � �� � ��� �� ���������� � �� �� ������ ��:������������ �� �� ��� ���@ � �� �� ������ ���� ����� 8��� � �@ ���� ������ ����� �� ������ �������
+��/���� � ���$�����8���� ���� ��� �� ��� �
������ ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
�����"��! ��.��(�!���
���������������
���$ ��
� ������� ����� �� �������� ��� ���� ������ ��� ��������� �� ������
�����������
� ������ ��;� ���� �� �������� ������ ��� ���� ����
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 9��� ������� ��� !�; ����� !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( ($�-%�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%$% �-% � *1*& J-�(--( ��� ���� ��������� 8�� ���� �� ������
Product Information
High
Performance
Lubricants
FEATURES
� Compatible with most rubber and plastics
� Excellent stability at high temperatures
� Superior resistance to chemicals and
solvents
� Minimal deterioration due to oxidation,
appropriate for long-term lubrication
� Low vapor pressure (base oil)
COMPOSITION
� Perfluoro polyether
� Fluorinated polymer
� Corrosion inhibitor
MOLYKOTE®HP-870
Grease
Fully fluorinated grease provides extraordinary performance
under extreme conditions
APPLICATIONS
� MOLYKOTE HP-870 Grease can be used broadly under harsh conditions such as
high temperatures, corrosive, solvent, liquefied natural gasses, high vacuum, etc.
� This grease is ideally used for use in clean rooms, semiconductor manufacturing
equipment, cardboard manufacturing equipment, hot air dryer motor axles, etc.,
where the evaporation of the lubricant could be problematic.
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales representative prior to writing specifications on
this product.
Standard* Parameter
Appearance
Unit Value
White
JIS K 2220 Penetration (worked 60 times)
Service temperature range
NLGI class
Density
mm/10 280
ºC -20 to 250
2
g/cm3 2.0
MIL-S-8660 Bleed (200ºC 24 hours)
MIL-S-8660 Evaporation (200ºC 24 hours)
MIL-S-8660 Evaporation (200ºC 1000 hours)
ASTM D2596 Four ball weld load (1500rpm/1minute)
%
%
%
N
5.0
1.0
3.0
>4900
ASTM D2266 Four ball wear scar (1200rpm, 392N, 1 hour) mm
JIS K 2220 Low temperature torque test (-20ºC)
1.3
JIS K 2220
DIN 51 802
Starting torque
Running torque
Low temperature torque test (-40ºC)
Starting torque
Running torque
Emcor corrosion test
Base oil vapor pressure 20ºC
Ncm
Ncm
Ncm
Ncm
Pa
54
28
Not
measurable
Not
measurable
0 to 1
2x10-6
* JIS: Japanese Industrial Standard.
ASTM: American Society for Testing and Materials.
MIL: Military Specification and Standards.
DIN: Deutsches Industrie Norm.
HOW TO USE
Clean points of contact. As is usual
with lubricating greases, apply or fill
by means of a brush, spatula, or
automatic lubrication device.
HANDLING PRECAUTIONS
Although MOLYKOTE HP-870
Grease is extremely chemically stable,
it gradually begins to break down at
temperatures in excess of 250ºC
releasing a toxic gasses; be sure that
this product is only used in an
environment with adequate ventilation.
Do not smoke cigarettes if they have
been in contact with this product. Be
sure to wash your hands thoroughly
after working with this product.
Product safety information required
for safe use is not included.
Before handling, read product and
safety data sheets and container labels
for safe use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.molykote.com.
You can also obtain a copy from your
local Dow Corning sales representative
or Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE When stored, unopened in a cool, dark
place this product, has a usable life of
36 months from the date of production.
PACKAGING
This product is available in 100g
plastic cans and 750g collapsible
cartridges.
LIMITATIONS
This product is neither tested nor
represented as suitable for medical
or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION To support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLY The information contained herein is
offered in good faith and is believed
to be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customers' tests to
ensure that Dow Corning's products are
safe, effective, and fully satisfactory
for the intended end use. Suggestions
of use shall not be taken as
inducements to infringe any patent.
Dow Corning's sole warranty is that the
product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Website Guide
For more information on our
company and how to contact us, visit
our website, www.molykote.com
We help you invent the future."
MOLYKOTE HP-870 Grease
2
Ref. no. 80-3077B-01
21/02/2007
DC 4422
We help you invent the future. is a trademark of Dow Corning Corporation.
MOLYKOTE and DOW CORNING are registered trademarks of Dow Corning Corporation.
©2002, 2003 Dow Corning Corporation. All rights reserved.
�������� +��<@@������
���% .������!�" *����� )��'�"�� �>!����"����% )��.��(������"�� �>!��(� ���"�!����
������������� 9)�A=)�B C��*-- '��� � �� �� � �� ������� ���� ��� � ������ ��� � ��� �� ���� ��������� @ ����� ���@ ����@ ��:������ ����� �� � @ ����������@ ���
� ��� ���� �:����� �� ���������� ���������� �:����� ����� �������F��� �� �� ��������� ������� � ��� �������
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ����(�!�� $��! 1����
8�������� !���
L"� = (((- ������� 0���,�� 1- ��� 3 ���%- (&-
#�'" ��� (
������� ��������� ���� / �1$ � ($-
�� �� ����* (�-
9"����&11- 4���� 0(--/ (. ���� 3 > &�-
9"����&11- B�������� 0(--/ (. ���� 3 > -�(
9"����&11- B�������� 0(--/ %--- ���� 3 > %�-
8��9 �($61 2��� ���� ���� ���� 0%$--����%����3 # ***-
8��9 �((11 2��� ���� ���� ��� 0%(--���@ *6(#@ % ����3 �� %�%
L"� = (((- ��� ��������� ��:�� � 0�(-/ 3
����� ��:�� #�� .�%
E��� ��:�� #�� %�&
L"� = (((- ��� ��������� ��:�� � 0�.-/ 3
����� ��:�� #�� %%
E��� ��:�� #�� *�1
4� � ��� ����� ��� ��� (-/ �� .;%-�%-
? L"�� L���� � "�� ���� �������8��9� 8������ ������ ��� �� �� �� 9������ �9"�� 9������ ����������� �� ������ �
+�, �� $�� ��� ��� �� ���������� 8 � � ������ ��������� ���� � @ ����� �� ������ ��� �� � ��� �@ �����@ ��������� ��������� �������
���"��! ��.��(�!���C��������������������
���$ ��
� �������� ��� �� ������ �� ��� �� � B;����� ������ � ���� ��������� � �������� �� � ��� � �������� �� ����
� 9����� ���������� ��� � �;�����@���������� ��� ������� ���������
� ��� ����� ��� ��� 0�� � ���3
�����������
� ��������� ��������� 2�������� �������
+��/���� � ���$�����8������ 9)�A=)�B C��*--'��� � � ������ ���������� ����@ ���������� � �;�� �� ($-/ ��������� ���� ��������� ������� � ������� � �;�� �� � D �� ��� � �������:��� ������� �� ��� �;��� ��������� � ������� �� �� � ��,�������� �� ��� �������� ����� ������� 4� ��� � �� � ��� ��������� ���� � ��
������ ���� �������� ��:�������� ��� � � � � ��������4����� ������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@ ��� ���� �� ����� ��F������������ ��� ������� ���� ��� ��� � ��������� � �� ��� ������� �� � ��������,�������A�� �� �� � ���� � ���� ���� ��������� ��� ���� ��� ����� ������� �� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ����@ ������ � � ����@ ���,����� �� ������@ �� � � ���� ���� ��*1 ��� ���� �� ��� �� ���������
������������ ������ � ��������� � %--� ��$--� ��� �� �� �
�������������� ������ � ����� � �� ������� ��� � ������ ��� ��������� ������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � ��������� �� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � � �� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
,�8��!� ���"��� (��� ��.��(�!��� �� �����()��% ��" 7�- !� ���!��! ��& '���!��� -�8��!�& ---3(��%A�!�3��(
�� ���� �� ���� �� � ����
9)�A=)�B C��*-- '��� � �� ���� �� ���� �� � ��� � � �������, �� ��� ���� ���������( ((�%(�(--* 9)�A=)�B �� �)! )E#"#' ��� ���� ���� �������, �� ��� ���� ���������E��� �� &-�*%-*8�-% %11-& J(--(@ (--* ��� ���� ��������� 8�� ���� �� ������
�������� � � � �������������� ������
������������ ��������� ���� � ��� ��������� �������� ��� ��� � ��������� ������ �� ������ ���� ���� � ���� ��������� �����
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� !��� �
������!���%& "����!%& '������!%
�"# $% &%& #�'" �� � ��� ��� %�(
"�) (%*+ !��,�� ������� ���%- (&-�*.-
"�) (&%% �� �� � (-/ 01&/23 ���� %�(&
�"# $% $1( 4� � ��� �� �� �� � ($/ 0++/23 ��(� %---
��()���!���
������� ��������� / �.- � 5(-- 05(*-��� ��� ������ 3
/2 �.- � 5*6( 05..1��� ��� ������ 3
"�) (%+1 ���� ��� / 7($-
/2 7.&(
8��9��%.+&&- ��� ��������� ��:�� � � �*-/ 0�((/23
"���� ����,����� ��:�� #� %%&;%-�*
���:�� ���� (- ���� ���� ��� #� .%;%-�*
8��9��%.+&&- ��� ��������� ��:�� � � �.-/ 0�.-/23
"���� ����,����� ��:�� #� &$1;%-�*
���:�� ���� (- ���� ���� ��� #� $1;%-�*
���"�����%��* ��)���!%
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # *.--
��� ��)���!���
�"# $% &%+ ������ � > -�*
? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�% ��� ������ ������ � 8���� ���� �� �� ����� ��� � �� � ��� �@ ���� ��� �� ������� ��������� � ���
9)�A=)�B 2� %(6( '��� � �� ��� �� � ������ �� ��������� � �� ��� � ��; ��� ���� ���� � �
�����"��! ��.��(�!���
���������������
���$ ��
� ����������� ������ ��� ���������������� �� ����� �� � �;������ �������� ����� �;�����
� C��� ���� ��� 7($-/ 0.&(/23D�� �:���� ������� �� , �� ����� ������� ���� ��������� ���
� !��� ������ ��������� ����@�.-/ � 5(--/ 0�.-/2 � 5*6(/23D��� ��� ������ @ �� � (*-/ 0..1/23
� C��� �� � ��� � ���� �� ������ ���
� E� � � � ������ ���@ ���� �� �����������
�����������
� 2����� ������ ���� )����� ���,���
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 2� %(6( 2������������� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -&�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%1$ �-% � (66% J-�(--( ��� ���� ��������� 8�� ���� �� ������
P R O D U C T I N F O R M A T I O N
Information AboutMOLYKOTE® 3451Chemical ResistantBearing Grease andMOLYKOTE® 3452Chemical ResistantValve Lubricant
TypeFluorosilicone greases
Special PropertiesChemical resistance; good load-carrying ability, effective in hightemperatures
Primary Uses– MOLYKOTE® 3451 Chemical
Resistant Bearing Grease NLGI #2
Exceptional antifrictionlubricant for bearings exposed toharsh chemicals, solvents, hightemperatures, high speeds orheavy loads
– MOLYKOTE ® 3452 ChemicalResistant Valve Lubricant NLGI #3
Lubricant and sealant for valves,shafts and packings exposed tocorrosive or aggressive chemicalsor high temperatures
DESCRIPTIONMOLYKOTE 3451 Chemical ResistantBearing Grease and MOLYKOTE ® 3452Chemical Resistant Valve Lubricant arefluorosilicone oils thickened withfluorinated polymers. These lubricants:• Provide superior resistance to most
chemicals• Are compatible with most gaskets,
seals and packings
• Resist washout by water, fuels, oilsand solvents
These greases lubricate over a widetemperature range. MOLYKOTE 3451Chemical Resistant Bearing Grease hasgood life at temperatures from -40 to450°F (-40 to 232°C);MOLYKOTE 3452Chemical Resistant Valve Lubricanthas a serviceable temperature rangefrom -20 to 450°F (-29 to 232°C). BothMOLYKOTE 3451 Chemical ResistantBearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricantresist deterioration by solvents, acids,chlorides and other severe chemicalsas well as low-pressure steam andcondensate. (See Table I.)
Bearing tests show MOLYKOTE 3451Chemical Resistant Bearing Grease hasgood life at varying high loads andspeeds.
USESMOLYKOTE 3451 ChemicalResistant Bearing GreaseMOLYKOTE 3451 Chemical ResistantBearing Grease is an exceptional anti-friction bearing lubricant especiallydesigned for applications that experiencea wide range of temperatures, loadsand speeds. It is particularly useful inbearings exposed to harsh chemicalsor solvents, bearings used at highspeeds and bearings subjected to heavyloads. MOLYKOTE 3451 Bearing Greasecan be used on:• Chemical mixers
• Needle bearings in circuit breakers• Pumps• Processing equipment
• Fuel- and solvent-handlingequipment
• Sealed-for-life bearings that mustoperate at high speeds, heavy loads,and high and low temperatures
Valves protected by MOLYKOTE 3452 Chemical Resistant Valve Lubricant show no evidence ofcorrosion or degradation of lubricant.
BL
17
87
7-1
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
.................................................................................................... Molykote Molykote.................................................................................................... 3451 3452.................................................................................................... Chemical Resistant Chemical Resistant.................................................................................................... Bearing Grease Valve Lubricant
NLGI Consistency ...................................................................... #2 #3Color ........................................................................................... White WhiteThickener ................................................................................... Fluorinated polymers Fluorinated polymers
ASTM D 217 Penetration, worked, 60 strokes ................................................ 275 270Viscosity of fluorosilicone oil at 100°F (38°C), SUS ................ 2295 46,000Service Temperature Range1, °F (°C) ...................................... -40 to 450 (-40 to 232) -20 to 450 (-31 to 232)Max. Dn Value2 .......................................................................... 200,000 75,000Specific Gravity at 77°F (25°C) ................................................. 1.44 1.50
Fed Std 791 Bleed, at 400°F (204°C), percent .............................................. 2.7 1.2ASTM 2265 Evaporation, at 400°F (204°C), percent ................................... 3.7 1.1
Dropping Point, °F (°C) ............................................................ >536 (>280) >570 (>300)ASTM D 1264 Water Washout, at 175°F (80°C), percent ................................ 0.3 0.1Fed Std 791a3 4-Ball Weld Load,Kg ................................................................... 400 400ASTM D 1478 Low-Temperature Torque
starting, g-cm at -40°F (-40°C) ............................................... 2315running, g-cm after 1 hr at -40°F (-40°C) ............................. 1960
1Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including thespecific application environment.
2Dn value = shaft size of bearing in mm x rpm; based on estimate.3Method 6503.
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for yourspecifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI.Call (989) 496-6000.
Table I: Chemical Resistance of MOLYKOTE 3451 Chemical Resistant Bearing Grease and MOLYKOTE 3452 ChemicalResistant Valve Lubricant
.......................................................................................................... MOLYKOTE MOLYKOTE
.......................................................................................................... 3451 3452
.......................................................................................................... Chemical Resistant Chemical Resistant HydrocarbonAfter 24 hours at 77°F (25°C)1 ................................................................................................ Bearing Grease Valve Lubricant Grease2
Diesel ................................................................................................ Good3 Good PoorKerosene .......................................................................................... Good Good FairSilicone Fluid ................................................................................... Fair Good PoorToluene ............................................................................................ Good Good PoorHexane ............................................................................................. Fair Fair PoorXylene .............................................................................................. Good Good PoorIsopropanol ...................................................................................... Good Good FairMethanol .......................................................................................... Good Good FairVM&P Naphtha ............................................................................... Good Good Poor1Test method Federal Standard 791C-6.2.2A lithium-thickened petroleum grease.3Good no observable effect on grease [grease slightly soft; poor adhesion]; Fair grease very soft; cracked and poor adhesion; Poor grease hardened or dissolved; noadhesion.
MOLYKOTE 3452 ChemicalResistant Valve LubricantMOLYKOTE 3452 Chemical ResistantValve Lubricant is an exceptional valvelubricant and sealant product particu-larly suited for applications where cor-rosive or aggressive chemicals are used.MOLYKOTE 3452 Valve Lubricant canbe used on:• Plug valves• Mechanical seals and packings
• Slow-speed roller and journalbearings
• Moderate-speed ball bearings• Instruments in high vacuum, at high
temperatures and in corrosiveatmospheres
• Rotary and reciprocating shaft seals• Flexible ball joints
LIMITATIONSMOLYKOTE 3451 Chemical ResistantBearing Grease should not be appliedto surfaces to be painted.MOLYKOTE 3451 Chemical ResistantBearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricant arenot recommended for use with highlyoxidative chemicals (liquid Cl2 orliquid O2, for example).These greases are soluble in ketonessuch as acetone, methyl ethyl ketoneand methyl isobutyl ketone.
This product is neither tested norrepresented as suitable for medicalor pharmaceutical uses.
HOW TO USEApplicationMOLYKOTE 3451 Chemical ResistantBearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricantcan be applied using conventionalmethods of grease application brushing, grease gun or automaticapplicators.
SHIPPING LIMITATIONSNone.
STORAGE AND SHELF LIFEWhen stored at or below 90°F (32°C),MOLYKOTE 3451 Chemical ResistantBearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricanthave a shelf life of 60 months fromdate of manufacture.Note: In storage, a small amount of oilmay separate from MOLYKOTE 3451Chemical Resistant Bearing Grease.This separation does not materiallyaffect the lubricating qualities of thegrease. Simply stir fluid back into thegrease.
PACKAGINGMOLYKOTE 3451 Chemical ResistantBearing Grease is available in tubes cartridges and pails
MOLYKOTE 3452 Chemical ResistantValve Lubricant is available in tubes, cartridges, pails.
SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS AND CON-TAINER LABELS FOR SAFE USE,PHYSICAL AND HEALTH HAZARDINFORMATION. THE MATERIALSAFETY DATA SHEET IS AVAILABLEFROM YOUR DOW CORNING REP-RESENTATIVE, OR DISTRIBUTOR,OR BY WRITING TO DOW CORNINGCUSTOMER SERVICE, OR BYCALLING (989) 496-6000.
LIMITED WARRANTY PLEASE READ CAREFULLYDow Corning believes that theinformation in this publication is anaccurate description of the typicalcharacteristics and/or uses of theproduct or products, but it is yourresponsibility to thoroughly test theproduct in your specific application todetermine its performance, efficacyand safety. Suggestions of uses shouldnot be taken as inducements toinfringe any particular patent.
Figure 1: Percent Volume Change of Various Rubbers in MOLYKOTE 3452 Chemical Resistant Valve Lubricant
Volu
me
Cha
nge,
per
cent
Dow Corning CorporationMidland, Michigan 48686-0994
Dow Corning is a registered trademark ofDow Corning Corporation.
©1994, 1998 Dow Corning Corporation.All rights reserved.
Printed in USA AGP3853A Form No. 10-813-98B-01
Unless Dow Corning provides you witha specific written warranty of fitnessfor a particular use, Dow Corning’ssole warranty is that the product orproducts, as supplied, will meetDow Corning’s then current salesspecifications. DOW CORNINGSPECIFICALLY DISCLAIMS ANYOTHER EXPRESS OR IMPLIEDWARRANTY, INCLUDING THEWARRANTIES OF MERCHANT-ABILITY AND OF FITNESS FORUSE. Your exclusive remedy andDow Corning’s sole liability for breachof warranty is limited to refund of thepurchase price or replacement of anyproduct shown to be other than aswarranted, and Dow Corning expresslydisclaims any liability for incidental orconsequential damages.
�������� 0 �?@+�*7 ���.��(���� ������
+�*7 )��.��(���� *����� .�� (�!��9(�!�� ��(8���!������'��'��* ���- !� (�"��(�.��! (�'�(��!� ��" ��*7! !� 7��'%���"��*�& )��!�������% �! 7�*7 !�()���!����
������������� ������� ��� ��������� ��� ��� ���� � ����� ������ �� ��� � ������ ���� @ ����������� �� � �;�� �� � ������ ���� ��������� �
� I �� ���� ����� � ���� �� ������ ������ �� ������� � ������ � �����,�� @ ������F�� ��� @ ����� � ������ @ �� �� ������� ���� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,
������!���%& "����!%& '������!%
�"# $% &%& #�'" �� � ��� ��� (
"�) (%*+ !��,�� ������� ���%- (1$�(6$
"�) (&%% �� �� � (-/ 01&/23 ���� -�&1
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23% ��(� (1-
��()���!���
������� ��������� / �*- � 5%1-@ 5%&-��� ��� ������
/2 �(( � 5*(-@ 5*$1��� ��� ������
"�) (%+1 ���� ��� / �/2 #��
8��9��%.+&&- ��� ��������� ��:�� � � �(-/ 0�./23
"���� ����,����� ��:�� #� $6*;%-�*
���:�� ���� (- ���� ���� ��� #� 1&;%-�*
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # ((--
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� %�*
8����!����� ������
)= ���� # (----
2������� ����� ��� )= ���� # *-&$
��������� )��!��!���
�"# $% &-( �=2�B���� �����
������ �� ����� �� -�%
�����"��! ��.��(�!���
���������������
���$ ��
� ��� � ���� �� ��,��� ������� ��� ������� ��������� ��� ���� ��� ��������� �� ��� ���������� �;�����
� B������� ���� �������� ��������� �� ���� �� ����� ������������ ���� �������
� #� ���� ���� �� �:���� � ������� ����� ���� ��������� ���
� '��� ���� �� ��� �� � ���
�����������
� 9����� ���� "������ ���,���� ���� �� ������� � ����� �������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��� ��)���!���
�"# $% &%+ ������ � > (�-
%� �������� �� �� �� ����� �� �� � ��� ��;����? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�% ��� ��� �� ����� 8���� � ������ � ��������� ���� � @ � ����� �@ �����@ ���� ���� �� ���������������� ������� ������� ����������� �� ����� ��������� � ����� � ��; ��� ���� ���� � �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 24 %&- C��� ���������� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( ($�-%�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%1. �-% � (66+ J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
�������� =�������
�7�� �� � �������� *����� !7�! ��� 8� ���" �! !�()���!���� 7�*7��!7�� !7��� �. ���(�� �������� *������
������������� "���� ��� � � � ��� ������� @ ,�� ������ @ ���� �� �������� ���� @ ��� ����� �������� ��, @ ,�������� ����� ����,�� @ ���
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ����(�!�� $��! 1����
8�������� 4���,
4� � ��� �� �� �� � ($/ ��(� *%1
L"� = (((- ������� 0���,�� 1- ��� 3 ���%- (1- � *--
#�'" ��� (
������� ��������� ���� / �(- � (6-
�� �� ����* %�%
L"� = (((- ���� ��� / #��
9"� � &11- 4���� 0%$-/ �(. ���� 3 > .�-
9"� � &11- B�������� 0%$-/ �(. ���� 3 > %�-
L"� = (((- !��� �� ��� 0*&/ �% ����3 > -�$
8��9 � ($61 2��� ���� ���� ���� 0%$--����%����3 # %$--
9�;���� � ����� �������
+$@---
?L"�� L���� � "�� ���� �������8��9� 8������ ������ ��� �� �� �� 9������ �9"�� 9������ ����������� �� ������ �
+�, �� $�� ��� ��� �� ���������� 8 � � ������ ��������� ���� � @ ����� �� ������ ��� �� � ��� �@ �����@ ��������� ��������� �������
�� � � � � ����� ������ � �� �� � � ��� ������ ���� ���� ���� �
+��/���� � ���$�������� ������ ��� ������ �� ,� ����� � !��� ���� �:����� � ��� ��� ��� ������ �� �������" �� ��� �� ���� ��� ,� ����� @ ���������� �� � ������������ ���� �� ��, ������� ���� ����� ���� !� � ��� ��������� �����������
�����"��! ��.��(�!���
���������������
���$ ��
� ��� � ���@ ��� � ���� ��������� � �������� ������ ������� �������� �;����� �� � ���� !��� �� � �
�����������
� ������� ���� ���� ����,� ���� �� �������
$��0�� ��� ��/��� ���!�� ����@ ������ � � ����@ ���,����� �� ������@ �� � � ���� ���� ��*1 ��� ���� �� ��� �� ���������
������������ ������ � ��������� � %,� ��
8I�")#
%� ��� ������� � �� ������ ���������� ����� @ � ��������������� � 8� ��������� ��� �� ������ ���� � �� ������ ��������� �;����� � ������� ��������������� � ������ ���������@��������� @ �� ���� ������ � ��(� #� ������� ��� ���� �� ����������� �� ������ � �� ��������� ���� ���� �������� �� ������*� ��� ������ �� ��������� ������ ���� � �@ �� � � ����� ���� � � ������� �:�����@������������� ������ @ ���.� 4� ��� � ���� �� ������� ������� ��� 09���3 �� ������ �������� �� ������ ������ � ��$� ��� ��� ���� 8 ��@ ���@������ ���������� �� ��� ���� �� �������
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B .% '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -$�-+�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� &-�*-61�-% � ..(( J(--( ��� ���� ��������� 8�� ���� �� ������
Product Information High Performance
Molykote® 33 Extreme Low Temperature Bearing Grease, Molykote® 41 Extreme High Temperature Bearing Grease, Molykote® 44 High Temperature Bearing Grease
Lubricants
FEATURES Lubricants for antifriction bearings and plastic and rubber parts
USESAll three Molykote® Bearing Grease are used to lubricate ball bearings operatingunder light to moderate loads. These can be used for:
Molykote® 33 Extreme Low Temperature Bearing Grease• Freezer cart casters and cold room conveyor equipment• Utility disconnect switch contacts• Plastic electric clock motors• Maximum-demand meters, power-factor meters, watt-hour meters• Windshield wiper motor gears• Photographic, optical and surveying equipment• Oscillographs, geophysical and light, low-torque instruments• Starter clutch drives
Molykote® 41 Extreme High Temperature Bearing Grease• Antifriction bearings of high-temperature equipment• Oven conveyor bearings• Wheel bearings of core oven carts• Governor linkage of steam turbines• Ball and socket connections of power insulators
Molykote® 44 High Temperature Bearing Grease • Kiln preheater fans, oven fans, radiator cooling fans• Textile slashers and driers• Aircraft engine• Conveyor systems
These greases do not soften or affect most plastics and are used to lubricateplastic gears, bearings and cams, as well as metal and rubber parts. Because of low torque requirements, Molykote® 33 Extreme Low Temperature BearingGrease is especially effective in equipment that must start in extreme cold.
Oxidation Resistance – Molykote® Bearing Greases are recommended for use inunits that must remain operable when subjected not only to low and highoperating temperatures, but also to severe weathering and oxidation.
� Resistance to oxidation, moisture andcorrosive atmospheres
� Inertness� Good shear stability� Wide service temperature range:
33 Extreme Low TemperatureGrease: -100 to 400°F (-73 to 204°C)41 Extreme High TemperatureGrease: 0 to 550°F (-18 to 288°C)44 High Temperature Grease: -40 to 400°F (-40 to 204°C)
� Compatible with many plastics
COMPOSITION� Lithium soap� Phenylmethyl silicone oil
TYPICAL PROPERTIESSpecification Writers: These values are not intended for use in preparing specifications. Please contact your localDow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Method Test Results
33 Light 33 Medium 41 Grease 44 Light 44 Medium
Color Off White Off White Black Off White Off White
Thickner Lithium Soap Lithium Soap Carbon Black Lithium Soap Lithium Soap
Base Oil Silicone Silicone Silicone Silicone Silicone
DIN 51 562 Base Oil Viscosity @ 25°C, mm2/s 100 100 316 125 125
ASTM D 217 Penetration, worked 60 strokes, mm 320 280 280 300 280
NLGI # 1 2 2 ~1 2
DIN 51 350 pt4 4 ball weld load, N (kg) 1200 (122) 1200 (122) 1500 (152) 1100 (113) 1100 (113)
Max Dn Value1 (Bore Size in mm X rpm) 250,000 200,000 75,000 350,000 300,000
Service Temperature2 Degrees C (F) -73 to 204 (-100 to 400)
-73 to 204 (-100 to 400)
-18 to 288 (0 to 550)
-40 to 204 (-40 to 400)
-40 to 204 (-40 to 400)
ASTM D 2265 Drop Point Degrees C (F) 226 (439) 226 (439) >300 (>572) 220 (432) 220 (432)
Fed Std 791 Bleed after 24 hrs @149°C (300°F) % 2 1 4.8 3 2.5 2
DIN 51 817 Oil Separation (Standard Test, 7 days at 40°C) % 3.2 1.6 2.6 2.4 1.4
Specific Gravity @25°C (77°F) 0.97 0.97 1.14 1.05 1.05
ASTM D 1478-80 Low Temperature Torque @ -73°C
Initial Break-away Torque, Nm 130 x 10 -3 164 x 10 -3
Torque after 20 minutes running time, Nm 13 x 10 -3 22 x 10 -3
Low Temperature Torque @ -40°C
Initial Break-away Torque, Nm 225 x 10 -3 336 x 10 -3
Torque after 20 minutes running time, Nm 60 x 10 -3 124 x 10 -3
DIN 51 808 Oxidation Resistance, pressure drop 100hr,99°C (210°F) bar (psi) 0.4 (5.80) 0 0.1 (1.45)
DIN 51 821-02-A FAG Rolling Element Bearing Tester, FE9, 1500/6000-150, F50, Hrs 110 110
1Maximum Dn values are approximations and will vary widely with temperature, load and bearing type.
