Evaporadores de doble flujo industrial Kobol (series EXA, EXR y EXC)
Capacidades de refrigeración Las capacidades que se muestran en la tabla se realizan
conforme al estándar ENV328 en la condición 1 (0ºC de
temperatura de evaporación, aire entrante a +10ºC) para
la serie EXA, en la condición 2 (-8ºC de temperatura de
evaporación, aire entrante a 0ºC) para la serie EXR y en
la condición 3 (-25ºC de temperatura de evaporación,
aire entrante a -18ºC) para la serie EXC. (En ambos casos
se requiere que la superfi cie de las aletas esté seca).
Selección de la unidad de las series EXA, EXR y EXC:
Las capacidades se indican para el refrigerante R-404A.•
El DT corresponde a la diferencia entre la temperatura •
del aire entrante y la temperatura de evaporación en la
salida del evaporador.
T• ev designa la temperatura de evaporación en la salida
del evaporador.
Están disponibles ventiladores de dos velocidades.•
Multiplique la capacidad indicada por el factor •
correspondiente para obtener el rendimiento con el
refrigerante seleccionado.
Kobol Industrial Dual Discharge Unit Coolers - EXA, EXR & EXC Series
Cooling capacities The duties shown in the table are at ENV328 standard
condition 1 (0ºC saturated suction temperature, +10ºC
air entering) for the EXA , Condition 2 (-8ºC saturated
suction temperature, 0ºC air entering) for the EXR series
and condition 3 (-25ºC saturated suction temperature,
-18ºC air entering) for the EXC series. (Dry fi n surface
conditions for both cases)
Unit selection EXA, EXR and EXC series:Capacities are shown for R-404 A refrigerant•
TD is the difference between the entering air •
temperature and the saturation suction temperature
at the cooler outlet
T• ev: saturated suction temperature at cooler outlet
Two fan speed available•
Multiply shown capacity by appropriate factor to give •
performance with chosen refrigerant
EXA EXR EXC
R-134a 0,93 0,91 0,85
R-22 0,95 0,95 0,95
IMPORTANT NOTE: Decimals are used in the following format: x,xx (example 5,23) Thousands are used in the following format: xxxx (example 1264)
EXA series / Serie EXA Fin spacing / Paso de aletas: 3 mm
High Speed : 1350 rpm / Alta velocidad: 1350 r.p.m
R-404 A
MODEL
MODELO
CAPACITY
CAPACIDAD
ENV 328
COND. 1
Tev
= 0ºC SURFACE
SUPERFICIE
AIR FLOW
CAUDAL DE AIRE
AIR THROW
TIRADA DE AIRE
WEIGHT
PESO
DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 12 m2 m3/h m kg
EXA-27 kcal/h 20038 23220 28638 33970 121 11800 7 96
W 20600 23300 27000 33300 39500
EXA-28 kcal/h 20700 23994 29584 35260 145,3 11500 7 116
W 21200 24100 27900 34400 41000
EXA-41 kcal/h 30444 35260 43430 51772 181,6 17700 7 133
W 31200 35400 41000 50500 60200
EXA-43 kcal/h 31992 37066 45580 54352 218 17300 7 167
W 32800 37200 43100 53000 63200
EXA-55 kcal/h 40936 47472 58394 69730 242 23600 7 176
W 41800 47600 55200 67900 81080
EXA-57 kcal/h 42650 49364 60716 72515 291 23000 7 220
W 43600 49600 57400 70600 84320
R-404 A
MODEL
MODELO
CAPACITY
CAPACIDAD
ENV 328
COND. 1
Tev
= 0ºC SURFACE
SUPERFICIE
AIR FLOW
CAUDAL DE AIRE
AIR THROW
TIRADA DE AIRE
WEIGHT
PESO
DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 12 m2 m3/h m kg
EXA-27 kcal/h 17540 20296 25026 29884 121 9300 5 96
W 18000 20400 23600 29100 34520
EXA-28 kcal/h 18662 21672 26574 31733 145,3 9000 5 116
W 19000 21700 25200 30900 36600
EXA-41 kcal/h 26746 30960 38141 45540 181,6 13950 5 133
W 27400 31100 36000 44350 52600
EXA-43 kcal/h 28552 33110 40678 48570 218 13500 5 167
W 29200 33200 38500 47300 56480
EXA-55 kcal/h 35860 41540 51084 61000 242 18600 5 176
W 36600 41700 48800 59400 70930
EXA-57 kcal/h 37754 43688 53750 64180 291 18000 5 220
W 38600 43900 50800 62500 74630
Low Speed : 1000 rpm / Baja velocidad: 1000 r.p.m.
R-404 A
MODEL
MODELO
CAPACITY
CAPACIDAD
ENV 328
COND. 2
Tev
= -5ºC SURFACE
SUPERFICIE
AIR FLOW
CAUDAL DE AIRE
AIR THROW
TIRADA DE AIRE
WEIGHT
PESO
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXR-19 kcal/h 8714 13217 16140 21521 80,9 12100 7 92
W 13600 10132 15369 18768 25024
EXR-20 kcal/h 9226 13994 17090 22787 96,9 11800 7 112
W 14400 10728 16272 19872 26496
EXR-28 kcal/h 13198 20019 24448 32597 121,0 18150 7 128
W 20600 15347 23278 28428 37904
EXR-31 kcal/h 14224 21574 26347 35129 145,3 17700 7 162
W 22200 16539 25086 30636 40848
EXR-38 kcal/h 17555 26627 32518 41358 161,3 24200 7 170
W 27400 20413 30962 37812 50416
EXR-41 kcal/h 18837 28571 34892 46523 194,0 23600 7 214
W 29400 21903 33222 40572 54096
EXR series / Serie EXR Fin spacing / Paso de aletas: 4,5 mm
High Speed : 1350 rpm / Alta velocidad: 1350 r.p.m.
R-404 A
MODEL
MODELO
CAPACITY
CAPACIDAD
ENV 328
COND. 2
Tev
= -5ºC SURFACE
SUPERFICIE
AIR FLOW
CAUDAL DE AIRE
AIR THROW
TIRADA DE AIRE
WEIGHT
PESO
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXR-19 kcal/h 7688 11662 14242 18989 80,9 9600 5 92
W 12000 8940 13560 16560 22080
EXR-20 kcal/h 8329 12633 15428 20571 96,9 9300 5 112
W 13000 9685 14690 17940 23920
EXR-28 kcal/h 11661 17687 21600 28800 121,0 14400 5 128
W 18200 13559 20566 25116 33488
EXR-31 kcal/h 12942 19630 23973 31964 145,3 13950 5 162
W 20200 15049 22826 27876 37168
EXR-38 kcal/h 15633 23712 28958 38611 161,3 19200 5 170
W 24400 18178 27572 33672 44896
EXR-41 kcal/h 17043 25850 31569 42092 194,0 18600 5 214
W 26600 19817 30058 36708 48944
Low Speed : 1000 rpm / Baja velocidad: 1000 r.p.m.
