MAST CLIMBING WORK PLATFORM
KPM-8®
A heavy duty choice to lower project costs+ Reduce operating costs
by as much as 50%+ Move crew and material
safer and faster
PERFORMANCE SPECIFICATIONS:
SINGLE MAST TWIN MASTCapacity Range 11500 - 5750 lbs (5215 - 2610kg) 26000 - 8000 lbs (11795-3630kg)
Platform Length 10 - 55 ft (3 - 16.8m) 47 - 143ft (14.3 - 43.5m)
Platform Width 5 - 14 ft (1.5 - 4.5m) 5 - 14 ft (1.5 - 4.5m)
Vertical Travel Speed - Variable 0 - 30 ft (0.9 m) per minute 0 - 30 ft (0.9m) per minute
Maximum free-standing height Inside: 100 ft (30m) Outside: 72 ft (22m)
Inside: 100ft (30m) Outside: 72ft (22m)
Maximum spacing between tie anchors 50 ft (15 m) 50 ft (15m)
Maximum anchored mast height 330 ft+ (100m+) Contact Klimer for heights exceeding this.
330ft+ (100m+) Contact Klimer for heights exceeding this.
DRIVE SPECIFICATIONS
Drive System Hydraulic rack-and-pinion drive As per single-mast configuration
Power System 26kW (35hp) gasoline engine or 22kW (30hp) electric motor As per single-mast configuration
DRIVE UNIT SPECIFICATIONS
COMPONENT DIMENSIONS: L x W x H WEIGHTDrive Unit 62" x 77" x 82" (1575 x 1956 x 2083mm) 4562 lbs (2,110kg)
Mast Section 30" x 30" x 60" (762 x 762 x 1524mm) 396 lbs (180kg)
Platform Section 5 ft (1.5 m) long 60" x 60" x 29.5" (1,524 x 1524 x 8966mm) 460 lbs (209kg)
Platform Section 2.5 ft (0.76m) long 30" x 60" x 29.5" (762 x 1524 x 8966mm) 248 lbs (129kg)
Chassis (SD) Base - Outriggers not extended: 192" x 88" x 35" (5 x 2.2 x .89m)fully extended: 192" x 168" x 35" (5 x 4.3 x .89m) 6982lbs (3167kg)
Pedestal Base 76" x 70" x 32.5" (1.9 x 1.8 x 8.3m) 1234 lbs (560kg)
Nothing is out of reach.
Choosing a KPM-8 helps you:*• Work more efficiently with heavy load
capacities and fast travel speeds.
• Work at optimum height to increase production levels from 20% to 60%.
• Reduction of repetitive strain injuries
• Install and remove your platform up to 90% faster than any fixed platform.
• Keep your workers safe. Guard-rail system moves with the platform for easy installation and reduced exposue to fall hazards.
• Reduce worker fatigue and lost time climbing scaffold or stairs.
• Save time and money by using up to 80% less wall ties.
* Compared to fixed or suspended scaffold
Safety Features:• Double travel-limit switches on top and
bottom of platform structure.
• Redundant drive system includes four hydraulic motors with speed-limiting device.
• Auxiliary engine for emergency descent.
• Travel locks and limits on all platform extension beams.
• 12V control voltage.
A higher standard.Our platforms help you get the job done safer and faster while reducing your operating costs. When you choose a Klimer, you are not just choosing a platform; you are choosing a higher standard.
“What’s possible?” is a question we ask ourselves every day. We’re engineers, designers and
problem solvers partnering with clients to find the most efficient ways to take workers and
materials to hard-to-get-to places. Safer. Faster. With Klimer, nothing is out of reach.
KPM-8 IN SERVICE DIMENSIONS
ITEM DESCRIPTION DIMENSIONCHASSIS PEDESTAL
ft m ft mA Platform Length 15’ – 55’ 4.57m - 16.76m 15’ – 55’ 4.57m - 16.76m
B Overall cribbing footprint width 13’-4 3/4” min. - 16'-3/4" max.
4.08m min. - 4.90m 6’-0” 1.83m
C Total base width from building face 14’-1 3/4” min. - 20'-8" max.
4.31m min. - 6.30m
8’-6 3/4” min. - 15'-1" max.
2.61m min. - 4.60m max.
D Platform section width 5’-0” 1.52m 5’-0” 1.52m
E Platform extension width 0” min. - 9' max. 0m min. - 2.74m max. 0” min. - 9' max. 0m min. -
2.74m max.
