Download - How to collaboratively aut Course Handbooks collaboratively author ...

Transcript

DOC-152 24 May 2012 This ‘How to’ guide

Multiple authors often need to collaboratively produce a document such as a Course Handbook

created in SharePoint to control the flow of the document and approval of the final version. The approved Course

Handbook can then be downloaded from SharePoint and uploaded into WebLearn for students to access.

Step 1: How to customise the existing ‘Collect feedback’ workflow

The standard ‘Collect feedback’ workflow allows either sequential

parallel process (the ‘All at once’ option

avoids delays caused by any one individual perhaps being slow to complete the task. Each individual is prompted to

Check out the document so that only one person at a time can edit it, and then Check

1. The Document Owner creates a Library

2. Once the Library has been set up, select and

i. On the ribbon, click the Library

ii. Towards the extreme right, in the

iii. On the Workflow Settings page, select

iv. On the first page of Add a Workflow

‘How to’ guide is licensed under http://creativecommons.org/licenses/by

How to collaboratively author

Course Handbooks

Multiple authors often need to collaboratively produce a document such as a Course Handbook

created in SharePoint to control the flow of the document and approval of the final version. The approved Course

Handbook can then be downloaded from SharePoint and uploaded into WebLearn for students to access.

the existing ‘Collect feedback’ workflow in SharePoint

workflow allows either sequential or parallel review processes. We recommend the

option- see Figure 2b), which sends the task to all recipients at the same time. This

avoids delays caused by any one individual perhaps being slow to complete the task. Each individual is prompted to

Check out the document so that only one person at a time can edit it, and then Check it back in to the doc

Library and uploads the document for review, e.g. ‘Course Handbook’.

select and customise the required workflow as follows

Library tab.

Towards the extreme right, in the Settings group, click Workflow Settings.

page, select All for the content type and click Add a Workflow

Add a Workflow (Figure 1) complete the details as illustrated and described overleaf

http://creativecommons.org/licenses/by-sa/3.0/

collaboratively author

Course Handbooks

Multiple authors often need to collaboratively produce a document such as a Course Handbook. A workflow can be

created in SharePoint to control the flow of the document and approval of the final version. The approved Course

Handbook can then be downloaded from SharePoint and uploaded into WebLearn for students to access.

in SharePoint

parallel review processes. We recommend the

recipients at the same time. This

avoids delays caused by any one individual perhaps being slow to complete the task. Each individual is prompted to

back in to the document library.

review, e.g. ‘Course Handbook’.

the required workflow as follows:

Add a Workflow.

as illustrated and described overleaf:


Page | 2

Figure 1

a) Select a workflow Template: Select the Collect Feedback – SharePoint 2010 template.

To enable the workflow template (you need to be a Site Collection Administrator to do this):

i. On the upper-left corner on your SharePoint site, click Site Actions, and then click Site Settings.

ii. Under Site Collection Administration, click Site Collection Features.

iii. Scroll down the page and, next to Workflows, click Activate.

b) Type a unique name for this workflow: This example is called ‘Request for comments’.

c) Task List: Keep the default Task List on the left hand side: Tasks.

d) History List: Select Workflow History to store the workflow log in the default list (this list records the

history of every workflow in your SharePoint site), or choose New history list to maintain the history

of this particular workflow.

e) Start Options: In order to enable all participants to review and edit the document when they are all

ready, select the first option Allow this workflow to be manually started ... Leave all the other

options unselected.

f) Click Next.

a

b

c

d

e

f


Page | 3

v. On the second page of Add a workflow (Error! Reference source not found.), complete the details as follows:

Figure 2

a) Assigned to: Enter the e-mail addresses of the people to whom the workflow should assign tasks.

b) In the Order column, select All at once (parallel) to allow the recipients to address the task at their

convenience, without having to wait for others to complete their edits first.

c) Add an optional message that will appear in the email sent out to each reviewer.

d) Use the date picker to enter the due date by which the task must be completed by all recipients.

e) Choose who you what to inform when the workflow start and ends, e.g. yourself, the head of

department, the course director etc.

f) Click Save.

SharePoint has now stored your customised workflow. The next step demonstrates how the workflow works in practice.

Step 2: How an individual to whom the task has been assigned responds

The recipients to whom the task has been assigned receive an email message with an explanation of the request, a due

date and a link to the document:

a b

c

f

e

d


Page | 4

The document opens directly in MS Word, with a yellow bar at the top of the screen, prompting the user to check the

document out:

In MS Word the user should switch on Track Changes, make necessary edits to the document, and insert any electronic

comments where appropriate.

On clicking Save, the user is prompted to check the document back into the SharePoint library (see Figure 2). By default

the version number allocated is the next logical minor version number, e.g. if the existing version number was v 0.1, the

edited version will be identified as v 0.2. It is recommended that you leave the system-generated version number. When

the Document Owner is satisfied with the document after all recipients have edited it, he or she will allocate the major

version number (e.g. v 1.0) and publish the document.

����Name of the document


Page | 5

Figure 2

Note: The workflow can be re-activated after a major version of the document has been published, if a further

round of reviewing and editing is required. At the end of the second round of minor versions (v 1.xx) the

Document Owner will publish the updated document as v 2.0.

In the comments box, the person who has completed the task should insert a relevant comment as to what was done. This

is useful for tracking purposes. The same comment can be copied and pasted into both the Document Check-in box (shown

in Figure 2) and the Workflow feedback box (see Figure 3).

