integrated communication solution – copper
AFC Group’s range of integrated communication
products includes the innovative and patented SMP
Data Communications’ copper cabling solution. An
industry pioneer in copper cabling technology, and now
part of Optical Cable Corporation (OCC), SMP products
are the optimum choice to complement an AFC fibre
network. AFC’s total communications cabling solution
encompasses a full portfolio of fibre optic products,
copper closet, workstation and copper cabling.
integrated communication solution – copper
contents:
cc Copper Closet
Ws Workstation
cu Copper UTP Cable
c o p p e r c l o s e t
SMP Data Communications’ Copper Closet connectivity
solutions offer customers engineering excellence and design
innovation. From patented circuit board technology to 100%
component erformance-tested patch cords, SMP continuously
strives to produce quality connectivity components that offer
reliability and value. This dedication to manufacturing
produces components that exceedingly surpass industry
standards and customer expectations.
contents:cc-2 Limited Axcess
Solution
cc-5 Category 6a Solutions
cc-8 Patch Panels
cc-14 Zone Distribution Solutions
cc-17 Cable Assemblies & Patch Cords
cc-20 110 Blocks
c o p p e r c l o s e t
limited axcess™
Keyed Copper Network Solutions
In part because of the research and development associated with developing a guaranteed 10 Gig system, SMP was able to generate a whole new product line for securing and segmenting network access while continuing to offer superior performance. The patented Limited Axcess™ RJ45 product line offers enhanced network security by providing physically restrictive access to the network using a unique plug and jack interconnect system.
Additionally, SMP’s signature Bezel system and Patch Cord boot combination create multiple levels of keyed access to the network. This break through technology provides enhanced system performance exceeding TIA Category 6a component requirements. Whether your concern is HIPAA, Sarbanes Oxley, Security Clearance or just controlled access to your network, SMP Data Communication’s Limited Axcess™ product line will provide physical control of user access for the network administrator and bandwidth above any copper system available.
• Limited Axcess™ jacks exceed Category 6a component performance requirements
• Two layers of enhanced security may be deployed independently, as either the proprietary plugs and jacks or keyed bezels.
• Prohibits unauthorized access.
• Available in 8 different colored keyed bezel and boot combinations.
• Conversion patch cords are available to connect standard Ethernet hardware to the Limited Axcess™ network.
• UL listed communications circuit accessory.
• Compliant with Power over Ethernet (PoE) requirements
• Contact material - high strength beryllium copper alloy Contact plating - 50 µin gold over nickel
AppliCAtioNS
• 10GBASE-TEthernet
• 1000BASE-TGigabitEthernet
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• Voice
• BroadbandVideo
• Allotherapplicationsdevelopedfor operation over class E cabling
copper closet cc-2
limited axcess™ patch cords catalog number
LAPC6A - m - - xx YY
cable type plug one plug two plug two Boot length in Feet denotes Boot color
sShielded
KKeyed Boot
mKeyed Plug
KKeyed Boot
See Color Code Chart
uUnshielded
BNon-keyed Boot
a568A Wired
BNon-keyed Boot
B568B Wired
sSlimline Boot
nNo Boot
limited axcess™
limited Axcess™ Jacks
SMP’s patented Limited Axcess™ jacks are the initial component when creating a Limited Axcess secure network. These unique jacks offer an innovative security layer for establishing a physically restrictive network system through keyed configurations and locking keyed bezels. Deployed with the keyed strain relief and plugs found on the Limited Axcess patch cords, the entire system can easily segregate any network segment for physical security. In addition to the security aspect of the Limited Axcess jacks, these RJ45 components exceed TIA Category 6a component performance requirements with a dramatic increase in primary parameter performance.
• Bezels may be applied after installation to lock jacks in place
• Compliant with Power over Ethernet (PoE) requirements
• Contact material high strength beryllium copper alloy; Contact plating – 50 µm gold over nickel
• Available in 8 different colored keyed bezel combinations
• Shielded keystone version available as well – call factory for details
limited Axcess™ patch Cords
The Limited Axcess™ patch cord, with its patented plug technology, is a key component to creating a secure Limited Axcess system. This one-of-a-kind patch cord uses a keyed plug and a unique locking boot to provide two layers of physically restrictive network security. Both these layers of enhanced security may be deployed independently as either the proprietary plugs with corresponding jacks or the keyed
bezels with matching locking boots. In addition, performance exceeds TIA Category 6a component requirements.
• Locking boot applied during manufacturing
• Conversion patch cords available to connect standard Ethernet hardware to the Limited Axcess system
• Available in 8 different colored keyed boot combinations
• Cable color is gray
Ex: lapc6as-mK-as0309 = Limited Axcess™ Shielded Patch Cord, Keyed plug and boot on one side and A wired with Slimline boot on other side, 3 feet, yellow
limited axcess™ Jacks
catalog number description
LA6Axx Limited Axcess™ Cat 6a RJ45 jack with keyed bezel
* Replace “xx” with color code – see color code chart
limited axcess™ color code chart
code color code color
02 Black 06 Gray03 Red 07 White04 Green 08 Orange05 Blue 09 Yellow
copper closet cc-3
limited axcess™
limited Axcess™ Secure Faceplates
To create truly limiting admission to secure networks, SMP went one step further in developing the Limited Axcess™ product line and created faceplates that offer an added layer of defense for segregating specific networks. The SMP Secure faceplate is double layered with the outer stainless steel faceplate acting as a locking mechanism, securing the bezels onto the jack and preventing access for removal.
• Stainless steel construction for corrosion resistance
• Tamper proof screws included
• Minimum ordering quantities may apply
limited Axcess™ patch panels
From the outlet to the equipment room, SMP’s new keyed copper solution offers physically restrictive access to assist in network segregation. For the communications closet, the Limited Axcess™ system allows network administrators to easily control user connectivity to specific network segments. By using SMP’s 24 port snap-in patch panel and Limited Axcess™ RJ45 jacks, network permissions can be effortlessly managed.
Furthermore, Limited Axcess’™ patented technology provides enhanced system performance exceeding Category 6a requirements. This one-of-a-kind system is ideal for applications where restrictive network security is required or for end users looking for superior bandwidth performance.
• 24 port snap in panel
• Limited Axcess™ and color options on page CC-3
limited axcess™ secure Faceplates
catalog number description
LAFP01SS Limited Axcess™ Stainless Steel Secure Faceplate Kit, 1 port
LAFP02SS Limited Axcess™ Stainless Steel Secure Faceplate Kit, 2 port
limited axcess™ patch panels
catalog number description
A24 Limited Axcess™ Snap-In Patch Panel, 24 Port, 2 RU (Jacks not included)
copper closet cc-4
categorY 6a solution
category 6a solutionFor 10 GBASE-t Applications
AppliCAtioNS• 10GBASE-T Ethernet
• 1000BASE-T Gigabit Ethernet
• 100BASE-TXFastEthernet
• 10BASE-T Ethernet
• BroadbandVideo
• 155/622 Mbps ATM
• 100 Mbps TP-PMD
• 4/16 Mbps Token Ring
• Voice
With the number of new 10 Gigabit structured cabling solutions flooding the market, SMP has developed a system that sets the standard for this next generation of technology. SMP created components that are not only guaranteed to surpass the IEEE throughput standards but exceed the elevated frequency response requirements of TIA. This deliberate and methodical approach to component design has led SMP to create superior 10 Gigabit shielded and un-shielded systems. Within these system solutions, SMP has kept one thing constant and that is our commitment to quality. Whether choosing a UTP or FTP 6a solution, customers can be assured that they are getting a connection to count on.
SMP's 10 Gig solution reaches beyond the current Category 6 specifications and creates a system that offers enhanced performance and guaranteed 6a connectivity. As a system, the SMP UTP or FTP 6a solution offers superior alien cross-talk performance that exceeds ISO Class E, Augmented Cat 6 and IEEE 10 GBASE-T requirements for a full 100 meters.
• Guaranteed 10 GBASE-T link segment performance compliant
• 10 GBASE-T 100m Solution
• Backward compatibility (Cat 6, Cat 5e, and Cat 3 compliant)
• Fully inter-operable with other standards based components and systems
• Power over Ethernet (PoE) compliant
• Twice the bandwidth of Category 6 cabling
copper closet cc-5
categorY 6a solution
Category 6a patch Cords
To complete the link, SMP created Category 6a station cords that guarantee 6a compliance and offer superior PSANEXTperformancesuitableformitigationofaliencross-talk. These station cords also improve the external noise immunity of structured communications cabling systems and EMI suppression through shielded cabling and plug design. Overall, SMP’s Cat 6a patch cords assist in creating a complete 10 Gigabit throughput system that is reliable for years to come.
• Guaranteed Augmented Category 6 compliant
• Backward compatible with Category 3, 5, 5e and 6
• SuperiorPSANEXTperformancesuitableformitigation of alien cross-talk in existing installs
• Superior PSAACR-F performance
• Superior EMI suppression
• Improves the external noise immunity of structured cabling systems
• LS0HorPVC cable construction
• PVCpatchcord is UL Listed
Category 6a outlet Jacks
SMP’s Augmented Category 6 jack offers a high performance interconnect hardware component in a compact form factor. This RJ45 Slim-line Category 6a jack provides a comprehensive solution for high
performance structured cabling systems. Using patented crosstalk reduction technology and multiple printed circuit boards, SMP engineering has developed its highest performing component product yet. In addition to the performance levels, the small sized form factor of the Slim-line design supports high density applications allowing for 24 ports in a 1U panel for shielded applications.
• Guaranteed Augmented Category 6 compliant
• Slim-line profile allows 24 ports in a 1U panel.
• IEEE - 10GBASE-T 802.3an clause 55.7 (compliant to link definition)
• TIA - TSB-155 (Channel compliant) & 568b.2-10 (Component compliant)
• ISO - TR-24750 (Channel compliant)
• Versatileformfactorallowsimplementationin most vendor faceplates.
• New high performance contacts provide low crosstalk with improved mechanical robustness.
• Single stuffer cap.
• Terma-grip technology for easy field installation.
• Minimized shielding aperture size for reduced EMI emissions.
• 2 PCB Mezzanine assemblies for low crosstalk performance in a small form factor.
• Improved strain relief system designed for Category 6a cable.
• UL listed communications circuit accessory.
• Large easy-to-read color code labels.
• Compliant with Power over Ethernet (PoE) requirements.
• Contact material - high strength beryllium copper alloy
• Contact plating - 50 µin gold over nickel
smp category 6a patch cords
catalog number description
PC6AS-B-xxyy* Category 6a patch cord with boot
* Replace “xx” with length in feet; replace “yy” with color choice -06=Data Gray (Standard)** UL Listed CCA File E137579Ex: PC6AS-B-0306 = Category 6a patch cord with boot, 3 feet,Gray (Standard)
smp category 6a outlet Jacks
catalog number description
U6Axx Category 6a UMJ outlet jack, UTP - Unshielded
K6Axx Category 6a KMJ outlet jack, UTP - Unshielded, Slim-line
K6A02S Category 6a KMJ outlet jack, FTP - Shielded, Slim-line
* Replace “xx” with color code – see color code chart in Workstation section – KMJ Jacks & Adapters
copper closet cc-6
categorY 6a solution
Category 6a patch panels
SMP Data Communications’ Category 6a Patch Panels offer a high density solution for guaranteed 10GBASE-T Ethernet applications. Both SMP’s UTP and FTP Cat 6a patch panels present a product solution that exceeds proposed 10Gbit standards by TIA/EIA and promises superior performance compliance. As a 10 Gig compo-nent, the Category 6a patch panel is ideal for end users who are looking for superior network performance to keep their infrastructure lasting well into the future.
