ON!TRACK ASSETMANAGEMENTStay working Stay productive Stay ON!Track
They are some of the biggest efficiency killers: missing assets. Broken tools. Assets that aren’t where they need to be. These problems slow you down—and cost you money. Staying efficient while managing hundreds or thousands of assets across multiple jobsites is an entire job in and of itself. And it’s another job that we want to make easier.
1-800-879-8000 • www.hilti.com 1-800-363-4458 • www.hilti.ca
WITH YOU FROM START TO FINISH — AND BEYONDWhen you’re ready for simplified asset management, we’re ready to help. We’ll help you analyze, plan, and implement ON!Track for your asset inventory, and we’ll be there for you whenever you need assistance with ongoing customer service and training.
Plan:We’ll help you:• Analyze your current process• Perform a cost and benefit analysis• Review requirements
Implement:We’ll help you:• Customize your solution• Tag and register your assets• Conduct initial training
Maintain:We’ll help you:• Stay productive with ongoing customer
service• Get the tools you need with a direct
sales team• Stay up to date with additional training
Description
Sales pack
quantitySPX Solid
item numberSP Solid
item numberSPX Sandwich item number
SP Sandwich item number
Tuck point blade 4.5” 6 pack 2151868 2151869 2151930 2151931
Tuck point blade 5” 6 pack 2151932 2151933 2151934 2151935
APPLICATIONS AND ADVANTAGES
SPX (Sandwich and solid blades) — The Ultimate diamond tuck point blade• Longest lifetime thanks to distinct bond
and diamond grit• Highest cutting speed• Universal use — designed for all mortar
grades and optimized for soft mortar
• Segments available in single (solid) and sandwich versions
SP (Sandwich and solid blades) — Premium diamond tuck point blade• High cutting speed thanks to U-Shaped
segments• Long lifetime and good value• Universal use — designed for all mortar
grades and optimized for hard mortar
• Segments available in single (solid) and sandwich versions
SEGMENT DIMENSIONS:
4.5” Diameter• Solid segment: SPX and SP 1.07” x .25” x .47” (L x W x H) • Sandwich segment: SPX and SP 1.14” x .28” x .39” (L x W x H)
5” Diameter• Solid segment: SPX and SP 1.09” x .25” x .47” (L x W x H) • Sandwich segment: SPX and SP 1.17” x .28”x .39” (L x W x H)
SPX Solid
SPX Sandwich
SP Solid
SP Sandwich
We built on the innovations in our other diamond blade portfolios to create the new family of Hilti SP and SPX Tuck Point blades. Designed for use on all mortar grades and available in solid and sandwich versions for 4.25” and 5” diameters, the SP and SPX offer high cutting speeds, long life in a wide range of applications and excellent value.
While both blades are designed for all mortar grades, the SP Tuck Point Blade is specifically optimized for hard-mortar applications.
When you need a blade optimized for soft-mortar applications, or when extended blade life and maximum cutting speeds are critical, step up to the SPX Tuck point blade. Manufactured using a unique method to position and bind the diamond grit on the blade, the SPX Tuck point blade provides superior performance and durability in most tuck pointing applications.
SP SPX
CUTTING EDGE TUCK POINT BLADES
Tuck point blade SP and SPX
Tool warranty. Some limitations apply. Contact Hilti for details.
we want to hear from you
How do you comply with ever-more stringent dust control regulations when a pressurized water source is hard to come by? You bring the Hilti integrated water pump DSH-P to the job.
Simply fill-up a bucket of water or use another static water source and attach a DSH-P integrated water pump system to your Hilti DSH 600-X, 700-X and 900-X to create a virtually dustless jobsite, wherever the jobsite may be.
EXTRAORDINARY INTEGRATED INNOVATION
Integrated water pump DSH-P
APPLICATIONS AND ADVANTAGES
Applications • For use with DSH 600-X, 700-X and
900-X hand-held gas saws• Unparalleled dust control portability for
DSH 600-X/700-X/900-X• Leverages the power of the gas saw
to produce pressurized water for a virtually dustless environment
• 10 ft. hose included
Technical data
Weight 2.8 lbs
Max Suction Lift 5 ft
Max Suction Pressure 87 PSI
Max Hose Length 30 ft: 10 ft hose included
Water Consumption .264 gal/min (dependent on valve)
Accessories
Description Item number
DSH-P + retrofit kit for DSH 700-X 3567534
DSH-P + retrofit kit for DSH 900-X 3567535
Description Package content Item number
DSH-P Water pump DSH-P Water pump, hose and saw connections, 10ft hose 2124505
DSH 600-X Saw + DSH-P + 1 SPX Blade 12” DSH 600-X, DSH-P, SPX 12” Blade 3563750
DSH 700-X Saw + DSH-P + retrofit kit + 1 SPX Blade DSH 700-X, DSH-P, SPX 14” Blade 3563753
DSH 900-X Saw + DSH-P + retrofit kit + 1 SPX Blade 16” DSH 900X, DSH-P, retrofit kit, SPX 16” Blade 3563754
Water pumpDSH-P
Made possible by more than four years of dedicated, non-stop innovation, the Hilti gas-powered DSH 600-X handheld saw builds on the legacies of our popular DSH 700-X and DSH 900-X.
Optimized for concrete, masonry and steel cutting, the DSH 600-X is reliable, easy to start and easy to maintain. The DSH 600-X features a 12” blade yielding nearly a 5” cutting depth with a diamond blade, versatile 180-degree cutting at any height, and innovative blade brake technology that stops the saw blade in under 10 seconds. This game changing gas saw offers superior performance, balance and jobsite safety while weighing in at only 20.8 pounds.
Pair the DSH 600-X with our innovative SPX Equidist 12” blade to experience incredible power and productivity.
EASY TO START, SAFETY, BALANCE
DSH 600-X Hand-held gas saw
APPLICATIONS AND ADVANTAGES
Advantages • Easy starting — unique auto choke system• Outcuts other saws — cuts to a depth of 4-15/16” with a
12” diamond blade• Fast blade stop — the blade stops in less than 10 seconds• Pre-tensioned belt, no belt maintenance by the user required• Cyclone filter — for maximum filter lifetime and consistent
high power• Easy maintenance — fast starter rope and filter replacement • Maximum cutting speed thanks to customized Hilti SPX
equidist blade • Reversible arbor flange fits all Hilti and other blades with 1”
and 20 mm arbor size
Applications• Masonry work: Cutting bricks and blocks to size• Metalwork: Cutting steel profiles, pipes and steel sheets• Laying paving: Cutting curbstones and paving slabs to size• Road construction: Perimeter cutting in asphalt and concrete• Floor construction: Cutting expansion joints in fresh concrete• Construction work: Cutting out openings in brick or concrete
walls• Cutting steel/rebar, steel profiles, pipes, and steel sheets
Technical dataCutting depth Up to 4-15/16 in Weight 20.8 lbsBlade size 12 in diameter discsFuel mixture 50:1 (2% oil) with >= 89 Octane fuel
with no more than 10% ethanolRPM 6200 Active vibration reduction YesFor wet and dry operation Yes
Accessories
Description Item number
Pump DSH-P 2124505Consumables kit DSH 600 2137756SPX 12” Diamond blade 2165227SP 12" Diamond blade 216545612” P Diamond blade 216981112” DS-SP Ductile diamond blade 22785312” AC-D General steel UP1 43672312” AC-D Duct. metal cutting blade UP1 43672612” AC-D Metal deck SP1 436714
Description Item number
DSH-600X 2136539DSH 600-X + DSH-P pump + 1 SPX 12” Diamond blade 3563750DSH 600-X + 1 SPX 12” Diamond blade 3563745DSH 600-X + 2 SP 12” Diamond blades 3563746DSH 600-X + 3 P 12” Diamond blades 3563747DSH 600-X + 1 DS-SP Ductile blade 3563748DSH 600-X + 10 AC-D MD Decking discs 3563743DSH 600-X + 10 AC-D UP Steel cutting discs 3563744
Tool warranty. Some limitations apply. Contact Hilti for details.
we want to hear from you
Make a clean sweep of dust collection in a variety of jobsite conditions with one of the most recent additions to our expanding selection of universal wet and dry vacuums: the Hilti universal vacuum cleaner VC 125-9 and VC 125-6.
Available in 9 gallon (VC 125-9) and 6 gallon (VC 125-6) capacities to meet your specific site mobility needs, the VC 125 family is ready to take on the toughest jobs with impressive 125 CFM power, Hilti 2 year wear-and-tear coverage (3 years with Hilti Fleet), and an easy manual filter cleaning technology to keep you in the clear.
THE POWERFUL NEW LEADER IN DUST COLLECTION
VC 125-9 and VC 125-6 Universal vacuum cleaners
APPLICATIONS AND ADVANTAGES
Applications• Dust extraction from grinding, cutting,
slitting, drilling and dry coring tools• Removal of slurry during wet coring
applications• Cleaning wet and dry
Advantages• 125 CFM level to comply with several
OSHA Table 1 silica dust regulations • Can be paired with a variety of power
tools to reduce dust exposure• 99% filter efficiency• HEPA ready vacuum• Universal, robustly constructed vacuum
cleaner, ideal for use with most Hilti tools.
