LEGAL PROJECT MANAGEMENT
Cost management of litigation is becoming a focus of legislators in both Australia and the
UK, in an attempt to streamline litigation and ensure costs are proportionate. The Civil
Procedure Act 2010 (Vic) introduces cost budgeting as part of case management of trials.
Lord Justice Jackson in his report on English Civil Litigation Costs, has recommended
Judges settle cost budgets. This is now being trialled throughout the U.K.
When faced with estimating costs, many lawyers respond "How long is a piece of string?"
Providing clients with an accurate estimate of legal costs, with serious penalties for failure to
do so, has been a feature of the Australian legal landscape for a number of years. Use of
alternative pricing methodologies is also increasing as a result of client pressure for cost
certainty. Effective cost management is the only means of addressing these two issues.
Cost Management
Cost management has two facets - cost budgeting (including case planning), and matter
management to keep the costs within budget. In other words, it requires the application of
some basic project management skills. Effective cost management also requires a change
of mindset for many lawyers acceptance of the maxim "Better is the enemy of good".
In managing any project, small or large, there will be a number of steps. The amount of
work which goes into each step will vary depending on the complexity of the matter. On a
practical basis, there is no point in spending hours in planning and managing a matter that is
only going to involve a couple of hours work. But even for the smallest matter, a little time
spent planning will reap benefits.
Planning involves balancing what is know in project management circles as “the iron
triangle”
Time Scope
Resources
2
It also involves balancing a second triangle which comes from manufacturing:
This where the mantra “better is the enemy of good” comes into play. The difference in
terms of cost and time in improving a document from 90% to 95% perfect is often not
justified.
Steps in Project Management
• Define the project. Understand and scope what needs to be done – agree the objective
and what “done” looks like. In project management terms, this is the project charter and
statement of work.
• Risk Management - Identify risks and gaps and plan how to deal with the major ones.
• Developing the strategy - plan what work needs to be done to achieve the objective. In
project management terms, this is developing the work breakdown structure (WBS).
• Developing the roadmap - Plan who will do the work, when the work will be done and
assign tasks. In project management terms, this is the critical path.
• Establish the budget – price the work, taking risks, assumptions and contingencies into
account.
• Agree a communications strategy – for the client, and for the project team.
• Manage the projects – in time, to agreed quality and to budget.
• Identify and negotiate changes in scope.
• Review the matter at conclusion for lessons learned.
Let’s look at each in turn.
Time Cost
Quality
3
The Project Charter and Statement of Work (SOW) - Working out what
the client wants, what the client needs, and what you can deliver
The project charter is the document which gives authority for the project. It will detail the
project description (what), the client objectives and reason for the project (why), the project
deliverables (acceptable outcomes) and the statement of work. It may also detail the
justification for the project, resources, stakeholders, stakeholder requirements, the overall
requirements (including resources allocated), and approval requirements (who has final sign
off).
For lawyers, it will often be contained in the client retainer agreement.
The statement of work defines the scope of the project including what is within scope and
what is excluded. It also details assumptions regarding the extent of the work, how and
where the work will be undertaken, and the responsibilities of the client.
Careful scoping of the work is vital for a successful project, and mandatory if a fixed fee is to
be charged. Accurate scoping involves taking comprehensive instructions from the client
about both legal and business/personal expectations. Part of this should include discussing
the client's expectations on costs. Communication is the key to avoiding cost disputes, and
it is important, from day one, to manage expectations as to both result and cost.
The discussion about the client's expectations should canvas their level of involvement in the
matter and their expectations of you as a lawyer. Are they the sort of client who requires
detailed written reports on progress, or who phones once a day? Do they "need their hand
held"? Are they happy to take on some of the work themselves e.g. undertaking preliminary
review of discoverable documents?
Identify the objective
Agreeing the objective is the starting point for scoping the work and ensuring that the
outcome meets the client’s expectations.
Ask the questions:
• What does the client want?
• Why does the client want this?
• What is the problem to be solved?
• What does the client need (may be different from what they want)?