R-404 A
MODEL
MODELO
CAPACITY
CAPACIDAD
ENV 328
COND. 3 Tev
=-5ºC Tev
= -25ºC
SURFACE
SUPERFICIE
AIR FLOW
CAUDAL DE AIRE
AIR THROW
TIRADA DE AIRE
WEIGHT
PESO
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXC-15 kcal/h 7183 11063 13591 18163 6522 9247 11558 16677 51,9 12200 7 88
W 9600 8352 12864 15803 21120 7584 10752 13440 19392
EXC-19 kcal/h 8529 13137 16157 21569 7745 10980 13726 19804 62,3 12000 7 108
W 11400 9918 15276 18787 25080 9006 12768 15960 23028
EXC-23 kcal/h 10624 16364 20126 26866 9647 13677 17097 24668 77,8 18300 7 123
W 14200 12354 19028 23402 21240 11218 15904 19800 28684
EXC-26 kcal/h 11971 18438 22676 30272 10870 15411 19264 27795 93,4 18000 7 157
W 16000 13920 21440 26368 35200 12640 17920 22400 32320
EXC-32 kcal/h 14964 23048 28346 37840 13588 19264 24080 34744 103,7 24400 7 164
W 20000 17400 26800 32960 44000 15800 22400 28000 40400
EXC-34 kcal/h 16983 25229 28913 40317 15623 21369 26282 37159 124,7 24000 7 208
W 22400 19748 29336 33620 46880 18166 24848 30560 43208
EXC series / Serie EXCFin spacing / Paso de aletas: 7 mm
High Speed : 1350 rpm / Alta velocidad: 1350 r.p.m.
Low Speed : 1000 rpm / Baja velocidad: 1000 r.p.m.
R-404 A
MODEL
MODELO
CAPACITY
CAPACIDAD
ENV 328
COND. 3 Tev
= -5ºC Tev
= -25ºC
SURFACE
SUPERFICIE
AIR FLOW
CAUDAL DE AIRE
AIR THROW
TIRADA DE AIRE
WEIGHT
PESO
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXC-15 kcal/h 6435 9911 12191 16271 5843 8284 10354 14940 51,9 9800 5 88
W 8600 7482 11524 14175 18920 6794 9632 12040 17372
EXC-19 kcal/h 7632 11754 14457 19298 6930 9825 12281 17719 62,3 9600 5 108
W 10200 8874 13668 16810 22440 8058 11424 14280 20604
EXC-23 kcal/h 9876 15212 18708 24974 8968 12714 15893 22931 77,8 14700 5 123
W 13200 11484 17688 21754 29040 10428 14784 18480 26664
EXC-26 kcal/h 11073 17056 20975 28002 10055 14255 17819 25711 93,4 14400 5 157
W 14800 12876 19832 24390 32560 11692 16576 20720 29896
EXC-32 kcal/h 13617 20974 25795 34434 12365 17530 21913 31617 103,7 19600 5 164
W 18200 15834 24388 29994 40040 14378 20384 25480 36764
EXC-34 kcal/h 15114 23278 28629 37874 13724 19457 24321 35091 124,7 23200 5 208
W 20200 17574 27068 33290 44040 15958 22624 28280 40804
Características técnicasTechnical Features /
400 V 400 V
MODEL
MODELO
FANS
VENTILADORES
POWER
POTENCIA
INTENSITY
INTENSIDAD
DIMENSIONS (mm)
DIMENSIONES (mm)
DRAINAGE
DRENAJE
INLET
ENTRADA
OUTLET
SALIDA
ELECTRIC HEATERS
RESISTENCIAS
N Ø (mm) Δ Y Δ Y A B C Ø Ø Ø W TOT
A TOT
EXA-27 EXR-19 EXC-15 2 450 1200 1020 2,4 1,76 1560 680 650 2 X 1 1/4” 7/8” 1 5/8” 9696 14,24
EXA-28 EXR-20 EXC-19 2 450 1200 1020 2,4 1,76 1560 680 650 2 X 1 1/4” 7/8” 1 5/8” 9696 14,24
EXA-41 EXR-28 EXC-23 3 450 1920 1530 3,6 2,64 2210 680 650 2 X 1 1/4” 1 1/8” 1 5/8” 14120 20,74
EXA-43 EXR-31 EXC-26 3 450 1920 1530 3,6 2,64 2210 680 650 2 X 1 1/4” 1 1/8” 1 5/8” 14120 20,74
EXA-55 EXR-38 EXC-32 4 450 2560 2040 4,8 3,52 2860 680 650 2 X 1 1/4” 1 1/8” 2 1/8” 18296 27,00
EXA-57 EXR-41 EXC-34 4 450 2560 2040 4,8 3,52 2860 680 60 2 X 1 1/4” 1 1/8” 2 1/8” 18296 27,00
100650650650680150
A
610
ØAS
P.
ØLI
QU.
ØLÍ
Q.
Ø1
1/4"
Ø1
1/4"
2525
1290
1340
1260
800
EXA-41-L
EXA-28-L EXA-27-L
EXA-55-L
EXA-43-L
-15
DT=10°C
DT=8 °C
DT=9 °C
DT=7 °C
-30
-20
-25
DT=5 °C
DT=6 °C
10
°C15
-10
-5
0
5
-35
EXA-57-LEXA-55
EXA-43 EXA-41
EXA-28 EXA-27
EXA-57
EXA
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
EXR-31-LEXR-28-L
EXR-19-LEXR-20-L
EXR-41-LEXR-38-L
-15
-30
-20
-25
10
°C15
-10
-5
0
5
-35
DT=10 °C
DT=8 °C
DT=9 °C
DT=7 °C
DT=5 °C
DT=6 °C
EXR-31
EXR-19EXR-20
EXR-28
EXR-38EXR-41
EXR
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
EXC-19-LEXC-15-L
EXC-34-L
EXC-26-LEXC-23-L
EXC-32-LEXC-32EXC-34
EXC-26EXC-23
EXC-15
EXC-19
DT=10 °C
DT=7 °C
DT=9 °C
DT=8 °C
DT=6 °C
DT=5 °C
-15
-35
-25
-30
-20
-10
5
0
-5
10
15°C
EXC en Tev
: - 5°C
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
DT=10 °C
DT=7 °C
DT=9 °C
DT=8 °C
DT=6 °C
DT=5 °C
-15
-35
-25
-30
-20
-10
5
0
-5
10
15°C
EXC-34
EXC-26
EXC-19EXC-15
EXC-23
EXC-32
EXC-15-LEXC-19-L
EXC-23-LEXC-26-L
EXC-34-LEXC-32-L
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
EXC en Tev
: - 25°C
Ejemplos:
Potencia necesaria: Q = 30000 W
Temperatura de la cámara: Tr = +2°C
Temperatura de evaporación: Tev = -6°C
Refrigerante: R-404A
Selección: EXR-38/EXR-41 a baja velocidad
Gráfi co de selección avanzadaSeleccione el DT adecuado para obtener la humedad
relativa (H.R.) elegida en la cámara frigorífi ca.
Opciones:
Aletas de cobre•
Aletas de aluminio lacadas•
Ventiladores especiales•
Descarche eléctrico (serie EXR)•
Descarche por gas caliente•
Agua glicolada como refrigerante•
95
90
85
80
75
70
H.R. (%)
DT (K)5 6 7 8 9 10
Examples:
Capacity required: Q = 30000 W
Room Temperature: Tcf = +2°C
Evaporation Temperature: Tev = -6°C
Refrigerant: R-404 A
Selection: EXR-38 / EXR 41 Low Speed
Advanced selection chartSelect appropriate TD to achieve chosen R.H.
(Relative Humidity) in the cold room.
