JERES-L-105 Piping Line Class
and Material Specifications
Revision 5
Responsibility JER Engineering Division
20 May 2009
Jubail Export Refinery Engineering Standard
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 2 of 403
Revision Tracking
Revision Revision Date Scope of Revision
5 20 May 2009 Revised to update paragraph: 9.7.1, 10.12.2, add 10.27.6 & 10.27.7, 10.33.2, 10.33.3, Appendix C.
4 10 February 2009
Revised to update paragrahs: 4.2, 6.9, 7.6, 7.9, 10.12, 10.14, 10.18, 10.27, 10.28, 10.32.2, 10.33.3, all paragraphs relevant to piping line classes in 1.25 Cr – 0.5 Mo and 2.25 Cr - 1 Mo. Add new paragrahs: 9.7, 10.5.7, 10.5.8, 10.6.5, 10.16.25, 10.16.26, 10.16.27, 10.17.15, 10.17.16, 10.21.39, 10.25.17, 10.25.18, 10.37
3 19 November 2008 Revised to update paragraphs: 3.2, 10.2.15,10.2.16
2A 30 September 2008 Revised to update paragraphs: 10.3.4 Add new paragraphs:10.1.3, 10.1.6
2 31 July 2008 Revised to update paragraphs: 1.2, 5, 6, 6.9, 7, 9,10.14, 10.19, 10.26, 10.33 Add new paragraphs: 10.35, 10.36
1 20 May 2008 Updating Issued for bid package Rev. 0 to incorporate technical comments.
0 30 April 2008 Issued for bid package.
03 31 March 2008 Issued for bid package for review.
02 18 December 2007 Issued to add new piping line classes and to incorpotae the utility section to be consistent with others.
01 10 August 2007 The first official JERES-L-105 is issued.
00 03 August 2007 First draft issued is based on Saudi Aramco SAMSS-L-105 “Piping Material Specifications” issue date 30 September, 2003. Document was modified to incorporate amendments and modifications.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 3 of 403
Table of Contents
Section Contents Page
1 Scope 6
2 Conflicts and Deviations 6
3 References 6
4 Definitions 13
5 Piping Line Class Designator System 15
6 Design Requiurements 18
7 Materials Limitation 21
8 Materials Procurement 23
9 Specific Rules for Piping Line Class Tables 23
10 Piping Line Classes 26
10.1 Impact Tested Carbon Steel Line Classes 26
10.2 Basic Carbon Steel Line Classes 32
10.3 HIC Resistant Carbon Steel Line Classes 54
10.4 Carbon Steel Amine Services Line Classes 79
10.5 Carbon Steel Flare System Services Line Classes 89
10.6 Carbon & Low Alloy Steel Boiler Piping Service Line Classes 97
10.7 Carbon & Low Alloy Steel Piping Catalyst & Slurry Services Line Classes 102
10.8 Carbon Steel Caustic Services Line Classes 114
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 4 of 403
10.9 Carbon Steel for Sulfuric Acid Services Line Classes 121
10.10 Carbon steel for Hydrogen Services Line Classes 126
10.11 Carbon steel for Jacketing Service Line Classes 144
10.12 Galvanized Carbon steel Line Classes 146
10.13 Carbon Steel for Toxic and Benzene Service (<95% wt) Line Classes 150
10.14 Carbon Steel for Highly Viscous Service Line Classes 155
10.15 Carbon Steel for Ammonium Bisulfide Service Line Classes 158
10.16 Low and Medium Alloys Steel for Process Services 164
10.17 Low and Medium Alloy Steel for Hydrogen Services 191
10.18 Low and Medium Alloy Steel for Sour Services 207
10.19 Low and Medium Alloy Steel for Toxic and Benzene (<95% wt) Service Line Classes 218
10.20 Steel for High Temperature Service Line Classes 220
10.21 Stainless Steel for Process Service Line Classes 223
10.22 Stainless Steel for Sour Service Line Classes 262
10.23 Stainless Steel for Caustic Services Line Classes 280
10.24 Stainless Steel for Sulphiric Acid Services Line Classes 286
10.25 Stainless Steel Alloys for Hydrogen Services 294
10.26 Stainless Steel for Toxic and Benzene (<95% wt) Services Line Classes 312
10.27 Specialty Alloys for Process Service Line Classes 314
10.28 Specially Alloys for Caustic Service Line Classes 321
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 5 of 403
10.29 Specialty Alloy Steel for Sulfuric Acid Services Line Classes 325
10.30 Specialty Alloys For Ammonium Bisulfide Service Line Classes 332
10.31 Specialty Alloys For Chlorination Service Line Classes 336
10.32 Couper Nickle and others for Water Services Line Classes 338
10.33 Non-Metallic Line Classes 346
10.34 Internally Lined Carbon Steel Line Classes 355
10.35 Carbon Steel for Benzene (≥ 95%) Service Line Classes 362
10.36 Category M (Lethal) Service Line Classes 367
10.37 Impact Tested Carbon Steel for Hydrogen Services 371
Appendixes
A Line Class Designator Field Definition Tables 375
B Fluid Identification Codes 37/
C Piping Line Class Summary Tables 379
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 6 of 403
1 Scope 1.1 This standard provides the basic Piping Line Class from aspects of specification and
designation. The preamble section of this standard must be attached to the relevant selected piping class(es) for the specific project.
1.2 This standard covers the minimum mandatory requirements for the material specifications for piping, valves, and fittings for new piping for use in general, refining, petrochemical, pipelines, and utility services, whose design is in accordance with the applicable ASME B31.1, B31.3, B31.4, or B31.8 Codes.
2 Conflicts, Deviations and Clarifications
2.1 Any conflicts between this standard and other applicable Company Engineering Standards (JERES), Material Specifications (JERMS), Standard Drawings (JERSD), Engineering Procedures (JEREP), Company Forms or Industry standards, specifications, Codes and forms shall be brought to the attention of Company Representative by the Contractor for resolution.
Until the resolution is officially made by the Company Representative, the most stringent requirement shall govern.
2.2 Where a licensor specification is more stringent than those of this standard, the Licensor’s specific requirement shall apply.
2.3 Where applicable Codes or Standards are not called by this standard or its requirements are not clear, it shall be brought to attention of Company Representative by Contractor for resolution.
2.4 Direct all requests for deviations or clarifications in writing to the Company or its Representative who shall follow internal Company procedure and provide final resolution.
3 References
The selection of material and equipment, and the design, construction, maintenance, and repair of equipment and facilities covered by this standard shall comply with the latest edition of the references listed below as of the CUT-OFF DATE as specified in the Contract unless otherwise noted.
3.3 Company References
JERES-A-301 Materials in Wet H2S Services
JERES-B-017 Fire Water System Design
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 7 of 403
JERES-C-102 Basic Process, Process Safety and Environmental Design Requirements and Criteria
JERES-C-103 Standard Specifications for PID Preparation
JERES-L-100 Applicable Codes and Standards for Process Piping System
JERES-L-108 Selection of Valves
JERES-L-109 Selection of Piping Flanges, Stud Bolts and Gaskets
JERES-L-110 Limitations on Pipe Joints and Components
JERES-L-130 Materials ForLow Temperature Services
JERES-L-131 Fracture Control of Carbon Steel Line Pipe
JERES-L-132 Velocity Criteria and Basic Material Selection for Process Piping
JERES-L-133 Corrosion Protection Requirements for Pipelines/Piping and Process Equipment
JERES-L-136 Selection and Restrictions of Carbon Steel Pipe
JERES-L-310 Design of Plant Piping
JERES-L-410 Design of Pipelines
JERES-L-610 Nonmetallic Piping
JERES-S-010 Sanitary Sewers
JERES-S-020 Industrial Drainage and Sewers
JERES-S-050 Sprinkler and Standpipe System Components Buildings
JERES-S-060 Plumbing Code
JERES-W-011 Welding Requirements for On-Plot Piping
JERES-W-012 Welding Requirements for Pipelines
Company Material Specifications
JERMS-H-9005 Shop Applied, Internal Cement Mortar Lining of Steel Pipe
JERMS-H-9091 Qualification Requirements for Shop-Applied Internal FBE Coatings
JERMS-H-9107 Application of Fluoropolymer Coatings to Fasteners
JERMS-H-9115 Hot-Dip Galvanizing for Structural Steel and pipes
JERMS-L-1016 Qualification of Pipeline, In –Plant and pressure Vessel Steels for Resistance to Hydrogen-Induced Craking
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 8 of 403
JERMS-L-1029 RTR (Fiberglass) Sewer Pipe and Fittings for Gravity Flow
JERMS-L-1035 API Line Pipe
JERMS-L-1038 Small Direct Charge Purchases of Pipe
JERMS-L-1332 High Frequency Welded Line Pipe, Class B
JERMS-L-1333 High Frequency Welded Line Pipe, Class C
JERMS-L-2001 Piping Components for Low Temperature Service
JERMS-L-2005 Butt Welding Pipe Fittings
JERMS-L-2011 Forged Steel Weld Neck Flanges for Low, Intermediate and High Temperature Service
JERMS-L-4001 Gate Valves
JERMS-L-4002 Globe Valves
JERMS-L-4003 Additional Requirements for Low Temp. Valves
JERMS-L-4005 Check Valves, Swing Type
JERMS-L-4035 General Requirements for Valves
JERMS-L-4041 Expanding Plug Valves
JERMS-L-4047 High Performance Butterfly Valves
JERMS-L-4050 Gate Valves, Through Conduit Type, API SPEC 6D
JERMS-L-4051 Ball Valves, API 6D
JERMS-L-4053 Steel Lubricated Plug Valves
Company Standard Drawings
JERSD-L-0001 Details of carbon steel Welding Boss, Threaded Connections
JERSD-L-0003 Carbon steel WN & Blind Flanges, Large Sizes-Class 300 RJ
JERSD-L-0008 Spectacle Plates, Blinds and Spacers for Class 125 Cast Iron Flanges
JERSD-L-0009 Spectacle Plates, Blinds and Spacers for carbon steel Class 150 Raised Face Flanges
JERSD-L-0011 Spectacle Plates, Blinds and Spacers for carbon steel Class 600 Raised Face Flanges
JERSD-L-0016 Reinforcement of welded Branch Connections
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 9 of 403
JERSD-L-0017 Spectacle Plates, Blinds and Spacers for Class 250 Raised Face C/I and carbon steel Class 300 RF Flanges
JERSD-L-0018 Spectacle Plates, Blinds and Spacers for carbon steel Class 900 Octogonal Ring Joint Flanges
JERSD-L-0019 Spectacle Plates, Blinds and Spacers for carbon steel Class 1500 Octogonal Ring Joint Flanges
JERSD-L-0021 External Welding Sleeve for Cement Lined Pipe
JERSD-L-0026 Isolating Assembly for Ring Joint Flanges
JERSD-L-0027 Details of carbon steel Welding Boss, Socket-Weld Connections
3.4 Industry Codes and Standards
American Petroleum Institute
API 5L Specification for Line Pipe
API 590 Steel Line Blanks
API 599 Steel and Ductile Iron Plug Valves
API 600 Steel Gate Valves-Flanged and Butt-Welding Ends
API 602 Compact Steel Gate Valves-Flanged, Threaded, Welding, and Extended-Body Ends
API 607 Fire Test for Soft-Seated Quarter-Turn Valves
API 941 Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants
American Society of Mechanical Engineers
ASME B31.1 Power Piping
ASME B31.3 Process Piping
ASME B31.4 Liquid Transportation Systems for Hydrocarbons, Liquid Petroleum Gas, Anhydrous Ammonia, and Alcohols
ASME B31.8 Gas Transmission and Distribution Piping Systems
ASME B16.1 Cast Iron Pipe Flanges and Flanged Fittings
ASME B16.3 Malleable Iron Threaded Fittings
ASME B16.5 Pipe Flanges and Flanged Fittings
ASME B16.9 Factory-Made Wrought Steel Buttwelding Fittings
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 10 of 403
ASME B16.11 Forged Steel Fittings, Socket-Welding and Threaded
ASME B16.12 Cast Iron Threaded Drainage Fittings
ASME B16.21 Nonmetallic Gaskets for Pipe Flanges
ASME B16.22 Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
ASME B16.28 Wrought Steel Buttwelding Short Radius Elbows and Returns
ASME B16.34 Steel Valves
ASME B16.39 Malleable Iron Threaded Pipe Unions
ASME B16.42 Ductile Iron Pipe Flanges and Flanged Fittings
ASME B16.47 Large Diameter Flanges
American Society for Testing and Materials
ASTM A36 Structural Steel
ASTM A53 Pipe, Steel, Black and Hot-Dipped, Zinc Coated, Welded and Seamless
ASTM A74 Cast Iron Soil Pipe and Fittings
ASTM A105 Forgings, Carbon Steel, for Piping Components
ASTM A106 Seamless Carbon Steel Pipe for High Temperature Service
ASTM A126 Gray Iron Castings for Valves, Flanges, and Pipe Fittings
ASTM A182 Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves, and Parts for High Temperature Service
ASTM A193 Alloy-Steel and Stainless Steel Bolting Materials for High Temperature Service
ASTM A194 Carbon and Alloy Steel Nuts for Bolts for High-Pressure and High Temperature Service
ASTM A216 Steel Casting, Carbon, Suitable for Fusion Welding for High Temperature Service
ASTM A217 Steel Casting, Martensitic Stainless and Alloy, for Pressure-Containing Parts Suitable for High Temperature Service
ASTM A234 Pipe Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures
ASTM A240 Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Pressure Vessels
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 11 of 403
ASTM A269 Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A307 Carbon Steel Bolts and Studs, 60,000 psi Tensile
ASTM A312 Seamless and Welded Austenitic Stainless Steel Pipe
ASTM A335 Seamless Ferritic Alloy Steel for High-Temperature Service
ASTM A350 Forgings, Carbon and Low-Alloy Steel Requiring Notch Toughness Testing for Piping Components
ASTM A351 Steel Castings, Austenitic, for High-Temperature Service
ASTM A395 Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
ASTM A403 Wrought Austenitic Stainless Steel Piping Fittings
ASTM A494 Castings, Nickel and Nickel Alloy
ASTM A563 Carbon and Alloy Steel Nuts
ASTM A789/A789M Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
ASTM A790/A790M Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
ASTM B61 Steam or Valve Bronze Castings
ASTM B62 Composition Bronze or Ounce Metal Castings
ASTM B88 Seamless Copper Water Tube
ASTM B165 Nickel-Copper Alloy Seamless Pipe and Tube
ASTM B169 Aluminum-Bronze Plate, Sheet, Strip, and Rolled Bar (UNS C61400)
ASTM B366 Factory-Made Wrought Nickel-Alloy Welding Fittings
ASTM B407 Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
ASTM B409 Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
ASTM B462 Forged or Rolled UNS N08020, UNS N08024, UNS N08026, and UNS N08367 Alloy Pipe Fittings, and Valves and Parts for Corrosive High-Temperature Service
ASTM B463 Forged or Rolled UNS N08020, UNS N08024, UNS N08026 Alloy Plate, Sheet, and Strip
ASTM B464 Welded Chromium-Nickel-Iron-Molybdenum-Copper-Columbium Stabilized Alloy (UNS N08020)Pipe
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 12 of 403
ASTM B466 Seamless Copper-Nickel Pipe and Tube (UNS C706(10)
ASTM B467 Welded Copper-Nickel Pipe (UNS C71500)
ASTM B474 Electric Fusion Welded UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Pipe
ASTM B530 Method for Measurement of Coating Thicknesses by Magnetic Method, Electrodeposited Nickel Coatings on Magnetic and Non-Magnetic Substrates
ASTM B564 Nickel Alloy Forgings
ASTM D1784 Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Viny Chloride) (CPVC) Compounds
ASTM D1785 Poly(Vinyl Chloride (PVC) Plastic Pipe, Schedules 40, 80, and 120
ASTM D2467 Socket-Type Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM D2564 Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
ASTM D2665 Practice for Operating Xenon Arc-Type Light Exposure Apparatus With and Without Water for Exposure of Plastics
ASTM D3034 Type PSM Poly(Vinyl Chloride)(PVC) Sewer Pipe and Fittings
ASTM D3311 Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM F437 Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM F439 Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings
ASTM F441 Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
ASTM F493 Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
Chlorine Institute
Chlorine Institute Pamphlet 6
Manufacturers Standardization Society
MSS SP-83 Steel Pipe Unions, Socket-Welding and Threaded
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 13 of 403
National Association of Corrosion Engineers
NACE MR0103 Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments – 2005 edition.
4 Definitions
4.1 Definitions presented in this Standard and other JER documents have precedence over other definitions. Conflicts between various definitions shall be brought to the attention of Company Representative by the Contractor for resolution.
Company: Jubail Export Refinery.
Company Representative: A designated person from the Company or an assigned third party representative.
Company Inspector: A designated person or an agency responsible for conducting inspection activities on behalf of the Company.
4.2 List of Definitions
Amine Services: All amine solutions including: MDEA, DEA, MEA, DGA, ADIP and similar.
Caustic Services: All sodium hydroxide solutions.
General Services: Includes piping classes required for GOSP’s, WIP’s, gas plants, pump stations, water treatment, and water injection plants and refers to both normal fluid services and Category D fluid service as defined in B31.3.
Hazardous Air Pollutant Service: a service containing a Hazardous Air Pollutant as defined in JERES-C-102.
Hydrocarbon Services: Process streams of liquid or gaseous hydrocarbon materials, including two and three phase hydrocarbon materials.
Hydrogen Services: Process streams containing relatively pure hydrogen and component streams containing hydrogen with a partial pressure of 350 Kpa (abs) and higher.
NPS: This means Nominal Pipe Size.
Sour-Wet Services: For definition, refer to JERES-A-301.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 14 of 403
Steam Services: All steam and condensate at operating pressures above 100 kPag.
Toxic service: a service containing a potentially toxic material as defined in JERES-C-102.
4.3 Abbreviations
4.3.1 The following abbreviations are used in this standard for valve descriptions;-
BB Bolted Bonnet
BC Bolted Cover
ISNRS Inside Screw Non-Rising Stem
ISRS Inside Screw Rising Stem
OS&Y Outside Screw and Yoke
PSB Pressure Seal Bonnet
PSC Pressure Seal Cover
BST Bellow Seal Type
WB Welded Bonnet
WC Welded Cover
TRIM Stem, body seating surface, disc and gate seating surface, Backseat, ball, plug, etc., and all other parts in contact with line fluid. Refer to Table 1 for trim designation numbers. Whenever “full” is used, it means that all parts shall be made from the material specified and not just the surface mating material
HF Hard Faced (Stellite No. 6)
Table 1 – Simplified Trim Number Designations
TRIM NO. BODY SEAT
SURFACE MATERIAL CLOSURE MEMBER
SURFACE MATERIAL 1 13 CR 13 CR
2 SS 304 SS 304
3 SS 310 SS 310
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 15 of 403
4 13 CR Hardened 13 CR Hardened
5 Stellite 6 hardfacing Stellite 6 hardfacing
5A NI-CR hardfacing NI-CR hardfacing
6 13 CR CU-NI
7 13 CR hardened 13 CR
8 Stellite 6 hardfacing 13 CR
8A NI-CR hardfacing 13 CR
9 Monel Monel
10 SS 316 SS 316
11 Monel NI-CR or Stellite 6 hardfacing
12 SS 316 NI-CR or Stellite 6 hardfacing
13 Alloy 20 Alloy 20
14 Alloy 20 NI-CR or Stellite 6 hardfacing
Notes for Table-1:
− This table is a simplified version of Table 3 in API 600. It’s only purpose is to aid in understanding the trim number designations listed in the Piping Material Classes
− Trim selection are governed by JERES-L-108 and the applicable JERMS
− When a combination trim is shown (Trim No.’s 6, 7, 8, 8A, 11, 12, or 1(4), the seating surface materials of the seat and closure member may be interchanged
4.3.2 The abbreviations list for fluid service identification are presented in Appendix-B.
5 Piping Line Class Designator System
5.1 The base piping line class designator system consists of five alpha-numeric fields containing one to three characters each. Each field describes various features of the piping line class. The total number of characters in these fields is eight.
Commentary Notes:
The system is based on Process Industry Practices (PIP) to provide a uniform standard consistent with industry practices and specific Company requirements.
5.2 The fifth Exceptions, modification, or additions may be made to the base specification, by adding a numeric or alphabatic single character after the fourth field to indicate the changes made. Refer to paragraph 5.6 for more details.
5.3 Field Definitions and Examples
The following system establishes procedures used for identifying line classes.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 16 of 403
Table-1: Piping Line Class Field Definition
Field Location
First Second Third Forth Fifth
Representation Flange Face & rating
Basic Material Corrosion Allowance
Main Service Type
Refer to Table-2
Character Type
Numeric Alphabetic Numeric Alphabetic Alphabetic or Numeric
Number of Characters
Triple Double Single Single Single
Example 103 CH 2 S M
Explanation 1: Raised Face 03: 300# rating
HIC resistant carbon steel
3 mm corrosion allowance
Wet H2S sour service
Category M service
5.3.1 First Field
The first field is a three digit numeric character. It defines the flange facing and rating as follows: the first digit (from left) is for flange facing and second two digits represent the pressure rating. The details are in the Appendix A – paragraph A.1.
5.3.2 Second Field
The second field defines the basic pipe material and consists of two alpha characters. For details refer to the Appendix A – Table A.2.
5.3.3 Third Field
The third field defines the corrosion or erosion allowance and consists of one numeric character. For details refer to the Appendix A – Table A.3.
5.3.4 Fourth Field
The fourth field defines the service and consists of one alpha character. Refer to the Appendix A– Table A-4.
5.3.5 Fifth Field
The fifth field is not usually used except for the specific cases listed in following Table:
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 17 of 403
Table-2: Line Class Fifth Field Definition
Fifth Field Location
Condition Numeric Alphabetic
Specialty Valves 1
Pipelines to ASME B31.4 4
Pipelines to ASME B31.8 8
High Concentration (>95% wt) Benzene service
B
Buried Plant Piping G
Category M (lethal) Service M
5.4 Fields List
The complete list of all fields used in generated line class designators are complied in Appendix-A. These designators shall be used to maximum, and in any case where classes or materials are not available Company shall be consulted to create new ones.
5.5 Line Class Example
The piping line class example presented in Table-1 of paragraph 5.3.1 is "103CS1P". This designator specifies an ASME pressure raised face class 300 flanges, with carbon steel piping system with 1.5 mm corrosion allowance designed for general process service with no changes to the base piping line class material specification.
5.6 Modification Suffix (Fifth field)
A base individual line class material specification may have modifications/additions by adding a numeric or alphabatic character to the base line class designator as outlined in Table-2 of paragraph 5.3.5.
Example: line class 101CS1P1 is based on 101CS1P. The modification in this case is 101CS1P1 that foresees 316 ss valve trim (instead of 13 Cr as 101CS1P).
A base individual line class can have more than one modification/addition, e.g. 106CS0P4 is based on 106CS1P and means the piping system is designed as transportation pipeline in accordance with ASME B31.4 with zero corrosion allowance.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 18 of 403
5.7 Company Fluid Service Codes
Company service codes are listed in Table A-4 of Appendix A and shall be included in conjunction with the line class designators on the P&ID's and other drawings.
Example: 6"-FG-123-101CS1P is a 6-inch fuel gas line number 123 and material specification 101CS1P.
5.8 Piping Line Class Summary
The entire piping line classes are summarized in Appendix C. The following table is an extract representation of this Piping Line Class Summary
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
101CA1P
150 RF
Spiral W. SS316 Graphite A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
1.5 SS 316 -45
340
18.4 Process
103CA1P
300 RF
Spiral W. SS316 Graphite A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
1.5 SS 316 -45
340
48.0 Process
101CS1P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
19.6 Process
101CS2P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3 13 Cr -29
425
19.6 Process
101CS4P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 6 13 Cr -29
425
19.6 Process
6 Design Requirements
6.1 General
6.1.1 All piping shall be designed in accordance with the applicable ASME B31 Code as specified in the individual line classes as supplemented by: JERES-L-100, JERES-L-310, JERES-L-410, and JERES-L-610.
6.1.2 Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 19 of 403
6.1.3 Feedwater piping upstream and steam piping downstream of ASME Section I shall be designed in accordance with ASME B31.3. Boiler utility P&ID's shall show these Code breaks.
6.2 Corrosion Allowance
6.2.1 The individual piping classes specify the amount of corrosion allowance included in the pipe wall and fitting schedules.
6.2.2 Where services require additional corrosion allowance they shall be determined based on the criteria specified in JERES-L-133.
6.3 Void.
6.4 Pipe
6.4.1 Limitations on pipe sizes per the applicable JERES-L-310 or JERES-L-410 shall apply.
The minimum pipe size shall be 3/4 " NPS (Nominal Pipe Size) except tubing and piping used in Category D Fluid, individual instrument leads, pump and compressor auxiliary piping, steam tracing, and for reduction at instruments or other equipment having connections smaller than 1/4" NPS.
6.4.2 Pipe sizes: 1¼", 2½", 3½" and 5" shall not be used except for connections to equipment requiring these sizes. In these cases a suitable transition shall be made as close as possible to the equipment.
6.4.3 Carbon steel piping materials classes specify low yield strength materials, such as grade B, X42 or equivalent.
For transportation pipelines designed in accordance of ASME B31.4 or ASME B31.8 higher grade carbon steel can be used but not higher than X-65.
For repairs and maintenance when low yield strength materials are not available, high yield strength materials: X42 through X60, as listed in ASME B31.3 may be substituted.
6.4.4 Seamless or submerged-arc straight seam-welded pipes shall be used within plant limits (within the fenced area of the plant) for piping designed to the ASME B31.3 code.
6.4.5 Electrical Resistance Welded (ERW) and high frequency induction welded pipe in addition to seamless and welded pipe with straight or spiral seam are permitted outside process plant limits for piping designed to ASME B31.4 and B31.8 codes. This is subject to prior approval per Section 2 of this standard.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 20 of 403
6.5 Joints, Flanges, and Fittings
6.5.1 The type of joints, flanges, and fittings shall be in accordance with the individual piping classes.
6.5.2 Locknuts, street elbows (one end with female threads and the other end with male threads), street tees and reducing elbows are not permitted.
6.5.3 Forged welding outlets conforming to ASME B16.11 fitting pressure class 3000 or 6000 may be used in lieu of JERSD-L-0001 or JERSD-L-0027.
6.5.4 Plugs shall be round headed type.
6.6 Flange Stud Bolts and Nuts
6.6.1 Stud bolts and nuts shall be purchased in accordance with the specific ASTM number per individual piping class.
6.6.2 For near-shore and underground piping, ASTM A193-B7/ASTM A194-2H with ceramic-fluoropolymer coating per JERMS-H-9107 or DURABOLT (by Saudi Conduit Coating Company; Al Khobar, KSA) or equivalent shall be used.
6.6.3 If DURABOLT is not available, the following alternatives may be used:
a) corrosion-resistant alloys,
b) painting the exposed portions of the bolts and sealing the gap between flange faces,
c) encapsulating the bolted flange connection with heat shrinkable tubing.
6.7 Insulating Gaskets/Kits
6.7.1 For dissimilar metals connections; examples: a stainless steel flange to carbon steel flange, or a Cu-Ni flange to carbon steel flange, the potential for galvanic corrosion shall be determined in consultation with the Company Representative.
6.7.2 Where potential galvanic corrosion exists, the types of joints are restricted as follows:
1) For flanged joints of dissimilar metals, insulating gaskets, stud bolt sleeves and washers such as PIKOTEK, or approved equal.
(2) For non-flanged mechanical joints of dissimilar metals, a dielectric union.
(3) Welded joints of dissimilar metals are not permitted.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 21 of 403
6.7.3 Where potential galvanic corrosion does not exist, standard joints and welds are acceptable, except that welded joints have some additional restrictions as specified in JERES-W-011 and JERES-W-012.
6.8 Flange Gaskets
6.8.1 The type of gasket shall be selected based on the requirements of JERES-L-109 and this standard.
6.8.2 Spiral-wound gaskets shall be specified with inner rings as required by JERES-L-109.
6.9 Valves
The types of valves and valve trims to be used are to be in accordance with the individual line classes based on the service conditions and the limitations detailed in JERES-L-108.
Prohebitions and limitations imposed by JERES-L-108 shall supersede valves slection provided by an individual class.
Commentary Note:
Line classes are developed to cover wide range of application.
6.10 Branch Connection
Branch connections for new construction of metallic piping shall be made in accordance with JERES-L-110.
7 Materials Limitation
7.1 General
7.1.1 The piping material specifications (line classes) in this standard are the basic material descriptions for: pipe, valves and fittings which have been selected for specific services.
7.1.2 Alternative carbon steel materials are acceptable provided they meet the requirements of JERES-L-132.
7.1.3 Materials containing asbestos are prohibited.
7.1.4 Materials for piping, fittings and valves in hydrogen service shall be selected in accordance with API 941 and within the maximum temperatures specified per individual line class.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 22 of 403
7.1.5 Use of Duplex stainless steel shall be limited to water service, containing a maximum of 2 kPa partial pressure H2S.
7.2 Impact Testing (pipe and fittings)
7.2.1 The requirements for impact testing are to be based on application of materials and in accordance with ASME B31.3, paragraph 323.3.
7.2.2 Impact test may be required per ASME B31.3 Fig. 323.2.2, Curve B for A106 and API Grade B and API 5L X-grade pipe materials normalized or quenched and tempered, having a wall thickness greater than 15 mm at design temperature at minus 29°C and lower.
7.3 Postweld Heat Treatment (pipe and fittings)
7.3.1 Postweld heat treatment (PWHT) shall be specified when required by the applicable Code or for service conditions per this standard.
7.3.2 For carbon steel piping, the following services require PWHT. Other process conditions may also require PWHT as determined during project design or as specified by Company Representative.
(1) All caustic soda solutions at all temperatures.
(2) All monethanolamine (MEA) solutions at all temperatures.
(3) All diglycol amine (DGA) solutions above 140°C design temperature.
(4) All rich amino diisopropanol (ADIP) solutions above 90°C design temperature.
(5) All lean ADIP solutions above 60°C design temperature.
7.4 Flanges (loose)
Materials for forged carbon steel weld neck flanges for use from minus 50 to plus 425°C shall conform and be purchased to the requirements of this standard and JERMS-L-2011.
7.5 Low-Temperature Components (pipe and fittings)
The materials and purchasing requirements of carbon steel piping components for low-temperature services shall conform to the requirements of this standard and JERMS-L-2001.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 23 of 403
7.6 Pipe
The materials and purchasing requirements of API 5L and carbon steel ASTM pipe materials both welded and seamless shall conform to the requirements of this standard and the following JERMS's:
(1) JERMS-L-1016 for pipe in wet H2S services as required by A-301.
(2) JERMS-L-1035 for API Line Pipe (large orders).
(3) JERMS-L-1038 or JERMS-L-1035 for plant piping.
(4) JERES-L-130, for services with minimum design temperatures between – 29°C and -45°C.
(5) JERMS-L-1332, for API 5L ERW pipe.
7.7 Buttweld Fittings
The materials and purchasing requirements of carbon steel buttweld fittings to: ASTM A234 Grade WPB and MSS SP-75 shall conform to the requirements of this standard and JERMS-L-2005.
7.8 Valves
All valves shall be specified in accordance with the generic descriptions detailed in the individual line classes and the additional requirements of the JERMS-L-4000 series as applicable.
7.9 Requirements for sour service (valves)
When a particular service is wet sour, requirements of JERES-A-301 shall apply.
8 Material Procurement
8.1 Piping materials shall be procured from Company approved manufacturers.
9 Specific Rules for Piping Line Class Tables
9.1 The tables of piping line classes presented in Section 10 provide detailed description of each piping line class dedicated for a specific service.
9.2 Piping classes listed in Section 10 are based on above ground and assume that the applicable code is ASME B31.3 for the majority and few are for ASME B31.1.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 24 of 403
9.3 Piping Line Class for Pipelines
9.3.1 Transportation piping systems shall use the ASME B31.4 or ASME B31.8 as applicable.
9.3.2 The applicable piping line class shall be selected from Section 10 with the proper material and service group applicable to the service fluid which will be carried by the pipeline with following general rules:
− the corrosion allowance is usually zero for pipelines,
− the common material is basic carbon steel with grades ranging from grade B to X-65,
− pipe wall shall be optimized and cost effectively calculated as stipulated in JERES-L-410
− The allowable stress are based on the applicable ASME B31.4 or ASME B31.8 in addition to reqiurments of JERES-L-410
9.4 Piping Class for Underground Plant Piping
9.4.1 The underground piping within the plant area shall use the same above ground piping line class with a fifth modifier G.
9.4.2 The fifth modifier G indicates the following:
− the pipe is buried,
− the piping is externally coated with appropriate coating system capable to withstand anticipated temperatures,
− flanged connections are minimized
9.5 Gravity Sewer Piping
For gravity sewer the appropriate piping class from material point of view shall be used with following consideration:
− the pipe is usually buried,
− a fifth modifier of G shall be used at the end of the class,
− the applicable design standards are JERES-S-020
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 25 of 403
9.6 Category M (Lethal) Service
In case of Lethal service application, the following requirements shall be applied to the prescriptions of the line classes provided:
− All block valves shall satisfy the following:
a) Tightness class: “A” according to ISO-15848, part I, table 1. Test fluid shall be helium (class AH)
b) Endurance class: CO2 (1500 cycles)
c) Temperature class: 400°C according to ISO-15848, part I, table 3.
− Minimize the number of flanges.
− The surface roughness of flange face shall be < 3.2 μm
− Shop and field welds shall be 100% radiography. Threaded connections shall be avoided.
9.7 Fire Water Service
9.7.1 For fire water piping system, the following piping classes with the limitation inmposed shall apply:
a) 301FE0W: Shall be used for main underground piping distribution systems.
b) 301LE0W: For above ground, internally coated line is allowed for distribution systems that will be not exposed to fire.
c) 301BD0W: to be used for take-off connections, small diameter piping distribution, etc.
d) 301CG0W: Can be used for dry-wet fire water piping system. Pipe size is limited to 8 inches maximum.
e) Higher alloy material suitable for water service (other than 301LE0W) such 103SP1P can be used for small diameter piping systems.
9.7.2 Fire hydrants are considered specialty commodity and shall comply with details of JERES-B-017 for design and material.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 26 of 403
10 Piping Line Classes
The following tables provide detailed description of each assigned piping line class.
10.1 Impact Tested Carbon Steel Line Classes
10.1.1 Line Classes Notes
The following Notes shall apply to all of the impact tested carbon steel classes family (101CA1P) and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight seam welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges to be same as pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Flanges
Refer to JERES-L-109 for flange material selection.
(8) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 27 of 403
10.1.2 Line Class: 101CA1P Line Class: 101CA1P Basic Material: Low Temp CS Max. Temperature: 340°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -45 100 200 300 340 Pressure Rating (bar) (2) 18.4 17.4 13.8 10.2 8.8
Item Size Rating Schedule Type Specification Notes
Up to 3/4" S-160 1" to 2" S-80 3" to 10” S-40 12” to 18” S-20
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2
(1) (2) (3)
1½" and under Class acc. B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A420 Gr. WPL6, B16.9 (5)
Nipples and Swages 1½" and under Seamless A333 Gr. 6 or
API 5L Gr. B + Impact Test at -45°C
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A350 Gr. LF2 CL. 1,
MSS SP 97 (4)
Weldolets 2" and above Buttweld A350 Gr. LF2 CL. 1 MSS SP 97
1½" and under Class 150 Socketweld RF (7) FLANGES
2" and above Class 150 Weldneck RF A350 Gr. LF2 CL. 1, B16.5
(7) BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6)
GATE VALVES
2" and above Class 150 RF Flanged A352-LCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12 (6)
GLOBE VALVES 2" and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite
packing, Trim No. 12 (6)
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BC, Trim No. 10 (6) CHECK VALVES
2" and above Class 150 RF Flanged A352-LCB body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, floating ball, fire safe, RTFE seats, Trim No. 10
(6)
2" to 4" Class 150 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) BALL VALVES
6" and above Class 150 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim 316 (6)
Notes: Notes (1) through (8) of 10.1.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 28 of 403
10.1.3 Line Class: 101CA2P Line Class: 101CA1P Basic Material: Low Temp CS Max. Temperature: 340°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -45 100 200 300 340 Pressure Rating (bar) (2) 18.4 17.4 13.8 10.2 8.8
Item Size Rating Schedule Type Specification Notes
Up to 3/4" S-160 1" to 2" S-80 3" to 10” S-40 12” to 18” S-20
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2
(1) (2) (3)
1½" and under Class acc. B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (4) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A420 Gr. WPL6, B16.9 (5)
Nipples and Swages 1½" and under Seamless A333 Gr. 6 or
API 5L Gr. B + Impact Test at -45°C
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A350 Gr. LF2 CL. 1,
MSS SP 97 (4)
Weldolets 2" and above Buttweld A350 Gr. LF2 CL. 1 MSS SP 97
1½" and under Class 150 Socketweld RF (7) FLANGES
2" and above Class 150 Weldneck RF A350 Gr. LF2 CL. 1, B16.5
(7) BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6)
GATE VALVES
2" and above Class 150 RF Flanged A352-LCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12 (6)
GLOBE VALVES 2" and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite
packing, Trim No. 12 (6)
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BC, Trim No. 10 (6) CHECK VALVES
2" and above Class 150 RF Flanged A352-LCB body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, floating ball, fire safe, RTFE seats, Trim No. 10
(6)
2" to 4" Class 150 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) BALL VALVES
6" and above Class 150 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim 316 (6)
Notes: Notes (1) through (8) of 10.1.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 29 of 403
10.1.4 Line Class: 103CA1P Line Class: 103CA1P Basic Material: Low Temp CS Max. Temperature: 340°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -45 100 200 300 340 Pressure Rating (bar) (2) 48.0 45.3 42.5 38.7 36.9
Notes: Notes (1) through (8) of 10.1.1 are applicable.
Item Size Rating Schedule Type Specification Notes
Up to 3/4" S-160 1" to 2" S-80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2
(1) (2) (3)
1½" and under Class acc. B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A420 Gr. WPL6, B16.9 (5)
Nipples and Swages 2" and under Seamless A333 Gr. 6 or
API 5L Gr. B + Impact Test at -45°C
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A350 Gr. LF2 CL. 1,
MSS SP 97 (4)
Weldolets 2" and above Buttweld A350 Gr. LF2 CL. 1 MSS SP 97
1½" and under Class 300 Socketweld RF (7) FLANGES
2" and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.5
(7) BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6)
GATE VALVES
2" and above Class 300 RF Flanged A352-LCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12 (6)
GLOBE VALVES 2" and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, graphite
packing, Trim No. 12 (6)
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A352-LCB body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, fire s.Trim No. 10 (6)
2" to 4" Class 300 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) BALL VALVES
6" and above Class 300 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim 316 (6)
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 30 of 403
10.1.5 Line Class: 103CA2P Line Class: 103CA2P Basic Material: Low Temp CS Max. Temperature: 340°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -45 100 200 300 340 Pressure Rating (bar) (2) 48.0 45.3 42.5 38.7 36.9
Notes: Notes (1) through (8) of 10.1.1 are applicable.
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2
(1) (2) (3)
1½" and under Class acc. B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A420 Gr. WPL6, B16.9 (5)
Nipples and Swages 2" and under Seamless A333 Gr. 6 or
API 5L Gr. B + Impact Test at -45°C
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A350 Gr. LF2 CL. 1,
MSS SP 97 (4)
Weldolets 2" and above Buttweld A350 Gr. LF2 CL. 1 MSS SP 97
1½" and under Class 300 Socketweld RF (7) FLANGES
2" and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.5
(7) BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6)
GATE VALVES
2" and above Class 300 RF Flanged A352-LCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12 (6)
GLOBE VALVES 2" and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, graphite
packing, Trim No. 12 (6)
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A352-LCB body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, fire s.Trim No. 10 (6)
2" to 4" Class 300 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) BALL VALVES
6" and above Class 300 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim 316 (6)
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 31 of 403
10.1.6 Line Class: 106CA1P
Line Class: 106CA1P Basic Material: Low Temp CS Max. Temperature: 340°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -45 100 200 300 340 Pressure Rating (bar) (2) 102.1 93.2 87.6 79.6 72.7
Item Size Rating Schedule Type Specification Notes
¾" S-160 1" to 2" S-80
3" S-40 4” to 18” S-80
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) (3) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2
1½" and under Class acc. to B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A420 Gr. WPL6, B16.9 (5)
Nipples and Swages 2" and under Seamless A333 Gr. 6 or
API 5L Gr. B + Impact Test at -45°C
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A350 Gr. LF2 CL. 1,
MSS SP 97 (4)
Weldolets 2" and above Buttweld A350 Gr. LF2 CL. 1 MSS SP 97
1½" and under Class 600 Socketweld RF (7) FLANGES
2" and above Class 600 Weldneck RF A350 Gr. LF2 CL. 1, B16.5
(7) BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6)
GATE VALVES
2" and above Class 600 RF Flanged A352-LCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12 (6)
GLOBE VALVES 2" and above Class 600 RF Flanged A352-LCB body, BB, OS&Y, graphite
packing, Trim No. 12 (6)
1½" and under Class 800 Socketweld/ Threaded
A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 600 RF Flanged A352-LCB body, BC, Trim No. 10 (6)
1½" and under Class 600 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, fire s.Trim No. 10 (6)
2" to 4" Class 600 RF Flanged A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, fire s.Trim No. 10 (6) BALL VALVES
6" and above Class 600 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6)
Notes: Notes (1) through (8) of 10.1.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 32 of 403
10.2 Basic Carbon Steel Line Classes
10.2.1 Line Classes Notes
The following Notes shall apply to all of the carbon steel classes family (101CS1P) and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) Butterfly valves API 609 Category A may be used for utility/water service applications
(10) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 33 of 403
10.2.2 Line Class: 101CS1P Line Class: 101CS1P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Notes: Notes (1) through (10) of 10.2.1 are applicable.
Item Size Rating Schedule Type Specification Notes
¾" Sch160 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B PIPE
20” and above calculate Welded API 5L Gr. B
(1) (2) (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 150 Socketweld RF FLANGES
2" and above Class 150 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8 (6)
GATE VALVES 2" and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite
packing, API 600, Trim No. 8 (6)
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 8 (6)
GLOBE VALVES 2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y,
graphite packing, Trim No. 8 (6)
1½" and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 1
(6) CHECK VALVES 2" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim ENP
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC, Trim ENP (6)
PLUG VALVES 2" and above Class 150 RF Flanged
A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim ENP
(6)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 34 of 403
10.2.3 Line Class: 101CS2P
Line Class: 101CS2P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating
Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3" to 4” S-80
6" to 10” S-40 12" to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 150 Socketweld RF FLANGES
2" and above Class 150 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No. 8 (6)
GATE VALVES 2" and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite
packing, API 600, Trim No. 8 (6)
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 8 (6)
GLOBE VALVES 2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y,
graphite packing, Trim No. 8 (6)
1½" and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2" to 4" Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC, Trim ENP (6)
PLUG VALVES 2" and above Class 150 RF Flanged
A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim ENP
(6)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP
Notes: Notes (1) through (10) of 10.2.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 35 of 403
10.2.4 Line Class: 101CS4P Line Class: 101CS4P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
Up to 2" S-XXS 3" S-160 4" S-120 6” S-80
8” to 10” S-60 12” to 16” S-40
18” S-30
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above Calculate Welded API 5L Gr B (3) FITTINGS El's Tees,
Reducers, Caps, etc.
1" and above
Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 1” and above Buttweld A 105N MSS SP 97
FLANGES 1” and above Class 150 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
2" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2½" and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 8 (6)
2" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2½" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8 (6)
2" and under Class 150 RF Flanged A105N body, BC, Trim No. 1
(6)
CHECK VALVES 2½" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
2" and under Class 150 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10
(6) (7)
2" to 4" Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim ENP
(6) (7)
1½" and under Class 150 RF Flanged A105N body, lubricated, inverted pressure balanced, BC, Trim ENP (6)
PLUG VALVES 2" and above Class 150 RF Flanged
A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim ENP
(6)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP
Notes: In addition to the notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 36 of 403
10.2.5 Line Class: 103CS1P Line Class: 103CS1P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
¾” Sch 160 1” to 2” Sch 80
3” to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless
A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr B (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2” and above Buttweld A 105N MSS SP 97
1½” and under Class 300 Socketweld RF
FLANGES 2” and above Class 300 Weldneck RF
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2” and above Class 300 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 8 (6)
1½” and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 8 (6)
GLOBE VALVES 2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y,
graphite packing, Trim No. 8 (6)
1½” and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 1
(6) CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim ENP
(6) (7)
1½” and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC Trim ENP (6)
PLUG VALVES 2” and above Class 300 RF Flanged
A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim ENP
(6)
BUTTERFLY VALVES 4” and above Class 300 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP
Notes: Notes (1) through (10) of 10.2.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 37 of 403
10.2.6 Line Class: 103CS2P
Line Class: 103CS2P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless
A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 300 Socketweld RF FLANGES
2" and above Class 300 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8 (6)
GATE VALVES 2" and above Class 300 RF Flanged A216-WCB body,BB, OS&Y, graphite
packing, API 600, Trim No. 8 (6)
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim ENP
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC Trim ENP (6)
PLUG VALVES 2" and above Class 300 RF Flanged
A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim ENP
(6)
BUTTERFLY VALVES 4" and above Class 300 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP
Notes: Notes (1) through (10) of 10.2.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 38 of 403
10.2.7 Line Class: 103CS4P
Line Class: 103CS4P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
Up to 2" S-XXS 3" S-160 4” S-120
6" to 8” S-80 10” to 18” S-60
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above
Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 1” and above Buttweld A105N MSS SP 97
FLANGES 1” and above Class 300 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
2" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2½" and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
2" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2½" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 2" and under Class 300 RF Flanged A105N body, BC,Trim No. 1 (6)
CHECK VALVES 2½" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 1 (6) 2" and under Class 300 RF Flanged A105N body, floating ball, RTFE
seats, Trim No. 10, fire safe (6) (7)
2" to 4" Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim ENP
(6) (7)
1½" and under Class 300 RF Flanged A105N body, lubricated, inverted pressure balanced, BC, Trim ENP
(6) PLUG VALVES
2" and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim ENP
(6)
BUTTERFLY VALVES 4" and above Class 300 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP
Notes: Notes (1) through (10) of 10.2.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 39 of 403
10.2.8 Line Class: 106CS1P
Line Class: 106CS1P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 102.1 93.2 87.6 79.6 72.7 57.5
Item Size Rating Schedule Type Specification Notes
¾" S-160 1" to 2" S-80
3" S-40 4” to 18” S-80
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 600 Socketweld RF FLANGES
2" and above Class 600 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 600 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2" and above Class 600 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 600 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC Trim ENP
(6)
PLUG VALVES 2" and above Class 600 RF Flanged
A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim ENP
(6)
BUTTERFLY VALVES 4" and above Class 600 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP
Notes: Notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 40 of 403
10.2.9 Line Class: 106CS2P
Line Class: 106CS2P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 102.1 93.2 87.6 79.6 72.7 57.5
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1" to 2" S-160 3” to 18” S-80
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 600 Socketweld RF FLANGES
2" and above Class 600 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 600 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2" and above Class 600 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 600 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC Trim ENP
(6) PLUG VALVES
2" and above Class 600 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim ENP
(6)
BUTTERFLY VALVES 4" and above Class 600 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP
Notes: Notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 41 of 403
10.2.10 Line Class: 106CS4P
Line Class: 106CS4P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 102.1 93.2 87.6 79.6 72.7 57.5
Item Size Rating Schedule Type Specification Notes
Up to 2" S-XXS 3" to 4" S-160 6" to 8” S-120
10” to 18” S-100
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3) FITTINGS El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 1” and above Buttweld A 105N MSS SP 97 FLANGES 1” and above Class 600 Weldneck RF A 105N MSS SP 97 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 600 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6)
GATE VALVES
2" and above Class 600 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 600 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 1½" and under Class 600 RF Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 600 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 600 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10
(6) (7)
2" to 4" Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10, fire s.
(6) (7) BALL VALVES
6" and above Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim ENP
(6) (7)
1½" and under Class 600 RF Flanged A105N body, lubricated, inverted pressure balanced, BC Trim ENP
(6) PLUG VALVES
2" and above Class 600 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim ENP
(6)
BUTTERFLY VALVES 4" and above Class 600 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP
Notes: Notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 42 of 403
10.2.11 Line Class: 209CS1P
Line Class: 209CS1P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 153.2 139.8 131.4 119.5 109.1 86.3
Item Size Rating Schedule Type Specification Notes
¾" S-160 1" to 18" S-80
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 (4) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N, B16.11
MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97 2½" and under Class 1500 Weldneck RTJ
FLANGES 3" and above Class 900 Weldneck RTJ
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20
1½" and under Class 1500 Socketweld A105N body, WB, OS&Y, graphite packing, API 602, Trim No.8
(6)
2” to 2½" Class 1500 RTJ Flanged A216-WCB, PSB, OS&Y, graphite packing, API 600, Trim No. 8 GATE VALVES
3" and above Class 900 RTJ Flanged A216-WCB, BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 1500 Socketweld A105N body, WB, OS&Y, graphite packing, Trim No. 8
(6)
2” to 2½" Class 1500 RTJ Flanged A216-WCB body, PSB, OS&Y, graphite packing, Trim No. 8 GLOBE VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 1500 Socketweld A105N body, WC, Trim No. 1 (6) 2” to 2½" Class 1500 RTJ Flanged A216-WCB body, PSB, Trim No. 1 CHECK VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 1500 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
2” to 2½" Class 1500 3" to 4" Class 900
RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 900 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP
(6) (7)
1½" and under Class 1500 Socketweld A105N body, lubricated, inverted pressure balanced, WC Trim ENP
(6)
2” to 2½" Class 1500 PLUG VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, lubricat., inverted
press. balanced, API 599,Trim ENP (6)
BUTTERFLY VALVES 4" and above Class 900 RTJ Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B, Trim ENP
Notes: Notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 43 of 403
10.2.12 Line Class: 209CS2P
Line Class: 209CS2P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 153.2 139.8 131.4 119.5 109.1 86.3
Item Size Rating Schedule Type Specification Notes
¾" S_XXS 1" to 2" S-160 3" to 18” S-80
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N, B16.11
MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97 2½" and under Class 1500 Weldneck RTJ
FLANGES 3" and above Class 900 Weldneck RTJ
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Soft Iron Octagonal Ring
1½" and under Class 1500 Socketweld A105N body, WB, OS&Y, graphite packing, API 602, Trim No.8
(6)
2” to 2½" Class 1500 RTJ Flanged A216-WCB, PSB, OS&Y, graphite packing, API 600, Trim No. 8 GATE VALVES
3" and above Class 900 RTJ Flanged A216-WCB, BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 1500 Socketweld A105N body, WB, OS&Y, graphite packing, Trim No. 8
(6)
2” to 2½" Class 1500 RTJ Flanged A216-WCB body, PSB, OS&Y, graphite packing, Trim No. 8 GLOBE VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 1500 Socketweld A105N body, WC, Trim No. 1 (6) 2” to 2½" Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 1 CHECK VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 1500 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2” to 2½" Class 1500 3" to 4" Class 900
RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 900 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP
(6) (7)
1½" and under Class 1500 Socketweld A105N body, lubricated, inverted pressure balanced, WC Trim ENP
(6) 2” to 2½" Class 1500 PLUG VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, lubricated, inverted
press. balanced, API 599, Trim ENP (6)
BUTTERFLY VALVES 4" and above Class 900 RTJ Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B, Trim ENP
Notes: Notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 44 of 403
10.2.13 Line Class: 215CS1P
Line Class: 215CS1P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 255.3 233.0 219.0 199.1 181.8 143.8
Item Size Rating Schedule Type Specification Notes
Up to 6" S-160 8" to 10" S-140 12" to 14” S-160
16” S-140 18” S-160
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½" and under Class acc. to B16.11 Socketweld A105N B16.11 FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N, B16.11
MSS SP 97
Weldolets 2” and above Buttweld A 105N MSS SP 97 FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
1½" and under Class 1500 Socketweld A105N body, OS&Y, WB, graphite packing, API 602, Trim No.8 (6)
GATE VALVES 2" and above Class 1500 RTJ Flanged
A216-WCB body, Wedge type: OS&Y, PSB., graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 1500 Socketweld A105N body, OS&Y, WB, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 8
(6) 1½" and under Class 1500 Socketweld A105N body, WC,Trim No. 1 (6) CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 1 (6)
Notes: Notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 45 of 403
10.2.14 Line Class: 215CS4P
Line Class: 215CS4P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 255.3 233.0 219.0 199.1 181.8 143.8
Item Size Rating
Schedule Type Specification Notes
Up to 2" 3" to 6" 8" to 18”
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above
calculate
Welded API 5L Gr. B (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1½" and above
Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 1” and above Buttweld A 105N MSS SP 97
FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
1½" and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, Wedge type: OS&Y, PSB, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 8
(6) 1½" and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 1 (6) CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 1 (6)
Notes: In addition to Notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 46 of 403
10.2.15 Line Class: 225CS1P
Line Class: 225CS1P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 425.5 388.3 365.0 331.8 303.1 239.7
Item Size Rating
Schedule Type Specification Notes
Up to 4" S-160 Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
6” and above calculate Welded API 5L Gr. B (3) FITTINGS El's Tees,
Reducers, Caps, etc.
