7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
1/338
PASTES
THREAD PASTES/ANTI-SEIZEMolykote 1000
Molykote HSC PlusMolykote P-37Molykote P-74ASSEMBLY PASTES
Molykote DMolykote G-n PlusMolykote G-Rapid PlusMolykote M-77
GREASE PASTES
Molykote Cu-7439 PlusMolykote DXMolykote EMolykote P-40Molykote P-1900Molykote TP-42
GREASES
MINERAL OIL GREASESMolykote 1102
Molykote 1122Molykote 165 LTMolykote BR2 PlusMolykote FB 180Molykote G-0010 Bearing GreaseMolykote G-0052FG EP White Food GradeMolykote G-67
Molykote Longterm 00Molykote Longterm 2 plusMolykote Longterm W2
SEMI-SYNTHETIC GREASESMolykote PG-75SYNTHETIC GREASES, PAO
Molykote EM-30LMolykote EM-50LMolykote EM-60LMolykote G-4500
Molykote G-4700Molykote YM-103
SYNTHETIC GREASES, POEMolykote BG-20SYNTHETIC GREASES, FLUROSILICONEMolykote FS 1292Molykote FS 3451Molykote FS 3452
SYNTHETIC GREASES, PFPEMolykote HP-300Molykote HP-870
SYNTHETIC GREASES, SILICONE
Molykote 33 LightMolykote 33 MediumMolykote 41Molykote 44 Light
Molykote 44 MediumMolykote 55MDow Corning High Vacuum Grease
Molykote PG-21Molykote PG-54COMPOUNDSMolykote 111 Compound
Dow Corning 4 CompoundDow Corning 7 CompoundDow Corning 340 Heat Sink Compound
HIGH PERFORMANCE INDUSTRIAL
LUBRICATING OIL S
MULTI-PURPOSE GEAR OILS
Molykote L-0532FGMolykote L-1122Molykote L-1132Molykote L-1122FGMolykote L-1146FG
CHAIN OILS
Molykote L-1428Molykote L-1468FG
Molykote CO 220Molykote C40 High Temp LubricantMolykote OmniglissMolykote MKL-N
COMPRESSOR OILSMolykote L-4640 ( Flush oil )Molykote L-4646 ( POE )
COATINGSANTI-FRICITON COATINGSMolykote 106
Molykote D-321RMolykote 3400A LeadfreeMolykote 3402CMolykote 7400Molykote 7405Molykote 7409Molykote D-10
Molykote PTFE-N UVOTHER COATINGS
Molykote Metal Protector PlusSOLVENTSMolykote 7414
DISPERSIONSMolykote M-55 PlusMolykote Multigliss
OTHER PRODUCTSMolykote Food Grade Spray OilMolykote Supergliss
Molykote 316 Silicone Release SprayDow Corning 557 Silicone SprayMolykote S-1011POWDERSMolykote MicrosizeMolykote Z
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
2/338
MOLYKOTE Omnigliss Spray
Quick-action penetrating agent
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications.Please contact your local Dow Corning sales representative prior to writing specificationson this product.
Test
Quick-action penetrating agent incorporating corrosion
protection, water-repellent and lubricating properties
Standard Unit Result
APPLICATIONS
Suitable for frictional contacts, running at low to medium speeds, which are
not equipped with grease nipples or oiling holes.
Used on joints, levers, chains and other components of transport and conveyor
equipment, textile machinery, automatic filling units and all types of packaging
equipment.
Color Light amber
Density
Density at 20C 0.84g/ml
Viscosity at 40C 11.8mm/s
TemperatureService temperature -30 to +80C
Load-carrying capacity, wear protection, service life
Four-ball tester (VKA)
Weld load 2900NDIN 51 350 pt.4
Weld scar under 800N load 1.1mm
FEATURES
Good penetration
Water repellent
High pressure resistance
Temporary corrosion protection
COMPOSITIONMineral oil
Solid lubricants
Corrosion inhibitors
Stabilizer
HOW TO USE
How to apply
Shake before use. Can be applied with
brush, oil can, spray-can, hand-held or
compressed-air spraying equipment,or by dipping. On badly corroded
parts, allow longer to react. Repeat if
necessary.
HANDLING PRECAUTIONS
PRODUCT SAFETY
INFORMATION REQUIRED FOR
SAFE USE IS NOT INCLUDED.
BEFORE HANDLING, READ
PRODUCT AND SAFETY DATA
SHEETS AND CONTAINER
LABELS FOR SAFE USE,
PHYSICAL AND HEALTH
HAZARD INFORMATION. THE
SAFETY DATA SHEET IS
AVAILABLE FROM YOUR LOCAL
DOW CORNING SALES
REPRESENTATIVE.
USABLE LIFE ANDSTORAGE
When stored at or below 20C in the
original unopened containers, this
product has a usable life of 60 months
from the date of production.
PACKAGING
This product is available in different
standard container sizes. Detailed
container size information should be
obtained from your nearest
Dow Corning sales office orDow Corning distributor.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
3/338
LIMITATIONS
This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATIONTo support customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Health,
Environment and Regulatory Affairs
specialists available in each area.
For further information, please
consult your local Dow Corning
representative.
WARRANTYINFORMATION - PLEASE
READ CAREFULLY
The information contained herein is
offered in good faith and is believed
to be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.Dow Corning's sole warranty is that
the product will meet the
Dow Corning sales specifications in
effect at the time of shipment. Your
exclusive remedy for breach of such
warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted. Dow Corning specifically
disclaims any other express or implied
warranty of fitness for a particular
purpose or merchantability. Unless
Dow Corning provides you with aspecific, duly signed endorsement of
fitness for use, Dow Corning
disclaims liability for any incidental
or consequential damages.
Suggestions of use shall not be taken
as inducements to infringe any patent.
1997-2001 Dow Corning Corporation. All rights reserved.
05/01/1998
DC 3630Ref. no. 71-0173A-01
2 MOLYKOTE is a registered trademark of Dow Corning Corporation.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
4/338
MOLYKOTE 106
Anti-friction Coating
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications.Please contact your local Dow Corning sales representative prior to writing specificationson this product.
Test
Heat-curing dry lubricant
Standard* Unit Result
APPLICATIONS
For smooth coating of metal/metal combinations.
Maintenance-free, permanent lubrication of highly stressed friction
combinations with low speeds or oscillating operation.
Used where design construction prevents the use of oil or grease or where therisk of soiling is undesirable.
This product is used successfully for the dry lubrication of locks, hinges, joints,
magnetic armatures and for the anti-seizure coating of engine and gear
components.
Color Dark grey
Physical propertiesViscosity at 20C (DIN3 cup) 42sDIN 53211/3
Density at 20C 1.16g/mlDIN 53217/2
Non-volatile content 41%CTM 0242 I
Temperature
Curing time 60/150minutes/C
Curing time 30/180minutes/C
Service temperature range -70 to +250C
Load-carrying capacity, wear protection, service life
Falex load-carrying capacity p=13600*
s=11300*
NASTM-D2625
LFW-1, rotating p=187*ASTM-D2714F=2860N, n=72 minutes,v=7.9m/minutes
no. of revolutions x1000 to =0.1
LFW-1, oscillating p=409*ASTM-D2714
F=900N, frequency=89.5osc./minutes
no. of oscillations to =0.08
Corrosion protection
Salt spray test 2hISO/R 1456
1. * Surface:p = phosphatized, s = sand-blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
FEATURES
Low coefficient of friction
High load carrying capacity
Protection from corrosion
Good adhesion
Can be painted over
COMPOSITION
Solid lubricants
Organic binder
Solvent
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
5/338
HOW TO USE
Surface preparation
First clean and degrease the surface
which will be coated with
MOLYKOTE 106 Anti-Friction
Coating. Phosphatization or
sandblasting (180 grid) increases theadhesion and service life.
How to apply
Stir the Anti-friction Coating
thoroughly before applying by
spraying, dipping, centrifuging or
brushing. Recommended dry film
thickness: 5 to 20m.
Curing
60 minutes at 150C,
30 minutes at 180C
(Object temperature).
Solubility
Thinning can be carried out using
MOLYKOTE L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY
INFORMATION REQUIRED FOR
SAFE USE IS NOT INCLUDED.
BEFORE HANDLING, READ
PRODUCT AND SAFETY DATA
SHEETS AND CONTAINER
LABELS FOR SAFE USE,
PHYSICAL AND HEALTH
HAZARD INFORMATION. THE
SAFETY DATA SHEET IS
AVAILABLE FROM YOUR LOCAL
DOW CORNING SALES
REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20C in theoriginal unopened containers,
MOLYKOTE 106 Anti-Friction
Coating has a usable life of 36 months
from the date of production.
