Industrial and commercial ventilation (Catalogue no. 1)
Industrial and commercial ventilation components - fans for round and rectangular ducts, sound-insulated, axial and roof fans, air handling units with heat recovery, air heating units, accessories.
Energy saving ventilation Air handling units(Catalogue no. 2)
Energy saving supply and exhaust units and air handling units with heat recovery with air capacity up to 6500 m3/h.
Fire and smoke damper KPDU (Catalogue no. 5)
Fire dampers KPDU for smoke protection systems of buildings and premises.
Domestic ventilation (Catalogue no. 6)
Domestic ventilation: fans, mono-pipe exhaust kitchen and bathroom fans, air distribution units, air ducts and fittings, access doors, ventilation kits.
Air distribution units (Catalogue no. 9)
Plastic and metal air distribution products (grilles, disk valves, diffusers, etc.) for ventilation, air conditioning and heating.
Access doors (Catalogue no. 10)
Plastic and metal access doors for accessing concealed equipment and utility lines. Special offers for ceramic tiles.
Spiral seam air ducts (Catalogue no. 13)
SPIROVENT spiral seam vent ducts and fittings of 100 to 1600 mm diameter.
Flexible ducts and fittings for ventilation, air conditioning and heating(Catalogue no. 14)
Flexible and semi-flexible air ducts made of polymeric materials, aluminium, galvanized or stainless steel, metal fittings for ventilation, air conditioning, heating, gas handling and abrasive particles aspiration.
Air handling units AIRVENTS (Catalogue no. 3)
Energy saving air handling units with air capacity up to 40 000 m3/h, for use in large residential, industrial and commercial objects.
Energy saving ventilation Geothermal systems GEO VENTS (Catalogue no. 4)
Energy saving system GEO VENTS with use of the earth’s surface layers heat. High ventilation system energy efficiency and low operating costs.
Domestic fans (Catalogue no. 7)
Domestic fans with air capacity up to 365 m3/h with extra functions: timer, humidity sensor, motion sensor, etc. Applied for premises up to 30 m2.
VENTS VN Mono-pipe exhaust ventilation (Catalogue no. 8)
Exhaust ventilation in houses with mono-pipe ventilation system based on VENTS VN fans.
Plastic grilles for ventilation and air conditioning (Catalogue no. 11)
PROFIPLAST extruded plastic grilles for ventilation and air conditioning.
Metal grilles for ventilation, air conditioning and heating (Catalogue no. 12)
Metal grilles made of extruded metal profile for ventilation and air conditioning.
Flat and round PVC air ducts (Catalogue no. 15)
Flat and round PVC ducts PLASTIVENT for ventilation of residential, office and commercial premises and connection of exhaust ventilation equipment (kitchen extractors, hoods, exhaust boxes, etc).Wide product range of fittings.
Energy saving ventilation.Single room energy recovery ventilators.(Catalogue no.16)
Single room reverse ventilators with energy regeneration for efficient ventilation and lowest investments in ready-built and brand new premises.
3VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
Application examples
page
10
Round air ductwork system
page
16
Flat air ductwork system
page
22
About uspage
4
Advantages of Plastivent system
page
6
CONTENT
4 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
VENTS company was founded in the nineties of the XXth century.
Dynamic development of the enterprise and ongoing study of the consumer demand enabled rapid international leadership of the company in the ventilation industry.
VENTS is a powerful research and development enterprise with 2500 professionals working as a single team to ensure a full production cycle from idea to end product. The production base of the company is located at more than 60 000 m2 area. It includes 16 workshops equipped under the latest international standards and each of them is comparable to a separate plant.
Modern equipment, active implementation of advanced technologies and highly automated production are the characteristic features of VENTS company.
The company undergoes rapid dynamic development; fundamental researches and effective designs in climatic equipment industry are in the focus of the company’s business strategy.
The joint cooperation of the corporate design department, test laboratories and production workshops let us introduce high quality products to the market.
Special attention is paid to the manufacturing of the goods during all manufacturing stages including monitoring of the technological conditions. Technical characteristics of supplied raw materials are thoroughly checked. Quality control system which meets international standard requirements ISO 9001:2000 was implemented at the enterprise.
Environmental protection is one of the basic components of the corporate development. The technological process at the enterprise is arranged in such a way as to exclude any negative impact to the environment. To solve the global energy saving problem we develop a special climatic equipment that provides comfortable conditions for people and reduces the energy demand significantly.
