IND-Smith Welding and Fabrication Equipment 5/21/2015GENERAL TERMS AND CONDITIONS OF SALE -THURSDAY MAY 21, 2015
ORDER OF SALE:
ITEMS WILL BE SOLD IN NUMERICAL ORDER. It will be at the discretion of the Auctioneer to sell items out of sequence, divide orconsolidate lots.
REGISTRATION:
By registering as a Bidder and/or participating as a Bidder at the auction sale Bidder is bound by the Terms & Conditions set forth hereinand announced on the day of sale. Bidder agrees that such Terms & Conditions are binding on the Bidder whether or not the Bidder waspresent and/or heard such announcements. Bidder agrees that Auctioneer is in control of the conduct of the auction sale and has the rightto reject any bid by any Bidder at the auction sale. It is at the sole discretion of the Auctioneer as to whether or not any bid is inconformity with the Terms & Conditions of the auction sale. Furthermore, Auctioneer may refuse to accept a bid whenever, in his solediscretion bid is not in good faith or Bidder appears to be under the influence or have some incapacity at time of sale. ALL PERSONSmust be registered to bid and will be identified by number to facilitate the speed of the auction.
TIE -BIDS
Auctioneer will rule in case of "TIE" Bids. In the event of a TIE BID or any uncertainty as to offered last and highest bid the Auctioneerhas a right to resolve any such at the time by accepting the Bid that the Auctioneer believes is in good faith and was the last, highest andbest bid. Auctioneer may open the bidding between the parties at his discretion and option and such decision will be final and binding onaffected parties.
SALES TAX:
Sales tax will be collected if applicable. Dealers can present Resale Certificates.
REMOVAL:
Auctioneer and Seller assume no responsibility for items left on sale site at sale's conclusion. Buyer is URGED to REMOVE ITEMS assoon as possible or to self insure for potential loss. Removal will be until 5:00 pm today or 1-hour following the sale, whichever is later.Additional Removal: FRIDAY MAY 22nd AND TUESDAY MAY 26th FROM 8:00 am TO 4:00 pm. AFTER WHICH ITEMS WILLBE CONSIDERED ABANDONED BY BUYER AND DISPOSED OF.
NOTICE TO INSPECT "AS_IS WHERE IS":
Auctioneer presents all information in brochures, catalogs, and other advertisements from sources believed to be accurate. These arerepresentations of the Auctioneer. Prospective Buyers should inspect all items to their own satisfaction. "BUYER BEWARE" Items areavailable for public inspection and the foregoing are merely guides. ALL ITEMS are being sold AS IS-WHERE-IS with no warranty orguarantee-actual or implied.
TERMS:
A 12% Buyer's Premium will be collected, an additional 5% Buyer's Premium for Online Bidders. Payment must be made in full day ofsale by CASH, WIRE TRANSFER, CASHIER'S CHECK or COMPANY CHECK if Accompanied by BANK LETTER of GUARANTY,CREDIT CARDS to include: MASTERCARD or VISA ONLY. After an item has been sold, it becomes the sole responsibility of thePurchaser. No items can be removed until complete settlement has been made. Settlement can be made at any time during the sale.
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 2Furrow Auction Company
Settlement must be made today and an invoice with the paid item receipt will be supplied to the Purchaser upon settlement. The PAIDreceipt ticket will be required in order to remove items from the site. All checks should be made payable to Furrow Auction Company."ALL SALES ARE FINAL"ONLINE BIDDING TERMS: Online Bidders should review the "Online Terms & Conditions" in detail and will be held to those terms.SAFETY DEVICES: Items purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards as required by law. It isPurchaser's responsibility that items purchased be so equipped and safeguarded to OSHA and any other requirement before placing itemsinto operation.All Riggers, Contractors or Buyer's conducting specialized removal must provide a "Certificate of Insurance" with a minimum $1 milliontotal liability and naming Furrow Auction Company and Seller as "LOSS PAYEE". Qualified and Insured Riggers must perform removalof items that may affect the Real Property. Damage responsibility will be the responsibility of the Riggers and Buyers of item removed.Rigging and Removal is the responsibility of the Buyer. All removal activity must be in accordance with OSHA Guidelines andStandards. Removal may begin when auction has concluded and complete payment has been made.OUR STAFF
SAM FURROW - OWNER/AUCTIONEERBLAKE WILSON - VP INDUSTRIAL DIVISION, AUCTIONEERWIL WAUGH - AUCTIONEER/PROJECT MGRYOU CAN REACH US AT OUR EMAIL ADDRESS: [email protected]
VISIT WWW.FURROW.COM TO VIEW ALL UPCOMING AUCTIONS. OUR FAX NUMBER IS 865 525-4179.