All
Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 3/4” and above Buttweld A 105N MSS SP 97
FLANGES All Class 2500 Weldneck RTJ A350 LF2, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
2" and under Class 2500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2½" and above Class 2500 RTJ Flanged A216-WCB body, Wedge type: OS&Y, PSB, graphite packing, API 600, Trim No. 8
(6)
2" and under Class 2500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 8
(6) GLOBE VALVES
2½" and above Class 2500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 8
(6) 2" and under Class 2500 RTJ Flanged A105N body, WC, Trim No. 1 (6) CHECK VALVES 2½" and above Class 2500 RTJ Flanged A216-WCB body, PSC, Trim No. 1 (6)
Notes: Notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 47 of 403
10.2.16 Line Class: 225CS4P
Line Class: 225CS4P Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 425.5 388.3 365.0 331.8 303.1 239.7
Item Size Rating
Schedule Type Specification Notes
Up to 2" 3" to 6" 8" to 18”
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above
calculate
Welded API 5L Gr. B (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1½" and above
Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 1½” and above Buttweld A 105N MSS SP 97
FLANGES All Class 2500 Weldneck RTJ A350 LF2, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
1½" and under Class 2500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 2500 RTJ Flanged A216-WCB body, Wedge type: OS&Y, PSB, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 2500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 8
(6) 1½" and under Class 2500 RTJ Flanged A105N body, WC, Trim No. 1 (6) CHECK VALVES 2" and above Class 2500 RTJ Flanged A216-WCB body, PSC, Trim No. 1 (6)
Notes: Notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 48 of 403
10.2.17 Line Class: 101CS1P1
Line Class: 101CS1P1 Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
¾” Sch 160 1” to 2” Sch 80
3” to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B PIPE
20” and above calculate Welded API 5L Gr. B
(1) (2) (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2” and above Buttweld A 105N MSS SP 97
1½” and under Class 150 Socketweld RF FLANGES
2” and above Class 150 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 10 (6)
CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim 10
(6) (7)
1½” and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC, Trim 316
(6) PLUG VALVES
2” and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim 316
(6)
BUTTERFLY VALVES 4” and above Class 150 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim 316
Notes: Notes (1) through (10) of 10.2.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 49 of 403
10.2.18 Line Class: 101CS2P1
Line Class: 101CS2P1 Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2” and above Buttweld A 105N MSS SP 97
1½” and under Class 150 Socketweld RF FLANGES
2” and above Class 150 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6) GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 10 (6)
CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim 10
(6) (7)
1½” and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC, Trim 10
(6) PLUG VALVES
2” and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim 316
(6)
BUTTERFLY VALVES 4” and above Class 150 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim 316
Notes:c Notes (1) through (10) of 10.2.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 50 of 403
10.2.19 Line Class: 101CS3P1
Line Class: 101CS3P1 Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2” and above Buttweld A 105N MSS SP 97
1½” and under Class 150 Socketweld RF FLANGES
2” and above Class 150 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6) GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 10 (6)
CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim 10
(6) (7)
1½” and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC, Trim 10
(6) PLUG VALVES
2” and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim 316
(6)
BUTTERFLY VALVES 4” and above Class 150 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim 316
Notes:c Notes (1) through (10) of 10.2.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 51 of 403
10.2.20 Line Class: 103CS2P1
Line Class: 103CS2P1 Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless
A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 300 Socketweld RF FLANGES
2" and above Class 300 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 300 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim 10
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC Trim 316
(6) PLUG VALVES
2" and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim 316
(6)
BUTTERFLY VALVES 4" and above Class 300 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim 316
Notes: Notes (1) through (10) of 10.2.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 52 of 403
10.2.21 Line Class: 103CS3P1
Line Class: 103CS3P1 Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-60
12” to 14” S-XS 16” to 18” S-60
Seamless
A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97 1½" and under Class 300 Socketwld RF FLANGES 2" and above Class 300 Weldneck RF
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim 10
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A105N body, lubricated, inverted pressure balanced, BC Trim 316
(6) PLUG VALVES
2" and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim 316
(6)
BUTTERFLY VALVES 4" and above Class 300 Lugged or RF
Flanged A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim 316
Notes: Notes (1) through (10) of 10.2.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 53 of 403
10.2.22 Line Class: 215CS2P1
Line Class: 215CS2P1 Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 255.3 233.0 219.0 199.1 181.8 143.8
Item Size Rating Schedule Type Specification Notes
Up to 18" S-160 Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½" and under Class acc. to B16.11 Socketweld Buttweld
A105N B16.11 A234-Gr. WPB, B16.9 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N, B16.11
MSS SP 97 (4)
Weldolets 2” and above Buttweld A 105N MSS SP 97 FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
1½" and under Class 1500 Socketweld A105N body, OS&Y, WB, graphite packing, API 602, Trim No.8 (6)
GATE VALVES 2" and above Class 1500 RTJ Flanged
A216-WCB body, Wedge type: OS&Y, PSB., graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 1500 Socketweld A105N body, OS&Y, WB, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 8
(6) 1½" and under Class 1500 Socketweld A105N body, WC,Trim No. 1 (6) CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, PSB, Trim No. 1 (6)
Notes: Notes (1) through (10) of 10.2.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 54 of 403
10.3 HIC Resistant Carbon Steel Line Classes
10.3.1 Line Classes Notes
The following Notes shall apply to all of the carbon steel classes family (101CH1S) and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(5) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(6) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(7) Flanges
Refer to JERES-L-109 for flange material selection.
(8) Piping material shall be furnished in accordance with the requirements of JERES-A-301.
(9) Minimum line size shall be of 1” for line class with 4.5 and 6.0 mm of corrosion allowance
(10) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 55 of 403
10.3.2 Line Class: 101CH1S
Line Class: 101CH1S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29 100 200 260 Pressure Rating (bar) (2) 19.6 17.7 13.8 11.7
Item
Size Rating
Schedule
Type
Specification
Notes ¾" Sch 160
1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20
Seamless
A106 Gr. B (1)
(2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2" and under Seamless A106 Gr. B
Sockolets 1½" and under Socketweld (4) Weldolets 2" and above
Class acc. To MSS SP 97 Buttweld
A105N
1½" and under Class 150 Socketwd RF FLANGES 2" and above Class 150 Weldneck RF
A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12 (5)
GATE VALVES 2" and above Class 150 RF Flanged
A216-WCB body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (5)
CHECK VALVES 2" and above Class 150 RF Flanged A216-WCB body, BC, Trim No.10 (5)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2" to 4" Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½" and under Class 600 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, BC Trim SS 316
(5) PLUG VALVES
2" and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4" and above Class 150 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B, Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 56 of 403
10.3.3 Line Class: 101CH2S
Line Class: 101CH2S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29 100 200 260 Pressure Rating (bar) (2) 19.6 17.7 13.8 11.7
Item
Size
Rating Schedule
Type
Specification
Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B (1)
(2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Socketweld Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld
A105N
1½” and under Class 150 Socketweld RF FLANGES
2” and above Class 150 Weldneck RF A105N, B16.5
(7) BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing,API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No.10 (5)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5)
BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½” and under Class 600 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, BC Trim SS 316
(5)
PLUG VALVES
2” and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 150 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B, Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 57 of 403
10.3.4 Line Class: 101CH3S
Line Class: 101CH3S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 260 Pressure Rating (bar) (2) 19.6 17.7 13.8 11.7
Item Size Rating Schedule Type Specification Notes
1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-40
12” to 16” S-30 18” S-STD
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 where
applicable. (4)
Nipples and Swages 2" and under Seamless A106 Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld
Weldolets 2" and above Buttweld A105N, B16.11
1½" and under Class 150 Socketwd RF
FLANGES 2" and above Class 150 Weldneck RF
A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2" and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ with nipples A105N body, BC,Trim No. 10 (5)
CHECK VALVES 2" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (5)
1½" and under Class 150 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2" to 4" Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½" and under Class 600 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, BC Trim SS 316
(5)
PLUG VALVES
2" and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
Notes: Notes (1) through (10) of 10.15.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 58 of 403
10.3.5 Line Class: 101CH4S Line Class: 101CH4S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29 100 200 260 Pressure Rating (bar) (2) 19.6 17.7 13.8 11.7
Item Size Rating Schedule Type Specification Notes
Up to 2” S-XXS 3” S-160 4” S-120 6” S-80
8” to 10” S-60 12” to 16” S-40
18” S-30
Seamless A106 Gr. B (1) (2)
PIPE
20” and above Calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,
Reducers, Caps, etc.
1” and above Buttweld A234-Gr. WPB, B16.9 (4)
Weldolets 1” and above Buttweld A 105N MSS SP 97
FLANGES 1” and above Class 150 Weldneck RF A 105N MSS SP 97 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5) 1½” and under Class 150 RF Flanged A105N body, BC, Trim No. 10 (5) CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (5) 1½” and under Class 150 RF Flanged A105N body, floating ball, RTFE
seats, Trim No. 10, fire safe (6) (5)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim No. 10
(6) (5)
1½” and under Class 150 RF Flanged A105N body, lubricated, inverted pressure balanced, BC Trim 316
(5) PLUG VALVES
2” and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim 316
(5)
BUTTERFLY VALVES 4” and above Class 150 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim 316
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 59 of 403
10.3.6 Line Class: 103CH1S
Line Class: 103CH1S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 51.1 46.6 43.8 41.5
Item Size Rating Schedule Type Specification Notes
¾” S-160 1” to 2” S-80
3” to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless
A106 Gr. B (1)
(2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Socketweld Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld
A105N, B16.11
1½” and under Class 300 Socketweld RF FLANGES
2” and above Class 300 Weldneck RF A105N, B16.5
(7) BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 300 RF Flanged A216-WCB body,BB, OS&Y, graphite packing,API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples A105N body, BC,Trim No. 10 (5)
CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½” and under Class 600 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, BC,Trim SS 316
(5) PLUG VALVES
2” and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 300 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 60 of 403
10.3.7 Line Class: 103CH2S
Line Class: 103CH2S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 51.1 46.6 43.8 41.5
Item Size Rating Schedule Type Specification Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 18” S-40
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Socketweld Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld
A105N, B16.11
1½” and under Class 300 Socketweld RF
FLANGES 2” and above Class 300 Weldneck RF
A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 800 Socketweld/ with nipples A105N body, BC,Trim No. 10 (5)
CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 300 Socketweld / with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½” and under Class 600 Socketweld/ with nipples
A105N body, lubricated, inverted pressure balanced, BC, Trim SS 316
(5) PLUG VALVES
2” and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 300 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 61 of 403
10.3.8 Line Class: 103CH3S
Line Class: 103CH3S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 51.1 46.6 43.8 41.5
Item Size Rating Schedule Type Specification Notes
1½” S-XXS 2” to 3” S-160 4” to 6” S-80
8” to 10” S-60 12” to 14” S-XS 16” to 18” S-60
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Class acc. To MSS SP 97 Socketweld
Weldolets 2” and above Buttweld A105N
1½” and under Class 300 Socketwd RF
FLANGES 2” and above Class 300 Weldneck RF
A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 800 Socketweld/ with nipples A105N body, BC,Trim No. 10 (5)
CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½” and under Class 600 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, BC, Trim SS 316
(5) PLUG VALVES
2” and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 300 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 62 of 403
10.3.9 Line Class: 103CH4S
Line Class: 103CH4S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 51.1 46.6 43.8 41.5
Item
Size
Rating Schedule
Type
Specification
Notes
Up to 2” S-XXS 3” S-160 4” S-120
6” to 8” S-80 10” to 18” S-60
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,
Reducers, Caps, etc.
1” and above Buttweld A234-Gr. WPB, B16.9 (4)
Weldolets 1” and above Buttweld A 105N MSS SP 97
FLANGES 1” and above Class 300 Weldneck RF A 105N MSS SP 97 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5) 1½” and under Class 300 RF Flanged A105N body, BC, Trim No. 10 (5) CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 300 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim No. 10
(6) (5)
1½” and under Class 300 RF Flanged A105N body, lubricated, inverted pressure balanced, BC Trim 316
(5) PLUG VALVES
2” and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim 316
(5)
BUTTERFLY VALVES 4” and above Class 300 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B, Trim 316
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 63 of 403
10.3.10 Line Class: 106CH1S
Line Class: 106CH1S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 102.1 93.2 87.6 83.0
Item
Size
Rating Schedule
Type
Specification
Notes
¾” S-160 1” to 2” S-80
3” S-40 4” to 18” S-80
Seamless
A106 Gr. B (1)
(2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Socketweld Weldolets 2” and above
Class acc. To MSS-SP97 Buttweld
A105N, MSS-SP97
1½” and under Class 600 Socketweld RF
FLANGES 2” and above Class 600 Weldneck RF
A105N, B16.5
(7) BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 600 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 600 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 600 RF Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 600 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½” and under Class 600 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, BC Trim SS 316
(5)
PLUG VALVES
2” and above Class 600 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 600 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 64 of 403
10.3.11 Line Class: 106CH2S
Line Class: 106CH2S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 102.1 93.2 87.6 83.0
Item
Size
Rating Schedule
Type
Specification
Notes
¾” S-XXS 1” to 2” S-160
3” to 18” S-80
Seamless
A106 Gr. B (1)
(2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Socketweld Weldolets 2” and above
Class acc. To MSS-SP97 Buttweld
A105N MSS-SP97
1½” and under Class 600 Socketweld RF
FLANGES 2” and above Class 600 Weldneck RF
A105N, B16.5
(7) BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts.
GASKE TS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 600 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 600 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 600 RF Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 600 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½” and under Class 600 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, BC Trim SS 316
(5)
PLUG VALVES
2” and above Class 600 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 600 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 65 of 403
10.3.12 Line Class: 106CH4S
Line Class: 106CH4S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 102.1 93.2 87.6 83.0
Item
Size
Rating Schedule
Type
Specification
Notes
Up to 2” S-XXS 3” to 4” S-160 6” to 8” S-120
10” to 18” S-100
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,
Reducers, Caps, etc.
1” and above Buttweld A234-Gr. WPB, B16.9 (4)
Weldolets 1” and above Buttweld A 105N MSS SP 97
FLANGES 1” and above Class 600 Weldneck RF A 105N MSS SP 97 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 600 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 600 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 600 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 600 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5) 1½” and under Class 600 RF Flanged A105N body, BC, Trim No. 10 (5) CHECK VALVES 2” and above Class 600 RF Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 600 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim No. 10
(6) (5)
1½” and under Class 600 RF Flanged A105N body, lubricated, inverted pressure balanced, BC Trim 316
(5) PLUG VALVES
2” and above Class 600 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim 316
(5)
BUTTERFLY VALVES 4” and above Class 600 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim 316
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 66 of 403
10.3.13 Line Class: 203CH2S
Line Class: 203CH2S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rati. Class: 300 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 51.1 46.6 43.8 41.5
Item Size Rating Schedule Type Specification Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 18” S-40
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Socketweld Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld
A105N
1½” and under Class 300 Socketweld RTJ
FLANGES 2” and above Class 300 Weldneck RTJ
A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20 (5)
1½” and under (5) Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above (5) RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under (5) Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above (5) RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under (5) Socketweld/ with nipples A105N body, BC,Trim No. 10 (5)
CHECK VALVES 2” and above (5) RTJ Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 300 Socketweld / with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 300 RTJ Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 300 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½” and under Class 600 Socketweld/ with nipples
A105N body, lubricated, inverted pressure balanced, BC, Trim SS 316
(5) PLUG VALVES
2” and above Class 300 RTJ Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 300 RTJ Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 67 of 403
10.3.14 Line Class: 206CH3S
Line Class: 206CH3S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 600 RTJ B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 102.1 93.2 87.6 83.0
Item
Size
Rating Schedule
Type
Specification
Notes
Up to1½” S-XXS 2” to 4” S-160
6” to 10” S-100 12” to 18” S-80
Seamless
A106 Gr. B (1)
(2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Class acc. To B16.11 Socketweld
Weldolets 2” and above Buttweld A105N, MSS-SP97
1½” and under Class 600 Socketweld RTJ
FLANGES 2” and above Class 600 Weldneck RTJ
A105N, B16.5
(7) BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 600 RTJ Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 600 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 600 RTJ Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 600 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 600 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 600 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½” and under Class 600 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, BC, Trim SS 316
(5) PLUG VALVES
2” and above Class 600 RTJ Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599,Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 600 RTJ Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 68 of 403
10.3.15 Line Class: 209CH1S
Line Class: 209CH1S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 153.2 139.8 131.4 124.5
Item Size Rating Schedule Type Specification Notes
¾” S-160 1” to 18” S-80
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Socketweld A105N Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld A105N, MSS-SP97
2½” and under Class 1500 Weldneck RTJ A105N, B16.5 FLANGES
3” and above Class 900 Weldneck RTJ A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20
1½” and under Class 1500 Socketweld with nipples
A105N body, WB, OS&Y, graphite packing, API 602, Trim No.12
(5)
2” to 2½” Class 1500 RTJ Flanged A216-WCB, PSB, OS&Y, graphite packing, API 600, Trim No. 12 GATE VALVES
3” and above Class 900 RTJ Flanged A216-WCB, BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 1500 Socketweld with nipples
A105N body, WB, OS&Y, graphite packing, Trim No. 12
(5)
2” to 2½” Class 1500 RTJ Flanged A216-WCB body, PSB, OS&Y, graphite packing, Trim No. 12 GLOBE VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 1500 Socketweld with nipples A105N body, WC, Trim No. 10 (5)
2” to 2½” Class 1500 RTJ Flanged A216-WCB body, PSB, Trim No. 10 CHECK VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 1500 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 2½” Class 1500 BALL VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, trunnion mounted,
fire safe, API 6D, Trim No. 10 (6) (5)
1½” and under Class 1500 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, WC, Trim SS 316
(5) 2” to 2½” Class 1500 PLUG VALVES
3” and above Class 900 RTJ Flanged
A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 900 RTJ Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B, Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 69 of 403
10.3.16 Line Class: 209CH2S
Line Class: 209CH2S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 153.2 139.8 131.4 124.5
Item Size Rating Schedule Type Specification Notes
¾” S-XXS 1” to 2” S-160
3” to 18” S-80 Seamless A106 Gr. B (1)
(2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Socketweld A105N, B16.11 Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld A105N, MSS-SP97
2½” and under Class 1500 Weldneck RTJ A105N, B16.5 FLANGES 3” and above Class 900 Weldneck RTJ A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron Octagonal Ring
1½” and under Class 1500 Socketweld with nipples
A105N body, WB, OS&Y, graphite packing, API 602, Trim No.12
(5)
2” to 2½” Class 1500 RTJ Flanged A216-WCB, PSB, OS&Y, graphite packing, API 600, Trim No. 12 GATE VALVES
3” and above Class 900 RTJ Flanged A216-WCB, BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 1500 Socketweld with nipples
A105N body, WB, OS&Y, graphite packing, Trim No. 12
(5)
2” to 2½” Class 1500 RTJ Flanged A216-WCB body, PSB, OS&Y, graphite packing, Trim No. 12 GLOBE VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 1500 Socketweld with nipples A105N body, WC, Trim No. 10 (5)
2” to 2½” Class 1500 RTJ Flanged A216-WCB body, PSB, Trim No. 10 CHECK VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 1500 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 2½” Class 1500 BALL VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, trunnion mounted,
fire safe, API 6D, Trim No. 10 (6) (5)
1½” and under Class 1500 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, WC, Trim SS 316
(5) 2” to 2½” Class 1500 PLUG VALVES
3” and above Class 900 RTJ Flanged
A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 900 RTJ Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B, Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 70 of 403
10.3.17 Line Class: 209CH3S
Line Class: 209CH3S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 153.2 139.8 131.4 124.5
Item Size Rating Schedule Type Specification Notes
1” to 1½” S-XXS 2” to 3” S-160 4” to 6” S-120
8” to 18” S-100
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets 1½” and under Socketweld A105N, B16.11 Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld A105N, MSS-SP97
2½” and under Class 1500 Weldneck RTJ A105N, B16.5 FLANGES 3” and above Class 900 Weldneck RTJ A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20
1½” and under Class 1500 Socketweld with nipples
A105N body, WB, OS&Y, graphite packing, API 602, Trim No.12
(5)
2” to 2½” Class 1500 RTJ Flanged A216-WCB, PSB, OS&Y, graphite packing, API 600, Trim No. 12 GATE VALVES
3” and above Class 900 RTJ Flanged A216-WCB, BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 1500 Socketweld with nipples
A105N body, WB, OS&Y, graphite packing, Trim No. 12
(5)
2” to 2½” Class 1500 RTJ Flanged A216-WCB body, PSB, OS&Y, graphite packing, Trim No. 12 GLOBE VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 1500 Socketweld with nipples A105N body, WC, Trim No. 10 (5)
2” to 2½” Class 1500 RTJ Flanged A216-WCB body, PSB, Trim No. 10 CHECK VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 1500 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 2½” Class 1500 BALL VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, trunnion mounted,
fire safe, API 6D, Trim No. 10 (6) (5)
1½” and under Class 1500 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, WC, Trim SS 316
(5) 2” to 2½” Class 1500 PLUG VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, BC lubricated, inverted pressure balanced,API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4” and above Class 900 RTJ Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B, Trim No. 10
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 71 of 403
10.3.18 Line Class: 215CH1S
Line Class: 215CH1S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 255.3 233.0 219.0 207.6
Item Size Rating Schedule Type Specification Notes
Up to 6” S-160 8” to 10” S-140
12” to 14” S-160 16” S-140 18” S-160
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N B16.11
FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Weldolets 2” and above Buttweld A 105N MSS SP 97
FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.12
(5)
GATE VALVES 2” and above Class 1500 RTJ Flanged
A216-WCB body, Wedge type: OS&Y, Press. Seal., graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, Press. Seal., graphite packing, Trim No. 12
(5) 1½” and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 1500 RTJ Flanged A216-WCB body, Press. Seal., Trim No. 10
(5)
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 72 of 403
10.3.19 Line Class: 215CH2S Line Class: 215CH2S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 255.3 233.0 219.0 207.6
Item Size Rating
Schedule Type Specification Notes
¾ to 1½” S-XXS 2” to 6” S-160
8” S-XXS 10” to 18” S-160
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N B16.11
FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (4)
Weldolets 2” and above Buttweld A 105N MSS SP 97
FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20
1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.12
(5)
GATE VALVES 2” and above Class 1500 RTJ Flanged
A216-WCB body, Wedge type: OS&Y, Press. Seal., graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, Press. Seal., graphite packing, Trim No. 12
(5) 1½” and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 1500 RTJ Flanged A216-WCB body, Press. Seal., Trim
No. 10 (5)
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 73 of 403
10.3.20 Line Class: 215CH4S Line Class: 215CH4S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 255.3 233.0 219.0 207.6
Item Size Rating
Schedule Type Specification Notes
Up to 2” 3” to 6”
8” to 18” Seamless A106 Gr. B (1)
(2) PIPE
20” and above
calculate
Welded A672 Gr. C65 Cl. 42 (3) FITTINGS
El’s Tees,
Reducers, Caps, etc.
1” and above Buttweld A234-Gr. WPB, B16.9 (4)
Weldolets 1” and above Buttweld A105N MSS SP 97
FLANGES 1” and above Class 1500 Weldneck RTJ A105N MSS SP 97 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
1½” and under Class 1500 RTJ Flanged A105N body, WB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 1500 RTJ Flanged A216-WCB body, Wedge type: Press. Seal., OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 1500 RTJ Flanged A105N body, WB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 1500 RTJ Flanged A216-WCB body, Press. Seal., OS&Y, graphite packing, Trim No. 12
(5) 1½” and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 1500 RTJ Flanged A216-WCB body, Press. Seal., Trim No. 10
(5)
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 74 of 403
10.3.21 Line Class: 225CH1S Line Class: 225CH1S Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 425.5 388.3 365.0 346.0
Item Size Rating
Schedule Type Specification Notes
Up to 2” 3” to 6”
8” to 18” Seamless A106 Gr. B (1)
(2) PIPE
20” and above
calculate
Welded A672 Gr. C65 Cl. 42 (3) FITTINGS
El’s Tees,
Reducers, Caps, Couplings etc.
All
Buttweld A234-Gr. WPB, B16.9 (4)
Weldolets 2” and above Buttweld A105N MSS SP 97
FLANGES All Class 2500 Weldneck RTJ A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
1½” and under Class 2500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.12
(5)
GATE VALVES 2” and above Class 2500 RTJ Flanged
A216-WCB body, Wedge type: OS&Y, Press. Seal., graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 2500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 2500 RTJ Flanged A216-WCB body, OS&Y, Press. Seal., graphite packing, Trim No. 12
(5) 1½” and under Class 2500 RTJ Flanged A105N body, WC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 2500 RTJ Flanged A216-WCB body, Press. Seal., Trim No. 10
(5)
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 75 of 403
10.3.22 Line Class: 101CA2S
Line Class: 101CA2S Basic Material: HIC Resist. Low Temperature Carbon Steel Max. Temperature: 260°C Stress Relief: PWHT
Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -45 100 200 260 Pressure Rating (bar) (2) 18.4 17.4 13.8 11.7
Item
Size
Rating Schedule
Type
Specification
Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 10” S-40 12” to 18” S-20
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 42 + S2 (3)
1½” and under Class acc. To B16.11 Socketweld A350 Gr. LF2 CL. 1, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A420 Gr. WPL6, B16.9 (4)
Nipples and Swage 2” and under Seamless A333 Gr. 6 Sockolets 1½” and under Socketweld Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld
A350 Gr. LF2 CL. 1
1½” and under Class 150 Socketweld RF FLANGES
2” and above Class 150 Weldneck RF A350 Gr. LF2 CL. 1, B16.5
(7) BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite packing,API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(5) CHECK VALVES
2” and above Class 150 RF Flanged A352-LCB body, BC, Trim No.10 (5) 1½” and under Class 300 Socketweld
with nipples
A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 150 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5)
BALL VALVES
6” and above Class 150 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½” and under Class 600 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, lubricated, inverted pressure balanced, BC Trim SS 316
(5)
PLUG VALVES
2” and above Class 150 RF Flanged A352-LCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 76 of 403
10.3.23 Line Class: 101CA4S Line Class: 101CA4S Basic Material: HIC Resist. Low
Temp. Carbon Steel Max. Temperature: 260°C Stress Relief: per Code
Service: Sour Flare Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -45 100 200 260 Pressure Rating (bar) (2) 18.4 17.4 13.8 11.7
Item Size Rating Schedule Type Specification Notes
Up to 2” S-XXS 3” S-160 4” S-120 6” S-80
8” to 10” S-60 12” to 16” S-40
18” S-30
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2)
PIPE
20” and above Calculate Welded A671 Gr. CC65 Cl. 12 + S2 (3) FITTINGS El’s Tees,
Reducers, Caps, etc.
1” and above Buttweld A420 Gr. WPL6, B16.9 (4)
Lateral Y Tee Latrolet 1½” and under Socketweld/
Buttweld
A350 Gr. LF2 CL. 1/ A420 Gr. WPL6 Special Items. They shall be
designed on a project basis. FEM (Finite Element Method) analysis
required
(9)
Weldolets 1” and above Buttweld A350 Gr. LF2 CL. 1 MSS SP 97
FLANGES 1” and above Class 150 Weldneck RF A350 Gr. LF2 CL. 1 MSS SP 97 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 150 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5)
GATE VALVES
2” and above Class 150 RF Flanged A352-LCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 150 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 150 RF Flanged A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(5) CHECK VALVES
2” and above Class 150 RF Flanged A352-LCB body, BC, Trim No. 10 (5) 1½” and under Class 150 RF Flanged A350 Gr. LF2 CL. 1 body, floating
ball, RTFE seats, Trim No. 10, fire s. (6) (5)
2” to 4” Class 150 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 150 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D,Trim No. 10
(6) (5)
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 77 of 403
10.3.24 Line Class: 103CA2S
Line Class: 103CA2S Basic Material: HIC Resist. Low Temperature Carbon Steel Max. Temperature: 260°C Stress Relief: PWHT
Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -45 100 200 260 Pressure Rating (bar) (2) 48.0 45.3 42.5 40.4
Item
Size
Rating Schedule
Type
Specification
Notes
¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless
A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 42 + S2 (3)
1½” and under Class acc. To B16.11 Socketweld A350 Gr. LF2 CL. 1, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A420 Gr. WPL6, B16.9 (4)
Nipples and Swage 2” and under Seamless A333 Gr. 6 Sockolets 1½” and under Socketweld Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld
A350 Gr. LF2 CL. 1
1½” and under Class 300 Socketweld RF FLANGES
2” and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.5
(7) BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, graphite packing,API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(5) CHECK VALVES
2” and above Class 300 RF Flanged A352-LCB body, BC, Trim No.10 (5) 1½” and under Class 300 Socketweld
with nipples
A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (5)
2” to 4” Class 300 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5)
BALL VALVES
6” and above Class 300 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (5)
1½” and under Class 600 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, lubricated, inverted pressure balanced, BC Trim SS 316
(5)
PLUG VALVES
2” and above Class 300 RF Flanged A352-LCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 78 of 403
10.3.23 Line Class: 103CA4S Line Class: 103CA4S Basic Material: HIC Resist. Low
Temp. Carbon Steel Max. Temperature: 260°C Stress Relief: per Code
Service: Sour, Sour Flare Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -45 100 200 260 Pressure Rating (bar) (2) 48.0 45.3 42.5 40.4
Item Size Rating Schedule Type Specification Notes
Up to 2" S-XXS 3" S-160 4” S-120
6" to 8” S-80 10” to 18” S-60
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2)
PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2 (3) FITTINGS El’s Tees,
Reducers, Caps, etc.
1” and above Buttweld A420 Gr. WPL6, B16.9 (4)
Lateral Y Tee Latrolet 1½” and under Socketweld/
Buttweld
A350 Gr. LF2 CL. 1/ A420 Gr. WPL6 Special Items. They shall be
designed on a project basis. FEM (Finite Element Method) analysis
required
(9)
Weldolets 1” and above Buttweld A350 Gr. LF2 CL. 1 MSS SP 97
FLANGES 1” and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1 MSS SP 97 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5)
GATE VALVES
2” and above Class 300 RF Flanged A352-LCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½” and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(5) CHECK VALVES
2” and above Class 300 RF Flanged A352-LCB body, BC, Trim No. 10 (5) 1½” and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, floating
ball, RTFE seats, Trim No. 10, fire s. (6) (5)
2” to 4” Class 300 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (5) BALL VALVES
6” and above Class 300 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D,Trim No. 10
(6) (5)
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 79 of 403
10.4 Carbon Steel Amine Services Line Classes
10.4.1 Line Classes Notes
The following Notes shall apply to all of this carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer’s pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance
(10) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 80 of 403
10.4.2 Line Class: 101CS1D
Line Class: 101CS1D Basic Material: C.S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 120 Pressure Rating (bar) (2) 19.6 17.7 16.9
Item Size Rating Schedule Type Specification Notes
¾”” Sch 160 1” to 2””” Sch 80 3” to 10”” S-40
Seamless
A106 Gr. B (1)
(2)
12” to 18” S-20 PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 22 (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2” and above Buttweld
A105N MSS-SP97
1½” and under Class 150 Socketweld RF FLANGES
2” and above Class 150 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (6)
CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted,fire safe, API 6D, Trim No. 10
(6) (7)
Notes: Notes (1) through (10) of 10.4.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 81 of 403
10.4.3 Line Class: 101CS2D
Line Class: 101CS2D Basic Material: C.S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 120 Pressure Rating (bar) (2) 19.6 17.7 16.9
Item Size
Rating Schedule
Type
Specification
Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 10” S-40 12” to 18” S-20
Seamless
A106 Gr. B (1)
(2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 22 (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2” and above Buttweld
A105N MSS-SP97
1½” and under Class 150 Socketweld RF
FLANGES 2” and above Class 150 Weldneck RF
A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6)
GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples
A105N body, BC, Trim No. 10
(6) CHECK VALVES
2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (6) 1½” and under Class 300 Socketweld
with nipples A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted,fire safe, API 6D, Trim No. 10
(6) (7)
Notes: Notes (1) through (10) of 10.4.1 shall apply
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 82 of 403
10.4.4 Line Class: 101CS4D Line Class: 101CS4D Basic Material: C.S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 120 Pressure Rating (bar) (2) 19.6 17.7 16.9
Item Size Rating Schedule Type Specification Notes
Up to 2”” S-XXS 3””” S-160 4” S-120 6” S-80
8” to 10” S-60 12” to 16” S-40
18”” S-30
Seamless A106 Gr. B (1) (2) PIPE
20” and above Calculate Welded A672 Gr. C65 Cl. 22 (3) FITTINGS
El’s Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 1” and above Buttweld A105N, B16.5
FLANGES All Class 150 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 150 RF Flanged A105N body, BC, Trim No. 10 (6) CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½” and under Class 150 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
Notes: Notes (1) through (10) of 10.4.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 83 of 403
10.4.5 Line Class: 103CS1D Line Class: 103CS1D Basic Material: C.S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 120 Pressure Rating (bar) (2) 51.1 46.6 46.0
Item
Size
Rating Schedule
Type
Specification
Notes
¾” Sch 160 1” to 2” Sch 80
3” to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 22 (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El’s Tees,
Reducers, Caps, Couplings etc.
2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2” and above Buttweld
A105N MSS-SP97
1½” and under Class 300 Socketweld RF
FLANGES 2” and above Class 300 Weldneck RF
A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2” and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (6)
CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
Notes: Notes (1) through (10) of 10.4.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 84 of 403
10.4.6 Line Class: 103CS2D Line Class: 103CS2D Basic Material: C.S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 120 Pressure Rating (bar) (2) 51.1 46.6 46.0
Item
Size
Rating Schedule
Type
Specification
Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 18” S-40
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 22 (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El’s Tees,
Reducers, Caps, Couplings etc.
2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2” and above Buttweld
A105N MSS-SP97
1½” and under Class 300 Socketweld RF
FLANGES 2” and above Class 300 Weldneck RF
A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2” and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (6)
CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
Notes: Notes (1) through (10) of 10.4.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 85 of 403
10.4.7 Line Class: 106CS2D
Line Class: 106CS2D Basic Material: C.S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 120 Pressure Rating (bar) (2) 102.1 93.2 92.1
Item
Size Rating
Schedule
Type
Specification
Notes ¾” S-XXS
1” to 2” S-160 3” to 18” S-80
Seamless
A106 Gr. B (1)
(2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 22 (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El’s Tees,
Reducers, Caps, Couplings etc.
2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2” and above Buttweld
A105N MSS-SP97
1½” and under Class 600 Socketweld RF
FLANGES 2” and above Class 600 Weldneck RF
A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2” and above Class 600 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 600 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (6)
CHECK VALVES 2” and above Class 600 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½” and under Class 600 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(7) (6)
2” to 4” Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(7) (6) BALL VALVES
6” and above Class 600 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(7) (6)
Notes: Notes (1) through (10) of 10.4.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 86 of 403
10.4.8 Line Class: 209CS2D Line Class: 209CS2D Basic Material: C.S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 120 Pressure Rating (bar) (2) 153.2 139.8 138.1
Item
Size Rating
Schedule
Type
Specification
Notes ¾” S_XXS
1” to 2” S-160 3” to 18” S-80
Seamless
A106 Gr. B (1)
(2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 22 (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El’s Tees,
Reducers, Caps, Couplings etc.
2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless A106 Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2” and above Buttweld
A105N MSS-SP97
1½” and under Class 900 Socketweld RTJ
FLANGES 2” and above Class 900 Weldneck RTJ
A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Soft Iron Octagonal Ring B16.20
1½” and under Class 1500 Socketweld with nipples
A105N body, WB, OS&Y, graphite packing, API 602, Trim No.12
(6)
2 to 2½” Class 1500 RTJ Flanged A216-WCB, PSB, OS&Y, graphite packing, API 600, Trim No. 12 GATE VALVES
3” and above Class 900 RTJ Flanged A216-WCB, BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 1500 Socketweld with nipples
A105N body, WB, OS&Y, graphite packing, Trim No. 12
(6)
2 to 2½” Class 1500 RTJ Flanged A216-WCB body, PSB, OS&Y, graphite packing, Trim No. 12 GLOBE VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 1500 Socketweld with nipples A105N body, WC, Trim No. 10 (6)
2 to 2½” Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 10 CHECK VALVES
3” and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 10 (6)
1½” and under Class 1500 Socketweld with nipples
A105N body, floating ball, RTFE seats,Trim No. 10, fire safe
(7) (6)
2” to 2½” Class 1500 BALL VALVES
3” and above Class 900 RTJ Flanged A216 Gr. WCB body, BB, trunnion
mounted, trim 10 (7) (6)
Notes: Notes (1) through (10) of 10.4.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 87 of 403
10.4.9 Line Class: 215CS1D Line Class: 215CS1D Basic Material: C. S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 100 120 Pressure Rating (bar) (2) 255.3 233.0 230.2
Item Size Rating Schedule Type Specification Notes
Up to 6” S-160 8” to 10” S-140
12” to 14” S-160 16” S-140 18” S-160
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N B16.11
FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 2” and above Buttweld A 105N MSS SP 97
FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (8)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.12 (6)
GATE VALVES 2” and above Class 1500 RTJ Flanged
A216-WCB body, Wedge type: OS&Y, PSB, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 12
(6) 1½” and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 10 (6) CHECK VALVES 2” and above Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 10 (6)
Notes: Notes (1) through (10) of 10.4.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 88 of 403
10.4.10 Line Class: 215CS2D
Line Class: 215CS2D Basic Material: C. S. Amine Ser. Max. Temperature: 120°C Stress Relief: PWHT Service: Amine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 100 120 Pressure Rating (bar) (2) 255.3 233.0 230.2
Item Size Rating Schedule Type Specification Notes
¾ to 1½” S-XXS 2” to 6” S-160
8” S-XXS 10” to 18” S-160
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½” and under Class acc. To B16.11 Socketweld A105N B16.11
FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 2” and above Buttweld A 105N MSS SP 97
FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (8)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.12
(6)
GATE VALVES 2” and above Class 1500 RTJ Flanged
A216-WCB body, Wedge type: OS&Y, PSB, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, PSB, graphite packing, Trim No. 12
(6) 1½” and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 10 (6) CHECK VALVES 2” and above Class 1500 RTJ Flanged A216-WCB body, PSC, Trim No. 10 (6)
Notes: Notes (1) through (10) of 10.4.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 89 of 403
10.5 Carbon Steel Flare System Services Line Classes
10.5.1 Line Classes Notes
The following Notes shall apply to all of the carbon steel classes family (101CH1F) and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(5) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(6) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(7) Flanges
Refer to JERES-L-109 for flange material selection.
(8) Branch Connections
Branch connections shall be of lateral type (45 degrees inclination) as stipulated by JERES-L-310 and JERES-F-007.
(9) Piping material shall be furnished in accordance with the requirements of JERES-A-301
(10) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 90 of 403
10.5.2 Line Class: 101CH1F
Line Class: 101CH1F Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour Flare Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29 100 200 260 Pressure Rating (bar) (2) 19.6 17.7 13.8 11.7
Item
Size
Rating Schedule
Type
Specification
Notes
¾” Sch 160 1” to 2” Sch 80
3” to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,
Reducers, Caps, Couplings etc.
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (4)
1½” and under Socketweld/ Buttweld
A105N/A234 WPB Special Items. They shall be
designed on a project basis. FEM (Finite Element Method) analysis
required
(8) Lateral Y Tee Latrolet
2” and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swage 2” and under Seamless A106 Gr. B or API 5L Gr. B
Sockolets/ Threadolets 1½” and under Socketweld/
Threaded A105N MSS SP 97 (4)
Weldolets 2” and above
Class acc. To MSS SP97
Buttweld A 105N MSS SP 97
1½” and under Class 150 Socketweld RF A105N, B16.5 FLANGES
2” and above Class 150 Weldneck RF A105N, B16.5 (7) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12 (5)
GATE VALVES 2” and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite
packing,API 600, Trim No. 12 (5)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12 (5)
GLOBE VALVES 2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y,
graphite packing, Trim No. 12 (5)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No.10 (5)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(5) (6)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(5) (6) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(5) (6)
Notes: Notes (1) through (10) of 10.5.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 91 of 403
10.5.3 Line Class: 101CH2F Line Class: 101CH2F Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour Flare Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29 100 200 260 Pressure Rating (bar) (2) 19.6 17.7 13.8 11.7
Item
Size
Rating Schedule
Type
Specification
Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,
Reducers, Caps, Couplings etc.
1½” and under Class acc. To B16.11
Socketweld/ Threaded A105N, B16.11 (4)
1½” and under Socketweld/ Buttweld
A105N/A234 WPB Special Items. They shall be
designed on a project basis. FEM (Finite Element Method) analysis
required
(8) Lateral Y Tee Latrolet
2” and above Buttweld A234-Gr. WPB, B16.9 (8) Nipples and
Swages 2” and under Seamless A106 Gr. B or API 5L Gr. B
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2” and above Buttweld A 105N MSS SP 97
1½” and under Class 150 Socketweld RF A105N, B16.5
FLANGES 2” and above Class 150 Weldneck RF A105N, B16.5
(7) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12 (5)
GATE VALVES 2” and above Class 150 RF Flanged
A216-WCB body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12 (5)
GLOBE VALVES 2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y,
graphite packing, Trim No. 12 (5)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No.10 (5)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(5) (6)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(5) (6) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(5) (6)
Notes: Notes (1) through (10) of 10.5.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 92 of 403
10.5.4 Line Class: 101CH4F Line Class: 101CH4F Basic Material: HIC Resist. C. S. Max. Temperature: 260°C Stress Relief: per Code Service: Sour Flare Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29 100 200 260 Pressure Rating (bar) (2) 19.6 17.7 13.8 11.7
Item Size Rating Schedule Type Specification Notes
Up to 2” S-XXS 3” S-160 4” S-120 6” S-80
8” to 10” S-60 12” to 16” S-40
18” S-30
Seamless A106 Gr. B (1) (2)
PIPE
20” and above Calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,
Reducers, Caps, etc.
1” and above Buttweld A105N, B16.11 (4)
Lateral Y Tee Latrolet 1½” and under Socketweld/
Buttweld
A105N / A234-Gr. WPB, B16.9 Special Items. They shall be
designed on a project basis. FEM (Finite Element Method) analysis
required
(8)
Weldolets 1” and above Buttweld A105N MSS SP 97
FLANGES 1” and above Class 150 Weldneck RF A105N MSS SP 97 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12 (5)
GATE VALVES 2” and above Class 150 RF Flanged
A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 12 (5)
GLOBE VALVES 2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite
packing, Trim No. 12 (5)
1½” and under Class 150 RF Flanged A105N body, BC, Trim No. 10 (5) CHECK VALVES
2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10
1½” and under Class 150 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10, fire s.
(5) (6)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(5) (6) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim No. 10
(5) (6)
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 93 of 403
10.5.5 Line Class: 103CH2F
Line Class: 103CH2F Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour Flare Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 51.1 46.6 43.8 41.5
Item
Size
Rating Schedule
Type
Specification
Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,
Reducers, Caps, Couplings etc.
1½” and under Class acc. To B16.11 Socketweld A105N, B16.11 (4)
1½” and under Socketweld/ Buttweld
A105N/A234 WPB Special Items. They shall be
designed on a project basis. FEM (Finite Element Method) analysis
required
(8) Lateral Y Tee Latrolet
2” and above Buttweld A234-Gr. WPB, B16.9 (5) Nipples and
Swages 2” and under Seamless A106 Gr. B or API 5L Gr. B
Sockolets 1½” and under Class acc. to MSS SP97 Socketweld A105N
MSS SP 97 (4)
Weldolets 2” and above Buttweld A 105N MSS SP 97
1½” and under Class 300 Socketweld RF A105N, B16.5 (7) FLANGES
2” and above Class 300 Weldneck RF A105N, B16.5 (7) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12 (5)
GATE VALVES 2” and above Class 300 RF Flanged
A216-WCB body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12 (5)
GLOBE VALVES 2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y,
graphite packing, Trim No. 12 (5)
1½” and under Class 800 Socketweld with nipples A105N body, BC, Trim No. 10 (5)
CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No.10 (5)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(5) (6)
2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(5) (6) BALL VALVES
6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(5) (6)
Notes: Notes (1) through (10) of 10.5.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 94 of 403
10.5.6 Line Class: 101CA1F
Line Class: 101CA1F Basic Material: HIC Resist. Low Temperature Carbon Steel Max. Temperature: 260°C Stress Relief: PWHT
Service: Sour Flare Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -45 100 200 260 Pressure Rating (bar) (2) 18.4 17.4 13.8 11.7
Item
Size
Rating Schedule
Type
Specification
Notes
¾” Sch 160 1” to 2” Sch 80
3” to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 42 + S2 (3)
1½” and under Class acc. To B16.11 Socketweld A350 Gr. LF2 CL. 1, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A420 Gr. WPL6, B16.9 (4)
Lateral Y Tee Latrolet 1½” and under Socketweld/
Buttweld
A350 Gr. LF2 CL. 1/ A420 Gr. WPL6 Special Items. They shall be
designed on a project basis. FEM (Finite Element Method) analysis
required
(8)
Nipples and Swage 2” and under Seamless A333 Gr. 6 Sockolets 1½” and under Socketweld Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld
A350 Gr. LF2 CL. 1
1½” and under Class 150 Socketwd RF (7) FLANGES 2” and above Class 150 Weldneck RF
A350 Gr. LF2 CL. 1, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite pack., API 602, Trim No.12 (5)
GATE VALVES 2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite
packing,API 600, Trim No. 12 (5)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12 (5)
GLOBE VALVES 2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite
packing, Trim No. 12 (5)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(5) CHECK VALVES
2” and above Class 150 RF Flanged A352-LCB body, BC, Trim No.10 (5)
1½” and under Class 300 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, Trim No.10, fire s.
(5) (6)
2” to 4” Class 150 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(5) (6) BALL VALVES
6” and above Class 150 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(5) (6)
1½” and under Class 600 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, lubricated, inverted press balan.,BC Trim SS 316 (5)
PLUG VALVES 2” and above Class 150 RF Flanged A352-LCB body, BC lubricat, inverted
press. Balanc.,API 599, Trim SS 316 (5)
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 95 of 403
10.5.7 Line Class: 101CA2F
Line Class: 101CA2F Basic Material: HIC Resist. Low Temperature Carbon Steel Max. Temperature: 260°C Stress Relief: PWHT
Service: Sour Flare Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -45 100 200 260 Pressure Rating (bar) (2) 18.4 17.4 13.8 11.7
Item
Size
Rating Schedule
Type
Specification
Notes
¾" S-XXS 1” to 2” S-160 3" to 4” S-80
6" to 10” S-40 12" to 18” S-20
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 42 + S2 (3)
1½” and under Class acc. To B16.11 Socketweld A350 Gr. LF2 CL. 1, B16.11 FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A420 Gr. WPL6, B16.9 (4)
1½” and under Socketweld/ Buttweld
A350 Gr. LF2 CL. 1/ A420 Gr. WPL6 Special Items. They shall be design. on a proj. basis. FEM (Finite Element
Method) analysis required
(8) Lateral Y Tee Latrolet
2” and above Buttweld A420 Gr. WPL6, B16.9 (4) Nipples and Swage 2” and under Seamless A333 Gr. 6
Sockolets 1½” and under Socketweld Weldolets 2” and above
Class acc. To MSS SP 97 Buttweld
A350 Gr. LF2 CL. 1
1½” and under Class 150 Socketwd RF (7) FLANGES 2” and above Class 150 Weldneck RF
A350 Gr. LF2 CL. 1, B16.5 (7)
BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite pack., API 602, Trim No.12 (5)
GATE VALVES 2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite
packing,API 600, Trim No. 12 (5)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12 (5)
GLOBE VALVES 2” and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, graphite
packing, Trim No. 12 (5)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(5) CHECK VALVES
2” and above Class 150 RF Flanged A352-LCB body, BC, Trim No.10 (5)
1½” and under Class 300 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, Trim No.10, fire s.
(5) (6)
2” to 4” Class 150 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(5) (6) BALL VALVES
6” and above Class 150 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(5) (6)
1½” and under Class 600 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, lubricated, inverted press balan.,BC Trim SS 316 (5)
PLUG VALVES 2” and above Class 150 RF Flanged A352-LCB body, BC lubricat, inverted
press. balanc., API 599, Trim SS 316 (5)
Notes: Notes (1) through (10) of 10.5.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 96 of 403
10.5.8 Line Class: 103CA2F
Line Class: 103CA2F Basic Material: HIC Resist. Low Temperature C.S. Max. Temperature: 260°C Stress Relief: PWHT
Service: Sour Flare Code: ASME B31.3 Min. Temperature: -45.5°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -45.5 100 200 260 Pressure Rating (bar) (2) 48.0 45.3 42.5 40.2
Item
Size
Rating Schedule
Type
Specification
Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 10” S-40 12” to 18” S-20
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 42 + S2 (3) FITTINGS El’s Tees,
Reducers, Caps, Couplings etc.
1½” and under Class acc. To B16.11 Socketweld A350 Gr. LF2 CL. 1, B16.11 (4)
1½” and under Socketweld/ Buttweld
A350 Gr. LF2 CL. 1/ A420 Gr. WPL6, B16.11. Special Items. They shall be
designed on a project basis. FEM (Finite Element Method) analysis
required
(8) Lateral Y Tee Latrolet
2” and above Buttweld A420 Gr. WPL6, B16.9 (4) Nipples and
Swages 2” and under Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
Sockolets 1½” and under Class acc. to MSS SP97 Socketweld A350 Gr. LF2 CL. 1
MSS SP 97 (4)
Weldolets 2” and above Buttweld A350 Gr. LF2 CL. 1 MSS SP 97
1½” and under Class 300 Socketweld RF A350 Gr. LF2 CL. 1, B16.5 (7) FLANGES
2” and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.5 (7) BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite pack., API 602, Trim No.12 (5)
GATE VALVES 2” and above Class 300 RF Flanged
A352-LCB body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12
(5)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12 (5)
GLOBE VALVES 2” and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, graphite
packing, Trim No. 12 (5)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(5) CHECK VALVES
2” and above Class 300 RF Flanged A352-LCB body, BC, Trim No.10 (5)
1½” and under Class 300 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, floating ball, RTFE seats, Trim No. 10, fire s.
(5) (6)
2” to 4” Class 300 RF Flanged A352-LCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(5) (6) BALL VALVES
6” and above Class 300 RF Flanged A352-LCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(5) (6)
Notes: Notes (1) through (10) of 10.5.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 97 of 403
10.6 Carbon Steel Boiler Piping Services Line Classes
10.6.1 Line Classes Notes
The following Notes shall apply to all of this carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.1, Table A-1.
(3) Seamless or double-arch-welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 98 of 403
10.6.2 Line Class: 101CS1B
Line Class: 101CS1B Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: ASME B31.1 Code: ASME B31.1 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification
Notes Up to 2” Sch 80 3” to 10” Sch 40 PIPE
12” to 24” 6.35mm as minimum Seamless SA106 Gr. B (1)
(2)
1½” and under Class 3000 Socketweld/ Threaded SA105N, B16.11 (5) FITTINGS
El’s Tees,
Reducers, Caps, Couplings etc.
2” and above Buttweld SA234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Sch 80 Seamless SA106 Gr. B
Sockolets/ Threadolets 1½” and under Class 3000 Socketweld/
Threaded SA105N
MSS SP 97 (4)
Weldolets 2” and above Buttweld SA105N MSS SP 97
1½” and under Class 150 Socketweld RF SA105N, B16.5
FLANGES 2” and above Class 150 Weldneck RF SA105N, B16.5
(8) BOLTING SA193 B7 stud bolts, semi-finished, heavy pattern with SA194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld/ Threaded
SA105N body, BB, OS&Y, graphite packing, API 602, Trim No.8 (6)
GATE VALVES 2” and above Class 150 RF Flanged
SA216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½” and under Class 800 Socketweld/ Threaded
SA105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2” and above Class 150 RF Flanged SA216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½” and under Class 800 Socketweld/ Threaded SA105N body, BC, Trim No. 1 (6)
CHECK VALVES 2” and above Class 150 RF Flanged SA216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (8) of 10.6.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 99 of 403
10.6.3 Line Class: 101CS2B Line Class: 101CS2B Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: ASME B31.1 Code: ASME B31.1 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating
Schedule Type Specification Notes
¾” Sch 160 1” to 2” Sch 80
3” to 10” S-40 PIPE
12” to 24” S-20
Seamless SA106 Gr. B (1) (2)
1½” and under Class acc. To B16.11
Socketweld/ Threaded SA105N, B16.11 (5) FITTINGS
El’s Tees,
Reducers, Caps, Couplings etc.