Perfect quality, competitive prices, high production potential, technical capabilities and the wide product range stimulate long-term partrnership and product promotion all over the world.
The VENTS ventilation products are exported to more than 90 countries and are sold through the distribution network of 120 companies worldwide. Share of the VENTS products globally is above 10%.
VENTS is a member of high-rank international organizations, the leading HVAC experts.
Since 2008 VENTS has been a fully-featured member of HARDI Association (Heating, Air-conditioning and Refrigeration Distributors International, USA).
Since 2010 VENTS has been a participant of AMCA Association (the Air Movement and Control Association (AMCA) International, Inc.). In 2011 VENTS successfully passed tests for compliance with AMCA standards and the VENTS products were certified for the USA market.
In 2011 VENTS joined HVI (Home Ventilation Institute, USA) Association.
W E L C O M E T O T H E V E N T S W O R L D !
5VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
Powerful production facilities, high automation level, active implementation of innovative technologies in the production process made VENTS a worldwide ventilation leader.
We manufacture our products with respect to unique geographical, climatic, technical features of each country and do our best to fulfill the client's wishes anywhere anytime.
Get benefit from cooperation with VENTSTM and enjoy the maximum range
of products of the top quality from one manufacturer.
Metal processing workshop
Powder coating workshop
Residential fans workshop
Air handling units workshop
Spiral air ducts workshop
Wet coating workshop
Ventilation grilles workshop
AirVents air handling unit workshop
Flexible air ducts workshop
Extrusion workshop
Electric motors workshop
Electrical accessories workshop
Aluminium grilles and diffusers workshop
Injection moulding workshop
Industrial fans workshop
Extruded grilles workshop
6 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT AND ROUND
PVC DUCTWORKS
Basic advantages of "Plastivent" system:
• A great variety of fittings designed for assembly of complex ductworks with any geometry based exclusively on "Plastivent" system components. • Smooth inner duct surface provides low air resistance.• Corrosion resistant properties ensure long service life.• Low weight. • Ventilation system based on "Plastivent" air ducts produces lower noise level as compared to other systems with corrugated or steel air ducts. • Low thermal conductivity • Environmentally friendly plastic used for manufacture of "Plastivent" system does not sustain combustion.
• Extremely easy mounting due to no complicated assembly operations and special tools.• Small overall dimensions of the rectangular components allow using the system in limited area above false ceilings.• Aesthetic view makes the system suitable for mounting in ready-made premises.
"Plastivent" air ductwork system is the ideal solution for arrangement of ventilation systems in small and medium-sized residential, office and commercial premises as well for connection of cooker hoods, exhaust hoods, cowls and other exhaust equipment. It includes rectangular 55x110, 60x120, 60x204 mm air ducts, round Ø 100, 125, 150, 200 mm air ducts and a great variety of fittings such as bends, reducers, connectors, etc. Operation temperature from -30 0С up to +70 0С.
7VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
page
16
Round duct Round telescopic duct
page
17
Round flexible duct connector 90° bend for round ducts T-joint for round ducts
page
18
Wall plate for round ducts Round duct connector Connector with backdraft
damper for round ducts
page
19Connector with backdraft
damper and wall plate for
round ducts
Connector with plate for
round ducts
Reducer
8 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
page
20
Reducer Step round reducer Round to flat connector
page
21
Round flexible duct connector Holder for round ducts
page
22
Flat duct Flat duct connector Flat duct connector
with damper
page
23
Flexible flat duct connector Air duct connector with a plate Air duct connector with
a plate and a back valve
9VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
page
24
Vertical 90° bend for
flat ducts
Horizontal 90° bend for
flat ducts
Versatile flat angular
connector
page
25
T-joint for flat ducts Flat duct holder 90° connecting bend for
flat and round ducts
page
26
T-joint for flat and
round ducts
Reducer for flat ducts Wall plate for flat ducts
page
27
End grille End grille with air pass
regulation
Reducer for flat and
round ducts
page
28
Reducer for flat and
round ducts
Wall plate with flange Round to flat connector
(symmetric)
10 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
APPLICATION EXAMPLES
Kitchen
11VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
APPLICATION EXAMPLES
Bathroom
Apartment
12 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
APPLICATION EXAMPLES
A 125 VRF
A 125 VRF
A 125 VRF
A 125 VRF
С 125
MV 120 VJAluvent Ø125
Aluvent Ø125Vents ВК 125
A 150 VRF
A 125 VRF
A 100 VRF
Aluvent Ø 150
Aluvent Ø 125
Aluvent Ø 100
Cafe
Plastivent as extension of tin air ducts
13VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
APPLICATION EXAMPLES
A 125 VR
A 125 VR
A 125 VR
A 125 VR
Aluvent Ø 125
Aluvent Ø 125
C 125
C 125
C 125
House
14 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
APPLICATION EXAMPLES
MVM 300
FB 150
Vents VK 150
Aluvent Ø150
Aluvent Ø125
Aluvent Ø125
C 125C 125
A 125 VRF
A 125 VRF
Office
15VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
APPLICATION EXAMPLES
Aluvent Ø125
Aluvent Ø125
Aluvent Ø125
Aluvent Ø125
C 125
C 125
C 125
C 125
C 125
A 125 VRF
A 125 VRF
Vents 150 VK
A 125 VRF
A 125 VRF
A 125 VRF
16 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
ROUND PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Formation of round air ductworks.
