HAWLE-E3Gate valve
NEW
2 | HAWLE
O-ring carrier with double bayonet
Duplex stainless steel spindle
Extended edge protection
Wedge and wedge nut fully vulcanized. Form fit wedge – wedge nut connection with elastomer embedding > flexible, vibration damping and free from backlash
100% corrosion protection
Stainless steel allen screws
Extended edge protection
Bonnet
Spindle bearing
O-ring carrierwith double bayonet
Wedge nut
Duplex stainless steel spindle
Wiper ring
O-rings
Sliding discs
Bonnet gasket made of elastomer enlaces stainless steel screws
Wedge guide ensures least wear and lowest torque actuation
Body
Full straight bore
Wedge with vulcanized
elastomer all-over
HAWLE-E3 Cutting-edge gate valve technology
E3 bonnets are entirely compatible with all E2 bodies and accessories
Full straight bore - suitable for pigging
Spindle O-rings replaceable under operating pressure
All components made in Austria, incl. ductile cast iron parts
ADVANTAGES HAWLE-E3 GATE VALVE
The Hawle-E3 gate valve is the consequent advancement of the successful E2 gate valve. The O-ring carrier is connected to the allover epoxy powder-coated bonnet by a double bayonet. Load optimized POM wedge guides ensure least wear and lowest torque actuation. The form-fit wedge to wedge nut linkage with elastomer embedding is flexible, vibration damping and free from backlash. The use of Duplex stainless steel spindles in conjunction with 30 years of experience with the epoxy powder-coating process results in maximum corrosion resistance and durability without compromising the Hawle typical low torque actuation.
HAWLE-QUALITY WARRANTYMedium: Water, seawater, gas
In accordance to EN 1074-1 and -2
All illustrations, technical data, dimensions (in mm) and weights (all weights specified in kg) are non-binding. Subject to change.
HAWLE | 3
E3 valve types DN MOP (PN)
Flanged ends*EN 558-1 GR 14 EN 558-1 GR 15
50 - 200 *(250 - 600)
10, 16, 25
Reduction valve flanged ends
100 - 200 *(- 300)65 - 200 *(- 250)
10, 16
Spigot ends Spigot ends with loose flanges
50 - 200 *(- 400) 10, 16
System 2000 System 2000 / System 2000Flanged end / System 2000
50 - 200 *(- 300) 10, 16
PE-welding endsFlange / PE-welding end
50 - 200 10, 16
Socket systemsVRS Socket endBAIO Socket / BAIO SocketBAIO Socket / BAIO spigot end
80 - 200 *(- 300) 10, 16
Combi T Flanged endsSystem 2000System BAIO sockets
65 - 20050 - 15080 - 200
10, 16
Combi III Flanged endsSystem BAIO sockets
80 - 200 100- 200
10, 16
Combi IV Flanged ends
80 - 200 10, 16
VERSIONS AND DIMENSIONS
*in preparation
All illustrations, technical data, dimensions (in mm) and weights (all weights specified in kg) are non-binding. Subject to change.
Prin
ted
on re
cycl
ed, c
hlor
ine-
free
blea
ched
pap
er a
nd a
ging
..
Art
.-N
r.: Z
A3N
00E
302
E
ditio
n 05
.201
8
Your distributor:
E. Hawle Armaturenwerke GmbHWagrainer Straße 13 A-4840 Vöcklabruck
Tel.: +43 (0) 7672 72576 0 Fax: +43 (0) 7672 78464
E-Mail: [email protected]
Hand-wheel
No. 7800
Extension spindlesNo. 9000E2, No. 9500E2
Surface boxesNo. 1750, No. 2050
No. 2051K
Base plateNo. 3481K
Actuator No. 9920
Position indicator
No. 2170E2
Limit switch No. 2190E2
E2 Adapter No. 8630E2
Operating capNo. 2156, No. 2157
No. 2158
HAWAK-Pillar No. 9894, No. 9895
Additional extension spindleNo. 7820, No. 7825
Nut and BoltNo. 8810, No. 8830
No. 8840
Flat gasketNo. 3390, No. 3470
HAWLE ACCESSORIES FOR GATE VALVES
INDUFLOW Agerhatten 16 A 8DK-5220 Odense, Denmark Tel: (+45) 63 10 00 36 • Fax: (+45) 63 10 00 37 E-post: [email protected]
Top Related