1 SKIL Saw, 1/2" Electric Drill
2 (2) 1/2" Electric Drills, (1) Ridgid, (1) Milwaukee
3 Bosch Mdl 11224VSR Rotary Hammer Drill
4 Dewalt 1/2" Drive Electric Impact Wrench
5 (3) Electric Jig Saw,(1) Dewalt, (2) Black & Decker
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 3Furrow Auction Company
6 Belt Sander
7 (3) Sanders Palm & Orbital
8 Dewalt Reciprocating Saw
9 Set Precision Balance Scales
10 Watsco Mdl WC-5 Micro-Flash, W/Recovery System
11 Air Hoses and Vacuum Pump
12 Ryobi 10" Portable Table Saw
13 1hp Air Compressor, Storage Tank
14 Central Pneumatics 40LB
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 4Furrow Auction Company
15 Viper 4316, 1-Man Auger, W/6", 8" Auger
16 2500PSI Pressure Washer, Honda Gas Engine
17 Ryobi 3100PSI, 2.5 Gallon Pressure Washer, W/Honda Gas Engine
18 Miller Dial arc Arc Welding Power Source, W/Tig Welder, Leads
19 Miller Millermatic 251 Wire Feed Welder
20 Miller 250 Wire Feed Welder
21 Miller Millermatic 250 Wire Feed Welder
22 Changshundianqi Mdl NBC-270 Welder
23 Miller Blue Star 3500 Watt Generator/140Amp Gas Welder, W/Honda 9HP gas Engine
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 5Furrow Auction Company
24 Miller Spectrum 875 Auto Line DC Plasma Cutter
25 Miller Spectrum 300 Plasma Cutter
26 Lincoln SP-135T Wire Feed
26A Lincoln 225, 225Amp Arc Welder
27 Taylor-Winfield Spot Welder
28 Miller Spoolmatic 30A Aluminum Spool Gun
29 Cutting Torches, Regulators, etc
30 Various Welding leads
31 Various Welding leads
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 6Furrow Auction Company
32 Scotchman Portafab 45, 45Amp Iron Worker
33 Northern Industrial 7" X 12" Horizontal Band Saw
34 Pro-Cut 7" X 12" Horizontal Band Saw
35 Ridgid 14" Abrasive Chop Saw
36 Wilton 20" Vertical Drill Press, 12sp
37 Craftsman 50" 12sp Vertical Drill Press
38 M & M 16sp Mdl H-406S Vertical Drill Press
39 Toledo Scale, W/Sterling Digital Controller, Digital Read-out, 5,000lb
40 Skat Blast Sand Blast Cabinet
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 7Furrow Auction Company
41 Rockwell Mdl 50004, 3hp Vacuum, 55 Gallon Drum
42 Hotsy Mdl 500 Steam Type Pressure Washer
43 Power Pro 2400PSI, 5 1/2hp Honda Pressure Washer
44 Readi-Heater 170C, 170,000 BTU Forced Air Heater
45 Readi-Heater Pro 115, 115,000 BTU Forced Air Heater
46 Vacuum
47 Wrought Iron Inserts, etc (on 3-shelves)
48 Shelving W/Contents, Safety Hats, Nuts, Bolts, Fasteners, etc
49 Maxair 40" Shop Fan
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 8Furrow Auction Company
50 Maxair 40" Shop Fan
51 Custom Built 36" Box Fan
52 Excalibur 4,000LB Engine Hoist
53 Unibor Mdl EQ50 Magnetic Drill
54 Custom Built Shop Cart, W/6" Jaw Vise, Bench Grinder, etc
55 Electric Air Compressor, 2hp
56 Milwaukee Portable Band Saw
57 Dewalt Portable Band Saw
58 (4) Foundation Jacks
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 9Furrow Auction Company
59 Custom Built Metal Shop Cart
60 Custom Built Metal Rack, (2) Metal Carts, etc
61 Torch Cart, W/Hoses, Torches, Tooling, etc
62 Regulators, Torches, etc
63 Misc Welding Wire, Rods, etc
64 Angle Grinders, Electric Drills, Reciprocating Saws, etc
65 Misc Bar Clamps
66 Misc Bar Clamps
67 Contents Box, Misc Vise Grips, Clamps