2” and above Buttweld SA234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless SA106 Gr. B
Sockolets/ Threadolets 1½” and under Class. Acc. To MSS
SP97 Socketweld/
Threaded SA105N
MSS SP 97 (4)
Weldolets 2” and above Buttweld SA105N MSS SP 97
1½” and under Class 150 Socketweld RF SA105N, B16.5
FLANGES 2” and above Class 150 Weldneck RF SA105N, B16.5
(8) BOLTING SA193 B7 stud bolts, semi-finished, heavy pattern with SA194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld/ Threaded
SA105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2” and above Class 150 RF Flanged SA216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½” and under Class 800 Socketweld/ Threaded
SA105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2” and above Class 150 RF Flanged SA216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½” and under Class 800 Socketweld/ Threaded SA105N body, BC, Trim No. 1 (6)
CHECK VALVES 2” and above Class 150 RF Flanged SA216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (8) of 10.6.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 100 of 403
10.6.4 Line Class: 103CS2B Line Class: 103CS2B Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: ASME B31.1 Code: ASME B31.1 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating
Schedule Type Specification Notes
¾” S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 18” S-40 PIPE
20” and above calculate
Seamless SA106 Gr. B (1) (2)
1½” and under Socketweld/ Threaded SA105N, B16.11 (5) FITTINGS
El’s Tees,
Reducers, Caps, Couplings etc.
2” and above Buttweld SA234-Gr. WPB, B16.9 (5)
Nipples and Swages 2” and under Seamless SA106 Gr. B
Sockolets/ Threadolets 1½” and under Socketweld/
Threaded SA105N
MSS SP 97 (4)
Weldolets 2” and above Buttweld SA 105N MSS SP 97
1½” and under Class 300 Socketweld RF SA105N, B16.5
FLANGES 2” and above Class 300 Weldneck RF SA105N, B16.5
(8) BOLTING SA193 B7 stud bolts, semi-finished, heavy pattern with SA194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld/ Threaded
SA105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2” and above Class 300 RF Flanged SA216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½” and under Class 800 Socketweld/ Threaded
SA105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2” and above Class 300 RF Flanged SA216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½” and under Class 800 Socketweld/ Threaded SA105N body, BC, Trim No. 1 (6)
CHECK VALVES 2” and above Class 300 RF Flanged SA216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (8) of 10.6.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 101 of 403
10.6.5 Line Class: 101CJ1B Line Class: 101CJ1B Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: per Code Service: ASME B31.1 Code: ASME B31.1 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 150 250 350 450 538 Pressure Rating (bar) (2) 19.8 15.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
¾” S-160 1" to 2" S-80 3" to 10” S-40 12” to 18” S-20
PIPE
20” and above calculate
Seamless SA335 Gr. P11 (1) (2)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded SA182 Gr. F11, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld SA234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless SA335 Gr. P11
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded SA182 Gr. F11 Cl. 2,
MSS-SP97 (4)
Weldolets 2" and above Buttweld SA182 Gr. F11 Cl. 2, MSS-SP97
1½" and under Class 150 Socketweld RF SA182 Gr. F11 Cl. 2, B16.5
FLANGES 2" and above Class 150 Weldneck RF SA182 Gr. F11 Cl. 2, B16.5
(8) BOLTING SA193 B16 stud bolts, heavy pattern with SA194 4 heavy hex nuts
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20.
1½" and under Class 800 Socketweld with nipples
SA182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
(6) GATE VALVES
2" and above Class 150 RF Flanged SA217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
(6)
1½" and under Class 150 Socketweld with nipples
SA182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 150 RF Flanged SA217 Gr. WC6, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 800 Socketweld with nipples
SA182 Gr. F11 Cl. 2 body, BC, Trim No. 1
(6) CHECK VALVE
2" and above Class 150 RF Flanged SA217 Gr. WC6 body, BC, Trim No. 1 (6) Notes: Notes (1) through (8) of 10.6.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 102 of 403
10.7 Carbon & Alloy Steel Piping Catalyst & Slurry Services Line Classes
10.7.1 Line Classes Notes
The following Notes shall apply to all of this carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
Piping schedules indicated include corrosion and erosion allowances due to the process catalyst flow.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(4) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(5) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(6) Flanges
Refer to JERES-L-109 for flange material selection.
(7) Rating of flanges shall be in accordance with ASME B16.5 pressure class.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 103 of 403
10.7.2 Line Class: 401CS1E Line Class: 401CS1E Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 CF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A106 Gr. B (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A234-Gr. WPB, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 105N MSS SP 97
FLANGES All Class 150 Compact Flanged Conn
A105N, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 150 Compact Flanged Conn
A216-WCB body, graphite packing, 316 Ball, Metal seats, fire safe (4) (5)
Vee BALL VALVES All Class 150 Compact Flanged Conn
A216-WCB body, graphite packing, 316 (317) Ball, Metal seats, fire safe (4) (5)
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 104 of 403
10.7.3 Line Class: 401CS2E Line Class: 401CS2E Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 CF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A106 Gr. B (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A234-Gr. WPB, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 105N MSS SP 97
FLANGES All Class 150 Compact Flanged Conn
A105N, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 150 Compact Flanged Conn
A216-WCB body, graphite packing, 316 Ball, Metal seats, fire safe (4) (5)
Vee BALL VALVES All Class 150 Compact Flanged Conn
A216-WCB body, graphite packing, 316 (317) Ball, Metal seats, fire safe (4) (5)
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 105 of 403
10.7.4 Line Class: 403CS1E Line Class: 403CS1E Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 CF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A106 Gr. B (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A234-Gr. WPB, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 105N MSS SP 97
FLANGES All Class 300 Compact Flanged Conn
A105N, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 300 Compact Flanged Conn
A216-WCB body, graphite packing, 316 Ball, Metal seats, fire safe (4) (5)
Vee BALL VALVES All Class 300 Compact Flanged Conn
A216-WCB body, graphite packing, 316 (317) Ball, Metal seats, fire safe (4) (5)
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 106 of 403
10.7.5 Line Class: 403CS2E Line Class: 403CS2E Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 CF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A106 Gr. B (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A234-Gr. WPB, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 105N MSS SP 97
FLANGES All Class 300 Compact Flanged Conn
A105N, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 300 Compact Flanged Conn
A216-WCB body, graphite packing, 316 Ball, Metal seats, fire safe (4) (5)
Vee BALL VALVES All Class 300 Compact Flanged Conn
A216-WCB body, graphite packing, 316 (317) Ball, Metal seats, fire safe (4) (5)
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 107 of 403
10.7.6 Line Class: 406CS2E Line Class: 406CS2E Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 CF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 102.1 93.2 87.6 79.6 72.7 57.5
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A106 Gr. B (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A234-Gr. WPB, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 105N MSS SP 97
FLANGES All Class 600 Compact Flanged Conn
A105N, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 600 Compact Flanged Conn
A216-WCB body, graphite packing, 316 Ball, Metal seats, fire safe (4) (5)
Vee BALL VALVES All Class 600 Compact Flanged Conn
A216-WCB body, graphite packing, 316 (317) Ball, Metal seats, fire safe (4) (5)
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 108 of 403
10.7.7 Line Class: 403CJ2E Line Class: 403CJ2E Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 CF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.0 42.9 36.5 25.7 7.2
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A335 Gr. P11 (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A234-Gr. WP11, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 182 Gr. F11 Cl. 2 MSS SP 97
FLANGES All Class 300 Compact Flanged Conn
A 182 Gr. F11 Cl. 2, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 300 Compact Flanged Conn
A 182 Gr. F11 Cl. 2/A217-WC6 body, graphite packing, 316 Ball, Metal seats, fire safe
(4) (5)
Vee BALL VALVES All Class 300 Compact Flanged Conn
A 182 Gr. F11 Cl. 2/A217-WC6 body, graphite packing, 316 (317) Ball, Metal seats, fire safe
(4) (5)
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 109 of 403
10.7.8 Line Class: 401CL2E Line Class: 401CL2E Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 CF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 150 250 350 450 538 Pressure Rating (bar) (2) 20.0 15.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A335 Gr. P5 (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A234-Gr. WP5, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 182 Gr. F5 MSS SP 97
FLANGES All Class 150 Compact Flanged Conn
A 182 Gr. F5, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 150 Compact Flanged Conn
A 182 Gr. F5/A217-C5 body, graphite packing, 316 Ball, Metal seats, fire safe
(4) (5)
Vee BALL VALVES All Class 150 Compact Flanged Conn
A 182 Gr. F5/A217-C5 body, graphite packing, 316 (317) Ball, Metal seats, fire safe
(4) (5)
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 110 of 403
10.7.9 Line Class: 403CL2E Line Class: 403CL2E Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 CF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 51.7 46.3 40.3 33.7 12.0 7.3
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A335 Gr. P5 (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A234-Gr. WP5, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 182 Gr. F5 MSS SP 97
FLANGES All Class 300 Compact Flanged Conn
A 182 Gr. F5, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 300 Compact Flanged Conn
A 182 Gr. F5/A217-C5 body, graphite packing, 316 Ball, Metal seats, fire safe
(4) (5)
Vee BALL VALVES All Class 300 Compact Flanged Conn
A 182 Gr. F5/A217-C5 body, graphite packing, 316 (317) Ball, Metal seats, fire safe
(4) (5)
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 111 of 403
10.7.10 Line Class: 406CL2E Line Class: 406CL2E Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 CF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 103.4 92.7 80.4 67.7 24.1 14.6
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A335 Gr. P5 (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A234-Gr. WP5, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 182 Gr. F5 MSS SP 97
FLANGES All Class 600 Compact Flanged Conn
A 182 Gr. F5, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 600 Compact Flanged Conn
A 182 Gr. F5/A217-C5 body, graphite packing, 316 Ball, Metal seats, fire safe
(4) (5)
Vee BALL VALVES All Class 600 Compact Flanged Conn
A 182 Gr. F5/A217-C5 body, graphite packing, 316 (317) Ball, Metal seats, fire safe
(4) (5)
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 112 of 403
10.7.11 Line Class: 403SC0E Line Class: 403SC0E Basic Material: SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 CF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A312 Gr. TP 304H (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A403-Gr. WP304H, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 182 Gr. F304H MSS SP 97
FLANGES All Class 300 Compact Flanged Conn
A 182 Gr. F304H, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 300 Compact Flanged Conn
A 182 Gr. F304H /A351 Gr.CF8-body, graphite packing, 316 Ball, Metal seats, fire safe, carbon content 0.04% as minimum
(4) (5)
Vee BALL VALVES All Class 300 Compact Flanged Conn
A 182 Gr. F304H /A351 Gr.CF8- body, graphite packing, 316 (317) Ball, Metal seats, fire safe, carbon content 0.04% as minimum
(4) (5)
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 113 of 403
10.7.12 Line Class: 403SC1E Line Class: 403SC1E Basic Material: SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Catalyst & Slurry Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 CF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Item Size Rating Schedule Type Specification Notes
PIPE Up to 10” S-XXS Seamless A312 Gr. TP 304H (1) (2)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
2” and above S-XXS Buttweld A403-Gr. WP304H, B16.9 (3)
Weldolets 2” and above S-XXS Buttweld A 182 Gr. F304H MSS SP 97
FLANGES All Class 300 Compact Flanged Conn
A 182 Gr. F304H, B16.5, Norsok Std or equivalent (6)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Stainless steel metallic seal ring manufacturer standard
BALL VALVES All Class 300 Compact Flanged Conn
A 182 Gr. F304H /A351 Gr.CF8-body, graphite packing, 316 Ball, Metal seats, fire safe, carbon content 0.04% as minimum
(4) (5)
Vee BALL VALVES All Class 300 Compact Flanged Conn
A 182 Gr. F304H /A351 Gr.CF8- body, graphite packing, 316 (317) Ball, Metal seats, fire safe, carbon content 0.04% as minimum
(4) (5
Notes: Notes (1) through (7) of 10.7.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 114 of 403
10.8 Carbon Steel Caustic Services Line Classes
10.8.1 Line Classes Notes
The following Notes shall apply to all of this carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with NACE RP0403.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 115 of 403
10.8.2 Line Class: 101CS1C
Line Class: 101CS1C Basic Material: C.S. Caustic Max. Temperature: 76°C Stress Relief: PWHT Service: Caustic 50% max Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 76 Pressure Rating (bar) (2) 19.6 18.4
Item Size Rating Schedule Type Specification Notes
¾" Sch160 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 22 (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5 FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A105N MSS-SP97
1½" and under Class 150 Socketweld RF A105N, B16.5
FLANGES 2" and above Class 150 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES
2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, PTFE packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld with nipples
A105N body, BC, PTFE gasket, trim NO. 9 CHECK VALVES
2" and above Class 150 RF Flanged A216-WCB body, BC, PTFE gasket, Trim NO. 9
(6)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, PTFE packing, API 602, Trim NO. 9
(6) GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y,PTFE packing,API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A105N body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 150 RF Flanged A216-WCB body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (8) of 10.8.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 116 of 403
10.8.3 Line Class: 101CS2C
Line Class: 101CS2C Basic Material: C.S. Caustic Max. Temperature: 76°C Stress Relief: PWHT Service: Caustic 50% max Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 76 Pressure Rating (bar) (2) 19.6 18.4
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3" to 4” S-80
6" to 10” S-40 12" to 18” S-20
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 22 (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5 FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A105N MSS-SP97
1½" and under Class 150 Socketweld RF A105N, B16.5
FLANGES 2" and above Class 150 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES
2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, PTFE packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld with nipples
A105N body, BC, PTFE gasket, trim NO. 9 CHECK VALVES
2" and above Class 150 RF Flanged A216-WCB body, BC, PTFE gasket, Trim NO. 9
(6)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, PTFE packing, API 602, Trim NO. 9
(6) GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y,PTFE packing,API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A105N body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 150 RF Flanged A216-WCB body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (8) of 10.8.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 117 of 403
10.8.4 Line Class: 103CS1C
Line Class: 103CS1C Basic Material: C.S. Caustic Max. Temperature: 76°C Stress Relief: PWHT Service: Caustic 50% max Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 76 Pressure Rating (bar) (2) 51.1 48.3
Item Size Rating Schedule Type Specification Notes
¾" Sch 160 1" to 2" Sch 80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 22 (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5 FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A105N MSS-SP97
1½" and under Class 300 Socketweld RF A105N, B16.5 FLANGES
2" and above Class 300 Weldneck RF A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, PTFE packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld with nipples
A105N body, BC, PTFE gasket, trim NO. 9 CHECK VALVES
2" and above Class 300 RF Flanged A216-WCB body, BC, PTFE gasket, Trim NO. 9
(6)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, PTFE packing, API 602, Trim NO. 9
(6) GATE VALVES
2” and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y,PTFE packing,API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A105N body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 300 RF Flanged A216-WCB body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (8) of 10.8.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 118 of 403
10.8.5 Line Class: 103CS2C
Line Class: 103CS2C Basic Material: C.S. Caustic Max. Temperature: 76°C Stress Relief: PWHT Service: Caustic 50% max Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 76 Pressure Rating (bar) (2) 51.1 48.3
Item Size Rating
Schedule Type Specification Notes
¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate welded A672 Gr. C65 Cl. 22 (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5 FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A105N MSS-SP97
1½" and under Class 300 Socketweld RF A105N, B16.5 FLANGES
2" and above Class 300 Weldneck RF A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim NO. 9 GLOBE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld with nipples A105N body, BC, Trim NO. 9 CHECK VALVES
2" and above Class 300 RF Flanged A216-WCB body, BC, Trim NO. 9 (6)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, PTFE packing, API 602, Trim NO. 9
(6) GATE VALVES
2” and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y,PTFE packing,API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A105N body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 300 RF Flanged A216-WCB body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (8) of 10.8.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 119 of 403
10.8.6 Line Class: 101CA2C
Line Class: 101CA2C Base Material: Low Temp C.S. Caustic Max. Temperature: 76°C Stress Relief: PWHT
Service: Caustic 50% max Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -45 76 Pressure Rating (bar) (2) 18.4 17.8
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3" to 4” S-80
6" to 10” S-40 12" to 18” S-20
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2 (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (5 FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A420 Gr. WPL6, B16.9 (5)
Nipples and Swages 2" and under Seamless A333 Gr. 6 or
API 5L Gr. B + Impact Test at -45°C
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A350 Gr. LF2 CL. 1, MSS SP 97
1½" and under Class 150 Socketweld RF A350 Gr. LF2 CL. 1, B16.5 FLANGES
2" and above Class 150 Weldneck RF A350 Gr. LF2 CL. 1, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES
2" and above Class 150 RF Flanged A352-LCB body, BB, OS&Y, PTFE packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BC, PTFE gasket, trim NO. 9 CHECK VALVES
2" and above Class 150 RF Flanged A352-LCB body, BC, PTFE packing, Trim NO. 9
(6)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, PTFE gasket, API 602, Trim NO. 9
(6) GATE VALVES
2” and above Class 150 RF Flanged A352-LCB body, Wedge type: BB, OS&Y,PTFE packing,API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 150 RF Flanged A352-LCB body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (8) of 10.8.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 120 of 403
10.8.7 Line Class: 103CA2C
Line Class: 103CA2C Base Material: Low Temp C.S. Caustic Max. Temperature: 76°C Stress Relief: PWHT
Service: Caustic 50% max Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -45 76 Pressure Rating (bar) (2) 48.0 46.4
Item Size Rating
Schedule Type Specification Notes
¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2 (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A350 Gr. LF2 CL. 1, B16.11 (5 FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A420 Gr. WPL6, B16.9 (5)
Nipples and Swages 2" and under Seamless A333 Gr. 6 or
API 5L Gr. B + Impact Test at -45°C
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A350 Gr. LF2 CL. 1, MSS SP 97
1½" and under Class 300 Socketweld RF A350 Gr. LF2 CL. 1, B16.5 FLANGES
2" and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES
2" and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, PTFE packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BC, PTFE gasket, trim NO. 9 CHECK VALVES
2" and above Class 300 RF Flanged A352-LCB body, BC, PTFE gasket, Trim NO. 9
(6)
1½” and under Class 800 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, BB, OS&Y, PTFE packing, API 602, Trim NO. 9
(6) GATE VALVES
2” and above Class 300 RF Flanged A352-LCB body, Wedge type: BB, OS&Y,PTFE packing,API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A350 Gr. LF2 CL. 1 body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 300 RF Flanged A352-LCB body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (8) of 10.8.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 121 of 403
10.9 Carbon Steel for Sulfuric Acid Services Line Classes
10.9.1 Line Classes Notes
The following Notes shall apply to all of this carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 122 of 403
10.9.2 Line Class: 101CS2A
Line Class: 101CS2A Base Material: Carbon Steel Max. Temperature: 80°C Stress Relief: per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 80 Pressure Rating (bar) (2) 17.2 14.1
Item Size Rating
Schedule Type Specification Notes
2" to 3" Sch 160 4" to 6” Sch 80 PIPE 8” to 12” Sch 40
Seamless A106 Gr. B (1) (2)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc.
All Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 2" and above Buttweld A105N MSS-SP97 FLANGES All Class 150 Weldneck RF A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21
GATE VALVE 2" and under Class 150 RF Flanged A351 CN7M, BB, OS&Y, Trim 316, PTFE Gask&Pack (6)
GLOBE VALVES All Class 150 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13
(6)
CHECK VALVES All Class 150 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask
(6)
PLUG VALVES All Class 150 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
Notes: Notes (1) through (8) of 10.9.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 123 of 403
10.9.3 Line Class: 101CS3A
Line Class: 101CS3A Base Material: Carbon Steel Max. Temperature: 80°C Stress Relief: per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 80 Pressure Rating (bar) (2) 17.2 14.1
Item Size Rating Schedule Type Specification Notes
2" to 3" S-XXS 4" to 6” S-160 8” to 10” S-80
PIPE
12” to 14” S-60
Seamless A106 Gr. B (1) (2)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc.
All Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 2" and above Buttweld A105N MSS-SP97
FLANGES All Class 150 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21
GATE VALVE 2" and under Class 150 RF Flanged A351 CN7M, BB, OS&Y, Trim 316, PTFE Gask&Pack
(6)
GLOBE VALVES All Class 150 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13
(6)
CHECK VALVES All Class 150 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask
(6)
PLUG VALVES All Class 150 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
Notes: Notes (1) through (8) of 10.9.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 124 of 403
10.9.4 Line Class: 103CS2A
Line Class: 103CS2A Base Material: Carbon Steel Max. Temperature: 80°C Stress Relief: per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 80 Pressure Rating (bar) (2) 40.0 36.9
Item Size Rating Schedule Type Specification Notes
2" S-XXS 3" to 4” S-160 PIPE 6” to 18” S-80
Seamless A106 Gr. B (1) (2)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc.
All Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 2" and above Buttweld A105N MSS-SP97 FLANGES All Class 300 Weldneck RF A105N, B16.5 (8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21
GATE VALVE 2" and under Class 300 RF Flanged A351 CN7M, BB, OS&Y, Trim 316, PTFE Gask&Pack
(6)
GLOBE VALVES All Class 300 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13
(6)
CHECK VALVES All Class 300 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask
(6)
PLUG VALVES All Class 300 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
Notes: Notes (1) through (8) of 10.9.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 125 of 403
10.9.5 Line Class: 103CS3A
Line Class: 103CS3A Base Material: Carbon Steel Max. Temperature: 80°C Stress Relief: per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 80 Pressure Rating (bar) (2) 40.0 36.9
Item Size Rating Schedule Type Specification Notes
1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-60
12” to 14” S-XS
PIPE
16” to 18” S-60
Seamless A106 Gr. B (1) (2)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc.
All Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 2" and above Buttweld A105N MSS-SP97
FLANGES All Class 300 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21
GATE VALVE 2" and under Class 300 RF Flanged A351 CN7M, BB, OS&Y, Trim 316, PTFE Gask&Pack
(6)
GLOBE VALVES All Class 300 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13
(6)
CHECK VALVES All Class 300 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask
(6)
PLUG VALVES All Class 300 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
Notes: Notes (1) through (8) of 10.9.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 126 of 403
10.10 Carbon Steel for Hydrogen Services Line Classes
10.10.1 Line Classes Notes
The following Notes shall apply to all of the carbon steel classes family (101CS1H) and shall be considered as an integral part of the individual line class.
Notes:
(1) Material and Corrosion Allowance:
All carbon steel piping shall be killed carbon steel.
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) For hydrogen service, refer to API-941 for temperature limits of material at applicable hydrogen partial pressure. Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Threaded and socket welded connections are not allowed.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
Threaded connections only allowed downstream of vents, drains, hydrotest connections, and instrument take-offs. Threaded O'lets only allowed for thermowell and hydrotest connections.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
Flange connections shall be avoided as possible and replaced with buttwelded connections
(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 127 of 403
10.10.2 Line Class: 101CS1H
Line Class: 101CS1H Basic Material: C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29 100 200 232 Pressure Rating (bar) (2) 19.6 17.7 13.8 12.7
Item Size Rating Schedule Type Specification
Notes 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 2" and above Buttweld A105N, B16.5
FLANGES All Class 150 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8 (6)
GATE VALVES 2" and above Class 150 RF Flanged
A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 1½" and under Class 150 RF Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 128 of 403
10.10.3 Line Class: 101CS2H
Line Class: 101CS2H Basic Material: C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29 100 200 232 Pressure Rating (bar) (2) 19.6 17.7 13.8 12.7
Item Size Rating Schedule Type Specification
Notes 1” to 2” S-160 3" to 4” S-80
6" to 10” S-40 12" to 18” S-20
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 2" and above Buttweld A105N, B16.5
FLANGES All Class 150 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 1½" and under Class 150 RF Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 129 of 403
10.10.4 Line Class: 103CS1H
Line Class: 103CS1H Basic Material: C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 232 Pressure Rating (bar) (2) 51.1 46.6 43.8 42.6
Item Size Rating Schedule Type Specification
Notes 1" to 2" Sch 80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 300 Weldneck RF A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 1½" and under Class 300 RF Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 130 of 403
10.10.5 Line Class: 103CS2H
Line Class: 103CS2H Basic Material: C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 232 Pressure Rating (bar) (2) 51.1 46.6 43.8 42.6
Item Size Rating Schedule Type Specification
Notes 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 300 Weldneck RF A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 1½" and under Class 300 RF Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 131 of 403
10.10.6 Line Class: 103CS4H
Line Class: 103CS4H Basic Material: C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 232 Pressure Rating (bar) (2) 51.1 46.6 43.8 42.6
Item Size Rating Schedule Type Specification Notes
1" to 18” Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate
Eelded A672 Gr. C65 Cl. 32 (3) FITTINGS El's Tees,
Reducers, Caps, Couplings etc.
All Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES All Class 300 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 1½" and under Class 300 RF Flanged A105N body, BC,Trim No. 1 (6) CHECK VALVES 2" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 132 of 403
10.10.7 Line Class: 106CS1H
Line Class: 106CS1H Basic Material: H2 Serv. C.S. Max. Temperature: 232°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 232 Pressure Rating (bar) (2) 102.1 93.2 87.6 85.2
Item Size Rating Schedule Type Specification
Notes 1" to 2" S-80
3" S-40 4” to 18” S-80
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 600 Weldneck RF A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 600 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 600 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 600 RF Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 1½" and under Class 600 RF Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 600 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 133 of 403
10.10.8 Line Class: 106CS2H
Line Class: 106CS2H Basic Material: H2 Serv. C.S. Max. Temperature: 232°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 232 Pressure Rating (bar) (2) 102.1 93.2 87.6 85.2
Item Size Rating Schedule Type Specification
Notes 1" to 2" S-160 3” to 18” S-80
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 600 Weldneck RF A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 600 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 600 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 600 RF Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 1½" and under Class 600 RF Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 600 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 134 of 403
10.10.9 Line Class: 206CS1H (to be only applied to hydrocracker)
Line Class: 206CS1H Basic Material: H2 Serv. C.S. Max. Temperature: 425°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 600 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 102.1 93.2 87.6 79.6 72.7 57.5
Item Size Rating Schedule Type Specification
Notes 1" to 2" S-80
3" S-40 4” to 18” S-80
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 600 Weldneck RTJ A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS Soft Iron Octagonal Ring B16.20
1½" and under Class 600 RTJ Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 600 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 600 RTJ Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 600 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 1½" and under Class 600 RTJ Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 600 RTJ Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 135 of 403
10.10.10 Line Class: 209CS1H
Line Class: 209CS1H Basic Material: H2 Serv. C. S. Max. Temperature: 425°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 153.2 139.8 131.4 119.5 109.1 86.3
Item Size Rating Schedule Type Specification
Notes
1" to 18" S-80 Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97 2½" and under Class 1500 FLANGES 3" and above Class 900
Weldneck RTJ A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS Soft Iron Octagonal Ring B16.20
2½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
2½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 2½" and under Class 1500 RTJ Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 3" and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 136 of 403
10.10.11 Line Class: 209CS2H
Line Class: 209CS2H Basic Material: H2 Serv. C. S. Max. Temperature: 425°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 153.2 139.8 131.4 119.5 109.1 86.3
Item Size Rating Schedule Type Specification
Notes
1" to 2" S-160 Seamless A106 Gr. B (1) (2)
3" to 18” S-80 PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97 2½" and under Class 1500 FLANGES 3" and above Class 900
Weldneck RTJ A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS Soft Iron Octagonal Ring B16.20
2½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
2½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 2½" and under Class 1500 RTJ Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 3" and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 137 of 403
10.10.12 Line Class: 215CS1H
Line Class: 215CS1H Basic Material: H2 Serv. C. S. Max. Temperature: 425°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% Xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 255.3 233.0 219.0 199.1 181.8 143.8
Item Size Rating Schedule Type Specification
Notes 1” to 6" S-160
8" to 10" S-140 12" to 14” S-160
16” S-140 18” S-160
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 1500 Weldneck RTJ A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS Soft Iron Octagonal Ring B16.20
1½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 1½" and under Class 1500 RTJ Flanged A105N body, BC, Trim No. 1 (6) CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 138 of 403
10.10.13 Line Class: 103CS3H1 (to be only applied to hydrocracker)
Line Class: 103CS3H1 Basic Material: C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 232 Pressure Rating (bar) (2) 51.1 46.6 43.8 42.6
Item Size Rating Schedule Type Specification
Notes 1½” S-XXS
2" to 3" S-160 4" to 6” S-80 8” to 10” S-60
12” to 14” S-XS 16” to 18” S-60
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 300 Weldneck RF A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6) 1½" and under Class 300 RF Flanged A105N body, BC, Trim No. 10 (6) CHECK VALVES 2" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 139 of 403
10.10.14 Line Class: 203CS2H1 (to be only applied to hydrocracker)
Line Class: 203CS2H1 Basic Material: C. S. H2 serv. Max. Temperature: 425°C Stress Relief: Per Code Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 300 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification
Notes 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 300 Weldneck RTJ A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS Soft Iron Octagonal Ring B16.20
1½" and under Class 300 RTJ Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 300 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 300 RTJ Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6) 1½" and under Class 300 RTJ Flanged A105N body, BC, Trim No. 10 (6) CHECK VALVES 2" and above Class 300 RTJ Flanged A216-WCB body, BC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 140 of 403
10.10.15 Line Class: 206CS3H1 (to be only applied to hydrocracker)
Line Class: 206CS3H1 Basic Material: C. S. H2 serv. Max. Temperature: 425°C Stress Relief: Per Code Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 600 RTJ B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 102.1 93.2 87.6 79.6 72.7 57.5
Item Size Rating Schedule Type Specification
Notes 1½” S-XXS
2" to 3" S-160 4" to 6” S-120 8” to 18” S-100
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 600 Weldneck RTJ A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS Soft Iron Octagonal Ring B16.20
1½" and under Class 600 RTJ Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 600 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 600 RTJ Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 600 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6) 1½" and under Class 600 RTJ Flanged A105N body, BC, Trim No. 10 (6) CHECK VALVES 2" and above Class 600 RTJ Flanged A216-WCB body, BC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 141 of 403
10.10.16 Line Class: 209CS3H1 (to be only applied to hydrocracker)
Line Class: 209CS3H1 Basic Material: C. S. H2 serv. Max. Temperature: 425°C Stress Relief: Per Code Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 153.2 139.8 131.4 119.5 109.1 86.3
Item Size Rating Schedule Type Specification
Notes 1" to 1½” S-XXS 2" to 3” S-160 4” to 18” S-80
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97 2½" and under Class 1500 FLANGES 3" and above Class 900
Weldneck RTJ A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS Soft Iron Octagonal Ring B16.20
2½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
2½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
3" and above Class 900 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6) 2½" and under Class 1500 RTJ Flanged A105N body, BC, Trim No. 10 (6) CHECK VALVES 3" and above Class 900 RTJ Flanged A216-WCB body, BC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 142 of 403
10.10.17 Line Class: 215CS1H1 (to be only applied to hydrocracker)
Line Class: 215CS1H1 Basic Material: C. S. H2 serv. Max. Temperature: 425°C Stress Relief: Per Code Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% Xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 255.3 233.0 219.0 199.1 181.8 143.8
Item Size Rating Schedule Type Specification
Notes 1” to 6" S-160
8" to 10" S-140 12" to 14” S-160
16” S-140 18” S-160
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 1500 Weldneck RTJ A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS Soft Iron Octagonal Ring B16.20
1½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6) 1½" and under Class 1500 RTJ Flanged A105N body, BC, Trim No. 10 (6) CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, BC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 143 of 403
10.10.18 Line Class: 215CS2H1 (to be only applied to hydrocracker)
Line Class: 215CS2H1 Basic Material: C. S. H2 serv. Max. Temperature: 425°C Stress Relief: Per Code Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% Xray
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 255.3 233.0 219.0 199.1 181.8 143.8
Item Size Rating Schedule Type Specification
Notes
Up to 18" S-160 Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets All Buttweld A105N MSS-SP97
FLANGES 1" and above Class 1500 Weldneck RTJ A105N B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts
GASKETS Soft Iron Octagonal Ring B16.20
1½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 1500 RTJ Flanged A105N body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6) 1½" and under Class 1500 RTJ Flanged A105N body, BC, Trim No. 10 (6) CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, BC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 144 of 403
10.11 Carbon Steel for Jacketing Service Line Classes.
10.11.1 Line Classes Notes
The following Notes shall apply to all of the carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) Threaded connections only allowed for caps and plugs.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 145 of 403
10.11.2 Line Class: 101CS1J
Line Class: 101CS1J Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: External Jacketing Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
¾" Sch 160 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B PIPE
20” and above calculate Welded API 5L Gr. B
(1) (2) (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 Fittings BW ends and cut in two halves (5)
Equal cross 2" and above Buttweld A234-Gr. WPB, ASME B16.9, cut in two halves
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
FLANGES 1½" and under Class 150 Socketweld RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
Notes: Notes (1) through (8) of 10.11.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 146 of 403
10.12 Galvanized Carbon Steel Line Classes
10.12.1 Line Classes Notes
The following Notes are on hold (To be confirmed in final version).
The following Notes shall apply to all of this lined carbon steel class family and shall be considered as an integral part of the individual line class.
Notes: (To be confirmed for final revision)
(1) Material and Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
Galvanizing shall be in accordance with JEMS-H-9115.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Seamless or double-arc welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(10) Mechanical Joint
Refer to JERES-L-110 for approved mechanical joint joints such as dresser, positive seal coupling, LokRing type.
(11) Piping shall be hot-dip galvanized after fabrication. Shop fabrication shall be maximized and all flanged spools shall be hot-dip galvanized after fabrication. Valves shall not be galvanized.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 147 of 403
10.12.2 Line Class: 301CG0W
Line Class: 301CG0W Basic Material: Galvan. CS / CS Max. Temperature: 100°C Stress Relief: Not required Service: Water Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 Pressure Rating (bar) (2) 10.3 10.3
Item Size Rating Schedule Type Specification Notes
2" and smaller 80 Smls, threaded API 5L Gr. B Galvanized 3" and 6" 40 Seamless API 5L Gr. B (11) PIPE
8" 0.25 in. min. Seamless API 5L Gr. B (11) NIPPLES 2" and smaller 80 Smls, threaded API 5L Gr. B Galvanized
2" and smaller Class 3000 ASME B16.11 A105N Galvanized THREADED
FITTINGS Swaged Nipples 2" and smaller Sch. 80 Smls, threaded ASTM A53-B Galv./API 5L-B Galv.
Bosses 2" and smaller Class 3000 Welding, threaded female outlet BUTT WELD
FITTINGS 3" - 8" Match pipe ASME B16.9 (11)
2" and smaller Dresser style No. 65-B or eqiuvelent (10) MECHANICAL JOINTS
Water Service only 3" - 8" Dresser style No. 38 (10)
FLANGES 3" and 8" Class 150 FF Weld Neck A105N, B16.5 (8) (11)
Blinds 4" - 8" Class 150 FF A105N, B16.5 Spec. Blinds 4" - 8" Flat Face AD-036631 or AD-036633 GASKETS 4" - 8" 1.6 mm Synthetic fiber
1¼" and smaller Mild steel machine bolts/ square heads and hex nuts to ASTM A307, Grade B
BOLTING 1½" and larger ASTM A193 B7 stud bolts, semi-finished,
heavy pattern ASTM A194 2H hex nuts
2" and smaller Class 800 Socketweld/ Threaded
ASTM A105N body, BB, OS&Y, API 602, Trim No.8
(6) GATE VALVES
3" and larger Class 150 FF Flanged ASTM A216-WCB body, BB, OS&Y, API 600, Trim No.8
(6)
2" and smaller Class 800 Socketweld/ Threaded
ASTM A105N body, BB, OS&Y, Trim No.8
(6) GLOBE VALVES
3" and larger Class 150 FF Flanged ASTM A216-WCB body, BB, OS&Y, Trim No.8
(6)
2" and smaller Class 800 Socketweld/ Threaded ASTM A105N body, BC, Trim No.8 (6)
CHECK VALVES 3" and larger Class 150 FF Flanged ASTM A216-WCB body, BC, Trim No.1 (6)
2" and smaller Class 300 Socketweld/ Threaded
ASTM A105N body, floating ball, RTFE seats, Trim No.10, fire safe
(6) (7)
3" and 4" Class 150 FF Flanged ASTM A216-WCB body, floating ball, RTFE seats, Trim No.10, fire safe
(6) (7) BALL VALVES
6" and larger Class 150 FF Flanged ASTM A216-WCB body, trunnion mounted, Trim ENP, fire safe
(6) (7)
BUTTERFLY VALVES 4" and larger 200 psig Wafer or lug Ductile Iron ASTM A395 body, API 609
Cat.A, Trim ENP
Notes: Notes (1) through (11) of 10.12.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 148 of 403
10.12.3 Line Class: 301CG1P
Line Class: 301CG1P Basic Material: C.S. & Galv. C.S. Max. Temperature: 100°C Stress Relief: Not required Service: Instrument air Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 Pressure Rating (bar) (2) 10.3 10.3
Item Size Rating
Schedule Type Specification Notes
2" and smaller 80 Smls, threaded API 5L Gr. B Galvanized 4" and 6" 40 Seamless API 5L Gr. B (11) PIPE 8" - 24" 0.25 in. min. Seamless API 5L Gr. B (11)
NIPPLES 2" and smaller 40 Smls, threaded API 5L Gr. B Galvanized
2" and smaller Class 3000 ASME B16.11 A105N Galvanized THREADED
FITTINGS Swaged Nipples 2" and smaller Sch. 80 Smls, threaded ASTM A53-B Galv./API 5L-B Galv.
Bosses 2" and smaller Class 3000 Welding, threaded female outlet (AE-036175)
BUTT WELD FITTINGS 3" - 24" Match pipe ASME B16.9 (11)
2" and smaller Dresser style No. 65-B (10) MECHANICAL JOINTS
Water Service only 3" - 24" Dresser style No. 38 (10)
FLANGES 3" - 24" Class 150 FF Weld Neck A105N, B16.5 (8) (11)
Blinds 4" - 24" Class 150 FF A105N, B16.5 Spec. Blinds 4" - 24" Flat Face AD-036631 or AD-036633 GASKETS 4" - 24" 1.6 mm Synthetic fiber
1¼" and smaller Mild steel machine bolts/ square heads and hex nuts to ASTM A307, Grade B
BOLTING 1½" and larger ASTM A193 B7 stud bolts, semi-finished,
heavy pattern ASTM A194 2H hex nuts
2" and smaller Class 800 Socketweld/ Threaded
ASTM A105N body, BB, OS&Y, API 602, Trim No.8
(6) GATE VALVES
3" and larger Class 150 FF Flanged ASTM A216-WCB body, BB, OS&Y, API 600, Trim No.8
(6)
2" and smaller Class 800 Socketweld/ Threaded
ASTM A105N body, BB, OS&Y, Trim No.8
(6) GLOBE VALVES
3" and larger Class 150 FF Flanged ASTM A216-WCB body, BB, OS&Y, Trim No.8
(6)
2" and smaller Class 800 Socketweld/ Threaded ASTM A105N body, BC, Trim No.8 (6)
CHECK VALVES 3" and larger Class 150 FF Flanged ASTM A216-WCB body, BC, Trim No.1 (6)
2" and smaller Class 300 Socketweld/ Threaded
ASTM A105N body, floating ball, RTFE seats, Trim No.10, fire safe
(6) (7)
3" and 4" Class 150 FF Flanged ASTM A216-WCB body, floating ball, RTFE seats, Trim No.10, fire safe
(6) (7) BALL VALVES
6" and larger Class 150 FF Flanged ASTM A216-WCB body, trunnion mounted, Trim ENP, fire safe
(6) (7)
BUTTERFLY VALVES 4" and larger 200 psig Wafer or lug Ductile Iron ASTM A395 body, API 609
Cat.A, Trim ENP
Notes: Notes (1) through (10) of 10.12.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 149 of 403
10.12.4 Line Class: 301CG2P
Line Class: 301CG2P Basic Material: C.S. & Galv. C.S. Max. Temperature: 100°C Stress Relief: Not required Service: Service Air Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 Pressure Rating (bar) (2) 10.3 10.3
Item Size Rating Schedule Type Specification Notes
2" and smaller 80 Smls, threaded API 5L Gr. B Galvanized 4" and 6" 40 Seamless API 5L Gr. B (11) PIPE 8" - 24" 0.25 in. min. Seamless API 5L Gr. B (11)
NIPPLES 2" and smaller 80 Seamless API 5L Gr. B Galvanized
2" and smaller Class 3000 ASME B16.11 A105N Galvanized THREADED
FITTINGS Swaged Nipples 2" and smaller Sch. 80 Seamless ASTM A53-B Galv./API 5L-B Galv.
Bosses 2" and smaller Class 3000 Welding, threaded female outlet (AE-036175)
BUTT WELD FITTINGS 3" - 24" Match pipe ASME B16.9 (11)
2" and smaller Dresser style No. 65-B (11) MECHANICAL JOINTS
Water Service only 3" - 24" Dresser style No. 38 (10)
FLANGES 3" and 6" Class 150 FF Weld Neck A105N, B16.5 (8) (11)
Blinds 4" - 24" Class 150 FF A105N, B16.5 Spec. Blinds 4" - 24" Flat Face AD-036631 or AD-036633 GASKETS 4" - 24" 1.6 mm Synthetic fiber
1¼" and smaller Mild steel machine bolts/ square heads and hex nuts to ASTM A307, Grade B
BOLTING
1½" and larger ASTM A193 B7 stud bolts, semi-finished, heavy pattern ASTM A194 2H hex nuts
2" and smaller Class 800 Socketweld/ Threaded
ASTM A105N body, BB, OS&Y, API 602, Trim No.8
(6) GATE VALVES
3" and larger Class 150 FF Flanged ASTM A216-WCB body, BB, OS&Y, API 600, Trim No.8
(6)
2" and smaller Class 800 Socketweld/ Threaded
ASTM A105N body, BB, OS&Y, Trim No.8
(6) GLOBE VALVES
3" and larger Class 150 FF Flanged ASTM A216-WCB body, BB, OS&Y, Trim No.8
(6)
2" and smaller Class 800 Socketweld/ Threaded ASTM A105N body, BC, Trim No.8 (6)
CHECK VALVES 3" and larger Class 150 FF Flanged ASTM A216-WCB body, BC, Trim No.1 (6)
2" and smaller Class 300 Socketweld/ Threaded
ASTM A105N body, floating ball, RTFE seats, Trim No.10, fire safe
(6) (7)
3" and 4" Class 150 FF Flanged ASTM A216-WCB body, floating ball, RTFE seats, Trim No.10, fire safe
(6) (7) BALL VALVES
6" and larger Class 150 FF Flanged ASTM A216-WCB body, trunnion mounted, Trim ENP, fire safe
(6) (7)
BUTTERFLY VALVES 4" and larger 200 psig Wafer or lug Ductile Iron ASTM A395 body, API 609
Cat.A, Trim ENP
Notes: Notes (1) through (10) of 10.12.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 150 of 403
10.13 Carbon Steel for Toxic and Benzene (<95% wt) Service Line Classes.
10.13.1 Line Classes Notes
The following Notes shall apply to all of the carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration welds.
(4) Valve leakage
All block valves shall satisfy the following:
• Tightness class: “B” according to ISO-15848, part I, table 1. Test fluid shall be helium (class BH)
• Endurance class: CO2 (1500 cycles)
• Temperature class: 400°C according to ISO-15848, part I, table 3.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) Minimum line size shall be of 1”.for line classes of 4.5 and 6.0 mm of corrosion allowance
(10) Surface Roughness shall be < 3.2 μm
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 151 of 403
10.13.2 Line Class: 101CS1X
Line Class: 101CS1X Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Toxic, Benzene (<95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25
Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
¾" Sch 160 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N MSS SP 97
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 150 Socketweld RF SM (8)
FLANGES 2" and above Class 150 Weldneck RF
SM
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 150 RF Flanged SM
A216-WCB body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 8
(6)
1½” and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, Trim No. 8
(6) GLOBE VALVES
2” and above Class 150 RF Flanged SM
A216-WCB body, BB, OS&Y, Live Loaded Sealing, Trim No. 8
(6) 1½” and under Class 800 Socketweld A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2” and above Class 150 RF Flanged
SM A216-WCB body, BC, Trim No. 1 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe
(6) (7)
2” to 4” Class 150 RF Flanged SM
A216-WCB body, floating ball, RTFE seats, fire s., API 6D, Graphite Packing, Trim N.10
(6) (7) BALL VALVES
6” and above Class 150 RF Flanged SM
A216-WCB body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP
(6) (7)
BUTTERFLY VALVES 26” and above Class 150 RF Flanged
SM A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP (10)
Notes: Notes (1) through (10) of 10.13.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 152 of 403
10.13.3 Line Class: 101CS2X
Line Class: 101CS2X Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Toxic, Benzene (<95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25
Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3" to 4” S-80
6" to 10” S-40 12" to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N MSS SP 97
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 150 Socketweld RF SM (8)
FLANGES 2" and above Class 150 Weldneck RF
SM
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 150 RF Flanged SM
A216-WCB body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 8
(6)
1½” and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, Trim No. 8
(6) GLOBE VALVES
2” and above Class 150 RF Flanged SM
A216-WCB body, BB, OS&Y, Live Loaded Sealing, Trim No. 8
(6) 1½” and under Class 800 Socketweld A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2” and above Class 150 RF Flanged
SM A216-WCB body, BC, Trim No. 1 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe
(6) (7)
2” to 4” Class 150 RF Flanged SM
A216-WCB body, floating ball, RTFE seats, fire s., API 6D, Graphite Packing, Trim N.10
(6) (7) BALL VALVES
6” and above Class 150 RF Flanged SM
A216-WCB body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP
(6) (7)
BUTTERFLY VALVES 26” and above Class 150 RF Flanged
SM A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP (10)
Notes: Notes (1) through (10) of 10.13.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 153 of 403
10.13.4 Line Class: 103CS1X
Line Class: 103CS1X Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Toxic, Benzene (<95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25
Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
¾" Sch 160 1" to 2" Sch 80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless A106 Gr. B or API 5L Gr. B PIPE
20” and above calculate Welded API 5L Gr. B
(1) (2) (3)
1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 (4) FITTINGS El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 300 Socketweld RF SM (8)
FLANGES 2" and above Class 300 Weldneck RF
SM
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RF Flanged SM
A216-WCB body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 8
(6)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged SM
A216-WCB body, BB, OS&Y, Live Loaded Sealing, Trim No. 8
(6) 1½" and under Class 800 Socketweld A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2" and above Class 300 RF Flanged
SM A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 300 RF Flanged SM
A216-WCB body, floating ball, RTFE seats, fire s., API 6D, Graphite Packing, Trim N.10
(6) (7) BALL VALVES
6" and above Class 300 RF Flanged SM
A216-WCB body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP
(6) (7)
BUTTERFLY VALVES 26" and above Class 300 RF Flanged
SM A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP (10)
Notes: Notes (1) through (10) of 10.13.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 154 of 403
10.13.5 Line Class: 103CS2X
Line Class: 103CS2X Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Toxic, Benzene (<95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25
Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless A106 Gr. B or API 5L Gr. B PIPE
20” and above calculate Welded API 5L Gr. B
(1) (2) (3)
1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 (4) FITTINGS El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 300 Socketweld RF SM (8)
FLANGES 2" and above Class 300 Weldneck RF
SM
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RF Flanged SM
A216-WCB body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 8
(6)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, Live Loaded Sealing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged SM
A216-WCB body, BB, OS&Y, Live Loaded Sealing, Trim No. 8
(6) 1½" and under Class 800 Socketweld A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2" and above Class 300 RF Flanged
SM A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 300 RF Flanged SM
A216-WCB body, floating ball, RTFE seats, fire s., API 6D, Graphite Packing, Trim N.10
(6) (7) BALL VALVES
6" and above Class 300 RF Flanged SM
A216-WCB body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP
(6) (7)
BUTTERFLY VALVES 26" and above Class 300 RF Flanged
SM A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP (10)
Notes: Notes (1) through (10) of 10.13.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 155 of 403
10.14 Carbon Steel for Highly Viscous Service Line Classes.
10.14.1 Line Classes Notes
The following Notes shall apply to all of the carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) Minimum line size shall be of 1”.
(10) Surface Roughness shall be < 3.2 μm
(11) Valve jacket connection shall be from ½ to 1”, dipending on the valve size.
(12) Use not-jacketed plug valve when line is electrical traced.
(13) To be used only to connect oversized jackted plug valves.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 156 of 403
10.14.2 Line Class: 101CS4V Line Class: 101CS4V Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Viscous Fluid Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
1” to 2" S-XXS 3" S-160 4" S-120 6” S-80
8” to 10” S-60 12” to 16” S-40
18” S-30
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above Calculate Welded API 5L Gr B (3) FITTINGS El's Tees, Reducers
1" and above
Buttweld A234-Gr. WPB, B16.9 (5)
Equal Cross 1" and above Buttweld A234 Gr. WPB, B16.9 Weldolets 1” and above Buttweld A 105N MSS SP 97
RED. SLIP ON FLANGES 1” and above Class 150 Slip on RF A105N, B16.5 (8)
(13)
FLANGES 1" and above Class 150 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 150 Oversized RF Flanged
A105N body, not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std. JACKETED
PLUG VALVES 2" and above Class 150 Oversized
RF Flanged
A216-WCB body, , not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std.
(6) (11)
1½" and under Class 150 RF Flanged A105N body, not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std. PLUG VALVES
2" and above Class 150 RF Flanged A216-WCB body, , not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std.
(6) (11) (12)
Notes: In addition to the notes (1) through (12) of 10.14.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 157 of 403
10.14.3 Line Class: 103CS4V Line Class: 103CS4V Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Viscous Fluid Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
Up to 2" S-XXS 3" S-160 4” S-120
6" to 8” S-80 10” to 18” S-60
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr B (3) FITTINGS El's Tees, Reducers
1" and above
Buttweld A234-Gr. WPB, B16.9 (5)
Equal Cross 1" and above Buttweld A234 Gr. WPB, B16.9 Weldolets 1” and above Buttweld A 105N MSS SP 97
RED. FLANGES 1” and above Class 300 Slip on RF A105N, B16.5 (8) (13)
FLANGES 1" and above Class 300 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 300 Oversized RF Flanged
A105N body, not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std. JACKETED
PLUG VALVES 2" and above Class 300 Oversized
RF Flanged
A216-WCB body, , not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std.
(6) (11)
1½" and under Class 300 RF Flanged A105N body, not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std. PLUG VALVES
2" and above Class 300 RF Flanged A216-WCB body, , not lubricated, tapered plug, BC, Trim 316, RTFE Sleeve, Gask Manufacturer Std.
(6) (11) (12)
Notes: In addition to the notes (1) through (12) of 10.14.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 158 of 403
10.15 Carbon Steel for Ammonium Bisulfide Service Line Classes
10.15.1 Line Classes Notes
The following Notes shall apply to all of the steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1. Fluid velocities shall be within the range of 10-20 ft/s (target 15 ft/s).
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe. Dead legs shoul be avoided.
(5) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(6) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(7) Flanges
Refer to JERES-L-109 for flange material selection.
(8) Piping material shall be furnished in accordance with the requirements of JERES-A-301.
(9) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.
