2009-09-01
1
Modern Organic Synthesis an Introduction
G. S. ZweifelM. H. Nantz
W.H. Freeman and Company
Chapter 1
Synthetic Design
2009-09-01
2
• What is an ideal or viable synthesis, and how does one approach a synthetic project?
• The overriding concern in a synthesis is the yield, including the inherent concepts of simplicity (fewest steps) and selectivity (chemoselectivity, regioselectivity, diastereoselectivity, and enantioselectivity).
• This chapter outlines strategies for the synthesis of target molecules based on retrosynthetic analysis.
1.1 Retrosynthetic Analysis
Basic Concept
The symbol signifies a reverse synthetic step and is called a transform.
The main transforms are disconnections, or cleavage of C-C bonds, andfunctional group interconversions (FGI)
Retrosynthetic analysis involves the disassembly of a TM into available starting materials by sequential disconnections and functional group interconversions(FGI).
Synthons are fragments resulting from disconnection of carbon-carbonbonds of the TM.
The actual substrates used for the forward synthesis are the syntheticequivalents (SE).
2009-09-01
3
Synthetic design involves two distinct steps(1) Retrosynthetic analysis(2) Subsequent translation of the analysis into a “forward direction” synthesis.
Chemical bonds can be cleaved heterolytically, homolytically, orthrough concerted transform.
Donor and Acceptor Synthons
Table 1.1 Common Acceptor Synthon
Acceptor synthon à carbocation (electrophilic)Donor synthon à carbanion (nucleophilic)
Synthetic equivalents
2009-09-01
4
Common Acceptor Synthon Synthetic equivalents
Table 1.2 Common Donor Synthons
Common Donor Synthon Synthetic equivalents
2009-09-01
5
Retrosynthetic Analysis A
Retrosynthetic Analysis B
2009-09-01
6
E-Class: Groups conferring electrophilic character to the attached carbon (+)
-NH2, -OH, -OR, =O, =NR, -X (halogens)
G-Class: Groups conferring nucleophilic character to the attached carbon (-)
-Li, -MgX, -AlR2, SiR3
A-Class: Functional Groups that exhibit ambivalent character (+ or -)
-BR2, -C=CR2, -C≡CR, -NO2, ≡N, -SR, -S(O)R, -SO2R
Alternating Polarity Disconnections
Consonant Pattern: Positive charge are placed at carbon atom bondedto the E class groups.
Dissonant Pattern: One E class is bonded to a carbon with a positivecharge, whereas the other E class group resides on a carbon with anegative charge.
Consonant
Dissonant
Simple synthesis
2009-09-01
7
One Functional Group
Analysis
2009-09-01
8
Two Functional GroupsIn a 1,3-Relationship
Analysis
Synthesis (path b)
2009-09-01
9
Two Functional Groups in 1,4-Relationship
Analysis
The a-carbon in this synthon requires an inversion of polarity(umpolung in German) from the negative (-) polarity normallyassociated with a ketone a-carbon.
a-bromoketone
Synthesis
Enolate cannot be used because of the formation of an epoxy ketone(Darzens condensation). Instead, enamine is used.
2009-09-01
10
Analysis Umpolung
Synthesis
2009-09-01
11
1.2 Reversal of the Carbonyl Group Polarity (Umpolung)The carbonyl group is electrophile at the carbon atom and hence is susceptibleto attack by nucleophile.
Reversal of polarity of a carbonyl group has been explored and systemizedby Seebach.
Umpolung in a synthesis usually requires extra steps.
Unnatural negative charge
negativelycharged ccarboxylic synthon
Since formyl and acyl anions are not accessible,one has to use synthetic equivalents of these anions.
2009-09-01
12
Formyl and Acyl anion derived from 1,3-dithianes
2-lithio-1,3dithian species; acyl anion equivalents
EtSH: pKa 11 (more acidic)EtOH: pKa 16
2009-09-01
13
With HMPA (hexamethylphosphoramide), [(Me2N)3P=O], dithiane-derivedcarbaions may serve as Michael donors. But without HMPA, 1,2-additionto the carbonyl group prevails.
2009-09-01
14
Acylanions derived from Nitroalkanes
CH3NO2, pKa 10.2; CH3CH2NO2, pKa 8.5
Nitronates of primary nitro compounds yield carboxylic acid.
2009-09-01
15
Acyl anions derived from cyanohydrins
O-protected cyanohydrins contains a masked carbonyl group with invertedpolarity.
2009-09-01
16
2009-09-01
17
Acyl anion synthon derived from cyanohydrins may be generated catalyticallyby cyanide ion via the Stetter reaction.
