8/17/2019 HiQ Catalogue Equipment Linde899 88330
1/262
HiQ®. Specialty gas program.
Equipment & gasdistribution systems.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
2/262
8/17/2019 HiQ Catalogue Equipment Linde899 88330
3/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
origami [origami] (jap., from ori ’folding' and kami 'paper'), the art of folding paper to create figures and artistic decoration.Existed in Japan already at the 9’Th century, when paper become a common material. Figures can be all from very simple to artistic and
complex. They have been used both in ceremonies and as toys, pedagogical examples, wrappings, lamp screens, etc.
Source: Encyclopedia Britannica
Equipment & gas distribution systems.HiQ® equipment and gases
Contact your Linde local sales representative for
ordering any of the specialty gas catalogues:
• Automotive
• Biotech, chemical, petrochemical
& pharmaceutical
• Indoor & outdoor environment
• Manufacturing
For more information about the HiQ® Specialty
Gas products, equipment and services program
from Linde, please visit our homepage at:
http://HiQ.Linde-Gas.com
You will find this site most useful in your every-
day work with specialty gases. Apart from the
complete program of Specialty Gas products and
equipment from Linde we have also included ex-
tensive information and supporting on-line
tools.
® ACCURA is a registered trademark of the Linde Group.
® HiQ REDLINE is a registered trademark of the Linde Group.
™ BASELINE is a trademark of the Linde Group.
® ECOCYL is a registered trademark of the Linde Group.
® HiQ is a registered trademark of the Linde Group.
™ Linde minican is a trademark of the Linde Group.
™ SECCURA is a trademark of the Linde Group.
® BUNA is a registered trademark of Bayer AG.
™ CleanLine is a trademark of BROEN A/S.® ELGILOY is a registered trademark of Elgiloy Limited Partnership.
® HASTELLOY is a registered trademark of Haynes International, Inc.
® HOGEN is a registered trademark of Distributed Energy Systems Corp.
™ IntelliSwitch is a trademark of CONCOA.
® KALREZ is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
® KEL-F is a registered trademark of 3M.
® MONEL is a registered trademark of Inco Alloys International.
® Nanochem is a registered trademark of Matheson Tri-Gas, Inc.
® NEOPRENE is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
® NITRONIC is a registered tradename of Armco, Inc.
® NYLON is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
® SIMRIZ is a registered trademark of Freudenberg-NOK.
™ STABLEFLOW is a trademark of Distributed Energy Systems Corp.
® SWAGELOK is a registered trademark of Swagelok Company.® TEFLON is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
® VCR is a registered trademark of Swagelok Company.
® VESPEL is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
® VITON is a registered trademark of E.I. DuPont de Nemours & Co., Inc.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
4/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
5/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Preface 5
Central gas supply 9HiQ® REDLINE Gas panels 15
HiQ® REDLINE Points of use 53
HiQ® REDLINE Cylinder regulators 63
The right HiQ® REDLINE choice 72
CleanLine™ 79
Quick Connect 89
BASELINE™ 101
Components 111
Special equipment 137
IntelliSwitch™ – Automatic gas management system 138
STABLEFLOW™ HCS – Hydrogen control system 140
Ultra high pressure cylinder regulator 142
High flow regulator for corrosive gases 144
Low flow cylinder regulator 146
Mini cylinder regulator 148
Safety solutions 151
Standard cabinets 152
2-valve purge gas panel 154
3-valve process gas panel 156
5-valve process gas panel 158
Operation monitor 160
Fully automatic 162
Containers 165
HiQ® specialty gas generators 171
Portable gas solutions 197Cylinder types 203
Equipment connections, tubings and fittings 209
Inlet connections 210
Outlet connections 214
Fittings 215
Tubings 215
Accessories 217
Centralized monitoring systems 218
Contact gauges & Pressure transducers 220
Mounting bracket 222
Wall mounting bracket & gas cylinder trolley 224
HiQ®
Gas Supply System Installations 227Services 231
Physical data 237
Conversion tables 250
Material compatibility 252
Index 255
Table of contents.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
6/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
7/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Preface.
In order to simplify everyday work, Linde
has created the HiQ® Specialty Gas productprogram. This contains different sections for
different industrial areas, to focus the
amount of information and concentrate on
routine use. Also, it is intended to meet the
increasing demands on quality and newapplications. This section deals with the
hardware need for gas distribution ranging
from cylinders to large gas installations.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
8/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
One of the most critical points when using gas
for analysis and high tech production, is tomaintain the integrity of the gas between cylin-
der and instrument or reactor. The quality of the
gas is often not better than the quality of the
distribution system. Therefore, it is very impor-
tant to design and plan the gas supply system
carefully.
The equipment in this catalog is divided in dif-
ferent series, the HiQ® REDLINE portfolio, the
CleanLine™ points of use and the Quick Con-
nect points of use for laboratory use, and theBASELINE™ regulators for use in chemical appli-
cations that use gases of lower purity. At the
end of this catalog are some useful checklists
for when planning and carrying through central
gas supply system installations.
• If nothing else is stated the pressure is gauge
pressure at STP (Standard Temperature and
Pressure; 273.15 K and 101,325 Pa).
• n.a. stands for not applicable, e.g., pressure
rating for a point of use that does not containany pressure restricting components.
• Linde reserve the right to make alterations to
specifications, quantities, etc., for production
or other reason, subsequent to publication.
• The information contained herein has been
prepared by qualified experts within Linde.
While we believe that the information is
General symbols
Group green central gas supply system equipment for inert and non-reactive
gases used as carrier gas or likewise, where gas integrity is non-crucial at
cylinder change.
Group blue central gas supply system equipment, with own gas purge, for
inert and nonreactive gases and gas mixtures where gas integrity is important
at cylinder change.
Group orange central gas supply system equipment, with purge gas (nitrogen
or likewise) purging, for toxic and reactive gases and gas mixtures, where gas
integrity and safety is important at cylinder change.
Preface.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
9/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
accurate within the limits of the analytical
methods employed and is complete to theextent of the specific analyses performed,
we make no warranty or representation as
to the suitability of the use of the information
for any particular purposes. The information
is offered with the understanding that any
use of the information is at the sole discretion
and risk of the user. In any case Linde’s
liability arising out of the use of the informa-
tion contained herein shall be limited by the
fee established for providing such informa-tion.
• The HiQ® codes work like this; A full code is
10 digits long (xxxxyyyzzz). For Hardware the
first four defines the Equipment (xxxx), the
following three the Equipment Outlet (yyy)
and the last three the Equipment Inlet (zzz).
When Outlet and/or Inlet are undefined these
are zeros (000). For gases the first four digits
define the Gas product (xxxx), the followingthree the Cylinder (yyy) and the last three
the Cylinder Valve (zzz). Equipment matching
a specific gas shall have the same three last
figures (zzz) where Cylinder Valve connection
and Equipment Inlet connection follow the
same standard.
Ar 10 bar
∆pN2 = 0 bar(a)
∆pN2 = 0.78 bar(a)
The driving force in diffusion is the difference in
concentration, here expressed as partial pressures.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
10/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
11/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Central gas supply.The system that gives you controlover the gas supply.
Due to their special properties, specialty gases place particular demands on components for
distribution, control and monitoring. Either because the applications require that the gasesshall maintain their high purity throughout the point of use, or because their chemical and
physical properties require special design of the central gas supply system.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
12/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
The advantages of a HiQ® REDLINE central gas
supply system are among others these:
Increased safety
• The risk of accidents is reduced, as there is no
need to handle gas cylinders inside the work
place. Only low-pressure equipment and small
gas quantities are present in the work place.
• Gas cylinders are collected under one roof,
which facilitates removal from labs and work
areas.
• The handling of high-pressure cylinders and
the connection of toxic gases should be car-ried out by trained staff. If a problem with
leaking gas should occur, ventilation is essen-
tial. This is especially important while han-
dling inflammable and toxic gases, and is
simplified by the central approach.
Improved operating economy
• A continuous gas supply to each work station
means less wasted time and fewer unplanned
disruptions for changing gas cylinders.
• Fewer and larger gas cylinders which together
supply all users, means more effective empty-
ing of the cylinders which in turn give lower
costs for gas and cylinder rental as well as
transport charges. In addition the store moni-
toring and purchasing can be centralized and
rationalized.
Better working environment
• The work place can be designed more appro-priately.
• Heavy gas cylinders containing toxic gases
under high pressure can involve great risks.
• Outlets positioned at every work station are
convenient and easy to use.
Turnkey deliveries
• Together with the customer we carry out a re-
quirement analysis. Thereafter, planning and
installation takes place.
• A service agreement guarantees a trouble-
free gas supply without unplanned operating
stoppages.
Quality requirements govern the choice of
material
The gas to be distributed and the level of con-
tamination that can be accepted in the gas de-
termine the choice of component material in a
gas supply system. The inner surface finish ofcomponents is of great importance to the final
purity of the gas at the point of use. A better
surface finish will make the pipe system easier
to clean and reduce the risk of particles being
released into the gas stream.
Central gas supply.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
13/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Copper
Copper has been used within gas supply tech-
nology for a long time and is still an option
when using industrial grade gas. Make sure
only to use cleaned copper tubing.
Stainless steel
Over the past years, stainless steel has become
the number one choice of material for pure gas
applications. This is primarily because the mate-
rial is easy to clean and can be supplied with a
very good surface finish.
The increasing use of chemically reactive gases
and the great demands made on purity havealso contributed towards this trend. Welding
methods have been developed which provide
advantages with assembly in confined areas
and which make it possible to join stainless
steel systems while still maintaining a level of
cleanliness and finish. Stainless steel is also
chosen purely for aesthetic reasons or where
the environment is aggressive and can give rise
to corrosion. As a general guide the selection of
components for a gas supply system is always
based on the chosen gas quality.
Standard purity specialty gases
(Equivalent to 2.5 [99.5%] to 6.0 [99.9999%])
Component: Stainless steel or brass depending
on the gas to be used. Threaded connectors,
type NPT or G.
Piping: Washed stainless steel.
