PLAYBACK ON A TV
AV
Press halfway to focus
Press fully to take still image
STILL IMAGE RECORDING
VIDEO RECORDING
Q Open the Lens Cover
R Insert SD Card
INSERTING THE microSD CARD
Q Close the LCD to turn Off the Power
R Attach battery
T Connect the AC adapter to outlet
R Install an microSD Card
SUPPLIED ACCESSORIES FOR THE CAMERA
AVAILABLE ACCESSORIES FOR THE CAMERA
TYPES OF USABLE microSD CARDS
Memory Cards Capacity!
Video (ULTRA FINE)
#Still images
(FINE)
microSDHC Cards
Supports4GB to 8GB
8GB 1hr.50min.9999
4GB 56min.
microSD Cards
Supports256MB to 2GBSD Cards
2GB 28min. 76001GB 14min. 3970
512MB 6min. 1960256MB 3min. 980
Note: Operations are confirmed on the following microSD cards.
Manufacturer Panasonic, TOSHIBA, SanDisk, ATPVideo Class 4 or higher compatible microSDHC card (4 GB to 8 GB)Still image microSD card (256 MB to 2 GB), microSDHC card (4 GB to 8 GB)
Using cards other than those specified above may result in recording failure or data loss.
CHARGING THE BATTERY
Battery Type Charging Time (Approx.) Actual Recording Time (Approx.)BN-VG107U (Supplied) 1hr.50min. 40min.BN-VG114U 2hr.30min. 1hr.25min.BN-VG121U 3hr.30min. 2hr.5min.
Note: The battery pack is not charged at the time of purchase
CAUTION Be sure to use JVC battery packs. If you use any other battery packs besides JVC
battery packs, safety and performance cannot be guaranteed.
Product Name DescriptionBattery Pack BN-VG107U BN-VG114U BN-VG121U
Provides a longer recording time than the battery pack that comes with this unit or it can also be used as a spare battery pack.
Battery Charger AA-VF8
Enables the battery pack to be charged without using this unit.
To order any of these accessory please visit www.JVC.com or call 1-800-858-6442
S Connect AC adapter into DC Terminal
BottomOpen
RECORDING FILES
S Open LCD to Turn on the power
AV
Press
The Mode will be displayed in the LCD
T Set Recording Mode.
AV
Press to Start Recording.The information below will be displayed on the LCD during recording.
832
Battery pack
Cover
Charging in progress:BlinksCharge finished:Goes out
Image Size
Shutter Speed
Image QualityRemaining Number of Shots
Focus
Recording in Progress
Recording Media
Battery Indicator
Video Quality
Remaining Recording Time
Zooming
Recording MediaBattery Indicator
:Record-Standby:Recording in Progress
(Wide angle) (Telephoto)
Press again to Stop Recording.
Scene Counter
Lights up in green when focused
Lights up during still image recording
PLAYBACK VIDEOS
Q Open the card slot cover
Preparation: Turn off both camera and TV.
AV
AV
Q Plug in the supplied A/V cable to the camera. Then push the single plug into the A/V input.R Turn on the camera and the TV.S Press the L button to select the playback mode.T Press the A /B button to select the video or still image mode.U Slide your finger up and down on the Laser Sensor to select the desired thumbnail
for video or still image playback. Then press C button.
TV
AV Cable(Provided)
To AV TerminalVideo Input
Yellow
White
Red
Video Input
Audio Input (L)
Audio Input (R)
Easy Start Guide
This easy start guide is designed to navigate you to using your new Everio quickly. Please refer to the owners manual for a detailed listing of features.
For our online tutorials please visit:http://camcorder.jvc.com/tutorials.jsp
LYT2131-002A-MAC AdapterAP-V30U*
Battery PackBN-VG107U
USB Cable(Type A - Mini Type B)
AV Cable
CD-ROM Basic User Guide
Q Open the LCD monitor to turn on the unit.
R Press L button to select the playback mode.
S Press A /B button to select the video or still image mode.
AV
R SQPress Press
T Select from the index screen (highlight thumbnails) using the Slider.