PACKAGING
This product is available in different
standard container sizes. Detailed
container size information should be
obtained from your nearest
Dow Corning sales office or
Dow Corning distributor.
LIMITATIONS
This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATIONTo support customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Health,
Environment and Regulatory Affairs
specialists available in each area.
For further information, please
consult your local Dow Corning
representative.
WARRANTYINFORMATION - PLEASE
READ CAREFULLY
The information contained herein is
offered in good faith and is believed
to be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.Dow Corning's sole warranty is that
the product will meet the
Dow Corning sales specifications in
effect at the time of shipment. Your
exclusive remedy for breach of such
warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted. Dow Corning specifically
disclaims any other express or implied
warranty of fitness for a particular
purpose or merchantability. Unless
Dow Corning provides you with aspecific, duly signed endorsement of
fitness for use, Dow Corning
disclaims liability for any incidental
or consequential damages.
Suggestions of use shall not be taken
as inducements to infringe any patent.
1997-2001 Dow Corning Corporation. All rights reserved.
19/11/1998
DC 2935Ref. no. 71-0154B-01
2 MOLYKOTE is a registered trademark of Dow Corning Corporation.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
6/338
MOLYKOTE 1102
Grease
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales representative prior to writing specificationson this product.
Test
For gas taps and cocks with metal, glass and plastic
combinations
Standard* Unit Result
APPLICATIONS
Used successfully with natural gas stop-cocks of main and secondary lines in
domestic equipment, instantaneous water heaters and similar equipment.
Lubrication of smaller taps made of metal, glass or plastic.
Color Black
Consistency, density, viscosity
Consistency class, NLGI ca. 3DIN 51 818
Worked penetration 205-240mm/10ISO 2137
Density at 20C 0.96g/mlISO 2811
Base oil viscosity at 40C 900mm/sDIN 51 562
Base oil viscosity at 100C 42mm/sDIN 51 562Temperature
Service temperature range 0 to +160short term +220
C
Drop point NoneCISO 2176
Loading capacity, protection against wear
Four-ball tester
Weld load 2100NDIN 51 350 T.4
Wear scar under 800N load 0.85mmDIN 51 350 pt.5
Almen-Wieland machine
OK load 14500N
Frictional force with OK load 1300N
ResistanceWater resistance, static evaluation step 0-90DIN 51 807 T.1
Oxidation resistance, pressure drop 100h,99C
1.3barDIN 51 808
Oil separation
Standard test 0.0%DIN 51 817
1. National Lubricating Grease Institute.* ISO: International Standardisation OrganisationDIN: Deutsche Industrie Norm
FEATURES
Highly resistant to water
No drop point therefore no melting
or leakage from lubrication points
COMPOSITION
Mineral oil
Inorganic thickener
Solid lubricants
HOW TO USE
How to apply
Clean the contact areas. As is usualwith lubricating greases, apply by
means of a brush, spatula, grease-gun
or automatic lubrication device. Can
be used in central lubrication systems.If plastics or elastomers are present,
compatibility tests for swelling and
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
7/338
shrinkage, stress-crack formation,
changes in strength and hardness,
should be carried out because of the
difference in their qualities.
HANDLING PRECAUTIONS
PRODUCT SAFETY
INFORMATION REQUIRED FORSAFE USE IS NOT INCLUDED.
BEFORE HANDLING, READ
PRODUCT AND SAFETY DATA
SHEETS AND CONTAINER
LABELS FOR SAFE USE,
PHYSICAL AND HEALTH
HAZARD INFORMATION. THE
SAFETY DATA SHEET IS
AVAILABLE FROM YOUR LOCAL
DOW CORNING SALES
REPRESENTATIVE.
USABLE LIFE ANDSTORAGE
When stored at or below 20C in the
original unopened containers, this
product has a usable life of 60 months
from the date of production.
PACKAGING
This product is available in different
standard container sizes. Detailed
container size information should be
obtained from your nearest
Dow Corning sales office orDow Corning distributor.
LIMITATIONS
This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their productsafety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Health,
Environment and Regulatory Affairs
specialists available in each area.
For further information, please
consult your local Dow Corning
representative.
WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is
offered in good faith and is believed
to be accurate. However, because
conditions and methods of use of our
products are beyond our control, thisinformation should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Dow Corning's sole warranty is that
the product will meet the
Dow Corning sales specifications in
effect at the time of shipment. Your
exclusive remedy for breach of such
warranty is limited to refund of
purchase price or replacement of any
product shown to be other than aswarranted. Dow Corning specifically
disclaims any other express or implied
warranty of fitness for a particular
purpose or merchantability. Unless
Dow Corning provides you with a
specific, duly signed endorsement of
fitness for use, Dow Corning
disclaims liability for any incidental
or consequential damages.
Suggestions of use shall not be taken
as inducements to infringe any patent.
1997-2001 Dow Corning Corporation. All rights reserved.
23/11/1998
DC 2941Ref. no. 71-0146B-01
2 MOLYKOTE is a registered trademark of Dow Corning Corporation.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
8/338
MOLYKOTE FS 1292
Fluoro-Silicone Grease
APPLICATION" Lubricating grease for metal/metal combinations with slow to medium-fast
movements and medium loads over a wide temperature range.
TYPICAL PROPERTIESSpecification writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales representative prior to writing specifications on
this product.
Standard* Test Unit Result
Color Whitish
Consistency, density, viscosity
DIN 51 818 NLGI consistency class 1-2
ISO 2137 Worked penetration mm/10 280-340
ISO 2811 Density at 20C (68F) g/ml 1.28
DIN 51 562 Base oil viscosity at 25C (77F) mm2/s 1000
Temperature
Service temperature C -40 to +200 (+230
for short periods)
F -40 to +392 (+446
for short periods)
ISO 2176 Drop point C >250
F >482
ASTM-D147880 Low temperature torque test
at -30C (-22F)
Initial break-away torque Nm 118x10-3
Torque after 20 minutes running tim e Nm 41x10-3
ASTM-D147880 Low temperature torque test
at -40C (-40F)
Initial break-away torque Nm 856x10-3
Torque after 20 minutes running tim e Nm 56x10-3
Load-carrying capacity
Four-ball tester (VKA)
DIN 51 350 pt.4 Weld load N 3400
Oil separation
DIN 51 817 Standard test % 0.3
* ASTM: American Society for Testing and Materials.
ISO: International Standardisation Organisation.
DIN: Deutsche Industrie Norm.
HOW TO USE
How to applyClean bearing surfaces. Apply greasein the normal way using a brush, grease
gun or automatic lubricating system.
MOLYKOTE FS 1292 Grease can be
used in centralised lubrication systems.Do not mix with other greases.
dcProduct Information
SpecialtyLubricants
FEATURES
" Particularly suitable for long-term
lubrication by virtue of its extremely low
tendency towards oxidation
" High drop point >250C (482F);
consequently reduced risk of melting and
run-out from lubrication point
" Wide service temperature range,
-40C to +200C (-40F to +392F);
for short periods, up to 230C (446F)" High resistance to water and water
washout
" Resistant to mineral oil, fuels and many
chemicals
COMPOSITION
" Fluorosilicone oil
" Organic thickener
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
9/338
HANDLING PRECAUTIONSProduct safety information required for
safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe use,
physical and health hazard information.
The material safety data sheet is
available on the Dow Corning website
at www.dowcorning.com. You can also
obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGEWhen stored at or below 20C (68F) in
the original unopened containers, this
product has a usable life of 60 months
from the date of production.
PACKAGINGThis product is available in different
standard container sizes. Detailed
container size information should be
obtained from your nearest
Dow Corning sales office or
Dow Corning distributor.
LIMITATIONSThis product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATIONTo support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLYThe information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products are
safe, effective, and fully satisfactory
for the intended end use. Suggestions
of use shall not be taken as
inducements to infringe any patent.
Dow Corning's sole warranty is that the
product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THE
FUTURE."
www.dowcorning.com
MOLYKOTE FS 1292 Fluoro-Silicone Grease WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation.
2 08/02/2002 MOLYKOTE is a registered trademark of Dow Corning Corporation.
Ref. no. 71-0165C-01 DC 2991 0-2002 Dow Corning Corporation. All rights reserved.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
10/338
MOLYKOTE 165 LT
Gearwheel greaseGearwheel grease for the lubrication of highly stressed open
gears and reducing gears made of metal, with a peripheral speed
of up to 2.5 m/s
APPLICATIONS" Open gears that are subjected to high stresses and bad weather effects.