Connection: Orbital welding compression cou-
plings, designed to clamp onto the pipe. The
coupling requires the pipe to have a good de-gree of roundness (stainless steel) and gives a
seal equivalent to 10–6 bar cm3/s.
High purity specialty gases
(Equivalent to 6.0 [99.9999] or higher)
Component: Stainless steel or brass depending
on the gas to be used. Threaded connectors,
type NPT or G.
Piping: Washed stainless steel.
Connection: VCR couplings, welded onto the
pipes and valves. Using a pointed profile that,
under a great pressure from two sides, is
pressed into metallic packing seals the cou-
plings. The coupling gives a seal equivalent to
10–8 – 10–10 bar cm3/s.
System design and start-up
System design can be broken down into
three stages:
• Determine the maximum contamination level
for the gas.
• Select the components to be used for the gas
supply system.
• Design, assemble and commission the system.
Linde has extensive know-how within the gas
industry and experience of gas media and appli-
cations – everything from component selection,
1
2
34
0.5 1.5 2.0 2.5 h1.0
50
40
30
20
10
2
ppm
O content in
the purging gas
2
The figure illustrates the relation between purge time,purging method and the purity realized with regard to
the oxygen content in a gas system.
1 = Constant flow 10 l/h
2 = 5 x pressurized/decompression ∅P 3 bar
3 = 7 x pressurized/decompression ∅P 3 bar
4 = 10 x pressurized/decompression ∅P 3 bar
8/17/2019 HiQ Catalogue Equipment Linde899 88330
14/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
via system design to installation and start-up –
as well as all technical documentation.
Linde acts as advisor and consultant together
with the user in order to assess the require-
ments and conditions of the project in question.
It is extremely important to look at the system
in its entirety, both from an economic and
safety point of view.
Highlighted below are some of the areas that
greatly affect the whole system.
Distribution and storage
• Arrange if possible a storage area for the gas
cylinders in a separate building.
• Connected gas cylinders are placed in a sepa-
rate area, preferably in adjacent to the access
area. Avoid transporting gas cylinders indoors.
• The gases are stored (separately) according to
fixed directives depending on their physical
characteristics.
• Ventilation is provided based on safety re-
quirements regarding the amount and type of
gas used.
Gas cabinets and pipe systems
• Separate gas cabinets should be considered
for corrosive gases and toxic gases.
• When using extremely dangerous gases there
is a possibility of flow control and emergency
stop functions.
• Gas pipes should be run in such a manner that
the risk of mechanical damage is eliminated
and that, as far as possible, through areas
where any leaking gas causes as little dam-
age as possible.
Detection and alarms
• The need of detection is assessed. Regard
should be taken to future requirements con-
cerning types of gas and suitable flexibility to
avoid unnecessary costs at a later stage.
• The possibility of an auto-stop if a leak is indi-
cated. This can be achieved using detection
equipment.
• The need of an alarm to an operating centre
and/or an evacuation alarm within a certainarea is defined.
Linde has well-trained assembly teams with
vast experience of specialty gas installations.
Central gas supply.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
15/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Each team has a supervisor who is responsible
for the completion of the project and at the
same time functions as an on-site contact per-
son.
Pipe and components are delivered sealed and
well packed to the assembly area.
To maintain the purity requirements and to pro-
duce a tight gas system, automatic computer
controlled pipe welding equipment is used. All
welding is carried out using internal and exter-
nal shield-gas purging, which results in clean
and bright joints.
Pressure testing according to applicable stan-
dards is carried out and a protocol is estab-
lished.
A complete system is purged clean and ana-
lyzed to determine the humidity and oxygen
content.
To guarantee that a system is tight, we carry
out a helium leak detection test. A certificate of
tightness is drawn up. Before a gas supply sys-
tem can be regarded as completed and is
handed over for start-up it is documented.
A complete set of documentation comprises:
• Layout documents (show the entire supply
systems design and positions in respective
buildings).
• System specifications including equipment
lists.
• Technical information covering all compo-
nents.
• Spare part lists.
• Pressure testing protocols.
• Analysis certificates where applicable.
• Tightness certificates where applicable.
• Operating and servicing instructions.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
16/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
17/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Group green equipment for inert and non-
reactive gases used as carrier gas or likewise,
where gas integrity is non-crucial at cylinder
change.
S 200
Group blue equipment, with own gas purge,
for inert and non-reactive gases and gas mix-
tures where gas integrity is important at cylin-
der change.
S 201
S 202
D 204
A 208
Group orange equipment, with purge gas
(nitrogen or likewise) purging, for toxic and re-active gases and gas mixtures, where gas in-
tegrity and safety is important at cylinder
change.
S 203
A 209
Gas panels are used in central gas supply
systems for reducing the high primarypressure in the cylinders to more manage-
able secondary pressures and is the place
where the cylinders are changed, etc. It can
be considered the heart of the central gas
system.
Linde has three types of gas panels: Single,
double and semi-automatic. Single panels han-
dle one cylinder or bundle at a time. When the
cylinder/bundle is empty it has to be changed.
Double panels handle two cylinders or bundles
(or a combination) at a time. When the cylinder
or bundle is empty, switchover has to be done
manually. Semi-automatic panels handle two
cylinders/bundles at a time. When the pres-
sure at one side (the primary side) reaches a
pre-set value the manifold “switches” to the
other side. This means that it is possible tochange the gas cylinders without interrupting
the gas flow. After the cylinders at the primary
side are changed the handle is turned, thus
changing the secondary side (delivering the
gas) to the new primary side.
It is possible to create a fully automatic mani-
fold, with either electric or pneumatic valves,
but since the cylinders have to be changed any-
way the cost is rarely justified.
Note: Gas panels are not supplied with cylinder
connections. For information on avail-
able cylinder connections, please contact
your local Linde representative.
HiQ® REDLINE Gas panels.The starting point.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
18/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
HiQ® REDLINE Gas panels S 200. Single gas panel.Single stage gas supply panel designed for pure gases and mixtures.
Technical data
Inlet primary pressure 230 bar 3,300 psi
Outlet pressure 0.5–6 bar 8–85 psi
2.5–14 bar 35–200 psi
2.5–50 bar 35–725 psi
10–200 bar 145–3,000 psi
Outlet gauge range –1–10 bar –14.5–145 psi
0–25 bar 0–360 psi
0–80 bar 0–1,400 psi
0–315 bar 0–4,500 psi
Operating temperature –20 – +70°C –4 – +158°F
Connection 1, 2 or 4 cylinders
Process gas in NPT 1/4” female
Process gas out NPT 1/4” female
Material
Housing Brass, Ni/Cr plated
Stainless steel 316L
Seals PVDF PCTFE
Membrane Hastelloy®
Description
Gas panel S 200 is designed for single cylinders or bundles. It is mountedon a stainless steel console and consists of a pressure regulator, inlet and
outlet pressure gauges, a relief valve and a shut-off valve for the process
gas.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
19/262
All measurements in millimeters.
Drawings of other types available on request.
~ 160 245
100
30
1 5 5
6 0
To process
Processgas inlet
3
0
6
0
9
3 6 9 12 15 18 21 23 27
Flow, Nm3/h N2
Downstream pressure, bar
* Set pressure
10 bar*
M a x f l
o w
8/17/2019 HiQ Catalogue Equipment Linde899 88330
20/262
8/17/2019 HiQ Catalogue Equipment Linde899 88330
21/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 200C contact gauge, coil and 1
cylinder
B C C1 6 85 4469
B C C1 14 200 4470
B C C1 50 725 4471
B C C1 200 3,000 4472
SS C C1 6 85 4509
SS C C1 14 200 4510
SS C C1 50 725 4511
SS C C1 200 3,000 4512
S 200C contact gauge, coil and 2
cylinders
B C C2 6 85 4473
B C C2 14 200 4474
B C C2 50 725 4475
B C C2 200 3,000 4476
SS C C2 6 85 4513
SS C C2 14 200 4514
SS C C2 50 725 4515
SS C C2 200 3,000 4516
S 200C contact gauge, coil and 4cylinders
B C C4 6 85 4477
B C C4 14 200 4478
B C C4 50 725 4479
B C C4 200 3,000 4480
SS C C4 6 85 4517
SS C C4 14 200 4518
SS C C4 50 725 4519
SS C C4 200 3,000 4520
Specifications bar psi HiQ® code
S 200C contact gauge, short flexihose
and 1 cylinder
B C SH1 6 85 4481
B C SH1 14 200 4482
B C SH1 50 725 4483
B C SH1 200 3,000 4484
SS C SH1 6 85 4521
SS C SH1 14 200 4522
SS C SH1 50 725 4523
SS C SH1 200 3,000 4524
S 200C contact gauge, short flexihose
and 2 cylinders
B C SH2 6 85 4485
B C SH2 14 200 4486
B C SH2 50 725 4487
B C SH2 200 3,000 4488
SS C SH2 6 85 4525
SS C SH2 14 200 4526
SS C SH2 50 725 4527
SS C SH2 200 3,000 4528
S 200C contact gauge, short flexihose
and 4 cylinders
B C SH4 6 85 4489
B C SH4 14 200 4490
B C SH4 50 725 4491
B C SH4 200 3,000 4492
SS C SH4 6 85 4529
SS C SH4 14 200 4530
SS C SH4 50 725 4531
SS C SH4 200 3,000 4532
Specifications bar psi HiQ® code
S 200C contact gauge,long flexihose
and 1 cylinder
B C LH1 6 85 4493
B C LH1 14 200 4494
B C LH1 50 725 4495
B C LH1 200 3,000 4496
SS C LH1 6 85 4533
SS C LH1 14 200 4534
SS C LH1 50 725 4535
SS C LH1 200 3,000 4536
S 200C contact gauge, long flexihose
and 2 cylinders
B C LH2 6 85 4497
B C LH2 14 200 4498
B C LH2 50 725 4499
B C LH2 200 3,000 4500
SS C LH2 6 85 4537
SS C LH2 14 200 4538
SS C LH2 50 725 4539
SS C LH2 200 3,000 4540
S 200C contact gauge, long flexihoseand 4 cylinders
B C LH4 6 85 4501
B C LH4 14 200 4502
B C LH4 50 725 4503
B C LH4 200 3,000 4504
SS C LH4 6 85 4541
SS C LH4 14 200 4542
SS C LH4 50 725 4543
SS C LH4 200 3,000 4544
B = Brass
SS = Stainless steel
Cx = Coil and number of cylinders
SHx = Short flexihose and number of cylinders
LHx = Long flexihose and number of cylinders
C = Contact gauge
R = Residual gas outlet
RC = Residual gas outlet and contact gauge
8/17/2019 HiQ Catalogue Equipment Linde899 88330
22/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
HiQ® REDLINE Gas panels S 201. Single gas panel.Single stage gas supply panel with internal gas purging, designed for high purity gases and mixtures (including flammable).
