• For Worm Gear Reducers operating in ambient temperatures of 20 degrees to 100 degrees Fahrenheit, use lubricant conforming to A.G.M.A. #7 Compounded.
• In addition to lubrication, the unit should have regular inspection to determine the tightness of bolts and screws, misalignment of connected shafts, oil leakage, excessive heating or any unusual noise or vibration.
Approved Lubricants
Maunfacturer Worm Gears A.G.M.A. #7 Compounded
Chevron Oil Co. Cylinder Oil 460X
Gulf Oil Co. Transgear EP 460
Mobile Oil Corp. 600 W Cylinder Oil
Lift Chain Replacement1. Remove back chain guard and broken lift chain.
2. Loosen screws on adjustment blocks.
3. Remove master link from new chain.
4. Assemble chain on H-1336D compactor with open ends at rear.
5. Put master link above the roller and pin (see drawing H-1336D).
6. Tighten chain tension as you would on a bicycle, by lifting adjustment blocks, tighten screws.
7. Put guard on and resume work.
H-1338.37
H-1338.36
H-1338.25
H-1338.25.2
H-1338.25.3
H-1338.25.1
H-1338.25.4
H-1338.26.1
H-1338.26
H-1338.27
H-1338.35 or H-1338.38 orH-1338.39
H-1338.35.1
H-1338.27.1 H-1338.27
H-1338.34
H-1338.33
H-1338.32
H-1338.40 H-1338.29
H-1338.40.1
H-1338.30
H-1338.28.1
H-1338.31
H-1338.28H-1338.40A Completelift catchassembly
Hammer Replacement Parts
Description Model
Clevis pin with screw H-1338.29
Locator guide H-1338.25
Hex head bolt H-1338.25.1
Washer H-1338.25.2
Nut H-1338.25.3
Spacer H-1338.25.4
Hammer handle H-1338.26
Spring pin H-1338.26.1
Hammer rod H-1338.27
Key H-1338.27.1
Hammer weight (complete) H-1338.32
Plug H-1338.33
Spring H-1338.34
Hammer foot, flat H-1338.35
Hammer foot, tapered H-1338.38
Hammer foot, Canadian spec H-1338.39
Screw for foot H-1338.35.1
Lift Catch Replacement Parts
Description Model
Complete lift catch assembly H-1338.40A
Release block H-1338.28
Pin H-1338.28.1
Clevis pin H-1338.29
Lift catch H-1338.30
Spring H-1338.31
Screw H-1338.36
Washer H-1338.37
Release housing H-1338.40
Screw for release housing H-1338.40.1
Top Related