Mechanical Power Clamping Nut I Series MCG Mechanical Power Clamping Nut I Series MDR / MDR-F

Series MDR side operation low profile with through-hole thread

MDRSize

nominalclampingforce [kN]

threadD*

max. actuationtorque [Nm]

T-NutA

max. staticload [kN]

weight approx.

[kg]Øa Ød1 Ød2 e L t

M 16 85 18 130120 120 M 20 90 22 200 2,2 90 44 86 17,5 60 30

M 24 95 28 240M 30 105 36 240

Technical data and dimensions [mm]: length dimensions according to DIN ISO 2768 mH

*property class of threaded bolt up to M24 min. Q 10.9; from M30 Q 8.8 (further thread sizes i.e. inches on request)standard thread tolerance „6G“

Series MDR - F with disk spring package higher operational safety through clamping stroke compensation

Technical data and dimensions [mm]: length dimensions according to DIN ISO 2768 mH

MDR-FSize

nominal clamping force

[kN]

technical data analogous to MDR

spring clam-ping stroke at

FN [Nm]

weight approx.

Ø b Ø d1 Ø d2 L t W

120 120 see above 1,0 3,6 92 35 88 90 61 10

Update Version

ordering example: clamping nut MDR 120 - M 30 clamping nut MDR-F 120 - M24

www.jakobantriebstechnik.de

note: Delivery with T-bolt screw possible on request

clamping elements 7