(10) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 159 of 403
10.15.2 Line Class: 103CH2N
Line Class: 103CH2N Basic Material: HIC Resist. C.S. Max. Temperature: 425°C Stress Relief: PWHT Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 51.1 46.6 43.8 41.5
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld
A234-Gr. WPB, B16.9 where applicable. Elbow shall have 5D
Radius (4)
Nipples and Swages 2" and under Seamless A106 Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld
Weldolets 2" and above Buttweld A105N, B16.11
1½" and under Class 300 Socketweld RF
FLANGES 2" and above Class 300 Weldneck RF
A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 800 Socketweld/ with nipples A105N body, BC,Trim No. 10 (6)
CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½” and under Class 300 Socketweld / with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
1½” and under Class 600 Socketweld/ with nipples
A105N body, lubricated, inverted pressure balanced, BC Trim SS 316
(6)
PLUG VALVES
2” and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4” and above Class 300 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.15.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 160 of 403
10.15.3 Line Class: 103CH3N
Line Class: 103CH3N Basic Material: HIC Resist. C.S. Max. Temperature: 425°C Stress Relief: PWHT Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 51.1 46.6 43.8 41.5
Item Size Rating Schedule Type Specification Notes
1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-60
12” to 14” S-XS 16” to 18” S-60
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld
A234-Gr. WPB, B16.9 where applicable. Elbow shall have 5D
Radius (4)
Nipples and Swages 2" and under Seamless A106 Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld
Weldolets 2" and above Buttweld A105N, B16.11
1½" and under Class 300 Socketwd RF
FLANGES 2" and above Class 300 Weldneck RF
A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ with nipples A105N body, BC,Trim No. 10 (6)
CHECK VALVES 2" and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6)(7) BALL VALVES
6" and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
1½" and under Class 600 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, BC Trim SS 316
(6)
PLUG VALVES
2" and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
Notes: Notes (1) through (10) of 10.15.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 161 of 403
10.15.4 Line Class: 106CH3N
Line Class: 106CH3N Basic Material: HIC Resist. C.S. Max. Temperature: 425°C Stress Relief: PWHT Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 102.1 93.2 87.6 83.0
Item Size Rating Schedule Type Specification Notes
1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-60
12” to 14” S-XS 16” to 18” S-60
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld
A234-Gr. WPB, B16.9 where applicable. Elbow shall have 5D
Radius (4)
Nipples and Swages 2" and under Seamless A106 Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld
Weldolets 2" and above Buttweld A105N, B16.11
1½" and under Class 300 Socketwd RF
FLANGES 2" and above Class 300 Weldneck RF
A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (6)
1½" and under (6) Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above (6)
RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under (6) Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2" and above (6) RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under (6) Socketweld/ with nipples A105N body, BC,Trim No. 10 (6)
CHECK VALVES 2" and above (6) RF Flanged A216-WCB body, BC, Trim No. 10 (6)
1½" and under (6) Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2" to 4" (6) RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above (6) RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
1½" and under (6) Socketweld
with nipples
A105N body, lubricated, inverted pressure balanced, BC Trim SS 316
(6)
PLUG VALVES
2" and above (6)
RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
Notes: Notes (1) through (10) of 10.15.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 162 of 403
10.15.5 Line Class: 203CH3N (to be only applied to hydrocracker)
Line Class: 203CH3N Basic Material: HIC Resist. C.S. Max. Temperature: 425°C Stress Relief: PWHT Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 300 RTJ B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
1½” S-XXS 2" to 3" S-160 4" to 6” S-80 8” to 10” S-60
12” to 14” S-XS 16” to 18” S-60
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld
A234-Gr. WPB, B16.9 where applicable. Elbow shall have 5D
Radius (4)
Nipples and Swages 2" and under Seamless A106 Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld
Weldolets 2" and above Buttweld A105N, B16.11
1½" and under Class 300 Socketwd RTJ
FLANGES 2" and above Class 300 Weldneck RTJ
A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Soft Iron octagonal ring, per B16.20.
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 300 RTJ Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld with nipples
A105N body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RTJ Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ with nipples A105N body, BC,Trim No. 10 (6)
CHECK VALVES 2" and above Class 300 RTJ Flanged A216-WCB body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 300 RTJ Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 300 RTJ Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
1½" and under Class 600 Socketweld with nipples
A105N body, lubricated, inverted pressure balanced, BC Trim SS 316
(6)
PLUG VALVES
2" and above Class 300 RTJ Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
Notes: Notes (1) through (10) of 10.15.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 163 of 403
10.15.6 Line Class: 215CH3N
Line Class: 215CH3N Basic Material: HIC Resist. C.S. Max. Temperature: 425°C Stress Relief: PWHT Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 255.3 233.0 219.0 199.1 181.8 143.8
Item Size Rating Schedule Type Specification Notes
Up to 6" S-XXS 8" to 18" S-160
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3)
1½" and under Class acc. to B16.11 Socketweld A105N B16.11 (4) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld
A234-Gr. WPB, B16.9 where applicable. Elbow shall have 5D
Radius (4)
Weldolets 2” and above Buttweld A 105N MSS SP 97
FLANGES All Class 1500 Weldneck RTJ A105N, B16.5 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS Octagonal Ring, Soft Iron, B16.20.
1½" and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, API 602, Trim No.12
(6)
GATE VALVES 2" and above Class 1500 RTJ Flanged
A216-WCB body, Wedge type: OS&Y, Press. Seal., graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 1500 RTJ Flanged A105N body, OS&Y, WB, graphite packing, Trim No. 12
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A216-WCB body, OS&Y, Press. Seal., graphite packing, Trim No. 12
(6) 1½" and under Class 1500 RTJ Flanged A105N body, WC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 1500 RTJ Flanged A216-WCB body, Press. Seal., Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.15.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 164 of 403
10.16 Low and Medium Alloys Steel for Process Services
10.16.1 Line Classes Notes
The following Notes shall apply to all of this low and medium alloy steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Threaded connections only allowed downstream of vents, drains, hydrotest connections, and instrument take-offs. Threaded O'lets only allowed for thermowell and hydrotest connections.
(5) Gaskets
Spiral-wound gaskets shall have inner and outer ring. The inner shall be 316 SS.
(6) Minimum size shall be of 1” for line class with 4.5 and 6.0 mm of corrosion allowance.
(7) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 165 of 403
10.16.2 Line Class: 101CJ1P
Line Class: 101CJ1P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 150 250 350 450 538 Pressure Rating (bar) (2) 19.8 15.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
¾” S-160 1" to 2" S-80 3" to 10” S-40 12” to 18” S-20
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F11, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P11
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F11 Cl. 2,
MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F11 Cl. 2, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20.
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 150 RF Flanged
A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
1½" and under Class 150 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 150 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE
2" and above Class 150 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 166 of 403
10.16.3 Line Class: 103CJ2P
Line Class: 103CJ2P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.0 42.9 36.5 25.7 7.2
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 12” S-STD 14” to 16” S-40
18” S-XS
Seamless A335 Gr. P11 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F11, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P11
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F11 Cl. 2,
MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F11 Cl. 2, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20.
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 300 RF Flanged
A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 300 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE
2" and above Class 300 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 167 of 403
10.16.4 Line Class: 106CJ1P
Line Class: 106CJ1P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification Notes
¾” S-XXS 1” to 2” S-160 3” to 6” S-80
8” to 18” S-60
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3)
1½” and under Class acc. To B16.11
Socketweld/ Threaded A182 Gr. F11, B16.11 (4) FITTINGS
El’s Tees,
Reducers, Caps, Couplings etc.
2” and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9
Nipples and Swages 2” and under Seamless A335 Gr. P11
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP97 Socketweld/
Threaded A182 Gr. F11 Cl. 2,
MSS-SP97 (4)
Weldolets 2” and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
1½” and under Class 600 Socketweld RF A182 Gr. F11 Cl. 2, B16.5 FLANGES
2” and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20.
1½” and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2” and above Class 600 RF Flanged
A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
1½” and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2” and above Class 600 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite
packing, Trim No. 8
1½” and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE
2” and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 168 of 403
10.16.5 Line Class: 106CJ1P1
Line Class: 106CJ1P1 Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3” to 6” S-80
8” to 18” S-60
Seamless A335 Gr. P11 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A182 Gr. F11, B16.11 (4) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P11
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F11 Cl. 2,
MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F11 Cl. 2, B16.5 FLANGES
2" and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20.
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 12
GATE VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 12
GLOBE VALVES 2" and above Class 600 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite
packing, Trim No. 12
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC, Trim No. 10 CHECK VALVE
2" and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 10
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 169 of 403
10.16.6 Line Class: 106CJ2P
Line Class: 106CJ2P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification Notes
¾” S-XXS 1” to 2” S-160
3” to 18” S-80 Seamless A335 Gr. P11 (1)
(2) PIPE
20” and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3)
1½” and under
Class acc. To
B16.11
Socketweld/ Threaded A182 Gr. F11, B16.11 (4)
FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9
Nipples and Swages 2” and under Seamless A335 Gr. P11
Sockolets/ Threadolets 1½” and under Class. Acc. To MSS
SP97 Socketweld/
Threaded A182 Gr. F11 Cl. 2,
MSS-SP97 (4)
Weldolets 2” and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
1½” and under Class 600 Socketweld RF A182 Gr. F11 Cl. 2, B16.5 FLANGES
2” and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20.
1½” and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2” and above Class 600 RF Flanged
A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
1½” and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2” and above Class 600 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite
packing, Trim No. 8
1½” and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE
2” and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 170 of 403
10.16.7 Line Class: 106CJ4P
Line Class: 106CJ4P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification Notes
1” to 2” S-XXS 3” to 4” S-160 6” to 8” S-120
10” to 18” S-100
Seamless A335 Gr. P11 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
FLANGES 1" and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20.
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 600 RF Flanged
A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 600 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE
2" and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 171 of 403
10.16.8 Line Class: 209CJ4P
Line Class: 209CJ4P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 155.1 143.9 128.6 109.8 77.2 21.5
Item Size Rating Schedule Type Specification Notes
1” to 2” S-XXS 3” to 4” S-160 6” to 8” S-120
10” to 18” S-100
Seamless A335 Gr. P11 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
FLANGES 1" and above Class 900 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal Ring B16.10
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 3" and above Class 900 RTJ Flanged
A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 3" and above Class 900 RTJ Flanged A217 Gr. WC6, BB, OS&Y, graphite
packing, Trim No. 8
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE
3" and above Class 900 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 172 of 403
10.16.9 Line Class: 103CK1P
Line Class: 103CK1P Basic Material: 2.25 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.6 42.9 36.5 28.2 8.3
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 12” S-STD 14” to 16” S-40
18” S-XS
Seamless A335 Gr. P22 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 2.25Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F22, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP22 Cl. 1 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P22
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F22 Cl. 3,
MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F22 Cl. 3, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F22 Cl. 3, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F22 Cl. 3, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20.
1½" and under Class 800 Socketweld with nipples
A182 Gr. F22 Cl. 3 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 300 RF Flanged
A217 Gr. WC9 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F22 Cl. 3 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 300 RF Flanged A217 Gr. WC9, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F22 Cl. 3 body, BC, Trim No. 1 CHECK VALVE
2" and above Class 300 RF Flanged A217 Gr. WC9 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 173 of 403
10.16.10 Line Class: 101CL2P Line Class: 101CL2P Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 150 250 350 450 538 Pressure Rating (bar) (2) 20.0 15.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 12” S-STD 14” to 16” S-40
18” S-XS
Seamless A335 Gr. P5 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 5Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F5, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP5 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P5
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F5, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F5, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F5, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts up to 510°C.
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20.
1½" and under Class 800 Socketweld with nipples
A182 Gr. F5 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 150 RF Flanged
A217 Gr. C5 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F5 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 150 RF Flanged A217 Gr. C5, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples A182 Gr. F5 body, BC,Trim No. 1 CHECK VALVE
2" and above Class 150 RF Flanged A217 Gr. C5 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 174 of 403
10.16.11 Line Class: 101CL4P Line Class: 101CL4P Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 150 250 350 450 538 Pressure Rating (bar) (2) 20.0 15.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
1” to 2” S-XXS 3” S-160 4” S-120 6” S-80
8” to 10” S-60 12” to 16” S-40
18” S-30
Seamless A335 Gr. P5 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 5Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP5 Seamless/Welded, B16.9
Weldolets 1" and above Buttweld A182 Gr. F5, MSS-SP97
FLANGES 1" and above Class 150 Weldneck RF A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts.
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring and SS 316 inner ring per B16.20. (5)
1½" and under Class 150 RF Flanged A182 Gr. F5 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 150 RF Flanged
A217 Gr. C5 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 150 RF Flanged A182 Gr. F5 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 150 RF Flanged A217 Gr. C5, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 150 RF Flanged A182 Gr. F5 body, BC,Trim No. 1 CHECK VALVE 2" and above Class 150 RF Flanged A217 Gr. C5 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 175 of 403
10.16.12 Line Class: 103CL1P Line Class: 103CL1P Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 51.7 46.3 40.3 33.7 12.0 7.3
Item Size Rating Schedule Type Specification Notes
Up to 2” S-160 3” to 4” S-80
6” to 14” S-60 16” to 18” S-40
Seamless A335 Gr. P5 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 5Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F5, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP5 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P5
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F5, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F5, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F5, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F5 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 300 RF Flanged
A217 Gr. C5 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F5 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 300 RF Flanged A217 Gr. C5, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples A182 Gr. F5 body, BC,Trim No. 1 CHECK VALVE
2" and above Class 300 RF Flanged A217 Gr. C5 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 176 of 403
10.16.13 Line Class: 103CL2P Line Class: 103CL2P Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 51.7 46.3 40.3 33.7 12.0 7.3
Item Size Rating Schedule Type Specification Notes
Up to 2” S-160 3” to 6” S-80
8” to 10” S-60 12” S-XS
14” to 18” S-60
Seamless A335 Gr. P5 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 5Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F5, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP5 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P5
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F5, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F5, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F5, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F5 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 300 RF Flanged
A217 Gr. C5 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F5 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 300 RF Flanged A217 Gr. C5, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples A182 Gr. F5 body, BC,Trim No. 1 CHECK VALVE
2" and above Class 300 RF Flanged A217 Gr. C5 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 177 of 403
10.16.14 Line Class: 103CL4P Line Class: 103CL4P Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 51.7 46.3 40.3 33.7 12.0 7.3
Item Size Rating Schedule Type Specification Notes
Up to 1½” S-XXS 2” to 3” S-160
4” S-120 6” to 8” S-80
10” to 18” S-60
Seamless A335 Gr. P5 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 5Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP5 Seamless/Welded, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F5, MSS-SP97
FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 300 RF Flanged A182 Gr. F5 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above
Class 300 RF Flanged A217 Gr. C5 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 300 RF Flanged A182 Gr. F5 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 300 RF Flanged A217 Gr. C5, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 300 RF Flanged A182 Gr. F5 body, BC,Trim No. 1 CHECK VALVE 2" and above Class 300 RF Flanged A217 Gr. C5 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 178 of 403
10.16.15 Line Class: 225CL2P Line Class: 225CL2P Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 430.9 386.2 335.3 281.8 100.4 60,7
Item Size Rating Schedule Type Specification Notes
Up to 4” S-XXS 6” to 8” calculate
Seamless A335 Gr. P5 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 5Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
1" and above Buttweld A234 Gr. WP5 Seamless/Welded, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F5, MSS-SP97
FLANGES 1" and above Class 2500 Weldneck RTJ A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS 5 Cr octagonal ring, B16.20
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 2500 RTJ Flanged
A217 Gr. C5 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 2500 RTJ Flanged A217 Gr. C5, PSB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WC,Trim No. 1 CHECK VALVE 2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, PSC, Trim No. 1
Notes: Notes (1) through (7) of 10.11.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 179 of 403
10.16.16 Line Class: 225CL2P1 Line Class: 225CL2P1 Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Corrosive Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 430.9 386.2 335.3 281.8 100.4 60,7
Item Size Rating Schedule Type Specification Notes
Up to 4” S-XXS 6” to 8” calculate
Seamless A335 Gr. P5 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 5Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
1" and above Buttweld A234 Gr. WP5 Seamless/Welded, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F5, MSS-SP97
FLANGES 1" and above Class 2500 Weldneck RTJ A182 Gr. F5, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS 5 Cr octagonal ring, B16.20
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WB, OS&Y, graphite packing, API 602, Trim No. 12
GATE VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WB, OS&Y, graphite packing, Trim No. 12
GLOBE VALVES 2" and above Class 2500 RTJ Flanged A217 Gr. C5, PSB, OS&Y, graphite
packing, Trim No. 12
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 body, WC,Trim No. 10 CHECK VALVE 2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, PSC, Trim No. 10
Notes: Notes (1) through (7) of 10.11.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 180 of 403
10.16.17 Line Class: 101CM2P Line Class: 101CM2P Basic Material: 9 Cr – 1.0 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 150 250 350 450 538 Pressure Rating (bar) (2) 20.0 15.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
1½" S-XXS 2” to 3” S-160 4” to 6” S-120
8” S-100 10” to 14” S-XS 16” to 18” S-60
Seamless A335 Gr. P9 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 9Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F9, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP9 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P9
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F9, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F9, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F9, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F9, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 150 RF Flanged
A217 Gr. C12 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 150 RF Flanged A217 Gr. C12, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples A182 Gr. F9 body, BC,Trim No. 1 CHECK VALVE
2" and above Class 150 RF Flanged A217 Gr. C12 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 181 of 403
10.16.18 Line Class: 101CM3P Line Class: 101CM3P Basic Material: 9 Cr – 1.0 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 150 250 350 450 538 Pressure Rating (bar) (2) 20.0 15.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
1½" to 2” S-XXS 3” to 6” S-160
8” S-120 10” to 18” S-60
Seamless A335 Gr. P9 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 9Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F9, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP9 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P9
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F9, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F9, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F9, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F9, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 150 RF Flanged
A217 Gr. C12 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 150 RF Flanged A217 Gr. C12, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples A182 Gr. F9 body, BC,Trim No. 1 CHECK VALVE
2" and above Class 150 RF Flanged A217 Gr. C12 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 182 of 403
10.16.19 Line Class: 101CM4P Line Class: 101CM4P Basic Material: 9 Cr – 1.0 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 150 250 350 450 538 Pressure Rating (bar) (2) 20.0 15.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
Up to 2" S-XXS 3" S-160 4" S-120 6” S-80
8” to 10” S-60 12” to 16” S-40
18” S-30
Seamless A335 Gr. P9 (1) (2) PIPE
20” and above Calculate Welded A691 Gr. 9Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP9 Seamless/Welded, B16.9
Weldolets 1" and above Buttweld A182 Gr. F9, MSS-SP97
FLANGES 1" and under Class 150 Weldneck RF A182 Gr. F9, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 150 RF Flanged A182 Gr. F9 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 150 RF Flanged
A217 Gr. C12 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 150 RF Flanged A182 Gr. F9 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 150 RF Flanged A217 Gr. C12, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 150 RF Flanged A182 Gr. F9 body, BC,Trim No. 1 CHECK VALVE 2" and above Class 150 RF Flanged A217 Gr. C12 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 183 of 403
10.16.20 Line Class: 103CM2P Line Class: 103CM2P Basic Material: 9 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 51.7 46.3 40.3 33.7 15.0 8.5
Item Size Rating Schedule Type Specification Notes
1½" S-XXS 2” to 3” S-160 4” to 6” S-120
8” S-100 10” to 14” S-XS 16” to 18” S-60
Seamless A335 Gr. P9 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 9Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F9, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP9 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P9
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F9, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F9, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F9, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F9, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 300 RF Flanged
A217 Gr. C12 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 300 RF Flanged A217 Gr. C12, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples A182 Gr. F9 body, BC,Trim No. 1 CHECK VALVE
2" and above Class 300 RF Flanged A217 Gr. C12 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 184 of 403
10.16.21 Line Class: 103CM3P Line Class: 103CM3P Basic Material: 9 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 51.7 46.3 40.3 33.7 15.0 8.5
Item Size Rating Schedule Type Specification Notes
1½" to 2” S-XXS 3” to 6” S-160
8” S-120 10” to 18” S-60
Seamless A335 Gr. P9 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 9Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F9, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP9 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P9
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F9, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F9, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F9, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F9, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 300 RF Flanged
A217 Gr. C12 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 300 RF Flanged A217 Gr. C12, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples A182 Gr. F9 body, BC,Trim No. 1 CHECK VALVE
2" and above Class 300 RF Flanged A217 Gr. C12 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 185 of 403
10.16.22 Line Class: 103CM4P Line Class: 103CM4P Basic Material: 9 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 51.7 46.3 40.3 33.7 15.0 8.5
Item Size Rating Schedule Type Specification Notes
1" to 2” S-XXS 3” S-160 4” S-120
6” to 8” S-80 10” to 18” S-60
Seamless A335 Gr. P9 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 9Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP9 Seamless/Welded, B16.9
Weldolets 1" and above Buttweld A182 Gr. F9, MSS-SP97
FLANGES 1" and under Class 300 Weldneck RF A182 Gr. F9, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 300 RF Flanged A182 Gr. F9 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 300 RF Flanged
A217 Gr. C12 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 300 RF Flanged A182 Gr. F9 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 300 RF Flanged A217 Gr. C12, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 300 RF Flanged A182 Gr. F9 body, BC,Trim No. 1 CHECK VALVE 2" and above Class 300 RF Flanged A217 Gr. C12 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 186 of 403
10.16.23 Line Class: 106CM2P Line Class: 106CM2P Basic Material: 9 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 103.4 92.7 80.4 67.7 30.0 17.0
Item Size Rating Schedule Type Specification Notes
1½" S-XXS 2” to 3” S-160 4” to 6” S-120
8” S-100 10” to 14” S-XS 16” to 18” S-60
Seamless A335 Gr. P9 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 9Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F9, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP9 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P9
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F9, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F9, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F9, B16.5 FLANGES
2" and above Class 600 Weldneck RF A182 Gr. F9, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 600 RF Flanged
A217 Gr. C12 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 600 RF Flanged A217 Gr. C12, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples A182 Gr. F9 body, BC,Trim No. 1 CHECK VALVE
2" and above Class 600 RF Flanged A217 Gr. C12 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 187 of 403
10.16.24 Line Class: 106CM3P Line Class: 106CM3P Basic Material: 9 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 4.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 103.4 92.7 80.4 67.7 30.0 17.0
Item Size Rating Schedule Type Specification Notes
1½" to 2” S-XXS 3” to 6” S-160
8” S-120 10” to 18” S-60
Seamless A335 Gr. P9 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 9Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F9, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP9 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P9
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F9, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F9, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F9, B16.5 FLANGES
2" and above Class 600 Weldneck RF A182 Gr. F9, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. (5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 600 RF Flanged
A217 Gr. C12 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F9 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 600 RF Flanged A217 Gr. C12, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples A182 Gr. F9 body, BC,Trim No. 1 CHECK VALVE
2" and above Class 600 RF Flanged A217 Gr. C12 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 188 of 403
10.16.25 Line Class: 201CJ1P
Line Class: 201CJ1P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: per Code Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 150 250 350 450 538 Pressure Rating (bar) (2) 19.8 15.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
¾” S-160 1" to 2" S-80 3" to 10” S-40 12” to 18” S-20
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F11, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P11
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F11 Cl. 2,
MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
1½" and under Class 150 Socketweld RTJ A182 Gr. F11 Cl. 2, B16.5 FLANGES
2" and above Class 150 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal Ring B16.10
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 150 RTJ Flanged
A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
1½" and under Class 150 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 150 RTJ Flanged A217 Gr. WC6, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE
2" and above Class 150 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 189 of 403
10.16.26 Line Class: 203CJ1P Line Class: 203CJ1P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: per Code Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.0 42.9 36.5 25.7 7.2
Item Size Rating Schedule Type Specification Notes
1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-30
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F11, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A335 Gr. P11
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F11 Cl. 2,
MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
1½" and under Class 300 Socketweld RTJ A182 Gr. F11 Cl. 2, B16.5 FLANGES
2" and above Class 300 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal Ring B16.10
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2" and above Class 300 RTJ Flanged
A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2" and above Class 300 RTJ Flanged A217 Gr. WC6, BB, OS&Y, graphite
packing, Trim No. 8
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE
2" and above Class 300 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 190 of 403
10.16.27 Line Class: 206CJ1P
Line Class: 206CJ1P Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: per Code Service: Process Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification Notes
1” to 2” S-160 3” to 6” S-80
8” to 18” S-60 Seamless A335 Gr. P11 (1)
(2) PIPE
20" and above calculate Welded A691 Gr. 1.25Cr Cl. 22 (3)
1½” and under
Class acc. To
B16.11
Socketweld/ Threaded A182 Gr. F11, B16.11 (4)
FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A234 Gr. WP11 Cl. 1 Seamless/Welded, B16.9
Nipples and Swages 2” and under Seamless A335 Gr. P11
Sockolets/ Threadolets 1½” and under Class. Acc. To MSS
SP97 Socketweld/
Threaded A182 Gr. F11 Cl. 2,
MSS-SP97 (4)
Weldolets 2” and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
1½” and under Class 600 Socketweld RTJ A182 Gr. F11 Cl. 2, B16.5 FLANGES
2” and above Class 600 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal Ring B16.10
1½” and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
GATE VALVES 2” and above Class 600 RTJ Flanged
A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 8
1½” and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 8
GLOBE VALVES 2” and above Class 600 RTJ Flanged A217 Gr. WC6, BB, OS&Y, graphite
packing, Trim No. 8
1½” and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC, Trim No. 1 CHECK VALVE
2” and above Class 600 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1
Notes: Notes (1) through (7) of 10.16.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 191 of 403
10.17 Low and Medium Alloys Steel for Hydrogen Services
10.17.1 Line Classes Notes
The following Notes shall apply to all of this low and medium alloy steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Material and Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) For hydrogen service, refer to API-941 for temperature limits of material at applicable hydrogen partial pressure. Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Threaded and socket welded connections are not allowed.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
Threaded connections only allowed downstream of vents, drains, hydrotest connections, and instrument take-offs. Threaded O'lets only allowed for thermowell and hydrotest connections.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
Flange connections shall be avoided as possible and replaced with buttwelded connections
(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 192 of 403
10.17.2 Line Class: 101CJ1H
Line Class: 101CJ1H Basic Mat.: 1.25 Cr – 0.5 Mo Max. Temperature: 538°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 150 250 350 450 538 Pressure Rating (bar) (2) 19.8 15.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification
Notes 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 150 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 150 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8 (6)
GATE VALVES 2" and above Class 150 RF Flanged
A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 150 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 150 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1
(6) CHECK VALVES
2" and above Class 150 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 193 of 403
10.17.3 Line Class: 103CJ1H
Line Class: 103CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.0 42.9 36.5 25.7 7.2
Item Size Rating Schedule Type Specification
Notes 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-30
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 300 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 300 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 300 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1
(6) CHECK VALVES
2" and above Class 300 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 194 of 403
10.17.4 Line Class: 103CJ1H1 (to be only applied to hydrocracker)
Line Class: 103CJ1H1 Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.0 42.9 36.5 25.7 7.2
Item Size Rating Schedule Type Specification
Notes 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-30
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 300 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 300 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 300 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 300 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A217 Gr. WC6 body, BC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 195 of 403
10.17.5 Line Class: 103CJ2H
Line Class: 103CJ2H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.0 42.9 36.5 25.7 7.2
Item Size Rating Schedule Type Specification
Notes 1” to 2” S-160 3” to 4” S-80
6” to 12” S-STD 14” to 16” S-40
18” S-XS
Seamless A335 Gr. P11 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 300 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 300 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 300 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1
(6) CHECK VALVES
2" and above Class 300 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 196 of 403
10.17.6 Line Class: 106CJ1H
Line Class: 106CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification
Notes 1” to 2” S-160 3” to 6” S-80
8” to 18” S-60 Seamless A335 Gr. P11 (1)
(2) PIPE
20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1
(6) CHECK VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 197 of 403
10.17.7 Line Class: 106CJ2H
Line Class: 106CJ2H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification
Notes 1” to 2” S-160
3” to 18” S-80 Seamless A335 Gr. P11 (1)
(2) PIPE 20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1
(6) CHECK VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 198 of 403
10.17.8 Line Class: 106CJ4H
Line Class: 106CJ4H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification
Notes 1” to 2” S-XXS 3” to 4” S-160 6” to 8” S-120
10” to 18” S-100
Seamless A335 Gr. P11 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1
(6) CHECK VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 199 of 403
10.17.9 Line Class: 209CJ1H
Line Class: 209CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 155.1 143.9 128.6 109.8 77.2 21.5
Item Size Rating Schedule Type Specification
Notes 1” to 2” S-160
3” to 18” S-80 Seamless A335 Gr. P11 (1)
(2) PIPE 20” and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3)
FITTINGS
El’s Tees, Reducers, Caps,
etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2” and above Buttweld A182 Gr. F11 Cl. 2, B16.5
2½” and under Class 1500
FLANGES
3” and above Class 900
Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS 5Cr Octagonal Ring, B16.20
2½” and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
3” and above Class 900 RTJ Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
2½” and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
3” and above Class 900 RTJ Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8
(6)
2½” and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 1
(6) CHECK VALVES
3” and above Class 900 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 200 of 403
10.17.10 Line Class: 215CJ1H
Line Class: 215CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 258.6 239.8 214.4 183.1 128.6 35.9
Item Size Rating Schedule Type Specification
Notes
1” to 18” S-160 Seamless A335 Gr. P11 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 1500 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS 5Cr Octagonal Ring, B16.20
1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, PSB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 1
(6) CHECK VALVES
2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, PSC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 201 of 403
10.17.11 Line Class: 215CJ1H1 (to be only applied to hydrocracker)
Line Class: 215CJ1H1 Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 258.6 239.8 214.4 183.1 128.6 35.9
Item Size Rating Schedule Type Specification
Notes
1” to 18” S-160 Seamless A335 Gr. P11 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 1500 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS 5Cr Octagonal Ring, B16.20
1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, PSB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 10
(6) CHECK VALVES
2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, PSC, Trim No. 10
(6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 202 of 403
10.17.12 Line Class: 225CJ1H1 (to be only applied to hydrocracker)
Line Class: 225CJ1H1 Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 430.9 399.6 357.1 304.9 214.4 59.9
Item Size Rating Schedule Type Specification
Notes 1” to 6” S-160
8” to 18” calculate Seamless A335 Gr. P11 (1)
(2) PIPE 20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3)
FITTINGS El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 1" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 2500 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS 5Cr Octagonal Ring, B16.20
1½" and under Class 2500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. WC6 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 2500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. WC6 body, PSB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 2500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 10
(6) CHECK VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. WC6 body, PSC, Trim No. 10
(6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 203 of 403
10.17.13 Line Class: 103CK1H
Line Class: 103CK1H Basic Material: 2.25 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.6 42.9 36.5 28.2 8.3
Item
Size
Rating Schedule
Type
Specification
Notes
1” to 2” S-80 3” to 6” S-40
8” S-20 10” to 14” S-30
16” S-40 18” S-30
Seamless
A335 Gr. P22 (1)
(2) PIPE
20" and above calculate Welded A691 Gr. 2.25Cr Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
1" and above Buttweld A234 Gr. WP22 Cl. 1 Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F22 Cl. 3, MSS-SP97
FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F22 Cl. 3, B16.5 (8) BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A182 Gr. F22 Cl. 3 body, BB, OS&Y, graphite packing, API 602, Trim No. 8
(6) GATE VALVES
2" and above Class 300 RF Flanged A217 Gr. WC9 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 300 RF Flanged A182 Gr. F22 Cl. 3 body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A217 Gr. WC9, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 300 RF Flanged A182 Gr. F22 Cl. 3 body, BC, Trim No. 1
(6) CHECK VALVE
2" and above Class 300 RF Flanged A217 Gr. WC9 body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 204 of 403
10.17.14 Line Class: 225CL2H1 (to be only applied to hydrocracker)
Line Class: 225CL2H1 Basic Material: 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 430.9 386.2 335.3 281.8 100.4 60.7
Item Size Rating Schedule Type Specification
Notes 1” to 6” S-160
8” to 18” calculate Seamless A335 Gr. P5 (1)
(2) PIPE 20" and above calculate Welded A691 Gr. 5Cr Cl. 42 (3)
FITTINGS El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234-Gr. WP5, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 1" and above Buttweld A182 Gr. F5 Cl. 2, B16.5
FLANGES All Class 2500 Weldneck RTJ A182 Gr. F5 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS 5Cr Octagonal Ring, B16.20
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 Cl. 2 body, WB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, PSB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 Cl. 2 body, WC, Trim No. 10
(6) CHECK VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, PSC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 205 of 403
10.17.15 Line Class: 203CJ1H Line Class: 203CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.0 42.9 36.5 25.7 7.2
Item Size Rating Schedule Type Specification
Notes 1” to 2” S-160 3” to 4” S-80
6” to 12” S-STD 14” to 16” S-40
18” S-XS
Seamless A335 Gr. P11 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 300 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS 5 Cr Octagonal Ring B16.10
1½" and under Class 300 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RTJ Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 300 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RTJ Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 300 RTJ Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1
(6) CHECK VALVES
2" and above Class 300 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 206 of 403
10.17.16 Line Class: 206CJ1H Line Class: 206CJ1H Basic Material: 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification
Notes 1” to 2” S-160 3” to 6” S-80
8” to 18” S-60 Seamless A335 Gr. P11 (1)
(2) PIPE
20" and above calculate Welded A691 Gr. 1.25 Cr Cl. 32 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
All Buttweld A234-Gr. WP11, Cl. 1 B16.9 Seamless, Welded (5)
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.5
FLANGES All Class 600 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts
GASKETS 5 Cr Octagonal Ring B16.10
1½" and under Class 600 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 600 RTJ Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 600 RTJ Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing,Trim No. 8
(6) GLOBE VALVES
2" and above Class 600 RTJ Flanged A217 Gr. WC6 body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 600 RTJ Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 1
(6) CHECK VALVES
2" and above Class 600 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 1 (6)
Notes: Notes (1) through (9) of 10.17.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 207 of 403
10.18 Low and Medium Alloys Steel for Sour Services
10.18.1 Line Classes Notes
The following Notes shall apply to all of this low and medium alloy steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(5) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(6) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(7) Flanges
Refer to JERES-L-109 for flange material selection.
(8) Piping material shall be furnished in accordance with the requirements of JERES-A-301.
(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance
(10) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 208 of 403
10.18.2 Line Class: 103CJ1S
Line Class: 103CJ1S Basic Material: Sour 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT
Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.0 42.9 36.5 25.7 7.2
Item Size Rating Schedule Type Specification Notes
1" to 2" Sch 80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless
A335 Gr. P11 (1)
(2) PIPE
20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) 1½" and under Class acc. to B16.11 Socketweld A182 Gr. F11 Cl. 2, B16.11 FITTINGS
El's Tees, Reducers, Caps, et 2" and above Buttweld A234-Gr. WP11 Cl. 1, B16.9 (4)
Nipples and Swage 2" and under Seamless A335 Gr. P11
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.11
1½" and under Class 300 Socketweld RF FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F11 Cl. 2, B16.5
(7) BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Metal grooved gasket with flexible graphite layer is preferred. Or, spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. Inner ring 316
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.12 (5)
GATE VALVES 2" and above Class 300 RF Flanged
A217-WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2" and above Class 300 RF Flanged A217-WC6 body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC,Trim No. 10
(5) CHECK VALVES
2" and above Class 300 RF Flanged A217-WC6 body, BC, Trim No. 10 (5) 1½" and under Class 300 Socketweld
with nipples A182 Gr. F11 Cl. 2 body, floating ball, RTFE seats, Trim No. 10, fire safe (6) (5)
2" to 4" Class 300 RF Flanged A217-WC6 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (5) BALL VALVES
6" and above Class 300 RF Flanged A217-WC6 body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6) (5)
1½" and under Class 600 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, lubricated, inverted pressure balanced, BC Trim SS 316
(5)
PLUG VALVES
2" and above Class 300 RF Flanged A217-WC6 body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4" and above Class 300 RF Flanged A217-WC6 body, high performance, fire-
safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.18.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 209 of 403
10.18.3 Line Class: 106CJ1S
Line Class: 106CJ1S Basic Material: Sour 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT
Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: 100%XRay
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification Notes
1" to 2" S-80 3" S-40
4” to 18” S-80
Seamless
A335 Gr. P11 (1)
(2) PIPE
20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) 1½" and under Class acc. to B16.11 Socketweld A182 Gr. F11 Cl. 2, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WP11 Cl. 1, B16.9 (4)
Nipples and Swage 2" and under Seamless A335 Gr. P11
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.11
1½" and under Class 600 Socketweld RF FLANGES
2" and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5
(7) BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Metal grooved gasket with flexible graphite layer is preferred. Or, spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. Inner ring 316
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2" and above Class 600 RF Flanged A217-WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2" and above Class 600 RF Flanged A217-WC6 body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC,Trim No. 10
(5) CHECK VALVES
2" and above Class 600 RF Flanged A217-WC6 body, BC, Trim No. 10 (5) 1½" and under Class 600 Socketweld
with nipples A182 Gr. F11 Cl. 2 body, floating ball, RTFE seats, Trim No. 10, fire safe (5) (6)
2" to 4" Class 600 RF Flanged A217-WC6 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (5) (6) BALL VALVES
6" and above Class 600 RF Flanged A217-WC6 body, trunnion mounted, fire safe, API 6D, Trim No. 10 (5) (6)
1½" and under Class 600 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, lubricated, inverted pressure balanced, BC Trim SS 316
(5)
PLUG VALVES
2" and above Class 600 RF Flanged A217-WC6 body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4" and above Class 600 RF Flanged A217-WC6 body, high performance,
fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.18.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 210 of 403
10.18.4 Line Class: 106CJ2S
Line Class: 106CJ2S Basic Material: Sour 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT
Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: 100%XRay
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification Notes
1” to 2” S-160
3” to 18” S-80
Seamless
A335 Gr. P11 (1)
(2) PIPE
20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) 1½" and under Class acc. to B16.11 Socketweld A182 Gr. F11 Cl. 2, B16.11 FITTINGS
El's Tees, Reducers, Caps, et 2" and above Buttweld A234-Gr. WP11 Cl. 1, B16.9 (4)
Nipples and Swage 2" and under Seamless A335 Gr. P11
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld
Weldolets 2" and above Buttweld A182 Gr. F11 Cl. 2, B16.11
1½" and under Class 600 Socketweld RF FLANGES
2" and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5
(7) BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Metal grooved gasket with flexible graphite layer is preferred. Or, spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. Inner ring 316
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5)
GATE VALVES
2" and above Class 600 RF Flanged A217-WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2" and above Class 600 RF Flanged A217-WC6 body, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, BC,Trim No. 10
(5) CHECK VALVES
2" and above Class 600 RF Flanged A217-WC6 body, BC, Trim No. 10 (5) 1½" and under Class 600 Socketweld
with nipples A182 Gr. F11 Cl. 2 body, floating ball, RTFE seats, Trim No. 10, fire s. (5) (6)
2" to 4" Class 600 RF Flanged A217-WC6 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (5) (6) BALL VALVES
6" and above Class 600 RF Flanged A217-WC6 body, trunnion mounted, fire safe, API 6D, Trim No. 10 (5) (6)
1½" and under Class 600 Socketweld with nipples
A182 Gr. F11 Cl. 2 body, lubricated, inverted pressure balanced, BC Trim SS 316
(5)
PLUG VALVES
2" and above Class 600 RF Flanged A217-WC6 body, BC lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4" and above Class 600 RF Flanged A217-WC6 body, high performance,
fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.18.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 211 of 403
10.18.5 Line Class: 106CJ4S
Line Class: 106CJ4S Basic Material: Sour 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT
Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: 100%XRay
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 103.4 95.9 85.7 73.3 51.5 14.4
Item Size Rating Schedule Type Specification Notes
1” to 2” S-XXS 3” to 4” S-160 6” to 8” S-120
10” to 18” S-100
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
FLANGES 1" and above Class 600 Weldneck RF A182 Gr. F11 Cl. 2, B16.5 (7) BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts
GASKETS Metal grooved gasket with flexible graphite layer is preferred. Or, spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. Inner ring 316
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12
(5)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2" and above Class 600 RF Flanged A217 Gr. WC6, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 600 RF Flanged A182 Gr. F11 Cl. 2 body, BC, Trim No. 10
(5) CHECK VALVE
2" and above Class 600 RF Flanged A217 Gr. WC6 body, BC, Trim No. 10 (5) Notes: Notes (1) through (10) of 10.18.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 212 of 403
10.18.6 Line Class: 209CJ1S
Line Class: 209CJ1S Basic Material: Sour 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT
Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 155.1 143.9 128.6 109.8 77.2 21.5
Item Size Rating Schedule Type Specification Notes
1” to 2” S-160 3” to 18” S-80
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
2½" and under Class 1500 FLANGES 3" and above Class 900
Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (7)
BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal ring, per B16.20
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
3" and above Class 900 RTJ Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing,API 600, Trim No. 12
(5)
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
3" and above Class 900 RTJ Flanged A217 Gr. WC6, BB, OS&Y, graphite packing, Trim No. 12
(5)
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 10
(5) CHECK VALVE
3" and above Class 900 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 10 (5) Notes: Notes (1) through (10) of 10.18.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 213 of 403
10.18.7 Line Class: 209CJ2S
Line Class: 209CJ2S Basic Material: Sour 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT
Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 155.1 143.9 128.6 109.8 77.2 21.5
Item Size Rating Schedule Type Specification Notes
1” to 2” S-160 3” to 18” S-80
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
2½" and under Class 1500 Weldneck RTJ FLANGES 3" and above Class 900 Weldneck RTJ
A182 Gr. F11 Cl. 2, B16.5 (7)
BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal ring, per B16.20
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
3" and above Class 900 RTJ Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
3" and above Class 900 RTJ Flanged A217 Gr. WC6, BB, OS&Y, graphite packing, Trim No. 12
(5)
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 10
(5) CHECK VALVE
3" and above Class 900 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 10 (5) Notes: Notes (1) through (10) of 10.18.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 214 of 403
10.18.8 Line Class: 209CJ4S
Line Class: 209CJ4S Basic Material: Sour 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT
Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 155.1 143.9 128.6 109.8 77.2 21.5
Item Size Rating Schedule Type Specification Notes
1” to 2” S-XXS 3” to 4” S-160 6” to 8” S-120
10” to 18” S-100
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
2½" and under Class 1500 Weldneck RTJ FLANGES 3" and above Class 900 Weldneck RTJ
A182 Gr. F11 Cl. 2, B16.5 (7)
BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal ring, per B16.20
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
3" and above Class 900 RTJ Flanged A217 Gr. WC6 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
3" and above Class 900 RTJ Flanged A217 Gr. WC6, BB, OS&Y, graphite packing, Trim No. 12
(5)
2½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 10
(5) CHECK VALVE
3" and above Class 900 RTJ Flanged A217 Gr. WC6 body, BC, Trim No. 10 (5) Notes: Notes (1) through (10) of 10.18.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 215 of 403
10.18.9 Line Class: 215CJ1S
Line Class: 215CJ1S Basic Material: Sour 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT
Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%X-ray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 258.6 239.8 214.4 183.1 128.6 35.9
Item Size Rating Schedule Type Specification Notes
1” to 18” S-160 Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
FLANGES 1" and above Class 1500 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (7)
BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal ring, per B16.20
1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A217 Gr. WC6, PSB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 1500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 10
(5) CHECK VALVE
2" and above Class 1500 RTJ Flanged A217 Gr. WC6 body, PSC, Trim No. 10
(5)
Notes: Notes (1) through (10) of 10.1.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 216 of 403
10.18.10 Line Class: 225CJ1S
Line Class: 225CJ1S Basic Material: Sour 1.25 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT
Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 430.9 399.6 357.1 304.9 214.4 59.9
Item Size Rating Schedule Type Specification Notes
1” to 6” S-160 8” to 18” calculate
Seamless A335 Gr. P11 (1) (2) PIPE
20” and above calculated Welded A691 Gr. 1.25Cr Cl. 22 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A234 Gr. WP11 Cl. 1 Seamless, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F11 Cl. 2, MSS-SP97
FLANGES 1" and above Class 2500 Weldneck RTJ A182 Gr. F11 Cl. 2, B16.5 (7)
BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal ring, per B16.20
1½" and under Class 2500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No. 12
(5) GATE VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. WC6 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 2500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. WC6, PSB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 2500 RTJ Flanged A182 Gr. F11 Cl. 2 body, WC, Trim No. 10
(5) CHECK VALVE
2" and above Class 2500 RTJ Flanged A217 Gr. WC6 body, PSC, Trim No. 10
(5)
Notes: Notes (1) through (10) of 10.18.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 217 of 403
10.18.11 Line Class: 225CL2S
Line Class: 225CL2S Basic Material: Sour 5 Cr – 0.5 Mo Max. Temperature: 590°C Stress Relief: PWHT
Service: H2 + H2S (not wet) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29.0 250 350 450 550 590 Pressure Rating (bar) (2) 430.9 386.2 335.3 281.8 100.4 60,7
Item Size Rating Schedule Type Specification Notes
Up to 4” S-XXS PIPE 6” to 8” calculate
Seamless A335 Gr. P5 (1) (2)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A234 Gr. WP5 Cl. 1 Seamless, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F5 Cl. 2, MSS-SP97
FLANGES 1" and above Class 2500 Weldneck RTJ A182 Gr. F5 Cl. 2, B16.5 (7)
BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts GASKETS 5 Cr Octagonal ring, per B16.20
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 Cl. 2 body, WB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 Cl. 2 body, WB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A217 Gr. C5, PSB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 2500 RTJ Flanged A182 Gr. F5 Cl. 2 body, WC, Trim No. 10
(5) CHECK VALVE
2" and above Class 2500 RTJ Flanged A217 Gr. C5 body, PSC, Trim No. 10 (5) Notes: Notes (1) through (11) of 10.18.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 218 of 403
10.19 Low and Medium Alloy Steel for Toxic and Benzene (<95% wt) Service Line Classes.
10.19.1 Line Classes Notes
The following Notes shall apply to all of the carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration welds.
(4) Valve leakage
All block valves shall satisfy the following:
• Tightness class: “B” according to ISO-15848, part I, table 1. Test fluid shall be helium (class BH)
• Endurance class: CO2 (1500 cycles)
• Temperature class: 400°C according to ISO-15848, part I, table 3.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance
(10) Surface Roughness shall be < 3.2 μm
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 219 of 403
10.19.2 Line Class: 103CK1X Line Class: 103CK1X Basic Material: 2.25 Cr – 1.0 Mo Max. Temperature: 590°C Stress Relief: PWHT Service: Toxic, Benzene (<95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25
Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: per Code
Temperature (°C) (2) -29.0 200 300 400 500 590 Pressure Rating (bar) (2) 51.7 48.6 42.9 36.5 28.2 8.3
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3” to 4” S-80
6” to 12” S-STD 14” to 16” S-40
18” S-XS
Seamless A335 Gr. P22 (1) (2) PIPE
20" and above calculate Welded A691 Gr. 2.25Cr Cl. 22 (3) 1½" and under Class acc. to B16.11 Socketweld A182 Gr. F22, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234 Gr. WP22 Cl. 1
Seamless/Welded, B16.9 (5)
Nipples, Swages 2" and under Seamless A335 Gr. P22
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A182 Gr. F22 Cl. 3, MSS SP 97
Weldolets 2" and above Buttweld A182 Gr. F22 Cl. 3MSS SP 97 1½" and under Class 300 Sockwd RFS FLANGES 2" and above Class 300 Weldnck RFS
A182 Gr. F22 Cl. 3, B16.5 (8)
BOLTING A193 B16 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts.
GASKETS Metal grooved gasket with flexible graphite layer is preferred. Or, spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. Inner ring 316 (10)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F22 Cl. 3 body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RF Flanged SM
A217 Gr. WC9 body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 8
(6)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F22 Cl. 3 body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged SM
A217 Gr. WC9 body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 8
(6)
1½" and under Class 800 Socketweld with nipples
A182 Gr. F22 Cl. 3 body, BC, Trim No. 1
(6) CHECK VALVES
2" and above Class 300 RF Flanged SM A217 Gr. WC9 body, BC, Trim No. 1 (6)
1½" and under Class 300 Socketweld with nipples
A182 Gr. F22 Cl. 3 body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe
(6) (7)
2" to 4" Class 300 RF Flanged SM
A217 Gr. WC9 body, floating ball, RTFE seats, fire safe, API 6D,Graphite Packing, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 300 RF Flanged SM
A217 Gr. WC9 body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP
(6) (7)
Notes: Notes (1) through (10) of 10.19.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 220 of 403
10.20 Steel for High Temperature Services Line Classes
10.20.1 Line Classes Notes
The following Notes shall apply to all of this high alloys steel class family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Seamless or double-arc welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 221 of 403
10.20.2 Line Class 101LR1T Line Class: 101LR1T Basic Material: Refract. Lined
Carbon Steel Max. Temperature: 770°C Stress Relief: Per Code
Service: High Temperature Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size I.D. Rating
Schedule Type Specification Notes
PIPE Up to 1900 calculate JERES-N-100 A106 Gr. B Refractory lined FITTINGS
El's, Tees,
6" and above Buttweld A234 Gr. WPB Refractory lined (5)
FLANGES 6" and above Class 150 Weldneck RF A105N Refractory lined, B16.5 (8) BOLTING A193 G. B7 stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2H GASKETS Spiral-wound, 304H windings, vermiculite filled with 304H ring, per B16.20. 304H Inner Ring
RF Flanged A182 Gr. F304H body, BB, OS&Y, API 602, Trim No. 304H (6)
GATE VALVES All Class 150 RF Flanged
A351 CF8C body, Wedge type: BB, OS&Y, API 600, Trim 304H
(6)
Notes: Notes (1) through (8) of 10.20.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 222 of 403
10.20.3 Line Class 103LR1T
Line Class: 103LR1T Basic Material: Refract. Lined Carbon Steel Max. Temperature: 770°C Stress Relief: Per Code
Service: High Temperature Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size I.D. Rating Schedule Type Specification Notes
PIPE Up to 1900 calculate JERES-N-100 A106 Gr. B Refractory lined FITTINGS
El's, Tees,
6" and above Buttweld A234 Gr. WPB Refractory lined (5)
FLANGES 6" and above Class 300 Weldneck RF A105N Refractory lined, B16.5 (8) BOLTING A193 G. B7 stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2H GASKETS Spiral-wound, 304H windings, vermiculite filled with 304H ring, per B16.20. 304H Inner Ring
RF Flanged A182 Gr. F304H body, BB, OS&Y, API 602, Trim No. 304H (6)
GATE VALVES All Class 300 RF Flanged
A351 CF8C body, Wedge type: BB, OS&Y, API 600, Trim 304H
(6)
Notes: Notes (1) through (8) of 10.20.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 223 of 403
10.21 Stainless Steel for Process Service Line Classes
10.21.1 Line Classes Notes
The following Notes shall apply to all of this stainless steel class family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Seamless or double-arc welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.
(10) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 224 of 403
10.21.2 Line Class: 101SA0P
Line Class: 101SA0P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.2 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification
Notes
Up to 6" S-40S
Seamless
A312 Gr. TP304/304L (1) (2) PIPE
8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)
1½” and under Socketweld/ Threaded A182 Gr. F304/304L, B16.11 (5) FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)
Nipples and Swage 2” and under Seamless A312 Gr. TP304/304L Sockolets/
Threadolets 1½” and under Socketweld/ Threaded A182 Gr. F304/304L, MSS-SP97 (4)
Weldolets 2” and above Buttweld A182 Gr. F304/304L, MSS-SP97
1½” and under Class 150 Socketweld RF A182 Gr. F304/304L, B16.5
FLANGES 2” and above Class 150 Weldneck RF A182 Gr. F304/304L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-w., 316 SS windings, flex graphite filled with CS outer ring and SS 316 inner ring per B16.20.
1½” and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing, API 602,Trim No. 12 (6)
GATE VALVES 2” and above Class 150 RF Flanged
A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing,Trim No. 12 (6)
GLOBE VALVES 2” and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite
packing, Trim No. 12 (6)
1½” and under Class 800 Socketweld/ Threaded A182 Gr. F304/304L body, BC, Trim No. 10 (6) CHECK VALVES
2” and above Class 150 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10 (6)
1½” and under Class 300 Socketweld/ Threaded
A182-F304/304L body, floating ball, RTFE seats, Trim No. 10, fire safe (6)
2” to 4” Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (7) BALL VALVES
6” and above Class 150 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6) (7)
1½” and under Class 600 Socketweld/ Threaded
A182-F304L/304 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6) PLUG VALVES
2” and above Class 150 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced,API 599, Trim SS 316 (6)
BUTTERFLY VALVES 4” and above Class 150 Lugged or RF
Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 225 of 403
10.21.3 Line Class: 101SA1P
Line Class: 101SA1P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.2 12.1 8.4 4.6 1.4
Notes Notes (1) through (10) of 10.21.1 shall apply.
