8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
1/96
AXELL WIRELESS
GSM-UMTS Commands and Attributesv1.0.0
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
2/96
GSM-UMTS Commands and Attributes v1.0.0
File Name:GSM-UMTS Commands and Attributes v1.0.0 v1.3
Document Number:--
ersion:1. 23
!a"es:96
#ast $evision:2008-07-1
Sub%ect:Commands and Attributes
Aut&or:Anders !ettersson
C&ec'ed:Martin "etter#o$m
A((roved:Martin "etter#o$m
Change Log%ersion C#an&e b' (ate (es)ri*tion
1.0 A! )00*-0+-0* ,nitial version released.
1.1 A! )00*-0+-11 C&an"ed t&e AC and A# descri(t ions to matc& t&e tar"et s(eci icat ion u(dates.Added t&e / T ormat c&a(ter 10.Added alarm attributes c&a(ter 11.$emoved document in ormation rom irst (a"e (ut it on second.C&an"ed ootin" t&rou"&out t&e document.U(dated attributes AC2-AC3 and A#+-A#4.U(dated $S! ,/U 5$D !SD !5) !56 !52 T7# F8C C$C C8MAdded o(to related attributes T9(e ,. C&an"ed t&e ot&er attribs to T9(e ,,di erent c&a(ter.Fi ed errors in ASD ASU/ T u(dated;;;Alarm overvie< table u(dated.MN! attribute added.
1.) A! )00*-0+-16 U(dated rom tar"et s(eci ication 1.):
- $S! attribute u(dated.- /eartbeat ormat u(dated.
1.6 A! )00*-03-1= MGA attribute removed >not im(lemented in t&is tar"et?.T7M attribute added to t&e s(eci ication similar as rom t&e SF tar"et.!52 status added to / T and D88 moved to bit 0 in same b9te as be ore.MN! c&an"ed to NM! as it
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
3/96
GSM-UMTS Commands and Attributes v1.0.0
Contact InformationFor urt&er in ormation about t&is document (lease contact Anders !ettersson.
A@7## 5,$7#7SS
Mailin" address:o 3164S7-132 03 SUND 7$GS57D7N
!&one: B2+ * 23= 23 00Fa : B2+ 30 23= 23 445eb: &tt(:
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
4/96
GSM-UMTS Commands and Attributes v1.0.0
TA LE !" C!#TE#TS 1 8vervie
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
5/96
GSM-UMTS Commands and Attributes v1.0.0
3.)3 SHU Status o s9nt&esiIer u(lin'.....................................................................=2 3.)* #D alid (ea' limitin" levels do
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
6/96
GSM-UMTS Commands and Attributes v1.0.0
1).4 ,8D ,n(ut overload do
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
7/96
GSM-UMTS Commands and Attributes v1.0.0
1 !$ER$IEW
A ell net
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
8/96
GSM-UMTS Commands and Attributes v1.0.0
% $ERSI!# C!M&ATI ILIT'
Commands and attributes described in t&is document re ers to GSM-7DG7re(eaters
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
9/96
GSM-UMTS Commands and Attributes v1.0.0
( USI#G C!MMA#)S A#) ATTRI UTES
5&en lo""ed in to t&e re(eater a number o di erent commands and attributes areavailable. Commands &ave interaction
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
10/96
GSM-UMTS Commands and Attributes v1.0.0
* UILT-I# +EL& S'STEM
4.1 HELP command9 enterin" t&e command
&EL'a list o all attributes and t&eir modes o o(eration are dis(la9ed in al(&abetic order.
T&ree di erent columns are dis(la9ed. First column is t&e actual attribute. Secondcolumn dis(la9s valid attribute access met&ods.r t&is means attribute can be G7T< t&is means attribute can be S7T means attribute can be
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
11/96
GSM-UMTS Commands and Attributes v1.0.0
, GSM-UMTS C!MMA#)S
5.1 STAT ST&e STATUS command "ives an overvie< o t&e entire re(eater $F-con i"urationand status o all alarm sources in t&e s9stem.
7 am(le o a status screen: C l m!R ;1256
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
12/96
GSM-UMTS Commands and Attributes v1.0.0
C!M&RESSE) ALARMS A#) STATUSES
T&is c&a(ter contains alarm attributes t&at returns in ormation in a com(ressedormat. T&is is normall9 used b9 t&e $MC and 7lement Mana"er so t Cla))AIM> Se*AMD> Cla))AMD> ... Se*AS > Cla))AS >
+,am*$eGET AC2
e*$'MA EN MA E MA E MI EN MI EN
!.2 AC( " Com#re$$ed alarm $e%erit& and alarm cla$$config'ration$T&is attribute returns t&e alarm severit9 and class con i"urations or a number oalarm sources.