• Robust wheels and accessories to withstand the harshest jobsite conditions
• Easy handling when emptying the tank and changing filters
• Easy manual filter cleaning button to allow cleaning when it is necessary
Technical data
CFM 125
Capacity 9 and 6 Gal
Hose length 16 ft
Amperage 9 A
Description Item number
VC 125-9 Universal vacuum 2167149
VC 125-6 Universal vacuum 2167148
Accessories
Description Item number
Filter VC 125/150 dry 2121386
Filter VC 125/150 universal wet / dry 2121387
High performance filter VC 125/150 436058
HEPA filter VC 125/150 203879
Universal fleece bag VC 125-6 (5 pk) 2177882
Universal fleece bag VC 125-9 (5 pk) 2177883
Suction hose 36x4m accessory 203867
VC 125-9
VC 125-6
Tool warranty. Some limitations apply. Contact Hilti for details.
Using Hilti’s powerful AirBoost technology to deliver an impressive 150 CFM of air flow, the Hilti universal vacuum cleaner VC 150-10 X and VC 150-6 X are among the latest additions to Hilti’s line of universal wet and dry vacuums, expanded to meet the growing dust removal needs of industry professionals.
The new VC 150-10 XE and VC 150-6 XE feature a handy 110v/11A power outlet built right into the vacuum — perfect for powering a corded Hilti tool.
Automatic filter cleaning, availability in 10-gallon (VC 150-10 X and VC 150-10 XE) and 6-gallon (VC 150-6 X and VC 150-6 XE) capacities, a field-tested tough casing and Hilti 2-year wear-and-tear coverage (3 years with Hilti Fleet) make the VC 150 family an excellent choice where mobility, durability dependability and power are absolute necessities.
VC 150-6 X and VC 150-10 X VC 150-6 XE and VC 150-10XE
GIVE YOUR DUST COLLECTION STRATEGY A BOOST
VC 150-10 X, VC 150-6 X, VC 150-6 XE and VC 150-10 XE Universal vacuum cleaners
APPLICATIONS AND ADVANTAGES
Applications• Dust extraction from grinding, cutting,
slitting, drilling and dry coring tools• Removal of slurry during wet coring
applications• Cleaning wet and dry
Advantages• 150 CFM level to comply with most
OSHA Table 1 silica dust regulations • Versatile, robustly constructed vacuum
cleaner, ideal for use with all Hilti tools• Hilti AirBoost filter cleaning technology
for consistently high suction performance
• Suction hose placement in the head provides high extraction volume and compact design
• Robust housing, wheels and accessories to withstand the harshest jobsite conditions
• Upgradeable with accessories to simplify transportation and carriage of toolboxes, tools and accessories
• Filter cleaning can be switched off to reduce noise and increase water capacity
• Easy handling when emptying the tank and changing filters
• Large wheels allow optimum on-site mobility
Technical data
CFM 153
Capacity 10 and 6 Gal
Hose length 16 ft
Amperage X Line 9 A
Amperage XE Line 20 A with 11 A tool attached
Accessories
Description Item number
Dust bag plastic VC 20/150-6 203854
Dust bag plastic VC 40/150-10 203852
Universal fleece bag VC 150-6 2121560
Universal fleece bag VC 150-10 2121562
High performance filter VC 125/150 436058
HEPA Filter VC 125/150 203879
Filter VC 125/150 universal wet / dry 2121387
Filter VC 125/150 dry 2121386
Description Item number
VC 150-10 X Universal vacuum 2167147
150-10 XE Universal vacuum 3563661
VC 150-6 X Universal vacuum 2167146
VC 150-6 XE Universal vacuum 3563660
VC 150-10 XVC 150-6 X
VC 150-6 XE VC 150-10XE
Tool warranty. Some limitations apply. Contact Hilti for details.
we want to hear from you
When you’ve got a big mess, the Hilti universal vacuum cleaner VC 300-17 X picks up where all the others leave off. Built with an impressive 300 CFM of power delivered by two turbines and protected by a tough, field-tested casing, this universal wet and dry vacuum has an automatic filter cleaning system and can pack in a whopping 17 gallons of debris.
It’s the latest and most powerful addition to Hilti’s impressive selection of universal vacuum cleaner solutions. It is built to satisfy industry demands for more capable dust removal solutions and is backed by Hilti 2-year wear and tear coverage (3 years with Hilti Fleet), the VC 300-17 X is built to tackle the most demanding jobs under the toughest conditions.
AT 300CFM, JOBSITE DUST DOESN’T STAND A CHANCE
VC 300-17 X Universal vacuum cleaner
APPLICATIONS AND ADVANTAGES
Applications• Two turbines and power filter cleaning
technology for consistent, extremely high suction performance
• Removing slurry produced by wet coring and sawing
• Removing dust produced by drilling, slitting, grinding, cutting and demolition
• Wet and dry dust extraction
Advantages• OSHA 1926.1153 Table 1 compliant with
DCH 300 cutters* and all Hilti tools • Transport handle, sturdy trolley and
large wheels allow optimum site mobility
• Tank concept for easy slurry or dust removal
• Maximum total dust load• Water level sensors and floats help
protect the turbine from flooding• Mobility thanks to large wheels and
trolley• Easy filter exchange
Technical data
CFM 314
Capacity 17 Gal
Hose length 16 ft
Amperage 17.5 A
Accessories
Description Item number
Filter VC 300 universal 2177885
Universal Fleece Bag VC 300 2177884
Suction hose 36x5m accessory 203866
Dust bag VC 300 (10) plastic* 2177881
Paper bag VC 300 203860
* Items will be available fall 2017
Description Item number
VC 300-X Universal vacuum 3563662
VC 300-X + DCH 300 package 3564393
VC 300-X + DCH 230 package 3564392
* Hilti interprets the DCH as Table 1 (xii) “hand-held grinder”
The new Hilti laser range meter PD-CS is packed with all of the convenient features that make life on the jobsite easier. Its integrated laser module captures and saves measurement data directly onto photographs taken by its internal digital camera, making old time-consuming methods that relied on multiple devices — including pencil and paper — things of the past.
Using the PD-CS you can digitize the entire measurement process; measuring distances, adding context to data with pictures and/or text, and sharing that all of that information in a single report via BT, Wi-Fi and Micro USB with just one, powerful but easy-to-use tool.
A SMARTER WAY TO MEASURE
Laser range meter PD-CS
APPLICATIONS AND ADVANTAGES
MeasureLocating a target outdoors or at a further distance has never been as easy. The PD-CS is equiped with a digital camera with zoom making locating your target easier, in any lighting. • Easy to use, with an interface based on Android
technology• Take direct and indirect measurements and calculate
area and volume easily thanks to context sensitive help
DocumentAbility to add information to your measurements• For even greater documentation, include notes and
additional pictures with your measurements. Ability to give measurements a name and store in project folders
ShareStop losing time and data• Share your data easily in PDF or CSV format that can
be transferred by USB, Bluetooth or Wifi• Photos with measurements can be exported as image
files (.jpg). The 8GB memory allows you to save more than 6,000 documented measurements, with images and notes
Technical data
Image camera 2x 5 MP image cameras for outdoor targeting and documenting
Memory 8 GB Memory stores over 6000 measurements with pictures
Export documentation Spreadsheet or PDF
Transfer to PC USB, Bluetooth or Wi-Fi
Measuring range 0 – 200m / 656 ft with accuracy +/- 1mm
Battery Integrated Li-ion
Battery life 10h
Screen Color touch screen, usable even with work gloves
IP protection class IP 54
Description Item number
Laser range meter PD-CS 2102498
Accessories
Description Item number
Measuring extension PDA 72 2062052
Target plate PDA 52 226879
Tool warranty. Some limitations apply. Contact Hilti for details.
we want to hear from you
When you’re on a tough jobsite and accuracy is critical, you can count on the Hilti green rotating laser PR 3-HVSG. Shining four times brighter than conventional red lasers, the PR 3-HVSG gives you significantly better visibility over longer distances, and can be used in vertical or horizontal orientation.
Packed with the functions you need, like Hilti Pulse Power Technology for highly reliable readings under bright light conditions, a best-in-class leveling time, durability, dependability and ease-of-use, the PR 3-HVSG is ideal for all leveling and aligning applications.