Item Size Rating Schedule Type Specification
Notes
Up to 6"
Seamless
A312 Gr. TP304/304L (1)
(2) PIPE
8" and above Welded A358 Gr. 304/304L Cl. 1 (3)
1½" and under 3000 Socketweld/ Threaded A182 Gr. F304/304L, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP304/304L Sockolets/
Threadolets 1½" and under Socketweld/ Threaded A182 Gr. F304/304L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F304/304L, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F304/304L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-w., 316 SS windings, flex graphite filled with CS outer ring and SS 316 inner ring per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing, API 602,Trim No. 12 (6)
GATE VALVES 2" and above Class 150 RF Flanged
A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing,Trim No. 12 (6)
GLOBE VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite
packing, Trim No. 12 (6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304/304L body, BC, Trim No. 10 (6) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld/ Threaded
A182-F304/304L body, floating ball, RTFEseats,Trim No. 10, fire safe (6) (7)
2" to 4" Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (7) BALL VALVES
6" and above Class 150 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F304L/304 body, lubricated, inverted pressure balanced, BC,Trim SS 316
(6) PLUG VALVES
2" and above Class 150 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced,API 599, Trim SS 316 (6)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 226 of 403
10.21.4 Line Class: 103SA0P Line Class: 103SA0P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Item Size Rating Schedule Type Specification Notes
Up to 6" S-40S
Seamless
A312 Gr. TP304/304L (1) (2) PIPE
8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)
1½" and under
3000
Socketweld/ Threaded A182 Gr. F304/304L, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP304/304L Sockolets/
Threadolets 1½" and under Socketweld/ Threaded A182 Gr. F304/304L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F304/304L, B16.5
FLANGES 2" and above Class 300 Weldneck RF A182 Gr. F304/304L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing, API 602,Trim No. 12 (6)
GATE VALVES 2" and above Class 300 RF Flanged
A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing,Trim No. 12 (6)
GLOBE VALVES 2" and above Class 300 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite
packing, Trim No. 12 (6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304/304L body, BC, Trim No. 10 (6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, BC, Trim No.10 (6)
1½" and under Class 300 Socketweld/ Threaded
A182-F304/304L body, floating ball, RTFE seats,Trim No. 10, fire safe (6) (7)
2" to 4" Class 300 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6) (7) BALL VALVES
6" and above Class 300 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10 (6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F304L/304 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6)
PLUG VALVES
2" and above Class 300 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 300 Lugged or RF
Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 227 of 403
10.21.5 Line Class: 103SA1P
Line Class: 103SA1P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Item Size Rating Schedule Type Specification Notes
Up to 6"
Seamless
A312 Gr. TP304/304L (1)
(2) PIPE
8" and above Welded A358 Gr. 304/304L Cl. 1 (3)
1½" and under
3000
Socketweld/ Threaded A182 Gr. F304/304L, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP304/304L Sockolets/
Threadolets 1½" and under Socketweld/ Threaded A182 Gr. F304/304L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F304/304L, B16.5
FLANGES 2" and above Class 300 Weldneck RF A182 Gr. F304/304L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing, API 602, Trim No.12 (6)
GATE VALVES 2" and above Class 300 RF Flanged
A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing,Trim No. 12 (6)
GLOBE VALVES 2" and above Class 300 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite
packing, Trim No. 12 (6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304/304L body, BC, Trim No. 10 (6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, BC,Trim No. 10 (6)
1½" and under Class 300 Socketweld/ Threaded
A182-F304/304L body, floating ball, RTFE seats, Trim No. 10, fire safe (6) (7)
2" to 4" Class 300 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6)(7) BALL VALVES
6" and above Class 300 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10 (6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F304L/304 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6)
PLUG VALVES
2" and above Class 300 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 300 Lugged or RF
Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 228 of 403
10.21.6 Line Class: 106SA1P
Line Class: 106SA1P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 99.3 74.0 65.0 59.3 54.8 48.9
Item
Size
Rating Schedule
Type
Specification
Notes
Up to 6" S-40S
Seamless
A312 Gr. TP304/304L (1) (2)
8" to 24” S-40S
PIPE
26” and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)
1½" and under
Socketweld/ Threaded A182 Gr. F304/304L, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP304/304L Sockolets/
Threadolets 1½" and under Socketweld/ Threaded A182 Gr. F304/304L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F304/304L, B16.5
FLANGES 2" and above Class 600 Weldneck RF A182 Gr. F304/304L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing,API 602, Trim No. 12 (6)
GATE VALVES 2" and above Class 600 RF Flanged A351 Gr. CF8M body, BB, OS&Y,
graphite packing, API 600, Trim No. 12 (6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing,Trim No. 12 (6)
GLOBE VALVES 2" and above Class 600 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite
packing, Trim No. 12 (6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304/304L body, BC, Trim No. 10 (6) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8M body, BC, Trim No.10 (6)
1½" and under Class 600 Socketweld/ Threaded
A182-F304/304L body, floating ball, RTFE seats, Trim No. 10, fire safe (6) (7)
2" to 4" Class 600 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6) (7) BALL VALVES
6" and above Class 600 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10 (6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F304L/304 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6)
PLUG VALVES
2" and above Class 600 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 600 Lugged or RF
Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 229 of 403
10.21.7 Line Class: 209SA1P
Line Class: 209SA1P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 148.9 111.0 97.5 88.9 82.2 73.3
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 6" S-40S
Seamless
A312 Gr. TP304/304L (1) (2)
PIPE 8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)
1½" and under
Socketweld A182 Gr. F304/304L, B16.11 (5) FITTINGS El's Tees,
Reducers, Caps, Couplings etc. 2" and above Buttweld A403 Gr. WP304/304L
Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP304/304L
Sockolets 1½" and under Socketweld A182 Gr. F304/304L, MSS-SP97 Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97
2½" and under Class 1500 Weldneck RTJ A182 Gr. F304/304L, B16.5 FLANGES
3" and above Class 900 Weldneck RTJ A182 Gr. F304/304L, B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS 316 SS octagonal ring
2½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WB, OS&Y, graphite packing,API 602, Trim No. 12
(6)
GATE VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
2½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
2½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WC, Trim No. 10
(6) CHECK VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8M body, BC, Trim No.10 (6) Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 230 of 403
10.21.8 Line Class: 225SA1P
Line Class: 225SA1P Basic Material: SS 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 413.7 308.4 270.7 246.9 228.4 203.6
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 6" calculate
Seamless
A312 Gr. TP304/304L (1) (2) PIPE
8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3) FITTINGS El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F304/304L, MSS-SP97
FLANGES 1" and above Class 2500 Weldneck RTJ A182 Gr. F304/304L, B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS 316 SS octagonal ring
1½" and under Class 2500 RTJ Flanged A182 Gr. F304/304L body, WB, OS&Y, graphite packing,API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8M body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 2500 RTJ Flanged A182 Gr. F304/304L body, WB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8M, PSB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 2500 RTJ Flanged A182 Gr. F304/304L body, WC, Trim No. 10
(6) CHECK VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8M body, PSC, Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 231 of 403
10.21.9 Line Class: 101SC0P
Line Class: 101SC0P Basic Material: SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.2 12.1 8.4 4.6 1.4
Notes Notes (1) through (10) of 10.21.1 shall apply.
Item Size Rating Schedule Type Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304H (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304H Cl. 1 (3)
1½" and under Class. acc. to B16.11
Socketweld/ Threaded A182 Gr. F304H, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304H Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP304H Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F304H, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304H, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F304H, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F304H, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304H body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8 body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld/ Threaded
A182-F304H body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2" to 4" Class 150 RF Flanged A351-CF8 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (7) BALL VALVES
6" and above Class 150 RF Flanged A351-CF8 body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F304H body, lubricated, inverted pressure balanced, BC,Trim SS 316
(6) PLUG VALVES
2" and above Class 150 RF Flanged A351-CF8 body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A351-CF8 body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 232 of 403
10.21.10 Line Class: 101SC1P
Line Class: 101SC1P Basic Material: SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.2 12.1 8.4 4.6 1.4
Notes Notes (1) through (10) of 10.21.1 shall apply.
Item Size Rating Schedule Type Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304H (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304H Cl. 1 (3)
1½" and under Class. acc. to B16.11
Socketweld/ Threaded A182 Gr. F304H, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304H Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP304H Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F304H, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304H, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F304H, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F304H, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304H body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8 body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld/ Threaded
A182-F304H body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2" to 4" Class 150 RF Flanged A351-CF8 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (7) BALL VALVES
6" and above Class 150 RF Flanged A351-CF8 body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F304H body, lubricated, inverted pressure balanced, BC,Trim SS 316
(6) PLUG VALVES
2" and above Class 150 RF Flanged A351-CF8 body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A351-CF8 body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 233 of 403
10.21.11 Line Class: 103SC0P
Line Class: 103SC0P Basic Material: SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Notes Notes (1) through (10) of 10.21.1 shall apply.
Item Size Rating Schedule Type Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304H (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304H Cl. 1 (3)
1½" and under Class. acc. to B16.11
Socketweld/ Threaded A182 Gr. F304H, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304H Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP304H Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F304H, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304H, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F304H, B16.5
FLANGES 2" and above Class 300 Weldneck RF A182 Gr. F304H, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6) GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304H body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 300 RF Flanged A351 Gr. CF8 body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld/ Threaded
A182-F304H body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2" to 4" Class 300 RF Flanged A351-CF8 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (7) BALL VALVES
6" and above Class 300 RF Flanged A351-CF8 body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F304H body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6) PLUG VALVES
2" and above Class 300 RF Flanged A351-CF8 body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 300 Lugged or RF
Flanged A351-CF8 body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 234 of 403
10.21.12 Line Class: 103SC1P
Line Class: 103SC1P Basic Material: SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Notes Notes (1) through (10) of 10.21.1 shall apply.
Item Size Rating Schedule Type Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304H (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304H Cl. 1 (3)
1½" and under Class. acc. to B16.11
Socketweld/ Threaded A182 Gr. F304H, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304H Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP304H Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F304H, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304H, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F304H, B16.5
FLANGES 2" and above Class 300 Weldneck RF A182 Gr. F304H, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6) GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304H body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 300 RF Flanged A351 Gr. CF8 body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld/ Threaded
A182-F304H body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2" to 4" Class 300 RF Flanged A351-CF8 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 300 RF Flanged A351-CF8 body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F304H body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6) PLUG VALVES
2" and above Class 300 RF Flanged A351-CF8 body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 300 Lugged or RF
Flanged A351-CF8 body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 235 of 403
10.21.13 Line Class: 106SC1P
Line Class: 106SC1P Basic Material: SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Notes Notes (1) through (10) of 10.21.1 shall apply.
Item Size Rating Schedule Type Specification
Notes Up to 2" S-40S
4” to 6” S-10S as minimum
Seamless
A312 Gr. TP304H (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304H Cl. 1 (3)
1½" and under Class. acc. to B16.11
Socketweld/ Threaded A182 Gr. F304H, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304H Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP304H Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F304H, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304H, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F304H, B16.5
FLANGES 2" and above Class 600 Weldneck RF A182 Gr. F304H, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304H body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 600 RF Flanged A351 Gr. CF8 body, BC, Trim No. 10 (6)
1½" and under Class 600 Socketweld/ Threaded
A182-F304H body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2" to 4" Class 600 RF Flanged A351-CF8 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 600 RF Flanged A351-CF8 body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F304H body, lubricated, inverted pressure balanced, BC,Trim SS 316
(6) PLUG VALVES
2" and above Class 600 RF Flanged A351-CF8 body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 600 Lugged or RF
Flanged A351-CF8 body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 236 of 403
10.21.14 Line Class: 101SD0P
Line Class: 101SD0P Basic Material: SS 316/316L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316/316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316/316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316/316L Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP316/316L Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F316/316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316/316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316/316L, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F316/316L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,API 602, Trim No. 12
(6) GATE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316/316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC,Trim No. 10 (6) 1½" and under Class 300 Socketweld/
Threaded A182-F316/316L body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2" to 4" Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10
(6) (7) BALL VALVES
6" and above Class 150 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F316L/316 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6)
PLUG VALVES
2" and above Class 150 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B, Trim No. 10
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 237 of 403
10.21.15 Line Class: 101SD1P
Line Class: 101SD1P Basic Material: SS 316/316L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316/316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316/316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316/316L Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP316/316L Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F316/316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316/316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316/316L, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F316/316L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,API 602, Trim No. 12
(6) GATE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316/316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC,Trim No. 10 (6) 1½" and under Class 300 Socketweld/
Threaded A182-F316/316L body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2" to 4" Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6) (7) BALL VALVES
6" and above Class 150 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10 (6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F316L/316 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6)
PLUG VALVES
2" and above Class 150 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 238 of 403
10.21.16 Line Class: 103SD0P
Line Class: 103SD0P Basic Material: SS 316/316L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 38.5 33.4 30.3 28.8 25.2
Item Size Rating Schedule Type Specification Notes
Up to 2” S-40S 4” to 6” S-10S
Seamless A32 Gr. TP316/316L (1) (2) PIPE
8” and above S-10S as minimum Welded A358 Gr. 316/316L Cl. 1 (3)
1½” and under
Class acc. To
B16.11
Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (5) FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A403 Gr. WP316/316L
Seamless/Welded, B16.9 (5)
Nipples and Swage 2” and under Seamless A312 Gr. TP316/316L Sockolets/
Threadolets 1½” and under Class acc. To MSS SP97
Socketweld/ Threaded A182 Gr. F316/316L, MSS-SP97 (4)
Weldolets 2” and above Buttweld A182 Gr. F316/316L, MSS-SP97
1½” and under Class 300 Socketweld RF A182 Gr. F316/316L, B16.5
FLANGES 2” and above Class 300 Weldneck RF A182 Gr. F316/316L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,API 602, Trim No. 12
(6) GATE VALVES
2” and above Class 300 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½” and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2” and above Class 300 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½” and under Class 800 Socketweld/ Threaded
A182 Gr. F316/316L body, BC, Trim No. 10
(6) CHECK VALVES
2” and above Class 300 RF Flanged A351 Gr. CF8M body, BC,Trim No. 10 (6) 1½” and under Class 300 Socketweld/
Threaded A182-F316/316L body, floating ball, RTFE seats, Trim No. 10, fire safe
(6)
2” to 4” Class 300 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6) BALL VALVES
6” and above Class 300 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10 (6)
1½” and under Class 600 Socketweld/ Threaded
A182-F316L/316 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6)
PLUG VALVES
2” and above Class 300 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4” and above Class 300 Lugged or RF
Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 239 of 403
10.21.17 Line Class: 103SD1P
Line Class: 103SD1P Basic Material: SS 316/316L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 38.5 33.4 30.3 28.8 25.2
Item Size Rating Schedule Type Specification Notes
Up to 6" S-40S Seamless A312 Gr. TP316/316L (1) (2)
8” to 12” S-40S PIPE
14" and above S-20 Welded A358 Gr. 316/316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316/316L Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP316/316L Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F316/316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316/316L, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F316/316L, B16.5
FLANGES 2" and above Class 300 Weldneck RF A182 Gr. F316/316L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,API 602, Trim No. 12
(6) GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316/316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr.CF8M body, BC, Trim No. 10 (6) 1½" and under Class 300 Socketweld/
Threaded A182-F316/316L body, floating ball, RTFE seats, Trim No. 10, fire safe (6)
2" to 4" Class 300 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6) BALL VALVES
6" and above Class 300 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6)
1½" and under Class 600 Socketweld/ Threaded
A182-F316L/316 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6)
PLUG VALVES
2" and above Class 300 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
BUTTERFLY VALVES 4" and above Class 300 Lugged or RF
Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 240 of 403
10.21.18 Line Class: 106SD0P
Line Class: 106SD0P Basic Material: SS 316/316L Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 99.3 115.5 100.1 91.0 86.5 75.2
Item Size Rating Schedule Type Specification Notes
Up to 6" Seamless A312 Gr. TP316/316L (1)
(2) PIPE 8" and above Welded A358 Gr. 316/316L Cl. 1 (3)
1½" and under
Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316/316L Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP316/316L Sockolets/
Threadolets 1½" and under Socketweld/ Threaded A182 Gr. F316/316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316/316L, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F316/316L, B16.5
FLANGES 2" and above Class 600 Weldneck RF A182 Gr. F316/316L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316/316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10
(6)
1½" and under Class 600 Socketweld/ Threaded
A182-F316/316L body, floating ball, RTFE seats, Trim No. 10, fire safe
(6)
2" to 4" Class 600 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) BALL VALVES
6" and above Class 600 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6)
PLUG VALVES 1½" and under Class 600 Socketweld/ Threaded
A182-F316L/316 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6)
2" and above Class 600 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
BUTTERFLY VALVES
4" and above Class 600 Lugged or RF Flanged
A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 241 of 403
10.21.19 Line Class: 101SR0P
Line Class: 101SR0P Basic Material: SS 304 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.2 12.1 8.4 4.6 1.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304 (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304 Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F304, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304 Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP304
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F304, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F304, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F304, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304 body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, Trim No.
10 (6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 242 of 403
10.21.20 Line Class: 101SR1P
Line Class: 101SR1P Basic Material: SS 304 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.2 12.1 8.4 4.6 1.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304 (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304 Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F304, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304 Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP304
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F304, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F304, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F304, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304 body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, Trim No.
10 (6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 243 of 403
10.21.21 Line Class: 103SR0P
Line Class: 103SR0P Basic Material: SS 304 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304 (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304 Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F304, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304 Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP304
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F304, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F304, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F304, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 300 RF Flanged
A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304 body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 300 RF Flanged A351 Gr. CF8M body, BC, Trim No.
10 (6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 244 of 403
10.21.22 Line Class: 101SS1P
Line Class: 101SS1P Basic Material: SS 304L Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 100 200 300 375 425 Pressure Rating (bar) (2) 15.9 13.3 11.2 10.0 7.4 5.5
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F304L, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304L Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP304L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F304L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F304L, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F304L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF3 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3 body, BC, Trim No. 10 (6) Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 245 of 403
10.21.23 Line Class: 103SS0P
Line Class: 103SS0P Basic Material: SS 304L Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 100 200 300 375 425 Pressure Rating (bar) (2) 41.4 34.8 29.2 26.1 24.8 23.9
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F304L, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304L Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP304L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F304L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304L, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F304L, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F304L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 300 RF Flanged
A351 Gr. CF3 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF3, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF3 body, BC, Trim No. 10 (6) Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 246 of 403
10.21.24 Line Class: 103SS1P Line Class: 103SS1P Basic Material: SS 304L Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 100 200 300 375 425 Pressure Rating (bar) (2) 41.4 34.8 29.2 26.1 24.8 23.9
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 6" S-40S
Seamless
A312 Gr. TP304L (1) (2)
8” to 12” S-40S 14" to 24” S-20
PIPE
26” and above” calculate Welded A358 Gr. 304L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F304L, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304L Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP304L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F304L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304L, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F304L, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F304L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 300 RF Flanged
A351 Gr. CF3 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF3, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF3 body, BC, Trim No. 10 (6) Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 247 of 403
10.21.25 Line Class: 106SS1P
Line Class: 106SS1P Basic Material: SS 304L Max. Temperature: 425°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 100 200 300 375 425 Pressure Rating (bar) (2) 82.7 69.6 58.3 52.1 49.5 47.7
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 6" S-40S
Seamless
A312 Gr. TP304L (1) (2)
8” to 24” S-40S PIPE
26” and above” calculate Welded A358 Gr. 304L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F304L, B16.11 ()
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304L Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP304L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F304L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304L, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F304L, B16.5 FLANGES
2" and above Class 600 Weldneck RF A182 Gr. F304L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 600 RF Flanged
A351 Gr. CF3 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF3, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF3 body, BC, Trim No. 10 (6) Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 248 of 403
10.21.26 Line Class: 101SU0P
Line Class: 101SU0P Basic Material: SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 100 200 300 375 450 Pressure Rating (bar) (2) 15.9 13.3 11.2 10.0 7.4 4.6
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 249 of 403
10.21.27 Line Class: 101SU1P
Line Class: 101SU1P Basic Material: SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 100 200 300 375 450 Pressure Rating (bar) (2) 15.9 13.3 11.2 10.0 7.4 4.6
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 250 of 403
10.21.28 Line Class: 103SU0P
Line Class: 103SU0P Basic Material: SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 100 200 300 375 450 Pressure Rating (bar) (2) 41.4 34.8 29.2 26.1 24.8 23.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 300 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 251 of 403
10.21.29 Line Class: 103SJ1P
Line Class: 103SJ1P Basic Material: SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 49.6 44.2 38.3 34.1 31.6 25.2
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S
3” to 6” S-40S
Seamless
A312 Gr. TP321 (1)
(2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
1½" and under
Class. acc. to
B16.11
Socketweld/ Threaded A182 Gr. F321, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP321
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F321, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F321, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F321, B16.5
FLANGES 2" and above Class 300 Weldneck RF A182 Gr. F321, B16.5
(8) BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS Spiral-wound, 321 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½" and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
1½" and under Class 800
Socketweld
A182 Gr. F321 body, BC, Trim 321/347
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C body, BC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 252 of 403
10.21.309 Line Class: 103SJ2P
Line Class: 103SJ2P Basic Material: SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 49.6 44.2 38.3 34.1 31.6 25.2
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S
3” to 6” S-40S
Seamless
A312 Gr. TP321 (1)
(2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
1½" and under
Class. acc. to
B16.11
Socketweld/ Threaded A182 Gr. F321, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP321
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F321, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F321, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F321, B16.5
FLANGES 2" and above Class 300 Weldneck RF A182 Gr. F321, B16.5
(8) BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS Spiral-wound, 321 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½" and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
1½" and under Class 800
Socketweld
A182 Gr. F321 body, BC, Trim 321/347
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C body, BC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 253 of 403
10.21.31 Line Class: 106SJ1P
Line Class: 106SJ1P Basic Material: SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 99.3 88.5 76.6 68.3 63.2 50.0
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2” S-80S
3” to 6” S-40S
Seamless
A312 Gr. TP321 (1)
(2)
8” to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
1½” and under
Class. Acc. To
B16.11
Socketweld/ Threaded A182 Gr. F321, B16.11 (5)
FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Nipples and Swages 2” and under Seamless A312 Gr. TP321
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP97 Socketweld/
Threaded A182 Gr. F321, MSS-SP97 (4)
Weldolets 2” and above Buttweld A182 Gr. F321, MSS-SP97
1½” and under Class 600 Socketweld RF A182 Gr. F321, B16.5
FLANGES 2” and above Class 600 Weldneck RF A182 Gr. F321, B16.5
(8) BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS Spiral-wound, 321 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½” and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2” and above Class 600 RF Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½” and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2” and above Class 600 RF Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
1½” and under Class 800
Socketweld
A182 Gr. F321 body, BC, Trim 321/347
(6) CHECK VALVES
2” and above Class 600 RF Flanged A351 Gr. CF8C body, BC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 254 of 403
10.21.32 Line Class: 206SJ1P
Line Class: 206SJ1P Basic Material: SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 600 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 99.3 88.5 76.6 68.3 63.2 50.0
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2” S-80S
3” to 6” S-40S
Seamless
A312 Gr. TP321 (1)
(2)
8” to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
1½” and under
Class. Acc. To
B16.11
Socketweld/ Threaded A182 Gr. F321, B16.11 (5)
FITTINGS
El’s Tees, Reducers, Caps,
Couplings etc. 2” and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Nipples and Swages 2” and under Seamless A312 Gr. TP321
Sockolets/ Threadolets 1½” and under Class acc. To MSS
SP97 Socketweld/
Threaded A182 Gr. F321, MSS-SP97 (4)
Weldolets 2” and above Buttweld A182 Gr. F321, MSS-SP97
1½” and under Class 600 Socketweld RTJ A182 Gr. F321, B16.5
FLANGES 2” and above Class 600 Weldneck RTJ A182 Gr. F321, B16.5
(8) BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS 321 SS octagonal ring, B16.20
1½” and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2” and above Class 600 RTJ Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½” and under Class 800 Socketweld A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2” and above Class 600 RTJ Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
1½” and under Class 800
Socketweld
A182 Gr. F321 body, BC, Trim 321/347
(6) CHECK VALVES
2” and above Class 600 RTJ Flanged A351 Gr. CF8C body, BC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 255 of 403
10.21.33 Line Class: 209SJ1P
Line Class: 209SJ1P Basic Material: SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 148.9 111.0 97.5 88.9 82.2 73.3
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 6" S-40S
Seamless
A312 Gr. TP321 (1) (2)
PIPE 8" and above calculate Welded A358 Gr. 321 Cl. 1 (3)
1½" and under
Socketweld A182 Gr. F321, B16.11 FITTINGS El's Tees,
Reducers, Caps, Couplings etc. 2" and above Buttweld A403 Gr. WP321
Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP321
Sockolets 1½" and under Socketweld A182 Gr. F321L, MSS-SP97 Weldolets 2" and above Buttweld A182 Gr. F321, MSS-SP97
2½" and under Class 1500 Weldneck RTJ A182 Gr. F321, B16.5 FLANGES
3" and above Class 900 Weldneck RTJ A182 Gr. F321, B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS 316 SS octagonal ring
2½" and under Class 1500 Socketweld A182 Gr. F321 body, WB, OS&Y, graphite packing,API 602, Trim 321/347
(6)
GATE VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
2½" and under Class 1500 Socketweld A182 Gr. F321 body, WB, OS&Y, graphite packing,Trim 321/347
(6) GLOBE VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
2½" and under Class 1500 Socketweld A182 Gr. F321 body, WC, Trim 321/347
(6) CHECK VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8C body, BC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 256 of 403
10.21.34 Line Class: 215SJ1P
Line Class: 215SJ1P Basic Material: SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 248.2 221.2 191.5 170.7 157.9 125.5
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 6" S-80S
Seamless
A312 Gr. TP321 (1) (2)
8" to 18” S-100 PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
1½" and under
Class. acc. to
B16.11
Socketweld/ Threaded A182 Gr. F321, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP321
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F321, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F321, MSS-SP97
FLANGES 1” and above Class 1500 Weldneck RTJ A182 Gr. F321, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS 321 SS octagonal ring, B16.20
1½" and under Class 1500 Socketweld A182 Gr. F321 body, WB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2" and above Class 1500 RTJ Flanged A351 Gr. CF8C body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½" and under Class 1500 Socketweld A182 Gr. F321 body, WB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A351 Gr. CF8C, PSB, OS&Y, graphite packing, Trim 321/347
(6)
1½" and under Class 1500
Socketweld
A182 Gr. F321 body, WC, Trim 321/347
(6) CHECK VALVES
2" and above Class 1500 RTJ Flanged A351 Gr. CF8C body, PSC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 257 of 403
10.21.35 Line Class: 103SP1P
Line Class: 103SP1P Basic Material: Duplex S32205 Max. Temperature: 316°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 100 150 200 300 316 Pressure Rating (bar) (2) 51.7 50.7 45.9 42.7 38.9 38..5
Item
Size Rating
Schedule
Type
Specification
Notes
PIPE ¾” and above To calculate Seamless
or Welded
A790 Gr. UNS S32205 (1) (2)
1½" and under
Class acc. to B16.11
Socketweld A182 Gr. F51, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc. 2" and above Buttweld A815 Gr. UNS S32205
Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A790 Gr. UNS S32205
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F51, MSS SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F51, MSS-SP97
1½" and under Class 300 Socketweld RF FLANGES
All Class 300 Weldneck RF A182 Gr. F51, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Spiral-wound, S32205 windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1 1/2 " and under Class 800 Socketweld A182 Gr. F51 body, BB, OS&Y, graphite packing, API 602, Trim 2205/HF
(6)
GATE VALVES
2" and above Class 300 RF Flanged A928 Gr. UNS S32205 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 2205/HF
(6)
1 1/2 " and under Class 800 Socketweld A182 Gr. F51 body, BB, OS&Y, graphite packing, Trim 2205/HF
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A928 Gr. UNS S32205, OS&Y, graphite packing, Trim 2205/HF
(6)
1 1/2 " and under Class 800 Socketweld A182 Gr. F51 body, BC, Trim 2205/HF
(6) CHECK VALVES
2" and above Class 300 RF Flanged A928 Gr. UNS S32205 body, BC, Trim 2205/HF
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 258 of 403
10.21.36 Line Class: 215SP1P
Line Class: 215SP1P Basic Material: Duplex S32205 Max. Temperature: 316°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -40 100 150 200 300 316 Pressure Rating (bar) (2) 258.6 253.3 229.6 213.3 194.3 192.1
Item
Size Rating
Schedule
Type
Specification
Notes
PIPE ¾” and above Seamless
or Welded
A790 Gr. UNS S32205 (1) (2)
1½" and under
Socketweld A182 Gr. F51, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc. 2" and above Buttweld A815 Gr. UNS S32205
Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A790 Gr. UNS S32205
Sockolets/ Threadolets 1½" and under Socketweld/
Threaded A182 Gr. F51, MSS SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F51, MSS-SP97 FLANGES All Class 1500 Weldneck RTJ A182 Gr. F51, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts GASKETS Octagonal Ring 2205 SS B16.20.
1 1/2 " and under Class 1500 Socketweld A182 Gr. F51 body, BB, OS&Y, graphite packing, API 602, Trim 2205/HF
(6)
GATE VALVES
2" and above Class 1500 RTJ Flanged A928 Gr. UNS S32205 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 2205/HF
(6)
1 1/2 " and under Class 1500 Socketweld A182 Gr. F51 body, BB, OS&Y, graphite packing, Trim 2205/HF
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A928 Gr. UNS S32205, OS&Y, graphite packing, Trim 2205/HF
(6)
1 1/2 " and under Class 1500 Socketweld A182 Gr. F51 body, BC, Trim 2205/HF
(6) CHECK VALVES
2" and above Class 1500 RTJ Flanged A928 Gr. UNS S32205 body, BC, Trim 2205/HF
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 259 of 403
10.21.37 Line Class: 101ST1P
Line Class: 101ST1P Basic Material: SS 316 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.8 12.1 8.4 4.6 1.4
Notes Notes (1) through (10) of 10.21.1 shall apply.
Item Size Rating Schedule Type Specification
Notes
Up to 6"
Seamless
A312 Gr. TP316 (1)
(2) PIPE
8" and above Welded A358 Gr. 316 Cl. 1 (3)
1½" and under 3000 Socketweld/ Threaded A182 Gr. F316, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316 Seamless/Welded, B16.9 (5)
Nipples and Swage 2" and under Seamless A312 Gr. TP316 Sockolets/
Threadolets 1½" and under Socketweld/ Threaded A182 Gr. F316, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F316, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-w., 316 SS windings, flex graphite filled with CS outer ring and SS 316 inner ring per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316 body, BB, OS&Y, graphite packing, API 602,Trim No. 12
(6) GATE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316 body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F316 body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10 (6)
1½" and under Class 300 Socketweld/ Threaded
A182-F316 body, floating ball, RTFE seats,Trim No. 10, fire safe
(6) (7)
2" to 4" Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6) (7) BALL VALVES
6" and above Class 150 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10
(6) (7)
1½" and under Class 600 Socketweld/ Threaded
A182-F316 body, lubricated, inverted pressure balanced, BC,Trim SS 316
(6) PLUG VALVES
2" and above Class 150 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced,API 599, Trim SS 316
(6) BUTTERFLY
VALVES 4" and above Class 150 Lugged or RF Flanged
A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 260 of 403
10.21.38 Line Class: 103ST1P
Line Class: 103ST1P Basic Material: SS 316 Max. Temperature: 538°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 38.5 33.4 30.3 28.8 25.2
Item Size Rating Schedule Type Specification Notes
Up to 6" S-40S
Seamless
A312 Gr. TP316 (1) (2)
8” to 12” S-40S 14" to 24” S-20
PIPE
26” and above” calculate Welded A358 Gr. 316 Cl. 1 (3)
1½" and under
Socketweld/ Threaded A182 Gr. F316, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316/Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A312 Gr. TP316
Sockolets/ Threadolets 1½" and under Socketweld/
Threaded A182 Gr. F316, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F316, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F316, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316 body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316 body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 261 of 403
10.21.39 Line Class: 106SU0P Line Class: 106SU0P Basic Material: SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Process & Utility Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 100 200 300 375 450 Pressure Rating (bar) (2) 82.7 69.6 58.3 52.1 49.5 46.8
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S
4” to 6” S-40S
Seamless
A312 Gr. TP316L (1)
(2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 600 Weldneck RF A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 600 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.21.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 262 of 403
10.22 Stainless Steel for Sour Service Line Classes
10.22.1 Line Classes Notes
The following Notes shall apply to all of this stainless steel class family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(5) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(6) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(7) Flanges
Refer to JERES-L-109 for flange material selection.
(7) Piping material shall be furnished in accordance with the requirements of JERES-A-301.
(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance
(10) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.
(11) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 263 of 403
10.22.2 Line Class: 101SC0S
Line Class: 101SC0S Basic Material: Sour SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -48 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.2 12.1 8.4 4.6 1.4
Notes Notes (1) through (11) of 10.22.1 shall apply.
Item Size Rating Schedule Type Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304H (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304H Cl. 1 (3)
1½" and under Class. acc. to B16.11
Socketweld/ Threaded A182 Gr. F304H, B16.11 (4) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304H Seamless/Welded, B16.9 (4)
Nipples and Swage 2" and under Seamless A312 Gr. TP304H Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F304H, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304H, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F304H, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F304H, B16.5
(7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing, API 602,Trim No. 12 (5)
GATE VALVES 2" and above Class 150 RF Flanged
A351 Gr. CF8 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304H body, BC, Trim No. 10 (5)
CHECK VALVES 2" and above Class 150 RF Flanged A351 Gr. CF8 body, BC, Trim No. 10 (5)
1½" and under Class 300 Socketweld/ Threaded
A182-F304H body, floating ball, RTFE seats,Trim No. 10, fire safe (6) (5)
2" to 4" Class 150 RF Flanged A351-CF8 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6) (5) BALL VALVES
6" and above Class 150 RF Flanged A351-CF8 body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6) (5)
1½" and under Class 600 Socketweld/ Threaded
A182-F304H body, lubricated, inverted pressure balanced, BC,Trim SS 316
(5) PLUG VALVES
2" and above Class 150 RF Flanged A351-CF8 body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A351-CF8 body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 264 of 403
10.22.3 Line Class: 103SC0S
Line Class: 103SC0S Basic Material: Sour SS 304H Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Notes Notes (1) through (11) of 10.22.1 shall apply.
Item Size Rating Schedule Type Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304H (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304H Cl. 1 (3)
1½" and under Class. acc. to B16.11
Socketweld/ Threaded A182 Gr. F304H, B16.11 (4) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304H Seamless/Welded, B16.9 (4)
Nipples and Swage 2" and under Seamless A312 Gr. TP304H Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F304H, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304H, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F304H, B16.5
FLANGES 2" and above Class 300 Weldneck RF A182 Gr. F304H, B16.5
(7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts GASKETS Spiral-wound, 304H SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing, API 602,Trim No. 12
(5) GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304H body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded A182 Gr. F304H body, BC, Trim No. 10 (5)
CHECK VALVES 2" and above Class 300 RF Flanged A351 Gr. CF8 body, BC, Trim No. 10 (5)
1½" and under Class 300 Socketweld/ Threaded
A182-F304H body, floating ball, RTFE seats,Trim No. 10, fire safe (5) (6)
2" to 4" Class 300 RF Flanged A351-CF8 body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (5) (6) BALL VALVES
6" and above Class 300 RF Flanged A351-CF8 body, trunnion mounted, fire safe, API 6D, Trim No. 10 (5) (6)
1½" and under Class 600 Socketweld/ Threaded
A182-F304H body, lubricated, inverted pressure balanced, BC,Trim SS 316
(5) PLUG VALVES
2" and above Class 300 RF Flanged A351-CF8 body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4" and above Class 300 Lugged or RF
Flanged A351-CF8 body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 265 of 403
10.22.4 Line Class: 101SD1S
Line Class: 101SD1S Basic Material: SS 316/316L Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -48 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.8 12.1 8.4 4.6 1.4
Item Size Rating Schedule Type Specification Notes
Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316/316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316/316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (4) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316/316L Seamless/Welded, B16.9 (4)
Nipples and Swage 2" and under Seamless A312 Gr. TP316/316L Sockolets/
Threadolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F316/316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316/316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316/316L, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F316/316L, B16.5
(7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,API 602, Trim No. 12
(5) GATE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316/316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC,Trim No. 10 (5) 1½" and under Class 300 Socketweld/
Threaded A182-F316/316L body, floating ball, RTFE seats,Trim No. 10, fire safe (5) (6)
2" to 4" Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (5) (6) BALL VALVES
6" and above Class 150 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10 (5) (6)
1½" and under Class 600 Socketweld/ Threaded
A182-F316L/316 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(5)
PLUG VALVES
2" and above Class 150 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(5)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 266 of 403
10.22.5 Line Class: 101ST0S
Line Class: 101ST0S Basic Material: Sour SS 316 Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.8 12.1 8.4 4.6 1.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (4)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 267 of 403
10.22.6 Line Class: 101ST1S
Line Class: 101ST1S Basic Material: Sour SS 316 Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.8 12.1 8.4 4.6 1.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (4)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 268 of 403
10.22.7 Line Class: 103ST1S
Line Class: 103ST1S Basic Material: Sour SS 316 Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 38.5 33.4 30.3 28.8 25.2
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (4)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 300 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 269 of 403
10.22.8 Line Class: 101SU0S
Line Class: 101SU0S Basic Material: Sour SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -48 100 200 300 375 450 Pressure Rating (bar) (2) 15.9 13.3 11.2 10.0 7.4 4.6
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (4)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 270 of 403
10.22.9 Line Class: 101SU1S
Line Class: 101SU1S Basic Material: Sour SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -48 100 200 300 375 450 Pressure Rating (bar) (2) 15.9 13.3 11.2 10.0 7.4 4.6
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (4)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 271 of 403
10.22.10 Line Class: 101SU2S
Line Class: 101SU2S Basic Material: Sour SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -48 100 200 300 375 450 Pressure Rating (bar) (2) 15.9 13.3 11.2 10.0 7.4 4.6
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (4)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 272 of 403
10.22.11 Line Class: 103SU0S
Line Class: 103SU0S Basic Material: Sour SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -48 100 200 300 375 450 Pressure Rating (bar) (2) 41.4 34.8 29.2 26.1 24.8 23.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (4)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 300 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 273 of 403
10.22.12 Line Class: 106SU1S
Line Class: 106SU1S Basic Material: Sour SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 100 200 300 375 450 Pressure Rating (bar) (2) 82.7 69.6 58.3 52.1 49.5 46.8
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S 3” to 6” S-40S
8" to 12” S-40S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
14” and above calculated Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (4)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 600 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 600 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 274 of 403
10.22.13 Line Class: 106SU2S
Line Class: 106SU2S Basic Material: Sour SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 100 200 300 375 450 Pressure Rating (bar) (2) 82.7 69.6 58.3 52.1 49.5 46.8
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S 3” to 6” S-40S
8" to 12” S-40S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
14” and above calculated Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (4)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 600 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 600 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 275 of 403
10.22.14 Line Class: 106SA1S
Line Class: 106SA1S Basic Material: Sour 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rat. Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -48 150 250 350 450 538 Pressure Rating (bar) (2) 99.3 74.0 65.0 59.3 54.8 48.9
Item
Size
Rating Schedule
Type
Specification
Notes
Up to 6" S-40S
Seamless
A312 Gr. TP304/304L (1) (2)
8" to 24” S-40S PIPE
26” and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)
1½" and under
Socketweld/ Threaded A182 Gr. F304/304L, B16.11 (4) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (4)
Nipples and Swage 2" and under Seamless A312 Gr. TP304/304L Sockolets/
Threadolets 1½" and under Socketweld/ Threaded A182 Gr. F304/304L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F304/304L, B16.5
FLANGES 2" and above Class 600 Weldneck RF A182 Gr. F304/304L, B16.5
(7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing,API 602, Trim No. 12
(5) GATE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8M body, BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304/304L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304/304L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8M body, BC, Trim No.10 (5) 1½" and under Class 600 Socketweld/
Threaded A182-F304/304L body, floating ball, RTFE seats, Trim No. 10, fire safe (5) (6)
2" to 4" Class 600 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (5) (6) BALL VALVES
6" and above Class 600 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D,Trim No. 10 (5) (6)
1½" and under Class 600 Socketweld/ Threaded
A182-F304L/304 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(5) PLUG VALVES
2" and above Class 600 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced,API 599, Trim SS 316
(5) BUTTERFLY
VALVES 4" and above Class 600 Lugged or RF Flanged
A351-CF8M body, high performance, fire-safe, API 609 Cat. B,Trim No. 10
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 276 of 403
10.22.15 Line Class: 209SA1S
Line Class: 209SA1S Basic Material: Sour 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -48 150 250 350 450 538 Pressure Rating (bar) (2) 148.9 111.0 97.5 88.9 82.2 73.3
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 6" S-40S
Seamless
A312 Gr. TP304/304L (1) (2)
PIPE 8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)
1½" and under
Socketweld A182 Gr. F304/304L, B16.11 FITTINGS El's Tees,
Reducers, Caps, Couplings etc. 2" and above Buttweld A403 Gr. WP304/304L
Seamless/Welded, B16.9 (4)
Nipples and Swages 2" and under Seamless A312 Gr. TP304/304L
Sockolets/ Threadolets 1½" and under Socketweld A182 Gr. F304/304L, MSS-SP97
Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97
2½" and under Class 1500 Socketweld RTJ A182 Gr. F304/304L, B16.5
FLANGES 3" and above Class 900 Weldneck RTJ A182 Gr. F304/304L, B16.5
(7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS 316SS octagonal ring
1½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WB, OS&Y, graphite packing,API 602, Trim No. 12
(5)
2” to 2½" Class 1500 RTJ Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5) GATE VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WB, OS&Y, graphite packing,Trim No. 12
(5)
2” to 2½" Class 1500 RTJ Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 1500 Socketweld A182 Gr. F304/304L body, WC, Trim No. 10
(5)
2” to 2½" Class 1500 RTJ Flanged A351 Gr. CF8M body, BC, Trim No.10 (5) CHECK VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8M body, BC, Trim No.10 (5) Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 277 of 403
10.22.16 Line Class: 225SA1S
Line Class: 225SA1S Basic Material: Sour 304/304L Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%Xray
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 413.7 308.4 270.7 246.9 228.4 203.6
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 6" calculate
Seamless
A312 Gr. TP304/304L (1) (2) PIPE
8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3) FITTINGS El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F304/304L, MSS-SP97
FLANGES 1" and above Class 2500 Weldneck RTJ A182 Gr. F304/304L, B16.5 (7)
BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS 316 SS octagonal ring
1½" and under Class 2500 RTJ Flanged A182 Gr. F304/304L body, WB, OS&Y, graphite packing,API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8M body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 2500 RTJ Flanged A182 Gr. F304/304L body, WB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8M, PSB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 2500 RTJ Flanged A182 Gr. F304/304L body, WC, Trim No. 10
(5) CHECK VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8M body, PSC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 278 of 403
10.22.17 Line Class: 225SJ1S
Line Class: 225SJ1S Basic Material: Sour 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 413.7 368.7 319.1 284.6 263.2 208.9
Item
Size Rating
Schedule
Type
Specification
Notes Up to 4" S-80S 6” to 8” S-100
Seamless A312 Gr. TP321 (1) (2)
8" to 12” PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97
FLANGES 1” and above Class 2500 Weldneck RTJ A182 Gr. F321, B16.5 (7)
BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS 321 SS octagonal ring, B16.20
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, API 602, Trim 321/347
(5)
GATE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim 321/347
(5)
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, Trim 321/347
(5) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C, PSB, OS&Y, graphite packing, Trim 321/347
(5)
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WC, Trim 321/347
(5) CHECK VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C body, PSC, Trim 321/347
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 279 of 403
10.22.18 Line Class: 225SJ2S
Line Class: 225SJ2S Basic Material: Sour 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 413.7 368.7 319.1 284.6 263.2 208.9
Item
Size Rating
Schedule
Type
Specification
Notes Up to 4" S-80S 6” to 8” S-100
Seamless A312 Gr. TP321 (1) (2)
8" to 12” PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (4)
Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97
FLANGES 1” and above Class 2500 Weldneck RTJ A182 Gr. F321, B16.5 (7)
BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS 321 SS octagonal ring, B16.20
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, API 602, Trim 321/347
(5)
GATE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim 321/347
(5)
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, Trim 321/347
(5) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C, PSB, OS&Y, graphite packing, Trim 321/347
(5)
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WC, Trim 321/347
(5) CHECK VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C body, PSC, Trim 321/347
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 280 of 403
10.23 Stainless Steel For Caustic Services Line Classes
10.23.1 Line Classes Notes
The following Notes shall apply to all of this carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with NACE RP0403.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 281 of 403
10.23.2 Line Class: 101SD0C
Line Class: 101SD0C Basic Material: SS 316/316L Max. Temperature: 80°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 19.0 17.1
Item Size Rating
Schedule Type Specification Notes
Up to 2" S-40S
3” to 6” S-10S
Seamless
A312 Gr. TP316/316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316/316L Cl. 1
1½" and under Class acc. to B16.11 Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A403 Gr. WP316/316L, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP316/316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A182 Gr. F316/316L MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316/316L, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F316/316L, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld A182 Gr. F316/316L body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BB, OS&Y, PTFE packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld A182 Gr. F316/316L body, BC, PTFE gasket, trim NO. 9 CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, PTFE gasket, Trim NO. 9
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, PTFE packing,API 602, Trim NO. 9
(6) GATE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, PTFE packing, API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A182 Gr. F316/316L body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.23.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 282 of 403
10.23.3 Line Class: 101SS1C
Line Class: 101SS1C Basic Material: SS 304L Max. Temperature: 80°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 15.9 14.1
Item Size Rating Schedule Type Specification Notes
Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304L Cl. 1
1½" and under Class acc. to B16.11 Socketweld/ Threaded A182 Gr. F304L, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A403 Gr. WP304L, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP304L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A182 Gr. F304L MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F304L, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F304L, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld A182 Gr. F304L body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3 body, BB, OS&Y, PTFE packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld A182 Gr. F304L body, BC, PTFE gasket, trim NO. 9 CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3 body, BC, PTFE gasket, Trim NO. 9
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304L body, BB, OS&Y, PTFE packing,API 602, Trim NO. 9
(6) GATE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3 body, Wedge type: BB, OS&Y, PTFE packing, API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A182 Gr. F304L body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3 body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.23.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 283 of 403
10.23.4 Line Class: 101ST1C
Line Class: 101ST1C Basic Material: SS 316 Max. Temperature: 80°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 19.0 17.1
Item Size Rating Schedule Type Specification Notes
Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316 (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316 Cl. 1
1½" and under Class acc. to B16.11 Socketweld/ Threaded A182 Gr. F316, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A403 Gr. WP316, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP316
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A182 Gr. F316 MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F316, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld A182 Gr. F316 body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BB, OS&Y, PTFE packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld A182 Gr. F316 body, BC, PTFE gasket, trim NO. 9 CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, PTFE gasket, Trim NO. 9
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316 body, BB, OS&Y, PTFE packing,API 602, Trim NO. 9
(6) GATE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, PTFE packing, API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A182 Gr. F316 body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.23.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 284 of 403
10.23.5 Line Class: 103SD0C
Line Class: 103SD0C Basic Material: SS 316/316L Max. Temperature: 80°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 49.6 44.6
Item Size Rating Schedule Type Specification Notes
Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316/316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316/316L Cl. 1
1½" and under Class acc. to B16.11 Socketweld/ Threaded A182 Gr. F316/316L, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A403 Gr. WP316/316L, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP316/316L
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A182 Gr. F316/316L MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F316/316L, B16.5
FLANGES 2" and above Class 300 Weldneck RF A182 Gr. F316/316L, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld A182 Gr. F316/316L body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, BB, OS&Y, PTFE packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld A182 Gr. F316/316L body, BC, PTFE gasket, trim NO. 9 CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, BC, PTFE gasket, Trim NO. 9
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316/316L body, BB, OS&Y, PTFE packing,API 602, Trim NO. 9
(6) GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, PTFE packing, API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A182 Gr. F316/316L body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.23.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 285 of 403
10.23.6 Line Class: 101SR0C
Line Class: 101SR0C Basic Material: SS 304 Max. Temperature: 80°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 19.0 16.7
Item Size Rating
Schedule Type Specification Notes
Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304 (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304 Cl. 1
1½" and under Class acc. to B16.11 Socketweld/ Threaded A182 Gr. F304, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A403 Gr. WP304, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP304
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded (4)
Weldolets 2" and above Buttweld
A182 Gr. F304 MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F304, B16.5
FLANGES 2" and above Class 150 Weldneck RF A182 Gr. F304, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld A182 Gr. F304 body, BB, OS&Y, PTFE packing, trim NO. 9 GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BB, OS&Y, PTFE packing, Trim NO. 9
(6)
1½" and under Class 800 Socketweld A182 Gr. F304 body, BC, PTFE gasket, trim NO. 9 CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, PTFE gasket, Trim NO. 9
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, PTFE packing,API 602, Trim NO. 9
(6) GATE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, PTFE packing, API 600, Trim NO. 9
(6)
1½" and under Class 600 Socketweld with nipples
A182 Gr. F304 body, API 599, RTFE Sleeve and Packing PLUG VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.23.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 286 of 403
10.24 Stainless Steel for Sulfuric Acid Services Line Classes
10.24.1 Line Classes Notes
The following Notes shall apply to all of this carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 287 of 403
10.24.2 Line Class: 101SD0A
Line Class: 101SD0A Basic Material: SS 316/316L Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 19.0 17.1
Item Size Rating Schedule Type Specification Notes
1" to 6” S-40S Seamless A312 TP316/316L (1) (2)
8” to 12 S-10S PIPE
14” to 24” S-10S Welded A358 Gr. 316/316L Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc.
All Buttweld A403-Gr. WP316/316L, B16.9 (5)
Weldolets 2" and above Buttweld A182 Gr. F316/316L, MSS-SP97
FLANGES All Class 150 Weldneck RF A182 Gr. F316/316L, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21 (6)
GATE VALVE 2" and under Class 150 RF Flanged A351 CN7M body, BB, OS&Y, Trim No. 13, PTFE Gask&Pack
(6)
GLOBE VALVES All Class 150 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13
(6)
CHECK VALVES All Class 150 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask
(6)
PLUG VALVES All Class 150 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.24.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 288 of 403
10.24.3 Line Class: 103SD0A
Line Class: 103SD0A Basic Material: SS 316/316L Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 49.6 44.6
Item Size Rating Schedule Type Specification Notes
1" to 6” S-40S Seamless A312 TP316/316L (1) (2)
8” to 12 S-10S PIPE
14” to 24” S-10S Welded A358 Gr. 316/316L Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc.
All Buttweld A403-Gr. WP316/316L, B16.9 (5)
Weldolets 2" and above Buttweld A182 Gr. F316/316L, MSS-SP97
FLANGES All Class 300 Weldneck RF A182 Gr. F316/316L, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21
GATE VALVE 2" and under Class 300 RF Flanged A351 CN7M body, BB, OS&Y, Trim No. 13, PTFE Gask&Pack
(6)
GLOBE VALVES All Class 300 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13
(6)
CHECK VALVES All Class 300 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask
(6)
PLUG VALVES All Class 300 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.24.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 289 of 403
10.24.4 Line Class: 101ST0A
Line Class: 101ST0A Basic Material: SS 316 Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 19.0 17.1
Item Size Rating Schedule Type Specification Notes
1" to 6” S-40S Seamless A312 TP316 (1) (2)
8” to 12 S-40S PIPE
14” to 24” S-10S Welded A358 Gr. 316 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc.
All Buttweld A403-Gr. WP316, B16.9 (5)
Weldolets 2" and above Buttweld A182 Gr. F316, MSS-SP97
FLANGES All Class 150 Weldneck RF A182 Gr. F316, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21
GATE VALVE 2" and under Class 150 RF Flanged A351 CN7M body, BB, OS&Y, Trim No. 13, PTFE Gask&Pack
(6)
GLOBE VALVES All Class 150 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13
(6)
CHECK VALVES All Class 150 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask
(6)
PLUG VALVES All Class 150 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.24.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 290 of 403
10.24.5 Line Class: 101ST1A
Line Class: 101ST1A Basic Material: SS 316 Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 19.0 17.1
Item Size Rating Schedule Type Specification Notes
1" to 6” S-40S Seamless A312 TP316 (1) (2)
8” to 12 S-40S PIPE
14” to 24” S-10S Welded A358 Gr. 316 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc.
All Buttweld A403-Gr. WP316, B16.9 (5)
Weldolets 2" and above Buttweld A182 Gr. F316, MSS-SP97
FLANGES All Class 150 Weldneck RF A182 Gr. F316, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21
GATE VALVE 2" and under Class 150 RF Flanged A351 CN7M body, BB, OS&Y, Trim No. 13, PTFE Gask&Pack
(6)
GLOBE VALVES All Class 150 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13
(6)
CHECK VALVES All Class 150 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask
(6)
PLUG VALVES All Class 150 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.24.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 291 of 403
10.24.6 Line Class: 101ST2A
Line Class: 101ST2A Basic Material: SS 316 Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 19.0 17.1
Item Size Rating Schedule Type Specification Notes
1" to 2” S-80S Seamless A312 TP316 (1) (2)
8” to 14” S-40S PIPE
16” to 24” calculate Welded A358 Gr. 316 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc.
All Buttweld A403-Gr. WP316, B16.9 (5)
Weldolets 2" and above Buttweld A182 Gr. F316, MSS-SP97
FLANGES All Class 150 Weldneck RF A182 Gr. F316, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21
GATE VALVE 2" and under Class 150 RF Flanged A351 CN7M body, BB, OS&Y, Trim No. 13, PTFE Gask&Pack
(6)
GLOBE VALVES All Class 150 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13
(6)
CHECK VALVES All Class 150 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask
(6)
PLUG VALVES All Class 150 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.24.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 292 of 403
10.24.7 Line Class: 103ST1A
Line Class: 103ST1A Basic Material: SS 316 Max. Temperature: 80°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 80 Pressure Rating (bar) (2) 49.6 44.6
Item Size Rating Schedule Type Specification Notes
1" to 6” S-40S Seamless A312 TP316 (1) (2)
8” to 12 S-40S PIPE
14” to 24” S-10S Welded A358 Gr. 316 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc.