• What outcomes are possible?
• What outcomes are acceptable?
4
• Does the client have a budget or expectation about the level of cost?
• Are there deadlines?
• What is a realistic schedule?
• Who is the final decision maker at the client?
• How does the client define value?
This latter question can clarify the focus on the matter. It can lead to a discussion about the
value you are delivering, (which is not measured by the hours you spend on the matter).
The answer helps define what the client sees as a reasonable ROI, and can result in a
change of scope, in order to meet the expected ROI.
In large, complex projects you might have separate objectives for each stage of the project
or perhaps even separate objectives for different team members working on different
aspects of the project.
Risk Management - Identify risks and gaps and plan how to deal with
the major ones
Brainstorm the possible risks. Brainstorming and mind mapping can be great tools,
particularly when used with a team! This should be done with the whole team because when
people identify what can go wrong, they are more likely to take steps to avoid the risk, and
are prepared to deal with something if it happens.
Some risks often not taken into account are:
• Other parties involved in the matter and their likely attitude
• The relationship between the parties
• The nature of the opposing lawyer and previous experience of same
• The availability and likely cooperation of witnesses
• Resource availability
• Lack of Skills
• Wrong resource
• Under/over resourcing
• Unclear methodology
• Lack of access to information
• Client/opposing lawyer churn
• Political/Policy
5
Use a risk analysis template to identify the risks that would have the most impact, and then
plan how these can be avoided, mitigated, or resolved. You don’t have to plan to deal with
every possible risk – choose the most significant.
Define the scope of work
Once you have identified the objective, the next step is to create the statement of work,
which sets out the objective and defines the project scope. It should set out what “done” will
look like.
Just as important as setting out what work is within the scope, is detailing the exclusions
(what you are not going to do), and the assumptions.
Examples of assumptions include:
• What work is going to be undertaken by the client (e.g. that they will undertake initial
vetting of all documents in their possession)
• The present state of play with existing documentation/instructions (e.g. that all relevant
documents have been disclosed by the other party).
• The likely timing of matters which are dependent on third parties (e.g. that the expert
witness statement will be provided within 1 month of the witness receiving formal
instructions).
• Limits on negotiations or numbers of drafts of documents.
• Any uncertainties that may significantly vary the scope.
• Timeframes – deadlines are likely to increase costs due to the need to add additional
members to the team.
It is a matter of judgement as to how far you go in detailing scope, exclusions and
assumptions. It may also be a matter of pressure – time pressures, or pressure from the
client to just get on with the job. But the larger the matter, the greater the risk of argument
down the track, if you do not prepare a detailed scope of work.
The statement of work needs to be provided to all team members so that everyone is on the
same page about what is being done. For litigators, the team is likely to include counsel.
Developing the Strategy – what needs to be done, how and when?
In any large matter, break the work into phases. It's easiest to identify the big rocks and
then fill in the gaps with the pebbles and sand. But remember to add to the cement.
Let's look at an example in litigation.