Molykote® 33 Extreme LowMolykote® 41 Extreme HigMolykote® 44 High TempeRef. No. 10-814C-01
2Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specificapplication environment.3Values are at 392°F (200°C).Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may beobtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
Figure 1. Suggested Product Temperature Range Recommendations
Limitations of Typical Organic Greases
-100°F -20°F 260°F 450°F 550°F
Molykote® 33 Extreme Low Temperature Grease
We help you invent the future is a trademark of Do Temperature Bearing Grease w Corning Corporation.h Temperature Bearing Grease egistered trademark of Dow Corning Corporation.rature Bearing Grease ow Corning is a registered trademark of Dow Corning Corporation.
DIC164544 �2006 Dow Corning Corporation. All rights reserved.
Molykote is a rMay 4, 2006, DMolykote® 44 High Temperature Grease
Molykote® 41 ExtremeHigh Temperature Grease
DESCRIPTIONMolykote® 33 Extreme Low Temperature Bearing Grease,Molykote® 41 Extreme High Temperature Bearing Grease and Molykote® 44 High TemperatureBearing Grease are silicone lubricatingoils with thickeners added.Molykote® 33 Extreme Low Temperature Bearing Grease and Molykote® 44 High TemperatureBearing Grease are thickened with aspecial lithium soap; Molykote® 41Extreme High Temperature BearingGrease is thickened with carbon black.
Molykote® 33 Extreme Low Temperature Bearing Grease and Molykote® 44 High TemperatureBearing Grease are available in light and medium consistencies – NLGI #1and #2. Molykote® 41 Extreme HighTemperature Bearing Grease is available in a medium consistency – NLGI #2.
LISTINGS/SPECIFICATIONSMolykote® 33 Extreme Low Temperature Bearing Grease is USDA listed for use as a lubricant where thereis no possibility of food contact.
HOW TO USE Conventional grease applicationmethods – brushing, grease gun orautomatic application – are suitable for use with these Molykote® Bearing Greases. Laboratory tests and fieldreports indicate that “heavy duty” guns available from such manufacturers asLincoln-St. Louis are preferred.
Note: Extra care should be taken at all times to prevent dirt fromcontaminating the lubricant. Thesegreases should be packed with a cleanmetal or ebonite spatula.
LIMITATIONSThese greases should not be applied tosurfaces that are to be painted. Thesegreases should not be used with highlyloaded ferrous metal bearing
combinations, especially where slidingfriction is encountered.
Molykote® 41 Extreme High Temperature Bearing Grease – Bearings operating at extremely hightemperatures need to be frequently monitored to ensure that the grease hasnot dried out. If this occurs, moregrease can be added, or the existinggrease rejuvenated by addingDow Corning® 710 Fluid.
These products are neither tested nor represented as suitable for medical or pharmaceutical uses.
SHIPPING LIMITATIONSNone.
USABLE LIFE AND STORAGEWhen stored at or below 90°F (32°C),Molykote® 33 Extreme Low Temperature Bearing Grease,Molykote® 41 Extreme High Temperature Bearing Grease and Molykote® 44 High TemperatureBearing Grease have a shelf life of60 months from date of manufacture.Refer to product packaging for “UseBy” date.
PACKAGINGNot all sizes available in all geographies.
Molykote® 33 Extreme Low Temperature Bearing Grease is supplied in 100-g tubes, 150-g tubes,400-g cartridges, 1-kg cans, 3.6-kgcans, 18-kg pails, 25-kg pails, 55-kgdrums, and 180 kg drums.
Molykote® 41 Extreme High Temperature Bearing Grease is supplied in 100-g tubes, 150-g tubes,400-g cartridges, 1-kg cans, 3.6-kgcans, 5-kg pails, 18-kg pails, 25-kgpails, and 181.4-kg drums.
Molykote® 33 Extreme Low Temperature Bearing Grease We help you invent the future is a trademark of Dow Corning Corporation.Molykote® 41 Extreme High Temperature Bearing Grease Molykote is a registered trademark of Dow Corning Corporation.Molykote® 44 High Temperature Bearing Grease May 4, 2006, Dow Corning is a registered trademark of Dow Corning Corporation.Ref. No. 10-814C-01 DIC164544 �2006 Dow Corning Corporation. All rights reserved.
Molykote® 44 High TemperatureBearing Grease is supplied in 100-gtubes, 150-g tubes, 400-g cartridges,
3.6-kg cans, 5-kg pails, 18-kg pails,25-kg pails, and 180-kg drums.
HANDLING PRECAUTIONSProduct safety information required forsafe use is not included. Beforehandling, read product and safety datasheets and container labels for safe use, physical and health hazardinformation. The material safety datasheet is available on the Dow Corningwebsite at www.dowcorning.com. Youcan also obtain a copy from your localDow Corning sales representative or Distributor or by calling your localDow Corning Global Connection.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their productsafety needs, Dow Corning has an extensive Product Stewardshiporganization and a team of ProductSafety and Regulatory Compliance(PS&RC) specialists available in eacharea.
For further information, please see ourwebsite, www.dowcorning.com or consult your local Dow Corningrepresentative.
Molykote® 33 Extreme Low Temperature Bearing Grease We help you invent the future is a trademark of Dow Corning Corporation. Molykote® 41 Extreme High Temperature Bearing Grease Molykote is a registered trademark of Dow Corning Corporation. Molykote® 44 High Temperature Bearing Grease May 4, 2006, Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 10-814C-01 DIC164544 �2006 Dow Corning Corporation. All rights reserved.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Information AboutMolykote® G-4500Multi-PurposeSynthetic Grease andMolykote® G-4700Extreme PressureSynthetic Grease
TypeSynthetic lubricants
Physical FormGreases, NLGI #2
Special FeaturesMulti-purpose capabilities; widetemperature operating range;broad compatibility
Primary UseLong-term lubrication forassembly and maintenance
DESCRIPTIONMolykote® G-4500 Multi-PurposeSynthetic Grease and Molykote®
G-4700 Extreme Pressure SyntheticGrease are new specialty lubricantsthat combine the benefits of wideoperating temperatures and broadcompatibility with varied materials.
BENEFITSBoth Molykote G-4500 Multi-PurposeSynthetic Grease and Molykote G-4700Extreme Pressure Synthetic Grease:• Are formulated to provide higher
load carrying capacity, greater wearresistance and longer service lifecompared with conventionalpetroleum-based lubricants
• Are NLGI #2 greases• Provide good compatibility with
most industrial and engineeringsubstrates including many plasticand rubber materials
• Excellent low temperature torqueand water washout resistance
Molykote G-4500 Multi-PurposeSynthetic Grease features:• A unique formulation that includes
polyalphaolefin (PAO) base oil,aluminum complex thickener andpolytetrafluoroethylene (PTFE) aswell as other fortifiers
• Meets FDA Regulation 21 CFR1789.3570 as a lubricant withincidental food contact
Molykote G-4700 Extreme PressureSynthetic Grease features:• A unique formulation that includes
polyalphaolefin (PAO) base oil,lithium complex thickener,molybdenum disulfide (MoS2) andother fortifiers
• Designed to handle extreme loadsand applications involving vibrationand/or shock loading
• Listed by Cincinnati Machine as anapproved lubricant to their P-64specification
USESBoth greases can be used with rollingelement and plain bearings, pivotpins, cams, guides, ways, drive screws,gears, splines and other machineelements.
Molykote G-4500 Multi-PurposeSynthetic Grease can be used in food-processing applications involvingmixers, motors, conveyors, low-temperature equipment, packagingmachines and many other applicationsin or out of the food processingindustry where a white grease may bedesirable. Such applications mayinvolve furniture, instrumentation,photo and optical equipment.Molykote G-4700 Extreme PressureSynthetic Grease can be used in mostnon-food related grease applicationssuch as metal working machines,motors, fans, blowers, conveyors, wheelbearings and custom machinery whereheavy duty, long-lasting lubrication isdesired.
LIMITATIONSThese products are neither tested norrepresented as suitable for medical orpharmaceutical uses.
AUTHORIZATIONSMolykote G-4500 Multi-PurposeSynthetic Grease complies with FDARegulation 21 CFR 178.3570 as alubricant with incidental food contact.Molykote G-4700 Extreme PressureSynthetic Grease meets Cinncinnati
Table I: Material Compatibility1
Elastomers ........................ CompatibilityButyl .................................. GoodUrethane ............................ ExcellentNeoprene ........................... ExcellentEPDM ............................... FairSBR .................................... GoodNitrile ................................. ExcellentNatural Rubber .................. PoorSilicone ............................... GoodViton ®2 ................................ Excellent
PlasticsABS .................................... ExcellentPPO (polypropylene
oxide) ............................ ExcellentNylon ................................. ExcellentPBT.................................... ExcellentPTFE resin ........................ Excellent1Compatibility rating for elastomers is based onrelative percent change in volume after 70 hours at70°C (158°F). Compatibility rating for plastics isbased on relative percent change in volume after 70hours at 70°C (158°F).
2Viton is a registered trademark of E.I. du Pont deNemours Company.
P R O D U C T I N F O R M A T I O N
TYPICAL PROPERTIES1
These values are not intended for use in preparing specifications.
Molykote G-4500 Molykote G-4700Multi-Purpose Extreme Pressure
Synthetic Grease Synthetic GreaseASTM D 445 Base Oil Viscosity,
at 104°F (40°C), cSt .............................................................. 110 150at 212°F (100°C), cSt ............................................................ 13.5 20
Thickener Type ......................................................................... Aluminum Complex Lithium ComplexASTM D 217 Penetration at 77°F (25°C), mm/10 (W/60) ............................... 265-295 265-295
Specific Gravity at 77°F (25°C) ................................................ 0.84 0.87ASTM D 2265 Dropping Point, °F (°C), min .................................................... 520 (271) 545 (285)FTM 321.1 Bleed/Evaporation, 24 hours at 212°F (100°C) ......................... 3.1/0.4 2.5/0.2ASTM D 4693 Low Temperature Torque at -40°F (-40°C), Nm ...................... 0.9 1.1ASTM D 2266 Four Ball Wear, 40 kg, 1200 rpm, mm ....................................... 0.50 0.32ASTM D 2596 Four Ball EP, Weld Load, kg, min .............................................. 315 400ASTM D 2509 Timken OK Load, lb, min .......................................................... 40 60
Temperature Range, estimated, °F (°C) ..................................... -60 to 325 (-51 to 163) -40 to 350 (-40 to 177)Dn, bearing ID (mm) × rpm, estimated ...................................... 325,000 350,000
1Note: These are preliminary figures based on initial test results.
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis foryour specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland,MI. Call (989) 496-6000.
Machine P-64, Ford ESA-MIC75-B, GM998525H and NLGI GC-LB.
HOW TO USEApply using conventional greaseapplication methods, i.e., clean brush,grease gun and manual or automateddispensing equipment.
SHIPPING LIMITATIONSNone.
STORAGE AND SHELF LIFEMolykote G-4500 Multi-PurposeSynthetic Grease and Molykote G-4700Extreme Pressure Synthetic Grease havea shelf life of 60 months from date ofmanufacture.
PACKAGINGMolykote G-4500 Multi-PurposeSynthetic Grease and Molykote G-4700Extreme Pressure Synthetic Grease isavailable in 3-oz (85-g) tubes, 14.1-oz(400-g) cartridges, 35.3-lb (16-kg)pails and 397-lb (180-kg) drums.Molykote G-4500 Multi-PurposeSynthetic Grease is also available in an11 oz. aerosol can.
SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS AND CON-TAINER LABELS FOR SAFE USE,PHYSICAL AND HEALTH HAZARDINFORMATION. THE MATERIALSAFETY DATA SHEET IS AVAILABLEFROM YOUR DOW CORNING REP-RESENTATIVE, OR DISTRIBUTOR, ORBY WRITING TO DOW CORNINGCUSTOMER SERVICE, OR BYCALLING (989) 496-6000.
LIMITED WARRANTYINFORMATION - PLEASE READCAREFULLYThe information contained herein isoffered in good faith and is believed tobe accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s products aresafe, effective, and fully satisfactory forthe intended end use. Suggestions of
use shall not be taken as inducements toinfringe any patent.Dow Corning’s sole warranty is that theproduct will meet the Dow Corning salesspecifications in effect at the time ofshipment.Your exclusive remedy for breach ofsuch warranty is limited to refund ofpurchase price or replacement of anyproduct shown to be other than aswarranted.DOW CORNING SPECIFICALLYDISCLAIMS ANY OTHER EXPRESSOR IMPLIED WARRANTY OFFITNESS FOR A PARTICULARPURPOSE OR MERCHANTABILITY.DOW CORNING DISCLAIMSLIABILITY FOR ANY INCIDENTALOR CONSEQUENTIAL DAMAGES.WE HELP YOU INVENT THEFUTURE.™
www.dowcorning.com
03/11/02 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.Ref. No. 10-887A-01 FPH29501 ©2002 Dow Corning Corporation. All rights reserved.
�������� ��=6@@9��=6@����!��)��)��� �%�!7�!�� *�����
,7�!� .��" *��"� �%�!7�!�� *������
������������ '����� ����� � ���� �� � ��� ���� ����� ���� � �� �� � �� � ����������� �� ���� ������ @ ���� �� @ ��� @ ����� @ ��� @ ����� ���� @ ���� @ ���� �� ���� ������ ����� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
����# ���)��!% $��! 1����
��=6@@ ��=6@�
������!���%& 1������!%& �)���.�� ���'�!%
�"# $% &%& #�'" �� � ��� ��� ( %
8��9 �(%+ ������� � ($/ 0++/23 0!�1-3 ���%- (1$�(6$ *%-�*.-
8��9 �..$ 4� � ��� �� �� �� � .-/ 0%-./23 �� %-- %--
8��9 �..$ 4� � ��� �� �� �� � %--/ 0(%(/23 �� %.�. %.�.
"�) (&%% �������� ������ � ($/ 0++/23 ���� -�&. -�&*
��()���!���
���������� ���� 0�����;����3 / �.- � %$- �.- � %$-
/2 �.- � *-( �.- � *-(
8��9 �((1$ ������� ��� / 7(+- 7(1-
/2 7$%& 7$--
2� +6%�*(�( )�� �����@ (. ���� @ %--/ 0(%(/23 �> *�% .�+
2� +6%�*(�( )�� ���������@ (. ���� @ %--/ 0(%(/23 �> -�. -�$
8��9 �.16* ������������� ��:�� � �.-/ 0�.-/23 #� -�6 -�+
���" ����%��* ��)���!%& ,��� ���!��!���& �)��"
8��9 �((11 2�������� ����@ .-,�@ %(--��� �� -�$ -�$
8��9 �($61 2�������� B�@ ���� ����@ ������ # 7*@%-- 7*@%--
8��9 �($-6 �"9=B# � @ )= ���� ,� 7%& 7%&
�@ ������ "� 0��3;0���3@ � ����� *($@--- *($@---
? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
�����"��! ��.��(�!���
���������������
���$ ��
� !��� ������ ��������� ����� �������� ��� ��� ��� �� ����� ����
� 9�� 2�8 E������� (% 2E %+&�*$+-�� I��8 C% ��� ������� ���������� ���� ����
� 2���� ����� �� � ���� !��� ������ 8�������� � #�'" �� � ������ � % �� (
0������
� 2�������� � ������� ������ ����������� �������@ ������ ���� �� � ����� ����� ������ ���� �������� ��������� ����������� �� �������
� ������� ���� ����������� ��� �� ��� ���� �� �������� �� ��� ������� ��� ��� �� �� �������������
� B;����� ��� ��������� ��:��� ��� �� � ��� ��������� �� '�.$-%����� � � � ������� �� �� �� � ��
�����������
� �8) �� � ���� 8������ ������; ���,���� 2������� ��� �������������������0��2B3
/��� ������9)�A=)�B '�.$--�'�.$-%9��������� � ����� ���� � ������������������ ���� � �� �������� ����� �� ���� ���������������� ���� �� ���������������� ��� ������ ������� �4�� ��� ���,��� ��� � �������������; �� ���� ���� ����������� � ���� �� �� � �� ��������� ������ @ ���� @ ���� �� ����� ������ � � ���� ����� �����������
+�, �� $��8���� � �� �������� ���� ���������� ����� @ ����@ ���� ��� �@���� � �� �� ����� �� ��������� �� �� �:������
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� .-/ 0%-./23� �� ������� ������ ������ @�� � ������ ���� � � ���� ���� ��1- ��� ���� �� ��� �� ���������
������������ � ������ ��� ��������� �������� ����� ������ �F� �������� ������ �F� �������� ����� �� ������ ���� ���� ���� ��� ���� ���� )����� ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � ��������� �� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(---3(��%A�!�3��(
9)�A=)�B '�.$--�'�.$-% 9��������� � ����� ���� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -(�%-�(--( ��� ���� �� 9)�A=)�B ��� ���� ���� �������, �� ��� ���� ���������
E��� �� &-�*%$-�-% � ..(( J(--( ��� ���� ��������� 8�� ���� �� ������
Features• Clean, white appearance• High-performance capability• Excellent lubricating properties• Good resistance to water
washout
Dow Corning®
White EPBearing Grease
The Number-OneChoice WhenClean Really
Counts in Grease.
Dow Corning ® White EP BearingGrease1 is a high-performancegrease with a mineral oil base. It isthickened with an aluminumcomplex and contains white solidlubricants. Designed as a clean,food-grade alternative to commonblack greases, Dow Corning WhiteEP Bearing Grease offers highperformance and high-loadcapability.
To Learn More ...For more information aboutDow Corning White EP BearingGrease, contact your Dow Corningrepresentative. Or call (517) 496-6000.
• High load-carrying capacity• Meets FDA Regulation 21 CFR
178.3570 and USDA H1classifications for incidentalfood contact
ApplicationsDow Corning White EP Bearing Grease can be used to lubricatebearings, gears, chains and sliding mechanisms in process machinery,in canneries, dairies, beverage plants, meat processing plants andpharmaceutical plants. It is an excellent choice for operations whereproducts must be manufactured, packaged or transported withoutblack material contamination. Dow Corning White EP Bearing Grease isappropriate for low-to-high loads, moderate-to-high temperatures andmoderate-to-high speed applications.
AV
01
26
9
1Formerly Dow Corning ® Food Grade Grease.
AV
01
72
2
Typical PropertiesThese values are not intended for use in preparing specifications.
Color ................................................................. WhiteBase Oil ..................................................... Mineral oilBase Oil Viscosity/SUS
at 100°F (38°C) ................................................ 490Solid Lubricant Content,
percent ................................................................. 5Thickener .................................. Aluminum complex
ASTM D 217 Penetration, worked 60 ...................................... 280Consistency, NLGI.................................................. #2Operating Temperature
Range1, °F (°C) ..................... 0 to 300 (-17 to 149)Fed Std 791 Bleed at 212°F (100°C), percent .......................... 1.4Fed Std 791 Evaporation at 212°F (100°C), percent ............... 1.4ASTM D 2266 4 Ball Wear Scar, 1200 rpm,
1 hour at 167°F (75°C), mm........................... 0.64ASTM D 2596 4 Ball Weld Load, N ........................................... 1300
Estimated Maximum Dn Value .................... 200,000ASTM D 2265 Dropping Point, °F (°C) ............................ 518 (270)
1Estimated service temperature range based on product formulation and laboratory testing. Actual servicetemperature range is dependent on other factors including the specific application environment.Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product anduse it as a basis for your specifications. It may be obtained from any Dow Corning Sales Office, or fromDow Corning Customer Service in Midland, MI. Call (517) 496-6000.
Dow Corning CorporationMidland, Michigan 48686-0994
Dow Corning is a registered trademark of Dow Corning Corporation.
©1994, 1998 Dow Corning Corporation. All rights reserved.
Printed in USA AGP3858 Form No. 10-811-98
LIMITED WARRANTY PLEASE READ CAREFULLYDow Corning believes that the information in this publication is an accurate description of the typicalcharacteristics and/or uses of the product or products, but it is your responsibility to thoroughly test theproduct in your specific application to determine its performance, efficacy and safety. Suggestions of usesshould not be taken as inducements to infringe any particular patent.
Unless Dow Corning provides you with a specific written warranty of fitness for a particular use,Dow Corning’s sole warranty is that the product or products will meet Dow Corning’s then current salesspecifications. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIEDWARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR USE.Your exclusive remedy and Dow Corning’s sole liability for breach of warranty is limited to refund of thepurchase price or replacement of any product shown to be other than as warranted, and Dow Corningexpressly disclaims any liability for incidental or consequential damages.
Dow Corning White EP Bearing Grease is available from:
SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFOREHANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELSFOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATASHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BYWRITING TO DOW CORNING CUSTOMER SERVICE, OR BY CALLING (517) 496-6000.
How To UseDow Corning White EP Bearing Greasecan be applied by hand packing, hand-operated grease guns, automaticgreasing equipment and centrallubricating systems. When lubricatingantifriction bearings, follow thebearing manufacturer’s instructions.When lubricating plain bearings, thenew grease should be pumped in untilall of the old grease has been expelled.
Use LimitationsDow Corning White EP Bearing Greasemay not be appropriate for lubricationunder exceptionally severe operatingconditions, or where chemical influ-ences or temperature extremes arelikely.This product is neither tested norrepresented as suitable for medicalor pharmaceutical uses.
Storage/Useable LifeWhen stored at or below 90°F (32°C),Dow Corning White EP Bearing Greasehas a useable life of 60 months fromdate of manufacture by Dow Corning.
Available PackagingDow Corning White EP Bearing Greaseis available in 0.525-oz (15-g) pillowpacks, 14.1-oz (400-g) cartridges, 35-lb(15.9-kg) pails, and 120- and 400-lb(54.4- and 181.4-kg) drums.
MOLYKOTE® Longterm W 2High Performance Grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
White lubricating grease for metal/metal combinations with slow to fast movements and medium loads
Standard Unit Result
APPLICATION
• Used successfully for bearings in machinery used in the food and pharmaceutical industries, in textile and paper making machines, domestic appliances and mechanical precision instruments.
Color White
Consistency, density, viscosityNLGI consistency class 2DIN 51 818Worked penetration 265-295mm/10ISO 2137Density at 20°C 0.9g/mlISO 2811Base oil viscosity at 40°C 125mm²/sDIN 51 562
TemperatureService temperature -30 to 110
+130 for short periods°C
Drop point >=180°CISO 2176Low temperature torque test at -20°CASTM-
D-1478-80Initial break-away torque 125x10ª³NmTorque after 20 minutes running time 44x10ª³Nm
Load-carrying capacity, wear protection, service lifeFour-ball testerWeld load 2400NDIN 51 350 pt.4Wear scar under 800N load 1.4mmDIN 51 350 pt.5FAG roller element bearing tester FE 9, 1500/6000-110, F‡}
155hDIN 51821-02-A
SpeedDN value¹ 450000mm/min
Corrosion protectionSKF-Emcor methodDIN 51 802Degree of corrosion 0-1
Oil separation - evaporationOil bleeding, 24h, 100°C 3.3%Oil evaporation, 24h, 100°C 0.5%
1. DN values are calculated approximations and will vary widely with temperature, load and bearing type.
FEATURES
Good load-carrying capacity•
Suitable for long-term lubrication since it has no tendency to oxidize
•
Wear protection through solid lubricants
•
Good adhesion strength due to incorporated adhesion improver
•
Good corrosion protection (corrosion step 0-1 in the SKF-Emcor test)
•
Prevents the formation of frictional corrosion
•
COMPOSITION
Mineral oil•
Lithium soap•
Solid lubricants•
Adhesion improver•
HOW TO USE
How to apply
Clean the contact areas. Apply with brush, spatula, grease gun or automatic lubricating device. Can be used in central lubrication systems.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
05/01/1998
DC 2910Ref. no. 71-0147A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
Product Information
High Performance Lubricants Molykote® G-0010
Multipurpose Bearing Grease
Multipurpose Polyurea-thickened bearing grease
APPLICATIONS �� Electrical motors
�� Fan bearings
�� Water pump bearings
�� Dryers in chemical and paper industries
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard Test Unit Value
Color Green
Base oil type Mineral oilThickener type Polyurea
ASTM D 217
Consistency, Viscosity
Consistency NLGI Class 2
Worked Penetration mm/10 265 - 295ASTM D 445 Base oil viscosity @ 40°C mm²/s 125
Temperature
Service temperature range (est.) °C -30 to +170
°F -20 to +340ASTM D2265 Dropping point °C (°F) > 260 (> 525)
FTMS 791C-321.2
Oil Separation/Evaporation
Oil separation (24 hrs/ 100°C) Mass-%
2.3
Evaporation loss (24 hrs/ 100°C) Mass-% 0.1
Load Carrying Capacity, Wear Protection, Speed
ASTM D 2596 Four Ball Tester Weld load kg 315ASTM D 2266 Wear scar under (40 kg; 75�C; 1 hr) mm 0.60
Dn value (DR x rpm; estimated) 400 MASTM D 1743 Corrosion prevention 1, 1, 1 Pass
ASTM: American Society for Testing and Materials FTMS: Federal Test Methods
FEATURES
��Wide temperature range
��Extreme Pressure lubrication
��Excellent corrosion-preventive
properties
��Shear resistant
COMPOSITION ��Modern polyurea
thickener
��Mineral base oil
��Corrosion inhibitor
DESCRIPTION Molykote® G-0010 is a mineral
oil-based grease thickened by a di-urea
system. Molykote® G-0010 offers excellent
low temperature properties and load-carrying
characteristics. Molykote® G-0010 provides
premium rust prevention and due to its
polyurea thickener superior shear and
oxidation stability.
HOW TO USE Apply using conventional grease application methods, i.e., clean brush, grease gun and manual or automated dispensing equipment.
HANDLING PRECAUTIONS Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
USABLE LIFE AND STORAGE When stored between 0 and 40°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING This product is available in 400g cartridges, 16kg pails, and 180kg drums.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTAL INFORMATION To support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Molykote® G-0010 Multipurpose Bearing Grease June 18, 2003
We help you invent the future is a trademark of Dow Corning Corporation.
Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3280-01 FPH 35597 ~2003 Dow Corning Corporation. All rights reserved.
MOLYKOTE® Longterm 2 plusHigh Performance Grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Lubricating grease for metal/metal combinations with slow to medium-fast movements especially with high loads
Standard* Unit Result
APPLICATIONS
• Used successfully for bearings, spline profiles and clutches in highly stressed motor vehicles, tractors, cranes, earth-moving machines, conveyor belts and forklift trucks.
• Also where there is a risk of fretting corrosion, groove formation (Brinell effect) or moisture.
Color Black
Consistency, density, viscosityNLGI consistency class 2DIN 51 818Worked penetration 265-295mm/10ISO 2137Density at 20°C 0.9g/mlISO 2811Base oil viscosity at 40°C¹ 265mm²/sDIN 51 562
TemperatureService temperature -25 to +110, short
period +130°C
Drop point >=175°CISO 2176Low temperature torque test at -20°CASTM-
D-1478-80Initial break-away torque 420x10ª³NmTorque after 20 minutes running time 35x10ª³Nm
Loading capacity, wear protection, service lifeFour-ball testerWeld load 3800NDIN 51 350 T.4Wear scar under 800N load 1.0mmDIN 51 350 T.5Almen-Wieland machineOK load 20000NFrictional force with OK load 3200NFAG roller element bearing tester FE 9, 4500/6000-110, F‡}
100hDIN 51 82102A
SpeedDN value 250000mm/min
ResistanceOxidation resistance, pressure drop 100h, 99°C
0.3barDIN 51 808
Corrosion protectionSKF-Emcor methodDIN 51 802Degree of corrosion 0-1
FEATURES
High load-carrying capacity•
Suitable for long-term lubrication•
In mixed friction it provides wear protection due to solid lubricants and EP (extreme pressure) additives
•
Good adhesion strength•
Good protection against corrosion•
COMPOSITION
Mineral oil•
Lithium soap•
Solid lubricants•
EP additive•
Corrosion inhibitor•
Adhesion improver•
TYPICAL PROPERTIES (continued)
TestStandard* Unit Result
Oil separationStandard test 1.7%DIN 51 817
1. Calculated viscosity value of base oil mixture.* ASTM: American Society for Testing and MaterialsISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
HOW TO USE
How to apply
Clean points of contact. As is usual with lubricating greases, apply by means of a brush, spatula, or automatic lubrication device. Can be used in central lubrication systems.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
30/11/1998
DC 2943Ref. no. 71-0076B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
Product InformationHigh PerformanceLubricants
FEATURES• Handles wide temperature range,
high speeds and heavy loads• Very good low temperature torque
COMPOSITION• Polyolester grease with lithium
complex thickener• NLGI #2 Grease
DESCRIPTIONMolykote® BG 20 High Perform-ance Synthetic Grease is a syntheticcomplex grease with outstandingproperties including a wide temper-ature range estimated at -45 to 182°C(-50 to 360°F) and a high load-carrying
capacity. It combines the most impor-tant properties of silicone grease (widetemperature range) and solid lubricant-containing organic greases (high load-carrying capacity) in an ester-basedgrease.