Options:
Copper fi ns•
Hydrophilic or Hydrophobic aluminium coated fi ns•
Special fans•
Electric defrost (EXR series)•
Hot gas defrost•
Brine as Refrigerant•
© 2009 Ingersoll-Rand Company Limited KB 006-2 EN-ES (06-2009)
Kobol Industrial Dual Discharge Unit Coolers - EXA, EXR & EXC Series
Cooling capacities The duties shown in the table are at ENV328 standard
condition 1 (0ºC saturated suction temperature, +10ºC
air entering) for the EXA , Condition 2 (-8ºC saturated
suction temperature, 0ºC air entering) for the EXR series
and condition 3 (-25ºC saturated suction temperature,
-18ºC air entering) for the EXC series. (Dry fin surface
conditions for both cases)
Unit selection EXA, EXR and EXC series:Capacities are shown for R-404 A refrigerant•
TD is the difference between the entering air •
temperature and the saturation suction temperature
at the cooler outlet
T• ev: saturated suction temperature at cooler outlet
Two fan speed available•
Multiply shown capacity by appropriate factor to give •
performance with chosen refrigerant
EXA EXR EXC
R-134a 0,93 0,91 0,85
R-22 0,95 0,95 0,95
IMPORTANT NOTE: Decimals are used in the following format: x,xx (example 5,23) Thousands are used in the following format: xxxx (example 1264)
Industrielle Doppelausströmgerätekühler von Kobol – EXA-, EXR- und EXC-Serien
Kühlleistungen Der in der Tabelle gezeigte Betrieb findet für die EXA-Serie
bei ENV328-Standardbedingung 1 (0 °C gesättigte
Temperatur, +10 °C Einlasstemperatur), für die EXR-Serie
bei Bedingung 2 (-8 °C gesättigte Temperatur, 0 °C
Einlasstemperatur) und für die EXC-Serie bei Bedingung 3
(-25 °C gesättigte Temperatur, -18 °C Einlasstemperatur)
statt (trockene Kühlrippen für beide Temperaturen).
Geräteauswahl für EXA-, EXR- und EXC-Serien:Die dargestellten Leistungen werden mit dem •
Kältemittel R-404 A erzielt.
TD ist der Unterschied zwischen der Temperatur der •
eingelassenen Luft und der Sättigungstemperatur am
Luftauslass des Gerätekühlers.
T• ev: gesättigte Temperatur am Luftauslass des
Gerätekühlers.
Zweistufiges Gebläse erhältlich.•
Multiplizieren Sie die angegebene Leistung mit den •
zutreffenden Faktoren, um die tatsächliche Leistung
mit dem gewählten Kühlmittel zu bestimmen.
EXA series /Fin spacing /
High Speed : 1350 rpm /
R-404 A
MODEL CAPACITY ENV 328
COND. 1
Tev
= 0ºC SURFACE AIR FLOw AIR THROw wEIGHT
DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 12 m2 m3/h m kg
EXA-27 kcal/h 20038 23220 28638 33970 121 11800 7 96
w 20600 23300 27000 33300 39500
EXA-28 kcal/h 20700 23994 29584 35260 145,3 11500 7 116
w 21200 24100 27900 34400 41000
EXA-41 kcal/h 30444 35260 43430 51772 181,6 17700 7 133
w 31200 35400 41000 50500 60200
EXA-43 kcal/h 31992 37066 45580 54352 218 17300 7 167
w 32800 37200 43100 53000 63200
EXA-55 kcal/h 40936 47472 58394 69730 242 23600 7 176
w 41800 47600 55200 67900 81080
EXA-57 kcal/h 42650 49364 60716 72515 291 23000 7 220
w 43600 49600 57400 70600 84320
R-404 A
MODEL CAPACITY ENV 328
COND. 1
Tev
= 0ºC SURFACE AIR FLOw AIR THROw wEIGHT
DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 12 m2 m3/h m kg
EXA-27 kcal/h 17540 20296 25026 29884 121 9300 5 96
w 18000 20400 23600 29100 34520
EXA-28 kcal/h 18662 21672 26574 31733 145,3 9000 5 116
w 19000 21700 25200 30900 36600
EXA-41 kcal/h 26746 30960 38141 45540 181,6 13950 5 133
w 27400 31100 36000 44350 52600
EXA-43 kcal/h 28552 33110 40678 48570 218 13500 5 167
w 29200 33200 38500 47300 56480
EXA-55 kcal/h 35860 41540 51084 61000 242 18600 5 176
w 36600 41700 48800 59400 70930
EXA-57 kcal/h 37754 43688 53750 64180 291 18000 5 220
w 38600 43900 50800 62500 74630
Low Speed : 1000 rpm /
EXA-SerieLamellenabstand
Schnelllauf: 1.350 U/min
MODELL LEIStUng FLäChE LUFtzIRKULAtIOn LUFtDURChSAtz gEwICht
MODELL LEIStUng FLäChE LUFtzIRKULAtIOn LUFtDURChSAtz gEwICht
1.000 U/min
R-404 A
MODEL CAPACITY ENV 328
COND. 2
Tev
= -5ºC SURFACE AIR FLOw AIR THROw wEIGHT
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXR-19 kcal/h 8714 13217 16140 21521 80,9 12100 7 92
w 13600 10132 15369 18768 25024
EXR-20 kcal/h 9226 13994 17090 22787 96,9 11800 7 112
w 14400 10728 16272 19872 26496
EXR-28 kcal/h 13198 20019 24448 32597 121,0 18150 7 128
w 20600 15347 23278 28428 37904
EXR-31 kcal/h 14224 21574 26347 35129 145,3 17700 7 162
w 22200 16539 25086 30636 40848
EXR-38 kcal/h 17555 26627 32518 41358 161,3 24200 7 170
w 27400 20413 30962 37812 50416
EXR-41 kcal/h 18837 28571 34892 46523 194,0 23600 7 214
w 29400 21903 33222 40572 54096
EXR series / Fin spacing /
High Speed : 1350 rpm /
R-404 A
MODEL CAPACITY ENV 328
COND. 2
Tev
= -5ºC SURFACE AIR FLOw AIR THROw wEIGHT
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXR-19 kcal/h 7688 11662 14242 18989 80,9 9600 5 92
w 12000 8940 13560 16560 22080
EXR-20 kcal/h 8329 12633 15428 20571 96,9 9300 5 112
w 13000 9685 14690 17940 23920
EXR-28 kcal/h 11661 17687 21600 28800 121,0 14400 5 128
w 18200 13559 20566 25116 33488
EXR-31 kcal/h 12942 19630 23973 31964 145,3 13950 5 162
w 20200 15049 22826 27876 37168
EXR-38 kcal/h 15633 23712 28958 38611 161,3 19200 5 170
w 24400 18178 27572 33672 44896
EXR-41 kcal/h 17043 25850 31569 42092 194,0 18600 5 214
w 26600 19817 30058 36708 48944
Low Speed : 1000 rpm /
MODELL LEIStUng FLäChE LUFtzIRKULAtIOn LUFtDURChSAtz gEwICht
EXR-SerieLamellenabstand
