CompanyLOGO
www.hellobaler.com
Adr: Room 1305. Qingdao Center Building, Shinan District, Qingdao,China.Tel: 0086-532-81635758Fax: 0086-532-81635755Email: [email protected]
1
www.hellobaler.com
The biggest baler machine manufacturer with sharing more than 70% market in China;The maker of baler Industry standard;The leader of baler machine with 30 years experience;3 workshops covers 200,000 square meter;60 sets of various types of testing instruments & equipment;More than 300 employees, including over 40 senior engineers, 100 technicians;The first straw baler was produced here; ISO9001,TS16949,SGS certificate.
Factory Introduction :
Factory Introduction
2
www.hellobaler.com
More than 500 sets advanced equipments: CNC lathes, vertical machining centers, deep hole boring machines, floor-type boring and milling machines, NC flame cutting machines, etc.
Work Shop Shows: Three work shop covered 200,000 square meters.
Work Shop and Instruments
3
Instrument shows:
www.hellobaler.com
Features of Vertical Baler
4
Features of Hellobaler Vertical Baler
Easy installation, only need you connect the baler with power;Easy Operation with button;Require small space for operation;Easy maintenance if some mistake happens;Safety promise: equipped with emergency button;Can produce the baler accordingly to customers’ requirement.
www.hellobaler.com
Introduction 1: Hydraulic System
5
1. Hydraulic Cylinder:
All our baling machine’s cylinder is produced by our own factory;
Our cylinder is not only used to our baling machine, but also for famous forklift and truck supplier in China.
3. Electric Motor:“Mengniu” motor which is most popular in China, the lifetime we warranty 3 years!Hydraulic pump: the “Vicks” pump to ensure good performance;
2. Ammeter & voltmeter is here: the operator can observe the baling machine status;If some mistake, the operator can correct in time.
www.hellobaler.com
Introduction 2: Main Frame
6
Main frame:
As you can see in this photos: the main frame is heavy duty by Q235 steel which is the best steel.The main frame lifetime is more than 8 years!
Door:Close the door when operation for pressing;After finishing baling, open the door to let the bale comes out from here!
www.hellobaler.com
Introduction 3: Easy Operation
7
Operate on the control box:There are 7 buttons on the control panel including: motor start; the downside; control knob; motor stop the upside; oil cylinder to stop; Emergency Button.The operator can operate the baling machine through press these buttons.
www.hellobaler.com
Introduction 4: Safety Promise
8
Safety Door:
The vertical baler equipped with safety door;Only with the safety door closed, the machine will be running;
Emergency Button:
There is an emergency button on the control panel:If some mistake, press the button, the baling machine will stop running immediately.
www.hellobaler.com
Application
9
Waste Paper Plastic Film
PET Bottles Paper Cone
Aluminum Cans
Top Related