6
Big Rocks
• Initial instructions
• Preparing pleadings
• Preparing witness statements
• Discovery
• Interlocutory hearings
• Mediation
Pebbles
• Initial instructions
o Receive and review initial instructions
o Undertake preliminary review
o Identify crucial documents and witnesses
o Plan the matter and create a budget
• Preparing pleadings
o Interviewing the client to take instructions for a statement of claim
o Reviewing documents to the purpose of drafting statement of claim
o The initial draft of the statement of claim
o Second review of the statement of claim
o Preparing a brief to counsel to settle the statement of claim
o Reviewing the statement of claim settled by counsel
o Sending a settled statement of claim to the client
o Discussions with the client to confirm the statement of claim
o Reviewing the final draft
o Filing with the court
o Arranging service on the defendant
Sand
• Initial instructions
o Receive and review initial instructions
� Open new file, create database information for use with practice
management software
o Undertake preliminary review
� Research law
o Identify crucial documents and witnesses
� Provision of advice to the client about possible options to enable them to
provide instructions about what to be included in the client
7
� Provision of advice regarding possible settlement options to be explored
prior to proceedings being issued
� Possible work in settlement negotiations
o Plan the matter and create a budget
� Additional time required to clarify any the client's expectations wants and
needs prior to finalisation of the statement of claim
• Preparing pleadings
o Interviewing the client to take instructions for a statement of claim
� Making arrangements to interview witnesses
� Possibly a second interview required after review of documents provided
or to clarify initial instructions
o Reviewing documents to the purpose of drafting statement of claim
� Obtaining the relevant documents from the client
� Identifying and obtaining missing or additional documents required
� Collating the document so that they are in a useful order
o The initial draft of the statement of claim
� Any research on points of law
� Going back to the client to clarify instructions
� Identifying further people who need to be spoken to obtain instructions
� Going back to the documents to clarify aspects
� Identifying any precedents which may be of use
Cement
• Use of precedents
• File management time
• Project management time – team meetings, strategic planning
• Time spent reviewing file to get back up to speed, where breaks in the work
• Team management including monitoring of progress of team members
• Internal conferences
• Delegation and supervision work
• “Blow out” work arising from risks which are being assumed
• Reporting work
• Hand holding work
The size of the matter will determine the level of granularity required. Sometimes
undertaking this process will identify areas where you need to get clarification from the client
about how the work should be done, or whether they actually want to undertake the work.
8
Tasks must be specific and descriptive of a specific outcome. The task “research” is non
specific. The task “research the interpretation of 'controlled waste' as defined in Section 3(1)
of COPA – dot point memo” is far more meaningful for the team.
Creating the Roadmap – Creating your team and assigning tasks
Once you have identified the tasks, you can create the roadmap, which is a plan of when the
tasks are to be undertaken. This plan of tasks helps identify where parallel tasks can be
undertaken, sequencing of tasks, priorities and dependencies, and ways in which a schedule
is best managed. It provides a realistic schedule by highlighting what tasks cannot be
commenced until prior tasks are completed. The major advantage of creating this road map
and sequencing tasks, is identifying dependencies and possible resource constraints, both of
which can have significant impacts on a schedule. Predecessor tasks can be prioritised to
avoid delay with dependant tasks.
Your sequenced plan of tasks will help you identify the critical path, which is the longest path
through all necessary tasks.
Once you have the plan, look at what could be eliminated, what could be streamlined, what
should be prioritised, what will deliver the most value to the client?
One benefit of this planning process is the ability to have discussions with client about fees
and value. You will be better able to explain what you are proposing to do, and if there is an
issues with fees, you may be able to discuss carve outs of work.
The roadmap/critical path is the blueprint for your project and should be distributed to the
whole team (including client and counsel), are reviewed at all team meetings. It will be the
reference point to judge progress and a means of alerting to the project going off track.
Assigning Tasks
Who has the right skills and experience to do the work? Who is available? What should be
delegated down?
What should be delegated up? Delegating up should occur when timing is important, and it
is preferable that the work be done more quickly by a senior person, or to reduce the
possibility of bottlenecks
Before finally assigning a task, discuss with the team member and obtain their agreement to
take on the task.
9
Balance planning – some people get bogged down in the planning phase and don’t get the
work done. But too little planning increases the likelihood of the budget being wrong or the
matter going off the rails because risks were not identified, time blows out, or work is done
inefficiently.
Delegation skills
Always make clear:
• What needs to be done,
• Suggestions about how, including any precedents or other guidance,
• When – time expectations and deadlines,
• Expected outcome (e.g. a 3 page advice),
• Why – explain in the context of the bigger picture (provide them with the SOW),
• Any other limitations (e.g. predecessor tasks, we do not need to research point A, only
point X),
• Any support or help they may need.
Ask if the team member thinks what they are being asked to do is achievable within the time
frames set. Encourage them to seek clarification of any of the above. It can be good to ask
a team member to explain their understanding of what needs to be done to ensure you are
on the same page. Ask them how long they think they will spend on the task to ensure it ties
in with the budget.