" Successfully used in crushing plants and in transmission gears and threaded
spindles of heavy, crank-driven presses.
TYPICAL PROPERTIESSpecification writers: These values are not intended for use in preparing specifications.Please contact your local Dow Corning sales representative prior to writing specifications on
this product.
Standard* Test Unit Result
Color Black
Consistency, density, viscosity
ISO 2137 Unworked penetration mm/10 240-270
ISO 2811 Density at 20C (68F) g/ml 0.96
DIN 51 562 Base oil viscosity at 40C (104F)1 mm2/s 320
Temperature
Service temperature range C -25 to +120
F -13 to +248
ISO 2176 Drop point C 175
F 347
ASTMD147880 Low temperature torque test at -20C (-4F)
Break-away torque Nm 880x10-3
Torque after 20 minutes running time Nm 115x10-3
DIN 51 805 Kesternich method - flow pressure at -20C (-4F) mbar 1350
Loading capacity, protection against wear, service life
Four-ball tester
DIN 51 350 T.4 Weld load N 4400
DIN 51 350 T.5 Wear scar under 800N load mm 1.2
Almen-Wieland machine
OK load N 20000
Frictional force with OK load N 2900
Corrosion protection
DIN 51 802 SKF-Emcor method
Degree of corrosion 0
Resistance
DIN 51 807 T.1 Water resistance, static evaluation step 2-90
DIN 51 808 Oxidation resistance, pressure drop 100h,
99C (210F)
bar 0.2
dcProduct Information
SpecialtyLubricants
FEATURES
" Extremely high load-carrying capacity
" Wear protection and reduction of existing
pitting in gear teeth flanks during
operation, due to the solid lubricants
incorporated in the grease. Extremely
adhesive due to build-in adhesion
improver
" Good protection against corrosion
(corrosion index 0 when tested using theSKF-Emcor method)
" Contains no lead or nickel
COMPOSITION
" Mineral oil
" Lithium soap
" Solid lubricants
" Corrosion inhibitor
" Adhesion improver
" EP additives
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
11/338
TYPICAL PROPERTIES (continued)
Standard* Test Unit Result
Oil separation
DIN 51 817 Standard test % 1.2
1. Calculated viscosity value of base oil mixture.
* ASTM: American Society for Testing and Materials.
ISO: International Standardisation Organisation.DIN: Deutsche Industrie Norm.
HOW TO USE
How to applyCarefully clean the metal surfaces and
apply using a spatula or brush.
HANDLING PRECAUTIONSProduct safety information required for
safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe use,physical and health hazard information.
The material safety data sheet is
available on the Dow Corning website
at www.dowcorning.com. You can also
obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGEWhen stored at or below 20C (68F) in
the original unopened containers, this
product has a usable life of 60 months
from the date of production.
PACKAGINGThis product is available in different
standard container sizes. Detailed
container size information should be
obtained from your nearest
Dow Corning sales office or
Dow Corning distributor.
LIMITATIONS
This product is neither tested norrepresented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATIONTo support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLYThe information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests toensure that Dow Corning's products are
safe, effective, and fully satisfactory
for the intended end use. Suggestions
of use shall not be taken as
inducements to infringe any patent.
Dow Corning's sole warranty is that the
product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMSLIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THE
FUTURE."
www.dowcorning.com
MOLYKOTE 165 LT Gearwheel grease WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation.
2 28/01/2002 MOLYKOTE is a registered trademark of Dow Corning Corporation.
Ref. no. 71-0179C-01 DC 2939 1997-2002 Dow Corning Corporation. All rights reserved.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
12/338
Product Information
High PerformanceMolykote
33 Extreme
Low Temperature Bearing Grease,Molykote
41 Extreme High
Temperature Bearing Grease,
Molykote
44 High Temperature
Bearing Grease
Lubricants
FEATURES Lubricants for antifriction bearings and plastic and rubberparts
USESAll three Molykote
Bearing Grease are used to lubricate ball bearings operating
under light to moderate loads. These can be used for:
Molykote 33 Extreme Low Temperature Bearing Grease
Freezer cart casters and cold room conveyor equipment
Utility disconnect switch contacts
Plastic electric clock motors
Maximum-demand meters, power-factor meters, watt-hour meters
Windshield wiper motor gears
Photographic, optical and surveying equipment
Oscillographs, geophysical and light, low-torque instruments
Starter clutch drives
Molykote
41 Extreme High Temperature Bearing Grease
Antifriction bearings of high-temperature equipment
Oven conveyor bearings
Wheel bearings of core oven carts
Governor linkage of steam turbines
Ball and socket connections of power insulators
Molykote
44 High Temperature Bearing Grease
Kiln preheater fans, oven fans, radiator cooling fans
Textile slashers and driers
Aircraft engine Conveyor systems
These greases do not soften or affect most plastics and are used to lubricate
plastic gears, bearings and cams, as well as metal and rubber parts. Because of
low torque requirements, Molykote
33 Extreme Low Temperature Bearing
Grease is especially effective in equipment that must start in extreme cold.
Oxidation Resistance Molykote Bearing Greases are recommended for use in
units that must remain operable when subjected not only to low and high
operating temperatures, but also to severe weathering and oxidation.
x
Resistance to oxidation, moisture andcorrosive atmospheres
x Inertness
x Good shear stability
x Wide service temperature range:
33 Extreme Low Temperature
Grease: -100 to 400F (-73 to 204C)
41 Extreme High Temperature
Grease: 0 to 550F (-18 to 288C)
44 High Temperature Grease: -40 to
400F (-40 to 204C)
x Compatible with many plastics
COMPOSITION
x Lithium soap
x Phenylmethyl silicone oil
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
13/338
We help you invent the future is a trademark of DoMolykote 33 Extreme Low Temperature Bearing Grease w Corning Corporation.Molykote 41 Extreme High Temperature Bearing Grease egistered trademark of Dow Corning Corporation.Molykote 44 High Temperature Bearing Grease ow Corningis a registered trademark of Dow Corning Corporation.
Ref. No. 10-814C-01 DIC164544 2006 Dow Corning Corporation. All rights reserved.
Molykote is a rMay 4, 2006, D
TYPI L PR PERTIESpecification Writers: These values are not intended for use in preparing specifications. Please contact your local
Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product.
Method Test Results
33 Light 33 Medium 41 Grease 44 Light 44 Medium
Color Off White Off White Black Off White Off WhiteThickner Lithium Soap Lithium Soap Carbon Black Lithium Soap Lithium Soap
Base Oil Silicone Silicone Silicone Silicone Silicone
DIN 51 562 Base Oil Viscosity @ 25C, mm2/s 100 100 316 125 125
ASTM D 217 Penetration, worked 60 strokes, mm 320 280 280 300 280
NLGI # 1 2 2 ~1 2
DIN 51 350 pt4 4 ball weld load, N (kg) 1200 (122) 1200 (122) 1500 (152) 1100 (113) 1100 (113)
Max Dn Value1 (Bore Size in mm X rpm) 250,000 200,000 75,000 350,000 300,000
Service Temperature2 Degrees C (F) -73 to 204
(-100 to 400)
-73 to 204
(-100 to 400)
-18 to 288
(0 to 550)
-40 to 204
(-40 to 400)
-40 to 204
(-40 to 400)
ASTM D 2265 Drop Point Degrees C (F) 226 (439) 226 (439) >300 (>572) 220 (432) 220 (432)
Fed Std 791 Bleed after 24 hrs @149C (300F) % 2 1 4.8 3 2.5 2
DIN 51 817 Oil Separation (Standard Test, 7 days at 40C) % 3.2 1.6 2.6 2.4 1.4
Specific Gravity @25C (77F) 0.97 0.97 1.14 1.05 1.05
ASTM D 1478-80 Low Temperature Torque @ -73C
Initial Break-away Torque, Nm 130 x 10 -3 164 x 10 -3
Torque after 20 minutes running time, Nm 13 x 10 -3 22 x 10 -3
Low Temperature Torque @ -40C
Initial Break-away Torque, Nm 225 x 10 -3 336 x 10 -3
Torque after 20 minutes running time, Nm 60 x 10 -3 124 x 10 -3
DIN 51 808 Oxidation Resistance, pressure drop 100hr,
99C (210F) bar (psi) 0.4 (5.80) 0 0.1 (1.45)
DIN 51 821-02-A FAG Rolling Element Bearing Tester, FE9,
1500/6000-150, F50, Hrs 110 110
1Maximum Dn values are approximations and will vary widely with temperature, load and bearing type.2Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including the specificapplication environment.3Values are at 392F (200C).
