LINE TECH Positioning Units compactReady-to-install Compact Positioning Units with drive
LINE TECH | 2
30
78
30
70
155
59
10028 28
15643.5
ø10
h7
ø38
h7
6 33 LM = L - 53
L = Hub + 230L = Stroke + 23035
HubStroke 30.5
10.5 39.5 39.5
10 25 2530
3090
6
3.5
20
12xM6 x 9
4xM6 x 12
Y
Z
Mx
Cy1
Cy2
Cz1Cz2
My
Mz
LINE TECH Positioning Unit compact
A
A155
167
78
180
16
15
5
7.05
2.5
11.5
Drive Carriage
Limit switch
Bracket
Extrusion
Cover profile
Linear guide
Dimensions
LINE TECH-Positioning unit compact
Weight calculation: 6.67 kg + (Hub / 100 * 1.15 kg)
LINE TECH-Positioning-Units-Compact are modular designed, ready-to-install linear carriages with drive unit. Sealed guide elements are employed. Rolled ball screws are primarily used as drive units. The guides and drive elements are protected by a cover profile against the intrusion of dirt, chips, etc.The basic and cover profile are made of aluminium alloy and manufactured by ext-rusion process. Integral limit switches on the cover profile together with motor and control unit, ensure correct positioning of the carriage and prevent overrunning.
The selected design provides, by com-pact dimensions, a high level of perfor-mance.
Design
3 | LINE TECH
80
6.5
10 60 10
ø10.5
5
ø6.5
12.5
16
18
6.25
LINE TECH Positioning Unit compact
Description Maximum forces [kN] Maximum torques [Nm]
Static Dynamic Static Dynamic
Cy01,2 Cz01,2 Cy1,2 Cz1,2 Mx0 My0 Mz0 Mx My Mz
PE-compact 155 x 78 70.0 70.0 36.0 36.0 3 130 3 227 3 227 1 736 2 404 2 404
The determination of dynamic load ra-tings and torques are based on a 50‘000 m stroke. If comparitive values must be
calculated for 100‘000 m stroke, the valu-es for Mx, My, Mz and C must be divided by the factor 1.26
Expedient load
With a view to durability, loads of less than 20% of the dynamic load ratings have generally proved to be expedient.
Accessories
Technical datas
Size
Str
oke
per
revo
lutio
n
Axi
al p
lay
Axi
al lo
ad r
atin
gs
Po
sitio
ning
accu
racy
Rep
eat
accu
racy
Max
. sp
eed
Mo
men
to
f in
ertia
Max
. len
gth
Fee
d a
ndfr
ictio
n fo
rce
Idle
to
rque
Mo
ved
wei
ght
p Cdyn C0 vmax IY IZ Lmax FV ML mb
[mm] [mm] [N] [N] [µm/mm] [+/- mm] [m/s] [cm4] [cm4] [mm] [N] [Nm] [kg]
155 x 78
5
0.07 6 950 3 400 52/300 0.01 5.0 56 745 3 000 60.00
0.03 4.380
10 0.06 4.400
16 0.12 4.450
The mounting of the Positioning-Unit- Comapct is made by brackets. Mounting of these units can only be made on the basic, not to be fixed on the endplates.
Ordernumber of brackets: P-54044/1
Preferred types
Technical datas (continuation)
Note on dynamic load ratings and torques
100 200 300 400 500 600 800 1000 1200 1400 1600 2000 2500 3000
16 x 5
16 x 10
16 x 16
Stroke[mm]
Drive Stroke 423 mm preferred types
LINE TECH AGEuropastrasse 19CH-8152 GlattbruggPhone +41 43 211 68 68Fax +41 43 211 68 [email protected]
LINE TECH controls and drives are specifically designed for single-axle and multi-axle positioning units. The wide range of products includes continuous- and linear path control systems as well as step motors, DC and AC servo mo-tors and thus meeting any requirement of control systems.
Besides the manufacture of components, LINE TECH specializes in the develop-ment of system solutions. It goes without saying that this includes commissioning by LINE TECH customer service upon request.
The LINE TECH product range includes mechanical, electrical and electronic components which meet all the require-ments of modern handling technology and special purpose machine building.
Due to their superior design character-istics LINE TECH positioning units and LINE TECH linear modules – linear car-riages of modular design – are ideally suited for applications with high precision and performance requirements. Various sizes and a multitude of drives allow ap-plication specific problem solving.
Your LINE TECH representative:
Product range
is
a re
gist
ered
trad
e m
ark
of L
INE
TE
CH
AG
. ©
LIN
E T
EC
H A
G ·
06-2
012
· e ·
Sub
ject
to d
esig
n ch
ange
s
Top Related