Give ownership – don’t micromanage. It’s unusual that work has to be undertaken in one
way only. Set clear lines of responsibility.
People communicate in different ways – some need emails, some need to talk. Talking can
work matters through. Visual planning is very helpful and works particularly well for some
people.
Give feedback, particularly when positive!
Establish the budget – price the work taking risks and contingencies
into account
Budgeting will often involve a review of comparable, completed files to cost the work
involved, identify areas where efficiencies can be achieved, possible areas of “blow-out”,
appropriate staffing and resources, and timing of work.
10
Estimate the time each task is likely to take. Goals need to be realistic for each team
member taking their skills, strengths, experience and weaknesses into account, together
with their existing workload. The best way to deal with this is to ask the team member to
estimate how long they think the task will take. If this is longer than you think appropriate,
discuss this with the team member.
Studies show we underestimate time by >25%. We are always optimistic about how long
something will take. Adapt your estimate accordingly. Also, factor in the “cement work” –
add 10-20%.
Add a contingency factor to accommodate risks. This will depend on the matter, but could
be as high as 100% if the instructions are particularly unclear, or if there are particularly
unusual legal or factual issues.
In smaller matters, you can look at costs on previous similar matters. But when looking at
historical information, take the following into account:
• If time was written off/not recorded because the original fee estimate was too low.
• Any differences between the past matter and the current.
• Who worked on the past matter.
• That there should have been a value component to reflect experience or use of
precedents.
For large matters you might prepare both an optimistic and pessimistic budget and then look
at the weighted average. A weighted average formula applied by many project managers is:
Optimistic + Pessimistic + (4 x Most Likely)
6
Often, you are likely to have a feel for what price the matter will bear. But also take into
account that you don’t want to undertake work where the price will result in a loss.
Don’t go down the loss leader track – and tell your client you won’t. If necessary, explain
what work is required and why. Be able to explain the cost drivers and give the client
options e.g. interview fewer witnesses, get the client to do some of the work, use counsel for
some aspect, offer a more junior (or more senior!) lawyer to do some of the work.
The involvement of counsel is one of the challenges for litigators in establishing a budget. If
you are including counsel as part of your team and part of your budget, you need to ensure
counsel have either agreed to your proposals, or are aware of the limitations when you brief
them.
11
Manage the projects – time, quality and to budget
Keep in mind the big picture and the overall objective! Don’t get caught up chasing rabbits
down burrows. Do a quick review of the roadmap/critical path at every team meeting.
Make sure the team is aware of possible roadblocks and the plans to avoid these. Set clear
expectations about deadlines. If necessary, discuss with team members how they are going
to meet the deadline, given other workloads.
Manage the matter – track cost against budget, and progress against timelines. Identify
early if things are going awry and work out a solution. If there is a change in scope, discuss
this with the client and renegotiate the fee.
Communications Strategy
Effective communication is one of the hallmarks of a successful project and therefore, best
practice mandates developing communications strategies for the client and for the project
team. In working with clients, I have found it a common complaint that the client is not
consulted about what they would like to know, and how they would like to receive the
information. Sample communication plans are attached. Any communications plans should
include all relevant members of the team, including counsel.
Two powerful tools are a RACI1 matrix, and the use agendas (with timings) for team
meetings (including conferences with counsel). Too often meetings between lawyers run
more as brainstorming sessions, rather than structured meetings with agendas. The focus
should be on bringing agenda items to resolution if possible. Meetings should be minuted, if
only in dot point form.
Communicate the Statement of Work and Roadmap to the whole team. Cost blowout occurs
when someone undertakes a task in isolation and does not understand its context as part of
the big picture. It’s also important to work out the practicalities of working in the big picture
e.g. if multiple people are working on different parts of a document, it is better to mandate
the numbering format to reduce the time subsequently spent in formatting.
1 Responsible, Accountable, Consulted, Informed
12
Identify and negotiate changes in scope
Keep the statement of work in mind and review frequently, so you can quickly be aware of
change in scope. However, you need to be pragmatic about when you seek to negotiate a
change in scope. Is it a true change of scope or a risk that you did/should have identified?