THE POWER OF GREEN IN ATOUGH SHELL
Green rotating laser PR 3-HVSG
APPLICATIONS AND ADVANTAGES
• Transferring reference heights• Leveling suspended ceiling• Position drywall track and wall
partitioning• Installation of pipes an cable trays• Green laser provides up to four
times better visibility and a finer, more accurate line compared to a conventional red beam
• 12V battery charges in 30 minutes• Best in class leveling time (6-8s)• Reinforced head, shock absorbing
handles, improved internal damping system and unique robust internal design allow for drop-resistance from standard working height (3 ft/1 m) while maintaining its accuracy
• No-Cost Coverage for 2 years with Hilti Lifetime Service
Technical dataAccuracy (at 75°F / 24°C) ± 1/16 inch at 33 ft (± 1 mm at 10 m)Operating range with laser receiverOperating range of IR-Remote
Diameter: 7 ft – 492 ft (2 – 150 m)Distance: up to 100 ft (30 m)
Battery Life at 73°F (23°C) Li-Ion rechargeable (tool): > 16 hoursLaser class (green visible beam) Class 2, 510-530 nm , < 4.85 mWIP protection IP 64 (IEC 529)Operating temperature 14°F to 122°F (-10°C to 50°C)
Description Package content Item number
Green rotating laser kit PR 3-HVSG
Includes tool, IR-remote, green target plate, 12 V Li-Ion battery, charger and operating instructions in an impact resistant plastic case
3528945
PR 3-HVSG with wall mount & receiver
Includes PR 3-HVSG Rotator, Battery, Charger, PRA 72 Wall mount and PRA 20G Laser receiver 3542821
Green rotating laser kit PR 3-HVSG with Wall mount bracket PRA 72
Includes 3x lasers with its components and 3x Wall mount bracket PRA 72 3528947
AccessoriesDescription Item number
Wall mount bracket PRA 72 2088509
Green laser receiver PRA 20G 2106072
B12 2.6Ah Li-ion battery 2077977
C4/12-50 Charger for B12 batteries 2076996
Target plate (green) PRA 54 226976
IR Remote Control PRA 2 331418
Crank tripod PUA 32 233904
Laser Warning Class 2 (5-pack) 3528370
ADVANCEMENT IN BATTERY TECHNOLOGY
B22/3.0 Advanced compact battery
Hilti’s advanced compact battery B22/3.0 ushers in a new class of Li-Ion batteries. Comparable in application performance to an industrial-class battery, the B22/3.0 offers a dramatic reduction in weight. This adds up to superior tool usability and reduced user fatigue in a broad range of applications. The B22/3.0 is the only compact battery that can be used with every 22V Hilti cordless tool.
This revolutionary new battery is backed by our industry-leading 20-2-1 warranty, fully-sealed for protection against dust, humidity and water. It is drop resistant and built to stand up to the the wear and tear of everyday use in commercial applications.
APPLICATIONS AND ADVANTAGES
• The first compact high-performance battery for all Hilti 22V tools
• The latest CPC technology allows higher charging accuracy for longer runtime and intelligently monitors each cell for improved performance
• Fully sealed electronics for increased protection against dust, humidity and water
• The rubberized, glass-fiber reinforced casing is up to 4 times more robust and resistant to damage from dropping and twice as resistant to temperature than standard ABS plastic
• The battery system is designed to absorb drop impacts, even with the additional weight of the tool body
• Industry-leading warranty providing up to 2 year wear and tear coverage with battery replacement
• Easy-to-read state-of-charge monitoring system with 4 LEDs
Technical data
Application temperature range -4 – 140 °F (-20 – 40 °C)
Dimensions (LxWxH) 5.3 x 3.7 x 2.4 in
Battery type Li-Ion
Voltage 21.6 v
Weight 1.3 lbs
Description Item number
B22/3.0 CPC Li-Ion advanced compact battery 2136425
Tool warranty. Some limitations apply. Contact Hilti for details.
we want to hear from you
APPLICATIONS AND ADVANTAGES
• LED panel provides a light output of 500 lumens while staying cool to the touch
• Natural white light clearly illuminates dark work areas with high color accuracy
• Up to 3 working days of light on a single battery charge
• 3-mode switch for reduced brightness in confined spaces
• Retractable hook for hands-free lighting stows safely inside the lamp body when not in use
• Adjustable LED panel rotates 360 degrees and pivots vertically to provide directional light in a variety of applications
• Illumination of unlit and poorly lit work areas
• Inspection of painted and other finished surfaces
Technical data
Application temperature range -4 – 140 °F (-20 – 40 °C)
Dimensions (LxH) 7.5 x 7.7 in
Battery type Li-Ion
Voltage 21.6 v
Weight 1.1 lbs
Description Item number
SL 2-A22 Task light 2163836
The versatile new Hilti task light SL 2-A22 packs a whole lot of illumination into a very small package. Put it on the ground, hang it by its integrated hook, or hold it in a free hand to put the light just where you need it to get the job done.
The fully-adjustable LED panel rotates a full 360 degrees and pivots so you can put 500 lumens of color-accurate white natural light exactly where you need it. It stays cool to the touch. A 3-position switch lets you select the right amount of light for the job, and a battery that lasts up to 3 full days on a single charge gives you time to get the job done.
The SL 2-A22 is ideal for lighting up dark work areas, inspecting paint and other surface finishes and many other applications. It’s backed by Hilti’s 20-2-1 year warranty against the wear and tear of everyday commercial use, so you can be sure it will be ready to go to work when you are.
SHINE THELIGHT ONPRODUCTIVITY
SL 2-A22 Task light
APPLICATIONS AND ADVANTAGES
• Drilling electrical through penetrations• Chipping concrete for plumbing• drains• Drilling for concrete application sets• Drilling hundreds of holes, one after
another for kicker plates• Battery, motor and transmission
designed for unmatched speed drilling into concrete
• Chips like a corded tool two classes larger
• Optimized electropneumatic hammering mechanism for more speed and impact energy
• B36/5.2 AH battery delivers outstanding performance for the extreme user
• Brushless motor delivers long life and high efficiency
• Glass fiber housing and hammering mechanism optimized to provide cooling for long life
• Hammering mechanism, gear and motor produce better heat conductibility for more cool
Technical dataVoltage 36 VAmp hours 5.2 AhSpeed no load 850 rpmFull hammering frequency 4500 blows/minSingle impact energy 2.7 ft.lbsChiseling function YesDimensions (L x W x H) 16.5 x 4.4 x 8.6 inWeight 11.2 lb
With a motor, transmission and battery designed from the ground up for unmatched speeds in drilling and chipping concrete, the Hilti TE 30-A36 cordless combihammer packs plenty of punch to get the job done.
Now the world’s first cordless combihammer is even better, because that knockout power is delivered by our lighter-weight B36/5.2 CPC battery pack platform, compatible with other workhorse Hilti tools like the AG 600-A36 angle grinder and TE 6-A36 rotary hammer.
Delivering the ultimate in drilling performance with outstanding versatility and enhanced compatibility, the Hilti TE 30-A36 cordless combihammer puts all the power you need right in your hands.
POWERFUL, VERSATILE AND COMPATIBLE
Cordless combihammer TE 30-A36
Description Package content Item number
TE 30-A36 Cordlesscombihammer
Includes TE 30-A36 tool body, 2x B36/5.2 CPC Li-Ion batteries, 1x C 4/36 350 watt high speed charger, 1x each of TE CX: 1/4” x 6”, 3/8” x 6”, 1/2” x 6”, 5/8” x 8”, 3/4”-12”, 1”-18”, TE-CP SPM 6/25 wide flat chisel and plastic case
3567671
AccessoriesDescription Item number
Battery pack B 36/5.2 2098470 TE-CP-SPMK 6/18 Wide-flat offset chisel/scraper 282308 TE-CP SM 25 Pointed chisel 282299 TE-C FGM 25 Joint chisel 204741 TE-C KM 2/25 Channel chisel 030221 TE-C BSPM Flexible chisel 2133864 TE-C GB 32/45 x 1-1/4" Bell-shaped bit 220630 TE-C-BK TW 3" Percussion core bit 028896 TE-CX 1"-18" Hammer drill bit 421980 TE-CX 3/4"-18" Hammer drill bit 426825 TE-CX 5/8"-18" Hammer drill bit 435020 TE-CX 1/2"-18" Hammer drill bit 435014 TE-CX 3/8"-12" Hammer drill bit 435007 TE-CX 1/4"-6" Hammer drill bit 435000
Tool warranty. Some limitations apply. Contact Hilti for details.
we want to hear from you
APPLICATIONS AND ADVANTAGES
Advantages• Unique ATC (Active Torque Control)
system stops the motor almost instantly if the bit binds and the housing begins to rotate too quickly
• High performance-to-weight ratio• Detachable supply cord allows for
quick replacement• Improved performance in large-
diameter coring applications• AVR (Active Vibration Reduction)
for maximum comfort and higher productivity
• 1926.1153 Table 1 compliant when used with either TE DRS-Y or TE-YD hollow drill bit and a Hilti vacuum
Applications • Drilling anchor through-holes in
concrete and masonry• Medium-duty demolition work• Coring in masonry and concrete up
to 4”• Chiseling out penetrations
Technical data
Amperage 13A
Impact energy 5.8 ft-lbs
Weight TE 60-AVR: 15 lbs TE 60-ATC/AVR: 17.2 lbs
Triaxial vibration value TE 60-AVR: 9 m/s2 TE 60-ATC/AVR: 6 m/s2
Impacts per minute 3300 impacts per minute
Optimum hole diameter range (hammerdrilling) 11/16” to 1-9/16”
Maximum hole diameter (hammerdrilling) 2”
Maximum hole diameter (percussion core bits) up to 4”
Connection end SDS-max
Accessories
Description Item number
TE detachable supply cord 2127087
TE DRS-Y (dust shroud) 2055718
Depth gauge 2173276
Description Package content Item number
TE 60-AVR performance package Includes tool with 2 supply cords, 7/8 x 13 drill bit, and pointed chisel 3564151
TE 60-AVR DRS package Includes performance package with TE DRS-Y shroud and a VC 150-6X 3564155
TE 60-ATC/AVR performance package Includes tool with 2 supply cords, 7/8 x 13 drill bit, and pointed chisel 3564152
TE 60-ATC/AVR DRS package Includes performance package with TE DRS-Y shroud and a VC 150-6X 3564156
NEW FEATURESSMARTER TOOLS
SDS-max combihammers TE 60-AVR and TE 60-ATC/AVR
We’ve enhanced the Hilti SDS-max combihammers TE 60-AVR and TE 60-ATC/AVR by building in more features, significantly upgraded performance and more product intelligence than ever before. For you, that adds up to more runtime and less downtime.