U Touch the C button.
NOV.01 .2009 04 :55PMNOV.01 .2010 PM04:55
VIDEO PLAYBACK
5
Select
Touch
4
If the aspect ratio of the image is not correct as shown on the right. Change the settings in [VIDEO OUTPUT] from the menu.
To display the cameras on-screen display on TV Set [DISPLAY ON TV] to [ON] from the menu.
16:9 TV 4:3 TV
CHANGING MENU SETTINGS
A To select an Operation icon appearing on the left side, touch the portion of the Slider next to Operation button.
B To select an Operation icon appearing at the bottom of the screen. Touch the buttons underneath them.
USING THE OPERATION BUTTONS
MENUOK
A
B
Select an item from the menu screen.
Q Touch the D button.
R Slide your finger up and down on the Slider.
?
VIDEO
REGISTER EVENT
ZOOM
GAIN UP
TIME-LAPSE RECORDING
SET QUIT
VIDEO QUALITY
3
Select
Touch 1 Touch
2
S Touch the C button.Get
ting
Star
ted
Rec
ordi
ng F
iles
Play
ing
Bac
k Fi
les
Acc
esso
ries
Usi
ng th
e Sl
ider
and
Ope
ratio
n B
utto
ns
110V - 240V
REPRODUCCIN EN UN TELEVISOR
GRABACIN DE IMGENES FIJAS
GRABACIN DE VIDEO
Q Abra la cubierta de la lente
R Introduccin de una tarjeta SD
INTRODUCCIN DE LA TARJETA microSD
Q Cierre el LCD para apagar la alimentacin
R Coloque la batera
T Conecte el adaptador de CA en el tomacorriente
R Insertar una tarjeta microSD
ACCESORIOS SUMINISTRADOS CON LA CMARA
ACCESORIOS DISPONIBLES PARA LA CMARA
TIPOS DE TARJETAS SD UTILIZABLES
Tarjetas de memoria Capacidad!
Vdeo (ULTRA FINA)
#Imgenes fijas
(FINA)
Tarjetas microSDHC
Admite4GB a 8GB
8GB 1h. 50min.9999
4GB 56min.
Tarjetas microSD
Admite256MB a 2GBTarjetas SD
2GB 28min. 76001GB 14min. 3970
512MB 6min. 1960256MB 3min. 980
Nota: Se ha confirmado el funcionamiento con las siguientes tarjetas microSD.
Fabricante Panasonic, TOSHIBA, SanDisk, ATPVdeo Tarjeta microSDHC compatible de clase 4 o superior (de 4 GB a 8 GB)Imagen fija Tarjeta microSD (de 256 MB a 2 GB), tarjeta microSDHC (de 4 GB a 8 GB)
El uso de otras tarjetas que no sean las indicadas anteriormente puede provocar una falla en la grabacin o la prdida de datos.
CARGA DE LA BATERA
Tipo de batera Tiempo de carga (Approx.) Tiempo de grabacin (Approx.)BN-VG107U (suministrado) 1h. 50min. 40min.
BN-VG114U 2h. 30min. 1h. 25min.BN-VG121U 3h. 30min. 2h. 5min.
Nota: La cmara se suministra con la batera descargada
PRECAUCIN Asegrese de utilizar bateras JVC. Si utiliza alguna otra batera que no sea de JVC,
no se puede garantizar la seguridad ni el rendimiento.
Nombre del producto DescripcinBatera BN-VG107U BN-VG114U BN-VG121U
Proporciona un tiempo de grabacin ms prolongado que la batera que viene con esta unidad o tambin se puede utilizar como batera adicional.
Cargador de batera AA-VF8
Permite que la batera se cargue sin usar esta unidad.
Para solicitar algunos de estos accesorios, visite www.JVC.com o llame al 1-800-858-6442
S Conecte el adaptador de CA al terminal de CC.
GRABACIN DE ARCHIVOS
S Abra el LCD para encender la alimentacin
AV
Pulse
En el LCD aparecer el modo.T Ajuste el modo de grabacin.
