1
2
HIGH PRECISION SURFACE and FORM GRINDERFSG-618M, FSG-2A618
Features:• This high precision surface and form grinder has been specially developed and improved in recent years.• The interlock between electrical cabinet door and power supply is established to ensure safe operation.• The optimum span of double V crossfeed guideways is designedbased on bending moment, kinematics supporting force.• All essential castings are mode of high grade of meehanite castiron that is stress relieved through annealing to eliminateinternal stress.• With the greatest stiffness and stability of the castings, this machine is suitable for both precision surface grinding and formgrinding.
Standard Accessories:• Tool Box• Dust protection plate• Pin spanner wrench• Levelling pad• Touch - up paint• Hex. wrenches• Levelling set screws• Balancing arbor• Fuse• Coupling• Lifting rods• Magnetic chuck setting screw• Pipe connector• Wheel flange
Optional Accessories:• Halogen Lamp• Permanent Magnetic Chuck (150 x 450
mm, 200 x 450 mm)• Inclinable permanent magnetic chuck • Electromagnetic chuck (150 x 450 mm,
150 x 300 mm)• Chuck control• Parallel dressing attachment• Precision Vice• Coolant system, Splash guard, & Dust
collector• Diamond dresser• Balancing stand• Universal wheel guard• Wheel flange and weight• Punch former
DESCRIPTION UOM FSG-618M FSG-2A618Table Size mm 146 x 460Max. Grinding Length (Longitudinal) mm 457Max. Grinding width (Crosswise) mm 152Max. Distance from Table Surface to Spindle Centerline mm 457Standard Magnetic Chuck Size mm 150 x 450
Longitudinal Move-ment of Table
Longitudinal Travel, Hydraulic mm 500Max Travel (Manual) mm 482 510
Longitudina Travell, Hydraulicm/min
-5 - 25
fpm 16 - 82
Cross Transverse Travel
Rapid Travel, approx. mm/min-
960ipm 38
Automatic Transverseincrement mm - 0.4 - 6Maximum Automatic Travel mm - 171Maximum Manual Travel mm 180Handwheel Per Revolution mm 3Handwheel Per Graduation mm 0.01
Wheelhead Vertical Infeed
Per Revolution mm 1Per Graduation mm 0.005
Grinding Spindle Drive
Speed 60Hz / 3450rpm, 50Hz / 2850 rpmPower rating kW 1.5
Standard Grinding Wheel
Diameter mm 203Width mm 12.7Bore Diameter mm 31.75
Hydraulic system Dro
Power rating kW - 0.75Power rating kW - 0.04
Floor Space (L x W x H) mm 1900 x 1400 x 2130 1900 x 1600 x 2130Weights Net Weight (Approx.) kgs 680 800Rated power approx. kW 1.65 2.5Packing dimensions (L x W x H) mm 1120 x 1016 x 2160 1550 x 1120 x 2135
*Picture shown with optional accessories
3
HIGH PRECISION and AUTOMATIC SURFACE GRINDER
Features: • Reliable high performance precision surface and plunge grindering cycle• Automatic surface and plunge grinding cycle• The Double-V crossfeed guideway span • All essential castings are made of a high grade of cast iron that is stress relieved
by annealing.
DESCRIPTION UOM FSG-2A818/3A818 FSG-2A 1224/3A 1224Table Size mm 203 x 457 305 x 610Max. Grinding Length (Longitudinal) mm 457 610Max. Grinding width (Crosswise) mm 203 305Max. Distance from Table Surface to Spindle Centerline mm 457 630Standard Magnetic Chuck Size mm 200 x 450 300 x 600
Longitudinal Movement of TableLongitudinal Travel, Hydraulic mm 500 650Max Travel (Manual) mm 530 700Table speed, variable m/min 5~25 5 ~ 25
Cross Transverse Travel