You’ll get more work done with innovative and exclusive features like Active Vibration Reduction (AVR) to improve operator comfort, Active Torque Control (ATC) to help protect the operator from kickback if the bit gets stuck, and even a detachable power cord, which you can replace right at the jobsite if needed, to get back up and running.
Our new TE 60s are the first class of Hilti SDS-max combihammers to feature the Hilti Connect app, which lets you use any NFC-enabled device to do everything from getting a comprehensive tool history and summary to sending in a request for a repair from the jobsite.
TE 60-AVR TE 60-ATC/AVR
TE 60-AVR
TE 60-ATC/AVR
Tool warranty. Some limitations apply. Contact Hilti for details.
Hilti SP and SPX with Equidist floor saw blades offer two outstanding performance levels in diamond cutting blades for walk-behind floor sawing.
When you choose the SP, you get best-in-class cutting speeds and consistent performance over the entire life of the blade. For the most demanding applications, step up to the SPX with Equidist. Precision-manufactured and engineered for maximum cutting speeds, this blade offers extreme versatility and extended blade life.
Our innovative new blades are available in a full range of diameters from 14” to 30” to fit your needs.
SP SPX
CHOOSING THE RIGHT FLOOR SAW BLADE HAS NEVER BEEN EASIER
Floor saw blades SPX with Equidist SP
APPLICATIONS AND ADVANTAGES
SP and Equidist SPX floor saw blades cut slabs, openings for concrete repair, and can be used to cut and renovate old concrete
Unmatched speedConsistent and maximum number of diamonds in contact with the base material to ensure that you always cut at the top speed, all day, every day
Unmatched lifeWe strategically position every individual diamond for maximum performance, resulting in an unparalleled lifetime
Unmatched versatilityThe highest quality diamonds, optimized positioning, coupled with our undercut protection allows SPX blades to outperform in a wider range of base materials including concrete, asphalt, and asphalt over concrete and saw horse power levels without compromising performance
SPXBest performance in every way.
SPBetter performance at great value.
BladeDiameter
SPValue
<18 HP
SPXVersatility
< 30 HP
Trial Pack*< 30 HP
SPValue
20-70 HP
SPXVersatility31-70 HP
Trial Pack> 30 HP
14" 2159881 3553264 3552937 2177802 - 3566844**
16" 2159882 3553265 3552938 2177803 - 3566845**
18" 2159883 3553266 3552939 2177804 3559600 3566846*
20" 2159884 3553267 3552940 2177805 3559601 3566847*
24" 2159885 3553268 3552941 2177806 3559602 3566848*
26" - - - - 3559783 -
30" - - - - 3559784 -
HP Horse Power * Includes 1 SPX and 1 SP floor saw blade ** Includes 2 SP blades
Undercut protection offers best versatility when cutting concrete, asphalt, or asphalt over concrete
we want to hear from you
Description
Sales pack
quantity Item number
X-CX ALH22 100 2149736
X-CX ALH27 100 2149737
X-CX ALH32 100 2149738
X-CX ALH22 12GA 4FT 100 2149814
X-CX ALH22 12GA 6FT 100 2149815
X-CX ALH22 12GA 8FT 100 2149816
X-CX ALH22 12GA 10FT 100 2149817
X-CX ALH22 12GA 12FT 100 2149818
X-CX ALH27 12GA 4FT 100 2149819
X-CX ALH27 12GA 6FT 100 2149820
X-CX ALH27 12GA 8FT 100 2149821
X-CX ALH27 12GA 10FT 100 2149822
X-CX ALH27 12GA 12FT 100 2149823
X-CX ALH32 12GA 4FT 100 2149824
X-CX ALH32 12GA 6FT 100 2149825
X-CX ALH32 12GA 8FT 100 2149826
X-CX ALH32 12GA 10FT 100 2149827
X-CX ALH32 12GA 12FT 100 2149828
Accessories
Description Item number
DX 351-CT 3442190
DX 351 373103
DX 351 pole tool 333310
DX 5 2142307
DX 5 pole tool 2150264
DX 2 2084262
DX 2 pole tool 3531511
We created the Hilti X-CX ceiling clip assembly to tackle one of the most demanding applications for powder-actuated fasteners: fastening to concrete to suspend ceiling grid and light fixtures.
A new clip that reduces concrete spall while properly aligning the nail head, coupled with a new nail that penetrates even in the toughest conditions, the Hilti X-CX ceiling clip assembly offers better penetration, improved bending resistance and is suitable for use with a wide range of Hilti fastening tools.
CEILING APPLICATIONS DEMAND BETTER FASTENERS
X-CX ALH Ceiling Clips
APPLICATIONS AND ADVANTAGES
Applications • Suspending ceilings from concrete
and concrete over metal deck using 8, 9 or 12-gauge ceiling wire hangers
• Fastening and suspending light-duty electrical and mechanical services
Advantages• Preassembled ceiling clip with Class 1
wire and nail• Nail with long conical tip for better
penetration in hard concrete• Dome design for improved guidance
while driving the nail• Larger-diameter nail for improved
bending resistance• Suitable for use with a wide range of
Hilti fastening tools
Technical data
Base materials Concrete, concrete over metal deck, hard concrete
Fastener lengths 22 mm (7/8”), 27 mm (1”), 32 mm (1-1/4”)
Fastener shank diameter 4.5 mm (.177 in)
Point tip Long conical
ALWAYS READY TO STAY AHEAD
Powder-actuated tool DX 5
Meet the next generation of better, smarter, powder-actuated tools. Hilti’s powder-actuated tool DX 5 extends Hilti’s DX technology with the exciting new DX 5 Smartool feature that works with the Hilti Connect App to make tool care and management easier and more intuitive than ever before.
DX 5-F8 DX 5-MX DX 5 Kit DX 5-IE
DX 5-F10 DX 5-SM DX 5-GR
APPLICATIONS AND ADVANTAGES
• Fastenings on high strength steel and concrete base materials
• Ideal for fastening 2x4 wood, plywood and drywall track
• Insulation board, waterproofing membrane and grating applications
• Fastening point tracking for preventative maintenance planning
• Bluetooth connectivity to Hilti Connect App allows easy access to data and info anytime, anywhere
Description Item number
Powder-actuated tool DX 5-F8 2142307
Powder-actuated tool DX 5-MX 2142651
Powder-actuated tool DX 5 Kit 2142655
Powder-actuated tool DX 5-IE 2142659
Powder-actuated tool DX 5-F10 2142665
Powder-actuated tool DX 5-SM 2142666
Powder-actuated tool DX 5-GR 2142662
Accessories
Description Item number
Receptacle X-PT 5 2150263
Pole tool X-PT 5 7ft 2150264
Cleaning kit 372810
Piston accessory kit (F8 and MX) 2092078
Compact tool case 2145461
Tool warranty. Some limitations apply. Contact Hilti for details.
we want to hear from you
As a leader in Firestop Cast-in devices, Hilti continues to bring innovation to the industry with the first and only 8” and 10” Firestop Cast-in devices. The Hilti CFS-CID 8” and 10” Firestop Cast-in devices are the only cast-in devices on the market that allow for use with 8” and 10” pipes for water drainage and large pipe applications. Whether you are running 8” PVC, metal pipes, metal pipes with insulation or 10” metal pipes, use these labor saving cast-in device for your application needs.
The new CFS-CID 8” and 10” Firestop Cast-in devices require only one laborer to install versus two laborers with traditional methods. With multiple application uses and a safe and time saving installation process, the Hilti CFS-CID 8” and 10” Firestop Cast-in devices are the cast-in solutions you have been waiting for.