AV
Presione este botn para iniciar la grabacin.
La informacin a continuacin se visualizar en el LCD durante la grabacin.
AV
Presione hasta la mitad para realizar el enfoque
Presione completamente para tomar una imagen fija
832
Batera
Cubierta
Carga en curso:ParpadeaCarga terminada:Se apaga
Tamao de imagen
Velocidad del obturador
Calidad de imagenNmero restante de tomas
Enfoque
Grabacin en curso
Grabacin de soportes
Indicador de batera
Calidad de vdeo
Tiempo restante de grabacin
Zoom
Grabacin de soportesIndicador de batera
: Espera de grabacin: Grabacin en curso
(gran angular) (telefoto)
Presione nuevamente para detener la grabacin.
Contador de escenas
Se ilumina en verde cuando se ha centrado
Se enciende durante la grabacin de imgenes fijas
REPRODUCCIN DE VDEO
Q Abra la tapa de la ranura para tarjetas
Preparativos: Apague la cmara y el televisor.
AV
AV
Q Enchufe el cable A/V suministrado en la cmara. A continuacin, inserte cada conector en la entrada de A/V.
R Encienda la cmara y el televisor.S Pulse el botn L para seleccionar el modo de reproduccin.T Presione el botn A /B para seleccionar el modo video o imagen fija.U Deslice su dedo hacia arriba y hacia abajo en el sensor lser para seleccionar la
miniatura deseada para la reproduccin de vdeo o imgenes fijas. A continuacin, pulse el botn C.
TV
Cable AV(proporcionado)
Al terminal AV Entrada de vdeoAmarillo
Blanco
Rojo
Entrada de vdeo
Entrada de audio (L)
Entrada de audio (R)
Gua de inicio rpido
Esta gua de inicio rpido est diseada para indicarle cmo utilizar rpidamente su nueva Everio. Consulte el manual de usuario para obtener una lista
detallada de funciones.
Para consultar nuestros tutoriales en lnea, visite:http://camcorder.jvc.com/tutorials.jsp
LYT2131-002A-MAdaptador de CA
AP-V30U*Batera
BN-VG107UCable USB
(tipo A - mini tipo B)Cable AV
CD-ROM Gua bsica para el usuario
Q Abra la pantalla LCD para encender la unidad.
R Pulse el botn L para seleccionar el modo de reproduccin.
S Presione el botn A /B para seleccionar el modo video o imagen fija.
AV
R SQPulse Pulse
T Seleccione la opcin en la pantalla de ndice (vistas en miniatura) utilizando el control deslizante.
U Presione el botn C.NOV.01 .2009 04 :55PMNOV.01 .2010 PM04:55
REPRODUCCIN VDEO
5
Seleccione
Pulse
4
Si la proporcin de aspecto de la imagen no es la correcta, segn la imagen de la derecha. Cambie los ajustes en [SALIDA DE VDEO] del men.
Para visualizar la pantalla de visualizacin de la cmara en el televisor, ajuste [VER EN TV] en [ON] del men.
16:9 TV 4:3 TV
CAMBIO DE AJUSTES DEL MEN
A Para seleccionar que aparezca un icono de funcionamiento en el lateral izquierdo, presione el rea del control deslizante cercana al botn de funcionamiento.
B Para seleccionar que aparezca un icono de funcionamiento en la parte inferior de la pantalla. Presione los botones ubicados en la parte inferior.
USO DE LOS BOTONES DE FUNCIONAMIENTO
MENUOK
A
B
Seleccione una opcin de la pantalla de men.
Q Presione el botn D.
R Deslice su dedo hacia arriba y hacia abajo del control deslizante. ?