• Guaranteed Augmented Category 6 compliant
• Backward compatible to Category 3, 5, 5e, and 6
• Offers mounting flexibility and removable cable strain-relief bar that attaches directly to panel
• All steel construction ensures panel rigidity and reliable terminations
• Can be easily mounted to any 19” rack or cabinet
• High density configuration allows for 24 ports in a 1U rack space
• Write on window plates for port identification
• TIA-TSB 155 & 568B.2-10 component compliant
• ISO 24750 compliant
• IEEE 802.3an 10GBASE-T link segment (Clause 55.7) compliant – when installed with approved cable and patch cords
• CSA certified
• Insulation resistance – 500 MΩ minimum
• Dielectricwithstand–1000VACRMS,AC60Hz or1414VDCP-P
• DC current rating – 1.5 A per conductor at 20° C ambient de-rated to 0.75 A at 60° C ambient
smp category 6a patch panels
catalog number description
AAXG6A16-UTP Category 6a 10 Gig UTP Patch Panel, UMJ style, 1 RU, 16 port
AAXG6A24-UTP Category 6a 10 Gig UTP Patch Panel, UMJ style, 2 RU, 24 port
AAXG6A32-UTP Category 6a 10 Gig UTP Patch Panel, UMJ style, 2 RU, 32 port
AAXG6A48-UTP Category 6a 10 Gig UTP Patch Panel, UMJ style, 4 RU, 48 port
AKXG6A16-UTP Category 6a 10 Gig UTP Patch Panel, KMJ style, 1 RU, 16 port
AKXG6A16-FTP Category 6a 10 Gig FTP Patch Panel, Shielded KMJ style, 1 RU, 16 port
AKXG6A24-FTP Category 6a 10 Gig FTP High Density Patch Panel, Shielded KMJ style, 1 RU, 24 Port
AKXG6A32-FTP Category 6a 10 Gig FTP Patch Panel, Shielded KMJ style, 2 RU, 32 Port
AKXG6A48-FTP Category 6a 10 Gig FTP Patch Panel, Shielded KMJ style, 2 RU, 48 Port
copper closet cc-7
patch panels
patch panelsCategory 6
When Category 6 was introduced to the market, SMP brought a product offering that was designed to exceed industry expectations and surpass the governing standards. SMP created Category 6 connectivity components that offered patented technology and guaranteed bandwidth performance. SMP’s Category 6 patch panels were no exception. Developed to offer true performance, SMP’s Category 6 patch panels are assured to meet the standard when verified.
• Category 6 component compliant
• 610 punch down block
• ETLVerifiedtoTIA/EIA568-B.2-1Cat6
• Power-Safe modular jack contacts
• SMP patented PCB technology
• Backward compatible, Cat 3, 5, & 5e
• Mounting flexibility
• Removable cable strain-relief bar attaches directly to Panel
• All steel panel (no plastic frames) ensures panel rigidity and reliable terminations
• IKON compatible - 12 colors
• Universal T568A/B wiring for easy installation
• 6 Port component modules
• Write-on label fields
• Rigid Box-Section panel construction
• Long term application confidence
• Compliant with power over Ethernet requirement
• All components made in the U.S.
applications• TIA/EIA 854 Gigabit
Ethernet over Cat 6 Cabling
• 1000BASE-T Gigabit Ethernet
• 100BASE-TXFastEthernet
• 10BASE-T Ethernet
• BroadbandVideo
• 270 Mbps digital video
• 155/622 Mbps ATM
• 100 Mbps TP-PMD
• 100VG-AnyLan
• 4 / 16 Mbps Token Ring
• Voice
axcess 6™ patch panels
catalog number description
PP12SIX Wall Mount Patch Panel, 568A/B wired, 12 port, 89D Bracket
PP1288/110A6 Wall Mount Patch Panel, 568A/B wired, 12 port
PP2488/110A6 Wall Mount Patch Panel, 568A/B wired, 24 port
DCC1288/110SIX Rack Mount Patch Panel, 568A/B wired, 12 port, 1 RU
DCC1688/110SIX Rack Mount Patch Panel, 568A/B wired, 16 port, 1 RU
DCC2488/110SIX Rack Mount Patch Panel, 568A/B wired, 24 port, 1 RU
DCC3288/110SIX Rack Mount Patch Panel, 568A/B wired, 32 port, 2 RU
DCC4888/110SIX Rack Mount Patch Panel, 568A/B wired, 48 port, 2 RU
DCC6488/110SIX Rack Mount Patch Panel, 568A/B wired, 64 port, 4 RU
DCC9688/110SIX Rack Mount Patch Panel, 568A/B wired, 96 port, 4 RU
DCC12088/110SIX Rack Mount Patch Panel, 568A/B wired, 120 port, 5 RU
DCC1688/110SIX-S Rack Mount Patch Panel, 16 Port, KMJ Shielded Jacks, 1 RU
DCC2488/110SIX-S Rack Mount Patch Panel, 24 Port, KMJ Shielded Jacks, 2 RU
DCC3288/110SIX-S Rack Mount Patch Panel, 32 Port, KMJ Shielded Jacks, 2 RU
DCC4888/110SIX-S Rack Mount Patch Panel, 48 Port, KMJ Shielded Jacks, 2 RU
ACC2488/110SIX Rack Mount Patch Panel, Angled, 568A/B wired, 24 port, 1 RU
ACC4888/110SIX Rack Mount Patch Panel, Angled, 568A/B wired, 48 port, 2 RU
copper closet cc-8
patch panels
Category 5e -110 Style
SMP’s Category 5e patch panels incorporate SMP’s best design and application performance specifications ever. The A5E™ product line provides unmatched performance in premise connectivity. Designed for the most demanding network applications, SMP created Category 5e patch panels that offer customers the highest level of headroom to any Category 5e link or channel.
• Comfortably exceeds EIA/TIA 568-B.2 Category 5e standards
• ISO/IEC11801 compliant
• Patented PC Board Technology
• Constructed of cold rolled steel for durability
• Rigid design provides solid frame for hi-impact punching tools
• Universal TIA 568A/B wiring configuration
• IDC’s withstand 200 wire insertions
• Write on label fields
• IKON compatible – 12 colors
• Cable strain relief bar provided
• All components made in U.S.
applications
• 1000BASE-TGigabitEthernet
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• Broadbandvideo
• 270Mbpsdigitalvideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 100VGAnyLan
• 4/16MbpsTokenRing
• Voice
a5e™ patch panels
catalog number description
PP12A5E Wall Mount Patch Panel, 568A/B wired, 12 port, with 89D bracket
PP1288/110A5E Wall Mount Patch Panel, 568A/B wired, 12 port
PP2488/110A5E Wall Mount Patch Panel, 568A/B wired, 24 port
DCC1288/110A5E Rack Mount Patch Panel, 568A/B wired, 12 port, 1 RU
DCC1688/110A5E Rack Mount Patch Panel, 568A/B wired, 16 port, 1 RU
DCC2488/110A5E Rack Mount Patch Panel, 568A/B wired, 24 port, 1 RU
DCC3288/110A5E Rack Mount Patch Panel, 568A/B wired, 32 port, 2 RU
DCC4888/110A5E Rack Mount Patch Panel, 568A/B wired, 48 port, 2 RU
DCC6488/110A5E Rack Mount Patch Panel, 568A/B wired, 64 port, 4 RU
DCC9688/110A5E Rack Mount Patch Panel, 568A/B wired, 96 port, 4 RU
DCC12088/110A5E Rack Mount Patch Panel, 568A/B wired, 120 port, 5 RU
ACC2488/110A5E Rack Mount Patch Panel, Angled,568A/B wired, 24 port, 1 RU
ACC4888/110A5E Rack Mount Patch Panel, Angled,568A/B wired, 48 port, 2 RU
copper closet cc-9
patch panels
Category 5e - Shielded 110 Style
SMP’s shielded Category 5e patch panels provide superior performance with an extra sense of security. A removable cover protects against external noise and wireless technologies while also offering easy access for termination. Just like all A5E™ patch panels by SMP, performance is designed to exceed EIA/TIA 568-B.2 Category 5e standards.
• Comfortably exceeds EIA/TIA 568-B.2 Category 5e standards
• ISO/IEC11801 compliant
• Fully shielded RJ45 jacks
• Patented PC Board Technology
• Rigid design provides solid frame for hi-impact punching tools
• 110 Style punch down for easy terminations
• IDC’s withstand 200 wire insertions
• Write on label fields
• IKON compatible – 12 colors
• Removable cable strain-relief bar attaches directly to Panel
• Removable cover for protection from EMI and RFI emissions
• All components made in U.S.
Voice Grade telco
The same cross-connect solutions available for Ethernet applicationsarealsoavailableforPBXequipment.Fortheseapplications,SMPoffersVoiceGradeTelcoPatchPanels which break out to 24-RJ45 jacks. Customers can easily patch their phone system into the permanent link by simply using patch cords and open ended cable assemblies punched down to a 110 block, 66-block, or 110 patch panel.
• Patented PC Board Technology
• Constructed of extruded aircraft grade aluminum
• 25 Pair Telco connectors allow for quick connects and easy installations
• Write on label fields
• IKON compatible – 12 colors
• All components made in U.S.
applications
• 1000BASE-T Gigabit Ethernet
• 100BASE-TX Fast Ethernet
• 10BASE-TEthernet
• Broadbandvideo
• 270Mbpsdigitalvideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 100VGAnyLan
• 4/16Mbps Token Ring
• Voice
a5e™ shielded patch panels
catalog number description
DCC1688/110S01 Rack Mount Patch Panel, Shielded 110-style, 568B wired, 8 port modules, 16 port, 1 RU
DCC1688/110S03 Rack Mount Patch Panel, Shielded 110-style, 568A wired, 8 port modules, 16 port, 1 RU
DCC2488/110SAB Rack Mount Patch Panel, Shielded, 110 style, 568A/B wired, 8 port modules, 24 Port, 1 RU
DCC2488/110S6-01 Rack Mount Patch Panel, Shielded 110-style, 568B wired, 6 port modules, 24 port, 1 RU
Voice grade telco patch panels
catalog number description
DCC2462/2502 Rack Mount Patch Panel, Telco Interface panel, 6x2, USOC, 24 Port
DCC2464/2502 Rack Mount Patch Panel, Telco Interface panel, 6x4, USOC, 24 Port
DCC2482/2502 Rack Mount Patch Panel, Telco Interface panel, 8x2, USOC, 24 Port
copper closet cc-10
patch panels
Gigabit Ethernet telco
High speed data connections are essential for keeping pace with today’s business climate. SMP took this into consideration when developing patch panels that offered 1000BASE-T Gigabit Ethernet performance. Not only does the performance exceed industry standards, SMP’s Gigabit Ethernet Patch Panels are 100% component tested in the factory guaranteeing the customer worry-free installations.