Specification Writers: Please obtain copies of the Dow Corning Sales Specifications for these products and use them as a basis for your specifications. They may beobtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI. Call (989) 496-6000.
Figure 1. Suggested Product Temperature Range Recommendations
Limitations of Typical Organic Greases
-100F -20F 260F 450F 550F
Molykote
44 High Temperature Grease
Molykote
41 ExtremeHigh Temperature Grease
Molykote
33 Extreme Low Temperature Grease
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
14/338
DESCRIPTIONMolykote 33 Extreme Low
Temperature Bearing Grease,
Molykote 41 Extreme High
Temperature Bearing Grease and
Molykote 44 High Temperature
Bearing Grease are silicone lubricating
oils with thickeners added.Molykote 33 Extreme Low
Temperature Bearing Grease and
Molykote
44 High Temperature
Bearing Grease are thickened with a
special lithium soap; Molykote
41
Extreme High Temperature Bearing
Grease is thickened with carbon black.
Molykote 33 Extreme Low
Temperature Bearing Grease and
Molykote 44 High Temperature
Bearing Grease are available in lightand medium consistencies NLGI #1
and #2. Molykote 41 Extreme High
Temperature Bearing Grease is
available in a medium consistency
NLGI #2.
LISTINGS/SPECIFICATIONSMolykote 33 Extreme Low
Temperature Bearing Grease is USDA
listed for use as a lubricant where there
is no possibility of food contact.
HOW TO USEConventional grease application
methods brushing, grease gun or
automatic application are suitable for
use with these Molykote Bearing
Greases. Laboratory tests and field
reports indicate that heavy duty guns
available from such manufacturers as
Lincoln-St. Louis are preferred.
Note: Extra care should be taken at alltimes to prevent dirt from
contaminating the lubricant. These
greases should be packed with a clean
metal or ebonite spatula.
LIMITATIONSThese greases should not be applied to
surfaces that are to be painted. These
greases should not be used with highly
loaded ferrous metal bearing
combinations, especially where sliding
friction is encountered.
Molykote 41 Extreme High
Temperature Bearing Grease
Bearings operating at extremely high
temperatures need to be frequently
monitored to ensure that the grease has
not dried out. If this occurs, more
grease can be added, or the existing
grease rejuvenated by adding
Dow Corning
710 Fluid.
These products are neither tested nor
represented as suitable for medical or
pharmaceutical uses.
SHIPPING LIMITATIONSNone.
USABLE LIFE AND
STORAGEWhen stored at or below 90F (32C),
Molykote 33 Extreme Low
Temperature Bearing Grease,
Molykote 41 Extreme High
Temperature Bearing Grease and
Molykote 44 High Temperature
Bearing Grease have a shelf life of
60 months from date of manufacture.
Refer to product packaging for Use
By date.
PACKAGINGNot all sizes available in allgeographies.
Molykote 33 Extreme Low
Temperature Bearing Grease is
supplied in 100-g tubes, 150-g tubes,
400-g cartridges, 1-kg cans, 3.6-kg
cans, 18-kg pails, 25-kg pails, 55-kg
drums, and 180 kg drums.
Molykote 41 Extreme High
Temperature Bearing Grease is
supplied in 100-g tubes, 150-g tubes,
400-g cartridges, 1-kg cans, 3.6-kg
cans, 5-kg pails, 18-kg pails, 25-kg
pails, and 181.4-kg drums.
Molykote 33 Extreme Low Temperature Bearing Grease We help you invent the future is a trademark of Dow Corning Corporation.Molykote 41 Extreme High Temperature Bearing Grease Molykote is a registered trademark of Dow Corning Corporation.Molykote 44 High Temperature Bearing Grease May 4, 2006, Dow Corningis a registered trademark of Dow Corning Corporation.
Ref. No. 10-814C-01 DIC164544 2006 Dow Corning Corporation. All rights reserved.
Molykote 44 High Temperature
Bearing Grease is supplied in 100-g
tubes, 150-g tubes, 400-g cartridges,
3.6-kg cans, 5-kg pails, 18-kg pails,
25-kg pails, and 180-kg drums.
HANDLING PRECAUTIONSProduct safety information required for
safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe
use, physical and health hazard
information. The material safety data
sheet is available on the Dow Corning
website at www.dowcorning.com. You
can also obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
HEALTH ANDENVIRONMENTAL
INFORMATIONTo support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
15/338
Molykote 33 Extreme Low Temperature Bearing Grease We help you invent the future is a trademark of Dow Corning Corporation.Molykote 41 Extreme High Temperature Bearing Grease Molykote is a registered trademark of Dow Corning Corporation.Molykote 44 High Temperature Bearing Grease May 4, 2006, Dow Corningis a registered trademark of Dow Corning Corporation.
Ref. No. 10-814C-01 DIC164544 2006 Dow Corning Corporation. All rights reserved.
LIMITED WARRANTYINFORMATION - PLEASEREAD CAREFULLYThe information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, thisinformation should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Suggestions of use shall not be taken
as inducements to infringe any patent.
Dow Corning's sole warranty is that
the product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE ORMERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY
INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
We help you invent the future.
www.dowcorning.com
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
16/338
Product Information
Silicon-BasedCompounds
FEATURES
High thermal conductivity
Low bleed
Stable at high temperatures
COMPOSITION
Greaselike silicone fluid thickened
with metal oxide filler
Dow Corning 340
Heat Sink Compound
Compound provides thermal coupling of electrical/electronic
devices to heat sinks
USES
Dow Corning 340 Heat Sink Compound is applied to the base and mounting
studs of transistors, diodes and silicon-controlled rectifiers. It can also serve as an
effective thermal coupler for many heat sink devices where efficient cooling is
required. It is also suitable for aircraft engines where heat sink properties arerequired.
This product has also been used as a high-voltage corona suppressant, nonflammable
coating in connections for flyback transformers and TV sets and similar applications.
TYPICAL PROPERTIESSpecification Writers: Please contact your local Dow Corning sales office or your Global
Dow Corning Connection before writing specifications on this product.
Method Test Unit Result
Color WhiteASTM D 217 Consistency, Penetration
unworked 300worked 60 strokes 275worked 100,000 strokes 245
Fed. Std. 791, Bleed after 24 hr at 392F (200C) percent 0.05
Method 321.2Fed. Std. 791, Evaporation after 24 hr at 392F (200C) percent 0.5
Method 321.2
ASTM D 2265 Drop Point F (C) 570 (300)ASTM D 1475 Specific Gravity at 77F (25C) 2.1
CTM1 0069 Thermal Conductivity, K Factor cal/ sec-cm-C 0.0014
ASTM D 149 Dielectric Strength2 volts/ mil 210ASTM D 495 Arc Resistance seconds 165
ASTM D 150 Dielectric Constant,at 100 Hz 5
at 100 kHz 5ASTM D 150 Dissipation Factor,
at 100 Hz 0.01at 100 kHz 0.02
ASTM D 1169 Volume Resistivity ohm-cm 2 x 1015
ASTM D 4049 Water Spray Off percent 1.3
1CTMs (Corporate Test Methods) correspond to standard ASTM tests in most instances.2Measured using a sample thickness of 50 mils.
DESCRIPTION
Dow Corning340 Heat Sink Compound
is a grease-like silicone material, heavily
filled with heat conductive metal
oxides. This combination promoteshigh thermal conductivity, low bleed
and high-temperature stability.
The compound resists changes in con-
sistency at temperatures up to approxi-
mately 350F (177C). In doing so, it
helps maintain a positive heat sink seal
to improve heat transfer from theelectrical/electronic device to the heat
sink or chassis, thereby increasing
overall efficiency of the device.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
17/338
Printed in USA Dow Corningis a registered trademark of Dow Corning Corporation.
Form No. 10-748B-01 AGP5223 1997, 1999, 2000 Dow Corning Corporation. All rights reserved.
HANDLING PRECAUTIONS
PRODUCT SAFETY INFORMATION
REQUIRED FOR SAFE USE IS NOT
INCLUDED IN THIS DOCUMENT.
BEFORE HANDLING, READ
PRODUCT AND MATERIAL
SAFETY DATA SHEETS AND
CONTAINER LABELS FOR SAFE
USE, PHYSICAL AND HEALTH
HAZARD INFORMATION. THE
MATERIAL SAFETY DATA SHEET
IS AVAILABLE FROM YOUR
DOW CORNING REPRESEN-
TATIVE, OR DISTRIBUTOR, OR
BY CALLING YOUR GLOBAL
DOW CORNING CONNECTION.