Schnelllauf: 1.350 U/min
MODELL LEIStUng FLäChE LUFtzIRKULAtIOn LUFtDURChSAtz gEwICht
Langsamlauf: 1.000 U/min
R-404 A
MODEL CAPACITY ENV 328
COND. 3 Tev
=-5ºC Tev
= -25ºC
SURFACE AIR FLOw AIR THROw wEIGHT
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXC-15 kcal/h 7183 11063 13591 18163 6522 9247 11558 16677 51,9 12200 7 88
w 9600 8352 12864 15803 21120 7584 10752 13440 19392
EXC-19 kcal/h 8529 13137 16157 21569 7745 10980 13726 19804 62,3 12000 7 108
w 11400 9918 15276 18787 25080 9006 12768 15960 23028
EXC-23 kcal/h 10624 16364 20126 26866 9647 13677 17097 24668 77,8 18300 7 123
w 14200 12354 19028 23402 21240 11218 15904 19800 28684
EXC-26 kcal/h 11971 18438 22676 30272 10870 15411 19264 27795 93,4 18000 7 157
w 16000 13920 21440 26368 35200 12640 17920 22400 32320
EXC-32 kcal/h 14964 23048 28346 37840 13588 19264 24080 34744 103,7 24400 7 164
w 20000 17400 26800 32960 44000 15800 22400 28000 40400
EXC-34 kcal/h 16983 25229 28913 40317 15623 21369 26282 37159 124,7 24000 7 208
w 22400 19748 29336 33620 46880 18166 24848 30560 43208
EXC series /Fin spacing /
High Speed : 1350 rpm /
Low Speed : 1000 rpm /
R-404 A
MODEL CAPACITY ENV 328
COND. 3 Tev
= -5ºC Tev
= -25ºC
SURFACE AIR FLOw AIR THROw wEIGHT
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXC-15 kcal/h 6435 9911 12191 16271 5843 8284 10354 14940 51,9 9800 5 88
w 8600 7482 11524 14175 18920 6794 9632 12040 17372
EXC-19 kcal/h 7632 11754 14457 19298 6930 9825 12281 17719 62,3 9600 5 108
w 10200 8874 13668 16810 22440 8058 11424 14280 20604
EXC-23 kcal/h 9876 15212 18708 24974 8968 12714 15893 22931 77,8 14700 5 123
w 13200 11484 17688 21754 29040 10428 14784 18480 26664
EXC-26 kcal/h 11073 17056 20975 28002 10055 14255 17819 25711 93,4 14400 5 157
w 14800 12876 19832 24390 32560 11692 16576 20720 29896
EXC-32 kcal/h 13617 20974 25795 34434 12365 17530 21913 31617 103,7 19600 5 164
w 18200 15834 24388 29994 40040 14378 20384 25480 36764
EXC-34 kcal/h 15114 23278 28629 37874 13724 19457 24321 35091 124,7 23200 5 208
w 20200 17574 27068 33290 44040 15958 22624 28280 40804
EXC-SerieLamellenabstand
Lamellenabstand
MODELL LEIStUng FLäChE LUFt-zIRKULAtIOn
LUFt-DURChSAtz
gEwICht
MODELL LEIStUng FLäChE LUFt-zIRKULAtIOn
LUFt-DURChSAtz
gEwICht
Langsamlauf: 1.000 U/min
Technical Features /
400 V 400 V
MODEL FANS POwER INTENSITY DIMENSIONS (mm) DRAINAGE INLET OUTLET ELECTRIC HEATERS
N Ø (mm) ∆ Y ∆ Y A B C Ø Ø Ø w TOT
A TOT
EXA-27 EXR-19 EXC-15 2 450 1200 1020 2,4 1,76 1560 680 650 2 X 1 1/4” 7/8” 1 5/8” 9696 14,24
EXA-28 EXR-20 EXC-19 2 450 1200 1020 2,4 1,76 1560 680 650 2 X 1 1/4” 7/8” 1 5/8” 9696 14,24
EXA-41 EXR-28 EXC-23 3 450 1920 1530 3,6 2,64 2210 680 650 2 X 1 1/4” 1 1/8” 1 5/8” 14120 20,74
EXA-43 EXR-31 EXC-26 3 450 1920 1530 3,6 2,64 2210 680 650 2 X 1 1/4” 1 1/8” 1 5/8” 14120 20,74
EXA-55 EXR-38 EXC-32 4 450 2560 2040 4,8 3,52 2860 680 650 2 X 1 1/4” 1 1/8” 2 1/8” 18296 27,00
EXA-57 EXR-41 EXC-34 4 450 2560 2040 4,8 3,52 2860 680 60 2 X 1 1/4” 1 1/8” 2 1/8” 18296 27,00
Technische Daten
MODELL AbMESSUngEn (MM)VEntILAtOREn wASSERAbLAUFLEIStUng EInLASSIntEnSItät AUSLASS ELEKtROhEIzUngEn
EXA
EXR
EXC en Tev
: - 5°C
EXC en Tev
: - 25°C
Examples:
Capacity required: Q = 30,000 w
Room Temperature: Tcf = +2°C
Evaporation Temperature: Tev = -6°C
Refrigerant: R-404 A
Selection: EXR-38 / EXR 41 Low Speed
Advanced selection chartSelect appropriate TD to achieve chosen R.H.
(Relative Humidity) in the cold room.
Options:
Copper fins•
Hydrophilic or Hydrophobic aluminium coated fins•
Special fans•
Electric defrost (EXR series)•
Hot gas defrost•
Brine as Refrigerant•
© 2009 Ingersoll-Rand Company Limited KB 006-2 EN-DE (04-2009)
Beispiele:
Erforderliche Leistung: Q = 30.000 w
Raumtemperatur: Tcf = +2 °C
Verdampfungstemperatur: Tev = -6 °C
Kältemittel: R-404 A
Auswahl: EXR-38 / EXR-41 mit niedriger Drehzahl
Erweiterte Auswahltabellewählen Sie den entsprechenden Temperaturunterschied
(TD), um im Kühlraum die gewünschte relative
Feuchtigkeit (R.H.) zu erreichen.
Optionen:
Kupferlamellen•
Hydrophile oder hydrophobe Lamellen mit •
Aluminiumbeschichtung
Spezialgebläse•
Elektrischer Defrostbetrieb (EXR-Serie)•
Heißgasdefrost•
Sole als Kältemittel•
R.H. (%)
DT (K)
IMPORTANT NOTE: Decimals are used in the following format: x,xx (example 5,23) Thousands are used in the following format: xxxx (example 1264)
Kobol Industrial Dual Discharge Unit Coolers - EXA, EXR & EXC SeriesÉvaporateurs industriels à double flux Kobol - Séries EXA, EXR et EXC
Cooling capacities The duties shown in the table are at ENV328 standard
condition 1 (0ºC saturated suction temperature, +10ºC
air entering) for the EXA , Condition 2 (-8ºC saturated
suction temperature, 0ºC air entering) for the EXR series
and condition 3 (-25ºC saturated suction temperature,
-18ºC air entering) for the EXC series. (Dry fi n surface
conditions for both cases)
Puissance frigorifi que du systèmeLes puissances indiquées dans le tableau sont conformes
à la norme ENV328, condition 1 (température d’aspiration
saturée 0 ºC, entrée d’air +10 ºC) pour la série EXA,
condition 2 (température d’aspiration saturée -8 ºC,
entrée d’air 0 ºC) pour la série EXR et condition 3
(température d’aspiration saturée -25 ºC, entrée d’air
-18 ºC) pour la série EXC. (La surface des ailettes est
sèche dans les deux cas.)