Design
• Made of white PVC.
• Diameters: 100, 125, 150 and 200 mm.
• Duct length from 350 to 2500 mm.
• Connected with matching diameter connectors.
Application
• Supply and exhaust ventilation of various premises.
• Wall mounting.
Design
• Made of white PVC.
• Telescopic design of two parts.
• Diameters: 100, 125, 150 mm.
• Air duct length is adjusted within 300 to 500 mm or 500 to 1000 mm.
Round duct
CodeDimensions [mm]
D D1 L
10035 100 103 350
20035 125 128 350
30035 150 153 350
40035 200 204 350
1005 100 103 500
2005 125 128 500
3005 150 153 500
4005 200 204 500
1010 100 103 1000
2010 125 128 1000
3010 150 153 1000
4010 200 204 1000
1015 100 103 1500
2015 125 128 1500
3015 150 153 1500
4015 200 204 1500
1020 100 103 2000
2020 125 128 2000
CodeDimensions [mm]
D D1 D2 D3 L
1805 100 103 104 107 300-500
2805 125 128 129 132 300-500
3805 150 153 154 157 300-500
1810 100 103 104 107 500-1000
2810 125 128 129 132 500-1000
3810 150 153 154 157 500-1000
CodeDimensions [mm]
D D1 L
3020 150 153 2000
4020 200 204 2000
1025 100 103 2500
2025 125 128 2500
3025 150 153 2500
4025 200 204 2500
10035/2 104 107 350
20035/2 129 132 350
1005/2 104 107 500
2005/2 129 132 500
1010/2 104 107 1000
2010/2 129 132 1000
1015/2 104 107 1500
2015/2 129 132 1500
1020/2 104 107 2000
2020/2 129 132 2000
1025/2 104 107 2500
2025/2 129 132 2500
Round telescopic duct
D1
D L D2
D3
D1
L D
inner duct outer duct
17VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
ROUND PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of flexible round ducts.
Design
• Made of white PVC.
• Cover the connector with air duct and fix it with clamps.
• Connecting diameters: 100, 125, 150, 200 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same diameter air ducts at 90°.
Design
• Made of white plastic.
• Connecting diameters: 100, 125, 150 mm.
Application
• Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
• Connection of same diameter round ducts and integration into complex ventilation systems.
Design
• Made of white plastic.
• Connection of same diameter three round ducts at 90°.
• Connecting diameters: 100, 125, 150 mm.
CodeDimensions [mm]
а D D1
1113 60 100 103
2123 60 125 1283133 60 150 1534143 60 200 204
CodeDimensions [mm]
D D1 а b
121 100 97 137 30
222 125 122 164 30
323 150 147 189 30
CodeDimensions [mm]
D D1 а b c
131 100 97 173 30 139
232 125 122 198 30 164
333 150 147 223 30 189
Round flexible duct connector
90° bend for round ducts
T-joint for round ducts
a D
D1
b
a
D
D1
D1
D1
a
c
b
D
D
18 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
ROUND PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of air ducts to ventilation shafts.
• Decoration of mounting openings.
Design
• Made of white plastic.
• Screw fixing to wall.
• Connecting diameters: 100, 125, 150, 200 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same diameter air ducts.
Design
• Made of white plastic.
• Designed for direct installation into air duct and equipped with a lock ring.
• Connecting diameters: 100, 125, 150, 200 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same diameter air ducts.
Design
• Made of white plastic.
