MJ-1.0 MJ-1.4 MJ-1.8 MJ-2.3 MJS-1.0 MJS-2.0 DT MJS-2.5 DTmm 1 000 1 400 1 800 2 300 1 000 2 000 2 500

in 39 59 71 91 39 79 98mm 1 400 1 800 2 200 2 700 1 420 2 420 2 920

in 55 71 87 106 56 95 115kg 535 590 765 870 655 - -lbs 1 180 1 300 1 686 1 918 1 444 - -kg 645 720 960 1 115 930 1 245 1 360lbs 1 422 1 588 2 117 2 459 2 050 2 745 2 999kg 150 170 190 240 160 235 280lbs 331 375 419 530 353 518 617kg 55 85 115 155 55 130 185lbs 121 187 254 342 121 287 408

Mounting category II II II + III II + III II II + III II + IIIPrimary shaft in - z 1''3/4 - 6 1''3/4 - 6 1''3/4 - 6 1''3/4 - 6 1''3/4 - 6 1''3/4 - 6 1''3/4 - 6Power range ST hp 30-100 40-100 65-100 80-100 60-100 - -Power range DT hp 30-180 40-180 65-180 80-180 60-180 110-180 120-180Number of cutters # 36 51 64 85 36 74 93

mm 360 360 360 360 460 460 460in 14 14 14 14 18 18 18

mm 200 200 200 200 250 250 250in 8 8 8 8 10 10 10

ST = Single transmission, DT = Double transmission. All models have 1000 rpm pto as standard.

Main gears are oil lubricated chain gears with heat-treated chain and sprockets.

Approximate values for all specifications.

Cutting drum

MERI CrushersTechnical specifications

Working width

Cutting depth maximum

Total width

Weight ST

Felling frame

Weight DT

Rear drum