Unit selection EXA, EXR and EXC series:Capacities are shown for R-404 A refrigerant•
TD is the difference between the entering air •
temperature and the saturation suction temperature
at the cooler outlet
T• ev: saturated suction temperature at cooler outlet
Two fan speed available•
Multiply shown capacity by appropriate factor to give •
performance with chosen refrigerant
Sélection de groupes Séries EXA, EXR et EXC :Les puissances sont indiquées pour le réfrigérant R-404 A•
TD correspond à la différence entre la température •
de l’air entrant et la température d’aspiration saturée
en sortie du groupe frigorifi que
T• ev correspond à la température d’aspiration saturée
en sortie du groupe frigorifi que
Multipliez la puissance indiquée par le facteur •
approprié pour obtenir les performances avec
le réfrigérant choisi.
EXA EXR EXC
R-134a 0,93 0,91 0,85
R-22 0,95 0,95 0,95
EXA series / Série EXAFin spacing / Pas d’ailettes : 3 mm
High Speed: 1 350 rpm / Haute Vitesse : 1350 t/min
R-404 A
MODEL
MODÈLE
CAPACITY
PUISSANCE
ENV 328
COND. 1
Tev
= 0ºC SURFACE
SURFACE
AIR FLOW
DÉBIT D’AIR
AIR THROW
PROJECTION
D’AIR
WEIGHT
POIDS
DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 12 m2 m3/h m kg
EXA-27 kcal/h 20038 23220 28638 33970 121 11800 7 96
W 20600 23300 27000 33300 39500
EXA-28 kcal/h 20700 23994 29584 35260 145,3 11500 7 116
W 21200 24100 27900 34400 41000
EXA-41 kcal/h 30444 35260 43430 51772 181,6 17700 7 133
W 31200 35400 41000 50500 60200
EXA-43 kcal/h 31992 37066 45580 54352 218 17300 7 167
W 32800 37200 43100 53000 63200
EXA-55 kcal/h 40936 47472 58394 69730 242 23600 7 176
W 41800 47600 55200 67900 81080
EXA-57 kcal/h 42650 49364 60716 72515 291 23000 7 220
W 43600 49600 57400 70600 84320
R-404 A
MODEL
MODÈLE
CAPACITY
PUISSANCE
ENV 328
COND. 1
Tev
= 0ºC SURFACE
SURFACE
AIR FLOW
DÉBIT D’AIR
AIR THROW
PROJECTION
D’AIR
WEIGHT
POIDS
DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 12 m2 m3/h m kg
EXA-27 kcal/h 17540 20296 25026 29884 121 9300 5 96
W 18000 20400 23600 29100 34520
EXA-28 kcal/h 18662 21672 26574 31733 145,3 9000 5 116
W 19000 21700 25200 30900 36600
EXA-41 kcal/h 26746 30960 38141 45540 181,6 13950 5 133
W 27400 31100 36000 44350 52600
EXA-43 kcal/h 28552 33110 40678 48570 218 13500 5 167
W 29200 33200 38500 47300 56480
EXA-55 kcal/h 35860 41540 51084 61000 242 18600 5 176
W 36600 41700 48800 59400 70930
EXA-57 kcal/h 37754 43688 53750 64180 291 18000 5 220
W 38600 43900 50800 62500 74630
Low Speed: 1000 rpm / Faible Vitesse : 1000 t/min
R-404 A
MODEL
MODÈLE
CAPACITY
PUISSANCE
ENV 328
COND. 2
Tev
= -5ºC SURFACE
SURFACE
AIR FLOW
DÉBIT D’AIR
AIR THROW
PROJECTION
D’AIR
WEIGHT
POIDS
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXR-19 kcal/h 8714 13217 16140 21521 80,9 12100 7 92
W 13600 10132 15369 18768 25024
EXR-20 kcal/h 9226 13994 17090 22787 96,9 11800 7 112
W 14400 10728 16272 19872 26496
EXR-28 kcal/h 13198 20019 24448 32597 121,0 18150 7 128
W 20600 15347 23278 28428 37904
EXR-31 kcal/h 14224 21574 26347 35129 145,3 17700 7 162
W 22200 16539 25086 30636 40848
EXR-38 kcal/h 17555 26627 32518 41358 161,3 24200 7 170
W 27400 20413 30962 37812 50416
EXR-41 kcal/h 18837 28571 34892 46523 194,0 23600 7 214
W 29400 21903 33222 40572 54096
EXR series / Série EXRFin spacing / Pas d’ailettes : 4,5 mm
High Speed: 1350 rpm / Haute Vitesse : 1350 t/min
R-404 A
MODEL
MODÈLE
CAPACITY
PUISSANCE
ENV 328
COND. 2
Tev
= -5ºC SURFACE
SURFACE
AIR FLOW
DÉBIT D’AIR
AIR THROW
PROJECTION
D’AIR
WEIGHT
POIDS
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXR-19 kcal/h 7688 11662 14242 18989 80,9 9600 5 92
W 12000 8940 13560 16560 22080
EXR-20 kcal/h 8329 12633 15428 20571 96,9 9300 5 112
W 13000 9685 14690 17940 23920
EXR-28 kcal/h 11661 17687 21600 28800 121,0 14400 5 128
W 18200 13559 20566 25116 33488
EXR-31 kcal/h 12942 19630 23973 31964 145,3 13950 5 162
W 20200 15049 22826 27876 37168
EXR-38 kcal/h 15633 23712 28958 38611 161,3 19200 5 170
W 24400 18178 27572 33672 44896
EXR-41 kcal/h 17043 25850 31569 42092 194,0 18600 5 214
W 26600 19817 30058 36708 48944
Low Speed: 1000 rpm / Faible Vitesse : 1000 t/min
R-404 A
MODEL
MODÈLE
CAPACITY
PUISSANCE
ENV 328
COND. 3 Tev
=-5ºC Tev
= -25ºC
SURFACE
SURFACE
AIR FLOW
DÉBIT
D’AIR
AIR THROW
PROJECTION
D’AIR
WEIGHT
POIDS
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXC-15 kcal/h 7183 11063 13591 18163 6522 9247 11558 16677 51,9 12200 7 88
W 9600 8352 12864 15803 21120 7584 10752 13440 19392
EXC-19 kcal/h 8529 13137 16157 21569 7745 10980 13726 19804 62,3 12000 7 108
W 11400 9918 15276 18787 25080 9006 12768 15960 23028
EXC-23 kcal/h 10624 16364 20126 26866 9647 13677 17097 24668 77,8 18300 7 123
W 14200 12354 19028 23402 21240 11218 15904 19800 28684
EXC-26 kcal/h 11971 18438 22676 30272 10870 15411 19264 27795 93,4 18000 7 157
W 16000 13920 21440 26368 35200 12640 17920 22400 32320
EXC-32 kcal/h 14964 23048 28346 37840 13588 19264 24080 34744 103,7 24400 7 164
W 20000 17400 26800 32960 44000 15800 22400 28000 40400
EXC-34 kcal/h 16983 25229 28913 40317 15623 21369 26282 37159 124,7 24000 7 208
W 22400 19748 29336 33620 46880 18166 24848 30560 43208
EXC series / Série EXCFin spacing / Pas d’ailettes : 7 mm