• ExceedsEIA/TIA568-B.2specifications
• ISO/IEC11801compliant
• PatentedPCBoardTechnology
• Allsteelconstructionfordurability
• Allplasticcomponentsarehighimpact self-extinguishing,rated94V-0
• EachfemaleTelcoconnectorissplitoutto6 RJ45 ports wired for 1000BASE-T applications
• Fastandeasyinstallations
• Writeonlabelfields
• IKONcompatible–12colors
• Fullyadjustablecablemanagementsupportbar and bend radius requirements
• AllcomponentsmadeinU.S.
applications
• 1000BASE-TGigabitEthernet
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• Broadbandvideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 100VGAnyLAN
• 4/16MbpsTokenRing
• Voice
gigabit ethernet patch panels
catalog number description
PP1288/25V03 Wall Mount Patch Panel, Gigabit Telco, 568A wired, 12 Port
PP1288/25V01 Wall Mount Patch Panel, Gigabit Telco, 568B wired, 12 Port
PP2488/25V03 Wall Mount Patch Panel, Gigabit Telco, 568A wired, 24 Port
PP2488/25V01 Wall Mount Patch Panel, Gigabit Telco, 568B wired, 24 Port
DCC24A/GBASET21 Rack Mount Patch Panel, Gigabit Telco, 568A wired, 24 Port with cover
DCC24B/GBASET21 Rack Mount Patch Panel, Gigabit Telco, 568B wired, 24 Port with cover
DCC48A/GBASET21 Rack Mount Patch Panel, Gigabit Telco, 568A wired, 48 Port with cover
DCC48B/GBASET21 Rack Mount Patch Panel, Gigabit Telco, 568B wired, 48 Port with cover
DCC2488/25S-01 Rack Mount Patch Panel, Shielded Gigabit Telco, 568B wired, 24 Port with cover
ACC2488/25V01 Rack Mount Patch Panel, Angled,Gigabit Telco, 568B wired, 24 port, 1 RU
ACC4888/25V01 Rack Mount Patch Panel, Angled,Gigabit Telco, 568B wired, 48 port, 2 RU
copper closet cc-11
patch panels
Fast Ethernet telco
SMP was one of the first developers of Category 5e compliant 100BASE-T Patch Panels that support advanced high-density Telco ports. Each female 25-pair Telco connector is split out to 12-RJ45 ports wired for 100BASE-T applications for fast and easy installations. Developed initially for use with Cisco switches, SMP’s Fast Ethernet Telco patch panels offer customers a single source solution that guarantees unrivaled 100BASE-T performance.
• ExceedsEIA/TIA568-B.2specifications
• ISO/IEC11801compliant
• PatentedPCBoardTechnology
• Allsteelconstructionfordurability
• Allplasticcomponentsarehighimpact self-extinguishing,rated94V-0
• EachfemaleTelcoconnectorissplitoutto 12RJ45portswiredfor100BASE-TXapplications
• Fastandeasyinstallations
• Writeonlabelfields
• IKONcompatible–12colors
• Removablecablestrain-reliefbarattaches directly to Panel
• Alsoavailableinshieldedversion
• AllcomponentsmadeinU.S.
applications
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• Broadbandvideo
• 270Mbpsdigitalvideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 100VGAnyLAN
• 4/16MbpsTokenRing
• Voice
Fast ethernet patch panels
catalog number description
PP2484/25VEFS100 Wall Mount Patch Panel, Telco, 24 Port
DCC2484/25V100 Rack Mount Patch Panel, Telco, 24 Port, 2 RU
DCC3684/25V100 Rack Mount Patch Panel, Telco, 36 Port, 2 RU
DCC4884/25V100 Rack Mount Patch Panel, Telco, 48 Port, 2 RU
DCC9684/25V100 Rack Mount Patch Panel, Telco, 96 Port, 4 RU
DCC4884/25S-100 Rack Mount Patch Panel, Shielded Telco, 48 Port, 2 RU
copper closet cc-12
patch panels
patch panel Accessories
SMP’s IKON kits color code patch panels for easy labeling and to meet EIA/TIA 606 port identification requirements. IKON kits may be used to dress up any A5E™ or Axcess 6™ patch panel. Snap-In Multi-media panels and all kits include enough IKONS to color every port with any 9 colors.
EIA/TIA color coding – SMP color code:
• KeyTelephoneSystemsRed–03
• NetworkCommunicationsGreen–04
• StationBlue–05
• SecondLevelBackboneGray–06
• FirstLevelBackboneWhite–07
• DemarcationPointOrange–08
• MiscellaneousYellow–09
• CommonEquipmentPurple–10
• Inter-buildingBackboneBrown–11
Snap in Multi – Media panels
The ability to be flexible and adaptable to each customer’s unique needs has been SMP’s speciality for years. With SMP’s Snap-In Multi-media patch panels, any combination of UMJ or KMJ style jacks and adapters can be chosen to configure a custom patch panel. All Multi-media patch panels are mountable in any 19” rack.
• PortswillaccommodateanyUMJor KMJ jack or adapter
• Constructedofextrudedaircraftgrade aluminum for durability
• Writeonlabelfields
• IKONcompatible–12colors
axcess™ snap-in multi-media patch panels
catalog number description
A16 Rack Mount Empty Patch Panel, UMJ style, 16 Port, 1 RU
A24 Rack Mount Empty Patch Panel, UMJ style, 24 Port, 2 RU
A32 Rack Mount Empty Patch Panel, UMJ style, 32 Port, 2 RU
A48H Rack Mount Empty Patch Panel, UMJ style, 48 Port, High Density 2 RU
A48 Rack Mount Empty Patch Panel, UMJ style, 48 Port, 4 RU
ACC24U Rack Mount Empty Patch Panel, Angled, UMJ style, 24 port, 1 RU
ACC48U Rack Mount Empty Patch Panel, Angled, UMJ style, 48 port, 2 RU
AK16 Rack Mount Empty Patch Panel, KMJ style, 16 Port, 1 RU
AK24 Rack Mount Empty Patch Panel, KMJ style, 24 Port, 1 RU
AK48H Rack Mount Empty Patch Panel, KMJ style, 48 Port, High Density 2 RU
AK481U Rack Mount Empty Patch Panel, KMJ Style, 48 port, 1RU
AK16STP Rack Mount Empty Patch Panel, KMJ style, Shielded, 16 Port, 1 RU
AK24STP Rack Mount Empty Patch Panel, KMJ style, Shielded, 24 Port, 1 RU
AK48STP Rack Mount Empty Patch Panel, KMJ style, Shielded, 48 Port, 3 RU
ACC24K Rack Mount Empty Patch Panel, Angled, KMJ style, 24 port, 1 RU
ACC24KS Rack Mount Empty Patch Panel, Angled, KMJ style, Shielded, 24 port, 1 RU
ACC48K Rack Mount Empty Patch Panel, Angled, KMJ style, 48 port, 2 RU
ACC48KS Rack Mount Empty Patch Panel, Angled, KMJ style, Shielded, 48 port, 2 RU
iKon Kits
catalog number description
IKON1U IKON Kit for 10-24 Ports, 9 color assortment
IKON2U IKON Kit for 32-48 Ports, 9 color assortment
IKON3U IKON Kit for 64-96 Ports, 9 color assortment
IKON5U IKON Kit for up to 120 Ports, 9 color assortment
IKONxx IKON Kit, Pack of 100 6-port strips
* Replace “xx” with color code (See chart on left)
copper closet cc-13
Zone distriBution solutions
Zone distribution solutions Zone Cross Connect
SMP’s zone distribution solutions optimize any horizontal cabling infrastructure. Through innovative designs, SMP continues to provide zone cross connect solutions that meet every need. Whether using SMP’s 6-Port Interconnect Module or the new “Spider” Zone Module, the convenience and reliability of SMP technology guarantees performance for high speed applications.
25-pair Zone distribution cable assemblies
catalog number description
25Zd/ - 25-pair Zone distribution cable assembly
cable type & category Wiring type end type length in Feet
5eCat 5e Riser
6a568A wired
trTelco Right
epCat 5e Plenum
6B568B wired
tlTelco Left
tsTelco Straight
xBlunt End – No Connector
hrHydra Right
hlHydra Left
hsxx*Hydra Straight
*Replace “xx” with length of legs (12 or 24)
Zone interconnect modules (Field terminable)
catalog number description
ZDIMA5E Zone Interconnect Module, Category 5e, 568A/B wired, 6 port (pictured above)
ZDIMSIX6A/B Zone Interconnect Module, Category 6, 568A/B wired, 6 port (not pictured, mounts to an 89D bracket)
Ex: 25ZD/5E6BTS-100 = 25 Pair Cable Assembly, Zone Distribution module to Telco Straight, Cat 5e Riser, 568B wired, 100 Feet
applications
• 1000BASE-T Gigabit Ethernet
• 100BASE-TX Fast Ethernet
• 10BASE-TEthernet
• BroadbandVideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 4/16MbpsTokenRing
• Voice
SMP’s Interconnect Module offers the ease and compact design to give customers an alternative to multiple outlets in an office environment. The 6 port module allows for termination between 25-Pair cables to modular RJ45 ports at the workstation, minimizing the need for multiple horizontal cable runs.
• Universal568A/Bwiring
• Compactdesignallowsforeasyinstallation
• Idealinmultiplesituations,i.e.underfloor, power pole, and multi-port workstations
• Maybefactoryassembledwithcableor field terminated.
• AllcomponentsmadeintheU.S.
copper closet cc-14
Zone distriBution solutions
Zone Distribution Box
Perfect for serving multiple remote outlets, SMP’s Zone Distribution Box provides an easy connection between a 25-pair cable and six modular ports. Each box is constructed with one female Telco connector and 6-RJ45 jacks, 3 on each side. With its compact design, the Zone Distribution Box can easily be used as a wall mountable mini patch panel for increased cost effectiveness.
• Availablein568Aor568Bwiredapplications
• PatentedPCBoardtechnology
• Idealformultiplesituations,i.e.underfloor, ceiling, and multi-port workstations
• Mountsanywhere
• AllcomponentsmadeintheU.S.
Zone Distribution Jack packs
Created for completely modular connections, the SMP Jack Pack is ideal for any zone distribution application and can easily be mounted anywhere. With performance that exceeds all standards requirements, the Jack Pack offers a multitude of application solutions. Whether mounting to cable tray for a quick cross connect point or using as a distribution site within an equipment room, the SMP Jack Pack offers guaranteed performance in a compact package.