Technical data
Inlet primary pressure 230 bar 3,300 psi
Outlet pressure 0.5–6 bar 8–85 psi
2.5–14 bar 35–200 psi
2.5–50 bar 35–725 psi
10–200 bar 145–3,000 psi
Outlet gauge range –1–10 bar –14.5–145 psi
0–25 bar 0–360 psi
0–80 bar 0–1,400 psi
0–315 bar 0–4,500 psi
Operating temperature –20 – +70°C –4 – +158°F
Connection 1, 2 or 4 cylinders
Process gas in NPT 1/4” female
Process gas out NPT 1/4” female
Purge gas outlet NPT 1/4” female
Material
Housing Brass, Ni/Cr plated
Stainless steel 316L
Seals PVDF PCTFE
Membrane Hastelloy®
Description
Gas panel S 201 is designed for single cylinders or bundles. It is equippedwith internal gas purging to avoid contaminants entering the process line
after changing the cylinders. It is mounted on a stainless steel console
and consists of a pressure regulator, inlet and outlet pressure gauges, a
relief valve and shut-off valves for the process gas and for the purge gas.
The panel can also be equipped with contact gauge (/C models) for auto-
matic surveillance. When applicable the panel can be ordered with
residual gas line (/R models) connecting the relief valve with the purge
outlet.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
23/262
All measurements in millimeters.
Model R. Drawings of other types available on request.
~ 160 245
100
1 5 5
6 0
∅ 6
To process To ventilation
Processgas inlet
3
0
6
0
9
3 6 9 12 15 18 21 23 27
Flow, Nm3/h N2
Downstream pressure, bar
* Set pressure
10 bar*
M a x
f l o w
8/17/2019 HiQ Catalogue Equipment Linde899 88330
24/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 201
B 6 85 3415
B 14 200 3146
B 50 725 3416
B 200 3,000 3417
SS 6 85 3418
SS 14 200 3147
SS 50 725 3419
SS 200 3,000 3420
S 201 coil and 1 cylinder
B C1 6 85 3568
B C1 14 200 3569
B C1 50 725 3570
B C1 200 3,000 3571
SS C1 6 85 3640
SS C1 14 200 3641
SS C1 50 725 3642
SS C1 200 3,000 3643
S 201 coil and 2 cylinders
B C2 6 85 3572B C2 14 200 3573
B C2 50 725 3574
B C2 200 3,000 3575
SS C2 6 85 3644
SS C2 14 200 3645
SS C2 50 725 3646
SS C2 200 3,000 3647
S 201 coil and 4 cylinders
B C4 6 85 3576
B C4 14 200 3577B C4 50 725 3578
B C4 200 3,000 3579
SS C4 6 85 3648
SS C4 14 200 3649
SS C4 50 725 3650
SS C4 200 3,000 3651
Specifications bar psi HiQ® code
S 201 short flexihose and 1 cylinder
B SH1 6 85 3580
B SH1 14 200 3581
B SH1 50 725 3582
B SH1 200 3,000 3583
SS SH1 6 85 3652
SS SH1 14 200 3653
SS SH1 50 725 3654
SS SH1 200 3,000 3655
S 201 short flexihose and 2 cylinders
B SH2 6 85 3584
B SH2 14 200 3585
B SH2 50 725 3586
B SH2 200 3,000 3587
SS SH2 6 85 3656
SS SH2 14 200 3657
SS SH2 50 725 3658
SS SH2 200 3,000 3659
S 201 short flexihose and 4 cylinders
B SH4 6 85 3588B SH4 14 200 3589
B SH4 50 725 3590
B SH4 200 3,000 3591
SS SH4 6 85 3660
SS SH4 14 200 3661
SS SH4 50 725 3662
SS SH4 200 3,000 3663
S 201 long flexihose and 1 cylinder
B LH1 6 85 3592
B LH1 14 200 3593B LH1 50 725 3594
B LH1 200 3,000 3595
SS LH1 6 85 3664
SS LH1 14 200 3665
SS LH1 50 725 3666
SS LH1 200 3,000 3667
Specifications bar psi HiQ® code
S 201 long flexihose and 2 cylinder
B LH2 6 85 3596
B LH2 14 200 3597
B LH2 50 725 3598
B LH2 200 3,000 3599
SS LH2 6 85 3668
SS LH2 14 200 3669
SS LH2 50 725 3670
SS LH2 200 3,000 3671
S 201 long flexihose and 4 cylinders
B LH4 6 85 3600
B LH4 14 200 3601
B LH4 50 725 3602
B LH4 200 3,000 3603
SS LH4 6 85 3672
SS LH4 14 200 3673
SS LH4 50 725 3674
SS LH4 200 3,000 3675
S 201/R residual gas outlet
B R 6 85 3471B R 14 200 3472
B R 50 725 3473
B R 200 3,000 3474
SS R 6 85 3475
SS R 14 200 3476
SS R 50 725 3477
SS R 200 3,000 3478
SS R C1 200 3,000 3679
Gas panels S 201. Product names and codes.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
25/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 201/R residual gas outlet, coil and
1 cylinder
B R C1 6 85 3604
B R C1 14 200 3605
B R C1 50 725 3606
B R C1 200 3,000 3607
SS R C1 6 85 3676
SS R C1 14 200 3677
SS R C1 50 725 3678
S 201/R residual gas outlet, coil and
2 cylinders
B R C2 6 85 3608
B R C2 14 200 3609
B R C2 50 725 3610
B R C2 200 3,000 3611
SS R C2 6 85 3680
SS R C2 14 200 3681
SS R C2 50 725 3682
SS R C2 200 3,000 3683
S 201/R residual gas outlet, coil and
4 cylinders
B R C4 6 85 3612
B R C4 14 200 3613
B R C4 50 725 3614
B R C4 200 3,000 3615
SS R C4 6 85 3684
SS R C4 14 200 3685
SS R C4 50 725 3686
SS R C4 200 3,000 3687
Specifications bar psi HiQ® code
S 201/R residual gas outlet, short
flexihose and 1 cylinder
B R SH1 6 85 3616
B R SH1 14 200 3617
B R SH1 50 725 3618
B R SH1 200 3,000 3619
SS R SH1 6 85 3688
SS R SH1 14 200 3689
SS R SH1 50 725 3690
SS R SH1 200 3,000 3691
S 201/R residual gas outlet, short
flexihose and 2 cylinders
B R SH2 6 85 3620
B R SH2 14 200 3621
B R SH2 50 725 3622
B R SH2 200 3,000 3623
SS R SH2 6 85 3692
SS R SH2 14 200 3693
SS R SH2 50 725 3694
SS R SH2 200 3,000 3695
S 201/R residual gas outlet, shortflexihose and 4 cylinders
B R SH4 6 85 3624
B R SH4 14 200 3625
B R SH4 50 725 3626
B R SH4 200 3,000 3627
SS R SH4 6 85 3696
SS R SH4 14 200 3697
SS R SH4 50 725 3698
SS R SH4 200 3,000 3699
Specifications bar psi HiQ® code
S 201/R residual gas outlet, long
flexihose and 1 cylinder
B R LH1 6 85 3628
B R LH1 14 200 3629
B R LH1 50 725 3630
B R LH1 200 3,000 3631
SS R LH1 6 85 3700
SS R LH1 14 200 3701
SS R LH1 50 725 3702
SS R LH1 200 3,000 3703
S 201/R residual gas outlet, long
flexihose and 2 cylinders
B R LH2 6 85 3632
B R LH2 14 200 3633
B R LH2 50 725 3634
B R LH2 200 3,000 3635
SS R LH2 6 85 3704
SS R LH2 14 200 3705
SS R LH2 50 725 3706
SS R LH2 200 3,000 3707
S 201/R residual gas outlet, long
flexihose and 4 cylinders
B R LH4 6 85 3636
B R LH4 14 200 3637
B R LH4 50 725 3638
B R LH4 200 3,000 3639
SS R LH4 6 85 3708
SS R LH4 14 200 3709
SS R LH4 50 725 3710
SS R LH4 200 3,000 3711
B = Brass
SS = Stainless steel
Cx = Coil and number of cylinders
SHx = Short flexihose and number of cylinders
LHx = Long flexihose and number of cylinders
C = Contact gauge
R = Residual gas outlet
RC = Residual gas outlet and contact gauge
8/17/2019 HiQ Catalogue Equipment Linde899 88330
26/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 201/C contact gauge
B C 6 85 4545
B C 14 200 4546
B C 50 725 4547
B C 200 3,000 4548
SS C 6 85 4625
SS C 14 200 4626
SS C 50 725 4627
SS C 200 3,000 4628
S 201/C contact gauge, coil and 1cylinder
B C C1 6 85 4549
B C C1 14 200 4550