F Total platform width 5’-0” min. - 14' max.
1.52m min. - 4.27 max.
5’-0” min. - 14' max.
1.52m min. - 4.27 max.
G Extension gap to wall face 6” max.** 0.15m max.** 6” max.** 0.15m max.**H Rear outrigger extended length 4’-4” 1.32m N/A N/AJ Distance between outrigger jacks 14’-11” 4.55m 5’-4” 1.63mK Overall cribbing footprint length 20’-11” 6.38m 7’-0” 2.13m
L Front outrigger extended length 1’-8” min. - 4’-4” max.***
0.51m min. - 1.32m max.*** N/A N/A
M Front cribbing pad clearance to building face 9” (min. 1”) 0.23m
(min. 0.03m) 2’-6 3/4” (min. 1”) 0.78m
* Platform extension width can reach up to 9’ with the use of knee braces and increasing the front outrigger extension, L. 30” is the maximum allowable platform extension width for 20” front outrigger length. ** Gap limit may vary by region, consult OSHA and local regulations.*** Front outriggers shall be extended at least 1’-8” or 2/3 of the platform extension width, whichever is greater.
KJ
A
C
FD
E
GM
B
H
CHASSIS PEDESTAL
CFD
E
G
KJ
A
KPM-8 in Service Dimensions
SINGLE MAST
TWIN MAST
TWIN CORNER MAST
M
B
L
1
4
3
2
5
9
7
8
6
1. DRIVE UNIT2. PLATFORM/DECK3. MAST4. GATE & LADDER5. GUARD RAIL6. END GUARD RAIL7. TIE IN SYSTEM8. EXTENSION BEAMS9. BASE TYPE - PEDESTAL SHOWN
(CHASSIS AVAILABLE)
DTD1 D2
E1
DT
D1 D2 D3 D4 D5
E1
L1 L2
L1 L5L3L2 L4
PERSONNEL ONLY, NO MATERIAL STORAGE
PERSONNEL ONLY, NO MATERIAL STORAGE
DM
DTD1 D2
E1
DT
D1 D2 D3 D4 D5
E1
L1 L2
L1 L5L3L2 L4
PERSONNEL ONLY, NO MATERIAL STORAGE
PERSONNEL ONLY, NO MATERIAL STORAGE
DM
TITLE:
CLIENT:
DATE:
DESIGNER:
COMPASS CREATIVE STUDIO INC
201-1040 south service rd
stoney creek, on L8E 6G3
www.compasscreative.ca
KMR_Logo_Reversed_CMYK
Klimer High Performance Platforms
December 2016
Nick Tenhage
CMYK
100/40/0/0
0/0/0/0
CANADA 1-888-526-3262 US [email protected] | klimer.com
KPM-8 SINGLE MAST LAYOUT
KPM-8 TWIN MAST LAYOUT
SECTION LENGTHS & LOADS
DT DM LT D1 L1 D2 L2 D3 L3 D4 L4 D5 L5
ft (m) ft (m) lbs (kg) # plat sect lbs (kg) # plat
sect lbs (kg) # plat sect lbs (kg) # plat
sect lbs (kg) # plat sect lbs (kg)
46.8 (14.3) 31.8 (9.7) 26000 (11795) 1 4000 (1815) 0 0 (0) 5 18000 (8165) 0 0 (0) 1 4000 (1815)
51.8 (15.8) 32.5 (9.9) 25000 (11340) 1.5 3500 (1590) 0 0 (0) 5 18000 (8165) 0 0 (0) 1.5 3500 (1590)
56.8 (17.3) 33.3 (10.1) 24500 (11115) 2 4500 (2040) 0.5 2000 (905) 4 11500 (5215) 0.5 2000 (905) 2 4500 (2040)
61.8 (18.8) 39.0 (11.9) 23900 (10840) 2 4800 (2175) 0.5 2000 (905) 5 10300 (4670) 0.5 2000 (905) 2 4800 (2175)
66.8 (20.4) 44.7 (13.6) 23100 (10480) 2 4800 (2175) 0.5 2000 (905) 6 9500 (4310) 0.5 2000 (905) 2 4800 (2175)
71.8 (21.9) 45.4 (13.8) 22800 (10340) 2.5 5000 (2270) 1 2000 (905) 5 8800 (3990) 1 2000 (905) 2.5 5000 (2270)
76.8 (23.4) 51.2 (15.6) 21000 (9525) 2.5 5000 (2270) 0.5 1500 (680) 7 8000 (3630) 0.5 1500 (680) 2.5 5000 (2270)