• Availablefor10/100orGigabitEthernet applications
• ExceedsEIA/TIA568Aspecifications
• PatentedPCBoardTechnology
• Compactdesign
• Mountsanywhere
• Alsoavailableinshielded
• AllcomponentsmadeintheU.S.
applications
• 1000BASE-TGigabitEthernet
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• BroadbandVideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 4/16MbpsTokenRing
• Voice
Zone distribution Box
catalog number description
ZDB6VA01 Zone Distribution Box, 568A wired, 6 Port
ZDB6VB01 Zone Distribution Box, 568B wired, 6 Port
Zone distribution Jack packs
catalog number description
ZDIM81225TX Zone Distribution Jack Pack, 10/100 RJ45 to Female Telco, 568B wired, 12 Port
ZDIM8625A Zone Distribution Jack Pack, Gigabit RJ45 to Female Telco, 568A wired, 6 port
ZDIM8625B Zone Distribution Jack Pack, Gigabit RJ45 to Female Telco, 568B wired, 6 Port
ZDIM8625BS Zone Distribution Jack Pack, Gigabit Shielded RJ45 to Female Telco, 568B wired, 6 Port
copper closet cc-15
Zone distriBution solutions
Zone “Spider” Distribution Solutions (for cable tray)
SMP’s new Zone “Spider” Distribution Solutions for cable tray mounting provide a convenient means to access copper network cross connect points. The copper modules are manufactured with Telco PCB assemblies factory installed for fast and easy installations. Simply insert the Telco cable assembly and patch cords and the job is finished. These modules allow customers to take the distribution point out of the equipment room to where it’s needed, while giving installers less installation time and a reduction in cabling costs.
• Availablefor10/100orGigabit Ethernet applications
• ExceedsEIA/TIA568-B.2specifications
• ISO/IEC11801compliant
• PatentedPCBoardTechnology
• Expandabledesignwillfittraywidths from 12" to 18"
• Easyinstallationsandadditionswithoutdisturbingpreviously installed cable
• Reducesthenumberofcablesandcongestion in a cable tray
• AllcomponentsmadeintheU.S.
applications
• 1000BASE-TGigabitEthernet (only on Gigabit Ethernet module)
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• BroadbandVideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 4/16MbpsTokenRing
• Voice
Zone “spider” distribution solution (for cable tray)
catalog number description
ZDMB12/25V100 Zone Distribution Module, 10/100 Telco, 12 Port
ZDMB12A/GBASET21 Zone Distribution Module, Gigabit Telco, 568A wired, 12 Port
ZDMB12B/GBASET21 Zone Distribution Module, Gigabit Telco, 568B wired, 12 Port
copper closet cc-16
caBle assemBlies
cable assembliesAs the industry demands systems with faster installation times and less network interruption, SMP developed a modular solution to meet those specific communications cabling needs. Using 25-pair Telco cable assemblies coupled with SMP Telco patch panels, SMP created a solution that is as simple as Plug-and-Play. SMP’s 25-pair
Telco cable assemblies make moves/adds/changes more flexible, air passages less restricted and data throughput rates uninterrupted.
Each 25-pair assembly is designed to support new interface technology of leading switch manufacturers. Constructed to exceed
EIA/TIA Category 5e specifications, SMP’s Telco assemblies offer guaranteed Gigabit throughput with 100% component testing to their specified protocols. From rack mount to zone distribution, SMP’s PowerSum-Rated 5e assemblies offer a wide variety of options to meet 10/100 and Gigabit Ethernet solutions.
• ExceedsEIA/TIACategory5especifications
• UtilizesULcertifiedCat5e25-paircable
• 100%componenttestingforguaranteedGigabitEthernet performance
• AllTelcotoTelcoassembliesaremale-to-male
• AllHydraassembliesaremanufacturedwith precise leg measurements to span 19” racks or a stand alone switch
• Workswithhigh-density48portblades
• 50-pinTelcoconnectorsavailablein120°or 180° angles
• Availablewithright,left,orstraightconnectors– plenum or non-plenum
• Shielded25-paircableassembliesalsoavailable
applications
• 1000BASE-TGigabitEthernet
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• BroadbandVideo
• 155MbpsATM
• 100MbpsTP-PMD
• 100VGAnyLAN
• 4/16MbpsTokenRing
• Voice
telco to telco Cable Assemblies
25-pair telco to telco cable assemblies
catalog number description
25PA/ - - - 25-Pair Telco to Telco Cable Assembly
end type end type cable type &
category length in Feet
TR Telco Right
TR Telco Right
5E Cat 5e Riser
TLTelco Left
TLTelco Left
EP Cat 5e Plenum
TS Telco Straight
TSTelco Straight
X Blunt End –
No Connector
Ex: 25PA/TR-TR-5E-100 = 25 Pair Cable Assembly with Telco Right to Telco Right, Cat 5e Riser, 100 Feet
copper closet cc-17
caBle assemBlies
Hydra Cable Assemblies:
Ex: 25PA/TRHS1265E-025 = 25 Pair Cable Assembly with Telco Right to Gigabit Hydra Straight, 6 Legs at 12", Cat 5e Riser, 25 Feet* Must use B-wired Telco panel with 6 Leg Gigabit Hydra Assemblies
Ex: 25PA/TRHS24-5E-050 = 25 Pair Cable Assembly with Telco Right to 10/100 Hydra Straight, 12 Legs at 24", Cat 5e Riser, 50 Feet
25-pair telco to gigabit hydra cable assemblies (6 legs)
catalog number description
25PA/ 6 - 25-Pair Telco to Hydra Cable Assembly
end type end type cable type & category
length in Feet
tr Telco Right
hr Hydra Right
5e Cat 5e Riser
tlTelco Left
hlHydra Left
ep Cat 5e Plenum
ts Telco Straight
hsxx*Hydra Straight
x Blunt End -
No Connector
*Replace “xx” with length of legs
(12 or 24)
25-pair telco to 10/100 hydra cable assemblies (12 legs)
catalog number description
25PA/ - - 25-Pair Telco to Hydra Cable Assembly
end type end type cable type & category
length in Feet
tr Telco Right
hr Hydra Right
5e Cat 5e Riser
tlTelco Left
hlHydra Left
ep Cat 5e Plenum
ts Telco Straight
hsxx*Hydra Straight
x Blunt End -
No Connector
*Replace “xx” with length of legs
(12 or 24)
copper closet cc-18
categorY 6 patch cords
Category 5e patch Cords
SMP’s Category 5e patch cords are manufactured to strict standards, ensuring adherence to TIA/EIA 568-B.2 component performance requirements. After all, SMP’s test methods for patch cord component testing methods have helped form the basis for the Category 5e standards. This commitment to guaranteed performance is what makes SMP’s A5E patch cords an excellent addition to any SMP Category 5e structured cabling system
• 100%componentperformancetested
• ExceedsTIA/EIA568-B.2Category5erequirements
• Customizablelengthsandcolorsavailable
Category 6 patch Cords
SMP’s Category 6 patch and workstation cords are the perfect compliment to any SMP Axcess 6™ copper system. SMP’s Axcess 6 cords offer Onyx Grip, a strain relief solution that ensures mechanical and electrical stability during and after adds, moves or changes. In addition, Axcess 6 patch cords utilize straight-thru pair orientation and are 100% component performance tested. SMP’s test methods have formed the basis for standard patch cord component testing methods in TIA/EIA 568-B.2 -1 Category 6 standards ensuring that the Axcess 6 patch cord will guarantee performance.
• 100%componentperformancetested
• ExceedsTIA/EIA568B.2-1specifications
• Customizablelengthsandcolorsavailable
• Shieldedversionavailable
applications
• 1000BASE-TGigabitEthernet
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• BroadbandVideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 4/16MbpsTokenRing
• Voice
• Allapplicationsdevelopedforoperation over Category 6 or class E cabling
applications
• 1000BASE-T Gigabit Ethernet
• 100BASE-TX Fast Ethernet
• 10BASE-TEthernet
• BroadbandVideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 4/16MbpsTokenRing
• Voice
• Allapplicationsdeveloped for operation over Category 5e or class D cabling
axcess 6™ patch cords
catalog number description
PCSIXxxyy Category 6 patch cord without boot
PCSIXxxByy Category 6 patch cord with boot
PCSIXSxxByy Category 6 shielded patch cord with boot
*Replace xx with length in feet; replace yy with color code – (06) gray, (09) yellow** Ex: = PCSIX03B09 – Category 6 patch cord, 3 feet, with boot, yellow
a5e™ patch cords
catalog number description
PC5EBxxyy Category 5e patch cord without boot
PC5EBxxByy Category 5e patch cord with boot
*Replace xx with length in feet; replace yy with color code – (06) gray, (09) yellow** Ex: = PC5EB03B09 – Category 5e patch cord, 3 feet, with boot, yellow
copper closet cc-19
110 Wiring products
110 Wiring products
Whether installing a Category 5e or Category 6 system, SMP offers a complete solution with 110 Block connectivity. SMP’s 110 product line offers easy network cabling consolidation and quick transitions with maximum performance. From wall mount to rack mount 110 blocks and cable organizers, SMP’s selection of products offer customers a solid backbone for an exceptional structured wiring solution.
• ExceedsindustrystandardsforCategory5e and Category 6 specifications, respectively
• 110Blocksmaybefieldterminatedwith 22-26 AWG solid wire
• Colorcodedpairsforeasyidentification
• Designationlabelsincluded
• Orderwithlegswhenbackcaserouting
• Orderwithoutlegswhendepthislimitedor when frame mounting
• 110Blockmaybekittedforeasyinstallations
applications
• 1000BASE-TGigabitEthernet
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• BroadbandVideo
• 155/622/1000MbpsATM
• 100MbpsTP-PMD
• 100VGAnyLAN
• 4/16MbpsTokenRing
• Voice
copper closet cc-20
110 Wiring products
Category 5e 110 Wiring products Category 6 110 Wiring products
Cable organizers
category 5e 110 Wiring products
catalog number description
C410 Category 5e 110 C-4 Connector Blocks
C510 Category 5e 110 C-5 Connector Blocks
DCC50/110EFS* Category 5e Wall Mount 110 Block, 50 Pair, Without Legs
DCC50/110EFSL* Category 5e Wall Mount 110 Block, 50 Pair, With Legs
DCC100/110EFS* Category 5e Wall Mount 110 Block, 100 Pair, Without Legs
DCC100/110EFSL* Category 5e Wall Mount 110 Block, 100 Pair, With Legs
DCC300/110EFS* Category 5e Wall Mount 110 Block, 300 Pair, Without Legs
DCC300/110EFSL* Category 5e Wall Mount 110 Block, 300 Pair, With Legs
DCC300/110EFSTWB Category 5e Wall Mount 110 Tower, 300 Pair, Mounting Frame
DCC300/110EFSTEXP Category 5e Wall Mount 110 Tower, 300 Pair, Extension Mounting Frame
DCC100/110EFSRK Category 5e Rack Mount 110 Block, Kitted 100 Pair
DCC200/110EFSRK Category 5e Rack Mount 110 Block, Kitted 200 Pair
DCC300/110EFSRK Category 5e Rack Mount 110 Block, Kitted 300 Pair
*Place a “K” at the end of the part number for a complete kit. Ex: DCC48/110EFSLK = Category 5e Wall Mount 110 Block with Legs and Connectors
category 6 110 Wiring products
catalog number description
C64-10 Category 6 110 C-4 Connector Blocks
DCC48/110SIX* Category 6 Wall Mount 110 Block, 48 Pair, Without Legs
DCC48/110SIXL* Category 6 Wall Mount 110 Block, 48 Pair, With Legs
DCC96/110SIX* Category 6 Wall Mount 110 Block, 96 Pair, Without Legs
DCC96/110SIXL* Category 6 Wall Mount 110 Block, 96 Pair, With Legs
DCC288/110SIX* Category 6 Wall Mount 110 Block, 288 Pair, Without Legs
DCC288/110SIXL* Category 6 Wall Mount 110 Block, 288 Pair, With Legs
DCC288/110SIXTWB Category 6 Wall Mount 110 Tower, 288 Pair, Mounting Frame
DCC288/110SIXTEXP Category 6 Wall Mount 110 Tower, 288 Pair, Extension Mounting Frame
DCC96/110SIXRK Category 6 Rack Mount 110 Block, Kitted 96 Pair
DCC192/110SIXRK Category 6 Rack Mount 110 Block, Kitted 192 Pair
DCC288/110SIXRK Category 6 Rack Mount 110 Block, Kitted 288 Pair
*Place a “K” at the end of the part number for a complete kit. Ex: DCC48/110SIXLK = Category 6 Wall Mount 110 Block with Legs and Connectors
110 Block cable organizers
catalog number description
COH110 Wall Mount Horizontal Cable Organizer without Legs
COH110L Wall Mount Horizontal Cable Organizer with Legs
DCC300/110EFSTHVCM Wall Mount Vertical Cable Organizer, For 110 Tower
DCC300/110EFSTVCM Wall Mount Vertical Cable Organizer Extension, For 110 Tower
COH110R Rack Mount Horizontal Cable Organizer, 19" Width
copper closet cc-21
W o r K s t a t i o n
W o r K s tat i o n
To offer a comprehensive network infrastructure, SMP
created a complete line of connectivity components to take
guaranteed SMP performance from the equipment room to
the desktop. As with all SMP products, performance is always
the priority. Every SMP jack, whether our proprietary Bezel
design or the standard Keystone version, are 100% tested to
stringent performance standards and all are completely
backward compatible to lower category performance levels.