Molykote® BG 20 HighPerformance Synthetic Grease
Synthetic grease handles high speed, high load, hightemperature combinations
APPLICATIONS• Advantageous in applications that experience high temperatures and extreme
pressure or high speed, such as ball bearings of electrical motors, fans, calenders,presses, metal working machines, generators, utility switch contacts, spindles,dryers or other applications
TYPICAL PROPERTIESSpecification Writers: Please contact your local Dow Corning sales office or your GlobalDow Corning Connection before writing specifications on this product.
Method Test Unit ResultColor BeigeOil Base EsterBase Oil Viscosity, at 38°C (100°F) SUS 200Thickener Lithium complexSpecific Gravity 1.01
ASTM D 217 Penetration, worked 60 mm/10 270Service Temperature Range, estimated °C (°F) -45 to 182 (-50 to 360)
ASTM D 566 Dropping Point °C (°F) >300 (>572)ASTM D 1264 Water Washout percent 2Fed Std 791C Oil Separation,
24 hr at 150°C (302°F) percent 2.2ASTM D 2596 Four-Ball Test, Weld Load kg 265ASTM D 2266 Four-Ball Test, Wear Scar, 1 hour at
75°C (167°F), 400 N mm 0.87Dn Value (shaft size of bearing in
mm x rpm), estimated 550,000Almen-Wieland Machine OK Load N 20,000
ASTM D 1478 Low Temperature Torque Test-20°C (-4°F) N•m 207 x 10-3
-50°C (-58°F) N•m 530 x 10-3
ASTM D 1478 Low Temperature Torque Test, after 20 minute run-20°C (-4°F) N•m 130 x 10-3
-50°C (-58°F) N•m 130 x 10-3
FAG Bearing Test, angular contact thrust ball bearings160°C (320°F), 1500 N, 6000 rpm hours 662
DIN 51802 Corrosion Protection, SKF Emcor rating 1-21Dn values are calculated approximations and will vary widely with temperature, load and bearing type.
Printed in USA Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 25-379e-01 AGP4934 ©1992, 1998, 2000 Dow Corning Corporation. All rights reserved.
HOW TO USEApply Molykote BG 20 HighPerformance Synthetic Grease like anyother grease. Follow instructions ofbearing manufacturers. For optimumperformance, Molykote BG 20High Performance Synthetic Greaseshould not be mixed with other greases.
HANDLING PRECAUTIONSPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED IN THIS DOCUMENT.BEFORE HANDLING, READPRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESEN-TATIVE, OR DISTRIBUTOR, ORBY CALLING YOUR GLOBALDOW CORNING CONNECTION.
USABLE LIFE ANDSTORAGEMolykote BG 20 High PerformanceSynthetic Grease has a shelf life of60 months from date of manufacture.Refer to product packaging for “UseBy” date.
PACKAGINGMolykote BG 20 High PerformanceSynthetic Grease is supplied in tubes, cartridges, and pails.
LIMITATIONSThis product is neither tested nor reresented as suitable for medical or phrmaceutical uses.
SHIPPING LIMITATIONSNone.
WARRANTYINFORMATIONThe information contained herein isoffered in good faith and is believed
to be accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fully satisfactoryfor the intended end use.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment. Your exclusive remedyfor breach of such warranty is limitedto refund of purchase price or replace-ment of any product shown to be otherthan as warranted. Dow Corning speci-fically disclaims any other express orimplied warranty of fitness for a par-ticular purpose or merchantability.Unless Dow Corning provides youwith a specific, duly signed endorse-ment of fitness for use, Dow Corningdisclaims liability for any incidental orconsequential damages. Suggestions ofuse shall not be taken as inducementsto infringe any patent.
�������� 0 ����������
���(��( ��!7��( ���) *����� �����"��* ����" ��8�����!� -�!7�>������! ��8����!��* ��)�8���!��� .�� (�!������(�!�� .���!�����"�� 7��'% ���"� �! ���- !� .��! �)��"�
������������� "������ ���� ��� ������ ������ @ ���� ������ @ ����� @ ������ ����� @ ���� K�� @ ���� @ ���� ���� ���� ���� @ �� � � �������� ��� � ���� ��
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ����(�!�� $��! 1����
8�������� 4���,
L"� = (((- ������� 0���,�� 1- ��� 3 ���%- (1$ � (6$
#�'" ��� (
L"� = (((- ���� ��� / %&$
������� ��������� ����% / �*- � %*-
L"� = (((- 4���� 0%--/ (. ���� 3 > (�-
L"� = (((- B�������� 066/ (( ���� 3 > -�(
L"� = (((- );����� �� � ��� 066/ %-- ���� 3 9�� -�-*
L"� = (((- !��� �� ��� 0*&/ �% ����3 > %�-
����� ���� ���� � )= ���� # *%$-
!��� ��� 0% ����@ &--#3 �� %�(
�"# $%&(%�-(�8 28' ������ � @ ��� 2B6
01---���@ %*-/ @ .$--#3 ���� .-
�# ����� ����� .$-@---
���� �� �� � ��� �
8��9 �%+.* C������ ����� �� % 0#��3
�=2 B���� � - 0#��3
%� I� � %$-/ ��� ��� ������ �� ����?L"�� L���� � "�� ���� �������8��9� 8������ ������ ��� �� �� �� 9������ ��"#���� ��� "�� ��� #����
�����"��! ��.��(�!���
���������������
���$ ��
� �������� ���� ������� ���������� B;���� ��� �� ���� ��������������
� '��� �;����� �� � ���� � ������� ��������� ���� ������ ����� � � �������� � ����� ��� ����
� E����� ����� �������� ���� �� � ���� �������� ����� �� �� � ���� ����� ����� ����� ��
�����������
� 9����� ���� ������ ���� ����� ������� � B� ������� � ���� �� �������
+�, �� $�� ��� ��� �� ����� 8 � � ������ ��������� ���� � @ ����� �� ������ ��� �� � ��� �@ �����@ ��������� ��������� �������
� �� � �� � �� � � ������F����������� � ���
+��/���� � ���$�������� ������ ��� ������ �� ,� ����� � !��� ���� �:����� � ��� ��� ��� ������ �� �������" �� ��� �� ���� ��� ,� ����� @ ���������� �� � ������������ ���� �� ��, ������� ���� ����� ���� !� � ��� ��������� �����������
$��0�� ��� ��/��� ���!�� ����@ ������ � � ����@ ���,����� �� ������@ �� � � ���� ���� ��60 ��� ���� �� ��� �� ���������
������������ ������ � ��������� � %,� �� 0%- �� ��� �3 �� %1,� ���� �
8I�")#
%� ��� ������� � �� ������ ���������� ����� @ � ��������������� � 8� ��������� ��� �� ������ ���� � �� ������ ��������� �;����� � ������� ��������������� � ������ ���������@��������� @ �� ���� ������ � ��(� #� ������� ��� ���� �� ����������� �� ������ � �� ��������� ���� ���� �������� �� ������*� ��� ������ �� ��������� ������ ���� � �@ �� � � ����� ���� � � ������� �:�����@������������� ������ @ ���.� 4� ��� � ���� �� ������� ������� ��� 09���3 �� ������ �������� �� ������ ������ � ��$� ��� ��� ���� 8 ��@ ���@������ ���������� �� ��� ���� �� �������
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 4E( ��� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -$�-+�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� &-�*%-.�-% � ..(- J(--( ��� ���� ��������� 8�� ���� �� ������
Product InformationRelease Agents
FEATURES• Complies with FDA regulations for
incidental food contact; complieswith FDA 21 CFR 175.300
• Remains stable over a widetemperature range
COMPOSITION• Heat-stable silicone compound
Dow Corning® 316Silicone Release Spray
Release agent and lubricant for many food and industrialapplications
APPLICATIONSFor food and beverage industry processing:• Reduces build-up on heat seal bars, resulting in increased heat transmission and
sealing speed; reduced package discoloration; reduced cleaning time• Releases evaporated milk and powdered milk from evaporator and preheater
tubes• Reduces adhesion of residues on heating coils and cooking kettles• Lubricates sliding doors on display cases, refrigerator and freezer door gaskets• Helps prevent seizing and jam-ups of conveyor guide rails and scrambler tables• Facilitates the release of frozen vegetables and fruits from tray and freezer
filling spouts• Reduces adhesion of dried foods (dates, tea cubes, etc.) to drying trays and
large cheese wheels to storage shelves• Hastens the removal of dried food from stove burners and ovens; helps prevent
adhesion of grease; makes cleaning stainless steel fixtures and counter topseasier
• Helps prevent glasses from sticking to cooling cones of glass frostingequipment
• Helps sugar release from processing and packaging equipment such as guides,dispensing chutes, table tops, and drying trays
In high-speed rotary letterpress printing:• Increases metal release from tail sheets• Allows saw blades, saw tables, and storage trays to work more smoothly• Reduces sticking of conveyors, pulleys, and valves
In the bindery industry:• Reduces build-up on glue pots and paste jars• Makes tables and cutter surfaces slippery, so paper magazines, books, and
bundled newspapers can be handled easiercontinued on next page
TYPICAL PROPERTIESSpecification Writers: Please contact your local Dow Corning sales office or your GlobalDow Corning Connection before writing specifications on this product.
Test Unit ResultColor ClearDrying time minutes Approx. 3Flash Point (Bulk) °C (°F) 42 (108)Density (Bulk), at 25°C (77°F) g/mL 0.75
For flexography applications:• Helps prevent ink from creeping
onto idle rollers used in printinggift wrap, multi-wall bags, andsimilar applications
In addition to specific industry-relateduses, Dow Corning® 316 SiliconeRelease Spray also:• Helps prevent glue from adhering
to walls of containers; makes iteasier to remove dried glue fromequipment
• Lubricates dispensing valves,package and coil chutes ofautomatic vending machines
• Promotes removal of hosiery fromboarding forms
• Makes ironing easier by reducingfriction on hand irons and pressingequipment
• Provides for smooth, easy cuttingand reduces binding when appliedto the cutting edges of tools;reduces clogging of saw teeth whensawing gummy woods ornonferrous metals
• Provides for smoother, fastermaterials handling on chutes,tables, and rollers
DESCRIPTIONDow Corning 316 Silicone ReleaseSpray is a heat-stable, silicone anti-stick agent. Effective in solving awide range of sticking or adhesion
problems, it can be used in manyindustries.
The silicone film formed byDow Corning 316 Silicone ReleaseSpray resists breakdown due to oxida-tion, which can leave carbonaceousresidues or gummy surfaces. Oncedried, it has low volatility at tempera-tures up to 199°C (390°F).
HOW TO USEDow Corning 316 Silicone ReleaseSpray should be applied to cleansurfaces. Clean off any surface residuewith a fine emery cloth or scouringpowder until the surface is shiny; thenwipe with a clean cloth moistened withsolvent to remove dirt and abrasiveparticles.
Methods of application vary, dependingupon the size, accessibility, and com-plexity of the unit to be processed orpackaged. Usually, Dow Corning 316Silicone Release Spray is sprayed in alight film.
Approximately three minutes dryingtime should be allowed. Dow Corning316 Silicone Release Spray can alsobe buffed onto metal surfaces with ahand buffer. Only a thin film is neededfor effective release. This film shouldbe restored as required.
Freshly cleaned heat-sealing units,such as irons and bars, should bebroken in at full operating temperaturefor a short period after applyingDow Corning 316 Silicone ReleaseSpray. After any excess has beenwiped off, the unit is ready for use.
NOTE: Because Dow Corning 316Silicone Release Spray has such awide range of uses, securing orincluding complete information onthose uses, such as reapplicationschedules and amount to use, is imprac-tical. For this reason, the suitability ofDow Corning 316 Silicone ReleaseSpray should always be tested beforeit is adopted for regular use.
SolubilityDow Corning 316 Silicone ReleaseSpray is insoluble in water, ethanol,acetone, glycol, and glycerin. It can bedispersed in naphtha.
NOTE: When using any solvent,always provide adequate ventilation.Follow precautions on solventcontainer label.
CAUTIONDow Corning 316 Silicone ReleaseSpray should not be applied tosurfaces that will later be painted,since it may interfere with theadhesion of the paint.
FDA/USDA STATUSDow Corning 316 Silicone ReleaseSpray complies with FDA 21 CFR175.300 covering resinous and poly-meric coatings, subject to end usercompliance with applicable total extrac-tives limitations. It is also acceptablefor use in federally inspected meat andpoultry plants (previously designatedby USDA H-1 status).
HANDLING PRECAUTIONSThis product contains a flammablesolvent. Do not spray in a confinedspace where the possibility of sparkignition exists. This or similar situa-tions could result in a flammabilityhazard.
PRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED IN THIS DOCUMENT.BEFORE HANDLING, READPRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESENTATIVE,OR DISTRIBUTOR, OR BY CALLINGYOUR GLOBAL DOW CORNINGCONNECTION.
USABLE LIFE ANDSTORAGEWhen stored at or below 35°C (95°F),Dow Corning 316 Silicone ReleaseSpray has a shelf life of 60 monthsfrom date of manufacture. Refer toproduct packaging for “Use By” date.
PACKAGINGDow Corning 316 Silicone ReleaseSpray is supplied in 284-g (10-oz)aerosol cans, 454-g (16-oz) pump spraycontainers, and 14.1-kg (5-gal) pails.
LIMITATIONSThis product is neither tested norrepresented as suitable for medical orpharmaceutical uses.
SHIPPING LIMITATIONSDOT Classification: Dow Corning 316Silicone Release – Combustible liquid;Dow Corning 316 Silicone ReleaseSpray – Flammable gas.
WARRANTYINFORMATIONThe information contained herein isoffered in good faith and is believed tobe accurate. However, because
conditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fullysatisfactory for the intended end use.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment. Your exclusive remedyfor breach of such warranty is limitedto refund of purchase price orreplacement of any product shown tobe other than as warranted. DowCorning specifically disclaims anyother express or implied warranty offitness for a particular purpose ormerchantability. Unless Dow Corningprovides you with a specific, dulysigned endorsement of fitness for use,Dow Corning disclaims liability forany incidental or consequentialdamages. Suggestions of use shall notbe taken as inducements to infringeany patent.
Printed in USA Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 10-729A-01 AGP4934 ©1997, 2000 Dow Corning Corporation. All rights reserved.
Product InformationHigh PerformanceLubricants
FEATURES• Maintain serviceable consistency
from -70 to 400°F (-57 to 204°C)• Practically nonvolatile• Odorless• Resistant to a wide range of
chemicals; generally resistant tomineral oils, vegetable oils, air,dilute acids, alkalines and mostaqueous solutions; Dow Corning111 Valve Lubricant & Sealant isquite resistant to a variety oforganic and inorganic chemicals
• Moisture resistant• Electrically insulating• Excellent rubber lubrication• Excellent release and sealing
properties• Resistant to oxidation• Essentially nontoxic and non-
melting• Show little tendency to dry out in
service
COMPOSITION• Greaselike materials containing
an inert amorphous silica filler incombination with selectedpolydimethyl silicone fluids
Dow Corning® 7 ReleaseCompound, Dow Corning® 4 ElectricalInsulating Compound and Dow Corning®
111 Valve Lubricant & Sealant
Dimethyl silicone compounds for a variety of lubrication andprotection applications
USESDow Corning ® 7 Release Compound can be used in applications including:• Mold release agent for foundry shell and core molds• Break-in treatment for bladders on tire presses• Rubber lubricant and preservative• Release agent for adhesives and glues• Airframe lubricant• Cable-pulling lubricant to draw rubber-covered cable through conduit• Release agent for plastic extruders and processing equipment• Release agent for plastic film packaging machines
Uses of Dow Corning® 4 Electrical Insulating Compound include:• Moisture-proof seal for aircraft, automotive and marine ignition systems
and spark plug connections• Waterproof electrical connections• Electrical assemblies and terminals• Seal and lubricant for cable connectors, battery terminals, rubber door
seals and rubber and plastic O-rings• Assembly lubricant for various metal-on-plastic and metal-on-rubber
combinations• Lubrication for control and pressure plug valves
Dow Corning® 111 Valve Lubricant & Sealant can be used in applications such as:• Sealant for vacuum and pressure systems• Sealant for outdoor equipment, including shipboard applications, subject
to washing and harsh environments; meters; electrical service entranceand underground connections
• Damping medium for dash pots in electrical and electronic equipment• Chemical barrier coating• Antistick and sealant for transformer gaskets and equipment enclosures,
which help prevent gaskets from sticking to metal and resist weatheringand water washout
• Lubricant for rubber and plasticO-rings (see Use Limitations)
• Sealant for gaskets and seals• Lubricant for water softener and faucet valves• Valve stem lubricant for potable water• Aircraft vacuum systems
1Follow solvent manufacturer’s recommended safehandling instructions and applicable federal, stateand local regulations.
DESCRIPTIONDimethyl silicone compounds comein three basic consistencies:
• Light – Dow Corning 7 ReleaseCompound
• Medium – Dow Corning 4Electrical Insulating Compound
• Heavy – Dow Corning 111 ValveLubricant & Sealant
LISTINGS/SPECIFICATIONSThese compounds are permittedfor food contact use under FDARegulation 21 CFR 175.300, cover-ing polymeric coatings applied ascontinuous film over a metal sub-strate. Additionally, these compoundsare listed under NSF Standard 51for use in food processing equip-ment and NSF Standard 61 for usein potable water applications.
Dow Corning 4 Electrical InsulatingCompound is designed to meet therequirements of SAE AS 8660.
HOW TO USEFor best results, clean and drysurfaces before application.
Dow Corning silicone compounds canbe applied by hand, by speciallydesigned automated equipment, orby brushing or wiping. When usingsome high pressure dispensingequipment, separation and compac-tion can occur. Certain designs ofgrease guns may seize with siliconecompounds; test prior to using.
Where a thinner consistency isneeded, the compound can bedispersed in a solvent and appliedby brushing or spraying.1
USE LIMITATIONSThese specific Dow Corningcompounds should not be applied:• To any surface that will be
painted or finished. Suchcoatings may not adhere to the
silicone-treated surfaces. Ifcontaminated by a siliconecoating, parts can be wiped orwashed with solvent or washedwith detergent.
• To O-rings or other componentsmade of silicone rubber becausethey can deteriorate the siliconerubber. These compounds willalso slightly swell natural butylrubbers. Any rubber should betested for excessive swell orshrink.
Because each application may varyin chemical composition, pressure,flow velocity, relubrication require-ments and equipment design, thesilicone compound should be testedbefore adopting for regular use.
These compounds are not intended foruse with liquid oxygen or other strongoxidizing chemicals and should not beused in applications requiring LOXcompatibility.
These products are neither tested norrepresented as suitable for medical orpharmaceutical uses.
SHIPPING LIMITATIONSNone.
STORAGE AND SHELF LIFEWhen stored at 77°F (25°C), theseDow Corning silicone compoundshave a shelf life of at least 60 monthsfrom date of manufacture. Refer toproduct packaging for “Use By” date.
PACKAGINGThese Dow Corning silicone com-pounds are supplied in 5.3-oz (150-g) tubes, 8-lb (3.6-kg) cans, 40-lb(18.1-kg) pails and 440-lb (199.6-kg)drums.
Dow Corning 111 Valve Lubricant &Sealant is also available in 14.1-fl oz(400-g) cartridges.
SAFE HANDLINGINFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESENTATIVE,OR DISTRIBUTOR, OR BY WRITINGTO DOW CORNING CUSTOMERSERVICES, OR BY CALLING(989) 496-6000.
LIMITED WARRANTYINFORMATION - PLEASEREAD CAREFULLYThe information contained herein isoffered in good faith and is believed tobe accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fullysatisfactory for the intended end use.Suggestions of use shall not be takenas inducements to infringe any patent.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment.
Your exclusive remedy for breach ofsuch warranty is limited to refund ofpurchase price or replacement of anyproduct shown to be other than aswarranted.
DOW CORNING SPECIFICALLYDISCLAIMS ANY OTHER EXPRESSOR IMPLIED WARRANTY OFFITNESS FOR A PARTICULARPURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMSLIABILITY FOR ANY INCIDENTALOR CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THEFUTURE.™
www.dowcorning.com
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
Method Test Unit ResultDow Corning Dow Corning
Dow Corning 4 Electrical 111 Valve7 Relase Insulating Lubricant &
Physical Compound Compound SealantCTM1 0176 Color White, White, White,
translucent translucent translucentCTM 0191 NLGI #1 #2 #3
Penetration, worked 60 270 240 205worked 100,000 322 279 217
CTM 0033A Bleed, 24 hr/392°F (200°C) percent 6.5 4.5 0.05CTM 0033A Evaporation, 24 hr/392°F (200°C) percent 0.8 1.4 1.1
Service Temperature Range °F (°C) -40 to 400 -70 to 400 -40 to 400(-40 to 204) (-57 to 204) (-40 to 204)
Melting Point None None NoneCTM 0022 Specific Gravity at 77°F (25°C) 1.0 1.0 1.0
FDA Recognition, 21 CFR 175.300 Yes Yes Yes
ElectricalCTM 0112 Dielectric Constant,
at 100 Hz 2.85 2.98 2.88at 100 kHz 2.83 3.01 2.95
CTM 0112 Dissipation Factor,at 100 Hz <0.0001 0.0001 0.0001at 100 kHz <0.0001 <0.0002 <0.0005
CTM 0114 Dielectric Strength, 50 mil gap volts/mil >450 >450 >450Volume Resistivity at 73°F (23°C) ohm-cm 2.8 x 1015 1.1 x 1015 2.17 x 1015
CTM 0171 Arc Resistance seconds 126 130 1241CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request.
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as abasis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning CustomerService in Midland, MI. Call (989) 496-6000.
Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 71-448k-01 FPH 29249 ©1996, 1999, 2002 Dow Corning Corporation. All rights reserved.
Product InformationHigh PerformanceLubricants
FEATURES• Maintain serviceable consistency
from -70 to 400°F (-57 to 204°C)• Practically nonvolatile• Odorless• Resistant to a wide range of
chemicals; generally resistant tomineral oils, vegetable oils, air,dilute acids, alkalines and mostaqueous solutions; Dow Corning111 Valve Lubricant & Sealant isquite resistant to a variety oforganic and inorganic chemicals
• Moisture resistant• Electrically insulating• Excellent rubber lubrication• Excellent release and sealing
properties• Resistant to oxidation• Essentially nontoxic and non-
melting• Show little tendency to dry out in
service
COMPOSITION• Greaselike materials containing
an inert amorphous silica filler incombination with selectedpolydimethyl silicone fluids
Dow Corning® 7 ReleaseCompound, Dow Corning® 4 ElectricalInsulating Compound and Dow Corning®
111 Valve Lubricant & Sealant
Dimethyl silicone compounds for a variety of lubrication andprotection applications
USESDow Corning ® 7 Release Compound can be used in applications including:• Mold release agent for foundry shell and core molds• Break-in treatment for bladders on tire presses• Rubber lubricant and preservative• Release agent for adhesives and glues• Airframe lubricant• Cable-pulling lubricant to draw rubber-covered cable through conduit• Release agent for plastic extruders and processing equipment• Release agent for plastic film packaging machines
Uses of Dow Corning® 4 Electrical Insulating Compound include:• Moisture-proof seal for aircraft, automotive and marine ignition systems
and spark plug connections• Waterproof electrical connections• Electrical assemblies and terminals• Seal and lubricant for cable connectors, battery terminals, rubber door
seals and rubber and plastic O-rings• Assembly lubricant for various metal-on-plastic and metal-on-rubber
combinations• Lubrication for control and pressure plug valves
Dow Corning® 111 Valve Lubricant & Sealant can be used in applications such as:• Sealant for vacuum and pressure systems• Sealant for outdoor equipment, including shipboard applications, subject
to washing and harsh environments; meters; electrical service entranceand underground connections
• Damping medium for dash pots in electrical and electronic equipment• Chemical barrier coating• Antistick and sealant for transformer gaskets and equipment enclosures,
which help prevent gaskets from sticking to metal and resist weatheringand water washout
• Lubricant for rubber and plasticO-rings (see Use Limitations)
• Sealant for gaskets and seals• Lubricant for water softener and faucet valves• Valve stem lubricant for potable water• Aircraft vacuum systems
1Follow solvent manufacturer’s recommended safehandling instructions and applicable federal, stateand local regulations.
DESCRIPTIONDimethyl silicone compounds comein three basic consistencies:
• Light – Dow Corning 7 ReleaseCompound
• Medium – Dow Corning 4Electrical Insulating Compound
• Heavy – Dow Corning 111 ValveLubricant & Sealant
LISTINGS/SPECIFICATIONSThese compounds are permittedfor food contact use under FDARegulation 21 CFR 175.300, cover-ing polymeric coatings applied ascontinuous film over a metal sub-strate. Additionally, these compoundsare listed under NSF Standard 51for use in food processing equip-ment and NSF Standard 61 for usein potable water applications.
Dow Corning 4 Electrical InsulatingCompound is designed to meet therequirements of SAE AS 8660.
HOW TO USEFor best results, clean and drysurfaces before application.
Dow Corning silicone compounds canbe applied by hand, by speciallydesigned automated equipment, orby brushing or wiping. When usingsome high pressure dispensingequipment, separation and compac-tion can occur. Certain designs ofgrease guns may seize with siliconecompounds; test prior to using.
Where a thinner consistency isneeded, the compound can bedispersed in a solvent and appliedby brushing or spraying.1
USE LIMITATIONSThese specific Dow Corningcompounds should not be applied:• To any surface that will be
painted or finished. Suchcoatings may not adhere to the
silicone-treated surfaces. Ifcontaminated by a siliconecoating, parts can be wiped orwashed with solvent or washedwith detergent.
• To O-rings or other componentsmade of silicone rubber becausethey can deteriorate the siliconerubber. These compounds willalso slightly swell natural butylrubbers. Any rubber should betested for excessive swell orshrink.
Because each application may varyin chemical composition, pressure,flow velocity, relubrication require-ments and equipment design, thesilicone compound should be testedbefore adopting for regular use.
These compounds are not intended foruse with liquid oxygen or other strongoxidizing chemicals and should not beused in applications requiring LOXcompatibility.
These products are neither tested norrepresented as suitable for medical orpharmaceutical uses.
SHIPPING LIMITATIONSNone.
STORAGE AND SHELF LIFEWhen stored at 77°F (25°C), theseDow Corning silicone compoundshave a shelf life of at least 60 monthsfrom date of manufacture. Refer toproduct packaging for “Use By” date.
PACKAGINGThese Dow Corning silicone com-pounds are supplied in 5.3-oz (150-g) tubes, 8-lb (3.6-kg) cans, 40-lb(18.1-kg) pails and 440-lb (199.6-kg)drums.
Dow Corning 111 Valve Lubricant &Sealant is also available in 14.1-fl oz(400-g) cartridges.
SAFE HANDLINGINFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESENTATIVE,OR DISTRIBUTOR, OR BY WRITINGTO DOW CORNING CUSTOMERSERVICES, OR BY CALLING(989) 496-6000.
LIMITED WARRANTYINFORMATION - PLEASEREAD CAREFULLYThe information contained herein isoffered in good faith and is believed tobe accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fullysatisfactory for the intended end use.Suggestions of use shall not be takenas inducements to infringe any patent.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment.
Your exclusive remedy for breach ofsuch warranty is limited to refund ofpurchase price or replacement of anyproduct shown to be other than aswarranted.