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 10Furrow Auction Company
68 Contents (2) Boxes, C-Clamps
69 Misc Hand Tools, Hammers, Punches, Squares, Levels, etc
70 Dewalt 14" Abrasive Chop Saw
71 Milwaukee Cordless Portable Band Saw
72 Warn 110 Volt, 1,000LB Electric Winch
73 Homelite 5500 Watt Generator
74 Impact Sockets
75 2 1/2 Ton Floor Jack
76 Hydraulic Tubing Bender
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 11Furrow Auction Company
77 Clarke Portable Bender, W/Pedestal
78 (4) Jack Stands, (4) Custom Built Stands
79 48" X 72" Metal Welding Table, W/6" Jaw Vise
80 36" X 60" Custom Built Metal Welding Table on casters
81 49" X 125" Custom Built Welding Table
82 48" X 120" Custom Built Welding Table
83 Metal Stock , Square Tube, Round Bar, Channel, Flat Stock etc
84 Custom Built Metal Storage Rack
85 (5) Custom Built Metal Work Horses, (2) Roller Stands
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 12Furrow Auction Company
86 Custom Built Wood Burning Heater
87 10hp Air Compressor Horizontal Tank, Single Stage
88 Caterpillar Mdl T50DSA Forklift, 5,000LB, LP Gas Solid Tire, W/Side Shift, S/N 9PB262,188" Lift
89 Drott Mdl 3330 Carry Desk Crane, LP Gas, 3-Stage Mast, S/N 6224692
90 Bayliner 24' Cuddy Cabin Boat, W/galvanized Trailer, Mercuriser, Inboard/Outboard
91 1986 Carver 27' Cabin Cruiser, W/Twin Mercruiser, 1.7 Liter Engine, 190hp, S/NCDRH6153F787
92 Custom Built 48" X 72" Tag-A-Long Trailer
93 1955 Chevy 2-Door, 55 Chevy Post Body, Finders, Frame (to reassemble) (no motor andtransmission)
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 13Furrow Auction Company
94 1971 Chevy C-10 Short Bed (no motor no transmission)
95 1978 Suzuki GS1000 Motorcycle, ODO 33,911, Vin GS1000102575 (Title)
96 Starcraft Roadstar Truck Bed Camper (Camper Insert)
97 White Lighting Race Track Type Tool Box
98 Set 72" Warehouse Steps
99 Husky Over/Under Tool Box on casters
100 (3) Plastic Shelves, W/Contents, Misc Oils, Cleaning Chemicals, Grease, etc
101 Misc Nut Drivers, Screwdrivers, etc
102 Misc Hammers
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 14Furrow Auction Company
103 Contents Box , Tape, Stud Finders
104 O-rings, Gaskets, etc
105 Misc Hand Tools, Plyers, Bar Clamps, Pullers
106 Misc Abrasives, Disc, Sand Paper, Belts, etc
107 Files, Hand Tools, Pipe Expansion Tools
108 (5) Gear Pullers, Pitman Arm Pullers, etc
110 CPS Freon Scale, etc
111 Radiator, Pressure Tester, Pressure Gauges, etc
112 (3) Set 6" Calibers, Manual, Dial, Digital, Outside Micrometer
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 15Furrow Auction Company
113 Hyper Jet Power Programmer for 7.4 Liter Ford Diesel Engine
114 Dewalt 18 Volt Cordless Drill
115 Drillmaster 7" Variable Speed Polisher/Sander
116 Stapler, Black & Decker Cordless Drill
117 (2) Boxes Various Sockets, Extensions, etc
118 (2) Boxes Various Size Open End Box and Wrenches
119 Craftsman Socket Set, Box, W/Misc Sockets
120 Tape & Die Set, Drill Bits, etc
121 Misc Pneumatic Tools, Impact Gun, etc
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 16Furrow Auction Company
122 Husky Tool Box on casters
123 Cornwell 2-Drawer Work Cart on casters
124 Ridgid Wet/Dry Vac
125 Janitrol Gas Shop Heater
126 Carrier Gas Hanging Type Shop Heater
127 (7) White ??????