This attention to detail makes SMP’s jacks and outlet solutions
a clear answer to constructing the perfect structured cabling
system, from telecom room to the desk.
SMP’s workstation product line features a broad range of
quality modular products to meet any structured cabling
application. In addition to delivering unsurpassed performance
and patented SMP technology, SMP’s workstation solutions
provide customers a durable aesthetic appeal to fit any
desktop scenario. And in order to fit any setting, our
workstation products offer the widest ranges of jacks,
adapters, faceplates, surface-mount boxes, and station cords
in a variety of colors and styles. Whether using SMP’s unique
Universal Modular (Bezel) components or the industry standard
Keystone Modular design, SMP has the workstation solution
that will give customers exceptional performance and flexibility
to meet any desktop configuration.
contents:Ws-2 UMJ Jacks and
Adapters
Ws-6 UMJ Faceplates
Ws-10 KMJ Jacks and Adapters
Ws-14 KMJ Faceplates
Ws-17 Wall plates and Connectors
Ws-18 Surface Mount Boxes
Ws-19 Multi-media Boxes
umJ JacKs and adapters
umJ Jacks and adaptersSMP’s Universal Modular Jack offers a unique locking bezel system that allows for easy port identification and labeling at the work center. This jack and bezel combination create a superior hold on the faceplate or box, making it virtually impossible to accidentally remove the jack. More than the aesthetic appeal and convenience the UMJ jack offers, it is designed to support emerging high performance platforms that exceed category specifications.
Category 6a outlet Jacks(See Copper Closet, page CC-6)
Category 6 Jacks
SMP’s Axcess 6™ jacks are world-class performers with patented printed circuit board technology to provide true Category 6 component performance on all pair combinations. With a standard 110 style punch down termination, SMP’s Category 6 UMJ style jacks are manufactured to comply with TIA component performancerequirementsandareETLVerifiedtoTIA/EIA 568-B.2-1 Cat 6 standards. Each UMJ Cat 6 jack utilizes universal T568A/B wiring and is backward compatible with Category 3, 5, and 5e.
• MeetsIEC60603-7requirements
• 110styleIDCcontactsmeet TIA/EIA 568-B.2 requirements
• ETLVerifiedtoTIA/EIA568-B.2-1Cat6
• Backwardcompatible,Cat3,5,and5ecompliant
• Full6-position,modularplugcompatiblewithbezel
• UniversalT568A/Bwiringforeasyinstallation
• TERMAGripconductor&jacketretentionfor easy wiring
• Availablewith20labelingandcoloroptions
• Securemountinglocksjackintofaceplate
• FitsallSMPAxcess™faceplatesandsurface mount boxes
applications
• TIA/EIA854Gigabit Ethernet over Cat 6 Cabling
• 1000BASE-TGigabitEthernet
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• BroadbandVideo
• 270Mbpsdigitalvideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 100VG-AnyLan
• 4/16MbpsTokenRing
• Voice
axcess 6™ umJ Jacks
catalog number description
UMJA6 Axcess 6™ UMJ Category 6 Jack, Universal 568A/B wiring, no bezel
UMJA6xx Axcess 6™ UMJ Category 6 Jack, Universal 568A/B wiring, colored bezel
UMJA650xx Axcess 6™ UMJ Category 6 Jack, Universal 568A/B wiring, 50 pack
* Replace “xx” with color code – see color code chart on page WS-5
WorKstation Ws-2
umJ JacKs and adapters
Category 5e Jacks
SMP’s Axcess™ Category 5e Bezel jacks utilize SMP’s patented PC Board technology to exceed the ANSI/TIA/EIA 568-B.2 category 5e requirements with headroom to spare. For a more cost effective solution, SMP also offers a Leadframe Bezel jack that utilizes SMP’s
patented Leadframe technology. 110 style punch downs accommo-date 22 AWG solid through 26 AWG solid and 24 AWG stranded conductors and each SMP jack offers universal T568A/B wiring and performance enhancements to exceed industry standards.
• 110styleIDCcontactsmeet TIA/EIA 568-B.2 requirements
• Backwardcompatible,Cat3,andCat5compliant
• Full6-position,modularplugcompatiblewithbezel
• UniversalT568A/Bwiringforeasyinstallation
• TERMAGripconductor&jacketretention for easy wiring
• Availablewith20labelingandcoloroptions
• Securemountinglocksjackintofaceplate
• FitsallSMPAxcess™faceplatesandsurface mount boxes
Category 3 Voice Grade Jacks
SMP’s Category 3 Jacks offer customers SMP’s patented Leadframe technology for a cost effective solution to voice grade systems. 110 style IDC connectors on back for 26, 24, and 22 AWG solid conductors, make SMP’s Category 3 jacks easy to install and offer unmatched
performance. Add the locking color/icon bezel to provide distinctive jack identification.
• 110styleIDCcontacts
• TERMAGripconductor&jacketretention for easy wiring
• Availablewith20labelingandcoloroptions
• Securemountinglocksjackintofaceplate
• FitsallSMPAxcess™faceplatesandsurface mount boxes
applications
• 1000BASE-T Gigabit Ethernet
• 100BASE-TX Fast Ethernet
• 10BASE-TEthernet
• BroadbandVideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 4/16MbpsTokenRing
• Voice
a5e™ umJ Jacks
catalog number description
UMJA5E A5E™ UMJ Category 5e Jack, Universal 568A/B wiring, no bezel
UMJA5Exx A5E™ UMJ Category 5e Jack, Universal 568A/B wiring, colored bezel
UMJA5E50xx A5E™ UMJ Category 5e Jack, Universal 568A/B wiring, 50 pack
UMJVL8A/B A5E™ UMJ Category 5e Leadframe Jack, Universal 568A/B wiring, no bezel
UMJVL8A/Bxx A5E™ UMJ Category 5e Leadframe Jack, Universal 568A/B wiring, colored bezel
UMJVL8A/B50xx A5E™ UMJ Category 5e Leadframe Jack, Universal 568A/B wiring, 50 pack
* Replace “xx” with color code – see color code chart on page WS-5
axcess™ umJ category 3 Jacks
catalog number description
UMJL06U Axcess™ Jack USOC 6x6 Leadframe, 110 style, no bezel
UMJL06Uxx Axcess™ Jack USOC 6x6 Leadframe, 110 style, colored bezel
UMJL08U Axcess™ Jack USOC 8x8 Leadframe, 110 style, no bezel
UMJL08Uxx Axcess™ Jack USOC 8x8 Leadframe, 110 style, colored bezel
UMJL08A/B Axcess™ Jack 568A/B, 8x8 Leadframe, 110 style, no bezel
UMJL08A/Bxx Axcess™ Jack 568A/B, 8x8 Leadframe, 110 style, colored bezel
* Replace “xx” with color code – see color code chart on page WS-5
WorKstation Ws-3
umJ JacKs and adapters
UMJ Adapters
For multi-media options, SMP created a complete line of data, video, and audio ports for fiber, copper, coaxial and speaker cables. Combined with the multi-color, low-profile recessed Bezels, SMP’s UMJ style adapters are a flexible alternative for port identification, no matter what the application.
• Availablewith12coloroptions
• Securemountinglocksadaptersintofaceplate
• FitsallSMPAxcess™faceplatesandsurface mount boxes
APBLK01
AASTM01
AASCM01
AARCA01
AABNC01
AAF01
axcess™ umJ adapters
catalog number description
AASCMxx Axcess™ UMJ snap-in SC Multi-mode adapter
AASCSxx Axcess™ UMJ snap-in SC Single-mode adapter
AASTMxx Axcess™ UMJ snap-in ST Multi-mode adapter
AASTSxx Axcess™ UMJ snap-in ST Single-mode adapter
AADLCMxx Axcess™ UMJ snap-in Dual LC Multi-mode adapter
AAFxx Axcess™ UMJ snap-in F coupler
AABNCxx Axcess™ UMJ snap-in BNC coupler
AASVHSxx Axcess™ UMJ snap-in Super VHS coupler
AARCAxx Axcess™ UMJ snap-in RCA adapter with solder tab
APBLKxx Axcess™ UMJ snap-in Blank Bezel (20 pack)
* Replace “xx” with color code – see color code chart on page WS-5
WorKstation Ws-4
umJ JacKs and adapters
Bezels
Whether ordering kitted or separate for field installations, SMP’s unique bezel system offers an easy and affordable alternative for desktop port identification. Bezels may be ordered blank or labeled and with a multitude of colors to choose from. The flexibility and variety of combinations for workstation labeling are endless.
• 12differentcolorand4labelingoptions
• Standardpackageofbezelis20perbag
• Canbeeasilycustomizedorkittedwithjacks/adapters for special orders
• Availablefor6or8positionplugs
• Locksthejackoradapterintothefaceplate
• Shutteredbezelsavailablefordustprotection
axcess™ umJ Bezels
B E - - Optional Optional
position color text options
06 = 6 Position * See color chart below
V = Voice K = Keyed
08 = 8 Position D = Data S = Shuttered
F = Fax Blank = None
M = Modem
Blank = None
axcess™ umJ color code chart
code color code color
00 Electrical Ivory 07 White
01 Office White 08 Orange
02 Black 09 Yellow
03 Red 10 Purple
04 Green 11 Brown
05 Blue 12 Bright White
06 Data Gray
WorKstation Ws-5
umJ Faceplates
umJ FaceplatesSMP’s Workstation solution isn’t complete without our Axcess™ faceplates. Available in a multitude of configurations and designed to meet any application, the Axcess™ faceplates for UMJ style jacks and adapters offer a convenient and aesthetically appealing solution for any desktop purpose.