DOW CORNING SPECIFICALLYDISCLAIMS ANY OTHER EXPRESSOR IMPLIED WARRANTY OFFITNESS FOR A PARTICULARPURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMSLIABILITY FOR ANY INCIDENTALOR CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THEFUTURE.™
www.dowcorning.com
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
Method Test Unit ResultDow Corning Dow Corning
Dow Corning 4 Electrical 111 Valve7 Relase Insulating Lubricant &
Physical Compound Compound SealantCTM1 0176 Color White, White, White,
translucent translucent translucentCTM 0191 NLGI #1 #2 #3
Penetration, worked 60 270 240 205worked 100,000 322 279 217
CTM 0033A Bleed, 24 hr/392°F (200°C) percent 6.5 4.5 0.05CTM 0033A Evaporation, 24 hr/392°F (200°C) percent 0.8 1.4 1.1
Service Temperature Range °F (°C) -40 to 400 -70 to 400 -40 to 400(-40 to 204) (-57 to 204) (-40 to 204)
Melting Point None None NoneCTM 0022 Specific Gravity at 77°F (25°C) 1.0 1.0 1.0
FDA Recognition, 21 CFR 175.300 Yes Yes Yes
ElectricalCTM 0112 Dielectric Constant,
at 100 Hz 2.85 2.98 2.88at 100 kHz 2.83 3.01 2.95
CTM 0112 Dissipation Factor,at 100 Hz <0.0001 0.0001 0.0001at 100 kHz <0.0001 <0.0002 <0.0005
CTM 0114 Dielectric Strength, 50 mil gap volts/mil >450 >450 >450Volume Resistivity at 73°F (23°C) ohm-cm 2.8 x 1015 1.1 x 1015 2.17 x 1015
CTM 0171 Arc Resistance seconds 126 130 1241CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request.
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as abasis for your specifications. They may be obtained from any Dow Corning Sales Office, or from Dow Corning CustomerService in Midland, MI. Call (989) 496-6000.
Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 71-448k-01 FPH 29249 ©1996, 1999, 2002 Dow Corning Corporation. All rights reserved.
MOLYKOTE® D 321 RAnti-friction Coating
High Performance
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• For metal/metal combinations with slow to medium fast movements and high loads.
• Suitable for the permanent lubrication of highly stressed sliding guides with low sliding speeds, oscillating movements or intermittent operation.
• Improving the running-in process and for lubrication under high vacuum and at extreme temperatures.
• Used successfully for cylinder-head bolts, toaster guides, car mirror adjustment mechanisms, high voltage switches, for the running-in of highly stressed gear wheel.
• Emergency lubricant for parts of the rotor head of wind energy installations and for groove-free cold extrusion of steel.
Color Grey-black
Physical propertiesViscosity at 20°C (DIN3 cup) sDIN 53211/3Density at 20°C 1.07g/mlDIN 53217/2Nonvolatile content 29%CTM 0242 IStorage life 24months
TemperatureCuring time 5/23min/°CService temperature range -180 to +450°C
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ b =4500
p=12500s=6800
NASTM-D2625
LFW-1, rotating¹ b = 212ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutes
p=146
no. of revolutions x1000 to μ=0.1 s=306LFW-1, oscillating¹ b = 178ASTM-D2714F=900N, frequency=89.5osc./minutes p = 400no. of oscillations to μ=0.08 s = 362
FEATURES
Air drying•
Avoidance of stick-slip•
High ageing resistance•
COMPOSITION
Solid lubricants•
Solvents•
Binder•
TYPICAL PROPERTIES (continued)
TestStandard* Unit Result
Coefficient of frictionPress-Fit test, μ = 0.075
1. Surface pretreatment: b = blank, p = phosphated, s = sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE D 321 R Anti-Friction Coating. Phosphatization or sandblasting (180 grit) increases the adhesion and service life.
How to apply
Stir the Anti-Friction Coating thoroughly before applying by spraying or brushing.
Recommended dry film thickness:5 to 20μm.
Curing
5 minutes at 23ºC
Solubility
Thinning can be carried out using MOLYKOTE® L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, MOLYKOTE D 321 R Anti-Friction Coating has a usable life of 24 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as
warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
13/11/1998
DC 2904Ref. no. 71-0219A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® PG 75High Performance Grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Lubricating grease for plastic/plastic and plastic/metal combinations with slow to medium-fast movements and light loads
Standard Unit Result
APPLICATION
• Used on vehicle track-rod joints.
Color Beige
Consistency, density, viscosityNLGI consistency class Approx. 2DIN 51 818Worked penetration 270-300mm/10ISO 2137Density at 20°C 0.86g/mlISO 2811Base oil viscosity at 40°C 32mm²/sDIN 51 562
TemperatureService temperature -40 to +130°CDrop point >190°CISO 2176Low temperature torque test at -30°CASTM-D147880Initial break-away torque 222x10ª³NmTorque after 20 minutes running time 36x10ª³NmKesternich method - flow pressure at -20°C
280mbarDIN 51 805
Load-carrying capacity, wear protection, service lifeFour-ball tester (VKA)Weld load 1300NDIN 51 350 pt.4Wear scar under 400N load 0.8mmDIN 51 350 pt.5
Coefficient of frictionSteel ball against plastic surface (POM) dia (ball) = 12.7mm; load = 5N; v = 10cm/s, 24h, μ=
0.02
Corrosion protectionSKF-Emcor methodDIN 51 802Degree of corrosion 1-2
Oil separation - evaporationStandard test 4.8%DIN 51 817Oil bleeding, 24h, 100°C 2.4%FD 791-32/2Oil evaporation, 24h, 100°C 0.2%FD 791-32/2
FEATURES
Suitable for long-term lubrication•
Good low temperature characteristics (usable down to -40°C)
•
Very low coefficient of friction•
Compatible with many plastics and elastomers
•
COMPOSITION
Mineral oil•
Polyalphaolefine•
Lithium soap•
Solid lubricants•
HOW TO USE
How to apply
Clean points of contact. Apply in same way as lubricating greases, using brush, spatula, grease-gun or automatic lubricating device. Suitable for delivery by central lubricating system. In the event of long breaks in service e.g. overnight, the pressure in the delivery equipment should be relieved. Not to be mixed with other greases.
Because of variation in quality of plastics and elastomers, compatibility tests should be carried out for swelling and shrinkage, stress-crack formation, and changes in strength and hardness.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
30/11/1998
DC 3000Ref. no. 71-0171B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
High Performance Lubricants MOLYKOTE®EM-60L
Grease
FEATURES Lubricating grease developed for plastic components
APPLICATIONS � Automobiles, electrical appliances, precision equipment, audio equipment, and office
equipment that have plastic parts. � Components requiring lubrication at low torques and low temperatures.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard* Parameter Unit Result Appearance White Base oil viscosity at 40ºC mm²/s 18 JIS K 2220 Penetration (worked 60 times) 325 NLGI class 0 Service temperature range ˚C -60 to 130 Density g/cm³ 0.88 JIS K 2220 Drop point ˚C 195 JIS K 2220 Bleed (100ºC 24 hours) % 5.0 JIS K 2220 Evaporation (99ºC 22 hours) % 0.3 JIS K 2220 Oxidation resistance (99ºC 100 hours) MPa 0.02 JIS K 2220 Copper corrosion (100ºC 24 hours) 1a ASTM D 2596 Four ball weld load (1500rpm/1minute) N 3140 ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) mm 0.77 JIS K 2220 Low temperature torque test (-40ºC) Starting torque mNm 39 Running torque mNm 20 *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials.
HOW TO USE Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONSThis product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 250ºC, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
� Compatible with most plastics
� Can be used for plastic-plastic contact, metal-metal contact and plastic-metal contact
� Long service life
� Low seepage, so it can be used in places wherein cleanliness is required
� Does not contain silicone thereby preventing problems with contact point failures
COMPOSITION� Polyalfaolefin (PAO)
� Lithium soap
� PTFE, etc.
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 10/10/2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3081A-01 �2006 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGINGThis product is available in 1kg cans (10 cans/case) and 15kg pails.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
High Performance Lubricants MOLYKOTE®EM-50L
Grease
FEATURES Lubricating grease developed for plastic components
APPLICATIONS � Automobiles, electrical appliances, precision equipment, audio equipment, and office
equipment that have plastic parts. � Used as a damper grease to reduce noise in moving parts such as gears.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard* Parameter Unit Value Appearance Translucent White Base oil viscosity at 40ºC mm²/s 1050 JIS K 2220 Penetration (worked 60 times) 325 NLGI class 1 Service temperature range ˚C -40 to 150 Density g/cm³ 0.84 JIS K 2220 Drop point ˚C 195 JIS K 2220 Bleed (100ºC24 hours) % 2.5 JIS K 2220 Evaporation (99ºC22 hours) % 3.0 JIS K 2220 Oxidation resistance (99ºC100 hours) MPa 0.02 JIS K 2220 Copper corrosion (100ºC 24 hours) 1A ASTM D 2596 Four ball weld load (1500rpm/1minute) N 1400 ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) mm 0.71 JIS K 2220 Low temperature torque test (-40ºC) Starting torque mNm 290 Running torque mNm 140 *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials.
HOW TO USE Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONSThis product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
� Compatible with most plastics
� Effective in reducing noise from plastic gears
� Long service life
� Low seepage, so it can be used in places wherein cleanliness is required
� Does not contain silicone thereby preventing problems with contact point failures
COMPOSITION� Poly-±-olefin
� Lithium soap
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 10/10/2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3105A-01 �2006 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGINGThis product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
�������� �� 6=�������� ������
+�*7 )��.��(���� *����� .�� )���!��9)���!��& )���!��9(�!�� ��"��88��9(�!�� ��(8���!���� ��'��'��* ���- !� (�"��(�.��!(�'�(��!� ��" ��*7! !� (�"��( ���"��*�
������������� ������� ��� ��������� ��� ��� ��� � ������ ������ �� ���� �� I �� � ���,� ��� �� @ ���,��������� ����� ��� @ ��� ����, �� ��� @ ������� ����� �� �� @ ��������� ���,��@ ����� ����� �� � ���������� ������ �� �� ��� ������ �� �� ��� ��� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� !���
������!���%& /����!%& 1������!%
�"# $% &%& #�'" �� � ��� ��� (�*
"�) (%*+ !��,�� ������� ���%- (.$�(+$
"�) (&%% �� �� � (-/ 01&/23 ���� %�-(
�"# $% $1( 4� � ��� �� �� �� � ($/ 0++/23 ��(� (--
��()���!���
������� ��������� / �$- � 5%&-
/2 �$& � 5*$1
"�) (%+1 ������� ��� / 7($-
/2 7.&(
8��9 �%.+&&- ��� ��������� ��:�� � �$-/ 0�$&/23
"���� ����,����� ��:�� #� Q%(-;%-�*
���:�� ���� (- ���� ���� ��� #� Q6-;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ��� � �$-/ 0�$&/23 ���� Q&--
����!����& ���������
�"# $% &-& );����� �� � ���@ ��� ��� ���� ���� %--�@66/ 0(%-/23
��� -�%
�"# $% &-( �=2�B���� ����� �� ������� -�%
���..�����! �. .���!���
���� ���� ���� ��� �� ������ 0�)93R ���� O %(�+��@ ���� O 1�*#@ � O %-��� @���� ��� (.�@ NO
N Q-�-.
? �"#� ��� ��� "�� ��� #����"�)� "������� ������� ��� )���� ����
�����"��! ��.��(�!���
���������������
���$ ��
� C��� �;����� �� � ���� ��� ���������� !��� ������ ��������� �����$-/ � %&-/ 0�$&/2 � *$1/23
� '��� ��� ��������� ����������� ��� ��������� �� ������� <��� ���� ����� �� �������� B;����� ����������� ��� �� ��� �� �� ������
�����������
� ������� �� � ���� ������ ������; ���,���� B� ������� � ����� �������
+�, �� $�� ��� ��� �� ����� 8���� � ������ � ��������� ���� � @ � ����� �@ ����� �� ������� ���������������� � �� � �� � �������������� � �� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������ ������ �F� � ������� ��������� ������ �F� ����� �� ���������� ���� ���� ��� ���� ��� ������ �� ��� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B �' $. ������� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( %&�%(�(--( ��� ���� �� 9)�A=)�B ��� ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%**B�-% � ..(( J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
�������� �� ��������� ������
+�*7 )��.��(���� *����� .�� )���!��9)���!�� ��" )���!��9(�!����(8���!���� ��'��'��* ���- !� (�"��(�.��! (�'�(��!� ��"��*7! !� (�"��( ���"��*�
������������� ������� ��� ������ ���� ��� ��� � ������ ������ �� ���� ��������� � ����� ���������� ������ � ���� ��������� �����
� I �� � ����� ����� @ ���� ���� @ ������ �� �� @ ��������� @ ������� ������ ��� �� ��� � ���� �� �������� @ �� �� ��������� �������� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� !���
������!���%& "����!%& '������!%
�"# $% &%& #�'" �� � ��� ��� (
"�) (%*+ !��,�� ������� ���%- (1$�(6$
"�) (&%% �� �� � (-/ 01&/23 ���� -�61
�"# $% $1( 4� � ��� �� �� �� � ($/ 0++/23 ��(� (--
��()���!���
������� ��������� / �$- � 5%6-
/2 �$& � *+.
"�) (%+1 ���� ��� / ($-
/2 .&(
8��9��%.+&&- ��� ��������� ��:�� � � �(-/ 0�./23
"���� ����,����� ��:�� #� *6;%-�*
���:�� ���� (- ���� ���� ��� #� %$;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ��� � �(-/ 0�./23 ���� (%-
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # %1--
����!����
�"# $% &-& );����� �� � ���@ ��� ��� ���� %--�@66/ 0(%-�(/23
��� -�%
��������� )��!��!���
�"# $% &-( �=2�B���� �����
������ �� ����� �� -
�����"��! ��.��(�!���
���$ ��
� C��� �;����� �� � ���� !��� ������ ��������� �����$-/ ��$&/2 0%6-/ �*+./23
� C��� ���� �� � ���� B;����� ����� �� �������� �������� ��� ��� ��� �� ����� ����
�����������
� ������� ���� ������ ������; ���,���
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��� ��)���!���
�"# $% &%+ ������ � > .�$
? 8��9� 8������ ������ ��� �� �� �� 9������ �8�� ����� ���� ��������� �� �� �����
+�- !� �))�% ��� ��� �� ����� 8���� � ������ � ��������� ���� � @ � ����� �@ �����@ ���� ���� �� ���������������� ������� ������� ����������� �� ����� ��������� � ���" �� ��� �� ��� ����, � ������@���� �������@ �� ��� ��� � ���������� �:����� ����� �� ���������#� � �� ��;�� ��� ���� ���� � �
4���� � �� ������� � :����� ����� �� �� ��� ���� @ ������������ ����� �� ������� �� ��� �������� ���,���@ �� �����, �������@�� ����� � ���� �� ����� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B �' (% ������� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (&�-%�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%%%��-% � (66- J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
High PerformanceLubricants MOLYKOTE®YM-103
Grease
FEATURES Lubricating grease developed for plastic components
APPLICATIONS � Automobiles, electrical appliances, precision equipment, and office equipment. � Can be used with plastic-on-plastic, metal-on-metal, or plastic-on-metal friction parts.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard* Parameter Unit Result Appearance Yellow Base oil viscosity at 40ºC mm²/s 29 JIS K 2220 Penetration (worked 60 times) 300 NLGI class 1 to 2 Service temperature range ˚C -45 to 150 Density g/cm³ 0.90 JIS K 2220 Drop point ˚C 195 JIS K 2220 Bleed (100ºC 24 hours) % 3.0 JIS K 2220 Evaporation (99ºC 22 hours) % 0.2 JIS K 2220 Oxidation resistance (99ºC 100 hours) MPa 0.02 JIS K 2220 Copper corrosion (100ºC 24 hours) 1a ASTM D 2596 Four ball weld load (1500rpm/1minute) N 5200 ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) mm 0.40 JIS K 2220 Low temperature torque test (-40ºC) Starting torque mN.m 93 Running torque mN.m 49 *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials.
HOW TO USE Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONSThis product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 200ºC, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
� Compatible with most plastics
� Good load carrying capability and wear resistance
� Long service life
� Low seepage, so it can be used in places wherein cleanliness is required
COMPOSITION� Poly-±-olefin
� Lithium soap
� Special solid lubricants
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 10/10/2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3099A-01 �2006 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGINGThis product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
High PerformanceLubricants MOLYKOTE®EM-30L
Grease
FEATURES Lubricating grease developed for plastic components
APPLICATIONS � Automobiles, electrical appliances, precision equipment, audio equipment, and office
equipment that have plastic parts.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard* Parameter Unit Value Appearance White Base oil viscosity at 40ºC mm²/s 90 JIS K 2220 Penetration (worked 60 times) 325 NLGI class 1 Service temperature range ˚C -45 to 150 Density g/cm³ 0.91 JIS K 2220 Drop point ˚C 195 JIS K 2220 Bleed (100ºC24 hours) % 5.0 JIS K 2220 Evaporation (99ºC22 hours) % 0.4 JIS K 2220 Oxidation resistance (99ºC100 hours) MPa 0.02 JIS K 2220 Copper corrosion (100ºC 24 hours) 1A ASTM D 2596 Four ball weld load (1500rpm/1minute) N 3730 ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) mm 0.5 JIS K 2220 Low temperature torque test (-40ºC) Starting torque mNm 110 Running torque mNm 51 *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials.
HOW TO USE Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONSThis product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 250ºC, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
� Compatible with most plastics
� Can be used for plastic-plastic contact, metal-metal contact and plastic-metal contact
� Long service life
� Low seepage, so it can be used in places wherein cleanliness is required
� Does not contain silicone thereby preventing problems with contact point failures
COMPOSITION� Poly-±-olefin
� Lithium soap
� PTFE, etc.
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 10/11/2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3106A-01 �2006 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGINGThis product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
MOLYKOTE® TP 42Grease paste
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Light-colored adhesive grease-paste with solid lubricants for metallic friction combinations
Standard* Unit Result
APPLICATIONS
• Sliding surfaces exposed to high pressure loadings and subject to the influence of water of metal machining emulsions.
• Recommended and successfully used by leading clamping-element manufacturers, especially for chucks on metal processing machines.
Color Light beige
Penetration, density, viscosityUnworked penetration 265-300mm/10ISO 2137Density at 20°C 1.19g/mlISO 2811
TemperatureService temperature¹ -25 to +250°CDrop point 125°CISO 2176Low temperature torque test at -20°CASTM-
D-1478-80Initial break-away torque 224x10ª³NmTorque after 20 minutes running time 59x10ª³NmKesternich method - flow pressure at -20°C
740mbarDIN 51 805
Load-carrying capacity, wear protection, service lifeFour-ball tester (VKA)Weld load 3000NDIN 51 350 pt.4Wear under 800N load 0.9mmDIN 51 350 pt.5Almen-Wieland machineOK load 20000NFriction force 1710N
Coefficient of frictionPress-Fit test μ = 0.09
ResistanceWater resistance, static 2-90DIN 51 807 pt.1
Corrosion protectionSKF-Emcor methodDIN 51 802Degree of corrosion 0-1
FEATURES
High load-carrying capacity•
Particularly adhesive•
Particularly resistant to wash-out by water and metal machining emulsions
•
Prevents stick-slip•
Good corrosion protection•
Excellent protection against galling•
COMPOSITION
Mineral oil•
Synthetic oil•
Lithium soap•
Solid lubricants•
Adhesion improver•
TYPICAL PROPERTIES (continued)
TestStandard* Unit Result
Oil separation - evaporationOil separation, standard test 1.5%DIN 51 817
1. Thermal stability of solid lubricant.* ASTM: American Society for Testing and Materials.ISO: International Standardisation Organisation.DIN: Deutsche Industrie Norm.
HOW TO USE
How to apply
The sliding surfaces should be cleaned. The paste should then be applied with a suitable brush, rag or grease gun. It should not be mixed with greases or oils.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
30/11/1998
DC 3632Ref. no. 71-0160B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
Product Information
High Performance Lubricants Molykote®
P-1900
Food Grade Paste
FEATURES
Light-colored, grease-paste with solid lubricants.
APPLICATIONS � Lubrication of mechanical components in Food & Beverage processing equipment.
Sliding surfaces and friction contacts exposed to heavy loads, especially at low to
medium speeds.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales office or your Global Dow Corning
Connection before writing specifications on this product.
Standard Property Unit Value
Color White
Consistency, Density, Viscosity
DIN 51818 NLGI Consistency Class 1
Unworked penetration mm/10 290 - 340
ISO 2811 Density at 20°C g/ml 1.11
DIN 51562 Base oil viscosity at 40°C mm2/s 85
Temperature
Service temperature range °C -30 to +300
Load carrying capacity, wear protection,
speed
DIN 51350 T4 Four ball tester, weld load N 3200
DIN 51350 T5 Four ball tester, wear scar under 800N load mm 0.90
Coefficient of friction
Screw test (Erichsen); coefficient of friction in
bolt connection M 12 8.8;
μ thread
μ head
0.10
0.10
Screw test (Erichsen); coefficient of friction in
bolt connection M12, material no. 1.4301
μ thread
μ head
0.11
0.11
Initial breakaway torque at 300°C / 21 hours
with material no. 1.7709 (starting torque M =
56 Nm)
Nm 85
Press-Fit test, μ = 0.10
no chatter
Resistance
DIN 51807 T1 Water resistance, static 1 - 90 * CTM: Corporate Test Method, copies of CTM’s are available on request.
* DIN: Deutsches Institut fuer Normung.
� Meets FDA Regulations 21 CRF
178.3570 and NSF H1 Classification for
incidental food contact
� Low coefficient of friction
� Good water resistance
� High load carrying capacity
BENEFITS
� Mineral oil
� Aluminum complex thickener
� Solid lubricants
DESCRIPTION Molykote® P-1900 is a mineral oil
based food grade paste, which meets
FDA regulations 21 CRF 178.3570
and NSF H1 classification for
incidental food contact. Molykote ®
P-1900 offers excellent low coefficient
of friction and high load carrying
capacity
HOW TO USE
The contact points should be cleaned,
wherever possible. Paste should be
applied using a suitable brush. It can
be delivered by a grease gun. Excess
lubrication does not harm.
HANDLING PRECAUTIONS Product safety information required for
safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection
USABLE LIFE AND
STORAGE Molykote®
P-1900 has a usable life of
60 months when stored at or below
20°C in the original unopened
containers.
PACKAGING Molykote® P-1900 is available in
400g cartridges, 1kg cans, 25kg pails
and 180kg drums.
Samples are available in 1kg cans.
.
LIMITATIONS This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND ENVIRONMENTAL
INFORMATION To support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Suggestions of use shall not be taken
as inducements to infringe any patent.
Dow Corning's sole warranty is that
the product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® P-1900 Food Grade Paste September 24, 2003 Dow Corning is a registered trademark of Dow Corning Corporation.
Ref. No. 80-3219-01 FPH 37189 �2003 Dow Corning Corporation. All rights reserved.
MOLYKOTE® P-40��!���.��� �"7���'� ��8����!��* )��!�
��!���.��� �"7���'� ��8����!��� )��!� -7��7 ��� 8� ���" .�� �������(8�% ��" ���!������ ��8����!��* D�8�& )��!�������% !7����>)���" !� �������'� ��'����(��!� ���7 �� �)���7 -�!�� ��7�(�"�!%
������������� 8 ����� �� ������� ������ @ ���� ��� @ ����� �� ������ �� ����� ���������� ��� ������ ��� � ���,� � �� @ � ���,� ��� @ �������� � 8;�� �� ���������� ������� @ ��� �� ���� ������ �)�� '��� �9���� ��������� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
���! ��!7�"# ����(�!�� $��! 1����
���� Yellowish Brown������!���%& '������!%
"�) (%*+ I���,�� ������� ���%- *%-�*$-
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23 ��(� 360��()���!���
������� ���������
� � �� �� / �.- � 5(*-
/2 �.- � 5..1
� ���� ������� � / �.- � 5%(--
/2 �.- � 5(%6(
��� ��� 4�� 8' �
� ��������� � �*$/ 0�*%/23 .
�"# $% &-$ =� ����� ����� � ���� ��� ��� � �*-/ 0�((/23
���� 61-
�"# (%+1 ���� ��� / #��
/2 #��
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # *---
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� -�6.
2���� ����� �� � ������ � �� ($;%-1
���..�����! �. .���!���
��� �2� � @ N O -�%(
����� � � N �����% -�%1
����� � � N ����% -�-&
�E< )����� ) ������� ������� � @ NO( -�%*
�����"��! ��.��(�!���
���������������
���$ ��
� B;����� ���� ��� '��� ����� �� �������� '��� ���� �� � ���� '��� �������� 8 ����� �� ������ ���������� 9��������� ��� ���� ������� ���
������� � ��� ���� :���!����";���! ��!7�"# ����(�!�� $��! 1����
��������� )��!��!���
�"# $% &-( �=2�B���� ����� � ������ �� ����� �� -
��� ���� � � $--
%� �������� �� ������ � ����� ������@ 9%( ; %�+$@ ������� &�&@ ����,����(� ����� *--#@ ���:����� $-CF@ ��������� -�$��@ (�? "�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�%��� ����� ������ ����� �� ���������� �� � ����� �� �� ������� ��� � ������ ��� �@ ��� �� ���� � ��� " ����� � �� ��;�� ��� ���� � ����� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B � .- 9�������� ���� ��� ��������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-(.1C�-% � *&(6 J%66&�(--( ��� ���� ��������� 8�� ���� �� ������
Product Information
Specialty
Lubricants Molykote®
G-0050 FG/G-0051FG/G-0052FGWhite E.P. Bearing Grease
FEATURES Multi purpose food grade grease
APPLICATIONS Multi purpose lubrication of mechanical components such as bearings, chains, gears and
slides in food and beverage processing facilities.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales office or your Global Dow Corning
Connection before writing specifications on this product.
Test Property Unit G-0050 G-0051 G-0052
Color White White White
DIN 51
818
NLGI Consistency 0 1 2
ASTM
D217
Penetration mm/
10
370 325 280
ISO
2811
Density at 20ºC g/ml 0.89 0.89 0.89
ASTM
D 445
Viscosity @ 40ºC cst 70 70 115
Service temperature ºC
ºF
-17 to +150
0 to +302
-17 to +150
0 to +302
-12 to +150
0 to +302
ASTM
D2265
Drop point ºC
ºF
216
420
232
450
246 475
ASTM
D2596
Four-ball weld load N 2940 2940 2940
ASTM
D2266
Four-ball wear scar mm 0.8 0.8 0.8
ASTM
D1264
Water wash-out, 175ºF % 15 10 8
Fed 791 Oil bleed, 24 hrs @ 100ºC % 5 3 3
Fed 791 Oil evaporation, 24 hrs @
100ºC
% 2.0 2.0 2.0
ASTM: American Society for Testing and Materials ISO: International Standardization Organization DIN: Deutsche Industrie Norm
HOW TO USE Clean points of contact. Molykote®
White E.P. Bearing Grease can be
applied by hand packing, hand
operated grease gun, automatic
greasing systems and central
lubricating systems. When lubricating
antifriction bearings, follow the
bearing manufacturers instructions.
For plain bearings the new grease
should be pumped in until old grease
is flushed from system.
Excellent lubricating properties
Good resistance to water washout
High load carrying capacity
Compatible with many plastics or elastomers
Meets FDA Regulation 21 CFR 178.3570 and H1 classification for incidental food contact
Available in NLGI consistency class 0, 1 and 2
COMPOSITION
Mineral oil
Aluminum complex thickener
EP/AW additives
01/18/2005 Dow Corning is a registered trademark of Dow Corning Corporation.
Ref. No. 80-3254A-01 2002 Dow Corning Corporation. All rights reserved.
DESCRIPTIONMolykote® White E.P. Bearing
Greases are high performance
lubricants designed for the food and
beverage industry. They are a mineral
based lubricant thickened with
aluminum complex and fortified with
EP additives. Applications include
bearings, gears, chains and sliding
mechanisms in manufacturing
processes. They are an excellent
choice where NSF H1 status lubricant
is required or when the product must
be free of black particle contamination.
HANDLING PRECAUTOINS Product safety information required for
safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com.
USABLE LIFE AND
STORAGE When stored at or below 32°C (90°F)
in the original unopened container, this
product has a usable life of 60 months
from date of production
PACKAGINGThis product is available in cartridges,
pails and drums.
LIMITATIONS This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATIONTo support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLY The information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Suggestions of use shall not be taken
as inducements to infringe any patent.