USABLE LIFE AND
STORAGE
Dow Corning340 Heat Sink Com-
pound has a shelf life of 60 months
from date of manufacture. Refer to
product packaging for Use By date.
PACKAGING
Dow Corning340 Heat Sink Com-
pound is available in 5-oz (142-g)
tubes, 13.5-oz (383-g) weight/
5.75-fl oz (170-mL) volume Semco
cartridges, 20-lb (9-kg) pails, and
275-lb (124.7-kg) drums for produc-
tion lines and large scale operations.
All weights, net.
LIMITATIONS
This product is neither tested nor
represented as suitable for medical
or pharmaceutical uses.
SHIPPING LIMITATIONS
None.
WARRANTY INFORMATIONThe information contained herein isoffered in good faith and is believed
to be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customers tests to
ensure that Dow Cornings products
are safe, effective, and fully satisfactory
for the intended end use.
Dow Cornings sole warranty is that
the product will meet the Dow Corningsales specifications in effect at the time
of shipment. Your exclusive remedy
for breach of such warranty is limited
to refund of purchase price or replace-
ment of any product shown to be other
than as warranted. Dow Corning speci-
fically disclaims any other express or
implied warranty of fitness for a par-
ticular purpose or merchantability.
Unless Dow Corning provides you
with a specific, duly signed endorse-
ment of fitness for use, Dow Corningdisclaims liability for any incidental or
consequential damages. Suggestions of
use shall not be taken as inducements
to infringe any patent.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
18/338
MOLYKOTE 3400 A
Thermosetting anti-friction coating
Specialty
Lubricants
Product Information
TYPICAL PROPERTIES
Specification writers: These values are not intended for use in preparing specifications.Please contact your local Dow Corning sales representative prior to writing specificationson this product.
Test
Thermosetting anti-friction coating for metal/metal
combinations involving slow to medium-fast movements
and medium to heavy loads
Standard Unit Result
APPLICATIONS
Suitable for permanent lubrication, with simultaneous corrosion protection, of
friction contacts involving high compressive stress and low speeds, and
wherever oils or greases cannot be used for technical reasons or are
undesirable because of the risk of soiling. Used successfully on hinge pins, plain bearings, cams, keyways and dentate
couplings on aircraft, on pins, springs and bearing surfaces of motor-car
brakes, moving parts of locks, switches and regulators; on special chains and
on all types of magnetic armature.
Color Grey
Density
Density at 20C 1.2g/mlISO 2811
Temperature
Service temperature -200 to +430C
Load-carrying capacity, wear protection, service life
Falex pressure resistance p=20000*NASTM-D2625
LFW-1, rotatingF=2860, N,n=72 rpm, v=7.9 min, no.ofrevolutions to =0.1
p=85000*ASTM-D2714
LFW-1, oscillating, load 900N,
frequency=89.5 os./min. no. ofoscillations to =0.08
p=42000*
1. * Surface: p = phosphatised
FEATURES
Outstanding corrosion protection
Excellent adhesion to metal
Low friction coefficient
High resistance to oil and fuels
Prevents fretting corrosion
Exceptionally wide servicetemperature range
(-198 to +430C)
High abrasion resistance,
consequently long service life
High compressive strength
COMPOSITION
Solid lubricants
Corrosion inhibitors
Organic binders
Solvents
HOW TO USE
How to apply
Carefully degrease friction surfaces
with solvent and allow solvent to
evaporate completely. Stir the
anti-friction coating thoroughly and
apply by spraying, dipping, painting
or centrifuging (dilute with
MOLYKOTE L 13 - approximately
10-20%). The friction surfaces should
be coated as evenly and thinly aspossible. Annealing: 2 hours at 150C
or 1 hour at 200C.
Diluting agent: L 13 thinners.
HANDLING PRECAUTIONS
PRODUCT SAFETY
INFORMATION REQUIRED FOR
SAFE USE IS NOT INCLUDED.
BEFORE HANDLING, READ
PRODUCT AND SAFETY DATA
SHEETS AND CONTAINERLABELS FOR SAFE USE,
PHYSICAL AND HEALTH
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
19/338
HAZARD INFORMATION. THE
SAFETY DATA SHEET IS
AVAILABLE FROM YOUR LOCAL
DOW CORNING SALES
REPRESENTATIVE.
USABLE LIFE AND
STORAGEWhen stored at or below 20C in the
original unopened containers,
MOLYKOTE 3400 A Thermosetting
Anti-Friction Coating has a usable life
of 60 months from the date of
production.
PACKAGING
This product is available in different
standard container sizes. Detailed
container size information should be
obtained from your nearestDow Corning sales office or
Dow Corning distributor.
LIMITATIONS
This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their productsafety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Health,
Environment and Regulatory Affairs
specialists available in each area.
For further information, please
consult your local Dow Corning
representative.
WARRANTY
INFORMATION - PLEASEREAD CAREFULLY
The information contained herein is
offered in good faith and is believed
to be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Dow Corning's sole warranty is that
the product will meet the
Dow Corning sales specifications in
effect at the time of shipment. Your
exclusive remedy for breach of such
warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted. Dow Corning specifically
disclaims any other express or implied
warranty of fitness for a particular
purpose or merchantability. UnlessDow Corning provides you with a
specific, duly signed endorsement of
fitness for use, Dow Corning
disclaims liability for any incidental
or consequential damages.
Suggestions of use shall not be taken
as inducements to infringe any patent.
1998-2001 Dow Corning Corporation. All rights reserved.
03/03/1998
DC 2995Ref. no. 71-0030A-01
2 MOLYKOTE is a registered trademark of Dow Corning Corporation.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
20/338
MOLYKOTE 3402 C
Anti-friction Coating
Product Information
TYPICAL PROPERTIESSpecification writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales representative prior to writing specificationson this product.
Test
Air-curing dry lubricant
Standard* Unit Result
APPLICATIONS
Excellent combination of corrosion protection and lubrication.
Used on main axle threads of drill hammers, spindles.
Color Grey
Physical properties
Viscosity at 20C or 68F (DIN3 cup) 47sDIN 53211/3
Density at 20C (68F) 1.08g/mlDIN 53217/2
Non-volatile content 34.5%CTM 0242 I
Storage life 5years
Temperature
Drying time at 20C (68F) 15minutesCuring time 120/20minutes/C
Curing time 120/68minutes/F
Service temperature range -200 to +310C
Service temperature range -328 to +590F
Load-carrying capacity, wear protection, service life
Falex load-carrying capacity s=10700NASTM-D2625
LFW-1, rotating s=45ASTM-D2714
F=2860N, n=72 minutes,v=7.9m/minutes
no. of revolutions x1000 to =0.1
LFW-1, oscillating s=25ASTM-D2714
F=900N, frequency=89.5osc./minutesno. of oscillations to =0.08
Resistance
Radiation resistance 10rad
1. Surface pretreatment: s = sand blasted.* CTM: Corporate Test Method, copies of CTMs are available on request.ASTM: American Society for Testing and Materials.DIN: Deutsche Industrie Norm
FEATURES
Excellent corrosion protection
Excellent lubricity
Air-curing
Strong pressure and wear resistance
COMPOSITIONSolid lubricants
Organic binder
Corrosion inhibitor
Solvent
HOW TO USE
Surface preparation
First clean and degrease the surface
which will be coated withMOLYKOTE 3402 C Anti-Friction
Coating. Phosphatization or
sandblasting (180 grid) increases the
adhesion and service life.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
21/338
How to apply
Stir the Anti-friction Coating
thoroughly before applying by
spraying, dipping, centrifuging or
brushing. Recommended dry film
thickness: 5 to 20m.
Curing120 minutes at 20C (68F).
Solubility
Thinning can be carried out using
MOLYKOTE L 13 Thinner.
HANDLING PRECAUTIONS
PRODUCT SAFETY
INFORMATION REQUIRED FOR
SAFE USE IS NOT INCLUDED.
BEFORE HANDLING, READ
PRODUCT AND SAFETY DATASHEETS AND CONTAINER
LABELS FOR SAFE USE,
PHYSICAL AND HEALTH
HAZARD INFORMATION. THE
SAFETY DATA SHEET IS
AVAILABLE FROM YOUR LOCAL
DOW CORNING SALES
REPRESENTATIVE.
USABLE LIFE AND
STORAGE
When stored at or below 20C (68F)in the original unopened containers
MOLYKOTE 3402 C Anti-friction
Coating has a usable life of 60 months
from the date of production.
PACKAGING
This product is available in different
standard container sizes. Detailed
container size information should be
obtained from your nearest
Dow Corning sales office or
Dow Corning distributor.