Commercial Faceplates
• CommercialgradefaceplatesacceptanyUMJBezeljack or adapter
• IDwindowsincludewrite-onlabelsandplasticprotective covers
• Slottedmountingholessimplifyinstallation
• Availableinmostpopularcolors
• CommercialgradefaceplatesacceptanyUMJ Bezel jack or adapter
• VerticalIDwindowsprovideeasieridentificationchanges and removal of plate for jack access
• IDwindowsincludewrite-onlabelsandplasticprotective cover
• Availableinmostpopularcolors
• Angledfaceplatesreducestrainonexisting station cables
• IDwindowsincludewrite-onlabelsand plastic protective cover
• Availableinmostpopularcolors
axcess™ umJ commercial Faceplates
catalog number description
FPSR01xx Single gang commercial faceplate, recessed UMJ, 1 port
FPSR02xx Single gang commercial faceplate, recessed UMJ, 2 port
FPSR03xx Single gang commercial faceplate, recessed UMJ, 3 port
FPSR04xx Single gang commercial faceplate, recessed UMJ, 4 port
FPSR06xx Single gang commercial faceplate, recessed UMJ, 6 port
DP01xx Double gang commercial faceplate, UMJ, 1 port
DP02xx Double gang commercial faceplate, UMJ, 2 port
DP03xx Double gang commercial faceplate, UMJ, 3 port
DP04xx Double gang commercial faceplate, UMJ, 4 port
DP06xx Double gang commercial faceplate, UMJ, 6 port
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White
axcess™ umJ Vertical Window commercial Faceplates
catalog number description
FPRSV03xx Single gang commercial faceplate, vertical window UMJ, 3 port
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White
axcess™ umJ commercial angled Faceplates
catalog number description
FP04Axx Single gang commercial faceplate, angled UMJ, 4 port
DP08Axx Double gang commercial faceplate, angled UMJ, 8 port
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White
WorKstation Ws-6
umJ Faceplates
Residential Faceplates
• SmoothsurfacefaceplatesacceptanyUMJBezeljack or adapter
• Bezelopeningsarerecessedforneaterappearance
• Availableinmostpopularcolors
Stainless Steel Faceplates
• StainlessSteelfaceplatesacceptany UMJ Bezel jack or adapter
• Corrosionresistant
• Maybeorderedwithtamperproofscrews
axcess™ umJ residential Faceplates
catalog number description
FPR01xx Single gang smooth faceplate, UMJ, 1 port
FPR02xx Single gang smooth faceplate, UMJ, 2 port
FPR03xx Single gang smooth faceplate, UMJ, 3 port
FPR04xx Single gang smooth faceplate, UMJ, 4 port
FPR06xx Single gang smooth faceplate, UMJ, 6 port
SDP01xx Double gang smooth faceplate, UMJ, 1 port
SDP02xx Double gang smooth faceplate, UMJ, 2 port
SDP03xx Double gang smooth faceplate, UMJ, 3 port
SDP04xx Double gang smooth faceplate, UMJ, 4 port
SDP06xx Double gang smooth faceplate, UMJ, 6 port
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White
axcess™ umJ stainless steel Faceplates
catalog number description
FP01SS Single gang stainless steel faceplate, UMJ, 1 port
FP02SS Single gang stainless steel faceplate, UMJ, 2 port
FP03SS Single gang stainless steel faceplate, UMJ, 3 port
FP04SS Single gang stainless steel faceplate, UMJ, 4 port
FP06SS Single gang stainless steel faceplate, UMJ, 6 port
DP01SS Double gang stainless steel faceplate, UMJ, 1 port
DP02SS Double gang stainless steel faceplate, UMJ, 2 port
DP03SS Double gang stainless steel faceplate, UMJ, 3 port
DP04SS Double gang stainless steel faceplate, UMJ, 4 port
DP06SS Double gang stainless steel faceplate, UMJ, 6 port
WorKstation Ws-7
umJ Faceplates
office Furniture Faceplates
• Fitsmostpopularofficefurnitureincluding Herman Miller and Steelcase
• Availableingrayorblack
• Attractiveandfunctional
Front Axcess™ Faceplates
• CustomconfigurabletoaccommodateUMJandKMJ style jacks and adapters
• Accommodatesthreeindividualmodulesforultimate flexibility
• Additionalcablestoragedepth
• Slimdesign
axcess™ umJ office Furniture Faceplates
catalog number description cut out dimensions
office Furniture compatible
herman miller steel case haworth hon other
FAP3xx Furniture faceplate, 3 port 2.65”W x 1.35”H X X X
FAP302-HM Furniture faceplate, 3 port 2.98”W x 1.88”H X
FAP4xx Furniture faceplate, 4 port 5.25”W x 1.37”H X X
* Replace “xx” with color choice: 02 = Black or 06 = Data Gray
Front axcess™ umJ & KmJ Front axcess Faceplates
catalog number description
FP-FAOR-xx Front Axcess™ faceplate, single gang ring
FAOC-1A-xx Front Axcess™ UMJ faceplate, 1 port insert
FAOC-2A-xx Front Axcess™ UMJ faceplate, 2 port insert
FAOC-B-xx Front Axcess™ faceplate, blank insert
FAOC-VGA1-xx Front Axcess™ faceplate, 1 VGA insert
FAOC-1K-xxS Front Axcess™ KMJ faceplate, 1 port insert
FAOC-2K-xxS Front Axcess™ KMJ faceplate, 2 port insert
FP-FAU222-xx Front Axcess™ faceplate kit, (3) 2 port UMJ inserts
FP-FAU221-xx Front Axcess™ faceplate kit, (2) 2 port UMJ inserts, (1) 1 port UMJ insert
FP-FAU220-xx Front Axcess™ faceplate kit, (2) 2 port UMJ inserts, (1) blank insert
FP-FAU211-xx Front Axcess™ faceplate kit, (1) 2 port UMJ insert, (2) 1 port UMJ inserts
FP-FAU210-xx Front Axcess™ faceplate kit, (1) 2 port UMJ insert, (1) 1 port UMJ insert, (1) blank insert
FP-FAU200-xx Front Axcess™ faceplate kit, (1) 2 port UMJ insert, (2) blank inserts
FP-FAU111-xx Front Axcess™ faceplate kit, (3) 1 port inserts
FP-FAU110-xx Front Axcess™ faceplate kit, (2) 1 port inserts, (1) blank insert
FP-FAU100-xx Front Axcess™ faceplate kit, (1) 1 port insert, (2) blank inserts
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White
WorKstation Ws-8
umJ Faceplates
Divax Faceplates
• Designedtoblendinwithanyhomeorofficedécor
• CompletelycompatiblewithDIVAXsingle-gangrectangular electrical plates
• Mountsinanystandardelectricalbox
• CanbeusedwithallDIVAXtypeswitches
• Smooth,cleansurface
• Ultimateflexibility
office Furniture Faceplates
• Fitsinsideanystandardelectricalfaceplate
• AccommodatestwoUMJports
axcess™ umJ divax style Faceplates
catalog number description
FDRxx Divax faceplate, UMJ, single gang ring
FDBxx Divax faceplate, UMJ, blank insert
FDUxx Divax faceplate, UMJ, 1 port Axcess™ insert
FD2Uxx Divax faceplate, UMJ, 2 port Axcess™ insert
FD3Uxx Divax faceplate, UMJ, 3 port Axcess™ insert
FDFxx Divax faceplate, UMJ, 1 port Co-ax insert
FD2Fxx Divax faceplate, UMJ, 2 port Co-ax insert
* Replace “xx” with color choice: 00 = Electrical Ivory, 01=White, 07 = White or 12=Bright White
axcess™ umJ receptacle insert
catalog number description
A106xx UMJ Receptacle Insert, 2 port
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, or 07 = White
WorKstation Ws-9
KmJ JacKs and adapters
As an alternative to SMP’s unique UMJ jacks and adapters, SMP has created a Keystone product line to meet the demands of industry standard installa-tions. SMP’s Keystone jacks may have been designed to keep pace with standard installations, but in keeping with the SMP guarantee of excellence, every KMJ jack was created with SMP’s superior perfor-mance in mind. Each Keystone Modular Jack is component compliant to Category 3, Category 5e, and Category 6 standards and exceeds their respective category specifications. All KMJ jacks offer universal T568A/B wiring and 110 style punch downs for easy installations, making SMP’s KMJ product line a guaranteed connection.
KmJ Jacks and adapters
Category 6 Jacks
SMP’s KMJ jacks offer the same great printed circuit board technol-ogy that the UMJ jacks do to provide best-in-class Category 6 component performance. With standard 110 style terminations, SMP’s Category 6 KMJ jacks are ETL verified to TIA/EIA 568-B.2-1 Category 6 specifications and are
backward compatible to Category 3.
• ETLVerifiedtoTIA/EIA568-B.2-1Cat6
• Category6componentcompliant
• Mountingflexibility
• Large,easytoreadcolorcodelabels
• UniversalT568A/Bwiringforeasyinstallation
• Longtermapplicationconfidence
• CompliantwithpoweroverEthernetrequirements
• Backwardcompatible,Cat3,5,&5ecompliant
• TERMAGripconductorandjacketretentionfor easy wiring
• FitsallSMPKeystonefaceplatesandsurface mount boxes
Category 6a outlet Jacks(See in Copper Closet section 2-6)
applications
• TIA/EIA854GigabitEthernet over Cat 6 Cabling
• 1000BASE-TGigabitEthernet
• 100BASE-TXFastEthernet
• 10BASE-TEthernet
• BroadbandVideo
• 270Mbps digital video
• 155/622MbpsATM
• 100MbpsTP-PMD
• 100VG-AnyLan
• 4/16MbpsTokenRing
• Voice
KmJ category 6 Jacks
catalog number description
KMJA6xx KMJ Category 6 jack, Universal 568A/B wiring
KMJA650xx KMJ Category 6 jack, Universal 568A/B wiring, 50 pack
KMJA602S KMJ Category 6 shielded jack, slimline, Universal 568A/B wiring
* Replace “xx” with color code – see color code chart on page WS-11
WorKstation Ws-10
KmJ JacKs and adapters
Category 5e Jacks
The SMP Category 5e Keystone Modular Jack is a great alternative for high-density applications. Featuring a
lower profile and a snap-in design, the KMJ Category 5e jacks by SMP offer exceptional performance that exceeds industry standards. Offering Universal T568A/B wiring and component compliance to Cat 5e specifications, these Keystone jacks may be
ordered with SMP’s patented PC board technology or in a leadframe configuration for cost effective solutions.
• 110styleIDCcontactsmeet TIA/EIA 568-B.2 requirements
• Backwardcompatible,Cat3,andCat5compliant
• UniversalT568A/Bwiringforeasyinstallation
• TERMAGripconductor&jacketretentionfor easy wiring
• Availablein12coloroptions
• FitsallSMPKeystonefaceplatesandsurface mount boxes
applications
• 1000BASE-T Gigabit Ethernet
• 100BASE-TX Fast Ethernet
• 10BASE-TEthernet
• BroadbandVideo
• 270Mbpsdigitalvideo
• 155/622MbpsATM
• 100MbpsTP-PMD
• 4/16MbpsTokenRing
• Voice
KmJ category 5e Jacks
catalog number description
KMJA5Exx KMJ Category 5e Jack, Universal 568A/B wiring
KMJA5E50xx KMJ Category 5e Jack, Universal 568A/B wiring, 50 pack
KMJVL8A/Bxx KMJ Category 5e Leadframe Jack, Universal 568A/B wiring
KMJVL8A/B50xx KMJ Category 5e Leadframe Jack, Universal 568A/B wiring, 50 pack
KMJVL8A/B02S KMJ Category 5e Leadframe Shielded Jack, Universal 568A/B wiring
* Replace “xx” with color code – see color code chart below
KmJ color code chart
code color code color
00 Electrical Ivory 07 White
01 Office White 08 Orange
02 Black 09 Yellow
03 Red 10 Purple
04 Green 11 Brown
05 Blue 12 Bright White
06 Data Gray
WorKstation Ws-11
KmJ JacKs and adapters
KMJ Feed-through Cat 5e Jack
SMP’s Category 5e Feed-through Jack offers exceptional connectivity and workstation versatility.