VDEO
REGISTRAR EVENTO
ZOOM
GANANCIA
GRAB. POR INTERVALO
AJUSTE SALIR
CALIDAD DE VDEO
3
Seleccione
Pulse 1 Pulse
2
S Presione el botn C.Intr
oduc
cin
Gra
baci
n d
e ar
chiv
os
Rep
rodu
cci
n de
arc
hivo
s
Acc
esor
ios
Uso d
el co
ntrol
desli
zante
y de
los b
otone
s de f
uncio
nami
ento
110V a 240V
Parte de abajoAbierto
C0E3_EasyStartup_B_EN_ES.indd 1C0E3_EasyStartup_B_EN_ES.indd 1 11/4/2009 9:54:38 AM11/4/2009 9:54:38 AM
Preparation: Install the Everio MediaBrowser software onto the PC. Make sure that enough space is left in the PCs HDD. Close the LCD monitor to turn off the camera. Connect the camera to the PC with the USB cable.Q Open the LCD monitor to turn on the camera.R Select [BACK UP] on the Camera.
Everio MediaBrowser starts on the PC.
To USB Terminal
USB Cable(Provided)
AC AdapterTo AC Outlet(110V to 240V)
To DC Terminal
To USB Terminal
S Click [All volume in camcorder] and click [Next].
.
2
Click1
Click
T Click [Start].The Backup starts.
.
Click
FILE BACKUP (Mac Computer)
TRADEMARK
Windows is either registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Macintosh is a registered trademark of Apple Inc. iTunes, iMovie, iPhoto are trademarks of Apple Inc., registered in the U.S. and other
countries. YouTube and the YouTube logo are trademarks and/or registered trademarks of
YouTube LLC.
HOW TO TRANSFER FILES TO iTunes (Windows PC only)
HOW TO UPLOAD A FILE(VIDEO CLIP) TO YouTube (Windows PC only)
Uploading VideosYou can upload your videos to YouTube using the provided software Everio MediaBrowser.Install the software on your PC and connect this unit to the PC. For details on how to use the software, refer to the help file. Installing the Provided Software Connecting this unit to PC
Trouble with Uploading Videos
Check if you have created an account with YouTube.Trouble with Using the Provided Software Everio MediaBrowserConsult the customer service center below. Pixela User Support Center
Region Language Phone #USA and Canada English +1-800-458-4029 (toll-free)
Europe (UK, Germany, France, and Spain)
English/German/French/Spanish +800-1532-4865 (toll-free)
Other Countries in Europe
English/German/French/Spanish +44-1489-564-764
Asia (Philippines) English +63-2-438-0090
China Chinese 10800-163-0014 (toll-free)
For details on how to upload to YouTube or transfer files to iTunes, refer to MediaBrowser Help
Mac USERS
PC USERS HOW TO RECORD A FILE (VIDEO CLIP) FOR YouTube HOW TO RECORD A FILE FOR iTunes
Q Press the L button to select the recording mode.
R Press the A /B button to select the video mode.
S Press the UPLOAD/EXPORT button to display the [UPLOAD SHOOTING] / [EXPORT SHOOTING] menu.
T Select [UPLOAD SHOOTING] and touch the C button. The mode switches between ON and OFF with every touch. After setting, touch the J button.
U Press the START/STOP button to start recording. Recording stops automatically after 10 minutes.
FILE BACKUP (Windows PC)
Q Press the L button to select the recording mode.R Press the A /B button to select the video mode.
S Press the UPLOAD/EXPORT button to display the [UPLOAD SHOOTING] / [EXPORT SHOOTING] menu.
T Select [EXPORT SHOOTING] and touch the C button.
The mode switches between ON and OFF with every touch. After setting, touch the J button.
U Press the START/STOP button to start recording.
You can export videos to iTunes using the provided software Everio MediaBrowser.Install the software on your PC and connect this unit to the PC. For details on how to use the software, refer to the help file. For details on transferring files to iPod, refer to the help file of iTunes.
Trouble with Exporting Files to iTunes
Refer to Q&A, Latest Information, Download Information, etc. in Click for Latest Product Info in the help file of the provided Everio MediaBrowser software.
Trouble with Using the Provided Software Everio MediaBrowser
Consult the customer service center on previous page.
PreparationAlways check available memory space and battery power in advance.
Make sure your battery is fully charged.
A spare battery may be useful.
Stabilizing Your PictureTry these tips to improve the image:
Look for a place to sit down and take your video.