B C C1 50 725 4551
B C C1 200 3,000 4552
SS C C1 6 85 4629
SS C C1 14 200 4630
SS C C1 50 725 4631
SS C C1 200 3,000 4632
S 201/C contact gauge, coil and 2
cylinders
B C C2 6 85 4553
B C C2 14 200 4554
B C C2 50 725 4555
B C C2 200 3,000 4556
SS C C2 6 85 4633
SS C C2 14 200 4634
SS C C2 50 725 4635
SS C C2 200 3,000 4636
S 201/C contact gauge, coil and 4
cylinders
B C C4 6 85 4557
B C C4 14 200 4558
B C C4 50 725 4559
B C C4 200 3,000 4560
SS C C4 6 85 4637
Specifications bar psi HiQ® code
SS C C4 14 200 4638
SS C C4 50 725 4639
SS C C4 200 3,000 4640
S 201/C contact gauge, short
flexihose and 1 cylinder
B C SH1 6 85 4561
B C SH1 14 200 4562
B C SH1 50 725 4563
B C SH1 200 3,000 4564
SS C SH1 6 85 4641
SS C SH1 14 200 4642
SS C SH1 50 725 4643
SS C SH1 200 3,000 4644
S 201/C contact gauge, short
flexihose and 2 cylinders
B C SH2 6 85 4565
B C SH2 14 200 4566
B C SH2 50 725 4567
B C SH2 200 3,000 4568
SS C SH2 6 85 4645
SS C SH2 14 200 4646SS C SH2 50 725 4647
SS C SH2 200 3,000 4648
S 201/C contact gauge, short
flexihose and 4 cylinders
B C SH4 6 85 4569
B C SH4 14 200 4570
B C SH4 50 725 4571
B C SH4 200 3,000 4572
SS C SH4 6 85 4649
SS C SH4 14 200 4650
SS C SH4 50 725 4651SS C SH4 200 3,000 4652
Specifications bar psi HiQ® code
S 201/C contact gauge, long
flexihose and 1 cylinder
B C LH1 6 85 4573
B C LH1 14 200 4574
B C LH1 50 725 4575
B C LH1 200 3,000 4576
SS C LH1 6 85 4653
SS C LH1 14 200 4654
SS C LH1 50 725 4655
SS C LH1 200 3,000 4656
S 201/C contact gauge, longflexihose and 2 cylinders
B C LH2 6 85 4577
B C LH2 14 200 4578
B C LH2 50 725 4579
B C LH2 200 3,000 4580
SS C LH2 6 85 4657
SS C LH2 14 200 4658
SS C LH2 50 725 4659
SS C LH2 200 3,000 4660
S 201/C contact gauge, long
flexihose and 4 cylinders
B C LH4 6 85 4581
B C LH4 14 200 4582
B C LH4 50 725 4583
B C LH4 200 3,000 4584
SS C LH4 6 85 4661
SS C LH4 14 200 4662
SS C LH4 50 725 4663
SS C LH4 200 3,000 4664
Gas panels S 201. Product names and codes.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
27/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 201/RC residual gas outlet, contact
gauge
B RC 6 85 4585
B RC 14 200 4586
B RC 50 725 4587
B RC 200 3,000 4588
SS RC 6 85 4665
SS RC 14 200 4666
SS RC 50 725 4667
SS RC 200 3,000 4668
S 201/RC residual gas outlet, contact
gauge, coil and 1 cylinder
B RC C1 6 85 4589
B RC C1 14 200 4590
B RC C1 50 725 4591
B RC C1 200 3,000 4592
SS RC C1 6 85 4669
SS RC C1 14 200 4670
SS RC C1 50 725 4671
SS RC C1 200 3,000 4672
S 201/RC residual gas outlet, contactgauge, coil and 2 cylinders
B RC C2 6 85 4593
B RC C2 14 200 4594
B RC C2 50 725 4595
B RC C2 200 3,000 4596
SS RC C2 6 85 4673
SS RC C2 14 200 4674
SS RC C2 50 725 4675
SS RC C2 200 3,000 4676
S 201/RC residual gas outlet, contactgauge, coil and 4 cylinders
B RC C4 6 85 4597
B RC C4 14 200 4598
B RC C4 50 725 4599
Specifications bar psi HiQ® code
B RC C4 200 3,000 4600SS RC C4 6 85 4677
SS RC C4 14 200 4678
SS RC C4 50 725 4679
SS RC C4 200 3,000 4680
S 201/RC residual gas outlet, contact
gauge, short flexihose and 1 cylinder
B RC SH1 6 85 4601
B RC SH1 14 200 4602
B RC SH1 50 725 4603
B RC SH1 200 3,000 4604
SS RC SH1 6 85 4681
SS RC SH1 14 200 4682
SS RC SH1 50 725 4683
SS RC SH1 200 3,000 4684
S 201/RC residual gas outlet, contact
gauge, short flexihose and 2
cylinders
B RC SH2 6 85 4605
B RC SH2 14 200 4606
B RC SH2 50 725 4607
B RC SH2 200 3,000 4608
SS RC SH2 6 85 4685SS RC SH2 14 200 4686
SS RC SH2 50 725 4687
SS RC SH2 200 3,000 4688
S 201/RC residual gas outlet, contact
gauge, short flexihose and 4 cylinders
B RC SH4 6 85 4609
B RC SH4 14 200 4610
B RC SH4 50 725 4611
B RC SH4 200 3,000 4612
SS RC SH4 6 85 4689SS RC SH4 14 200 4690
SS RC SH4 50 725 4691
SS RC SH4 200 3,000 4692
Specifications bar psi HiQ® code
S 201/RC residual gas outlet, contact
gauge, long flexihose and 1 cylinder
B RC LH1 6 85 4613
B RC LH1 14 200 4614
B RC LH1 50 725 4615
B RC LH1 200 3,000 4616
SS RC LH1 6 85 4693
SS RC LH1 14 200 4694
SS RC LH1 50 725 4695
SS RC LH1 200 3,000 4696
S 201/RC residual gas outlet, contact
gauge, long flexihose and 2 cylinders
B RC LH2 6 85 4617
B RC LH2 14 200 4618
B RC LH2 50 725 4619
B RC LH2 200 3,000 4620
SS RC LH2 6 85 4697
SS RC LH2 14 200 4698
SS RC LH2 50 725 4699
SS RC LH2 200 3,000 4700
S 201/RC residual gas outlet, contactgauge, long flexihose and 4 cylinders
B RC LH4 6 85 4621
B RC LH4 14 200 4622
B RC LH4 50 725 4623
B RC LH4 200 3,000 4624
SS RC LH4 6 85 4701
SS RC LH4 14 200 4702
SS RC LH4 50 725 4703
SS RC LH4 200 3,000 4704
B = Brass
SS = Stainless steel
Cx = Coil and number of cylinders
SHx = Short flexihose and number of cylinders
LHx = Long flexihose and number of cylinders
C = Contact gauge
R = Residual gas outlet
RC = Residual gas outlet and contact gauge
8/17/2019 HiQ Catalogue Equipment Linde899 88330
28/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
HiQ® REDLINE Gas panels S 202. Single gas panel.Single stage gas supply panel with internal gas purging, designed for pure gases and mixtures.
Technical data
Inlet primary pressure 230 bar 3,300 psi
Outlet pressure 0.5–6 bar 8–85 psi
2.5–14 bar 35–200 psi
2.5–50 bar 35–725 psi
10–200 bar 145–3,000 psi
Outlet gauge range –1–10 bar –14.5–145 psi
0–25 bar 0–360 psi
0–80 bar 0–1,400 psi
0–315 bar 0–4,500 psi
Operating temperature –20 – +70°C –4 – +158°F
Connection 1, 2 or 4 cylinders
Process gas in NPT 1/4” female
Process gas out NPT 1/4” female
Purge gas outlet NPT 1/4” female
Material
Housing Brass, Ni/Cr plated
Stainless steel 316L
Seals PVDF PCTFE
Membrane Hastelloy®
Description
Gas panel S 202 is designed for single cylinders or bundles. It is equippedwith internal gas purging to avoid contaminants entering the process line
after changing the cylinders. It is is mounted on a stainless steel console
and consists of a pressure regulator, inlet and outlet pressure gauges, a
relief valve and shut-off valves for the process gas at high and low pres-
sure ends and for the purging gas.
The panel can also be equipped with contact gauge (/C models) for auto-
matic surveillance. When applicable the panel can be ordered with resid-
ual gas line (/R models) connecting the relief valve with the purge
outlet.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
29/262
All measurements in millimeters.
Model R. Drawings of other types available on request.