CFS CID 8” & 10” M CFS CID 8” P
FIRESTOPCAST-INDEVICE
CFS CID 8” & 10” M CFS CID 8” P
APPLICATIONS AND ADVANTAGES
Advantages• One-step firestop solution for 8” and
10” pipes-no additional sealing required• Ready to use straight out of the
package• Increased productivity helps reduce
labor costs• Quick and simple installation• Reduces the chance of project delays
due to failed inspections• No expiration date (no shelf life)
Applications • New building construction
(flat concrete)• For use with PVC, metal and
metal with insulation• Available in 6”, 8”, 10”, 12”, 14” heights
Technical data
Application Temp min-max -40 to 120F
Base material Concrete
Intumescent Yes
Mold and mildew performance Class 0 (ATM G21-96)
Storage Temp min-max -40 to 120F
W rating Yes, with sealant
DescriptionSales pack
quantity
6” height Item
number
8” height Item
number
10” height Item
number
12” height Item
number
14” height Item
number
FS cast-in device CFS-CID P 8” 1 pc 2155563 2155564 2155565 2155566 2163201
FS cast-in device CFS-CID M 8” 1 pc 2163202 2163203 2163204 2163205 2163206
FS cast-in device CFS-CID P 10” 1 pc 2163207 2163208 2163209 2163210 2163211
FS cast-in device CFS-CID M 10” 1 pc 2163212 2163213 2163214 2163215 2163216
P = Plastic pipes and metal pipes with insulationM =Metallic pipes
INNOVATION AT YOUR FINGERTIPSAnytime. Anywhere.
Whatever your trade, whatever the job, you probably rely on an array of digital devices — from personal computers to smart phones — to deliver inspiration and information wherever and whenever you need them.
Hilti’s broad portfolio of application-specific online catalogs for trades including civil, building construction, electrical, interior finishing, mechanical, oil & gas, power, steel metal and industrial & commercial make it easier than ever for you to connect to the ideas and products you need to get the job done.
To get started, visit:
• Civil
• Building Construction
• Electrical
• Interior Finishing
• Mechanical
• Oil & Gas
• Power
• Steel Metal
• Industrial and Commercial
1-800-879-8000 • www.hilti.com 1-800-363-4458 • www.hilti.ca
we want to hear from you
Game changing solutions that maximize jobsite productivity. Installing drywall track is a fixed cost on a project. Hilti’s Total Track Solution is a pre-formed solution that seals drywall joints at the same time you install your track. No need to come back and address the joint area with sealant or other methods.
Simply saddle your track with TTS, install track and done. No mess, zero waste.
Firestop track seal CFS-TTS and new Smoke & accoustic track seal CS-TTS SA is availabe in 3-5/8” and OS which is a flexible solution for any track size.
GET YOUR JOB ON THE RIGHT TRACK WITH TOTAL TRACK SOLUTIONS
Firestop track seal CFS-TTS Smoke & acoustic track seal CS-TTS SA
Technical data CFS-TTS CS-TTS SA
Chemical basis Polyurethane foam Polyurethane foam
Color Silver/Red Light grey
Application temperature range 23° to 104°F 23° to 104°F
Storage and transportation temperature range
14° to 104°F 14° to 104°F
Mold and mildew performance Class 0 (ASTM G21-96) andClass 0 (EN ISO 846)
Class 0 (ASTM G21-96) andClass 0 (EN ISO 846)
Tested in accordance with ASTM E 90, ASTM G21, UL 2079, ASTM E 1966, ASTM E84/UL 723, ULC 115, CAN/ULC-S102
ASTM E 90, ASTM G21, CAN/ULC-S102, UL 2079 (L-Rating), UL 723, ASTM E84/UL 723
California state fire marshal approval
Yes -
LEED VOC 0.18 lb/gal (US) .20 lb/gal
Acoustics performance Test report available Test report available
TOTAL TRACK SOLUTIONS
Features • Fast installation — fewer working steps (once and done)• Excellent sealing properties designed for reliability under
real jobsite conditions (STC and smoke seal on imperfect concrete)
• Firestop Track Seal CFS-TTS is tested in accordance with UL 2079 5th edition
• No mess, zero waste — no caulking or tools required• Simple — ideal shape designed to saddle over top track
without additional folding, taping or gluing• Versatile solution for any track size under real jobsite
conditions
Applications• Firestop, smoke and sound seal for head-of-wall joints
between top track and gypsum to flat concrete slabs• Suitable for wall-to-wall (WtW) or bottom-of-wall (BoW)
application of drywall system• Designed for a perfect friction fit with common track sizes —
3-5/8” and 6”• OS is designed for a flexible solution for various track
applications• Smoke and sound seal for head-of-wall joints between top
track and gypsum to flat concrete slabs
Firestop track seal CFS-TTS Smoke & acoustic track seal CS-TTS SA
Firestop track seal CFS-TTS Smoke & acoustic track seal CS-TTS SA
Technical data CFS-TTS CS-TTS SA
Chemical basis Polyurethane foam Polyurethane foam
Color Silver/Red Light grey
Application temperature range 23° to 104°F 23° to 104°F
Storage and transportation temperature range
14° to 104°F 14° to 104°F
Mold and mildew performance Class 0 (ASTM G21-96) andClass 0 (EN ISO 846)
Class 0 (ASTM G21-96) andClass 0 (EN ISO 846)
Tested in accordance with ASTM E 90, ASTM G21, UL 2079, ASTM E 1966, ASTM E84/UL 723, ULC 115, CAN/ULC-S102
ASTM E 90, ASTM G21, CAN/ULC-S102, UL 2079 (L-Rating), UL 723, ASTM E84/UL 723
California state fire marshal approval
Yes -
LEED VOC 0.18 lb/gal (US) .20 lb/gal
Acoustics performance Test report available Test report available
Description Item number
Smoke & acoustic track seal CS-TTS 358 2173979
Smoke & acoustic track seal CS-TTS OS 2174120
Smoke & acoustic track seal CS-TTS 600 2174121
Description Item number
Firestop track seal CFS-TTS 358 2128716
Firestop track seal CFS-TTS OS 2128714
Firestop track seal CFS-TTS 600 2128717
Firestop track seal CFS-TTS
Firestop track seal CFS-TTS
Smoke & acoustic track seal CS-TTS SA
Smoke & acoustic track seal CS-TTS SA
we want to hear from you
A modular support system has to provide great versatility during installation as well as high performance in the final structure. The new MIQ heavy-duty system combines these features perfectly — rigid girders, easy-to-install connectors and seamless connection of MQ parts for endless installation possibilities.
Developed for maximum versatility without compromising performance, MIQ is our latest installation innovation.
HOLDS UP EVERYTHING BUT YOUR SCHEDULE
MIQ channel system
APPLICATIONS AND ADVANTAGES
Applications • Cable tray supports• Electrical and Instrumentation stands• Overhead grids• 3-D frames• Pipe supports
Advantages• One system for medium and heavy-
duty applications• High flexibility thanks to integrated MQ
profile• Hot-dip galvanized for longer life in
corrosive environments Flexible assembly
The wide range of connectors available makes it easy to find those that fit the needs of your application perfectly. Heavy or light, both quick and easy
MQ compatibility
Thanks to the strut profile on two sides of the girder, parts can be fitted extremely easily, including brackets, supports and various connectors.
When we used cutting-edge technology including Finite Element Analysis to design the Hilti high-strength modular support system MI specifically for our North American customers, we had one thing in mind: increased load capacity.
Complete your designs with confidence using higher and more comprehensive load-capacity data. The increased strength of the MI next generation reduces the need for bracing and increases spans; resulting in faster installation, streamlined planning and enhanced installation flexibility.
DESIGNED FORSTRENGTH
MI next Generation
APPLICATIONS AND ADVANTAGES
• Upgraded concrete and steel baseplates and concrete brackets
• Introducing high strength brackets to steel for fast and easy installation
• New innovative connectors that are compact and highly versatile
• Now available on PROFIS Installation and updated in BIM library
Tool warranty. Some limitations apply. Contact Hilti for details.
we want to hear from you
FAST, FLEXIBLE AND INNOVATIVE ROOFTOP SUPPORT SYSTEM
Load distribution plates MV-LDP and MI-LDP
Hilti MV-LDP and MI-LDP load distribution plates are ideal for supporting pipe, ventilation duct, HVAC equipment, cable trays and many other mechanical and electrical installations. Available for both MQ channel systems and higher load MI girder systems, these supports are designed to minimize point loading and to reduce the possibility of damage to the roof membrane.
These supports feature high load capacity which means fewer plates are needed to get the job done, resulting in less material and labor costs. Combine the MV-LDP with other innovative features like the MQN push button and contractors will save time and labor costs with this fast and easy to install solution.
APPLICATIONS AND ADVANTAGES
• Installation of air conditioning units, walkways, ventilation ducts, pipework or cable trays on flat roofs
• MQ channels can be easily attached to the fitting using the MQN push button or MQM wing nut
• MI girders can be easily attached to the load distribution plate using the uplift resist pipe saddle connector (sold separately)
• For flat and low-pitched roofs• Up to 7° adjustment for compensation
of roof pitch• Rotatable through 360° to allow fast,
easy installation of MQ channels• Pivoting joint allows equal load
distribution on the base surface
Description Item number
MV-LDP load distribution plates for MQ 2048106
MI-LDP load distribution plates for MI (available through special order) 2153636
Uplift resist pipe saddle connector (for use with MI; sold separately) 3533477
Accessories
Description Item number
Protective separation fleece (for use with MI and MQ) 2050264
Hilti injectable mortar HIT-ICE is the extreme-cold weather solution for adhesive anchoring in cracked, uncracked and grout-filled masonry. Its unique formulation provides consistent fastenings in temperatures as low as -10°F/ -23°C.