Look for something you can set your camera on.
Consider using a tripod or a monopod to further steady your video.
Camera MovementThe most enjoyable and professional looking videos generally have very little camera movement
Treat all movements as a special effect.
If you must move the camera, do it slowly.
ZoomingAs a general rule, your video will look better if you zoom the lens before you start your recording:
Focus on the subject first, then begin recording.
If you must zoom during a recording, treat it as a special effect and zoom slowly.
ExposureRemember to shoot with the sun or the primary light source behind you.
Keeping the range of contrast in your scene to a reasonable level is the
easiest way to improve the picture quality.
Pay special attention to objects in the LCD screen that appear very washed out or
over exposed.
Making a simple change in how the camera is aimed or by zooming in slightly,
you may reduce contrast to a reasonable range.
Length of RecordingMany recordings are ruined by stopping the recording too soon and missing the best moment:
Always try for at least a 10 second recording.
When in doubt, let the recording continue longer.
It is much easier to edit unneeded material later.
USB jack
To USB port
MENUOK
UPLOAD SHOOTING
EXPORT SHOOTING
SORT
You may use the software supplied with the Mac Computer to view and edit files from the Everio Camera.
Connect the Everio Camera to the Mac Computer using a USB Cable.
Preparation: Load the provided CD-ROM into the PC. In Windows Vista, the auto play dialog box
appears.
Q Click [Easy Installation].Follow the on-screen instructions.
R Click [Next].
S Click [Finish]. Everio MediaBrowser icon is created on the
desktop.
Preparation: Make sure that enough space is left in the Macs HDD. Close the LCD Monitor to turn off the camera. Connect the camera to the Mac Computer with the USB cable.Q Open the LCD monitor to turn on the camera.R Select [PLAYBACK ON PC] on the Camera.
?
USB MENU
CREATE DVDDIRECT DVDUPLOADEXPORT TO LIBRARY
SET QUIT
PLAYBACK ON PC
S Copy and Paste the files to the Mac Computer for backup.
?
USB MENU
CREATE DVDDIRECT DVDUPLOADEXPORT TO LIBRARY
BACK UP
SET QUIT
Saving destination (PC)
USB jack
To USB portNote: Files must be transferred to the Mac Computer for editing.
JVC U.S.A.A Division of JVC Americas Corp.
1700 Valley Road, Wayne, NJ 07470www.jvc.com
Customer ServiceTOLL FREE: 1-800-252-5722
For our online tutorials please visit:http://camcorder.jvc.com/tutorials.jsp
Register your EVERIO online at:REGISTER.JVC.COM
and receive a special offer.
1109MNH-SW-VMC0E3
File
Bac
kup
to C
ompu
ter
Upl
oadi
ng V
ideo
s to
You
Tube
Upl
oadi
ng V
ideo
s to
iTun
es
Rec
ordi
ng T
echn
ique
s
How
to In
stal
l Sof
twar
e
Preparativos: Instale el software Everio MediaBrowser en el PC. Asegrese de que dispone de suficiente espacio libre
en el disco duro del PC. Cierre la pantalla LCD para apagar la cmara. Conecte la cmara al PC con el cable USB.Q Abra la pantalla LCD para encender la cmara.R Seleccione [HACER COPIA DE SEGURIDAD] on the
Camera.El programa Everio MediaBrowser se inicia en el PC.
Al terminal USB
Cable USB(proporcionado)
Adaptador de CAA salida de CA(110 V a 240 V)
Al terminal de CC
Al terminal USB
S Haga clic en [Todo el volumen en la videocamara] y en [Proximo].
2
1
Clic
Clic
T Haga clic en [Comienzo].Se inicia la copia de seguridad.
Clic
COPIA DE SEGURIDAD DE ARCHIVOS (PC Mac)
MARCA COMERCIAL
Windows es una marca registrada o una marca comercial de Microsoft Corporation en los Estados Unidos y/o en otros pases.