High Speed: 1350 rpm / Haute Vitesse : 1350 t/min
Low Speed: 1000 / Faible Vitesse : 1000 t/min
R-404 A
MODEL
MODÈLE
CAPACITY
PUISSANCE
ENV 328
COND. 3 Tev
= -5ºC Tev
= -25ºC
SURFACE
SURFACE
AIR FLOW
DÉBIT
D’AIR
AIR THROW
PROJECTION
D’AIR
WEIGHT
POIDS
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXC-15 kcal/h 6435 9911 12191 16271 5843 8284 10354 14940 51,9 9800 5 88
W 8600 7482 11524 14175 18920 6794 9632 12040 17372
EXC-19 kcal/h 7632 11754 14457 19298 6930 9825 12281 17719 62,3 9600 5 108
W 10200 8874 13668 16810 22440 8058 11424 14280 20604
EXC-23 kcal/h 9876 15212 18708 24974 8968 12714 15893 22931 77,8 14700 5 123
W 13200 11484 17688 21754 29040 10428 14784 18480 26664
EXC-26 kcal/h 11073 17056 20975 28002 10055 14255 17819 25711 93,4 14400 5 157
W 14800 12876 19832 24390 32560 11692 16576 20720 29896
EXC-32 kcal/h 13617 20974 25795 34434 12365 17530 21913 31617 103,7 19600 5 164
W 18200 15834 24388 29994 40040 14378 20384 25480 36764
EXC-34 kcal/h 15114 23278 28629 37874 13724 19457 24321 35091 124,7 23200 5 208
W 20200 17574 27068 33290 44040 15958 22624 28280 40804
Technical Features / Caractéristiques techniques
400 V 400 V
MODEL
MODÈLE
FANS
VENTILATEURS
POWER
PUISSANCE
INTENSITY
INTENSITÉ
DIMENSIONS (mm)
DIMENSIONS (mm)
DRAINAGE
VIDANGE
INLET
ENTRÉE
OUTLET
SORTIE
ELECTRIC HEATERS
RÉSISTANCES ÉLECTRIQUES
N Ø (mm) Δ Y Δ Y A B C Ø Ø Ø W TOT
A TOT
EXA-27 EXR-19 EXC-15 2 450 1200 1020 2,4 1,76 1560 680 650 2 X 1 1/4” 7/8” 1 5/8” 9696 14,24
EXA-28 EXR-20 EXC-19 2 450 1200 1020 2,4 1,76 1560 680 650 2 X 1 1/4” 7/8” 1 5/8” 9696 14,24
EXA-41 EXR-28 EXC-23 3 450 1920 1530 3,6 2,64 2210 680 650 2 X 1 1/4” 1 1/8” 1 5/8” 14120 20,74
EXA-43 EXR-31 EXC-26 3 450 1920 1530 3,6 2,64 2210 680 650 2 X 1 1/4” 1 1/8” 1 5/8” 14120 20,74
EXA-55 EXR-38 EXC-32 4 450 2560 2040 4,8 3,52 2860 680 650 2 X 1 1/4” 1 1/8” 2 1/8” 18296 27,00
EXA-57 EXR-41 EXC-34 4 450 2560 2040 4,8 3,52 2860 680 60 2 X 1 1/4” 1 1/8” 2 1/8” 18296 27,00
100650650650680150
A
610
ØAS
P.
ØLI
QU.
Ø1
1/4"
Ø1
1/4"
2525
1290
1340
1260
800
EXA
EXR
EXA-41-L
EXA-28-L EXA-27-L
EXA-55-L
EXA-43-L
-15
DT=10°C
DT=8 °C
DT=9 °C
DT=7 °C
-30
-20
-25
DT=5 °C
DT=6 °C
10
°C15
-10
-5
0
5
-35
EXA-57-LEXA-55
EXA-43 EXA-41
EXA-28 EXA-27
EXA-57
EXR-31-LEXR-28-L
EXR-19-LEXR-20-L
EXR-41-LEXR-38-L
-15
-30
-20
-25
10
°C15
-10
-5
0
5
-35
DT=10 °C
DT=8 °C
DT=9 °C
DT=7 °C
DT=5 °C
DT=6 °C
EXR-31
EXR-19EXR-20
EXR-28
EXR-38EXR-41
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
EXC à Tev
: - 5°C
EXC à Tev
: - 25°C
EXC-19-LEXC-15-L
EXC-34-L
EXC-26-LEXC-23-L
EXC-32-LEXC-32EXC-34
EXC-26EXC-23
EXC-15
EXC-19
DT=10 °C
DT=7 °C
DT=9 °C
DT=8 °C
DT=6 °C
DT=5 °C
-15
-35
-25
-30
-20
-10
5
0
-5
10
15°C
DT=10 °C
DT=7 °C
DT=9 °C
DT=8 °C
DT=6 °C
DT=5 °C
-15
-35
-25
-30
-20
-10
5
0
-5
10
15°C
EXC-34
EXC-26
EXC-19EXC-15
EXC-23
EXC-32
EXC-15-LEXC-19-L
EXC-23-LEXC-26-L
EXC-34-LEXC-32-L
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
95
90
85
80
75
70
H.R. (%)
DT (K)5 6 7 8 9 10
Examples:
Capacity required: Q = 30000 W
Room Temperature: Tcf = +2°C
Evaporation Temperature: Tev = -6°C
Refrigerant: R-404 A
Selection: EXR-38 / EXR 41 Low Speed
Exemples :
Puissance requise : Q = 30000 W
Température ambiante : Tcf = +2°C
Température d’évaporation : Tev = -6°C
Réfrigérant : R-404 A
Sélection : EXR-38 / EXR 41 Petite vitesse
Advanced selection chartSelect appropriate TD to achieve chosen R.H.
(Relative Humidity) in the cold room.
Graphique de sélection Sélectionnez la différence TD appropriée pour
atteindre le taux d’humidité relative (HR) choisi dans
la chambre froide.
Options:
Copper fi ns•
Hydrophilic or Hydrophobic aluminium coated fi ns•
Special fans•
Electric defrost (EXR series)•
Hot gas defrost•
Brine as Refrigerant•
Options :
Ailettes en cuivre•
Ailettes en aluminium traité hydrophile •
ou hydrophobe
Ventilateurs spéciaux•
Dégivrage électrique (Série EXR)•
Dégivrage par gaz chauds•
Application pour saumure•
© 2009 Ingersoll-Rand Company Limited KB 006-2 EN-FR (06-2009)
Chłodnice o podwójnym wydmuchu firmy Kobol Industrial -serie EXA, EXR & EXC
Wydajność chłodnicza Podane w tabeli wartości wydajności nominalnej
są zgodne z warunkiem nr 1 normy EN328
(temperatura nasyconego czynnika chłodniczego
w przewodzie ssawnym: 0ºC, temperatura powietrza
wlotowego: +10ºC) dla serii EXA, warunkiem nr 2
(temperatura nasyconego czynnika chłodniczego
w przewodzie ssawnym: -8ºC, temperatura powietrza
wlotowego: 0ºC) dla serii EXR i warunku nr 3
(temperatura nasyconego czynnika chłodniczego
w przewodzie ssawnym: -25ºC, temperatura powietrza
wlotowego: -18ºC) dla serii EXC. (W obu przypadkach
zakładany jest warunek suchej powierzchni lameli).
Wybór urządzenia serii EXA, EXR i EXC:Podane wartości wydajności chłodniczej dotyczą •
czynnika chłodniczego R-404A.
TD jest różnicą temperatury powietrza wlotowego •
i temperatury nasycenia czynnika chłodniczego
w przewodzie ssawnym na wylocie z chłodnicy.
T• ev : temperatura nasyconego czynnika
chłodniczego w przewodzie ssawnym na wylocie
z chłodnicy.
Dostępne dwie prędkości wentylatora.•
Aby uzyskać wydajność dla wybranego czynnika •
chłodniczego, należy pomnożyć podaną wydajność
przez odpowiedni współczynnik.