Usa"eAttribute t9(e: $ead 8nl9
T&is is a com(act messa"e to retrieve Severit9 and Class o miscellaneous alarmsources in t&e re(eater. T&e alarm sources returned are t&e ollo
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
13/96
GSM-UMTS Commands and Attributes v1.0.0
GET AC5
e*$'MA EN MA EN CR E CR E
!.( AC4 " Com#re$$ed alarm $e%erit& and alarm cla$$config'ration$T&is attribute returns t&e alarm severit9 and class con i"urations or a number oalarm sources.
Usa&e
Attribute t9(e: $ead 8nl9
T&is is a com(act messa"e to retrieve Severit9 and Class o miscellaneous alarmsources in t&e re(eater. T&e alarm sources returned are t&e ollo Se*R37> Cla))R37> ... Se*T37> Cla))T3;>
5&ere all severities are described ass
+,am*$e :GET AC$F? (er ormanceand settin"s o t&e e i(ment includin" t&e ollo
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
20/96
GSM-UMTS Commands and Attributes v1.0.0
3 H
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
21/96
GSM-UMTS Commands and Attributes v1.0.0
/ormat in )arrier re*eaters3 H
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
22/96
GSM-UMTS Commands and Attributes v1.0.0
@ is am(li ier saturation status in do
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
23/96
GSM-UMTS Commands and Attributes v1.0.0
,n dosaturated? mode and t&at attenuation needsto be increased. , t&e saturation is too &i"& t&en t&e si"nal ualit9 ma9 beadversel9 a ected b9 t&is leadin" to lodas&? means t&ere is a communications error GSM?or (ilot tone re uenc9 >5CDMA? t&en it (robabl9 means t&e do
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
24/96
GSM-UMTS Commands and Attributes v1.0.0
P indicates current saturation in u(lin' 1.
indicates current saturation in u(lin' ).
# indicates current saturation in u(lin' 6.
M indicates current saturation in u(lin' 2.
@ indicates current saturation in do
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
25/96
GSM-UMTS Commands and Attributes v1.0.0
An am(li ier c&ain "oin" into saturation means t&at "ain in u(lin' is too &i"&
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
26/96
GSM-UMTS Commands and Attributes v1.0.0
indicatin" t&at u(lin' am(li ier c&ain one is saturated and t&at "ain s&ould be deOcreased. C&ain )-2
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
27/96
GSM-UMTS Commands and Attributes v1.0.0
).) AT " Atten'ation #lin T&is attribute is used to read and con i"ure attenuation "ain settin"s in t&e u(lin'
(at&.Attribute t9(e: $ead and 5rite
T&is attribute is used to read and con i"ure t&e attenuation "ain in t&e u(lin'(at&s. Attenuation con i"ures &o< muc& t&e c&ain s&ould be de"raded rom ma Oimum "ain (er ormance.
/ormat on settin& *arameterSET AT / 3 JL K JM HK JN K
is t&e c&ain selector and @ is t&e attenuation in u(lin' c&ain . 8(tionall9 attenuOation in c&ain # M N can be set in t&e same command.
T&e c&ain selector rom 1 to 2 and t&e attenuation is settable in 1 d ste(s rom 0to 60 d .
+,am*$eSET ATD 2
sets attenuation in do
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
28/96
GSM-UMTS Commands and Attributes v1.0.0
T&is attribute is used to control t&e o(eratin" re uenc9 o t&e am(li iers in t&e reO(eater. T&e attribute ta'es standard c&annel numbers or t&e s9stem involved. Foran 7DG7-GSM t9(e re(eater t&is is t&e A$FCN as de ined b9 t&e c&annel lists orGSM-! GSM-$ and 7-GSM bands as
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
29/96
GSM-UMTS Commands and Attributes v1.0.0
@ C&ain number 1-2.
C&annel number or c&ain P.
# C&ain number 1-2.
M C&annel number or c&ain #.
N C&ain number 1-2.