Dow Corning's sole warranty is that
the product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THE
FUTURE.™
www.dowcorning.com
MOLYKOTE® 7400Anti-friction Coating
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• Sliding coating of metal/metal combinations with slow to moderately fast movements and high loads.
• Suitable for improving the running-in of gearboxes, sliding bearings and sliding guides.
• Maintenance-free, permanent lubrication of highly stressed friction combinations with low speeds or oscillating operation, in which the use of oil or grease, for design construction reasons is not possible, or because of the unacceptable risk of soiling.
• For running-in car transmission shafts, for the maintenance-free, permanent, non-soiling lubrication of threaded sleeves of car seat adjusting mechanisms, and for the cold working of steel.
Color Dark grey
Physical propertiesViscosity at 20°C (DIN4 cup) 24sDIN 53211/4Density at 20°C 1.16g/mlDIN 53217/2Nonvolatile content 30%CTM 0242 IpH at 20°C 8CTM 0007 AStorage life 12months
TemperatureDrying time at 20°C 15minutesCuring time 40/23min/°CCuring time 10/50min/°CCuring time 5/90min/°CService temperature range -70 to +200°C
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ p=11300
s=7900NASTM-D2625
LFW-1, rotating¹ p=343ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutesno. of revolutions x1000 to μ=0.1LFW-1, oscillating p=76F=900N, frequency=89.5osc./minutesno. of oscillations to μ=0.08
FEATURES
Free from flammable solvents•
Water-based, environmentally friendly
•
High load-carrying capacity•
Low coefficient of friction•
COMPOSITION
Solid lubricants•
Inhibitor•
Organic binder•
Water•
Stabilisers•
TYPICAL PROPERTIES (continued)
TestStandard* Unit Result
Fretting corrosion - Deyber tester 10x10¦
1. Surface pretreatment: p=phosphated, s=sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE 7400 Anti-Friction Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm.
Curing
40 minutes at 23°C,10 minutes at 50°C,5 minutes at 90°C (Object temperature).
Solubility
Thinning can be carried out using distilled water or tap water.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored between -10°C and 40°C in the original unopened containers, this product has a usable life of 12 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically
disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
16/11/1998
DC 2912Ref. no. 71-0073B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
��������
�� �)�" ��������" ��8�����! )��!�
����" ��8����!��* )��!� -�!7 )��!�������% ��- .���!��� ���..�����!.�� ����(8�% ��" ������*��� �. (�!����� ��()����!�
������������� ������� ��� �� ��� ��� �������� �� ��� ��� �� ������ ����� @ � ������� ������� ��� �� ������ �� ���� @ � ������ ��������� �������� ����� ����� ��� ������ � ���� �� ������ ������ ���@� ���� � ��� �������@ ���� �� �����������
� I �� � �������� ������� ����� @ ����� ��� @ ��� ������@ ���� ������@����� ���� @ ���� @ ���� @ ����� � ������ ��� @ � ���� � ��� �������� �� ������ ������ @ ������ @ ����� ����� �� ��� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,
������!���%& "����!%
I���,�� ������� ���%- ($$�(+$
�� �� � (-/ 01&/23 ���� %�.-
��()���!���
������� ��������� ���� / �*$ � 5.$-
/2 �*% � 5&.(
���"�����%��* ��)���!%
�"# $% *$- ��. 2�������� � ��
!��� ���� # $*--
8��� !����� ������ )= ���� # 7(----
���..�����! �. .���!���
" ����� ������ 9%(@ &�& �������,��� ������ 0B���� � � ��3@
� N ����� -�%-
� N ���� -�-1
��� �2� � @ N -�-$@ � �����
����!����
�"# $% &-+ ��% !��� �� � ���@ ���@ �������� %�6-
? �"#� ��� ��� "�� ��� #���
+�, �� $��+�- !� �))�% ��� �� ����� ������ �� �������� @ �� ����� �� � ��� � ��� �@����@ ����� ���� �� ������������ �� � � � � �;�� � ���
���� � ���������� <������ �������� ���� ������ ���� ����������� ��� �� � ��; ��� ���� � ����� �
�����"��! ��.��(�!���
���������������
���$ ��
� ��� ������ ���������� C��� ��� ������ ����� �������� ����� ��F��� �� ������ ������ � ��,� ���� E����� ������� �� ����� ����� ��� 2������� �� � ������ '��� ��������� ������� �������� ��������������
�����������
� 9����� ���� ����� �������
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B '�E���� ��� ����� ������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�--&. �-% � (6*% J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
�������� /2���!�
��*7!�������" *������)��!� -�!7 ����" ��8�����!� .�� ����(8�% ��"���*�!��( ��8����!��� �. (�!����� ��()����!�
������������� ������ ������ �� ������ ���� �;�� �� � ����� ���� @ ��:����� M����M���������@ � �������� � ��� � ������ ���� �
� I �� ���� �����@ ��� �;�����@ � ��� ������ ���� �� ��������� ������ �� �������� @ ���,���� �� ������ ��������@ ����� �� � ���� @�������� � ���� ��� �� �������� ��� ��@ � ���� � � �;��� �� ��� �� ����� �� ���������
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� !���
������!���%& "����!%& '������!%
"�) (%*+ I���,�� ������� ���%- (&$�*%$
"�) (&%% �� �� � (-/ 01&/23 ���� %�%
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23% ��(� %%-
��()���!���
������� ��������� / �($ � 5%($
/2 �*% � 5($+
8��9 ��%.+&�&-
��� ��������� ��:�� � � �(-/ 0�./23
"���� ����,����� ��:�� #� %(.;%-�*
���:�� ���� (- ���� ���� ��� #� 1*;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ��� ��(-/ 0�./23
���� (--
���"�����%��* ��)���!%& -��� )��!��!���
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # .&--
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� -�+$
8����!����� ������
)= ���� # (----
2������� ����� # %$1-
���..�����! �. .���!���
��� �2� � N O -�%-@ � ����
����!����
�"# $% &-+ ��% !��� �� � ���@ ��� �������� �� (�6-
�"# $% &-& );����� �� � ���@ ��� ��� ���� ����%--�@ 66/ 0(%-/23
��� -�&
�����"��! ��.��(�!���
���������������
���$ ��
� ����������� ���� ������������ �������� '��� ������� � ��� �� ������� ����� � ���
� ����� ��,� ��� �� ��F���� '��� ����� �� �������� B;����� ������� ���� ������� ����
�����������
� 9����� ���� ������ ���� ����� ������� � ���� �� �������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��������� )��!��!���
�"# $% &-( �=2�B���� �����
������ �� ����� �� (�*
2���� ����� �� � ������ � �� 7*1;%-1
��� ��)���!���
�"# $% &%+ )�� �������@ ����� � > *�&
%� �������� �� �� �� ����� �� �� � ��� ��;����? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�%��� ���� ��� ����� �� ������@�������� �� ����� �� � ����� ��������� � �� � ������ ��� �� " �� ����������� �� � ���� � �� �� �������������� � ��� B;�� ������������ � �����
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ������� ������ ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � ��������� �� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B �P �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( %*�-6�(--( ��� ���� �� 9)�A=)�B ��� ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%*$4�-% � *1** J(--( ��� ���� ��������� 8�� ���� �� ������
�������� ��� ��$�����" ��8�����! ���!�
����" ��8�����! )��!� .�� !7� ����(8�% ��" ������*��� �. (�!����()����!�
������������� ��� ��� �������� �� ��� ��� �� ������ ����� @ � � ������ ���������� �� ������ �� �������;� �
� ������ ��������� �� ������ ����� �� ��� ����� ��� ������ �� �������� �� � ��� �������@ ���� �� ����� �����
� I �� ���� ����� ��� ��������� ������� ����� @ ����� ��� @ ����� ���� @���� �� �� �� �� ���� @ ���� @ ����� @ ���� @ ���������� ����� ���� � ��� �� ������ �� ���� �� ������ ������ @ �� ��� @ ����� @ ����� ����� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,
����!��!���& "����!%
"�) (%*+ I���,�� ������� ���%- (&-�*%-
"�) (&%% �� �� � (-/ 01&/23 ���� %�*$
��()���!���
������� ���������% / �($ � 5.$-��� ������� ��� ���� 51*-
/2 �%* � 5&.( ��� ���������� ���� 5%%11
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # (&--
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� -�+$
8����!����� ������
)= ���� # 7(----
2������� ����� # (1--
���..�����! �. .���!���
��� �2� � N O -�-&@ � ����
����� � � B���� �(
����� � � N ����� -�%(
����� � � N ���� -�-1
�����"��! ��.��(�!���
���������������
���$ ��
� C��� ������������ �������� ��� ��������� �� ������@0N O -�-6@ � ��,� ���3
� ����� �������� ����� �� �� ������ ������� ���� ��,� ���� '��� �������� �� �������� � E����� ������� �� ����� ����� ��� ��������� �� ����� ����� � � C��� ������ ������� ������� 0.-�(�,�3
�����������
� 9����� ���� ����� ������� � ����,���
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
����!����
�"# $% &-+ ��% !��� �� � ���@ ���@ �������� (�6-
%� ���������� �� � ��� �� ���� ������� �(� �������� �� ������ � ����� ������@ 9%(@ &�&@ � ����,��� �������? �"#� ��� ��� "�� ��� #����"�)� "������� ������� ��� )���� ����
+�, �� $��+�- !� �))�% ��� �� ����� ������ �� �������� @ �� ����� �� � ��� � ��� �@����@ ����� ���� �� ������������ �� � � � � �;�� � ������� � ���������� <������ �������� ���� ������ ���� ����������� ��� �� � ��; ��� ���� � ����� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � ��������� �� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B '�# ��I� ����� ������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( %*�-6�(--( ��� ���� �� 9)�A=)�B ��� ���� ���� �������, �� ��� ���� ���������
E��� �� +%�--&*4�-% � (6*- J(--( ��� ���� ��������� 8�� ���� �� ������
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
Specialty Lubricants Molykote®
Food Grade
Spray Oil
FEATURES
Multi purpose mineral oil spray for food processing equipment
APPLICATIONS � Lubrication of mechanical components in food & beverage processing
equipment
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales office or your Global Dow Corning
Connection before writing specifications on this product.
Standard Test Unit Value
Color Transparent
Viscosity DIN 51 562 Base oil viscosity at 40�C mm²/s 96 ASTM D 562 Base oil viscosity at 100�C mm²/s 11 ASTM D2270 Viscosity index of base oil 102
Temperature Service temperature range °C -10 to +120 ASTM D97 Pour point °C <-10
Load Carrying Capacity, Wear Protection, Speed DIN 51 350 Four-Ball Tester (VKA), mm 0.5 Wear Scar under 40 kg Load, 1200 rpm
Corrosion Protection
ASTM D665 Corrosion protection Pass
ASTM: American Society for Testing and Materials. DIN: Corporate Deutsche Industrie Norm. ISO: International Standardization Organization.
DESCRIPTION Molykote® Food Grade Spray Oil is a
multi-purpose mineral oil aerosol. It is
suitable for applications in the food,
pharmaceutical and similar industries.
HOW TO USE Shake well before use. Clean contact
surfaces before spraying.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
� Easy to use
� Good penetration
� High corrosion protection
� High load capability
� Meets FDA Regulation 21 CRF
178.3570 and USDA H1
Classification for incidental food
contact
� Odorless and tasteless
COMPOSITION
� Mineral oil
� Corrosion inhibitor
� EP/AW additive
� Propellant
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Food Grade Spray Oil June 23, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3197-01 FPH 35600 �2003 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored at or below 23 °C in the
original unopened containers, this
product has a usable life of 24 months
from the date of production.
PACKAGING This product is available in 400ml
spray cans.
LIMITATIONS This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND ENVIRONMENTAL
INFORMATION To support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Suggestions of use shall not be taken
as inducements to infringe any patent.
Dow Corning's sole warranty is that
the product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
Specialty
Lubricants MOLYKOTE® CO220
Oil
Chain oil
APPLICATION ��Suitable for lubrication of chains.
��Wide service temperature range
TYPICAL PROPERTIES Specification writers: These values are not intended for use in preparing specifications. Please contact your local DowCorning sales representative prior to writing specifications on this product.
Standard* Test Unit Result
Color Brownish,
transparent
Density, viscosity
DIN 51 757 Density at 20°C g/ml 0.94
DIN 51 562 Viscosity at 40°C mm²/s 220
Temperature
Service temperature ºC -10 to +250
ºF +14 to +482
Load-carrying capacity, wear protection
Four-ball tester (VKA)
DIN 51 350 pt.4 Weld load N 1800
DIN 51 350 pt.5 Wear scar under 800N load mm 0.8
Almen-Wieland machine
OK load N 18000
* DIN: Deutsche Industrie Norm
HOW TO USE
How to apply Apply with brush, oil, spray~can,
spray gun, drop~feed oiler or
conventional metering devices.
MOLYKOTE CO220 Oil can also be
applied by dipping.
HANDLING PRECAUTIONS PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOWCORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest DowCorning sales office or DowCorning distributor.
LIMITATIONS This product is neither tested nor represented as suitable for medical or
pharmaceutical uses.
FEATURES
Low evaporation •
Contains no solvents •
COMPOSITION
Synthetic oil •
Antioxidant •
EP additives •
HEALTH AND
ENVIRONMENTAL
INFORMATION To support customers in their product safety needs, DowCorning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local DowCorning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that DowCorning's products are safe, effective, and fully satisfactory for the intended end use. DowCorning's sole warranty is that the product will meet the DowCorning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. DowCorning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless DowCorning provides you with a specific, duly signed endorsement of fitness for use, DowCorning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
2 30/11/1998 ® MOLYKOTE is a registered trademark of DowCorning Corporation.
Ref. no. 71-0153B-01 DC 3006 ©1997-2001 DowCorning Corporation. All rights reserved.
Product InformationLubricants
FEATURES• Provides high-temperature
lubrication from 350 to 1000°F(177 to 538°C)
• Gives off little smoke orobjectionable odors when usedin proper amounts
• Designed to lubricate in lightlyto moderately loaded conditions
• Does not build up carbondeposits as readily as mostconventional petroleum chainlubricants
• Frequently softens hard carbon-aceous deposits caked on frompreviously used hydrocarbonlubricants
• Can be applied manually or withautomatic lubrication systems
COMPOSITION• A stable dispersion of microscopic
graphite particles in a polyalkyl-ene glycol carrier fluid
• Supplied as low-viscosity fluid• Forms solid lubricant film after
fluid evaporation
Dow Corning ® C-40 HighTemperature Chain Lubricant
Lubricant for bearings and chains exposed to hightemperatures
USESDow Corning® C-40 High Temperature Chain Lubricant has been used on avariety of high-temperature lubrication applications, including:• Oven chains lubricates in a variety of high-temperature ovens,
including heat treating, paint drying, lithographing and gypsumwallboard drying ovens
• Conveyors lubricates chains, roller bearings and ball bearings in high-temperature paint-drying tunnels, paperboard driers and heat-treatingovens
• Bearings lubricates oven cart and brick kiln car bearings
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
Method Test Unit ResultColor BlackDensity at 77°F (25°C) lb/gal 8.3
ASTM D 88 Viscosity100°F (38°C) SUS 650210°F (99°C) SUS 105
ASTM D 92 Flash Point °F (°C) 450 (232)ASTM D 97 Pour Point °F (°C) -20 (-29)Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for thisproduct and use it as a basis for your specifications. It may be obtained from any Dow CorningSales Office, or from Dow Corning Customer Service in Midland, MI. Call (517) 496-6000.
HOW TO USEDow Corning C-40 High TemperatureChain Lubricant can be used assupplied and requires no stirring. Itcan be applied manually by brushor hand oiling, as well as with suchautomatic lubrication equipment asdrop-feed, wick, brush and oil-mistsystems. Amount supplied may beadjusted to avoid smoking.
For best results, it should beapplied to surfaces under 250°F(121°C). Best operating conditions,however, are over 350°F (177°C) at
which point the polyalkylene glycol iscleanly volatized from the surface.Continuous operation between 250and 350°F (121 and 177°C) may causegumming.
AUTHORIZATIONSDow Corning C-40 High TemperatureChain Lubricant meets the require-ments of USDA H-2.
PACKAGINGDow Corning C-40 High TemperatureChain Lubricant is supplied in 1-quart, 5-gal and 55-gal (2-, 40- and450-lb) containers, net weight.
Printed in USA Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 10-746-99 AGP4480 ©1997, 1999 Dow Corning Corporation. All rights reserved.
STORAGE AND SHELF LIFEWhen stored at or below 90°F (32°C),Dow Corning C-40 High TemperatureChain Lubricant has a shelf life of60 months from date of manu-facture. Refer to product packagingfor Use By date.
USE LIMITATIONSThis product is neither tested norrepresented as suitable for medicalor pharmaceutical uses.
SHIPPING LIMITATIONSNone.
SAFE HANDLINGINFORMATIONPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED. BEFORE HANDLING,READ PRODUCT AND MATERIALSAFETY DATA SHEETS AND CON-TAINER LABELS FOR SAFE USE,PHYSICAL AND HEALTH HAZARDINFORMATION. THE MATERIALSAFETY DATA SHEET IS AVAILABLEFROM YOUR DOW CORNINGREPRESENTATIVE, OR DISTRI-BUTOR, OR BY WRITING TODOW CORNING CUSTOMERSERVICE, OR BY CALLING (517)496-6000.
A worker fills the reservoir of anautomatic oiler designed to apply oneshot of Dow Corning C-40 HighTemperature Chain Lubricant to eachconveyor bearing as it passes under-neath. The oil’s glycol carrier evapo-rates in a 530° F (277° C) bake ovenwithout leaving a residue. Thegraphite constituent of the lubricantremains to keep the bearings rollingfreely.
WARRANTY INFORMATION PLEASE READ CAREFULLY
The information contained hereinis offered in good faith and isbelieved to be accurate. However,because conditions and methods ofuse of our products are beyond ourcontrol, this information shouldnot be used in substitution forcustomer’s tests to ensure thatDow Corning’s products are safe,effective, and fully satisfactory forthe intended end use.
Dow Corning’s sole warranty isthat the product will meet theDow Corning sales specifications ineffect at the time of shipment. Yourexclusive remedy for breach of suchwarranty is limited to refund of pur-chase price or replacement of anyproduct shown to be other than aswarranted. Dow Corning specificallydisclaims any other express orimplied warranty of fitness for aparticular purpose or merchantabil-ity. Unless Dow Corning providesyou with a specific, duly signedendorsement of fitness for use,Dow Corning disclaims liability forany incidental or consequentialdamages. Suggestions of use shallnot be taken as inducements toinfringe any patent.
AV00
823
MOLYKOTE® M 55 PlusDispersion
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Black dispersion of solid lubricants in mineral oil.
Standard* Unit Result
APPLICATIONS
• Used successfully as an additive for mineral oils.
Color Black
Density, viscosityDensity at 20°C (68°F) 0.91g/mlISO 2811Viscosity 73.2s4 DIN 53 211
TemperatureService temperature Depends on the
lubricating oil used
°C
Load-carrying capacity, wear protectionFour-ball tester (VKA)Weld load 3000NDIN 51 350 pt.4Wear scar under 800N load 1.35mmDIN 51 350 pt.5
* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
FEATURES
Increases load carrying capacity•
Reduces friction and wear•
Reduces running noise•
Improves running-in•
Emergency running properties•
Prevents and reduces pitting in gears
•
COMPOSITION
Mineral oil•
Molybdenum disulphide•
Dispersant•
HOW TO USE
How to apply
Add to lubricating and gear oils in amounts of 5% by volume; 10% for particularly heavy stress. Not to be added to aqueous metalworking emulsions. Can be used in all lubrication systems, such as drip oilers, central lubricating systems, etc. Use undiluted to improve the operation of hot-boxes.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE,
PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C (68°F) in the original unopened containers, this product has a usable life of 18 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or
Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
11/12/2000
DC 3631Ref. no. 71-0149C-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® MKL-NDispersion
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Mineral oil grease with solid lubricants dispersed in solvent
Standard* Unit Result
APPLICATION
• Used for lubrication of chains.
Color Black
DensityDensity at 20°C 0.87g/ml
Load-carrying capacity, wear protectionFour-ball tester (VKA)Weld load 1200NDIN 51 350 pt.4Wear scar under 800N load 0.9mmDIN 51 350 pt.5
Corrosion protectionSKF-Emcor methodDIN 51 802Degree of corrosion 0-1
* DIN: Deutsche Industrie Norm
FEATURES
Penetration•
Adhesion•
Protection against wear•
Corrosion protection•
Ageing stability•
COMPOSITION
Mineral oil•
Inhibitors•
Adhesion improver•
Solid lubricants•
Solvents•
HOW TO USE
How to apply
Apply thinly to clean, dry surfaces using a brush. Small chains can also be dipped. The chain can be used after evaporation of the solvent (approx. 30 minutes).
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 36 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
13/11/1998
DC 3629Ref. no. 71-0220B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® 1122Chain and open gear grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Synthetic grease with solid lubricants
Standard* Unit Result
APPLICATIONS
• Used for initial lubrication of chains with hollow pins equipped with grease nipples. e.g. high tenter clamp chains in the textile industry and conveyor chains in food sterilizer units.
• Also used for gear drives and open gears, sliding bearings operating at low speeds and high temperatures, such as bearings in drying systems and calendaring machines used in various industrial processes.
Color Black
TemperatureService temperature range 10 to 160°CUnworked penetration 250-280
Load-carrying capacity, wear protection, service lifeFour-ball tester (VKA)Wear scar under 600N load 0.9mmDIN 51 350 pt.5Weld load 2600NDIN 51 350 pt.4Almen Wieland machine OK load 18000N
Density, viscosityDensity at 20°C 0.95g/mlBase oil viscosity at 40°C 1500mm²/s
* DIN: Deutsche Industrie Norm
FEATURES
Emergency lubrication•
High pressure resistance•
High wear protection•
Extremely adhesive•
Resistance against water•
COMPOSITION
Synthetic oil•
Solid lubricants•
Inorganic thickener•
Adhesion improver•
HOW TO USE
How to apply
Clean the contact areas. As is usual with lubricating greases, apply by means of a brush, spatula, grease-gun or automatic lubrication device.
Chains with hollow pins
The hollow pins should be completely packed with grease. Relubricate through grease nipples using a grease gun. DOW CORNING 1122 Chain and Open Gear Grease is effective to 160°C under these conditions.
Gears
The tooth profiles of new gears should be treated with DOW CORNING® G-n Metal assembly paste or spray and run without load for a short time to generate a basic solid lubricating film. The gears should then be lubricated with DOW CORNING 1122 Chain and Open Gear Grease in accordance with the gear manufacturer's instructions.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers MOLYKOTE 1122 Chain and Open Gear Grease has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this
information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
06/11/1998
DC 3723Ref. no. 71-0303A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® Omnigliss SprayQuick-action penetrating agent
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Quick-action penetrating agent incorporating corrosion protection, water-repellent and lubricating properties
Standard Unit Result
APPLICATIONS
• Suitable for frictional contacts, running at low to medium speeds, which are not equipped with grease nipples or oiling holes.
• Used on joints, levers, chains and other components of transport and conveyor equipment, textile machinery, automatic filling units and all types of packaging equipment.
Color Light amber
DensityDensity at 20°C 0.84g/mlViscosity at 40°C 11.8mm²/s
TemperatureService temperature -30 to +80°C
Load-carrying capacity, wear protection, service lifeFour-ball tester (VKA)Weld load 2900NDIN 51 350 pt.4Weld scar under 800N load 1.1mm
FEATURES
Good penetration•
Water repellent•
High pressure resistance•
Temporary corrosion protection•
COMPOSITION
Mineral oil•
Solid lubricants•
Corrosion inhibitors•
Stabilizer•
HOW TO USE
How to apply
Shake before use. Can be applied with brush, oil can, spray-can, hand-held or compressed-air spraying equipment, or by dipping. On badly corroded parts, allow longer to react. Repeat if necessary.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE
SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
05/01/1998
DC 3630Ref. no. 71-0173A-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® SuperglissCorrosion protective lubricant
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Lubricating oil with penetrating properties
Standard* Unit Result
APPLICATIONS
• Simplify dismantling of rusty components.
• Used as corrosion protection.
Color Bright, transparent
Density, viscosityDensity at 20°C 0.83g/mlISO 2811Viscosity at 40°C 3.6mm²/sDIN 51 562
Loading capacity, wear protectionFour-ball testerWeld load 1400NDIN 51 350 T.2Wear scar at 400N load 0.9mmDIN 51 350 T.3
Corrosion protectionSalt spray test 8hISO/R 1456
* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
FEATURES
Penetration•
Rust loosening properties•
Lubrication•
Corrosion protection•
COMPOSITION
Mineral oil•
Adhesion improver•
Solvent•
Corrosion inhibitors•
Propellant•
HOW TO USE
How to apply
Can be applied by means of a brush, oil-can or spray can or hand-operated spray equipment. When used as a corrosion protection, apply thinly and uniformly to the cleaned areas. Depending on the environmental conditions repeat the process from time to time.
HANDLING PRECAUTIONS
Spray can - Aerosol propellant: CO£. Pressurised container - protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Combustible.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
21/12/1998
DC 2948Ref. no. 71-0089B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® MultiglissDispersion
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Dispersion with penetrating properties
Standard* Unit Result
Color Transparent
Density, viscosityDensity at 20°C 0.85g/mlISO 2811Viscosity 12.5s4 DIN 53 211
Load-carrying capacity, wear protectionFour-ball tester (VKA)Weld load 1200NDIN 51 350 pt.2Wear scar under 400N load 0.72mmDIN 51 350 pt.3
* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
FEATURES
Penetration•
Rust loosening properties•
Lubrication•
COMPOSITION
Mineral oil•
Solid lubricants•
Stabilizers•
Solvent•
Corrosion inhibitor•
HOW TO USE
How to apply
Shake before use. Can be applied with brush, oil can, spray-can, hand-held or compressed-air spraying equipment, or by dipping. On badly corroded parts, allow longer to react. Repeat if necessary.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product
safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
13/11/1998
DC 3003Ref. no. 71-0230B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
��������
���C=<� �������!�
��))�� )��!� .�� ��()����!� ��8D��!�" !� 7�*7 !�()���!����&7�*7 )�������� ��" �������'� ��.�������
������������� !��� ���� ��� ��� ���� ����� ��� � �� ������� ���� ����@ ��� ������� ��@ ���� ���,� ������ � @ ����� ��� @ �;��� �� ��� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� ����� �������
������!���%& "����!%& '������!%
"�) (%*+ I���,�� ������� ���%- *(-�*+-
�"# $* (%+ �� �� � (-/ 01&/23 ���� %�-
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23 ��(� %%--
��()���!���
������� ��������� / �*- � 51$-D �� ��������� � 5*--
/2 �(( � 5%(-(D paste
�������� � 5$+(
"�) (%+1 ���� ��� / #��
/2 #��
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # ($--
�"# $% *$- ��$ !��� ����� ���� &--# ���� �� %�-
8����!����� ������
)= ���� # 7(----
���..�����! �. .���!���
��� �2� � N O -�-+
����� � �
�������� �� ������ �� ��� ������9%(@ &�&@ ����,��� ������
� N ����� -�%+
� N ���� -�%-
"���� ����,����� ��:��09%( ��� ���� ��:�� 9�O&-#� ����� ����� � *--/ �$+(/2@ (%�@ ����������� .$@ &�&@ ����� %�-$-*3
#� %%-
�����"��! ��.��(�!���
High PerformanceLubricants
���$ ��
� !��� ������ ��������� ����� '��� ��� ��� �� � ���� <��� ���� ��� �� �� � � ���� ������ ����
� '��� ����� �� �������� ��� ���������� #� ���� ���
�����������
� �������� ������� ����� ����� ���� "������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
�"# $% &-+ ��% !��� �� � ���@ ���@ �������� 1 @ 90ºC
��������� )��!��!���
�"# $( &-( �=2�B���� �����
������ �� ����� �� -
+�, �� $��+�- !� �))�%"� �� ����@ ���� ������ ����� ��������� ��� ����� �� � ��� � ��� ��� ����� B;�� ������� ��� � ���������� 9)�A=)�B ��+.*6 ��� �� � �� �� � �� � ���� � �� �������� �� ��������� � �� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B ��+.*6 ��� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%&(f�-% � *1(( J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
MOLYKOTE® P 37 Lubricant pasteSpecialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Extremely pure, solid lubricant paste for bolted joints. It contains no lead, nickel, sulphur, chlorine or fluorine
Standard Unit Result
APPLICATIONS
• Suitable for screws, nuts and bolts that are subjected to extremely high temperatures and which are made of heat-resistant or extremely heat resistant steels, eg those made from nickel-based alloys.
• Used successfully for the bolted joints of gas and steam turbines in power stations.