~ 160
30
245
100
1 5 5
6 0
To process To ventilation
Processgas inlet
3
0
6
0
9
3 6 9 12 15 18 21 23 27
Flow, Nm3/h N2
Downstream pressure, bar
* Set pressure
10 bar*
M a x f
l o w
8/17/2019 HiQ Catalogue Equipment Linde899 88330
30/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 202
B 6 85 3421
B 14 200 3148
B 50 725 3422
B 200 3,000 3423
SS 6 85 3424
SS 14 200 3149
SS 50 725 3425
SS 200 3,000 3426
S 202 coil and 1 cylinder
B C1 6 85 3712
B C1 14 200 3713
B C1 50 725 3714
B C1 200 3,000 3715
SS C1 6 85 3784
SS C1 14 200 3785
SS C1 50 725 3786
SS C1 200 3,000 3787
S 202 coil and 2 cylinders
B C2 6 85 3716B C2 14 200 3717
B C2 50 725 3718
B C2 200 3,000 3719
SS C2 6 85 3788
SS C2 14 200 3789
SS C2 50 725 3790
SS C2 200 3,000 3791
S 202 coil and 4 cylinders
B C4 6 85 3720
B C4 14 200 3721B C4 50 725 3722
B C4 200 3,000 3723
SS C4 6 85 3792
SS C4 14 200 3793
SS C4 50 725 3794
SS C4 200 3,000 3795
Specifications bar psi HiQ® code
S 202 short flexihose and 1 cylinder
B SH1 6 85 3724
B SH1 14 200 3725
B SH1 50 725 3726
B SH1 200 3,000 3727
SS SH1 6 85 3796
SS SH1 14 200 3797
SS SH1 50 725 3798
SS SH1 200 3,000 3799
S 202 short flexihose and 2 cylinders
B SH2 6 85 3728
B SH2 14 200 3729
B SH2 50 725 3730
B SH2 200 3,000 3731
SS SH2 6 85 3800
SS SH2 14 200 3801
SS SH2 50 725 3802
SS SH2 200 3,000 3803
S 202 short flexihose and 4 cylinders
B SH4 6 85 3732B SH4 14 200 3733
B SH4 50 725 3734
B SH4 200 3,000 3735
SS SH4 6 85 3804
SS SH4 14 200 3805
SS SH4 50 725 3806
SS SH4 200 3,000 3807
S 202 long flexihose and 1 cylinder
B LH1 6 85 3736
B LH1 14 200 3737B LH1 50 725 3738
B LH1 200 3,000 3739
SS LH1 6 85 3808
SS LH1 14 200 3809
SS LH1 50 725 3810
SS LH1 200 3,000 3811
Specifications bar psi HiQ® code
S 202 long flexihose and 2 cylinders
B LH2 6 85 3740
B LH2 14 200 3741
B LH2 50 725 3742
B LH2 200 3,000 3743
SS LH2 6 85 3812
SS LH2 14 200 3813
SS LH2 50 725 3814
SS LH1 200 3,000 3815
S 202 long flexihose and 4 cylinders
B LH4 6 85 3744
B LH4 14 200 3745
B LH4 50 725 3746
B LH4 200 3,000 3747
SS LH4 6 85 3816
SS LH4 14 200 3817
SS LH4 50 725 3818
SS LH4 200 3,000 3819
S 202/R residual gas outlet
B R 6 85 3479B R 14 200 3480
B R 50 725 3481
B R 200 3,000 3482
SS R 6 85 3483
SS R 14 200 3484
SS R 50 725 3485
SS R 200 3,000 3486
Gas panels S 202. Product names and codes.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
31/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 202/R residual gas outlet, coil and
1 cylinder
B R C1 6 85 3748
B R C1 14 200 3749
B R C1 50 725 3750
B R C1 200 3,000 3751
SS R C1 6 85 3820
SS R C1 14 200 3821
SS R C1 50 725 3822
SS R C1 200 3,000 3823
S 202/R residual gas outlet, coil and
2 cylinders
B R C2 6 85 3752
B R C2 14 200 3753
B R C2 50 725 3754
B R C2 200 3,000 3755
SS R C2 6 85 3824
SS R C2 14 200 3825
SS R C2 50 725 3826
SS R C2 200 3,000 3827
S 202/R residual gas outlet, coil and4 cylinders
B R C4 6 85 3756
B R C4 14 200 3757
B R C4 50 725 3758
B R C4 200 3,000 3759
SS R C4 6 85 3828
SS R C4 14 200 3829
SS R C4 50 725 3830
SS R C4 200 3,000 3831
S 202/R residual gas outlet, shortflexihose and 1 cylinder
B R SH1 6 85 3760
B R SH1 14 200 3761
B R SH1 50 725 3762
B R SH1 200 3,000 3763
Specifications bar psi HiQ® code
SS R SH1 6 85 3832
SS R SH1 14 200 3833
SS R SH1 50 725 3834
SS R SH1 200 3,000 3835
S 202/R residual gas outlet, short
flexihose and 2 cylinders
B R SH2 6 85 3764
B R SH2 14 200 3765
B R SH2 50 725 3766
B R SH2 200 3,000 3767
SS R SH2 6 85 3836
SS R SH2 14 200 3837
SS R SH2 50 725 3838
SS R SH2 200 3,000 3839
S 202/R residual gas outlet, short
flexihose and 4 cylinders
B R SH4 6 85 3768
B R SH4 14 200 3769
B R SH4 50 725 3770
B R SH4 200 3,000 3771
SS R SH4 6 85 3840SS R SH4 14 200 3841
SS R SH4 50 725 3842
SS R SH4 200 3,000 3843
S 202/R residual gas outlet, long
flexihose and 1 cylinder
B R LH1 6 85 3772
B R LH1 14 200 3773
B R LH1 50 725 3774
B R LH1 200 3,000 3775
SS R LH1 6 85 3844SS R LH1 14 200 3845
SS R LH1 50 725 3846
SS R LH1 200 3,000 3847
Specifications bar psi HiQ® code
S 202/R residual gas outlet, long
flexihose and 2 cylinders
B R LH2 6 85 3776
B R LH2 14 200 3777
B R LH2 50 725 3778
B R LH2 200 3,000 3779
SS R LH2 6 85 3848
SS R LH2 14 200 3849
SS R LH2 50 725 3850
SS R LH2 200 3,000 3851
S 202/R residual gas outlet, long
flexihose and 4 cylinders
B R LH4 6 85 3780
B R LH4 14 200 3781
B R LH4 50 725 3782
B R LH4 200 3,000 3783
SS R LH4 6 85 3852
SS R LH4 14 200 3853
SS R LH4 50 725 3854
SS R LH4 200 3,000 3855
S 202/C contact gauge
B C 6 85 4705
B C 14 200 4706
B C 50 725 4707
B C 200 3,000 4708
SS C 6 85 4785
SS C 14 200 4786
SS C 50 725 4787
SS C 200 3,000 4788
B = Brass
SS = Stainless steel
Cx = Coil and number of cylinders
SHx = Short flexihose and number of cylinders
LHx = Long flexihose and number of cylinders
C = Contact gauge
R = Residual gas outlet
RC = Residual gas outlet and contact gauge
8/17/2019 HiQ Catalogue Equipment Linde899 88330
32/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 202/C contact gauge, coil and 1
cylinder
B C C1 6 85 4709
B C C1 14 200 4710
B C C1 50 725 4711
B C C1 200 3,000 4712
SS C C1 6 85 4789
SS C C1 14 200 4790
SS C C1 50 725 4791
SS C C1 200 3,000 4792
S 202/C contact gauge, coil and 2
cylinders
B C C2 6 85 4713
B C C2 14 200 4714
B C C2 50 725 4715
B C C2 200 3,000 4716
SS C C2 6 85 4793
SS C C2 14 200 4794
SS C C2 50 725 4795
SS C C2 200 3,000 4796
S 202/C contact gauge, coil and 4cylinders
B C C4 6 85 4717
B C C4 14 200 4718
B C C4 50 725 4719
B C C4 200 3,000 4720
SS C C4 6 85 4797
SS C C4 14 200 4798
SS C C4 50 725 4799
SS C C4 200 3,000 4800
S 202/C contact gauge, shortflexihose and 1 cylinder
B C SH1 6 85 4721
B C SH1 14 200 4722
B C SH1 50 725 4723
B C SH1 200 3,000 4724
Specifications bar psi HiQ® code
SS C SH1 6 85 4801
SS C SH1 14 200 4802
SS C SH1 50 725 4803
SS C SH1 200 3,000 4804
S 202/C contact gauge, short
flexihose and 2 cylinders
B C SH2 6 85 4725
B C SH2 14 200 4726
B C SH2 50 725 4727
B C SH2 200 3,000 4728
SS C SH2 6 85 4805
SS C SH2 14 200 4806
SS C SH2 50 725 4807
SS C SH2 200 3,000 4808
S 202/C contact gauge, short
flexihose and 4 cylinders
B C SH4 6 85 4729
B C SH4 14 200 4730
B C SH4 50 725 4731
B C SH4 200 3,000 4732
SS C SH4 6 85 4809SS C SH4 14 200 4810
SS C SH4 50 725 4811
SS C SH4 200 3,000 4812
S 202/C contact gauge, long
flexihose and 1 cylinder
B C LH1 6 85 4733
B C LH1 14 200 4734
B C LH1 50 725 4735
B C LH1 200 3,000 4736
SS C LH1 6 85 4813SS C LH1 14 200 4814
SS C LH1 50 725 4815
SS C LH1 200 3,000 4816
Specifications bar psi HiQ® code
S 202/C contact gauge, long
flexihose and 2 cylinders
B C LH2 6 85 4737
B C LH2 14 200 4738
B C LH2 50 725 4739
B C LH2 200 3,000 4740
SS C LH2 6 85 4817
SS C LH2 14 200 4818
SS C LH2 50 725 4819
SS C LH2 200 3,000 4820
S 202/C contact gauge, long
flexihose and 4 cylinders
B C LH4 6 85 4741
B C LH4 14 200 4742
B C LH4 50 725 4743
B C LH4 200 3,000 4744
SS C LH4 6 85 4821
SS C LH4 14 200 4822
SS C LH4 50 725 4823
SS C LH4 200 3,000 4824
S 202/RC residual gas outlet,contactgauge
B RC 6 85 4745
B RC 14 200 4746
B RC 50 725 4747
B RC 200 3,000 4748
SS RC 6 85 4825
SS RC 14 200 4826
SS RC 50 725 4827
SS RC 200 3,000 4828
Gas panels S 202. Product names and codes.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
33/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 202/RC residual gas outlet, contact
gauge, coil and 1 cylinder
B RC C1 6 85 4749
B RC C1 14 200 4750
B RC C1 50 725 4751
B RC C1 200 3,000 4752
SS RC C1 6 85 4829
SS RC C1 14 200 4830
SS RC C1 50 725 4831
SS RC C1 200 3,000 4832
S 202/RC residual gas outlet, contact
gauge, coil and 2 cylinders
B RC C2 6 85 4753
B RC C2 14 200 4754
B RC C2 50 725 4755
B RC C2 200 3,000 4756
SS RC C2 6 85 4833
SS RC C2 14 200 4834
SS RC C2 50 725 4835
SS RC C2 200 3,000 4836
S 202/RC residual gas outlet, contactgauge, coil and 4 cylinders
B RC C4 6 85 4757
B RC C4 14 200 4758
B RC C4 50 725 4759
B RC C4 200 3,000 4760
SS RC C4 6 85 4837
SS RC C4 14 200 4838
SS RC C4 50 725 4839
SS RC C4 200 3,000 4840
Specifications bar psi HiQ® code
S 202/RC residual gas outlet, contact
gauge, short flexihose and 1 cylinder
B RC SH1 6 85 4761
B RC SH1 14 200 4762
B RC SH1 50 725 4763
B RC SH1 200 3,000 4764
SS RC SH1 6 85 4841
SS RC SH1 14 200 4842
SS RC SH1 50 725 4843
SS RC SH1 200 3,000 4844
S 202/RC residual gas outlet, contact
gauge, short flexihose and 2 cylinders
B RC SH2 6 85 4765
B RC SH2 14 200 4766
B RC SH2 50 725 4767
B RC SH2 200 3,000 4768
SS RC SH2 6 85 4845
SS RC SH2 14 200 4846
SS RC SH2 50 725 4847
SS RC SH2 200 3,000 4848
S 202/RC residual gas outlet, contactgauge, short flexihose and 4 cylinders
B RC SH4 6 85 4769
B RC SH4 14 200 4770
B RC SH4 50 725 4771
B RC SH4 200 3,000 4772
SS RC SH4 6 85 4849
SS RC SH4 14 200 4850
SS RC SH4 50 725 4851
SS RC SH4 200 3,000 4852
Specifications bar psi HiQ® code
S 202/RC residual gas outlet, contact
gauge, long flexihose and 1 cylinder
B RC LH1 6 85 4773
B RC LH1 14 200 4774
B RC LH1 50 725 4775
B RC LH1 200 3,000 4776
SS RC LH1 6 85 4853
SS RC LH1 14 200 4854
SS RC LH1 50 725 4855
SS RC LH1 200 3,000 4856
S 202/RC residual gas outlet, contact
gauge, long flexihose and 2 cylinders
B RC LH2 6 85 4777
B RC LH2 14 200 4778
B RC LH2 50 725 4779
B RC LH2 200 3,000 4780
SS RC LH2 6 85 4857
SS RC LH2 14 200 4858
SS RC LH2 50 725 4859
SS RC LH2 200 3,000 4860
S 202/RC residual gas outlet, contactgauge, long flexihose and 4 cylinder
B RC LH4 6 85 4781
B RC LH4 14 200 4782
B RC LH4 50 725 4783
B RC LH4 200 3,000 4784
SS RC LH4 6 85 4861
SS RC LH4 14 200 4862
SS RC LH4 50 725 4863
SS RC LH4 200 3,000 4864
B = Brass
SS = Stainless steel
Cx = Coil and number of cylinders
SHx = Short flexihose and number of cylinders
LHx = Long flexihose and number of cylinders
C = Contact gauge
R = Residual gas outlet
RC = Residual gas outlet and contact gauge
8/17/2019 HiQ Catalogue Equipment Linde899 88330
34/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
HiQ® REDLINE Gas panels S 203. Single gas panel.Single stage gas supply panel with external gas purging, designed for reactive, toxic and corrosive gases.