All Buttweld A403-Gr. WP316, B16.9 (5)
Weldolets 2" and above Buttweld A182 Gr. F316, MSS-SP97
FLANGES All Class 300 Weldneck RF A182 Gr. F316, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat Gasket PTFE (Gylon) B16.21
GATE VALVE 2" and under Class 300 RF Flanged A351 CN7M body, BB, OS&Y, Trim No. 13, PTFE Gask&Pack
(6)
GLOBE VALVES All Class 300 RF Flanged A351 CN7M body, BB, OS&Y, PTFE Gask&Pack, Trim No. 13
(6)
CHECK VALVES All Class 300 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask
(6)
PLUG VALVES All Class 300 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.24.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 293 of 403
10.24.8 Line Class: 101SW1A
Line Class: 101SW1A Basic Material: Zecor™+SS310 Max. Temperature: 127°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 127 Pressure Rating (bar) (2) 19.0 8.7
Item Size Rating
Schedule Type Specification Notes
Up to ¾” S-40S Seamless A312 TP310S (1) (2)
1" to 6” S-40S 8” to 12 S-40S
PIPE
14” to 24” S-10S Welded Zecor™ (3)
Up to ¾” Socketweld A182 Gr. F310, B16.11 FITTINGS
El's Tees, Reducers, Caps,
etc. 1" and above Weldneck Zecor™, B16.9 (5)
Extruded Outlets ½” and above Buttweld Zecor™, MSS-SP97 Stub in 1½” and above Buttweld 316L SS reinforcement pad
Up to ¾” Class 150 Socketweld A182 Gr. F310, B16.5 FLANGES
1” and above Class 150 Lap Joint A105 Epoxy painted or A182 Gr. F304 Stub end shall be of Zecor™
(8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Flat ring type face, 3.0 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or Goretex GR
GATE VALVE All Class 150 RF Flanged A351 CK20 body, BB, OS&Y, 310S Trim, integral backseat, CF8M gland flange, B8 bolt, PTFE Gask&Pack
(6)
GLOBE VALVES All Class 150 RF Flanged
A351 CK20 body, BB, OS&Y, taper type disc, 310S Trim, integral seat, CF8M gland flange, B8 bolt,PTFE Gask&Pack
(6)
CHECK VALVES All Class 150 RF Flanged A351 CN7M body, BC, Trim No. 13, PTFE Gask, integral seats
(6)
PLUG VALVES All Class 150 RF Flanged A351 CN7M body, API 599, PTFE Sleeve and Packing
(6)
BUTTERFLY VALVES 3” and above Class 150 Wafer
A351- CD4MCu body and disc, Ferralium 255 shaft, Ferralium 225 pins, CD4MCu Metal to metal seats with Glass reinforc. PTFE Insert, class VI shut off at 232°C
NEEDLE VALVE ½” Class 3000 Threaded
A351-CN7M body, Screwed bonnet rising stem, inside screw, needle point disc integral with stem, integral seats TFE packing
SAMPLING VALVES ¼” to ¾” Class 300
Threaded male inlet Plain end
outlet
A351-CN7M body, outside stem thread, union bonnet, rising stem, needle point disc integral with stem, renewable TFE seats, TFE packing
Notes: Notes (1) through (9) of 10.24.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 294 of 403
10.25 Stainless Steel Alloys for Hydrogen Services
10.25.1 Line Classes Notes
The following Notes shall apply to all of this steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Material and Corrosion Allowance:
For hydrogen service, refer to API-941 for temperature limits of material at applicable hydrogen partial pressure.
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Threaded and socket welded connections are not allowed.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
Threaded connections only allowed downstream of vents, drains, hydrotest connections, and instrument take-offs. Threaded O'lets only allowed for thermowell and hydrotest connections.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
Flange connections shall be avoided as possible and replaced with buttwelded connections
(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance
(10) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 295 of 403
10.25.2 Line Class: 101SU0H
Line Class: 101SU0H Basic Material: H2 SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 100 200 300 375 450 Pressure Rating (bar) (2) 15.9 13.3 11.2 10.0 7.4 4.6
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S 4” to 6” S-10S
Seamless A312 Gr. TP316L (1) (2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F316L, MSS-SP97 FLANGES 1" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 150 RF Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 150 RF Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 150 RF Flanged A182 Gr. F316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 296 of 403
10.25.3 Line Class: 103SD1H
Line Class: 103SD1H Basic Material: H2 SS 316/316L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 150 250 350 450 Pressure Rating (bar) (2) 49.6 38.5 33.4 30.3 28.8
Item Size Rating Schedule Type Specification Notes
Up to 6" S-40S Seamless A312 Gr. TP316/316L (1) (2)
8” to 12” S-40S PIPE
14" and above S-20 Welded A358 Gr. 316/316L Cl. 1 (3)
FITTINGS El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A403 Gr. WP316/316L Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F316/316L, MSS-SP97
FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F316/316L, B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A182 Gr. F316/316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 300 RF Flanged A182 Gr. F316/316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 300 RF Flanged A182 Gr. F316/316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr.CF8M body, BC, Trim No. 10 (6) 1½" and under Class 300 RF Flanged A182-F316/316L body, floating ball,
RTFE seats, Trim No. 10, fire safe (6)(7)
2" to 4" Class 300 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 6D,Trim No. 10 (6)(7) BALL VALVES
6" and above Class 300 RF Flanged A351-CF8M body, trunnion mounted, fire safe, API 6D, Trim No. 10 (6)(7)
1½" and under Class 300 RF Flanged A182-F316L/316 body, lubricated, inverted pressure balanced, BC, Trim SS 316
(6)
PLUG VALVES
2" and above Class 300 RF Flanged A351-CF8M body, BC, lubricated, inverted pressure balanced, API 599, Trim SS 316
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 297 of 403
10.25.4 Line Class: 103SJ0H
Line Class: 103SJ0H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 49.6 44.2 38.3 34.1 31.6 25.2
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S 3” to 6” S-40S
Seamless A312 Gr. TP321 (1) (2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97
FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F321, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts. GASKETS SS321 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½" and under Class 300 RF Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
1½" and under Class 300 RF Flanged A182 Gr. F321 body, BC, Trim 321/347
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C body, BC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 298 of 403
10.25.5 Line Class: 103SJ1H
Line Class: 103SJ1H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 49.6 44.2 38.3 34.1 31.6 25.2
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S 3” to 6” S-40S
Seamless A312 Gr. TP321 (1) (2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97
FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F321, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS SS321 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½" and under Class 300 RF Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
1½" and under Class 300 RF Flanged A182 Gr. F321 body, BC, Trim 321/347
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8C body, BC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 299 of 403
10.25.6 Line Class: 203SJ1H (to be only applied to hydrocrakers)
Line Class: 203SJ1H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: 232°C Butt-weld Per ASME B16.25 Rat. Class: 300 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 49.6 44.2 38.3 34.1 31.6 25.2
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S 3” to 6” S-40S
Seamless A312 Gr. TP321 (1) (2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97
FLANGES 1" and above Class 300 Weldneck RTJ A182 Gr. F321, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS 321 SS octagonal ring, B16.20
1½" and under Class 300 RTJ Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2" and above Class 300 RTJ Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½" and under Class 300 RTJ Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2" and above Class 300 RTJ Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
1½" and under Class 300 RTJ Flanged A182 Gr. F321 body, BC, Trim 321/347
(6) CHECK VALVES
2" and above Class 300 RTJ Flanged A351 Gr. CF8C body, BC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 300 of 403
10.25.7 Line Class: 106SJ1H
Line Class: 106SJ1H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 99.3 88.5 76.6 68.3 63.2 50.0
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S 3” to 6” S-40S
Seamless A312 Gr. TP321 (1) (2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97
FLANGES 1" and above Class 600 Weldneck RF A182 Gr. F321, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS SS321 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 600 RF Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½" and under Class 600 RF Flanged A182 Gr. F321 body, BB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
1½" and under Class 600 RF Flanged A182 Gr. F321 body, BC, Trim 321/347
(6) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8C body, BC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 301 of 403
10.25.8 Line Class: 209SJ1H
Line Class: 209SJ1H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 148.9 132.7 114.9 102.4 94.8 75.2
Item
Size Rating
Schedule
Type
Specification
Notes Up to 3" S-80S 4” to 6” S-100
Seamless A312 Gr. TP321 (1) (2)
8" to 12” S-100 PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97 2½ and under Class 1500 Weldneck RTJ
FLANGES 3" and above Class 900 Weldneck RTJ A182 Gr. F321, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS 321 SS octagonal ring, B16.20
2½ and under Class 1500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
2½ and under Class 1500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
2½ and under Class 1500 RTJ Flanged A182 Gr. F321 body, WC, Trim 321/347
(6) CHECK VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8C body, BC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 302 of 403
10.25.9 Line Class: 215SJ1H
Line Class: 215SJ1H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 248.2 221.2 191.5 170.7 157.9 125.5
Item
Size Rating
Schedule
Type
Specification
Notes Up to 4" S-80S 6” to 8” S-100
Seamless A312 Gr. TP321 (1) (2)
8" to 12” S-100 PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97
FLANGES 1” and above Class 1500 Weldneck RTJ A182 Gr. F321, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS 321 SS octagonal ring, B16.20
1½ and under Class 1500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2" and above Class 1500 RTJ Flanged A351 Gr. CF8C body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½ and under Class 1500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A351 Gr. CF8C, PSB, OS&Y, graphite packing, Trim 321/347
(6)
1½ and under Class 1500 RTJ Flanged A182 Gr. F321 body, WC, Trim 321/347
(6) CHECK VALVES
2" and above Class 1500 RTJ Flanged A351 Gr. CF8C body, PSC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 303 of 403
10.25.10 Line Class: 225SJ1H
Line Class: 225SJ1H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 413.7 368.7 319.1 284.6 263.2 208.9
Item
Size Rating
Schedule
Type
Specification
Notes Up to 4" S-80S 6” to 8” S-100
Seamless A312 Gr. TP321 (1) (2)
8" to 12” PIPE
14” and above calculated Welded A358 Gr. 321 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97
FLANGES 1” and above Class 2500 Weldneck RTJ A182 Gr. F321, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS 321 SS octagonal ring, B16.20
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C, PSB, OS&Y, graphite packing, Trim 321/347
(6)
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WC, Trim 321/347
(6) CHECK VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C body, PSC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 304 of 403
10.25.11 Line Class: 225SJ2H
Line Class: 225SJ2H Basic Material: H2 SS 321 Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 413.7 368.7 319.1 284.6 263.2 208.9
Item
Size Rating
Schedule
Type
Specification
Notes Up to 4" S-80S
6” to 8”
Seamless
A312 Gr. TP321
(1) (2)
8" to 12” PIPE
14” and above
calculated Welded A358 Gr. 321 Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP321 Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F321, MSS-SP97
FLANGES 1” and above Class 2500 Weldneck RTJ A182 Gr. F321, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS 321 SS octagonal ring, B16.20
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, API 602, Trim 321/347
(6)
GATE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim 321/347
(6)
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WB, OS&Y, graphite packing, Trim 321/347
(6) GLOBE VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C, PSB, OS&Y, graphite packing, Trim 321/347
(6)
1½ and under Class 2500 RTJ Flanged A182 Gr. F321 body, WC, Trim 321/347
(6) CHECK VALVES
2" and above Class 2500 RTJ Flanged A351 Gr. CF8C body, PSC, Trim 321/347
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 305 of 403
10.25.12 Line Class: 103SR0H
Line Class: 103SR0H Basic Material: H2 SS 304 Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 150 250 350 450 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S 4” to 6” S-10S
Seamless A312 Gr. TP304 (1) (2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 304 Cl. 1 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A403 Gr. WP304 Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F304, MSS-SP97 FLANGES 1" and above Class 300 Weldneck RF A182 Gr. F304, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 300 RF Flanged A182 Gr. F304 body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 300 RF Flanged A182 Gr. F304 body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6) 1½" and under Class 300 RF Flanged A182 Gr. F304 body, BC, Trim No. 10 (6)
CHECK VALVES 2" and above Class 300 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 306 of 403
10.25.13 Line Class: 106SM0H
Line Class: 106SM0H Basic Material: H2 SS 347H Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 99.3 90.6 79.9 72.2 67.8 50.0
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S
3” to 6” S-40S
Seamless
A312 Gr. TP347H (1)
(2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 347H Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP347H Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F347H, MSS-SP97
FLANGES 1" and above Class 600 Weldneck RF A182 Gr. F347H, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS SS321/347 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 600 RF Flanged A182 Gr. F347H body, BB, OS&Y, graphite packing, API 602, Trim 347H
(6)
GATE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 347H
(6)
1½" and under Class 600 RF Flanged A182 Gr. F347H body, BB, OS&Y, graphite packing, Trim 347H
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
1½" and under Class 600 RF Flanged A182 Gr. F347H body, BC, Trim 347H
(6) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8C body, BC, Trim 347H (6) Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 307 of 403
10.25.14 Line Class: 106SU0H
Line Class: 106SU0H Basic Material: H2 SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 100 200 300 375 450 Pressure Rating (bar) (2) 82.7 69.6 58.3 52.1 49.5 46.8
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S
3” to 6” S-40S
Seamless
A312 Gr. TP316L (1)
(2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 316L Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F316L, MSS-SP97 FLANGES 1" and above Class 600 Weldneck RF A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS SS316 Metal grooved gasket with flexible graphite layer is preferred (Kammprofile and equivalent)
1½" and under Class 600 RF Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 600 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 600 RF Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 600 RF Flanged A182 Gr. F316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 308 of 403
10.25.15 Line Class: 209SA1H
Line Class: 209SA1H Basic Material: SS 304/304L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 900 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 150 250 350 450 Pressure Rating (bar) (2) 148.9 111.0 97.5 88.9 82.2
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 6" S-80S
Seamless
A312 Gr. TP304/304L (1) (2)
PIPE 8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)
FITTINGS El's Tees,
Reducers, Caps, etc.
2" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)
Weldolets 2" and above Buttweld A182 Gr. F304/304L, MSS-SP97 2½" and under Class 1500 Weldneck RTJ A182 Gr. F304/304L, B16.5
FLANGES 3" and above Class 900 Weldneck RTJ A182 Gr. F304/304L, B16.5
(8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS 316 SS octagonal ring
2½" and under Class 1500 RTJ Flanged A182 Gr. F304/304L body, WB, OS&Y, graphite packing,API 602, Trim No. 12
(6)
GATE VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
2½" and under Class 1500 RTJ Flanged A182 Gr. F304/304L body, WB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
2½" and under Class 1500 RTJ Flanged A182 Gr. F304/304L body, WC, Trim No. 10
(6) CHECK VALVES
3" and above Class 900 RTJ Flanged A351 Gr. CF8M body, BC, Trim No.10 (6) Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 309 of 403
10.25.16 Line Class: 215SA1H
Line Class: 215SA1H Basic Material: H2 SS 304/304L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 150 250 350 450 Pressure Rating (bar) (2) 248.2 185.0 162.4 148.1 137.0
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 4" S-80S
Seamless
A312 Gr. TP304/304L (1) (2)
PIPE 8" and above calculate Welded A358 Gr. 304/304L Cl. 1 (3)
FITTINGS El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A403 Gr. WP304/304L Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F304/304L, MSS-SP97
FLANGES 1" and above Class 1500 Weldneck RTJ A182 Gr. F304/304L, B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS 316 SS octagonal ring
1½" and under Class 1500 RTJ Flanged A182 Gr. F304/304L body, WB, OS&Y, graphite packing,API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 1500 RTJ Flanged A351 Gr. CF8M body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 1500 RTJ Flanged A182 Gr. F304/304L body, WB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged A351 Gr. CF8M, PSB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 1500 RTJ Flanged A182 Gr. F304/304L body, WC, Trim No. 10
(6) CHECK VALVES
2" and above Class 1500 RTJ Flanged A351 Gr. CF8M body, PSC, Trim No.10
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 310 of 403
10.25.17 Line Class: 206SM0H Line Class: 206SM0H Basic Material: H2 SS 347H Max. Temperature: 538°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rating Class: 600 RJ B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -29 100 200 300 400 538 Pressure Rating (bar) (2) 99.3 90.6 79.9 72.2 67.8 50.0
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S
3” to 6” S-40S
Seamless
A312 Gr. TP347H (1)
(2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 347H Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP347H Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F347H, MSS-SP97
FLANGES 1" and above Class 600 Weldneck RTJ A182 Gr. F347H, B16.5 (8)
BOLTING A453 G. 660 Cl. A stud bolts, heavy pattern with heavy hex nuts GASKETS SS321/347 Octagonal Ring B16.10
1½" and under Class 600 RTJ Flanged A182 Gr. F347H body, BB, OS&Y, graphite packing, API 602, Trim 347H
(6)
GATE VALVES
2" and above Class 600 RTJ Flanged A351 Gr. CF8C body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 347H
(6)
1½" and under Class 600 RTJ Flanged A182 Gr. F347H body, BB, OS&Y, graphite packing, Trim 347H
(6) GLOBE VALVES
2" and above Class 600 RTJ Flanged A351 Gr. CF8C, BB, OS&Y, graphite packing, Trim 321/347
(6)
1½" and under Class 600 RTJ Flanged A182 Gr. F347H body, BC, Trim 347H
(6) CHECK VALVES
2" and above Class 600 RTJ Flanged A351 Gr. CF8C body, BC, Trim 347H (6) Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 311 of 403
10.25.18 Line Class: 206SU0H
Line Class: 206SU0H Basic Material: H2 SS 316L Max. Temperature: 450°C Stress Relief: Per Code Service: Hydrogen Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RJ B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 100 200 300 375 450 Pressure Rating (bar) (2) 82.7 69.6 58.3 52.1 49.5 46.8
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-80S
3” to 6” S-40S
Seamless
A312 Gr. TP316L (1)
(2)
8" to 12” S-40S PIPE
14” and above calculated Welded A358 Gr. 316L Cl. 1 (3)
FITTINGS
El's Tees, Reducers, Caps,
etc.
1" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (5)
Weldolets 1" and above Buttweld A182 Gr. F316L, MSS-SP97 FLANGES 1" and above Class 600 Weldneck RTJ A182 Gr. F316L, B16.5 (8) BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS SS316 Octagonal ring B16.10
1½" and under Class 600 RTJ Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 600 RTJ Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 600 RTJ Flanged A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 600 RTJ Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 600 RTJ Flanged A182 Gr. F316L body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 600 RTJ Flanged A351 Gr. CF3M body, BC, Trim No. 10
(6)
Notes: Notes (1) through (10) of 10.25.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 312 of 403
10.26 Stainless Steel for Toxic and Benzene(<95% wt) Service Line Classes.
10.26.1 Line Classes Notes
The following Notes shall apply to all of the stainless steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration welds.
(4) Valve leakage
All block valves shall satisfy the following:
• Tightness class: “B” according to ISO-15848, part I, table 1. Test fluid shall be helium (class BH)
• Endurance class: CO2 (1500 cycles)
• Temperature class: 400°C according to ISO-15848, part I, table 3.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance
(10) Surface Roughness shall be < 3.2 μm
(11) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 313 of 403
10.26.2 Line Class: 103SD1X Line Class: 103SD1X Basic Material: SS 316/316L Max. Temperature: 538°C Stress Relief: Per Code Service: Toxic, Benzene (<95%) Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25
Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 38.5 33.4 30.3 28.8 25.2
Item Size Rating Schedule Type Specification Notes
Up to 6" S-40S 8” to 12” S-40S
Seamless A312 Gr. TP316/316L (1) (2) PIPE
14" and above S-20 Welded A358 Gr. 316/316L Cl.1 1½" and under Class acc. to B16.11 Socketweld A182 Gr. F316/316L, B16.11
(3) FITTINGS El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A403 Gr. WP316/316L Cl. 1 Seamless/Welded, B16.9 (5)
Nipples, Swages 2" and under Seamless A312 Gr. TP316/316L
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A182 Gr. F316/316L, MSS SP 97
Weldolets 2" and above Buttweld A182 Gr. F316/316L MSS SP 97 1½" and under Class 300 Sockwd RFS FLANGES 2" and above Class 300 Weldnck RFS
A182 Gr. F316/316L, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts.
GASKETS Metal grooved gasket with flexible graphite layer is preferred. Or, spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20. Inner ring 316 (10)
1½" and under Class 800 Socketweld A182 Gr. F316/316L Cl. 2 body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.12
(6)
GATE VALVES
2" and above Class 300 RF Flanged SM
A351 Gr. CF8M body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld A182 Gr. F316/316L Cl. 2 body, BB, OS&Y, Live Loaded Sealing, API 602, Trim No.12
(6)
GLOBE VALVES
2" and above Class 300 RF Flanged SM
A351 Gr. CF8M body, BB, OS&Y, Live Loaded Sealing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld A182 Gr. F316/316L Cl. 2 body, BC, Trim No. 1
(6) CHECK VALVES
2" and above Class 300 RF Flanged SM A351 Gr. CF8M body, BC, Trim No. 1 (6)
1½" and under Class 300 Socketweld with nipples
A182 Gr. F316/316L Cl. 2 body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe
(6)(7)
2" to 4" Class 300 RF Flanged SM
A351 Gr. CF8M body, floating ball, RTFE seats, fire safe, API 6D, Graphite Packing, Trim No. 10
(6)(7) BALL VALVES
6" and above Class 300 RF Flanged SM
A351 Gr. CF8M body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP
(6)(7)
Notes: Notes (1) through (11) of 10.26.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 314 of 403
10.27 Specialty Alloys For Process Service Line Classes
10.27.1 Line Classes Notes
The following Notes shall apply to all of this specialty alloys class family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.
(10) Void.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 315 of 403
10.27.2 Line Class: 101NC0P
Line Class: 101NC0P Basic Material: Alloy C276 Max. Temperature: 500°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -48 100 200 300 400 500 Pressure Rating (bar) (2) 20.0 17.7 13.8 10.2 6.5 2.8
Item Size Rating Schedule Type Specification Notes
PIPE Up to 8" calculate Seamless B619 N10276
1½" and under
Class acc. to B16.11
Socketweld/ Threaded
B462 N10276, B16.11 Annealed (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld B366 Gr. CRHC276 Annealed Seamless, B16.9
Nipples and Swages 2" and under Seamless B366 Gr. CRHC276 Annealed
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded B462 N10276 Annealed, MSS-SP97
Weldolets 2" and above Buttweld B462 N10276 Annealed, MSS-SP97
1½" and under Class 150 Socketweld RF B462 N10276 Annealed, B16.5 (8) FLANGES
2" and above Class 150 Weldneck RF B462 N10276 Annealed, B16.5 BOLTING A193 G. B7M stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2HM
GASKETS Spiral-wound, N10276 windings, flexible graphite filled with carbon steel outer ring, per B16.20. N10276 Inner Ring
1½" and under Class 800 Socketweld / Threaded
B462 N10276 body, BB, OS&Y, graphite packing, API 602, Trim N10276
(6)
GATE VALVES
2" and above Class 150 RF Flanged B462 N10276 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim N10276
(6)
1½" and under Class 800 Socketweld / Threaded
B462 N10276 body, BB, OS&Y, graphite packing,Trim N10276
(6) GLOBE VALVES
2" and above Class 150 RF Flanged B462 N10276 body, BB, OS&Y, graphite packing, Trim N10276
(6)
1½" and under Class 800 Socketweld
B462 N10276 body, BB, Trim N10276, hydraulically tested,
(6) CHECK VALVES
2" and above Class 150 RF Flanged B462 N10276 body, BB, Trim N10276, hydraulically tested,
(6)
Notes: Notes (1) through (10) of 10.27.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 316 of 403
10.27.3 Line Class: 101NT1P
Line Class: 101NT1P Basic Material: Alloy 20 Max. Temperature: 325°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 200 300 325 Pressure Rating (bar) (2) 15.9 13.5 11.3 9.7 9.3
Item
Size
Rating Schedule
Type
Specification
Notes
1½" and under Sch. 40S min. Seamless B464, (UNS N08020) (1) PIPE 2" to 12" Sch 10S min. Seamless B464 (UNS N08020) (1)
1½" and under Class acc. to B16.11 Socketweld/ Threaded B366, (UNS N08020), B16.11 (4) FITTINGS
El's, Tees
Reducers, Caps, Couplings, etc.
2" and above Buttweld B366 (UNS N08020), B16.9 (5)
Nipples and Swages ½"-1½" Seamless B464, (UNS N08020)
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded B462 (UNS N08020), B16.11 (4)
Weldolets 2" and above Buttweld B462 (UNS N08020), B16.9
1½" and under Class 150 Socketweld RF B462 (UNS N08020), B16.5
FLANGES 2" and above Class 150 Weldneck
RF B462 (UNS N08020), B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts.
GASKETS Spiral-wound, N08020 windings, flexible graphite filled with carbon steel outer ring, per B16.20. N08020 Inner Ring
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BB, OS&Y, Trim No.13
(6) GATE VALVES
2" to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BB, OS&Y, Trim No.13
(6) GLOBE VALVES
2" to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BC, Trim No.13
(6) CHECK VALVES
2" to 12" Class 150 RF Flanged A351-CN7M body, BC, Trim No.13
(6)
1½" and under Class 800 Socketweld with nipples
B462 (UNS N08020) body, API 599, RTFE Sleeve and Packing
(6) PLUG VALVES
2" to 12" Class 150 RF Flanged A351-CN7M body, API 599, RTFE Sleeve and Packing (6)
1½" and under Class 800 Socketweld with nipples
B462 (UNS N08020) body, floating ball, RTFE seats and seals, Trim No.13, fire safe
(6)(7)
BALL VLAVES
2" to 12" Class 150 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe
(6)(7)
Notes: Notes (1) through (10) of 10.27.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 317 of 403
10.27.4 Line Class: 103NT1P
Line Class: 103NT1P Basic Material: Alloy 20 Max. Temperature: 325°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 200 300 325 Pressure Rating (bar) (2) 41.4 35.3 29.4 25.4 24.4
Item
Size Rating
Schedule
Type
Specification
Notes 1½" and under Sch. 40S min. Seamless B464, (UNS N08020) (1) PIPE
2" to 12" Sch 10S min. Seamless B464 (UNS N08020) (1)
1½" and under Class acc. to B16.11 Socketweld/ Threaded B366, (UNS N08020), B16.11 (4) FITTINGS
El's, Tees
Reducers, Caps, Couplings, etc.
2" and above Buttweld B366 (UNS N08020), B16.9 (5)
Nipples and Swages ½"-1½" Seamless B464, (UNS N08020)
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded B462 (UNS N08020), B16.11 (4)
Weldolets 2" and above Buttweld B462 (UNS N08020), B16.9
1½" and under Class 300 Socketweld RF B462 (UNS N08020), B16.5
FLANGES 2" and above Class 300 Weldneck
RF B462 (UNS N08020), B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts.
GASKETS Spiral-wound, N08020 windings, flexible graphite filled with carbon steel outer ring, per B16.20. N08020 Inner Ring
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BB, OS&Y, Trim No.13
(6) GATE VALVES
2" to 12" Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BB, OS&Y, Trim No.13
(6) GLOBE VALVES
2" to 12" Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BC, Trim No.13
(6) CHECK VALVES
2" to 12" Class 300 RF Flanged A351-CN7M body, BC, Trim No.13
(6)
1½" and under Class 800 Socketweld with nipples
B462 (UNS N08020) body, API 599, RTFE Sleeve (6)
PLUG VALVES 2" to 12" Class 300 RF Flanged A351-CN7M body, API 599,
RTFE Sleeve and Packing (6)
1½" and under Class 800 Socketweld with nipples
B462 (UNS N08020) body, floating ball, RTFE seats and seals, Trim No.13, fire safe
(6)(7)
BALL VLAVES
2" to 12" Class 300 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe
(6)(7)
Notes: Notes (1) through (9) of 10.27.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 318 of 403
10.27.5 Line Class: 103NY1P
Line Class: 103NY1P Basic Material: Hastelloy C Max. Temperature: 425°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 200 300 400 425 Pressure Rating (bar) (2) 51.7 50.9 47.2 42.9 48.9 35.2
Item
Size
Rating Schedule
Type
Specification
Notes
1½" and under Sch. 40S min. Seamless B619, (UNS N06003) (1) PIPE 2" to 12" Sch 10S min. Seamless B619, (UNS N06003) (1)
1½" and under Class acc. to B16.11 Socketweld/ Threaded B366, (UNS N06003), B16.11 (4) FITTINGS
El's, Tees
Reducers, Caps, Couplings, etc.
2" and above Buttweld B366 (UNS N06003), B16.9 (5)
Nipples and Swages ½"-1½" Seamless B464, (UNS N06003)
Sockolets/ Threadolets 1½" and under Class acc. to MSS
SP97 Socketweld/
Threaded B462 (UNS N06003), B16.11 (4)
Weldolets 2" and above Buttweld B462 (UNS N06003), B16.9
1½" and under Class 300 Socketweld RF B462 (UNS N06003), B16.5
FLANGES 2" and above Class 300 Weldneck
RF B462 (UNS N06003), B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts.
GASKETS Spiral-wound, N06003 windings, flexible graphite filled with carbon steel outer ring, per B16.20. N06003 Inner Ring
1½" and under Class 800 Socketweld B462 (UNS N06003) body, BB, OS&Y, Trim No. N06003
(6) GATE VALVES
2" to 12" Class 300 RF Flanged Hastelloy C UNS N06003 body, BB, OS&Y, Trim No. N06003
(6)
1½" and under Class 800 Socketweld B462 (UNS N06003) body, BB, OS&Y, Trim No. N06003
(6) GLOBE VALVES
2" to 12" Class 300 RF Flanged Hastelloy C UNS N06003 body, BB, OS&Y, Trim No. N06003
(6)
1½" and under Class 800 Socketweld B462 (UNS N06003) body, BC, Trim No. N06003
(6) CHECK VALVES
2" to 12" Class 300 RF Flanged Hastelloy C UNS N06003 body, BC, Trim No. N06003
(6)
1½" and under Class 800 Socketweld with nipples
Hastelloy C UNS N06003 body, floating ball, RTFE seats and seals, Trim No. N06003, fire safe
(6)(7)
BALL VALVES
2" to 12" Class 300 RF Flanged B462 (UNS N06003) body, floating ball, RTFE seats and seals, Trim No. N06003, fire safe
(6)(7)
1½" and under Class 800 Socketweld with nipples
Hastelloy C UNS N06003 body, API 599, RTFE Sleeve and Packing
(6) PLUG VALVE
2" to 12" Class 300 RF Flanged B462 (UNS N06003) body, API 599, RTFE Sleeve and Packing (6)
Notes: Notes (1) through (9) of 10.27.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 319 of 403
10.27.6 Line Class: 215NS1P
Line Class: 215NS1P Basic Material: Alloy 825 Max. Temperature: 538°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25
Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested, Welds 100%Xray
Temperature (°C) (2) -48 150 250 350 450 538 Pressure Rating (bar) (2) 258.6 250.8 231.8 201.1 169.0 125.5
Item Size Rating Schedule Type Specification Notes
PIPE Up to 8"
Seamless or Welded
B423 N08825 Seamless Annealed B705 N08825 Welded Annealed
(1) (2)
1½" and under
Socketweld B366 Gr. WPNICMC, B16.11 Annealed (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld B366 Gr. WPNICMC Annealed Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless B423 N08825 Annealed
Sockolets 1½" and under Socketweld B564 N08825 Annealed, MSS-SP97 Weldolets 2" and above Buttweld B564 N08825 Annealed, MSS-SP97
FLANGES All Class 1500 Weldneck RTJ B564 N08825 Annealed, B16.5 (8)
BOLTING A193 G. B7 stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2H GASKETS Octagonal Ring N08825 B16.20
1½" and under Class 1500 Socketweld B564 N08825 body, WB, OS&Y, graphite packing, API 602, Trim N08825
(6)
GATE VALVES
2" and above Class 1500 RTJ Flanged B564 N08825 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim N08825
(6)
1½" and under Class 1500 Socketweld B564 N08825 body, WB, OS&Y, graphite packing, Trim N08825
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged B564 N08825, PSB, OS&Y, graphite packing, Trim N08825
(6)
CHECK VALVES 3/4“ – 8” Class 1500 RTJ Flanged B564 N08825 body, PSB, Trim N08825, hydraulically tested, Swing type
(6)
Notes: Notes (1) through (9) of 10.27.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 320 of 403
10.27.7 Line Class: 225NS1P
Line Class: 225NS1P Basic Material: Alloy 825 Max. Temperature: 538°C Stress Relief: Per Code Service: Process Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25
Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested, Welds 100%Xray
Temperature (°C) (2) -48 150 250 350 450 538 Pressure Rating (bar) (2) 430.9 418.2 386.2 335.3 281.8 208.9
Item Size Rating Schedule Type Specification Notes
PIPE Up to 8" calculate Seamless or Welded
B423 N08825 Seamless Annealed B705 N08825 Welded Annealed
(1) (2)
FITTINGS
El's Tees, Reducers, Caps,
etc.
2" and above Buttweld B366 Gr. WPNICMC Annealed Seamless/Welded, B16.9 (5)
Weldolets 2" and above Buttweld B564 N08825 Annealed, MSS-SP97
FLANGES All Class 2500 Weldneck RTJ B564 N08825 Annealed, B16.5 (8)
BOLTING A193 G. B7 stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2H GASKETS Octagonal Ring N08825 B16.20
1½" and under Class 2500 RTJ Flanged B564 N08825 body, WB, OS&Y, graphite packing, API 602, Trim N08825
(6)
GATE VALVES
2" and above Class 2500 RTJ Flanged B564 N08825 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim N08825
(6)
1½" and under Class 2500 RTJ Flanged B564 N08825 body, WB, OS&Y, graphite packing, Trim N08825
(6) GLOBE VALVES
2" and above Class 2500 RTJ Flanged B564 N08825, PSB, OS&Y, graphite packing, Trim N08825
(6)
CHECK VALVES 3/4“ – 8” Class 2500 RTJ Flanged B564 N08825 body, PSB, Trim N08825, hydraulically tested, Swing type
(6)
Notes: Notes (1) through (9) of 10.27.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 321 of 403
10.28 Specialty Alloys For Caustic Service Line Classes
10.28.1 Line Classes Notes
The following Notes shall apply to all of this specialty alloys class family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with NACE RP0403.
(3) Seamless or double-arc welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
Threaded connections only allowed downstream of vents, drains, hydrotest connections, and instrument take-offs. Threaded O'lets only allowed for thermowell and hydrotest connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
Use ¾" valves for vent and drain connections as minimum.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 322 of 403
10.28.2 Line Class: 101NT1C
Line Class: 101NT1C Basic Material: Alloy 20 Max. Temperature: 138°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 138 Pressure Rating (bar) (2) 15.9 13.5 12.6
Item
Size Rating
Schedule
Type
Specification
Notes 1½" and under Sch. 40S min. Seamless B464, (UNS N08020)
(1) PIPE 2" to 12" Sch 10S min. Seamless B464 or B474,
(UNS N08020) (1)
1½" and under Class acc. to B16.11 Socketweld B366, (UNS N08020), B16.11 (4) FITTINGS
El's, Tees Reducers, Caps, Couplings, etc.
2" and above Buttweld B366 (UNS N08020), B16.9 (5)
Nipples and Swages ½"-1½" Seamless B464, (UNS N08020)
Sockolets 1½" and under Class acc. to MSS SP97 Socketweld B462 (UNS N08020), B16.11 (4)
Weldolets 2" and above Buttweld B462 (UNS N08020), B16.9
1½" and under Class 150 Socketweld RF B462 (UNS N08020), B16.5
FLANGES 2" and above Class 150 Weldneck
RF B462 (UNS N08020), B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 1.5 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or equal.
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BB, OS&Y, Trim No.13
(6) GATE VALVES
2" to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BB, OS&Y, Trim No.13
(6) GLOBE VALVES
2" to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BC, Trim No.13
(6) CHECK VALVES
2" to 12" Class 150 RF Flanged A351-CN7M body, BC, Trim No.13
(6)
1½" and under Class 800 Socketweld with nipples
B462 (UNS N08020) body, API 599, RTFE Sleeve and Packing
(6) PLUG VALVES
2" to 12" Class 150 RF Flanged A351-CN7M body, API 599, RTFE Sleeve and Packing (6)
Notes: Notes (1) through (9) of 10.28.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 323 of 403
10.28.3 Line Class: 103NT1C
Line Class: 103NT1C Basic Material: Alloy 20 Max. Temperature: 138°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 138 Pressure Rating (bar) (2) 41.4 35.3 32.8
Item
Size Rating
Schedule
Type
Specification
Notes 1½" and under Sch. 40S min. Seamless B464, (UNS N08020) (1)
PIPE 2" to 12" Sch 10S min. Seamless B464 or B474,
(UNS N08020) (1)
1½" and under Class acc. to B16.11 Socketweld B366, (UNS N08020), B16.11 (4) FITTINGS
El's, Tees Reducers, Caps, Couplings, etc.
2" and above Buttweld B366 (UNS N08020), B16.9 (5)
Nipples and Swages ½"-1½" Seamless B464 (UNS N08020)
Sockolets 1½" and under Class acc. to MSS SP97 Socketweld B462 (UNS N08020), B16.11 (4)
Weldolets 2" and above Buttweld B462 (UNS N08020), B16.9
1½" and under Class 300 Socketweld RF B462 (UNS N08020), B16.5
FLANGES 2" and above Class 300 Weldneck
RF B462 (UNS N08020), B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 1.5 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or equal.
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BB, OS&Y, Trim No.13
(6) GATE VALVES
2" to 12" Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BB, OS&Y, Trim No.13
(6) GLOBE VALVES
2" to 12" Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
1½" and under Class 800 Socketweld B462 (UNS N08020) body, BC, Trim No.13
(6) CHECK VALVES
2" to 12" Class 300 RF Flanged A351-CN7M body, BC, Trim No.13
(6)
1½" and under Class 800 Socketweld with nipples
B462 (UNS N08020) body, API 599, RTFE Sleeve and Packing
(6) PLUG VALVES
2" to 12" Class 300 RF Flanged A351-CN7M body, API 599, RTFE Sleeve and Packing (6)
Notes: Notes (1) through (9) of 10.28.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 324 of 403
10.28.4 Line Class: 103NY1C
Line Class: 103NY1C Basic Material: Hastelloy C Max. Temperature: 125°C Stress Relief: Per Code Service: Caustic Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 125 Pressure Rating (bar) (2) 51.7 50.9 50.0
Item
Size Rating
Schedule
Type
Specification
Notes 1½" and under Sch. 40S min. Seamless B619, (UNS N06003) as
applicable (1) PIPE
2" to 12" Sch 10S min. Seamless B619, (UNS N06003) as applicable (1)
1½" and under Class acc. to B16.11 Socketweld B366, (UNS N06003), B16.11 (4) FITTINGS
El's, Tees Reducers, Caps, Couplings, etc.
2" and above Buttweld B366 (UNS N06003), B16.9 (5)
Nipples and Swages ¾”-1½" Seamless B464 (UNS N06003)
Sockolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded B462 (UNS N06003), B16.11 (4)
Weldolets 2" and above Buttweld B462 (UNS N06003), B16.9
1½" and under Class 300 Socketweld RF B462 (UNS N06003), B16.5
FLANGES 2" and above Class 300 Weldneck
RF B462 (UNS N06003), B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 1.5 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or equal.
1½" and under Class 800 Socketweld B462 (UNS N06003) body, BB, OS&Y, Trim No. N06003
(6) GATE VALVES
2" to 12" Class 300 RF Flanged Hastelloy C UNS N06003 body, BB, OS&Y, Trim No. N06003
(6)
1½" and under Class 800 Socketweld B462 (UNS N06003) body, BB, OS&Y, Trim No. N06003
(6) GLOBE VALVES
2" to 12" Class 300 RF Flanged Hastelloy C UNS N06003 body, BB, OS&Y, Trim No. N06003
(6)
1½" and under Class 800 Socketweld B462 (UNS N06003) body, BC, Trim No. N06003
(6) CHECK VALVES
2" to 12" Class 300 RF Flanged Hastelloy C UNS N06003 body, BC, Trim No. N06003
(6)
PLUG VALVE 1½" and under Class 800 Socketweld with nipples
Hastelloy C UNS N06003 body, API 599, RTFE Sleeve and Packing
(6)
2" to 12" Class 300 RF Flanged B462 (UNS N06003) body, API 599, RTFE Sleeve and Packing
(6)
Notes: Notes (1) through (9) of 10.28.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 325 of 403
10.29 Specialty Alloy Steel for Sulfuric Acid Services Line Classes
10.29.1 Line Classes Notes
The following Notes shall apply to all of this carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) For use at temperatures less than -29°C, the requirements of ASME B31.3 para. 323 shall be applied.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 326 of 403
10.29.2 Line Class: 101NT0A
Line Class: 101NT0A Basic Material: Alloy 20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid 93%-96% concentr. Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25
Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 118 Pressure Rating (bar) (2) 15.9 13.5 13.1
Item
Size Rating
Schedule
Type
Specification
Notes 1½" and under Sch. 40S min. Seamless B464, (UNS N08020) (1) PIPE
2" to 12" Sch 10S min. Seamless B464 (UNS N08020) (1) FITTINGS
El's, Tees
Reducers, Caps, Couplings, etc.
¾” and above Buttweld B366 (UNS N08020), B16.9 (5)
Weldolets ¾” and above Buttweld B462 (UNS N08020), B16.9
FLANGES ¾” and above Class 150 Weldneck RF B462 (UNS N08020), B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 1.5 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or equal.
Gate Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Globe Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Check Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BC, Trim No.13
(6)
Ball Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe
(6)(7)
Notes: Notes (1) through (9) of 10.29.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 327 of 403
10.29.3 Line Class: 101NT1A
Line Class: 101NT1A Basic Material: Alloy 20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid 93%-96% concentr. Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25
Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 118 Pressure Rating (bar) (2) 15.9 13.5 13.1
Item
Size Rating
Schedule
Type
Specification
Notes 1½" and under Sch. 40S min. Seamless B464, (UNS N08020) (1) PIPE
2" to 12" Sch 10S min. Seamless B464 (UNS N08020) (1) FITTINGS
El's, Tees
Reducers, Caps, etc.
¾” and above Buttweld B366 (UNS N08020), B16.9 (5)
Weldolets ¾” and above Buttweld B462 (UNS N08020), B16.9
FLANGES ¾” and above Class 150 Weldneck RF B462 (UNS N08020), B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 1.5 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or equal.
Gate Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Globe Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Check Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, BC, Trim No.13
(6)
Ball Valves ¾” to 12" Class 150 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe
(6)(7)
Notes: Notes (1) through (9) of 10.29.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 328 of 403
10.29.4 Line Class: 101NT9A
Line Class: 101NT9A Basic Mat.: Zecor™+Alloy 20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid 93%-96% concentr. Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25
Rating Class: 150 RF B16.5 Corrosion Allowance: 0.8 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 118 Pressure Rating (bar) (2) 15.9 13.5 13.1
Item
Size
Rating Schedule
Type
Specification
Notes
¾” and under Sch. 40S min. Seamless B464 (UNS N08020) (1) PIPE 1" and above Sch. 10S min. Seamless Zecor™ (1)
¾” and under Socketweld B462 (UNS N08020), B16.11 FITTINGS
El's, Tees
Reducers, Caps, etc.
1” and above Buttweld Zecor™, B16.9 (5)
Extruded Outlets ½” and above Buttweld Zecor™, MSS-SP97 Stub in 1½” and above Buttweld 316L SS reinforcement pad
¾” and under Socketweld RF B462 (UNS N08020), B16.5
FLANGES 1” and above Lap Joint
A105 Epoxy painted or A182 Gr. F304
Stub end shall be of Zecor™
(8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 3.0 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or Goretex GR
Gate Valves ½” and above Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Plug Valve ½” and above Class 150 RF Flanged A351-CN7M body, BB, Alloy 20 Plug, TFE sleeve & Trim
(6)
Globe Valves ½” and above Class 150 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Check Valves ½” and above Class 150 RF Flanged A351-CN7M body, BC, Trim No.13
(6)
Ball Valves ½” and above Class 150 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe
(6)(7)
3” to 12” Class 150 Wafer Butterfly Valves 14” and above Class 150 Lug
A351-CN7M body, Alloy 20 Stem, Disc and Pin, TFE Seats, Shaft Bearing and Packing
Needle Valve ½” Class 3000 Threaded
A351-CN7M body, Screwed bonnet rising stem, inside screw, needle point disc integral with stem, integral seats TFE packing
Sampling Valve ¼” to ¾” Class 300 Threaded male
inlet Plain end outlet
A351-CN7M body, outside stem thread, union bonnet, rising stem, needle point disc integral with stem, renewable TFE seats, TFE packing
Notes: Notes (1) through (9) of 10.29.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 329 of 403
10.29.5 Line Class: 103NT0A
Line Class: 103NT0A Basic Material: Alloy 20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 118 Pressure Rating (bar) (2) 41.4 35.3 34.1
Item
Size Rating
Schedule
Type
Specification
Notes 12" and under Sch. 40S min. Seamless B464 (UNS N08020) (1) 14" and 16" S-10S as min Seamless B464 (UNS N08020) (1) PIPE 18" and 20" calculate Seamless B464,
(UNS N08020) (1)
FITTINGS
El's, Tees Reducers, Caps,
etc.
¾” and above Buttweld B366 (UNS N08020), B16.9 (5)
Weldolets ¾” and above Buttweld B462 (UNS N08020), B16.9
FLANGES ¾” and above Class 300 Weldneck RF B462 (UNS N08020), B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 1.5 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or equal.
Gate Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Globe Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Check Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BC, Trim No.13
(6)
Ball Valves ¾” and above Class 300 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals,
Trim No.13, fire safe
(6)(7)
Notes: Notes (1) through (9) of 10.29.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 330 of 403
10.29.6 Line Class: 103NT1A
Line Class: 103NT1A Basic Material: Alloy 20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 118 Pressure Rating (bar) (2) 41.4 35.3 34.1
Item
Size Rating
Schedule
Type
Specification
Notes 12" and under Sch. 40S min. Seamless B464 (UNS N08020) (1) 14" and 16" S-STD Seamless B464 (UNS N08020) (1) PIPE 18" and 20" S-XS Seamless B464,
(UNS N08020) (1)
FITTINGS
El's, Tees Reducers, Caps,
etc.
¾” and above Buttweld B366 (UNS N08020), B16.9 (5)
Weldolets ¾” and above Buttweld B462 (UNS N08020), B16.9
FLANGES ¾” and above Class 300 Weldneck RF B462 (UNS N08020), B16.5 (8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 1.5 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, or equal.
Gate Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Globe Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Check Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BC, Trim No.13
(6)
Ball Valves ¾” and above Class 300 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals,
Trim No.13, fire safe
(6)(7)
Notes: Notes (1) through (9) of 10.29.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 331 of 403
10.29.7 Line Class: 103NT9A
Line Class: 103NT9A Basic Material: Zecor™+Alloy20 Max. Temperature: 118°C Stress Relief: Per Code Service: Sulfuric Acid Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.8 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -40 100 118 Pressure Rating (bar) (2) 41.4 35.3 34.1
Item
Size Rating
Schedule
Type
Specification
Notes ¾" and under Sch. 40S min. Seamless B464, (UNS N08020) (1) PIPE 1" and above Sch 10S min. Seamless Zecor™ (1)
¾” and under Socketweld B462 (UNS N08020), B16.11 FITTINGS
El's, Tees
Reducers, Caps, etc.
1” and above Buttweld Zecor™, B16.9 (5)
Extruded Outlets ½” and above Buttweld Zecor™, MSS-SP97 Stub in 1½” and above Buttweld 316L SS reinforcement pad
¾” and under Socketweld RF B462 (UNS N08020), B16.5
FLANGES 1” and above Lap Joint
A105 Epoxy painted or A182 Gr. F304
Stub end shall be of Zecor™
(8)
BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts. GASKETS Flat ring type face, 3.0 mm thick, PTFE/Filler Blend, Garlock's GYLON 3504, Goretex GR
Gate Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Plug Valve ½” and above Class 300 RF Flanged A351-CN7M body, BB, Alloy 20 Plug, TFE sleeve & Trim
(6)
Globe Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BB, OS&Y, Trim No.13
(6)
Check Valves ¾” and above Class 300 RF Flanged A351-CN7M body, BC, Trim No.13
(6)
Ball Valves ¾” and above Class 300 RF Flanged A351-CN7M body, floating ball, RTFE seats and seals, Trim No.13, fire safe
(6)(7)
3” to 12” Class 300 Wafer Butterfly Valves 14” and above Class 300 Lug
A351-CN7M body, Alloy 20 Stem, Disc and Pin, TFE Seats, Shaft Bearing and Packing
Needle Valve ½” Class 3000 Threaded
A351-CN7M body, Screwed bonnet rising stem, inside screw, needle point disc integral with stem, integral seats TFE packing
Sampling Valve ¼” to ¾” Class 300 Threaded male
inlet Plain end outlet
A351-CN7M body, outside stem thread, union bonnet, rising stem, needle point disc integral with stem, renewable TFE seats, TFE packing
Notes: Notes (1) through (9) of 10.29.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 332 of 403
10.30 Specialty Alloys For Ammonium Bisulfide Service Line Classes
10.30.1 Line Classes Notes
The following Notes shall apply to all of the alloy steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1. For Alloy 825 material based line class, fluid velocities shall be within the range of 10-50 ft/s (target 40 ft/s).
For Duplex S32205 material based line class, fluid velocities shall be within the range of 10-30 ft/s (target 25 ft/s).
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe. Dead legs shoul be avoided.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) Piping material shall be furnished in accordance with the requirements of JERES-A-301.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 333 of 403
10.30.2 Line Class: 103SP1N
Line Class: 103SP1N Basic Material: Duplex S32205 Max. Temperature: 316°C Stress Relief: Per Code Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Weld 100%XRay
Temperature (°C) (2) -48 100 150 200 300 316 Pressure Rating (bar) (2) 51.7 50.7 45.9 42.7 38.9 38..5
Item
Size Rating
Schedule
Type
Specification
Notes
PIPE ¾” and above To calculate Seamless
or Welded
A790 Gr. UNS S32205 (1) (2)
1½" and under
Class acc. to B16.11
Socketweld A182 Gr. F51, B16.11 (5) FITTINGS
El's Tees,
Reducers, Caps, Couplings etc. 2" and above Buttweld A815 Gr. UNS S32205
Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A790 Gr. UNS S32205
Sockolets 1½" and under Class acc. to MSS SP97 Socketweld A182 Gr. F51, MSS SP97
Weldolets 2" and above Buttweld A182 Gr. F51, MSS-SP97
1½" and under Class 300 Socketweld RF FLANGES
All Class 300 Weldneck RF A182 Gr. F51, B16.5
(8) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1 1/2 " and under Class 800 Socketweld A182 Gr. F51 body, BB, OS&Y, graphite packing, API 602, Trim 2205/HF
(6)
GATE VALVES
2" and above Class 300 RF Flanged A928 Gr. UNS S32205 body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim 2205/HF
(6)
1 1/2 " and under Class 800 Socketweld A182 Gr. F51 body, BB, OS&Y, graphite packing, Trim 2205/HF
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A928 Gr. UNS S32205, OS&Y, graphite packing, Trim 2205/HF
(6)
1 1/2 " and under Class 800 Socketweld A182 Gr. F510 body, BC, Trim 2205/HF
(6) CHECK VALVES
2" and above Class 300 RF Flanged A928 Gr. UNS S32205 body, BC, Trim 2205/HF
(6)
Notes: Notes (1) through (10) of 10.13.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 334 of 403
10.30.3 Line Class: 215NS1N
Line Class: 215NS1N Basic Material: Alloy 825 Max. Temperature: 538°C Stress Relief: Per Code Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25
Rat. Class: 1500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested, Welds 100%Xray
Temperature (°C) (2) -48 150 250 350 450 538 Pressure Rating (bar) (2) 258.6 250.8 231.8 201.1 169.0 125.5
Item Size Rating Schedule Type Specification Notes
PIPE Up to 8"
Seamless or Welded
B423 N08825 Seamless Annealed B705 N08825 Welded Annealed
(1) (2)
1½" and under
Socketweld B366 Gr. WPNICMC, B16.11 Annealed (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld B366 Gr. WPNICMC Annealed Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless B423 N08825 Annealed
Sockolets 1½" and under Socketweld B564 N08825 Annealed, MSS-SP97 Weldolets 2" and above Buttweld B564 N08825 Annealed, MSS-SP97
FLANGES All Class 1500 Weldneck RTJ B564 N08825 Annealed, B16.5 (8)
BOLTING A193 G. B7M stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2HM GASKETS Octagonal Ring N08825 B16.20
1½" and under Class 1500 Socketweld B564 N08825 body, WB, OS&Y, graphite packing, API 602, Trim N08825
(6)
GATE VALVES
2" and above Class 1500 RTJ Flanged B564 N08825 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim N08825
(6)
1½" and under Class 1500 Socketweld B564 N08825 body, WB, OS&Y, graphite packing, Trim N08825
(6) GLOBE VALVES
2" and above Class 1500 RTJ Flanged B564 N08825, PSB, OS&Y, graphite packing, Trim N08825
(6)
CHECK VALVES 3/4“ – 8” Class 1500 RTJ Flanged B564 N08825 body, PSB, Trim N08825, hydraulically tested, Swing type
(6)
Notes: Notes (1) through (9) of 10.30.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 335 of 403
10.30.4 Line Class: 225NS1N
Line Class: 225NS1N Basic Material: Alloy 825 Max. Temperature: 538°C Stress Relief: Per Code Service: Ammonium Bisulf. Code: ASME B31.3 Min. Temperature: -48°C Butt-weld Per ASME B16.25
Rat. Class: 2500 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested, Welds 100%Xray
Temperature (°C) (2) -48 150 250 350 450 538 Pressure Rating (bar) (2) 430.9 418.2 386.2 335.3 281.8 208.9
Item Size Rating Schedule Type Specification Notes
PIPE Up to 8" calculate Seamless or Welded
B423 N08825 Seamless Annealed B705 N08825 Welded Annealed
(1) (2)
FITTINGS
El's Tees, Reducers, Caps,
etc.