Rapid travel (Approx.) mm/min 960 1100Auto transverse increment mm 0.4 ~ 6 1~12Max. auto transverse travel mm 230 360Max. Automatic Transverse Travel mm 240 370per Revolution mm 4 4Per Graduation mm 20 0,02
Wheelhead vertical infeed
Automatic infeed mm 0.002-0.04 (3A Only) 0.002-0.04 (3A Only)Handwheel per revolutino mm 2 2Handwheel per graduation mm 0.01 0,01Rapid travel, Approx mm/min 330 (3A Only) 330 (3A Only)Per Revolution mm 2 (3A Only) 2 (3A Only)Per Graduation mm 0.01 (3A Only) 0.01 (3A Only)
Standard Grinding DriveSpeed
60 Hz / 3450 rpm 60Hz (1750rpm)50 Hz / 2850 rpm 50Hz (1450rpm)
Power Rating kW 1.5 3,7Hydraulic Drive Power Rating kW 0.75 1,5Crossfeed Drive Power Rating Watt 40 0,08Elevating Drive Power Rating kW 0.19 (3A Only) 0.19 (3A Only)
Standard Grinding WheelDiameter mm 203 355Width mm 12.7 50Bore mm 31.75 127
Total rated power (Approx.) kW 3.7 7,4Packing dimensions (Lx Wx H) mm 1854 x 1549 x 2210 2743 x1905 x 2235Floor Space (Lx Wx H) mm 2300 x 1575 x 1740 2670 x 1830 x 1900
FSG-2A818/3A818, FSG-2A 1224/3A 1224
Optional Accessories: FSG-2A818/3A818• Permanent Magnetic Chuck (150 x 450mm, 200 x 450mm, 300 x 600mm)• Electromagnetic chuck (150 x 450mm, 150 x 300mm, 300 x 600mm)• Coolant system, Splash guard, & Dust collector• Precision Vice• Chuck control• Universal wheel guard• Wheel flange and weight
Standard Accessories:• Wheel flange & weight• Levelling screw, nuts and pads• Operation manual, part list & accuracy report• Grinding wheel• Balancing arbor• Tool box with tools
Optional Accessories: FSG-2A 1224 / FSG-3A1224• Machine lamp• Diamond dresser• Punch former• Inclinable electromagnetic chuck• Balancing stand (roller type)• Dust collector• Combination coolant & dust exhaust unit with magnetic separator
*Picture shown with optional accessories
4
PRECISION SURFACE GRINDING MACHINE
FSG-1224ADIII / 1632ADIII / 1640ADII / 2040 ADIII / 2060 ADIII
DESCRIPTION UOM FSG-1224ADIII FSG-1632ADIII FSG-1640ADII FSG-2040 ADIII FSG-2060 ADIIIAutomatic Precision Colum Type High Precision 3Axis Auto.
Table Size mm 300 x 600 400 x 800 400 x 1000 500 x 1000 500 x 1500Max. Grinding Length (Longitudinal) mm 610 810 1015 1000 1500Max. Grinding width (Crosswise) mm 305 405 500Max. Distance from Table Surface to Spindle Centerline mm 620 730
Standard Magnetic Chuck Size mm 300 x 600 400 x 800 400 x 1000 500 x 1000 500 x 1500
Longitudinal Movement of Table
Longitudinal Travel, Hydraulic mm 650 850 1050 500
Max Travel (Manual) mm 700 900 1100 1100 1600Table speed, variable m/min 5 ~ 25 5 ~ 25
Cross Transverse Travel
Rapid travel (Approx.) 60Hz (3.5m/min), 50Hz (2.9m/min) 60Hz (1.5m/min), 50Hz (1.25m/min)Auto transverse increment mm 3 ~ 32 3 ~ 32Max.automatic travel mm 305 405 505Max. manual travel mm 350 460 560Handwheel per revolution mm 6 5Handwheel per graduation mm 0,1 0,02
Micro feedper revolution mm 0,1 0,1per graduation mm 0,001 0,001
Wheelhead vertical infeed
Auto infeed mm 0.001 ~ 0.04 0.001 ~ 0.04
Rapid travel (Approx.) mm/min 500 400
Standard Grinding Drive
Speed 60Hz (1750rpm), 50Hz (1450rpm) 60Hz (1740rpm) ,50Hz (1450rpm)
Power Rating kW 3,73 5.6 ,7.5 (Opt.) 7,5
Standard Grinding Wheel
Diameter mm 355 355, 508 (Opt.)Width mm 50 50,8Bore mm 127 127
Floor space mm 2950x1490x2080 3340x1730x2080 4280x173x2080 3810x2997x2794 4953x2997x2794
WeightNet Weight (Approx.) kgs 2200 2900 3500 6200 7200Gross weight approx. kgs 2700 3550 4200 6950 8000