Category 3 Voice Grade Jacks
For voice grade applications, SMP offers a Keystone Modular Jack that exceeds performance specifications to any Category 3 requirement. SMP’s KMJ Category 3 jacks offer easy installations
with 110 style terminations on back for 26, 24, and 22 AWG solid conductors and delivers unsurpassed performance, keeping with SMP’s guarantee for consistent performance.
• 110styleIDCcontacts
• TERMAGripconductor&jacketretentionfor easy wiring
• Availablein12coloroptions
• FitsallSMPKeystonefaceplatesandsurface mount boxes
KmJ category 5e Feed-through Jacks
catalog number description
KMJ5EFT02 KMJ Category 5e Jack, Feed-through, Black
KmJ category 3 Jacks
catalog number description
KMJL8A/Bxx KMJ Jack 568A/B, 8x8 Leadframe, 110 style
KMJL06Uxx KMJ Jack USOC, 6x6 Leadframe, 110 style
* Replace “xx” with color code – see color code chart on page WS-11
WorKstation Ws-12
KmJ JacKs and adapters
KMJ Adapters
SMP’s Keystone adapters complete the product line by offering a full array of data, video, and audio ports for fiber, copper, coaxial and speaker cables. Featuring snap-in accessibility and a wide arrange of multi-media options, the SMP KMJ adapter line gives customers a flexible solution to meet any connectivity demand.
• FitsallSMPKeystonefaceplatesandsurface mount boxes
AKSVHS12
AKF12
AKRCA110B12
AKSCM01
AKRCAP12
AKBLK12
AKRCA110Y12
AKBP212
AKDLCM00
AKSTM12
KmJ adapters
catalog number description
AKSCMxx KMJ snap-in SC Multi-mode adapter
AKSTMxx KMJ snap-in ST Multi-mode adapter
AKDLCMxx KMJ snap-in Dual LC Multi-mode adapter
AKBNCxx KMJ snap-in BNC coupler
AKFxx KMJ snap-in F coupler
AKSVHSxx KMJ snap-in Super VHS adapter
AKRCAPxx KMJ snap-in Gold-plated RCA Bulkhead adapter
AKRCA110yxx KMJ snap-in RCA to 110 adapter
AKBP2xx KMJ snap-in Gold-plated Binding Posts (pair)
AKBC2xx KMJ snap-in Gold-plated Banana adapters (pair)
AKBLKxx KMJ snap-in Blank adapters
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White* Replace “y” with color inset choice: R = Red, Y = Yellow, B = Black, or W = White
WorKstation Ws-13
KmJ Faceplates
KmJ FaceplatesSMP’s Keystone line of faceplates offers customers a versatile and flexible approach to any workstation demand. Available to meet a variety of configurations, SMP’s KMJ faceplates offer convenience in a visually appealing solution for any desktop purpose.
• Keystonecommercialgradefaceplates accept any KMJ style jack or adapter
• IDwindowsincludewrite-on labels and plastic protective covers
• Slottedmountingholes simplify installation
• Availableinmostpopularcolors
• Angledfaceplatereducesstrainonexisting station cables
Commercial Faceplates
KmJ commercial Faceplates
catalog number description
FPSK01xx Single gang commercial faceplate, KMJ, 1 port
FPSK02xx Single gang commercial faceplate, KMJ, 2 port
FPSK03xx Single gang commercial faceplate, KMJ, 3 port
FPSK04xx Single gang commercial faceplate, KMJ, 4 port
FPSK06xx Single gang commercial faceplate, KMJ, 6 port
DPSK06xx Double gang commercial faceplate, KMJ, 6 port
DPSK12xx Double gang commercial faceplate, KMJ, 12 port
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White
KmJ commercial angled Faceplates
catalog number description
FPSK04Axx Single gang commercial faceplate, angled KMJ, 4 port
DPSK08Axx Double gang commercial faceplate, angled KMJ, 8 port
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White
WorKstation Ws-14
KmJ Faceplates
Stainless Steel Faceplates
• StainlessSteelConstruction
• AccommodatesanyKMJjackoradapter
• Corrosionresistant
Residential Faceplates
• Smoothsurfacefaceplates accept any KMJ jack or adapter
• Availablein oversized for coverage of imperfect drywall cuts
• Threecoloroptions
KmJ residential Faceplates
catalog number description
FPKS01xx Single gang smooth faceplate, KMJ, 1 port
FPKS02xx Single gang smooth faceplate, KMJ, 2 port
FPKS03xx Single gang smooth faceplate, KMJ, 3 port
FPKS04xx Single gang smooth faceplate, KMJ, 4 port
FPKS06xx Single gang smooth faceplate, KMJ, 6 port
FPK01xx Single gang smooth faceplate, Oversized, KMJ, 1 port
FPK02xx Single gang smooth faceplate, Oversized, KMJ, 2 port
FPK03xx Single gang smooth faceplate, Oversized, KMJ, 3 port
FPK04xx Single gang smooth faceplate, Oversized, KMJ, 4 port
FPK06xx Single gang smooth faceplate, Oversized, KMJ, 6 port
DPK06xx Double gang smooth faceplate, KMJ, 6 port
DPK12xx Double gang smooth faceplate, KMJ, 12 port
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White
KmJ stainless steel Faceplates
catalog number description
FPSK01SS Single gang stainless steel faceplate, KMJ, 1 port
FPSK02SS Single gang stainless steel faceplate, KMJ, 2 port
FPSK03SS Single gang stainless steel faceplate, KMJ, 3 port
FPSK04SS Single gang stainless steel faceplate, KMJ, 4 port
FPSK06SS Single gang stainless steel faceplate, KMJ, 6 port
DPSK04SS Double gang stainless steel faceplate, KMJ, 4 port
DPSK06SS Double gang stainless steel faceplate, KMJ, 6 port
DPSK12SS Double gang stainless steel faceplate, KMJ, 12 port
WorKstation Ws-15
KmJ Faceplates
Divax Faceplates
• Designedtoblendinwithanyhomeorofficedécor
• CompletelycompatiblewithDIVAXsingle-gangrectangular electrical plates
• Mountsinanystandardelectricalbox
• CanbeusedwithallDIVAXtypeswitches
• Smooth,cleansurface
• Ultimateflexibility
Receptacle Housing inserts
• Fitsinsideanystandardelectrical faceplate
• AccommodatestwoorfourKMJ ports
industrial Faceplate Kit
• Industrialfaceplatekitincludes plate and industrial jack housing
• Sealalsoincludedforcomplete water resistance
• AcceptsanyKMJjack
• KMJJacknotincluded
KmJ divax Faceplates
catalog number description
FDKRxx Divax faceplate, KMJ, single gang ring
FDK2Rxx Divax faceplate, KMJ, double gang ring
FDK3Rxx Divax faceplate, KMJ, triple gang ring
FDK4Rxx Divax faceplate, KMJ, quad gang ring
FDBKxx Divax plate, KMJ, blank insert
FDKxx Divax plate, KMJ, 1 port insert
FD2Kxx Divax plate, KMJ, 2 port insert
FD3Kxx Divax plate, KMJ, 3 port insert
FD4Kxx Divax plate, KMJ, 4 port insert
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 07=White or 12 = Bright White
KmJ receptacle inserts
catalog number description
A106Kxx KMJ Receptacle Insert, 2 port
A106K4xx KMJ Receptacle Insert, 4 port
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, or 12 = Bright White
KmJ industrial Faceplate Kit
catalog number description
FPWR01xx KMJ Industrial faceplate kit with housing, vertical ID window, 1 port
FPWR02xx KMJ Industrial faceplate kit with housing, vertical ID window, 2 ports
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 12 = Bright White, or SS = Stainless Steel
WorKstation Ws-16
Wall plates & connectors
Wall plates & connectorsFor standard voice grade applications, SMP has developed a durable and practical solution that meets any residential or commercial protocol. Featuring SMP’s superior performance jacks, the SMP wall plate is guaranteed to be ideal for any single jack application.
• AvailableinStainlessSteelorfireretardantPlastic
• Easilymountsonanywall
• Mountingscrewsprovided
For applications requiring both voice grade and coaxial access, SMP created a line of smooth standard-size flush mount plates with jacks and/or f-connectors in a single-gang format. All of these wall plates install easily into standard electrical boxes and offer 110 style terminations for easy installations.
• One-piececonstruction
• Easilymountstoany standard electrical box
• 110stylepunch-down termination
• Mountinghardwareincluded
smp standard commercial/residential Wall plate
catalog number description
WP07 Plastic wall plate, 6 position, USOC jack, 1 port, White
WPSS Stainless Steel wall plate, 6 position, USOC jack, 1 port
WP-5E-SS Stainless Steel wall plate, Category 5e jack, 1 port
WP-A6-SS Stainless Steel wall plate, Category 6 jack, 1 port
smp Wall plates with connectors
catalog number description
WP1V12 Plastic wall plate with (1) 6 position, 4 conductor modular jack, Bright White
WP2V12 Plastic wall plate with (2) 6 position, 4 conductor modular jacks, Bright White
WP1F12 Plastic wall plate with (1) twist-on F-connector, Bright White
WP2F12 Plastic wall plate with (2) twist-on F-connectors, Bright White
WP1V1F12 Plastic wall plate with (1) 6 position, 4 conductor modular jack and (1) twist-on F-connector, Bright White
WorKstation Ws-17
surFace mount Boxes
surface mount BoxesWhether installing single or double gang faceplates, SMP’s Surface Mount boxes provide the depth for proper cable orientation into jacks or adapters with easy knock-outs for quick terminations. Ideal for raceway applications, SMP’s Surface Mount boxes offer a flexible approach for workstation applications.
• AvailableinSingleandDoublegang
• Mountingscrews,double-sidedtape,and cable ties included
• Perfectforracewayorcabletrayapplications
• WillaccommodateanySMPUMJorKMJfaceplate
Surface Mount Enclosures
SMP’s Surface Mount Enclosures are a low-profile, workstation solution that offers flexibility for multiple network configurations. In addition, the Axcess™ Surface Mount Enclosures are a cost effective approach for multiple desktop applications including cubicle settings and numerous workstation complexes.