2" and above Buttweld B366 Gr. WPNICMC Annealed Seamless/Welded, B16.9 (5)
Weldolets 2" and above Buttweld B564 N08825 Annealed, MSS-SP97
FLANGES All Class 2500 Weldneck RTJ B564 N08825 Annealed, B16.5 (8)
BOLTING A193 G. B7M stud bolts, heavy pattern with heavy hex nuts A194 Gr. 2HM GASKETS Octagonal Ring N08825 B16.20
1½" and under Class 2500 RTJ Flanged B564 N08825 body, WB, OS&Y, graphite packing, API 602, Trim N08825
(6)
GATE VALVES
2" and above Class 2500 RTJ Flanged B564 N08825 body, Wedge type: PSB, OS&Y, graphite packing, API 600, Trim N08825
(6)
1½" and under Class 2500 RTJ Flanged B564 N08825 body, WB, OS&Y, graphite packing, Trim N08825
(6) GLOBE VALVES
2" and above Class 2500 RTJ Flanged B564 N08825, PSB, OS&Y, graphite packing, Trim N08825
(6)
CHECK VALVES 3/4“ – 8” Class 2500 RTJ Flanged B564 N08825 body, PSB, Trim N08825, hydraulically tested, Swing type
(6)
Notes: Notes (1) through (9) of 10.30.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 336 of 403
10.31 Specialty Alloys For Chlorination Service Line Classes
10.31.1 Line Classes Notes
The following Notes shall apply to all of the alloy steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Threaded connections only allowed downstream of vents, drains, hydrotest connections, and instrument take-offs. Threaded O'lets only allowed for thermowell and hydrotest connections.
(3) Schedule of fittings and weldneck flanges to be same as pipe.
(4) Use flanges.
(5) Use ¾" valves for vent and drain connections
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 337 of 403
10.31.2 Line Class: 201NR1Q
Line Class: 201NR1Q Basic Material: Alloy 800H Max. Temperature: 538°C Stress Relief: Per Code Service: Chlorination Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 150 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -29 150 250 350 450 538 Pressure Rating (bar) (2) 15.9 13.7 12.1 8.4 4.6 1.4
Item
Size Rating
Schedule
Type
Specification
Notes
1½” and under Sch. 80S min. Seamless B407, (UNS N08810) Annealed (1)
PIPE 2” to 8” Sch 10S min. Seamless B407, (UNS N08810)
Annealed (1)
1½” and under Class 3000 Socketweld/ Threaded
B564, (UNS N08810), B16.11 Annealed (3) FITTINGS
El’s, Tees
Reducers, Caps, Couplings, etc.
2” and above Buttweld B366, (UNS N08810) Annealed, B16.9 (3)
Nipples and Swages ½”-1½” Sch 80S Seamless B407, (UNS N08810)
Annealed
Sockolets/ Threadolets 1½” and under Class 6000 Socketweld/
Threaded B564, (UNS N08810),
Annealed B16.11 (2)
Weldolets 2” and above Buttweld B366, (UNS N08810), B16.9 Annealed
1½” and under Class 150 Socketweld RJ
B564, (UNS N08810), B16.5 Annealed
FLANGES 2” and above Class 150 Weldneck
RJ B564, (UNS N08810), B16.5
Annealed (3)
BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Octagonal ring, Nickel 201, 95 BHN maximum hardness.
1½” and under Class 150 Socketweld A351-CT15C or
A494-CY-40 body and trim, BB, OS&Y, full port, API 602
(5)
Gate Valves
2” and above Class 150 RJ Flanged A351-CT15C or
A494-CY-40 body and trim, BB, OS&Y, API 600
1½” and under Class 150 Socketweld A351-CT15C or
A494-CY-40 body and trim, BB, OS&Y
Globe Valves
2” and above Class 150 RJ Flanged A351-CT15C or
A494-CY-40 body and trim, BB, OS&Y
1½” and under Class 150 Socketweld A351-CT15C or A494-CY-40 body and trim
Check Valves 2” and above Class 150 RJ Flanged A351-CT15C or
A494-CY-40 body and trim
Notes: Notes (1) through (5) of 10.31.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 338 of 403
10.31.3 Line Class: 203NR1Q
Line Class: 203NR1Q Basic Material: Alloy 800H Max. Temperature: 593°C Stress Relief: Per Code Service: Chlorination Code: ASME B31.3 Min. Temperature: -29°C Butt-weld Per ASME B16.25 Rat. Class: 300 RTJ B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Hydro. Tested
Temperature (°C) (2) -29 250 350 450 550 650 Pressure Rating (bar) (2) 41.4 32.3 29.4 27.2 25.0 14.1
Item
Size Rating
Schedule
Type
Specification
Notes 1½" and under Sch. 80S min. Seamless B407, (UNS N088(10) (1) PIPE
2" to 30" Sch 10S min. Seamless B407, (UNS N088(10) (1)
1½" and under Class 3000 Socketweld/ Threaded B564, (UNS N0088(10), B16.11 (3) FITTINGS
El's, Tees
Reducers, Caps, Couplings, etc.
2" and above Buttweld B366, (UNS N088(10), B16.9 (3)
Nipples and Swages ½"-1½" Sch 80S Seamless B407, (UNS N088(10)
Sockolets/ Threadolets 1½" and under Class 6000 Socketweld/
Threaded B564, (UNS N088(10), B16.11 (2)
Weldolets 2" and above Buttweld B366, (UNS N088(10), B16.9
1½" and under Class 300 Socketweld RJ B564, (UNS N088(10), B16.5
FLANGES 2" and above Class 300 Weldneck
RJ B564, (UNS N088(10), B16.5 (3)
BOLTING A193 B16 stud bolts, heavy pattern with A194 4 heavy hex nuts. GASKETS Octagonal ring, Nickel 210, 95 BHN maximum hardness.
1½" and under Class 300 Socketweld A351-CT15C or
A494-CY-40 body and trim, BB, OS&Y, full port, API 602
Gate Valves
2" and above Class 300 RJ Flanged A351-CT15C or
A494-CY-40 body and trim, BB, OS&Y, API 600
1½" and under Class 300 Socketweld A351-CT15C or
A494-CY-40 body and trim, BB, OS&Y
Globe Valves
2" and above Class 300 RJ Flanged A351-CT15C or
A494-CY-40 body and trim, BB, OS&Y
1½" and under Class 300 Socketweld A351-CT15C or A494-CY-40 body and trim, BC
Check Valves 2" and above Class 300 RJ Flanged A351-CT15C or
A494-CY-40 body and trim, BC
Notes: Notes (1) through (9) of 10.30.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 339 of 403
10.32 Couper Nickle and others for Water Services Line Classes
10.32.1 Line Classes Notes
The following Notes are on hold (To be confirmed in final version).
The following Notes shall apply to all of this couper nickle class family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Seamless or double-arc welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(10) Mechanical Joint
Refer to JERES-L-110 for approved mechanical joint joints such as dresser, positive seal coupling, LokRing type.
90/10 Copper Nickel pipe and fittings is normally used only in pipe sizes up to 4-inch NPS. It is used mainly for seawater but may be used for other corrosive water.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 340 of 403
10.32.2 Line Class: 301BD0W
Line Class: 301BD0W Basic Material: Copper Nickel Max. Temperature: 100°C Stress Relief: Per Code Service: Utilities, Fire Water Code: ASME B31.3 Min. Temperature: 0.0°C Butt-weld Per ASME B16.25 Rat. Class: 150 FF B16.1/B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: per EEMUA
Temperature (°C) (2) 0 38 50 75 100 Pressure Rating (bar) (2) 20.0 20 19.7 18.6 17.5
Item Size Rating Schedule Type Specification Notes
PIPE/TUBE ½" - 16" Calculate Seamless ½" - 2" Socket Weld FITTINGS
Elbows-90 deg 3" - 16" Long Radius Butt Weld (5) Elbows-45 deg 6" - 16" Long Radius Butt Weld
½" - 2" Socket Weld, 3" - 16" Butt Weld,
1½" x 1½" x 1" Socket Weld, Reducing Tees 6" x 6" x 4" -
16" x 16" x 12"
Match pipe
Butt Weld, Reducing
½" - 2" Socket Weld Couplings 1" x ½" -
2" x 1" Socket Weld, Reducing
Plug ½" Hexagon Reducers 3" x 2" - 16" x 10" Butt Weld, Concentric
Adapter 16mm API x ½ Male end for insertion into fitting Female Thread x Male
Socket Weld
EEMUA 144 C70610
Connectors ½" - 2" Socket weld, straight, with male threads for connecting Cu-Ni Pipe to Female Threaded Bronze Valves
EEMUA 146 C70610
2" - 4" Class 125/150 Composite, Blind Disc 90/10 Cu-Ni, ASME B16.5 dimensions, 5mm thick, to BS 2871
FLANGES 6" - 16" Class 150 Composite Slip
On
90/10 Cu-Ni (UNS C70610) to BS 2871, Part 2 and EEMUA Publication No. 145, Section 2.2 and 2.3.90/10 Cu-Ni inner stub end, ASTM, A105N backing flange, Class 150, Galv. to BS729
(8)
BLIND (BLANK) 2" - 4" Class 150 Forged steel, A105N, Flat Face, Galv. to BS 729 GASKETS 1.6 mm Synthetic fiber
BOLTING ASTM A193 B7 Stud Bolts,semi-finished, heavy patternASTM A194 2H hex nuts
2" and below Class 150 Threaded Bronze body and trim ASTM
B61/B62, ISRS, MSS-SP-80 (6) GATE VALVES
3" and above Class 150 FF Flanged Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BB
(6)
2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, ISRS, MSS-SP-80
(6) GLOBE VALVES
3" and above Class 150 FF Flanged Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BB
(6)
2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, MSS-SP-80
(6) CHECK VALVES
3" and above Class 150 FF Flanged Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BC
(6) BALL VALVES 2" and below Class 150 Threaded Bronze body and trim B61/B62, TFE seats, fire s. (6)(7) BUTTERFLY
VALVES 3" and above Class 150 wafer or lug or FF Flanged
Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR
Notes: Notes (1) through (10) of 10.32.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 341 of 403
10.32.3 Line Class: 101CS2W
Line Class: 101CS2W Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: WWT, Sanitary W. Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating
Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3" to 4” S-80
6" to 10” S-40 12" to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3)
1½" and under Class acc. to B16.11 Socketweld/ Threaded A105N, B16.11 (5) FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets/ Threadolets 1½" and under Class acc. To MSS
SP 97 Socketweld/
Threaded A105N
MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 150 Socketweld RF FLANGES
2" and above Class 150 Weldneck RF A105N, B16.5
(8) BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, API 602, Trim No. 8
(6) GATE VALVES
2" and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
1½" and under Class 800 Socketweld/ Threaded
A105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6)
1½" and under Class 800 Socketweld/ Threaded A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats,Trim No. 10, fire safe (6)(7)
2" to 4" Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10 (6)(7) BALL VALVES
6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP (6)(7)
1½" and under Class 600 Socketweld/ Threaded
A105N body, BC, not-lubricat.,PTFE Sleeve and Pack.,
(6) PLUG VALVES
2" and above Class 150 RF Flanged A216-WCB body, BC PTFE Sleeve and Pack. API 599,
(6) BUTTERFLY
VALVES 4" and above Class 150 Lugged or RF Flanged
A395 body, fire-safe, API 609 Cat. A, Seats: Buna-N, Ductile Iron Disc
Notes: Notes (1) through (10) of 10.32.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 342 of 403
10.32.4 Line Class: 101CS4W Line Class: 101CS4W Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: WWT, Brine Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
Up to 2" S-XXS 3" S-160 4" S-120 6” S-80
8” to 10” S-60 12” to 16” S-40
18” S-30
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above Calculate Welded API 5L Gr B (3) FITTINGS El's Tees,
Reducers, Caps, etc.
1" and above
Buttweld A234-Gr. WPB, B16.9 (5)
Weldolets 1” and above Buttweld A 105N MSS SP 97
FLANGES 1” and above Class 150 Weldneck RF A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
2" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No. 8
(6) GATE VALVES
2½" and above Class 150 RF Flanged A216-WCB body,BB, OS&Y, graphite packing, API 600, Trim No. 8
(6)
2" and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 8
(6) GLOBE VALVES
2½" and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 8
(6) 2" and under Class 150 RF Flanged A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2½" and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 1 (6) 2" and under Class 150 RF Flanged A105N body, floating ball, RTFE
seats,Trim No. 10, fire safe (6)(7)
2" to 4" Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(6)(7) BALL VALVES
6" and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D, Trim ENP
(6)(7)
1½" and under Class 150 RF Flanged A105N body, BC, not-lubricat.,PTFE Sleeve and Pack.,
(6) PLUG VALVES
2" and above Class 150 RF Flanged A216-WCB body, BC PTFE Sleeve and Pack. API 599,
(6) BUTTERFLY
VALVES 4" and above Class 150 Lugged or RF Flanged
A395 body, fire-safe, API 609 Cat. A, Seats: Buna-N, Ductile Iron Disc
Notes: In addition to the notes (1) through (10) of 10.32.1
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 343 of 403
10.32.5 Line Class: 101SR0W
Line Class: 101SR0W Basic Material: SS 304 Max. Temperature: 538°C Stress Relief: Per Code Service: Potable, serv. Wat. Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.2 12.1 8.4 4.6 1.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304 PIPE
8" and above S-10S as minimum Welded A358 Gr. 304 Cl. 1
1½" and under
Socketweld/ Threaded A182 Gr. F304, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A312 Gr. TP304
Sockolets/ Threadolets 1½" and under Socketweld/
Threaded A182 Gr. F304, MSS-SP97
Weldolets 2" and above Buttweld A182 Gr. F304, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F304, B16.5 (8) FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F304, B16.5 BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10
(6)
1½” and under Class 300 Socketweld/ with nipples
A182-F304 body, floating ball, RTFE seats, Trim No. 10, fire safe
(6)(7)
BALL VALVES
2” and above Class 150 RF Flanged A351-CF8M body, floating ball, RTFE seats, fire safe, API 608,Trim No. 10
(6)(7)
BUTTERFLY VALVES 4" and above Class 150 Lugged or RF
Flanged A351-CF8M body, API 609 Cat. A, Trim No. 10
Notes: Notes (1) through (10) of 10.32.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 344 of 403
10.32.6 Line Class: 103SR0W
Line Class: 103SR0W Basic Material: SS 304 Max. Temperature: 538°C Stress Relief: Per Code Service: Treated Wat Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP304 PIPE
8" and above S-10S as minimum Welded A358 Gr. 304 Cl. 1
1½" and under
Socketweld/ Threaded A182 Gr. F304, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A312 Gr. TP304
Sockolets/ Threadolets 1½" and under Socketweld/
Threaded A182 Gr. F304, MSS-SP97
Weldolets 2" and above Buttweld A182 Gr. F304, MSS-SP97
1½" and under Class 300 Socketweld RF A182 Gr. F304, B16.5 (8) FLANGES
2" and above Class 300 Weldneck RF A182 Gr. F304, B16.5 BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 300 RF Flanged
A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10
(6) BUTTERFLY
VALVES 4" and above Class 300 Lugged or RF Flanged
A351-CF8M body, API 609 Cat. A, Trim No. 10
Notes: Notes (1) through (10) of 10.32.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 345 of 403
10.32.7 Line Class: 106SR0W
Line Class: 106SR0W Basic Material: SS 304 Max. Temperature: 538°C Stress Relief: Per Code Service: Treated Wat Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 49.6 37.0 32.5 29.6 27.4 24.4
Item
Size Rating
Schedule
Type
Specification
Notes
Up to 6" S-40S as min
Seamless
A312 Gr. TP304
8” to 12” S-40S as min PIPE
14" and above calculate Welded A358 Gr. 304 Cl. 1
1½" and under
Socketweld/ Threaded A182 Gr. F304, B16.11 (5)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP304 Seamless/Welded, B16.9
Nipples and Swages 2" and under Seamless A312 Gr. TP304
Sockolets/ Threadolets 1½" and under Socketweld/
Threaded A182 Gr. F304, MSS-SP97
Weldolets 2" and above Buttweld A182 Gr. F304, MSS-SP97
1½" and under Class 600 Socketweld RF A182 Gr. F304, B16.5 (8) FLANGES
2" and above Class 600 Weldneck RF A182 Gr. F304, B16.5 BOLTING A193 B7 stud bolts, heavy pattern with A194 2H heavy hex nuts up to 425°C. GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(6)
GATE VALVES
2" and above Class 600 RF Flanged
A351 Gr. CF8M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(6)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F304 body, BB, OS&Y, graphite packing,Trim No. 12
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8M, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F304 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 600 RF Flanged A351 Gr. CF8M body, BC, Trim No. 10
(6) BUTTERFLY
VALVES 4" and above Class 600 Lugged or RF Flanged
A351-CF8M body, API 609 Cat. A, Trim No. 10
Notes: Notes (1) through (10) of 10.32.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 346 of 403
10.33 Non-Metallic Line Classes
10.33.1 Line Classes Notes
The following Notes are on hold (To be confirmed in final version). Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Seamless or double-arc welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) Additional
PVC/UPVC pipe and fittings are used for water services, except for dedicated firewater, up to a temperature of 49°C, normally below ground. SAS 14/15 class 5 pipe for water services outside buildings and ASTM D1785 schedule 80 pipe for inside and outside buildings. Refer to JERES-S-040 and JERES-S-060.
CPVC pipe and fittings are used for hot water service up to 71°C temperature. Other refinery services include sodium hypochlorite, chlorinated water. Refer to JERES-L-1032 and JERES-S-060.
Reinforced thermosetting resin (RTR) pipe and fittings per 01-JERMS-1034 with restrained and unrestrained joints may be used for water services within the given pressure/temperature limits, including buried firewater piping. It may also be used for sanitary sewer, oily water sewer, and other gravity and pressure sewers.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 347 of 403
10.33.2 Line Class: 301FE0P
Line Class: 301FE0P Basic Material: Fiberglass Max. Temperature: 100°C Stress Relief: Not Applicable Service: Sea Water Code: ASME B31.3 Min. Temperature: 0.0°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) 0 100 Pressure Rating (bar) (2) 17.5 17.5
Item Size Rating Schedule Type Specification Notes
PIPE 50 - 3700 mm Refer to JERMS-L-1034
Refer to JERMS-L-
1034
JERMS-L-1034 RTR Pipe and Fittings, 0 to 100°C
FITTINGS & FLANGES 50 - 3700 mm Refer to
JERMS-L-1034
Refer to JERMS-L-
1034
Shall be made by the Manufacturer supplying the pipe (5)(8)
GASKETS 3.2 mm 50-60 Shore A durometer elastomeric Full face elastomeric, 50-60 Shore A durometer
BOLTING All Sizes ASTM A307 Grade A or B bolts with ASTM A563 Grade A heavy hex nuts
CHECK VALVES 2" and above Class 150 wafer or lug
or FF Flanged
A105N, Dual plate, Seating BUNA-N, Al-BR Disc,Spring Inconel (6)
BUTTERFLY VALVES 2" and above Class 150
wafer or lug or FF
Flanged
DI A395 PTFE/EPDM Lined, API 609, 17-4PH stem, EPDM coated disc, PTFE packing
PLUG VALVES 2" and above Class 150 FF Flanged DI A395 PTFE/EPDM Lined, BC, PFA coated ductile iron plug, diaphragm PTFE
(6)
DIAPHRAGM VALVE 2” and above Class 150 FF
Flanged DI A395, internally rubber coated, EPDM sealing
Notes: Notes (1) through (9) of 10.33.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 348 of 403
10.33.3 Line Class: 301FE0W
Line Class: 301FE0W Basic Material: Fiberglass Max. Temperature: 100°C Stress Relief: Not Applicable Service: Utility Water Code: ASME B31.3 Min. Temperature: 0.0°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) 0 100 100 Pressure Rating (bar) (2) 17.5 17.5 17.5
Item Size Rating Schedule Type Specification Notes
PIPE 25 - 3700 mm
Refer to JERMS-L-1034
Refer to JERMS-L-
1034
JERMS-L-1034 RTR Pipe and Fittings, 0 to 100°C
FITTINGS & FLANGES 25 - 3700 mm Refer to
JERMS-L-1034
Refer to JERMS-L-
1034
Shall be made by the Manufacturer supplying the pipe (5)(8)
GASKETS 3.2 mm 50-60 Shore A durometer elastomeric
Full face elastomeric, 50-60 Shore A durometer
BOLTING All Sizes ASTM A307 Grade A or B bolts with ASTM A563 Grade A heavy hex nuts
2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, ISRS, MSS-SP-80
(6) GATE VALVES
3" and above Class 150 FF Flanged
Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BB
(6)
2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, ISRS, MSS-SP-80
(6) GLOBE VALVES
3" and above Class 150 FF Flanged
Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BB
(6)
2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, MSS-SP-80
(6) CHECK VALVES
3" and above Class 150 FF Flanged
Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BC
(6)
BALL VALVES 2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, TFE seats, fire safe
(6)(7)
BUTTERFLY VALVES 3" and above Class 150
wafer or lug or FF Flanged
Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR
Notes: Notes (1) through (9) of 10.33.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 349 of 403
10.33.4 Line Class: 301FE0A
Line Class: 301FE0A Basic Material: Fiberglass Max. Temperature: 82°C Stress Relief: Not Applicable Service: Weak sulfuric acid 2% - 30% Code: ASME B31.3 Min. Temperature: 0.0°C Butt-weld: Manufact. Stand.
Rating Class: 150 FF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) 0 82 Pressure Rating (bar) (2) 5.2 5.2
Item Size (ID) Rating Schedule Type Specification Notes
6” smaller 6,35 mm as minimum 8” to 10” 7.93 mm
12” to 14” 9,53 mm 16” 11.12 mm
18” to 20” 12,7 mm 24” 15.88 mm
PIPE
30” 19,05 mm
Refer to JERMS-L-1034
Reinforced Vinyl Ester Pipe Hetron 922 or approved resin
FITTINGS & FLANGES 25 - 3700 mm Refer to
JERMS-L-1034
Refer to JERMS-L-1034
Shall be made by the Manufacturer supplying the pipe, no miter elbow. However, saddle fabricated pipe to pipe fittings in lieu of tees are acceptable
(5)(8)
GASKETS 3.2 mm elastomeric
Full face Butyl Rubber, 50-60 Shore A durometer
BOLTING All Sizes ASTM A307 Grade A or B bolts with ASTM A563 Grade A heavy hex nuts
(6) PLUG VALVES All Class 150 FF Flanged
Teflon Lined DI , BB, Viton Sleeve and Packing (6)
(6) CHECK VALVES All Class 150 FF Flanged
Teflon Lined DI , BB, Viton Seats and Seal (6)
BALL VALVES All Class 150 FF Flanged
Teflon Lined DI , BB, Viton Seats and Packing, fire safe
(6)(7) BUTTERFLY
VALVES All Class 150 FF Flanged
Teflon Lined DI , BB, PFA lined disc Viton Seat and Seal
Notes: Notes (1) through (9) of 10.33.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 350 of 403
10.33.5 Line Class: 301PU0A
Line Class: 301PU0A Basic Material: C-PVC Max. Temperature: 82°C Stress Relief: Not Applicable Service: Weak sulfuric acid 2% - 30% Code: ASME B31.3 Min. Temperature: 4.0°C Butt-weld: Manufact. Stand.
Rating Class: 150 FF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) 4.0 82 Pressure Rating (bar) (2) Gravity Drain/Atmosphere
Item Size Rating Schedule Type Specification Notes
PIPE ½"- 6" Sch. 80 CPVC ASTM F441 CPVC 4120
(5)
FITTINGS FOR SOLVENT WELD
JOINTS Bushings Couplings
Elbows Tees
½"- 6" Sch. 80 CPVC ASTM F439 CPVC 4120, Sch. 80
Pipe Union ½"- 3" Sch. 80 CPVC ASTM F439 CPVC female socket by male IPS adaptor
FLANGES
Socket Type
¾"- 6" Class 150, Sch. 80 Flat Face ASTM F439 CPVC, Sch. 80
Class 150 FF (8)
Threaded type ½"- 2" Class 150, Sch. 80 Flat Face ASTM F437 CPVC
Class 150 FF
GASKETS 3.2 mm elastomeric Butyl Rubber Full Face, 50-60 Shore A durometer
BOLTING All Sizes ASTM A307 Grade A or B
bolts, ASTM A563 Grade A heavy hex nuts
SOLVENT CEMENT ASTM F493 CPVC to PVC or CPVC
GATE VALVES 4" and larger Class 150 FF Flanged Forged Steel body, BB, OS&Y, 316 SS Stem, Integral Seats, TFE pack, Gask Spiral woun 316+TFE
(6)
BUTTERFLY VALVES 4" and larger Class 150
Wafer or Lug or
FF Flanged
Ductile iron PTFE lined body, PFA (or PTFE) encapsulated disc, Graphite filled phenolic bearings, Viton stem seals
PLUG VALVE ½" and above Class 150 FF Flanged DI body, BB, Electrically grounded 316 plug, TFE sleeve and diaphragm (6)
Notes: Notes (1) through (9) of 10.33.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 351 of 403
10.33.6 Line Class: 301PU0P
Line Class: 301PU0P Basic Material: C-PVC Max. Temperature: 80°C Stress Relief: Not Applicable Service: Calcium Hypocl. Sol. A/G Code: ASME B31.3 Min. Temperature: 4.0°C Butt-weld: Manufact. Stand.
Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) 4 80 Pressure Rating (bar) (2) 8.0 8.0
Item Size Rating Schedule Type Specification Notes
PIPE ½"- 3" Sch. 80 CPVC ASTM F441 CPVC 4120
FITTINGS FOR SOLVENT WELD
JOINTS Bushings Couplings
Elbows Tees
½"- 3" Sch. 80 CPVC ASTM F439 CPVC 4120, Sch. 80
(5)
Pipe Union ½"- 3" Sch. 80 CPVC ASTM F439 CPVC female socket by male IPS adaptor
FLANGES
Socket Type
¾"- 3" Class 150, Sch. 80 Flat Face ASTM F439 CPVC, Sch. 80
Class 150 FF (8)
Threaded type ½"- 3" Class 150, Sch. 80 Flat Face ASTM F437 CPVC
Class 150 FF
GASKETS 3.2 mm 50-60 Shore A durometer elastomeric Full face elastomeric,
50-60 Shore A durometer
BOLTING All Sizes ASTM A307 Grade A or B
bolts, ASTM A563 Grade A heavy hex nuts
SOLVENT CEMENT ASTM F493 CPVC to PVC or CPVC Ball Valves
And Ball Check Valves
3" and smaller 150 psi Threaded
Socketweld Flanged FF
CPVC ASTM D1784 CL. 23447-B body and ball, EPDM seats, double union, fire safe
(6)(7)
Notes: Notes (1) through (9) of 10.33.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 352 of 403
10.33.6 Line Class: 301PU0W
Line Class: 301PU0W Basic Material: C-PVC Max. Temperature: 80°C Stress Relief: Not Applicable Service: Utility Water U/G Code: ASME B31.3 Min. Temperature: 4.0°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) 4 80 Pressure Rating (bar) (2) 8.0 8.0
Item Size Rating Schedule Type Specification Notes
PIPE ½"- 6" Sch. 80 CPVC ASTM F441 CPVC 4120
FITTINGS FOR SOLVENT WELD
JOINTS Bushings Couplings
Elbows Tees
½"- 6" Sch. 80 CPVC ASTM F439 CPVC 4120, Sch. 80
(5)
Pipe Union ½"- 3" Sch. 80 CPVC ASTM F439 CPVC female socket by male IPS adaptor
FLANGES
Socket Type
¾"- 6" Class 150, Sch. 80 Flat Face ASTM F439 CPVC, Sch. 80
Class 150 FF (8)
Threaded type ½"- 2" Class 150, Sch. 80 Flat Face ASTM F437 CPVC
Class 150 FF
GASKETS 3.2 mm 50-60 Shore A durometer elastomeric Full face elastomeric,
50-60 Shore A durometer
BOLTING All Sizes ASTM A307 Grade A or B
bolts, ASTM A563 Grade A heavy hex nuts
SOLVENT CEMENT ASTM F493 CPVC to PVC or CPVC
GATE VALVES 4" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BB, ASTM B61/B62 bronze trim (less than 16% zinc)
(6)
CHECK VALVES 4" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BC, ASTM B61/B62 bronze trim (less than 16% zinc)
(6)
GLOBE VALVES 4" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BB, ASTM B61/B62 bronze trim (less than 16% zinc)
(6)
BUTTERFLY VALVES 4" and larger 200 psig min.
Wafer or Lug or
FF Flanged
Ductile iron ASTM A395 rubber lined body, stem packing integral with liner, protected SS stem, AL-BR disc (less than 16% zinc), Monel pins
Ball Valves And
Ball Check Valves ½" and above 150 psi
Threaded Socketweld Flanged FF
CPVC ASTM D1784 CL. 23447-B body and ball, EPDM seats, double union, fire safe
(6)(7)
Notes: Notes (1) through (9) of 10.33.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 353 of 403
10.33.7 Line Class: 501PD0P
Line Class: 501PD0P Basic Material: HDPE Max. Temperature: 80°C Stress Relief: Not Applicable Service: Utility Chem. Prod. Code: ASME B31.3 Min. Temperature: 4.0°C Butt-weld: Manufact. Stand. Rating Class: 150 B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) 4 80 Pressure Rating (bar) (2) 10.0 10.0
Item Size Rating Schedule Type Specification Notes
PIPE 4” to 16” Class 150 FM HDPE D3350/D3035-DR11/F714-DR11 PE3408
(5) FITTINGS Class 150 FM HDPE D3350/D3261-DR11 PE3408
(8)
FLANGES And flange adaptor 4” to 16” Class 150 FM D3350/D3261-DR11 PE3408
GASKETS 3.2 mm elastomeric Full face, neoprene, 55-65 Shore A durometer
Notes: Notes (1) through (9) of 10.33.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 354 of 403
10.33.8 Line Class: 301PV0W
Line Class: 301PV0W Basic Material: PVC/UPVC Max. Temperature: 50°C Stress Relief: Not Applicable Service: Undergr., Sanitary Code: ASME B31.3 Min. Temperature: 4.0°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) 4 23 38 50 Pressure Rating (bar) (2) 16 16 9.9 6.4
Item Size Rating Schedule Type Specification Notes
20 - 200 mm Class 5 PVC/uPVC PVC/uPVC, SAS 14/15 Class 5 Local Made Article
PIPE ½" - 6" Sch. 80 PVC/uPVC ASTM D1785
PVC 1120 OR 1220 FITTINGS FOR SOLVENT
WELD JOINTS (5) Bushings 20 - 200 mm Class 5 PVC/uPVC uPVC, SAS 14/15 Class 5 Couplings
Elbows Tees
Unions
½" - 6" Sch. 80 PVC/uPVC or CPVC
(0 to 50°C), ASTM F439 Sch. 80 CPVC 4120
(0 to 50°C)
Pipe Union ½" - 3" Sch. 80 CPVC ASTM F439 CPVC female socket by male IPS adaptor
DIN X ASTM ½ in x 20 mm Class 5 PVC/uPVC PVC/uPVC, SAS 14/15 ADAPTORS 3 in x 90 mm Sch. 80 or CPVC Class 5, Local Made Article FLANGES (8)
Socket Type ¾" - 8" Class 150 Sch. 80 Flat Face ASTM F439 CPVC Schedule 80 Class
150 FF
Threaded Type ½" - 2" Class 150 Sch. 80 Flat Face ASTM F437 CPVC Schedule 80 Class
150 FF
GASKETS 3.2 mm 50-60 Shore A durometer elastomeric Full face, elastomeric,
50-60 Shore A durometer
BOLTING All Sizes ASTM A307 Grade A or B bolts with ASTM A563 Grade A heavy hex nuts
SOLVENT CEMENT ASTM D2564 PVC to PVC ASTM F-493 CPVC to PVC or CPVC
2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, ISRS, MSS-SP-80
(6) GATE VALVES
3" and above Class 150 FF Flanged Bronze ASTM B61/B62 or AL-BR body, trim B61/B62 or Monel or AL-BR, BB
(6)
2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, ISRS, MSS-SP-80
(6) GLOBE VALVES
3" and above Class 150 FF Flanged Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR, BB
(6)
2" and below Class 150 Threaded Bronze body and trim ASTM B61/B62, MSS-SP-80
(6) CHECK VALVES
3" and above Class 150 FF Flanged Bronze ASTM B61/B62 or AL-BR body, trim B61/B62 or Monel or AL-BR, BC
(6)
BUTTERFLY VALVES 3" and above Class 150
wafer or lug or FF
Flanged
Bronze ASTM B61/B62 or AL-BR body, trim ASTM B61/B62 or Monel or AL-BR
Ball Valves And
Ball Check Valves ½" and above 150 psi
Threaded Socketweld Flanged FF
PVC ASTM D1784 CL. 12454-B or CPVC ASTM D1784 CL. 23447-B body and ball, EPDM seats, double union, fire safe
(6)(7)
Notes: Notes (1) through (9) of 10.33.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 355 of 403
10.34 Internally Lined Carbon Steel Line Classes
10.34.1 Line Classes Notes
The following Notes are on hold (To be confirmed in final version).
The following Notes shall apply to all of this lined carbon steel class family and shall be considered as an integral part of the individual line class.
Notes: (To be confirmed for final revision)
(1) Material selection:
Cement-lined steel pipe and fittings may be used for any non-acidic water and oily water service in 4-inch NPS or larger, below ground, above ground and in buildings. It is mainly intended for applications where plastic pipe is not permitted.
Fusion Bonded Epoxy-lined carbon steel piping may be used as alternate materials to cement-lined piping.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Seamless or double-arc welded, full-penetration straight welds.
(4) Seal Welding
Refer to JERES-L-110 for seal welding requirement of threaded connections.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(10) Mechanical Joint
Refer to JERES-L-110 for approved mechanical joint joints such as dresser, positive seal coupling, LokRing type.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 356 of 403
10.34.2 Line Class: 301LC0W
Line Class: 301LC0W Basic Material: Cem. Lin. C.S. Max. Temperature: 343°C Stress Relief: Not Applicable Service: Waste Water Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) -29 93 204 260 315 343 Pressure Rating (bar) (2) 17.2 16.2 13.8 11.7 9.7 8.6
Item Size Rating Schedule Type Specification
Notes
PIPE 4" and larger Calculate
Seamless or welded
ASTM A53 or API 5L,
Cement-lined per 01-JERMS-H-9005
FITTINGS
Elbows Tees Caps
Reducers
4" and larger Calculate to match pipe ASME B16.9 (5)
Sleeve Couplings 4" and larger Manufact. Standard FLANGES
Weld Neck
Slip-on Blinds
4" and larger Class 150 FF Bore to match pipe (8)
GASKETS 4" and larger 1.6 mm, Synthetic fiber
BOLTING Machine bolts ASTM A307 Gr. A or B
GATE VALVES 4" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BB, ASTM B61/B62 bronze trim (less than 16% zinc)
(6)
CHECK VALVES 4" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BC, ASTM B61/B62 bronze trim (less than 16% zinc)
(6)
GLOBE VALVES 4" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BB, ASTM B61/B62 bronze trim (less than 16% zinc)
(6)
BUTTERFLY VALVES 4" and larger 200 psig min.
Wafer or Lug or
FF Flanged
Ductile iron ASTM A395 rubber lined body, stem packing integral with liner, protected SS stem, AL-BR disc (less than 16% zinc), Monel pins
Notes: Notes (1) through (10) of 10.34.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 357 of 403
10.34.3 Line Class: 301LE0W
Line Class: 301LE0W Basic Material: Epoxy Lin. C.S. Max. Temperature: 93°C Stress Relief: Not Applicable Service: Waste Water Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) -29 93 Pressure Rating (bar) (2) 17.2 16.2
Item
Size
Rating Schedule
Type
Specification
Notes
PIPE 2" and larger Calculate Seamless or welded
ASTM A53 or API 5L Fusion Bonded Epoxy lined per
JERMS-H-9091
FITTINGS
Elbows Tees Caps
Reducers
2" and larger Calculate to match pipe ASME B16.9 (5)
FLANGES
Weld Neck Slip-on Blinds
2" and larger Class 150 FF ASME B16.5 (8)
GASKETS 2" and larger 1.6 mm, Synthetic fiber
BOLTING Machine bolts ASTM A307 Gr. B or ASME A193 B7 stud bolts semi-finished, heavy pattern A194 Gr. 2H hex nuts
GATE VALVES 2" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BB, ASTM B61/B62 bronze trim (less than 16% zinc)
(6)
CHECK VALVES 2" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BC, ASTM B61/B62 bronze trim (less than 16% zinc)
(6)
GLOBE VALVES 2" and larger Class 150 FF Flanged Ductile iron ASTM A395 epoxy lined body, BB, ASTM B61/B62 bronze trim (less than 16% zinc)
(6)
BUTTERFLY VALVES 2" and larger 200 psig min.
Wafer or Lug or
FF Flanged
Ductile iron ASTM A395 rubber lined body, stem packing integral with liner, protected SS stem, AL-BR disc (less than 16% zinc), Monel pins
Notes: Notes (1) through (10) of 10.34.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 358 of 403
10.34.4 Line Class: 301LT0P
Line Class: 301LT0P Basic Material: Teflon Lin. C.S. Max. Temperature: 93°C Stress Relief: Not Applicable Service: Spent Caustic Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 FF B16.5 – B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) Pressure Rating (bar) (2) Manufacturer design
Item
Size Rating
Schedule
Type
Specification
Notes
PIPE
1" and larger
40
Seamless or welded
ASTM A106 Gr. B/F423 Flanged
ends B16.5
FITTINGS
Elbows Tees Caps
Reducers
1" and larger 40 ASTM A234 WCB/F423 Flanged ends B16.5 (5)
FLANGES Lap Joint + Stub End Class 150 FF A105N ASME B16.5 (8)
GASKETS TFE Elastomeric Filler, 3mm BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts.
CHECK VALVES 1" and larger Class 150 FF Flanged ASTM A216 WCB PTFE lined body, BC, Horiz. Inst. PTFE ball (6)
DIAPHRAGM VALVES 1" and larger Class 150 FF Flanged
ASTM A395 PTFE lined body, PTFE Diaphragm, B16.42 Flanged
PLUG VALVES 1" and larger Class 150. FF Flanged ASTM A216 WCB PTFE Lined, PTFE Sleeve, API 599 (6)
Notes: Notes (1) through (10) of 10.34.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 359 of 403
10.34.5 Line Class: 101LT0A
Line Class: 101LT0A Basic Material: Teflon Lin. C.S. Max. Temperature: 160°C Stress Relief: Not Applicable Service: Sulfuric acid Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) -29 160 Pressure Rating (bar) (2) 10.3 10.3
Item
Size Rating
Schedule
Type
Specification
Notes
PIPE 1" and larger 40
Seamless or welded
ASTM A106 Gr. B/F423 Flanged ends B16.5
FITTINGS
Elbows Tees Caps
Reducers
1" and larger 40 ASTM A234 WCB/F423 Flanged ends B16.5 (5)
FLANGES Lap Joint + Stub End 1" and larger Class 150 RF Ductile Iron, Vanstone type
Or Screwed Flange 1" and larger Class 150 RF A536 Gr. 70-50-05 molded end
AWWA C110
(8)
GASKETS 1" and larger 3.2 mm, Gylon 3540 ring type BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts.
CHECK VALVES 1" and larger Class 150 RF Flanged ASTM A216 WCB PTFE lined body, BC, Ver. Up flow only inst., PTFE ball
(6)
BUTTERFLY VALVES 3" and larger Class 150 Wafer
Ductile Iron PTFE lined body, PFA encapsulated disc, neoprene stem seal,
PLUG VALVES 1" and larger Class 150. RF Flanged DI PTFE body liner, PTFE Sleeve, API 599 (6)
Notes: Notes (1) through (10) of 10.34.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 360 of 403
10.34.6 Line Class: 101LP0A
Line Class: 101LP0A Basic Material: Polypropylene Lined Carbon Steel Max. Temperature: 200°C Stress Relief: Not Applicable
Service: Sulfuric acid Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) -29 200 Pressure Rating (bar) (2) 10.3 10.3
Item
Size Rating
Schedule
Type
Specification
Notes
PIPE 1" and larger 40 Seamless or welded
ASTM A106 Gr. B/PP lined F1545, Flanged ends B16.5
FITTINGS
Elbows Tees Caps
Reducers
1" and larger Class 150 RF A216 WCB PP-Lined F1545, AWWA C110 – 150 RF B16.5 (5)
FLANGES
Slip-on Blinds
1" and larger Class 150 RF A105 PP-Lined F1545, ASME B16.5 (8)
GASKETS 1" and larger 3.2 mm, Gylon 3540 ring type BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts.
CHECK VALVES 1" and larger Class 150 RF Flanged ASTM A351-CN7M body, BC, Ver. Up flow only inst., Trim No.13
(6)
PLUG VALVES 1" and larger Class 150. RF Flanged ASTM A351-CN7M, Alloy 20 Plug, PP Sleeve, API 599
(6)
Notes: Notes (1) through (10) of 10.34.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 361 of 403
10.34.7 Line Class: 101LP0P
Line Class: 101LP0P Basic Material: Polypropylene Lined Carbon Steel Max. Temperature: 107°C Stress Relief: Not Applicable
Service: Neutralized Water Code: ASME B31.3 Min. Temperature: -29°C Butt-weld: Manufact. Stand. Rating Class: 150 RF B16.5-B16.42 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Manufact. Stand.
Temperature (°C) (2) -29 107 Pressure Rating (bar) (2) Manufacturer design
Item
Size
Rating Schedule
Type
Specification
Notes
PIPE 1" and larger S-40 minimum Seamless or welded
ASTM A53 or API 5L PP lined F1545 – 150 RF FLG
FITTINGS
Elbows Tees Caps
Reducers
1" and larger Class 150 RF A216 WCB PP-Lined F1545, AWWA C110 – 150 RF B16.5 (5)
FLANGES
Slip-on Blinds
1" and larger Class 150 RF A105 PP-Lined F1545, ASME B16.5 (8)
GASKETS 1" and larger 3.2 mm, Gylon 3540 ring type BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts.
CHECK VALVES 1" and above Class 150 wafer or lug
or RF Flanged
A395/A105N, Dual plate PFA Coated, EPDM Lined body,Seating BUNA-N, Al-BR Disc,Spring Inconel
(6)
PLUG VALVES 1" and above Class 150 RF Flanged DI A395 PTFE/EPDM Lined, BC, PFA coated ductile iron plug, diaphragm PTFE
(6)
BALL VALVES 1" and above Class 150 RF Flanged DI A395 PTFE/EPDM Lined, PTFE coated ball, floating typ, PTFE seats, fire safe
(6)(7)
DIAPHRAGM VALVE 1” and above Class 150 RF
Flanged DI A395, internally rubber coated, EPDM sealing
Notes: Notes (1) through (10) of 10.34.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 362 of 403
10.35 Carbon Steel for Benzene (≥ 95% WT) Service Line Classes.
10.35.1 Line Classes Notes
The following Notes shall apply to all of the carbon steel classes family and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration welds.
(4) Valve leakage
All block valves shall satisfy the following:
• Tightness class: “A” according to ISO-15848, part I, table 1. Test fluid shall be helium (class AH)
• Endurance class: CO2 (1500 cycles)
• Temperature class: 400°C according to ISO-15848, part I, table 3.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
(9) Minimum line size shall be of 1”.for line classes of 4.5 and 6.0 mm of corrosion allowance
(10) Surface Roughness shall be < 3.2 μm
(11) Gate and Globe valves shall have metallic bellow seals welded on both sides
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 363 of 403
10.35.2 Line Class: 101CS1XB
Line Class: 101CS1X Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Benzene (≥95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
¾" Sch 160 1" to 2" Sch 80 3" to 10” S-40 12” to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N MSS SP 97
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 150 Socketweld RF SM (10)
FLANGES 2" and above Class 150 Weldneck RF
SM
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, BST, API 602, Trim No.8 (11)
GATE VALVES 2" and above Class 150 RF Flanged
SM A216-WCB body, BB, OS&Y, BST, API 600, Trim No. 8 (6)
1½” and under Class 800 Socketweld A105N body, BB, OS&Y, BST, Trim No. 8
(6) GLOBE VALVES
2” and above Class 150 RF Flanged SM
A216-WCB body, BB, OS&Y, BST, Trim No. 8
(6) 1½” and under Class 800 Socketweld A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2” and above Class 150 RF Flanged
SM A216-WCB body, BC, Trim No. 1 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe
(6)(7)
2” to 4” Class 150 RF Flanged SM
A216-WCB body, floating ball, RTFE seats, fire s., API 6D, Graphite Packing, Trim N.10
(6)(7) BALL VALVES
6” and above Class 150 RF Flanged SM
A216-WCB body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP
(6)(7)
BUTTERFLY VALVES 26” and above Class 150 RF Flanged
SM A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP (10)
Notes: Notes (1) through (10) of 10.13.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 364 of 403
10.35.3 Line Class: 101CS2XB
Line Class: 101CS2X Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Benzene (≥95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29 100 200 300 375 425 Pressure Rating (bar) (2) 19.6 17.7 13.8 10.2 7.4 5.5
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1” to 2” S-160 3" to 4” S-80
6" to 10” S-40 12" to 18” S-20
Seamless A106 Gr. B or API 5L Gr. B
(1) (2) PIPE
20” and above calculate Welded API 5L Gr. B (3) 1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N MSS SP 97
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 150 Socketweld RF SM (10)
FLANGES 2" and above Class 150 Weldneck RF
SM
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, BST, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 150 RF Flanged SM
A216-WCB body, BB, OS&Y, BST, API 600, Trim No. 8
(6)
1½” and under Class 800 Socketweld A105N body, BB, OS&Y, BST, Trim No. 8
(6) GLOBE VALVES
2” and above Class 150 RF Flanged SM
A216-WCB body, BB, OS&Y, BST, Trim No. 8
(6) 1½” and under Class 800 Socketweld A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2” and above Class 150 RF Flanged
SM A216-WCB body, BC, Trim No. 1 (6)
1½” and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe
(6)(7)
2” to 4” Class 150 RF Flanged SM
A216-WCB body, floating ball, RTFE seats, fire s., API 6D, Graphite Packing, Trim N.10
(6)(7) BALL VALVES
6” and above Class 150 RF Flanged SM
A216-WCB body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP
(6)(7)
BUTTERFLY VALVES 26” and above Class 150 RF Flanged
SM A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP (10)
Notes: Notes (1) through (10) of 10.13.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 365 of 403
10.35.4 Line Class: 103CS1XB
Line Class: 103CS1X Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Benzene (≥95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
¾" Sch 160 1" to 2" Sch 80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless A106 Gr. B or API 5L Gr. B PIPE
20” and above calculate Welded API 5L Gr. B
(1) (2) (3)
1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 (4) FITTINGS El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 300 Socketweld RF SM (10)
FLANGES 2" and above Class 300 Weldneck RF
SM
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, BST, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RF Flanged SM
A216-WCB body, BB, OS&Y, BST, API 600, Trim No. 8
(6)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, BST, Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged SM
A216-WCB body, BB, OS&Y, BST, Trim No. 8
(6) 1½" and under Class 800 Socketweld A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2" and above Class 300 RF Flanged
SM A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Graphite Packing, Trim No. 10, fire safe
(6)(7)
2" to 4" Class 300 RF Flanged SM
A216-WCB body, floating ball, RTFE seats, fire s., API 6D, Graphite Packing, Trim N.10
(6)(7) BALL VALVES
6" and above Class 300 RF Flanged SM
A216-WCB body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP
(6)(7)
BUTTERFLY VALVES 26" and above Class 300 RF Flanged
SM A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP (10)
Notes: Notes (1) through (10) of 10.13.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 366 of 403
10.35.5 Line Class: 103CS2XB
Line Class: 103CS2X Basic Material: Carbon Steel Max. Temperature: 425°C Stress Relief: Per Code Service: Benzene (≥95%) Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Per Code
Temperature (°C) (2) -29.0 100 200 300 375 425 Pressure Rating (bar) (2) 51.1 46.6 43.8 39.8 36.4 28.8
Item Size Rating Schedule Type Specification Notes
¾" S-XXS 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless A106 Gr. B or API 5L Gr. B PIPE
20” and above calculate Welded API 5L Gr. B
(1) (2) (3)
1½" and under Class acc. to B16.11 Socketweld A105N, B16.11 (4) FITTINGS El's Tees,
Reducers, Caps, Couplings etc.
2" and above Buttweld A234-Gr. WPB, B16.9 (5)
Nipples and Swages 2" and under Seamless A106 Gr. B or
API 5L Gr. B
Sockolets 1½" and under Class acc. To MSS SP 97 Socketweld A105N MSS SP 97 (4)
Weldolets 2" and above Buttweld A 105N MSS SP 97
1½" and under Class 300 Socketweld RF SM (10)
FLANGES 2" and above Class 300 Weldneck RF
SM
A105N, B16.5 (8)
BOLTING A193 B7 stud bolts, semi-finished, heavy pattern with A194-Gr. 2H heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, BST, API 602, Trim No.8
(6) GATE VALVES
2" and above Class 300 RF Flanged SM
A216-WCB body, BB, OS&Y, BST, API 600, Trim No. 8
(6)
1½" and under Class 800 Socketweld A105N body, BB, OS&Y, BST, Trim No. 8
(6) GLOBE VALVES
2" and above Class 300 RF Flanged SM
A216-WCB body, BB, OS&Y, BST, Trim No. 8
(6) 1½" and under Class 800 Socketweld A105N body, BC, Trim No. 1 (6)
CHECK VALVES 2" and above Class 300 RF Flanged
SM A216-WCB body, BC, Trim No. 1 (6)
1½" and under Class 300 Socketweld with nipples
A105N body, floating ball, RTFE seats, Graphite Packing., Trim No. 10, fire safe
(6)(7)
2" to 4" Class 300 RF Flanged SM
A216-WCB body, floating ball, RTFE seats, fire s., API 6D, Graphite Packing, Trim N.10
(6)(7) BALL VALVES
6" and above Class 300 RF Flanged SM
A216-WCB body, trunnion mounted, fire safe, API 6D, Graphite Packing, Trim ENP
(6)(7)
BUTTERFLY VALVES 26" and above Class 300 RF Flanged
SM A216-WCB body, high performance, fire-safe, API 609 Cat. B, Trim ENP (10)
Notes: Notes (1) through (10) of 10.13.1 are applicable.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 367 of 403
10.36 Category M (Lethal) Line Classes
10.3.1 Line Classes Notes
The following Notes shall apply to all of the carbon steel classes family (101CH1S) and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
(5) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(6) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(7) Flanges
Refer to JERES-L-109 for flange material selection.
(8) Piping material shall be furnished in accordance with the requirements of JERES-A-301.
(9) Minimum line size shall be of 1” for line class with 4.5 and 6.0 mm of corrosion allowance
(10) For this Category M (lethal) service, the following requirements shall be applied to the prescriptions of the line classes here below provided:
a. All block valves shall satisfy the following:
− Tightness class: “A” according to ISO-15848, part I, table 1. Test fluid shall be helium (class AH)
− Endurance class: CO2 (1500 cycles)
− Temperature class: 400°C according to ISO-15848, part I, table 3.
b. Minimize the number of flanges. The surface roughness shall be < 3.2 μm
c. Shop and field welds shall be 100% radiographied. Threaded connections shall be avoided.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 368 of 403
10.36.2 Line Class: 101CH4SM Line Class: 101CH4SM Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29 100 200 260 Pressure Rating (bar) (2) 19.6 17.7 13.8 11.7
Item Size Rating Schedule Type Specification Notes
Up to 2” S-XXS 3” S-160 4” S-120 6” S-80
8” to 10” S-60 12” to 16” S-40
18” S-30
Seamless A106 Gr. B (1) (2)
PIPE
20” and above Calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,
Reducers, Caps, etc.