Rated power approx. kW 5,6 6,3 13,5 17Packing dimensions mm 2720x1760x2235 2840x2020x2235 3200x2040x2235 3640x2280x2540 4850x2280x2540
Features:• 3 Axes needle roller slide way• AC servo vertical drive (high torque, speed and accurate
positioning with a minimum increment of 0.001 mm)• Crossfeed speed control (option)
Standard Accessories: • Diamond dresser with diamond (1K)• Levelling screw, nuts and pads• Wheel flange and weight• Splash guard assembly (pipe & noozle included)• Operation manual, part list & accuracy report• Grinding wheel• Balancing arbor• Tool box with tools
Optional Accessories:• Machine lamp• Diamond dresser• Wheel flange• Electromagnetic chuck • Parallel dressing attachment (hydraulic type)• Overwheel parallel dresser with automatic dress
compensation• Wheelhead mounted automatic rotary diamond dresser with auto wheel dressing compensation• Balancing stand with levelling bubble
• Coolant sytem with auto feeding device• Coolant system with auto paper feeding
device & magnetic separator• Water baffle• Chuck controller• Spindle motor• Crossfeed ballsrew• Hydraulic temperature regulator• Frequency Converter
*Picture shown with optional accessories
*Picture shown with optional accessories
5
OPTIONAL ACCESSORIES
Machine Lamp Machine Lamp Wheel Flange Punch Former Diamond Dresser
Grinding WheelInclinableElectromagnetic Chuck
Electromagnetic Magnetic Chuck
InclinableMagnetic Chuck
PermanetMagnetic Chuck
Precision Vise Parallel DressingAttachment Manual
Dust Collector
Balancing Stand(Roller Type)
Combination Coolant &Exhaust Unit
Splash Guard
Parallel Dressing Attachment(Hydraulic)
Combination Coolant &Exhaust Unit with Magnetic Separator
Combination Coolant &Dust Exhaust Unit
Coolant System with Manual Paper FeedingDevice (with 1roll of paper)
Chuck Controller
Coolant System with Double Filter
Universal Wheel Guardfor Side Forming
Coolant System
Over the Wheel Auto.Straight Line Dressing& Compensation Device
Dual Face Dresser
Adapter for Monting Diaform Dresser
Balancing Stand withLevelling Bubble
Rotary Diamond Dresser
Balance Stand
6
SURFACE GRINDING MACHINEKGS 150, KGS 250, KGS818AH/AHR/AHD
*Picture shown with optional accessories
PARAMETERS UNIT KGS 150 KGS 250 KGS818AH/AHR/AHDWorking Surface of Table mm 150 x 450 200 x 460 200 x 460
Max. Table Travel mm 480 510 510
Max. Cross Travel mm 178 250 250
Distance Between Table Surface and Spindle Center mm 360 530 530
Max. Table Load kgs 100 120 150
T-Slot (Number x Width) mm 1 x 14 1 x 14 1 x 14
Table Speed m/min Manual Manual 0 ~ 25
Crossfeed Handwheel1 grad
mm0.01 0.02 0.02
1 rev 2.5 5 5
Automatic Crossfeed of Saddle mm — — - / 0.5 ~ 12 / 0.5 ~ 12
Power Cross Feed50Hz
mm— — 780
60Hz — — 950
Grinding Wheel Dimensions mm 180 x 3 x 32/31.75 200 x 25 x 32/31.75 200 x 25 x 32/31.75
Spindle Speed50Hz
rpm2850 2850 2850
60Hz 3420 3420 3420
Vertical Handwheel1 grad
mm0.005 0.01 0.01/0.01/0.001
1 rev 1.25 2 2
Automatic Down Feed Rate mm — — - / - / 0.002 ~ 0.2
Power Head Increment mm — — 380
Spindle Motor kw 1.1 1.5 1.5
Vertical Motor kw — — 90
Hydraulic Motor kw — — 1.5
Dust Collection Motor w 550 550 550
Coolant Motor w 90 90 90
Crossfeed Motor w — — - / 60 / 60
Floor Space mm 1900 x 1300 1900 x 1900 2500 x 1900
Packing Dimensions mm 1170 x 1000 x 1950 1470 x 1170 x 2170 1920 x 1458 x 2125
Net Weight kgs 560 1200 1280 / 1280 / 1320
