REV A 10-15-2020
23/8” (60mm) minimum backset required
LARGE MULTI POINT ENTRY SETS - MODERN RECTANGULAR STYLE, AMERICAN CYLINDER
EMTEK PRODUCTS INC. Tel: (800) 356-2741 Fax: (800) 577-5771 emtek.com [email protected]
17 1/2" 17 1/2"
1/2"" "
Exterior Trim Interior Trim
REV A 10-15-2020
23/8” (60mm) minimum backset required
LARGE MULTI POINT ENTRY SETS - MELROSE STYLE, AMERICAN CYLINDER
EMTEK PRODUCTS INC. Tel: (800) 356-2741 Fax: (800) 577-5771 emtek.com [email protected]
2 7/8" 2 7/8"
17 1/2" 17 1/2"
1/2"
Exterior Trim Interior Trim
REV A 10-15-2020
23/8” (60mm) minimum backset required
LARGE MULTI POINT ENTRY SETS - ARCHED STYLE, AMERICAN CYLINDER
EMTEK PRODUCTS INC. Tel: (800) 356-2741 Fax: (800) 577-5771 emtek.com [email protected]
17 1/2" 17 1/2"
1/2"" "
Exterior Trim Interior Trim
3-5/8”
4-1/2"
4-1/2"
(92mm)
2-3/8”(60 mm)
minimumbackset
Specification Sheet for Trim and Cylinder Styles LARGE MULTI POINT ENTRY SETS
Steel Spindle
Rosette Screws
Cylinder Tailpiece
CONSTRUCTION KEYING
Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.
Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
- Construction devices used on one or more of last four positions.
- Dimples drilled in plug in this position.
• Lost ball system.• Last four pin locations drilled for lost ball application.• Master key pins used for code variability.• Construction keys and owner keys sent separately.• Order by indicating “Construction Keyed, House #_” next to applicable locks.
Keyed Plates with American Cylinder Includes non-keyed thumbturn inside
Standard Components:• Single Cylinder Tailpiece• 4 ½” Steel Spindle• 2” Rosette Screws
Standard Components:• Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 ½” Rosette Screws for 1 5⁄8” thick door
Extended Components:• Long Single Cylinder Tailpiece• 5” Steel Spindle• 2 ½” Rosette Screws• 3” Cylinder Screw
Extended Components:• Long Thumbturn Tailpiece• 4 ½” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 ½” Rosette Screws• 2” Rosette Screws for 2” - 2 1⁄8” thick door
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
Standard Door Thickness: from 15/8” to 2”
Standard Door Thickness: from 15/8” to 2”
Extended Door Thickness: Over 2” to 23/8”
Extended Door Thickness: Over 2” to 23/8”
CylinderScrew
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.LARGE MULTI POINT ENTRY SETS Specification Sheet for Components and Door Thickness
Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)
Non-Keyed with Cylinder Plugs, Passage (for Semi-Active Door)
Non-Keyed with Cylinder Plug, American Style Thumbturn Inside (for Active Door)
Non-Keyed with Cylinder Plugs, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Dummy Pair with Cylinder Plugs (for Non-Active Door)
3-5/8” 12-1/2”
1/2”
3-5/8” 12-1/2”
1/2”
Fixed
Fixed
Fixed Fixed
Fixed Fixed
American Cylinder Above Handle
American Cylinder Above Handle
American Cylinder Above Handle
American Cylinder Above Handle
American Cylinder Above Handle
American Cylinder Below Handle
American Cylinder Below Handle
American Cylinder Below Handle
American Cylinder Below Handle
American Cylinder Below Handle
Cylinder Plug
REV A 10-15-2020
23/8” (60mm) minimum backset required
LARGE MULTI POINT ENTRY SETS - MODERN RECTANGULAR STYLE, EURO CYLINDER
EMTEK PRODUCTS INC. Tel: (800) 356-2741 Fax: (800) 577-5771 emtek.com [email protected]
17 1/2" 17 1/2"
1/2"" "
Exterior Trim Interior Trim
REV A 10-15-2020
23/8” (60mm) minimum backset required
LARGE MULTI POINT ENTRY SETS - MELROSE STYLE, EURO CYLINDER
EMTEK PRODUCTS INC. Tel: (800) 356-2741 Fax: (800) 577-5771 emtek.com [email protected]
2 7/8" 2 7/8"
17 1/2" 17 1/2"
1/2"
Exterior Trim Interior Trim
REV A 10-15-2020
23/8” (60mm) minimum backset required
LARGE MULTI POINT ENTRY SETS - ARCHED STYLE, EURO CYLINDER
EMTEK PRODUCTS INC. Tel: (800) 356-2741 Fax: (800) 577-5771 emtek.com [email protected]
17 1/2" 17 1/2"
1/2"" "
Exterior Trim Interior Trim
Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.
3-5/8”
4-1/2"
4-1/2"
(92mm)
LARGE MULTI POINT ENTRY SETS Specification Sheet for Components and Door Thickness
CUSTOM KEYINGCharge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.
Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.
Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.
Steel Spindle
Rosette Screws
Full Euro Profile Cylinder
CylinderScrew
Full Euro Profile Cylinder Half Euro Profile Cylinder
CY4-ERSGL35
CY4-ERSGL32 CY4-ERHLF19TT
CY4-ERHLF21TT
Keyed Plates with Euro Profile Cylinder
• 3 5⁄32” (3.16”) Euro Profile Cylinder• 4 ½” Steel Spindle• 2” Rosette Screws
• 3 17⁄32” (3.54”) Euro Profile Cylinder• 5” Steel Spindle• 2 ½” & 3” Screws
Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 23/8”
• 1 31⁄32” (1.98”) Euro Profile Cylinder• 4 ½” Steel Spindle• 2” Rosette Screws
• 2 5⁄32” (2.15”) Euro Profile Cylinder• 5” Steel Spindle• 2 ½” & 3” Screws
Non-Keyed Plates with Euro Profile Half Cylinder
Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 23/8”
Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)
• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 ½” Rosette Screws for 1 5⁄8” thick door
• 4 ½” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 ½” Rosette Screws• 2” Rosette Screws for 2” - 2 1⁄8” thick door
Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 23/8”
2-3/8”(60 mm)
minimumbackset
Specification Sheet for Trim and Cylinder Styles LARGE MULTI POINT ENTRY SETS
Keyed with Euro Profile Cylinder (for Active Door, Schlage® Keyway Standard, Rekeyable)
Non-Keyed with Cylinder Plugs, Passage (for Semi-Active Door)
Non-Keyed with Cylinder Plug, Euro Profile Style Thumbturn Inside (for Active Door)
Non-Keyed with Cylinder Plugs, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)
Dummy Pair with Cylinder Plugs (for Non-Active Door)
3-5/8” 12-1/2”
1/2”
Fixed
Fixed Fixed
Euro Cylinder Below Handle
Euro Cylinder Below Handle
Euro Cylinder Below Handle
Euro Cylinder Below Handle
Euro Cylinder Below Handle
Cylinder Plug
Top Related