Technical data
Inlet primary pressure 230 bar 3,300 psi
Outlet pressure 0.5–6 bar 8–85 psi
2.5–14 bar 35–200 psi
2.5–50 bar 35–725 psi
10–200 bar 145–3,000 psi
Outlet gauge range –1–10 bar –14.5–145 psi
0–25 bar 0–360 psi
0–80 bar 0–1,400 psi
0–315 bar 0–4,500 psi
Operating temperature –20 – +70°C –4 – +158°F
Connection 1, 2 or 4 cylinders
Process gas in NPT 1/4” female
Process gas out NPT 1/4” female
Purge gas inlet Tube fitting 6 mm
Purge gas outlet Tube fitting 6 mm
Material
Housing Brass, Ni/Cr plated
Stainless steel 316L
Seals PVDF PCTFE
Membrane Hastelloy®
Description
Gas panel S 203 is designed for single cylinders or bundles. It is equippedwith external gas purging to allow purging of the high pressure side be-
fore disconnecting cylinders. It is is mounted on a stainless steel console
and consists of a pressure regulator, inlet and outlet pressure gauges, a
relief valve and shut-off valves for the process gas at high and low pres-
sure ends and for the purging gas.
The panel can also be equipped with contact gauge (/C models) for auto-
matic surveillance. When applicable the panel can be ordered with resid-
ual gas line (/R models) connecting the relief valve with the purge outlet.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
35/262
8/17/2019 HiQ Catalogue Equipment Linde899 88330
36/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 203
B 6 85 3427
B 14 200 3150
B 50 725 3428
B 200 3,000 3429
SS 6 85 3430
SS 14 200 3151
SS 50 725 3431
SS 200 3,000 3432
S 203 coil and 1 cylinder
B C1 6 85 3856
B C1 14 200 3857
B C1 50 725 3858
B C1 200 3,000 3859
SS C1 6 85 3892
SS C1 14 200 3893
SS C1 50 725 3894
SS C1 200 3,000 3895
S 203 coil and 2 cylinders
B C2 6 85 3860B C2 14 200 3861
B C2 50 725 3862
B C2 200 3,000 3863
SS C2 6 85 3896
SS C2 14 200 3897
SS C2 50 725 3898
SS C2 200 3,000 3899
S 203 coil and 4 cylinders
B C4 6 85 3864
B C4 14 200 3865B C4 50 725 3866
B C4 200 3,000 3867
SS C4 6 85 3900
SS C4 14 200 3901
SS C4 50 725 3902
SS C4 200 3,000 3903
Specifications bar psi HiQ® code
S 203 short flexihose and 1 cylinder
B SH1 6 85 3868
B SH1 14 200 3869
B SH1 50 725 3870
B SH1 200 3,000 3871
SS SH1 6 85 3904
SS SH1 14 200 3905
SS SH1 50 725 3906
SS SH1 200 3,000 3907
S 203 short flexihose and 2 cylinders
B SH2 6 85 3872
B SH2 14 200 3873
B SH2 50 725 3874
B SH2 200 3,000 3875
SS SH2 6 85 3908
SS SH2 14 200 3909
SS SH2 50 725 3910
SS SH2 200 3,000 3911
S 203 short flexihose and 4 cylinders
B SH4 6 85 3876B SH4 14 200 3877
B SH4 50 725 3878
B SH4 200 3,000 3879
SS SH4 6 85 3912
SS SH4 14 200 3913
SS SH4 50 725 3914
SS SH4 200 3,000 3915
S 203 long flexihose and 1 cylinder
B LH1 6 85 3880
B LH1 14 200 3881B LH1 50 725 3882
B LH1 200 3,000 3883
SS LH1 6 85 3916
SS LH1 14 200 3917
SS LH1 50 725 3918
SS LH1 200 3,000 3919
Specifications bar psi HiQ® code
S 203 long flexihose and 2 cylinders
B LH2 6 85 3884
B LH2 14 200 3885
B LH2 50 725 3886
B LH2 200 3,000 3887
SS LH2 6 85 3920
SS LH2 14 200 3921
SS LH2 50 725 3922
SS LH2 200 3,000 3923
S 203 long flexihose and 4 cylinders
B LH4 6 85 3888
B LH4 14 200 3889
B LH4 50 725 3890
B LH4 200 3,000 3891
SS LH4 6 85 3924
SS LH4 14 200 3925
SS LH4 50 725 3926
SS LH4 200 3,000 3927
S 203/R residual gas outlet
B R 6 85 4865B R 14 200 4866
B R 50 725 4867
B R 200 3,000 4868
SS R 6 85 4985
SS R 14 200 4986
SS R 50 725 4987
SS R 200 3,000 4988
Gas panels S 203. Product names and codes.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
37/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 203/R residual gas outlet, coil and
1 cylinder
B R C1 6 85 4869
B R C1 14 200 4870
B R C1 50 725 4871
B R C1 200 3,000 4872
SS R C1 6 85 4989
SS R C1 14 200 4990
SS R C1 50 725 4991
SS R C1 200 3,000 4992
S 203/R residual gas outlet, coil and
2 cylinders
B R C2 6 85 4873
B R C2 14 200 4874
B R C2 50 725 4875
B R C2 200 3,000 4876
SS R C2 6 85 4993
SS R C2 14 200 4994
SS R C2 50 725 4995
SS R C2 200 3,000 4996
S 203/R residual gas outlet, coil and4 cylinders
B R C4 6 85 4877
B R C4 14 200 4878
B R C4 50 725 4879
B R C4 200 3,000 4880
SS R C4 6 85 4997
SS R C4 14 200 4998
SS R C4 50 725 4999
SS R C4 200 3,000 5000
S 203/R residual gas outlet, shortflexihose and 1 cylinder
B R SH1 6 85 4881
B R SH1 14 200 4882
B R SH1 50 725 4883
B R SH1 200 3,000 4884
Specifications bar psi HiQ® code
SS R SH1 6 85 5001
SS R SH1 14 200 5002
SS R SH1 50 725 5003
SS R SH1 200 3,000 5004
S 203/R residual gas outlet, short
flexihose and 2 cylinders
B R SH2 6 85 4885
B R SH2 14 200 4886
B R SH2 50 725 4887
B R SH2 200 3,000 4888
SS R SH2 6 85 5005
SS R SH2 14 200 5006
SS R SH2 50 725 5007
SS R SH2 200 3,000 5008
S 203/R residual gas outlet, short
flexihose and 4 cylinders
B R SH4 6 85 4889
B R SH4 14 200 4890
B R SH4 50 725 4891
B R SH4 200 3,000 4892
SS R SH4 6 85 5009SS R SH4 14 200 5010
SS R SH4 50 725 5011
SS R SH4 200 3,000 5012
S 203/R residual gas outlet, long
flexihose and 1 cylinder
B R LH1 6 85 4893
B R LH1 14 200 4894
B R LH1 50 725 4895
B R LH1 200 3,000 4896
SS R LH1 6 85 5013SS R LH1 14 200 5014
SS R LH1 50 725 5015
SS R LH1 200 3,000 5016
Specifications bar psi HiQ® code
S 203/R residual gas outlet, long
flexihose and 2 cylinders
B R LH2 6 85 4897
B R LH2 14 200 4898
B R LH2 50 725 4899
B R LH2 200 3,000 4900
SS R LH2 6 85 5017
SS R LH2 14 200 5018
SS R LH2 50 725 5019
SS R LH2 200 3,000 5020
S 203/R residual gas outlet, long
flexihose and 4 cylinders
B R LH4 6 85 4901
B R LH4 14 200 4902
B R LH4 50 725 4903
B R LH4 200 3,000 4904
SS R LH4 6 85 5021
SS R LH4 14 200 5022
SS R LH4 50 725 5023
SS R LH4 200 3,000 5024
S 203/C contact gauge
B C 6 85 4905
B C 14 200 4906
B C 50 725 4907
B C 200 3,000 4908
SS C 6 85 5025
SS C 14 200 5026
SS C 50 725 5027
SS C 200 3,000 5028
B = Brass
SS = Stainless steel
Cx = Coil and number of cylinders
SHx = Short flexihose and number of cylinders
LHx = Long flexihose and number of cylinders
C = Contact gauge
R = Residual gas outlet
RC = Residual gas outlet and contact gauge
8/17/2019 HiQ Catalogue Equipment Linde899 88330
38/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 203/C contact gauge, coil and 1
cylinder
B C C1 6 85 4909
B C C1 14 200 4910
B C C1 50 725 4911
B C C1 200 3,000 4912
SS C C1 6 85 5029
SS C C1 14 200 5030
SS C C1 50 725 5031
SS C C1 200 3,000 5032
S 203/C contact gauge, coil and 2
cylinders
B C C2 6 85 4913
B C C2 14 200 4914
B C C2 50 725 4915
B C C2 200 3,000 4916