8 C&annel number or c&ain N.
Allo
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
30/96
GSM-UMTS Commands and Attributes v1.0.0
Attribute t9(e: $ead and 5rite
T&is attribute is used to con i"ure and determine t&e re(eated c&annels in t&edoused
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
31/96
GSM-UMTS Commands and Attributes v1.0.0
means t&at do
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
32/96
GSM-UMTS Commands and Attributes v1.0.0
meanin" t&at t&e loDCS 1*00 band? and *10 or t&e &i"&est re uenc9 t&is re(eatercan use on t&e lin'.
/ormat on "C(MA re*eatersA B 3
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
33/96
GSM-UMTS Commands and Attributes v1.0.0
T&is is es(eciall9 true C1> L1> N2> C2> L1> ...
N1 N) ...? can be an9 c&ain and in an9 order. ,t is t&us(ossible to in(ut onl9 t&e c&ains t&at s&ould be c&an"ed and in
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
34/96
GSM-UMTS Commands and Attributes v1.0.0
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
35/96
GSM-UMTS Commands and Attributes v1.0.0
).12 C C " Stat'$ of EEP 3- chec $'mDis(la9s status o t&e 77!$8M C$C in active devices.
Usa&e
Attribute t9(e: $ead onl9
7ac& active device stores all settin"s and con i"urations in its o
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
36/96
GSM-UMTS Commands and Attributes v1.0.0
Attribute t9(e: $ead onl9
T&is attribute re(lies 'S '2> LIM'A1 L> LIM'A2 L> LIM'A1DL> LIM'A2DL> REFGEN> F71> F72> F75> F76>C7MM 3> FDM-S1> FDM-S2>
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
37/96
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
38/96
GSM-UMTS Commands and Attributes v1.0.0
Dis(la9s a list o t&e radio c&ains in(ut (o
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
39/96
GSM-UMTS Commands and Attributes v1.0.0
GET I'L
e*$'-11;.; -82.5 -11;.; -11;.; -6
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
40/96
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
41/96
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
42/96
GSM-UMTS Commands and Attributes v1.0.0
/ormat on &ettin& *arameters in 2 )arrier re*eater1 3 2
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
43/96
GSM-UMTS Commands and Attributes v1.0.0
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
44/96
GSM-UMTS Commands and Attributes v1.0.0
cou(lin" actor t&an t&e normall9 used 60 d cou(ler bet
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
45/96
GSM-UMTS Commands and Attributes v1.0.0
1 5 2 5 5 5 6 -1;;
meanin" t&at all c&ains are set to 63 d m (ea' out(ut (o
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
46/96
GSM-UMTS Commands and Attributes v1.0.0
).22 3PL " 3't#'t #o0er le%el$Dis(la9s t&e ma imum (o
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
47/96
GSM-UMTS Commands and Attributes v1.0.0
).2( P/C " Po0er do0nlin le%el config'rationT&is attribute is used to con i"ure &o< t&e (o
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
48/96
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
49/96
GSM-UMTS Commands and Attributes v1.0.0
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
50/96
GSM-UMTS Commands and Attributes v1.0.0
SET 'DC RS
T&is
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
51/96
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
52/96
GSM-UMTS Commands and Attributes v1.0.0
a"ain. T&e re(l9 o t&is attribute de(ends on t&e number o installed carriers #,M!A units in t&e re(eater.
T&e irst s9nt&esiIer is also called t&e input s9nt&esiIer
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
53/96
GSM-UMTS Commands and Attributes v1.0.0
N status o out(ut s9nt&esiIer do
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
54/96
GSM-UMTS Commands and Attributes v1.0.0
e*$';;1;
meanin" t&at all s9nt&esiIers in t&e u(lin' are 8
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
55/96
GSM-UMTS Commands and Attributes v1.0.0
See t&e attribute # D or more in ormation on settin" t&e do7$ t9(e re(eaters?.
0 means t&e status is 8 .
1 means t&e status is A#A$M.
Commands and Attributes == 4+
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
56/96
GSM-UMTS Commands and Attributes v1.0.0
- Means t&ere is a communications error
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
57/96
GSM-UMTS Commands and Attributes v1.0.0
12.5 16.2
Meanin" t&at active FDM 1 re(orts a return loss i"ure o 1).6 d and active FDM )re(orts a return loss i"ure o 12.) d .