Lessons learned
End of matter audits are powerful ways of improving case management, by identifying what
went wrong, what went right, further training required for team members, particular skills
identified which could be used in future, issues with the client which need to be identified as
future risks.
In a more limited format, they can and should be used to obtain client feedback about how
they thought the matter was handled.
To conclude – some laws of project management
• A client is someone who tells you what they want the day you give them what they asked
for.
• Any project can be estimated accurately (once it is completed).
And a final word from Douglas Adams
“I love deadlines. I love the whooshing noise they make as they go by”
13
Communications Plan for the client
What Why Who When How
Project Justification
Determine client needs and justification, agree scope and authorization to proceed
Client decision makers, project manager (responsible lawyer)
At commencement, and as required for updates and approval
Meeting, telephone call
Strategy Consideration
Presentation of options and agreement regarding approach to be adopted
Client decision makers, project manager
At commencement, and as required where options regarding strategy to be considered
Meeting, telephone call, email
Stakeholder Expectations
Determination of scope, clarification of work to be undertaken by client and lawyer
Client decision makers, client team, project manager
At commencement, and as required where change in strategy/scope
Meeting, telephone call, email
Project Authorisation
Agreement re project charter and statement of work, and authorisation for project to proceed
Client decision maker – principle contact (Client contact), project manager
At commencement Formal acceptance in writing
Issue Resolution Raising issues which may impact on project success, or where further instructions required
Client contact, client team, project manager, project team members
When issues occur Formal report on issue (letter or email), meeting, telephone call, email
14
Status Report Report on current status, time frames and completed task, open tasks and high level schedule
Client contact, client team, project manager, project team members
Weekly Formal report by email
Change of scope request
Request for approval of change of scope
Client decision makers, project manager
As required where change in strategy/scope
Telephone call followed by letter or email, , meeting if significant change
Change of scope authorisation
Approval of change of scope
Client decision makers, project manager
As required where change in strategy/scope
Formal acceptance in writing, Updated in wiki
Completion report Acknowledgement of completion, sign off by client of successful completion
Client contact, client team, project manager, project team members
At conclusion of the matter or at milestones
In writing, if appropriate also meeting
End of matter review
Feedback from client regarding satisfaction with the project and how it was conducted Report both as to content and process improvements, and performance appraisals
Client contact, client team, project manager, project team members
At conclusion of the matter
In meeting, or in writing as appropriate given nature of the matter
15
Communications Plan for the project team
What Why Who When How
Risk Identification To identify risk and develop risk management strategies
Project manager and team members
At commencement and periodically in team status meetings
Meeting
Critical Path Analysis
To ensure clear understanding of all tasks, and identification and monitoring of those which can impact schedule and costs
Project manager and team members
At commencement and reviewed in weekly meetings
Formal document on wiki
RACI Matrix To define task allocation and responsibility, and reporting requirements
Client contact, client team, project manager, project team members
At commencement and updated at team meetings as required
Formal document available on wiki
Individual Status Report
To monitor status of the project against schedule and budget
Team members, project manager
Weekly Email, or updating on blog
Team Status Meetings
Review current status of the project against schedule and budget, identify issues
Team members, project manager
Weekly Meetings, with agendas and minuted
Team Project Status Report
Report on current status, time frames and completed task, open tasks and schedule
Project manager, project team members
Weekly Formal report sent by email updated after each team status meeting
16
Issue reporting and logging
Monitoring of issues and risks
Project manager, project team members
On going Updated in wiki
Change of scope authorisation
Approval of change of scope
Client decision makers, project manager
As required where change in strategy/scope
Formal acceptance in writing, Updated in wiki
End of matter evaluation
Appraisal of project performance for identification of content and process improvements
Project manager, project team members
At conclusion of the matter
Formal report
Lessons learned Distribution of information regarding content and process improvements for use in future projects
Project manager, project team members
At conclusion of the matter
Updated on Firm internal website and discussed at monthly staff meeting
Top Related