HIT-ICE dispenses fast and easy in freezing weather without need to condition the cartridge until the temperature drops below 0°F / -18°C, keeping you on the job even when winter says you have to take the day off.
DON’T GET LEFT OUT IN THE COLD
Injectable mortar HIT-ICE
APPLICATIONS AND ADVANTAGES
Advantages• Low temperature adhesive anchoring
system for applications down to -10°F / -23°C in concrete
• Dispenses fast and easy even in freezing weather
• No need to warm the cartridge before use unless the cartridge temperature falls below 0°F / -18°C
Applications • Anchor installation and rebar doweling
for cracked concrete, uncracked concrete, and grout filled masonry in cold environments
Description Item number
Injectable mortar HIT-ICE 10oz/300ml 2055412
Injectable mortar HIT-ICE MC 10oz/300ml 3498239
Injectable mortar HIT-ICE 10oz/300ml MC + MD 1000 3498239
Accessories
Description Item number
Manual dispenser MD 1000 371291
Mixing nozzle HIT-ICE 371290
we want to hear from you
As your partner in chemical anchoring applications, Hilti offers a broad portfolio of pre-cut anchor rods to meet a wide range of needs, available right off the shelf. With sizes ranging up to 1-1/4”, featuring chamfered ends with nuts and washers included, you know Hilti anchor rods will help you get the job done quickly, efficiently, and right — without compromising your budget.
We now offer “cut-to-length” service for custom-made anchor rods. Select from 8 material types, diameters up to 2-1/2” and anchor rod lengths up to 48”. Just let us know what you need and we’ll have your custom solution anchor rods delivered to you within 2-4 working days (typical lead time).
CUSTOM MADE TO FIT
Cut-to-length anchor rods
APPLICATIONS AND ADVANTAGES
• Large range of materials and anchor rod diameters (1/4” to 2-1/2”)
• Head marking for easy verification of steel grade
• Available with chisel tip for use with HVU adhesive capsules
• Includes high-quality nuts with matching steel grade and thread tolerances for reliable performance
• Free of oil and other contamination for highest performance with adhesive anchoring systems
• Chamfered end ensures easy threading of the nut
ORDERING INSTRUCTIONS
For a quote or to order custom made anchor rods, call Hilti Customer Service at 1-800-879-8000. This service is currently available only in the United States.
MaterialElectro plated Hot dip galvanized Stainless steel
ASTM F1554grade 36
ASTM F1554grade 55
ASTM F1554grade 105
ASTM F1554grade 36
ASTM F1554grade 55
ASTM F1554grade 105
SS 304
SS 316
Thre
ad S
ize
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
7/8”
1”
1-18”
1-1/2”
1-3/4”
2”
2-1/4”
2-1/2”
Typical lead time 2–4 working days Available starting July 2017
Available upon request, check lead time with Hilti Available starting October 2017
CUSTOM MADE ANCHOR RODS COME IN:
• Eight different materials• Diameters up to 2-1/2”• Lengths up to 48” (lengths up to
144” upon request; may have longer lead-time)
RELATED PRODUCTS
Injectable adhesive anchor
Capsule adhesive anchors
CHOOSE YOUR: ① Diameter
② Length
③ Material:• Electro plated• Hot dip galvanized• Stainless steel
①
②Leverage the productivity advantage of screw anchors, even when the application demands corrosion-resistance, with Hilti screw anchor HUS-HR/CR (SS316).
The HUS-HR/CR yields up to 50% faster installation time than stud anchors and has the option of a countersunk head for setting flush to the surface.
EFFICIENCYMEETSVERSATILITY
Screw anchor HUS-HR/CR (SS 316)
APPLICATIONS AND ADVANTAGES• Miscellaneous metal (railing, fencing)• Glazing (facades, window wall)• General construction (tunnels, waste water
treatment plants, seating) • Required metric drill bit with every box• Fits within standardized fractional base plate
holesProductivity • Up to 50% faster installation time compared
to stud anchors• Drill. Drive. Done. Everywhere.Safety • No torque-wrench required• Set-flush with the surface, done.Technical data • PROFIS ready• Tested in accordance with ACI 318 and
CSA A23.3Edging and spacing • Closer spacing reduces base plate size• Manage challenging situations with reduced
edgingAnchor design• Carbide cutter blades welded onto tip to cut
concrete with ease• Pure Stainless Steel 316 (>99 %) • Available with countersunk head Easily removable • Fully removable solution• No grinding or hammering in necessary
PACKAGES FOR SIMPLE PLANNING, ORDERING AND INSTALLATION
Anchor package I:1 box of anchors + 1 drill bit
Anchor package II:1 master carton + drill bits + 1 socket
• Small projects• Additional jobsite orders
• Regular project orders• Purchase for stock
HUS-HR
Diameter HUS-HR
Length in
inch
Number of
anchors
Drill bits
Base plate hole
Item number
Diameter HUS-HR
Length in
inch
Number of
anchors
Drill bits Sockets Item
number
M61-3/4” 50 1 5/16” 3563440
M61-3/4” 200 4 1 3563544
2-3/4” 50 1 5/16” 3563441 2-3/4” 200 4 1 3563545
M83” 25 1 7/16” 3563442
M83” 100 2 1 3563546
3-1/4” 25 1 7/16” 3563533 3-1/4” 100 2 1 35635474-1/8” 20 1 7/16” 3563534 4-1/8” 100 2 1 3563548
M103-1/4” 25 1 9/16” 3563535
M103-1/4” 100 2 1 3563549
4-1/8” 25 1 9/16” 3563536 4-1/8” 100 2 1 35635505-1/8” 25 1 9/16” 3563537 5-1/8” 100 2 1 3563551
M143-1/8” 12 1 11/16” 3563538
M143-1/8” 48 2 1 3563552
5-1/4” 12 1 11/16” 3563539 5-1/4” 48 2 1 3563553
HUS-CR
Diameter HUS-CR
Length in
inch
Number of
anchors
Drill bits
Base plate hole
Item number
Diameter HUS-CR
Length in
inch
Number of
anchors
Drill bits
Torx Driver
Item number
M83” 25 1 7/16” 3563436
M83” 100 2 1 3563540
3-3/4” 20 1 7/16” 3563437 3-3/4” 100 2 1 3563541
M103-1/4” 25 1 9/16” 3563438
M103-1/4” 100 2 1 3563542
4-1/8” 25 1 9/16” 3563439 4-1/8” 100 2 1 3563543
HUS-HR HUS-CR
Click for more technical information
Leverage the productivity advantage of screw anchors, even when the application demands corrosion-resistance, with Hilti screw anchor HUS-HR/CR (SS316).
The HUS-HR/CR yields up to 50% faster installation time than stud anchors and has the option of a countersunk head for setting flush to the surface.
EFFICIENCYMEETSVERSATILITY
Screw anchor HUS-HR/CR (SS 316)
APPLICATIONS AND ADVANTAGES• Miscellaneous metal (railing, fencing)• Glazing (facades, window wall)• General construction (tunnels, waste water
treatment plants, seating) • Required metric drill bit with every box• Fits within standardized fractional base plate
holesProductivity • Up to 50% faster installation time compared
to stud anchors• Drill. Drive. Done. Everywhere.Safety • No torque-wrench required• Set-flush with the surface, done.Technical data • PROFIS ready• Tested in accordance with ACI 318 and
CSA A23.3Edging and spacing • Closer spacing reduces base plate size• Manage challenging situations with reduced
edgingAnchor design• Carbide cutter blades welded onto tip to cut
concrete with ease• Pure Stainless Steel 316 (>99 %) • Available with countersunk head Easily removable • Fully removable solution• No grinding or hammering in necessary
PACKAGES FOR SIMPLE PLANNING, ORDERING AND INSTALLATION
Anchor package I:1 box of anchors + 1 drill bit
Anchor package II:1 master carton + drill bits + 1 socket
• Small projects• Additional jobsite orders
• Regular project orders• Purchase for stock
HUS-HR
Diameter HUS-HR
Length in
inch
Number of
anchors
Drill bits
Base plate hole
Item number
Diameter HUS-HR
Length in
inch
Number of
anchors
Drill bits Sockets Item
number
M61-3/4” 50 1 5/16” 3563440
M61-3/4” 200 4 1 3563544
2-3/4” 50 1 5/16” 3563441 2-3/4” 200 4 1 3563545
M83” 25 1 7/16” 3563442
M83” 100 2 1 3563546
3-1/4” 25 1 7/16” 3563533 3-1/4” 100 2 1 35635474-1/8” 20 1 7/16” 3563534 4-1/8” 100 2 1 3563548
M103-1/4” 25 1 9/16” 3563535
M103-1/4” 100 2 1 3563549
4-1/8” 25 1 9/16” 3563536 4-1/8” 100 2 1 35635505-1/8” 25 1 9/16” 3563537 5-1/8” 100 2 1 3563551
M143-1/8” 12 1 11/16” 3563538
M143-1/8” 48 2 1 3563552
5-1/4” 12 1 11/16” 3563539 5-1/4” 48 2 1 3563553
HUS-CR
Diameter HUS-CR
Length in
inch
Number of
anchors
Drill bits
Base plate hole
Item number
Diameter HUS-CR
Length in
inch
Number of
anchors
Drill bits
Torx Driver
Item number
M83” 25 1 7/16” 3563436
M83” 100 2 1 3563540
3-3/4” 20 1 7/16” 3563437 3-3/4” 100 2 1 3563541
M103-1/4” 25 1 9/16” 3563438
M103-1/4” 100 2 1 3563542
4-1/8” 25 1 9/16” 3563439 4-1/8” 100 2 1 3563543
HUS-HR HUS-CR
Click for more technical information
we want to hear from you
The Split Bolt HSH, the Drywall Anchors HSP/HFP and the Metal HIT anchor HMH are the latest updates to our extensive light duty anchor product portfolio.