Kobol Industrial Dual Discharge Unit Coolers - EXA, EXR & EXC Series
Cooling capacities The duties shown in the table are at ENV328 standard
condition 1 (0ºC saturated suction temperature, +10ºC
air entering) for the EXA , Condition 2 (-8ºC saturated
suction temperature, 0ºC air entering) for the EXR series
and condition 3 (-25ºC saturated suction temperature,
-18ºC air entering) for the EXC series. (Dry fi n surface
conditions for both cases)
Unit selection EXA, EXR and EXC series:Capacities are shown for R-404 A refrigerant•
TD is the difference between the entering air •
temperature and the saturation suction temperature
at the cooler outlet
T• ev : saturated suction temperature at cooler outlet
Two fan speed available•
Multiply shown capacity by appropriate factor to give •
performance with chosen refrigerant
EXA EXR EXC
R-134a 0,93 0,91 0,85
R-22 0,95 0,95 0,95
IMPORTANT NOTE: Decimals are used in the following format: x,xx (example 5,23) Thousands are used in the following format: xxxx (example 1264)
EXA series / Seria EXAFin spacing / Odstęp między lamelami: 3 mm
High Speed : 1350 rpm / Wysokie obroty: 1350 obr./min
R-404 A
MODEL
MODEL
CAPACITY
WYDAJNOŚĆ
ENV 328
COND. 1
Tev
= 0ºC SURFACE
POWIERZCH-NIA
AIR FLOW
PRZEPŁYW POWIETRZA
AIR THROW
ZASIĘG STRUMIENIA POWIETRZA
WEIGHT
MASA
DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 12 m2 m3/h m kg
EXA-27 kcal/h 20038 23220 28638 33970 121 11800 7 96
W 20600 23300 27000 33300 39500
EXA-28 kcal/h 20700 23994 29584 35260 145,3 11500 7 116
W 21200 24100 27900 34400 41000
EXA-41 kcal/h 30444 35260 43430 51772 181,6 17700 7 133
W 31200 35400 41000 50500 60200
EXA-43 kcal/h 31992 37066 45580 54352 218 17300 7 167
W 32800 37200 43100 53000 63200
EXA-55 kcal/h 40936 47472 58394 69730 242 23600 7 176
W 41800 47600 55200 67900 81080
EXA-57 kcal/h 42650 49364 60716 72515 291 23000 7 220
W 43600 49600 57400 70600 84320
R-404 A
MODEL
MODEL
CAPACITY
WYDAJNOŚĆ
ENV 328
COND. 1
Tev
= 0ºC SURFACE
POWIERZCH-NIA
AIR FLOW
PRZEPŁYW POWIETRZA
AIR THROW
ZASIĘG STRUMIENIA POWIETRZA
WEIGHT
MASA
DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 12 m2 m3/h m kg
EXA-27 kcal/h 17540 20296 25026 29884 121 9300 5 96
W 18000 20400 23600 29100 34520
EXA-28 kcal/h 18662 21672 26574 31733 145,3 9000 5 116
W 19000 21700 25200 30900 36600
EXA-41 kcal/h 26746 30960 38141 45540 181,6 13950 5 133
W 27400 31100 36000 44350 52600
EXA-43 kcal/h 28552 33110 40678 48570 218 13500 5 167
W 29200 33200 38500 47300 56480
EXA-55 kcal/h 35860 41540 51084 61000 242 18600 5 176
W 36600 41700 48800 59400 70930
EXA-57 kcal/h 37754 43688 53750 64180 291 18000 5 220
W 38600 43900 50800 62500 74630
Low Speed : 1000 rpm / Niskie obroty: 1000 obr./min
R-404 A
MODEL
MODEL
CAPACITY
WYDAJNOŚĆ
ENV 328
COND. 2
Tev
= -5ºC SURFACE
POWIERZCH-NIA
AIR FLOW
PRZEPŁYW POWIETRZA
AIR THROW
ZASIĘG STRUMIENIA POWIETRZA
WEIGHT
MASA
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXR-19 kcal/h 8714 13217 16140 21521 80,9 12100 7 92
W 13600 10132 15369 18768 25024
EXR-20 kcal/h 9226 13994 17090 22787 96,9 11800 7 112
W 14400 10728 16272 19872 26496
EXR-28 kcal/h 13198 20019 24448 32597 121,0 18150 7 128
W 20600 15347 23278 28428 37904
EXR-31 kcal/h 14224 21574 26347 35129 145,3 17700 7 162
W 22200 16539 25086 30636 40848
EXR-38 kcal/h 17555 26627 32518 41358 161,3 24200 7 170
W 27400 20413 30962 37812 50416
EXR-41 kcal/h 18837 28571 34892 46523 194,0 23600 7 214
W 29400 21903 33222 40572 54096
EXR series / Seria EXRFin spacing / Odstęp między lamelami: 4,5 mm
High Speed : 1350 rpm / Wysokie obroty: 1350 obr./min
R-404 A
MODEL
MODEL
CAPACITY
WYDAJNOŚĆ
ENV 328
COND. 2
Tev
= -5ºC SURFACE
POWIERZCH-NIA
AIR FLOW
PRZEPŁYW POWIETRZA
AIR THROW
ZASIĘG STRUMIENIA POWIETRZA
WEIGHT
MASA
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXR-19 kcal/h 7688 11662 14242 18989 80,9 9600 5 92
W 12000 8940 13560 16560 22080
EXR-20 kcal/h 8329 12633 15428 20571 96,9 9300 5 112
W 13000 9685 14690 17940 23920
EXR-28 kcal/h 11661 17687 21600 28800 121,0 14400 5 128
W 18200 13559 20566 25116 33488
EXR-31 kcal/h 12942 19630 23973 31964 145,3 13950 5 162
W 20200 15049 22826 27876 37168
EXR-38 kcal/h 15633 23712 28958 38611 161,3 19200 5 170
W 24400 18178 27572 33672 44896
EXR-41 kcal/h 17043 25850 31569 42092 194,0 18600 5 214
W 26600 19817 30058 36708 48944
Low Speed : 1000 rpm / Niskie obroty: 1000 obr./min
R-404 A
MODEL
MODEL
CAPACITY
WYDAJNOŚĆ
ENV 328
COND. 3 Tev
=-5ºC Tev
= -25ºC
SURFACE
POWIERZCH-NIA
AIR FLOW
PRZEPŁYW POWIETRZA
AIR THROW
ZASIĘG STRUMIENIA POWIETRZA
WEIGHT
MASA
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXC-15 kcal/h 7183 11063 13591 18163 6522 9247 11558 16677 51,9 12200 7 88
W 9600 8352 12864 15803 21120 7584 10752 13440 19392
EXC-19 kcal/h 8529 13137 16157 21569 7745 10980 13726 19804 62,3 12000 7 108
W 11400 9918 15276 18787 25080 9006 12768 15960 23028
EXC-23 kcal/h 10624 16364 20126 26866 9647 13677 17097 24668 77,8 18300 7 123
