Norman F. SimmsCAD Mechanical / Electrical Designer
Mold Design in SolidWorks
2
Inserting Mounting BossesNorman F. Simms Mechanical / Electrical Designer 215-269-
0390
3Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Creating a Reference Plane to Mirror Boss Features About
4Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Completing the Draft Check
5Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Adding Draft – Adding Draft to Yellow Area
6Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Applying Scaling – Due to Plastics Shrinkage when Cooling
7Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Generating Parting Lines
8Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Adding Shut-off Surfaces – Closing the Open Surfaces
9Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Creating Parting Surfaces
10Norman F. Simms Mechanical / Electrical Designer 215-269-
0390
Preparing for the Tooling Split – Creating a New Reference Plane
11
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Applying the Tooling Split
12Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Displaying and Moving the Core and Cavity Entities
13Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Displaying the Core and Cavity Entities
14Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Renaming and Saving the Tooling Bodies as Individual Parts
Core
Cavity
15
Norman F. Simms Mechanical / Electrical Designer 215-269-0390
Mold Modeling is used in designing all types of complex parts, especially for plastics and is used more in our world today. As an designer, knowing how to create molds for components will always helpful to know.
If you are someone who is trying to understand CAD , I hope this was a help.
If you are someone who needs someone to help them create new designs. I hope you will use the number below and give me a call.
Thank You for Your Time.
Top Related