Color Grey-Black
Penetration, densityUnworked penetration 280-310mm/10ISO 2137Density at 20°C (68°F) 1.2g/mlISO 2811
TemperatureService temperature¹ -40 to 1400°C -40 to 2552°F
Load-carrying capacity, wear protection, service lifeWeld load 4400NDIN 51 350 T.4Wear scar under 800N load 1.7mmDIN 51 350 T.5
Coefficient of frictionScrew test - μ thread² 0.15Screw test - μ head² 0.09Initial break-away torque³ 126Nm
1. Temperature resistance of solid lubricants. 2. Coefficient of friction in bolted connection, M12 x 1.75, material 8.8, blackened. 3. M 12 x 1.75, with starting torque Ma = 56 Nm and heat treatment at 540°C (1004°F), 21 hours, bolt material: 21 Cr Mo Ni V 57 mat no. 1.7709.
FEATURES
Highly pure (less than 500mg of sulphur, less than 200mg of chlorine and fluorine per kg of lubricant)
•
Can be used at temperatures up to 1400°C (2552°F)
•
Coefficient of friction in the range of oiled bolts
•
Low scatter of prestressing force on tightening
•
Avoidance of stress cracks and solder brittleness
•
Enables non-destructive loosening of bolted joints even after long use at high temperatures
•
SPECIFICATIONSComplies with Siemens TLV 9600 02/01
•
Complies with General Electric TIL 1117-3RI
•
Complies with EDF-PMUC 04034•
Complies with Pratt & Whitney PWA-36246
•
COMPOSITION
Solid lubricants in practically sulphur free, partly synthetic oil
•
Thickener•
Adhesion improver•
HOW TO USE
How to apply
Clean the thread with solvent. Clean already used bolts with a wire brush. Spread an adequate amount of this product up to the root of the thread in order to obtain a good seal. For this purpose use the brush from the brush can, provided it has not been used previously for other purposes. Otherwise use a new brush.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your
local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
When stored at or below 20°C (68°F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.WE HELP YOU INVENT THE FUTURE.™
www.dowcorning.com
©0-2001 Dow Corning Corporation. All rights reserved.
03/09/2001
DC 2908Ref. no. 71-0244B-01
2 MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® P 37 Lubricant paste WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation.
�������� �C=��)�� ��!�����E�
����" ��8�����! )��!� ���" �� !7� ����(8�% ��" .�!!��* �. � -�"����*� �. ��()����!� ���7 �� (�!�� !7���"�" ������!����
������������� ������� ��� � ���� ���� �� ��������� � �� ��������@ ������������@ ������� �������� ��� ��@ �� � ��������@ ���� �� ��� �� ����� ���
� I �� � ����� ������ @ ����� ���� ������ @ ����� ����� ����� @ ����� ��� @ ��� ��� K�� @ �;��� ��� @ ���, ���� ����� @ ����� ������� ��� @ ���� ���� @ ���,� ������ � �� ���� ���� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
�7%����� )��)��!���
���� '���� � ����,
"�) (%*+ I���,�� ������� ���%- (&-�*%-
�"# (&%% �� �� � (-/ ���� %�(%
4� � ��� �� �� �� � .-/ ��(� 1$
������� ��������� ���� / �.- � 5(-- � ��� �@ � 5%$--��� ���������
"�) (%+1 ���� ��� / #��
2��� ��� ��� � �.-/ ���� 8����;� .--
�"# $% &%+ )�� �������@ + ��� @ .-/ > (�&
��������� )��!��!���
"�)�E %.$1 ��� ���� � � $-N� ���,� � %(-
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
�"# $% *$- ��. 2�������� � ��
!��� ���� # .&--
�"# $% *$- ��$ 2�������� � ��
!��� ��� � &--# ���� �� %�%
�E< � @ ��� )����� ���������@ ���� *--#������� � @ ������ ���������
-�%-
��� ���� � @ ��;� ���� # %(--
!��� ��� �� -�+.
���..�����! �. .���!���
��� �� N -�%.
����� � � B���� �
2����� ��������� � ��� ������9�%( ����� %�++-6
N �����N ����
-�%%+-�-+&
8���� ������ � .- �������� N �����N ����
-�%*-�-6.
�����"��! ��.��(�!���
���������������
���$ ��
� 9��������� '��� ����� �� �������� C��� ������������ �������� �������� �� ������ � �� �� �������� � ��� ����� ���
� ��� ������ �� ����� ���� ������ ������� �� �� ����,�� ��������
� !��� ������ ��������� ����� !��� �������
�����������
� ����� ������� � ������ ���� ����,���� 8��� �� �������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
+�! ����- !��!
8���� %�++-6@ 9�%( ���� . ���, � $.-/
"���� ����,����� ��:�� � ������:�� �� 1-#�
#� %%$
������ 1- �������� 9�%(@ ����, ���� ��:������ (%� � *--/
#� %(�$
����!���� �*����! -�!��
�"# $%&-+ !��� �� � ���
��� % � .-/ -
� 6-/ -�%
? "�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
�������������'����� 9��� 0)���34-.-%(1.<��, ������ $(%%(#�� 4+(%+ ������ ��� '����� B�������"� %%%+�*E" ������ ��� B�2��9I -.-*. ������ ��� ��� G !�����!8�*1(.1
+�, �� $��+�- !� �))�%"� �� ����@ ���� �� ����� �� � ����� ��� � ���� ��� �� ������ ����:��� ���� �� �� �� � � ������ ���� � ����� � ���� � ���� ���� 8 �;�� � � �������� " ������ � ���� �� �������� @ �� �� ��� � �� ��;�� ��� ���� � �� ��� �I � ���� �� � ����� � ����� �������� ���� :���,�� �� ������ ������� ���� �� ������ ���� ���� ����� � � �� ������� ��� ������F����������� � ���
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ��
�� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ � ��������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
9)�A=)�B �+. ����� 8�����F�(E��� �� +%�-*--8�-%
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B �+. ����� 8�����F�*E��� �� +%�-*--8�-%
9)�A=)�B �+. ����� 8�����F� !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
. (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-*--8�-% � *+(1 J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
�������� +�� )�������" ��8�����! )��!�
����" ��8�����! )��!�B ���!���� �� ���" �� ���A��
������������� 2�� ��������� �������� �� ��� ��K���� � ���� ��������� ���������� ���� �����@ �������� ��� ����� K�� @ ��� ���� ���� ���� �� ��,���
� ������� ��� ��������� ��� ��� ��� ���� @ ��K���� � ���� ��������� �� ����� ��� ����� @ �� �� � ��:���� � ��� �� �� � ��������� �� �������8 � ���� ������� ��� ����������� ������� ������ �
� I �� ���� ����� ��� �� ��� �� �� �� ��� ����� @ �� ��� ������������� �� ��� �� ���� @ ������ ������ � �������� �������������� ��� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� �����
����!��!���& "����!%& '������!%
"�) (%*+ I���,�� ������� ���%- ($-�(&-
"�) (&%% �� �� � (-/ 01&/23 ���� %�.
��()���!���
������� ���������% / �*- � %%--
/2 �(( � (-%(
"�) (%+1 ���� ��� / #��
/2 #��
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # .&--
�"# $% *$- ��$ !��� ��� ���� .--# ���� �� -�1
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� %�%
8����!����� ������
)= ���� # (----
2������� ����� # %+--
�����"��! ��.��(�!���
���������������
���$ ��
� � �� � �� ���� � ���� ���� �����������0�*-/ ��((/2 � %%--/ �(-%(/23
� B���� ���� ������ �� �����@��� ���� ��� � � � ���� ���������
� C��� ������������ �������� ��� � ��� ��������� �� ������@������ ���� �� �� ����� ��� �����K�� �� �� ��������
� '��� ����� �� �������� '��� ��������� ���������
�����������
� 9����� ���� ����,��� ��� � ����� ������� � 9��� ������@ 0���������3
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
���..�����! �. .���!���
����� � � B���� �(
����� � � N ����� -�%.
����� � � N ���� -�-6
"���� ����,����� ��:��* #� %(-
%� ���������� ���� �� ���� ������� (� �������� �� ������ � ����� ������@ 9%(@ &�&@ � ����,��� �������*� 9 %(@ ��� ���� ��:�� 9� O $1#� �� ��� ����� � $.-/ �%--./2@ (%�@��� �������� (% � 9�< $+ �� �� %�++-6�? "�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�%"� �� ����@ ���� �� ����� �� � ����� ��� � ���� ��� �� ������ ����:��� ���� �� �� �� � � ������ ���� � ����� � ���� � ���� ���� 8 �;�� � � �������� " ������ � ���� �� �������� @ �� �� ��� � �� ��;�� ��� ���� � �� ��� �I � ���� �� � ����� � ����� �������� ���� :���,�� �� ������ ������� ���� �� ������ ���� ���� ����� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ������
��� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B C� ��� ����� ������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-(%( �-% � (6-$ J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
�������� �@@@����" ��8�����! )��!�
����" ��8�����! )��!� .�� 8��!�" (�!�� D���!�B ���!���� �� ���" �����A��
������������� ������� ��� ����� K�� �� ��� ��K���� � ���� ��������� �� �1$-/ 0%(-(/23 �� � ����� ��� ����� @ �� �����@ ���� � ������ �� ������� �������@ ���� � �� ��������� �� �� ������� " ����� � � ����� � ���� �� �� ����� @ ������ �� ���� ��������� �� ������ �� ��������� ��� ��� ����
� I �� ���� ����� ��� ������� ���� ��� @ �FF�� ���� ���� �� ��� �� �K���������� ������ @ ����� K�� � �� �������� ��� ��@ �� �� � ��� �� � ����� �� �������� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���
����!��!���& "����!%
"�) (%*+ I���,�� ������� ���%- (&-�*%-
"�) (&%% �� �� � (-/ 01&/23 ���� %�(1
��()���!���
������� ���������% / �18 to 1093
/2 �20 to 2000
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # .&--
�"# $% *$- ��$ !��� ��� ���� .--# ���� �� -�-&
8����!����� ������
)= ���� # (----
2������� ����� # (1--
���..�����! �. .���!���
����� � � N �����( -�%*
����� � � N ���� -�-&
"���� ����,����� ��:��* #� %*$
�"# $% &-( �=2�B���� ����� %
%� ���������� �� � ��� �� ���� ������� �(� �������� �� ������ � ����� ������@ 9%(@ &�&@ � ����,��� �������*� 9 %(@ ��� ���� ��:�� 9� O 1(#� �� ��� ����� � $.-/ 0%--./23@ (%�@ ����������� �� %�++-6�? "�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
�����"��! ��.��(�!���
High PerformanceLubricants
���$ ��
� � �� � �� ���� � ���� ���� �����������0�*-/ ��((/2 � 51$-/ �%(-(/23
� C��� ������������ �������� B���� ���� ������ �� �����@��� ���� ��� � � � ���� ���������
� �������� �� ������ ������� � ������ �� ����� ��� @ ��� ���� ������ ������������ �� ��� ��� ����� �
� '��� ����� �� �������
�����������
� ����� ������� � 9����� ���� ����,���� �������� ����
+�, �� $��+�- !� �))�%"� �� ����@ ���� �� ����� �� ����� ��� � ���� ��� �� ������ ����:��� ���� �� �� �� � � �������@ ���� �� � � ��� � ����� ����� � ���� ���� " ����� � � ������ �������� @ �� �� � �� � ����;�� ��� ���� � �� ��� �
�� ����� �� ������ � �� ����������� :���,�� �� ������ � ���������� @ � � ���� ���� � � � �� �������
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ������
����� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B %--- ����� ������� �� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-(%& �-% � (6-6 J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
MOLYKOTE® PTFE-N UVAnti-friction coating
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• Suitable for rubber guides, sliding doors, furniture hinges, small mechanisms in office machines and sunroof seals.
• For nearly all material combinations such as metal/metal, plastic/metal, plastic/plastic combinations involving slow to medium movements and medium loads.
• The UV indicator enables the end user to readily inspect and confirm, using UV inspection lamps, that the product has been applied to the substrate.
Color Colorless
Physical propertiesViscosity at 20°C (DIN4 cup) 12sDIN 53211/4Density at 20°C 0.87g/mlDIN 53217/2Solid content¹ 23%Storage life 24months
TemperatureService temperature range -180 to +240°CDrying time at 20°C 5-10minCuring time 120/20min/°C
Load-carrying capacity, wear protection, service lifeLFW-1, rotating² b=6ASTM-D2714F=680 N, n=72 minª¹, v=7.9 m/minute² p=30no. of revolutions x1000 to μ=0.1² s=10
1. Calculated value. 2. Surface pretreatment: b = blank, p = phosphated, s = sand blasted.* ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm.
FEATURES
Very low coefficient of friction•
Colorless, therefore non-staining•
Detectable on the surface•
COMPOSITION
PTFE•
Binder•
Solvent•
Ultra-Violet indicator•
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE PTFE-N UV Anti-Friction Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm.
Curing
120 minutes at 20°C
Solubility
Thinning can be carried out using MOLYKOTE® L13 Thinner.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 24 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THE FUTURE.™
www.dowcorning.com
©1997-2001 Dow Corning Corporation. All rights reserved.
25/10/2001
DC 3730Ref. no. 71-0301C-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
Product InformationSpecialty
Lubricants
FEATURES• Colorless• Nonstaining
COMPOSITION• Waxlike, extreme-pressure lubricant• Supplied as liquid or aerosol;
remains as wax film after solventevaporation
Dow Corning® 557Silicone Dry Film Lubricant
Extreme-pressure, dry film lubricant provides exceptionalrelease and lubricating properties
APPLICATIONSDow Corning® 557 Silicone Dry Film Lubricant can be used:• In steel production where it can increase slitter-blade life, resulting in clean,
square edges• In aluminum production where it can lengthen the life of tools and dies,
improve surface finish, lubricate sliding surfaces and surfaces during extruding,deep drawing or spinning
• In machine shops where it can improve surface finishes; extend the life ofcutting tools, taps, dies, drills, slitters, and forming tools; reduce wear andreduce stick-slip or metal seizure on bearings, slides, cams adjusting screws,guides and ways
• For textile, paper and woodworking industries where it can reduce wear andfriction and reduce product staining from spinning frames, knives, scissors,punches, chain, conveyors or material-handling equipment
• For rubber and plastic industries where it can reduce sticking, pickup or productcontamination from handling equipment, knives, conveyors or sliding surfaces
TYPICAL PROPERTIESSpecification Writers: Please contact your local Dow Corning sales office or your GlobalDow Corning Connection before writing specifications on this product.
Method Test Unit ResultAs Supplied
Color ClearCTM1 0137A Specific Gravity 0.77
Flash Point2 °C (°F) 39 (102)Service Temperature Range3 °C (°F) -40 to 43 (-40 to 110)Drying Time minutes 30Solvent, bulk Naphtha
As AppliedAppearance Clear wax filmMelting Range °C (°F) 32-46 (90-115)Press Fit4 No stick-slip
ASTM D 2596 Four Ball Weld Load N 1200Fed Std 791a5 Four Ball Wear Scar mm 0.85
Coefficient of Friction4 0.071Corporate Test Methods (CTMs) correspond to standard ASTM tests in most instances. Copies of CTMs are availableupon request.2Bulk form only.3Estimated service temperature range based on product formulation and laboratory testing. Actual service temperaturerange is dependent on other factors including the specific application environment.4Tested on a Falex LFW-4 Press Fit tester, steel vs. steel, Rc60, 0.6-inch per minute, 12,000 psi in air, roomtemperature.5Method 6514.1.
DESCRIPTIONDow Corning 557 Silicone Dry FilmLubricant is:• An extreme-pressure lubricant with
exceptional release properties forcutting and forming metals, andwith lubricating properties forheavily loaded tracks, cams, slides,etc.
• Colorless in thin films• Nonstaining to paper or fabrics
The solvent evaporates after applica-tion, leaving a nearly transparent, thinfilm. This lubricant film begins to meltat 32°C (90°F) and adheres tenaciouslyto most surfaces, whether in a solid orfluid state.
LISTINGS/SPECIFICATIONSDow Corning 557 Silicone Dry FilmLubricant is authorized for use inofficial establishments operating underthe Federal Meat And Poultry Inspec-tion Program (formerly USDA H2ratings) where there is no possibilityof food contact.
HOW TO USEApplicationDow Corning 557 Silicone Dry FilmLubricant may be sprayed from anaerosol can or an automatic lubricator,applied by brushing or dipping. Only avery thin film is needed for maximumresults. The film is useful immediatelyafter the solvent evaporates.
Avoid freezing. If bulk Dow Corning557 Silicone Dry Film Lubricantseparates due to freezing, heat thesolution to 32°C (90°F) and stir theproduct until the wax dissolves backinto solution. It should remain stableuntil frozen again or until excessivesolvent evaporation occurs.
Avoid unnecessary solvent loss, wherepossible, by closing open applicationsystems. When dipping, use thesmallest dip container appropriateto the volume of parts being coated.Keep containers closed unless dippingor removing product. Do not leavedip drums or tanks open overnightor between shifts.
In most dip operations, excessivesolvent loss is unavoidable and thesolvent must be replenished. Addingnaphtha alone will not suffice. Thesolvent component consists of 94 per-cent naphtha (41°C [105°F] flashpoint) mixed with methyl amylalcohol. This premix should be addedto the depleted product that has beenheated to 32°C (90°F) and stirred untilall wax solids have gone back intosolution. Methyl amyl alcohol can beadded up to 8 percent, but not lessthan 6 percent of the solvent mixture.
The amount of premix solvent to beadded can be determined throughexperience or by conducting a percentsolids test by weighing a well-mixed3-g (0.1-oz) sample, heating to 105°C(221°F) for 20 minutes and weighingthe remaining wax at room tempera-ture. When adding solvent, strive forno more than 8 percent wax solidsunless a thicker film is desired thanprovided by the standard formulation.
This rejuvenation process should workthree to four times after which the usedmaterial should be replaced with freshproduct.
Removal of FilmDow Corning 557 Silicone Dry FilmLubricant may be removed by mostsolvents or by vapor degreasing.
HANDLING PRECAUTIONSPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED IN THIS DOCUMENT.BEFORE HANDLING, READPRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESEN-TATIVE, OR DISTRIBUTOR, ORBY CALLING YOUR GLOBALDOW CORNING CONNECTION.
USABLE LIFE ANDSTORAGEWhen stored at or below 25°C (77°F),Dow Corning 557 Silicone Dry FilmLubricant has a shelf life of 60 monthsfrom date of manufacture. Refer to
product packaging for “Use By” date.When stored at or below 4°C (40°F),solid material may precipitate. Whenthe material is warmed to room tem-perature, this material will readily re-dissolve without affecting lubricationproperties.
PACKAGINGDow Corning 557 Silicone Dry FilmLubricant is supplied in aerosol canscontaining 312 g (11 oz), in 15.1-kg(5-gal) pails and in 166.4-kg (55-gal)drums. All weights, net.
LIMITATIONSThis product is neither tested norrepresented as suitable for medical orpharmaceutical uses.
SHIPPING LIMITATIONSDow Corning 557 Silicone Dry FilmLubricant is a combustible material.
Dow Corning 557 Silicone Dry FilmLubricant Spray has the DOT Classi-fication: Compressed gas NOS –flammable gas.
WARRANTYINFORMATIONThe information contained herein isoffered in good faith and is believedto be accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, thisinformation should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fully satisfactoryfor the intended end use.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment. Your exclusive remedyfor breach of such warranty is limitedto refund of purchase price or replace-ment of any product shown to be otherthan as warranted. Dow Corning speci-fically disclaims any other express orimplied warranty of fitness for a par-ticular purpose or merchantability.Unless Dow Corning provides youwith a specific, duly signed endorse-ment of fitness for use, Dow Corningdisclaims liability for any incidental orconsequential damages. Suggestions ofuse shall not be taken as inducementsto infringe any patent.
Printed in USA Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 10-808A-01 AGP4934 ©1993, 1998, 2000 Dow Corning Corporation. All rights reserved.
MOLYKOTE® 3402 CAnti-friction Coating
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• Excellent combination of corrosion protection and lubrication.
• Used on main axle threads of drill hammers, spindles.
Color Grey
Physical propertiesViscosity at 20°C or 68°F (DIN3 cup) 47sDIN 53211/3Density at 20°C (68°F) 1.08g/mlDIN 53217/2Non-volatile content 34.5%CTM 0242 IStorage life 5years
TemperatureDrying time at 20°C (68°F) 15minutesCuring time 120/20minutes/°CCuring time 120/68minutes/°FService temperature range -200 to +310°CService temperature range -328 to +590°F
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ s=10700NASTM-D2625LFW-1, rotating¹ s=45ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutesno. of revolutions x1000 to μ=0.1LFW-1, oscillating¹ s=25ASTM-D2714F=900N, frequency=89.5osc./minutesno. of oscillations to μ=0.08
ResistanceRadiation resistance 10¶rad
1. Surface pretreatment: s = sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
FEATURES
Excellent corrosion protection•
Excellent lubricity•
Air-curing•
Strong pressure and wear resistance•
COMPOSITION
Solid lubricants•
Organic binder•
Corrosion inhibitor•
Solvent•
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE 3402 C Anti-Friction
Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm.
Curing
120 minutes at 20°C (68°F).
Solubility
Thinning can be carried out using MOLYKOTE® L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C (68°F) in the original unopened containers MOLYKOTE 3402 C Anti-friction Coating has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health,
Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
13/03/2000
DC 3634Ref. no. 71-0041D-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
��������
���*!��( @@���" *�����
���" *����� .�� !7� ��8����!��� �. 7�*7�% �!�����" !����(�������-�!7 (�!�� *����
������������� �� �� ���� �� ��� ��K���� � ���� �� � @ �������� ����� �� �� ��� ����� I �� ���� ����� ��� ������ �� �� ���� �� ��� ��K���� � ���� �� � @�������� ����� �� �� ��� ����
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,
������!���%& "����!%& '������!%
�"# $% &%& � � ��� ��� @ #�'"% --
"�) (%*+ !��,�� ������� ���%- .--�.*-
"�) (&%% �� �� � (-/ 01&/23 ���� -�6*
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23( ��(� *--
��()���!���
������� ��������� / �.- � 5%%-
/2 �.- � 5(*-
"�) (%+1 ���� ��� / %6-
/2 *+.
8��9��%.+&&- ��� ��������� ��:�� � � �*-/ 0�((/23
"���� ����,����� ��:�� #� %%(-;%-�*
���:�� ���� (- ���� ���� ��� #� ((-;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ��� ��.-/ 0�.-/23
���� *.-
���"��* ��)���!%& )��!��!��� �*����! -���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # *.--
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� -�6
8����!����� ������
)= ���� # %(---
����!����
�"# $% &-+ ��% !��� �� � ���@ ��� �������� �� %�6-
�"# $% &-& );����� �� � ���@ ��� ��� ���� %--�@66/ 0(%-/23
��� -�*
�����"��! ��.��(�!���
���������������
���$ ��
� B;������ ���� ����������� �������� E� � � � ������ ������ ��;��������� !��� ������� ��� � ����������� �� �;���� ��� ��� 0B�3�������
� B;������ ���� ��� ��� � �������������� �� ��������
� '��� ������� ���� ����� ��� ��� � ���� �� ��,��
�����������
� 9����� ���� ������ ���� ����� ������� � ���� �� �������� 8��� �� ��������� B� �������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��������� )��!��!���
�"# $% &-( �=2�B���� �����
������ �� ����� ��@ �� ���� %
%� #����� ��������� '��� � " ����(� �������� �� �� �� �� �� � ��� ��;����? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
����������� ���+�/ ��� ���� ������ � 8���� � ������� ��� � �� � ��� �@ ���� � ���� ������� ��������� � ��� ��� � �� � ������ �� ��������� � �� � �� � ��; ��� �������� � �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B ������ -- 2���� ���� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( ($�-%�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%($ �-% � (6.1 J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Product Information
Industrial Lubricants Molykote®
Gearbox and
Chain Oils
FEATURES
DESCRIPTION Molykote® gearbox and chain oils help
prevent wear and process interruptions
in power transmission systems and
components. Compared to conven-
tional oils, they also offer greater
resistance to oxidation and stable
performance at high temperatures and
under high loads. Molykote gearbox
oils maximize fill intervals and main-
tain viscosity characteristics at wide
temperature ranges.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life
span for lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Moreover, sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND
SPECIFICATIONS
Molykote lubricating fluids are kosher
approved and conform to USDA list-
ing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
Molykote gearbox and chain oils have
a shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGING Molykote gearbox and chain lubricants
are available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONS These products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS None.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION
• Hydroprocessed mineral oil (MO),
polyalphaolefin (PAO) and
polyalphaolefin/mineral oil
(PAO/MO) based lubricants.
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Gearbox and Chain Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3025A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product U
SD
A
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Fir
e P
oin
t, °
F
Po
ur
Po
int,
°C
AG
MA
2#
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
SA
E#
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Gearbox Oils1 L-0115 Gear Oil - H-23 149.4 14.8 169.3 15.2 100 500 530 -18 4 0.86 7.16 80-90 MO R&O/AW ISO 150 L-0115FG Gear Oil - H-14 150 15.4 170.1 15.9 100 500 530 -18 4 0.86 7.16 80-90 MO/PB R&O/AW ISO 150 L-0122 Gear Oil - H-2 223 20.4 265.6 21 101 510 550 -18 5 0.86 7.16 90 MO/PB R&O/AW ISO 220 L-0122FG Gear Oil - H-1 219.1 20 249.7 20.7 101 490 510 -21 5 0.86 7.16 90 MO/PB R&O/AWISO 220 L-0132 Gear Oil - H-2 312 31 349.5 31.6 134 460 515 -18 6 0.87 7.24 90-140 MO/PB R&O/AW ISO 320 L-0146 Gear Oil - H-2 456.6 32.8 507.5 33.8 107 575 620 -18 7 0.87 7.24 140 MO/PB R&O/AW ISO 460 L-0146FG Gear Oil - H-1 441.1 33.1 507.5 34.2 107 575 620 -18 7 0.88 7.32 140 MO/PB R&O/AW ISO 460 L-1115 Synthetic Blend H-2 145 15.6 162 16 100 515 530 -18 4 0.87 7.24 80-90 MO/PB R&O/AW Gear Oil - ISO 150 L-1115FG Synthetic Blend H-1 134.7 17.4 151.3 17.8 122 435 470 -39 4 0.85 7.07 80-90 PAO/MO R&O/AW Gear Oil - ISO 150 L-1122 Synthetic Blend H-2 211.6 19.5 251.8 20.2 120 500 510 -21 5 0.87 7.24 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1122FG Synthetic Blend H-1 197.8 24 220.8 24.7 142 440 490 -33 5 0.85 7.07 90 PAO/MO R&O/AW Gear Oil - ISO 220 L-1132 Synthetic Gear Oil - H-2 342.5 30.8 388.6 31.8 126 540 590 -39 6 0.85 7.07 90-140 PAO/PB R&O/AW ISO 320 L-1146 Synthetic Gear Oil - H-2 455.2 45.1 512.4 46.5 154 545 595 -36 7 0.852 7.09 140 PAO/PB R&O/AW ISO 460 L-1146FG Synthetic Gear Oil - H-1 380.2 39.2 428.3 40.4 147 545 595 -36 7 0.852 7.09 140 PAO R&O/AW ISO 460 L-01681 Gear Oil H-2 659 42 764 43 105 485 555 -21 8 0.88 7.32 140 MO/PB R&O/AWL-11681 Synthetic Gear Oil H-2 674 48 772.1 51.2 128 505 580 -27 8 0.85 7.07 140 PAO/PB R&O/AW
Chain Oils1
L-0460FG Blend Chain Oil - H-1 66 8.3 73.9 8.6 100 465 480 -12 - 0.858 7.14 30 MO R&O/AW
(ISO 68) T/PPD
L-1468FG Synthetic H-1 65.8 9.8 72.8 10 131 520 565 -54 - 0.83 6.91 30 PAO R&O/AW
Freezer Chain Oil (ISO 68) T/PPDL-1428 High Temperature H-2 285 24 327 26 110 470 572 -15 - 0.94 7.82 POE/PB R&O/AW1Typical values; not for use in preparing specifications. 2AGMA is an acronym for American Gear Manufacturers Association. 3The H-2 designation indicates the lubricated part cannot have contact with food. 4The H-1 designation indicates the lubricated part can have incidental food contact not to exceed 10 ppm.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
SpecialtyLubricants Molykote ® 55 0 Ring Grease
FEATURES Silicone based lubricant for O-rings
APPLICATIONS � Dynamic lubrication between rubber and metal parts in pneumatic systems in aircraft,
automotive and general industrial applications.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard* Parameter Unit Result Appearance off-white Base oil viscosity at 25˚C mm²/s 100 JIS K 2220 Penetration (worked 60 times) mm/10 300 to 340 NLGI class 1 Service temperature range ˚C -65 to 175 Density g/cm³ 1.0 JIS K 2220 Drop point ˚C 220 Fed Std 791 Bleed (150˚C/24 hours) % 3.0 Fed Std 791 Evaporation (150˚C/24 hours) % 1.4 JIS K 2220 Oxidation resistance (99˚C/500 hours) MPa 0.01 JIS K 2220 Water washout (38˚C/1 hour) % 4.2 DIN 51 802 Emcor corrosion test 0 *JIS: Japanese Industrial Standard. Fed Std: Federal Standard DIN: Deutsches Industrie Norm.