• Equipped with a backdraft damper for back flow prevention.
• Designed for direct installation into air duct and equipped with a lock ring.
• Connecting diameters: 100, 125, 150, 200 mm.
CodeDimensions [mm]
D h a b
15 103 3 150 134
25 128 3 170 15435 151 3 204 188
45 204 3 284 268
CodeDimensions [mm]
D D1 а
111 100 96 62
212 125 123 62
313 150 148 62
414 200 197 62
CodeDimensions [mm]
D D1 а
1111 100 96 62
2121 125 123 62
3131 150 148 62
4141 200 197 62
Wall plate for round ducts
Round duct connector
b
a h
D
D
a D1
D
a D1
Connector with backdraft damper
for round ducts
19VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
ROUND PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of same diameter air ducts.
• Decoration of mounting openings.
Design
• Made of white plastic.
• Equipped with a wall plate for decoration of mounting openings.
• Equipped with a backdraft damper for back flow prevention.
• Screw fixing to wall.
• Connecting diameters: 100, 125, 150, 200 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same diameter air ducts.
• Decoration of mounting openings.
Design
• Made of white plastic.
• Equipped with a wall plate for decoration of mounting openings.
• Screw fixing to wall.
• Connecting diameters: 100, 125, 150, 200 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of various diameter air ducts.
Design
• Made of white plastic.
• Connecting diameters: 80-100, 100-120, 100-125, 100-150, 125-150, 150-200 mm.
CodeDimensions [mm]
а b c D
1511 150 134 62 100
2521 170 154 62 1253531 204 188 62 1504541 284 268 62 200
CodeDimensions [mm]
а b c D
151 150 134 62 100
252 170 154 62 125353 204 188 62 150454 284 268 62 200
CodeDimensions [mm]
а D1 D2 D3 D4
110 60 103 100 76 80
211 60 129 125 96 100
311 96 154 150 98,5 100
312 60 154 150 121 125
413 71 204 200 146 150
611 60 124 120 98,5 99
Connector with backdraft damper and wall plate for
round ducts
Reducer
D
a c
b
D
a c
b
D1
D2 D3
D4
a
Connector with plate for round ducts
20 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
ROUND PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of Ø 120 and 125 mm round air ducts.
Design
• Made of white plastic.
• Connecting diameters: 125-129 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of various sized air duct.
Design
• Made of white plastic.
• Connecting diameters: 80-100-120-125-150 mm.
• Cut out spare length piece to get the required size.
Application
• Supply and exhaust ventilation of various premises.
• Connection of round and flat ducts.
Design
• Made of white plastic.
• Direct connection to round and flat ducts.
• Connecting ducts: 100-55x100, 100-60x122, 125-60x204 mm.
CodeDimensions [mm]
a D1 D2 D3 D4
216 42 129 125 115 119
CodeDimensions [mm]
a Ø
310 125 80-100-120-125-150
CodeDimensions [mm]
a a1 b b1 D1 D2 L
511 113 110 59 55 103 100 137
711 124 122 64 60 103 100 137
812 208 204 64 60 128 125 140
Reducer
Round step reducer
Round to flat connector
a
15
0
12
5
12
0
10
0
80
D2
D1
L
30 30
a1
a
b1 b
D1
D2
D3
D4
a
21VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
ROUND PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Mounting of round ducts to wall, ceiling or any other plane surface.
Design
• Made of white plastic.
• Fixation to plane surface with screws.
• Special snaps provide reliable fixation of the duct with the holder.
• Connecting diameters: 100, 125, 150, 200 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of flexible ducts with plastic system components.
Design
• Made of white plastic.
• Connection to flexible air ducts without clamps.
• Flexible spiral seam duct is connected to one side and the other side is connected to Ø 100 mm flange.
• Left or right (R) thread. Right thread connectors are used with Polyvents air ducts.
CodeDimensions [mm]
а b D
16 113 20 103
26 138 20 12836 163 20 15346 213 20 203
CodeDimensions [mm]
А B C D E
1214 90 30 60 100 110
1214R 90 30 60 100 110
Da
b
Holder for round ducts
Round flexible duct connector
CB
AD E
inte
rnal
Application
• Supply and exhaust ventilation of various premises.
• Connection of flexible ducts with plastic system components.
Design
• Made of white plastic.
• Connection to flexible air ducts without clamps.
• Flexible spiral seam duct is connected to one side and the other side is connected to Ø 100 mm air duct.