To complete the task, the reviewer should click on the File > Info > Open this Task button (in MS Word 2010) and fill in the

feedback form that follows.

Figure 3

����The document has been checked in

(see Figure 2)


Page | 6

Step 3: How the document owner finalises the workflow

The Document Owner receives an email message (see Figure 4) to indicate when all the named recipients have

completed the task:

a) The email message provides a summary of the workflow history.

b) Clicking on the link View the workflow history takes the Document Owner to the detailed history of

the workflow (see Figure 5).

The Document Owner peruses the edited document and makes a decision:

• If the document is acceptable, the owner can check out the document, accept/reject any track changes as

necessary, then check in the document as a published version (e.g. v 1.0).

• If another round is required, it is necessary to accept the changes and then start the workflow again with the

updated version of the document (v 1.0).

Figure 4

a

b


Page | 7

Figure 5


Page | 8

Step 4: Upload the course handbook into WebLearn

If the document is a Course Handbook, then the Document Owner will need to make it available to

students in their respective WebLearn areas. Currently there is no automated facility to import the final

document directly into a WebLearn site.

The Document Owner should Check Out the final version of the Course Handbook (so that no-one else

continues working on it in the SharePoint library), Download it and Save it on their own computer – by

default it is saved into My Documents > Sharepoint Drafts.

Log into WebLearn (https://weblearn.ox.ac.uk) using your Oxford Single Sign-on credentials. Under My My My My

Act ive Si tesAct ive Si tesAct ive Si tesAct ive Si tes , access the WebLearn site into which you wish to upload the Course Handbook.

Click on ResourcesResourcesResourcesResources on the left hand menu bar (to add the ResourcesResourcesResourcesResources tool, use Site S i te S i te S i te In foInfoInfoInfo > Edi t Edi t Edi t Edi t

Too lsToo lsToo lsToo ls ).

The size limit for uploading a single file into WebLearn is 60 Mb. If your Course Handbook is larger than

that, you will need to use WebDAV. Full instructions are provided within the Resources tool. Navigate to

the folder in which you want to upload the Course Handbook.

Click here for instructions on using

WebDAV

… from the AddAddAddAdd menu, click UploadUp loadUp loadUp load

Fi lesF i lesF i lesF i les .


Page | 9

Click BrowseBrowseBrowseBrowse to find the appropriate file on your computer or network, and then click Upload F i les Upload F i les Upload F i les Upload F i les

NowNowNowNow .

To add a description or any other details, such as who can access the file or when it should be visible,

click Add deta i ls fo r th is i temAdd deta i ls fo r th is i temAdd deta i ls fo r th is i temAdd deta i ls fo r th is i tem , which will allow you to do the following:

1. Type a description of the resource in the text box provided. This will be displayed if ResourcesResourcesResourcesResources is

viewed through a Web Conten tWeb Conten tWeb Conten tWeb Conten t access view.

2. Choose the resource's copyright status, add copyright information, and display a copyright alert:

i. If you select Use copyr ight be lowUse copyr ight be lowUse copyr ight be lowUse copyr ight be low , a text box will appear in which you can add

information about the copyright.

ii. For information about copyright and fair use, click more in fomore in fomore in fomore in fo . Be aware that all

components of a file, such as images in PowerPoint presentations, must be used within the

terms of the Copyright, Design and Patents Act 1988. See

http://copyrighttoolkit.com/podintro.html for a useful summary of copyright issues in an

electronic environment.

iii. If you would like to display the terms to users when they access your resource, select

Display copyr ight a ler t and requ ire acknowledgment when accessed by othersDisp lay copyr ight a ler t and requ ire acknowledgment when accessed by othersDisp lay copyr ight a ler t and requ ire acknowledgment when accessed by othersDisp lay copyr ight a ler t and requ ire acknowledgment when accessed by others .

This option will require users to agree to the copyright terms to view the resource. To see

the alert, click what 's th is?what 's th is?what 's th is?what 's th is? You cannot edit this alert.

3. Under Ava i lab i l i ty and AccessAva i lab i l i ty and AccessAva i lab i l i ty and AccessAva i lab i l i ty and Access , control who can access the file and when it is available.

Click UpdateUpdateUpdateUpdate to save the details for your Course Handbook. The Course Handbook is now saved in your

WebLearn site. You will need to decide how to make it available to students, e.g. from the site Home Home Home Home

PagePagePagePage , from a different HTML page, or via the student Access V iewAccess V iewAccess V iewAccess V iew . Create a student Access ViewAccess ViewAccess ViewAccess View by

using the Act ionsAct ionsAct ionsAct ions menu > Make Web Content L inkMake Web Content L inkMake Web Content L inkMake Web Content L ink , which will create a user friendly link to

ResourcesResourcesResourcesResources on the left hand menu bar. In this case, you might like to hide the usual Resources tool (Si te Si te Si te Si te

In foIn foIn foIn fo > Page OrderPage OrderPage OrderPage Order > click on the light bulb to dim it).

In the WebLearn Guidance site (http://weblearn.ox.ac.uk/info) there are separate step-by-step guides on

handling files in Resources and using WebDAV in WebLearn.

Type in a DisplayDisp layDisp layDisp lay NameNameNameName you want displayed in

ResourcesResourcesResourcesResources ; this should be a user-friendly name. If you

don't add a display name, the filename will be used.

Upload more than one file if

you wish.

Optionally send an email to all site members to notify them of the addition to Resources.Resources.Resources.Resources.

Add details such as a description and copyright information.