The Hilti drywall anchor HFP cuts its own thread, is removable, and can be set with nothing but a screwdriver. Split Bolts HSH and Metal HITS HMH are ideal for fastening to concrete and masonry, are tamper-proof and can be installed with a drill and a hammer.
Whether you’re fastening to concrete and masonry or drywall, this extension to our light duty anchor portfolio assures we have the right anchor for your application.
HSH HMH HSP HFP
AN ANCHORFOR EVERY DAYOF THE WEEK
Light duty portfolio extension
HFP
HMH
HSH
HSP
APPLICATIONS AND ADVANTAGES
Split bolt HSH and Metal HIT HMH • Electrical fixtures• Track attachment• Roof flashing• Concrete form work• Tamper-proof applications
• Wide length range up to 3-1/2” for HSH• Split bolt HSH with 2 head configuration
Round head (RH) and Flat head (FH)• Longer lengths available up to 3” for Metal
anchor HIT HMH in stainless and carbon steel• Drill, hammer and you’re done
Drywall anchors HSP/HFP• Office installations• Electrical fixtures• Interior finishing
• Cuts its own thread, no pre-drilling necessary• Available in non-conductive nylon or zinc and
with or without screw• Opening in head allows longer screws to pass
through-more flexibility• Published allowable shear load of 35 lb• Can be set with electric or standard screwdriver Accessories for Split bolt HSH and Metal anchor HIT HMH
Description Quantity Item number
Compact cordless rotary hammer TE 2-A22 1 3490196
Hammer drill bit TE-CX 1/4” x 6” 8 Pk 2025906
Description Anchors per box Item number
Split bolt
Split bolt HSH 1/4" x 1-1/4" RH 100 2173472
Split bolt HSH 1/4" x 1-1/2" RH 100 2173473
Split bolt HSH 1/4" x 2" RH 100 2173474
Split bolt HSH 1/4" x 2-1/2" RH 100 2173475
Split bolt HSH 1/4" x 1-1/2" FH 100 2173476
Split bolt HSH 1/4" x 2" FH 100 2173477
Split bolt HSH 1/4" x 2-1/2" FH 100 2173478
Split bolt HSH 1/4" x 3" FH 100 2173479
Split bolt HSH 1/4" x 3-1/2" FH 100 2173640
Metal HIT (additional lengths)
Metal anchor HIT HMH 1/4" x 2-1/2" SS 100 2173260
Metal anchor HIT HMH 1/4" x 3" SS 100 2173261
Metal anchor HIT HMH 1/4" x 2-1/2" 100 2173408
Metal anchor HIT HMH 1/4" x 3" 100 2173409
Drywall anchor
Drywall anchor HSP (metal) w/o screws 100 2158777
Drywall anchor HSP (metal) w/ screws 100 2158778
Drywall anchor HFP (nylon) w/o screws 100 2158779
Drywall anchor HFP (nylon) w/ screws 100 2158780
Hilti Modular Supports Plug-In for Smart Plant 3D is a design and planning tool for piping, cable tray and HVAC duct supports used in chemical, power, mining, oil, and gas construction projects. With the Plug-In for Smart Plant 3D, your design team will be able to automate the process of placing Hilti Modular Support Systems into your design. The Hilti Modular Supports Plug-In for Smart Plant 3D reports Hilti Modular Supports in material takeoffs, bill of materials generation and allows for clash detection, minimizing risks and changes on the jobsite.
SOFTWARETO SUPPORTYOUR DESIGN
Modular Supports Plug-in for Smart Plant 3D
APPLICATIONS AND ADVANTAGES
Applications• Plug-in has some generic assemblies
along with Hilti connection logic, which allows to make Smart Supports
• Designing by using smart support templates for rule-based frame supports such as I, L, T, U-shape, wall-to-wall or channel to steel/concrete — please refer to the manual supplied with the product for more details
• Plug-in has more than 700+ Hilti Parts from Hilti Channel and Strut Library
• Designing multi-disciplinary frame supports for pipes, cable trays and HVAC ducts or combining multiple supports to create more complex support structures
• Creating bills of materials and drawings in compliance with the engineering design basis
Technical data
Supported operating system Windows 7®
System requirements As per Host System
Security and authorizations Hilti signed software
Minimum required disc space 1024 MB
Graphic card requirement OpenGL 3.0 support
Description Item number
Hilti Modular Supports Plug-in for Smart Plant 3D 2163669
Advantages • 3D digital design content for Hilti
products and support libraries for modular frame supports
• Available as a plug-in for Intergraph’s Smart™3D
• Contains more than 700+ Hilti parts from the Hilti channel and strut library
• A must-have for engineers and designers planning their next CAPEx project using modular solutions
• Lets you easily adapt an engineering specification to a project specification using Microsoft™ Excel spreadsheets
we want to hear from you
FEATURES
Flexible Point Creation• Create control points• Insert manual points• Generate automatic point locations to
streamline the creation of layout data in their model files
• Place points over blocks• Recognizes the insertion point of the
block to create a point• Results in an efficient automatic point
insertion process on AutoCAD blocks
Place points over family• Recognizes nodes within the family
and grants automatic point insertion capability on a Revit family
• Simplifies the point creation process
Placing annotations• Automatically add annotations to field
points• Manually add annotations to a field
point; annotations are based on the selected insertion point
• Applies annotation settings to annotations associated with selected field points, as well as field properties
Custom reports• Reports documenting the status of
specific or all points within a drawing• Deviation reports can be generated
upon importing staked points• Deviation reports illustrate how point
locations might have changed from their initial location in the drawing/model
• Ideal tool for documenting changes between the office and actual field conditions
Easy field data import• Users can import field point data into
the Hilti PROFIS Field Points software while staying in their preferred design platform to assist with their QA/QC work flows for comparison in the model
• Miscellaneous items such as anchor bolt locations, sleeves, hangers, etc.
Hilti PROFIS Field points for AutoCAD/Revit is for contractors and engineers who need to easily create 2D and 3D field points within their design software.
To ensure easy stake-out on the jobsite, you can automatically insert field layout points for use with Hilti’s best-in-class construction positioning and layout systems, and import and export data to AutoCAD and Revit to review point layout status and accuracy.
PROFISFIELD POINTS
for AutoCAD / for Revit
Tool warranty. Some limitations apply. Contact Hilti for details.
ALL IN ONE PROFIS Detection
Hilti PROFIS Detection is our all-in-one, comprehensive software solution for the Hilti PS 1000 and Ferroscan systems. It features full data processing from raw data to 3D models, combines Ferroscan data with X-Scan radar data, and incorporates EM sensor data for depth calibration and material classification.
PROFIS Detection allows for grid coordinate entry drill hole marking. It provides comprehensive options for reporting and documentation after scan analysis, and lets you export your results to PROFIS Anchor, AutoCAD, Sketch-Up, Revit and other popular applications.