HOW TO USE Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
Compatibility with plastics may vary depending on the type and grade of the plastic. Performs adequate compatibility testing in advance. This grease is not compatible with silicone rubber.
HANDLING PRECAUTIONSThis product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling.
USABLE LIFE AND STORAGE When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
� High oxidation resistance
� Wide service temperature range (-65ºC to 175ºC)
� Compatable with most plastics
� Good corrosion protection
COMPOSITION� Silicone oil
� Ester
� Lithium soap
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 10/3/2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3093A-01 �2006 Dow Corning Corporation. All rights reserved.
PACKAGINGThis product is available in 5kg cans.
CAUTION
1. Data included in this document are average values, not specification values. Any applications for this product given in this document are merely examples. Perform thorough evaluations to confirm functionality, effectiveness, and safety before use. 2. No guarantees are made that the applications described in this document are free from infringements of any patent. 3. This product was developed for industrial use, and is not intended for use in medical equipment, pharmaceutical products, etc. 4. Be sure to read the material safety data sheet (MSDS) and container label for this product before use. 5. Contact Dow Corning Asia, Ltd., before reproducing any data from this document.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
MOLYKOTE® G 67Extreme pressure grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Standard* Unit Result
APPLICATION
• Spur gear systems, load chains, settling shims, springs, shaft-hub connection, encapsulated joints, gears, linear motion guides.
Color Beige
Penetration, density, viscosityNLGI consistency class 1DIN 51 818Worked penetration 310-340mm/10ISO 2137Density at 20°C 1.12g/mlISO 2811Base oil viscosity at 40°C 115mm²/sDIN 51 562
TemperatureService temperature -25 to +120°CDrop point 155°CISO 2176
Load-carrying capacity, wear protection, service lifeFour-ball tester (VKA)Weld load 4800NDIN 51 350 T.4Wear scar under 600N load 0.75mmDIN 51 350 T.5Almen-Wieland machine, OK load 20000NFretting corrosion - Deyber tester >36x10¦
ResistanceOxidation resistance, pressure drop 100h, 99°C
2.5barDIN 51 808
Corrosion protectionEmcor method 0-1DIN 51 802
Coefficient of frictionSteel ball against plastic surface (POM)Ø ball = 12.7mm, load = 6.3N, v = 10mm/s, 24h
0.08μ
Oil separation - evaporationOil separation - standard test 4.3%DIN 51 8177 days, 40°CFed-Standard
791-32-2
* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
FEATURES
Excellent protection against fretting corrosion
•
Good load carrying capacity•
High level of protection against wear
•
Particularly adhesive•
COMPOSITION
Mineral oil•
Lithium soap•
Adhesion improver•
Solid lubricants•
HOW TO USE
How to apply
Clean points of contact. Apply in same way as lubricating greases, using brush, spatula, grease-gun or automatic lubricating device. Suitable for delivery by central lubricating system. In the event of long breaks in service e.g. overnight, the pressure in the delivery equipment should be relieved. Not to be mixed with other greases.
Because of variation in quality of plastics and elastomers, compatibility tests should be carried out for swelling and shrinkage, stress-crack formation, and changes in strength and hardness.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in 1kg cans, 400g cartridges and 5kg drums.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health,
Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1998-2001 Dow Corning Corporation. All rights reserved.
30/11/1998
DC 4079Ref. no. 71-0317-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
�������� �56 ������-7��� *�����
����-7��� *����� .�� !7� ��8����!��� �. 7�*7�% �!�����" �)��*���� ��" ��"����* *���� (�"� �. (�!��& -�!7 � )���)7���� �)��"�. �) !� 36 (9�
������������� )�� ���� �� ��� ��K���� � ���� �� � �� ��� ������ ����� �� ����� ����� � �� � ��� ��� ��� �� � �� �� �� ���� �� ������� ����� �� �����@ ���,������ ��� � �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� 4���,
������!���%& "����!%& '������!%
"�) (%*+ I���,�� ������� ���%- (.-�(+-
"�) (&%% �� �� � (-/ 01&/23 ���� -�61
�"# $% $1( 4� � ��� �� �� �� � .-/ 0%-./23% ��(� *(-
��()���!���
������� ��������� ���� / �($ � 5%(-
/2 �%* � 5(.&
"�) (%+1 ���� ��� / %+$
/2 *.+
8��9�%.+&&- ��� ��������� ��:�� � � �(-/ 0�./23
4���,����� ��:�� #� &&-;%-�*
���:�� ���� (- ���� ���� ��� #� %%$;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ��� � �(-/ 0�./23 ���� %*$-
���"��* ��)���!%& )��!��!��� �*����! -���& ���'��� ��.�
2�������� � ��
�"# $% *$- ��. !��� ���� # ..--
�"# $% *$- ��$ !��� ��� ���� &--# ���� �� %�(
8����!����� ������
)= ���� # (----
2������� ����� ��� )= ���� # (6--
��������� )��!��!���
�"# $% &-( �=2�B���� �����
������ �� ����� �� -
����!����
�"# $% &-+ ��% !��� �� � ���@ ��� �������� �� (�6-
�"# $% &-& );����� �� � ���@ ��� ��� ���� %--�@66/ 0(%-/23
��� -�(
�����"��! ��.��(�!���
���������������
���$ ��
� B;������ ���� ������������ �������� !��� ������� �� ������� �� �;� ������ � ���� ��� ���, ������������@ ��� � �� ���� ������� ���������� � �� ���� �� B;���������� ��� ��� � ������� ���� ����������
� '��� ������� ���� ����� ��0����� �� ���; - ��� � �� � �� ���=2�B���� �����3
� ��� � ���� �� ��,��
�����������
� 9����� ���� ������ ���� ����� ������� � ���� �� �������� 8��� �� ��������� B� �������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��� ��)���!���
�"# $% &%+ ������ � > %�(
%� �������� �� �� �� ����� �� �� � ��� ��;����? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�% �������� ���� �� ���� ������ ������� � �� � ����� �� ��� ��
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B %1$ �� '�������� ���� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (&�-%�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%+6 �-% � (6*6 J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
MOLYKOTE® 106Anti-friction Coating
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Heat-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• For smooth coating of metal/metal combinations.
• Maintenance-free, permanent lubrication of highly stressed friction combinations with low speeds or oscillating operation.
• Used where design construction prevents the use of oil or grease or where the risk of soiling is undesirable.
• This product is used successfully for the dry lubrication of locks, hinges, joints, magnetic armatures and for the anti-seizure coating of engine and gear components.
Color Dark grey
Physical propertiesViscosity at 20°C (DIN3 cup) 42sDIN 53211/3Density at 20°C 1.16g/mlDIN 53217/2Non-volatile content 41%CTM 0242 I
TemperatureCuring time 60/150minutes/°CCuring time 30/180minutes/°CService temperature range -70 to +250°C
Load-carrying capacity, wear protection, service lifeFalex load-carrying capacity¹ p=13600*
s=11300*NASTM-D2625
LFW-1, rotating¹ p=187*ASTM-D2714F=2860N, n=72 minutesª¹, v=7.9m/minutesno. of revolutions x1000 to μ=0.1LFW-1, oscillating¹ p=409*ASTM-D2714F=900N, frequency=89.5osc./minutesno. of oscillations to μ=0.08
Corrosion protectionSalt spray test 2hISO/R 1456
1. * Surface:p = phosphatized, s = sand-blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
FEATURES
Low coefficient of friction•
High load carrying capacity•
Protection from corrosion•
Good adhesion•
Can be painted over•
COMPOSITION
Solid lubricants•
Organic binder•
Solvent•
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE 106 Anti-Friction Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm.
Curing
60 minutes at 150°C, 30 minutes at 180°C(Object temperature).
Solubility
Thinning can be carried out using MOLYKOTE® L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, MOLYKOTE 106 Anti-Friction Coating has a usable life of 36 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
19/11/1998
DC 2935Ref. no. 71-0154B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
Product Information High Performance
Lubricants Molykote® Multi-purpose Oils
FEATURES
High-performance multi-purpose industrial lubricants
DESCRIPTIONMolykote® multi-purpose oils provide
protection and lubrication for a wide
range of moving components in
industrial systems. Depending on the
application, your Dow Corning
representative can help you select the
right oil from a range of viscosities,
additive packages.
HOW TO USE Follow equipment manufacturer’s
recommendations for maintenance
procedures and oil specifications.
To ensure the longest possible life for
lubricating fluids, sample
analysis is recommended. When
utilized on a regular basis, sample
analysis can track normal aging and
depletion of antioxidants in lubricating
fluids. Sample analysis can
identify abnormal contamination that
may be limiting lubricant life. Contact
Dow Corning customer service for
additional information.
LISTINGS AND SPECIFICATIONSMolykote lubricating fluids are kosher
approved and conform to USDA
listing requirements under H-1 or H-2
designations (see Typical Properties
table). An H-1 designation indicates
the lubricated part can have incidental
food contact not to exceed 10 ppm. An
H-2 designation indicates the
lubricated part cannot have contact
with food.
HANDLING PRECAUTIONSProduct safety information required
for safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND STORAGEMolykote multi-purpose oils have a
shelf life of 60 months from date of
manufacture. Refer to product
packaging for use-by date.
PACKAGINGMolykote multi-purpose oils are
available in 18.9- and 208.2-L
(5- and 55-gal) containers.
LIMITATIONSThese products are neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONSNone.
• Lower overall maintenance costs
• Wider temperature range
• Longer oil-drain intervals
• Reduced lubricant consumption
• Extended equipment lifetime
• Reduced energy consumption
• Long life reduces lubricant usage,
maintenance cost
COMPOSITION• Hydrocracked Mineral oil (MO) -
based lubricants
TYPICAL PROPERTIES Specification Writers: Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing
specifications on this product.
Molykote® brand Product US
DA
/NS
F s
tatu
s
ISO
Gra
de
Vis
cosi
ty @
40
°C,
cSt
Vis
cosi
ty @
10
0°C
,
cSt
Vis
cosi
ty @
10
0°F
,
cSt
Vis
cosi
ty @
21
0°F
,
cSt
Vis
cosi
ty I
nd
ex
Fla
sh P
oin
t, °
F
Po
ur
Po
int,
°F
Fir
e P
oin
t, °
F
Den
sity
@ 2
0°C
,
g/m
L
Den
sity
@ 2
0°C
,
lb/g
al
Bas
e O
il
Ad
dit
ive
Pac
kag
e
Multi-Purpose Oils1
L-0532FG Multi Purpose Light Oil2 H-1 32 31.2 5.3 34.3 5.4 103 420 -18 445 0.857 7.13 MO R&O/AW
L-0568 Multi Purpose Oil 2 H-2 68 68.5 9.2 76.3 9.4 110 450 -15 480 0.868 7.22 MO RO
L-0510 Multi Purpose Oil2 H-2 100 103 11.8 104 12.1 9.5 470 -15 495 0.876 7.29 MO R&O/AW
L-0510FG Multi Purpose Oil2 H-1 100 105.1 12 118.2 12.3 103 495 -15 540 0.866 7.21 MO R&O/AW
1Typical values; not for use in preparing specifications. 2The oil date is also displayed in the Molykote® Hydraulic Oils Data Sheet.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products are
safe, effective, and fully satisfactory for
the intended end use. Suggestions of use
shall not be taken as inducements to
infringe any patent.
Dow Corning's sole warranty is that the
product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLYDISCLAIMS ANY OTHEREXPRESS OR IMPLIEDWARRANTY OF FITNESS FOR APARTICULAR PURPOSE ORMERCHANTABILITY.
DOW CORNING DISCLAIMSLIABILITY FOR ANYINCIDENTAL ORCONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
We help you invent the future is a trademark of Dow Corning Corporation.
Molykote® Multi-purpose Oils August 25, 2003 Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
Ref. No. 80-3042A-01 FPH 36757 �2003 Dow Corning Corporation. All rights reserved.
MOLYKOTE® S-1011Silicone-Free Mold Release Spray
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Non-silicone release oil for use on most types of plastic
Unit Result
APPLICATIONS
• Treatment of metal molds for excellent release of plastic parts where a silicone free release coating is desired.
Color TransparentTemperature range -55 to +220°C +14 to +482°FViscosity at 40°C (104°F) <50mm²/sDIN 51562
* DIN: Deutsche Industrie Norm
FEATURES
Allows posterior treatment of surfaces i.e. painting, etc
•
HOW TO USE
How to apply
Spray very thinly onto clean surfaces. Wipe off excess if necessary, e.g. in case of direct contact with textiles or cardboard.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C (68°F) in the original unopened containers, this product has a usable life of 60
months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning
representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©2000, 2001 Dow Corning Corporation. All rights reserved.
23/10/2000
DC 4400Ref. no. 71-0349-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
Product InformationSilicon-Based
Compounds
FEATURES• High thermal conductivity• Low bleed• Stable at high temperatures
COMPOSITION• Greaselike silicone fluid thickened
with metal oxide filler
Dow Corning® 340Heat Sink Compound
Compound provides thermal coupling of electrical/electronicdevices to heat sinks
USESDow Corning® 340 Heat Sink Compound is applied to the base and mountingstuds of transistors, diodes and silicon-controlled rectifiers. It can also serve as aneffective thermal coupler for many heat sink devices where efficient cooling isrequired. It is also suitable for aircraft engines where heat sink properties arerequired.
This product has also been used as a high-voltage corona suppressant, nonflammablecoating in connections for flyback transformers and TV sets and similar applications.
TYPICAL PROPERTIESSpecification Writers: Please contact your local Dow Corning sales office or your GlobalDow Corning Connection before writing specifications on this product.
Method Test Unit ResultColor White
ASTM D 217 Consistency, Penetrationunworked 300worked 60 strokes 275worked 100,000 strokes 245
Fed. Std. 791, Bleed after 24 hr at 392°F (200°C) percent 0.05Method 321.2Fed. Std. 791, Evaporation after 24 hr at 392°F (200°C) percent 0.5Method 321.2ASTM D 2265 Drop Point °F (°C) 570 (300)ASTM D 1475 Specific Gravity at 77°F (25°C) 2.1CTM1 0069 Thermal Conductivity, K Factor cal/sec-cm-°C 0.0014ASTM D 149 Dielectric Strength2 volts/mil 210ASTM D 495 Arc Resistance seconds 165ASTM D 150 Dielectric Constant,
at 100 Hz 5at 100 kHz 5
ASTM D 150 Dissipation Factor,at 100 Hz 0.01at 100 kHz 0.02
ASTM D 1169 Volume Resistivity ohm-cm 2 x 1015
ASTM D 4049 Water Spray Off percent 1.31CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances.2Measured using a sample thickness of 50 mils.
DESCRIPTIONDow Corning 340 Heat Sink Compoundis a grease-like silicone material, heavilyfilled with heat conductive metaloxides. This combination promoteshigh thermal conductivity, low bleedand high-temperature stability.
The compound resists changes in con-sistency at temperatures up to approxi-mately 350°F (177°C). In doing so, ithelps maintain a positive heat sink sealto improve heat transfer from theelectrical/electronic device to the heatsink or chassis, thereby increasingoverall efficiency of the device.
Printed in USA Dow Corning is a registered trademark of Dow Corning Corporation.Form No. 10-748B-01 AGP5223 ©1997, 1999, 2000 Dow Corning Corporation. All rights reserved.
HANDLING PRECAUTIONSPRODUCT SAFETY INFORMATIONREQUIRED FOR SAFE USE IS NOTINCLUDED IN THIS DOCUMENT.BEFORE HANDLING, READPRODUCT AND MATERIALSAFETY DATA SHEETS ANDCONTAINER LABELS FOR SAFEUSE, PHYSICAL AND HEALTHHAZARD INFORMATION. THEMATERIAL SAFETY DATA SHEETIS AVAILABLE FROM YOURDOW CORNING REPRESEN-TATIVE, OR DISTRIBUTOR, ORBY CALLING YOUR GLOBALDOW CORNING CONNECTION.
USABLE LIFE ANDSTORAGEDow Corning 340 Heat Sink Com-pound has a shelf life of 60 monthsfrom date of manufacture. Refer toproduct packaging for “Use By” date.
PACKAGINGDow Corning 340 Heat Sink Com-pound is available in 5-oz (142-g)tubes, 13.5-oz (383-g) weight/5.75-fl oz (170-mL) volume Semco®
cartridges, 20-lb (9-kg) pails, and275-lb (124.7-kg) drums for produc-tion lines and large scale operations.All weights, net.
LIMITATIONSThis product is neither tested norrepresented as suitable for medicalor pharmaceutical uses.
SHIPPING LIMITATIONSNone.
WARRANTY INFORMATIONThe information contained herein isoffered in good faith and is believedto be accurate. However, becauseconditions and methods of use of ourproducts are beyond our control, this
information should not be used insubstitution for customer’s tests toensure that Dow Corning’s productsare safe, effective, and fully satisfactoryfor the intended end use.
Dow Corning’s sole warranty is thatthe product will meet the Dow Corningsales specifications in effect at the timeof shipment. Your exclusive remedyfor breach of such warranty is limitedto refund of purchase price or replace-ment of any product shown to be otherthan as warranted. Dow Corning speci-fically disclaims any other express orimplied warranty of fitness for a par-ticular purpose or merchantability.Unless Dow Corning provides youwith a specific, duly signed endorse-ment of fitness for use, Dow Corningdisclaims liability for any incidental orconsequential damages. Suggestions ofuse shall not be taken as inducementsto infringe any patent.
DOW CORNING®High-Vacuum GreaseSilicone compound
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Stiff, non-melting silicone lubricating material
Standard* Unit
APPLICATIONS
• Seals and lubricates chemical processing equipment.
• Lubricating plug valves, control valves, flow meter bearings, ceramic plug cocks, fire extinguisher valves, water treating equipment, synthetic rubber gaskets and seals in high temperature applications.
• Sealing vacuum and pressure systems.
• Lubricating O-rings in binoculars and telescopes. Prevents fogging of delicate lenses.
Color White to grey, translucent
Physical nature Stiff compoundPenetration, unworked 175 to 210mm/10ISO 2137Penetration, worked 60, max. 260mm/10ISO 2137Bleed, 24 hours; 200°C <0.5%CTM 0033A AEvaporation, 24 hours; 200°C <2.0%CTM 0033A BMelting point None°C
* CTM: Corporate Test Method, copies of CTMs are available on request.
FEATURES
Good lubricating and sealing ability•
Low volatility•
Excellent resistance to water, chemicals, high and low temperatures
•
COMPOSITION
Silicone oil•
Inorganic thickener•
PERFORMANCE DATA
Solubility
DOW CORNING High-Vacuum Grease is insoluble in water, methanol, ethanol, acetone, glycol and glycerine. It can be dispersed in kerosene, stoddard solvent, benzene, toluene, ethyl ether or petroleum ether.
Chemical resistance
DOW CORNING High-Vacuum Grease is unaffected by most vegetable and minerals oils, many organic compounds, and most common gases. It is also resistant to most aqueous solutions of inorganic salts and to dilute acids and alkalies. The suitability of DOW CORNING
High-Vacuum Grease should always be tested before the material is adopted for regular use.
HANDLING PRECAUTIONS
In case of eye contact, flush eyes with water.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL
DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as
warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
23/11/1998
DC 3677Ref. no. 22-0911C-01
2 ® DOW CORNING is a registered trademark of Dow Corning Corporation.
�������� � <=6 �������������� ������
��8����!��* ��" ������* *����� .�� (�!��9(�!��& (�!��9)���!����" (�!��9����!�(�� ��(8���!���� ��'��'��* ���- (�'�(��!���" 7��'% ���"��*� �'�� '��% -�"� !�()���!��� ���*��&)��!�������% ��"�� ��.�'���8�� ��'����(��!�� ��.�������
������������� ������� ��� �� ����� ������ ���� �� ������ ������ �� ����� ����� � �� � ����� @ ��������� ��� �� ���� @ ������� ��,��K�� @������ @ � ������ ��� ��� ��� �� ������ ������ �:������
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� !���
������!���%& "����!%& '������!%
�"# $% &%& #�'" �� � ��� ��� (�*
"�) (%*+ !��,�� ������� ���%- (.-�(&-
"�) (&%% �� �� � (-/ 01&/23 ���� %�.+
4� � ��� �� �� �� � ($/ 0++/23 ��(� %----
��()���!���
������� ��������� / �*- � 5(*-
/2 �(( � 5..1
"�) (%+1 ���� ��� / 7((-
/2 7.(&
8��9��%.+&&- ��� ��������� ��:�� � � �(-/ 0�./23
"���� ����,����� ��:�� #� *6(;%-�*
���:�� ���� (- ���� ���� ��� #� 6.;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ���� �(-/ 0�./23
���� (&-
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # ..--
8����!����� ������
)= ���� # %$$--
2������� ����� ��� )= ���� # *$--
����!����
�"# $% &-+ ��% !��� �� � ���@ ��� �������� �� -�6-
�"# $% &-& );����� �� � ���@ ��� ��� ���� %--�@66/ 0(%-/23
��� -�-
�����"��! ��.��(�!���
���������������
���$ ��
� ��� ���������� C��� �;����� �� � ���� !��� ������ ��������� ����@�*-/ � 5(*-/ 0�((/2 � 5..1/23
� C��� �� � ��� � ���� �� ������ ���
� E� � � � �� ���� �� �������� � �������� ��� ��� ��� �� ����� ����
�����������
� 2����� ������ ���� ��2B ���,���
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��� ��)���!���
�"# $% &%+ )�� ������� � ����� � > (�&
? 8��9� 8������ ������ ��� �� �� �� 9������ �"�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
+�, �� $��+�- !� �))�% ��� ������ ������ � 8���� ���� �� �� ����� ��� � �� � ��� � ������ � ��� �� � ��; ��� �������� � � ��� � ������� � :����� ����� �� �� ��� ���� @ ������������ ����� �� ������� �� ��� �������� ���,���@ �� �����, �������@�� ����� � ���� �� ����� �
+��/���� � ���$�����C�� ����� �� �� ��� ������ ����@���,�� �� ��,��� 8���� ������� �� ��� �� ,�� ����� �� �;������������������������ ��� �������� � ��������� �� 7%$-/ 07*-(/23� 8��:��� ������� �� ���������� � ���� �� ���� � 8��������� ����� (6-/ 0$$./23@������� �� ������� �������� ��� �����,���
������ ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B 2� *.$( 2������������� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( -&�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%%. �-% � (6&6 J%666�(--( ��� ���� ��������� 8�� ���� �� ������
DOW CORNING® 111Silicone compound
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Parameter
Valve lubricant and sealant
Standard* Unit Value
APPLICATIONS
• Lubrication for control and pressure plug valves, water softener and faucet valves.
• Sealant for vacuum and pressure systems.
• Sealant for outdoor equipment (also shipboard) subject to washing and harsh environmental exposure: meters, electrical service entrance and underground connections.
• Damping medium for dash pots in electrical and electronic equipment.
• Chemical barrier coating.
• Used as an anti-stick and sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout.
• Rubber and plastic O-rings, gaskets and seals.
Physical nature Stiff compoundColor White to light
grey, translucentPenetration unworked 175 to 210mm/10ISO 2137Penetration, worked 60, max. 260mm/10ISO 2137Bleed 24 hours/200°C (392°F), max. 0.5%CTM 0033AEvaporation 24 hours/200°C (392°F), max.
2.0%CTM 0033A
Melting point None°C None°F
* CTM: Corporate Test Method, copies of CTMs are available on request.ISO: International Standardisation Organisation
FEATURES
Good resistance to most chemicals•
Wide service temperature range (-40°C/-40°F to 200°C/392°F)
•
Low vapor pressure•
Low volatility•
Excellent water resistance•
COMPOSITION
Silicone oil•
Inorganic thickener•
Additives•
HOW TO USE
How to apply
DOW CORNING 111 Silicone Compound can be applied by hand, specially designed automated equipment, brushing or wiping. Certain designs of grease guns may seize up; test prior to use.
A thinner consistency can be achieved
by dispersing in solvents such as xylene, mineral spirits and methyl ethyl ketone. DOW CORNING 111 Silicone Compound can then be applied by brushing, dipping or spraying.
DOW CORNING 111 Silicone Compound should not be applied to any surface which will be painted or finished. Such coatings may not
adhere to the silicone-treated surface. If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting.
Solubility
DOW CORNING 111 Silicone Compound is insoluble in water, methanol, ethanol, or mineral oil, and soluble in Chlorothene NU®*, perchloroethylene, mineral spirits and methyl ethyl ketone. The greater the consistency (lower penetration value), the lower the solubility of the specific silicone compound. The suitability of the particular solvent should be based on testing prior to regular use. Flammability and toxicological properties should be important considerations in the choice of a solvent.
Chemical resistance
DOW CORNING 111 Silicone Compound is not greatly affected by mineral oils, vegetable oils or air. It is generally resistant to dilute acids and alkalines, and to most aqueous solutions.
DOW CORNING 111 Silicone Compound is quite resistant to a wide variety of organic and inorganic chemicals. Because each application may vary in chemical composition, pressure, flow velocity, relubrication requirements and equipment design, it is recommended that the silicone compound be tested before adopting for regular use.
DOW CORNING 111 Silicone Compound is not to be used with liquid oxygen and should not be used in applications requiring LOX compatibility.
HANDLING PRECAUTIONS
DOW CORNING 111 Silicone Compound may cause temporary discomfort when in direct contact with eyes. In case of eye contact, flush eyes with water.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED.
BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C (68°F) in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
*® Chlorothene NU is a registered trademark of the Dow Chemical Company.
©1997-2001 Dow Corning Corporation. All rights reserved.
19/11/1998
DC 3666Ref. no. 22-1087C-01
2 ® DOW CORNING is a registered trademark of Dow Corning Corporation.
MOLYKOTE® PG 75High Performance Grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Lubricating grease for plastic/plastic and plastic/metal combinations with slow to medium-fast movements and light loads
Standard Unit Result
APPLICATION
• Used on vehicle track-rod joints.
Color Beige
Consistency, density, viscosityNLGI consistency class Approx. 2DIN 51 818Worked penetration 270-300mm/10ISO 2137Density at 20°C 0.86g/mlISO 2811Base oil viscosity at 40°C 32mm²/sDIN 51 562
TemperatureService temperature -40 to +130°CDrop point >190°CISO 2176Low temperature torque test at -30°CASTM-D147880Initial break-away torque 222x10ª³NmTorque after 20 minutes running time 36x10ª³NmKesternich method - flow pressure at -20°C
280mbarDIN 51 805
Load-carrying capacity, wear protection, service lifeFour-ball tester (VKA)Weld load 1300NDIN 51 350 pt.4Wear scar under 400N load 0.8mmDIN 51 350 pt.5
Coefficient of frictionSteel ball against plastic surface (POM) dia (ball) = 12.7mm; load = 5N; v = 10cm/s, 24h, μ=
0.02
Corrosion protectionSKF-Emcor methodDIN 51 802Degree of corrosion 1-2
Oil separation - evaporationStandard test 4.8%DIN 51 817Oil bleeding, 24h, 100°C 2.4%FD 791-32/2Oil evaporation, 24h, 100°C 0.2%FD 791-32/2
FEATURES
Suitable for long-term lubrication•
Good low temperature characteristics (usable down to -40°C)
•
Very low coefficient of friction•
Compatible with many plastics and elastomers
•
COMPOSITION
Mineral oil•
Polyalphaolefine•
Lithium soap•
Solid lubricants•
HOW TO USE
How to apply
Clean points of contact. Apply in same way as lubricating greases, using brush, spatula, grease-gun or automatic lubricating device. Suitable for delivery by central lubricating system. In the event of long breaks in service e.g. overnight, the pressure in the delivery equipment should be relieved. Not to be mixed with other greases.