Macintosh es una marca registrada de Apple Inc. iTunes, iMovie, iPhoto son marcas comerciales de Apple Inc., registradas en los
EE.UU. y dems pases. YouTube y el logo de YouTube son marcas comerciales y/o marcas comerciales
registradas de YouTube LLC.
CMO TRANSFERIR ARCHIVOS A iTunes (solo PC con Windows)
CMO CARGAR UN ARCHIVO (CLIP DE VIDEO) A YouTube (solo PC con Windows)
Carga de vdeosPuede cargar vdeos en YouTube utilizando el software proporcionado Everio MediaBrowser.Instale el software en su PC y conecte esta unidad al PC. Para obtener ms informacin sobre cmo utilizar el software, consulte el archivo
de ayuda. Installing the Provided Software Connecting this unit to PC
Problemas con la carga de vdeos
Compruebe si ha creado una cuenta con YouTube.Problemas con el uso del software proporcionado Everio MediaBrowserConsulte con el centro de servicio al cliente a continuacin. Centro de soporte al usuario de Pixela
Regin Idioma Nmero de telfono
EE.UU. y Canad Ingls +1-800-458-4029(lnea gratuita)Europa (Reino Unido, Alemania, Francia y
Espaa)
Ingls/alemn/francs/espaol
+800-1532-4865(lnea gratuita)
Otros pases de Europa Ingls/alemn/francs/espaol +44-1489-564-764
Asia (Filipinas) Ingls +63-2-438-0090
China Chino 10800-163-0014 (lnea gratuita)
Para obtener ms informacin sobre cmo cargar en YouTube o trasladar archivos a iTunes, consulte Ayuda de MediaBrowser
USUARIOS DE Mac
USUARIOS DE PC CMO GRABAR UN ARCHIVO (CLIP DE VIDEO) PARA YouTube CMO GRABAR UN ARCHIVO PARA iTunes
Q Pulse el botn L para seleccionar el modo de grabacin.
R Presione el botn A /B para seleccionar el modo video.
S Presione el botn UPLOAD/EXPORT para visualizar el men [CARGAR FILMACIN] / [EXPORTAR FILMACIN].
T Seleccione [CARGAR FILMACIN] y presione el botn C. El modo cambie entre ON y OFF con cada pulsacin. Despus de realizar los ajustes, presione el botn J.
U Pulse el botn START/STOP para empezar la grabacin. La grabacin se detiene automticamente despus de 10 minutos.
COPIA DE SEGURIDAD DE ARCHIVOS (PC con Windows)
Q Pulse el botn L para seleccionar el modo de grabacin.R Presione el botn A /B para seleccionar el modo video.
S Presione el botn UPLOAD/EXPORT para visualizar el men [CARGAR FILMACIN] / [EXPORTAR FILMACIN].
T Seleccione [EXPORTAR FILMACIN] y presione el botn C.
El modo cambie entre ON y OFF con cada pulsacin. Despus de realizar los ajustes, presione el botn J.
U Pulse el botn START/STOP para empezar la grabacin.
Puede exportar vdeos en iTunes utilizando el software proporcionado Everio MediaBrowser.Instale el software en su PC y conecte esta unidad al PC. Para obtener ms informacin sobre cmo utilizar el software, consulte el archivo
de ayuda. Para obtener informacin sobre la transferencia de archivos a iPod, consulte el
archivo de ayuda de iTunes.
Problemas con la exportacin de archivos a iTunes
Consulte Preguntas y Respuestas, Informacin actualizada, Informacin de descarga, etc., en Haga clic para obtener informacin actualizada sobre el producto en la ayuda del software Everio MediaBrowser suministrado.
Problemas con el uso del software proporcionado Everio MediaBrowser
Consulte con el centro de servicio al cliente en la pgina anterior.
PreparativosSiempre compruebe la memoria disponible y la carga de la batera por adelantado.
Asegrese de que la batera est completamente cargada.
Sera til contar con una batera adicional.
Estabilizacin de la imagenIntente seguir estos consejos para mejorar la imagen:
Busque un lugar donde sentarse y grabe su video.
Busque un lugar en el que pueda colocar la cmara.