• Left or right (R) thread. Right thread connectors are used with Polyvents air ducts.
Round flexible duct connector
CodeDimensions [mm]
А B C D E
1215 90 30 60 100 1101215R 90 30 60 100 110
D
CB
A E
exte
rnal
22 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Formation of flat air ductworks.
Design
• Made of white PVC.
• Size: 55x110, 60x122, 60x204 mm.
• Duct length from 350 to 2500 mm.
• Connected with matching connectors.
Flat duct
CodeDimensions [mm]
a b a1 b1 L
50035 55 110 52 107 35070035 60 122 57 119 35080035 60 204 57 200 3505005 55 110 52 107 5007005 60 122 57 119 5008005 60 204 57 200 5005010 55 110 52 107 10007010 60 122 57 119 10008010 60 204 57 200 1000
CodeDimensions [mm]
a b a1 b1 L
5015 55 110 52 107 15007015 60 122 57 119 15008015 60 204 57 200 15005020 55 110 52 107 20007020 60 122 57 119 20008020 60 204 57 200 20005025 55 110 52 107 25007025 60 122 57 119 25008025 60 204 57 200 2500
b
a1
b1
L
a
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Equipped with a backdraft damper for back flow prevention.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Flat duct connector
Flat duct connector with damper
CodeDimensions [mm]
a b a1 b1 c
515 55 110 59 114 66
717 60 122 63 125 69
818 60 204 64 208 91
CodeDimensions [mm]
a b a1 b1 c
5151 55 110 59 114 66
7171 60 122 63 125 70
8181 60 204 64 208 91
c
b1a
ba
1
c
b1
a
b
a1
23VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat flexible ducts.
Design
• Made of white PVC.
• Cover the connector with air duct and fix it with clamps.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
CodeDimensions [mm]
a b a1 b1 c
5153 55 110 52 107 60
7173 60 122 57 119 60
8183 60 204 57 200 60
Flexible flat duct connector
b
a1
b1
a
c
Application
• Supply or exhaust ventilation of various premises.
• Connection of single size flat air ducts.
• Decoration of mounting opening and connections to wall.
Design
• Made of white plastic.
• Air ducts are fitted inside the connector.
• Equipped with lock rings for easy adjustment.
• Screw fixing to wall.
• Connecting sizes: 55х110, 60х120, 60х204 mm.
Application
• Supply or exhaust ventilation of various premises.
• Connection of single size flat air ducts.
• Decoration of mounting opening and connections to wall.
Design
• Made of white plastic.
• Air ducts are fitted inside the connector.
• Equipped with lock rings for easy adjustment.
• Equipped with a back valve to prevent back drafting.
• Screw fixing to wall.
• Connecting sizes: 55х110, 60х120, 60х204 mm.
Air duct connector with a plate
Air duct connector with a plate and a
back valve
CodeDimensions [mm]
a b c A B C D L
555 110 55 2 141 154 154 141 131757 120 60 2 141 154 154 141 131858 204 60 3 229 154 242 141 186
CodeDimensions [mm]
a b c A B C D L
5551 110 55 2 141 154 154 141 1317571 120 60 2 141 154 154 141 1318581 204 60 3 229 154 242 141 186
24 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Angular connection of flat ducts.
Design
• Made of white plastic.
• Turning point angle from 3° to 48°.
• Depending on selected turning angle one connector side is cut out. Connection to the flat duct through matching sized connector.
• On flange side direct connection to flat duct of respective size.
• Connecting section: 55x100 and 60x204 mm.
CodeDimensions [mm]
a b c
52510 190 143 55х110
82810 286 247 60х204
Versatile flat angular connector
a
32
b
c
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° vertically.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° horizontally.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Vertical 90° bend for flat ducts
Horizontal 90° bend for flat ducts
b
a
c
a
c
b
CodeDimensions [mm]
a b c
5252 55x110 89 32
7272 60x120 93 32
8282 60x204 103 42
CodeDimensions [mm]
a b c
5251 55х110 143 32
7271 60х122 155 32
8281 60х204 238 32b
a
c
a
c
b
25VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Mounting of flat ducts to wall, ceiling or any other plane surface.
Design
• Made of white plastic.
• Fixation to plane surface with screws.
• Specially designed configuration provides reliable duct to holder fixation and quick dismantling.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
CodeDimensions [mm]
a b c
56 114 59 74
76 126 64 86
86 209 65 169
Flat duct holder
a
c
b
Application
• Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
• Connection of same sized flat ducts and integration into complex ventilation systems.