81.8 (24.9) 51.8 (15.8) 20800 (9435) 3 4000 (1815) 1 2000 (905) 6 8800 (3990) 1 2000 (905) 3 4000 (1815)
86.8 (26.5) 57.5 (17.5) 20000 (9070) 3 4000 (1815) 1 2000 (905) 7 8000 (3630) 1 2000 (905) 3 4000 (1815)
91.8 (28.0) 63.3 (19.3) 19200 (8710) 3 4000 (1815) 1 2000 (905) 8 7200 (3265) 1 2000 (905) 3 4000 (1815)
96.8 (29.5) 64.0 (19.5) 18600 (8435) 3.5 3200 (1450) 1 2000 (905) 8 8200 (3720) 1 2000 (905) 3.5 3200 (1450)
101.8 (31.0) 64.7 (19.7) 17800 (8075) 4 3200 (1450) 1.5 1700 (770) 7 8000 (3630) 1.5 1700 (770) 4 3200 (1450)
106.8 (32.6) 70.4 (21.5) 17000 (7710) 4 3500 (1590) 1.5 1700 (770) 8 6600 (2995) 1.5 1700 (770) 4 3500 (1590)
111.8 (34.1) 76.2 (23.2) 15000 (6805) 4 3500 (1590) 1.5 1700 (770) 9 4600 (2085) 1.5 1700 (770) 4 3500 (1590)
116.8 (35.6) 76.9 (23.4) 14200 (6440) 4.5 2700 (1225) 1.5 2100 (955) 9 4600 (2085) 1.5 2100 (955) 4.5 2700 (1225)
121.8 (37.1) 82.6 (25.2) 12400 (5625) 4.5 2200 (1000) 1.5 2100 (955) 10 3800 (1725) 1.5 2100 (955) 4.5 2200 (1000)
126.8 (38.6) 88.4 (26.9) 11600 (5260) 4.5 2200 (1000) 1.5 2100 (955) 11 3000 (1360) 1.5 2100 (955) 4.5 2200 (1000)
131.8 (40.2) 89.0 (27.1) 10800 (4900) 5 2000 (905) 2 1700 (770) 10 3400 (1540) 2 1700 (770) 5 2000 (905)
136.8 (41.7) 94.7 (28.9) 8800 (3990) 5 1200 (545) 2 1700 (770) 11 3000 (1360) 2 1700 (770) 5 1200 (545)
141.8 (43.2) 95.4 (29.1) 8000 (3630) 5.5 900 (410) 2 1600 (725) 11 3000 (1360) 2 1600 (725) 5.5 900 (410)
SECTION LENGTHS & LOADS
DT LT D1 L1 D2 L2
ft (m) lbs (kg) # plat sect lbs (kg) # plat
sect lbs (kg)
10 (3.0) 11500 (5215) 0.5 5750 (2610) 0.5 5750 (2610)
15 (4.6) 11500 (5215) 1 5750 (2610) 1 5750 (2610)
20 (6.1) 11120 (5045) 1.5 5560 (2520) 1.5 5560 (2520)
25 (7.6) 10750 (4875) 2 5375 (2440) 2 5375 (2440)
30 (9.1) 10500 (4765) 2.5 5250 (2380) 2.5 5250 (2380)
35 (10.7) 10250 (4650) 3 5125 (2325) 3 5125 (2325)
40 (12.2) 10000 (4535) 3.5 5000 (2270) 3.5 5000 (2270)
45 (13.7) 9750 (4425) 4 4875 (2210) 4 4875 (2210)
50 (15.2) 8250 (3740) 4.5 4125 (1870) 4.5 4125 (1870)
55 (16.8) 5750 (2610) 5 2875 (1305) 5 2875 (1305)
IMPORTANT! Study operator's manual before use. Do not load above recommended safe working loads. Platform loads shown are based on uniformly distributed load including personnel and materials. Maximum 5 people. Extensions (E1) = 0-5 feet (1.5m). For longer extensions, loads will be reduced. Contact your Klimer representative for engineering services. No materials at any time to be placed on platform extensions. For configurations not shown above, consult your local Klimer dealer or operator's manual. This product must be used in conformity with industry safe use and best practices and applicable regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice.
Top Related