Tenga en cuenta el uso de un trpode o monpode para que su video no tenga
imgenes movidas.
Movimiento de la cmaraLos mejores videos y ms profesionales generalmente tienen poco movimiento de la cmara.
Considere los movimientos como efectos especiales.
Si es absolutamente necesario mover la cmara, hgalo lentamente.
ZoomComo regla general, su video ser mejor si realiza zoom sobre la lente antes de iniciar la grabacin:
Enfoque el sujeto en primer lugar y luego inicie la grabacin.
Si debe realizar zoom durante una grabacin, considrelo como si fuera un efecto
especial y hgalo lentamente.
ExposicinRecuerde que debe filmar con el sol o la fuente primaria de luz por detrs suyo.
Si mantiene el rango de contraste de su escena en un nivel razonable, ser ms
fcil mejorar la calidad de la imagen.
Preste especial atencin a los objetos en la pantalla LCD que se vean mal o
sobreexpuestos.
Si realiza un simple cambio en la forma en que se enfoca la cmara o acercando
la imagen suavemente, es posible que se reduzca el contraste hasta un rango
razonable.
Longitud de la grabacinMuchas grabaciones se ven estropeadas porque se detiene la grabacin muy repentinamente o porque falta captar el mejor momento:
Intente siempre grabar al menos 10 segundos.
En caso de dudas, contine grabando unos segundos ms.
Es mucho ms fcil editar posteriormente el material que no se necesita.
Enchufe USB
Al puerto USB
MENUOK
CARGAR FILMACIN
EXPORTAR FILMACIN
CLASIF
Es posible utilizar el software suministrado con el PC Mac para ver y editar archivos desde la cmara Everio.
Conecte la cmara Everio al PC Mac utilizando un cable USB.
Preparativos: Introduzca el CD-ROM suministrado en el PC. En Windows Vista aparece el cuadro de dilogo
de reproduccin automtica.
Q Haga clic en [Easy Installation].Siga las instrucciones que aparecen en pantalla.
R Haga clic en [Siguiente].
S Haga clic en [Finalizar]. MediaBrowser se crean el iconos en el escritorio.
COPIA DE SEGURIDAD
Preparativos: Asegrese de que dispone de suficiente espacio libre en el disco duro del Mac. Cierre la pantalla LCD para apagar la cmara. Conecte la cmara al PC Mac con el cable USB.Q Abra la pantalla LCD para encender la cmara.R Seleccione [REPRODUCIR EN PC] on the Camera.
?
MEN USB
CREAR DVDDVD DIRECTOCARGARINSCR. EN LIBRARY
AJUSTE SALIR
REPRODUCIR EN PC
S Copie y pegue los archivos a cualquier carpeta del PC Mac para copia de seguridad.
?
MEN USB
CREAR DVDDVD DIRECTOCARGARINSCR. EN LIBRARY
HACER COPIA DE SEGURIDAD
AJUSTE SALIR
Destino de almacenamiento (PC)
Enchufe USB
Al puerto USB
Nota: Los archivos se deben transferir al PC Mac para su edicin.
JVC U.S.A.Una divisin de JVC Americas Corp.1700 Valley Road, Wayne, NJ 07470
www.jvc.com
Atencin al clienteNMERO GRATUITO: 1-800-252-5722
Para consultar nuestros tutoriales en lnea, visite:http://camcorder.jvc.com/tutorials.jsp
Registre su EVERIO en lnea en:REGISTER.JVC.COM
y recibir una oferta especial.
1109MNH-SW-VMC0S3
Cop
ia d
e se
gurid
ad d
e ar
chiv
os a
un
PC
Car
ga d
e v
deos
a Y
ouTu
be
Car
ga d
e v
deos
a iT
unes
Tcn
icas
de
grab
aci
n
Cm
o in
stal
ar e
l sof
twar
e
C0E3_EasyStartup_B_EN_ES.indd 2C0E3_EasyStartup_B_EN_ES.indd 2 11/4/2009 9:54:39 AM11/4/2009 9:54:39 AM
Top Related