16.2
Meanin" t&at t&e irst active FDM &as a too lo< or
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
58/96
GSM-UMTS Commands and Attributes v1.0.0
/ MISCELLA#E!US ATTRI UTES
T&is c&a(ter contains attributes t&at deals
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
59/96
GSM-UMTS Commands and Attributes v1.0.0
*.2 C3- " Stat'$ of Comm'nication$ 0ith Acti%e /e%ice$Dis(la9s status o communication bet 'S '2> LIM'A1 L> LIM'A2 L> LIM'A1DL> LIM'A1DL> Re,Ge!> F71> F72> F75> F76>C7MM 3> FDM-S1> FDM-S2>
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
60/96
GSM-UMTS Commands and Attributes v1.0.0
8nl9 active FDM units measure S5$ at so t&is attribute can be used to ind outt&e ormat or t&e return values o t&e attributes 5$# and 5$D.
/ormat
' A D' DA
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
61/96
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
62/96
GSM-UMTS Commands and Attributes v1.0.0
!S# L0 means mains (o.. 'TM:N>
0 means status is 8 .1 means (o
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
63/96
GSM-UMTS Commands and Attributes v1.0.0
*.* PS/ " Po0er S'##l& /i$tri8'tionDis(la9s (oB or -?. T&ere orevolta"es in t&e ran"e o 0-4 are "iven as SN.MM and volta"es in t&e ran"e o 10-44volts are "iven as SNN.M and volta"es in t&e ran"e 100-444 volts are "iven ' 1:LIM'A1 L> ' 1:LIM'A2 L> ' 1:LIM'A1DL> ' 1:LIM'A2DL>' 2:'S '1> ' 2:'S '2> ' 2:LIM'A1 L> ' 2:LIM'A2 L> ' 2:LIM'A1DL> ' 2:LIM'A2DL>' 2:F7>' 5:'S '1> ' 5:'S '2> ' 5:LIM'A1 L> ' 5:LIM'A2 L> ' 5:LIM'A1DL> ' 5:LIM'A2DL>' 5:REF> ' 5:C7MM 3> ' 5:F7>' 6:'S '1> 'SL:'S '1>
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
64/96
GSM-UMTS Commands and Attributes v1.0.0
Usa&e
Attribute t9(e: $ead onl9
T&is attribute re(lies 'S '2> LIM'A1 L> LIM'A2 L> LIM'A1DL> LIM'A2DL>
LIM'A2 L> LIM'A1DL> LIM'A2DL> F7>
but onl9 t9(e 1 re(orts t&is?. , t&e re(eater does not &ave a F8module or t&e F8 module is o t9(e ) or t&ere is no communications
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
65/96
GSM-UMTS Commands and Attributes v1.0.0
0 means status is 81 means status is 7$$8$- >das&? means module is not installed or data is not available >not 9et measured?.
+,am*$eGET ' 1
e*$';-;-;--
meanin" t&at !SU1 #,M!A1U# and #,M!A1D# re(orts (odas&? means module is not installed or data is not available >not 9et measured?.
+,am*$eGET ' 5
e*$'1-;-;-;--
meanin" t&at (o
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
66/96
GSM-UMTS Commands and Attributes v1.0.0
*.12 P;4 " Po0er 4Gives status o t&e (o LIM'A1DL> LIM'A2DL> F71> F72> F75> F76>
Modules t&at are not installed or &as not measured 9et re(orts R-R >das&?.8t&er
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
67/96
GSM-UMTS Commands and Attributes v1.0.0
*.14 TEL " Tem#erat're Le%el$Dis(la9s tem(eratures as measured t&rou"&out t&e re(eater.
Usa&e
Attribute t9(e: $ead onl9
T&is attribute dis(la9s all tem(eratures as measured in t&e di erent boards o t&ere(eater. Tem(erature levels or iber o(tic units are onl9 s&o 'S '1> 'S '2> LIM'A1 L> LIM'A2 L> LIM'A1DL> LIM'A2DL> F7SLAVE1>F7SLAVE2> F7SLAVE5> F7SLAVE6>
Tem(erature or eac& o t&e devices are (resented communications error or module not con i"ured? a E-E>das&? is (resented in corres(ondin" (osition.