W 14200 12354 19028 23402 21240 11218 15904 19800 28684
EXC-26 kcal/h 11971 18438 22676 30272 10870 15411 19264 27795 93,4 18000 7 157
W 16000 13920 21440 26368 35200 12640 17920 22400 32320
EXC-32 kcal/h 14964 23048 28346 37840 13588 19264 24080 34744 103,7 24400 7 164
W 20000 17400 26800 32960 44000 15800 22400 28000 40400
EXC-34 kcal/h 16983 25229 28913 40317 15623 21369 26282 37159 124,7 24000 7 208
W 22400 19748 29336 33620 46880 18166 24848 30560 43208
EXC series / Seria EXCFin spacing / Odstęp między lamelami: 7 mm
High Speed : 1350 rpm / Wysokie obroty: 1350 obr./min
Low Speed : 1000 rpm / Niskie obroty: 1000 obr./min
R-404 A
MODEL
MODEL
CAPACITY
WYDAJNOŚĆ
ENV 328
COND. 3 Tev
= -5ºC Tev
= -25ºC
SURFACE
POWIERZCH-NIA
AIR FLOW
PRZEPŁYW POWIETRZA
AIR THROW
ZASIĘG STRUMIENIA POWIETRZA
WEIGHT
MASA
DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 DT1 = 5 DT1 = 7 DT1 = 8 DT1 = 10 m2 m3/h m kg
EXC-15 kcal/h 6435 9911 12191 16271 5843 8284 10354 14940 51,9 9800 5 88
W 8600 7482 11524 14175 18920 6794 9632 12040 17372
EXC-19 kcal/h 7632 11754 14457 19298 6930 9825 12281 17719 62,3 9600 5 108
W 10200 8874 13668 16810 22440 8058 11424 14280 20604
EXC-23 kcal/h 9876 15212 18708 24974 8968 12714 15893 22931 77,8 14700 5 123
W 13200 11484 17688 21754 29040 10428 14784 18480 26664
EXC-26 kcal/h 11073 17056 20975 28002 10055 14255 17819 25711 93,4 14400 5 157
W 14800 12876 19832 24390 32560 11692 16576 20720 29896
EXC-32 kcal/h 13617 20974 25795 34434 12365 17530 21913 31617 103,7 19600 5 164
W 18200 15834 24388 29994 40040 14378 20384 25480 36764
EXC-34 kcal/h 15114 23278 28629 37874 13724 19457 24321 35091 124,7 23200 5 208
W 20200 17574 27068 33290 44040 15958 22624 28280 40804
Technical Features / Dane techniczne
400 V 400 V
MODEL
MODEL
FANS
WENTYLATORY
POWER
WYDAJNOŚĆ
INTENSITY
NATĘŻENIE
DIMENSIONS (mm)
WYMIARY (mm)
DRAINAGE
ODPŁYW SKROPLIN
INLET
WLOT
OUTLET
WYLOT
ELECTRIC HEATERS
GRZAŁKI ELEKTRYCZNE
N ∅ (mm) Δ Y Δ Y A B C ∅ ∅ ∅ W TOT
A TOT
EXA-27 EXR-19 EXC-15 2 450 1200 1020 2,4 1,76 1560 680 650 2 X 1 1/4” 7/8” 1 5/8” 9696 14,24
EXA-28 EXR-20 EXC-19 2 450 1200 1020 2,4 1,76 1560 680 650 2 X 1 1/4” 7/8” 1 5/8” 9696 14,24
EXA-41 EXR-28 EXC-23 3 450 1920 1530 3,6 2,64 2210 680 650 2 X 1 1/4” 1 1/8” 1 5/8” 14120 20,74
EXA-43 EXR-31 EXC-26 3 450 1920 1530 3,6 2,64 2210 680 650 2 X 1 1/4” 1 1/8” 1 5/8” 14120 20,74
EXA-55 EXR-38 EXC-32 4 450 2560 2040 4,8 3,52 2860 680 650 2 X 1 1/4” 1 1/8” 2 1/8” 18296 27,00
EXA-57 EXR-41 EXC-34 4 450 2560 2040 4,8 3,52 2860 680 60 2 X 1 1/4” 1 1/8” 2 1/8” 18296 27,00
100650650650680150
A
610
Ø p
rzew
odu
ssaw
nego
.
*
* Ø p
rzew
odu
odpr
owad
zając
ego
ciec
z
Ø1
1/4"
Ø1
1/4"
2525
1290
1340
1260
800
EXA
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
EXR
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
EXA-41-L
EXA-28-L EXA-27-L
EXA-55-L
EXA-43-L
-15
DT=10°C
DT=8 °C
DT=9 °C
DT=7 °C
-30
-20
-25
DT=5 °C
DT=6 °C
10
°C15
-10
-5
0
5
-35
EXA-57-LEXA-55
EXA-43 EXA-41
EXA-28 EXA-27
EXA-57
EXR-31-LEXR-28-L
EXR-19-LEXR-20-L
EXR-41-LEXR-38-L
-15
-30
-20
-25
10
°C15
-10
-5
0
5
-35
DT=10 °C
DT=8 °C
DT=9 °C
DT=7 °C
DT=5 °C
DT=6 °C
EXR-31
EXR-19EXR-20
EXR-28
EXR-38EXR-41
EXC przy Tev
: -5°C
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
4.000
5.0006.0007.000
10.0009.0008.000
5678910
30.000
20.000
40.000
60.00050.000
50
20
30
40
6070
70.000 80
Kcal/h KW
EXC przy Tev
: -25°C
EXC-19-LEXC-15-L
EXC-34-L
EXC-26-LEXC-23-L
EXC-32-LEXC-32EXC-34
EXC-26EXC-23
EXC-15
EXC-19
DT=10 °C
DT=7 °C
DT=9 °C
DT=8 °C
DT=6 °C
DT=5 °C
-15
-35
-25
-30
-20
-10
5
0
-5
10
15°C
DT=10 °C
DT=7 °C
DT=9 °C
DT=8 °C
DT=6 °C
DT=5 °C
-15
-35
-25
-30
-20
-10
5
0
-5
10
15°C
EXC-34
EXC-26
EXC-19EXC-15
EXC-23
EXC-32
EXC-15-LEXC-19-L
EXC-23-LEXC-26-L
EXC-34-LEXC-32-L
Przykłady:
Wymagana wydajność: Q = 30000 W
Temperatura w komorze chłodniczej: Tcf = +2°C
Temperatura parowania: Tev = -6°C
Czynnik chłodniczy: R-404A
Wybór: EXR-38 / EXR 41 Low Speed
Wykres zaawansowanego wyboruAby uzyskać wybraną wartość R.H. (wilgotności
względnej) w komorze chłodniczej, należy wybrać
odpowiednią wartość TD.
Opcje:
Lamele miedziane•
Lamele hydrofi lowe lub hydrofobowe w powłoce •
aluminiowej
Wentylatory specjalne•
Odszranianie elektryczne (seria EXR)•
Odszranianie gorącym gazem•
Solanka jako czynnik chłodniczy•
Examples:
Capacity required: Q = 30000 W
Room Temperature: Tcf = +2°C
Evaporation Temperature: Tev = -6°C
Refrigerant: R-404 A
Selection: EXR-38 / EXR 41 Low Speed
Advanced selection chartSelect appropriate TD to achieve chosen R.H.
(Relative Humidity) in the cold room.
Options:
Copper fi ns•
Hydrophilic or Hydrophobic aluminium coated fi ns•
Special fans•
Electric defrost (EXR series)•
Hot gas defrost•
Brine as Refrigerant•
© 2009 Ingersoll-Rand Company Limited KB 006-2 EN-PL (06-2009)
KB 006-2 EXA-EXR (06-2009)-EN+ES.pdfKB 006-2 EXA-EXR (06-2009)-EN+DEKB 006-2 EXA-EXR (06-2009)-EN+FRKB 006-2 EXA-EXR (06-2009)-EN+POL
Top Related