Design
• Made of white plastic.
• Connection of same sized three flat ducts at 90°.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
• Direct connection to matching sized ducts.
T-joint for flat ducts
CodeDimensions [mm]
a b с
535 144 174 55х110
737 155 185 60х122
838 248 288 60х204
b
c
c
a
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of flat and round ducts at 90°.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100, 60x122-100, 60x204-100, 60x204-125, 60x204-150 mm.
• Flat ducts have direct connection and round ducts are connected through a matching connector.
90° connecting bend for flat and round ducts
CodeDimensions [mm]
a D D1 b h L
521 55х110 100 103 58х113 87 138
721 60х122 100 103 63х125 87 140
821 60х204 97 100 64х208 92 140822 60х204 122 125 64х208 92 164823 60х204 147 150 64х208 92 188
D1
D
L
a b
h
26 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of air ducts to ventilation shafts.
• Decoration of mounting openings.
Design
• Made of white plastic.
• Screw fixing to wall.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Wall plate for flat ducts
CodeDimensions [mm]
a b c d e D E
55 111 56 2 141 141 154 154
75 123 61 2 141 141 154 154
85 205 61 3 229 141 242 154
a
cd
D
bE e
Application
• Supply and exhaust ventilation of various premises.
• Connection of flat different sized ducts.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-60x204 mm.
Reducer for flat ducts
CodeDimensions [mm]
a b c
518 60х204 55х110 30
b
a
cc
T-joint for flat and round ducts
CodeDimensions [mm]
aхb D D1 c d h L
531 55х110 100 103 58 113 87 172
L
d
b
D1
D
a c
h
Application
• Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
• Connection of flat and round ducts.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100 mm.
• Direct connection to air duct.
27VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Decoration of supply or exhaust vents of public, residential and industrial ventilation systems.
• Correct air flow distribution in premises.
• Wall or ceiling mounting.
Design
• Made of white plastic.
• Detachable front part facilitates cleaning.
• Modification with an insect screen (s) is available.
• Connecting dimensions: 55x110 and 60x204 mm.
Application
• Decoration of supply or exhaust vents of public, residential and industrial ventilation systems.
• Correct air flow distribution in premises.
• Wall or ceiling mounting.
Design
• Made of white plastic.
• Equipped with a movable flap for air capacity regulation.
• Air pass is regulated with a tilt wand.
• Detachable front part facilitates cleaning.
• Modification with an insect screen (s) is available.
• Matches with 55x110 and 60x204 mm air ducts.
End grille
End grille with air pass regulation
CodeDimensions [mm]
a b c d e f
571 88 137 114 59 73 9
871 93 232 208 64 76 9
CodeDimensions [mm]
a b c d e f
572 88 137 114 59 73 18
872 93 232 208 64 76 18
f
ec
b
a d
f
e
d
c
b
a
Application
• Supply and exhaust ventilation of various premises.
• Flat to round duct connection.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100 mm.
• Direct connection of reducer to round and flat ducts.
Reducer for flat and round ducts
CodeDimensions [mm]
cхb Ø D f а
115 58х114 103 62 32
Dc
a
b
f
28 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
Application
• Supply and exhaust ventilation of various premises.
• Connection of round and flat ducts.
Design
• Made of white plastic.
• Direct connection flat duct, connection to
round duct with connector.
• Connecting ducts: 100-60x122 mm.
Round to flat connector (symmetric)
CodeDimensions [mm]
a b c Ø D Ø D1 e h L
7112 124 122 30 100 103 60 64 137
ab
e h
L
c c
D1D
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of air ducts to ventilation shafts.
• Decoration of mounting openings.
Design
• Made of white plastic.
• Screw fixing to wall.
• Connecting sizes: 60x122 mm.
Wall plate with flange
CodeDimensions [mm]
a b c d D e E
750 126 172 3 65 113 60 65
Application
• Supply and exhaust ventilation of various premises.
• Flat to round duct connection.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100 mm.
• Reducer has direct connection to flat air ducts and connection through connector to round ducts
Reducer for flat and round ducts
CodeDimensions [mm]
cхb Ø D f а
1156 58х114 100 62 32
Dc
a
b
f
VENTS reserves the rights to modify any of its products’ features,
designs, components and specifications at any time and without notice
to maintain the development and quality of manufactured goods.
06/2013
Top Related