Because of variation in quality of plastics and elastomers, compatibility tests should be carried out for swelling and shrinkage, stress-crack formation, and changes in strength and hardness.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
30/11/1998
DC 3000Ref. no. 71-0171B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® PTFE-N UVAnti-friction coating
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
• Suitable for rubber guides, sliding doors, furniture hinges, small mechanisms in office machines and sunroof seals.
• For nearly all material combinations such as metal/metal, plastic/metal, plastic/plastic combinations involving slow to medium movements and medium loads.
• The UV indicator enables the end user to readily inspect and confirm, using UV inspection lamps, that the product has been applied to the substrate.
Color Colorless
Physical propertiesViscosity at 20°C (DIN4 cup) 12sDIN 53211/4Density at 20°C 0.87g/mlDIN 53217/2Solid content¹ 23%Storage life 24months
TemperatureService temperature range -180 to +240°CDrying time at 20°C 5-10minCuring time 120/20min/°C
Load-carrying capacity, wear protection, service lifeLFW-1, rotating² b=6ASTM-D2714F=680 N, n=72 minª¹, v=7.9 m/minute² p=30no. of revolutions x1000 to μ=0.1² s=10
1. Calculated value. 2. Surface pretreatment: b = blank, p = phosphated, s = sand blasted.* ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm.
FEATURES
Very low coefficient of friction•
Colorless, therefore non-staining•
Detectable on the surface•
COMPOSITION
PTFE•
Binder•
Solvent•
Ultra-Violet indicator•
HOW TO USE
Surface preparation
First clean and degrease the surface which will be coated with MOLYKOTE PTFE-N UV Anti-Friction Coating. Phosphatization or sandblasting (180 grid) increases the adhesion and service life.
How to apply
Stir the Anti-friction Coating thoroughly before applying by spraying, dipping, centrifuging or brushing. Recommended dry film thickness: 5 to 20μm.
Curing
120 minutes at 20°C
Solubility
Thinning can be carried out using MOLYKOTE® L13 Thinner.
HANDLING PRECAUTIONS
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The material safety data sheet is available on the Dow Corning website at www.dowcorning.com. You can also obtain a copy from your local Dow Corning sales representative or Distributor or by calling your local Dow Corning Global Connection.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 24 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THE FUTURE.™
www.dowcorning.com
©1997-2001 Dow Corning Corporation. All rights reserved.
25/10/2001
DC 3730Ref. no. 71-0301C-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® MultiglissDispersion
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Dispersion with penetrating properties
Standard* Unit Result
Color Transparent
Density, viscosityDensity at 20°C 0.85g/mlISO 2811Viscosity 12.5s4 DIN 53 211
Load-carrying capacity, wear protectionFour-ball tester (VKA)Weld load 1200NDIN 51 350 pt.2Wear scar under 400N load 0.72mmDIN 51 350 pt.3
* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
FEATURES
Penetration•
Rust loosening properties•
Lubrication•
COMPOSITION
Mineral oil•
Solid lubricants•
Stabilizers•
Solvent•
Corrosion inhibitor•
HOW TO USE
How to apply
Shake before use. Can be applied with brush, oil can, spray-can, hand-held or compressed-air spraying equipment, or by dipping. On badly corroded parts, allow longer to react. Repeat if necessary.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product
safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
13/11/1998
DC 3003Ref. no. 71-0230B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
�������� �C=��)�� ��!�����E�
����" ��8�����! )��!� ���" �� !7� ����(8�% ��" .�!!��* �. � -�"����*� �. ��()����!� ���7 �� (�!�� !7���"�" ������!����
������������� ������� ��� � ���� ���� �� ��������� � �� ��������@ ������������@ ������� �������� ��� ��@ �� � ��������@ ���� �� ��� �� ����� ���
� I �� � ����� ������ @ ����� ���� ������ @ ����� ����� ����� @ ����� ��� @ ��� ��� K�� @ �;��� ��� @ ���, ���� ����� @ ����� ������� ��� @ ���� ���� @ ���,� ������ � �� ���� ���� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
�7%����� )��)��!���
���� '���� � ����,
"�) (%*+ I���,�� ������� ���%- (&-�*%-
�"# (&%% �� �� � (-/ ���� %�(%
4� � ��� �� �� �� � .-/ ��(� 1$
������� ��������� ���� / �.- � 5(-- � ��� �@ � 5%$--��� ���������
"�) (%+1 ���� ��� / #��
2��� ��� ��� � �.-/ ���� 8����;� .--
�"# $% &%+ )�� �������@ + ��� @ .-/ > (�&
��������� )��!��!���
"�)�E %.$1 ��� ���� � � $-N� ���,� � %(-
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
�"# $% *$- ��. 2�������� � ��
!��� ���� # .&--
�"# $% *$- ��$ 2�������� � ��
!��� ��� � &--# ���� �� %�%
�E< � @ ��� )����� ���������@ ���� *--#������� � @ ������ ���������
-�%-
��� ���� � @ ��;� ���� # %(--
!��� ��� �� -�+.
���..�����! �. .���!���
��� �� N -�%.
����� � � B���� �
2����� ��������� � ��� ������9�%( ����� %�++-6
N �����N ����
-�%%+-�-+&
8���� ������ � .- �������� N �����N ����
-�%*-�-6.
�����"��! ��.��(�!���
���������������
���$ ��
� 9��������� '��� ����� �� �������� C��� ������������ �������� �������� �� ������ � �� �� �������� � ��� ����� ���
� ��� ������ �� ����� ���� ������ ������� �� �� ����,�� ��������
� !��� ������ ��������� ����� !��� �������
�����������
� ����� ������� � ������ ���� ����,���� 8��� �� �������
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
+�! ����- !��!
8���� %�++-6@ 9�%( ���� . ���, � $.-/
"���� ����,����� ��:�� � ������:�� �� 1-#�
#� %%$
������ 1- �������� 9�%(@ ����, ���� ��:������ (%� � *--/
#� %(�$
����!���� �*����! -�!��
�"# $%&-+ !��� �� � ���
��� % � .-/ -
� 6-/ -�%
? "�)� "������� ������� ��� )���� �����"#� ��� ��� "�� ��� #����
�������������'����� 9��� 0)���34-.-%(1.<��, ������ $(%%(#�� 4+(%+ ������ ��� '����� B�������"� %%%+�*E" ������ ��� B�2��9I -.-*. ������ ��� ��� G !�����!8�*1(.1
+�, �� $��+�- !� �))�%"� �� ����@ ���� �� ����� �� � ����� ��� � ���� ��� �� ������ ����:��� ���� �� �� �� � � ������ ���� � ����� � ���� � ���� ���� 8 �;�� � � �������� " ������ � ���� �� �������� @ �� �� ��� � �� ��;�� ��� ���� � �� ��� �I � ���� �� � ����� � ����� �������� ���� :���,�� �� ������ ������� ���� �� ������ ���� ���� ����� � � �� ������� ��� ������F����������� � ���
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ��
�� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ � ��������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
9)�A=)�B �+. ����� 8�����F�(E��� �� +%�-*--8�-%
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B �+. ����� 8�����F�*E��� �� +%�-*--8�-%
9)�A=)�B �+. ����� 8�����F� !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
. (-�-(�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-*--8�-% � *+(1 J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
�������� �� ��������� ������
+�*7 )��.��(���� *����� .�� )���!��9)���!�� ��" )���!��9(�!����(8���!���� ��'��'��* ���- !� (�"��(�.��! (�'�(��!� ��"��*7! !� (�"��( ���"��*�
������������� ������� ��� ������ ���� ��� ��� � ������ ������ �� ���� ��������� � ����� ���������� ������ � ���� ��������� �����
� I �� � ����� ����� @ ���� ���� @ ������ �� �� @ ��������� @ ������� ������ ��� �� ��� � ���� �� �������� @ �� �� ��������� �������� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� !���
������!���%& "����!%& '������!%
�"# $% &%& #�'" �� � ��� ��� (
"�) (%*+ !��,�� ������� ���%- (1$�(6$
"�) (&%% �� �� � (-/ 01&/23 ���� -�61
�"# $% $1( 4� � ��� �� �� �� � ($/ 0++/23 ��(� (--
��()���!���
������� ��������� / �$- � 5%6-
/2 �$& � *+.
"�) (%+1 ���� ��� / ($-
/2 .&(
8��9��%.+&&- ��� ��������� ��:�� � � �(-/ 0�./23
"���� ����,����� ��:�� #� *6;%-�*
���:�� ���� (- ���� ���� ��� #� %$;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ��� � �(-/ 0�./23 ���� (%-
���"�����%��* ��)���!%& -��� )��!��!���& ���'��� ��.�
2�������� � �� 0<=83
�"# $% *$- ��. !��� ���� # %1--
����!����
�"# $% &-& );����� �� � ���@ ��� ��� ���� %--�@66/ 0(%-�(/23
��� -�%
��������� )��!��!���
�"# $% &-( �=2�B���� �����
������ �� ����� �� -
�����"��! ��.��(�!���
���$ ��
� C��� �;����� �� � ���� !��� ������ ��������� �����$-/ ��$&/2 0%6-/ �*+./23
� C��� ���� �� � ���� B;����� ����� �� �������� �������� ��� ��� ��� �� ����� ����
�����������
� ������� ���� ������ ������; ���,���
������� � ��� ���� :���!����";�!��"��"# ���! $��! ����!
��� ��)���!���
�"# $% &%+ ������ � > .�$
? 8��9� 8������ ������ ��� �� �� �� 9������ �8�� ����� ���� ��������� �� �� �����
+�- !� �))�% ��� ��� �� ����� 8���� � ������ � ��������� ���� � @ � ����� �@ �����@ ���� ���� �� ���������������� ������� ������� ����������� �� ����� ��������� � ���" �� ��� �� ��� ����, � ������@���� �������@ �� ��� ��� � ���������� �:����� ����� �� ���������#� � �� ��;�� ��� ���� ���� � �
4���� � �� ������� � :����� ����� �� �� ��� ���� @ ������������ ����� �� ������� �� ��� �������� ���,���@ �� �����, �������@�� ����� � ���� �� ����� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������� ����� ������ �F� � ������������� �F� �������� ����� �������� ���� ���� ���� ��� ���� ��� ������ ����� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ����H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B �' (% ������� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( (&�-%�(--( 9)�A=)�B � � ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%%%��-% � (66- J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
�������� �� 6=�������� ������
+�*7 )��.��(���� *����� .�� )���!��9)���!��& )���!��9(�!�� ��"��88��9(�!�� ��(8���!���� ��'��'��* ���- !� (�"��(�.��!(�'�(��!� ��" ��*7! !� (�"��( ���"��*�
������������� ������� ��� ��������� ��� ��� ��� � ������ ������ �� ���� �� I �� � ���,� ��� �� @ ���,��������� ����� ��� @ ��� ����, �� ��� @ ������� ����� �� �� @ ��������� ���,��@ ����� ����� �� � ���������� ������ �� �� ��� ������ �� �� ��� ��� �
������� � ��� ��������������� ����� � ��� � ����� ��� � ����� ��� � � � �������� ���������� ����� � ���� ���� ����� ��� ���� ��� ����� ����� ����� � ����� ���������� ��� �������
�!��"��"# ���! $��! ����!
���� !���
������!���%& /����!%& 1������!%
�"# $% &%& #�'" �� � ��� ��� (�*
"�) (%*+ !��,�� ������� ���%- (.$�(+$
"�) (&%% �� �� � (-/ 01&/23 ���� %�-(
�"# $% $1( 4� � ��� �� �� �� � ($/ 0++/23 ��(� (--
��()���!���
������� ��������� / �$- � 5%&-
/2 �$& � 5*$1
"�) (%+1 ������� ��� / 7($-
/2 7.&(
8��9 �%.+&&- ��� ��������� ��:�� � �$-/ 0�$&/23
"���� ����,����� ��:�� #� Q%(-;%-�*
���:�� ���� (- ���� ���� ��� #� Q6-;%-�*
�"# $% &-$ =� ����� ����� � ���� ��� ��� � �$-/ 0�$&/23 ���� Q&--
����!����& ���������
�"# $% &-& );����� �� � ���@ ��� ��� ���� ���� %--�@66/ 0(%-/23
��� -�%
�"# $% &-( �=2�B���� ����� �� ������� -�%
���..�����! �. .���!���
���� ���� ���� ��� �� ������ 0�)93R ���� O %(�+��@ ���� O 1�*#@ � O %-��� @���� ��� (.�@ NO
N Q-�-.
? �"#� ��� ��� "�� ��� #����"�)� "������� ������� ��� )���� ����
�����"��! ��.��(�!���
���������������
���$ ��
� C��� �;����� �� � ���� ��� ���������� !��� ������ ��������� �����$-/ � %&-/ 0�$&/2 � *$1/23
� '��� ��� ��������� ����������� ��� ��������� �� ������� <��� ���� ����� �� �������� B;����� ����������� ��� �� ��� �� �� ������
�����������
� ������� �� � ���� ������ ������; ���,���� B� ������� � ����� �������
+�, �� $�� ��� ��� �� ����� 8���� � ������ � ��������� ���� � @ � ����� �@ ����� �� ������� ���������������� � �� � �� � �������������� � �� �
+��/���� � ���$����������� ���� �������� ��:����� ��� ��� � � � � �������� 4�����������@ ���� ������ �� ���� ��� ��� �� ������ ����� ��� ��� � �@��� ���� �� ����� ��F��� ������������ ������� ���� ��� ��� � ��������� � �� ��� ���� ��� ��� ����������������� A�� �� �� ����� � ���� ���� ���� �������� ���� ��� ����� ����� ���� ������ �� �� ������ ���� �������� ���� '����� ������
$��0�� ��� ��/��� ���!�� ���� � �� ����� (-/ 01&/23 ��� ������� ������ ������ @ �� ������ �� � � ���� ���� �� 1- ��� ���� �� ��� �� ���������
������������ ������ � ��������� � ������ ������ �F� � ������� ��������� ������ �F� ����� �� ���������� ���� ���� ��� ���� ��� ������ �� ��� ���� �� �������
�������������� ������ � ����� � �� ������� ��� � ������ ��� ������� ��������������� � � �
+����+ ��/��1� ����������� �������� ����� � ���� � ���� ������ ���� ��� @ ��� ���� �� ��;� ��� ������ ������ ��������F��� �� � ��� �� ����������� �� E�������� ��������0��GE 3 ������� ��������� � ���������
2�� ������ ��������@ ���� � �� ������ ��@ ���������������� ���� �� ���� ����� ��� ��������� ������
������/ ,� ������� ������ � ������ ��/ �� �$������ �������� ������ ����� � ������� � ���� ���� �� � �������� ��� �������� C������@ ����� ������� �� ����� �� � � �� ��������� ��� ����� ��� �����@ �� �������� ����� � �� � �� � �� ���� ��� �� ���� H � �� ��� �� ��� ����H ������ ��� ���@ ��������@ �� ����� �� ��������� �� ����� �� � �� ����� �� �� � � ���� � �� �,� � ������� � ������ �� ����
��� ����H ��� ������ � �� �������� ���� ��� �� ��� ���� ��� ���������� � ����� � �� ����� ������
A��� �;��� ��� ������ ��� ������ �� ��� ������ � ������ � ����� �������� � ����� �� ��������� �� �������� ��� � �� ���� �� � ��������
/�, �� ���� �����������/�������� ��� ��+� �2� ��� � ������/,� ���� � ������ � ��� ���$�� �$ ���� � �� �+����0�����3
/�, �� ���� /�����������0����� � �������/����� � �����4$������ /������3
!B CB�� A)I "#<B#� �CB2I�IEB��
---3"�-������*3��(
9)�A=)�B �' $. ������� '��� � !B CB�� A)I "#<B#� �CB 2I�IEB� � � �������, �� ��� ���� ���������
( %&�%(�(--( ��� ���� �� 9)�A=)�B ��� ���� ���� �������, �� ��� ���� ���������
E��� �� +%�-%**B�-% � ..(( J%66+�(--( ��� ���� ��������� 8�� ���� �� ������
MOLYKOTE® S-1011Silicone-Free Mold Release Spray
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Non-silicone release oil for use on most types of plastic
Unit Result
APPLICATIONS
• Treatment of metal molds for excellent release of plastic parts where a silicone free release coating is desired.
Color TransparentTemperature range -55 to +220°C +14 to +482°FViscosity at 40°C (104°F) <50mm²/sDIN 51562
* DIN: Deutsche Industrie Norm
FEATURES
Allows posterior treatment of surfaces i.e. painting, etc
•
HOW TO USE
How to apply
Spray very thinly onto clean surfaces. Wipe off excess if necessary, e.g. in case of direct contact with textiles or cardboard.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C (68°F) in the original unopened containers, this product has a usable life of 60
months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning
representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©2000, 2001 Dow Corning Corporation. All rights reserved.
23/10/2000
DC 4400Ref. no. 71-0349-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® SuperglissCorrosion protective lubricant
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Lubricating oil with penetrating properties
Standard* Unit Result
APPLICATIONS
• Simplify dismantling of rusty components.
• Used as corrosion protection.
Color Bright, transparent
Density, viscosityDensity at 20°C 0.83g/mlISO 2811Viscosity at 40°C 3.6mm²/sDIN 51 562
Loading capacity, wear protectionFour-ball testerWeld load 1400NDIN 51 350 T.2Wear scar at 400N load 0.9mmDIN 51 350 T.3
Corrosion protectionSalt spray test 8hISO/R 1456
* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
FEATURES
Penetration•
Rust loosening properties•
Lubrication•
Corrosion protection•
COMPOSITION
Mineral oil•
Adhesion improver•
Solvent•
Corrosion inhibitors•
Propellant•
HOW TO USE
How to apply
Can be applied by means of a brush, oil-can or spray can or hand-operated spray equipment. When used as a corrosion protection, apply thinly and uniformly to the cleaned areas. Depending on the environmental conditions repeat the process from time to time.
HANDLING PRECAUTIONS
Spray can - Aerosol propellant: CO£. Pressurised container - protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Combustible.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
21/12/1998
DC 2948Ref. no. 71-0089B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
MOLYKOTE® TP 42Grease paste
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product.
Test
Light-colored adhesive grease-paste with solid lubricants for metallic friction combinations
Standard* Unit Result
APPLICATIONS
• Sliding surfaces exposed to high pressure loadings and subject to the influence of water of metal machining emulsions.
• Recommended and successfully used by leading clamping-element manufacturers, especially for chucks on metal processing machines.
Color Light beige
Penetration, density, viscosityUnworked penetration 265-300mm/10ISO 2137Density at 20°C 1.19g/mlISO 2811
TemperatureService temperature¹ -25 to +250°CDrop point 125°CISO 2176Low temperature torque test at -20°CASTM-
D-1478-80Initial break-away torque 224x10ª³NmTorque after 20 minutes running time 59x10ª³NmKesternich method - flow pressure at -20°C
740mbarDIN 51 805
Load-carrying capacity, wear protection, service lifeFour-ball tester (VKA)Weld load 3000NDIN 51 350 pt.4Wear under 800N load 0.9mmDIN 51 350 pt.5Almen-Wieland machineOK load 20000NFriction force 1710N
Coefficient of frictionPress-Fit test μ = 0.09
ResistanceWater resistance, static 2-90DIN 51 807 pt.1
Corrosion protectionSKF-Emcor methodDIN 51 802Degree of corrosion 0-1
FEATURES
High load-carrying capacity•
Particularly adhesive•
Particularly resistant to wash-out by water and metal machining emulsions
•
Prevents stick-slip•
Good corrosion protection•
Excellent protection against galling•
COMPOSITION
Mineral oil•
Synthetic oil•
Lithium soap•
Solid lubricants•
Adhesion improver•
TYPICAL PROPERTIES (continued)
TestStandard* Unit Result
Oil separation - evaporationOil separation, standard test 1.5%DIN 51 817
1. Thermal stability of solid lubricant.* ASTM: American Society for Testing and Materials.ISO: International Standardisation Organisation.DIN: Deutsche Industrie Norm.
HOW TO USE
How to apply
The sliding surfaces should be cleaned. The paste should then be applied with a suitable brush, rag or grease gun. It should not be mixed with greases or oils.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE FROM YOUR LOCAL DOW CORNING SALES REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20°C in the original unopened containers, this product has a usable life of 60 months from the date of production.
PACKAGING
This product is available in different standard container sizes. Detailed container size information should be obtained from your nearest Dow Corning sales office or Dow Corning distributor.
LIMITATIONS
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Health, Environment and Regulatory Affairs specialists available in each area.
For further information, please consult your local Dow Corning representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. Dow Corning specifically disclaims any other express or implied warranty of fitness for a particular purpose or merchantability. Unless Dow Corning provides you with a specific, duly signed endorsement of fitness for use, Dow Corning disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
©1997-2001 Dow Corning Corporation. All rights reserved.
30/11/1998
DC 3632Ref. no. 71-0160B-01
2 ® MOLYKOTE is a registered trademark of Dow Corning Corporation.
Features• Clean, white appearance• High-performance capability• Excellent lubricating properties• Good resistance to water
washout
Dow Corning®
White EPBearing Grease
The Number-OneChoice WhenClean Really
Counts in Grease.
Dow Corning ® White EP BearingGrease1 is a high-performancegrease with a mineral oil base. It isthickened with an aluminumcomplex and contains white solidlubricants. Designed as a clean,food-grade alternative to commonblack greases, Dow Corning WhiteEP Bearing Grease offers highperformance and high-loadcapability.
To Learn More ...For more information aboutDow Corning White EP BearingGrease, contact your Dow Corningrepresentative. Or call (517) 496-6000.
• High load-carrying capacity• Meets FDA Regulation 21 CFR
178.3570 and USDA H1classifications for incidentalfood contact
ApplicationsDow Corning White EP Bearing Grease can be used to lubricatebearings, gears, chains and sliding mechanisms in process machinery,in canneries, dairies, beverage plants, meat processing plants andpharmaceutical plants. It is an excellent choice for operations whereproducts must be manufactured, packaged or transported withoutblack material contamination. Dow Corning White EP Bearing Grease isappropriate for low-to-high loads, moderate-to-high temperatures andmoderate-to-high speed applications.
AV
01
26
9
1Formerly Dow Corning ® Food Grade Grease.
AV
01
72
2
Typical PropertiesThese values are not intended for use in preparing specifications.
Color ................................................................. WhiteBase Oil ..................................................... Mineral oilBase Oil Viscosity/SUS
at 100°F (38°C) ................................................ 490Solid Lubricant Content,
percent ................................................................. 5Thickener .................................. Aluminum complex
ASTM D 217 Penetration, worked 60 ...................................... 280Consistency, NLGI.................................................. #2Operating Temperature
Range1, °F (°C) ..................... 0 to 300 (-17 to 149)Fed Std 791 Bleed at 212°F (100°C), percent .......................... 1.4Fed Std 791 Evaporation at 212°F (100°C), percent ............... 1.4ASTM D 2266 4 Ball Wear Scar, 1200 rpm,
1 hour at 167°F (75°C), mm........................... 0.64ASTM D 2596 4 Ball Weld Load, N ........................................... 1300
Estimated Maximum Dn Value .................... 200,000ASTM D 2265 Dropping Point, °F (°C) ............................ 518 (270)
1Estimated service temperature range based on product formulation and laboratory testing. Actual servicetemperature range is dependent on other factors including the specific application environment.Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product anduse it as a basis for your specifications. It may be obtained from any Dow Corning Sales Office, or fromDow Corning Customer Service in Midland, MI. Call (517) 496-6000.
Dow Corning CorporationMidland, Michigan 48686-0994
Dow Corning is a registered trademark of Dow Corning Corporation.
©1994, 1998 Dow Corning Corporation. All rights reserved.
Printed in USA AGP3858 Form No. 10-811-98
LIMITED WARRANTY PLEASE READ CAREFULLYDow Corning believes that the information in this publication is an accurate description of the typicalcharacteristics and/or uses of the product or products, but it is your responsibility to thoroughly test theproduct in your specific application to determine its performance, efficacy and safety. Suggestions of usesshould not be taken as inducements to infringe any particular patent.
Unless Dow Corning provides you with a specific written warranty of fitness for a particular use,Dow Corning’s sole warranty is that the product or products will meet Dow Corning’s then current salesspecifications. DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIEDWARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR USE.Your exclusive remedy and Dow Corning’s sole liability for breach of warranty is limited to refund of thepurchase price or replacement of any product shown to be other than as warranted, and Dow Corningexpressly disclaims any liability for incidental or consequential damages.
Dow Corning White EP Bearing Grease is available from:
SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED. BEFOREHANDLING, READ PRODUCT AND MATERIAL SAFETY DATA SHEETS AND CONTAINER LABELSFOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE MATERIAL SAFETY DATASHEET IS AVAILABLE FROM YOUR DOW CORNING REPRESENTATIVE, OR DISTRIBUTOR, OR BYWRITING TO DOW CORNING CUSTOMER SERVICE, OR BY CALLING (517) 496-6000.
How To UseDow Corning White EP Bearing Greasecan be applied by hand packing, hand-operated grease guns, automaticgreasing equipment and centrallubricating systems. When lubricatingantifriction bearings, follow thebearing manufacturer’s instructions.When lubricating plain bearings, thenew grease should be pumped in untilall of the old grease has been expelled.
Use LimitationsDow Corning White EP Bearing Greasemay not be appropriate for lubricationunder exceptionally severe operatingconditions, or where chemical influ-ences or temperature extremes arelikely.This product is neither tested norrepresented as suitable for medicalor pharmaceutical uses.
Storage/Useable LifeWhen stored at or below 90°F (32°C),Dow Corning White EP Bearing Greasehas a useable life of 60 months fromdate of manufacture by Dow Corning.
Available PackagingDow Corning White EP Bearing Greaseis available in 0.525-oz (15-g) pillowpacks, 14.1-oz (400-g) cartridges, 35-lb(15.9-kg) pails, and 120- and 400-lb(54.4- and 181.4-kg) drums.
High PerformanceLubricants MOLYKOTE®YM-103
Grease
FEATURES Lubricating grease developed for plastic components
APPLICATIONS � Automobiles, electrical appliances, precision equipment, and office equipment. � Can be used with plastic-on-plastic, metal-on-metal, or plastic-on-metal friction parts.
TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Standard* Parameter Unit Result Appearance Yellow Base oil viscosity at 40ºC mm²/s 29 JIS K 2220 Penetration (worked 60 times) 300 NLGI class 1 to 2 Service temperature range ˚C -45 to 150 Density g/cm³ 0.90 JIS K 2220 Drop point ˚C 195 JIS K 2220 Bleed (100ºC 24 hours) % 3.0 JIS K 2220 Evaporation (99ºC 22 hours) % 0.2 JIS K 2220 Oxidation resistance (99ºC 100 hours) MPa 0.02 JIS K 2220 Copper corrosion (100ºC 24 hours) 1a ASTM D 2596 Four ball weld load (1500rpm/1minute) N 5200 ASTM D 2266 Four ball wear scar (1200rpm, 392N, 1 hour) mm 0.40 JIS K 2220 Low temperature torque test (-40ºC) Starting torque mN.m 93 Running torque mN.m 49 *JIS: Japanese Industrial Standard. ASTM: American Society for Testing and Materials.
HOW TO USE Clean points of application. As is usual with lubricating greases, apply or fill by means of a brush, spatula, or automatic lubrication device.
HANDLING PRECAUTIONSThis product may irritate the skin or eyes. Wear safety equipment as necessary when handling this product. In the event of contact with skin or eyes, immediately rinse thoroughly with water and seek medical care if necessary. Wash hands thoroughly after handling. At high temperatures in excess of 200ºC, the breakdown of fluorinated polymer can cause the release of a small amount of toxic gas. Ensure adequate ventilation.
� Compatible with most plastics
� Good load carrying capability and wear resistance
� Long service life
� Low seepage, so it can be used in places wherein cleanliness is required
COMPOSITION� Poly-±-olefin
� Lithium soap
� Special solid lubricants
Product Information
We help you invent the future is a trademark of Dow Corning Corporation. 10/10/2007 Dow Corning is a registered trademark of Dow Corning Corporation. Ref. No. 80-3099A-01 �2006 Dow Corning Corporation. All rights reserved.
USABLE LIFE AND STORAGE When stored, unopened in a cool, dark place this product, has a usable life of 36 months from the date of production.
PACKAGINGThis product is available in 1kg cans (10 cans/case) and 16kg pails.
LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
HEALTH AND ENVIRONMENTALINFORMATIONTo support Customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area.
For further information, please see our website, www.dowcorning.com or consult your local Dow Corning representative.
LIMITED WARRANTY INFORMATION - PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Dow Corning's products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent.
Dow Corning's sole warranty is that the product will meet the Dow Corning sales specifications in effect at the time of shipment.
Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted.
DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
We help you invent the future.™
www.dowcorning.com
Top Related