1” and above Buttweld A234-Gr. WPB, B16.9 (4)
Weldolets 1” and above Buttweld A 105N MSS SP 97
FLANGES 1” and above Class 150 Weldneck RF A 105N MSS SP 97 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10.b)
1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 150 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 150 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 150 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5) 1½” and under Class 150 RF Flanged A105N body, BC, Trim No. 10 (5) CHECK VALVES 2” and above Class 150 RF Flanged A216-WCB body, BC, Trim No. 10 (5) 1½” and under Class 150 RF Flanged A105N body, floating ball, RTFE
seats, Trim No. 10, fire safe (5)(6)
2” to 4” Class 150 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(5)(6) BALL VALVES
6” and above Class 150 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim No. 10
(5)(6)
1½” and under Class 150 RF Flanged A105N body, lubricated, inverted pressure balanced, BC Trim 316
(5) PLUG VALVES
2” and above Class 150 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim 316
(5)
BUTTERFLY VALVES 4” and above Class 150 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B,Trim 316
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 369 of 403
10.36.3 Line Class: 103CH4SM
Line Class: 103CH4SM Basic Material: HIC Resist. C.S. Max. Temperature: 260°C Stress Relief: PWHT Service: Sour, Sour+H2 Code: ASME B31.3 Min. Temperature: -29.0°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 6.0 mm Temperature-Pressure: Per Code Examination: Welds 100%xray
Temperature (°C) (2) -29.0 100 200 260 Pressure Rating (bar) (2) 51.1 46.6 43.8 41.5
Item
Size
Rating Schedule
Type
Specification
Notes
Up to 2” S-XXS 3” S-160 4” S-120
6” to 8” S-80 10” to 18” S-60
Seamless A106 Gr. B (1) (2) PIPE
20” and above calculate Welded A672 Gr. C65 Cl. 42 (3) FITTINGS El’s Tees,
Reducers, Caps, etc.
1” and above Buttweld A234-Gr. WPB, B16.9 (4)
Weldolets 1” and above Buttweld A 105N MSS SP 97
FLANGES 1” and above Class 300 Weldneck RF A 105N MSS SP 97 (7)
BOLTING A193 B7M stud bolts, semi-finished, heavy pattern with A194-Gr. 2HM heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10.b)
1½” and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, API 602, Trim No.12
(5) GATE VALVES
2” and above Class 300 RF Flanged A216-WCB body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½” and under Class 300 RF Flanged A105N body, BB, OS&Y, graphite packing, Trim No. 12
(5) GLOBE VALVES
2” and above Class 300 RF Flanged A216-WCB body, BB, OS&Y, graphite packing, Trim No. 12
(5) 1½” and under Class 300 RF Flanged A105N body, BC, Trim No. 10 (5) CHECK VALVES 2” and above Class 300 RF Flanged A216-WCB body, BC, Trim No. 10 (5)
1½” and under Class 300 RF Flanged A105N body, floating ball, RTFE seats, Trim No. 10, fire safe
(5)(6)
2” to 4” Class 300 RF Flanged A216-WCB body, floating ball, RTFE seats, fire safe, API 6D, Trim No. 10
(5)(6) BALL VALVES
6” and above Class 300 RF Flanged A216-WCB body, trunnion mounted, fire safe, API 6D,Trim No. 10
(5)(6)
1½” and under Class 300 RF Flanged A105N body, lubricated, inverted pressure balanced, BC Trim 316
(5) PLUG VALVES
2” and above Class 300 RF Flanged A216-WCB body, BC lubricated, inverted pressure balanced, API 599, Trim 316
(5)
BUTTERFLY VALVES 4” and above Class 300 RF Flanged A216-WCB body, high performance,
fire-safe, API 609 Cat. B, Trim 316
Notes: Notes (1) through (10) of 10.3.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 370 of 403
10.36.4 Line Class: 101ST0SM
Line Class: 101ST0SM Basic Material: Sour SS 316 Max. Temperature: 538°C Stress Relief: Per Code Service: Sour, Sour + H2 Code: ASME B31.3 Min. Temperature: -40°C Butt-weld Per ASME B16.25 Rating Class: 150 RF B16.5 Corrosion Allowance: 0.0 mm Temperature-Pressure: Per Code Examination: Welds 100%XRay
Temperature (°C) (2) -40 150 250 350 450 538 Pressure Rating (bar) (2) 19.0 14.8 12.1 8.4 4.6 1.4
Item
Size Rating
Schedule
Type
Specification
Notes Up to 2" S-40S
4” to 6” S-10S
Seamless
A312 Gr. TP316L (1)
(2) PIPE
8" and above S-10S as minimum Welded A358 Gr. 316L Cl. 1 (3)
1½" and under
Class acc. to B16.11
Socketweld/ Threaded A182 Gr. F316L, B16.11 (4)
FITTINGS
El's Tees, Reducers, Caps,
Couplings etc. 2" and above Buttweld A403 Gr. WP316L Seamless/Welded, B16.9 (5)
Nipples and Swages 2" and under Seamless A312 Gr. TP316L
Sockolets 1½" and under Class acc. to MSS SP97
Socketweld/ Threaded A182 Gr. F316L, MSS-SP97 (4)
Weldolets 2" and above Buttweld A182 Gr. F316L, MSS-SP97
1½" and under Class 150 Socketweld RF A182 Gr. F316L, B16.5 FLANGES
2" and above Class 150 Weldneck RF A182 Gr. F316L, B16.5 (7) BOLTING A193 B7M stud bolts, heavy pattern with A194 2HM heavy hex nuts. GASKETS 316 SS Metal grooved gasket with flexible graphite layer (10.b)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing, API 602, Trim No. 12
(5)
GATE VALVES
2" and above Class 150 RF Flanged
A351 Gr. CF3M body, Wedge type: BB, OS&Y, graphite packing, API 600, Trim No. 12
(5)
1½" and under Class 800 Socketweld / Threaded
A182 Gr. F316L body, BB, OS&Y, graphite packing,Trim No. 12
(5) GLOBE VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M, BB, OS&Y, graphite packing, Trim No. 12
(5)
1½" and under Class 800 Socketweld/ Threaded
A182 Gr. F316L body, BC, Trim No. 10
(5) CHECK VALVES
2" and above Class 150 RF Flanged A351 Gr. CF3M body, BC, Trim No. 10
(5)
Notes: Notes (1) through (11) of 10.22.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 371 of 403
10.37 Impact Tested Carbon Steel Hydrogen Services Line Classes
10.37.1 Line Classes Notes
The following Notes shall apply to all of the imct tested carbon steel classes family (101CA1H) and shall be considered as an integral part of the individual line class.
Notes:
(1) Corrosion Allowance:
When a small decrease in corrosion allowance would permit the use of the nearest minimum pipe schedule, approval must be obtained from the Company.
(2) For hydrogen service, refer to API-941 for temperature limits of material at applicable hydrogen partial pressure. Service temperatures and material grade limits shall be in accordance with B31.3, Table A-1.
(3) Electric welding process, double-welded, full-penetration straight welds.
(4) Seal Welding
Threaded and socket welded connections are not allowed.
(5) Fittings Thickness
Schedule of fittings and weldneck flanges shall be same as the pipe.
Threaded connections only allowed downstream of vents, drains, hydrotest connections, and instrument take-offs. Threaded O'lets only allowed for thermowell and hydrotest connections.
(6) Valves Non-Metallic Components:
Where non-metallic seats, seals, liners etc. are used, the manufacturer's pressure/temperature ratings shall limit the service of this class. If seal welding is required, threaded end valves shall have extended bodies to prevent damage due to welding heat. Metallic components may be used to overpass the pressure/temperature limits of the non-metallic ones.
(7) Valve Trim
Refer to the applicable JERMS and JERES-L-108 for trim selection.
(8) Flanges
Refer to JERES-L-109 for flange material selection.
Flange connections shall be avoided as possible and replaced with buttwelded connections
(9) Minimum line size shall be of 1” for line classes with 4.5 and 6.0 mm of corrosion allowance.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 372 of 403
10.37.2 Line Class: 103CA1H
Line Class: 103CA1H Basic Material: Low Temperature C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code
Service: Hydrogen Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -45 100 200 232 Pressure Rating (bar) (2) 48.0 45.3 42.5 41.3
Item Size Rating Schedule Type Specification
Notes 1" to 2" Sch 80 3" to 10” S-40 12” to 14” S-STD 16” to 18” S-XS
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A420 Gr. WPL6, B16.9 (5)
Weldolets All Buttweld A350 Gr. LF2 CL. 1, B16.11
FLANGES 1" and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.11 (8)
BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts.
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A352-LCB body, BC, Trim No. 10
(6)
1½" and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A352-LCB body, BC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.37.1 shall apply
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 373 of 403
10.37.3 Line Class: 103CA2H
Line Class: 103CA2H Basic Material: Low Temperature C. S. H2 serv. Max. Temperature: 232°C Stress Relief: Per Code
Service: Hydrogen Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 300 RF B16.5 Corrosion Allowance: 3.0 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -45 100 200 232 Pressure Rating (bar) (2) 48.0 45.3 42.5 41.3
Item Size Rating Schedule Type Specification
Notes 1" to 2" S-160 3" to 4” S-80 6” to 18” S-40
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A420 Gr. WPL6, B16.9 (5)
Weldolets All Buttweld A350 Gr. LF2 CL. 1, B16.11
FLANGES 1" and above Class 300 Weldneck RF A350 Gr. LF2 CL. 1, B16.11 (8)
BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts.
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 300 RF Flanged A352-LCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2" and above Class 300 RF Flanged A352-LCB body, BC, Trim No. 10
(6)
1½" and under Class 300 RF Flanged A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 300 RF Flanged A352-LCB body, BC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.37.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 374 of 403
10.37.4 Line Class: 106CA1H
Line Class: 106CA1H Basic Material: H2 Serv. Low temperature C.S. Max. Temperature: 232°C Stress Relief: Per Code
Service: Hydrogen Code: ASME B31.3 Min. Temperature: -45°C Butt-weld Per ASME B16.25 Rating Class: 600 RF B16.5 Corrosion Allowance: 1.5 mm Temperature-Pressure: Per Code Examination: Welds 100% xray
Temperature (°C) (2) -45 100 200 232 Pressure Rating (bar) (2) 102.1 93.2 87.6 85.2
Item Size Rating Schedule Type Specification
Notes 1" to 2" S-80
3" S-40 4” to 18” S-80
Seamless A333 Gr. 6 or API 5L Gr. B + Impact Test at -45°C
(1) (2) PIPE
20” and above calculate Welded A671 Gr. CC65 Cl. 12 + S2 (3) FITTINGS
El's Tees,
Reducers, Caps, etc.
1" and above Buttweld A420 Gr. WPL6, B16.9 (5)
Weldolets All Buttweld A350 Gr. LF2 CL. 1, B16.11
FLANGES 1" and above Class 600 Weldneck RF A350 Gr. LF2 CL. 1, B16.11 (8)
BOLTING A320 L7 stud bolts, semi-finished, heavy pattern with A194-Gr. 4 heavy hex nuts.
GASKETS Spiral-wound, 316 SS windings, flexible graphite filled with carbon steel outer ring, per B16.20.
1½" and under Class 600 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, API 602, Trim No.12
(6) GATE VALVES
2" and above Class 600 RF Flanged A352-LCB body, BB, OS&Y, graphite packing, Trim No. 12
(6)
1½" and under Class 600 RF Flanged A350 Gr. LF2 CL. 1 body, BB, OS&Y, graphite packing, Trim No. 12
(6) GLOBE VALVES
2" and above Class 600 RF Flanged A352-LCB body, BC, Trim No. 10
(6)
1½" and under Class 600 RF Flanged A350 Gr. LF2 CL. 1 body, BC, Trim No. 10
(6) CHECK VALVES
2" and above Class 600 RF Flanged A352-LCB body, BC, Trim No. 10 (6)
Notes: Notes (1) through (9) of 10.10.1 shall apply.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 375 of 403
Appendix A: Line Class Designator Field Definition Tables
A.1 Flange Face and Pressure Rating
Table A-1: Flange Face and Pressure Rating
Symbol Flange face Type
1 Raised Face 2 Ring Joint Face 3 Flat Face 4 Compact flanges 5 Specialty flange facing
Symbol Nominal Pressure Rating Or Class
(ASME B16.5/B16.47 Flange Class)
01 150 03 300 04 400 06 600 09 900 15 1500 25 2500 (ASME B16.1 Cast Iron Flange Class)
12 125 13 250 (Specific Rating Designations)
80 Non-pressure 85 Pressure Class 75/150 RF 90 Class 3000, API 6A 95 Class 10000, API 6A
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 376 of 403
A.2 Line Material (aa)
Table A-2: Basic Pipe Material Designator
Symbol Material
CA Impact Tested Carbon Steel CS Carbon Steel CG Galvanized Carbon Steel CH HIC Resistant Carbon Steel CJ 1-1/4 Cr-1/2 Mo Alloy Steel CK 2-1/4 Cr-1 Mo Alloy Steel CL 5 Cr-1/2 Mo Alloy Steel CM 9 Cr-1 Mo Alloy Steel BC Copper Tubing BD 90-10 Cu-Ni FE Glass Fiber Reinforced Epoxy LC Cement-lined Carbon Steel LE Epoxy-lined Carbon Steel LP Polypropylene-lined Carbon Steel LR Refractory-lined Carbon Steel LT PTFE-Lined Carbon Steel NC Alloy C276 NM Monel 400 NR Incoloy 800 NS Alloy 825 NT Carpenter 20 (Alloy 20) NY Hastelloy C PD HDPE (High Density Polyethylene) PU CPVC(Chlorinated PVC) PV PVC(PolyVinyl Chloride) SA 304/304L Stain SC Type 304/304L Stainless Steel SD Type 316/316L Stainless Steel SJ 321 Stainless Steel SM 347H Stainless Steel SP 2205 Duplex Stainless Steel SR 304 Stainless Steel SS 304L Stainless Steel ST 316 Stainless Steel SU 316L Stainless Steel SW 310S Stainless Steel
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 377 of 403
A.3 Corrosion Allowance (x)
Table A-3: Corrosion Allowance Designator
Symbol Corrosion Allowance
0 Zero corrosion allowance
1 1.5 mm
2 3.0 mm
3 4.5 mm
4 6.0 mm
9 Corrosion allowance as noted for specific cases
A.4 Service Group Family
Table A-4: Service Group Designator
Symbol Service
A Acid B Boiler External Piping and Joint C Caustic D Amine Service E Catalyst and Slurry F Flare H Hydrogen J External Jacketing Fluid N Ammonium Bisulfide P Process (General Hydrocarbon and other fluids) Q Chlorination Gas (Owner designator)
S Wet H2S Sour Service SM Sour, Sour+H2, Sour + Amine (Lethal) Service T Process high temperature services V Highly Viscous W Water X Toxic, Benzene
XB Benzene (≥ 95% wt)
Y Chlorine Gas (Owner designator)
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 378 of 403
Appendix B: Fliud Idenification Code
Refer to JERES-C-102 for the fliud identification listing.
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 379 of 403
Appendix C: Piping Line Class Summary Table
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
101CA1P
150 RF
Spiral W. SS316 Graphite A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
1.5 SS 316 -45
340
18.4 Process
101CA2P
150 RF
Spiral W. SS316 Graphite A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
3.0 SS 316 -45
340
18.4 Process
103CA1P
300 RF
Spiral W. SS316 Graphite A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
1.5 SS 316 -45
340
48.0 Process
103CA2P
300 RF
Spiral W. SS316 Graphite A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
3.0 SS 316 -45
340
48.0 Process
106CA1P
600 RF
Spiral W. SS316 Graphite A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
3.0 SS 316 -45
340
102.1 Process
101CS1P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
19.6 Process
101CS2P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
19.6 Process
101CS4P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 6.0 13 Cr -29
425
19.6 Process
103CS1P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
51.1 Process
103CS2P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
51.1 Process
103CS4P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 6.0 13 Cr -29
425
51.1 Process
106CS1P
600 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
102.1 Process
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 380 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
106CS2P
600 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
102.1 Process
106CS4P
600 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 6.0 13 Cr -29
425
102.1 Process
209CS1P
900 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
153.2 Process
209CS2P
900 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
153.2 Process
215CS1P
1500 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
255.3 Process
215CS4P
1500 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 6.0 13 Cr -29
425
255.3 Process
225CS1P
2500 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
425.5 Process
225CS4P
2500 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 6.0 13 Cr -29
425
425.5 Process
101CS1P1
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 SS 316 -29
425
19.6 Process
101CS2P1
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
425
19.6 Process
101CS3P1
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 4.5 SS 316 -29
425
19.6 Process
103CS2P1
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
425
51.1 Process
103CS3P1
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 4.5 SS 316 -29
425
51.1 Process
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 381 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
215CS2P1
1500 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
425
255.3 Process
101CH1S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
1.5 SS 316 -29
260
19.6
Sour, Sour +
Hydrogen, Sour + Amine
101CH2S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
3.0 SS 316 -29
260
19.6
Sour, Sour +
Hydrogen, Sour + Amine
101CH3S
150 RF
Spiral W. SS316 Graph. A193 B7M/A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
4.5 SS 316 -29
260
19.6
Sour, Sour +
Hydrogen, Sour + Amine
101CH4S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
6.0 SS 316 -29
260
19.6
Sour, Sour +
Hydrogen, Sour + Amine
103CH1S
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
1.5 SS 316 -29
260
51.1
Sour, Sour +
Hydrogen, Sour + Amine
103CH2S
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
3.0 SS 316 -29
260
51.1
Sour, Sour +
Hydrogen, Sour + Amine
103CH3S
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
4.5 SS 316 -29
260
51.1
Sour, Sour +
Hydrogen, Sour + Amine
103CH4S
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
6.0 SS 316 -29
260
51.1
Sour, Sour +
Hydrogen, Sour + Amine
106CH1S
600 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
1.5 SS 316 -29
260
102.1
Sour, Sour +
Hydrogen, Sour + Amine
106CH2S
600 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
3.0 SS 316 -29
260
102.1
Sour, Sour +
Hydrogen, Sour + Amine
106CH4S
600 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
6.0 SS 316 -29
260
102.1
Sour, Sour +
Hydrogen, Sour + Amine
203CH2S
300 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
3.0 SS 316 -29
260
51.1
Sour, Sour +
Hydrogen, Sour + Amine
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 382 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
206CH3S
600 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
4.5 SS 316 -29
260
102.1
Sour, Sour +
Hydrogen, Sour + Amine
209CH1S
900 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
1.5 SS 316 -29
260
153.2
Sour, Sour +
Hydrogen, Sour + Amine
209CH2S
900 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
3.0 SS 316 -29
260
153.2
Sour, Sour +
Hydrogen, Sour + Amine
209CH3S
900 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
4.5 SS 316 -29
260
153.2
Sour, Sour +
Hydrogen, Sour + Amine
215CH1S
1500 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
1.5 SS 316 -29
260
255.3
Sour, Sour +
Hydrogen, Sour + Amine
215CH2S
1500 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
3.0 SS 316 -29
260
255.3
Sour, Sour +
Hydrogen, Sour + Amine
215CH4S
1500 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
6.0 SS 316 -29
260
255.3
Sour, Sour +
Hydrogen, Sour + Amine
225CH1S
2500 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
1.5 SS 316 -29
260
425.5
Sour, Sour +
Hydrogen, Sour + Amine
101CA2S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Low
Temperature Carbon Steel
3.0 SS 316 -45
260
18.4 Sour, Sour Flare
101CA4S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Low
Temperature Carbon Steel
6.0 SS 316 -45
260
18.4 Sour, Sour Flare
103CA2S
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Low
Temperature Carbon Steel
3.0 SS 316 -45
260
48.0
Sour, Sour +
Hydrogen, Sour + Amine
103CA4S
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Low
Temperature Carbon Steel
6.0 SS 316 -45
260
48.0 Sour, Sour Flare
101CS1D
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 SS 316 -29
120
19.6 Amine
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 383 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
101CS2D
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
120
19.6 Amine
101CS4D
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 6.0 SS 316 -29
120
19.6 Amine
103CS1D
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 SS 316 -29
120
51.1 Amine
103CS2D
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
120
51.1 Amine
106CS2D
600 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
120
102.1 Amine
209CS2D
900 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
120
153.2 Amine
215CS1D
1500 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 SS 316 -29
120
255.3 Amine
215CS2D
1500 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
120
255.3 Amine
101CH1F
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
1.5 SS 316 -29
260
19.6 Sour Flare, Sour + H2 Flare, Sour
+ Amine Flare
101CH2F
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
3.0 SS 316 -29
260
19.6 Sour Flare, Sour + H2 Flare, Sour
+ Amine Flare
101CH4F
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
6.0 SS 316 -29
260
19.6 Sour Flare, Sour + H2 Flare, Sour
+ Amine Flare
103CH2F
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
3.0 SS 316 -29
260
51.1 Sour Flare, Sour + H2 Flare, Sour
+ Amine Flare
101CA1F
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Low
Temperature Carbon Steel
1.5 SS 316 -45
260
18.4 Sour Flare, Sour + H2 Flare, Sour
+ Amine Flare
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 384 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
101CA2F
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Low
Temperature Carbon Steel
3 SS 316 -45
260
18.4 Sour Flare, Sour + H2 Flare, Sour
+ Amine Flare
103CA2F
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Low
Temperature Carbon Steel
3 SS 316 -45
232
48.0 Sour Flare, Sour + H2 Flare, Sour
+ Amine Flare
101CS1B
150 RF
Spiral W. SS316 Graphite SA193 B7 / SA194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
19.6 ASME B31.1
101CS2B
150 RF
Spiral W. SS316 Graphite SA193 B7 / SA194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
19.6 ASME B31.1
103CS2B
300 RF
Spiral W. SS316 Graphite SA193 B7 / SA194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
51.1 ASME B31.1
101CJ1B
150 RF
Spiral W. SS316 Graphite SA193 B16 / SA194 Gr. 4
Carbon Steel 3.0 13 Cr -29
538
19.8 ASME B31.1
401CS1E
150 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 SS 316 -29
425
19.6 Catalyst and Slurry
401CS2E
150 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
425
19.6 Catalyst and Slurry
403CS1E
300 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 SS 316 -29
425
51.1 Catalyst and Slurry
403CS2E
300 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
425
51.1 Catalyst and Slurry
406CS2E
600 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
425
102.1 Catalyst and Slurry
403CJ2E
300 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
1.25 Cr – 0.5 Mo 3.0 SS 316
-29
425 51.7 Catalyst and
Slurry
401CL2E
150 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
5 Cr – 0.5 Mo 3.0 SS 316 -29
538
20.0 Catalyst and Slurry
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 385 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
403CL2E
300 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
5 Cr – 0.5 Mo 3.0 SS 316 -29
590
51.7 Catalyst and Slurry
406CL2E
600 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
5 Cr – 0.5 Mo 3.0 SS 316 -29
590
103.4 Catalyst and Slurry
403SC0E
300 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
304H 0.0 SS 304H -29
538
49.6 Catalyst and Slurry
403SC1E
300 CF
SS Metallic Seal Ring A193 B7 / A194 Gr. 2H
304H 1.5 SS 304H -29
538
49.6 Catalyst and Slurry
101CS1C
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 Monel -29
76
19.6 Caustic
101CS2C
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 Monel -29
76
19.6 Caustic
103CS1C
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 Monel -29
76
51.1 Caustic
103CS2C
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 Monel -29
76
51.1 Caustic
101CA2C
150 RF
Spiral W. SS316 Graphite A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
3.0 Monel -45
76
18.4 Caustic
103CA2C
300 RF
Spiral W. SS316 Graphite A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
3.0 Monel -45
76
48.0 Caustic
101CS2A
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 Alloy 20 -29
200
15.9 Sulfuric Acid
101CS3A
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Carbon Steel 4.5 Alloy 20 -29
200
15.9 Sulfuric Acid
103CS2A
300 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 Alloy 20 -29
200
41.4 Sulfuric Acid
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 386 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
103CS3A
300 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Carbon Steel 4.5 Alloy 20 -29
200
41.4 Sulfuric Acid
101CS1H
150 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
232
19.6 Hydrogen
101CS2H
150 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
232
19.6 Hydrogen
103CS1H
300 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
232
51.1 Hydrogen
103CS2H
300 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
232
51.1 Hydrogen
103CS4H
300 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Carbon Steel 6.0 13 Cr -29
232
51.1 Hydrogen
106CS1H
600 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
232
102.1 Hydrogen
106CS2H
600 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
232
102.1 Hydrogen
206CS1H
600 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr 232
425
102.1 Hydrogen
209CS1H
900 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
153.2 Hydrogen
209CS2H
900 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
153.2 Hydrogen
215CS1H
1500 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
255.3 Hydrogen
103CS3H1
300 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Carbon Steel 4.5 SS 316 -29
232
51.1 Hydrogen
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 387 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
203CS2H1
300 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 232
425
51.1 Hydrogen + H2S (not wet)
206CS3H1
600 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 4.5 SS 316 232
425
102.1 Hydrogen + H2S (not wet)
209CS3H1
900 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 4.5 SS 316 -29
425
153.2 Hydrogen + H2S (not wet)
215CS1H1
1500 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 SS 316 -29
425
255.3 Hydrogen + H2S (not wet)
215CS2H1
1500 RTJ
Soft Iron Octag. Ring A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 SS 316 -29
425
255.3 Hydrogen + H2S (not wet)
101CS1J
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
19.6 External Jacketing
301CG0W
150 FF
Synthetic Fibre A307 B & A193 B7 /
A194 Gr. 2H
Carbon Steel &
Galvanized Carbon Steel
0.0 13 Cr -29
100
10.3 Potable Water
301CG1P
150 FF
Synthetic Fibre A307 B & A193 B7 /
A194 Gr. 2H
Carbon Steel &
Galvanized Carbon Steel
1.5 13 Cr -29
100
10.3 Service Air
301CG2P
150 FF
Synthetic Fibre A307 B & A193 B7 /
A194 Gr. 2H
Carbon Steel &
Galvanized Carbon Steel
3.0 13 Cr -29
100
10.3 Service Air
101CS1X
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
19.6 Toxic, Benzene (<95%)
101CS2X
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
19.6 Toxic, Benzene (<95%)
103CS1X
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
51.1 Toxic, Benzene (95%)
103CS2X
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
51.1 Toxic, Benzene (<95%)
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 388 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
101CS4V
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 6.0 13 Cr -29
425
19.6 Viscous Process Fluid
103CS4V
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 6.0 13 Cr -29
425
51.1 Viscous Process Fluid
103CH2N
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
3.0 SS 316 -29
260
51.1 Ammonium Bisulphide
103CH3N
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
4.5 SS 316 -29
260
51.1 Ammonium Bisulphide
106CH3N
600 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
4.5 SS 316 -29
260
102.1 Ammonium Bisulphide
203CH3N
300 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
4.5 SS 316 -29
260
51.1 Ammonium Bisulphide
215CH3N
1500 RTJ
Soft Iron Octag. Ring A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
4.5 SS 316 -29
260
255.3 Ammonium Bisulphide
101CJ1P
150 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
538 19.8 Process
103CJ2P
300 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 3.0 13 Cr
-29
590 51.7 Process
106CJ1P
600 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
590 103.4 Process
106CJ1P1
600 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 SS 316
-29
590 103.4 Corrosive
Process
106CJ2P
600 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 3.0 13 Cr
-29
590 103.4 Process
106CJ4P
600 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 6.0 13 Cr
-29
590 103.4 Process
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 389 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
209CJ4P
900 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 6.0 13 Cr
-29
590 155.1 Process
103CK1P
300 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 2.25 Cr – 1 Mo 1.5 13 Cr
-29
590 51.7 Process
101CL2P
150 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 5 Cr – 0.5 Mo 3.0 13 Cr
-29
538 20.0 Process
101CL4P
150 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 5 Cr – 0.5 Mo 6.0 13 Cr
-29
538 20.0 Process
103CL1P
300 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 5 Cr – 0.5 Mo 1.5 13 Cr
-29
590 51.7 Process
103CL2P
300 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 5 Cr – 0.5 Mo 3.0 13 Cr
-29
590 51.7 Process
103CL4P
300 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 5 Cr – 0.5 Mo 6.0 13 Cr
-29
590 51.7 Process
225CL2P
2500 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 5 Cr – 0.5 Mo 3.0 13 Cr
-29
590 430.9 Process
225CL2P1
2500 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 5 Cr – 0.5 Mo 3.0 SS 316
-29
590 430.9 Corrosive
Process
101CM2P
150 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 9 Cr – 1 Mo 3.0 13 Cr
-29
538 20.0 Process
101CM3P
150 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 9 Cr – 1 Mo 4.5 13 Cr
-29
538 20.0 Process
101CM4P
150 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 9 Cr – 1 Mo 6.0 13 Cr
-29
538 20.0 Process
103CM2P
300 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 9 Cr – 1 Mo 3.0 13 Cr
-29
590 51.7 Process
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 390 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
103CM3P
300 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 9 Cr – 1 Mo 4.5 13 Cr
-29
590 51.7 Process
103CM4P
300 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 9 Cr – 1 Mo 6.0 13 Cr
-29
590 51.7 Process
106CM2P
600 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 9 Cr – 1 Mo 3.0 13 Cr
-29
590 103.4 Process
106CM3P
600 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 9 Cr – 1 Mo 4.5 13 Cr
-29
590 103.4 Process
201CJ1P
150 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
538 19.8 Process
203CJ1P
300 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
590 51.7 Process
206CJ1P
600 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
590 103.4 Process
101CJ1H
150 RF
Metal Grooved Flex. Graph A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
538 19.8 Hydrogen
103CJ1H
300 RF
Metal Grooved Flex. Graph A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
590 51.7 Hydrogen
103CJ1H1
300 RF
Metal Grooved Flex. Graph A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 SS 316
-29
590 51.7 Hydrogen +
H2S (not wet)
103CJ2H
300 RF
Metal Grooved Flex. Graph A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 3.0 13 Cr
-29
590 51.7 Hydrogen
106CJ1H
600 RF
Metal Grooved Flex. Graph A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
590 103.4 Hydrogen
106CJ2H
600 RF
Metal Grooved Flex. Graph A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 3.0 13 Cr
-29
590 103.4 Hydrogen
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 391 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
106CJ4H
600 RF
Metal Grooved Flex. Graph A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 6.0 13 Cr
-29
590 103.4 Hydrogen
209CJ1H
900 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
590 155.1 Hydrogen
215CJ1H
1500 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
590 258.6 Hydrogen
215CJ1H1
1500 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 SS 316
-29
590 258.6 Hydrogen +
H2S (not wet)
225CJ1H1
2500 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 SS 316
-29
590 430.9 Hydrogen +
H2S (not wet)
103CK1H
300 RF
Metal Grooved Flex. Graph A193 B16 / A194 Gr. 4
Low Alloy 2.25 Cr – 1 Mo 1.5 13 Cr
-29
590 51.7 Hydrogen
225CL2H1
2500 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 5 Cr – 0.5 Mo 3.0 SS 316
-29
590 430.9 Hydrogen +
H2S (not wet)
203CJ1H
300 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
590 51.7 Hydrogen
206CJ1H
600 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5
Mo 1.5 13 Cr
-29
590 103.4 Hydrogen
103CJ1S
300 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5 Mo + JERES-
A-301
1.5 SS 316 -29
590
51.7 Sour, Sour + Hydrogen
106CJ1S
600 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5 Mo + JERES-
A-301
1.5 SS 316 -29
590
103.4 Sour, Sour + Hydrogen
106CJ2S
600 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5 Mo + JERES-
A-301
3.0 SS 316 -29
590
103.4 Sour, Sour + Hydrogen
106CJ4S
600 RF
Spiral W. SS316 Graphite A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5 Mo + JERES-
A-301
6.0 SS 316 -29
590
103.4 Sour, Sour + Hydrogen
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 392 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
209CJ1S
900 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5 Mo + JERES-
A-301
1.5 SS 316 -29
590
155.1 Sour, Sour + Hydrogen
209CJ2S
900 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5 Mo + JERES-
A-301
3.0 SS 316 -29
590
155.1 Sour, Sour + Hydrogen
209CJ4S
900 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5 Mo + JERES-
A-301
6.0 SS 316 -29
590
155.1 Sour, Sour + Hydrogen
215CJ1S
1500 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5 Mo + JERES-
A-301
1.5 SS 316 -29
590
258.6 Sour, Sour + Hydrogen
225CJ1S
2500 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 1.25 Cr – 0.5 Mo + JERES-
A-301
1.5 SS 316 -29
590
430.9 Sour, Sour + Hydrogen
225CL2S
2500 RTJ
5 Cr Octag. Ring A193 B16 / A194 Gr. 4
Low Alloy 5 Cr – 0.5 Mo + JERES-A-
301
3.0 SS 316 -29
590
430.9 Sour, Sour + Hydrogen
103CK1X
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Low Alloy 2.25 Cr – 1 Mo 1.5 13 Cr
-29
590 51.7 Toxic,
Benzene (<95%)
103CK1X
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Low Alloy 2.25 Cr – 1 Mo 1.5 13 Cr
-29
590 51.7 Toxic,
Benzene
101LR1T
150 RF
Spiral W. SS304H Graphite A193 B7 / A194 Gr. 2H
Refract. Lined Carbon Steel 1.5 304H
-29
770 19.6 High
Temperature
103LR1T
300 RF
Spiral W. SS304H Graphite A193 B7 / A194 Gr. 2H
Refract. Lined Carbon Steel 1.5 304H
-29.0
770 51.1 High
Temperature
101SA0P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304/304L 0.0 SS 316
-40
538 19.0 Process
101SA1P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304/304L 1.5 SS 316
-40
538 19.0 Process
103SA0P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304/304L 0.0 SS 316
-40
538 49.6 Process
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 393 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
103SA1P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304/304L 1.5 SS 316
-40
538 49.6 Process
106SA1P
600 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304/304L 1.5 SS 316
-40
538 99.3 Process
209SA1P
900 RTJ
SS 316 Octag. Ring A193 B7 / A194 Gr. 2H
Stainless Steel Type 304/304L 1.5 SS 316
-40
538 148.9 Process
225SA1P
2500 RTJ
SS 316 Octag. Ring A193 B7 / A194 Gr. 2H
Stainless Steel Type 304/304L 1.5 SS 316
-40
538 413.7 Process
101SC0P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304H 0.0 SS 316
-40
538 19.0 Process
101SC1P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304H 1.5 SS 316
-40
538 19.0 Process
103SC0P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304H 0.0 SS 316
-40
538 49.6 Process
103SC1P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304H 1.5 SS 316
-40
538 49.6 Process
106SC1P
600 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304H 1.5 SS 316
-40
538 99.3 Process
101SD0P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 0.0 SS 316
-40
538 19.0 Process
101SD1P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 1.5 SS 316
-40
538 19.0 Process
103SD0P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 0.0 SS 316
-40
538 49.6 Process
103SD1P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 1.5 SS 316
-40
538 49.6 Process
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 394 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
106SD0P
600 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 0.0 SS 316
-40
538 99.3 Process
101SR0P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304 0.0 SS 316
-40
538 19.0
Process , LP Nitrogen, Service Air, Demi Water,
Instrument air
101SR1P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304 1.5 SS 316
-40
538 19.0 Process
103SR0P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304 0.0 SS 316
-40
538 49.6 Process
101SS1P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304L 1.5 SS 316
-40
425 15.9 Process
103SS0P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304L 0.0 SS 316
-40
425 41.4 Process
103SS1P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304L 1.5 SS 316
-40
425 41.4 Process
106SS1P
600 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304L 1.5 SS 316
-40
425 82.7 Process
101SU0P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316L 0.0 SS 316
-40
450 15.9 Process
101SU1P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316L 1.5 SS 316
-40
450 15.9 Process
103SU0P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316L 0.0 SS 316
-40
450 41.4 Process
103SJ1P
300 RF
Spiral W. SS321 Graphite A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 49.6 Process
103SJ2P
300 RF
Spiral W. SS321 Graphite A453 Gr. 660 CL. A
Stainless Steel Type 321 3.0 SS 321 /
SS 347
-29
538 49.6 Process
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 395 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
106SJ1P
600 RF
Spiral W. SS321 Graphite A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 99.3 Process
206SJ1P
600 RTJ
SS 321 Octag. Ring A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 99.3 Process
209SJ1P
900 RTJ
SS 321 Octag. Ring A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 148.9 Process
215SJ1P
1500 RTJ
SS 321 Octag. Ring A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 248.2 Process
103SP1P
300 RF
Spiral W. S32205 Graph. A193 B7 / A194 Gr. 2H
Duplex SS UNS S32205 1.5 UNS
S32205
-40
316 51.7 Process
215SP1P
1500 RTJ
UNS S32205 Octag. Ring A193 B7 / A194 Gr. 2H
Duplex SS UNS S32205 1.5 UNS
S32205
-40
316 258.6 Process
101ST1P
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316 1.5 SS 316
-40
538 19.0 Process
103ST1P
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316 1.5 SS 316
-40
538 49.6 Process
106SU0P
600 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316L 0.0 SS 316
-40
450 82.7 Process
101SC0S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 304H + JERES-A-301
0.0 SS 316 -48
538
19.0 Sour, Sour + Hydrogen
103SC0S
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 304H + JERES-A-301
0.0 SS 316 -48
538
49.6 Sour, Sour + Hydrogen
101SD1S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316/316L
+ JERES-A-301
1.5 SS 316 -48
538
19.0 Sour, Sour + Hydrogen
101ST0S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316 +
JERES-A-301 0.0 SS 316
-48
538 19.0 Sour, Sour +
Hydrogen
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 396 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
101ST1S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316 +
JERES-A-301 1.5 SS 316
-48
538 19.0 Sour, Sour +
Hydrogen
103ST1S
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316 +
JERES-A-301 1.5 SS 316
-48
538 49.6 Sour, Sour +
Hydrogen
101SU0S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316L +
JERES-A-301 0.0 SS 316
-48
450 15.9 Sour, Sour +
Hydrogen
101SU1S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316L +
JERES-A-301 1.5 SS 316
-48
450 15.9 Sour, Sour +
Hydrogen
101SU2S
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316L +
JERES-A-301 3.0 SS 316
-48
450 15.9 Sour, Sour +
Hydrogen
103SU0S
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316L +
JERES-A-301 0.0 SS 316
-48
450 41.4 Sour, Sour +
Hydrogen
106SU1S
600 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316L +
JERES-A-301 1.5 SS 316
-48
450 82.7 Sour, Sour +
Hydrogen
106SU2S
600 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316L +
JERES-A-301 3.0 SS 316
-48
450 82.7 Sour, Sour +
Hydrogen
106SA1S
600 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 304/304L
+ JERES-A-301
1.5 SS 316 -48
538
99.3 Sour, Sour + Hydrogen
209SA1S
900 RTJ
SS 316 Octag. Ring A193 B7M / A194 Gr. 2HM
Stainless Steel Type 304/304L
+ JERES-A-301
1.5 SS 316 -48
538
148.9 Sour, Sour + Hydrogen
225SA1S
2500 RTJ
SS 316 Octag. Ring A193 B7M / A194 Gr. 2HM
Stainless Steel Type 304/304L
+ JERES-A-301
1.5 SS 316 -48
538
413.7 Sour, Sour + Hydrogen
225SJ1S
2500 RTJ
SS 316 Octag. Ring A193 B7M / A194 Gr. 2HM
Stainless Steel 321 + JERES-
A-301 1.5 SS
321/347
-48
538 413.7 Sour, Sour +
Hydrogen
225SJ2S
2500 RTJ
SS 316 Octag. Ring A193 B7M / A194 Gr. 2HM
Stainless Steel 321 + JERES-
A-301 3.0 SS
321/347
-48
538 413.7 Sour, Sour +
Hydrogen
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 397 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
101SD0C
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 0.0 Monel
-40
80 19.0 Caustic
101SS1C
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304L 1.5 Monel
-40
80 15.9 Caustic
101ST1C
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316 1.5 Monel
-40
80 19.0 Caustic
103SD0C
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 0.0 Monel
-40
80 49.6 Caustic
101SR0C
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304 0.0 Monel
-40
80 19.0 Caustic
101ST0A
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Stainless Steel Type 316 0.0 Alloy 20
-40
80 19.0 Sulphuric Acid
101SD0A
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 0.0 Alloy 20
-40
80 19.0 Sulphuric Acid
103SD0A
300 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 0.0 Alloy 20
-40
80 49.6 Sulphuric Acid
101ST1A
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Stainless Steel Type 316 1.5 Alloy 20
-40
80 19.0 Sulphuric Acid
101ST2A
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Stainless Steel Type 316 3.0 Alloy 20
-40
80 19.0 Sulphuric Acid
103ST1A
300 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Stainless Steel Type 316 1.5 Alloy 20
-40
80 49.6 Sulphuric Acid
101SW1A
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Zecor™ + Stainless Steel
Type 310 1.5 Alloy 20
-40
127 19.0 Sulphuric Acid
101SU0H
150 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Stainless Steel Type 316L 0.0 SS 316
-40
450 15.9 Hydrogen
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 398 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
103SD1H
300 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 1.5 SS 316
-40
450 49.6 Hydrogen
103SJ0H
300 RF
Metal Grooved Flex. Graph A453 Gr. 660 CL. A
Stainless Steel Type 321 0.0 SS 321 /
SS 347
-29
538 49.6 Hydrogen
103SJ1H
300 RF
Metal Grooved Flex. Graph A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 49.6 Hydrogen
203SJ1H
300 RTJ
SS 321 Octag. Ring A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 49.6 Hydrogen
106SJ1H
600 RF
Metal Grooved Flex. Graph A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 99.3 Hydrogen
209SJ1H
900 RTJ
SS 321 Octag. Ring A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 148.9 Hydrogen
215SJ1H
1500 RTJ
SS 321 Octag. Ring A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 248.2 Hydrogen
225SJ1H
2500 RTJ
SS 321 Octag. Ring A453 Gr. 660 CL. A
Stainless Steel Type 321 1.5 SS 321 /
SS 347
-29
538 413.7 Hydrogen
225SJ2H
2500 RTJ
SS 321 Octag. Ring A453 Gr. 660 CL. A
Stainless Steel Type 321 3.0 SS 321 /
SS 347
-29
538 413.7 Hydrogen
103SR0H
300 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Stainless Steel Type 304 0.0 SS 316
-40
450 49.6 Hydrogen
106SM0H
600 RF
Metal Grooved Flex. Graph A453 Gr. 660 CL. A
Stainless Steel Type 347H 0.0 SS 347H
-29
538 99.3 Hydrogen
106SU0H
600 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Stainless Steel Type 316L 0.0 SS 316
-40
450 82.7 Hydrogen
209SA1H
900 RTJ
SS 316 Octag. Ring A193 B7 / A194 Gr. 2H
Stainless Steel Type 304/304L 1.5 SS 316
-40
450 148.9 Hydrogen
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 399 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
215SA1H
1500 RTJ
SS 316 Octag. Ring A193 B7 / A194 Gr. 2H
Stainless Steel Type 304/304L 1.5 SS 316
-40
450 248.2 Hydrogen
206SM0H
600 RTJ
SS 321/347 Octag. Ring A453 Gr. 660 CL. A
Stainless Steel Type 347H 0.0 SS 347H
-29
538 99.3 Hydrogen
206SU0H
600 RTJ
SS 316 Octag. Ring A193 B7 / A194 Gr. 2H
Stainless Steel Type 316L 0.0 SS 316
-40
450 82.7 Hydrogen
103SD1X
300 RF
Metal Grooved Flex. Graph A193 B7 / A194 Gr. 2H
Stainless Steel Type 316/316L 1.5 SS 316
-40
538 49.6 Toxic,
Benzene (<95%)
101NC0P
150 RF
Spiral W. N10276 Graphite A193 B7M / A194 Gr. 2HM
Alloy C276 0.0 UNS N10276
-48
500 20.0 Process
101NT1P
150 RF
Spiral W. N08020 Graphite A193 B7 / A194 Gr. 2H
Alloy 20 UNS N08020 1.5 UNS
N08020
-40
325 15.9 Process
103NT1P
300 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Alloy 20 UNS N08020 1.5 UNS
N08020
-40
325 41.4 Process
103NY1P
300 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Alloy C UNS N06003 1.5 UNS
N08020
-40
425 51.7 Process
215NS1P
1500 RTJ
Octagonal Ring N08825 A193 B7 / A194 Gr. 2H
Alloy 825 UNS N08825 1.5 UNS
N08825
-48
538 125.5 Process
225NS1P
2500 RTJ
Octagonal Ring N08825 A193 B7 / A194 Gr. 2H
Alloy 825 UNS N08825 1.5 UNS
N08825
-48
538 208.9 Process
101NT1C
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Alloy 20 UNS N08020 1.5 UNS
N08020
-40
138 15.9 Caustic
103NT1C
300 RF
Flat Gasket PTFE A193 B16 / A194 Gr. 4
Alloy 20 UNS N08020 1.5 UNS
N08020
-40
200 41.4 Caustic
103NY1C
300 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Alloy C UNS N06003 1.5 UNS
N08020
-40
125 51.7 Caustic
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 400 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
101NT9A
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Zecor™ + Alloy 20
UNS N08020 0.8 UNS
N08020
-40
118 15.9 Sulphuric Acid
101NT0A
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Alloy 20 UNS N08020 0.0 UNS
N08020
-40
118 15.9 Sulphuric Acid
101NT1A
150 RF
Flat Gasket PTFE A193 B7 / A194 Gr. 2H
Alloy 20 UNS N08020 1.5 UNS
N08020
-40
118 15.9 Sulphuric Acid
103NT9A
300 RF
Flat Gasket PTFE A193 B16 / A194 Gr. 4
Zecor™ + Alloy 20
UNS N08020 0.8 UNS
N08020
-40
118 41.4 Sulphuric Acid
103NT0A
300 RF
Flat Gasket PTFE A193 B16 / A194 Gr. 4
Alloy 20 UNS N08020 0.0 UNS
N08020
-40
118 41.4 Sulphuric Acid
103NT1A
300 RF
Flat Gasket PTFE A193 B16 / A194 Gr. 4
Alloy 20 UNS N08020 1.5 UNS
N08020
-40
118 41.4 Sulphuric Acid
103SP1N
300 RF
Spiral W. S32205 Graphite A193 B7M / A194 Gr. 2HM
Duplex SS UNS S32205 1.5 UNS
S32205
-48
316 51.7 Ammonium
Bisulphide
215NS1N
1500 RTJ
UNS N08825 Octag. Ring A193 B7M / A194 Gr. 2HM
Alloy 825 UNS N08825 1.5 UNS
N08825
-48
538 258.6 Ammonium
Bisulphide
225NS1N
2500 RTJ
UNS N08825 Octag. Ring A193 B7M / A194 Gr. 2HM
Alloy 825 UNS N08825 1.5 UNS
N08825
-48
538 430.9 Ammonium
Bisulphide
201NR1Q
150 RTJ
Nickel 201 Octag. Ring A193 B16 / A194 Gr. 4
Incoloy 800H 1.5 UNS N08151
-29
510 15.9 Chlorination Gas
203NR1Q
300 RTJ
Nickel 201 Octag. Ring A193 B16 / A194 Gr. 4
Incoloy 800H 1.5 UNS N08151
-29
525 41.4 Chlorination Gas
301BD0W
150 FF
Synthetic Fibre A193 B7 / A194 Gr. 2H
90-10 Cu-Ni 0.0 Bronze 0
100 17.5 Utilities, Fire
Water
101CS2W
150 RF
Spiral W. 316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr 0 100 19.6
Deoiled Water, Effluent Water,
Oily Water, Sanitary Water, Sludge,Treated Water, Water
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 401 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
101CS4W
150 RF
Spiral W. 316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 6.0 13 Cr 0 100 19.6 WWT, Brine
101SR0W
150 RF
Spiral W. 316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304 0.0 SS 316
-40
538 19.0 Potable Water
Treated Water
103SR0W
300 RF
Spiral W. 316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304 0.0 SS 316
-40
538 19.0 Treated Water
106SR0W
600 RF
Spiral W. 316 Graphite A193 B7 / A194 Gr. 2H
Stainless Steel Type 304 0.0 SS 316
-40
538 19.0 Treated Water
301FE0P
150 FF
Full Face Elastomeric A307 A or B / A563 Gr. A
Reinforced Thermosetting
Resin 0.0 AL-BR
0
100 17.5
Sea Water, Saline Cooling Water, Neutr.
Water, Cooling Water
301FE0W
150 FF
Full Face Elastomeric A307 A or B / A563 Gr. A
Reinforced Thermosetting
Resin 0.0
Bronze or Monel or AL-BR
0 100 17.5
Oily Water, Water, Sludge, Slop, Sanitary Water, Treated
Water, Fire Water, Service Water, Deoiled Water, Effluent
Water, Soft Cooling Water,
Auxiliary Cooling Water
301FE0A
150 FF
Full Face Butyl Rubber A307 A or B / A563 Gr. A
Reinforced Thermosetting
Resin 0.0 Teflon
Lined
0
102 4.0 Weak Sulphuric
Acid
301PU0A
150 FF
Full Face Butyl Rubber A307 A or B / A563 Gr. A
CPVC 0.0 SS 316 4
82 ATM Weak sulfuric
acid 2% - 30%
301PU0P
150 FF
Full Face Elastomeric A307 A or B / A563 Gr. A
CPVC 0.0 Bronze / AL-BR
4
80 8.0 Calcium Hypocl.
Solution
301PU0W
150 FF
Full Face Elastomeric A307 A or B / A563 Gr. A
CPVC 0.0 Bronze / AL-BR
4
80 8.0 Potable Water
501PD0P
150 FM
Full Face Neoprene A307 A or B / A563 Gr. A
HDPE 0.0 Bronze 4
80 10 Chemical
Product
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 402 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
301PV0W
150 FF
Full Face Elastomeric A307 A or B / A563 Gr. A
PVC 0.0 Bronze
or Monel or AL-BR
4
50 16 Underground,
Sanitary
301LC0W
150 FF
Synthetic Fibre A307 A or B / A563 Gr. A
Cement Lined Carbon Steel 0.0 Bronze
-29
343 17.2
Oily Water, Water, Sludge, Service Water
301LE0W
150 FF
Synthetic Fibre A307 B & A193 B7 /
A194 Gr. 2H
FBE Lined Carbon Steel 0.0 Bronze
0
90 17.2 Waste Water
301LT0P
150 FF
TFE Elastom. Filler, 3mm A193 B7 / A194 Gr. 2H
PTFE Lined Carbon Steel 0.0 PTFE
0
93
Manuf. Std. Spent Caustic
101LT0A
150 RF
Gylon 3540 ring type A193 B7 / A194 Gr. 2H
Teflon Lined Carbon Steel 0.0 PTFE
-29
160 10.3 Sulfuric Acid
101LP0A
150 RF
Gylon 3540 ring type A193 B7 / A194 Gr. 2H
Polypropylene Lined Carbon
Steel 0.0 Alloy 20
-29
200 10.3 Sulfuric Acid
101LP0P
150 RF
Gylon 3540 ring type A193 B7 / A194 Gr. 2H
Polypropylene Lined Carbon
Steel 0.0 EPDM
-29
107
Manuf. Std.
Neutralized Water
101CS1XB
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
19.6 Benzene (≥95%)
101CS2XB
150 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
19.6 Benzene (≥95%)
103CS1XB
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 1.5 13 Cr -29
425
51.1 Benzene (≥95%)
103CS2XB
300 RF
Spiral W. SS316 Graphite A193 B7 / A194 Gr. 2H
Carbon Steel 3.0 13 Cr -29
425
51.1 Benzene (≥95%)
101CH4SM
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
6.0 SS 316 -29
260
19.6
Sour, Sour +
Hydrogen, Sour + Amine
103CH4SM
300 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
HIC Resistant Carbon Steel + JERES-A-301
6.0 SS 316 -29
260
51.1
Sour, Sour +
Hydrogen, Sour + Amine
Jubail Export Refinery Engineering Standard
JERES-L-105 Rev.5 Piping Line Class and Material Specifications 20 May 2009
This document is the property of Jubail Export Refinery and no parts of this document shall be reproduced by
any means without prior approval by the Company.
Page 403 of 403
PIPING CLASS
RATING FACING GASKET BOLTING
BASE MATERIAL
C.A. [mm]
VALVE TRIM
TEMP [°C]
Min & Max
PRESS [barg] Max
SERVICE NOTE
101ST0SM
150 RF
Spiral W. SS316 Graphite A193 B7M / A194 Gr. 2HM
Stainless Steel Type 316 +
JERES-A-301 0.0 SS 316
-48
538 19.0 Sour, Sour +
Hydrogen
103CA1H
300 RF
Metal Grooved Flex. Graph A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
1.5 SS 316 -45
232
48.0 Hydrogen
103CA2H
300 RF
Metal Grooved Flex. Graph A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
3 SS 316 -45
232
48.0 Hydrogen
106CA1H
600 RF
Metal Grooved Flex. Graph A320 L7 / A194 Gr. 4
Low Temperature Carbon Steel
1.5 SS 316 -45
232
102.1 Hydrogen
Top Related