Acycl anions derived from Enol ethers
2009-09-01
18
Acyl anions derived from lithium acetylide
1.3 steps in planning a synthesis
• Construction of the carbon skeleton• Control of relative stereochemistry• Functional Group interconversion• Control of enantioselectivity
Construction of the carbon skeleton
2009-09-01
19
Important C-C bond forming reactions encountered in organic synthesis
• Reactions of organolithium and Grignard reagents, such as RLi, RC≡Cli, RMgX, and RC≡CMgX, with aldehyde, ketones, esters, epoxides, acid halides, and nitriles
• Reactions of 1oalkyl halides with -C≡N to extend the carbon
• Alkylations of enolate ions to introduce alkyl groups to carbons adjacent to a carbonyl group (e.g., acetoacetic ester synthesis, malonic ester synthesis)
• Condensations such as aldol (intermolecular, intramolecular), Claisen, and Dieckmann
2009-09-01
20
• Michael additions, organocuprate additions (1,4-additions)
• Friedel-Crafts alkylation and acylation reactions of aromatic substrates
• Wittig reactions, and Horner-Wadsworth-Emmons olefination
• Diels-Alder reactions giving access to cyclohexenes and 1,4-cyclohexadienes
• Ring-closing olefin metathesis
Table 1.3 Summary of Important Disconnections
2009-09-01
21
• Disconnections of bonds should be carried out only if the resultant fragments can be reconnected by known and reliable reactions.
• fewest number of disconnections (see Section 1.4, convergent vs. linear synthesis)
• It is often advantageous to disconnect at a branching point since fragments can be easily accessible, either by synthesis orfrom a commercial source.
2009-09-01
22
• A preferred disconnection of cyclic esters (lactones) or amides (lactams) produces hydroxy-carboxylic acid or amine-carboxylic acids as targets.
• Functional groups in the TM may be obtained by functional groupinterconversion.
2009-09-01
23
• Symmetry in the TM simplifies the overall synthesis by decreasing the number of steps required for obtaining the TM.
• Introduction of an activating functional group may facilitatecarbon-carbon bond formation. After accomplishing its role, theactivating group is removed.
2009-09-01
24
•The presence of a 1,6-dioxygenated compound suggests opening of a six-membered ring. A variety of cyclohexene precursors arereadily available via condensation and Diels-Alder reaction or via Birchreductions of aromatic compounds.
• Disconnection of an internal (E)- or (Z)-double bond or a side chainof an alkene suggests a Wittig-type reaction or an alkylation of avinylcuprate, respectively.
2009-09-01
25
• The presence of a six-membered ring, especially a cyclohexenederivative, suggests a Diels-Alder reaction.
• The structural feature of an a,b-unsaturated ketone or a b-hydroxy ketone in a six-membered ring suggests double disconnection coupledwith functional group interconversions. (Robinson annulation)
Functional Group Interconversion
a. Alkyl Chlorides
b. Alkyl Bromides
2009-09-01
26
c. Allylic and Propargylic Bromides
d. Alkyl Iodies
e. Nitriles
2009-09-01
27
f. 1o and 2o Alcohols
g. 1o, 2o and 3o Amines
2009-09-01
28
h. Aldehydes and Ketones
2009-09-01
29
i. Carboxylic Acids
2009-09-01
30
j. Alkenes
k. Alkynes
2009-09-01
31
Control of Relative Stereochemistry(stereoselctive and stereospecific)
• SN2 displacement reaction; E2 elimination reactions• Catalytic hydrogenation of alkyne (cis product)• Metal ammonia reduction of alkyne (trans product)• Oxidation of alkenes with osmium tetroxide
Control of enantioselectivity
• Addition of halogens, interhalogens (e.g., BrI) or halogen-like species (e.g., PhSCl, BrOH) to double bond
• Hydroboration reactions• Epoxidation of alkenes; ring-opening of epoxide• Cyclopropanation
2009-09-01
32
The choice of a method for synthesizing a compound The choice of a method for synthesizing a compound derived from a derived from a retrosyntheticretrosynthetic analysis should be analysis should be based on the following criteriabased on the following criteria
• Regiochemistry, the preferential addition of the reagent in only one of two possible regions or directions.
• Chemoselectivity, selective reaction of one functional group in the presence of other functional groups
• Stereoselectivity, the exclusive or predominant formation of one of several possible stereoisomeric products.
1.4 Choice of Synthetic Methods
• Efficiency, fewest number of steps• High yields in each step• Availability and costs of starting material• Most environmentally friendly route. Ideally the
atoms of substrate and any additional reagents used for the reaction should appear in the final product, called “atom economy”
2009-09-01
33
• Simplicity of selected procedure. • Isolation and purification of reaction products.
Ability and utility to separate and recover the reaction product from other materials
• Possibility of a convergent synthesis or a “one-pot process.
Linear and Convergent Syntheses
• In a linear synthetic scheme, the hypothetical TM is assembled in astepwise manner. If 80% yield is obtained in each step, 21% (0.87 x 100)overall yield of product can be isolated after 7 steps. If 70%, only 8% overall yield.
2009-09-01
34
• Convergent synthesis should be considered in which two or morefragments of the TM are prepared separately and then joined at thelatest-possible stage of the synthesis. Only three stages are involvedin the convergent strategy, with overall yield of 51% (0.83 x 100).
• Another important consideration in choosing a convergent protocolis that failure of a single step in a multistep synthesis does notnulify the chosen synthetic approach as whole, whereas failure of asingle step in a linear scheme may require a revision of the wholeplan.
2009-09-01
35
• Convergent syntheses involve consecutive reactions, where the reagentsor catalysts are added sequently into “one pot”.
2009-09-01
36
1.5 Domino Reactions (also called cascade or Tandem reactions)
• Domino-type reactions involve careful design of a multistep reactionin a one-pot sequence in which the first step creates the functionalityto trigger the second reaction and so on.
Robinson annulation (a Michael reaction followed by aldol condensation and dehydration)
Top Related