LIMITATIONS
This product is neither tested nor
represented as suitable for medical or
pharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATION
To support customers in their product
safety needs, Dow Corning has an
extensive Product Stewardshiporganization and a team of Health,
Environment and Regulatory Affairs
specialists available in each area.
For further information, please
consult your local Dow Corning
representative.
WARRANTYINFORMATION - PLEASE
READ CAREFULLY
The information contained herein is
offered in good faith and is believed
to be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products
are safe, effective, and fully
satisfactory for the intended end use.
Dow Corning's sole warranty is that
the product will meet the
Dow Corning sales specifications in
effect at the time of shipment. Your
exclusive remedy for breach of such
warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted. Dow Corning specifically
disclaims any other express or implied
warranty of fitness for a particular
purpose or merchantability. Unless
Dow Corning provides you with a
specific, duly signed endorsement of
fitness for use, Dow Corning
disclaims liability for any incidental
or consequential damages.
Suggestions of use shall not be taken
as inducements to infringe any patent.
1997-2001 Dow Corning Corporation. All rights reserved.
13/03/2000
DC 3634Ref. no. 71-0041D-01
2 MOLYKOTE is a registered trademark of Dow Corning Corporation.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
22/338
P R O D U C T I N F O R M A T I O N
Information About
MOLYKOTE
3451Chemical ResistantBearing Grease and
MOLYKOTE 3452Chemical ResistantValve Lubricant
TypeFluorosilicone greases
Special PropertiesChemical resistance; good load-
carrying ability, effective in high
temperatures
Primary UsesMOLYKOTE 3451 Chemical
Resistant Bearing Grease
NLGI #2
Exceptional antifriction
lubricant for bearings exposed to
harsh chemicals, solvents, hightemperatures, high speeds or
heavy loads
MOLYKOTE 3452 Chemical
Resistant Valve Lubricant
NLGI #3
Lubricant and sealant for valves,
shafts and packings exposed to
corrosive or aggressive chemicals
or high temperatures
DESCRIPTIONMOLYKOTE 3451 Chemical Resistant
Bearing Grease and MOLYKOTE 3452Chemical Resistant Valve Lubricant are
fluorosilicone oils thickened with
fluorinated polymers. These lubricants:
Provide superior resistance to most
chemicals
Are compatible with most gaskets,
seals and packings
Resist washout by water, fuels, oils
and solvents
These greases lubricate over a wide
temperature range.MOLYKOTE 3451Chemical Resistant Bearing Grease has
good life at temperatures from -40 to
450F (-40 to 232C);MOLYKOTE 3452
Chemical Resistant Valve Lubricant
has a serviceable temperature range
from -20 to 450F (-29 to 232C). Both
MOLYKOTE 3451 Chemical Resistant
Bearing Grease and MOLYKOTE 3452
Chemical Resistant Valve Lubricant
resist deterioration by solvents, acids,
chlorides and other severe chemicals
as well as low-pressure steam and
condensate. (See Table I .)
Bearing tests showMOLYKOTE3451
Chemical Resistant Bearing Grease has
good life at varying high loads andspeeds.
USES
MOLYKOTE3451 ChemicalResistant Bearing GreaseMOLYKOTE 3451 Chemical ResistantBearing Grease is an exceptional anti-
friction bearing lubricant especially
designed for applications that experience
a wide range of temperatures, loads
and speeds. It is particularly useful in
bearings exposed to harsh chemicals
or solvents, bearings used at highspeeds and bearings subjected to heavy
loads. MOLYKOTE3451 Bearing Grease
can be used on:
Chemical mixers
Needle bearings in circuit breakers
Pumps
Processing equipment
Fuel- and solvent-handling
equipment
Sealed-for-life bearings that must
operate at high speeds, heavy loads,
and high and low temperatures
Valves protected byMOLYKOTE3452 Chemical Resistant ValveLubricant show no evidenceofcorrosion or degradation of lubricant.
BL
17877
-1
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
23/338
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
.................................................................................................... Molykote Molykote.................................................................................................... 3451 3452
.................................................................................................... Chemical Resistant Chemical Resistant
.................................................................................................... Bearing Grease Valve Lubricant
NLGI Consistency ...................................................................... #2 #3Color ........................................................................................... White White
Thickener ................................................................................... Fluorinated polymers Fluorinated polymersASTM D 217 Penetration, worked, 60 strokes................................................ 275 270
Viscosity of fluorosilicone oil at 100F (38C), SUS ................ 2295 46,000Service Temperature Range1, F (C) ...................................... -40 to 450 (-40 to 232) -20 to 450 (-31 to 232)Max. Dn Value2 .......................................................................... 200,000 75,000Specific Gravity at 77F (25C) ................................................. 1.44 1.50
Fed Std 791 Bleed, at 400F (204C) , percent .............................................. 2.7 1.2ASTM 2265 Evaporation, at 400F (204C), percent ................................... 3.7 1.1
Dropping Point, F (C) ............................................................ >536 (>280) >570 (>300)
ASTM D 1264 Water Washout, at 175F (80C), percent................................ 0.3 0.1Fed Std 791a3 4-Ball Weld Load,Kg................................................................... 400 400ASTM D 1478 Low-Temperature Torque
starting, g-cm at -40F (-40C) ............................................... 2315running, g-cm after 1 hr at -40F (-40C) ............................. 1960
1Estimated service temperature range based on product formulation and laboratory testing. Actual service temperature range is dependent on other factors including thespecific application environment.
2Dn value =shaft size of bearing in mm x rpm; based on estimate.3Method 6503.
Specification Writers: Please obtain a copy of the Dow Corning Sales Specification for this product and use it as a basis for yourspecifications. It may be obtained from any Dow Corning Sales Office, or from Dow Corning Customer Service in Midland, MI.Call (989) 496-6000.
Table I: Chemical Resistance ofMOLYKOTE3451 Chemical Resistant Bearing Grease andMOLYKOTE3452 Chemical
Resistant Valve Lubricant
.......................................................................................................... MOLYKOTE MOLYKOTE
.......................................................................................................... 3451 3452
.......................................................................................................... Chemical Resistant Chemical Resistant HydrocarbonAfter 24 hours at 77F (25C)1 ................................................................................................ Bearing Grease Valve Lubricant Grease2
Diesel ................................................................................................ Good3 Good PoorKerosene .......................................................................................... Good Good FairSilicone Fluid ................................................................................... Fair Good PoorToluene............................................................................................ Good Good PoorHexane............................................................................................. Fair Fair PoorXylene .............................................................................................. Good Good PoorIsopropanol ...................................................................................... Good Good FairMethanol .......................................................................................... Good Good FairVM&P Naphtha............................................................................... Good Good Poor
1Test method Federal Standard 791C-6.2.2A lithium-thickened petroleum grease.3Good no observable effect on grease [grease slightly soft; poor adhesion] ; Fair grease very soft; cracked and poor adhesion; Poor grease hardened or dissolved; noadhesion.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
24/338
MOLYKOTE3452 ChemicalResistant Valve LubricantMOLYKOTE 3452 Chemical Resistant
Valve Lubricant is an exceptional valve
lubricant and sealant product particu-
larly suited for applications where cor-
rosive or aggressive chemicals are used.
MOLYKOTE 3452Valve Lubricant can
be used on:
Plug valvesMechanical seals and packings
Slow-speed roller and journal
bearings
Moderate-speed ball bearings
Instruments in high vacuum, at high
temperatures and in corrosive
atmospheres
Rotary and reciprocating shaft seals
Flexible ball joints
LIMITATIONSMOLYKOTE 3451 Chemical Resistant
Bearing Grease should not be applied
to surfaces to be painted.
MOLYKOTE3451 Chemical Resistant
Bearing Grease and MOLYKOTE 3452
Chemical Resistant Valve Lubricant are
not recommended for use with highly
oxidative chemicals (liquid Cl2or
liquid O2, for example).
These greases are soluble in ketones
such as acetone, methyl ethyl ketone
and methyl isobutyl ketone.
This product is neither tested norrepresented as suitable for medicalor pharmaceutical uses.
HOW TO USE
ApplicationMOLYKOTE3451 Chemical Resistant
Bearing Grease and MOLYKOTE 3452
Chemical Resistant Valve Lubricant
can be applied using conventional
methods of grease application
brushing, grease gun or automatic
applicators.
SHIPPING LIMITATIONSNone.
STORAGE AND SHELF LIFEWhen stored at or below 90F (32C),
MOLYKOTE 3451 Chemical Resistant
Bearing Grease and MOLYKOTE 3452
Chemical Resistant Valve Lubricant
have a shelf life of 60 months from
date of manufacture.