SS C C2 6 85 5033
SS C C2 14 200 5034
SS C C2 50 725 5035
SS C C2 200 3,000 5036
S 203/C contact gauge, coil and 4cylinders
B C C4 6 85 4917
B C C4 14 200 4918
B C C4 50 725 4919
B C C4 200 3,000 4920
SS C C4 6 85 5037
SS C C4 14 200 5038
SS C C4 50 725 5039
SS C C4 200 3,000 5040
S 203/C contact gauge, shortflexihose and 1 cylinder
B C SH1 6 85 4921
B C SH1 14 200 4922
B C SH1 50 725 4923
B C SH1 200 3,000 4924
Specifications bar psi HiQ® code
SS C SH1 6 85 5041
SS C SH1 14 200 5042
SS C SH1 50 725 5043
SS C SH1 200 3,000 5044
S 203/C contact gauge, short
flexihose and 2 cylinders
B C SH2 6 85 4925
B C SH2 14 200 4926
B C SH2 50 725 4927
B C SH2 200 3,000 4928
SS C SH2 6 85 5045
SS C SH2 14 200 5046
SS C SH2 50 725 5047
SS C SH2 200 3,000 5048
S 203/C contact gauge, short
flexihose and 4 cylinders
B C SH4 6 85 4929
B C SH4 14 200 4930
B C SH4 50 725 4931
B C SH4 200 3,000 4932
SS C SH4 6 85 5049SS C SH4 14 200 5050
SS C SH4 50 725 5051
SS C SH4 200 3,000 5052
S 203/C contact gauge, long
flexihose and 1 cylinder
B C LH1 6 85 4933
B C LH1 14 200 4934
B C LH1 50 725 4935
B C LH1 200 3,000 4936
SS C LH1 6 85 5053SS C LH1 14 200 5054
SS C LH1 50 725 5055
SS C LH1 200 3,000 5056
Specifications bar psi HiQ® code
S 203/C contact gauge, long
flexihose and 2 cylinders
B C LH2 6 85 4937
B C LH2 14 200 4938
B C LH2 50 725 4939
B C LH2 200 3,000 4940
SS C LH2 6 85 5057
SS C LH2 14 200 5058
SS C LH2 50 725 5059
SS C LH2 200 3,000 5060
S 203/C contact gauge, long
flexihose and 4 cylinders
B C LH4 6 85 4941
B C LH4 14 200 4942
B C LH4 50 725 4943
B C LH4 200 3,000 4944
SS C LH4 6 85 5061
SS C LH4 14 200 5062
SS C LH4 50 725 5063
SS C LH4 200 3,000 5064
S 203/RC residual gas outlet, contactgauge
B RC 6 85 4945
B RC 14 200 4946
B RC 50 725 4947
B RC 200 3,000 4948
SS RC 6 85 5065
SS RC 14 200 5066
SS RC 50 725 5067
SS RC 200 3,000 5068
Gas panels S 203. Product names and codes.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
39/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
S 203/RC residual gas outlet, contact
gauge, coil and 1 cylinder
B RC C1 6 85 4949
B RC C1 14 200 4950
B RC C1 50 725 4951
B RC C1 200 3,000 4952
SS RC C1 6 85 5069
SS RC C1 14 200 5070
SS RC C1 50 725 5071
SS RC C1 200 3,000 5072
S 203/RC residual gas outlet, contact
gauge, coil and 2 cylinders
B RC C2 6 85 4953
B RC C2 14 200 4954
B RC C2 50 725 4955
B RC C2 200 3,000 4956
SS RC C2 6 85 5073
SS RC C2 14 200 5074
SS RC C2 50 725 5075
SS RC C2 200 3,000 5076
S 203/RC residual gas outlet, contactgauge, coil and 4 cylinders
B RC C4 6 85 4957
B RC C4 14 200 4958
B RC C4 50 725 4959
B RC C4 200 3,000 4960
SS RC C4 6 85 5077
SS RC C4 14 200 5078
SS RC C4 50 725 5079
SS RC C4 200 3,000 5080
Specifications bar psi HiQ® code
S 203/RC residual gas outlet, contact
gauge, short flexihose and 1 cylinder
B RC SH1 6 85 4961
B RC SH1 14 200 4962
B RC SH1 50 725 4963
B RC SH1 200 3,000 4964
SS RC SH1 6 85 5081
SS RC SH1 14 200 5082
SS RC SH1 50 725 5083
SS RC SH1 200 3,000 5084
S 203/RC residual gas outlet, contact
gauge, short flexihose and 2 cylinders
B RC SH2 6 85 4965
B RC SH2 14 200 4966
B RC SH2 50 725 4967
B RC SH2 200 3,000 4968
SS RC SH2 6 85 5085
SS RC SH2 14 200 5086
SS RC SH2 50 725 5087
SS RC SH2 200 3,000 5088
S 203/RC residual gas outlet, contactgauge, short flexihose and 4 cylinders
B RC SH4 6 85 4969
B RC SH4 14 200 4970
B RC SH4 50 725 4971
B RC SH4 200 3,000 4972
SS RC SH4 6 85 5089
SS RC SH4 14 200 5090
SS RC SH4 50 725 5091
SS RC SH4 200 3,000 5092
Specifications bar psi HiQ® code
S 203/RC residual gas outlet, contact
gauge, long flexihose and 1 cylinder
B RC LH1 6 85 4973
B RC LH1 14 200 4974
B RC LH1 50 725 4975
B RC LH1 200 3,000 4976
SS RC LH1 6 85 5093
SS RC LH1 14 200 5094
SS RC LH1 50 725 5095
SS RC LH1 200 3,000 5096
S 203/RC residual gas outlet, contact
gauge, long flexihose and 2 cylinders
B RC LH2 6 85 4977
B RC LH2 14 200 4978
B RC LH2 50 725 4979
B RC LH2 200 3,000 4980
SS RC LH2 6 85 5097
SS RC LH2 14 200 5098
SS RC LH2 50 725 5099
SS RC LH2 200 3,000 5100
S 203/RC residual gas outlet, contactgauge, long flexihose and 4 cylinders
B RC LH4 6 85 4981
B RC LH4 14 200 4982
B RC LH4 50 725 4983
B RC LH4 200 3,000 4984
SS RC LH4 6 85 5101
SS RC LH4 14 200 5102
SS RC LH4 50 725 5103
SS RC LH4 200 3,000 5104
B = Brass
SS = Stainless steel
Cx = Coil and number of cylinders
SHx = Short flexihose and number of cylinders
LHx = Long flexihose and number of cylinders
C = Contact gauge
R = Residual gas outlet
RC = Residual gas outlet and contact gauge
8/17/2019 HiQ Catalogue Equipment Linde899 88330
40/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
HiQ® REDLINE Gas panels D 204. Double gas panel.Single stage gas supply panel with internal gas purging, designed for high purity gases and mixtures (including flammable), with connection
for 2x1 cylinder.
Technical data
Inlet primary pressure 230 bar 3,300 psi
Outlet pressure 0.5–6 bar 8–85 psi
2.5–14 bar 35–200 psi
2.5–50 bar 35–725 psi
10–200 bar 145–3,000 psi
Outlet gauge range –1–10 bar –14.5–145 psi
0–25 bar 0–360 psi
0–80 bar 0–1,400 psi
0–315 bar 0–4,500 psi
Operating temperature –20 – +70°C –4 – +158°F
Connection 2x1, 2x2 or 2x4 cylinders
Process gas in NPT 1/4” female
Process gas out NPT 1/4” female
Purge gas outlet Tube fitting 6 mm
Material
Housing Brass, Ni/Cr plated
Stainless steel 316L
Seals PVDF PCTFE
Membrane Hastelloy®
Description
Gas panel D 204 is designed for double cylinders or bundles. It isequipped with internal gas purging to avoid contaminants entering the
process line after changing the cylinders. It is is mounted on a stainless
steel console and consists of a pressure regulator, inlet and outlet pres-
sure gauges, a relief valve and shut-off valves for the process gas at the
high pressure end and for the purging gas. The gas supply is uninterrupt-
ed during cylinder change. Switch-over is done manually.
The panel can also be equipped with a contact gauge (/C models) for au-
tomatic surveillance. When applicable the panel can be ordered with
residual gas line (/R models) connecting the relief valve with the purge
outlet.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
41/262
~
1 8 0
1 5 5
6 0
245158
To process To ventilation
Processgas inlet
3
0
6
0
9
3 6 9 12 15 18 21 23 27
Flow, Nm3/h N2
Downstream pressure, bar
* Set pressure
10 bar*
M a x f
l o w
All measurements in millimeters.