128 (3) Hose Reels, (1) W/Hose
129 Misc Abrasives Wheels 20"
130 OX/Acyl Hose, etc
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 17Furrow Auction Company
131 Pexto Edger
132 Garwood Industries Mdl A514-30 Hoist
133 Ingersoll Rand Pneumatic Hoist
134 (7) Electric Motors
135 (6) Electric Motors, (5) GE 3hp, (1) Dayton 3hp
136 Kold-Draft Ice Crusher
137 (2) Eye Wash Stations
138 Goodway Ream-a-matic Pipe Reamer
139 Nova 390 Paint Pump, W/gun
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 18Furrow Auction Company
140 Juki Mdl LU-563 Walking Foot Sewing Machine
141 3 1/2hp 21" Lawn Mower
142 Rally 22" 4hp Lawn Mower
143 Shindaiwa String Trimmer
144 John Deere Pull Behind Spreader
145 55 Gallon Drum Spinner/Dolly
146 Golden Glow Wood Burning Stove
147 (8) 8' Cable Chokers
148 (16) Small Chokers, (8) 48" , (8) 60"
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 19Furrow Auction Company
149 (8) 8' Cable Chokers
150 (10) Various Size Cable Chokers
151 (12) Cable Chokers
153 (10) Various Size Cable Chokers
154 Wooden Table W/Contents, Air Storage Tank, Misc Fasteners, Screws, Bolts, etc
155 Misc 4 1/2" Grinding Wheels, 7" Grinding Wheels, etc
156 Misc Fasteners, Screws, Bolts, Nuts, etc
157 Misc Paints, Degreaser, etc
158 Welding Rod Cabinet
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 20Furrow Auction Company
159 20" Aluminum Extension Ladder
160 16' Aluminum Extension Ladder
161 Fuel Cans, Oil Cans, Creeper, etc
162 Vacuum Gauge, etc
163 2" Belt Sander
164 Mitre Box and Saw mounted on table
165 2-Ton Floor Jack, 1 12/-Ton Floor Jack, (3) Jack Stands
166 Misc Yard Tools, Hedge Trimmer, Pole Saw, Electric String Trimmer, Rake, etc
167 Contents (3) Containers, Hydraulic Jack Oil, Various Oils, Nails, Fasteners, etc
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 21Furrow Auction Company
168 (6) Bolt Bins, Misc Bolts, Nuts, Screws, Cap Screws, Washers, etc
168A (2) 220 Volt Drop Cords
169 Under- counter Refrigerator
170 Automotive Air Conditioner Compressor, Condensers, Hoses, etc
171 Drink Vending Machine
172 (4) Pedestal Shop Lights
173 Decorative Wooden, Glass Front & Side Curio Cabinet
174 Wood and Metal Display Rack, Wooden Office Table
175 (2) Upholstered Recliners
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 22Furrow Auction Company
176 (2) Metal Frame Stack Chairs
177 Wooden Drafting Table
178 Pressed Wood Credenza, W/Hutch
179 Upholstered Mid-back Office Chair
180 8' Folding Table
181 Dry Erase Boards, Cork Board, File Cart on casters
182 L-Shaped Pressed Wood Desk, W/Right hand Return, W/Hutch
183 (2) Flat Screen Computer Monitors, HP PAC 1410 All-N-One Printer
184 HP Color Laser Jet 4650N Printer
IND-Smith Welding and Fabrication Equipment 5/21/2015
Page: 23Furrow Auction Company
185 HP Laser Jet 4300TN Printer
186 Brother MFC6550 Fax Machine, Paper Cutter
187 Misc Office Supplies Clip Boards, Pins, Files, Folders, etc
188 (2) 3-Drawer Metal File Cabinets
189 Remaining Furniture in Office, Wing Back Upholstered Chair, Task Chair on casters, MetalFramed Glass Top Coffee Table, Office Table
Top Related