Note: In storage, a small amount of oil
may separate fromMOLYKOTE 3451
Chemical Resistant Bearing Grease.
This separation does not materially
affect the lubricating qualities of the
grease. Simply stir fluid back into the
grease.
PACKAGINGMOLYKOTE 3451 Chemical Resistant
Bearing Grease is available in tubes
cartridges and pails
MOLYKOTE3452 Chemical Resistant
Valve Lubricant is available in tubes,
cartridges, pails.
SAFE HANDLING INFORMATIONPRODUCT SAFETY INFORMATION
REQUIRED FOR SAFE USE IS NOT
INCLUDED. BEFORE HANDLING,
READ PRODUCT AND MATERIALSAFETY DATA SHEETS AND CON-
TAINER LABELS FOR SAFE USE,
PHYSICAL AND HEALTH HAZARD
INFORMATION. THE MATERIAL
SAFETY DATA SHEET IS AVAILABLE
FROM YOUR DOW CORNING REP-
RESENTATIVE, OR DISTRIBUTOR,
OR BY WRITING TO DOW CORNING
CUSTOMER SERVICE, OR BY
CALLING (989) 496-6000.
LIMITED WARRANTY
PLEASE READ CAREFULLYDow Corning believes that the
information in this publication is an
accurate description of the typical
characteristics and/ or uses of the
product or products, but it is your
responsibility to thoroughly test the
product in your specific application to
determine its performance, efficacy
and safety. Suggestions of uses should
not be taken as inducements to
infringe any particular patent.
Figure 1:Percent Volume Change of Various Rubbers inMOLYKOTE3452 Chemical Resistant Valve Lubricant
VolumeChange,percent
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
25/338
Dow Corning CorporationMidland, Michigan 48686-0994
Dow Corning is a registered trademark ofDow Corning Corporation.
1994, 1998 Dow Corning Corporation.All rights reserved.
Printed in USA AGP3853A Form No. 10-813-98B-01
Unless Dow Corning provides you with
a specific written warranty of fitness
for a particular use, Dow Corning s
sole warranty is that the product or
products, as supplied, will meetDow Cornings then current sales
specifications.DOW CORNING
SPECIFICALLY DISCLAIMS ANY
OTHER EXPRESS OR IMPLIED
WARRANTY, INCLUDING THE
WARRANTIES OF MERCHANT-
ABILITY AND OF FITNESS FOR
USE.Your exclusive remedy and
Dow Cornings sole liability for breach
of warranty is limited to refund of the
purchase price or replacement of any
product shown to be other than as
warranted, and Dow Corning expresslydisclaims any liability for incidental or
consequential damages.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
26/338
MOLYKOTE FS 3452
Fluoro-Silicone Grease
Lubricating and sealing grease for metal/metal, metal/plastic
and metal/elastomer combinations involving slow movements
and heavy loadings over very wide temperature ranges,
particularly under unfavorable environmental influences
APPLICATIONS" Suitable for the above friction contacts and service conditions.
" Successfully used on valves, mechanical seals and pumps, ball-and socket-joints,
bearings, on loading arms for ships and vacuum contained equipment.
TYPICAL PROPERTIESSpecification writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales representative prior to writing specifications on
this product.
Standard* Test Unit Result
Color White
Consistency, density, viscosity
DIN 51 818 NLGI consistency class 2-3
ISO 2137 Worked penetration mm/10 240-280
ISO 2811 Density at 20C (68F) g/ml 1.47Base oil viscosity at 25C (77F) mm2/s 10000
Temperature
Service temperature C -30 to +230
F -22 to +446
ISO 2176 Drop point C >220
F >428
ASTM-D147880 Low temperature torque test at -20C (-4F)
Initial break-away torque Nm 392x10-3
Torque after 20 minutes running tim e Nm 94x10-3
DIN 51 805 Kesternich method - flow pressure
at -20C (-4F)
mbar 280
Load-carrying capacity, wear protection, service life
Four-ball tester (VKA)
DIN 51 350 pt.4 Weld load N 4400
Almen-Wieland machine
OK load N 15500
Frictional force with OK load N 3500
Resistance
DIN 51 807 pt.1 Water resistance, static evaluation step 0-90
DIN 51 808 Oxidation resistance, pressure drop 100h,
99C (210F)
bar 0.0
dcProduct Information
SpecialtyLubricants
FEATURES
" Low evaporation
" High oxidation resistance
" Wide service temperature range,
-30C to +230C (-22F to +446F)
" High resistance to water and water
washout
" Resistant to most solvents and chemicals
" Compatible with many plastics and
elastomers
COMPOSITION
" Fluorosilicone oil
" PTFE thickener
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
27/338
TYPICAL PROPERTIES (continued)
Standard* Test Unit Result
Oil separation
DIN 51 817 Oil separation - standard test % 2.8
* ASTM: American Society for Testing and Materials.
ISO: International Standardisation Organisation.
DIN: Deutsche Industrie Norm.
HOW TO USE
How to applyClean bearing surfaces. Apply grease
in the normal way using a brush or
grease gun. Do not mix with other
greases. Due to variation in quality of
plastics and elastomers, compatibility
tests should be carried out for swelling
and shrinkage, stress-crack formation,
and changes in strength and hardness.
HANDLING PRECAUTIONSHands should be washed before eating,
drinking or smoking. Avoid contact
with the eyes and skin. Traces of toxic
trifluoropropionaldehyde may be
formed at temperatures of >150C
(>302F). Adequate ventilation must be
provided in enclosed spaces. At
temperatures above 290C (554F),
fluorine and hydrogen fluoride may be
evoked.
Product safety information required for
safe use is not included. Before
handling, read product and safety data
sheets and container labels for safe use,
physical and health hazard information.
The material safety data sheet is
available on the Dow Corning website
at www.dowcorning.com. You can also
obtain a copy from your local
Dow Corning sales representative or
Distributor or by calling your local
Dow Corning Global Connection.
USABLE LIFE AND
STORAGEWhen stored at or below 20C (68F) in
the original unopened containers, this
product has a usable life of 60 months
from the date of production.
PACKAGINGThis product is available in different
standard container sizes. Detailed
container size information should be
obtained from your nearest
Dow Corning sales office or
Dow Corning distributor.
LIMITATIONSThis product is neither tested nor
represented as suitable for medical orpharmaceutical uses.
HEALTH AND
ENVIRONMENTAL
INFORMATIONTo support Customers in their product
safety needs, Dow Corning has an
extensive Product Stewardship
organization and a team of Product
Safety and Regulatory Compliance
(PS&RC) specialists available in each
area.
For further information, please see our
website, www.dowcorning.com or
consult your local Dow Corning
representative.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLYThe information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customer's tests to
ensure that Dow Corning's products aresafe, effective, and fully satisfactory
for the intended end use. Suggestions
of use shall not be taken as
inducements to infringe any patent.
Dow Corning's sole warranty is that the
product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE OR
MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANYINCIDENTAL OR
CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THE
FUTURE."
www.dowcorning.com
MOLYKOTE FS 3452 Fluoro-Silicone Grease WE HELP YOU INVENT THE FUTURE. is a trademark of Dow Corning Corporation.
2 08/02/2002 MOLYKOTE is a registered trademark of Dow Corning Corporation.
Ref. no. 71-0114C-01 DC 2989 1999-2002 Dow Corning Corporation. All rights reserved.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
28/338
Product Information
High PerformanceLubricants
FEATURES
Maintain serviceable consistency
from -70 to 400F (-57 to 204C)
Practically nonvolatile
Odorless
Resistant to a wide range of
chemicals; generally resistant to
mineral oils, vegetable oils, air,dilute acids, alkalines and most
aqueous solutions;Dow Corning
111 Valve Lubricant & Sealant is
quite resistant to a variety of
organic and inorganic chemicals
Moisture resistant
Electrically insulating
Excellent rubber lubrication
Excellent release and sealing
proper ti es
Resistant to oxidation
Essentially nontoxic and non-
melting
Show little tendency to dry out in
service
COMPOSITION
Greaselike materials containing
an inert amorphous silica filler in
combination with selected
polydimethyl silicone fluids
Dow Corning 7 ReleaseCompound, Dow Corning 4 ElectricalInsulating Compound and Dow Corning
111 Valve Lubricant & Sealant
Dimethyl silicone compounds for a variety of lubrication and
protection applications
USES
Dow Corning 7 Release Compound can be used in applications including:
Mold release agent for foundry shell and core molds
Break-in treatment for bladders on tire presses
Rubber lubricant and preservative Release agent for adhesives and glues
Airframe lubricant
Cable-pulling lubricant to draw rubber-covered cable through conduit
Release agent for plastic extruders and processing equipment
Release agent for plastic film packaging machines
Uses ofDow Corning 4 Electrical Insulating Compound include:
Moisture-proof seal for aircraft, automotive and marine ignition systems
and spark plug connections
Waterproof electrical connections
Electrical assemblies and terminals
Seal and lubricant for cable connectors, battery terminals, rubber door
seals and rubber and plastic O-rings Assembly lubricant for various metal-on-plastic and metal-on-rubber
combinations
Lubrication for control and pressure plug valves
Dow Corning 111 Valve Lubricant & Sealant can be used in applications such as:
Sealant for vacuum and pressure systems
Sealant for outdoor equipment, including shipboard applications, subject
to washing and harsh environments; meters; electrical service entrance
and underground connections
Damping medium for dash pots in electrical and electronic equipment
Chemical barrier coating
Antistick and sealant for transformer gaskets and equipment enclosures,
which help prevent gaskets from sticking to metal and resist weatheringand water washout
Lubricant for rubber and plastic
O-rings (see Use Limitations)
Sealant for gaskets and seals
Lubricant for water softener and faucet valves
Valve stem lubricant for potable water
Aircraft vacuum systems
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
29/338
1Follow solvent manufacturers recommended safehandling instructions and applicable federal, stateand local regulations.
