7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
1/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 1ttp://homemade-modern.com/ep55-concrete-bar/
JAN
18
y Ben Uyeda
EP55 Concrete Bar
This outdoor bar with a concrete countertop is a sturdy piece of outdoor furniture that serves as a
nice place to sit and have a drink or as a food prep island. Concrete countertop slabs are pretty
easy to make, but are quite heavy, so I recommend making this project near its final destination.
This bar is made from 3 concrete slabs that are bolted and supported by a wall made out of 2x4s.
Enter to win a RYOBI Phone Works to
package that'll transform your phone in
your smartest tool.
SHOPPING CART
Your shopping cart is empty
THE LATEST FROM HMM
JOIN RYOBI NATION
Shop the HMM Store
HMM X RYOBI Phone Works Too
Giveaway
HOME LATEST EPISODES TOOLS + MATERIALS ABOUT CONTACT BENS BLO
http://homemade-modern.com/content/bens-blog/http://homemade-modern.com/contact/http://homemade-modern.com/about-why-we-create/http://homemade-modern.com/tools-materials/http://homemade-modern.com/content/latest-episodes/http://homemade-modern.com/http://homemade-modern.com/hmm-ryobi-phone-works-tool-giveaway/http://homemade-modern.com/shop/https://plus.google.com/u/1/101497056765697976061http://youtube.com/user/HomeMadeModernhttp://facebook.com/ben.uyedahttp://twitter.com/BenUyedahttp://pinterest.com/BenUyeda7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
2/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 2ttp://homemade-modern.com/ep55-concrete-bar/
This is one of the more challenging projects I have posted. It's critical to make sure that the bolts,
which are cast into the slabs, are aligned with each other.
SUPPLIES:
Quikrete 5000 (20-25 Bags)
Available at Home Depot
QUIKRETE 5000 Concrete Mixis a commercial-
grade blend of stone or gravel, sand, and cement and
is specially designed for higher early strength. This is
the recommended concrete mix to use because of the
high early strength and low price. It !s great for making
tables, pavers, stools, and lamps and is typically found
in 80-pound bags at Home Depot, but 60-pound bags are also available.
3/4" Melamine Board
Available at Home Depot
Melamine board is particle board with a smooth laminate surface. It's a great product for making
concrete formwork.
2x4s + 2x3s
Available at Home Depotor your local lumber yard
I used 2x4s to make the support wall that the concrete slabs connect to and 2x3 scraps as supports
for the melamine molds.
Fence Boards
Available at Home Depot
I used redwood fence boards to clad the support wall. They were pretty rough and needed a bit of
sanding, but were cheap and look nice. If you want to a spend a bit more money and a bit less time
sanding, deck boards will also work.
Galvanized Bolts
Available at Home Depot
I used 3/8" diameter bolts, 8" long as anchor bolts to help the bolts grip the concrete when they're
embedded. I used a nut to clamp a large washer to the head of the bolt.
Silicone Caulk
Available at Home Depot
I used silicone caulk to seal the molds.
Share your HomeMade Modern projects
on RYOBI Nation.
Promo Code: HMM
TOOLS + MATERIALS
Learn about the tools and materials we
like working with at HomeMade Modern
See Tools + Materials
SUBSCRIBE TO HMM
Get email updates on our latest project
and upcoming book release.
Email Address
Subscribe
TALK TO US!
Have an idea, comment or question?
Send Us A Message
http://homemade-modern.com/dev/tools-materials/https://ryobitools.com/user/register?signup_type=nation&blogger=da04823c6ed406c0257a500fb197b2557/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
3/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 3ttp://homemade-modern.com/ep55-concrete-bar/
TOOLS:
RYOBI 18 Volt Cordless Drill
Available at Home Depot
RYOBI 18 Volt Circular Saw
Available at Home Depot
RYOBI 18 Volt Reciprocating Saw
Available at Home Depot
RYOBI Orbital SanderAvailable at Home Depot
INSTRUCTIONS:
STEP 1: Cut the Melamine Board
I cut the 3 1/2" wide strips of melamine board to use as the sides of the molds. If you do this with a
circular saw, clamp a straight edge to the board to serve as a guide. A table saw makes this step a
little easier.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
4/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 4ttp://homemade-modern.com/ep55-concrete-bar/
STEP 2: Assemble the Molds
It's important that the 2 side slabs are the exact same size and that all 3 slabs are the same width,
so take care when assembling the molds. I used short pieces of 2x3 as supports and screwed the
laminate boards to them.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
5/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 5ttp://homemade-modern.com/ep55-concrete-bar/
STEP 3: Check Your Molds
I checked to make sure the corners molds were at perfect right angles with a large speed square.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
6/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 6ttp://homemade-modern.com/ep55-concrete-bar/
STEP 4: Glue the Corners
I like to make sure the corners of the molds will hold so I glue them tightly together using a hot gluegun.
STEP 5: Seal the Mold
I used silicone caulk to seal the edges and corners of the mold from the inside. I squeezed some
caulk out and smoothed it out with my finger.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
7/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 7ttp://homemade-modern.com/ep55-concrete-bar/
STEP 6: Sand the 2x6
I used an orbital sander to sand the 2x6. I started with 100 grit paper to round down the edges and
finished with 220 grit.