+,am*$eGET TEL
e*$'51.6 6
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
68/96
GSM-UMTS Commands and Attributes v1.0.0
!&T! RELATE) ATTRI UTES T'&E I2
T&is c&a(ter contains attributes t&at relates to: 8(tical transmission e ui(ment
Note;
Use t&e attribute F8C to determine
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
69/96
GSM-UMTS Commands and Attributes v1.0.0
no
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
70/96
GSM-UMTS Commands and Attributes v1.0.0
Usa&e
Attribute t9(e: $ead onl9
T&e 8(to Module constantl9 monitors received o(tical level. A too lo< o(tical in(utlevel mi"&t indicate t&at t&ere is somet&in"
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
71/96
GSM-UMTS Commands and Attributes v1.0.0
indicatin" t&at somet&in" is mal unctionin"
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
72/96
GSM-UMTS Commands and Attributes v1.0.0
10 !&T! RELATE) ATTRI UTES T'&E II2
T&is c&a(ter contains attributes t&at relates to: 8(tical transmission e ui(ment
Automated 8(tical #in' Ad%ustment eature >8#A?
Note;
Use t&e attribute F8C to determine
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
73/96
GSM-UMTS Commands and Attributes v1.0.0
e*$'2;;;
1,.2 3LA " 3#tical Lo$$ Ad='$tmentT&is attribute is used to read and ad%ust lin' betas verbose? (ro"ress in ormation is (rinted out on t&escreen as t&e ad%ustments (roceed.
+,am*$eACT 7LA
(er orms an o(tical lin' ad%ustment o lin' rom o(to master to re(eater.
$eadin" 8#A re(lies Start Time> St p Time> I!itial Atte! ati !> Re) lti!%Atte! ati !> Re) lti!% 'il t T !e Le*el> N m#er , Iterati !)> Re) lt
Stri!%>
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
74/96
GSM-UMTS Commands and Attributes v1.0.0
$esultin" Attenuation is t&e attenuation t&at das&? is re(orted instead.
1,.( 3LC " 3#tical Lo$$ Com#en$ationDis(la9s >and o(tionall9 con i"ures? com(ensation or o(tical loss.
Usa&e
Attribute t9(e: $ead and 5rite
Durin" automatic o(timiIation o t&e Fiber8(tic lin' t&e node master reads t&ereceived (ilot tone level and com(ensates or t&e o(tical loss. T&is is to ensure t&att&e in(ut $F level rom t&e 8(tical Master Unit is at t&e correct level to obtain t&ecorrect s9stem "ain.
/ormat on &ettin& *arameter7LC>
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
75/96
GSM-UMTS Commands and Attributes v1.0.0
/ormat on settin& *arameterSET 7LC Atte!>
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
76/96
GSM-UMTS Commands and Attributes v1.0.0
R0 7pt L Det> 'il t 7,,)et Atte! ati !> 'il t L Det> 'il tARFCN>
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
77/96
GSM-UMTS Commands and Attributes v1.0.0
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
78/96
GSM-UMTS Commands and Attributes v1.0.0
Usa&e
Attribute t9(e: $ead and not commissioned?.
+,am*$eSET 'TN -23 " Stat'$ of ecei%ed 3#tical Le%elT&is attribute re(lies
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
79/96
GSM-UMTS Commands and Attributes v1.0.0
- >das&? i measured data is not available >communications error or im(ro(erl9con i"ured s9stem?.
+,am*$e
GET R37
e*$'1
indicatin" t&at received o(tical level is loP" Stat'$ of ecei%ed Pilot Tone Le%elT&is attribute re(lies
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
80/96
GSM-UMTS Commands and Attributes v1.0.0
5&en commissionin" an Avitec $e(eater S9stem it is essential t&at all iber o(ticlin's are o(timiIed and $F-limits ad%usted accordin"l9. To accom(lis& t&is a (ilottone is transmitted rom 8(tical Master Units to t&e Fiber 8(tic Slaves. 9transmittin"
das&? i measured data is not available >communications error or im(ro(erl9con i"ured s9stem?.
+,am*$eGET SH'
e*$'1
indicatin" t&at s9nt&esiIer is unloc'ed and t&at reason or ailure s&ould beinvesti"ated.
1,.12 T>3 " Stat'$ of Tran$mitted 3#tical Le%elT&is attribute re(lies
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
81/96
GSM-UMTS Commands and Attributes v1.0.0
e*$'1
indicatin" t&at somet&in" is mal unctionin"
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
82/96
GSM-UMTS Commands and Attributes v1.0.0
11 +EART EAT "!RMAT
T&e &eartbeat re(ort is transmitted to t&e Avitec 7lement Mana"er on con i"urableintervals >0-44 444 min?. ,n case t&e &eartbeat re(ort is not received b9 t&e Avitec7lement Mana"er
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
83/96
GSM-UMTS Commands and Attributes v1.0.0
/ie$d /ormat (es)ri*tion Sibit000 L Not installed01 L $T@ 8(tical module10 L F8 Slave AAAA-DDDD? is t&e our (ossiblec&annels and t&e second (art are t&e our (ossible lin' c&annels >@@@@-5555?. , t&is is a conventional >CS$? t9(e re(eater t&e second (art isnot used and set to Iero.