DESCRIPTION
Dimethyl silicone compounds come
in three basic consistencies:
Light Dow Corning7 Release
Compound
Medium Dow Corning4
Electrical Insulating Compound
Heavy Dow Corning111 Valve
Lubricant & Sealant
LISTINGS/
SPECIFICATIONS
These compounds are permitted
for food contact use under FDA
Regulation 21 CFR 175.300, cover-
ing polymeric coatings applied as
continuous film over a metal sub-
strate. Additionally, these compounds
are listed under NSF Standard 51
for use in food processing equip-
ment and NSF Standard 61 for use
in potable water applications.
Dow Corning4 Electrical Insulating
Compound is designed to meet the
requirements of SAE AS 8660.
HOW TO USE
For best results, clean and dry
surfaces before application.
Dow Corningsilicone compounds can
be applied by hand, by specially
designed automated equipment, or
by brushing or wiping. When using
some high pressure dispensing
equipment, separation and compac-
tion can occur. Certain designs of
grease guns may seize with silicone
compounds; test prior to using.
Where a thinner consistency is
needed, the compound can bedispersed in a solvent and applied
by brushing or spraying.1
USE LIMITATIONS
These specificDow Corning
compounds should not be applied:
To any surface that will be
painted or finished. Such
coatings may not adhere to the
silicone-treated surfaces. If
contaminated by a silicone
coating, parts can be wiped or
washed with solvent or washed
with detergent.
To O-rings or other components
made of silicone rubber because
they can deteriorate the silicone
rubber. These compounds will
also slightly swell natural butyl
rubbers. Any rubber should be
tested for excessive swell or
shrink.
Because each application may vary
in chemical composition, pressure,
flow velocity, relubrication require-
ments and equipment design, the
silicone compound should be tested
before adopting for regular use.
These compounds are not intended for
use with liquid oxygen or other strong
oxidizing chemicals and should not be
used in applications requiring LOX
compatibility.
These products are neither tested nor
represented as suitable for medical or
pharmaceutical uses.
SHIPPING LIMITATIONSNone.
STORAGE AND SHELF LIFE
When stored at 77F (25C), these
Dow Corningsilicone compounds
have a shelf life of at least 60 months
from date of manufacture. Refer to
product packaging for Use By date.
PACKAGING
TheseDow Corningsilicone com-
pounds are supplied in 5.3-oz (150-g) tubes, 8-lb (3.6-kg) cans, 40-lb
(18.1-kg) pails and 440-lb (199.6-kg)
drums.
Dow Corning111 Valve Lubricant &
Sealant is also available in 14.1-fl oz
(400-g) cartridges.
SAFE HANDLING
INFORMATION
PRODUCT SAFETY INFORMATION
REQUIRED FOR SAFE USE IS NOT
INCLUDED. BEFORE HANDLING,
READ PRODUCT AND MATERIAL
SAFETY DATA SHEETS AND
CONTAINER LABELS FOR SAFE
USE, PHYSICAL AND HEALTH
HAZARD INFORMATION. THE
MATERIAL SAFETY DATA SHEET
IS AVAILABLE FROM YOUR
DOW CORNING REPRESENTATIVE,
OR DISTRIBUTOR, OR BY WRITING
TO DOW CORNING CUSTOMER
SERVICES, OR BY CALLING
(989) 496-6000.
LIMITED WARRANTY
INFORMATION - PLEASE
READ CAREFULLY
The information contained herein is
offered in good faith and is believed to
be accurate. However, because
conditions and methods of use of our
products are beyond our control, this
information should not be used in
substitution for customers tests to
ensure that Dow Cornings products
are safe, effective, and fully
satisfactory for the intended end use.
Suggestions of use shall not be taken
as inducements to infringe any patent.
Dow Cornings sole warranty is that
the product will meet the Dow Corning
sales specifications in effect at the time
of shipment.
Your exclusive remedy for breach of
such warranty is limited to refund of
purchase price or replacement of any
product shown to be other than as
warranted.
DOW CORNING SPECIFICALLY
DISCLAIMS ANY OTHER EXPRESS
OR IMPLIED WARRANTY OF
FITNESS FOR A PARTICULAR
PURPOSE OR MERCHANTABILITY.
DOW CORNING DISCLAIMS
LIABILITY FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES.
WE HELP YOU INVENT THEFUTURE.
www.dowcorning.com
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
30/338
TYPICAL PROPERTIESThese values are not intended for use in preparing specifications.
Method Test Unit Result
Dow Corning Dow Corning
Dow Corning 4 Electrical 111 Valve
7 Relase Insulating Lubricant &
Physical Compound Compound Sealant
CTM1 0176 Color White, White, White,
translucent translucent translucent
CTM 0191 NLGI #1 #2 #3
Penetration, worked 60 270 240 205
worked 100,000 322 279 217
CTM 0033A Bleed, 24 hr/392F (200C) percent 6.5 4.5 0.05
CTM 0033A Evaporation, 24 hr/392F (200C) percent 0.8 1.4 1.1
Service Temperature Range F (C) -40 to 400 -70 to 400 -40 to 400
(-40 to 204) (-57 to 204) (-40 to 204)
Melting Point None None None
CTM 0022 Specific Gravity at 77F (25C) 1.0 1.0 1.0
FDA Recognition, 21 CFR 175.300 Yes Yes Yes
ElectricalCTM 0112 Dielectric Constant,
at 100 Hz 2.85 2.98 2.88
at 100 kHz 2.83 3.01 2.95
CTM 0112 Dissipation Factor,
at 100 Hz
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
31/338
Dow Corning is a registered trademark of Dow Corning Corporation.
Form No. 71-448k-01 FPH 29249 1996, 1999, 2002 Dow Corning Corporation. All rights reserved.
7/28/2019 Molykote (R) in India from Project Sales Corp SMS +91-98851-49412
32/338
MOLYKOTE 41
GreaseThis is a silicone grease that can be used at temperatures higher
than those of normal silicone greases
APPLICATIONS" Ideal for use in oven conveyers, kiln dollies, molten salt evacuation pumps,
steam turbine regulator links, knife-edge power breakers, etc.
TYPICAL PROPERTIESSpecification writers: These values are not intended for use in preparing specifications.
Please contact your local Dow Corning sales representative prior to writing specifications on
this product.
Standard* Parameter Unit Value
Appearance Black
Base oil viscosity at 25C mm2/s 316
JIS K 2220 Penetration (worked 60 times) mm/10 260 to 300
NLGI class 2
Service temperature range C -20 to 290
Density g/cm3 1.1
JIS K 2220 Drop point C None
MIL S 8660 Bleed (150C/24 hours) % 4.0
MIL S 8660 Evaporation (150C/24 hours) % 1.0
JIS K 2220 Water washout (38C/1 hour) % 0.5
ASTM D 2596 Four ball weld load (1500rpm/1m inute) N 1500
Maximum Dn value mm/
minute
75,000
*JIS: Japanese Industrial Standard.
ASTM: American Society for Testing and Materials.
MIL: Military Specification and Standards.
HOW TO USEClean points of application. As is usual
with lubricating greases, apply or fillby means of a brush, spatula, or
automatic lubrication device.
Do not use on painted surfaces. Do not
use on steel bearing under high loads.
HANDLING PRECAUTIONSThis pr
Top Related