HITEC UNIVERSITY TAXILA CANTTDepartment of Mechanical Engineering
June 4, 2013To
The HODMEDHITEC University, Taxila Cantt
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final year student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. I have been awarded with merit scholarship in all the seven
semesters and have also won different Engineering Competitions during my degree. I remained
prominent is extracurricular activities and I had an opportunity to attend internship in four
different industries in Pakistan, including two military industries and now looking for a job in your
esteemed organization to apply my skills of engineering.
My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan(09-ME-086)8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt
June 15, 2013To
The HODMechanical Engg DeptWEC, Wah Cantt
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechanical Engg DeptSMME, NUST Islamabad
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechanical Engg DeptSwedish College, Wah Cantt
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The DeanFMEGIKI, Sawabi
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechanical Engg DeptIIUSE, Islamabad
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HR ManagerEco-PackHattar, KPK
SUBJECT: Application for the post of Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechanical Engg DeptCE&ME, Rawalpindi
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HOD Mechanical Engg DeptAir University, Islamabad
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechanical Engg DeptBahria University, Islamabad
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechanical Engg DeptIIUI
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechanical Engg DeptCTTI, Islamabad
SUBJECT: Application for the post of Instructor (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HR Manager Ghani Glass LtdHattar, KPK
SUBJECT: Application for the post of Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HR Manager Cherat Packaging LtdSawat, KPK
SUBJECT: Application for the post of Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HR ManagerTesla Industries Islamabad
SUBJECT: Application for the post of Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechanical Engg DeptMAJU, Islamabad
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechatronics Engg DeptIIUSE, Islamabad
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechanical Engg DeptIST, Islamabad
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 15, 2013To
The HODMechanical Engg DeptIST, Islamabad
SUBJECT: Application for the post of Lab Engineer (Mechanical).
Respected Sir,
With due respect it is stated that I am a final semester student (8 th Semester) of BS
Mechanical Engineering at HITEC University, Taxila, my current CGPA is 3.79 and my degree
would be complete in August 2013. My final year project is “Design and Manufacturing of Energy
Efficient Injection Molding Machine using self-locking Clamping System” and it is being funded
by Pakistan Science Foundation (PSF). I have been awarded with merit scholarship in all the
seven semesters and have also won different Engineering Competitions during my degree. I
remained prominent is extracurricular activities and I had an opportunity to attend internship in
four different industries in Pakistan, including two renowned military industries.
Now I am looking for a job in your esteemed organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in anticipation for consideration.
Regards,
_____________ Muhammad Khan8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt(0315-5663676)
June 17, 2013
The HODMechanical Engineering DepartmentHITEC University, Taxila Cantt
SUBJECT: Application for the post of Lab Engineer.
Respected Sir,
With due respect it is stated that I am a student of final year of BS Mechanical
Engineering at HITEC University, Taxila, my current CGPA is 3.28 and my degree would be
complete in August 2013. I have participated and won different Engineering Competitions during
my degree. I am looking for a job in your respected organization to apply my skills of engineering.
My CV is attached herewith.
Thanking you in a hope for consideration.
Regards,
_____________ Hafiz kaleem Ullah(09-ME-038)8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt
June 17, 2013
The HODMechanical Engineering DepartmentHITEC University, Taxila Cantt
SUBJECT: Application for the post of Lab Engineer.
Respected Sir,
With due respect it is stated that I am a student of final year of BS Mechanical
Engineering at HITEC University, Taxila, my current CGPA is 2.55 and my degree would be
complete in August 2013. I have participated in different technical Competitions and did research
work during my degree. I am looking for a job in your admired organization to apply my skills of
engineering. My CV is attached herewith.
Thanking you in a hope for consideration.
Regards,
_____________ Saboor Ahmad (09-ME-0116)8th SemesterMechanical Engineering Department HITEC University, Taxila Cantt
Top Related