APPLICATIONS AND ADVANTAGES
Applications• Non-destructive inspection and
analysis of concrete structures, creation of assessment reports and documentation for structrual analysis and as-built checks
• Scan positions can be labeled with building coordinates and exported for accurate scan placement in design files or repositioned later on-site with layout tools
• Allows export of scan data for use with popular design applications such as AutoCad, Trimble SketchUp and many more
• Evaluation of structural layout to minimize potential for damage when drilling, coring or sawing — structural information also allows more accurate communication and tightens up bidding projects on jobs based on what operators find in the area
• Export X3D scan file to import in PROFIS Anchors for collision-free anchor and base plate design
• Creates an accurate 3D model of what is actually in the concrete structure and allows integration in the BIM platform in order to create more efficient, accurate, cost-effective and reliable project
Technical dataCPU requirements 2GHz or faster x86-compatible processor
Graphic card requirement Open GL 3.2 support
Memory (RAM) requirements 2 GB
Minimum required disc space 250 MB
Description Item number
PROFIS Detection 1-year subscription 2115901
planning to support design, refurbishment or extension of existing structures
• Concrete cover assessment showing where depth of cover is inadequate, for structural repair work and statistics with Hilti Ferroscan scan data
• Building acceptance inspections, rebar verification and analysis as well as quality control
Advantages • Subsequent scan data analysis and
data management on a PC for PS 1000 X-Scan and PS 200/250 Ferroscan
• Full data processing from raw data to 3D models, including 2D and 3D plan views or cross-sectional images
• Advanced processing software with comprehensive evaluation and analysis features using different migration types as well as various calculation and visualization parameters
• Easy creation of assessment reports and documentation in Microsoft Word, PDF or HTML format
• Data export in various formats — 2D (BMP, JPG) and 3D (DXF, COLLADA, PLY, X3D)
• Three-sensor data overlay: radar, EM and Ferroscan for easy target object classification and depth calibration
• Scan position can be labeled with building coordinates and exported
• Drill hole markers in true diameter and depth can be added and positioned in top and cross-sectional view and exported
• Preparation of ready-to-print assessment reports and statistics (allowing qualitative and quantitative analysis of the situation regarding reinforcement and depth of concrete cover) for PS 200/250 Ferroscan
we want to hear from you
ALL IN ONE PROFIS Layout Office
Import digital plans and create layout/control points more easily than every before with Hilti PROFIS Layout Office, the all-in-one point creation software solution. Its simple user interface, which can be operated with minimal training, makes it easy to use and the perfect fit for those times when more complex CAD programs are too much tool for the job.
Perform distance, angle, area or down-and-out computations, then upload the files to your Hilti total station for jobsite layout.
APPLICATIONS AND ADVANTAGES
Applications• CAD import: Ability to import AutoCAD
DWG and DXF files for creating layout points
• Graphical user interface: Provides direct access to common functions for a shorter learning curve and minimal self-training
• Standard view controls: Offer a common user interface designed for anyone with a limited understanding of CAD for fast, easy operation
• Point creation: Multiple point selection in Individual, Window, or Current view point selection together with layers for maximum control of point selection
• Enter plans: Lets you enter plans on the spot and perform COGO (coordinate geometry) functionality in the office
• Field to finish: Easily create CAD-ready deliverables directly from survey data
• Straight forward: No need to learn a complex engineering CAD program
Technical dataOperating system Windows 7 or later
Compute processor 64-bit quad core CPU
Computer memory 8 GB RAM
Screen resolution 920 x 1080 pixels
Graphic card Open GL-compatible graphics card with > 1 GB
Max file size 60 MB
Max no. of points 50000
Description Item number
PROFIS Layout Office 1-year subscription 2117533
Advantages • Easy creation of a digital replica of your
paper construction plans• Office solution for preparation and
evaluation of your data to and from the field
• Creation of layout points from CAD files, files for uploading to a Hilti total station for layout
Tool warranty. Some limitations apply. Contact Hilti for details.
Get more work out of every 22V charge with the all-new Hilti Cordless Band Saw SB 4-A22. Its compact size gets you working in tight spots with ease, cutting through a wide range of materials from plastics to metal rods, pipes and struts with fewer sparks and less noise. An integrated, ultra-bright LED lamp puts working light exactly where you need it.
Like all Hilti tools, it’s built to deliver outstanding performance and reliability even in the most extreme situations, under the toughest circumstances. Backed by an outstanding 20-year warranty against manufacturing defects, which includes a 2-year warranty against the wear-and-tear of commercial use and a 1-day repair turnaround guarantee, you can count on the Hilti Cordless Band Saw SB 4-A22 to make the cut.
MAKING THE CUT —THE NEW CORDLESSBAND SAW
Cordless band saw SB 4-A22
APPLICATIONS AND ADVANTAGES
Advantages• Cutting with low noise and low debris • Compatible with Hilti 22V batteries • Built-in LED lamp for a shadow-free
view of the cutting line • Compatible with 28.875” x 0.5” band
saw blades • Impact-resistant, glass-fiber-reinforced
tool and battery casings
Applications • Cutting metal installation channels and
pipes with reduced sparks and low noise
• Cutting plastic pipes • Cutting threaded rods • Cutting 1” and 2” EMT pipes • Cutting 1-5/8” strut
Technical data
Weight according EPTA-Procedure 01/2003 8.8 lb
No load speed 167 rpm
Rated voltage 21.6V
Max cutting width 2-1/2”
Dimensions (LxWxH) 13.8 x 9.8 x 8.5 in
Description Package content10/14 Blades Item number
14/18 Blades Item number
SB 4-A22 Industrial battery combo
Includes 1x tool, 2x Batteries, 1x Charger, 1x 3-pack of Blades and Small Tool Bag
3559785 3559789
SB 4-A22 Compact battery combo
Includes 1x tool, 2x Batteries, 1x Charger, 1x 3-pack of Blades and Small Tool Bag
3559786 3559790
SB 4-A22 Tool body only Includes tool body and 1x 3-pack of Blades 3559787 3559788
Accessories
Description3 Pack
quantity10/14 Blades Item number
14/18 Blades Item number
SB 4 BM Band saw blades 1 Pack 2150031 2150032
DUST CONTROL PRODUCTS AND SOLUTIONSClearing the air on the new OSHA respirable crystalline silica dust regulation
At Hilti, we are committed to helping you reduce dust exposure and increase your productivity on site with products and services designed to greatly reduce exposure to dust. It’s time to take advantage of all the benefits of Hilti dust removal systems.
We have designed resources and solutions to help professionals just like you in the construction industry better understand and comply with the new OSHA 1926.1153 regulations for silica dust exposure.
OSHA Table 1Choose a pre-determined option based on your application, fromOSHA Table 1 — Exposure Control Methods for Silica Dust.
Objective Data or Performance TestingUtilize third-party performance or objective data to document that workers performing a particular application are in compliance with the permissible exposure limit of ≤ 50 μg/m3 average over an eight hour day.
Scheduled Air MonitoringPeriodically test for a particular application to validate if the user falls under the permissible exposure limit of ≤ 50 μg/m3.
Click to watch an informational OSHA silica dust webinar
THERE ARE THREE WAYS TO COMPLY WITH OSHA SILICA DUST REGULATIONSClick the icons below to download each resource
we want to hear from you
HILTI DUST CONTROL PRODUCTS AND SOLUTIONS
Learn more about Hilti dust control products and solutions for your application
MANAGE EMPLOYEE CERTIFICATIONS AND TRAININGS
Navigating the new OSHA silica dust regulation (1926.1153) goes beyond understanding the rules and having the proper equipment. Click to learn more.
OSHA SILICA DUST RESOURCES
Hilti Product Selector Guide
Hilti White Paper OSHA Standards to Silica Dust
DRIVERS LICENSES
LIFT CERTIFICATIONSASBESTOS TRAINING POWDER TOOL CERTIFICATIONS
OSHA CERTIFICATIONSFALL PROTECTION CPR & FIRST AID
HAZMAT LEAD CERTIFICATION
CRANE OPERATION
CORDLESS IN CHARGESolutions for every jobsite
Advanced cordless technology helping drive your business. Featuring intelligent power management systems and delivering maximum performance, our cordless tools are the professionals’ choice for any job. Our batteries are the toughest out there, so when you’re ready to work, your tools are ready to work too.
Click to learn more about cordless tool application solutions
Click to learn more about our Lithium-Ion battery technology
APPLICATION SOLUTIONS No matter what kind of projects you work on or which trades you specialize in, Hilti has the cordless platform to help you get the job done.
CORDLESS TECHNOLOGYOur batteries provide the power to outperform under the toughest jobsite conditions. These lightweight, lithium-ion batteries charge quickly and hold a charge longer, so you can be sure that your tools are ready to work when you are.
• Drilling• Screw Fastening• Bolting and Anchoring• Cutting• Direct Fastening• Grinding• Hammer Drilling and Chipping
we want to hear from you
Learn more about the innovations of the TE 6-A36
Learn more about cordless services
INNOVATIONCordless rotary hammer TE 6-A36
The TE 6-A36 is the latest in a long line of advances in rotary technology. Hilti’s unwavering commitment to innovation is rooted in our understanding of what it takes to get the job done. The TE 6-36 has a brushless drive providing outstanding power to weight ratio.
BEYOND THE TOOL
Reduce costs: With our fast and free repairs this premium service comes without a premium price tag. We have easy service access with no receipts necessary and offer the lowest cost of ownership. Increase productivity: Our team of experts are always ready to help work through an issue, offer application advice, or demo a product for your team. Maximize transparency: When you need support know exactly how to access it quickly and who to contact. Looking for a better way to get the job done? We’re here to help.
DB
S •
07/1
7
Hilti, Inc. (US) Legacy Tower, Suite 10007250 Dallas Parkway | Plano, TX 75024 www.facebook.com/HiltiNorthAmerica www.hilti.comCustomer Service: 1-800-879-8000
Hilti (Canada) Corporation2360 Meadowpine Blvd.Mississauga, Ontario, L5N 6S2www.facebook.com/HiltiNorthAmericawww.hilti.caCustomer Service: 1-800-363-4458
Top Related