STEP 7: Make the Bolt Holders
You only get one shot at casting the bolts into the slab so it's important to make sure that the bolts
in the 3 slabs will align with the support wall. I cut extra pieces of the melamine board into strips that
are the same width as the molds and then measured and drilled holes that the bolts could fit
through. I didn!t want the these supports to touch the wet concrete so I glued small pieces of 1/2"
thick plywood to the ends so that they'd hover 1/2" above the surface of the concrete.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
8/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 8ttp://homemade-modern.com/ep55-concrete-bar/
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
9/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 9ttp://homemade-modern.com/ep55-concrete-bar/
STEP 8: Prepare the Rebar
I cut the 1/2" rebar with a reciprocating saw and then wired the pieces of rebar into frames to serve
as reinforcement for the slabs. The frame should be about 3-5 inches from the perimeter of the
molds.
STEP 9: Get the Bolts Ready
Insert the bolts through the holes in the supports and use washers and bolts to keep them from
sliding through. Adjust the nuts so that the bolt heads go about halfway into the slabs. I used 3 bolts
in each of the slabs.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
10/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 10ttp://homemade-modern.com/ep55-concrete-bar/
STEP 10: Mix + Pour the Concrete
I mixed the Quikrete 5000 in a large plastic mixing tray using a hoe and then shoveled it into themolds until they were three-quarters full. I placed the rebar frames onto the wet concrete and then
filled the molds to the top. The rebar will settle deeper in the concrete as you work the surface
above it. Use the hoe to push down the concrete as you fill the molds.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
11/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 11ttp://homemade-modern.com/ep55-concrete-bar/
STEP 11: Screeed + Trowl
I used a straight scrap board to screed the top of the concrete. Work the screed back and forth to
level the concrete. I let the concrete set about 30 minutes and then used a metal float to work the
cream to the surface. I spent about 2-3 minutes working the surface of each slab. Then place the
anchor bolts into the wet concrete.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
12/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 12ttp://homemade-modern.com/ep55-concrete-bar/
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
13/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 13ttp://homemade-modern.com/ep55-concrete-bar/
STEP 12: Cover + Keep Moist
I covered the concrete with some boards and a sheet to make sure that nothing touched the wet
concrete. I used a garden hose to keep the concrete moist over a 72 hour period.
STEP 13: Remove the Molds
After letting the concrete cure for 72 hours, I removed the molds.
STEP 14: Build 2 Frames for the Support Wall
I used 3" deck screws to connect 2x4s into two rectangular frames.
STEP 15: Drill Holes for the Bolts
I aligned the rectangular frames and marked the locations of the bolts. I then drilled 3/4" holes
through the frame. I wanted the holes to be slightly larger than the bolts so that I could adjust the
frames against the slabs before tightening the nuts and locking them place.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
14/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 14ttp://homemade-modern.com/ep55-concrete-bar/
STEP 16: Assemble the Support Wall
I cut 2 pieces of 2x4 to serve as base and top plates for the support wall. I tilted up the side slabs
with the frames loosely bolted in place and then screwed the frames to the baseplate 2x4. The
slabs are heavy, so it's a good idea to have some help. Drill holes through the top plate and the top
of the frames that align with the bolts in the top slab. Screw the top plate onto the two frames.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
15/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 15ttp://homemade-modern.com/ep55-concrete-bar/
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
16/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 16ttp://homemade-modern.com/ep55-concrete-bar/
STEP 17: Place the Top Slab
Lift the top slab into place. The slab is very heavy, so be careful about smashing fingers between
the slabs. I recommend using at least 4 strong people to lift the slab into place and guide the bolts
through the holes in the support wall.
STEP 18: Tighten the Bolts
Once the top slab is in place, properly adjusted and aligned, you can tighten all the nuts to secure
the slabs to the support wall. Since I drilled large diameter holes, I needed to use large washers to
fasten the slabs to the support walls.
STEP 19: Clad the Support Walls
I cut, sanded and stained the fence boards before screwing them onto the support wall. I clad both
sides of the support wall since I intend the bar to be used from both sides. If the bar ever needs to
be moved, I can just take off a few fence boards and release the bolts so that the slabs can be
moved individually.
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
17/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 17ttp://homemade-modern.com/ep55-concrete-bar/
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
18/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 18ttp://homemade-modern.com/ep55-concrete-bar/
7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
19/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 19ttp://homemade-modern.com/ep55-concrete-bar/
ABOUT HOMEMADE MODERN
omeMade Modern is an online design
ource that publishes easy-to-follow,
IY recipes for creating modern home
urnishings.
We provide creative ideas for making
ffordable alternatives to pricey
esigner home goods and cheap,
astic and particle-board junk.
EP64 Conference Table
May 25, 2015
EP63 Copper Tiki Torches
May 22, 2015
EP62 Little Log Chair
May 21, 2015
THE LATEST FROM HMM SUBSCRIBE TO HMM
Get email updates on our latest
projects and upcoming book release.
Email Address
Subscribe
BENS RECENT PINS
More Pins
ponsored byCopyright 2015 HomeMade Modern. All Rights Res
Good luck making your own concrete bar and please email or tweet photos to @benuyedaor
[email protected]. For more detailed instructions, dimensioned drawings and different
variations of the project, check out our soon-to-be-released book.
19LikeLike
!
399
http://pinterest.com/BenUyeda/7/21/2019 HomeMade Modern EP55 Concrete Bar.pdf
20/20
6/6/15 11:0omeMade Modern EP55 Concrete Bar
Page 20ttp://homemade modern com/ep55 concrete bar/
Top Related