Gross Weight kgs 710 1400 1480 / 1480 / 1520
7
SURFACE GRINDING MACHINEKGS1224AH/AHR/AHD, KGS1632AH/AHR/AHD, KGS1640AH/AHR/AHD, KGS510AH/AHD, KGS615AH/AHD
*Picture shown with optional accessories
*Picture shown with optional accessories
PARAMETERS UNIT KGS1020AH/AHR/AHD
KGS1224AH/AHR/AHD
KGS1632AH/AHR/AHD
KGS1640AH/AHR/AHD
KGS510AH/AHD
KGS615AH/AHD
Working Surface of Table mm 255×510 300 x 600 400 x 800 400 x 1000 500 x 1000 600 x 1500
Max. Table Travel mm 560 660 920 1120 1140 1600
Max. Cross Travel mm 280 370 450 450 540 660
Distance Between Table Surface and Spindle Center mm 535 520 580 580 590 600
Max. Table Load kgs 300 420 700 700 700 800
T-Slot (Number x Width) mm 1×14 1 x 14 3 x 14 3 x 14 3 x 16 3 x 16
Table Speed m/min 5 ~ 25 5 ~ 25 5 ~ 25 5 ~ 25 5 ~25 5 ~ 25
Crossfeed Handwheel1 grad mm 0:02 0.02 0.02 0.02 0.02 0.02
1 rev 5 5 5 5 5 5
Automatic Crossfeed of Saddle mm 0.5 ~ 12 0.5 ~ 12 0.5 ~ 12 0.5 ~ 12 0.5 ~ 12 0.5 ~ 12
Power Cross Feed50Hz
mm790 790 790 790 1250 1250
60Hz 950 950 950 950 1500 1500
Grinding Wheel Dimensions mm 200×25×32/31.75 355 x 40 x 127 355 x 40 x 127 355 x 40 x 127 355 x 40 x 127 355 x 50 x 127
Spindle Speed50Hz
rpm2850 1450 1450 1450 1450 1450
60Hz 3420 1740 1740 1740 1740 1740
Vertical Handwheel1 grad
mm0.01/0.01/0.01/0.005 0.01 / 0.01 / 0.001 0.01 / 0.01 / 0.001 0.01 / 0.01 / 0.001 0.002 0.002
1 rev 2 2 / 2 / 0.5 2 / 2 / 0.5 2 / 2 / 0.5 0.5 0.5
Automatic Down Feed Rate mm —/—/0.002~0.2 - / - / 0.005 ~ 0.025 - / - / 0.005 ~ 0.025 - / - / 0.005 ~ 0.025 0.005 ~ 0.04 0.005 ~ 0.04
Power Head Increment mm —/380/— - / 380 / 230 - / 380 / 230 - / 380 / 230 230 230
Spindle Motor kw 2:02 4 5.5 5.5 7.5 7.5
Vertical Motor w —/90/—/4 NM Servo Motor - / 90 / 90 - / 90 / 90 - / 90 / 90 370 370
Hydraulic Motor kw 1:05 1.5 2.2 2.2 2.2 5.5
Dust Collection Motor w 550 550 550 550 550 550
Coolant Motor w 90 90 90 90 90 90
Crossfeed Motor w 60 90 90 90 370 370
Floor Space mm 1900×2300 2600 x 2500 3600 x 2600 3600 x 2600 4445 x 2200 5810 x 2445
Packing Dimensions mm 1960×1560×2140 2080 x 1870 x 2195
2720 x 2155 x 2195
2920 x 2155 x 2195
3400 x 2265 x 2250
4000 x 2260 x 2250
Net Weight kgs 1655/1680/1680 1800 / 1810 / 1910 2800 / 2810 / 2850 2900 / 2910 / 2950 5000 6250
Gross Weight kgs 1905/1930/1930 2100 / 2100 / 2210 3100 / 3110 / 3150 3200 / 3210 / 3250 6000 7250
8
STANDARD ACCESSORIES
Permanent Magnetic Chuck
Grinding Wheel
Wheel Flange
Wheel Balancing Base
Wheel Balancing Arbor
Extractor
Diamond Dresser
Leveling Pad
Anchor Bolt
Tool Box with Tools
Rapid Elevation
Overhead Parallel Dresser
Suction Device
Tiltable Permanent Chuck
Micro Feed
Angle Dresser
Cooling & Suction Device
Electro-Magnetic Chuck
Digital Readout System
Radius Dresser
Magnetic Separator
Demagnetizer
Rear Splash Guard
Chuck Control
Cooling c/w Magnetic Paper Filter
OPTIONAL ACCESSORIES
kls/
p&a.
307/
2k/s
gm.2
/hen
.uni
/05.
15
BONTANGTel. : 0811 581 4591CIKARANGTel. : (021) 8984-5858CILEGONTel. : (0254) 387-987LAMPUNGTel. : (0721) 474-480MEDANTel. : (061) 452-7269
YOGYAKARTATel. : (0274) 642-9097,98,99
PALEMBANGTel. : (0711) 571-7788 SAMARINDATel. : (0541) 410-0637SEMARANGTel. : (024) 355-8788SURABAYA (Juanda)Tel. : (031) 868-8328TANJUNG MORAWATel. : (061) 794-1328
Kawan Lama Industrial SolutionBALIKPAPANTel. : (0542) 870-3946PEKANBARUTel. : (0761) 282-98
Top Related