• AvailableforUMJorKMJstylejacksandadapters
• Knockoutsonthreesidesaswellasinthebase for easy cable entry
• Portdesignationincludedalongwithblank port cover(s)
• Designationwindows
• Mountingscrews,double-sidedtapeandcable ties included
axcess™ surface mount Boxes
catalog number description
SMSGxx Surface Mount Box, single gang
SMDGxx Surface Mount Box, double gang
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White, 07 = White, or 12 = Bright White,
axcess™ umJ surface mount enclosures
catalog number description
SME2xx Surface Mount Enclosure, UMJ, 2 port
SME4xx Surface Mount Enclosure, UMJ, 4 port
SME8xx Surface Mount Enclosure, UMJ, Slim-line, 8 port
SME10xx Surface Mount Enclosure, UMJ, Slim-line,10 port
KMJ Surface Mount Enclosures
SMEK1xx Surface Mount Enclosure, KMJ, 1 port
SMEK2xx Surface Mount Enclosure, KMJ, 2 port
SMEK6xx Surface Mount Enclosure, KMJ, 6 port
* Replace “xx” with color choice: 00 = Electrical Ivory, 01 = Office White (SME UMJ style only), 07 = White, or 12 = Bright White
WorKstation Ws-18
multi-media Boxes
multi-media boxesFor conditions that require a variety of media applications, consider SMP’s full product line of Multi-media boxes. The Multi-media box by SMP is a one-stop solution for all your workstation applications. It offers complete flexibility in design and can be kitted for multiple hardware options.
• Optionalplatesavailable
• Completekitsarereadyforinstallation
• Idealforsmallzonedistributionapplications
• FiberstoragemeetsTIA/EIAspecifications
• AvailableonlyforUMJstylejacksandadapters
smp multi-media Boxes
catalog number description
MMAPxx Multi-media box, UMJ, Blank
MMAPxxA1 Multi-media box, UMJ, Optional plate, 1 port
MMAPxxA2 Multi-media box, UMJ, Optional plate, 2 port
MMAPxxA4 Multi-media box, UMJ, Optional plate, 4 port
MMAPxxA6 Multi-media box, UMJ, Optional plate, 6 port
MMAPxxDSC1 Multi-media box, UMJ, Optional plate, (1) SM/MM Dual SC port loaded
MMAPxxDSC2 Multi-media box, UMJ, Optional plate, (2) SM/MM Dual SC ports loaded
MMAPxxDSC3 Multi-media box, UMJ, Optional plate, (3) SM/MM Dual SC ports loaded
MMA77xxP2W4 Multi-media box, UMJ, Kitted, 4 port & 3 blank sides
MMA77xxP2W6 Multi-media box, UMJ, Kitted, 6 port & 3 blank sides
MMA77xxP2W Multi-media box, UMJ, Kitted, 3 blank sides
* Replace “xx” with color choice: 00 = Electrical Ivory or 01 = Office White
WorKstation Ws-19
WorKstation Wiring diagrams
Workstation Wiring Diagrams
WorKstation Ws-20
c o p p e r u t p c a B l e
High quality Prysmian UTP cable is fully tested and
performance qualified with SMP workstation and copper
closet connectivity products.
contents:
cu-2 Cat5e UTP Cable
cu-3 Cat6 UTP Cable
c o p p e r u t p c a B l e
The information contained on pages CU-2 and CU-3 is subject to normal manufacturing tolerances. Specifications are subject to change without notice.Important Notice: Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.Warranty; Limited Remedy; Limited Liability: This product will be free from defects in material and manufacture at the time of purchase. PRYSMIAN MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at Prysmian’s option, to replace or repair the Prysmian product or refund the purchase price of the Prysmian product. Except where prohibited by law, Prysmian will not be liable for any indirect, special, incidental or consequential loss or damage arising from this Prysmian product.
copper utp caBle cu-2
4pair/0.51mm unshielded twisted pair (utp) enhanced category 5
cable description:Plainannealedcopperconductors,solidpolyethyleneinsulated,twistedpair,flameretardantPVCoverallsheathed.100Ω balanced cable suitable for Local Area Network (LAN) for horizontal distribution and backbone network cabling(100MHz).Suitablefor16MbpsTokenRing/155MbpsATMPMD/100Base–VG,T4,X,1000BaseT(Gigabit Ethernet), etc. Cable is UL listed.
Frequency(MHz.)
attenuationMaX
(dB/100m)
Pr – PrneXt Min(dB/100m)
Power SuMneXt Min (dB/100m)
Pr– Pracr Min
(dB)
Power SuMacr Min
(dB)
Pr – PreLFeXt Min(dB/100m)
Power SuMeLFeXt Min(dB/100m)
returnLoSS Min(dB/100m)
1.0 2.1 65.3 62.3 63.2 60.2 63.8 60.8 —
4.0 4.0 56.3 53.3 52.3 49.3 51.8 48.8 23.0
10.0 6.3 50.3 47.3 44.0 41.0 43.8 40.8 25.0
16.0 8.0 47.2 44.2 39.2 36.2 39.7 36.7 25.0
20.0 9.0 45.8 42.8 36.8 33.8 37.8 34.8 25.0
31.25 11.4 42.9 39.9 31.5 28.5 33.9 30.9 23.6
62.5 16.5 38.4 35.4 21.8 18.8 27.9 24.9 21.5
100.0 21.3 35.3 32.3 14.0 11.0 23.8 20.8 20.1
categorY 5e utp caBle
dimensions and mass:Overall cable diameter (nominal): 5.2 mmMass (nominal): 30.5 kg/km
specifications: EIA/TIA 568, ISO/IEC 11801, AS/NZS 3080 and AS/ACIF S008
mechanical characteristics:Minimum bending radius [mm]: 40Maximum pulling tension [N]: 150 Operating temperature range [ºC]: -20 to +60
Fire resistance characteristics:Cable meets IEC332, part 1 Specification: “Test on a single vertical insulated wire or cable”
electrical characteristics:DC resistance [Ω/100m]: 9.38 Max.Resistance unbalance [%]: 3.0 Max.Characteristic impedance [Ω]: 100 ± 15 @ 1-100 MHzMutual capacitance [nF/100m]: 5.5 Max.Capacitance unbalance [pF/100m]: 340 Max. (pair to earth)
Note: All electrical characteristics are given at 20ºC
part number: AFC-5EUTP305M-BU-PR 4 PAIR CAT5e UTP CABLE BLUE 305M CARTON BULK
cross sectional drawing
PVC Sheath
Solid Polyethylene Insulation
Plain annealed copper conductor (24 AWG)
construction detailsConductor: Plain annealed copper – 24 AWG Insulation: PolyethyleneCore Identification Pair 1: White-Blue stripes/Blue Pair 2: White-Orange stripes/Orange Pair 3: White-Green stripes /Green Pair 4: White-Brown stripes /BrownOutersheath: PVC75°CSheath colour: Blue – Standard Grey – Alternative
4pair/0.57mm unshielded twisted pair (utp) category 6
cable description:Plainannealedcopperconductors,polyethyleneinsulated,twistedpair,flameretardantPVCoverallsheathed.100Ω balanced cable suitable for Local Area Network (LAN) for high-speed horizontal distribution network cabling (250 MHz). Suitable for 100 Mbps TPDDI, 622 Mbps ATM, 1000 Base T, IEEE 802.3 & IEEE 802.5, Gigabit Ethernet, broadband digital video, etc. Cable is UL listed.Note: Although performance is guaranteed to 250 MHz this cable is tested up to 1200 MHz, results are available on request
construction detailsConductor: Plain annealed copper – 23 AWG Insulation: Solid PolyethyleneCore Identification Pair 1: White-Blue stripes/Blue Pair 2: White-Orange stripes/Orange Pair 3: White-Green stripes /Green Pair 4: White-Brown stripes /BrownOutersheath: PVC75°CSheath colour: Grey – Standard Blue – Alternative
Frequency(MHz.)
attenuationMaX
(dB/100m)
Pr – PrneXt Min(dB/100m)
Power SuMneXt Min(dB/100m)
Pr– Pracr Min
(dB)
Power SuMacr Min
(dB)
Pr – PreLFeXt Min(dB/100m)
Power SuMeLFeXt Min(dB/100m)
returnLoSS Min(dB/100m)
1.0 2.1 74.3 72.3 72.2 70.2 67.8 64.8 —
4.0 3.8 65.3 63.3 61.4 59.4 55.8 52.8 23.0
10.0 6.0 59.3 57.3 53.3 51.3 47.8 44.8 25.0
16.0 7.6 56.2 54.2 48.6 46.6 43.7 40.7 25.0
20.0 8.5 54.8 52.8 46.3 44.3 41.8 38.7 25.0
31.25 10.7 51.9 49.9 41.1 39.1 37.9 34.9 23.6
62.5 15.5 47.4 45.4 31.9 29.9 31.9 28.9 21.5
100.0 19.9 44.3 42.3 24.4 22.4 27.8 24.8 20.1
125 22.5 42.8 40.8 20.4 18.4 25.9 22.9 19.4
155.52 25.3 41.4 39.4 16.1 14.1 24.0 21.0 18.8
175 27.1 40.7 38.7 13.6 11.6 22.9 19.9 18.4
200 29.1 39.8 37.8 10.6 8.6 21.8 18.8 18.0
250 33.0 38.3 36.3 5.3 3.3 19.8 16.8 17.3
dimensions and mass:Overall cable diameter (nominal): 6.2 mmMass (nominal): 40 kg/km
specifications: ISO/IEC 11801, Class E; AS/NZS 3080; AS/ACIF S008; TIA/EIA 568B; AS 1660.5.6 (Combustion propagation)
physical & mechanical characteristics:Minimum bending radius [mm]: 50Maximum pulling tension [N]: 190 Operating temperature range [ºC]: -20 to +60
part number: AFC-6UTP305M-GY-PR4PAIRCAT6UTPCABLEGREY305MCARTONBULK
categorY 6 utp caBle
electrical & transmission characteristics:DC resistance [Ω/100m]: 9.38 Max.Resistance unbalance [%]: 3 Max. Input impedance [Ω]: 100 @ 1-250 MHz Mutual capacitance [nF/100m]: 5.5 Max.Capacitance unbalance [pF/100m]: 330 Max. (pair to earth)Delay skew [ns/100m]: 45 @ 1-250 MHzPropagation delay [ns/100m]: 536 Max. @ 250 MHzLCL [dB]: 16 Min. @ 250 MHz Voltagecapability[V]: 110Power capacity [W]: 20 per pair
Note: All electrical characteristics are given at 20ºC
cross sectional drawing
copper utp caBle cu-3
PVC Sheath
Polyethylene Filler
Solid Polyethylene Insulation
Plain annealed copper conductor (23 AWG)
c o n t a c t d e t a i l s
aFc group pty ltdPhone: 1300 AFC GroupWeb: www.afcgroup.com.auEmail: [email protected]
melbourne93-97 Merrindale DriveCroydonVIC3136(03) 9737 [email protected]
sydneyUnit 40, 5 Inglewood PlaceBaulkham Hills NSW 2153(02) 9421 [email protected]
newcastleGround Floor, 2 Portside CrescentWickham, Newcastle NSW 2293(02) 4944 [email protected]
perthUnit 1, 32 Robinson AvenueBelmont WA 6104(08) 6253 [email protected]
BrisbaneUnit 6, 333 Queensport Road NorthMurarrie QLD 4172(07) 3292 [email protected]
dubai (aFc networks FZco)PO Box 262104JAFZ Dubai UAE+971(4) 883 [email protected]
Top Related