Model R. Drawings of other types available on request.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
42/262
8/17/2019 HiQ Catalogue Equipment Linde899 88330
43/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
SS R C2 6 85 5149
SS R C2 14 200 5150
SS R C2 50 725 5151
SS R C2 200 3,000 5152
D 204/R residual gas outlet, coil and
4 cylinders
B R C4 6 85 5113
B R C4 14 200 5114
B R C4 50 725 5115
B R C4 200 3,000 5116
SS R C4 6 85 5153
SS R C4 14 200 5154
SS R C4 50 725 5155
SS R C4 200 3,000 5156
D 204/R residual gas outlet, coil and
8 cylinders
B R C8 6 85 5117
B R C8 14 200 5118
B R C8 50 725 5119
B R C8 200 3,000 5120
SS R C8 6 85 5157SS R C8 14 200 5158
SS R C8 50 725 5159
SS R C8 200 3,000 5160
D 204/R residual gas outlet, short
flexihose and 2 cylinders
B R SH2 6 85 5121
B R SH2 14 200 5122
B R SH2 50 725 5123
B R SH2 200 3,000 5124
SS R SH2 6 85 5161SS R SH2 14 200 5162
SS R SH2 50 725 5163
SS R SH2 200 3,000 5164
Specifications bar psi HiQ® code
D 204/R residual gas outlet, short
flexihose and 4 cylinders
B R SH4 6 85 5125
B R SH4 14 200 5126
B R SH4 50 725 5127
B R SH4 200 3,000 5128
SS R SH4 6 85 5165
SS R SH4 14 200 5166
SS R SH4 50 725 5167
SS R SH4 200 3,000 5168
D 204/R residual gas outlet, short
flexihose and 8 cylinders
B R SH8 6 85 5129
B R SH8 14 200 5130
B R SH8 50 725 5131
B R SH8 200 3,000 5132
SS R SH8 6 85 5169
SS R SH8 14 200 5170
SS R SH8 50 725 5171
SS R SH8 200 3,000 5172
D 204/R residual gas outlet, longflexihose and 2 cylinders
B R LH2 6 85 5133
B R LH2 14 200 5134
B R LH2 50 725 5135
B R LH2 200 3,000 5136
SS R LH2 6 85 5173
SS R LH2 14 200 5174
SS R LH2 50 725 5175
SS R LH2 200 3,000 5176
D 204/R residual gas outlet, longflexihose and 4 cylinders
B R LH4 6 85 5137
B R LH4 14 200 5138
B R LH4 50 725 5139
B R LH4 200 3,000 5140
Specifications bar psi HiQ® code
SS R LH4 6 85 5177
SS R LH4 14 200 5178
SS R LH4 50 725 5179
SS R LH4 200 3,000 5180
D 204/R residual gas outlet, long
flexihose and 8 cylinders
B R LH8 6 85 5141
B R LH8 14 200 5142
B R LH8 50 725 5143
B R LH8 200 3,000 5144
SS R LH8 6 85 5181
SS R LH8 14 200 5182
SS R LH8 50 725 5183
SS R LH8 200 3,000 5184
D 204/C contact gauge
B C 6 85 3439
B C 14 200 3154
B C 50 725 3440
B C 200 3,000 3441
SS C 6 85 3442
SS C 14 200 3155SS C 50 725 3443
SS C 200 3,000 3444
D 204/C contact gauge, coil and 2
cylinders
B C C2 6 85 4000
B C C2 14 200 4001
B C C2 50 725 4002
B C C2 200 3,000 4003
SS C C2 6 85 4036
SS C C2 14 200 4037SS C C2 50 725 4038
SS C C2 200 3,000 4039
B = Brass
SS = Stainless steel
Cx = Coil and number of cylinders
SHx = Short flexihose and number of cylinders
LHx = Long flexihose and number of cylinders
C = Contact gauge
R = Residual gas outlet
RC = Residual gas outlet and contact gauge
8/17/2019 HiQ Catalogue Equipment Linde899 88330
44/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
D 204/C contact gauge, coil and 4
cylinders
B C C4 6 85 4004
B C C4 14 200 4005
B C C4 50 725 4006
B C C4 200 3,000 4007
SS C C4 6 85 4040
SS C C4 14 200 4041
SS C C4 50 725 4042
SS C C4 200 3,000 4043
D 204/C contact gauge, coil and 8
cylinders
B C C8 6 85 4008
B C C8 14 200 4009
B C C8 50 725 4010
B C C8 200 3,000 4011
SS C C8 6 85 4044
SS C C8 14 200 4045
SS C C8 50 725 4046
SS C C8 200 3,000 4047
D 204/C contact gauge, shortflexihose and 2 cylinders
B C SH2 6 85 4012
B C SH2 14 200 4013
B C SH2 50 725 4014
B C SH2 200 3,000 4015
SS C SH2 6 85 4048
SS C SH2 14 200 4049
SS C SH2 50 725 4050
SS C SH2 200 3,000 4051
Specifications bar psi HiQ® code
D 204/C contact gauge, short
flexihose and 4 cylinders
B C SH4 6 85 4016
B C SH4 14 200 4017
B C SH4 50 725 4018
B C SH4 200 3,000 4019
SS C SH4 6 85 4052
SS C SH4 14 200 4053
SS C SH4 50 725 4054
SS C SH4 200 3,000 4055
D 204/C contact gauge, short
flexihose and 8 cylinders
B C SH8 6 85 4020
B C SH8 14 200 4021
B C SH8 50 725 4022
B C SH8 200 3,000 4023
SS C SH8 6 85 4056
SS C SH8 14 200 4057
SS C SH8 50 725 4058
SS C SH8 200 3,000 4059
D 204/C contact gauge, longflexihose and 2 cylinders
B C LH2 6 85 4024
B C LH2 14 200 4025
B C LH2 50 725 4026
B C LH2 200 3,000 4027
SS C LH2 6 85 4060
SS C LH2 14 200 4061
SS C LH2 50 725 4062
SS C LH2 200 3,000 4063
Specifications bar psi HiQ® code
D 204/C contact gauge, long
flexihose and 4 cylinders
B C LH4 6 85 4028
B C LH4 14 200 4029
B C LH4 50 725 4030
B C LH4 200 3,000 4031
SS C LH4 6 85 4064
SS C LH4 14 200 4065
SS C LH4 50 725 4066
SS C LH4 200 3,000 4067
D 204/C contact gauge, long
flexihose and 8 cylinders
B C LH8 6 85 4032
B C LH8 14 200 4033
B C LH8 50 725 4034
B C LH8 200 3,000 4035
SS C LH8 6 85 4068
SS C LH8 14 200 4069
SS C LH8 50 725 4070
SS C LH8 200 3,000 4071
D 204/RC residual gas outlet, contactgauge
B RC 6 85 5185
B RC 14 200 5186
B RC 50 725 5187
B RC 200 3,000 5188
SS RC 6 85 5225
SS RC 14 200 5226
SS RC 50 725 5227
SS RC 200 3,000 5228
Gas panels D 204. Product names and codes.
8/17/2019 HiQ Catalogue Equipment Linde899 88330
45/262
HiQ® Specialty gas program.
Equipment & gas distribution systems.
Specifications bar psi HiQ® code
D 204/RC residual gas outlet, contact
gauge, coil and 2 cylinders
B RC C2 6 85 5189
B RC C2 14 200 5190
B RC C2 50 725 5191
B RC C2 200 3,000 5192
SS RC C2 6 85 5229
SS RC C2 14 200 5230
SS RC C2 50 725 5231
SS RC C2 200 3,000 5232
D 204/RC residual gas outlet, contact
gauge, coil and 4 cylinders
B RC C4 6 85 5193
B RC C4 14 200 5194
B RC C4 50 725 5195
B RC C4 200 3,000 5196
SS RC C4 6 85 5233
SS RC C4 14 200 5234
SS RC C4 50 725 5235
SS RC C4 200 3,000 5236
D 204/RC residual gas outlet, contactgauge, coil and 8 cylinders
B RC C8 6 85 5197
B RC C8 14 200 5198
B RC C8 50 725 5199
B RC C8 200 3,000 5200
SS RC C8 6 85 5237
SS RC C8 14 200 5238
SS RC C8 50 725 5239
SS RC C8 200 3,000 5240
Specifications bar psi HiQ® code
D 204/RC residual gas outlet, contact
gauge, short flexihose and 2 cylinders
B RC SH2 6 85 5201
B RC SH2 14 200 5202
B RC SH2 50 725 5203
B RC SH2 200 3,000 5204
SS RC SH2 6 85 5241
SS RC SH2 14 200 5242
SS RC SH2 50 725 5243
SS RC SH2 200 3,000 5244
D 204/RC residual gas outlet, contact
gauge, short flexihose and 4 cylinders
B RC SH4 6 85 5205
B RC SH4 14 200 5206
B RC SH4 50 725 5207
B RC SH4 200 3,000 5208
SS RC SH4 6 85 5245
SS RC SH4 14 200 5246
SS RC SH4 50 725 5247
SS RC SH4 200 3,000 5248
D 204/RC residual gas outlet, contactgauge, short flexihose and 8 cylinders
B RC SH8 6 85 5209
B RC SH8 14 200 5210
B RC SH8 50 725 5211
B RC SH8 200 3,000 5212
SS RC SH8 6 85 5249
SS RC SH8 14 200 5250
SS RC SH8 50 725 5251
SS RC SH8 200 3,000 5252
Specifications bar psi HiQ® code
D 204/RC residual gas outlet, contact
gauge, long flexihose and 2 cylinders
B RC LH2 6 85 5213
B RC LH2 14 200 5214
B RC LH2 50 725 5215
B RC LH2 200 3,000 5216
SS RC LH2 6 85 5253
SS RC LH2 14 200 5254
SS RC LH2 50 725 5255
SS RC LH2 200 3,000 5256
D 204/RC residual gas outlet, contact
gauge, long flexihose and 4 cylinders
B RC LH4 6 85 5217
B RC LH4 14 200 5218
B RC LH4 50 725 5219
B RC LH4 200 3,000 5220
SS RC LH4 6 85 5257
SS RC LH4 14 200 5258
SS RC LH4 50 725 5259
SS RC LH4 200 3,000 5260
D 204/RC residual gas outlet, contactgauge, long flexihose and 4 cylinders
B RC LH8 6 85 5221
B RC LH8 14 200 5222
B RC LH8 50 725 5223
B RC LH8 200 3,000 5224
SS RC LH8 6 85 5261
SS RC LH8 14 200 5262
SS RC LH8 50 725 5263
SS RC LH8 200 3,000 5264
B = Brass
SS = Stainless steel
Cx = Coil and
Top Related