,n 5CDMA re(eaters t&e irst (art >AAAA-DDDD? are t&e doC/U?. T&e
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
84/96
GSM-UMTS Commands and Attributes v1.0.0
/ie$d /ormat (es)ri*tion Si
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
85/96
GSM-UMTS Commands and Attributes v1.0.0
/ie$d /ormat (es)ri*tion Si
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
86/96
GSM-UMTS Commands and Attributes v1.0.0
/ie$d /ormat (es)ri*tion Sinot &e encoded %ust (lain 0-4?
+
$C/ ///// e*etition C')$e or eartbeat re*orts in minutes.T&is is an unsi"ned &e adecimall9 coded
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
87/96
GSM-UMTS Commands and Attributes v1.0.0
1% ALARM S!URCES
T&is section de ines alarm sources in t&e GSM-UMTS tar"et.T&e olloUAD UD7 U!M UDM and U!5?.
Firm
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
88/96
GSM-UMTS Commands and Attributes v1.0.0
Attrib (es)ri*tion C$ass Severit'
$ T $adio board tem(erature 7nvironment Ma%or
$@8 $eceive level o(tical 7 ui(ment Ma%or
$@! $eceive level (ilot tone 7 ui(ment MinorSHD S9nt&esiIer do
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
89/96
GSM-UMTS Commands and Attributes v1.0.0
T&ere ore it is (ossible to calculate t&e e (ected out(ut (o
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
90/96
GSM-UMTS Commands and Attributes v1.0.0
si"nal t&at adversel9 a ects t&e si"nal ualit9. T&e art&er t&e re(eater "oes intosaturation t&e more (roblematic t&is is.
12.5 AS " Am#lifier chain '#lin 5&en t&e "ain settin" in t&e re(eater is too &i"& or a "iven in(ut si"nal t&eam(li ier saturation alarm ma9 be tri""ered. T&is alarm means t&at t&e re(eater isover-am(li 9in" t&e si"nal
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
91/96
GSM-UMTS Commands and Attributes v1.0.0
12.) C3- ? Comm'nicationT&is alarm is re(orted
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
92/96
GSM-UMTS Commands and Attributes v1.0.0
12.1, I3 " In#'t o%erload '#lin ,n(ut overload alarms are tri""ered
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
93/96
GSM-UMTS Commands and Attributes v1.0.0
U((er t&res&old: )+=0 >meanin" )+= AC?#omeanin" )1= AC?Time: 6 seconds.
imits or 11 %AC *o er su**$'U((er t&res&old: 1600 >meanin" 160 AC?#omeanin" 100 AC?Time: 6 seconds.
imits or - 8 %(C *o er su**$'
U((er t&res&old: -2)0 >meanin" -2) AC?#omeanin" -=* AC?Time: 6 seconds.
12.14 PT- " Po0er $'##l& tem#erat're,nside t&e !SU modules are tem(erature sensors. 5&en t&e tem(erature is too &i"&or too lo< t&e alarm is tri""ered.
U((er t&res&old: +=0 >meanin" B+=ZC?#omeanin" -)0ZC?Time: 1= seconds
12.15 P;1 " Po0er 1!o
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
94/96
GSM-UMTS Commands and Attributes v1.0.0
U((er t&res&old: ++0 > Y100? L +.+0 DC#o Y100? L +.)0 DCTime: 6 seconds.
12.1* P;4 " Po0er 4T&e !SU unit contains volta"e meters on t&e DC side. T&is alarm is tri""ered i t&evolta"e is too &i"& or too lo3 " ecei%e le%el o#ticalT&is alarm is tri""ered i t&e ibre-o(tical level in a ibre ed re(eater is too loF8 Master in t&e /U 8MU?.
U((er t&res&old: N A#omeanin" -4.0 d m o(tical?Time: = seconds.
12.21 >P " Pilot tone $tat'$Alarm is tri""ered
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
95/96
8/10/2019 GSM-UMTS Commands and Attributes v1.0.0 v1.3
96/96
GSM-UMTS Commands and Attributes v1.0.0
U((er t&res&old: N A#o